i2c: imx: Make disable_delay a per-device variable

'disable_delay' was static which is wrong as it is calculated using the per-device
bus speed. This patch turns 'disable_delay' into a per-device variable.

Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 3 insertions, 4 deletions

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 433d3486de04..0b486a63460d 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -86,8 +86,6 @@
 /** Variables ******************************************************************
 *******************************************************************************/
 
-static unsigned int disable_delay;      /* Dummy delay */
-
 /*
  * sorted list of clock divider, register value pairs
  * taken from table 26-5, p.26-9, Freescale i.MX
@@ -121,6 +119,7 @@ struct imx_i2c_struct {
         int                     irq;
         wait_queue_head_t       queue;
         unsigned long           i2csr;
+        unsigned int            disable_delay;
 };
 
 /** Functions for IMX I2C adapter driver ***************************************
@@ -212,7 +211,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
          * This delay caused by an i.MXL hardware bug.
          * If no (or too short) delay, no "STOP" bit will be generated.
          */
-        udelay(disable_delay);
+        udelay(i2c_imx->disable_delay);
         /* Disable I2C controller */
         writeb(0, i2c_imx->base + IMX_I2C_I2CR);
 }
@@ -243,7 +242,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
          * This delay is used in I2C bus disable function
          * to fix chip hardware bug.
          */
-        disable_delay = (500000U * i2c_clk_div[i][0]
+        i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0]
                 + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
 
         /* dev_dbg() can't be used, because adapter is not yet registered */