[ARM] 5130/4: Support for the at91sam9g20

Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.

AT91sam9g20 is an evolution of the at91sam9260 with a faster clock
speed.
We created a new board for this device but based the chip support
directly on 9260 files with little updates.
Here is the chip page on Atmel wabsite:
http://atmel.com/dyn/products/product_card.asp?part_id=4337

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Justin Waters <justin.waters@timesys.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 3 insertions, 3 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9f6cc8a56073..be3b13cf4177 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -217,7 +217,7 @@ config MII
 
 config MACB
         tristate "Atmel MACB support"
-        depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
+        depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
         select PHYLIB
         help
           The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 274c60a970cd..b6b2a0a5ba37 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -888,7 +888,7 @@ static void pullup(struct at91_udc *udc, int is_on)
                 at91_udp_write(udc, AT91_UDP_TXVC, 0);
                 if (cpu_is_at91rm9200())
                         gpio_set_value(udc->board.pullup_pin, active);
-                else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
+                else if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
                         u32     txvc = at91_udp_read(udc, AT91_UDP_TXVC);
 
                         txvc |= AT91_UDP_TXVC_PUON;
@@ -906,7 +906,7 @@ static void pullup(struct at91_udc *udc, int is_on)
                 at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
                 if (cpu_is_at91rm9200())
                         gpio_set_value(udc->board.pullup_pin, !active);
-                else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
+                else if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
                         u32     txvc = at91_udp_read(udc, AT91_UDP_TXVC);
 
                         txvc &= ~AT91_UDP_TXVC_PUON;