iwl3945: remove obsolete irq handling

3945 hardware does not emit the interrupts CSR_INT_BIT_RF_KILL (rfkill
toggled) and CSR_INT_BIT_CT_KILL (adapter too hot). Hence this part of code
can be removed since iwl3945_irq_tasklet does not handle 4965 hw at all.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 29 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 69fda64c6503..94ea4c236838 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4311,35 +4311,6 @@ static void iwl3945_irq_tasklet(struct iwl3945_priv *priv)
         /* Safely ignore these bits for debug checks below */
         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
 
-        /* HW RF KILL switch toggled (4965 only) */
-        if (inta & CSR_INT_BIT_RF_KILL) {
-                int hw_rf_kill = 0;
-                if (!(iwl3945_read32(priv, CSR_GP_CNTRL) &
-                                CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
-                        hw_rf_kill = 1;
-
-                IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR,
-                                "RF_KILL bit toggled to %s.\n",
-                                hw_rf_kill ? "disable radio" : "enable radio");
-
-                /* Queue restart only if RF_KILL switch was set to "kill"
-                 *   when we loaded driver, and is now set to "enable".
-                 * After we're Alive, RF_KILL gets handled by
-                 *   iwl3945_rx_card_state_notif() */
-                if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
-                        clear_bit(STATUS_RF_KILL_HW, &priv->status);
-                        queue_work(priv->workqueue, &priv->restart);
-                }
-
-                handled |= CSR_INT_BIT_RF_KILL;
-        }
-
-        /* Chip got too hot and stopped itself (4965 only) */
-        if (inta & CSR_INT_BIT_CT_KILL) {
-                IWL_ERROR("Microcode CT kill error detected.\n");
-                handled |= CSR_INT_BIT_CT_KILL;
-        }
-
         /* Error detected by uCode */
         if (inta & CSR_INT_BIT_SW_ERR) {
                 IWL_ERROR("Microcode SW error detected.  Restarting 0x%X.\n",