ide: ide_config_drive_speed() bugfixes

* Use ->OUTBSYNC instead of ->OUTB when writing command register
  (needed for scc_pata and pmac host drivers).

* Don't check DRDY bit of the status register on ATAPI devices
  (ATAPI devices are free to ignore DRDY bit).

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 2 insertions, 2 deletions

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index fe2a69fed72b..18cf3a66a1a3 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -828,7 +828,7 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
                 hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
         hwif->OUTB(speed, IDE_NSECTOR_REG);
         hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
-        hwif->OUTB(WIN_SETFEATURES, IDE_COMMAND_REG);
+        hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
         if ((IDE_CONTROL_REG) && (drive->quirk_list == 2))
                 hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
         udelay(1);
@@ -855,7 +855,7 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
          */
         for (i = 0; i < 10; i++) {
                 udelay(1);
-                if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), DRIVE_READY, BUSY_STAT|DRQ_STAT|ERR_STAT)) {
+                if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), drive->ready_stat, BUSY_STAT|DRQ_STAT|ERR_STAT)) {
                         error = 0;
                         break;
                 }