[ARM] Add support for ARM RealView board

Support for RealView EB.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 49 insertions, 0 deletions

diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
new file mode 100644
index 000000000000..2712ba77bb3a
--- /dev/null
+++ b/include/asm-arm/arch-realview/entry-macro.S
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-realview/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/hardware/gic.h>
+
+                .macro  disable_fiq
+                .endm
+
+                /*
+                 * The interrupt numbering scheme is defined in the
+                 * interrupt controller spec.  To wit:
+                 *
+                 * Interrupts 0-15 are IPI
+                 * 16-28 are reserved
+                 * 29-31 are local.  We allow 30 to be used for the watchdog.
+                 * 32-1020 are global
+                 * 1021-1022 are reserved
+                 * 1023 is "spurious" (no interrupt)
+                 *
+                 * For now, we ignore all local interrupts so only return an interrupt if it's
+                 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+                 *
+                 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+                 * valid range for an IRQ (30-1020 inclusive).
+                 */
+
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+                ldr     \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE)
+                ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+                ldr     \tmp, =1021
+
+                bic     \irqnr, \irqstat, #0x1c00
+
+                cmp     \irqnr, #29
+                cmpcc   \irqnr, \irqnr
+                cmpne   \irqnr, \tmp
+                cmpcs   \irqnr, \irqnr
+
+                .endm