[ARM] 4143/1: AT91: Prepare for AT91SAM9263 support

The Atmel AT91SAM9263 processor includes many more integrated
peripherals than Atmel's previous ARM9-based AT91 processors, so this
has necessitated a few changes to the core AT91 support.

These changes are:
      * The system peripheral I/O region we remap has increased from
        0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF.
      * The increased I/O region forces changes to entry-macro.S and
        debug-macro.S due to ARM's limited immediate offset addressing
        modes.
      * Maximum number of GPIO banks increases to 5.
      * 2 MMC controllers so the board-setup code needs to specify which
        controller it wishes to use when calling at91_add_device_mmc().

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 5 insertions, 5 deletions

diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
index a6f33832a178..76c8cccf73aa 100644
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ b/include/asm-arm/arch-at91/entry-macro.S
@@ -17,10 +17,10 @@
         .endm
 
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-        ldr     \base, =(AT91_VA_BASE_SYS)              @ base virtual address of SYS peripherals
-        ldr     \irqnr, [\base, #AT91_AIC_IVR]          @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-        ldr     \irqstat, [\base, #AT91_AIC_ISR]        @ read interrupt source number
-        teq     \irqstat, #0                            @ ISR is 0 when no current interrupt, or spurious interrupt
-        streq   \tmp, [\base, #AT91_AIC_EOICR]          @ not going to be handled further, then ACK it now.
+        ldr     \base, =(AT91_VA_BASE_SYS + AT91_AIC)           @ base virtual address of AIC peripheral
+        ldr     \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]     @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+        ldr     \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]   @ read interrupt source number
+        teq     \irqstat, #0                                    @ ISR is 0 when no current interrupt, or spurious interrupt
+        streq   \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]     @ not going to be handled further, then ACK it now.
         .endm