Merge commit 'gcl/gcl-next'

3 files changed, 4 insertions, 5 deletions

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 27443f073bc9..a9a45fcc8544 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = {
         .name = "MPC adapter",
         .id = I2C_HW_MPC107,
         .algo = &mpc_algo,
-        .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .timeout = 1,
 };
 
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 4270eb4a26a1..7c79e94a35ea 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -410,7 +410,7 @@ struct of_modalias_table {
         char *modalias;
 };
 static struct of_modalias_table of_modalias_table[] = {
-        /* Empty for now; add entries as needed */
+        { "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
 };
 
 /**
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 25eda71f4bf4..cdb3d3191719 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -108,13 +108,13 @@ static void mpc52xx_psc_spi_activate_cs(struct spi_device *spi)
          * Because psc->ccr is defined as 16bit register instead of 32bit
          * just set the lower byte of BitClkDiv
          */
-        ccr = in_be16(&psc->ccr);
+        ccr = in_be16((u16 __iomem *)&psc->ccr);
         ccr &= 0xFF00;
         if (cs->speed_hz)
                 ccr |= (MCLK / cs->speed_hz - 1) & 0xFF;
         else /* by default SPI Clk 1MHz */
                 ccr |= (MCLK / 1000000 - 1) & 0xFF;
-        out_be16(&psc->ccr, ccr);
+        out_be16((u16 __iomem *)&psc->ccr, ccr);
         mps->bits_per_word = cs->bits_per_word;
 
         if (mps->activate_cs)
@@ -347,7 +347,7 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
         /* Configure 8bit codec mode as a SPI master and use EOF flags */
         /* SICR_SIM_CODEC8|SICR_GENCLK|SICR_SPI|SICR_MSTR|SICR_USEEOF */
         out_be32(&psc->sicr, 0x0180C800);
-        out_be16(&psc->ccr, 0x070F); /* by default SPI Clk 1MHz */
+        out_be16((u16 __iomem *)&psc->ccr, 0x070F); /* default SPI Clk 1MHz */
 
         /* Set 2ms DTL delay */
         out_8(&psc->ctur, 0x00);