bnx2x: Fix waiting for reset complete on BCM848x3 PHYs

BCM848x3 requires additional of 50ms after reset done indication,
instead of fixed time of 200ms

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 5 insertions, 3 deletions

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 89b33e27f614..b6588c5411ea 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -5302,7 +5302,7 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
 {
         struct bnx2x *bp = params->bp;
         u16 autoneg_val, an_1000_val, an_10_100_val;
-        bnx2x_wait_reset_complete(bp, phy);
+
         bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4,
                       1 << NIG_LATCH_BC_ENABLE_MI_INT);
 
@@ -5431,6 +5431,7 @@ static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy,
 
         /* HW reset */
         bnx2x_ext_phy_hw_reset(bp, params->port);
+        bnx2x_wait_reset_complete(bp, phy);
 
         bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
         return bnx2x_848xx_cmn_config_init(phy, params, vars);
@@ -5453,8 +5454,9 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
                        MISC_REGISTERS_GPIO_OUTPUT_HIGH,
                        port);
-        msleep(200); /* 100 is not enough */
-
+        bnx2x_wait_reset_complete(bp, phy);
+        /* Wait for GPHY to come out of reset */
+        msleep(50);
         /* BCM84823 requires that XGXS links up first @ 10G for normal
         behavior */
         temp = vars->line_speed;