[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 75 deletions

diff --git a/include/asm-arm/arch-pxa/pcm027.h b/include/asm-arm/arch-pxa/pcm027.h
deleted file mode 100644
index 7beae1472c3e..000000000000
--- a/include/asm-arm/arch-pxa/pcm027.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pcm027.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Definitions of CPU card resources only
- */
-
-/* I2C RTC */
-#define PCM027_RTC_IRQ_GPIO     0
-#define PCM027_RTC_IRQ          IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
-#define PCM027_RTC_IRQ_EDGE     IRQ_TYPE_EDGE_FALLING
-#define ADR_PCM027_RTC          0x51    /* I2C address */
-
-/* I2C EEPROM */
-#define ADR_PCM027_EEPROM       0x54    /* I2C address */
-
-/* Ethernet chip (SMSC91C111) */
-#define PCM027_ETH_IRQ_GPIO     52
-#define PCM027_ETH_IRQ          IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
-#define PCM027_ETH_IRQ_EDGE     IRQ_TYPE_EDGE_RISING
-#define PCM027_ETH_PHYS         PXA_CS5_PHYS
-#define PCM027_ETH_SIZE         (1*1024*1024)
-
-/* CAN controller SJA1000 (unsupported yet) */
-#define PCM027_CAN_IRQ_GPIO     114
-#define PCM027_CAN_IRQ          IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
-#define PCM027_CAN_IRQ_EDGE     IRQ_TYPE_EDGE_FALLING
-#define PCM027_CAN_PHYS         0x22000000
-#define PCM027_CAN_SIZE         0x100
-
-/* SPI GPIO expander (unsupported yet) */
-#define PCM027_EGPIO_IRQ_GPIO   27
-#define PCM027_EGPIO_IRQ        IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
-#define PCM027_EGPIO_IRQ_EDGE   IRQ_TYPE_EDGE_FALLING
-#define PCM027_EGPIO_CS         24
-/*
- * TODO: Switch this pin from dedicated usage to GPIO if
- * more than the MAX7301 device is connected to this SPI bus
- */
-#define PCM027_EGPIO_CS_MODE    GPIO24_SFRM_MD
-
-/* Flash memory */
-#define PCM027_FLASH_PHYS       0x00000000
-#define PCM027_FLASH_SIZE       0x02000000
-
-/* onboard LEDs connected to GPIO */
-#define PCM027_LED_CPU          90
-#define PCM027_LED_HEARD_BEAT   91
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own basebaord init function and call it from
- * inside pcm027_init(). This example here is for the developmen board.
- * Refer pcm990-baseboard.c
- */
-extern void pcm990_baseboard_init(void);