diff options
author | Hans Verkuil <hans.verkuil@cisco.com> | 2012-07-18 04:45:16 -0400 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-09-13 15:13:47 -0400 |
commit | 54450f591c9927496b3d41c041fa802d0ef96885 (patch) | |
tree | 8a7074140800b2097d2c4804742612bede7ea0c9 /drivers | |
parent | c61bd6a0e2a92009f3879457eeec75b5ad102303 (diff) |
[media] adv7604: driver for the Analog Devices ADV7604 video decoder
Initial version of this driver.
The full datasheets are available from the Analog Devices website:
http://ez.analog.com/docs/DOC-1545
Not all features of the receiver are supported by this driver for various
reasons. Most notably:
- No CEC support (the CEC API needs a lot more discussion)
- Only port A of the four HDMI input ports is implemented (our hardware only
uses that port)
- No HDCP repeater support (we don't use that either)
And since there are some 600-odd pages of datasheet for this single device,
I'm sure that there are many more things missing, but this driver does work
well for our hardware.
Note that I am using the register addresses instead of register names: the
datasheet containing the register descriptions is organized by register
address. Using names would make the datasheet lookup very hard. An attempt
was made to try and document what is being done when registers are used
instead.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/media/i2c/Kconfig | 12 | ||||
-rw-r--r-- | drivers/media/i2c/Makefile | 1 | ||||
-rw-r--r-- | drivers/media/i2c/adv7604.c | 1959 |
3 files changed, 1972 insertions, 0 deletions
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 9a5a059c1bde..322093ccadcb 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig | |||
@@ -188,6 +188,18 @@ config VIDEO_ADV7183 | |||
188 | To compile this driver as a module, choose M here: the | 188 | To compile this driver as a module, choose M here: the |
189 | module will be called adv7183. | 189 | module will be called adv7183. |
190 | 190 | ||
191 | config VIDEO_ADV7604 | ||
192 | tristate "Analog Devices ADV7604 decoder" | ||
193 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | ||
194 | ---help--- | ||
195 | Support for the Analog Devices ADV7604 video decoder. | ||
196 | |||
197 | This is a Analog Devices Component/Graphics Digitizer | ||
198 | with 4:1 Multiplexed HDMI Receiver. | ||
199 | |||
200 | To compile this driver as a module, choose M here: the | ||
201 | module will be called adv7604. | ||
202 | |||
191 | config VIDEO_BT819 | 203 | config VIDEO_BT819 |
192 | tristate "BT819A VideoStream decoder" | 204 | tristate "BT819A VideoStream decoder" |
193 | depends on VIDEO_V4L2 && I2C | 205 | depends on VIDEO_V4L2 && I2C |
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 088a46015605..4954d403fb69 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile | |||
@@ -25,6 +25,7 @@ obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o | |||
25 | obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o | 25 | obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o |
26 | obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o | 26 | obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o |
27 | obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o | 27 | obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o |
28 | obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o | ||
28 | obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o | 29 | obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o |
29 | obj-$(CONFIG_VIDEO_VS6624) += vs6624.o | 30 | obj-$(CONFIG_VIDEO_VS6624) += vs6624.o |
30 | obj-$(CONFIG_VIDEO_BT819) += bt819.o | 31 | obj-$(CONFIG_VIDEO_BT819) += bt819.o |
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c new file mode 100644 index 000000000000..109bc9b12e74 --- /dev/null +++ b/drivers/media/i2c/adv7604.c | |||
@@ -0,0 +1,1959 @@ | |||
1 | /* | ||
2 | * adv7604 - Analog Devices ADV7604 video decoder driver | ||
3 | * | ||
4 | * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. | ||
5 | * | ||
6 | * This program is free software; you may redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License as published by | ||
8 | * the Free Software Foundation; version 2 of the License. | ||
9 | * | ||
10 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | ||
11 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | ||
12 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | ||
13 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | ||
14 | * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | ||
15 | * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | ||
16 | * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | ||
17 | * SOFTWARE. | ||
18 | * | ||
19 | */ | ||
20 | |||
21 | /* | ||
22 | * References (c = chapter, p = page): | ||
23 | * REF_01 - Analog devices, ADV7604, Register Settings Recommendations, | ||
24 | * Revision 2.5, June 2010 | ||
25 | * REF_02 - Analog devices, Register map documentation, Documentation of | ||
26 | * the register maps, Software manual, Rev. F, June 2010 | ||
27 | * REF_03 - Analog devices, ADV7604, Hardware Manual, Rev. F, August 2010 | ||
28 | */ | ||
29 | |||
30 | |||
31 | #include <linux/kernel.h> | ||
32 | #include <linux/module.h> | ||
33 | #include <linux/slab.h> | ||
34 | #include <linux/i2c.h> | ||
35 | #include <linux/delay.h> | ||
36 | #include <linux/videodev2.h> | ||
37 | #include <linux/workqueue.h> | ||
38 | #include <linux/v4l2-dv-timings.h> | ||
39 | #include <media/v4l2-device.h> | ||
40 | #include <media/v4l2-ctrls.h> | ||
41 | #include <media/v4l2-chip-ident.h> | ||
42 | #include <media/adv7604.h> | ||
43 | |||
44 | static int debug; | ||
45 | module_param(debug, int, 0644); | ||
46 | MODULE_PARM_DESC(debug, "debug level (0-2)"); | ||
47 | |||
48 | MODULE_DESCRIPTION("Analog Devices ADV7604 video decoder driver"); | ||
49 | MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>"); | ||
50 | MODULE_AUTHOR("Mats Randgaard <mats.randgaard@cisco.com>"); | ||
51 | MODULE_LICENSE("GPL"); | ||
52 | |||
53 | /* ADV7604 system clock frequency */ | ||
54 | #define ADV7604_fsc (28636360) | ||
55 | |||
56 | #define DIGITAL_INPUT ((state->prim_mode == ADV7604_PRIM_MODE_HDMI_COMP) || \ | ||
57 | (state->prim_mode == ADV7604_PRIM_MODE_HDMI_GR)) | ||
58 | |||
59 | /* | ||
60 | ********************************************************************** | ||
61 | * | ||
62 | * Arrays with configuration parameters for the ADV7604 | ||
63 | * | ||
64 | ********************************************************************** | ||
65 | */ | ||
66 | struct adv7604_state { | ||
67 | struct adv7604_platform_data pdata; | ||
68 | struct v4l2_subdev sd; | ||
69 | struct media_pad pad; | ||
70 | struct v4l2_ctrl_handler hdl; | ||
71 | enum adv7604_prim_mode prim_mode; | ||
72 | struct v4l2_dv_timings timings; | ||
73 | u8 edid[256]; | ||
74 | unsigned edid_blocks; | ||
75 | struct v4l2_fract aspect_ratio; | ||
76 | u32 rgb_quantization_range; | ||
77 | struct workqueue_struct *work_queues; | ||
78 | struct delayed_work delayed_work_enable_hotplug; | ||
79 | bool connector_hdmi; | ||
80 | |||
81 | /* i2c clients */ | ||
82 | struct i2c_client *i2c_avlink; | ||
83 | struct i2c_client *i2c_cec; | ||
84 | struct i2c_client *i2c_infoframe; | ||
85 | struct i2c_client *i2c_esdp; | ||
86 | struct i2c_client *i2c_dpp; | ||
87 | struct i2c_client *i2c_afe; | ||
88 | struct i2c_client *i2c_repeater; | ||
89 | struct i2c_client *i2c_edid; | ||
90 | struct i2c_client *i2c_hdmi; | ||
91 | struct i2c_client *i2c_test; | ||
92 | struct i2c_client *i2c_cp; | ||
93 | struct i2c_client *i2c_vdp; | ||
94 | |||
95 | /* controls */ | ||
96 | struct v4l2_ctrl *detect_tx_5v_ctrl; | ||
97 | struct v4l2_ctrl *analog_sampling_phase_ctrl; | ||
98 | struct v4l2_ctrl *free_run_color_manual_ctrl; | ||
99 | struct v4l2_ctrl *free_run_color_ctrl; | ||
100 | struct v4l2_ctrl *rgb_quantization_range_ctrl; | ||
101 | }; | ||
102 | |||
103 | /* Supported CEA and DMT timings */ | ||
104 | static const struct v4l2_dv_timings adv7604_timings[] = { | ||
105 | V4L2_DV_BT_CEA_720X480P59_94, | ||
106 | V4L2_DV_BT_CEA_720X576P50, | ||
107 | V4L2_DV_BT_CEA_1280X720P24, | ||
108 | V4L2_DV_BT_CEA_1280X720P25, | ||
109 | V4L2_DV_BT_CEA_1280X720P30, | ||
110 | V4L2_DV_BT_CEA_1280X720P50, | ||
111 | V4L2_DV_BT_CEA_1280X720P60, | ||
112 | V4L2_DV_BT_CEA_1920X1080P24, | ||
113 | V4L2_DV_BT_CEA_1920X1080P25, | ||
114 | V4L2_DV_BT_CEA_1920X1080P30, | ||
115 | V4L2_DV_BT_CEA_1920X1080P50, | ||
116 | V4L2_DV_BT_CEA_1920X1080P60, | ||
117 | |||
118 | V4L2_DV_BT_DMT_640X350P85, | ||
119 | V4L2_DV_BT_DMT_640X400P85, | ||
120 | V4L2_DV_BT_DMT_720X400P85, | ||
121 | V4L2_DV_BT_DMT_640X480P60, | ||
122 | V4L2_DV_BT_DMT_640X480P72, | ||
123 | V4L2_DV_BT_DMT_640X480P75, | ||
124 | V4L2_DV_BT_DMT_640X480P85, | ||
125 | V4L2_DV_BT_DMT_800X600P56, | ||
126 | V4L2_DV_BT_DMT_800X600P60, | ||
127 | V4L2_DV_BT_DMT_800X600P72, | ||
128 | V4L2_DV_BT_DMT_800X600P75, | ||
129 | V4L2_DV_BT_DMT_800X600P85, | ||
130 | V4L2_DV_BT_DMT_848X480P60, | ||
131 | V4L2_DV_BT_DMT_1024X768P60, | ||
132 | V4L2_DV_BT_DMT_1024X768P70, | ||
133 | V4L2_DV_BT_DMT_1024X768P75, | ||
134 | V4L2_DV_BT_DMT_1024X768P85, | ||
135 | V4L2_DV_BT_DMT_1152X864P75, | ||
136 | V4L2_DV_BT_DMT_1280X768P60_RB, | ||
137 | V4L2_DV_BT_DMT_1280X768P60, | ||
138 | V4L2_DV_BT_DMT_1280X768P75, | ||
139 | V4L2_DV_BT_DMT_1280X768P85, | ||
140 | V4L2_DV_BT_DMT_1280X800P60_RB, | ||
141 | V4L2_DV_BT_DMT_1280X800P60, | ||
142 | V4L2_DV_BT_DMT_1280X800P75, | ||
143 | V4L2_DV_BT_DMT_1280X800P85, | ||
144 | V4L2_DV_BT_DMT_1280X960P60, | ||
145 | V4L2_DV_BT_DMT_1280X960P85, | ||
146 | V4L2_DV_BT_DMT_1280X1024P60, | ||
147 | V4L2_DV_BT_DMT_1280X1024P75, | ||
148 | V4L2_DV_BT_DMT_1280X1024P85, | ||
149 | V4L2_DV_BT_DMT_1360X768P60, | ||
150 | V4L2_DV_BT_DMT_1400X1050P60_RB, | ||
151 | V4L2_DV_BT_DMT_1400X1050P60, | ||
152 | V4L2_DV_BT_DMT_1400X1050P75, | ||
153 | V4L2_DV_BT_DMT_1400X1050P85, | ||
154 | V4L2_DV_BT_DMT_1440X900P60_RB, | ||
155 | V4L2_DV_BT_DMT_1440X900P60, | ||
156 | V4L2_DV_BT_DMT_1600X1200P60, | ||
157 | V4L2_DV_BT_DMT_1680X1050P60_RB, | ||
158 | V4L2_DV_BT_DMT_1680X1050P60, | ||
159 | V4L2_DV_BT_DMT_1792X1344P60, | ||
160 | V4L2_DV_BT_DMT_1856X1392P60, | ||
161 | V4L2_DV_BT_DMT_1920X1200P60_RB, | ||
162 | V4L2_DV_BT_DMT_1366X768P60, | ||
163 | V4L2_DV_BT_DMT_1920X1080P60, | ||
164 | { }, | ||
165 | }; | ||
166 | |||
167 | /* ----------------------------------------------------------------------- */ | ||
168 | |||
169 | static inline struct adv7604_state *to_state(struct v4l2_subdev *sd) | ||
170 | { | ||
171 | return container_of(sd, struct adv7604_state, sd); | ||
172 | } | ||
173 | |||
174 | static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) | ||
175 | { | ||
176 | return &container_of(ctrl->handler, struct adv7604_state, hdl)->sd; | ||
177 | } | ||
178 | |||
179 | static inline unsigned hblanking(const struct v4l2_bt_timings *t) | ||
180 | { | ||
181 | return t->hfrontporch + t->hsync + t->hbackporch; | ||
182 | } | ||
183 | |||
184 | static inline unsigned htotal(const struct v4l2_bt_timings *t) | ||
185 | { | ||
186 | return t->width + t->hfrontporch + t->hsync + t->hbackporch; | ||
187 | } | ||
188 | |||
189 | static inline unsigned vblanking(const struct v4l2_bt_timings *t) | ||
190 | { | ||
191 | return t->vfrontporch + t->vsync + t->vbackporch; | ||
192 | } | ||
193 | |||
194 | static inline unsigned vtotal(const struct v4l2_bt_timings *t) | ||
195 | { | ||
196 | return t->height + t->vfrontporch + t->vsync + t->vbackporch; | ||
197 | } | ||
198 | |||
199 | /* ----------------------------------------------------------------------- */ | ||
200 | |||
201 | static s32 adv_smbus_read_byte_data_check(struct i2c_client *client, | ||
202 | u8 command, bool check) | ||
203 | { | ||
204 | union i2c_smbus_data data; | ||
205 | |||
206 | if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags, | ||
207 | I2C_SMBUS_READ, command, | ||
208 | I2C_SMBUS_BYTE_DATA, &data)) | ||
209 | return data.byte; | ||
210 | if (check) | ||
211 | v4l_err(client, "error reading %02x, %02x\n", | ||
212 | client->addr, command); | ||
213 | return -EIO; | ||
214 | } | ||
215 | |||
216 | static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command) | ||
217 | { | ||
218 | return adv_smbus_read_byte_data_check(client, command, true); | ||
219 | } | ||
220 | |||
221 | static s32 adv_smbus_write_byte_data(struct i2c_client *client, | ||
222 | u8 command, u8 value) | ||
223 | { | ||
224 | union i2c_smbus_data data; | ||
225 | int err; | ||
226 | int i; | ||
227 | |||
228 | data.byte = value; | ||
229 | for (i = 0; i < 3; i++) { | ||
230 | err = i2c_smbus_xfer(client->adapter, client->addr, | ||
231 | client->flags, | ||
232 | I2C_SMBUS_WRITE, command, | ||
233 | I2C_SMBUS_BYTE_DATA, &data); | ||
234 | if (!err) | ||
235 | break; | ||
236 | } | ||
237 | if (err < 0) | ||
238 | v4l_err(client, "error writing %02x, %02x, %02x\n", | ||
239 | client->addr, command, value); | ||
240 | return err; | ||
241 | } | ||
242 | |||
243 | static s32 adv_smbus_write_i2c_block_data(struct i2c_client *client, | ||
244 | u8 command, unsigned length, const u8 *values) | ||
245 | { | ||
246 | union i2c_smbus_data data; | ||
247 | |||
248 | if (length > I2C_SMBUS_BLOCK_MAX) | ||
249 | length = I2C_SMBUS_BLOCK_MAX; | ||
250 | data.block[0] = length; | ||
251 | memcpy(data.block + 1, values, length); | ||
252 | return i2c_smbus_xfer(client->adapter, client->addr, client->flags, | ||
253 | I2C_SMBUS_WRITE, command, | ||
254 | I2C_SMBUS_I2C_BLOCK_DATA, &data); | ||
255 | } | ||
256 | |||
257 | /* ----------------------------------------------------------------------- */ | ||
258 | |||
259 | static inline int io_read(struct v4l2_subdev *sd, u8 reg) | ||
260 | { | ||
261 | struct i2c_client *client = v4l2_get_subdevdata(sd); | ||
262 | |||
263 | return adv_smbus_read_byte_data(client, reg); | ||
264 | } | ||
265 | |||
266 | static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
267 | { | ||
268 | struct i2c_client *client = v4l2_get_subdevdata(sd); | ||
269 | |||
270 | return adv_smbus_write_byte_data(client, reg, val); | ||
271 | } | ||
272 | |||
273 | static inline int io_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) | ||
274 | { | ||
275 | return io_write(sd, reg, (io_read(sd, reg) & mask) | val); | ||
276 | } | ||
277 | |||
278 | static inline int avlink_read(struct v4l2_subdev *sd, u8 reg) | ||
279 | { | ||
280 | struct adv7604_state *state = to_state(sd); | ||
281 | |||
282 | return adv_smbus_read_byte_data(state->i2c_avlink, reg); | ||
283 | } | ||
284 | |||
285 | static inline int avlink_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
286 | { | ||
287 | struct adv7604_state *state = to_state(sd); | ||
288 | |||
289 | return adv_smbus_write_byte_data(state->i2c_avlink, reg, val); | ||
290 | } | ||
291 | |||
292 | static inline int cec_read(struct v4l2_subdev *sd, u8 reg) | ||
293 | { | ||
294 | struct adv7604_state *state = to_state(sd); | ||
295 | |||
296 | return adv_smbus_read_byte_data(state->i2c_cec, reg); | ||
297 | } | ||
298 | |||
299 | static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
300 | { | ||
301 | struct adv7604_state *state = to_state(sd); | ||
302 | |||
303 | return adv_smbus_write_byte_data(state->i2c_cec, reg, val); | ||
304 | } | ||
305 | |||
306 | static inline int cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) | ||
307 | { | ||
308 | return cec_write(sd, reg, (cec_read(sd, reg) & mask) | val); | ||
309 | } | ||
310 | |||
311 | static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg) | ||
312 | { | ||
313 | struct adv7604_state *state = to_state(sd); | ||
314 | |||
315 | return adv_smbus_read_byte_data(state->i2c_infoframe, reg); | ||
316 | } | ||
317 | |||
318 | static inline int infoframe_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
319 | { | ||
320 | struct adv7604_state *state = to_state(sd); | ||
321 | |||
322 | return adv_smbus_write_byte_data(state->i2c_infoframe, reg, val); | ||
323 | } | ||
324 | |||
325 | static inline int esdp_read(struct v4l2_subdev *sd, u8 reg) | ||
326 | { | ||
327 | struct adv7604_state *state = to_state(sd); | ||
328 | |||
329 | return adv_smbus_read_byte_data(state->i2c_esdp, reg); | ||
330 | } | ||
331 | |||
332 | static inline int esdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
333 | { | ||
334 | struct adv7604_state *state = to_state(sd); | ||
335 | |||
336 | return adv_smbus_write_byte_data(state->i2c_esdp, reg, val); | ||
337 | } | ||
338 | |||
339 | static inline int dpp_read(struct v4l2_subdev *sd, u8 reg) | ||
340 | { | ||
341 | struct adv7604_state *state = to_state(sd); | ||
342 | |||
343 | return adv_smbus_read_byte_data(state->i2c_dpp, reg); | ||
344 | } | ||
345 | |||
346 | static inline int dpp_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
347 | { | ||
348 | struct adv7604_state *state = to_state(sd); | ||
349 | |||
350 | return adv_smbus_write_byte_data(state->i2c_dpp, reg, val); | ||
351 | } | ||
352 | |||
353 | static inline int afe_read(struct v4l2_subdev *sd, u8 reg) | ||
354 | { | ||
355 | struct adv7604_state *state = to_state(sd); | ||
356 | |||
357 | return adv_smbus_read_byte_data(state->i2c_afe, reg); | ||
358 | } | ||
359 | |||
360 | static inline int afe_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
361 | { | ||
362 | struct adv7604_state *state = to_state(sd); | ||
363 | |||
364 | return adv_smbus_write_byte_data(state->i2c_afe, reg, val); | ||
365 | } | ||
366 | |||
367 | static inline int rep_read(struct v4l2_subdev *sd, u8 reg) | ||
368 | { | ||
369 | struct adv7604_state *state = to_state(sd); | ||
370 | |||
371 | return adv_smbus_read_byte_data(state->i2c_repeater, reg); | ||
372 | } | ||
373 | |||
374 | static inline int rep_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
375 | { | ||
376 | struct adv7604_state *state = to_state(sd); | ||
377 | |||
378 | return adv_smbus_write_byte_data(state->i2c_repeater, reg, val); | ||
379 | } | ||
380 | |||
381 | static inline int rep_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) | ||
382 | { | ||
383 | return rep_write(sd, reg, (rep_read(sd, reg) & mask) | val); | ||
384 | } | ||
385 | |||
386 | static inline int edid_read(struct v4l2_subdev *sd, u8 reg) | ||
387 | { | ||
388 | struct adv7604_state *state = to_state(sd); | ||
389 | |||
390 | return adv_smbus_read_byte_data(state->i2c_edid, reg); | ||
391 | } | ||
392 | |||
393 | static inline int edid_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
394 | { | ||
395 | struct adv7604_state *state = to_state(sd); | ||
396 | |||
397 | return adv_smbus_write_byte_data(state->i2c_edid, reg, val); | ||
398 | } | ||
399 | |||
400 | static inline int edid_read_block(struct v4l2_subdev *sd, unsigned len, u8 *val) | ||
401 | { | ||
402 | struct adv7604_state *state = to_state(sd); | ||
403 | struct i2c_client *client = state->i2c_edid; | ||
404 | u8 msgbuf0[1] = { 0 }; | ||
405 | u8 msgbuf1[256]; | ||
406 | struct i2c_msg msg[2] = { { client->addr, 0, 1, msgbuf0 }, | ||
407 | { client->addr, 0 | I2C_M_RD, len, msgbuf1 } | ||
408 | }; | ||
409 | |||
410 | if (i2c_transfer(client->adapter, msg, 2) < 0) | ||
411 | return -EIO; | ||
412 | memcpy(val, msgbuf1, len); | ||
413 | return 0; | ||
414 | } | ||
415 | |||
416 | static void adv7604_delayed_work_enable_hotplug(struct work_struct *work) | ||
417 | { | ||
418 | struct delayed_work *dwork = to_delayed_work(work); | ||
419 | struct adv7604_state *state = container_of(dwork, struct adv7604_state, | ||
420 | delayed_work_enable_hotplug); | ||
421 | struct v4l2_subdev *sd = &state->sd; | ||
422 | |||
423 | v4l2_dbg(2, debug, sd, "%s: enable hotplug\n", __func__); | ||
424 | |||
425 | v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)1); | ||
426 | } | ||
427 | |||
428 | static inline int edid_write_block(struct v4l2_subdev *sd, | ||
429 | unsigned len, const u8 *val) | ||
430 | { | ||
431 | struct i2c_client *client = v4l2_get_subdevdata(sd); | ||
432 | struct adv7604_state *state = to_state(sd); | ||
433 | int err = 0; | ||
434 | int i; | ||
435 | |||
436 | v4l2_dbg(2, debug, sd, "%s: write EDID block (%d byte)\n", __func__, len); | ||
437 | |||
438 | v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); | ||
439 | |||
440 | /* Disables I2C access to internal EDID ram from DDC port */ | ||
441 | rep_write_and_or(sd, 0x77, 0xf0, 0x0); | ||
442 | |||
443 | for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX) | ||
444 | err = adv_smbus_write_i2c_block_data(state->i2c_edid, i, | ||
445 | I2C_SMBUS_BLOCK_MAX, val + i); | ||
446 | if (err) | ||
447 | return err; | ||
448 | |||
449 | /* adv7604 calculates the checksums and enables I2C access to internal | ||
450 | EDID ram from DDC port. */ | ||
451 | rep_write_and_or(sd, 0x77, 0xf0, 0x1); | ||
452 | |||
453 | for (i = 0; i < 1000; i++) { | ||
454 | if (rep_read(sd, 0x7d) & 1) | ||
455 | break; | ||
456 | mdelay(1); | ||
457 | } | ||
458 | if (i == 1000) { | ||
459 | v4l_err(client, "error enabling edid\n"); | ||
460 | return -EIO; | ||
461 | } | ||
462 | |||
463 | /* enable hotplug after 100 ms */ | ||
464 | queue_delayed_work(state->work_queues, | ||
465 | &state->delayed_work_enable_hotplug, HZ / 10); | ||
466 | return 0; | ||
467 | } | ||
468 | |||
469 | static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg) | ||
470 | { | ||
471 | struct adv7604_state *state = to_state(sd); | ||
472 | |||
473 | return adv_smbus_read_byte_data(state->i2c_hdmi, reg); | ||
474 | } | ||
475 | |||
476 | static inline int hdmi_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
477 | { | ||
478 | struct adv7604_state *state = to_state(sd); | ||
479 | |||
480 | return adv_smbus_write_byte_data(state->i2c_hdmi, reg, val); | ||
481 | } | ||
482 | |||
483 | static inline int test_read(struct v4l2_subdev *sd, u8 reg) | ||
484 | { | ||
485 | struct adv7604_state *state = to_state(sd); | ||
486 | |||
487 | return adv_smbus_read_byte_data(state->i2c_test, reg); | ||
488 | } | ||
489 | |||
490 | static inline int test_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
491 | { | ||
492 | struct adv7604_state *state = to_state(sd); | ||
493 | |||
494 | return adv_smbus_write_byte_data(state->i2c_test, reg, val); | ||
495 | } | ||
496 | |||
497 | static inline int cp_read(struct v4l2_subdev *sd, u8 reg) | ||
498 | { | ||
499 | struct adv7604_state *state = to_state(sd); | ||
500 | |||
501 | return adv_smbus_read_byte_data(state->i2c_cp, reg); | ||
502 | } | ||
503 | |||
504 | static inline int cp_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
505 | { | ||
506 | struct adv7604_state *state = to_state(sd); | ||
507 | |||
508 | return adv_smbus_write_byte_data(state->i2c_cp, reg, val); | ||
509 | } | ||
510 | |||
511 | static inline int cp_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val) | ||
512 | { | ||
513 | return cp_write(sd, reg, (cp_read(sd, reg) & mask) | val); | ||
514 | } | ||
515 | |||
516 | static inline int vdp_read(struct v4l2_subdev *sd, u8 reg) | ||
517 | { | ||
518 | struct adv7604_state *state = to_state(sd); | ||
519 | |||
520 | return adv_smbus_read_byte_data(state->i2c_vdp, reg); | ||
521 | } | ||
522 | |||
523 | static inline int vdp_write(struct v4l2_subdev *sd, u8 reg, u8 val) | ||
524 | { | ||
525 | struct adv7604_state *state = to_state(sd); | ||
526 | |||
527 | return adv_smbus_write_byte_data(state->i2c_vdp, reg, val); | ||
528 | } | ||
529 | |||
530 | /* ----------------------------------------------------------------------- */ | ||
531 | |||
532 | #ifdef CONFIG_VIDEO_ADV_DEBUG | ||
533 | static void adv7604_inv_register(struct v4l2_subdev *sd) | ||
534 | { | ||
535 | v4l2_info(sd, "0x000-0x0ff: IO Map\n"); | ||
536 | v4l2_info(sd, "0x100-0x1ff: AVLink Map\n"); | ||
537 | v4l2_info(sd, "0x200-0x2ff: CEC Map\n"); | ||
538 | v4l2_info(sd, "0x300-0x3ff: InfoFrame Map\n"); | ||
539 | v4l2_info(sd, "0x400-0x4ff: ESDP Map\n"); | ||
540 | v4l2_info(sd, "0x500-0x5ff: DPP Map\n"); | ||
541 | v4l2_info(sd, "0x600-0x6ff: AFE Map\n"); | ||
542 | v4l2_info(sd, "0x700-0x7ff: Repeater Map\n"); | ||
543 | v4l2_info(sd, "0x800-0x8ff: EDID Map\n"); | ||
544 | v4l2_info(sd, "0x900-0x9ff: HDMI Map\n"); | ||
545 | v4l2_info(sd, "0xa00-0xaff: Test Map\n"); | ||
546 | v4l2_info(sd, "0xb00-0xbff: CP Map\n"); | ||
547 | v4l2_info(sd, "0xc00-0xcff: VDP Map\n"); | ||
548 | } | ||
549 | |||
550 | static int adv7604_g_register(struct v4l2_subdev *sd, | ||
551 | struct v4l2_dbg_register *reg) | ||
552 | { | ||
553 | struct i2c_client *client = v4l2_get_subdevdata(sd); | ||
554 | |||
555 | if (!v4l2_chip_match_i2c_client(client, ®->match)) | ||
556 | return -EINVAL; | ||
557 | if (!capable(CAP_SYS_ADMIN)) | ||
558 | return -EPERM; | ||
559 | reg->size = 1; | ||
560 | switch (reg->reg >> 8) { | ||
561 | case 0: | ||
562 | reg->val = io_read(sd, reg->reg & 0xff); | ||
563 | break; | ||
564 | case 1: | ||
565 | reg->val = avlink_read(sd, reg->reg & 0xff); | ||
566 | break; | ||
567 | case 2: | ||
568 | reg->val = cec_read(sd, reg->reg & 0xff); | ||
569 | break; | ||
570 | case 3: | ||
571 | reg->val = infoframe_read(sd, reg->reg & 0xff); | ||
572 | break; | ||
573 | case 4: | ||
574 | reg->val = esdp_read(sd, reg->reg & 0xff); | ||
575 | break; | ||
576 | case 5: | ||
577 | reg->val = dpp_read(sd, reg->reg & 0xff); | ||
578 | break; | ||
579 | case 6: | ||
580 | reg->val = afe_read(sd, reg->reg & 0xff); | ||
581 | break; | ||
582 | case 7: | ||
583 | reg->val = rep_read(sd, reg->reg & 0xff); | ||
584 | break; | ||
585 | case 8: | ||
586 | reg->val = edid_read(sd, reg->reg & 0xff); | ||
587 | break; | ||
588 | case 9: | ||
589 | reg->val = hdmi_read(sd, reg->reg & 0xff); | ||
590 | break; | ||
591 | case 0xa: | ||
592 | reg->val = test_read(sd, reg->reg & 0xff); | ||
593 | break; | ||
594 | case 0xb: | ||
595 | reg->val = cp_read(sd, reg->reg & 0xff); | ||
596 | break; | ||
597 | case 0xc: | ||
598 | reg->val = vdp_read(sd, reg->reg & 0xff); | ||
599 | break; | ||
600 | default: | ||
601 | v4l2_info(sd, "Register %03llx not supported\n", reg->reg); | ||
602 | adv7604_inv_register(sd); | ||
603 | break; | ||
604 | } | ||
605 | return 0; | ||
606 | } | ||
607 | |||
608 | static int adv7604_s_register(struct v4l2_subdev *sd, | ||
609 | struct v4l2_dbg_register *reg) | ||
610 | { | ||
611 | struct i2c_client *client = v4l2_get_subdevdata(sd); | ||
612 | |||
613 | if (!v4l2_chip_match_i2c_client(client, ®->match)) | ||
614 | return -EINVAL; | ||
615 | if (!capable(CAP_SYS_ADMIN)) | ||
616 | return -EPERM; | ||
617 | switch (reg->reg >> 8) { | ||
618 | case 0: | ||
619 | io_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
620 | break; | ||
621 | case 1: | ||
622 | avlink_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
623 | break; | ||
624 | case 2: | ||
625 | cec_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
626 | break; | ||
627 | case 3: | ||
628 | infoframe_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
629 | break; | ||
630 | case 4: | ||
631 | esdp_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
632 | break; | ||
633 | case 5: | ||
634 | dpp_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
635 | break; | ||
636 | case 6: | ||
637 | afe_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
638 | break; | ||
639 | case 7: | ||
640 | rep_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
641 | break; | ||
642 | case 8: | ||
643 | edid_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
644 | break; | ||
645 | case 9: | ||
646 | hdmi_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
647 | break; | ||
648 | case 0xa: | ||
649 | test_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
650 | break; | ||
651 | case 0xb: | ||
652 | cp_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
653 | break; | ||
654 | case 0xc: | ||
655 | vdp_write(sd, reg->reg & 0xff, reg->val & 0xff); | ||
656 | break; | ||
657 | default: | ||
658 | v4l2_info(sd, "Register %03llx not supported\n", reg->reg); | ||
659 | adv7604_inv_register(sd); | ||
660 | break; | ||
661 | } | ||
662 | return 0; | ||
663 | } | ||
664 | #endif | ||
665 | |||
666 | static int adv7604_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd) | ||
667 | { | ||
668 | struct adv7604_state *state = to_state(sd); | ||
669 | |||
670 | /* port A only */ | ||
671 | return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, | ||
672 | ((io_read(sd, 0x6f) & 0x10) >> 4)); | ||
673 | } | ||
674 | |||
675 | static void configure_free_run(struct v4l2_subdev *sd, const struct v4l2_bt_timings *timings) | ||
676 | { | ||
677 | struct i2c_client *client = v4l2_get_subdevdata(sd); | ||
678 | u32 width = htotal(timings); | ||
679 | u32 height = vtotal(timings); | ||
680 | u16 ch1_fr_ll = (((u32)timings->pixelclock / 100) > 0) ? | ||
681 | ((width * (ADV7604_fsc / 100)) / ((u32)timings->pixelclock / 100)) : 0; | ||
682 | |||
683 | v4l2_dbg(2, debug, sd, "%s\n", __func__); | ||
684 | |||
685 | cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7); /* CH1_FR_LL */ | ||
686 | cp_write(sd, 0x90, ch1_fr_ll & 0xff); /* CH1_FR_LL */ | ||
687 | cp_write(sd, 0xab, (height >> 4) & 0xff); /* CP_LCOUNT_MAX */ | ||
688 | cp_write(sd, 0xac, (height & 0x0f) << 4); /* CP_LCOUNT_MAX */ | ||
689 | /* TODO support interlaced */ | ||
690 | cp_write(sd, 0x91, 0x10); /* INTERLACED */ | ||
691 | |||
692 | /* Should only be set in auto-graphics mode [REF_02 p. 91-92] */ | ||
693 | if ((io_read(sd, 0x00) == 0x07) && (io_read(sd, 0x01) == 0x02)) { | ||
694 | u16 cp_start_sav, cp_start_eav, cp_start_vbi, cp_end_vbi; | ||
695 | const u8 pll[2] = { | ||
696 | (0xc0 | ((width >> 8) & 0x1f)), | ||
697 | (width & 0xff) | ||
698 | }; | ||
699 | |||
700 | /* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */ | ||
701 | /* IO-map reg. 0x16 and 0x17 should be written in sequence */ | ||
702 | if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) { | ||
703 | v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n"); | ||
704 | return; | ||
705 | } | ||
706 | |||
707 | /* active video - horizontal timing */ | ||
708 | cp_start_sav = timings->hsync + timings->hbackporch - 4; | ||
709 | cp_start_eav = width - timings->hfrontporch; | ||
710 | cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff); | ||
711 | cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | ((cp_start_eav >> 8) & 0x0f)); | ||
712 | cp_write(sd, 0xa4, cp_start_eav & 0xff); | ||
713 | |||
714 | /* active video - vertical timing */ | ||
715 | cp_start_vbi = height - timings->vfrontporch; | ||
716 | cp_end_vbi = timings->vsync + timings->vbackporch; | ||
717 | cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff); | ||
718 | cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | ((cp_end_vbi >> 8) & 0xf)); | ||
719 | cp_write(sd, 0xa7, cp_end_vbi & 0xff); | ||
720 | } else { | ||
721 | /* reset to default values */ | ||
722 | io_write(sd, 0x16, 0x43); | ||
723 | io_write(sd, 0x17, 0x5a); | ||
724 | cp_write(sd, 0xa2, 0x00); | ||
725 | cp_write(sd, 0xa3, 0x00); | ||
726 | cp_write(sd, 0xa4, 0x00); | ||
727 | cp_write(sd, 0xa5, 0x00); | ||
728 | cp_write(sd, 0xa6, 0x00); | ||
729 | cp_write(sd, 0xa7, 0x00); | ||
730 | } | ||
731 | } | ||
732 | |||
733 | |||
734 | static void set_rgb_quantization_range(struct v4l2_subdev *sd) | ||
735 | { | ||
736 | struct adv7604_state *state = to_state(sd); | ||
737 | |||
738 | switch (state->rgb_quantization_range) { | ||
739 | case V4L2_DV_RGB_RANGE_AUTO: | ||
740 | /* automatic */ | ||
741 | if ((hdmi_read(sd, 0x05) & 0x80) || | ||
742 | (state->prim_mode == ADV7604_PRIM_MODE_COMP) || | ||
743 | (state->prim_mode == ADV7604_PRIM_MODE_RGB)) { | ||
744 | /* receiving HDMI or analog signal */ | ||
745 | io_write_and_or(sd, 0x02, 0x0f, 0xf0); | ||
746 | } else { | ||
747 | /* receiving DVI-D signal */ | ||
748 | |||
749 | /* ADV7604 selects RGB limited range regardless of | ||
750 | input format (CE/IT) in automatic mode */ | ||
751 | if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { | ||
752 | /* RGB limited range (16-235) */ | ||
753 | io_write_and_or(sd, 0x02, 0x0f, 0x00); | ||
754 | |||
755 | } else { | ||
756 | /* RGB full range (0-255) */ | ||
757 | io_write_and_or(sd, 0x02, 0x0f, 0x10); | ||
758 | } | ||
759 | } | ||
760 | break; | ||
761 | case V4L2_DV_RGB_RANGE_LIMITED: | ||
762 | /* RGB limited range (16-235) */ | ||
763 | io_write_and_or(sd, 0x02, 0x0f, 0x00); | ||
764 | break; | ||
765 | case V4L2_DV_RGB_RANGE_FULL: | ||
766 | /* RGB full range (0-255) */ | ||
767 | io_write_and_or(sd, 0x02, 0x0f, 0x10); | ||
768 | break; | ||
769 | } | ||
770 | } | ||
771 | |||
772 | |||
773 | static int adv7604_s_ctrl(struct v4l2_ctrl *ctrl) | ||
774 | { | ||
775 | struct v4l2_subdev *sd = to_sd(ctrl); | ||
776 | struct adv7604_state *state = to_state(sd); | ||
777 | |||
778 | switch (ctrl->id) { | ||
779 | case V4L2_CID_BRIGHTNESS: | ||
780 | cp_write(sd, 0x3c, ctrl->val); | ||
781 | return 0; | ||
782 | case V4L2_CID_CONTRAST: | ||
783 | cp_write(sd, 0x3a, ctrl->val); | ||
784 | return 0; | ||
785 | case V4L2_CID_SATURATION: | ||
786 | cp_write(sd, 0x3b, ctrl->val); | ||
787 | return 0; | ||
788 | case V4L2_CID_HUE: | ||
789 | cp_write(sd, 0x3d, ctrl->val); | ||
790 | return 0; | ||
791 | case V4L2_CID_DV_RX_RGB_RANGE: | ||
792 | state->rgb_quantization_range = ctrl->val; | ||
793 | set_rgb_quantization_range(sd); | ||
794 | return 0; | ||
795 | case V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE: | ||
796 | /* Set the analog sampling phase. This is needed to find the | ||
797 | best sampling phase for analog video: an application or | ||
798 | driver has to try a number of phases and analyze the picture | ||
799 | quality before settling on the best performing phase. */ | ||
800 | afe_write(sd, 0xc8, ctrl->val); | ||
801 | return 0; | ||
802 | case V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL: | ||
803 | /* Use the default blue color for free running mode, | ||
804 | or supply your own. */ | ||
805 | cp_write_and_or(sd, 0xbf, ~0x04, (ctrl->val << 2)); | ||
806 | return 0; | ||
807 | case V4L2_CID_ADV_RX_FREE_RUN_COLOR: | ||
808 | cp_write(sd, 0xc0, (ctrl->val & 0xff0000) >> 16); | ||
809 | cp_write(sd, 0xc1, (ctrl->val & 0x00ff00) >> 8); | ||
810 | cp_write(sd, 0xc2, (u8)(ctrl->val & 0x0000ff)); | ||
811 | return 0; | ||
812 | } | ||
813 | return -EINVAL; | ||
814 | } | ||
815 | |||
816 | static int adv7604_g_chip_ident(struct v4l2_subdev *sd, | ||
817 | struct v4l2_dbg_chip_ident *chip) | ||
818 | { | ||
819 | struct i2c_client *client = v4l2_get_subdevdata(sd); | ||
820 | |||
821 | return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7604, 0); | ||
822 | } | ||
823 | |||
824 | /* ----------------------------------------------------------------------- */ | ||
825 | |||
826 | static inline bool no_power(struct v4l2_subdev *sd) | ||
827 | { | ||
828 | /* Entire chip or CP powered off */ | ||
829 | return io_read(sd, 0x0c) & 0x24; | ||
830 | } | ||
831 | |||
832 | static inline bool no_signal_tmds(struct v4l2_subdev *sd) | ||
833 | { | ||
834 | /* TODO port B, C and D */ | ||
835 | return !(io_read(sd, 0x6a) & 0x10); | ||
836 | } | ||
837 | |||
838 | static inline bool no_lock_tmds(struct v4l2_subdev *sd) | ||
839 | { | ||
840 | return (io_read(sd, 0x6a) & 0xe0) != 0xe0; | ||
841 | } | ||
842 | |||
843 | static inline bool no_lock_sspd(struct v4l2_subdev *sd) | ||
844 | { | ||
845 | /* TODO channel 2 */ | ||
846 | return ((cp_read(sd, 0xb5) & 0xd0) != 0xd0); | ||
847 | } | ||
848 | |||
849 | static inline bool no_lock_stdi(struct v4l2_subdev *sd) | ||
850 | { | ||
851 | /* TODO channel 2 */ | ||
852 | return !(cp_read(sd, 0xb1) & 0x80); | ||
853 | } | ||
854 | |||
855 | static inline bool no_signal(struct v4l2_subdev *sd) | ||
856 | { | ||
857 | struct adv7604_state *state = to_state(sd); | ||
858 | bool ret; | ||
859 | |||
860 | ret = no_power(sd); | ||
861 | |||
862 | ret |= no_lock_stdi(sd); | ||
863 | ret |= no_lock_sspd(sd); | ||
864 | |||
865 | if (DIGITAL_INPUT) { | ||
866 | ret |= no_lock_tmds(sd); | ||
867 | ret |= no_signal_tmds(sd); | ||
868 | } | ||
869 | |||
870 | return ret; | ||
871 | } | ||
872 | |||
873 | static inline bool no_lock_cp(struct v4l2_subdev *sd) | ||
874 | { | ||
875 | /* CP has detected a non standard number of lines on the incoming | ||
876 | video compared to what it is configured to receive by s_dv_timings */ | ||
877 | return io_read(sd, 0x12) & 0x01; | ||
878 | } | ||
879 | |||
880 | static int adv7604_g_input_status(struct v4l2_subdev *sd, u32 *status) | ||
881 | { | ||
882 | struct adv7604_state *state = to_state(sd); | ||
883 | |||
884 | *status = 0; | ||
885 | *status |= no_power(sd) ? V4L2_IN_ST_NO_POWER : 0; | ||
886 | *status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0; | ||
887 | if (no_lock_cp(sd)) | ||
888 | *status |= DIGITAL_INPUT ? V4L2_IN_ST_NO_SYNC : V4L2_IN_ST_NO_H_LOCK; | ||
889 | |||
890 | v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status); | ||
891 | |||
892 | return 0; | ||
893 | } | ||
894 | |||
895 | /* ----------------------------------------------------------------------- */ | ||
896 | |||
897 | static void adv7604_print_timings(struct v4l2_subdev *sd, | ||
898 | struct v4l2_dv_timings *timings, const char *txt, bool detailed) | ||
899 | { | ||
900 | struct v4l2_bt_timings *bt = &timings->bt; | ||
901 | u32 htot, vtot; | ||
902 | |||
903 | if (timings->type != V4L2_DV_BT_656_1120) | ||
904 | return; | ||
905 | |||
906 | htot = htotal(bt); | ||
907 | vtot = vtotal(bt); | ||
908 | |||
909 | v4l2_info(sd, "%s %dx%d%s%d (%dx%d)", | ||
910 | txt, bt->width, bt->height, bt->interlaced ? "i" : "p", | ||
911 | (htot * vtot) > 0 ? ((u32)bt->pixelclock / | ||
912 | (htot * vtot)) : 0, | ||
913 | htot, vtot); | ||
914 | |||
915 | if (detailed) { | ||
916 | v4l2_info(sd, " horizontal: fp = %d, %ssync = %d, bp = %d\n", | ||
917 | bt->hfrontporch, | ||
918 | (bt->polarities & V4L2_DV_HSYNC_POS_POL) ? "+" : "-", | ||
919 | bt->hsync, bt->hbackporch); | ||
920 | v4l2_info(sd, " vertical: fp = %d, %ssync = %d, bp = %d\n", | ||
921 | bt->vfrontporch, | ||
922 | (bt->polarities & V4L2_DV_VSYNC_POS_POL) ? "+" : "-", | ||
923 | bt->vsync, bt->vbackporch); | ||
924 | v4l2_info(sd, " pixelclock: %lld, flags: 0x%x, standards: 0x%x\n", | ||
925 | bt->pixelclock, bt->flags, bt->standards); | ||
926 | } | ||
927 | } | ||
928 | |||
929 | struct stdi_readback { | ||
930 | u16 bl, lcf, lcvs; | ||
931 | u8 hs_pol, vs_pol; | ||
932 | bool interlaced; | ||
933 | }; | ||
934 | |||
935 | static int stdi2dv_timings(struct v4l2_subdev *sd, | ||
936 | struct stdi_readback *stdi, | ||
937 | struct v4l2_dv_timings *timings) | ||
938 | { | ||
939 | struct adv7604_state *state = to_state(sd); | ||
940 | u32 hfreq = (ADV7604_fsc * 8) / stdi->bl; | ||
941 | u32 pix_clk; | ||
942 | int i; | ||
943 | |||
944 | for (i = 0; adv7604_timings[i].bt.height; i++) { | ||
945 | if (vtotal(&adv7604_timings[i].bt) != stdi->lcf + 1) | ||
946 | continue; | ||
947 | if (adv7604_timings[i].bt.vsync != stdi->lcvs) | ||
948 | continue; | ||
949 | |||
950 | pix_clk = hfreq * htotal(&adv7604_timings[i].bt); | ||
951 | |||
952 | if ((pix_clk < adv7604_timings[i].bt.pixelclock + 1000000) && | ||
953 | (pix_clk > adv7604_timings[i].bt.pixelclock - 1000000)) { | ||
954 | *timings = adv7604_timings[i]; | ||
955 | return 0; | ||
956 | } | ||
957 | } | ||
958 | |||
959 | if (v4l2_detect_cvt(stdi->lcf + 1, hfreq, stdi->lcvs, | ||
960 | (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | | ||
961 | (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), | ||
962 | timings)) | ||
963 | return 0; | ||
964 | if (v4l2_detect_gtf(stdi->lcf + 1, hfreq, stdi->lcvs, | ||
965 | (stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) | | ||
966 | (stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0), | ||
967 | state->aspect_ratio, timings)) | ||
968 | return 0; | ||
969 | |||
970 | v4l2_dbg(2, debug, sd, "%s: No format candidate found for lcf=%d, bl = %d\n", | ||
971 | __func__, stdi->lcf, stdi->bl); | ||
972 | return -1; | ||
973 | } | ||
974 | |||
975 | static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi) | ||
976 | { | ||
977 | if (no_lock_stdi(sd) || no_lock_sspd(sd)) { | ||
978 | v4l2_dbg(2, debug, sd, "%s: STDI and/or SSPD not locked\n", __func__); | ||
979 | return -1; | ||
980 | } | ||
981 | |||
982 | /* read STDI */ | ||
983 | stdi->bl = ((cp_read(sd, 0xb1) & 0x3f) << 8) | cp_read(sd, 0xb2); | ||
984 | stdi->lcf = ((cp_read(sd, 0xb3) & 0x7) << 8) | cp_read(sd, 0xb4); | ||
985 | stdi->lcvs = cp_read(sd, 0xb3) >> 3; | ||
986 | stdi->interlaced = io_read(sd, 0x12) & 0x10; | ||
987 | |||
988 | /* read SSPD */ | ||
989 | if ((cp_read(sd, 0xb5) & 0x03) == 0x01) { | ||
990 | stdi->hs_pol = ((cp_read(sd, 0xb5) & 0x10) ? | ||
991 | ((cp_read(sd, 0xb5) & 0x08) ? '+' : '-') : 'x'); | ||
992 | stdi->vs_pol = ((cp_read(sd, 0xb5) & 0x40) ? | ||
993 | ((cp_read(sd, 0xb5) & 0x20) ? '+' : '-') : 'x'); | ||
994 | } else { | ||
995 | stdi->hs_pol = 'x'; | ||
996 | stdi->vs_pol = 'x'; | ||
997 | } | ||
998 | |||
999 | if (no_lock_stdi(sd) || no_lock_sspd(sd)) { | ||
1000 | v4l2_dbg(2, debug, sd, | ||
1001 | "%s: signal lost during readout of STDI/SSPD\n", __func__); | ||
1002 | return -1; | ||
1003 | } | ||
1004 | |||
1005 | if (stdi->lcf < 239 || stdi->bl < 8 || stdi->bl == 0x3fff) { | ||
1006 | v4l2_dbg(2, debug, sd, "%s: invalid signal\n", __func__); | ||
1007 | memset(stdi, 0, sizeof(struct stdi_readback)); | ||
1008 | return -1; | ||
1009 | } | ||
1010 | |||
1011 | v4l2_dbg(2, debug, sd, | ||
1012 | "%s: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %chsync, %cvsync, %s\n", | ||
1013 | __func__, stdi->lcf, stdi->bl, stdi->lcvs, | ||
1014 | stdi->hs_pol, stdi->vs_pol, | ||
1015 | stdi->interlaced ? "interlaced" : "progressive"); | ||
1016 | |||
1017 | return 0; | ||
1018 | } | ||
1019 | |||
1020 | static int adv7604_enum_dv_timings(struct v4l2_subdev *sd, | ||
1021 | struct v4l2_enum_dv_timings *timings) | ||
1022 | { | ||
1023 | if (timings->index >= ARRAY_SIZE(adv7604_timings) - 1) | ||
1024 | return -EINVAL; | ||
1025 | memset(timings->reserved, 0, sizeof(timings->reserved)); | ||
1026 | timings->timings = adv7604_timings[timings->index]; | ||
1027 | return 0; | ||
1028 | } | ||
1029 | |||
1030 | static int adv7604_dv_timings_cap(struct v4l2_subdev *sd, | ||
1031 | struct v4l2_dv_timings_cap *cap) | ||
1032 | { | ||
1033 | struct adv7604_state *state = to_state(sd); | ||
1034 | |||
1035 | cap->type = V4L2_DV_BT_656_1120; | ||
1036 | cap->bt.max_width = 1920; | ||
1037 | cap->bt.max_height = 1200; | ||
1038 | cap->bt.min_pixelclock = 27000000; | ||
1039 | if (DIGITAL_INPUT) | ||
1040 | cap->bt.max_pixelclock = 225000000; | ||
1041 | else | ||
1042 | cap->bt.max_pixelclock = 170000000; | ||
1043 | cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | | ||
1044 | V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT; | ||
1045 | cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE | | ||
1046 | V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM; | ||
1047 | return 0; | ||
1048 | } | ||
1049 | |||
1050 | /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings | ||
1051 | if the format is listed in adv7604_timings[] */ | ||
1052 | static void adv7604_fill_optional_dv_timings_fields(struct v4l2_subdev *sd, | ||
1053 | struct v4l2_dv_timings *timings) | ||
1054 | { | ||
1055 | struct adv7604_state *state = to_state(sd); | ||
1056 | int i; | ||
1057 | |||
1058 | for (i = 0; adv7604_timings[i].bt.width; i++) { | ||
1059 | if (v4l_match_dv_timings(timings, &adv7604_timings[i], | ||
1060 | DIGITAL_INPUT ? 250000 : 1000000)) { | ||
1061 | *timings = adv7604_timings[i]; | ||
1062 | break; | ||
1063 | } | ||
1064 | } | ||
1065 | } | ||
1066 | |||
1067 | static int adv7604_query_dv_timings(struct v4l2_subdev *sd, | ||
1068 | struct v4l2_dv_timings *timings) | ||
1069 | { | ||
1070 | struct adv7604_state *state = to_state(sd); | ||
1071 | struct v4l2_bt_timings *bt = &timings->bt; | ||
1072 | struct stdi_readback stdi; | ||
1073 | |||
1074 | if (!timings) | ||
1075 | return -EINVAL; | ||
1076 | |||
1077 | memset(timings, 0, sizeof(struct v4l2_dv_timings)); | ||
1078 | |||
1079 | if (no_signal(sd)) { | ||
1080 | v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__); | ||
1081 | return -ENOLINK; | ||
1082 | } | ||
1083 | |||
1084 | /* read STDI */ | ||
1085 | if (read_stdi(sd, &stdi)) { | ||
1086 | v4l2_dbg(1, debug, sd, "%s: STDI/SSPD not locked\n", __func__); | ||
1087 | return -ENOLINK; | ||
1088 | } | ||
1089 | bt->interlaced = stdi.interlaced ? | ||
1090 | V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE; | ||
1091 | |||
1092 | if (DIGITAL_INPUT) { | ||
1093 | timings->type = V4L2_DV_BT_656_1120; | ||
1094 | |||
1095 | bt->width = (hdmi_read(sd, 0x07) & 0x0f) * 256 + hdmi_read(sd, 0x08); | ||
1096 | bt->height = (hdmi_read(sd, 0x09) & 0x0f) * 256 + hdmi_read(sd, 0x0a); | ||
1097 | bt->pixelclock = (hdmi_read(sd, 0x06) * 1000000) + | ||
1098 | ((hdmi_read(sd, 0x3b) & 0x30) >> 4) * 250000; | ||
1099 | bt->hfrontporch = (hdmi_read(sd, 0x20) & 0x03) * 256 + | ||
1100 | hdmi_read(sd, 0x21); | ||
1101 | bt->hsync = (hdmi_read(sd, 0x22) & 0x03) * 256 + | ||
1102 | hdmi_read(sd, 0x23); | ||
1103 | bt->hbackporch = (hdmi_read(sd, 0x24) & 0x03) * 256 + | ||
1104 | hdmi_read(sd, 0x25); | ||
1105 | bt->vfrontporch = ((hdmi_read(sd, 0x2a) & 0x1f) * 256 + | ||
1106 | hdmi_read(sd, 0x2b)) / 2; | ||
1107 | bt->vsync = ((hdmi_read(sd, 0x2e) & 0x1f) * 256 + | ||
1108 | hdmi_read(sd, 0x2f)) / 2; | ||
1109 | bt->vbackporch = ((hdmi_read(sd, 0x32) & 0x1f) * 256 + | ||
1110 | hdmi_read(sd, 0x33)) / 2; | ||
1111 | bt->polarities = ((hdmi_read(sd, 0x05) & 0x10) ? V4L2_DV_VSYNC_POS_POL : 0) | | ||
1112 | ((hdmi_read(sd, 0x05) & 0x20) ? V4L2_DV_HSYNC_POS_POL : 0); | ||
1113 | if (bt->interlaced == V4L2_DV_INTERLACED) { | ||
1114 | bt->height += (hdmi_read(sd, 0x0b) & 0x0f) * 256 + | ||
1115 | hdmi_read(sd, 0x0c); | ||
1116 | bt->il_vfrontporch = ((hdmi_read(sd, 0x2c) & 0x1f) * 256 + | ||
1117 | hdmi_read(sd, 0x2d)) / 2; | ||
1118 | bt->il_vsync = ((hdmi_read(sd, 0x30) & 0x1f) * 256 + | ||
1119 | hdmi_read(sd, 0x31)) / 2; | ||
1120 | bt->vbackporch = ((hdmi_read(sd, 0x34) & 0x1f) * 256 + | ||
1121 | hdmi_read(sd, 0x35)) / 2; | ||
1122 | } | ||
1123 | adv7604_fill_optional_dv_timings_fields(sd, timings); | ||
1124 | } else { | ||
1125 | /* find format | ||
1126 | * Since LCVS values are inaccurate (REF_03, page 275-276), | ||
1127 | * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails. | ||
1128 | */ | ||
1129 | if (!stdi2dv_timings(sd, &stdi, timings)) | ||
1130 | goto found; | ||
1131 | stdi.lcvs += 1; | ||
1132 | v4l2_dbg(1, debug, sd, "%s: lcvs + 1 = %d\n", __func__, stdi.lcvs); | ||
1133 | if (!stdi2dv_timings(sd, &stdi, timings)) | ||
1134 | goto found; | ||
1135 | stdi.lcvs -= 2; | ||
1136 | v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs); | ||
1137 | if (stdi2dv_timings(sd, &stdi, timings)) { | ||
1138 | v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__); | ||
1139 | return -ERANGE; | ||
1140 | } | ||
1141 | } | ||
1142 | found: | ||
1143 | |||
1144 | if (no_signal(sd)) { | ||
1145 | v4l2_dbg(1, debug, sd, "%s: signal lost during readout\n", __func__); | ||
1146 | memset(timings, 0, sizeof(struct v4l2_dv_timings)); | ||
1147 | return -ENOLINK; | ||
1148 | } | ||
1149 | |||
1150 | if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || | ||
1151 | (DIGITAL_INPUT && bt->pixelclock > 225000000)) { | ||
1152 | v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", | ||
1153 | __func__, (u32)bt->pixelclock); | ||
1154 | return -ERANGE; | ||
1155 | } | ||
1156 | |||
1157 | if (debug > 1) | ||
1158 | adv7604_print_timings(sd, timings, | ||
1159 | "adv7604_query_dv_timings:", true); | ||
1160 | |||
1161 | return 0; | ||
1162 | } | ||
1163 | |||
1164 | static int adv7604_s_dv_timings(struct v4l2_subdev *sd, | ||
1165 | struct v4l2_dv_timings *timings) | ||
1166 | { | ||
1167 | struct adv7604_state *state = to_state(sd); | ||
1168 | struct v4l2_bt_timings *bt; | ||
1169 | |||
1170 | if (!timings) | ||
1171 | return -EINVAL; | ||
1172 | |||
1173 | bt = &timings->bt; | ||
1174 | |||
1175 | if ((!DIGITAL_INPUT && bt->pixelclock > 170000000) || | ||
1176 | (DIGITAL_INPUT && bt->pixelclock > 225000000)) { | ||
1177 | v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n", | ||
1178 | __func__, (u32)bt->pixelclock); | ||
1179 | return -ERANGE; | ||
1180 | } | ||
1181 | adv7604_fill_optional_dv_timings_fields(sd, timings); | ||
1182 | |||
1183 | state->timings = *timings; | ||
1184 | |||
1185 | /* freerun */ | ||
1186 | configure_free_run(sd, bt); | ||
1187 | |||
1188 | set_rgb_quantization_range(sd); | ||
1189 | |||
1190 | |||
1191 | if (debug > 1) | ||
1192 | adv7604_print_timings(sd, timings, | ||
1193 | "adv7604_s_dv_timings:", true); | ||
1194 | return 0; | ||
1195 | } | ||
1196 | |||
1197 | static int adv7604_g_dv_timings(struct v4l2_subdev *sd, | ||
1198 | struct v4l2_dv_timings *timings) | ||
1199 | { | ||
1200 | struct adv7604_state *state = to_state(sd); | ||
1201 | |||
1202 | *timings = state->timings; | ||
1203 | return 0; | ||
1204 | } | ||
1205 | |||
1206 | static void enable_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) | ||
1207 | { | ||
1208 | switch (prim_mode) { | ||
1209 | case ADV7604_PRIM_MODE_COMP: | ||
1210 | case ADV7604_PRIM_MODE_RGB: | ||
1211 | /* enable */ | ||
1212 | io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */ | ||
1213 | break; | ||
1214 | case ADV7604_PRIM_MODE_HDMI_COMP: | ||
1215 | case ADV7604_PRIM_MODE_HDMI_GR: | ||
1216 | /* enable */ | ||
1217 | hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */ | ||
1218 | hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */ | ||
1219 | io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */ | ||
1220 | break; | ||
1221 | default: | ||
1222 | v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", | ||
1223 | __func__, prim_mode); | ||
1224 | break; | ||
1225 | } | ||
1226 | } | ||
1227 | |||
1228 | static void disable_input(struct v4l2_subdev *sd) | ||
1229 | { | ||
1230 | /* disable */ | ||
1231 | io_write(sd, 0x15, 0xbe); /* Tristate all outputs from video core */ | ||
1232 | hdmi_write(sd, 0x1a, 0x1a); /* Mute audio */ | ||
1233 | hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */ | ||
1234 | } | ||
1235 | |||
1236 | static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) | ||
1237 | { | ||
1238 | switch (prim_mode) { | ||
1239 | case ADV7604_PRIM_MODE_COMP: | ||
1240 | case ADV7604_PRIM_MODE_RGB: | ||
1241 | /* set mode and select free run resolution */ | ||
1242 | io_write(sd, 0x00, 0x07); /* video std */ | ||
1243 | io_write(sd, 0x01, 0x02); /* prim mode */ | ||
1244 | /* enable embedded syncs for auto graphics mode */ | ||
1245 | cp_write_and_or(sd, 0x81, 0xef, 0x10); | ||
1246 | |||
1247 | /* reset ADI recommended settings for HDMI: */ | ||
1248 | /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ | ||
1249 | hdmi_write(sd, 0x0d, 0x04); /* HDMI filter optimization */ | ||
1250 | hdmi_write(sd, 0x3d, 0x00); /* DDC bus active pull-up control */ | ||
1251 | hdmi_write(sd, 0x3e, 0x74); /* TMDS PLL optimization */ | ||
1252 | hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ | ||
1253 | hdmi_write(sd, 0x57, 0x74); /* TMDS PLL optimization */ | ||
1254 | hdmi_write(sd, 0x58, 0x63); /* TMDS PLL optimization */ | ||
1255 | hdmi_write(sd, 0x8d, 0x18); /* equaliser */ | ||
1256 | hdmi_write(sd, 0x8e, 0x34); /* equaliser */ | ||
1257 | hdmi_write(sd, 0x93, 0x88); /* equaliser */ | ||
1258 | hdmi_write(sd, 0x94, 0x2e); /* equaliser */ | ||
1259 | hdmi_write(sd, 0x96, 0x00); /* enable automatic EQ changing */ | ||
1260 | |||
1261 | afe_write(sd, 0x00, 0x08); /* power up ADC */ | ||
1262 | afe_write(sd, 0x01, 0x06); /* power up Analog Front End */ | ||
1263 | afe_write(sd, 0xc8, 0x00); /* phase control */ | ||
1264 | |||
1265 | /* set ADI recommended settings for digitizer */ | ||
1266 | /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ | ||
1267 | afe_write(sd, 0x12, 0x7b); /* ADC noise shaping filter controls */ | ||
1268 | afe_write(sd, 0x0c, 0x1f); /* CP core gain controls */ | ||
1269 | cp_write(sd, 0x3e, 0x04); /* CP core pre-gain control */ | ||
1270 | cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ | ||
1271 | cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */ | ||
1272 | break; | ||
1273 | |||
1274 | case ADV7604_PRIM_MODE_HDMI_COMP: | ||
1275 | case ADV7604_PRIM_MODE_HDMI_GR: | ||
1276 | /* set mode and select free run resolution */ | ||
1277 | /* video std */ | ||
1278 | io_write(sd, 0x00, | ||
1279 | (prim_mode == ADV7604_PRIM_MODE_HDMI_GR) ? 0x02 : 0x1e); | ||
1280 | io_write(sd, 0x01, prim_mode); /* prim mode */ | ||
1281 | /* disable embedded syncs for auto graphics mode */ | ||
1282 | cp_write_and_or(sd, 0x81, 0xef, 0x00); | ||
1283 | |||
1284 | /* set ADI recommended settings for HDMI: */ | ||
1285 | /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ | ||
1286 | hdmi_write(sd, 0x0d, 0x84); /* HDMI filter optimization */ | ||
1287 | hdmi_write(sd, 0x3d, 0x10); /* DDC bus active pull-up control */ | ||
1288 | hdmi_write(sd, 0x3e, 0x39); /* TMDS PLL optimization */ | ||
1289 | hdmi_write(sd, 0x4e, 0x3b); /* TMDS PLL optimization */ | ||
1290 | hdmi_write(sd, 0x57, 0xb6); /* TMDS PLL optimization */ | ||
1291 | hdmi_write(sd, 0x58, 0x03); /* TMDS PLL optimization */ | ||
1292 | hdmi_write(sd, 0x8d, 0x18); /* equaliser */ | ||
1293 | hdmi_write(sd, 0x8e, 0x34); /* equaliser */ | ||
1294 | hdmi_write(sd, 0x93, 0x8b); /* equaliser */ | ||
1295 | hdmi_write(sd, 0x94, 0x2d); /* equaliser */ | ||
1296 | hdmi_write(sd, 0x96, 0x01); /* enable automatic EQ changing */ | ||
1297 | |||
1298 | afe_write(sd, 0x00, 0xff); /* power down ADC */ | ||
1299 | afe_write(sd, 0x01, 0xfe); /* power down Analog Front End */ | ||
1300 | afe_write(sd, 0xc8, 0x40); /* phase control */ | ||
1301 | |||
1302 | /* reset ADI recommended settings for digitizer */ | ||
1303 | /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */ | ||
1304 | afe_write(sd, 0x12, 0xfb); /* ADC noise shaping filter controls */ | ||
1305 | afe_write(sd, 0x0c, 0x0d); /* CP core gain controls */ | ||
1306 | cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */ | ||
1307 | cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */ | ||
1308 | cp_write(sd, 0x40, 0x80); /* CP core pre-gain control. Graphics mode */ | ||
1309 | |||
1310 | break; | ||
1311 | default: | ||
1312 | v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", __func__, prim_mode); | ||
1313 | break; | ||
1314 | } | ||
1315 | } | ||
1316 | |||
1317 | static int adv7604_s_routing(struct v4l2_subdev *sd, | ||
1318 | u32 input, u32 output, u32 config) | ||
1319 | { | ||
1320 | struct adv7604_state *state = to_state(sd); | ||
1321 | |||
1322 | v4l2_dbg(2, debug, sd, "%s: input %d", __func__, input); | ||
1323 | |||
1324 | switch (input) { | ||
1325 | case 0: | ||
1326 | /* TODO select HDMI_COMP or HDMI_GR */ | ||
1327 | state->prim_mode = ADV7604_PRIM_MODE_HDMI_COMP; | ||
1328 | break; | ||
1329 | case 1: | ||
1330 | state->prim_mode = ADV7604_PRIM_MODE_RGB; | ||
1331 | break; | ||
1332 | case 2: | ||
1333 | state->prim_mode = ADV7604_PRIM_MODE_COMP; | ||
1334 | break; | ||
1335 | default: | ||
1336 | return -EINVAL; | ||
1337 | } | ||
1338 | |||
1339 | disable_input(sd); | ||
1340 | |||
1341 | select_input(sd, state->prim_mode); | ||
1342 | |||
1343 | enable_input(sd, state->prim_mode); | ||
1344 | |||
1345 | return 0; | ||
1346 | } | ||
1347 | |||
1348 | static int adv7604_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, | ||
1349 | enum v4l2_mbus_pixelcode *code) | ||
1350 | { | ||
1351 | if (index) | ||
1352 | return -EINVAL; | ||
1353 | /* Good enough for now */ | ||
1354 | *code = V4L2_MBUS_FMT_FIXED; | ||
1355 | return 0; | ||
1356 | } | ||
1357 | |||
1358 | static int adv7604_g_mbus_fmt(struct v4l2_subdev *sd, | ||
1359 | struct v4l2_mbus_framefmt *fmt) | ||
1360 | { | ||
1361 | struct adv7604_state *state = to_state(sd); | ||
1362 | |||
1363 | fmt->width = state->timings.bt.width; | ||
1364 | fmt->height = state->timings.bt.height; | ||
1365 | fmt->code = V4L2_MBUS_FMT_FIXED; | ||
1366 | fmt->field = V4L2_FIELD_NONE; | ||
1367 | if (state->timings.bt.standards & V4L2_DV_BT_STD_CEA861) { | ||
1368 | fmt->colorspace = (state->timings.bt.height <= 576) ? | ||
1369 | V4L2_COLORSPACE_SMPTE170M : V4L2_COLORSPACE_REC709; | ||
1370 | } | ||
1371 | return 0; | ||
1372 | } | ||
1373 | |||
1374 | static int adv7604_isr(struct v4l2_subdev *sd, u32 status, bool *handled) | ||
1375 | { | ||
1376 | struct adv7604_state *state = to_state(sd); | ||
1377 | u8 fmt_change, fmt_change_digital, tx_5v; | ||
1378 | |||
1379 | /* format change */ | ||
1380 | fmt_change = io_read(sd, 0x43) & 0x98; | ||
1381 | if (fmt_change) | ||
1382 | io_write(sd, 0x44, fmt_change); | ||
1383 | fmt_change_digital = DIGITAL_INPUT ? (io_read(sd, 0x6b) & 0xc0) : 0; | ||
1384 | if (fmt_change_digital) | ||
1385 | io_write(sd, 0x6c, fmt_change_digital); | ||
1386 | if (fmt_change || fmt_change_digital) { | ||
1387 | v4l2_dbg(1, debug, sd, | ||
1388 | "%s: ADV7604_FMT_CHANGE, fmt_change = 0x%x, fmt_change_digital = 0x%x\n", | ||
1389 | __func__, fmt_change, fmt_change_digital); | ||
1390 | v4l2_subdev_notify(sd, ADV7604_FMT_CHANGE, NULL); | ||
1391 | if (handled) | ||
1392 | *handled = true; | ||
1393 | } | ||
1394 | /* tx 5v detect */ | ||
1395 | tx_5v = io_read(sd, 0x70) & 0x10; | ||
1396 | if (tx_5v) { | ||
1397 | v4l2_dbg(1, debug, sd, "%s: tx_5v: 0x%x\n", __func__, tx_5v); | ||
1398 | io_write(sd, 0x71, tx_5v); | ||
1399 | adv7604_s_detect_tx_5v_ctrl(sd); | ||
1400 | if (handled) | ||
1401 | *handled = true; | ||
1402 | } | ||
1403 | return 0; | ||
1404 | } | ||
1405 | |||
1406 | static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) | ||
1407 | { | ||
1408 | struct adv7604_state *state = to_state(sd); | ||
1409 | |||
1410 | if (edid->pad != 0) | ||
1411 | return -EINVAL; | ||
1412 | if (edid->blocks == 0) | ||
1413 | return -EINVAL; | ||
1414 | if (edid->start_block >= state->edid_blocks) | ||
1415 | return -EINVAL; | ||
1416 | if (edid->start_block + edid->blocks > state->edid_blocks) | ||
1417 | edid->blocks = state->edid_blocks - edid->start_block; | ||
1418 | if (!edid->edid) | ||
1419 | return -EINVAL; | ||
1420 | memcpy(edid->edid + edid->start_block * 128, | ||
1421 | state->edid + edid->start_block * 128, | ||
1422 | edid->blocks * 128); | ||
1423 | return 0; | ||
1424 | } | ||
1425 | |||
1426 | static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid) | ||
1427 | { | ||
1428 | struct adv7604_state *state = to_state(sd); | ||
1429 | int err; | ||
1430 | |||
1431 | if (edid->pad != 0) | ||
1432 | return -EINVAL; | ||
1433 | if (edid->start_block != 0) | ||
1434 | return -EINVAL; | ||
1435 | if (edid->blocks == 0) { | ||
1436 | /* Pull down the hotplug pin */ | ||
1437 | v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)0); | ||
1438 | /* Disables I2C access to internal EDID ram from DDC port */ | ||
1439 | rep_write_and_or(sd, 0x77, 0xf0, 0x0); | ||
1440 | state->edid_blocks = 0; | ||
1441 | /* Fall back to a 16:9 aspect ratio */ | ||
1442 | state->aspect_ratio.numerator = 16; | ||
1443 | state->aspect_ratio.denominator = 9; | ||
1444 | return 0; | ||
1445 | } | ||
1446 | if (edid->blocks > 2) | ||
1447 | return -E2BIG; | ||
1448 | if (!edid->edid) | ||
1449 | return -EINVAL; | ||
1450 | memcpy(state->edid, edid->edid, 128 * edid->blocks); | ||
1451 | state->edid_blocks = edid->blocks; | ||
1452 | state->aspect_ratio = v4l2_calc_aspect_ratio(edid->edid[0x15], | ||
1453 | edid->edid[0x16]); | ||
1454 | err = edid_write_block(sd, 128 * edid->blocks, state->edid); | ||
1455 | if (err < 0) | ||
1456 | v4l2_err(sd, "error %d writing edid\n", err); | ||
1457 | return err; | ||
1458 | } | ||
1459 | |||
1460 | /*********** avi info frame CEA-861-E **************/ | ||
1461 | |||
1462 | static void print_avi_infoframe(struct v4l2_subdev *sd) | ||
1463 | { | ||
1464 | int i; | ||
1465 | u8 buf[14]; | ||
1466 | u8 avi_len; | ||
1467 | u8 avi_ver; | ||
1468 | |||
1469 | if (!(hdmi_read(sd, 0x05) & 0x80)) { | ||
1470 | v4l2_info(sd, "receive DVI-D signal (AVI infoframe not supported)\n"); | ||
1471 | return; | ||
1472 | } | ||
1473 | if (!(io_read(sd, 0x60) & 0x01)) { | ||
1474 | v4l2_info(sd, "AVI infoframe not received\n"); | ||
1475 | return; | ||
1476 | } | ||
1477 | |||
1478 | if (io_read(sd, 0x83) & 0x01) { | ||
1479 | v4l2_info(sd, "AVI infoframe checksum error has occurred earlier\n"); | ||
1480 | io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ | ||
1481 | if (io_read(sd, 0x83) & 0x01) { | ||
1482 | v4l2_info(sd, "AVI infoframe checksum error still present\n"); | ||
1483 | io_write(sd, 0x85, 0x01); /* clear AVI_INF_CKS_ERR_RAW */ | ||
1484 | } | ||
1485 | } | ||
1486 | |||
1487 | avi_len = infoframe_read(sd, 0xe2); | ||
1488 | avi_ver = infoframe_read(sd, 0xe1); | ||
1489 | v4l2_info(sd, "AVI infoframe version %d (%d byte)\n", | ||
1490 | avi_ver, avi_len); | ||
1491 | |||
1492 | if (avi_ver != 0x02) | ||
1493 | return; | ||
1494 | |||
1495 | for (i = 0; i < 14; i++) | ||
1496 | buf[i] = infoframe_read(sd, i); | ||
1497 | |||
1498 | v4l2_info(sd, | ||
1499 | "\t%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", | ||
1500 | buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], | ||
1501 | buf[8], buf[9], buf[10], buf[11], buf[12], buf[13]); | ||
1502 | } | ||
1503 | |||
1504 | static int adv7604_log_status(struct v4l2_subdev *sd) | ||
1505 | { | ||
1506 | struct adv7604_state *state = to_state(sd); | ||
1507 | struct v4l2_dv_timings timings; | ||
1508 | struct stdi_readback stdi; | ||
1509 | u8 reg_io_0x02 = io_read(sd, 0x02); | ||
1510 | |||
1511 | char *csc_coeff_sel_rb[16] = { | ||
1512 | "bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB", | ||
1513 | "reserved", "RGB -> YPbPr601", "reserved", "RGB -> YPbPr709", | ||
1514 | "reserved", "YPbPr709 -> YPbPr601", "YPbPr601 -> YPbPr709", | ||
1515 | "reserved", "reserved", "reserved", "reserved", "manual" | ||
1516 | }; | ||
1517 | char *input_color_space_txt[16] = { | ||
1518 | "RGB limited range (16-235)", "RGB full range (0-255)", | ||
1519 | "YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)", | ||
1520 | "XvYCC Bt.601", "XvYCC Bt.709", | ||
1521 | "YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)", | ||
1522 | "invalid", "invalid", "invalid", "invalid", "invalid", | ||
1523 | "invalid", "invalid", "automatic" | ||
1524 | }; | ||
1525 | char *rgb_quantization_range_txt[] = { | ||
1526 | "Automatic", | ||
1527 | "RGB limited range (16-235)", | ||
1528 | "RGB full range (0-255)", | ||
1529 | }; | ||
1530 | |||
1531 | v4l2_info(sd, "-----Chip status-----\n"); | ||
1532 | v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on"); | ||
1533 | v4l2_info(sd, "Connector type: %s\n", state->connector_hdmi ? | ||
1534 | "HDMI" : (DIGITAL_INPUT ? "DVI-D" : "DVI-A")); | ||
1535 | v4l2_info(sd, "EDID: %s\n", ((rep_read(sd, 0x7d) & 0x01) && | ||
1536 | (rep_read(sd, 0x77) & 0x01)) ? "enabled" : "disabled "); | ||
1537 | v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ? | ||
1538 | "enabled" : "disabled"); | ||
1539 | |||
1540 | v4l2_info(sd, "-----Signal status-----\n"); | ||
1541 | v4l2_info(sd, "Cable detected (+5V power): %s\n", | ||
1542 | (io_read(sd, 0x6f) & 0x10) ? "true" : "false"); | ||
1543 | v4l2_info(sd, "TMDS signal detected: %s\n", | ||
1544 | no_signal_tmds(sd) ? "false" : "true"); | ||
1545 | v4l2_info(sd, "TMDS signal locked: %s\n", | ||
1546 | no_lock_tmds(sd) ? "false" : "true"); | ||
1547 | v4l2_info(sd, "SSPD locked: %s\n", no_lock_sspd(sd) ? "false" : "true"); | ||
1548 | v4l2_info(sd, "STDI locked: %s\n", no_lock_stdi(sd) ? "false" : "true"); | ||
1549 | v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true"); | ||
1550 | v4l2_info(sd, "CP free run: %s\n", | ||
1551 | (!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off")); | ||
1552 | v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x\n", | ||
1553 | io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f); | ||
1554 | |||
1555 | v4l2_info(sd, "-----Video Timings-----\n"); | ||
1556 | if (read_stdi(sd, &stdi)) | ||
1557 | v4l2_info(sd, "STDI: not locked\n"); | ||
1558 | else | ||
1559 | v4l2_info(sd, "STDI: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %s, %chsync, %cvsync\n", | ||
1560 | stdi.lcf, stdi.bl, stdi.lcvs, | ||
1561 | stdi.interlaced ? "interlaced" : "progressive", | ||
1562 | stdi.hs_pol, stdi.vs_pol); | ||
1563 | if (adv7604_query_dv_timings(sd, &timings)) | ||
1564 | v4l2_info(sd, "No video detected\n"); | ||
1565 | else | ||
1566 | adv7604_print_timings(sd, &timings, "Detected format:", true); | ||
1567 | adv7604_print_timings(sd, &state->timings, "Configured format:", true); | ||
1568 | |||
1569 | v4l2_info(sd, "-----Color space-----\n"); | ||
1570 | v4l2_info(sd, "RGB quantization range ctrl: %s\n", | ||
1571 | rgb_quantization_range_txt[state->rgb_quantization_range]); | ||
1572 | v4l2_info(sd, "Input color space: %s\n", | ||
1573 | input_color_space_txt[reg_io_0x02 >> 4]); | ||
1574 | v4l2_info(sd, "Output color space: %s %s, saturator %s\n", | ||
1575 | (reg_io_0x02 & 0x02) ? "RGB" : "YCbCr", | ||
1576 | (reg_io_0x02 & 0x04) ? "(16-235)" : "(0-255)", | ||
1577 | ((reg_io_0x02 & 0x04) ^ (reg_io_0x02 & 0x01)) ? | ||
1578 | "enabled" : "disabled"); | ||
1579 | v4l2_info(sd, "Color space conversion: %s\n", | ||
1580 | csc_coeff_sel_rb[cp_read(sd, 0xfc) >> 4]); | ||
1581 | |||
1582 | /* Digital video */ | ||
1583 | if (DIGITAL_INPUT) { | ||
1584 | v4l2_info(sd, "-----HDMI status-----\n"); | ||
1585 | v4l2_info(sd, "HDCP encrypted content: %s\n", | ||
1586 | hdmi_read(sd, 0x05) & 0x40 ? "true" : "false"); | ||
1587 | |||
1588 | print_avi_infoframe(sd); | ||
1589 | } | ||
1590 | |||
1591 | return 0; | ||
1592 | } | ||
1593 | |||
1594 | /* ----------------------------------------------------------------------- */ | ||
1595 | |||
1596 | static const struct v4l2_ctrl_ops adv7604_ctrl_ops = { | ||
1597 | .s_ctrl = adv7604_s_ctrl, | ||
1598 | }; | ||
1599 | |||
1600 | static const struct v4l2_subdev_core_ops adv7604_core_ops = { | ||
1601 | .log_status = adv7604_log_status, | ||
1602 | .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, | ||
1603 | .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, | ||
1604 | .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, | ||
1605 | .g_ctrl = v4l2_subdev_g_ctrl, | ||
1606 | .s_ctrl = v4l2_subdev_s_ctrl, | ||
1607 | .queryctrl = v4l2_subdev_queryctrl, | ||
1608 | .querymenu = v4l2_subdev_querymenu, | ||
1609 | .g_chip_ident = adv7604_g_chip_ident, | ||
1610 | .interrupt_service_routine = adv7604_isr, | ||
1611 | #ifdef CONFIG_VIDEO_ADV_DEBUG | ||
1612 | .g_register = adv7604_g_register, | ||
1613 | .s_register = adv7604_s_register, | ||
1614 | #endif | ||
1615 | }; | ||
1616 | |||
1617 | static const struct v4l2_subdev_video_ops adv7604_video_ops = { | ||
1618 | .s_routing = adv7604_s_routing, | ||
1619 | .g_input_status = adv7604_g_input_status, | ||
1620 | .s_dv_timings = adv7604_s_dv_timings, | ||
1621 | .g_dv_timings = adv7604_g_dv_timings, | ||
1622 | .query_dv_timings = adv7604_query_dv_timings, | ||
1623 | .enum_dv_timings = adv7604_enum_dv_timings, | ||
1624 | .dv_timings_cap = adv7604_dv_timings_cap, | ||
1625 | .enum_mbus_fmt = adv7604_enum_mbus_fmt, | ||
1626 | .g_mbus_fmt = adv7604_g_mbus_fmt, | ||
1627 | .try_mbus_fmt = adv7604_g_mbus_fmt, | ||
1628 | .s_mbus_fmt = adv7604_g_mbus_fmt, | ||
1629 | }; | ||
1630 | |||
1631 | static const struct v4l2_subdev_pad_ops adv7604_pad_ops = { | ||
1632 | .get_edid = adv7604_get_edid, | ||
1633 | .set_edid = adv7604_set_edid, | ||
1634 | }; | ||
1635 | |||
1636 | static const struct v4l2_subdev_ops adv7604_ops = { | ||
1637 | .core = &adv7604_core_ops, | ||
1638 | .video = &adv7604_video_ops, | ||
1639 | .pad = &adv7604_pad_ops, | ||
1640 | }; | ||
1641 | |||
1642 | /* -------------------------- custom ctrls ---------------------------------- */ | ||
1643 | |||
1644 | static const struct v4l2_ctrl_config adv7604_ctrl_analog_sampling_phase = { | ||
1645 | .ops = &adv7604_ctrl_ops, | ||
1646 | .id = V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE, | ||
1647 | .name = "Analog Sampling Phase", | ||
1648 | .type = V4L2_CTRL_TYPE_INTEGER, | ||
1649 | .min = 0, | ||
1650 | .max = 0x1f, | ||
1651 | .step = 1, | ||
1652 | .def = 0, | ||
1653 | }; | ||
1654 | |||
1655 | static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color_manual = { | ||
1656 | .ops = &adv7604_ctrl_ops, | ||
1657 | .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL, | ||
1658 | .name = "Free Running Color, Manual", | ||
1659 | .type = V4L2_CTRL_TYPE_BOOLEAN, | ||
1660 | .min = false, | ||
1661 | .max = true, | ||
1662 | .step = 1, | ||
1663 | .def = false, | ||
1664 | }; | ||
1665 | |||
1666 | static const struct v4l2_ctrl_config adv7604_ctrl_free_run_color = { | ||
1667 | .ops = &adv7604_ctrl_ops, | ||
1668 | .id = V4L2_CID_ADV_RX_FREE_RUN_COLOR, | ||
1669 | .name = "Free Running Color", | ||
1670 | .type = V4L2_CTRL_TYPE_INTEGER, | ||
1671 | .min = 0x0, | ||
1672 | .max = 0xffffff, | ||
1673 | .step = 0x1, | ||
1674 | .def = 0x0, | ||
1675 | }; | ||
1676 | |||
1677 | /* ----------------------------------------------------------------------- */ | ||
1678 | |||
1679 | static int adv7604_core_init(struct v4l2_subdev *sd) | ||
1680 | { | ||
1681 | struct adv7604_state *state = to_state(sd); | ||
1682 | struct adv7604_platform_data *pdata = &state->pdata; | ||
1683 | |||
1684 | hdmi_write(sd, 0x48, | ||
1685 | (pdata->disable_pwrdnb ? 0x80 : 0) | | ||
1686 | (pdata->disable_cable_det_rst ? 0x40 : 0)); | ||
1687 | |||
1688 | disable_input(sd); | ||
1689 | |||
1690 | /* power */ | ||
1691 | io_write(sd, 0x0c, 0x42); /* Power up part and power down VDP */ | ||
1692 | io_write(sd, 0x0b, 0x44); /* Power down ESDP block */ | ||
1693 | cp_write(sd, 0xcf, 0x01); /* Power down macrovision */ | ||
1694 | |||
1695 | /* video format */ | ||
1696 | io_write_and_or(sd, 0x02, 0xf0, | ||
1697 | pdata->alt_gamma << 3 | | ||
1698 | pdata->op_656_range << 2 | | ||
1699 | pdata->rgb_out << 1 | | ||
1700 | pdata->alt_data_sat << 0); | ||
1701 | io_write(sd, 0x03, pdata->op_format_sel); | ||
1702 | io_write_and_or(sd, 0x04, 0x1f, pdata->op_ch_sel << 5); | ||
1703 | io_write_and_or(sd, 0x05, 0xf0, pdata->blank_data << 3 | | ||
1704 | pdata->insert_av_codes << 2 | | ||
1705 | pdata->replicate_av_codes << 1 | | ||
1706 | pdata->invert_cbcr << 0); | ||
1707 | |||
1708 | /* TODO from platform data */ | ||
1709 | cp_write(sd, 0x69, 0x30); /* Enable CP CSC */ | ||
1710 | io_write(sd, 0x06, 0xa6); /* positive VS and HS */ | ||
1711 | io_write(sd, 0x14, 0x7f); /* Drive strength adjusted to max */ | ||
1712 | cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */ | ||
1713 | cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */ | ||
1714 | cp_write(sd, 0xf9, 0x23); /* STDI ch. 1 - LCVS change threshold - | ||
1715 | ADI recommended setting [REF_01 c. 2.3.3] */ | ||
1716 | cp_write(sd, 0x45, 0x23); /* STDI ch. 2 - LCVS change threshold - | ||
1717 | ADI recommended setting [REF_01 c. 2.3.3] */ | ||
1718 | cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution | ||
1719 | for digital formats */ | ||
1720 | |||
1721 | /* TODO from platform data */ | ||
1722 | afe_write(sd, 0xb5, 0x01); /* Setting MCLK to 256Fs */ | ||
1723 | |||
1724 | afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */ | ||
1725 | io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4); | ||
1726 | |||
1727 | state->prim_mode = pdata->prim_mode; | ||
1728 | select_input(sd, pdata->prim_mode); | ||
1729 | |||
1730 | enable_input(sd, pdata->prim_mode); | ||
1731 | |||
1732 | /* interrupts */ | ||
1733 | io_write(sd, 0x40, 0xc2); /* Configure INT1 */ | ||
1734 | io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */ | ||
1735 | io_write(sd, 0x46, 0x98); /* Enable SSPD, STDI and CP unlocked interrupts */ | ||
1736 | io_write(sd, 0x6e, 0xc0); /* Enable V_LOCKED and DE_REGEN_LCK interrupts */ | ||
1737 | io_write(sd, 0x73, 0x10); /* Enable CABLE_DET_A_ST (+5v) interrupt */ | ||
1738 | |||
1739 | return v4l2_ctrl_handler_setup(sd->ctrl_handler); | ||
1740 | } | ||
1741 | |||
1742 | static void adv7604_unregister_clients(struct adv7604_state *state) | ||
1743 | { | ||
1744 | if (state->i2c_avlink) | ||
1745 | i2c_unregister_device(state->i2c_avlink); | ||
1746 | if (state->i2c_cec) | ||
1747 | i2c_unregister_device(state->i2c_cec); | ||
1748 | if (state->i2c_infoframe) | ||
1749 | i2c_unregister_device(state->i2c_infoframe); | ||
1750 | if (state->i2c_esdp) | ||
1751 | i2c_unregister_device(state->i2c_esdp); | ||
1752 | if (state->i2c_dpp) | ||
1753 | i2c_unregister_device(state->i2c_dpp); | ||
1754 | if (state->i2c_afe) | ||
1755 | i2c_unregister_device(state->i2c_afe); | ||
1756 | if (state->i2c_repeater) | ||
1757 | i2c_unregister_device(state->i2c_repeater); | ||
1758 | if (state->i2c_edid) | ||
1759 | i2c_unregister_device(state->i2c_edid); | ||
1760 | if (state->i2c_hdmi) | ||
1761 | i2c_unregister_device(state->i2c_hdmi); | ||
1762 | if (state->i2c_test) | ||
1763 | i2c_unregister_device(state->i2c_test); | ||
1764 | if (state->i2c_cp) | ||
1765 | i2c_unregister_device(state->i2c_cp); | ||
1766 | if (state->i2c_vdp) | ||
1767 | i2c_unregister_device(state->i2c_vdp); | ||
1768 | } | ||
1769 | |||
1770 | static struct i2c_client *adv7604_dummy_client(struct v4l2_subdev *sd, | ||
1771 | u8 addr, u8 io_reg) | ||
1772 | { | ||
1773 | struct i2c_client *client = v4l2_get_subdevdata(sd); | ||
1774 | |||
1775 | if (addr) | ||
1776 | io_write(sd, io_reg, addr << 1); | ||
1777 | return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1); | ||
1778 | } | ||
1779 | |||
1780 | static int adv7604_probe(struct i2c_client *client, | ||
1781 | const struct i2c_device_id *id) | ||
1782 | { | ||
1783 | struct adv7604_state *state; | ||
1784 | struct adv7604_platform_data *pdata = client->dev.platform_data; | ||
1785 | struct v4l2_ctrl_handler *hdl; | ||
1786 | struct v4l2_subdev *sd; | ||
1787 | int err; | ||
1788 | |||
1789 | /* Check if the adapter supports the needed features */ | ||
1790 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | ||
1791 | return -EIO; | ||
1792 | v4l_dbg(1, debug, client, "detecting adv7604 client on address 0x%x\n", | ||
1793 | client->addr << 1); | ||
1794 | |||
1795 | state = kzalloc(sizeof(struct adv7604_state), GFP_KERNEL); | ||
1796 | if (!state) { | ||
1797 | v4l_err(client, "Could not allocate adv7604_state memory!\n"); | ||
1798 | return -ENOMEM; | ||
1799 | } | ||
1800 | |||
1801 | /* platform data */ | ||
1802 | if (!pdata) { | ||
1803 | v4l_err(client, "No platform data!\n"); | ||
1804 | err = -ENODEV; | ||
1805 | goto err_state; | ||
1806 | } | ||
1807 | memcpy(&state->pdata, pdata, sizeof(state->pdata)); | ||
1808 | |||
1809 | sd = &state->sd; | ||
1810 | v4l2_i2c_subdev_init(sd, client, &adv7604_ops); | ||
1811 | sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | ||
1812 | state->connector_hdmi = pdata->connector_hdmi; | ||
1813 | |||
1814 | /* i2c access to adv7604? */ | ||
1815 | if (adv_smbus_read_byte_data_check(client, 0xfb, false) != 0x68) { | ||
1816 | v4l2_info(sd, "not an adv7604 on address 0x%x\n", | ||
1817 | client->addr << 1); | ||
1818 | err = -ENODEV; | ||
1819 | goto err_state; | ||
1820 | } | ||
1821 | |||
1822 | /* control handlers */ | ||
1823 | hdl = &state->hdl; | ||
1824 | v4l2_ctrl_handler_init(hdl, 9); | ||
1825 | |||
1826 | v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, | ||
1827 | V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); | ||
1828 | v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, | ||
1829 | V4L2_CID_CONTRAST, 0, 255, 1, 128); | ||
1830 | v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, | ||
1831 | V4L2_CID_SATURATION, 0, 255, 1, 128); | ||
1832 | v4l2_ctrl_new_std(hdl, &adv7604_ctrl_ops, | ||
1833 | V4L2_CID_HUE, 0, 128, 1, 0); | ||
1834 | |||
1835 | /* private controls */ | ||
1836 | state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL, | ||
1837 | V4L2_CID_DV_RX_POWER_PRESENT, 0, 1, 0, 0); | ||
1838 | state->detect_tx_5v_ctrl->is_private = true; | ||
1839 | state->rgb_quantization_range_ctrl = | ||
1840 | v4l2_ctrl_new_std_menu(hdl, &adv7604_ctrl_ops, | ||
1841 | V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, | ||
1842 | 0, V4L2_DV_RGB_RANGE_AUTO); | ||
1843 | state->rgb_quantization_range_ctrl->is_private = true; | ||
1844 | |||
1845 | /* custom controls */ | ||
1846 | state->analog_sampling_phase_ctrl = | ||
1847 | v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_analog_sampling_phase, NULL); | ||
1848 | state->analog_sampling_phase_ctrl->is_private = true; | ||
1849 | state->free_run_color_manual_ctrl = | ||
1850 | v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color_manual, NULL); | ||
1851 | state->free_run_color_manual_ctrl->is_private = true; | ||
1852 | state->free_run_color_ctrl = | ||
1853 | v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_free_run_color, NULL); | ||
1854 | state->free_run_color_ctrl->is_private = true; | ||
1855 | |||
1856 | sd->ctrl_handler = hdl; | ||
1857 | if (hdl->error) { | ||
1858 | err = hdl->error; | ||
1859 | goto err_hdl; | ||
1860 | } | ||
1861 | if (adv7604_s_detect_tx_5v_ctrl(sd)) { | ||
1862 | err = -ENODEV; | ||
1863 | goto err_hdl; | ||
1864 | } | ||
1865 | |||
1866 | state->i2c_avlink = adv7604_dummy_client(sd, pdata->i2c_avlink, 0xf3); | ||
1867 | state->i2c_cec = adv7604_dummy_client(sd, pdata->i2c_cec, 0xf4); | ||
1868 | state->i2c_infoframe = adv7604_dummy_client(sd, pdata->i2c_infoframe, 0xf5); | ||
1869 | state->i2c_esdp = adv7604_dummy_client(sd, pdata->i2c_esdp, 0xf6); | ||
1870 | state->i2c_dpp = adv7604_dummy_client(sd, pdata->i2c_dpp, 0xf7); | ||
1871 | state->i2c_afe = adv7604_dummy_client(sd, pdata->i2c_afe, 0xf8); | ||
1872 | state->i2c_repeater = adv7604_dummy_client(sd, pdata->i2c_repeater, 0xf9); | ||
1873 | state->i2c_edid = adv7604_dummy_client(sd, pdata->i2c_edid, 0xfa); | ||
1874 | state->i2c_hdmi = adv7604_dummy_client(sd, pdata->i2c_hdmi, 0xfb); | ||
1875 | state->i2c_test = adv7604_dummy_client(sd, pdata->i2c_test, 0xfc); | ||
1876 | state->i2c_cp = adv7604_dummy_client(sd, pdata->i2c_cp, 0xfd); | ||
1877 | state->i2c_vdp = adv7604_dummy_client(sd, pdata->i2c_vdp, 0xfe); | ||
1878 | if (!state->i2c_avlink || !state->i2c_cec || !state->i2c_infoframe || | ||
1879 | !state->i2c_esdp || !state->i2c_dpp || !state->i2c_afe || | ||
1880 | !state->i2c_repeater || !state->i2c_edid || !state->i2c_hdmi || | ||
1881 | !state->i2c_test || !state->i2c_cp || !state->i2c_vdp) { | ||
1882 | err = -ENOMEM; | ||
1883 | v4l2_err(sd, "failed to create all i2c clients\n"); | ||
1884 | goto err_i2c; | ||
1885 | } | ||
1886 | |||
1887 | /* work queues */ | ||
1888 | state->work_queues = create_singlethread_workqueue(client->name); | ||
1889 | if (!state->work_queues) { | ||
1890 | v4l2_err(sd, "Could not create work queue\n"); | ||
1891 | err = -ENOMEM; | ||
1892 | goto err_i2c; | ||
1893 | } | ||
1894 | |||
1895 | INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug, | ||
1896 | adv7604_delayed_work_enable_hotplug); | ||
1897 | |||
1898 | state->pad.flags = MEDIA_PAD_FL_SOURCE; | ||
1899 | err = media_entity_init(&sd->entity, 1, &state->pad, 0); | ||
1900 | if (err) | ||
1901 | goto err_work_queues; | ||
1902 | |||
1903 | err = adv7604_core_init(sd); | ||
1904 | if (err) | ||
1905 | goto err_entity; | ||
1906 | v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, | ||
1907 | client->addr << 1, client->adapter->name); | ||
1908 | return 0; | ||
1909 | |||
1910 | err_entity: | ||
1911 | media_entity_cleanup(&sd->entity); | ||
1912 | err_work_queues: | ||
1913 | cancel_delayed_work(&state->delayed_work_enable_hotplug); | ||
1914 | destroy_workqueue(state->work_queues); | ||
1915 | err_i2c: | ||
1916 | adv7604_unregister_clients(state); | ||
1917 | err_hdl: | ||
1918 | v4l2_ctrl_handler_free(hdl); | ||
1919 | err_state: | ||
1920 | kfree(state); | ||
1921 | return err; | ||
1922 | } | ||
1923 | |||
1924 | /* ----------------------------------------------------------------------- */ | ||
1925 | |||
1926 | static int adv7604_remove(struct i2c_client *client) | ||
1927 | { | ||
1928 | struct v4l2_subdev *sd = i2c_get_clientdata(client); | ||
1929 | struct adv7604_state *state = to_state(sd); | ||
1930 | |||
1931 | cancel_delayed_work(&state->delayed_work_enable_hotplug); | ||
1932 | destroy_workqueue(state->work_queues); | ||
1933 | v4l2_device_unregister_subdev(sd); | ||
1934 | media_entity_cleanup(&sd->entity); | ||
1935 | adv7604_unregister_clients(to_state(sd)); | ||
1936 | v4l2_ctrl_handler_free(sd->ctrl_handler); | ||
1937 | kfree(to_state(sd)); | ||
1938 | return 0; | ||
1939 | } | ||
1940 | |||
1941 | /* ----------------------------------------------------------------------- */ | ||
1942 | |||
1943 | static struct i2c_device_id adv7604_id[] = { | ||
1944 | { "adv7604", 0 }, | ||
1945 | { } | ||
1946 | }; | ||
1947 | MODULE_DEVICE_TABLE(i2c, adv7604_id); | ||
1948 | |||
1949 | static struct i2c_driver adv7604_driver = { | ||
1950 | .driver = { | ||
1951 | .owner = THIS_MODULE, | ||
1952 | .name = "adv7604", | ||
1953 | }, | ||
1954 | .probe = adv7604_probe, | ||
1955 | .remove = adv7604_remove, | ||
1956 | .id_table = adv7604_id, | ||
1957 | }; | ||
1958 | |||
1959 | module_i2c_driver(adv7604_driver); | ||