net: smsc911x: fix skb handling in receive path

The SMSC911x driver resets the ->head, ->data and ->tail pointers in the
skb on the reset path in order to avoid buffer overflow due to packet
padding performed by the hardware.

This patch fixes the receive path so that the skb pointers are fixed up
after the data has been read from the device, The error path is also
fixed to use number of words consistently and prevent erroneous FIFO
fastforwarding when skipping over bad data.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 5 insertions, 9 deletions

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 4a6971027076..5aa2dbe2bfb5 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1166,10 +1166,8 @@ smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat)
 
 /* Quickly dumps bad packets */
 static void
-smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes)
+smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords)
 {
-        unsigned int pktwords = (pktbytes + NET_IP_ALIGN + 3) >> 2;
-
         if (likely(pktwords >= 4)) {
                 unsigned int timeout = 500;
                 unsigned int val;
@@ -1233,7 +1231,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
                         continue;
                 }
 
-                skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN);
+                skb = netdev_alloc_skb(dev, pktwords << 2);
                 if (unlikely(!skb)) {
                         SMSC_WARN(pdata, rx_err,
                                   "Unable to allocate skb for rx packet");
@@ -1243,14 +1241,12 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
                         break;
                 }
 
-                skb->data = skb->head;
-                skb_reset_tail_pointer(skb);
+                pdata->ops->rx_readfifo(pdata,
+                                 (unsigned int *)skb->data, pktwords);
 
                 /* Align IP on 16B boundary */
                 skb_reserve(skb, NET_IP_ALIGN);
                 skb_put(skb, pktlength - 4);
-                pdata->ops->rx_readfifo(pdata,
-                                 (unsigned int *)skb->head, pktwords);
                 skb->protocol = eth_type_trans(skb, dev);
                 skb_checksum_none_assert(skb);
                 netif_receive_skb(skb);
@@ -1565,7 +1561,7 @@ static int smsc911x_open(struct net_device *dev)
         smsc911x_reg_write(pdata, FIFO_INT, temp);
 
         /* set RX Data offset to 2 bytes for alignment */
-        smsc911x_reg_write(pdata, RX_CFG, (2 << 8));
+        smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8));
 
         /* enable NAPI polling before enabling RX interrupts */
         napi_enable(&pdata->napi);