Merge tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of small USB fixes for 3.4-rc5.

  Nothing major, as before, some USB gadget fixes.  There's a crash fix
  for a number of ASUS laptops on resume that had been reported by a
  number of different people.  We think the fix might also pertain to
  other machines, as this was a BIOS bug, and they seem to travel to
  different models and manufacturers quite easily.  Other than that,
  some other reported problems fixed as well."

* tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc-core: fix incompatibility with dummy-hcd
  usb: gadget: udc-core: fix wrong call order
  USB: cdc-wdm: fix race leading leading to memory corruption
  USB: EHCI: fix crash during suspend on ASUS computers
  usb gadget: uvc: uvc_request_data::length field must be signed
  usb: gadget: dummy: do not call pullup() on udc_stop()
  usb: musb: davinci.c: add missing unregister
  usb: musb: drop __deprecated flag
  USB: gadget: storage gadgets send wrong error code for unknown commands
  usb: otg: gpio_vbus: Add otg transceiver events and notifiers

12 files changed, 45 insertions, 12 deletions

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index c6f6560d436c..0bb2b3248dad 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb)
         spin_lock(&desc->iuspin);
         desc->werr = urb->status;
         spin_unlock(&desc->iuspin);
-        clear_bit(WDM_IN_USE, &desc->flags);
         kfree(desc->outbuf);
+        desc->outbuf = NULL;
+        clear_bit(WDM_IN_USE, &desc->flags);
         wake_up(&desc->wait);
 }
 
@@ -338,7 +339,7 @@ static ssize_t wdm_write
         if (we < 0)
                 return -EIO;
 
-        desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+        buf = kmalloc(count, GFP_KERNEL);
         if (!buf) {
                 rv = -ENOMEM;
                 goto outnl;
@@ -406,10 +407,12 @@ static ssize_t wdm_write
         req->wIndex = desc->inum;
         req->wLength = cpu_to_le16(count);
         set_bit(WDM_IN_USE, &desc->flags);
+        desc->outbuf = buf;
 
         rv = usb_submit_urb(desc->command, GFP_KERNEL);
         if (rv < 0) {
                 kfree(buf);
+                desc->outbuf = NULL;
                 clear_bit(WDM_IN_USE, &desc->flags);
                 dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
         } else {
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 622b4a48e732..57ed9e400c06 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
         pci_save_state(pci_dev);
 
+        /*
+         * Some systems crash if an EHCI controller is in D3 during
+         * a sleep transition.  We have to leave such controllers in D0.
+         */
+        if (hcd->broken_pci_sleep) {
+                dev_dbg(dev, "Staying in PCI D0\n");
+                return retval;
+        }
+
         /* If the root hub is dead rather than suspended, disallow remote
          * wakeup.  usb_hc_died() should ensure that both hosts are marked as
          * dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a6dfd2164166..170cbe89d9f8 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g,
 
         dum->driver = NULL;
 
-        dummy_pullup(&dum->gadget, 0);
         return 0;
 }
 
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index a371e966425f..cb8c162cae5a 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2189,7 +2189,7 @@ unknown_cmnd:
                 common->data_size_from_cmnd = 0;
                 sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
                 reply = check_command(common, common->cmnd_size,
-                                      DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+                                      DATA_DIR_UNKNOWN, ~0, 0, unknown);
                 if (reply == 0) {
                         common->curlun->sense_data = SS_INVALID_COMMAND;
                         reply = -EINVAL;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 4fac56927741..a896d73f7a93 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
                 fsg->data_size_from_cmnd = 0;
                 sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
                 if ((reply = check_command(fsg, fsg->cmnd_size,
-                                DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+                                DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
                         fsg->curlun->sense_data = SS_INVALID_COMMAND;
                         reply = -EINVAL;
                 }
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 2fa9865babed..e5e44f8cde9a 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
 
         if (udc_is_newstyle(udc)) {
                 udc->driver->disconnect(udc->gadget);
-                udc->driver->unbind(udc->gadget);
                 usb_gadget_disconnect(udc->gadget);
+                udc->driver->unbind(udc->gadget);
                 usb_gadget_udc_stop(udc->gadget, udc->driver);
         } else {
                 usb_gadget_stop(udc->gadget, udc->driver);
@@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
                         usb_gadget_udc_start(udc->gadget, udc->driver);
                 usb_gadget_connect(udc->gadget);
         } else if (sysfs_streq(buf, "disconnect")) {
+                usb_gadget_disconnect(udc->gadget);
                 if (udc_is_newstyle(udc))
                         usb_gadget_udc_stop(udc->gadget, udc->driver);
-                usb_gadget_disconnect(udc->gadget);
         } else {
                 dev_err(dev, "unsupported command '%s'\n", buf);
                 return -EINVAL;
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index bc78c606c12b..ca4e03a1c73a 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -28,7 +28,7 @@
 
 struct uvc_request_data
 {
-        unsigned int length;
+        __s32 length;
         __u8 data[60];
 };
 
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index f6e083b50191..54d7ca559cb2 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
         if (data->length < 0)
                 return usb_ep_set_halt(cdev->gadget->ep0);
 
-        req->length = min(uvc->event_length, data->length);
+        req->length = min_t(unsigned int, uvc->event_length, data->length);
         req->zero = data->length < uvc->event_length;
         req->dma = DMA_ADDR_INVALID;
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb7241d6ef..fe8dc069164e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                         hcd->has_tt = 1;
                         tdi_reset(ehci);
                 }
+                if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
+                        /* EHCI #1 or #2 on 6 Series/C200 Series chipset */
+                        if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
+                                ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
+                                hcd->broken_pci_sleep = 1;
+                                device_set_wakeup_capable(&pdev->dev, false);
+                        }
+                }
                 break;
         case PCI_VENDOR_ID_TDI:
                 if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 97ab975fa442..768b4b55c816 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb)
         usb_nop_xceiv_register();
         musb->xceiv = usb_get_transceiver();
         if (!musb->xceiv)
-                return -ENODEV;
+                goto unregister;
 
         musb->mregs += DAVINCI_BASE_OFFSET;
 
@@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb)
 
 fail:
         usb_put_transceiver(musb->xceiv);
+unregister:
         usb_nop_xceiv_unregister();
         return -ENODEV;
 }
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 93de517a32a0..f4a40f001c88 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -449,7 +449,7 @@ struct musb {
          * We added this flag to forcefully disable double
          * buffering until we get it working.
          */
-        unsigned                double_buffer_not_ok:1 __deprecated;
+        unsigned                double_buffer_not_ok:1;
 
         struct musb_hdrc_config *config;
 
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 3ece43a2e4c1..a0a2178974fe 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work)
         struct gpio_vbus_data *gpio_vbus =
                 container_of(work, struct gpio_vbus_data, work);
         struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
-        int gpio;
+        int gpio, status;
 
         if (!gpio_vbus->phy.otg->gadget)
                 return;
@@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work)
          */
         gpio = pdata->gpio_pullup;
         if (is_vbus_powered(pdata)) {
+                status = USB_EVENT_VBUS;
                 gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+                gpio_vbus->phy.last_event = status;
                 usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
 
                 /* drawing a "unit load" is *always* OK, except for OTG */
@@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work)
                 /* optionally enable D+ pullup */
                 if (gpio_is_valid(gpio))
                         gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
+
+                atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+                                           status, gpio_vbus->phy.otg->gadget);
         } else {
                 /* optionally disable D+ pullup */
                 if (gpio_is_valid(gpio))
@@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work)
                 set_vbus_draw(gpio_vbus, 0);
 
                 usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+                status = USB_EVENT_NONE;
                 gpio_vbus->phy.state = OTG_STATE_B_IDLE;
+                gpio_vbus->phy.last_event = status;
+
+                atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+                                           status, gpio_vbus->phy.otg->gadget);
         }
 }
 
@@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
                         irq, err);
                 goto err_irq;
         }
+
+        ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier);
+
         INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
 
         gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");