[PATCH] md: support stripe/offset mode in raid10

The "industry standard" DDF format allows for a stripe/offset layout where
data is duplicated on different stripes.  e.g.

  A  B  C  D
  D  A  B  C
  E  F  G  H
  H  E  F  G

(columns are drives, rows are stripes, LETTERS are chunks of data).

This is similar to raid10's 'far' mode, but not quite the same.  So enhance
'far' mode with a 'far/offset' option which follows the layout of DDFs
stripe/offset.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 43 insertions, 21 deletions

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 2ca18770575f..4db34edfd87f 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -29,6 +29,7 @@
  *    raid_disks
  *    near_copies (stored in low byte of layout)
  *    far_copies (stored in second byte of layout)
+ *    far_offset (stored in bit 16 of layout )
  *
  * The data to be stored is divided into chunks using chunksize.
  * Each device is divided into far_copies sections.
@@ -36,10 +37,14 @@
  * near_copies copies of each chunk is stored (each on a different drive).
  * The starting device for each section is offset near_copies from the starting
  * device of the previous section.
- * Thus there are (near_copies*far_copies) of each chunk, and each is on a different
+ * Thus they are (near_copies*far_copies) of each chunk, and each is on a different
  * drive.
  * near_copies and far_copies must be at least one, and their product is at most
  * raid_disks.
+ *
+ * If far_offset is true, then the far_copies are handled a bit differently.
+ * The copies are still in different stripes, but instead of be very far apart
+ * on disk, there are adjacent stripes.
  */
 
 /*
@@ -357,8 +362,7 @@ static int raid10_end_write_request(struct bio *bio, unsigned int bytes_done, in
  * With this layout, and block is never stored twice on the one device.
  *
  * raid10_find_phys finds the sector offset of a given virtual sector
- * on each device that it is on. If a block isn't on a device,
- * that entry in the array is set to MaxSector.
+ * on each device that it is on.
  *
  * raid10_find_virt does the reverse mapping, from a device and a
  * sector offset to a virtual address
@@ -381,6 +385,8 @@ static void raid10_find_phys(conf_t *conf, r10bio_t *r10bio)
         chunk *= conf->near_copies;
         stripe = chunk;
         dev = sector_div(stripe, conf->raid_disks);
+        if (conf->far_offset)
+                stripe *= conf->far_copies;
 
         sector += stripe << conf->chunk_shift;
 
@@ -414,16 +420,24 @@ static sector_t raid10_find_virt(conf_t *conf, sector_t sector, int dev)
 {
         sector_t offset, chunk, vchunk;
 
-        while (sector > conf->stride) {
-                sector -= conf->stride;
-                if (dev < conf->near_copies)
-                        dev += conf->raid_disks - conf->near_copies;
-                else
-                        dev -= conf->near_copies;
-        }
-
         offset = sector & conf->chunk_mask;
-        chunk = sector >> conf->chunk_shift;
+        if (conf->far_offset) {
+                int fc;
+                chunk = sector >> conf->chunk_shift;
+                fc = sector_div(chunk, conf->far_copies);
+                dev -= fc * conf->near_copies;
+                if (dev < 0)
+                        dev += conf->raid_disks;
+        } else {
+                while (sector > conf->stride) {
+                        sector -= conf->stride;
+                        if (dev < conf->near_copies)
+                                dev += conf->raid_disks - conf->near_copies;
+                        else
+                                dev -= conf->near_copies;
+                }
+                chunk = sector >> conf->chunk_shift;
+        }
         vchunk = chunk * conf->raid_disks + dev;
         sector_div(vchunk, conf->near_copies);
         return (vchunk << conf->chunk_shift) + offset;
@@ -900,9 +914,12 @@ static void status(struct seq_file *seq, mddev_t *mddev)
                 seq_printf(seq, " %dK chunks", mddev->chunk_size/1024);
         if (conf->near_copies > 1)
                 seq_printf(seq, " %d near-copies", conf->near_copies);
-        if (conf->far_copies > 1)
-                seq_printf(seq, " %d far-copies", conf->far_copies);
-
+        if (conf->far_copies > 1) {
+                if (conf->far_offset)
+                        seq_printf(seq, " %d offset-copies", conf->far_copies);
+                else
+                        seq_printf(seq, " %d far-copies", conf->far_copies);
+        }
         seq_printf(seq, " [%d/%d] [", conf->raid_disks,
                                                 conf->working_disks);
         for (i = 0; i < conf->raid_disks; i++)
@@ -1915,7 +1932,7 @@ static int run(mddev_t *mddev)
         mirror_info_t *disk;
         mdk_rdev_t *rdev;
         struct list_head *tmp;
-        int nc, fc;
+        int nc, fc, fo;
         sector_t stride, size;
 
         if (mddev->chunk_size == 0) {
@@ -1925,8 +1942,9 @@ static int run(mddev_t *mddev)
 
         nc = mddev->layout & 255;
         fc = (mddev->layout >> 8) & 255;
+        fo = mddev->layout & (1<<16);
         if ((nc*fc) <2 || (nc*fc) > mddev->raid_disks ||
-            (mddev->layout >> 16)) {
+            (mddev->layout >> 17)) {
                 printk(KERN_ERR "raid10: %s: unsupported raid10 layout: 0x%8x\n",
                        mdname(mddev), mddev->layout);
                 goto out;
@@ -1958,12 +1976,16 @@ static int run(mddev_t *mddev)
         conf->near_copies = nc;
         conf->far_copies = fc;
         conf->copies = nc*fc;
+        conf->far_offset = fo;
         conf->chunk_mask = (sector_t)(mddev->chunk_size>>9)-1;
         conf->chunk_shift = ffz(~mddev->chunk_size) - 9;
-        stride = mddev->size >> (conf->chunk_shift-1);
-        sector_div(stride, fc);
-        conf->stride = stride << conf->chunk_shift;
-
+        if (fo)
+                conf->stride = 1 << conf->chunk_shift;
+        else {
+                stride = mddev->size >> (conf->chunk_shift-1);
+                sector_div(stride, fc);
+                conf->stride = stride << conf->chunk_shift;
+        }
         conf->r10bio_pool = mempool_create(NR_RAID10_BIOS, r10bio_pool_alloc,
                                                 r10bio_pool_free, conf);
         if (!conf->r10bio_pool) {