V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2c

Currently, saa7134 is dependent of ir-kbd-i2c, since it uses a symbol that is
defined there. However, as this symbol is used only on saa7134, there's no
sense on keeping it defined there (or on ir-commons).

So, let's move it to saa7134 and remove one symbol for being exported.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

2 files changed, 78 insertions, 82 deletions

diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 7b65f5e537f8..a30254bed311 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -194,88 +194,6 @@ static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
         return 1;
 }
 
-/* Common (grey or coloured) pinnacle PCTV remote handling
- *
- */
-static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw,
-                            int parity_offset, int marker, int code_modulo)
-{
-        unsigned char b[4];
-        unsigned int start = 0,parity = 0,code = 0;
-
-        /* poll IR chip */
-        if (4 != i2c_master_recv(&ir->c,b,4)) {
-                dprintk(2,"read error\n");
-                return -EIO;
-        }
-
-        for (start = 0; start < ARRAY_SIZE(b); start++) {
-                if (b[start] == marker) {
-                        code=b[(start+parity_offset+1)%4];
-                        parity=b[(start+parity_offset)%4];
-                }
-        }
-
-        /* Empty Request */
-        if (parity==0)
-                return 0;
-
-        /* Repeating... */
-        if (ir->old == parity)
-                return 0;
-
-        ir->old = parity;
-
-        /* drop special codes when a key is held down a long time for the grey controller
-           In this case, the second bit of the code is asserted */
-        if (marker == 0xfe && (code & 0x40))
-                return 0;
-
-        code %= code_modulo;
-
-        *ir_raw = code;
-        *ir_key = code;
-
-        dprintk(1,"Pinnacle PCTV key %02x\n", code);
-
-        return 1;
-}
-
-/* The grey pinnacle PCTV remote
- *
- *  There are one issue with this remote:
- *   - I2c packet does not change when the same key is pressed quickly. The workaround
- *     is to hold down each key for about half a second, so that another code is generated
- *     in the i2c packet, and the function can distinguish key presses.
- *
- * Sylvain Pasche <sylvain.pasche@gmail.com>
- */
-int get_key_pinnacle_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
-{
-
-        return get_key_pinnacle(ir, ir_key, ir_raw, 1, 0xfe, 0xff);
-}
-
-EXPORT_SYMBOL_GPL(get_key_pinnacle_grey);
-
-
-/* The new pinnacle PCTV remote (with the colored buttons)
- *
- * Ricardo Cerqueira <v4l@cerqueira.org>
- */
-int get_key_pinnacle_color(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
-{
-        /* code_modulo parameter (0x88) is used to reduce code value to fit inside IR_KEYTAB_SIZE
-         *
-         * this is the only value that results in 42 unique
-         * codes < 128
-         */
-
-        return get_key_pinnacle(ir, ir_key, ir_raw, 2, 0x80, 0x88);
-}
-
-EXPORT_SYMBOL_GPL(get_key_pinnacle_color);
-
 /* ----------------------------------------------------------------------- */
 
 static void ir_key_poll(struct IR_i2c *ir)
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index e6217fe13339..ad08d13dffdd 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -198,6 +198,84 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
         return 1;
 }
 
+/* Common (grey or coloured) pinnacle PCTV remote handling
+ *
+ */
+static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw,
+                            int parity_offset, int marker, int code_modulo)
+{
+        unsigned char b[4];
+        unsigned int start = 0,parity = 0,code = 0;
+
+        /* poll IR chip */
+        if (4 != i2c_master_recv(&ir->c, b, 4)) {
+                i2cdprintk("read error\n");
+                return -EIO;
+        }
+
+        for (start = 0; start < ARRAY_SIZE(b); start++) {
+                if (b[start] == marker) {
+                        code=b[(start+parity_offset + 1) % 4];
+                        parity=b[(start+parity_offset) % 4];
+                }
+        }
+
+        /* Empty Request */
+        if (parity == 0)
+                return 0;
+
+        /* Repeating... */
+        if (ir->old == parity)
+                return 0;
+
+        ir->old = parity;
+
+        /* drop special codes when a key is held down a long time for the grey controller
+           In this case, the second bit of the code is asserted */
+        if (marker == 0xfe && (code & 0x40))
+                return 0;
+
+        code %= code_modulo;
+
+        *ir_raw = code;
+        *ir_key = code;
+
+        i2cdprintk("Pinnacle PCTV key %02x\n", code);
+
+        return 1;
+}
+
+/* The grey pinnacle PCTV remote
+ *
+ *  There are one issue with this remote:
+ *   - I2c packet does not change when the same key is pressed quickly. The workaround
+ *     is to hold down each key for about half a second, so that another code is generated
+ *     in the i2c packet, and the function can distinguish key presses.
+ *
+ * Sylvain Pasche <sylvain.pasche@gmail.com>
+ */
+static int get_key_pinnacle_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+
+        return get_key_pinnacle(ir, ir_key, ir_raw, 1, 0xfe, 0xff);
+}
+
+
+/* The new pinnacle PCTV remote (with the colored buttons)
+ *
+ * Ricardo Cerqueira <v4l@cerqueira.org>
+ */
+static int get_key_pinnacle_color(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+        /* code_modulo parameter (0x88) is used to reduce code value to fit inside IR_KEYTAB_SIZE
+         *
+         * this is the only value that results in 42 unique
+         * codes < 128
+         */
+
+        return get_key_pinnacle(ir, ir_key, ir_raw, 2, 0x80, 0x88);
+}
+
 void saa7134_input_irq(struct saa7134_dev *dev)
 {
         struct card_ir *ir = dev->remote;