pata_hpt37x: add proper cable detection methods

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 56 insertions, 30 deletions

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index d0a7df2e5ca7..378a8f862e82 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -303,6 +303,59 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
 }
 
 /**
+ *      hpt37x_cable_detect     -       Detect the cable type
+ *      @ap: ATA port to detect on
+ *
+ *      Return the cable type attached to this port
+ */
+
+static int hpt37x_cable_detect(struct ata_port *ap)
+{
+        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        u8 scr2, ata66;
+
+        pci_read_config_byte(pdev, 0x5B, &scr2);
+        pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
+        /* Cable register now active */
+        pci_read_config_byte(pdev, 0x5A, &ata66);
+        /* Restore state */
+        pci_write_config_byte(pdev, 0x5B, scr2);
+
+        if (ata66 & (2 >> ap->port_no))
+                return ATA_CBL_PATA40;
+        else
+                return ATA_CBL_PATA80;
+}
+
+/**
+ *      hpt374_fn1_cable_detect -       Detect the cable type
+ *      @ap: ATA port to detect on
+ *
+ *      Return the cable type attached to this port
+ */
+
+static int hpt374_fn1_cable_detect(struct ata_port *ap)
+{
+        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        unsigned int mcrbase = 0x50 + 4 * ap->port_no;
+        u16 mcr3;
+        u8 ata66;
+
+        /* Do the extra channel work */
+        pci_read_config_word(pdev, mcrbase + 2, &mcr3);
+        /* Set bit 15 of 0x52 to enable TCBLID as input */
+        pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000);
+        pci_read_config_byte(pdev, 0x5A, &ata66);
+        /* Reset TCBLID/FCBLID to output */
+        pci_write_config_word(pdev, mcrbase + 2, mcr3);
+
+        if (ata66 & (2 >> ap->port_no))
+                return ATA_CBL_PATA40;
+        else
+                return ATA_CBL_PATA80;
+}
+
+/**
  *      hpt37x_pre_reset        -       reset the hpt37x bus
  *      @link: ATA link to reset
  *      @deadline: deadline jiffies for the operation
@@ -312,7 +365,6 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
 
 static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
 {
-        u8 scr2, ata66;
         struct ata_port *ap = link->ap;
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
         static const struct pci_bits hpt37x_enable_bits[] = {
@@ -322,18 +374,6 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
         if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
                 return -ENOENT;
 
-        pci_read_config_byte(pdev, 0x5B, &scr2);
-        pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
-        /* Cable register now active */
-        pci_read_config_byte(pdev, 0x5A, &ata66);
-        /* Restore state */
-        pci_write_config_byte(pdev, 0x5B, scr2);
-
-        if (ata66 & (2 >> ap->port_no))
-                ap->cbl = ATA_CBL_PATA40;
-        else
-                ap->cbl = ATA_CBL_PATA80;
-
         /* Reset the state machine */
         pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
         udelay(100);
@@ -347,29 +387,12 @@ static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
                 { 0x50, 1, 0x04, 0x04 },
                 { 0x54, 1, 0x04, 0x04 }
         };
-        u16 mcr3;
-        u8 ata66;
         struct ata_port *ap = link->ap;
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-        unsigned int mcrbase = 0x50 + 4 * ap->port_no;
 
         if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
                 return -ENOENT;
 
-        /* Do the extra channel work */
-        pci_read_config_word(pdev, mcrbase + 2, &mcr3);
-        /* Set bit 15 of 0x52 to enable TCBLID as input
-         */
-        pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000);
-        pci_read_config_byte(pdev, 0x5A, &ata66);
-        /* Reset TCBLID/FCBLID to output */
-        pci_write_config_word(pdev, mcrbase + 2, mcr3);
-
-        if (ata66 & (2 >> ap->port_no))
-                ap->cbl = ATA_CBL_PATA40;
-        else
-                ap->cbl = ATA_CBL_PATA80;
-
         /* Reset the state machine */
         pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
         udelay(100);
@@ -584,6 +607,7 @@ static struct ata_port_operations hpt370_port_ops = {
         .bmdma_stop     = hpt370_bmdma_stop,
 
         .mode_filter    = hpt370_filter,
+        .cable_detect   = hpt37x_cable_detect,
         .set_piomode    = hpt370_set_piomode,
         .set_dmamode    = hpt370_set_dmamode,
         .prereset       = hpt37x_pre_reset,
@@ -608,6 +632,7 @@ static struct ata_port_operations hpt372_port_ops = {
 
         .bmdma_stop     = hpt37x_bmdma_stop,
 
+        .cable_detect   = hpt37x_cable_detect,
         .set_piomode    = hpt372_set_piomode,
         .set_dmamode    = hpt372_set_dmamode,
         .prereset       = hpt37x_pre_reset,
@@ -620,6 +645,7 @@ static struct ata_port_operations hpt372_port_ops = {
 
 static struct ata_port_operations hpt374_fn1_port_ops = {
         .inherits       = &hpt372_port_ops,
+        .cable_detect   = hpt374_fn1_cable_detect,
         .prereset       = hpt374_fn1_pre_reset,
 };