[ARM] 3950/1: AT91: Split up system header file

The AT91RM9200 system header file (at91rm9200_sys.h) has been split into
separate header files for each peripheral.  This was necessary since
some of the system peripherals are also used on AT91SAM9260 and
AT91SAM9261.

The new SAM9-specific register bits have also been defined.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 53 insertions, 0 deletions

diff --git a/include/asm-arm/arch-at91rm9200/at91_aic.h b/include/asm-arm/arch-at91rm9200/at91_aic.h
new file mode 100644
index 000000000000..267e69812e26
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91_aic.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91_aic.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Advanced Interrupt Controller (AIC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_AIC_H
+#define AT91_AIC_H
+
+#define AT91_AIC_SMR(n)         (AT91_AIC + ((n) * 4))  /* Source Mode Registers 0-31 */
+#define         AT91_AIC_PRIOR          (7 << 0)                /* Priority Level */
+#define         AT91_AIC_SRCTYPE        (3 << 5)                /* Interrupt Source Type */
+#define                 AT91_AIC_SRCTYPE_LOW            (0 << 5)
+#define                 AT91_AIC_SRCTYPE_FALLING        (1 << 5)
+#define                 AT91_AIC_SRCTYPE_HIGH           (2 << 5)
+#define                 AT91_AIC_SRCTYPE_RISING         (3 << 5)
+
+#define AT91_AIC_SVR(n)         (AT91_AIC + 0x80 + ((n) * 4))   /* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR            (AT91_AIC + 0x100)      /* Interrupt Vector Register */
+#define AT91_AIC_FVR            (AT91_AIC + 0x104)      /* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR            (AT91_AIC + 0x108)      /* Interrupt Status Register */
+#define         AT91_AIC_IRQID          (0x1f << 0)             /* Current Interrupt Identifier */
+
+#define AT91_AIC_IPR            (AT91_AIC + 0x10c)      /* Interrupt Pending Register */
+#define AT91_AIC_IMR            (AT91_AIC + 0x110)      /* Interrupt Mask Register */
+#define AT91_AIC_CISR           (AT91_AIC + 0x114)      /* Core Interrupt Status Register */
+#define         AT91_AIC_NFIQ           (1 << 0)                /* nFIQ Status */
+#define         AT91_AIC_NIRQ           (1 << 1)                /* nIRQ Status */
+
+#define AT91_AIC_IECR           (AT91_AIC + 0x120)      /* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR           (AT91_AIC + 0x124)      /* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR           (AT91_AIC + 0x128)      /* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR           (AT91_AIC + 0x12c)      /* Interrupt Set Command Register */
+#define AT91_AIC_EOICR          (AT91_AIC + 0x130)      /* End of Interrupt Command Register */
+#define AT91_AIC_SPU            (AT91_AIC + 0x134)      /* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR            (AT91_AIC + 0x138)      /* Debug Control Register */
+#define         AT91_AIC_DCR_PROT       (1 << 0)                /* Protection Mode */
+#define         AT91_AIC_DCR_GMSK       (1 << 1)                /* General Mask */
+
+#define AT91_AIC_FFER           (AT91_AIC + 0x140)      /* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR           (AT91_AIC + 0x144)      /* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR           (AT91_AIC + 0x148)      /* Fast Forcing Status Register [SAM9 only] */
+
+#endif