Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [PATCH] powerpc: update cell_defconfig
  [PATCH] spufs: Disable local interrupts for SPE hash_page calls.
  [PATCH] powerpc: Add cputable entry for POWER6
  [PATCH] ppc32 CPM_UART: Fixed odd address translations
  [PATCH] ppc32: Update board-specific code of the CPM UART users
  [PATCH] ppc32 CPM_UART: Convert to use platform devices
  [PATCH] ppc32: odd fixes and improvements in ppc_sys
  [PATCH] powerpc: Wire up *at syscalls
  [PATCH] ppc32: add 440GX erratum 440_43 workaround
  [PATCH] powerpc: Use check_legacy_ioport() on ppc32 too.
  [PATCH] powerpc64: Fix loading of modules without a .toc section
  [PATCH] sound/ppc: snd_pmac_toonie_init should be __init
  powerpc/pseries: Tell firmware our capabilities on new machines
  [PATCH] powerpc: Fix pagetable bloat for hugepages

6 files changed, 268 insertions, 135 deletions

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index bedb689b051f..dff1e67b1dd4 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4301,7 +4301,7 @@ static int __init floppy_init(void)
         }
 
         use_virtual_dma = can_use_virtual_dma & 1;
-#if defined(CONFIG_PPC64)
+#if defined(CONFIG_PPC_MERGE)
         if (check_legacy_ioport(FDC1)) {
                 del_timer(&fd_timeout);
                 err = -ENODEV;
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index 9a9221644250..cc21914fbc72 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -67,14 +67,14 @@ static inline int i8042_platform_init(void)
  * On some platforms touching the i8042 data register region can do really
  * bad things. Because of this the region is always reserved on such boxes.
  */
-#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC64)
+#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC_MERGE)
         if (!request_region(I8042_DATA_REG, 16, "i8042"))
                 return -EBUSY;
 #endif
 
         i8042_reset = 1;
 
-#if defined(CONFIG_PPC64)
+#if defined(CONFIG_PPC_MERGE)
         if (check_legacy_ioport(I8042_DATA_REG))
                 return -EBUSY;
         if (!request_region(I8042_DATA_REG, 16, "i8042"))
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 73c8a088c160..aa5eb7ddeda9 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -10,6 +10,8 @@
 #define CPM_UART_H
 
 #include <linux/config.h>
+#include <linux/platform_device.h>
+#include <linux/fs_uart_pd.h>
 
 #if defined(CONFIG_CPM2)
 #include "cpm_uart_cpm2.h"
@@ -26,14 +28,14 @@
 #define FLAG_SMC        0x00000002
 #define FLAG_CONSOLE    0x00000001
 
-#define UART_SMC1       0
-#define UART_SMC2       1
-#define UART_SCC1       2
-#define UART_SCC2       3
-#define UART_SCC3       4
-#define UART_SCC4       5
+#define UART_SMC1       fsid_smc1_uart
+#define UART_SMC2       fsid_smc2_uart
+#define UART_SCC1       fsid_scc1_uart
+#define UART_SCC2       fsid_scc2_uart
+#define UART_SCC3       fsid_scc3_uart
+#define UART_SCC4       fsid_scc4_uart
 
-#define UART_NR 6
+#define UART_NR         fs_uart_nr
 
 #define RX_NUM_FIFO     4
 #define RX_BUF_SIZE     32
@@ -64,6 +66,7 @@ struct uart_cpm_port {
         uint                     dp_addr;
         void                    *mem_addr;
         dma_addr_t               dma_addr;
+        u32                     mem_size;
         /* helpers */
         int                      baud;
         int                      bits;
@@ -90,4 +93,36 @@ void scc2_lineif(struct uart_cpm_port *pinfo);
 void scc3_lineif(struct uart_cpm_port *pinfo);
 void scc4_lineif(struct uart_cpm_port *pinfo);
 
+/*
+   virtual to phys transtalion
+*/
+static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo)
+{
+        int offset;
+        u32 val = (u32)addr;
+        /* sane check */
+        if ((val >= (u32)pinfo->mem_addr) &&
+                        (val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
+                offset = val - (u32)pinfo->mem_addr;
+                return pinfo->dma_addr+offset;
+        }
+        printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
+        return 0;
+}
+
+static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo)
+{
+        int offset;
+        u32 val = addr;
+        /* sane check */
+        if ((val >= pinfo->dma_addr) &&
+                        (val<(pinfo->dma_addr + pinfo->mem_size))) {
+                offset = val - (u32)pinfo->dma_addr;
+                return (void*)(pinfo->mem_addr+offset);
+        }
+        printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val);
+        return 0;
+}
+
+
 #endif /* CPM_UART_H */
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index b7bf4c698a47..ced193bf9e1e 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -41,6 +41,7 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/dma-mapping.h>
+#include <linux/fs_uart_pd.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -60,7 +61,7 @@
 /* Track which ports are configured as uarts */
 int cpm_uart_port_map[UART_NR];
 /* How many ports did we config as uarts */
-int cpm_uart_nr;
+int cpm_uart_nr = 0;
 
 /**************************************************************/
 
@@ -71,18 +72,36 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /**************************************************************/
 
-static inline unsigned long cpu2cpm_addr(void *addr)
+
+/* Place-holder for board-specific stuff */
+struct platform_device* __attribute__ ((weak)) __init
+early_uart_get_pdev(int index)
 {
-        if ((unsigned long)addr >= CPM_ADDR)
-                return (unsigned long)addr;
-        return virt_to_bus(addr);
+        return NULL;
 }
 
-static inline void *cpm2cpu_addr(unsigned long addr)
+
+void cpm_uart_count(void)
 {
-        if (addr >= CPM_ADDR)
-                return (void *)addr;
-        return bus_to_virt(addr);
+        cpm_uart_nr = 0;
+#ifdef CONFIG_SERIAL_CPM_SMC1
+        cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SMC2
+        cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC1
+        cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC2
+        cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC3
+        cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC4
+        cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
+#endif
 }
 
 /*
@@ -258,7 +277,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
                 }
 
                 /* get pointer */
-                cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+                cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
                 /* loop through the buffer */
                 while (i-- > 0) {
@@ -601,7 +620,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
                 /* Pick next descriptor and fill from buffer */
                 bdp = pinfo->tx_cur;
 
-                p = cpm2cpu_addr(bdp->cbd_bufaddr);
+                p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
                 *p++ = port->x_char;
                 bdp->cbd_datlen = 1;
@@ -628,7 +647,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 
         while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
                 count = 0;
-                p = cpm2cpu_addr(bdp->cbd_bufaddr);
+                p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
                 while (count < pinfo->tx_fifosize) {
                         *p++ = xmit->buf[xmit->tail];
                         xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -677,12 +696,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
         mem_addr = pinfo->mem_addr;
         bdp = pinfo->rx_cur = pinfo->rx_bd_base;
         for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
-                bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+                bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
                 bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
                 mem_addr += pinfo->rx_fifosize;
         }
 
-        bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+        bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
         bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
 
         /* Set the physical address of the host memory
@@ -692,12 +711,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
         mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
         bdp = pinfo->tx_cur = pinfo->tx_bd_base;
         for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
-                bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+                bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
                 bdp->cbd_sc = BD_SC_INTRPT;
                 mem_addr += pinfo->tx_fifosize;
         }
 
-        bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+        bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
         bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
 }
 
@@ -829,14 +848,6 @@ static int cpm_uart_request_port(struct uart_port *port)
         if (pinfo->flags & FLAG_CONSOLE)
                 return 0;
 
-        /*
-         * Setup any port IO, connect any baud rate generators,
-         * etc.  This is expected to be handled by board
-         * dependant code
-         */
-        if (pinfo->set_lineif)
-                pinfo->set_lineif(pinfo);
-
         if (IS_SMC(pinfo)) {
                 pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
                 pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@@ -988,6 +999,54 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
         },
 };
 
+int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
+{
+        struct resource *r;
+        struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
+        int idx = pdata->fs_no; /* It is UART_SMCx or UART_SCCx index */
+        struct uart_cpm_port *pinfo;
+        int line;
+        u32 mem, pram;
+
+        for (line=0; line<UART_NR && cpm_uart_port_map[line]!=pdata->fs_no; line++);
+
+        pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
+
+        pinfo->brg = pdata->brg;
+
+        if (!is_con) {
+                pinfo->port.line = line;
+                pinfo->port.flags = UPF_BOOT_AUTOCONF;
+        }
+
+        if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
+                return -EINVAL;
+        mem = r->start;
+
+        if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
+                return -EINVAL;
+        pram = r->start;
+
+        if(idx > fsid_smc2_uart) {
+                pinfo->sccp = (scc_t *)mem;
+                pinfo->sccup = (scc_uart_t *)pram;
+        } else {
+                pinfo->smcp = (smc_t *)mem;
+                pinfo->smcup = (smc_uart_t *)pram;
+        }
+        pinfo->tx_nrfifos = pdata->tx_num_fifo;
+        pinfo->tx_fifosize = pdata->tx_buf_size;
+
+        pinfo->rx_nrfifos = pdata->rx_num_fifo;
+        pinfo->rx_fifosize = pdata->rx_buf_size;
+
+        pinfo->port.uartclk = pdata->uart_clk;
+        pinfo->port.mapbase = (unsigned long)mem;
+        pinfo->port.irq = platform_get_irq(pdev, 0);
+
+        return 0;
+}
+
 #ifdef CONFIG_SERIAL_CPM_CONSOLE
 /*
  *      Print a string to the serial port trying not to disturb
@@ -1027,7 +1086,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
                  * If the buffer address is in the CPM DPRAM, don't
                  * convert it.
                  */
-                cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+                cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
                 *cp = *s;
 
@@ -1044,7 +1103,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
                         while ((bdp->cbd_sc & BD_SC_READY) != 0)
                                 ;
 
-                        cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+                        cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
                         *cp = 13;
                         bdp->cbd_datlen = 1;
@@ -1067,9 +1126,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
         pinfo->tx_cur = (volatile cbd_t *) bdp;
 }
 
-/*
- * Setup console. Be careful is called early !
- */
+
 static int __init cpm_uart_console_setup(struct console *co, char *options)
 {
         struct uart_port *port;
@@ -1080,9 +1137,27 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
         int flow = 'n';
         int ret;
 
+        struct fs_uart_platform_info *pdata;
+        struct platform_device* pdev = early_uart_get_pdev(co->index);
+
         port =
             (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
         pinfo = (struct uart_cpm_port *)port;
+        if (!pdev) {
+                pr_info("cpm_uart: console: compat mode\n");
+                /* compatibility - will be cleaned up */
+                cpm_uart_init_portdesc();
+
+                if (pinfo->set_lineif)
+                        pinfo->set_lineif(pinfo);
+        } else {
+                pdata = pdev->dev.platform_data;
+                if (pdata)
+                        if (pdata->init_ioports)
+                                pdata->init_ioports();
+
+                cpm_uart_drv_get_platform_data(pdev, 1);
+        }
 
         pinfo->flags |= FLAG_CONSOLE;
 
@@ -1097,14 +1172,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
                         baud = 9600;
         }
 
-        /*
-         * Setup any port IO, connect any baud rate generators,
-         * etc.  This is expected to be handled by board
-         * dependant code
-         */
-        if (pinfo->set_lineif)
-                pinfo->set_lineif(pinfo);
-
         if (IS_SMC(pinfo)) {
                 pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
                 pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@@ -1143,11 +1210,8 @@ static struct console cpm_scc_uart_console = {
 
 int __init cpm_uart_console_init(void)
 {
-        int ret = cpm_uart_init_portdesc();
-
-        if (!ret)
-                register_console(&cpm_scc_uart_console);
-        return ret;
+        register_console(&cpm_scc_uart_console);
+        return 0;
 }
 
 console_initcall(cpm_uart_console_init);
@@ -1165,44 +1229,130 @@ static struct uart_driver cpm_reg = {
         .minor          = SERIAL_CPM_MINOR,
         .cons           = CPM_UART_CONSOLE,
 };
-
-static int __init cpm_uart_init(void)
+static int cpm_uart_drv_probe(struct device *dev)
 {
-        int ret, i;
-
-        printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n");
+        struct platform_device  *pdev = to_platform_device(dev);
+        struct fs_uart_platform_info *pdata;
+        int ret = -ENODEV;
 
-#ifndef CONFIG_SERIAL_CPM_CONSOLE
-        ret = cpm_uart_init_portdesc();
-        if (ret)
+        if(!pdev) {
+                printk(KERN_ERR"CPM UART: platform data missing!\n");
                 return ret;
-#endif
+        }
 
-        cpm_reg.nr = cpm_uart_nr;
-        ret = uart_register_driver(&cpm_reg);
+        pdata = pdev->dev.platform_data;
+        pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n",
+                        cpm_uart_port_map[pdata->fs_no]);
 
-        if (ret)
+        if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
                 return ret;
 
-        for (i = 0; i < cpm_uart_nr; i++) {
-                int con = cpm_uart_port_map[i];
-                cpm_uart_ports[con].port.line = i;
-                cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
-                uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
-        }
+        if (pdata->init_ioports)
+                pdata->init_ioports();
 
-        return ret;
+        ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
+
+        return ret;
 }
 
-static void __exit cpm_uart_exit(void)
+static int cpm_uart_drv_remove(struct device *dev)
+{
+        struct platform_device  *pdev = to_platform_device(dev);
+        struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
+
+        pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
+                        cpm_uart_port_map[pdata->fs_no]);
+
+        uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
+        return 0;
+}
+
+static struct device_driver cpm_smc_uart_driver = {
+        .name   = "fsl-cpm-smc:uart",
+        .bus    = &platform_bus_type,
+        .probe  = cpm_uart_drv_probe,
+        .remove = cpm_uart_drv_remove,
+};
+
+static struct device_driver cpm_scc_uart_driver = {
+        .name   = "fsl-cpm-scc:uart",
+        .bus    = &platform_bus_type,
+        .probe  = cpm_uart_drv_probe,
+        .remove = cpm_uart_drv_remove,
+};
+
+/*
+   This is supposed to match uart devices on platform bus,
+   */
+static int match_is_uart (struct device* dev, void* data)
 {
+        struct platform_device* pdev = container_of(dev, struct platform_device, dev);
+        int ret = 0;
+        /* this was setfunc as uart */
+        if(strstr(pdev->name,":uart")) {
+                ret = 1;
+        }
+        return ret;
+}
+
+
+static int cpm_uart_init(void) {
+
+        int ret;
         int i;
+        struct device *dev;
+        printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
+
+        /* lookup the bus for uart devices */
+        dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
+
+        /* There are devices on the bus - all should be OK  */
+        if (dev) {
+                cpm_uart_count();
+                cpm_reg.nr = cpm_uart_nr;
+
+                if (!(ret = uart_register_driver(&cpm_reg))) {
+                        if ((ret = driver_register(&cpm_smc_uart_driver))) {
+                                uart_unregister_driver(&cpm_reg);
+                                return ret;
+                        }
+                        if ((ret = driver_register(&cpm_scc_uart_driver))) {
+                                driver_unregister(&cpm_scc_uart_driver);
+                                uart_unregister_driver(&cpm_reg);
+                        }
+                }
+        } else {
+        /* No capable platform devices found - falling back to legacy mode */
+                pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
+                pr_info(
+                "cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
+#ifndef CONFIG_SERIAL_CPM_CONSOLE
+                ret = cpm_uart_init_portdesc();
+                if (ret)
+                        return ret;
+#endif
+
+                cpm_reg.nr = cpm_uart_nr;
+                ret = uart_register_driver(&cpm_reg);
+
+                if (ret)
+                        return ret;
+
+                for (i = 0; i < cpm_uart_nr; i++) {
+                        int con = cpm_uart_port_map[i];
+                        cpm_uart_ports[con].port.line = i;
+                        cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+                        uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
+                }
 
-        for (i = 0; i < cpm_uart_nr; i++) {
-                int con = cpm_uart_port_map[i];
-                uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port);
         }
+        return ret;
+}
 
+static void __exit cpm_uart_exit(void)
+{
+        driver_unregister(&cpm_scc_uart_driver);
+        driver_unregister(&cpm_smc_uart_driver);
         uart_unregister_driver(&cpm_reg);
 }
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index d789ee55cbb7..a5a30622637a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -81,58 +81,11 @@ void cpm_line_cr_cmd(int line, int cmd)
 
 void smc1_lineif(struct uart_cpm_port *pinfo)
 {
-        volatile cpm8xx_t *cp = cpmp;
-
-        (void)cp;       /* fix warning */
-#if defined (CONFIG_MPC885ADS)
-        /* Enable SMC1 transceivers */
-        {
-                cp->cp_pepar |= 0x000000c0;
-                cp->cp_pedir &= ~0x000000c0;
-                cp->cp_peso &= ~0x00000040;
-                cp->cp_peso |= 0x00000080;
-        }
-#elif defined (CONFIG_MPC86XADS)
-        unsigned int iobits = 0x000000c0;
-
-        if (!pinfo->is_portb) {
-                cp->cp_pbpar |= iobits;
-                cp->cp_pbdir &= ~iobits;
-                cp->cp_pbodr &= ~iobits;
-        } else {
-                ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
-                ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
-                ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
-        }
-#endif
         pinfo->brg = 1;
 }
 
 void smc2_lineif(struct uart_cpm_port *pinfo)
 {
-        volatile cpm8xx_t *cp = cpmp;
-
-        (void)cp;       /* fix warning */
-#if defined (CONFIG_MPC885ADS)
-        cp->cp_pepar |= 0x00000c00;
-        cp->cp_pedir &= ~0x00000c00;
-        cp->cp_peso &= ~0x00000400;
-        cp->cp_peso |= 0x00000800;
-#elif defined (CONFIG_MPC86XADS)
-        unsigned int iobits = 0x00000c00;
-
-        if (!pinfo->is_portb) {
-                cp->cp_pbpar |= iobits;
-                cp->cp_pbdir &= ~iobits;
-                cp->cp_pbodr &= ~iobits;
-        } else {
-                ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
-                ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
-                ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
-        }
-
-#endif
-
         pinfo->brg = 2;
 }
 
@@ -191,7 +144,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
                 /* was hostalloc but changed cause it blows away the */
                 /* large tlb mapping when pinning the kernel area    */
                 mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
-                dma_addr = 0;
+                dma_addr = (u32)mem_addr;
         } else
                 mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
                                               GFP_KERNEL);
@@ -204,8 +157,9 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
         }
 
         pinfo->dp_addr = dp_offset;
-        pinfo->mem_addr = mem_addr;
-        pinfo->dma_addr = dma_addr;
+        pinfo->mem_addr = mem_addr;             /*  virtual address*/
+        pinfo->dma_addr = dma_addr;             /*  physical address*/
+        pinfo->mem_size = memsz;
 
         pinfo->rx_buf = mem_addr;
         pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index fd9e53ed3feb..7c6b07aeea92 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -142,14 +142,6 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
          * be supported in a sane fashion.
          */
 #ifndef CONFIG_STX_GP3
-#ifdef CONFIG_MPC8560_ADS
-        volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
-        io->iop_ppard |= 0x00000018;
-        io->iop_psord &= ~0x00000008;   /* Rx */
-        io->iop_psord &= ~0x00000010;   /* Tx */
-        io->iop_pdird &= ~0x00000008;   /* Rx */
-        io->iop_pdird |= 0x00000010;    /* Tx */
-#else
         volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
         io->iop_pparb |= 0x008b0000;
         io->iop_pdirb |= 0x00880000;
@@ -157,7 +149,6 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
         io->iop_pdirb &= ~0x00030000;
         io->iop_psorb &= ~0x00030000;
 #endif
-#endif
         cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
         cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
         pinfo->brg = 2;
@@ -218,8 +209,10 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 
         memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
             L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
-        if (is_con)
+        if (is_con) {
                 mem_addr = alloc_bootmem(memsz);
+                dma_addr = mem_addr;
+        }
         else
                 mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
                                               GFP_KERNEL);
@@ -234,6 +227,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
         pinfo->dp_addr = dp_offset;
         pinfo->mem_addr = mem_addr;
         pinfo->dma_addr = dma_addr;
+        pinfo->mem_size = memsz;
 
         pinfo->rx_buf = mem_addr;
         pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos