Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 324 insertions, 0 deletions

diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
new file mode 100644
index 000000000000..37e06c782bdf
--- /dev/null
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -0,0 +1,324 @@
+/*
+ * linux/include/asm-arm/arch-omap/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *       file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <linux/config.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <asm/arch/cpu.h>
+#endif
+#include <asm/arch/io.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *       files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE         (0xfffece00)
+#define ARM_CKCTL               (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1             (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2             (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT              (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1              (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2              (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST               (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3             (CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF                1
+#define CK_IDLEF                2
+#define CK_ENABLEF              4
+#define CK_SELECTF              8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL                (0xfffecf00)
+
+/* DSP clock control */
+#define DSP_CONFIG_REG_BASE     (0xe1008000)
+#define DSP_IDLECT1             (DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2             (DSP_CONFIG_REG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE           (0xfffe0800)
+#define ULPD_IT_STATUS          (ULPD_REG_BASE + 0x14)
+#define ULPD_CLOCK_CTRL         (ULPD_REG_BASE + 0x30)
+#       define DIS_USB_PVCI_CLK         (1 << 5)        /* no USB/FAC synch */
+#       define USB_MCLK_EN              (1 << 4)        /* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ           (ULPD_REG_BASE + 0x34)
+#       define SOFT_UDC_REQ             (1 << 4)
+#       define SOFT_USB_CLK_REQ         (1 << 3)
+#       define SOFT_DPLL_REQ            (1 << 0)
+#define ULPD_DPLL_CTRL          (ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ         (ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL          (ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL         (ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG       (ULPD_REG_BASE + 0x68)
+#       define DIS_MMC2_DPLL_REQ        (1 << 11)
+#       define DIS_MMC1_DPLL_REQ        (1 << 10)
+#       define DIS_UART3_DPLL_REQ       (1 << 9)
+#       define DIS_UART2_DPLL_REQ       (1 << 8)
+#       define DIS_UART1_DPLL_REQ       (1 << 7)
+#       define DIS_USB_HOST_DPLL_REQ    (1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL       (ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL       (ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE  (0xfffec800)
+#define OMAP_WDT_TIMER          (OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE     (OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH1_BASE           0xfffecb00
+#define OMAP_IH2_BASE           0xfffe0000
+
+#define OMAP_IH1_ITR            (OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR            (OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ        (OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ        (OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL        (OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0           (OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR            (OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR            (OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR            (OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ        (OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ        (OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL        (OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0           (OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR            (OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET      0x00
+#define IRQ_MIR_REG_OFFSET      0x04
+#define IRQ_SIR_IRQ_REG_OFFSET  0x10
+#define IRQ_SIR_FIQ_REG_OFFSET  0x14
+#define IRQ_CONTROL_REG_OFFSET  0x18
+#define IRQ_ISR_REG_OFFSET      0x9c
+#define IRQ_ILR0_REG_OFFSET     0x1c
+#define IRQ_GMR_REG_OFFSET      0xa0
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0         0xfffe1080
+#define MOD_CONF_CTRL_1         0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0         0xfffe1000
+#define FUNC_MUX_CTRL_1         0xfffe1004
+#define FUNC_MUX_CTRL_2         0xfffe1008
+#define COMP_MODE_CTRL_0        0xfffe100c
+#define FUNC_MUX_CTRL_3         0xfffe1010
+#define FUNC_MUX_CTRL_4         0xfffe1014
+#define FUNC_MUX_CTRL_5         0xfffe1018
+#define FUNC_MUX_CTRL_6         0xfffe101C
+#define FUNC_MUX_CTRL_7         0xfffe1020
+#define FUNC_MUX_CTRL_8         0xfffe1024
+#define FUNC_MUX_CTRL_9         0xfffe1028
+#define FUNC_MUX_CTRL_A         0xfffe102C
+#define FUNC_MUX_CTRL_B         0xfffe1030
+#define FUNC_MUX_CTRL_C         0xfffe1034
+#define FUNC_MUX_CTRL_D         0xfffe1038
+#define PULL_DWN_CTRL_0         0xfffe1040
+#define PULL_DWN_CTRL_1         0xfffe1044
+#define PULL_DWN_CTRL_2         0xfffe1048
+#define PULL_DWN_CTRL_3         0xfffe104c
+#define PULL_DWN_CTRL_4         0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E         0xfffe1090
+#define FUNC_MUX_CTRL_F         0xfffe1094
+#define FUNC_MUX_CTRL_10        0xfffe1098
+#define FUNC_MUX_CTRL_11        0xfffe109c
+#define FUNC_MUX_CTRL_12        0xfffe10a0
+#define PU_PD_SEL_0             0xfffe10b4
+#define PU_PD_SEL_1             0xfffe10b8
+#define PU_PD_SEL_2             0xfffe10bc
+#define PU_PD_SEL_3             0xfffe10c0
+#define PU_PD_SEL_4             0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE      0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE           0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL            (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE          0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL           (TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE                       (0xfffec900)
+#define MPUI_CTRL                       (MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR                 (MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA                 (MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG                 (MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG                 (MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS                 (MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG            (MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG             (MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE                  0xfffbd000
+#define OMAP_LPG2_BASE                  0xfffbd800
+#define OMAP_LPG1_LCR                   (OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR                   (OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR                   (OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR                   (OMAP_LPG2_BASE + 0x04)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * ---------------------------------------------------------------------------
+ * Serial ports
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_UART1_BASE         (unsigned char *)0xfffb0000
+#define OMAP_UART2_BASE         (unsigned char *)0xfffb0800
+#define OMAP_UART3_BASE         (unsigned char *)0xfffb9800
+#define OMAP_MAX_NR_PORTS       3
+#define OMAP1510_BASE_BAUD      (12000000/16)
+#define OMAP16XX_BASE_BAUD      (48000000/16)
+
+#define is_omap_port(p) ({int __ret = 0;                        \
+                        if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
+                            p == IO_ADDRESS(OMAP_UART2_BASE) || \
+                            p == IO_ADDRESS(OMAP_UART3_BASE))   \
+                                __ret = 1;                      \
+                        __ret;                                  \
+                        })
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP730
+#include "omap730.h"
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+#include "omap1510.h"
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+#include "omap16xx.h"
+#endif
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#include "board-innovator.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H2
+#include "board-h2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#include "board-perseus2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H3
+#include "board-h3.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4
+#include "board-h4.h"
+#error "Support for H4 board not yet implemented."
+#endif
+
+#ifdef CONFIG_MACH_OMAP_OSK
+#include "board-osk.h"
+#endif
+
+#ifdef CONFIG_MACH_VOICEBLUE
+#include "board-voiceblue.h"
+#endif
+
+#ifdef CONFIG_MACH_NETSTAR
+#include "board-netstar.h"
+#endif
+
+#endif /* !__ASSEMBLER__ */
+
+#endif  /* __ASM_ARCH_OMAP_HARDWARE_H */