mtd: add GPMI-NAND driver in the config and Makefile

add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Koen Beel <koen.beel@barco.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>

3 files changed, 17 insertions, 0 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7ec5b494583f..42b7b861c74a 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -417,6 +417,19 @@ config MTD_NAND_NANDSIM
           The simulator may simulate various NAND flash chips for the
           MTD nand layer.
 
+config MTD_NAND_GPMI_NAND
+        bool "GPMI NAND Flash Controller driver"
+        depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+        select MTD_PARTITIONS
+        select MTD_CMDLINE_PARTS
+        help
+         Enables NAND Flash support for IMX23 or IMX28.
+         The GPMI controller is very powerful, with the help of BCH
+         module, it can do the hardware ECC. The GPMI supports several
+         NAND flashs at the same time. The GPMI may conflicts with other
+         block, such as SD card. So pay attention to it when you enable
+         the GPMI.
+
 config MTD_NAND_PLATFORM
         tristate "Support for generic platform NAND driver"
         help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index c9334e9af912..618f4ba23699 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -48,5 +48,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI)		+= bcm_umi_nand.o nand_bcm_umi.o
 obj-$(CONFIG_MTD_NAND_MPC5121_NFC)      += mpc5121_nfc.o
 obj-$(CONFIG_MTD_NAND_RICOH)            += r852.o
 obj-$(CONFIG_MTD_NAND_JZ4740)           += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND)        += gpmi-nand/
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/gpmi-nand/Makefile b/drivers/mtd/nand/gpmi-nand/Makefile
new file mode 100644
index 000000000000..3a462487c35e
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o