[ARM] 3639/1: S3C2412: serial port support

Patch from Ben Dooks

Serial port support for the on-board UART blocks
on the Samsung S3C2412 and S3C2413 UARTs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 148 insertions, 4 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index bef4a9622ed7..5b48ac22c9c5 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -354,21 +354,24 @@ config SERIAL_CLPS711X_CONSOLE
           kernel at boot time.)
 
 config SERIAL_S3C2410
-        tristate "Samsung S3C2410 Serial port support"
+        tristate "Samsung S3C2410/S3C2440/S3C2442/S3C2412 Serial port support"
         depends on ARM && ARCH_S3C2410
         select SERIAL_CORE
         help
-          Support for the on-chip UARTs on the Samsung S3C2410X CPU,
+          Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
           providing /dev/ttySAC0, 1 and 2 (note, some machines may not
           provide all of these ports, depending on how the serial port
           pins are configured.
 
+          Currently this driver supports the UARTS on the S3C2410, S3C2440,
+          S3C2442, S3C2412 and S3C2413 CPUs.
+
 config SERIAL_S3C2410_CONSOLE
         bool "Support for console on S3C2410 serial port"
         depends on SERIAL_S3C2410=y
         select SERIAL_CORE_CONSOLE
         help
-          Allow selection of the S3C2410 on-board serial ports for use as
+          Allow selection of the S3C24XX on-board serial ports for use as
           an virtual console.
 
           Even if you say Y here, the currently visible virtual console
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 53c2465bad2d..837b6da520b3 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -872,6 +872,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
                 return "S3C2410";
         case PORT_S3C2440:
                 return "S3C2440";
+        case PORT_S3C2412:
+                return "S3C2412";
         default:
                 return NULL;
         }
@@ -1528,6 +1530,141 @@ static inline void s3c2440_serial_exit(void)
 #define s3c2440_uart_inf_at NULL
 #endif /* CONFIG_CPU_S3C2440 */
 
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+
+static int s3c2412_serial_setsource(struct uart_port *port,
+                                     struct s3c24xx_uart_clksrc *clk)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        ucon &= ~S3C2412_UCON_CLKMASK;
+
+        if (strcmp(clk->name, "uclk") == 0)
+                ucon |= S3C2440_UCON_UCLK;
+        else if (strcmp(clk->name, "pclk") == 0)
+                ucon |= S3C2440_UCON_PCLK;
+        else if (strcmp(clk->name, "usysclk") == 0)
+                ucon |= S3C2412_UCON_USYSCLK;
+        else {
+                printk(KERN_ERR "unknown clock source %s\n", clk->name);
+                return -EINVAL;
+        }
+
+        wr_regl(port, S3C2410_UCON, ucon);
+        return 0;
+}
+
+
+static int s3c2412_serial_getsource(struct uart_port *port,
+                                    struct s3c24xx_uart_clksrc *clk)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        switch (ucon & S3C2412_UCON_CLKMASK) {
+        case S3C2412_UCON_UCLK:
+                clk->divisor = 1;
+                clk->name = "uclk";
+                break;
+
+        case S3C2412_UCON_PCLK:
+        case S3C2412_UCON_PCLK2:
+                clk->divisor = 1;
+                clk->name = "pclk";
+                break;
+
+        case S3C2412_UCON_USYSCLK:
+                clk->divisor = 1;
+                clk->name = "usysclk";
+                break;
+        }
+
+        return 0;
+}
+
+static int s3c2412_serial_resetport(struct uart_port *port,
+                                    struct s3c2410_uartcfg *cfg)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        dbg("%s: port=%p (%08lx), cfg=%p\n",
+            __FUNCTION__, port, port->mapbase, cfg);
+
+        /* ensure we don't change the clock settings... */
+
+        ucon &= S3C2412_UCON_CLKMASK;
+
+        wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+        wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+        /* reset both fifos */
+
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+        return 0;
+}
+
+static struct s3c24xx_uart_info s3c2412_uart_inf = {
+        .name           = "Samsung S3C2412 UART",
+        .type           = PORT_S3C2412,
+        .fifosize       = 64,
+        .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
+        .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
+        .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
+        .tx_fifofull    = S3C2440_UFSTAT_TXFULL,
+        .tx_fifomask    = S3C2440_UFSTAT_TXMASK,
+        .tx_fifoshift   = S3C2440_UFSTAT_TXSHIFT,
+        .get_clksrc     = s3c2412_serial_getsource,
+        .set_clksrc     = s3c2412_serial_setsource,
+        .reset_port     = s3c2412_serial_resetport,
+};
+
+/* device management */
+
+static int s3c2412_serial_probe(struct platform_device *dev)
+{
+        dbg("s3c2440_serial_probe: dev=%p\n", dev);
+        return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
+}
+
+static struct platform_driver s3c2412_serial_drv = {
+        .probe          = s3c2412_serial_probe,
+        .remove         = s3c24xx_serial_remove,
+        .suspend        = s3c24xx_serial_suspend,
+        .resume         = s3c24xx_serial_resume,
+        .driver         = {
+                .name   = "s3c2412-uart",
+                .owner  = THIS_MODULE,
+        },
+};
+
+
+static inline int s3c2412_serial_init(void)
+{
+        return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+}
+
+static inline void s3c2412_serial_exit(void)
+{
+        platform_driver_unregister(&s3c2412_serial_drv);
+}
+
+#define s3c2412_uart_inf_at &s3c2412_uart_inf
+#else
+
+static inline int s3c2412_serial_init(void)
+{
+        return 0;
+}
+
+static inline void s3c2412_serial_exit(void)
+{
+}
+
+#define s3c2412_uart_inf_at NULL
+#endif /* CONFIG_CPU_S3C2440 */
+
+
 /* module initialisation code */
 
 static int __init s3c24xx_serial_modinit(void)
@@ -1542,6 +1679,7 @@ static int __init s3c24xx_serial_modinit(void)
 
         s3c2400_serial_init();
         s3c2410_serial_init();
+        s3c2412_serial_init();
         s3c2440_serial_init();
 
         return 0;
@@ -1551,6 +1689,7 @@ static void __exit s3c24xx_serial_modexit(void)
 {
         s3c2400_serial_exit();
         s3c2410_serial_exit();
+        s3c2412_serial_exit();
         s3c2440_serial_exit();
 
         uart_unregister_driver(&s3c24xx_uart_drv);
@@ -1773,6 +1912,8 @@ static int s3c24xx_serial_initconsole(void)
                 info = s3c2410_uart_inf_at;
         } else if (strcmp(dev->name, "s3c2440-uart") == 0) {
                 info = s3c2440_uart_inf_at;
+        } else if (strcmp(dev->name, "s3c2412-uart") == 0) {
+                info = s3c2412_uart_inf_at;
         } else {
                 printk(KERN_ERR "s3c24xx: no driver for %s\n", dev->name);
                 return 0;
@@ -1796,4 +1937,4 @@ console_initcall(s3c24xx_serial_initconsole);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2410/S3C2440 Serial port driver");
+MODULE_DESCRIPTION("Samsung S3C2410/S3C2440/S3C2412 Serial port driver");