spi: spi_bfin uses portmux for additional busses

Use portmux mechanism to support SPI busses 1 and 2, instead of just the
original bus 0.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 31 insertions, 20 deletions

diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a8311a83ae96..045d3ecf459d 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -209,17 +209,26 @@ static void cs_deactive(struct chip_data *chip)
         write_FLAG(flag);
 }
 
-#define MAX_SPI0_SSEL   7
+#define MAX_SPI_SSEL    7
 
 /* stop controller and re-config current chip*/
 static int restore_state(struct driver_data *drv_data)
 {
         struct chip_data *chip = drv_data->cur_chip;
         int ret = 0;
-        u16 ssel[MAX_SPI0_SSEL] = {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
-                                        P_SPI0_SSEL4, P_SPI0_SSEL5,
-                                        P_SPI0_SSEL6, P_SPI0_SSEL7,};
-
+        u16 ssel[3][MAX_SPI_SSEL] = {
+                {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
+                P_SPI0_SSEL4, P_SPI0_SSEL5,
+                P_SPI0_SSEL6, P_SPI0_SSEL7},
+
+                {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
+                P_SPI1_SSEL4, P_SPI1_SSEL5,
+                P_SPI1_SSEL6, P_SPI1_SSEL7},
+
+                {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
+                P_SPI2_SSEL4, P_SPI2_SSEL5,
+                P_SPI2_SSEL6, P_SPI2_SSEL7},
+        };
         /* Clear status and disable clock */
         write_STAT(BIT_STAT_CLR);
         bfin_spi_disable(drv_data);
@@ -234,9 +243,9 @@ static int restore_state(struct driver_data *drv_data)
                 int i = chip->chip_select_num;
 
                 dev_dbg(&drv_data->pdev->dev, "chip select number is %d\n", i);
-
-                if ((i > 0) && (i <= MAX_SPI0_SSEL))
-                        ret = peripheral_request(ssel[i-1], DRV_NAME);
+                if ((i > 0) && (i <= MAX_SPI_SSEL))
+                        ret = peripheral_request(
+                                ssel[drv_data->master->bus_num][i-1], DRV_NAME);
 
                 chip->chip_select_requested = 1;
         }
@@ -329,7 +338,6 @@ static void u8_reader(struct driver_data *drv_data)
         write_TDBR(0xFFFF);
 
         dummy_read();
-
         while (drv_data->rx < drv_data->rx_end - 1) {
                 while (!(read_STAT() & BIT_STAT_RXS))
                         continue;
@@ -640,7 +648,6 @@ static void pump_transfers(unsigned long data)
         message = drv_data->cur_msg;
         transfer = drv_data->cur_transfer;
         chip = drv_data->cur_chip;
-
         /*
          * if msg is error or done, report it back using complete() callback
          */
@@ -1206,16 +1213,20 @@ static inline int destroy_queue(struct driver_data *drv_data)
         return 0;
 }
 
-static int setup_pin_mux(int action)
+static int setup_pin_mux(int action, int bus_num)
 {
 
-        u16 pin_req[] = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0};
+        u16 pin_req[3][4] = {
+                {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+                {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+                {P_SPI2_SCK, P_SPI2_MISO, P_SPI2_MOSI, 0},
+        };
 
         if (action) {
-                if (peripheral_request_list(pin_req, DRV_NAME))
+                if (peripheral_request_list(pin_req[bus_num], DRV_NAME))
                         return -EFAULT;
         } else {
-                peripheral_free_list(pin_req);
+                peripheral_free_list(pin_req[bus_num]);
         }
 
         return 0;
@@ -1239,11 +1250,6 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev)
                 return -ENOMEM;
         }
 
-        if (setup_pin_mux(1)) {
-                dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
-                goto out_error;
-        }
-
         drv_data = spi_master_get_devdata(master);
         drv_data->master = master;
         drv_data->master_info = platform_info;
@@ -1298,6 +1304,11 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev)
                 goto out_error_queue_alloc;
         }
 
+        if (setup_pin_mux(1, master->bus_num)) {
+                dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+                goto out_error;
+        }
+
         dev_info(dev, "%s, Version %s, regs_base @ 0x%08x\n",
                 DRV_DESC, DRV_VERSION, spi_regs_base);
         return status;
@@ -1340,7 +1351,7 @@ static int __devexit bfin5xx_spi_remove(struct platform_device *pdev)
         /* Disconnect from the SPI framework */
         spi_unregister_master(drv_data->master);
 
-        setup_pin_mux(0);
+        setup_pin_mux(0, drv_data->master->bus_num);
 
         /* Prevent double remove */
         platform_set_drvdata(pdev, NULL);