mmc: at91_mci: fix multiblock SDIO transfers

The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte
transfers, but at91_mci driver doesn't use them and handles all SDIO
transfers as ordinary MMC block transfers. This causes problems for
multiple-block SDIO transfers (in particular for 256-bytes blocks).

Fix this situation by checking the opcode for SDIO CMD53 and setting
the transfer type in the AT91_MCI_CMDR register properly.

This patch was tested with libertas SDIO driver: problem with TX
timeouts on big packets was eliminated.

Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
Cc: <stable@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 9 insertions, 4 deletions

diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 591ab540b407..d3e6a962f423 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -69,6 +69,7 @@
 #include <linux/highmem.h>
 
 #include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -493,10 +494,14 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
                 else if (data->flags & MMC_DATA_WRITE)
                         cmdr |= AT91_MCI_TRCMD_START;
 
-                if (data->flags & MMC_DATA_STREAM)
-                        cmdr |= AT91_MCI_TRTYP_STREAM;
-                if (data->blocks > 1)
-                        cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+                if (cmd->opcode == SD_IO_RW_EXTENDED) {
+                        cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK;
+                } else {
+                        if (data->flags & MMC_DATA_STREAM)
+                                cmdr |= AT91_MCI_TRTYP_STREAM;
+                        if (data->blocks > 1)
+                                cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+                }
         }
         else {
                 block_length = 0;