Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6

1 files changed, 162 insertions, 0 deletions

diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h
index 9553b54fa5bc..73e0a329cf7f 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-regs.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-regs.h
@@ -81,4 +81,166 @@
 
 #endif
 
+
+/*
+ * Power Manager
+ */
+
+#define PMCR            __REG(0x40F00000)  /* Power Manager Control Register */
+#define PSSR            __REG(0x40F00004)  /* Power Manager Sleep Status Register */
+#define PSPR            __REG(0x40F00008)  /* Power Manager Scratch Pad Register */
+#define PWER            __REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
+#define PRER            __REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER            __REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR            __REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR            __REG(0x40F0001C)  /* Power Manager General Configuration Register */
+#define PGSR0           __REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1           __REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2           __REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3           __REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR            __REG(0x40F00030)  /* Reset Controller Status Register */
+
+#define PSLR            __REG(0x40F00034)       /* Power Manager Sleep Config Register */
+#define PSTR            __REG(0x40F00038)       /* Power Manager Standby Config Register */
+#define PSNR            __REG(0x40F0003C)       /* Power Manager Sense Config Register */
+#define PVCR            __REG(0x40F00040)       /* Power Manager VoltageControl Register */
+#define PKWR            __REG(0x40F00050)       /* Power Manager KB Wake-up Enable Reg */
+#define PKSR            __REG(0x40F00054)       /* Power Manager KB Level-Detect Register */
+#define PCMD(x) __REG2(0x40F00080, (x)<<2)
+#define PCMD0   __REG(0x40F00080 + 0 * 4)
+#define PCMD1   __REG(0x40F00080 + 1 * 4)
+#define PCMD2   __REG(0x40F00080 + 2 * 4)
+#define PCMD3   __REG(0x40F00080 + 3 * 4)
+#define PCMD4   __REG(0x40F00080 + 4 * 4)
+#define PCMD5   __REG(0x40F00080 + 5 * 4)
+#define PCMD6   __REG(0x40F00080 + 6 * 4)
+#define PCMD7   __REG(0x40F00080 + 7 * 4)
+#define PCMD8   __REG(0x40F00080 + 8 * 4)
+#define PCMD9   __REG(0x40F00080 + 9 * 4)
+#define PCMD10  __REG(0x40F00080 + 10 * 4)
+#define PCMD11  __REG(0x40F00080 + 11 * 4)
+#define PCMD12  __REG(0x40F00080 + 12 * 4)
+#define PCMD13  __REG(0x40F00080 + 13 * 4)
+#define PCMD14  __REG(0x40F00080 + 14 * 4)
+#define PCMD15  __REG(0x40F00080 + 15 * 4)
+#define PCMD16  __REG(0x40F00080 + 16 * 4)
+#define PCMD17  __REG(0x40F00080 + 17 * 4)
+#define PCMD18  __REG(0x40F00080 + 18 * 4)
+#define PCMD19  __REG(0x40F00080 + 19 * 4)
+#define PCMD20  __REG(0x40F00080 + 20 * 4)
+#define PCMD21  __REG(0x40F00080 + 21 * 4)
+#define PCMD22  __REG(0x40F00080 + 22 * 4)
+#define PCMD23  __REG(0x40F00080 + 23 * 4)
+#define PCMD24  __REG(0x40F00080 + 24 * 4)
+#define PCMD25  __REG(0x40F00080 + 25 * 4)
+#define PCMD26  __REG(0x40F00080 + 26 * 4)
+#define PCMD27  __REG(0x40F00080 + 27 * 4)
+#define PCMD28  __REG(0x40F00080 + 28 * 4)
+#define PCMD29  __REG(0x40F00080 + 29 * 4)
+#define PCMD30  __REG(0x40F00080 + 30 * 4)
+#define PCMD31  __REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC        (1<<12)
+#define PCMD_DCE        (1<<11)
+#define PCMD_LC (1<<10)
+/* FIXME:  PCMD_SQC need be checked.   */
+#define PCMD_SQC        (3<<8)  /* currently only bit 8 is changeable,
+                                   bit 9 should be 0 all day. */
+#define PVCR_VCSA       (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN    (0x1 << 6)
+
+#define PSSR_OTGPH      (1 << 6)        /* OTG Peripheral control Hold */
+#define PSSR_RDH        (1 << 5)        /* Read Disable Hold */
+#define PSSR_PH         (1 << 4)        /* Peripheral Control Hold */
+#define PSSR_STS        (1 << 3)        /* Standby Mode Status */
+#define PSSR_VFS        (1 << 2)        /* VDD Fault Status */
+#define PSSR_BFS        (1 << 1)        /* Battery Fault Status */
+#define PSSR_SSS        (1 << 0)        /* Software Sleep Status */
+
+#define PSLR_SL_ROD     (1 << 20)       /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO         (1 << 15)       /* RDH Override */
+#define PCFR_PO         (1 << 14)       /* PH Override */
+#define PCFR_GPROD      (1 << 12)       /* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN      (1 << 11)       /* Sleep Mode L1 converter Enable */
+#define PCFR_FVC        (1 << 10)       /* Frequency/Voltage Change */
+#define PCFR_DC_EN      (1 << 7)        /* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN     (1 << 6)        /* Enable PI2C controller */
+#define PCFR_GPR_EN     (1 << 4)        /* nRESET_GPIO Pin Enable */
+#define PCFR_DS         (1 << 3)        /* Deep Sleep Mode */
+#define PCFR_FS         (1 << 2)        /* Float Static Chip Selects */
+#define PCFR_FP         (1 << 1)        /* Float PCMCIA controls */
+#define PCFR_OPDE       (1 << 0)        /* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR        (1 << 3)        /* GPIO Reset */
+#define RCSR_SMR        (1 << 2)        /* Sleep Mode */
+#define RCSR_WDR        (1 << 1)        /* Watchdog Reset */
+#define RCSR_HWR        (1 << 0)        /* Hardware Reset */
+
+#define PWER_GPIO(Nb)   (1 << Nb)       /* GPIO [0..15] wake-up enable     */
+#define PWER_GPIO0      PWER_GPIO (0)   /* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1      PWER_GPIO (1)   /* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2      PWER_GPIO (2)   /* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3      PWER_GPIO (3)   /* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4      PWER_GPIO (4)   /* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5      PWER_GPIO (5)   /* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6      PWER_GPIO (6)   /* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7      PWER_GPIO (7)   /* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8      PWER_GPIO (8)   /* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9      PWER_GPIO (9)   /* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10     PWER_GPIO (10)  /* GPIO [10] wake-up enable        */
+#define PWER_GPIO11     PWER_GPIO (11)  /* GPIO [11] wake-up enable        */
+#define PWER_GPIO12     PWER_GPIO (12)  /* GPIO [12] wake-up enable        */
+#define PWER_GPIO13     PWER_GPIO (13)  /* GPIO [13] wake-up enable        */
+#define PWER_GPIO14     PWER_GPIO (14)  /* GPIO [14] wake-up enable        */
+#define PWER_GPIO15     PWER_GPIO (15)  /* GPIO [15] wake-up enable        */
+#define PWER_RTC        0x80000000      /* RTC alarm wake-up enable        */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR            __REG(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR            __REG(0x4130000C)  /* Core Clock Status Register */
+#define CKEN            __REG(0x41300004)  /* Clock Enable Register */
+#define OSCC            __REG(0x41300008)  /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK     0x0380  /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK     0x0060  /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK     0x001f  /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
+#define CKEN_CAMERA     (24)    /* Camera Interface Clock Enable */
+#define CKEN_SSP1       (23)    /* SSP1 Unit Clock Enable */
+#define CKEN_MEMC       (22)    /* Memory Controller Clock Enable */
+#define CKEN_MEMSTK     (21)    /* Memory Stick Host Controller */
+#define CKEN_IM         (20)    /* Internal Memory Clock Enable */
+#define CKEN_KEYPAD     (19)    /* Keypad Interface Clock Enable */
+#define CKEN_USIM       (18)    /* USIM Unit Clock Enable */
+#define CKEN_MSL        (17)    /* MSL Unit Clock Enable */
+#define CKEN_LCD        (16)    /* LCD Unit Clock Enable */
+#define CKEN_PWRI2C     (15)    /* PWR I2C Unit Clock Enable */
+#define CKEN_I2C        (14)    /* I2C Unit Clock Enable */
+#define CKEN_FICP       (13)    /* FICP Unit Clock Enable */
+#define CKEN_MMC        (12)    /* MMC Unit Clock Enable */
+#define CKEN_USB        (11)    /* USB Unit Clock Enable */
+#define CKEN_ASSP       (10)    /* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST    (10)    /* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER    (9)     /* OS Timer Unit Clock Enable */
+#define CKEN_NSSP       (9)     /* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S        (8)     /* I2S Unit Clock Enable */
+#define CKEN_BTUART     (7)     /* BTUART Unit Clock Enable */
+#define CKEN_FFUART     (6)     /* FFUART Unit Clock Enable */
+#define CKEN_STUART     (5)     /* STUART Unit Clock Enable */
+#define CKEN_HWUART     (4)     /* HWUART Unit Clock Enable */
+#define CKEN_SSP3       (4)     /* SSP3 Unit Clock Enable */
+#define CKEN_SSP        (3)     /* SSP Unit Clock Enable */
+#define CKEN_SSP2       (3)     /* SSP2 Unit Clock Enable */
+#define CKEN_AC97       (2)     /* AC97 Unit Clock Enable */
+#define CKEN_PWM1       (1)     /* PWM1 Clock Enable */
+#define CKEN_PWM0       (0)     /* PWM0 Clock Enable */
+
+#define OSCC_OON        (1 << 1)        /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK        (1 << 0)        /* 32.768kHz OOK (read-only bit) */
+
 #endif