ARM: OMAP: USB: Change omap USB code to use omap_read/write instead of __REG

Change omap USB code to use omap_read/write instead of __REG for multi-omap

Cc: David Brownell <david-b@pacbell.net>
Cc: linux-usb@vger.kernel.org
Cc: i2c@lm-sensors.org
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 10 insertions, 13 deletions

diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
index 2147d18aaeae..ddf1861e6df9 100644
--- a/include/asm-arm/arch-omap/usb.h
+++ b/include/asm-arm/arch-omap/usb.h
@@ -34,11 +34,8 @@
 /*
  * OTG and transceiver registers, for OMAPs starting with ARM926
  */
-#define OTG_REG32(offset)               __REG32(OTG_BASE + (offset))
-#define OTG_REG16(offset)               __REG16(OTG_BASE + (offset))
-
-#define OTG_REV_REG                     OTG_REG32(0x00)
-#define OTG_SYSCON_1_REG                OTG_REG32(0x04)
+#define OTG_REV                         (OTG_BASE + 0x00)
+#define OTG_SYSCON_1                    (OTG_BASE + 0x04)
 #       define   USB2_TRX_MODE(w)       (((w)>>24)&0x07)
 #       define   USB1_TRX_MODE(w)       (((w)>>20)&0x07)
 #       define   USB0_TRX_MODE(w)       (((w)>>16)&0x07)
@@ -47,7 +44,7 @@
 #       define   DEV_IDLE_EN            (1 << 13)
 #       define   OTG_RESET_DONE         (1 << 2)
 #       define   OTG_SOFT_RESET         (1 << 1)
-#define OTG_SYSCON_2_REG                OTG_REG32(0x08)
+#define OTG_SYSCON_2                    (OTG_BASE + 0x08)
 #       define   OTG_EN                 (1 << 31)
 #       define   USBX_SYNCHRO           (1 << 30)
 #       define   OTG_MST16              (1 << 29)
@@ -65,7 +62,7 @@
 #       define   HMC_TLLSPEED           (1 << 7)
 #       define   HMC_TLLATTACH          (1 << 6)
 #       define   OTG_HMC(w)             (((w)>>0)&0x3f)
-#define OTG_CTRL_REG                    OTG_REG32(0x0c)
+#define OTG_CTRL                        (OTG_BASE + 0x0c)
 #       define   OTG_USB2_EN            (1 << 29)
 #       define   OTG_USB2_DP            (1 << 28)
 #       define   OTG_USB2_DM            (1 << 27)
@@ -92,7 +89,7 @@
 #       define   OTG_PD_VBUS            (1 << 2)
 #       define   OTG_PU_VBUS            (1 << 1)
 #       define   OTG_PU_ID              (1 << 0)
-#define OTG_IRQ_EN_REG                  OTG_REG16(0x10)
+#define OTG_IRQ_EN                      (OTG_BASE + 0x10)       /* 16-bit */
 #       define   DRIVER_SWITCH          (1 << 15)
 #       define   A_VBUS_ERR             (1 << 13)
 #       define   A_REQ_TMROUT           (1 << 12)
@@ -102,9 +99,9 @@
 #       define   B_SRP_DONE             (1 << 8)
 #       define   B_SRP_STARTED          (1 << 7)
 #       define   OPRT_CHG               (1 << 0)
-#define OTG_IRQ_SRC_REG                 OTG_REG16(0x14)
+#define OTG_IRQ_SRC                     (OTG_BASE + 0x14)       /* 16-bit */
         // same bits as in IRQ_EN
-#define OTG_OUTCTRL_REG                 OTG_REG16(0x18)
+#define OTG_OUTCTRL                     (OTG_BASE + 0x18)       /* 16-bit */
 #       define   OTGVPD                 (1 << 14)
 #       define   OTGVPU                 (1 << 13)
 #       define   OTGPUID                (1 << 12)
@@ -117,13 +114,13 @@
 #       define   USB0VDR                (1 << 2)
 #       define   USB0PDEN               (1 << 1)
 #       define   USB0PUEN               (1 << 0)
-#define OTG_TEST_REG                    OTG_REG16(0x20)
-#define OTG_VENDOR_CODE_REG             OTG_REG32(0xfc)
+#define OTG_TEST                        (OTG_BASE + 0x20)       /* 16-bit */
+#define OTG_VENDOR_CODE                 (OTG_BASE + 0xfc)       /* 16-bit */
 
 /*-------------------------------------------------------------------------*/
 
 /* OMAP1 */
-#define USB_TRANSCEIVER_CTRL_REG        __REG32(0xfffe1000 + 0x0064)
+#define USB_TRANSCEIVER_CTRL            (0xfffe1000 + 0x0064)
 #       define  CONF_USB2_UNI_R         (1 << 8)
 #       define  CONF_USB1_UNI_R         (1 << 7)
 #       define  CONF_USB_PORT0_R(x)     (((x)>>4)&0x7)