[ARM] 3950/1: AT91: Split up system header file

The AT91RM9200 system header file (at91rm9200_sys.h) has been split into
separate header files for each peripheral.  This was necessary since
some of the system peripherals are also used on AT91SAM9260 and
AT91SAM9261.

The new SAM9-specific register bits have also been defined.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 160 insertions, 0 deletions

diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
new file mode 100644
index 000000000000..0c0d81480b3a
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
@@ -0,0 +1,160 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR             (AT91_MC + 0x00)        /* MC Remap Control Register */
+#define         AT91_MC_RCB             (1 <<  0)               /* Remap Command Bit */
+
+#define AT91_MC_ASR             (AT91_MC + 0x04)        /* MC Abort Status Register */
+#define         AT91_MC_UNADD           (1 <<  0)               /* Undefined Address Abort Status */
+#define         AT91_MC_MISADD          (1 <<  1)               /* Misaligned Address Abort Status */
+#define         AT91_MC_ABTSZ           (3 <<  8)               /* Abort Size Status */
+#define                 AT91_MC_ABTSZ_BYTE              (0 << 8)
+#define                 AT91_MC_ABTSZ_HALFWORD          (1 << 8)
+#define                 AT91_MC_ABTSZ_WORD              (2 << 8)
+#define         AT91_MC_ABTTYP          (3 << 10)               /* Abort Type Status */
+#define                 AT91_MC_ABTTYP_DATAREAD         (0 << 10)
+#define                 AT91_MC_ABTTYP_DATAWRITE        (1 << 10)
+#define                 AT91_MC_ABTTYP_FETCH            (2 << 10)
+#define         AT91_MC_MST0            (1 << 16)               /* ARM920T Abort Source */
+#define         AT91_MC_MST1            (1 << 17)               /* PDC Abort Source */
+#define         AT91_MC_MST2            (1 << 18)               /* UHP Abort Source */
+#define         AT91_MC_MST3            (1 << 19)               /* EMAC Abort Source */
+#define         AT91_MC_SVMST0          (1 << 24)               /* Saved ARM920T Abort Source */
+#define         AT91_MC_SVMST1          (1 << 25)               /* Saved PDC Abort Source */
+#define         AT91_MC_SVMST2          (1 << 26)               /* Saved UHP Abort Source */
+#define         AT91_MC_SVMST3          (1 << 27)               /* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR            (AT91_MC + 0x08)        /* MC Abort Address Status Register */
+
+#define AT91_MC_MPR             (AT91_MC + 0x0c)        /* MC Master Priority Register */
+#define         AT91_MPR_MSTP0          (7 <<  0)               /* ARM920T Priority */
+#define         AT91_MPR_MSTP1          (7 <<  4)               /* PDC Priority */
+#define         AT91_MPR_MSTP2          (7 <<  8)               /* UHP Priority */
+#define         AT91_MPR_MSTP3          (7 << 12)               /* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA            (AT91_MC + 0x60)        /* Chip Select Assignment Register */
+#define         AT91_EBI_CS0A           (1 << 0)                /* Chip Select 0 Assignment */
+#define                 AT91_EBI_CS0A_SMC               (0 << 0)
+#define                 AT91_EBI_CS0A_BFC               (1 << 0)
+#define         AT91_EBI_CS1A           (1 << 1)                /* Chip Select 1 Assignment */
+#define                 AT91_EBI_CS1A_SMC               (0 << 1)
+#define                 AT91_EBI_CS1A_SDRAMC            (1 << 1)
+#define         AT91_EBI_CS3A           (1 << 3)                /* Chip Select 2 Assignment */
+#define                 AT91_EBI_CS3A_SMC               (0 << 3)
+#define                 AT91_EBI_CS3A_SMC_SMARTMEDIA    (1 << 3)
+#define         AT91_EBI_CS4A           (1 << 4)                /* Chip Select 3 Assignment */
+#define                 AT91_EBI_CS4A_SMC               (0 << 4)
+#define                 AT91_EBI_CS4A_SMC_COMPACTFLASH  (1 << 4)
+#define AT91_EBI_CFGR           (AT91_MC + 0x64)        /* Configuration Register */
+#define         AT91_EBI_DBPUC          (1 << 0)                /* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_CSR(n)         (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define         AT91_SMC_NWS            (0x7f <<  0)            /* Number of Wait States */
+#define                 AT91_SMC_NWS_(x)        ((x) << 0)
+#define         AT91_SMC_WSEN           (1    <<  7)            /* Wait State Enable */
+#define         AT91_SMC_TDF            (0xf  <<  8)            /* Data Float Time */
+#define                 AT91_SMC_TDF_(x)        ((x) << 8)
+#define         AT91_SMC_BAT            (1    << 12)            /* Byte Access Type */
+#define         AT91_SMC_DBW            (3    << 13)            /* Data Bus Width */
+#define                 AT91_SMC_DBW_16         (1 << 13)
+#define                 AT91_SMC_DBW_8          (2 << 13)
+#define         AT91_SMC_DPR            (1 << 15)               /* Data Read Protocol */
+#define         AT91_SMC_ACSS           (3 << 16)               /* Address to Chip Select Setup */
+#define                 AT91_SMC_ACSS_STD       (0 << 16)
+#define                 AT91_SMC_ACSS_1         (1 << 16)
+#define                 AT91_SMC_ACSS_2         (2 << 16)
+#define                 AT91_SMC_ACSS_3         (3 << 16)
+#define         AT91_SMC_RWSETUP        (7 << 24)               /* Read & Write Signal Time Setup */
+#define                 AT91_SMC_RWSETUP_(x)    ((x) << 24)
+#define         AT91_SMC_RWHOLD         (7 << 28)               /* Read & Write Signal Hold Time */
+#define                 AT91_SMC_RWHOLD_(x)     ((x) << 28)
+
+/* SDRAM Controller registers */
+#define AT91_SDRAMC_MR          (AT91_MC + 0x90)        /* Mode Register */
+#define         AT91_SDRAMC_MODE        (0xf << 0)              /* Command Mode */
+#define                 AT91_SDRAMC_MODE_NORMAL         (0 << 0)
+#define                 AT91_SDRAMC_MODE_NOP            (1 << 0)
+#define                 AT91_SDRAMC_MODE_PRECHARGE      (2 << 0)
+#define                 AT91_SDRAMC_MODE_LMR            (3 << 0)
+#define                 AT91_SDRAMC_MODE_REFRESH        (4 << 0)
+#define         AT91_SDRAMC_DBW         (1   << 4)              /* Data Bus Width */
+#define                 AT91_SDRAMC_DBW_32      (0 << 4)
+#define                 AT91_SDRAMC_DBW_16      (1 << 4)
+
+#define AT91_SDRAMC_TR          (AT91_MC + 0x94)        /* Refresh Timer Register */
+#define         AT91_SDRAMC_COUNT       (0xfff << 0)            /* Refresh Timer Count */
+
+#define AT91_SDRAMC_CR          (AT91_MC + 0x98)        /* Configuration Register */
+#define         AT91_SDRAMC_NC          (3   <<  0)             /* Number of Column Bits */
+#define                 AT91_SDRAMC_NC_8        (0 << 0)
+#define                 AT91_SDRAMC_NC_9        (1 << 0)
+#define                 AT91_SDRAMC_NC_10       (2 << 0)
+#define                 AT91_SDRAMC_NC_11       (3 << 0)
+#define         AT91_SDRAMC_NR          (3   <<  2)             /* Number of Row Bits */
+#define                 AT91_SDRAMC_NR_11       (0 << 2)
+#define                 AT91_SDRAMC_NR_12       (1 << 2)
+#define                 AT91_SDRAMC_NR_13       (2 << 2)
+#define         AT91_SDRAMC_NB          (1   <<  4)             /* Number of Banks */
+#define                 AT91_SDRAMC_NB_2        (0 << 4)
+#define                 AT91_SDRAMC_NB_4        (1 << 4)
+#define         AT91_SDRAMC_CAS         (3   <<  5)             /* CAS Latency */
+#define                 AT91_SDRAMC_CAS_2       (2 << 5)
+#define         AT91_SDRAMC_TWR         (0xf <<  7)             /* Write Recovery Delay */
+#define         AT91_SDRAMC_TRC         (0xf << 11)             /* Row Cycle Delay */
+#define         AT91_SDRAMC_TRP         (0xf << 15)             /* Row Precharge Delay */
+#define         AT91_SDRAMC_TRCD        (0xf << 19)             /* Row to Column Delay */
+#define         AT91_SDRAMC_TRAS        (0xf << 23)             /* Active to Precharge Delay */
+#define         AT91_SDRAMC_TXSR        (0xf << 27)             /* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_SRR         (AT91_MC + 0x9c)        /* Self Refresh Register */
+#define AT91_SDRAMC_LPR         (AT91_MC + 0xa0)        /* Low Power Register */
+#define AT91_SDRAMC_IER         (AT91_MC + 0xa4)        /* Interrupt Enable Register */
+#define AT91_SDRAMC_IDR         (AT91_MC + 0xa8)        /* Interrupt Disable Register */
+#define AT91_SDRAMC_IMR         (AT91_MC + 0xac)        /* Interrupt Mask Register */
+#define AT91_SDRAMC_ISR         (AT91_MC + 0xb0)        /* Interrupt Status Register */
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR             (AT91_MC + 0xc0)        /* Mode Register */
+#define         AT91_BFC_BFCOM          (3   <<  0)             /* Burst Flash Controller Operating Mode */
+#define                 AT91_BFC_BFCOM_DISABLED (0 << 0)
+#define                 AT91_BFC_BFCOM_ASYNC    (1 << 0)
+#define                 AT91_BFC_BFCOM_BURST    (2 << 0)
+#define         AT91_BFC_BFCC           (3   <<  2)             /* Burst Flash Controller Clock */
+#define                 AT91_BFC_BFCC_MCK       (1 << 2)
+#define                 AT91_BFC_BFCC_DIV2      (2 << 2)
+#define                 AT91_BFC_BFCC_DIV4      (3 << 2)
+#define         AT91_BFC_AVL            (0xf <<  4)             /* Address Valid Latency */
+#define         AT91_BFC_PAGES          (7   <<  8)             /* Page Size */
+#define                 AT91_BFC_PAGES_NO_PAGE  (0 << 8)
+#define                 AT91_BFC_PAGES_16       (1 << 8)
+#define                 AT91_BFC_PAGES_32       (2 << 8)
+#define                 AT91_BFC_PAGES_64       (3 << 8)
+#define                 AT91_BFC_PAGES_128      (4 << 8)
+#define                 AT91_BFC_PAGES_256      (5 << 8)
+#define                 AT91_BFC_PAGES_512      (6 << 8)
+#define                 AT91_BFC_PAGES_1024     (7 << 8)
+#define         AT91_BFC_OEL            (3   << 12)             /* Output Enable Latency */
+#define         AT91_BFC_BAAEN          (1   << 16)             /* Burst Address Advance Enable */
+#define         AT91_BFC_BFOEH          (1   << 17)             /* Burst Flash Output Enable Handling */
+#define         AT91_BFC_MUXEN          (1   << 18)             /* Multiplexed Bus Enable */
+#define         AT91_BFC_RDYEN          (1   << 19)             /* Ready Enable Mode */
+
+#endif