Merge branch 'x86/mm' into core/percpu

Conflicts:
	arch/x86/mm/fault.c

171 files changed, 5116 insertions, 1663 deletions

diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index d80f4cc2e0da..65d90c720b5a 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -19,7 +19,7 @@ obj-y				+= osl.o utils.o reboot.o\
 
 # sleep related files
 obj-y                           += wakeup.o
-obj-y                           += main.o
+obj-y                           += sleep.o
 obj-$(CONFIG_ACPI_SLEEP)        += proc.o
 
 
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 8dfcbb8aff73..a2b82c90a683 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -120,31 +120,6 @@ static struct acpi_ec {
         spinlock_t curr_lock;
 } *boot_ec, *first_ec;
 
-/* 
- * Some Asus system have exchanged ECDT data/command IO addresses.
- */
-static int print_ecdt_error(const struct dmi_system_id *id)
-{
-        printk(KERN_NOTICE PREFIX "%s detected - "
-                "ECDT has exchanged control/data I/O address\n",
-                id->ident);
-        return 0;
-}
-
-static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
-        {
-        print_ecdt_error, "Asus L4R", {
-        DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
-        DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
-        DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
-        {
-        print_ecdt_error, "Asus M6R", {
-        DMI_MATCH(DMI_BIOS_VERSION, "0207"),
-        DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
-        DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
-        {},
-};
-
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
@@ -983,8 +958,8 @@ static const struct acpi_device_id ec_device_ids[] = {
 int __init acpi_ec_ecdt_probe(void)
 {
         acpi_status status;
+        struct acpi_ec *saved_ec = NULL;
         struct acpi_table_ecdt *ecdt_ptr;
-        acpi_handle dummy;
 
         boot_ec = make_acpi_ec();
         if (!boot_ec)
@@ -998,21 +973,16 @@ int __init acpi_ec_ecdt_probe(void)
                 pr_info(PREFIX "EC description table is found, configuring boot EC\n");
                 boot_ec->command_addr = ecdt_ptr->control.address;
                 boot_ec->data_addr = ecdt_ptr->data.address;
-                if (dmi_check_system(ec_dmi_table)) {
-                        /*
-                         * If the board falls into ec_dmi_table, it means
-                         * that ECDT table gives the incorrect command/status
-                         * & data I/O address. Just fix it.
-                         */
-                        boot_ec->data_addr = ecdt_ptr->control.address;
-                        boot_ec->command_addr = ecdt_ptr->data.address;
-                }
                 boot_ec->gpe = ecdt_ptr->gpe;
                 boot_ec->handle = ACPI_ROOT_OBJECT;
                 acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
-                /* Add some basic check against completely broken table */
-                if (boot_ec->data_addr != boot_ec->command_addr)
+                /* Don't trust ECDT, which comes from ASUSTek */
+                if (!dmi_name_in_vendors("ASUS"))
                         goto install;
+                saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+                if (!saved_ec)
+                        return -ENOMEM;
+                memcpy(&saved_ec, boot_ec, sizeof(saved_ec));
         /* fall through */
         }
         /* This workaround is needed only on some broken machines,
@@ -1023,12 +993,29 @@ int __init acpi_ec_ecdt_probe(void)
         /* Check that acpi_get_devices actually find something */
         if (ACPI_FAILURE(status) || !boot_ec->handle)
                 goto error;
-        /* We really need to limit this workaround, the only ASUS,
-         * which needs it, has fake EC._INI method, so use it as flag.
-         * Keep boot_ec struct as it will be needed soon.
-         */
-        if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &dummy)))
-                return -ENODEV;
+        if (saved_ec) {
+                /* try to find good ECDT from ASUSTek */
+                if (saved_ec->command_addr != boot_ec->command_addr ||
+                    saved_ec->data_addr != boot_ec->data_addr ||
+                    saved_ec->gpe != boot_ec->gpe ||
+                    saved_ec->handle != boot_ec->handle)
+                        pr_info(PREFIX "ASUSTek keeps feeding us with broken "
+                        "ECDT tables, which are very hard to workaround. "
+                        "Trying to use DSDT EC info instead. Please send "
+                        "output of acpidump to linux-acpi@vger.kernel.org\n");
+                kfree(saved_ec);
+                saved_ec = NULL;
+        } else {
+                /* We really need to limit this workaround, the only ASUS,
+                * which needs it, has fake EC._INI method, so use it as flag.
+                * Keep boot_ec struct as it will be needed soon.
+                */
+                acpi_handle dummy;
+                if (!dmi_name_in_vendors("ASUS") ||
+                    ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI",
+                                                        &dummy)))
+                        return -ENODEV;
+        }
 install:
         if (!ec_install_handlers(boot_ec)) {
                 first_ec = boot_ec;
diff --git a/drivers/acpi/main.c b/drivers/acpi/sleep.c
index 7e3c609cbef2..7e3c609cbef2 100644
--- a/drivers/acpi/main.c
+++ b/drivers/acpi/sleep.c
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 073ff09218a9..99e6f1f8ea45 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -416,7 +416,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
         }
 
         /* Passive (optional) */
-        if (flag & ACPI_TRIPS_PASSIVE) {
+        if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
+                (flag == ACPI_TRIPS_INIT)) {
                 valid = tz->trips.passive.flags.valid;
                 if (psv == -1) {
                         status = AE_SUPPORT;
@@ -462,8 +463,11 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
                 memset(&devices, 0, sizeof(struct acpi_handle_list));
                 status = acpi_evaluate_reference(tz->device->handle, "_PSL",
                                                         NULL, &devices);
-                if (ACPI_FAILURE(status))
+                if (ACPI_FAILURE(status)) {
+                        printk(KERN_WARNING PREFIX
+                                "Invalid passive threshold\n");
                         tz->trips.passive.flags.valid = 0;
+                }
                 else
                         tz->trips.passive.flags.valid = 1;
 
@@ -487,7 +491,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
                 if (act == -1)
                         break; /* disable all active trip points */
 
-                if (flag & ACPI_TRIPS_ACTIVE) {
+                if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
+                        tz->trips.active[i].flags.valid)) {
                         status = acpi_evaluate_integer(tz->device->handle,
                                                         name, NULL, &tmp);
                         if (ACPI_FAILURE(status)) {
@@ -521,8 +526,11 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
                         memset(&devices, 0, sizeof(struct acpi_handle_list));
                         status = acpi_evaluate_reference(tz->device->handle,
                                                 name, NULL, &devices);
-                        if (ACPI_FAILURE(status))
+                        if (ACPI_FAILURE(status)) {
+                                printk(KERN_WARNING PREFIX
+                                        "Invalid active%d threshold\n", i);
                                 tz->trips.active[i].flags.valid = 0;
+                        }
                         else
                                 tz->trips.active[i].flags.valid = 1;
 
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 1a7be96d627b..503a908afc80 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -698,6 +698,15 @@ config PATA_IXP4XX_CF
 
           If unsure, say N.
 
+config PATA_OCTEON_CF
+        tristate "OCTEON Boot Bus Compact Flash support"
+        depends on CPU_CAVIUM_OCTEON
+        help
+          This option enables a polled compact flash driver for use with
+          compact flash cards attached to the OCTEON boot bus.
+
+          If unsure, say N.
+
 config PATA_SCC
         tristate "Toshiba's Cell Reference Set IDE support"
         depends on PCI && PPC_CELLEB
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 674965fa326d..7f1ecf99528c 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
 obj-$(CONFIG_PATA_SCC)          += pata_scc.o
 obj-$(CONFIG_PATA_SCH)          += pata_sch.o
 obj-$(CONFIG_PATA_BF54X)        += pata_bf54x.o
+obj-$(CONFIG_PATA_OCTEON_CF)    += pata_octeon_cf.o
 obj-$(CONFIG_PATA_PLATFORM)     += pata_platform.o
 obj-$(CONFIG_PATA_OF_PLATFORM)  += pata_of_platform.o
 obj-$(CONFIG_PATA_ICSIDE)       += pata_icside.o
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 71218d76d75e..88c242856dae 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3029,33 +3029,33 @@ int sata_set_spd(struct ata_link *link)
  */
 
 static const struct ata_timing ata_timing[] = {
-/*      { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960,   0 }, */
-        { XFER_PIO_0,     70, 290, 240, 600, 165, 150, 600,   0 },
-        { XFER_PIO_1,     50, 290,  93, 383, 125, 100, 383,   0 },
-        { XFER_PIO_2,     30, 290,  40, 330, 100,  90, 240,   0 },
-        { XFER_PIO_3,     30,  80,  70, 180,  80,  70, 180,   0 },
-        { XFER_PIO_4,     25,  70,  25, 120,  70,  25, 120,   0 },
-        { XFER_PIO_5,     15,  65,  25, 100,  65,  25, 100,   0 },
-        { XFER_PIO_6,     10,  55,  20,  80,  55,  20,  80,   0 },
-
-        { XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 960,   0 },
-        { XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 480,   0 },
-        { XFER_SW_DMA_2,  60,   0,   0,   0, 120, 120, 240,   0 },
-
-        { XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 480,   0 },
-        { XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 150,   0 },
-        { XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 120,   0 },
-        { XFER_MW_DMA_3,  25,   0,   0,   0,  65,  25, 100,   0 },
-        { XFER_MW_DMA_4,  25,   0,   0,   0,  55,  20,  80,   0 },
-
-/*      { XFER_UDMA_SLOW,  0,   0,   0,   0,   0,   0,   0, 150 }, */
-        { XFER_UDMA_0,     0,   0,   0,   0,   0,   0,   0, 120 },
-        { XFER_UDMA_1,     0,   0,   0,   0,   0,   0,   0,  80 },
-        { XFER_UDMA_2,     0,   0,   0,   0,   0,   0,   0,  60 },
-        { XFER_UDMA_3,     0,   0,   0,   0,   0,   0,   0,  45 },
-        { XFER_UDMA_4,     0,   0,   0,   0,   0,   0,   0,  30 },
-        { XFER_UDMA_5,     0,   0,   0,   0,   0,   0,   0,  20 },
-        { XFER_UDMA_6,     0,   0,   0,   0,   0,   0,   0,  15 },
+/*      { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0,  960,   0 }, */
+        { XFER_PIO_0,     70, 290, 240, 600, 165, 150, 0,  600,   0 },
+        { XFER_PIO_1,     50, 290,  93, 383, 125, 100, 0,  383,   0 },
+        { XFER_PIO_2,     30, 290,  40, 330, 100,  90, 0,  240,   0 },
+        { XFER_PIO_3,     30,  80,  70, 180,  80,  70, 0,  180,   0 },
+        { XFER_PIO_4,     25,  70,  25, 120,  70,  25, 0,  120,   0 },
+        { XFER_PIO_5,     15,  65,  25, 100,  65,  25, 0,  100,   0 },
+        { XFER_PIO_6,     10,  55,  20,  80,  55,  20, 0,   80,   0 },
+
+        { XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 50, 960,   0 },
+        { XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 30, 480,   0 },
+        { XFER_SW_DMA_2,  60,   0,   0,   0, 120, 120, 20, 240,   0 },
+
+        { XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 20, 480,   0 },
+        { XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 5,  150,   0 },
+        { XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 5,  120,   0 },
+        { XFER_MW_DMA_3,  25,   0,   0,   0,  65,  25, 5,  100,   0 },
+        { XFER_MW_DMA_4,  25,   0,   0,   0,  55,  20, 5,   80,   0 },
+
+/*      { XFER_UDMA_SLOW,  0,   0,   0,   0,   0,   0, 0,    0, 150 }, */
+        { XFER_UDMA_0,     0,   0,   0,   0,   0,   0, 0,    0, 120 },
+        { XFER_UDMA_1,     0,   0,   0,   0,   0,   0, 0,    0,  80 },
+        { XFER_UDMA_2,     0,   0,   0,   0,   0,   0, 0,    0,  60 },
+        { XFER_UDMA_3,     0,   0,   0,   0,   0,   0, 0,    0,  45 },
+        { XFER_UDMA_4,     0,   0,   0,   0,   0,   0, 0,    0,  30 },
+        { XFER_UDMA_5,     0,   0,   0,   0,   0,   0, 0,    0,  20 },
+        { XFER_UDMA_6,     0,   0,   0,   0,   0,   0, 0,    0,  15 },
 
         { 0xFF }
 };
@@ -3065,14 +3065,15 @@ static const struct ata_timing ata_timing[] = {
 
 static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
 {
-        q->setup   = EZ(t->setup   * 1000,  T);
-        q->act8b   = EZ(t->act8b   * 1000,  T);
-        q->rec8b   = EZ(t->rec8b   * 1000,  T);
-        q->cyc8b   = EZ(t->cyc8b   * 1000,  T);
-        q->active  = EZ(t->active  * 1000,  T);
-        q->recover = EZ(t->recover * 1000,  T);
-        q->cycle   = EZ(t->cycle   * 1000,  T);
-        q->udma    = EZ(t->udma    * 1000, UT);
+        q->setup        = EZ(t->setup      * 1000,  T);
+        q->act8b        = EZ(t->act8b      * 1000,  T);
+        q->rec8b        = EZ(t->rec8b      * 1000,  T);
+        q->cyc8b        = EZ(t->cyc8b      * 1000,  T);
+        q->active       = EZ(t->active     * 1000,  T);
+        q->recover      = EZ(t->recover    * 1000,  T);
+        q->dmack_hold   = EZ(t->dmack_hold * 1000,  T);
+        q->cycle        = EZ(t->cycle      * 1000,  T);
+        q->udma         = EZ(t->udma       * 1000, UT);
 }
 
 void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
@@ -3084,6 +3085,7 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
         if (what & ATA_TIMING_CYC8B  ) m->cyc8b   = max(a->cyc8b,   b->cyc8b);
         if (what & ATA_TIMING_ACTIVE ) m->active  = max(a->active,  b->active);
         if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+        if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
         if (what & ATA_TIMING_CYCLE  ) m->cycle   = max(a->cycle,   b->cycle);
         if (what & ATA_TIMING_UDMA   ) m->udma    = max(a->udma,    b->udma);
 }
@@ -6638,7 +6640,6 @@ EXPORT_SYMBOL_GPL(ata_dev_pair);
 EXPORT_SYMBOL_GPL(ata_port_disable);
 EXPORT_SYMBOL_GPL(ata_ratelimit);
 EXPORT_SYMBOL_GPL(ata_wait_register);
-EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
 EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
 EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 9e92107691f2..a1a6e6298c33 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -423,9 +423,9 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
  *      RETURNS:
  *      Zero on success, negative errno on error.
  */
-static int ata_get_identity(struct scsi_device *sdev, void __user *arg)
+static int ata_get_identity(struct ata_port *ap, struct scsi_device *sdev,
+                            void __user *arg)
 {
-        struct ata_port *ap = ata_shost_to_port(sdev->host);
         struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
         u16 __user *dst = arg;
         char buf[40];
@@ -645,7 +645,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
         return rc;
 }
 
-int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
+int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
+                     int cmd, void __user *arg)
 {
         int val = -EINVAL, rc = -EINVAL;
 
@@ -663,7 +664,7 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
                 return 0;
 
         case HDIO_GET_IDENTITY:
-                return ata_get_identity(scsidev, arg);
+                return ata_get_identity(ap, scsidev, arg);
 
         case HDIO_DRIVE_CMD:
                 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
@@ -682,6 +683,14 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
 
         return rc;
 }
+EXPORT_SYMBOL_GPL(ata_sas_scsi_ioctl);
+
+int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
+{
+        return ata_sas_scsi_ioctl(ata_shost_to_port(scsidev->host),
+                                scsidev, cmd, arg);
+}
+EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
 
 /**
  *      ata_scsi_qc_new - acquire new ata_queued_cmd reference
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index a7999c19f0c9..eb99dbe78081 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -41,7 +41,7 @@ static int ali_atapi_dma = 0;
 module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
 MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
 
-static struct pci_dev *isa_bridge;
+static struct pci_dev *ali_isa_bridge;
 
 /*
  *      Cable special cases
@@ -346,13 +346,13 @@ static void ali_c2_c3_postreset(struct ata_link *link, unsigned int *classes)
         int port_bit = 4 << link->ap->port_no;
 
         /* If our bridge is an ALI 1533 then do the extra work */
-        if (isa_bridge) {
+        if (ali_isa_bridge) {
                 /* Tristate and re-enable the bus signals */
-                pci_read_config_byte(isa_bridge, 0x58, &r);
+                pci_read_config_byte(ali_isa_bridge, 0x58, &r);
                 r &= ~port_bit;
-                pci_write_config_byte(isa_bridge, 0x58, r);
+                pci_write_config_byte(ali_isa_bridge, 0x58, r);
                 r |= port_bit;
-                pci_write_config_byte(isa_bridge, 0x58, r);
+                pci_write_config_byte(ali_isa_bridge, 0x58, r);
         }
         ata_sff_postreset(link, classes);
 }
@@ -467,14 +467,14 @@ static void ali_init_chipset(struct pci_dev *pdev)
                 pci_write_config_byte(pdev, 0x53, tmp);
         }
         north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
-        if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+        if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) {
                 /* Configure the ALi bridge logic. For non ALi rely on BIOS.
                    Set the south bridge enable bit */
-                pci_read_config_byte(isa_bridge, 0x79, &tmp);
+                pci_read_config_byte(ali_isa_bridge, 0x79, &tmp);
                 if (pdev->revision == 0xC2)
-                        pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+                        pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x04);
                 else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
-                        pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+                        pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x02);
         }
         pci_dev_put(north);
         ata_pci_bmdma_clear_simplex(pdev);
@@ -571,9 +571,9 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
         ali_init_chipset(pdev);
 
-        if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
+        if (ali_isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
                 /* Are we paired with a UDMA capable chip */
-                pci_read_config_byte(isa_bridge, 0x5E, &tmp);
+                pci_read_config_byte(ali_isa_bridge, 0x5E, &tmp);
                 if ((tmp & 0x1E) == 0x12)
                         ppi[0] = &info_20_udma;
         }
@@ -617,11 +617,11 @@ static struct pci_driver ali_pci_driver = {
 static int __init ali_init(void)
 {
         int ret;
-        isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+        ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
 
         ret = pci_register_driver(&ali_pci_driver);
         if (ret < 0)
-                pci_dev_put(isa_bridge);
+                pci_dev_put(ali_isa_bridge);
         return ret;
 }
 
@@ -629,7 +629,7 @@ static int __init ali_init(void)
 static void __exit ali_exit(void)
 {
         pci_unregister_driver(&ali_pci_driver);
-        pci_dev_put(isa_bridge);
+        pci_dev_put(ali_isa_bridge);
 }
 
 
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 0e2cde8f9973..506adde8ebb3 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -32,21 +32,6 @@ enum {
         ATIIXP_IDE_UDMA_MODE    = 0x56
 };
 
-static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline)
-{
-        struct ata_port *ap = link->ap;
-        static const struct pci_bits atiixp_enable_bits[] = {
-                { 0x48, 1, 0x01, 0x00 },
-                { 0x48, 1, 0x08, 0x00 }
-        };
-        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-        if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
-                return -ENOENT;
-
-        return ata_sff_prereset(link, deadline);
-}
-
 static int atiixp_cable_detect(struct ata_port *ap)
 {
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -229,10 +214,9 @@ static struct ata_port_operations atiixp_port_ops = {
         .cable_detect   = atiixp_cable_detect,
         .set_piomode    = atiixp_set_piomode,
         .set_dmamode    = atiixp_set_dmamode,
-        .prereset       = atiixp_pre_reset,
 };
 
-static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
         static const struct ata_port_info info = {
                 .flags = ATA_FLAG_SLAVE_POSS,
@@ -241,8 +225,18 @@ static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 .udma_mask = 0x3F,
                 .port_ops = &atiixp_port_ops
         };
-        const struct ata_port_info *ppi[] = { &info, NULL };
-        return ata_pci_sff_init_one(dev, ppi, &atiixp_sht, NULL);
+        static const struct pci_bits atiixp_enable_bits[] = {
+                { 0x48, 1, 0x01, 0x00 },
+                { 0x48, 1, 0x08, 0x00 }
+        };
+        const struct ata_port_info *ppi[] = { &info, &info };
+        int i;
+
+        for (i = 0; i < 2; i++)
+                if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
+                        ppi[i] = &ata_dummy_port_info;
+
+        return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL);
 }
 
 static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
new file mode 100644
index 000000000000..0fe4ef309c62
--- /dev/null
+++ b/drivers/ata/pata_octeon_cf.c
@@ -0,0 +1,965 @@
+/*
+ * Driver for the Octeon bootbus compact flash.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 - 2009 Cavium Networks
+ * Copyright (C) 2008 Wind River Systems
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+
+#include <asm/octeon/octeon.h>
+
+/*
+ * The Octeon bootbus compact flash interface is connected in at least
+ * 3 different configurations on various evaluation boards:
+ *
+ * -- 8  bits no irq, no DMA
+ * -- 16 bits no irq, no DMA
+ * -- 16 bits True IDE mode with DMA, but no irq.
+ *
+ * In the last case the DMA engine can generate an interrupt when the
+ * transfer is complete.  For the first two cases only PIO is supported.
+ *
+ */
+
+#define DRV_NAME        "pata_octeon_cf"
+#define DRV_VERSION     "2.1"
+
+
+struct octeon_cf_port {
+        struct workqueue_struct *wq;
+        struct delayed_work delayed_finish;
+        struct ata_port *ap;
+        int dma_finished;
+};
+
+static struct scsi_host_template octeon_cf_sht = {
+        ATA_PIO_SHT(DRV_NAME),
+};
+
+/**
+ * Convert nanosecond based time to setting used in the
+ * boot bus timing register, based on timing multiple
+ */
+static unsigned int ns_to_tim_reg(unsigned int tim_mult, unsigned int nsecs)
+{
+        unsigned int val;
+
+        /*
+         * Compute # of eclock periods to get desired duration in
+         * nanoseconds.
+         */
+        val = DIV_ROUND_UP(nsecs * (octeon_get_clock_rate() / 1000000),
+                          1000 * tim_mult);
+
+        return val;
+}
+
+static void octeon_cf_set_boot_reg_cfg(int cs)
+{
+        union cvmx_mio_boot_reg_cfgx reg_cfg;
+        reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs));
+        reg_cfg.s.dmack = 0;    /* Don't assert DMACK on access */
+        reg_cfg.s.tim_mult = 2; /* Timing mutiplier 2x */
+        reg_cfg.s.rd_dly = 0;   /* Sample on falling edge of BOOT_OE */
+        reg_cfg.s.sam = 0;      /* Don't combine write and output enable */
+        reg_cfg.s.we_ext = 0;   /* No write enable extension */
+        reg_cfg.s.oe_ext = 0;   /* No read enable extension */
+        reg_cfg.s.en = 1;       /* Enable this region */
+        reg_cfg.s.orbit = 0;    /* Don't combine with previous region */
+        reg_cfg.s.ale = 0;      /* Don't do address multiplexing */
+        cvmx_write_csr(CVMX_MIO_BOOT_REG_CFGX(cs), reg_cfg.u64);
+}
+
+/**
+ * Called after libata determines the needed PIO mode. This
+ * function programs the Octeon bootbus regions to support the
+ * timing requirements of the PIO mode.
+ *
+ * @ap:     ATA port information
+ * @dev:    ATA device
+ */
+static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev)
+{
+        struct octeon_cf_data *ocd = ap->dev->platform_data;
+        union cvmx_mio_boot_reg_timx reg_tim;
+        int cs = ocd->base_region;
+        int T;
+        struct ata_timing timing;
+
+        int use_iordy;
+        int trh;
+        int pause;
+        /* These names are timing parameters from the ATA spec */
+        int t1;
+        int t2;
+        int t2i;
+
+        T = (int)(2000000000000LL / octeon_get_clock_rate());
+
+        if (ata_timing_compute(dev, dev->pio_mode, &timing, T, T))
+                BUG();
+
+        t1 = timing.setup;
+        if (t1)
+                t1--;
+        t2 = timing.active;
+        if (t2)
+                t2--;
+        t2i = timing.act8b;
+        if (t2i)
+                t2i--;
+
+        trh = ns_to_tim_reg(2, 20);
+        if (trh)
+                trh--;
+
+        pause = timing.cycle - timing.active - timing.setup - trh;
+        if (pause)
+                pause--;
+
+        octeon_cf_set_boot_reg_cfg(cs);
+        if (ocd->dma_engine >= 0)
+                /* True IDE mode, program both chip selects.  */
+                octeon_cf_set_boot_reg_cfg(cs + 1);
+
+
+        use_iordy = ata_pio_need_iordy(dev);
+
+        reg_tim.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_TIMX(cs));
+        /* Disable page mode */
+        reg_tim.s.pagem = 0;
+        /* Enable dynamic timing */
+        reg_tim.s.waitm = use_iordy;
+        /* Pages are disabled */
+        reg_tim.s.pages = 0;
+        /* We don't use multiplexed address mode */
+        reg_tim.s.ale = 0;
+        /* Not used */
+        reg_tim.s.page = 0;
+        /* Time after IORDY to coninue to assert the data */
+        reg_tim.s.wait = 0;
+        /* Time to wait to complete the cycle. */
+        reg_tim.s.pause = pause;
+        /* How long to hold after a write to de-assert CE. */
+        reg_tim.s.wr_hld = trh;
+        /* How long to wait after a read to de-assert CE. */
+        reg_tim.s.rd_hld = trh;
+        /* How long write enable is asserted */
+        reg_tim.s.we = t2;
+        /* How long read enable is asserted */
+        reg_tim.s.oe = t2;
+        /* Time after CE that read/write starts */
+        reg_tim.s.ce = ns_to_tim_reg(2, 5);
+        /* Time before CE that address is valid */
+        reg_tim.s.adr = 0;
+
+        /* Program the bootbus region timing for the data port chip select. */
+        cvmx_write_csr(CVMX_MIO_BOOT_REG_TIMX(cs), reg_tim.u64);
+        if (ocd->dma_engine >= 0)
+                /* True IDE mode, program both chip selects.  */
+                cvmx_write_csr(CVMX_MIO_BOOT_REG_TIMX(cs + 1), reg_tim.u64);
+}
+
+static void octeon_cf_set_dmamode(struct ata_port *ap, struct ata_device *dev)
+{
+        struct octeon_cf_data *ocd = dev->link->ap->dev->platform_data;
+        union cvmx_mio_boot_dma_timx dma_tim;
+        unsigned int oe_a;
+        unsigned int oe_n;
+        unsigned int dma_ackh;
+        unsigned int dma_arq;
+        unsigned int pause;
+        unsigned int T0, Tkr, Td;
+        unsigned int tim_mult;
+
+        const struct ata_timing *timing;
+
+        timing = ata_timing_find_mode(dev->dma_mode);
+        T0      = timing->cycle;
+        Td      = timing->active;
+        Tkr     = timing->recover;
+        dma_ackh = timing->dmack_hold;
+
+        dma_tim.u64 = 0;
+        /* dma_tim.s.tim_mult = 0 --> 4x */
+        tim_mult = 4;
+
+        /* not spec'ed, value in eclocks, not affected by tim_mult */
+        dma_arq = 8;
+        pause = 25 - dma_arq * 1000 /
+                (octeon_get_clock_rate() / 1000000); /* Tz */
+
+        oe_a = Td;
+        /* Tkr from cf spec, lengthened to meet T0 */
+        oe_n = max(T0 - oe_a, Tkr);
+
+        dma_tim.s.dmack_pi = 1;
+
+        dma_tim.s.oe_n = ns_to_tim_reg(tim_mult, oe_n);
+        dma_tim.s.oe_a = ns_to_tim_reg(tim_mult, oe_a);
+
+        /*
+         * This is tI, C.F. spec. says 0, but Sony CF card requires
+         * more, we use 20 nS.
+         */
+        dma_tim.s.dmack_s = ns_to_tim_reg(tim_mult, 20);;
+        dma_tim.s.dmack_h = ns_to_tim_reg(tim_mult, dma_ackh);
+
+        dma_tim.s.dmarq = dma_arq;
+        dma_tim.s.pause = ns_to_tim_reg(tim_mult, pause);
+
+        dma_tim.s.rd_dly = 0;   /* Sample right on edge */
+
+        /*  writes only */
+        dma_tim.s.we_n = ns_to_tim_reg(tim_mult, oe_n);
+        dma_tim.s.we_a = ns_to_tim_reg(tim_mult, oe_a);
+
+        pr_debug("ns to ticks (mult %d) of %d is: %d\n", tim_mult, 60,
+                 ns_to_tim_reg(tim_mult, 60));
+        pr_debug("oe_n: %d, oe_a: %d, dmack_s: %d, dmack_h: "
+                 "%d, dmarq: %d, pause: %d\n",
+                 dma_tim.s.oe_n, dma_tim.s.oe_a, dma_tim.s.dmack_s,
+                 dma_tim.s.dmack_h, dma_tim.s.dmarq, dma_tim.s.pause);
+
+        cvmx_write_csr(CVMX_MIO_BOOT_DMA_TIMX(ocd->dma_engine),
+                       dma_tim.u64);
+
+}
+
+/**
+ * Handle an 8 bit I/O request.
+ *
+ * @dev:        Device to access
+ * @buffer:     Data buffer
+ * @buflen:     Length of the buffer.
+ * @rw:         True to write.
+ */
+static unsigned int octeon_cf_data_xfer8(struct ata_device *dev,
+                                         unsigned char *buffer,
+                                         unsigned int buflen,
+                                         int rw)
+{
+        struct ata_port *ap             = dev->link->ap;
+        void __iomem *data_addr         = ap->ioaddr.data_addr;
+        unsigned long words;
+        int count;
+
+        words = buflen;
+        if (rw) {
+                count = 16;
+                while (words--) {
+                        iowrite8(*buffer, data_addr);
+                        buffer++;
+                        /*
+                         * Every 16 writes do a read so the bootbus
+                         * FIFO doesn't fill up.
+                         */
+                        if (--count == 0) {
+                                ioread8(ap->ioaddr.altstatus_addr);
+                                count = 16;
+                        }
+                }
+        } else {
+                ioread8_rep(data_addr, buffer, words);
+        }
+        return buflen;
+}
+
+/**
+ * Handle a 16 bit I/O request.
+ *
+ * @dev:        Device to access
+ * @buffer:     Data buffer
+ * @buflen:     Length of the buffer.
+ * @rw:         True to write.
+ */
+static unsigned int octeon_cf_data_xfer16(struct ata_device *dev,
+                                          unsigned char *buffer,
+                                          unsigned int buflen,
+                                          int rw)
+{
+        struct ata_port *ap             = dev->link->ap;
+        void __iomem *data_addr         = ap->ioaddr.data_addr;
+        unsigned long words;
+        int count;
+
+        words = buflen / 2;
+        if (rw) {
+                count = 16;
+                while (words--) {
+                        iowrite16(*(uint16_t *)buffer, data_addr);
+                        buffer += sizeof(uint16_t);
+                        /*
+                         * Every 16 writes do a read so the bootbus
+                         * FIFO doesn't fill up.
+                         */
+                        if (--count == 0) {
+                                ioread8(ap->ioaddr.altstatus_addr);
+                                count = 16;
+                        }
+                }
+        } else {
+                while (words--) {
+                        *(uint16_t *)buffer = ioread16(data_addr);
+                        buffer += sizeof(uint16_t);
+                }
+        }
+        /* Transfer trailing 1 byte, if any. */
+        if (unlikely(buflen & 0x01)) {
+                __le16 align_buf[1] = { 0 };
+
+                if (rw == READ) {
+                        align_buf[0] = cpu_to_le16(ioread16(data_addr));
+                        memcpy(buffer, align_buf, 1);
+                } else {
+                        memcpy(align_buf, buffer, 1);
+                        iowrite16(le16_to_cpu(align_buf[0]), data_addr);
+                }
+                words++;
+        }
+        return buflen;
+}
+
+/**
+ * Read the taskfile for 16bit non-True IDE only.
+ */
+static void octeon_cf_tf_read16(struct ata_port *ap, struct ata_taskfile *tf)
+{
+        u16 blob;
+        /* The base of the registers is at ioaddr.data_addr. */
+        void __iomem *base = ap->ioaddr.data_addr;
+
+        blob = __raw_readw(base + 0xc);
+        tf->feature = blob >> 8;
+
+        blob = __raw_readw(base + 2);
+        tf->nsect = blob & 0xff;
+        tf->lbal = blob >> 8;
+
+        blob = __raw_readw(base + 4);
+        tf->lbam = blob & 0xff;
+        tf->lbah = blob >> 8;
+
+        blob = __raw_readw(base + 6);
+        tf->device = blob & 0xff;
+        tf->command = blob >> 8;
+
+        if (tf->flags & ATA_TFLAG_LBA48) {
+                if (likely(ap->ioaddr.ctl_addr)) {
+                        iowrite8(tf->ctl | ATA_HOB, ap->ioaddr.ctl_addr);
+
+                        blob = __raw_readw(base + 0xc);
+                        tf->hob_feature = blob >> 8;
+
+                        blob = __raw_readw(base + 2);
+                        tf->hob_nsect = blob & 0xff;
+                        tf->hob_lbal = blob >> 8;
+
+                        blob = __raw_readw(base + 4);
+                        tf->hob_lbam = blob & 0xff;
+                        tf->hob_lbah = blob >> 8;
+
+                        iowrite8(tf->ctl, ap->ioaddr.ctl_addr);
+                        ap->last_ctl = tf->ctl;
+                } else {
+                        WARN_ON(1);
+                }
+        }
+}
+
+static u8 octeon_cf_check_status16(struct ata_port *ap)
+{
+        u16 blob;
+        void __iomem *base = ap->ioaddr.data_addr;
+
+        blob = __raw_readw(base + 6);
+        return blob >> 8;
+}
+
+static int octeon_cf_softreset16(struct ata_link *link, unsigned int *classes,
+                                 unsigned long deadline)
+{
+        struct ata_port *ap = link->ap;
+        void __iomem *base = ap->ioaddr.data_addr;
+        int rc;
+        u8 err;
+
+        DPRINTK("about to softreset\n");
+        __raw_writew(ap->ctl, base + 0xe);
+        udelay(20);
+        __raw_writew(ap->ctl | ATA_SRST, base + 0xe);
+        udelay(20);
+        __raw_writew(ap->ctl, base + 0xe);
+
+        rc = ata_sff_wait_after_reset(link, 1, deadline);
+        if (rc) {
+                ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+                return rc;
+        }
+
+        /* determine by signature whether we have ATA or ATAPI devices */
+        classes[0] = ata_sff_dev_classify(&link->device[0], 1, &err);
+        DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+        return 0;
+}
+
+/**
+ * Load the taskfile for 16bit non-True IDE only.  The device_addr is
+ * not loaded, we do this as part of octeon_cf_exec_command16.
+ */
+static void octeon_cf_tf_load16(struct ata_port *ap,
+                                const struct ata_taskfile *tf)
+{
+        unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+        /* The base of the registers is at ioaddr.data_addr. */
+        void __iomem *base = ap->ioaddr.data_addr;
+
+        if (tf->ctl != ap->last_ctl) {
+                iowrite8(tf->ctl, ap->ioaddr.ctl_addr);
+                ap->last_ctl = tf->ctl;
+                ata_wait_idle(ap);
+        }
+        if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+                __raw_writew(tf->hob_feature << 8, base + 0xc);
+                __raw_writew(tf->hob_nsect | tf->hob_lbal << 8, base + 2);
+                __raw_writew(tf->hob_lbam | tf->hob_lbah << 8, base + 4);
+                VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+                        tf->hob_feature,
+                        tf->hob_nsect,
+                        tf->hob_lbal,
+                        tf->hob_lbam,
+                        tf->hob_lbah);
+        }
+        if (is_addr) {
+                __raw_writew(tf->feature << 8, base + 0xc);
+                __raw_writew(tf->nsect | tf->lbal << 8, base + 2);
+                __raw_writew(tf->lbam | tf->lbah << 8, base + 4);
+                VPRINTK("feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+                        tf->feature,
+                        tf->nsect,
+                        tf->lbal,
+                        tf->lbam,
+                        tf->lbah);
+        }
+        ata_wait_idle(ap);
+}
+
+
+static void octeon_cf_dev_select(struct ata_port *ap, unsigned int device)
+{
+/*  There is only one device, do nothing. */
+        return;
+}
+
+/*
+ * Issue ATA command to host controller.  The device_addr is also sent
+ * as it must be written in a combined write with the command.
+ */
+static void octeon_cf_exec_command16(struct ata_port *ap,
+                                const struct ata_taskfile *tf)
+{
+        /* The base of the registers is at ioaddr.data_addr. */
+        void __iomem *base = ap->ioaddr.data_addr;
+        u16 blob;
+
+        if (tf->flags & ATA_TFLAG_DEVICE) {
+                VPRINTK("device 0x%X\n", tf->device);
+                blob = tf->device;
+        } else {
+                blob = 0;
+        }
+
+        DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+        blob |= (tf->command << 8);
+        __raw_writew(blob, base + 6);
+
+
+        ata_wait_idle(ap);
+}
+
+static u8 octeon_cf_irq_on(struct ata_port *ap)
+{
+        return 0;
+}
+
+static void octeon_cf_irq_clear(struct ata_port *ap)
+{
+        return;
+}
+
+static void octeon_cf_dma_setup(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        struct octeon_cf_port *cf_port;
+
+        cf_port = (struct octeon_cf_port *)ap->private_data;
+        DPRINTK("ENTER\n");
+        /* issue r/w command */
+        qc->cursg = qc->sg;
+        cf_port->dma_finished = 0;
+        ap->ops->sff_exec_command(ap, &qc->tf);
+        DPRINTK("EXIT\n");
+}
+
+/**
+ * Start a DMA transfer that was already setup
+ *
+ * @qc:     Information about the DMA
+ */
+static void octeon_cf_dma_start(struct ata_queued_cmd *qc)
+{
+        struct octeon_cf_data *ocd = qc->ap->dev->platform_data;
+        union cvmx_mio_boot_dma_cfgx mio_boot_dma_cfg;
+        union cvmx_mio_boot_dma_intx mio_boot_dma_int;
+        struct scatterlist *sg;
+
+        VPRINTK("%d scatterlists\n", qc->n_elem);
+
+        /* Get the scatter list entry we need to DMA into */
+        sg = qc->cursg;
+        BUG_ON(!sg);
+
+        /*
+         * Clear the DMA complete status.
+         */
+        mio_boot_dma_int.u64 = 0;
+        mio_boot_dma_int.s.done = 1;
+        cvmx_write_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine),
+                       mio_boot_dma_int.u64);
+
+        /* Enable the interrupt.  */
+        cvmx_write_csr(CVMX_MIO_BOOT_DMA_INT_ENX(ocd->dma_engine),
+                       mio_boot_dma_int.u64);
+
+        /* Set the direction of the DMA */
+        mio_boot_dma_cfg.u64 = 0;
+        mio_boot_dma_cfg.s.en = 1;
+        mio_boot_dma_cfg.s.rw = ((qc->tf.flags & ATA_TFLAG_WRITE) != 0);
+
+        /*
+         * Don't stop the DMA if the device deasserts DMARQ. Many
+         * compact flashes deassert DMARQ for a short time between
+         * sectors. Instead of stopping and restarting the DMA, we'll
+         * let the hardware do it. If the DMA is really stopped early
+         * due to an error condition, a later timeout will force us to
+         * stop.
+         */
+        mio_boot_dma_cfg.s.clr = 0;
+
+        /* Size is specified in 16bit words and minus one notation */
+        mio_boot_dma_cfg.s.size = sg_dma_len(sg) / 2 - 1;
+
+        /* We need to swap the high and low bytes of every 16 bits */
+        mio_boot_dma_cfg.s.swap8 = 1;
+
+        mio_boot_dma_cfg.s.adr = sg_dma_address(sg);
+
+        VPRINTK("%s %d bytes address=%p\n",
+                (mio_boot_dma_cfg.s.rw) ? "write" : "read", sg->length,
+                (void *)(unsigned long)mio_boot_dma_cfg.s.adr);
+
+        cvmx_write_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine),
+                       mio_boot_dma_cfg.u64);
+}
+
+/**
+ *
+ *      LOCKING:
+ *      spin_lock_irqsave(host lock)
+ *
+ */
+static unsigned int octeon_cf_dma_finished(struct ata_port *ap,
+                                        struct ata_queued_cmd *qc)
+{
+        struct ata_eh_info *ehi = &ap->link.eh_info;
+        struct octeon_cf_data *ocd = ap->dev->platform_data;
+        union cvmx_mio_boot_dma_cfgx dma_cfg;
+        union cvmx_mio_boot_dma_intx dma_int;
+        struct octeon_cf_port *cf_port;
+        u8 status;
+
+        VPRINTK("ata%u: protocol %d task_state %d\n",
+                ap->print_id, qc->tf.protocol, ap->hsm_task_state);
+
+
+        if (ap->hsm_task_state != HSM_ST_LAST)
+                return 0;
+
+        cf_port = (struct octeon_cf_port *)ap->private_data;
+
+        dma_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine));
+        if (dma_cfg.s.size != 0xfffff) {
+                /* Error, the transfer was not complete.  */
+                qc->err_mask |= AC_ERR_HOST_BUS;
+                ap->hsm_task_state = HSM_ST_ERR;
+        }
+
+        /* Stop and clear the dma engine.  */
+        dma_cfg.u64 = 0;
+        dma_cfg.s.size = -1;
+        cvmx_write_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine), dma_cfg.u64);
+
+        /* Disable the interrupt.  */
+        dma_int.u64 = 0;
+        cvmx_write_csr(CVMX_MIO_BOOT_DMA_INT_ENX(ocd->dma_engine), dma_int.u64);
+
+        /* Clear the DMA complete status */
+        dma_int.s.done = 1;
+        cvmx_write_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine), dma_int.u64);
+
+        status = ap->ops->sff_check_status(ap);
+
+        ata_sff_hsm_move(ap, qc, status, 0);
+
+        if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA))
+                ata_ehi_push_desc(ehi, "DMA stat 0x%x", status);
+
+        return 1;
+}
+
+/*
+ * Check if any queued commands have more DMAs, if so start the next
+ * transfer, else do end of transfer handling.
+ */
+static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
+{
+        struct ata_host *host = dev_instance;
+        struct octeon_cf_port *cf_port;
+        int i;
+        unsigned int handled = 0;
+        unsigned long flags;
+
+        spin_lock_irqsave(&host->lock, flags);
+
+        DPRINTK("ENTER\n");
+        for (i = 0; i < host->n_ports; i++) {
+                u8 status;
+                struct ata_port *ap;
+                struct ata_queued_cmd *qc;
+                union cvmx_mio_boot_dma_intx dma_int;
+                union cvmx_mio_boot_dma_cfgx dma_cfg;
+                struct octeon_cf_data *ocd;
+
+                ap = host->ports[i];
+                ocd = ap->dev->platform_data;
+                if (!ap || (ap->flags & ATA_FLAG_DISABLED))
+                        continue;
+
+                ocd = ap->dev->platform_data;
+                cf_port = (struct octeon_cf_port *)ap->private_data;
+                dma_int.u64 =
+                        cvmx_read_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine));
+                dma_cfg.u64 =
+                        cvmx_read_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine));
+
+                qc = ata_qc_from_tag(ap, ap->link.active_tag);
+
+                if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+                    (qc->flags & ATA_QCFLAG_ACTIVE)) {
+                        if (dma_int.s.done && !dma_cfg.s.en) {
+                                if (!sg_is_last(qc->cursg)) {
+                                        qc->cursg = sg_next(qc->cursg);
+                                        handled = 1;
+                                        octeon_cf_dma_start(qc);
+                                        continue;
+                                } else {
+                                        cf_port->dma_finished = 1;
+                                }
+                        }
+                        if (!cf_port->dma_finished)
+                                continue;
+                        status = ioread8(ap->ioaddr.altstatus_addr);
+                        if (status & (ATA_BUSY | ATA_DRQ)) {
+                                /*
+                                 * We are busy, try to handle it
+                                 * later.  This is the DMA finished
+                                 * interrupt, and it could take a
+                                 * little while for the card to be
+                                 * ready for more commands.
+                                 */
+                                /* Clear DMA irq. */
+                                dma_int.u64 = 0;
+                                dma_int.s.done = 1;
+                                cvmx_write_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine),
+                                               dma_int.u64);
+
+                                queue_delayed_work(cf_port->wq,
+                                                   &cf_port->delayed_finish, 1);
+                                handled = 1;
+                        } else {
+                                handled |= octeon_cf_dma_finished(ap, qc);
+                        }
+                }
+        }
+        spin_unlock_irqrestore(&host->lock, flags);
+        DPRINTK("EXIT\n");
+        return IRQ_RETVAL(handled);
+}
+
+static void octeon_cf_delayed_finish(struct work_struct *work)
+{
+        struct octeon_cf_port *cf_port = container_of(work,
+                                                      struct octeon_cf_port,
+                                                      delayed_finish.work);
+        struct ata_port *ap = cf_port->ap;
+        struct ata_host *host = ap->host;
+        struct ata_queued_cmd *qc;
+        unsigned long flags;
+        u8 status;
+
+        spin_lock_irqsave(&host->lock, flags);
+
+        /*
+         * If the port is not waiting for completion, it must have
+         * handled it previously.  The hsm_task_state is
+         * protected by host->lock.
+         */
+        if (ap->hsm_task_state != HSM_ST_LAST || !cf_port->dma_finished)
+                goto out;
+
+        status = ioread8(ap->ioaddr.altstatus_addr);
+        if (status & (ATA_BUSY | ATA_DRQ)) {
+                /* Still busy, try again. */
+                queue_delayed_work(cf_port->wq,
+                                   &cf_port->delayed_finish, 1);
+                goto out;
+        }
+        qc = ata_qc_from_tag(ap, ap->link.active_tag);
+        if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+            (qc->flags & ATA_QCFLAG_ACTIVE))
+                octeon_cf_dma_finished(ap, qc);
+out:
+        spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void octeon_cf_dev_config(struct ata_device *dev)
+{
+        /*
+         * A maximum of 2^20 - 1 16 bit transfers are possible with
+         * the bootbus DMA.  So we need to throttle max_sectors to
+         * (2^12 - 1 == 4095) to assure that this can never happen.
+         */
+        dev->max_sectors = min(dev->max_sectors, 4095U);
+}
+
+/*
+ * Trap if driver tries to do standard bmdma commands.  They are not
+ * supported.
+ */
+static void unreachable_qc(struct ata_queued_cmd *qc)
+{
+        BUG();
+}
+
+static u8 unreachable_port(struct ata_port *ap)
+{
+        BUG();
+}
+
+/*
+ * We don't do ATAPI DMA so return 0.
+ */
+static int octeon_cf_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+        return 0;
+}
+
+static unsigned int octeon_cf_qc_issue(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+
+        switch (qc->tf.protocol) {
+        case ATA_PROT_DMA:
+                WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
+                ap->ops->sff_tf_load(ap, &qc->tf);  /* load tf registers */
+                octeon_cf_dma_setup(qc);            /* set up dma */
+                octeon_cf_dma_start(qc);            /* initiate dma */
+                ap->hsm_task_state = HSM_ST_LAST;
+                break;
+
+        case ATAPI_PROT_DMA:
+                dev_err(ap->dev, "Error, ATAPI not supported\n");
+                BUG();
+
+        default:
+                return ata_sff_qc_issue(qc);
+        }
+
+        return 0;
+}
+
+static struct ata_port_operations octeon_cf_ops = {
+        .inherits               = &ata_sff_port_ops,
+        .check_atapi_dma        = octeon_cf_check_atapi_dma,
+        .qc_prep                = ata_noop_qc_prep,
+        .qc_issue               = octeon_cf_qc_issue,
+        .sff_dev_select         = octeon_cf_dev_select,
+        .sff_irq_on             = octeon_cf_irq_on,
+        .sff_irq_clear          = octeon_cf_irq_clear,
+        .bmdma_setup            = unreachable_qc,
+        .bmdma_start            = unreachable_qc,
+        .bmdma_stop             = unreachable_qc,
+        .bmdma_status           = unreachable_port,
+        .cable_detect           = ata_cable_40wire,
+        .set_piomode            = octeon_cf_set_piomode,
+        .set_dmamode            = octeon_cf_set_dmamode,
+        .dev_config             = octeon_cf_dev_config,
+};
+
+static int __devinit octeon_cf_probe(struct platform_device *pdev)
+{
+        struct resource *res_cs0, *res_cs1;
+
+        void __iomem *cs0;
+        void __iomem *cs1 = NULL;
+        struct ata_host *host;
+        struct ata_port *ap;
+        struct octeon_cf_data *ocd;
+        int irq = 0;
+        irq_handler_t irq_handler = NULL;
+        void __iomem *base;
+        struct octeon_cf_port *cf_port;
+
+        res_cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+        if (!res_cs0)
+                return -EINVAL;
+
+        ocd = pdev->dev.platform_data;
+
+        cs0 = devm_ioremap_nocache(&pdev->dev, res_cs0->start,
+                                   res_cs0->end - res_cs0->start + 1);
+
+        if (!cs0)
+                return -ENOMEM;
+
+        /* Determine from availability of DMA if True IDE mode or not */
+        if (ocd->dma_engine >= 0) {
+                res_cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+                if (!res_cs1)
+                        return -EINVAL;
+
+                cs1 = devm_ioremap_nocache(&pdev->dev, res_cs1->start,
+                                           res_cs0->end - res_cs1->start + 1);
+
+                if (!cs1)
+                        return -ENOMEM;
+        }
+
+        cf_port = kzalloc(sizeof(*cf_port), GFP_KERNEL);
+        if (!cf_port)
+                return -ENOMEM;
+
+        /* allocate host */
+        host = ata_host_alloc(&pdev->dev, 1);
+        if (!host)
+                goto free_cf_port;
+
+        ap = host->ports[0];
+        ap->private_data = cf_port;
+        cf_port->ap = ap;
+        ap->ops = &octeon_cf_ops;
+        ap->pio_mask = 0x7f; /* Support PIO 0-6 */
+        ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
+                  | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING;
+
+        base = cs0 + ocd->base_region_bias;
+        if (!ocd->is16bit) {
+                ap->ioaddr.cmd_addr     = base;
+                ata_sff_std_ports(&ap->ioaddr);
+
+                ap->ioaddr.altstatus_addr = base + 0xe;
+                ap->ioaddr.ctl_addr     = base + 0xe;
+                octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer8;
+        } else if (cs1) {
+                /* Presence of cs1 indicates True IDE mode.  */
+                ap->ioaddr.cmd_addr     = base + (ATA_REG_CMD << 1) + 1;
+                ap->ioaddr.data_addr    = base + (ATA_REG_DATA << 1);
+                ap->ioaddr.error_addr   = base + (ATA_REG_ERR << 1) + 1;
+                ap->ioaddr.feature_addr = base + (ATA_REG_FEATURE << 1) + 1;
+                ap->ioaddr.nsect_addr   = base + (ATA_REG_NSECT << 1) + 1;
+                ap->ioaddr.lbal_addr    = base + (ATA_REG_LBAL << 1) + 1;
+                ap->ioaddr.lbam_addr    = base + (ATA_REG_LBAM << 1) + 1;
+                ap->ioaddr.lbah_addr    = base + (ATA_REG_LBAH << 1) + 1;
+                ap->ioaddr.device_addr  = base + (ATA_REG_DEVICE << 1) + 1;
+                ap->ioaddr.status_addr  = base + (ATA_REG_STATUS << 1) + 1;
+                ap->ioaddr.command_addr = base + (ATA_REG_CMD << 1) + 1;
+                ap->ioaddr.altstatus_addr = cs1 + (6 << 1) + 1;
+                ap->ioaddr.ctl_addr     = cs1 + (6 << 1) + 1;
+                octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16;
+
+                ap->mwdma_mask  = 0x1f; /* Support MWDMA 0-4 */
+                irq = platform_get_irq(pdev, 0);
+                irq_handler = octeon_cf_interrupt;
+
+                /* True IDE mode needs delayed work to poll for not-busy.  */
+                cf_port->wq = create_singlethread_workqueue(DRV_NAME);
+                if (!cf_port->wq)
+                        goto free_cf_port;
+                INIT_DELAYED_WORK(&cf_port->delayed_finish,
+                                  octeon_cf_delayed_finish);
+
+        } else {
+                /* 16 bit but not True IDE */
+                octeon_cf_ops.sff_data_xfer     = octeon_cf_data_xfer16;
+                octeon_cf_ops.softreset         = octeon_cf_softreset16;
+                octeon_cf_ops.sff_check_status  = octeon_cf_check_status16;
+                octeon_cf_ops.sff_tf_read       = octeon_cf_tf_read16;
+                octeon_cf_ops.sff_tf_load       = octeon_cf_tf_load16;
+                octeon_cf_ops.sff_exec_command  = octeon_cf_exec_command16;
+
+                ap->ioaddr.data_addr    = base + ATA_REG_DATA;
+                ap->ioaddr.nsect_addr   = base + ATA_REG_NSECT;
+                ap->ioaddr.lbal_addr    = base + ATA_REG_LBAL;
+                ap->ioaddr.ctl_addr     = base + 0xe;
+                ap->ioaddr.altstatus_addr = base + 0xe;
+        }
+
+        ata_port_desc(ap, "cmd %p ctl %p", base, ap->ioaddr.ctl_addr);
+
+
+        dev_info(&pdev->dev, "version " DRV_VERSION" %d bit%s.\n",
+                 (ocd->is16bit) ? 16 : 8,
+                 (cs1) ? ", True IDE" : "");
+
+
+        return ata_host_activate(host, irq, irq_handler, 0, &octeon_cf_sht);
+
+free_cf_port:
+        kfree(cf_port);
+        return -ENOMEM;
+}
+
+static struct platform_driver octeon_cf_driver = {
+        .probe          = octeon_cf_probe,
+        .driver         = {
+                .name   = DRV_NAME,
+                .owner  = THIS_MODULE,
+        },
+};
+
+static int __init octeon_cf_init(void)
+{
+        return platform_driver_register(&octeon_cf_driver);
+}
+
+
+MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
+MODULE_DESCRIPTION("low-level driver for Cavium OCTEON Compact Flash PATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(octeon_cf_init);
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 1a56db92ff7a..55bc88c1707b 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1288,7 +1288,7 @@ static const struct ata_port_info sata_fsl_port_info[] = {
 static int sata_fsl_probe(struct of_device *ofdev,
                         const struct of_device_id *match)
 {
-        int retval = 0;
+        int retval = -ENXIO;
         void __iomem *hcr_base = NULL;
         void __iomem *ssr_base = NULL;
         void __iomem *csr_base = NULL;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index c18935f0bda2..5c62da9cd491 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -92,6 +92,8 @@ static const struct pci_device_id svia_pci_tbl[] = {
         { PCI_VDEVICE(VIA, 0x5372), vt6420 },
         { PCI_VDEVICE(VIA, 0x7372), vt6420 },
         { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
+        { PCI_VDEVICE(VIA, 0x9000), vt8251 },
+        { PCI_VDEVICE(VIA, 0x9040), vt8251 },
 
         { }     /* terminate list */
 };
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 7bcc1d8bc967..34f80fa6fed1 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -406,6 +406,7 @@ static int nbd_do_it(struct nbd_device *lo)
         ret = sysfs_create_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
         if (ret) {
                 printk(KERN_ERR "nbd: sysfs_create_file failed!");
+                lo->pid = 0;
                 return ret;
         }
 
@@ -413,6 +414,7 @@ static int nbd_do_it(struct nbd_device *lo)
                 nbd_end_request(req);
 
         sysfs_remove_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
+        lo->pid = 0;
         return 0;
 }
 
@@ -648,6 +650,8 @@ static int nbd_ioctl(struct block_device *bdev, fmode_t mode,
                 set_capacity(lo->disk, lo->bytesize >> 9);
                 return 0;
         case NBD_DO_IT:
+                if (lo->pid)
+                        return -EBUSY;
                 if (!lo->file)
                         return -EINVAL;
                 thread = kthread_create(nbd_thread, lo, lo->disk->disk_name);
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index 936466f62afd..bccc42bb9212 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -141,7 +141,7 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
 
         start_sector = req->sector * priv->blocking_factor;
         sectors = req->nr_sectors * priv->blocking_factor;
-        dev_dbg(&dev->sbd.core, "%s:%u: %s %lu sectors starting at %lu\n",
+        dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
                 __func__, __LINE__, op, sectors, start_sector);
 
         if (write) {
@@ -178,7 +178,7 @@ static int ps3disk_submit_flush_request(struct ps3_storage_device *dev,
                                               LV1_STORAGE_ATA_HDDOUT, 0, 0, 0,
                                               0, &dev->tag);
         if (res) {
-                dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%lx\n",
+                dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n",
                         __func__, __LINE__, res);
                 end_request(req, 0);
                 return 0;
@@ -238,11 +238,11 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data)
 
         if (tag != dev->tag)
                 dev_err(&dev->sbd.core,
-                        "%s:%u: tag mismatch, got %lx, expected %lx\n",
+                        "%s:%u: tag mismatch, got %llx, expected %llx\n",
                         __func__, __LINE__, tag, dev->tag);
 
         if (res) {
-                dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%lx\n",
+                dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
                         __func__, __LINE__, res, status);
                 return IRQ_HANDLED;
         }
@@ -269,7 +269,7 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data)
                 op = read ? "read" : "write";
         }
         if (status) {
-                dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%lx\n", __func__,
+                dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
                         __LINE__, op, status);
                 error = -EIO;
         } else {
@@ -297,7 +297,7 @@ static int ps3disk_sync_cache(struct ps3_storage_device *dev)
 
         res = ps3stor_send_command(dev, LV1_STORAGE_ATA_HDDOUT, 0, 0, 0, 0);
         if (res) {
-                dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%lx\n",
+                dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n",
                         __func__, __LINE__, res);
                 return -EIO;
         }
@@ -388,7 +388,7 @@ static int ps3disk_identify(struct ps3_storage_device *dev)
                                    sizeof(ata_cmnd), ata_cmnd.buffer,
                                    ata_cmnd.arglen);
         if (res) {
-                dev_err(&dev->sbd.core, "%s:%u: identify disk failed 0x%lx\n",
+                dev_err(&dev->sbd.core, "%s:%u: identify disk failed 0x%llx\n",
                         __func__, __LINE__, res);
                 return -EIO;
         }
@@ -426,7 +426,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
 
         if (dev->blk_size < 512) {
                 dev_err(&dev->sbd.core,
-                        "%s:%u: cannot handle block size %lu\n", __func__,
+                        "%s:%u: cannot handle block size %llu\n", __func__,
                         __LINE__, dev->blk_size);
                 return -EINVAL;
         }
@@ -512,7 +512,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
                      dev->regions[dev->region_idx].size*priv->blocking_factor);
 
         dev_info(&dev->sbd.core,
-                 "%s is a %s (%lu MiB total, %lu MiB for OtherOS)\n",
+                 "%s is a %s (%llu MiB total, %lu MiB for OtherOS)\n",
                  gendisk->disk_name, priv->model, priv->raw_capacity >> 11,
                  get_capacity(gendisk) >> 11);
 
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 29e1dfafb7c6..381d686fc1a3 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1206,6 +1206,7 @@ static struct of_device_id ace_of_match[] __devinitdata = {
         { .compatible = "xlnx,opb-sysace-1.00.b", },
         { .compatible = "xlnx,opb-sysace-1.00.c", },
         { .compatible = "xlnx,xps-sysace-1.00.a", },
+        { .compatible = "xlnx,sysace", },
         {},
 };
 MODULE_DEVICE_TABLE(of, ace_of_match);
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 977dfb1096a0..f6094ae0ef33 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -103,7 +103,7 @@ static ssize_t
 bsr_len_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct bsr_dev *bsr_dev = dev_get_drvdata(dev);
-        return sprintf(buf, "%lu\n", bsr_dev->bsr_len);
+        return sprintf(buf, "%llu\n", bsr_dev->bsr_len);
 }
 
 static struct device_attribute bsr_dev_attrs[] = {
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 5a8a4c28c867..94e7e3c8c05a 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -318,7 +318,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
         } /* else count == 0 */
 
         tty->driver_data = hp;
-        tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
 
         hp->tty = tty;
 
@@ -764,13 +763,11 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data,
                         return ERR_PTR(err);
         }
 
-        hp = kmalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
+        hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
                         GFP_KERNEL);
         if (!hp)
                 return ERR_PTR(-ENOMEM);
 
-        memset(hp, 0x00, sizeof(*hp));
-
         hp->vtermno = vtermno;
         hp->data = data;
         hp->ops = ops;
@@ -876,8 +873,11 @@ static int hvc_init(void)
                 goto stop_thread;
         }
 
-        /* FIXME: This mb() seems completely random.  Remove it. */
-        mb();
+        /*
+         * Make sure tty is fully registered before allowing it to be
+         * found by hvc_console_device.
+         */
+        smp_mb();
         hvc_driver = drv;
         return 0;
 
diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c
index d09e5688d449..2623e177e8d6 100644
--- a/drivers/char/hvc_irq.c
+++ b/drivers/char/hvc_irq.c
@@ -37,7 +37,7 @@ int notifier_add_irq(struct hvc_struct *hp, int irq)
 
 void notifier_del_irq(struct hvc_struct *hp, int irq)
 {
-        if (!irq)
+        if (!hp->irq_requested)
                 return;
         free_irq(irq, hp);
         hp->irq_requested = 0;
diff --git a/drivers/char/ps3flash.c b/drivers/char/ps3flash.c
index 79b6f461be75..afbe45676d71 100644
--- a/drivers/char/ps3flash.c
+++ b/drivers/char/ps3flash.c
@@ -44,7 +44,7 @@ static ssize_t ps3flash_read_write_sectors(struct ps3_storage_device *dev,
         u64 res = ps3stor_read_write_sectors(dev, lpar, start_sector, sectors,
                                              write);
         if (res) {
-                dev_err(&dev->sbd.core, "%s:%u: %s failed 0x%lx\n", __func__,
+                dev_err(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
                         __LINE__, write ? "write" : "read", res);
                 return -EIO;
         }
@@ -59,7 +59,7 @@ static ssize_t ps3flash_read_sectors(struct ps3_storage_device *dev,
 
         max_sectors = dev->bounce_size / dev->blk_size;
         if (sectors > max_sectors) {
-                dev_dbg(&dev->sbd.core, "%s:%u Limiting sectors to %lu\n",
+                dev_dbg(&dev->sbd.core, "%s:%u Limiting sectors to %llu\n",
                         __func__, __LINE__, max_sectors);
                 sectors = max_sectors;
         }
@@ -144,7 +144,7 @@ static ssize_t ps3flash_read(struct file *file, char __user *buf, size_t count,
                         goto fail;
                 }
 
-                n = min(remaining, sectors_read*dev->blk_size-offset);
+                n = min_t(u64, remaining, sectors_read*dev->blk_size-offset);
                 dev_dbg(&dev->sbd.core,
                         "%s:%u: copy %lu bytes from 0x%p to user 0x%p\n",
                         __func__, __LINE__, n, dev->bounce_buf+offset, buf);
@@ -225,7 +225,7 @@ static ssize_t ps3flash_write(struct file *file, const char __user *buf,
                 if (end_read_sector >= start_read_sector) {
                         /* Merge head and tail */
                         dev_dbg(&dev->sbd.core,
-                                "Merged head and tail: %lu sectors at %lu\n",
+                                "Merged head and tail: %llu sectors at %llu\n",
                                 chunk_sectors, start_write_sector);
                         res = ps3flash_read_sectors(dev, start_write_sector,
                                                     chunk_sectors, 0);
@@ -235,7 +235,7 @@ static ssize_t ps3flash_write(struct file *file, const char __user *buf,
                         if (head) {
                                 /* Read head */
                                 dev_dbg(&dev->sbd.core,
-                                        "head: %lu sectors at %lu\n", head,
+                                        "head: %llu sectors at %llu\n", head,
                                         start_write_sector);
                                 res = ps3flash_read_sectors(dev,
                                                             start_write_sector,
@@ -247,7 +247,7 @@ static ssize_t ps3flash_write(struct file *file, const char __user *buf,
                             start_write_sector+chunk_sectors) {
                                 /* Read tail */
                                 dev_dbg(&dev->sbd.core,
-                                        "tail: %lu sectors at %lu\n", tail,
+                                        "tail: %llu sectors at %llu\n", tail,
                                         start_read_sector);
                                 sec_off = start_read_sector-start_write_sector;
                                 res = ps3flash_read_sectors(dev,
@@ -258,7 +258,7 @@ static ssize_t ps3flash_write(struct file *file, const char __user *buf,
                         }
                 }
 
-                n = min(remaining, dev->bounce_size-offset);
+                n = min_t(u64, remaining, dev->bounce_size-offset);
                 dev_dbg(&dev->sbd.core,
                         "%s:%u: copy %lu bytes from user 0x%p to 0x%p\n",
                         __func__, __LINE__, n, buf, dev->bounce_buf+offset);
@@ -299,11 +299,11 @@ static irqreturn_t ps3flash_interrupt(int irq, void *data)
 
         if (tag != dev->tag)
                 dev_err(&dev->sbd.core,
-                        "%s:%u: tag mismatch, got %lx, expected %lx\n",
+                        "%s:%u: tag mismatch, got %llx, expected %llx\n",
                         __func__, __LINE__, tag, dev->tag);
 
         if (res) {
-                dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%lx\n",
+                dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
                         __func__, __LINE__, res, status);
         } else {
                 dev->lv1_status = status;
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 53544e21f191..f329f459817c 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1,6 +1,4 @@
 /*
- * $Id: synclink_gt.c,v 4.50 2007/07/25 19:29:25 paulkf Exp $
- *
  * Device driver for Microgate SyncLink GT serial adapters.
  *
  * written by Paul Fulghum for Microgate Corporation
@@ -91,7 +89,6 @@
  * module identification
  */
 static char *driver_name     = "SyncLink GT";
-static char *driver_version  = "$Revision: 4.50 $";
 static char *tty_driver_name = "synclink_gt";
 static char *tty_dev_prefix  = "ttySLG";
 MODULE_LICENSE("GPL");
@@ -1309,7 +1306,7 @@ static int read_proc(char *page, char **start, off_t off, int count,
         off_t   begin = 0;
         struct slgt_info *info;
 
-        len += sprintf(page, "synclink_gt driver:%s\n", driver_version);
+        len += sprintf(page, "synclink_gt driver\n");
 
         info = slgt_device_list;
         while( info ) {
@@ -2441,7 +2438,7 @@ static void program_hw(struct slgt_info *info)
         info->ri_chkcount = 0;
         info->dsr_chkcount = 0;
 
-        slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR);
+        slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
         get_signals(info);
 
         if (info->netcount ||
@@ -3576,7 +3573,7 @@ static void slgt_cleanup(void)
         struct slgt_info *info;
         struct slgt_info *tmp;
 
-        printk("unload %s %s\n", driver_name, driver_version);
+        printk(KERN_INFO "unload %s\n", driver_name);
 
         if (serial_driver) {
                 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
@@ -3619,7 +3616,7 @@ static int __init slgt_init(void)
 {
         int rc;
 
-        printk("%s %s\n", driver_name, driver_version);
+        printk(KERN_INFO "%s\n", driver_name);
 
         serial_driver = alloc_tty_driver(MAX_DEVICES);
         if (!serial_driver) {
@@ -3650,9 +3647,8 @@ static int __init slgt_init(void)
                 goto error;
         }
 
-        printk("%s %s, tty major#%d\n",
-                driver_name, driver_version,
-                serial_driver->major);
+        printk(KERN_INFO "%s, tty major#%d\n",
+               driver_name, serial_driver->major);
 
         slgt_device_count = 0;
         if ((rc = pci_register_driver(&pci_driver)) < 0) {
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index d41b9f6f7903..33a9351c896d 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -473,6 +473,12 @@ void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
         unsigned long flags;
 
         spin_lock_irqsave(&sysrq_key_table_lock, flags);
+        /*
+         * Raise the apparent loglevel to maximum so that the sysrq header
+         * is shown to provide the user with positive feedback.  We do not
+         * simply emit this at KERN_EMERG as that would change message
+         * routing in the consumers of /proc/kmsg.
+         */
         orig_log_level = console_loglevel;
         console_loglevel = 7;
         printk(KERN_INFO "SysRq : ");
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index a408c8e487ec..6f4c7d0a53bf 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -1057,7 +1057,7 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
         if (retval)
                 return retval;
 
-        ld = tty_ldisc_ref(tty);
+        ld = tty_ldisc_ref_wait(tty);
         switch (arg) {
         case TCIFLUSH:
                 if (ld && ld->ops->flush_buffer)
diff --git a/drivers/gpio/max7301.c b/drivers/gpio/max7301.c
index 8b24d784db93..3e7f4e06386e 100644
--- a/drivers/gpio/max7301.c
+++ b/drivers/gpio/max7301.c
@@ -217,8 +217,10 @@ static int __devinit max7301_probe(struct spi_device *spi)
         int i, ret;
 
         pdata = spi->dev.platform_data;
-        if (!pdata || !pdata->base)
-                return -ENODEV;
+        if (!pdata || !pdata->base) {
+                dev_dbg(&spi->dev, "incorrect or missing platform data\n");
+                return -EINVAL;
+        }
 
         /*
          * bits_per_word cannot be configured in platform data
diff --git a/drivers/gpio/max732x.c b/drivers/gpio/max732x.c
index 55ae9a41897a..f7868243af89 100644
--- a/drivers/gpio/max732x.c
+++ b/drivers/gpio/max732x.c
@@ -267,8 +267,10 @@ static int __devinit max732x_probe(struct i2c_client *client,
         int ret, nr_port;
 
         pdata = client->dev.platform_data;
-        if (pdata == NULL)
-                return -ENODEV;
+        if (pdata == NULL) {
+                dev_dbg(&client->dev, "no platform data\n");
+                return -EINVAL;
+        }
 
         chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
         if (chip == NULL)
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index 89c1d222e9d1..f6fae0e50e65 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -310,8 +310,10 @@ static int mcp23s08_probe(struct spi_device *spi)
         unsigned                        base;
 
         pdata = spi->dev.platform_data;
-        if (!pdata || !gpio_is_valid(pdata->base))
-                return -ENODEV;
+        if (!pdata || !gpio_is_valid(pdata->base)) {
+                dev_dbg(&spi->dev, "invalid or missing platform data\n");
+                return -EINVAL;
+        }
 
         for (addr = 0; addr < 4; addr++) {
                 if (!pdata->chip[addr].is_present)
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 37f35388a2ae..8dc0164bd51e 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -202,8 +202,10 @@ static int __devinit pca953x_probe(struct i2c_client *client,
         int ret;
 
         pdata = client->dev.platform_data;
-        if (pdata == NULL)
-                return -ENODEV;
+        if (pdata == NULL) {
+                dev_dbg(&client->dev, "no platform data\n");
+                return -EINVAL;
+        }
 
         chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
         if (chip == NULL)
diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
index 4bc2070dd4a1..9525724be731 100644
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
@@ -188,8 +188,10 @@ static int pcf857x_probe(struct i2c_client *client,
         int                             status;
 
         pdata = client->dev.platform_data;
-        if (!pdata)
-                return -ENODEV;
+        if (!pdata) {
+                dev_dbg(&client->dev, "no platform data\n");
+                return -EINVAL;
+        }
 
         /* Allocate, initialize, and register this gpio_chip. */
         gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
@@ -248,8 +250,10 @@ static int pcf857x_probe(struct i2c_client *client,
                 else
                         status = i2c_read_le16(client);
 
-        } else
-                status = -ENODEV;
+        } else {
+                dev_dbg(&client->dev, "unsupported number of gpios\n");
+                status = -EINVAL;
+        }
 
         if (status < 0)
                 goto fail;
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index d8a982b71296..964c5eb1fada 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -36,7 +36,7 @@
 /*
  * Detailed mode info for 800x600@60Hz
  */
-static struct drm_display_mode std_mode[] = {
+static struct drm_display_mode std_modes[] = {
         { DRM_MODE("800x600", DRM_MODE_TYPE_DEFAULT, 40000, 800, 840,
                    968, 1056, 0, 600, 601, 605, 628, 0,
                    DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
@@ -60,15 +60,18 @@ static struct drm_display_mode std_mode[] = {
  * changes have occurred.
  *
  * FIXME: take into account monitor limits
+ *
+ * RETURNS:
+ * Number of modes found on @connector.
  */
-void drm_helper_probe_single_connector_modes(struct drm_connector *connector,
-                                             uint32_t maxX, uint32_t maxY)
+int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
+                                            uint32_t maxX, uint32_t maxY)
 {
         struct drm_device *dev = connector->dev;
         struct drm_display_mode *mode, *t;
         struct drm_connector_helper_funcs *connector_funcs =
                 connector->helper_private;
-        int ret;
+        int count = 0;
 
         DRM_DEBUG("%s\n", drm_get_connector_name(connector));
         /* set all modes to the unverified state */
@@ -81,14 +84,14 @@ void drm_helper_probe_single_connector_modes(struct drm_connector *connector,
                 DRM_DEBUG("%s is disconnected\n",
                           drm_get_connector_name(connector));
                 /* TODO set EDID to NULL */
-                return;
+                return 0;
         }
 
-        ret = (*connector_funcs->get_modes)(connector);
+        count = (*connector_funcs->get_modes)(connector);
+        if (!count)
+                return 0;
 
-        if (ret) {
-                drm_mode_connector_list_update(connector);
-        }
+        drm_mode_connector_list_update(connector);
 
         if (maxX && maxY)
                 drm_mode_validate_size(dev, &connector->modes, maxX,
@@ -102,25 +105,8 @@ void drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 
         drm_mode_prune_invalid(dev, &connector->modes, true);
 
-        if (list_empty(&connector->modes)) {
-                struct drm_display_mode *stdmode;
-
-                DRM_DEBUG("No valid modes on %s\n",
-                          drm_get_connector_name(connector));
-
-                /* Should we do this here ???
-                 * When no valid EDID modes are available we end up
-                 * here and bailed in the past, now we add a standard
-                 * 640x480@60Hz mode and carry on.
-                 */
-                stdmode = drm_mode_duplicate(dev, &std_mode[0]);
-                drm_mode_probed_add(connector, stdmode);
-                drm_mode_list_concat(&connector->probed_modes,
-                                     &connector->modes);
-
-                DRM_DEBUG("Adding standard 640x480 @ 60Hz to %s\n",
-                          drm_get_connector_name(connector));
-        }
+        if (list_empty(&connector->modes))
+                return 0;
 
         drm_mode_sort(&connector->modes);
 
@@ -131,20 +117,58 @@ void drm_helper_probe_single_connector_modes(struct drm_connector *connector,
                 drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
                 drm_mode_debug_printmodeline(mode);
         }
+
+        return count;
 }
 EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
 
-void drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
+int drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
                                       uint32_t maxY)
 {
         struct drm_connector *connector;
+        int count = 0;
 
         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-                drm_helper_probe_single_connector_modes(connector, maxX, maxY);
+                count += drm_helper_probe_single_connector_modes(connector,
+                                                                 maxX, maxY);
         }
+
+        return count;
 }
 EXPORT_SYMBOL(drm_helper_probe_connector_modes);
 
+static void drm_helper_add_std_modes(struct drm_device *dev,
+                                     struct drm_connector *connector)
+{
+        struct drm_display_mode *mode, *t;
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(std_modes); i++) {
+                struct drm_display_mode *stdmode;
+
+                /*
+                 * When no valid EDID modes are available we end up
+                 * here and bailed in the past, now we add some standard
+                 * modes and move on.
+                 */
+                stdmode = drm_mode_duplicate(dev, &std_modes[i]);
+                drm_mode_probed_add(connector, stdmode);
+                drm_mode_list_concat(&connector->probed_modes,
+                                     &connector->modes);
+
+                DRM_DEBUG("Adding mode %s to %s\n", stdmode->name,
+                          drm_get_connector_name(connector));
+        }
+        drm_mode_sort(&connector->modes);
+
+        DRM_DEBUG("Added std modes on %s\n", drm_get_connector_name(connector));
+        list_for_each_entry_safe(mode, t, &connector->modes, head) {
+                mode->vrefresh = drm_mode_vrefresh(mode);
+
+                drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+                drm_mode_debug_printmodeline(mode);
+        }
+}
 
 /**
  * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
@@ -237,6 +261,8 @@ static void drm_enable_connectors(struct drm_device *dev, bool *enabled)
 
         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                 enabled[i] = drm_connector_enabled(connector, true);
+                DRM_DEBUG("connector %d enabled? %s\n", connector->base.id,
+                          enabled[i] ? "yes" : "no");
                 any_enabled |= enabled[i];
                 i++;
         }
@@ -265,11 +291,17 @@ static bool drm_target_preferred(struct drm_device *dev,
                         continue;
                 }
 
+                DRM_DEBUG("looking for preferred mode on connector %d\n",
+                          connector->base.id);
+
                 modes[i] = drm_has_preferred_mode(connector, width, height);
-                if (!modes[i]) {
+                /* No preferred modes, pick one off the list */
+                if (!modes[i] && !list_empty(&connector->modes)) {
                         list_for_each_entry(modes[i], &connector->modes, head)
                                 break;
                 }
+                DRM_DEBUG("found mode %s\n", modes[i] ? modes[i]->name :
+                          "none");
                 i++;
         }
         return true;
@@ -369,6 +401,8 @@ static void drm_setup_crtcs(struct drm_device *dev)
         int width, height;
         int i, ret;
 
+        DRM_DEBUG("\n");
+
         width = dev->mode_config.max_width;
         height = dev->mode_config.max_height;
 
@@ -390,6 +424,8 @@ static void drm_setup_crtcs(struct drm_device *dev)
         if (!ret)
                 DRM_ERROR("Unable to find initial modes\n");
 
+        DRM_DEBUG("picking CRTCs for %dx%d config\n", width, height);
+
         drm_pick_crtcs(dev, crtcs, modes, 0, width, height);
 
         i = 0;
@@ -403,6 +439,8 @@ static void drm_setup_crtcs(struct drm_device *dev)
                 }
 
                 if (mode && crtc) {
+                        DRM_DEBUG("desired mode %s set on crtc %d\n",
+                                  mode->name, crtc->base.id);
                         crtc->desired_mode = mode;
                         connector->encoder->crtc = crtc;
                 } else
@@ -442,6 +480,7 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
         int saved_x, saved_y;
         struct drm_encoder *encoder;
         bool ret = true;
+        bool depth_changed, bpp_changed;
 
         adjusted_mode = drm_mode_duplicate(dev, mode);
 
@@ -450,6 +489,15 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
         if (!crtc->enabled)
                 return true;
 
+        if (old_fb && crtc->fb) {
+                depth_changed = (old_fb->depth != crtc->fb->depth);
+                bpp_changed = (old_fb->bits_per_pixel !=
+                               crtc->fb->bits_per_pixel);
+        } else {
+                depth_changed = true;
+                bpp_changed = true;
+        }
+
         saved_mode = crtc->mode;
         saved_x = crtc->x;
         saved_y = crtc->y;
@@ -462,7 +510,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
         crtc->y = y;
 
         if (drm_mode_equal(&saved_mode, &crtc->mode)) {
-                if (saved_x != crtc->x || saved_y != crtc->y) {
+                if (saved_x != crtc->x || saved_y != crtc->y ||
+                    depth_changed || bpp_changed) {
                         crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
                                                   old_fb);
                         goto done;
@@ -568,8 +617,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
         struct drm_encoder **save_encoders, *new_encoder;
         struct drm_framebuffer *old_fb;
         bool save_enabled;
-        bool changed = false;
-        bool flip_or_move = false;
+        bool mode_changed = false;
+        bool fb_changed = false;
         struct drm_connector *connector;
         int count = 0, ro, fail = 0;
         struct drm_crtc_helper_funcs *crtc_funcs;
@@ -597,7 +646,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
         /* save previous config */
         save_enabled = set->crtc->enabled;
 
-        /* this is meant to be num_connector not num_crtc */
+        /*
+         * We do mode_config.num_connectors here since we'll look at the
+         * CRTC and encoder associated with each connector later.
+         */
         save_crtcs = kzalloc(dev->mode_config.num_connector *
                              sizeof(struct drm_crtc *), GFP_KERNEL);
         if (!save_crtcs)
@@ -613,21 +665,25 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
         /* We should be able to check here if the fb has the same properties
          * and then just flip_or_move it */
         if (set->crtc->fb != set->fb) {
-                /* if we have no fb then its a change not a flip */
+                /* If we have no fb then treat it as a full mode set */
                 if (set->crtc->fb == NULL)
-                        changed = true;
+                        mode_changed = true;
+                else if ((set->fb->bits_per_pixel !=
+                         set->crtc->fb->bits_per_pixel) ||
+                         set->fb->depth != set->crtc->fb->depth)
+                        fb_changed = true;
                 else
-                        flip_or_move = true;
+                        fb_changed = true;
         }
 
         if (set->x != set->crtc->x || set->y != set->crtc->y)
-                flip_or_move = true;
+                fb_changed = true;
 
         if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
                 DRM_DEBUG("modes are different\n");
                 drm_mode_debug_printmodeline(&set->crtc->mode);
                 drm_mode_debug_printmodeline(set->mode);
-                changed = true;
+                mode_changed = true;
         }
 
         /* a) traverse passed in connector list and get encoders for them */
@@ -650,7 +706,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
                 }
 
                 if (new_encoder != connector->encoder) {
-                        changed = true;
+                        mode_changed = true;
                         connector->encoder = new_encoder;
                 }
         }
@@ -677,16 +733,16 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
                                 new_crtc = set->crtc;
                 }
                 if (new_crtc != connector->encoder->crtc) {
-                        changed = true;
+                        mode_changed = true;
                         connector->encoder->crtc = new_crtc;
                 }
         }
 
         /* mode_set_base is not a required function */
-        if (flip_or_move && !crtc_funcs->mode_set_base)
-                changed = true;
+        if (fb_changed && !crtc_funcs->mode_set_base)
+                mode_changed = true;
 
-        if (changed) {
+        if (mode_changed) {
                 old_fb = set->crtc->fb;
                 set->crtc->fb = set->fb;
                 set->crtc->enabled = (set->mode != NULL);
@@ -705,7 +761,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
                         set->crtc->desired_mode = set->mode;
                 }
                 drm_helper_disable_unused_functions(dev);
-        } else if (flip_or_move) {
+        } else if (fb_changed) {
                 old_fb = set->crtc->fb;
                 if (set->crtc->fb != set->fb)
                         set->crtc->fb = set->fb;
@@ -764,10 +820,31 @@ bool drm_helper_plugged_event(struct drm_device *dev)
  */
 bool drm_helper_initial_config(struct drm_device *dev, bool can_grow)
 {
-        int ret = false;
+        struct drm_connector *connector;
+        int count = 0;
 
-        drm_helper_plugged_event(dev);
-        return ret;
+        count = drm_helper_probe_connector_modes(dev,
+                                                 dev->mode_config.max_width,
+                                                 dev->mode_config.max_height);
+
+        /*
+         * None of the available connectors had any modes, so add some
+         * and try to light them up anyway
+         */
+        if (!count) {
+                DRM_ERROR("connectors have no modes, using standard modes\n");
+                list_for_each_entry(connector,
+                                    &dev->mode_config.connector_list,
+                                    head)
+                        drm_helper_add_std_modes(dev, connector);
+        }
+
+        drm_setup_crtcs(dev);
+
+        /* alert the driver fb layer */
+        dev->mode_config.funcs->fb_changed(dev);
+
+        return 0;
 }
 EXPORT_SYMBOL(drm_helper_initial_config);
 
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 724e505873cf..477caa1b1e4b 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -267,7 +267,8 @@ EXPORT_SYMBOL(drm_irq_install);
  */
 int drm_irq_uninstall(struct drm_device * dev)
 {
-        int irq_enabled;
+        unsigned long irqflags;
+        int irq_enabled, i;
 
         if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
                 return -EINVAL;
@@ -277,6 +278,16 @@ int drm_irq_uninstall(struct drm_device * dev)
         dev->irq_enabled = 0;
         mutex_unlock(&dev->struct_mutex);
 
+        /*
+         * Wake up any waiters so they don't hang.
+         */
+        spin_lock_irqsave(&dev->vbl_lock, irqflags);
+        for (i = 0; i < dev->num_crtcs; i++) {
+                DRM_WAKEUP(&dev->vbl_queue[i]);
+                dev->vblank_enabled[i] = 0;
+        }
+        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+
         if (!irq_enabled)
                 return -EINVAL;
 
@@ -652,8 +663,9 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
                           vblwait->request.sequence, crtc);
                 dev->last_vblank_wait[crtc] = vblwait->request.sequence;
                 DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
-                            ((drm_vblank_count(dev, crtc)
-                              - vblwait->request.sequence) <= (1 << 23)));
+                            (((drm_vblank_count(dev, crtc) -
+                               vblwait->request.sequence) <= (1 << 23)) ||
+                             !dev->irq_enabled));
 
                 if (ret != -EINTR) {
                         struct timeval now;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 62a4bf7b49df..bbadf1c04142 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -177,6 +177,14 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
         drm_i915_private_t *dev_priv = dev->dev_private;
         struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
 
+        master_priv->sarea = drm_getsarea(dev);
+        if (master_priv->sarea) {
+                master_priv->sarea_priv = (drm_i915_sarea_t *)
+                        ((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
+        } else {
+                DRM_DEBUG("sarea not found assuming DRI2 userspace\n");
+        }
+
         if (init->ring_size != 0) {
                 if (dev_priv->ring.ring_obj != NULL) {
                         i915_dma_cleanup(dev);
@@ -1152,6 +1160,8 @@ int i915_driver_unload(struct drm_device *dev)
         if (drm_core_check_feature(dev, DRIVER_MODESET)) {
                 intel_modeset_cleanup(dev);
 
+                i915_gem_free_all_phys_object(dev);
+
                 mutex_lock(&dev->struct_mutex);
                 i915_gem_cleanup_ringbuffer(dev);
                 mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 563de18063fd..e13518252007 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -72,6 +72,18 @@ enum pipe {
 #define WATCH_INACTIVE  0
 #define WATCH_PWRITE    0
 
+#define I915_GEM_PHYS_CURSOR_0 1
+#define I915_GEM_PHYS_CURSOR_1 2
+#define I915_GEM_PHYS_OVERLAY_REGS 3
+#define I915_MAX_PHYS_OBJECT (I915_GEM_PHYS_OVERLAY_REGS)
+
+struct drm_i915_gem_phys_object {
+        int id;
+        struct page **page_list;
+        drm_dma_handle_t *handle;
+        struct drm_gem_object *cur_obj;
+};
+
 typedef struct _drm_i915_ring_buffer {
         int tail_mask;
         unsigned long Size;
@@ -358,6 +370,9 @@ typedef struct drm_i915_private {
                 uint32_t bit_6_swizzle_x;
                 /** Bit 6 swizzling required for Y tiling */
                 uint32_t bit_6_swizzle_y;
+
+                /* storage for physical objects */
+                struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
         } mm;
 } drm_i915_private_t;
 
@@ -436,6 +451,9 @@ struct drm_i915_gem_object {
         /** User space pin count and filp owning the pin */
         uint32_t user_pin_count;
         struct drm_file *pin_filp;
+
+        /** for phy allocated objects */
+        struct drm_i915_gem_phys_object *phys_obj;
 };
 
 /**
@@ -598,6 +616,11 @@ int i915_gem_do_init(struct drm_device *dev, unsigned long start,
 int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
 int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
                                       int write);
+int i915_gem_attach_phys_object(struct drm_device *dev,
+                                struct drm_gem_object *obj, int id);
+void i915_gem_detach_phys_object(struct drm_device *dev,
+                                 struct drm_gem_object *obj);
+void i915_gem_free_all_phys_object(struct drm_device *dev);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 1384d6686555..96316fd47233 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -55,6 +55,9 @@ static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
 static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
 static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
 static int i915_gem_evict_something(struct drm_device *dev);
+static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
+                                struct drm_i915_gem_pwrite *args,
+                                struct drm_file *file_priv);
 
 int i915_gem_do_init(struct drm_device *dev, unsigned long start,
                      unsigned long end)
@@ -386,8 +389,10 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
          * pread/pwrite currently are reading and writing from the CPU
          * perspective, requiring manual detiling by the client.
          */
-        if (obj_priv->tiling_mode == I915_TILING_NONE &&
-            dev->gtt_total != 0)
+        if (obj_priv->phys_obj)
+                ret = i915_gem_phys_pwrite(dev, obj, args, file_priv);
+        else if (obj_priv->tiling_mode == I915_TILING_NONE &&
+                 dev->gtt_total != 0)
                 ret = i915_gem_gtt_pwrite(dev, obj, args, file_priv);
         else
                 ret = i915_gem_shmem_pwrite(dev, obj, args, file_priv);
@@ -2858,6 +2863,9 @@ void i915_gem_free_object(struct drm_gem_object *obj)
         while (obj_priv->pin_count > 0)
                 i915_gem_object_unpin(obj);
 
+        if (obj_priv->phys_obj)
+                i915_gem_detach_phys_object(dev, obj);
+
         i915_gem_object_unbind(obj);
 
         list = &obj->map_list;
@@ -3293,3 +3301,180 @@ i915_gem_load(struct drm_device *dev)
 
         i915_gem_detect_bit_6_swizzle(dev);
 }
+
+/*
+ * Create a physically contiguous memory object for this object
+ * e.g. for cursor + overlay regs
+ */
+int i915_gem_init_phys_object(struct drm_device *dev,
+                              int id, int size)
+{
+        drm_i915_private_t *dev_priv = dev->dev_private;
+        struct drm_i915_gem_phys_object *phys_obj;
+        int ret;
+
+        if (dev_priv->mm.phys_objs[id - 1] || !size)
+                return 0;
+
+        phys_obj = drm_calloc(1, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER);
+        if (!phys_obj)
+                return -ENOMEM;
+
+        phys_obj->id = id;
+
+        phys_obj->handle = drm_pci_alloc(dev, size, 0, 0xffffffff);
+        if (!phys_obj->handle) {
+                ret = -ENOMEM;
+                goto kfree_obj;
+        }
+#ifdef CONFIG_X86
+        set_memory_wc((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
+#endif
+
+        dev_priv->mm.phys_objs[id - 1] = phys_obj;
+
+        return 0;
+kfree_obj:
+        drm_free(phys_obj, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER);
+        return ret;
+}
+
+void i915_gem_free_phys_object(struct drm_device *dev, int id)
+{
+        drm_i915_private_t *dev_priv = dev->dev_private;
+        struct drm_i915_gem_phys_object *phys_obj;
+
+        if (!dev_priv->mm.phys_objs[id - 1])
+                return;
+
+        phys_obj = dev_priv->mm.phys_objs[id - 1];
+        if (phys_obj->cur_obj) {
+                i915_gem_detach_phys_object(dev, phys_obj->cur_obj);
+        }
+
+#ifdef CONFIG_X86
+        set_memory_wb((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
+#endif
+        drm_pci_free(dev, phys_obj->handle);
+        kfree(phys_obj);
+        dev_priv->mm.phys_objs[id - 1] = NULL;
+}
+
+void i915_gem_free_all_phys_object(struct drm_device *dev)
+{
+        int i;
+
+        for (i = 0; i < I915_MAX_PHYS_OBJECT; i++)
+                i915_gem_free_phys_object(dev, i);
+}
+
+void i915_gem_detach_phys_object(struct drm_device *dev,
+                                 struct drm_gem_object *obj)
+{
+        struct drm_i915_gem_object *obj_priv;
+        int i;
+        int ret;
+        int page_count;
+
+        obj_priv = obj->driver_private;
+        if (!obj_priv->phys_obj)
+                return;
+
+        ret = i915_gem_object_get_page_list(obj);
+        if (ret)
+                goto out;
+
+        page_count = obj->size / PAGE_SIZE;
+
+        for (i = 0; i < page_count; i++) {
+                char *dst = kmap_atomic(obj_priv->page_list[i], KM_USER0);
+                char *src = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE);
+
+                memcpy(dst, src, PAGE_SIZE);
+                kunmap_atomic(dst, KM_USER0);
+        }
+        drm_clflush_pages(obj_priv->page_list, page_count);
+        drm_agp_chipset_flush(dev);
+out:
+        obj_priv->phys_obj->cur_obj = NULL;
+        obj_priv->phys_obj = NULL;
+}
+
+int
+i915_gem_attach_phys_object(struct drm_device *dev,
+                            struct drm_gem_object *obj, int id)
+{
+        drm_i915_private_t *dev_priv = dev->dev_private;
+        struct drm_i915_gem_object *obj_priv;
+        int ret = 0;
+        int page_count;
+        int i;
+
+        if (id > I915_MAX_PHYS_OBJECT)
+                return -EINVAL;
+
+        obj_priv = obj->driver_private;
+
+        if (obj_priv->phys_obj) {
+                if (obj_priv->phys_obj->id == id)
+                        return 0;
+                i915_gem_detach_phys_object(dev, obj);
+        }
+
+
+        /* create a new object */
+        if (!dev_priv->mm.phys_objs[id - 1]) {
+                ret = i915_gem_init_phys_object(dev, id,
+                                                obj->size);
+                if (ret) {
+                        DRM_ERROR("failed to init phys object %d size: %d\n", id, obj->size);
+                        goto out;
+                }
+        }
+
+        /* bind to the object */
+        obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1];
+        obj_priv->phys_obj->cur_obj = obj;
+
+        ret = i915_gem_object_get_page_list(obj);
+        if (ret) {
+                DRM_ERROR("failed to get page list\n");
+                goto out;
+        }
+
+        page_count = obj->size / PAGE_SIZE;
+
+        for (i = 0; i < page_count; i++) {
+                char *src = kmap_atomic(obj_priv->page_list[i], KM_USER0);
+                char *dst = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE);
+
+                memcpy(dst, src, PAGE_SIZE);
+                kunmap_atomic(src, KM_USER0);
+        }
+
+        return 0;
+out:
+        return ret;
+}
+
+static int
+i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
+                     struct drm_i915_gem_pwrite *args,
+                     struct drm_file *file_priv)
+{
+        struct drm_i915_gem_object *obj_priv = obj->driver_private;
+        void *obj_addr;
+        int ret;
+        char __user *user_data;
+
+        user_data = (char __user *) (uintptr_t) args->data_ptr;
+        obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
+
+        DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size);
+        ret = copy_from_user(obj_addr, user_data, args->size);
+        if (ret)
+                return -EFAULT;
+
+        drm_agp_chipset_flush(dev);
+        return 0;
+}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 0cadafbef411..6290219de6c8 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -411,6 +411,12 @@ int i915_enable_vblank(struct drm_device *dev, int pipe)
 {
         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
         unsigned long irqflags;
+        int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+        u32 pipeconf;
+
+        pipeconf = I915_READ(pipeconf_reg);
+        if (!(pipeconf & PIPEACONF_ENABLE))
+                return -EINVAL;
 
         spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
         if (IS_I965G(dev))
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8ccb9c3ab868..31c3732b7a69 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -401,6 +401,8 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
         I915_WRITE(dspstride, crtc->fb->pitch);
 
         dspcntr = I915_READ(dspcntr_reg);
+        /* Mask out pixel format bits in case we change it */
+        dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
         switch (crtc->fb->bits_per_pixel) {
         case 8:
                 dspcntr |= DISPPLANE_8BPP;
@@ -1014,21 +1016,25 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 
         if (bo->size < width * height * 4) {
                 DRM_ERROR("buffer is to small\n");
-                drm_gem_object_unreference(bo);
-                return -ENOMEM;
+                ret = -ENOMEM;
+                goto fail;
         }
 
-        if (dev_priv->cursor_needs_physical) {
-                addr = dev->agp->base + obj_priv->gtt_offset;
-        } else {
+        /* we only need to pin inside GTT if cursor is non-phy */
+        if (!dev_priv->cursor_needs_physical) {
+                ret = i915_gem_object_pin(bo, PAGE_SIZE);
+                if (ret) {
+                        DRM_ERROR("failed to pin cursor bo\n");
+                        goto fail;
+                }
                 addr = obj_priv->gtt_offset;
-        }
-
-        ret = i915_gem_object_pin(bo, PAGE_SIZE);
-        if (ret) {
-                DRM_ERROR("failed to pin cursor bo\n");
-                drm_gem_object_unreference(bo);
-                return ret;
+        } else {
+                ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
+                if (ret) {
+                        DRM_ERROR("failed to attach phys object\n");
+                        goto fail;
+                }
+                addr = obj_priv->phys_obj->handle->busaddr;
         }
 
         temp = 0;
@@ -1041,14 +1047,25 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
         I915_WRITE(base, addr);
 
         if (intel_crtc->cursor_bo) {
-                i915_gem_object_unpin(intel_crtc->cursor_bo);
+                if (dev_priv->cursor_needs_physical) {
+                        if (intel_crtc->cursor_bo != bo)
+                                i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
+                } else
+                        i915_gem_object_unpin(intel_crtc->cursor_bo);
+                mutex_lock(&dev->struct_mutex);
                 drm_gem_object_unreference(intel_crtc->cursor_bo);
+                mutex_unlock(&dev->struct_mutex);
         }
 
         intel_crtc->cursor_addr = addr;
         intel_crtc->cursor_bo = bo;
 
         return 0;
+fail:
+        mutex_lock(&dev->struct_mutex);
+        drm_gem_object_unreference(bo);
+        mutex_unlock(&dev->struct_mutex);
+        return ret;
 }
 
 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index ccecfaf6307b..2fafdcc108fe 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -456,6 +456,13 @@ void intel_lvds_init(struct drm_device *dev)
                 dev_priv->panel_fixed_mode =
                         drm_mode_duplicate(dev, dev_priv->vbt_mode);
                 mutex_unlock(&dev->mode_config.mutex);
+                if (dev_priv->panel_fixed_mode) {
+                        dev_priv->panel_fixed_mode->type |=
+                                DRM_MODE_TYPE_PREFERRED;
+                        drm_mode_probed_add(connector,
+                                            dev_priv->panel_fixed_mode);
+                        goto out;
+                }
         }
 
         /*
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4b33bc82cc24..b84bf066879b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -189,6 +189,16 @@ config SENSORS_ADT7473
           This driver can also be built as a module. If so, the module
           will be called adt7473.
 
+config SENSORS_ADT7475
+        tristate "Analog Devices ADT7475"
+        depends on I2C && EXPERIMENTAL
+        help
+          If you say yes here you get support for the Analog Devices
+          ADT7475 hardware monitoring chips.
+
+          This driver can also be build as a module.  If so, the module
+          will be called adt7475.
+
 config SENSORS_K8TEMP
         tristate "AMD Athlon64/FX or Opteron temperature sensor"
         depends on X86 && PCI && EXPERIMENTAL
@@ -861,6 +871,8 @@ config SENSORS_HDAPS
 config SENSORS_LIS3LV02D
         tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
         depends on ACPI && INPUT
+        select NEW_LEDS
+        select LEDS_CLASS
         default n
         help
           This driver provides support for the LIS3LV02Dx accelerometer. In
@@ -872,10 +884,16 @@ config SENSORS_LIS3LV02D
           /sys/devices/platform/lis3lv02d.
 
           This driver also provides an absolute input class device, allowing
-          the laptop to act as a pinball machine-esque joystick.
+          the laptop to act as a pinball machine-esque joystick. On HP laptops,
+          if the led infrastructure is activated, support for a led indicating
+          disk protection will be provided as hp:red:hddprotection.
 
-          This driver can also be built as a module.  If so, the module
-          will be called lis3lv02d.
+          This driver can also be built as modules.  If so, the core module
+          will be called lis3lv02d and a specific module for HP laptops will be
+          called hp_accel.
+
+          Say Y here if you have an applicable laptop and want to experience
+          the awesome power of lis3lv02d.
 
 config SENSORS_APPLESMC
         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 19cb1ace3eb4..2e80f37f39eb 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -28,6 +28,8 @@ obj-$(CONFIG_SENSORS_ADS7828)	+= ads7828.o
 obj-$(CONFIG_SENSORS_ADT7462)   += adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)   += adt7470.o
 obj-$(CONFIG_SENSORS_ADT7473)   += adt7473.o
+obj-$(CONFIG_SENSORS_ADT7475)   += adt7475.o
+
 obj-$(CONFIG_SENSORS_APPLESMC)  += applesmc.o
 obj-$(CONFIG_SENSORS_AMS)       += ams/
 obj-$(CONFIG_SENSORS_ATXP1)     += atxp1.o
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 70bb854086df..e52b38806d03 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -279,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "OTES1 Fan",          36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0011, "AT8 32X(ATI RD580-ULI M1575)", {
+        { 0x0011, "AT8 32X", {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 20, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -402,7 +402,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 Fan",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0016, "AW9D-MAX       (Intel i975-ICH7)", {
+        { 0x0016, "AW9D-MAX", {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
@@ -482,7 +482,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 Fan",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0019, NULL /* Unknown, need DMI string */, {
+        { 0x0019, "IN9 32X MAX", {
                 { "CPU Core",            7, 0, 10, 1, 0 },
                 { "DDR2",               13, 0, 20, 1, 0 },
                 { "DDR2 VTT",           14, 0, 10, 1, 0 },
@@ -509,7 +509,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 FAN",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
+        { 0x001A, "IP35 Pro", {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
@@ -1128,6 +1128,7 @@ static int __init abituguru3_dmi_detect(void)
 {
         const char *board_vendor, *board_name;
         int i, err = (force) ? 1 : -ENODEV;
+        size_t sublen;
 
         board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
         if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
@@ -1137,9 +1138,20 @@ static int __init abituguru3_dmi_detect(void)
         if (!board_name)
                 return err;
 
+        /* At the moment, we don't care about the part of the vendor
+         * DMI string contained in brackets. Truncate the string at
+         * the first occurrence of a bracket. Trim any trailing space
+         * from the substring.
+         */
+        sublen = strcspn(board_name, "(");
+        while (sublen > 0 && board_name[sublen - 1] == ' ')
+                sublen--;
+
         for (i = 0; abituguru3_motherboards[i].id; i++) {
                 const char *dmi_name = abituguru3_motherboards[i].dmi_name;
-                if (dmi_name && !strcmp(dmi_name, board_name))
+                if (!dmi_name || strlen(dmi_name) != sublen)
+                        continue;
+                if (!strncasecmp(board_name, dmi_name, sublen))
                         break;
         }
 
@@ -1153,7 +1165,7 @@ static int __init abituguru3_dmi_detect(void)
 
 static inline int abituguru3_dmi_detect(void)
 {
-        return -ENODEV;
+        return 1;
 }
 
 #endif /* CONFIG_DMI */
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
new file mode 100644
index 000000000000..d39877a7da63
--- /dev/null
+++ b/drivers/hwmon/adt7475.c
@@ -0,0 +1,1221 @@
+/*
+ * adt7475 - Thermal sensor driver for the ADT7475 chip and derivatives
+ * Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
+ * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
+
+ * Derived from the lm83 driver by Jean Delvare
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+
+/* Indexes for the sysfs hooks */
+
+#define INPUT           0
+#define MIN             1
+#define MAX             2
+#define CONTROL         3
+#define OFFSET          3
+#define AUTOMIN         4
+#define THERM           5
+#define HYSTERSIS       6
+
+/* These are unique identifiers for the sysfs functions - unlike the
+   numbers above, these are not also indexes into an array
+*/
+
+#define ALARM           9
+#define FAULT           10
+
+/* 7475 Common Registers */
+
+#define REG_VOLTAGE_BASE        0x21
+#define REG_TEMP_BASE           0x25
+#define REG_TACH_BASE           0x28
+#define REG_PWM_BASE            0x30
+#define REG_PWM_MAX_BASE        0x38
+
+#define REG_DEVID               0x3D
+#define REG_VENDID              0x3E
+
+#define REG_STATUS1             0x41
+#define REG_STATUS2             0x42
+
+#define REG_VOLTAGE_MIN_BASE    0x46
+#define REG_VOLTAGE_MAX_BASE    0x47
+
+#define REG_TEMP_MIN_BASE       0x4E
+#define REG_TEMP_MAX_BASE       0x4F
+
+#define REG_TACH_MIN_BASE       0x54
+
+#define REG_PWM_CONFIG_BASE     0x5C
+
+#define REG_TEMP_TRANGE_BASE    0x5F
+
+#define REG_PWM_MIN_BASE        0x64
+
+#define REG_TEMP_TMIN_BASE      0x67
+#define REG_TEMP_THERM_BASE     0x6A
+
+#define REG_REMOTE1_HYSTERSIS   0x6D
+#define REG_REMOTE2_HYSTERSIS   0x6E
+
+#define REG_TEMP_OFFSET_BASE    0x70
+
+#define REG_EXTEND1             0x76
+#define REG_EXTEND2             0x77
+#define REG_CONFIG5             0x7C
+
+#define CONFIG5_TWOSCOMP        0x01
+#define CONFIG5_TEMPOFFSET      0x02
+
+/* ADT7475 Settings */
+
+#define ADT7475_VOLTAGE_COUNT   2
+#define ADT7475_TEMP_COUNT      3
+#define ADT7475_TACH_COUNT      4
+#define ADT7475_PWM_COUNT       3
+
+/* Macro to read the registers */
+
+#define adt7475_read(reg) i2c_smbus_read_byte_data(client, (reg))
+
+/* Macros to easily index the registers */
+
+#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2))
+#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2))
+
+#define PWM_REG(idx) (REG_PWM_BASE + (idx))
+#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx))
+#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx))
+#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx))
+
+#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx))
+#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2))
+#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2))
+
+#define TEMP_REG(idx) (REG_TEMP_BASE + (idx))
+#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2))
+#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2))
+#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx))
+#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx))
+#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
+#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
+
+static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD_1(adt7475);
+
+static const struct i2c_device_id adt7475_id[] = {
+        { "adt7475", adt7475 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, adt7475_id);
+
+struct adt7475_data {
+        struct device *hwmon_dev;
+        struct mutex lock;
+
+        unsigned long measure_updated;
+        unsigned long limits_updated;
+        char valid;
+
+        u8 config5;
+        u16 alarms;
+        u16 voltage[3][3];
+        u16 temp[7][3];
+        u16 tach[2][4];
+        u8 pwm[4][3];
+        u8 range[3];
+        u8 pwmctl[3];
+        u8 pwmchan[3];
+};
+
+static struct i2c_driver adt7475_driver;
+static struct adt7475_data *adt7475_update_device(struct device *dev);
+static void adt7475_read_hystersis(struct i2c_client *client);
+static void adt7475_read_pwm(struct i2c_client *client, int index);
+
+/* Given a temp value, convert it to register value */
+
+static inline u16 temp2reg(struct adt7475_data *data, long val)
+{
+        u16 ret;
+
+        if (!(data->config5 & CONFIG5_TWOSCOMP)) {
+                val = SENSORS_LIMIT(val, -64000, 191000);
+                ret = (val + 64500) / 1000;
+        } else {
+                val = SENSORS_LIMIT(val, -128000, 127000);
+                if (val < -500)
+                        ret = (256500 + val) / 1000;
+                else
+                        ret = (val + 500) / 1000;
+        }
+
+        return ret << 2;
+}
+
+/* Given a register value, convert it to a real temp value */
+
+static inline int reg2temp(struct adt7475_data *data, u16 reg)
+{
+        if (data->config5 & CONFIG5_TWOSCOMP) {
+                if (reg >= 512)
+                        return (reg - 1024) * 250;
+                else
+                        return reg * 250;
+        } else
+                return (reg - 256) * 250;
+}
+
+static inline int tach2rpm(u16 tach)
+{
+        if (tach == 0 || tach == 0xFFFF)
+                return 0;
+
+        return (90000 * 60) / tach;
+}
+
+static inline u16 rpm2tach(unsigned long rpm)
+{
+        if (rpm == 0)
+                return 0;
+
+        return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
+}
+
+static inline int reg2vcc(u16 reg)
+{
+        return (4296 * reg) / 1000;
+}
+
+static inline int reg2vccp(u16 reg)
+{
+        return (2929 * reg) / 1000;
+}
+
+static inline u16 vcc2reg(long vcc)
+{
+        vcc = SENSORS_LIMIT(vcc, 0, 4396);
+        return (vcc * 1000) / 4296;
+}
+
+static inline u16 vccp2reg(long vcc)
+{
+        vcc = SENSORS_LIMIT(vcc, 0, 2998);
+        return (vcc * 1000) / 2929;
+}
+
+static u16 adt7475_read_word(struct i2c_client *client, int reg)
+{
+        u16 val;
+
+        val = i2c_smbus_read_byte_data(client, reg);
+        val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8);
+
+        return val;
+}
+
+static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
+{
+        i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
+        i2c_smbus_write_byte_data(client, reg, val & 0xFF);
+}
+
+/* Find the nearest value in a table - used for pwm frequency and
+   auto temp range */
+static int find_nearest(long val, const int *array, int size)
+{
+        int i;
+
+        if (val < array[0])
+                return 0;
+
+        if (val > array[size - 1])
+                return size - 1;
+
+        for (i = 0; i < size - 1; i++) {
+                int a, b;
+
+                if (val > array[i + 1])
+                        continue;
+
+                a = val - array[i];
+                b = array[i + 1] - val;
+
+                return (a <= b) ? i : i + 1;
+        }
+
+        return 0;
+}
+
+static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
+                            char *buf)
+{
+        struct adt7475_data *data = adt7475_update_device(dev);
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        unsigned short val;
+
+        switch (sattr->nr) {
+        case ALARM:
+                return sprintf(buf, "%d\n",
+                               (data->alarms >> (sattr->index + 1)) & 1);
+        default:
+                val = data->voltage[sattr->nr][sattr->index];
+                return sprintf(buf, "%d\n",
+                               sattr->index ==
+                               0 ? reg2vccp(val) : reg2vcc(val));
+        }
+}
+
+static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
+                           const char *buf, size_t count)
+{
+
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        unsigned char reg;
+        long val;
+
+        if (strict_strtol(buf, 10, &val))
+                return -EINVAL;
+
+        mutex_lock(&data->lock);
+
+        data->voltage[sattr->nr][sattr->index] =
+                sattr->index ? vcc2reg(val) : vccp2reg(val);
+
+        if (sattr->nr == MIN)
+                reg = VOLTAGE_MIN_REG(sattr->index);
+        else
+                reg = VOLTAGE_MAX_REG(sattr->index);
+
+        i2c_smbus_write_byte_data(client, reg,
+                                  data->voltage[sattr->nr][sattr->index] >> 2);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+                         char *buf)
+{
+        struct adt7475_data *data = adt7475_update_device(dev);
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        int out;
+
+        switch (sattr->nr) {
+        case HYSTERSIS:
+                mutex_lock(&data->lock);
+                out = data->temp[sattr->nr][sattr->index];
+                if (sattr->index != 1)
+                        out = (out >> 4) & 0xF;
+                else
+                        out = (out & 0xF);
+                /* Show the value as an absolute number tied to
+                 * THERM */
+                out = reg2temp(data, data->temp[THERM][sattr->index]) -
+                        out * 1000;
+                mutex_unlock(&data->lock);
+                break;
+
+        case OFFSET:
+                /* Offset is always 2's complement, regardless of the
+                 * setting in CONFIG5 */
+                mutex_lock(&data->lock);
+                out = (s8)data->temp[sattr->nr][sattr->index];
+                if (data->config5 & CONFIG5_TEMPOFFSET)
+                        out *= 1000;
+                else
+                        out *= 500;
+                mutex_unlock(&data->lock);
+                break;
+
+        case ALARM:
+                out = (data->alarms >> (sattr->index + 4)) & 1;
+                break;
+
+        case FAULT:
+                /* Note - only for remote1 and remote2 */
+                out = data->alarms & (sattr->index ? 0x8000 : 0x4000);
+                out = out ? 0 : 1;
+                break;
+
+        default:
+                /* All other temp values are in the configured format */
+                out = reg2temp(data, data->temp[sattr->nr][sattr->index]);
+        }
+
+        return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
+                        const char *buf, size_t count)
+{
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        unsigned char reg = 0;
+        u8 out;
+        int temp;
+        long val;
+
+        if (strict_strtol(buf, 10, &val))
+                return -EINVAL;
+
+        mutex_lock(&data->lock);
+
+        /* We need the config register in all cases for temp <-> reg conv. */
+        data->config5 = adt7475_read(REG_CONFIG5);
+
+        switch (sattr->nr) {
+        case OFFSET:
+                if (data->config5 & CONFIG5_TEMPOFFSET) {
+                        val = SENSORS_LIMIT(val, -63000, 127000);
+                        out = data->temp[OFFSET][sattr->index] = val / 1000;
+                } else {
+                        val = SENSORS_LIMIT(val, -63000, 64000);
+                        out = data->temp[OFFSET][sattr->index] = val / 500;
+                }
+                break;
+
+        case HYSTERSIS:
+                /* The value will be given as an absolute value, turn it
+                   into an offset based on THERM */
+
+                /* Read fresh THERM and HYSTERSIS values from the chip */
+                data->temp[THERM][sattr->index] =
+                        adt7475_read(TEMP_THERM_REG(sattr->index)) << 2;
+                adt7475_read_hystersis(client);
+
+                temp = reg2temp(data, data->temp[THERM][sattr->index]);
+                val = SENSORS_LIMIT(val, temp - 15000, temp);
+                val = (temp - val) / 1000;
+
+                if (sattr->index != 1) {
+                        data->temp[HYSTERSIS][sattr->index] &= 0xF0;
+                        data->temp[HYSTERSIS][sattr->index] |= (val & 0xF) << 4;
+                } else {
+                        data->temp[HYSTERSIS][sattr->index] &= 0x0F;
+                        data->temp[HYSTERSIS][sattr->index] |= (val & 0xF);
+                }
+
+                out = data->temp[HYSTERSIS][sattr->index];
+                break;
+
+        default:
+                data->temp[sattr->nr][sattr->index] = temp2reg(data, val);
+
+                /* We maintain an extra 2 digits of precision for simplicity
+                 * - shift those back off before writing the value */
+                out = (u8) (data->temp[sattr->nr][sattr->index] >> 2);
+        }
+
+        switch (sattr->nr) {
+        case MIN:
+                reg = TEMP_MIN_REG(sattr->index);
+                break;
+        case MAX:
+                reg = TEMP_MAX_REG(sattr->index);
+                break;
+        case OFFSET:
+                reg = TEMP_OFFSET_REG(sattr->index);
+                break;
+        case AUTOMIN:
+                reg = TEMP_TMIN_REG(sattr->index);
+                break;
+        case THERM:
+                reg = TEMP_THERM_REG(sattr->index);
+                break;
+        case HYSTERSIS:
+                if (sattr->index != 2)
+                        reg = REG_REMOTE1_HYSTERSIS;
+                else
+                        reg = REG_REMOTE2_HYSTERSIS;
+
+                break;
+        }
+
+        i2c_smbus_write_byte_data(client, reg, out);
+
+        mutex_unlock(&data->lock);
+        return count;
+}
+
+/* Table of autorange values - the user will write the value in millidegrees,
+   and we'll convert it */
+static const int autorange_table[] = {
+        2000, 2500, 3330, 4000, 5000, 6670, 8000,
+        10000, 13330, 16000, 20000, 26670, 32000, 40000,
+        53330, 80000
+};
+
+static ssize_t show_point2(struct device *dev, struct device_attribute *attr,
+                           char *buf)
+{
+        struct adt7475_data *data = adt7475_update_device(dev);
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        int out, val;
+
+        mutex_lock(&data->lock);
+        out = (data->range[sattr->index] >> 4) & 0x0F;
+        val = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+        mutex_unlock(&data->lock);
+
+        return sprintf(buf, "%d\n", val + autorange_table[out]);
+}
+
+static ssize_t set_point2(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        int temp;
+        long val;
+
+        if (strict_strtol(buf, 10, &val))
+                return -EINVAL;
+
+        mutex_lock(&data->lock);
+
+        /* Get a fresh copy of the needed registers */
+        data->config5 = adt7475_read(REG_CONFIG5);
+        data->temp[AUTOMIN][sattr->index] =
+                adt7475_read(TEMP_TMIN_REG(sattr->index)) << 2;
+        data->range[sattr->index] =
+                adt7475_read(TEMP_TRANGE_REG(sattr->index));
+
+        /* The user will write an absolute value, so subtract the start point
+           to figure the range */
+        temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+        val = SENSORS_LIMIT(val, temp + autorange_table[0],
+                temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]);
+        val -= temp;
+
+        /* Find the nearest table entry to what the user wrote */
+        val = find_nearest(val, autorange_table, ARRAY_SIZE(autorange_table));
+
+        data->range[sattr->index] &= ~0xF0;
+        data->range[sattr->index] |= val << 4;
+
+        i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+                                  data->range[sattr->index]);
+
+        mutex_unlock(&data->lock);
+        return count;
+}
+
+static ssize_t show_tach(struct device *dev, struct device_attribute *attr,
+                         char *buf)
+{
+        struct adt7475_data *data = adt7475_update_device(dev);
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        int out;
+
+        if (sattr->nr == ALARM)
+                out = (data->alarms >> (sattr->index + 10)) & 1;
+        else
+                out = tach2rpm(data->tach[sattr->nr][sattr->index]);
+
+        return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t set_tach(struct device *dev, struct device_attribute *attr,
+                        const char *buf, size_t count)
+{
+
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        unsigned long val;
+
+        if (strict_strtoul(buf, 10, &val))
+                return -EINVAL;
+
+        mutex_lock(&data->lock);
+
+        data->tach[MIN][sattr->index] = rpm2tach(val);
+
+        adt7475_write_word(client, TACH_MIN_REG(sattr->index),
+                           data->tach[MIN][sattr->index]);
+
+        mutex_unlock(&data->lock);
+        return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+                        char *buf)
+{
+        struct adt7475_data *data = adt7475_update_device(dev);
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+        return sprintf(buf, "%d\n", data->pwm[sattr->nr][sattr->index]);
+}
+
+static ssize_t show_pwmchan(struct device *dev, struct device_attribute *attr,
+                            char *buf)
+{
+        struct adt7475_data *data = adt7475_update_device(dev);
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+        return sprintf(buf, "%d\n", data->pwmchan[sattr->index]);
+}
+
+static ssize_t show_pwmctrl(struct device *dev, struct device_attribute *attr,
+                            char *buf)
+{
+        struct adt7475_data *data = adt7475_update_device(dev);
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+        return sprintf(buf, "%d\n", data->pwmctl[sattr->index]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+                       const char *buf, size_t count)
+{
+
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        unsigned char reg = 0;
+        long val;
+
+        if (strict_strtol(buf, 10, &val))
+                return -EINVAL;
+
+        mutex_lock(&data->lock);
+
+        switch (sattr->nr) {
+        case INPUT:
+                /* Get a fresh value for CONTROL */
+                data->pwm[CONTROL][sattr->index] =
+                        adt7475_read(PWM_CONFIG_REG(sattr->index));
+
+                /* If we are not in manual mode, then we shouldn't allow
+                 * the user to set the pwm speed */
+                if (((data->pwm[CONTROL][sattr->index] >> 5) & 7) != 7) {
+                        mutex_unlock(&data->lock);
+                        return count;
+                }
+
+                reg = PWM_REG(sattr->index);
+                break;
+
+        case MIN:
+                reg = PWM_MIN_REG(sattr->index);
+                break;
+
+        case MAX:
+                reg = PWM_MAX_REG(sattr->index);
+                break;
+        }
+
+        data->pwm[sattr->nr][sattr->index] = SENSORS_LIMIT(val, 0, 0xFF);
+        i2c_smbus_write_byte_data(client, reg,
+                                  data->pwm[sattr->nr][sattr->index]);
+
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+/* Called by set_pwmctrl and set_pwmchan */
+
+static int hw_set_pwm(struct i2c_client *client, int index,
+                      unsigned int pwmctl, unsigned int pwmchan)
+{
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        long val = 0;
+
+        switch (pwmctl) {
+        case 0:
+                val = 0x03;     /* Run at full speed */
+                break;
+        case 1:
+                val = 0x07;     /* Manual mode */
+                break;
+        case 2:
+                switch (pwmchan) {
+                case 1:
+                        /* Remote1 controls PWM */
+                        val = 0x00;
+                        break;
+                case 2:
+                        /* local controls PWM */
+                        val = 0x01;
+                        break;
+                case 4:
+                        /* remote2 controls PWM */
+                        val = 0x02;
+                        break;
+                case 6:
+                        /* local/remote2 control PWM */
+                        val = 0x05;
+                        break;
+                case 7:
+                        /* All three control PWM */
+                        val = 0x06;
+                        break;
+                default:
+                        return -EINVAL;
+                }
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        data->pwmctl[index] = pwmctl;
+        data->pwmchan[index] = pwmchan;
+
+        data->pwm[CONTROL][index] &= ~0xE0;
+        data->pwm[CONTROL][index] |= (val & 7) << 5;
+
+        i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+                                  data->pwm[CONTROL][index]);
+
+        return 0;
+}
+
+static ssize_t set_pwmchan(struct device *dev, struct device_attribute *attr,
+                           const char *buf, size_t count)
+{
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        int r;
+        long val;
+
+        if (strict_strtol(buf, 10, &val))
+                return -EINVAL;
+
+        mutex_lock(&data->lock);
+        /* Read Modify Write PWM values */
+        adt7475_read_pwm(client, sattr->index);
+        r = hw_set_pwm(client, sattr->index, data->pwmctl[sattr->index], val);
+        if (r)
+                count = r;
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr,
+                           const char *buf, size_t count)
+{
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        int r;
+        long val;
+
+        if (strict_strtol(buf, 10, &val))
+                return -EINVAL;
+
+        mutex_lock(&data->lock);
+        /* Read Modify Write PWM values */
+        adt7475_read_pwm(client, sattr->index);
+        r = hw_set_pwm(client, sattr->index, val, data->pwmchan[sattr->index]);
+        if (r)
+                count = r;
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+/* List of frequencies for the PWM */
+static const int pwmfreq_table[] = {
+        11, 14, 22, 29, 35, 44, 58, 88
+};
+
+static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
+                            char *buf)
+{
+        struct adt7475_data *data = adt7475_update_device(dev);
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+        return sprintf(buf, "%d\n",
+                       pwmfreq_table[data->range[sattr->index] & 7]);
+}
+
+static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
+                           const char *buf, size_t count)
+{
+        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        int out;
+        long val;
+
+        if (strict_strtol(buf, 10, &val))
+                return -EINVAL;
+
+        out = find_nearest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table));
+
+        mutex_lock(&data->lock);
+
+        data->range[sattr->index] =
+                adt7475_read(TEMP_TRANGE_REG(sattr->index));
+        data->range[sattr->index] &= ~7;
+        data->range[sattr->index] |= out;
+
+        i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+                                  data->range[sattr->index]);
+
+        mutex_unlock(&data->lock);
+        return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MIN, 1);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+                            MAX, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+                            MIN, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
+                            set_temp, OFFSET, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO | S_IWUSR,
+                            show_temp, set_temp, AUTOMIN, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IRUGO | S_IWUSR,
+                            show_point2, set_point2, 0, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+                            THERM, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+                            set_temp, HYSTERSIS, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+                            MAX, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+                            MIN, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
+                            set_temp, OFFSET, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IRUGO | S_IWUSR,
+                            show_temp, set_temp, AUTOMIN, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IRUGO | S_IWUSR,
+                            show_point2, set_point2, 0, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+                            THERM, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+                            set_temp, HYSTERSIS, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+                            MAX, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+                            MIN, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
+                            set_temp, OFFSET, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_point1_temp, S_IRUGO | S_IWUSR,
+                            show_temp, set_temp, AUTOMIN, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_point2_temp, S_IRUGO | S_IWUSR,
+                            show_point2, set_point2, 0, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+                            THERM, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+                            set_temp, HYSTERSIS, 2);
+static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+                            MIN, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, show_tach, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_tach, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+                            MIN, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_alarm, S_IRUGO, show_tach, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_tach, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+                            MIN, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_tach, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_tach, NULL, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+                            MIN, 3);
+static SENSOR_DEVICE_ATTR_2(fan4_alarm, S_IRUGO, show_tach, NULL, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+                            0);
+static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+                            set_pwmfreq, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+                            set_pwmctrl, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_channel_temp, S_IRUGO | S_IWUSR,
+                            show_pwmchan, set_pwmchan, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+                            set_pwm, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+                            set_pwm, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+                            1);
+static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+                            set_pwmfreq, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+                            set_pwmctrl, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_channel_temp, S_IRUGO | S_IWUSR,
+                            show_pwmchan, set_pwmchan, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+                            set_pwm, MIN, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+                            set_pwm, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+                            2);
+static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+                            set_pwmfreq, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+                            set_pwmctrl, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_channel_temp, S_IRUGO | S_IWUSR,
+                            show_pwmchan, set_pwmchan, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+                            set_pwm, MIN, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+                            set_pwm, MAX, 2);
+
+static struct attribute *adt7475_attrs[] = {
+        &sensor_dev_attr_in1_input.dev_attr.attr,
+        &sensor_dev_attr_in1_max.dev_attr.attr,
+        &sensor_dev_attr_in1_min.dev_attr.attr,
+        &sensor_dev_attr_in1_alarm.dev_attr.attr,
+        &sensor_dev_attr_in2_input.dev_attr.attr,
+        &sensor_dev_attr_in2_max.dev_attr.attr,
+        &sensor_dev_attr_in2_min.dev_attr.attr,
+        &sensor_dev_attr_in2_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp1_input.dev_attr.attr,
+        &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp1_fault.dev_attr.attr,
+        &sensor_dev_attr_temp1_max.dev_attr.attr,
+        &sensor_dev_attr_temp1_min.dev_attr.attr,
+        &sensor_dev_attr_temp1_offset.dev_attr.attr,
+        &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_temp1_crit.dev_attr.attr,
+        &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+        &sensor_dev_attr_temp2_input.dev_attr.attr,
+        &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp2_max.dev_attr.attr,
+        &sensor_dev_attr_temp2_min.dev_attr.attr,
+        &sensor_dev_attr_temp2_offset.dev_attr.attr,
+        &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_temp2_crit.dev_attr.attr,
+        &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+        &sensor_dev_attr_temp3_input.dev_attr.attr,
+        &sensor_dev_attr_temp3_fault.dev_attr.attr,
+        &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp3_max.dev_attr.attr,
+        &sensor_dev_attr_temp3_min.dev_attr.attr,
+        &sensor_dev_attr_temp3_offset.dev_attr.attr,
+        &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_temp3_crit.dev_attr.attr,
+        &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+        &sensor_dev_attr_fan1_input.dev_attr.attr,
+        &sensor_dev_attr_fan1_min.dev_attr.attr,
+        &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan2_input.dev_attr.attr,
+        &sensor_dev_attr_fan2_min.dev_attr.attr,
+        &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan3_input.dev_attr.attr,
+        &sensor_dev_attr_fan3_min.dev_attr.attr,
+        &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan4_input.dev_attr.attr,
+        &sensor_dev_attr_fan4_min.dev_attr.attr,
+        &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+        &sensor_dev_attr_pwm1.dev_attr.attr,
+        &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_channel_temp.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm2.dev_attr.attr,
+        &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_channel_temp.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm3.dev_attr.attr,
+        &sensor_dev_attr_pwm3_freq.dev_attr.attr,
+        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_channel_temp.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+        NULL,
+};
+
+struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+
+static int adt7475_detect(struct i2c_client *client, int kind,
+                          struct i2c_board_info *info)
+{
+        struct i2c_adapter *adapter = client->adapter;
+
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                return -ENODEV;
+
+        if (kind <= 0) {
+                if (adt7475_read(REG_VENDID) != 0x41 ||
+                    adt7475_read(REG_DEVID) != 0x75) {
+                        dev_err(&adapter->dev,
+                                "Couldn't detect a adt7475 part at 0x%02x\n",
+                                (unsigned int)client->addr);
+                        return -ENODEV;
+                }
+        }
+
+        strlcpy(info->type, adt7475_id[0].name, I2C_NAME_SIZE);
+
+        return 0;
+}
+
+static int adt7475_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
+{
+        struct adt7475_data *data;
+        int i, ret = 0;
+
+        data = kzalloc(sizeof(*data), GFP_KERNEL);
+        if (data == NULL)
+                return -ENOMEM;
+
+        mutex_init(&data->lock);
+        i2c_set_clientdata(client, data);
+
+        /* Call adt7475_read_pwm for all pwm's as this will reprogram any
+           pwm's which are disabled to manual mode with 0% duty cycle */
+        for (i = 0; i < ADT7475_PWM_COUNT; i++)
+                adt7475_read_pwm(client, i);
+
+        ret = sysfs_create_group(&client->dev.kobj, &adt7475_attr_group);
+        if (ret)
+                goto efree;
+
+        data->hwmon_dev = hwmon_device_register(&client->dev);
+        if (IS_ERR(data->hwmon_dev)) {
+                ret = PTR_ERR(data->hwmon_dev);
+                goto eremove;
+        }
+
+        return 0;
+
+eremove:
+        sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+efree:
+        kfree(data);
+        return ret;
+}
+
+static int adt7475_remove(struct i2c_client *client)
+{
+        struct adt7475_data *data = i2c_get_clientdata(client);
+
+        hwmon_device_unregister(data->hwmon_dev);
+        sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+        kfree(data);
+
+        return 0;
+}
+
+static struct i2c_driver adt7475_driver = {
+        .class          = I2C_CLASS_HWMON,
+        .driver = {
+                .name   = "adt7475",
+        },
+        .probe          = adt7475_probe,
+        .remove         = adt7475_remove,
+        .id_table       = adt7475_id,
+        .detect         = adt7475_detect,
+        .address_data   = &addr_data,
+};
+
+static void adt7475_read_hystersis(struct i2c_client *client)
+{
+        struct adt7475_data *data = i2c_get_clientdata(client);
+
+        data->temp[HYSTERSIS][0] = (u16) adt7475_read(REG_REMOTE1_HYSTERSIS);
+        data->temp[HYSTERSIS][1] = data->temp[HYSTERSIS][0];
+        data->temp[HYSTERSIS][2] = (u16) adt7475_read(REG_REMOTE2_HYSTERSIS);
+}
+
+static void adt7475_read_pwm(struct i2c_client *client, int index)
+{
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        unsigned int v;
+
+        data->pwm[CONTROL][index] = adt7475_read(PWM_CONFIG_REG(index));
+
+        /* Figure out the internal value for pwmctrl and pwmchan
+           based on the current settings */
+        v = (data->pwm[CONTROL][index] >> 5) & 7;
+
+        if (v == 3)
+                data->pwmctl[index] = 0;
+        else if (v == 7)
+                data->pwmctl[index] = 1;
+        else if (v == 4) {
+                /* The fan is disabled - we don't want to
+                   support that, so change to manual mode and
+                   set the duty cycle to 0 instead
+                */
+                data->pwm[INPUT][index] = 0;
+                data->pwm[CONTROL][index] &= ~0xE0;
+                data->pwm[CONTROL][index] |= (7 << 5);
+
+                i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+                                          data->pwm[INPUT][index]);
+
+                i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+                                          data->pwm[CONTROL][index]);
+
+                data->pwmctl[index] = 1;
+        } else {
+                data->pwmctl[index] = 2;
+
+                switch (v) {
+                case 0:
+                        data->pwmchan[index] = 1;
+                        break;
+                case 1:
+                        data->pwmchan[index] = 2;
+                        break;
+                case 2:
+                        data->pwmchan[index] = 4;
+                        break;
+                case 5:
+                        data->pwmchan[index] = 6;
+                        break;
+                case 6:
+                        data->pwmchan[index] = 7;
+                        break;
+                }
+        }
+}
+
+static struct adt7475_data *adt7475_update_device(struct device *dev)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7475_data *data = i2c_get_clientdata(client);
+        u8 ext;
+        int i;
+
+        mutex_lock(&data->lock);
+
+        /* Measurement values update every 2 seconds */
+        if (time_after(jiffies, data->measure_updated + HZ * 2) ||
+            !data->valid) {
+                data->alarms = adt7475_read(REG_STATUS2) << 8;
+                data->alarms |= adt7475_read(REG_STATUS1);
+
+                ext = adt7475_read(REG_EXTEND1);
+                for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++)
+                        data->voltage[INPUT][i] =
+                                (adt7475_read(VOLTAGE_REG(i)) << 2) |
+                                ((ext >> ((i + 1) * 2)) & 3);
+
+                ext = adt7475_read(REG_EXTEND2);
+                for (i = 0; i < ADT7475_TEMP_COUNT; i++)
+                        data->temp[INPUT][i] =
+                                (adt7475_read(TEMP_REG(i)) << 2) |
+                                ((ext >> ((i + 1) * 2)) & 3);
+
+                for (i = 0; i < ADT7475_TACH_COUNT; i++)
+                        data->tach[INPUT][i] =
+                                adt7475_read_word(client, TACH_REG(i));
+
+                /* Updated by hw when in auto mode */
+                for (i = 0; i < ADT7475_PWM_COUNT; i++)
+                        data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
+
+                data->measure_updated = jiffies;
+        }
+
+        /* Limits and settings, should never change update every 60 seconds */
+        if (time_after(jiffies, data->limits_updated + HZ * 2) ||
+            !data->valid) {
+                data->config5 = adt7475_read(REG_CONFIG5);
+
+                for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+                        /* Adjust values so they match the input precision */
+                        data->voltage[MIN][i] =
+                                adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
+                        data->voltage[MAX][i] =
+                                adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
+                }
+
+                for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
+                        /* Adjust values so they match the input precision */
+                        data->temp[MIN][i] =
+                                adt7475_read(TEMP_MIN_REG(i)) << 2;
+                        data->temp[MAX][i] =
+                                adt7475_read(TEMP_MAX_REG(i)) << 2;
+                        data->temp[AUTOMIN][i] =
+                                adt7475_read(TEMP_TMIN_REG(i)) << 2;
+                        data->temp[THERM][i] =
+                                adt7475_read(TEMP_THERM_REG(i)) << 2;
+                        data->temp[OFFSET][i] =
+                                adt7475_read(TEMP_OFFSET_REG(i));
+                }
+                adt7475_read_hystersis(client);
+
+                for (i = 0; i < ADT7475_TACH_COUNT; i++)
+                        data->tach[MIN][i] =
+                                adt7475_read_word(client, TACH_MIN_REG(i));
+
+                for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+                        data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
+                        data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
+                        /* Set the channel and control information */
+                        adt7475_read_pwm(client, i);
+                }
+
+                data->range[0] = adt7475_read(TEMP_TRANGE_REG(0));
+                data->range[1] = adt7475_read(TEMP_TRANGE_REG(1));
+                data->range[2] = adt7475_read(TEMP_TRANGE_REG(2));
+
+                data->limits_updated = jiffies;
+                data->valid = 1;
+        }
+
+        mutex_unlock(&data->lock);
+
+        return data;
+}
+
+static int __init sensors_adt7475_init(void)
+{
+        return i2c_add_driver(&adt7475_driver);
+}
+
+static void __exit sensors_adt7475_exit(void)
+{
+        i2c_del_driver(&adt7475_driver);
+}
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("adt7475 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adt7475_init);
+module_exit(sensors_adt7475_exit);
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index dca47a591baf..e30186236588 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -590,6 +590,11 @@ static ssize_t applesmc_light_show(struct device *dev,
         }
 
         ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, buffer, data_length);
+        /* newer macbooks report a single 10-bit bigendian value */
+        if (data_length == 10) {
+                left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2;
+                goto out;
+        }
         left = buffer[2];
         if (ret)
                 goto out;
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index bf8d40580577..03705240000f 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2007-2008 Yan Burman
  *  Copyright (C) 2008 Eric Piel
- *  Copyright (C) 2008 Pavel Machek
+ *  Copyright (C) 2008-2009 Pavel Machek
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -36,6 +36,7 @@
 #include <linux/freezer.h>
 #include <linux/version.h>
 #include <linux/uaccess.h>
+#include <linux/leds.h>
 #include <acpi/acpi_drivers.h>
 #include <asm/atomic.h>
 #include "lis3lv02d.h"
@@ -43,6 +44,36 @@
 #define DRIVER_NAME     "lis3lv02d"
 #define ACPI_MDPS_CLASS "accelerometer"
 
+/* Delayed LEDs infrastructure ------------------------------------ */
+
+/* Special LED class that can defer work */
+struct delayed_led_classdev {
+        struct led_classdev led_classdev;
+        struct work_struct work;
+        enum led_brightness new_brightness;
+
+        unsigned int led;               /* For driver */
+        void (*set_brightness)(struct delayed_led_classdev *data, enum led_brightness value);
+};
+
+static inline void delayed_set_status_worker(struct work_struct *work)
+{
+        struct delayed_led_classdev *data =
+                        container_of(work, struct delayed_led_classdev, work);
+
+        data->set_brightness(data, data->new_brightness);
+}
+
+static inline void delayed_sysfs_set(struct led_classdev *led_cdev,
+                              enum led_brightness brightness)
+{
+        struct delayed_led_classdev *data = container_of(led_cdev,
+                             struct delayed_led_classdev, led_classdev);
+        data->new_brightness = brightness;
+        schedule_work(&data->work);
+}
+
+/* HP-specific accelerometer driver ------------------------------------ */
 
 /* For automatic insertion of the module */
 static struct acpi_device_id lis3lv02d_device_ids[] = {
@@ -154,10 +185,33 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
  */
 };
 
+static void hpled_set(struct delayed_led_classdev *led_cdev, enum led_brightness value)
+{
+        acpi_handle handle = adev.device->handle;
+        unsigned long long ret; /* Not used when writing */
+        union acpi_object in_obj[1];
+        struct acpi_object_list args = { 1, in_obj };
+
+        in_obj[0].type          = ACPI_TYPE_INTEGER;
+        in_obj[0].integer.value = !!value;
+
+        acpi_evaluate_integer(handle, "ALED", &args, &ret);
+}
+
+static struct delayed_led_classdev hpled_led = {
+        .led_classdev = {
+                .name                   = "hp::hddprotect",
+                .default_trigger        = "none",
+                .brightness_set         = delayed_sysfs_set,
+                .flags                  = LED_CORE_SUSPENDRESUME,
+        },
+        .set_brightness = hpled_set,
+};
 
 static int lis3lv02d_add(struct acpi_device *device)
 {
         u8 val;
+        int ret;
 
         if (!device)
                 return -EINVAL;
@@ -183,7 +237,19 @@ static int lis3lv02d_add(struct acpi_device *device)
                 adev.ac = lis3lv02d_axis_normal;
         }
 
-        return lis3lv02d_init_device(&adev);
+        INIT_WORK(&hpled_led.work, delayed_set_status_worker);
+        ret = led_classdev_register(NULL, &hpled_led.led_classdev);
+        if (ret)
+                return ret;
+
+        ret = lis3lv02d_init_device(&adev);
+        if (ret) {
+                flush_work(&hpled_led.work);
+                led_classdev_unregister(&hpled_led.led_classdev);
+                return ret;
+        }
+
+        return ret;
 }
 
 static int lis3lv02d_remove(struct acpi_device *device, int type)
@@ -194,6 +260,9 @@ static int lis3lv02d_remove(struct acpi_device *device, int type)
         lis3lv02d_joystick_disable();
         lis3lv02d_poweroff(device->handle);
 
+        flush_work(&hpled_led.work);
+        led_classdev_unregister(&hpled_led.led_classdev);
+
         return lis3lv02d_remove_fs();
 }
 
@@ -256,7 +325,7 @@ static void __exit lis3lv02d_exit_module(void)
         acpi_bus_unregister_driver(&lis3lv02d_driver);
 }
 
-MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS");
+MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS and support for disk protection LED.");
 MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index bd2bde0ef95e..1fe995111841 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -31,6 +31,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <asm/processor.h>
 
 #define TEMP_FROM_REG(val)      (((((val) >> 16) & 0xff) - 49) * 1000)
 #define REG_TEMP        0xe4
@@ -47,6 +48,8 @@ struct k8temp_data {
         /* registers values */
         u8 sensorsp;            /* sensor presence bits - SEL_CORE & SEL_PLACE */
         u32 temp[2][2];         /* core, place */
+        u8 swap_core_select;    /* meaning of SEL_CORE is inverted */
+        u32 temp_offset;
 };
 
 static struct k8temp_data *k8temp_update_device(struct device *dev)
@@ -114,10 +117,15 @@ static ssize_t show_temp(struct device *dev,
             to_sensor_dev_attr_2(devattr);
         int core = attr->nr;
         int place = attr->index;
+        int temp;
         struct k8temp_data *data = k8temp_update_device(dev);
 
-        return sprintf(buf, "%d\n",
-                       TEMP_FROM_REG(data->temp[core][place]));
+        if (data->swap_core_select)
+                core = core ? 0 : 1;
+
+        temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
+
+        return sprintf(buf, "%d\n", temp);
 }
 
 /* core, place */
@@ -141,20 +149,49 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
         int err;
         u8 scfg;
         u32 temp;
+        u8 model, stepping;
         struct k8temp_data *data;
-        u32 cpuid = cpuid_eax(1);
-
-        /* this feature should be available since SH-C0 core */
-        if ((cpuid == 0xf40) || (cpuid == 0xf50) || (cpuid == 0xf51)) {
-                err = -ENODEV;
-                goto exit;
-        }
 
         if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) {
                 err = -ENOMEM;
                 goto exit;
         }
 
+        model = boot_cpu_data.x86_model;
+        stepping = boot_cpu_data.x86_mask;
+
+        switch (boot_cpu_data.x86) {
+        case 0xf:
+                /* feature available since SH-C0, exclude older revisions */
+                if (((model == 4) && (stepping == 0)) ||
+                    ((model == 5) && (stepping <= 1))) {
+                        err = -ENODEV;
+                        goto exit_free;
+                }
+
+                /*
+                 * AMD NPT family 0fh, i.e. RevF and RevG:
+                 * meaning of SEL_CORE bit is inverted
+                 */
+                if (model >= 0x40) {
+                        data->swap_core_select = 1;
+                        dev_warn(&pdev->dev, "Temperature readouts might be "
+                                 "wrong - check erratum #141\n");
+                }
+
+                if ((model >= 0x69) &&
+                    !(model == 0xc1 || model == 0x6c || model == 0x7c)) {
+                        /*
+                         * RevG desktop CPUs (i.e. no socket S1G1 parts)
+                         * need additional offset, otherwise reported
+                         * temperature is below ambient temperature
+                         */
+                        data->temp_offset = 21000;
+                }
+
+                break;
+        }
+
         pci_read_config_byte(pdev, REG_TEMP, &scfg);
         scfg &= ~(SEL_PLACE | SEL_CORE);                /* Select sensor 0, core0 */
         pci_write_config_byte(pdev, REG_TEMP, scfg);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 59c3d23f5bdc..b9bef04b7be4 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -139,15 +139,4 @@ config SENSORS_TSL2550
           This driver can also be built as a module.  If so, the module
           will be called tsl2550.
 
-config MCU_MPC8349EMITX
-        tristate "MPC8349E-mITX MCU driver"
-        depends on I2C && PPC_83xx
-        select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-        help
-          Say Y here to enable soft power-off functionality on the Freescale
-          boards with the MPC8349E-mITX-compatible MCU chips. This driver will
-          also register MCU GPIOs with the generic GPIO API, so you'll able
-          to use MCU pins as GPIOs.
-
 endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 83accaaf8164..00fcb5193ac2 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)           += pcf8575.o
 obj-$(CONFIG_SENSORS_PCF8591)   += pcf8591.o
 obj-$(CONFIG_SENSORS_TSL2550)   += tsl2550.o
-obj-$(CONFIG_MCU_MPC8349EMITX)  += mcu_mpc8349emitx.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/drivers/i2c/chips/mcu_mpc8349emitx.c
deleted file mode 100644
index 82a9bcb858b6..000000000000
--- a/drivers/i2c/chips/mcu_mpc8349emitx.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU
- *
- * Copyright (c) 2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-
-/*
- * I don't have specifications for the MCU firmware, I found this register
- * and bits positions by the trial&error method.
- */
-#define MCU_REG_CTRL    0x20
-#define MCU_CTRL_POFF   0x40
-
-#define MCU_NUM_GPIO    2
-
-struct mcu {
-        struct mutex lock;
-        struct device_node *np;
-        struct i2c_client *client;
-        struct of_gpio_chip of_gc;
-        u8 reg_ctrl;
-};
-
-static struct mcu *glob_mcu;
-
-static void mcu_power_off(void)
-{
-        struct mcu *mcu = glob_mcu;
-
-        pr_info("Sending power-off request to the MCU...\n");
-        mutex_lock(&mcu->lock);
-        i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL,
-                                  mcu->reg_ctrl | MCU_CTRL_POFF);
-        mutex_unlock(&mcu->lock);
-}
-
-static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-        struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
-        struct mcu *mcu = container_of(of_gc, struct mcu, of_gc);
-        u8 bit = 1 << (4 + gpio);
-
-        mutex_lock(&mcu->lock);
-        if (val)
-                mcu->reg_ctrl &= ~bit;
-        else
-                mcu->reg_ctrl |= bit;
-
-        i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl);
-        mutex_unlock(&mcu->lock);
-}
-
-static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-        mcu_gpio_set(gc, gpio, val);
-        return 0;
-}
-
-static int mcu_gpiochip_add(struct mcu *mcu)
-{
-        struct device_node *np;
-        struct of_gpio_chip *of_gc = &mcu->of_gc;
-        struct gpio_chip *gc = &of_gc->gc;
-        int ret;
-
-        np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx");
-        if (!np)
-                return -ENODEV;
-
-        gc->owner = THIS_MODULE;
-        gc->label = np->full_name;
-        gc->can_sleep = 1;
-        gc->ngpio = MCU_NUM_GPIO;
-        gc->base = -1;
-        gc->set = mcu_gpio_set;
-        gc->direction_output = mcu_gpio_dir_out;
-        of_gc->gpio_cells = 2;
-        of_gc->xlate = of_gpio_simple_xlate;
-
-        np->data = of_gc;
-        mcu->np = np;
-
-        /*
-         * We don't want to lose the node, its ->data and ->full_name...
-         * So, if succeeded, we don't put the node here.
-         */
-        ret = gpiochip_add(gc);
-        if (ret)
-                of_node_put(np);
-        return ret;
-}
-
-static int mcu_gpiochip_remove(struct mcu *mcu)
-{
-        int ret;
-
-        ret = gpiochip_remove(&mcu->of_gc.gc);
-        if (ret)
-                return ret;
-        of_node_put(mcu->np);
-
-        return 0;
-}
-
-static int __devinit mcu_probe(struct i2c_client *client,
-                               const struct i2c_device_id *id)
-{
-        struct mcu *mcu;
-        int ret;
-
-        mcu = kzalloc(sizeof(*mcu), GFP_KERNEL);
-        if (!mcu)
-                return -ENOMEM;
-
-        mutex_init(&mcu->lock);
-        mcu->client = client;
-        i2c_set_clientdata(client, mcu);
-
-        ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
-        if (ret < 0)
-                goto err;
-        mcu->reg_ctrl = ret;
-
-        ret = mcu_gpiochip_add(mcu);
-        if (ret)
-                goto err;
-
-        /* XXX: this is potentially racy, but there is no lock for ppc_md */
-        if (!ppc_md.power_off) {
-                glob_mcu = mcu;
-                ppc_md.power_off = mcu_power_off;
-                dev_info(&client->dev, "will provide power-off service\n");
-        }
-
-        return 0;
-err:
-        kfree(mcu);
-        return ret;
-}
-
-static int __devexit mcu_remove(struct i2c_client *client)
-{
-        struct mcu *mcu = i2c_get_clientdata(client);
-        int ret;
-
-        if (glob_mcu == mcu) {
-                ppc_md.power_off = NULL;
-                glob_mcu = NULL;
-        }
-
-        ret = mcu_gpiochip_remove(mcu);
-        if (ret)
-                return ret;
-        i2c_set_clientdata(client, NULL);
-        kfree(mcu);
-        return 0;
-}
-
-static const struct i2c_device_id mcu_ids[] = {
-        { "mcu-mpc8349emitx", },
-        {},
-};
-MODULE_DEVICE_TABLE(i2c, mcu_ids);
-
-static struct i2c_driver mcu_driver = {
-        .driver = {
-                .name = "mcu-mpc8349emitx",
-                .owner = THIS_MODULE,
-        },
-        .probe = mcu_probe,
-        .remove = __devexit_p(mcu_remove),
-        .id_table = mcu_ids,
-};
-
-static int __init mcu_init(void)
-{
-        return i2c_add_driver(&mcu_driver);
-}
-module_init(mcu_init);
-
-static void __exit mcu_exit(void)
-{
-        i2c_del_driver(&mcu_driver);
-}
-module_exit(mcu_exit);
-
-MODULE_DESCRIPTION("Power Management and GPIO expander driver for "
-                   "MPC8349E-mITX-compatible MCU");
-MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3f9503867e6b..b1c6f68d98ce 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -701,11 +701,6 @@ config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
        depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
 endchoice
 
-config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
-       int "Maximum transfer size (KB) per request (up to 128)"
-       default "128"
-       depends on BLK_DEV_IDE_AU1XXX
-
 config BLK_DEV_IDE_TX4938
         tristate "TX4938 internal IDE support"
         depends on SOC_TX4938
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 4088a622873e..806760d24cef 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -633,7 +633,7 @@ static void ide_disk_setup(ide_drive_t *drive)
         printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
                 q->max_sectors / 2);
 
-        if (ata_id_is_ssd(id) || ata_id_is_cfa(id))
+        if (ata_id_is_ssd(id))
                 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
 
         /* calculate drive capacity, and select LBA if possible */
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index e728cfe7273f..753b92ebe0ae 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -493,7 +493,7 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti
         stat = tp_ops->read_status(hwif);
 
         if (stat & ATA_BUSY) {
-                local_irq_save(flags);
+                local_save_flags(flags);
                 local_irq_enable_in_hardirq();
                 timeout += jiffies;
                 while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 4b3bf6a06b70..60538d9c84ee 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -186,12 +186,10 @@ void ide_complete_pm_request(ide_drive_t *drive, struct request *rq)
                blk_pm_suspend_request(rq) ? "suspend" : "resume");
 #endif
         spin_lock_irqsave(q->queue_lock, flags);
-        if (blk_pm_suspend_request(rq)) {
+        if (blk_pm_suspend_request(rq))
                 blk_stop_queue(q);
-        } else {
+        else
                 drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
-                blk_start_queue(q);
-        }
         spin_unlock_irqrestore(q->queue_lock, flags);
 
         drive->hwif->rq = NULL;
@@ -219,6 +217,8 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
                  * point.
                  */
                 ide_hwif_t *hwif = drive->hwif;
+                struct request_queue *q = drive->queue;
+                unsigned long flags;
                 int rc;
 #ifdef DEBUG_PM
                 printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
@@ -231,5 +231,9 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
                 rc = ide_wait_not_busy(hwif, 100000);
                 if (rc)
                         printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+
+                spin_lock_irqsave(q->queue_lock, flags);
+                blk_start_queue(q);
+                spin_unlock_irqrestore(q->queue_lock, flags);
         }
 }
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 0ccbb4459fb9..312127ea443a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -796,7 +796,7 @@ static int ide_probe_port(ide_hwif_t *hwif)
         if (irqd)
                 disable_irq(hwif->irq);
 
-        local_irq_save(flags);
+        local_save_flags(flags);
         local_irq_enable_in_hardirq();
 
         if (ide_port_wait_ready(hwif) == -EBUSY)
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 0be27ac1f077..e1c4f5437396 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -68,6 +68,8 @@
 
 #define DRV_NAME "it821x"
 
+#define QUIRK_VORTEX86 1
+
 struct it821x_dev
 {
         unsigned int smart:1,           /* Are we in smart raid mode */
@@ -79,6 +81,7 @@ struct it821x_dev
         u16     pio[2];                 /* Cached PIO values */
         u16     mwdma[2];               /* Cached MWDMA values */
         u16     udma[2];                /* Cached UDMA values (per drive) */
+        u16     quirks;
 };
 
 #define ATA_66          0
@@ -557,8 +560,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
          *      this is necessary.
          */
 
-        pci_read_config_byte(dev, 0x08, &conf);
-        if (conf == 0x10) {
+        if (dev->revision == 0x10) {
                 idev->timing10 = 1;
                 hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
                 if (idev->smart == 0)
@@ -577,6 +579,12 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 
         hwif->ultra_mask = ATA_UDMA6;
         hwif->mwdma_mask = ATA_MWDMA2;
+
+        /* Vortex86SX quirk: prevent Ultra-DMA mode to fix BadCRC issue */
+        if (idev->quirks & QUIRK_VORTEX86) {
+                if (dev->revision == 0x11)
+                        hwif->ultra_mask = 0;
+        }
 }
 
 static void it8212_disable_raid(struct pci_dev *dev)
@@ -649,6 +657,8 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic
                 return -ENOMEM;
         }
 
+        itdevs->quirks = id->driver_data;
+
         rc = ide_pci_init_one(dev, &it821x_chipset, itdevs);
         if (rc)
                 kfree(itdevs);
@@ -668,6 +678,7 @@ static void __devexit it821x_remove(struct pci_dev *dev)
 static const struct pci_device_id it821x_pci_tbl[] = {
         { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 },
         { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 },
+        { PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), QUIRK_VORTEX86 },
         { 0, },
 };
 
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 48cc748c5043..6297956507c0 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -310,10 +310,6 @@ static const struct ide_port_info sl82c105_chipset __devinitdata = {
         .dma_ops        = &sl82c105_dma_ops,
         .host_flags     = IDE_HFLAG_IO_32BIT |
                           IDE_HFLAG_UNMASK_IRQS |
-/* FIXME: check for Compatibility mode in generic IDE PCI code */
-#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT)
-                          IDE_HFLAG_FORCE_LEGACY_IRQS |
-#endif
                           IDE_HFLAG_SERIALIZE_DMA |
                           IDE_HFLAG_NO_AUTODMA,
         .pio_mask       = ATA_PIO5,
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index b4ef218072cd..d9095345f7ca 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -202,7 +202,6 @@ static const struct ide_tp_ops tx4938ide_tp_ops = {
         .exec_command           = ide_exec_command,
         .read_status            = ide_read_status,
         .read_altstatus         = ide_read_altstatus,
-        .read_sff_dma_status    = ide_read_sff_dma_status,
 
         .set_irq                = ide_set_irq,
 
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index fecc0e03c3fc..703c3eeb20a8 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -432,8 +432,6 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
         if (via_clock < 20000 || via_clock > 50000) {
                 printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
                         "impossible (%d), using 33 MHz instead.\n", via_clock);
-                printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
-                        "to assume 80-wire cable.\n");
                 via_clock = 33333;
         }
 
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 7c5f97033b9f..cb8943da4f12 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -292,7 +292,9 @@ isdn_net_unbind_channel(isdn_net_local * lp)
         lp->dialstate = 0;
         dev->rx_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL;
         dev->st_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL;
-        isdn_free_channel(lp->isdn_device, lp->isdn_channel, ISDN_USAGE_NET);
+        if (lp->isdn_device != -1 && lp->isdn_channel != -1)
+                isdn_free_channel(lp->isdn_device, lp->isdn_channel,
+                                  ISDN_USAGE_NET);
         lp->flags &= ~ISDN_NET_CONNECTED;
         lp->isdn_device = -1;
         lp->isdn_channel = -1;
@@ -2513,7 +2515,6 @@ static const struct net_device_ops isdn_netdev_ops = {
         .ndo_stop             = isdn_net_close,
         .ndo_do_ioctl         = isdn_net_ioctl,
 
-        .ndo_validate_addr    = NULL,
         .ndo_start_xmit       = isdn_net_start_xmit,
         .ndo_get_stats        = isdn_net_get_stats,
         .ndo_tx_timeout       = isdn_net_tx_timeout,
@@ -2528,12 +2529,8 @@ static void _isdn_setup(struct net_device *dev)
 
         ether_setup(dev);
 
-        dev->flags = IFF_NOARP | IFF_POINTOPOINT;
         /* Setup the generic properties */
-        dev->mtu = 1500;
         dev->flags = IFF_NOARP|IFF_POINTOPOINT;
-        dev->type = ARPHRD_ETHER;
-        dev->addr_len = ETH_ALEN;
         dev->header_ops = NULL;
         dev->netdev_ops = &isdn_netdev_ops;
 
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a4a1ae214630..742713611bc5 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -119,13 +119,6 @@ config LEDS_GPIO
           outputs. To be useful the particular board must have LEDs
           and they must be connected to the GPIO lines.
 
-config LEDS_HP_DISK
-        tristate "LED Support for disk protection LED on HP notebooks"
-        depends on LEDS_CLASS && ACPI
-        help
-          This option enable support for disk protection LED, found on
-          newer HP notebooks.
-
 config LEDS_CLEVO_MAIL
         tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
         depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bc247cb02e82..9d76f0f160a4 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)                  += leds-fsg.o
 obj-$(CONFIG_LEDS_PCA955X)              += leds-pca955x.o
 obj-$(CONFIG_LEDS_DA903X)               += leds-da903x.o
-obj-$(CONFIG_LEDS_HP_DISK)              += leds-hp-disk.o
 obj-$(CONFIG_LEDS_WM8350)               += leds-wm8350.o
 
 # LED Triggers
diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c
deleted file mode 100644
index d786adc8c5e3..000000000000
--- a/drivers/leds/leds-hp-disk.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- *  leds-hp-disk.c - driver for HP "hard disk protection" LED
- *
- *  Copyright (C) 2008 Pavel Machek
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/kthread.h>
-#include <linux/leds.h>
-#include <acpi/acpi_drivers.h>
-
-#define DRIVER_NAME     "leds-hp-disk"
-#define ACPI_MDPS_CLASS "led"
-
-/* For automatic insertion of the module */
-static struct acpi_device_id hpled_device_ids[] = {
-        {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
-        {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, hpled_device_ids);
-
-struct acpi_hpled {
-        struct acpi_device      *device;   /* The ACPI device */
-};
-
-static struct acpi_hpled adev;
-
-static acpi_status hpled_acpi_write(acpi_handle handle, int reg)
-{
-        unsigned long long ret; /* Not used when writing */
-        union acpi_object in_obj[1];
-        struct acpi_object_list args = { 1, in_obj };
-
-        in_obj[0].type          = ACPI_TYPE_INTEGER;
-        in_obj[0].integer.value = reg;
-
-        return acpi_evaluate_integer(handle, "ALED", &args, &ret);
-}
-
-static void hpled_set(struct led_classdev *led_cdev,
-                               enum led_brightness value)
-{
-        hpled_acpi_write(adev.device->handle, !!value);
-}
-
-static struct led_classdev hpled_led = {
-        .name                   = "hp:red:hddprotection",
-        .default_trigger        = "heartbeat",
-        .brightness_set         = hpled_set,
-        .flags                  = LED_CORE_SUSPENDRESUME,
-};
-
-static int hpled_add(struct acpi_device *device)
-{
-        int ret;
-
-        if (!device)
-                return -EINVAL;
-
-        adev.device = device;
-        strcpy(acpi_device_name(device), DRIVER_NAME);
-        strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
-        device->driver_data = &adev;
-
-        ret = led_classdev_register(NULL, &hpled_led);
-        return ret;
-}
-
-static int hpled_remove(struct acpi_device *device, int type)
-{
-        if (!device)
-                return -EINVAL;
-
-        led_classdev_unregister(&hpled_led);
-        return 0;
-}
-
-
-
-static struct acpi_driver leds_hp_driver = {
-        .name  = DRIVER_NAME,
-        .class = ACPI_MDPS_CLASS,
-        .ids   = hpled_device_ids,
-        .ops = {
-                .add     = hpled_add,
-                .remove  = hpled_remove,
-        }
-};
-
-static int __init hpled_init_module(void)
-{
-        int ret;
-
-        if (acpi_disabled)
-                return -ENODEV;
-
-        ret = acpi_bus_register_driver(&leds_hp_driver);
-        if (ret < 0)
-                return ret;
-
-        printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
-
-        return 0;
-}
-
-static void __exit hpled_exit_module(void)
-{
-        acpi_bus_unregister_driver(&leds_hp_driver);
-}
-
-MODULE_DESCRIPTION("Driver for HP disk protection LED");
-MODULE_AUTHOR("Pavel Machek <pavel@suse.cz>");
-MODULE_LICENSE("GPL");
-
-module_init(hpled_init_module);
-module_exit(hpled_exit_module);
diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
index 10b6ef758725..11c0f461320e 100644
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Message independent structures and definitions
  *  Creation Date:  July 27, 2000
  *
- *    mpi.h Version:  01.05.13
+ *    mpi.h Version:  01.05.16
  *
  *  Version History
  *  ---------------
@@ -79,6 +79,9 @@
  *  03-27-06  01.05.11  Bumped MPI_HEADER_VERSION_UNIT.
  *  10-11-06  01.05.12  Bumped MPI_HEADER_VERSION_UNIT.
  *  05-24-07  01.05.13  Bumped MPI_HEADER_VERSION_UNIT.
+ *  08-07-07  01.05.14  Bumped MPI_HEADER_VERSION_UNIT.
+ *  01-15-08  01.05.15  Bumped MPI_HEADER_VERSION_UNIT.
+ *  03-28-08  01.05.16  Bumped MPI_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -109,7 +112,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */
 
 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x10)
+#define MPI_HEADER_VERSION_UNIT             (0x13)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index b2db3330c591..013c7d881948 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Config message, structures, and Pages
  *  Creation Date:  July 27, 2000
  *
- *    mpi_cnfg.h Version:  01.05.15
+ *    mpi_cnfg.h Version:  01.05.18
  *
  *  Version History
  *  ---------------
@@ -308,6 +308,20 @@
  *                      Expander Page 0 Flags field.
  *                      Fixed define for
  *                      MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ *  08-07-07  01.05.16  Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ *                      define.
+ *                      Added BIOS Page 4 structure.
+ *                      Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ *                      Physcial Disk Page 1.
+ *  01-15-07  01.05.17  Added additional bit defines for ExtFlags field of
+ *                      Manufacturing Page 4.
+ *                      Added Solid State Drives Supported bit to IOC Page 6
+ *                      Capabilities Flags.
+ *                      Added new value for AccessStatus field of SAS Device
+ *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
+ *  03-28-08  01.05.18  Defined new bits in Manufacturing Page 4 ExtFlags field
+ *                      to control coercion size and the mixing of SAS and SATA
+ *                      SSD drives.
  *  --------------------------------------------------------------------------
  */
 
@@ -686,6 +700,14 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA                 (0x01)
 
 /* defines for the ExtFlags field */
+#define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE        (0x0180)
+#define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE       (7)
+#define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE         (0)
+#define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE       (1)
+
+#define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA       (0x0040)
+#define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD       (0x0020)
+#define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT         (0x0010)
 #define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA      (0x0008)
 #define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE         (0x0004)
 #define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE        (0x0002)
@@ -1159,6 +1181,8 @@ typedef struct _CONFIG_PAGE_IOC_6
 
 /* IOC Page 6 Capabilities Flags */
 
+#define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT              (0x00000020)
+#define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT  (0x00000010)
 #define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING    (0x00000008)
 
 #define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE       (0x00000006)
@@ -1428,6 +1452,15 @@ typedef struct _CONFIG_PAGE_BIOS_2
 #define MPI_BIOSPAGE2_FORM_SAS_WWN                      (0x05)
 #define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT               (0x06)
 
+typedef struct _CONFIG_PAGE_BIOS_4
+{
+    CONFIG_PAGE_HEADER      Header;                     /* 00h */
+    U64                     ReassignmentBaseWWID;       /* 04h */
+} CONFIG_PAGE_BIOS_4, MPI_POINTER PTR_CONFIG_PAGE_BIOS_4,
+  BIOSPage4_t, MPI_POINTER pBIOSPage4_t;
+
+#define MPI_BIOSPAGE4_PAGEVERSION                       (0x00)
+
 
 /****************************************************************************
 *   SCSI Port Config Pages
@@ -2419,6 +2452,15 @@ typedef struct _RAID_PHYS_DISK1_PATH
 #define MPI_RAID_PHYSDISK1_FLAG_BROKEN          (0x0002)
 #define MPI_RAID_PHYSDISK1_FLAG_INVALID         (0x0001)
 
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength or NumPhysDiskPaths at runtime.
+ */
+#ifndef MPI_RAID_PHYS_DISK1_PATH_MAX
+#define MPI_RAID_PHYS_DISK1_PATH_MAX    (1)
+#endif
+
 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
 {
     CONFIG_PAGE_HEADER              Header;             /* 00h */
@@ -2426,7 +2468,7 @@ typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
     U8                              PhysDiskNum;        /* 05h */
     U16                             Reserved2;          /* 06h */
     U32                             Reserved1;          /* 08h */
-    RAID_PHYS_DISK1_PATH            Path[1];            /* 0Ch */
+    RAID_PHYS_DISK1_PATH            Path[MPI_RAID_PHYS_DISK1_PATH_MAX];/* 0Ch */
 } CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1,
   RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t;
 
@@ -2844,6 +2886,7 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_0
 #define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED            (0x01)
 #define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED      (0x02)
 #define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT   (0x03)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION   (0x04)
 /* specific values for SATA Init failures */
 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                 (0x10)
 #define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT    (0x11)
diff --git a/drivers/message/fusion/lsi/mpi_fc.h b/drivers/message/fusion/lsi/mpi_fc.h
index 627acfbb8623..7d663ce76f8c 100644
--- a/drivers/message/fusion/lsi/mpi_fc.h
+++ b/drivers/message/fusion/lsi/mpi_fc.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2004 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_fc.h
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 3f15fcfe4a2e..693e4b511354 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -3,28 +3,28 @@
  MPI Header File Change History
  ==============================
 
- Copyright (c) 2000-2007 LSI Corporation.
+ Copyright (c) 2000-2008 LSI Corporation.
 
  ---------------------------------------
- Header Set Release Version:    01.05.16
- Header Set Release Date:       05-24-07
+ Header Set Release Version:    01.05.19
+ Header Set Release Date:       03-28-08
  ---------------------------------------
 
  Filename               Current version     Prior version
  ----------             ---------------     -------------
- mpi.h                  01.05.13            01.05.12
- mpi_ioc.h              01.05.14            01.05.13
- mpi_cnfg.h             01.05.15            01.05.14
+ mpi.h                  01.05.16            01.05.15
+ mpi_ioc.h              01.05.16            01.05.15
+ mpi_cnfg.h             01.05.18            01.05.17
  mpi_init.h             01.05.09            01.05.09
  mpi_targ.h             01.05.06            01.05.06
  mpi_fc.h               01.05.01            01.05.01
  mpi_lan.h              01.05.01            01.05.01
- mpi_raid.h             01.05.03            01.05.03
+ mpi_raid.h             01.05.05            01.05.05
  mpi_tool.h             01.05.03            01.05.03
  mpi_inb.h              01.05.01            01.05.01
- mpi_sas.h              01.05.04            01.05.04
+ mpi_sas.h              01.05.05            01.05.05
  mpi_type.h             01.05.02            01.05.02
- mpi_history.txt        01.05.14            01.05.14
+ mpi_history.txt        01.05.19            01.05.18
 
 
  *  Date      Version   Description
@@ -96,6 +96,9 @@ mpi.h
  *  03-27-06  01.05.11  Bumped MPI_HEADER_VERSION_UNIT.
  *  10-11-06  01.05.12  Bumped MPI_HEADER_VERSION_UNIT.
  *  05-24-07  01.05.13  Bumped MPI_HEADER_VERSION_UNIT.
+ *  08-07-07  01.05.14  Bumped MPI_HEADER_VERSION_UNIT.
+ *  01-15-08  01.05.15  Bumped MPI_HEADER_VERSION_UNIT.
+ *  03-28-08  01.05.16  Bumped MPI_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
 
 mpi_ioc.h
@@ -127,7 +130,7 @@ mpi_ioc.h
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *                      New format for FWVersion and ProductId in
  *                      MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- *  08-31-01  01.02.02  Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ *  08-31-01  01.02.02  Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
  *                      related structure and defines.
  *                      Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
  *                      Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
@@ -187,7 +190,7 @@ mpi_ioc.h
  *  10-11-06  01.05.12  Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
  *                      Added MaxInitiators field to PortFacts reply.
  *                      Added SAS Device Status Change ReasonCode for
- *                      asynchronous notification.
+ *                      asynchronous notificaiton.
  *                      Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
  *                      data structure.
  *                      Added new ImageType values for FWDownload and FWUpload
@@ -199,6 +202,16 @@ mpi_ioc.h
  *                      added _MULTI_PORT_DOMAIN.
  *  05-24-07  01.05.14  Added Common Boot Block type to FWDownload Request.
  *                      Added Common Boot Block type to FWUpload Request.
+ *  08-07-07  01.05.15  Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ *                      Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ *                      MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ *                      Added SASAddress field to SAS Initiator Device Table
+ *                      Overflow event data structure.
+ *  03-28-08  01.05.16  Added two new ReasonCode values to SAS Device Status
+ *                      Change Event data to indicate completion of internally
+ *                      generated task management.
+ *                      Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ *                      Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
  *  --------------------------------------------------------------------------
 
 mpi_cnfg.h
@@ -213,7 +226,7 @@ mpi_cnfg.h
  *                      Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
  *                      page and updated the page version.
  *                      Added Information field and _INFO_PARAMS_NEGOTIATED
- *                      definition to SCSI_DEVICE_0 page.
+ *                      definitionto SCSI_DEVICE_0 page.
  *  06-22-00  01.00.03  Removed batch controls from LAN_0 page and updated the
  *                      page version.
  *                      Added BucketsRemaining to LAN_1 page, redefined the
@@ -496,6 +509,20 @@ mpi_cnfg.h
  *                      Expander Page 0 Flags field.
  *                      Fixed define for
  *                      MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ *  08-07-07  01.05.16  Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ *                      define.
+ *                      Added BIOS Page 4 structure.
+ *                      Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ *                      Physcial Disk Page 1.
+ *  01-15-07  01.05.17  Added additional bit defines for ExtFlags field of
+ *                      Manufacturing Page 4.
+ *                      Added Solid State Drives Supported bit to IOC Page 6
+ *                      Capabilities Flags.
+ *                      Added new value for AccessStatus field of SAS Device
+ *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
+ *  03-28-08  01.05.18  Defined new bits in Manufacturing Page 4 ExtFlags field
+ *                      to control coercion size and the mixing of SAS and SATA
+ *                      SSD drives.
  *  --------------------------------------------------------------------------
 
 mpi_init.h
@@ -661,6 +688,9 @@ mpi_raid.h
  *                      _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
  *  02-28-07  01.05.03  Added new RAID Action, Device FW Update Mode, and
  *                      associated defines.
+ *  08-07-07  01.05.04  Added Disable Full Rebuild bit to the ActionDataWord
+ *                      for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ *  01-15-08  01.05.05  Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
  *  --------------------------------------------------------------------------
 
 mpi_tool.h
@@ -694,6 +724,10 @@ mpi_sas.h
  *                      reply.
  *  10-11-06  01.05.04  Fixed the name of a define for Operation field of SAS IO
  *                      Unit Control request.
+ *  01-15-08  01.05.05  Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ *                      including adding IOCParameter and IOCParameter value
+ *                      fields to SAS IO Unit Control Request.
+ *                      Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
  *  --------------------------------------------------------------------------
 
 mpi_type.h
@@ -709,20 +743,20 @@ mpi_type.h
 
 mpi_history.txt         Parts list history
 
-Filename    01.05.15   01.05.15
-----------  --------   --------
-mpi.h       01.05.12   01.05.13
-mpi_ioc.h   01.05.13   01.05.14
-mpi_cnfg.h  01.05.14   01.05.15
-mpi_init.h  01.05.09   01.05.09
-mpi_targ.h  01.05.06   01.05.06
-mpi_fc.h    01.05.01   01.05.01
-mpi_lan.h   01.05.01   01.05.01
-mpi_raid.h  01.05.03   01.05.03
-mpi_tool.h  01.05.03   01.05.03
-mpi_inb.h   01.05.01   01.05.01
-mpi_sas.h   01.05.04   01.05.04
-mpi_type.h  01.05.02   01.05.02
+Filename    01.05.19   01.05.18   01.05.17   01.05.16   01.05.15
+----------  --------   --------   --------   --------   --------
+mpi.h       01.05.16   01.05.15   01.05.14   01.05.13   01.05.12
+mpi_ioc.h   01.05.16   01.05.15   01.05.15   01.05.14   01.05.13
+mpi_cnfg.h  01.05.18   01.05.17   01.05.16   01.05.15   01.05.14
+mpi_init.h  01.05.09   01.05.09   01.05.09   01.05.09   01.05.09
+mpi_targ.h  01.05.06   01.05.06   01.05.06   01.05.06   01.05.06
+mpi_fc.h    01.05.01   01.05.01   01.05.01   01.05.01   01.05.01
+mpi_lan.h   01.05.01   01.05.01   01.05.01   01.05.01   01.05.01
+mpi_raid.h  01.05.05   01.05.05   01.05.04   01.05.03   01.05.03
+mpi_tool.h  01.05.03   01.05.03   01.05.03   01.05.03   01.05.03
+mpi_inb.h   01.05.01   01.05.01   01.05.01   01.05.01   01.05.01
+mpi_sas.h   01.05.05   01.05.05   01.05.04   01.05.04   01.05.04
+mpi_type.h  01.05.02   01.05.02   01.05.02   01.05.02   01.05.02
 
 Filename    01.05.14   01.05.13   01.05.12   01.05.11   01.05.10   01.05.09
 ----------  --------   --------   --------   --------   --------   --------
diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h
index a9e3693601a7..4295d062caa7 100644
--- a/drivers/message/fusion/lsi/mpi_init.h
+++ b/drivers/message/fusion/lsi/mpi_init.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2007 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_init.h
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index 5cbb6bd048e1..8faa4fab7b89 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2007 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_ioc.h
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  August 11, 2000
  *
- *    mpi_ioc.h Version:  01.05.14
+ *    mpi_ioc.h Version:  01.05.16
  *
  *  Version History
  *  ---------------
@@ -113,6 +113,16 @@
  *                      added _MULTI_PORT_DOMAIN.
  *  05-24-07  01.05.14  Added Common Boot Block type to FWDownload Request.
  *                      Added Common Boot Block type to FWUpload Request.
+ *  08-07-07  01.05.15  Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ *                      Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ *                      MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ *                      Added SASAddress field to SAS Initiator Device Table
+ *                      Overflow event data structure.
+ *  03-28-08  01.05.16  Added two new ReasonCode values to SAS Device Status
+ *                      Change Event data to indicate completion of internally
+ *                      generated task management.
+ *                      Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ *                      Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
  *  --------------------------------------------------------------------------
  */
 
@@ -612,6 +622,8 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
 #define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL   (0x0B)
 #define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL       (0x0C)
 #define MPI_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION        (0x0D)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_INTERNAL_DEV_RESET   (0x0E)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_TASK_ABORT_INTERNAL  (0x0F)
 
 
 /* SCSI Event data for Queue Full event */
@@ -708,6 +720,8 @@ typedef struct _MPI_EVENT_DATA_IR2
 #define MPI_EVENT_IR2_RC_PD_REMOVED                 (0x05)
 #define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED       (0x06)
 #define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR       (0x07)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_ADDED            (0x08)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED          (0x09)
 
 /* defines for logical disk states */
 #define MPI_LD_STATE_OPTIMAL                        (0x00)
@@ -867,6 +881,7 @@ typedef struct _EVENT_DATA_DISCOVERY_ERROR
 #define MPI_EVENT_DSCVRY_ERR_DS_UNSUPPORTED_DEVICE          (0x00000800)
 #define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS            (0x00001000)
 #define MPI_EVENT_DSCVRY_ERR_DS_MULTI_PORT_DOMAIN           (0x00002000)
+#define MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE           (0x00004000)
 
 /* SAS SMP Error Event data */
 
@@ -902,6 +917,8 @@ typedef struct _EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE
 
 /* defines for the ReasonCode field of the SAS Initiator Device Status Change event */
 #define MPI_EVENT_SAS_INIT_RC_ADDED                 (0x01)
+#define MPI_EVENT_SAS_INIT_RC_REMOVED               (0x02)
+#define MPI_EVENT_SAS_INIT_RC_INACCESSIBLE          (0x03)
 
 /* SAS Initiator Device Table Overflow Event data */
 
@@ -910,6 +927,7 @@ typedef struct _EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
     U8                      MaxInit;                    /* 00h */
     U8                      CurrentInit;                /* 01h */
     U16                     Reserved1;                  /* 02h */
+    U64                     SASAddress;                 /* 04h */
 } EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
   MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
   MpiEventDataSasInitTableOverflow_t,
diff --git a/drivers/message/fusion/lsi/mpi_lan.h b/drivers/message/fusion/lsi/mpi_lan.h
index 03253b53b785..f41fcb69b359 100644
--- a/drivers/message/fusion/lsi/mpi_lan.h
+++ b/drivers/message/fusion/lsi/mpi_lan.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2004 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_lan.h
diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h
index e4dafcefeecd..face6e7acc72 100644
--- a/drivers/message/fusion/lsi/mpi_log_fc.h
+++ b/drivers/message/fusion/lsi/mpi_log_fc.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2001 LSI Corporation. All rights reserved.
+ *  Copyright (c) 2000-2008 LSI Corporation. All rights reserved.
  *
  *  NAME:           fc_log.h
  *  SUMMARY:        MPI IocLogInfo definitions for the SYMFC9xx chips
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index af9da03e95e5..691620dbedd2 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -1,6 +1,6 @@
 /***************************************************************************
  *                                                                         *
- *  Copyright 2003 LSI Corporation.  All rights reserved.            *
+ *  Copyright (c) 2000-2008 LSI Corporation.  All rights reserved.         *
  *                                                                         *
  * Description                                                             *
  * ------------                                                            *
@@ -73,6 +73,8 @@
 #define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO          (0x00070004)
 #define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ      (0x00070005)
 
+#define IOP_LOGINFO_CODE_LOG_TIMESTAMP_EVENT                 (0x00080000)
+
 /****************************************************************************/
 /* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL            */
 /****************************************************************************/
@@ -92,7 +94,7 @@
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP       (0x0000000C)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D              (0x0000000D)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL      (0x0000000E)
-#define PL_LOGINFO_SUB CODE_OPEN_FAIL_BAD_DEST               (0x00000011)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BAD_DEST               (0x00000011)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP          (0x00000012)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP          (0x00000013)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0      (0x00000014)
@@ -159,10 +161,11 @@
 
 #define PL_LOGINFO_SUB_CODE_INVALID_SGL                      (0x00000200)
 #define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH    (0x00000300)
-#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR                 (0x00000400) /* Bits 0-3 encode Transport Status Register (offset 0x08) */
-                                                                          /* Bit 0 is Status Bit 0: FrameXferErr */
-                                                                          /* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
-                                                                          /* Bit 3 is Status Bit 18 WriteDataLengthGTDataLengthErr */
+#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR                 (0x00000400)
+/* Bits 0-3 encode Transport Status Register (offset 0x08) */
+/* Bit 0 is Status Bit 0: FrameXferErr */
+/* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
+/* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
 
 #define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW              (0x00000500)
 #define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET      (0x00000600)
@@ -177,6 +180,11 @@
 #define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET       (0x00000E01)
 #define PL_LOGINFO_SUB_CODE_SECOND_OPEN                      (0x00000F00)
 #define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT         (0x00001000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_SATA_CONNECTION         (0x00002000)
+/* not currently used in mainline */
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK              (0x00003000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK_AIP          (0x00004000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD   (0x00005000)
 
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE          (0x00200000) /* Can't get SMP Frame */
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occured on SMP Read */
@@ -243,6 +251,8 @@
 #define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED               (0x00010014)
 /* Activation failed trying to import the volume */
 #define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED      (0x00010015)
+/* Activation failed trying to import the volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_PHYS_DISKS       (0x00010016)
 
 /* Phys Disk failed, too many phys disks */
 #define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS              (0x00010020)
@@ -285,6 +295,21 @@
 /* Compatibility Error : IME size limited to < 2TB */
 #define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D)
 
+/* Device Firmware Update: DFU can only be started once */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DFU_IN_PROGRESS            (0x00010050)
+/* Device Firmware Update: Volume must be Optimal/Active/non-Quiesced */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DEVICE_IN_INVALID_STATE    (0x00010051)
+/* Device Firmware Update: DFU Timeout cannot be zero */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_INVALID_TIMEOUT            (0x00010052)
+/* Device Firmware Update: CREATE TIMER FAILED */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_NO_TIMERS                  (0x00010053)
+/* Device Firmware Update: Failed to read SAS_IO_UNIT_PG_1 */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_READING_CFG_PAGE           (0x00010054)
+/* Device Firmware Update: Invalid SAS_IO_UNIT_PG_1 value(s) */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_PORT_IO_TIMEOUTS_REQUIRED  (0x00010055)
+/* Device Firmware Update: Unable to allocate memory for page */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_ALLOC_CFG_PAGE             (0x00010056)
+
 
 /****************************************************************************/
 /* Defines for convenience                                                  */
diff --git a/drivers/message/fusion/lsi/mpi_raid.h b/drivers/message/fusion/lsi/mpi_raid.h
index 2856108421d7..add60cc85be1 100644
--- a/drivers/message/fusion/lsi/mpi_raid.h
+++ b/drivers/message/fusion/lsi/mpi_raid.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2001-2007 LSI Corporation.
+ *  Copyright (c) 2001-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_raid.h
  *          Title:  MPI RAID message and structures
  *  Creation Date:  February 27, 2001
  *
- *    mpi_raid.h Version:  01.05.03
+ *    mpi_raid.h Version:  01.05.05
  *
  *  Version History
  *  ---------------
@@ -34,6 +34,9 @@
  *                      _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
  *  02-28-07  01.05.03  Added new RAID Action, Device FW Update Mode, and
  *                      associated defines.
+ *  08-07-07  01.05.04  Added Disable Full Rebuild bit to the ActionDataWord
+ *                      for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ *  01-15-08  01.05.05  Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
  *  --------------------------------------------------------------------------
  */
 
@@ -93,6 +96,7 @@ typedef struct _MSG_RAID_ACTION
 #define MPI_RAID_ACTION_SET_RESYNC_RATE             (0x13)
 #define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE         (0x14)
 #define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE       (0x15)
+#define MPI_RAID_ACTION_SET_VOLUME_NAME             (0x16)
 
 /* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
 #define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC           (0x00000001)
@@ -105,6 +109,9 @@ typedef struct _MSG_RAID_ACTION
 #define MPI_RAID_ACTION_ADATA_KEEP_LBA0             (0x00000000)
 #define MPI_RAID_ACTION_ADATA_ZERO_LBA0             (0x00000002)
 
+/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */
+#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD  (0x00000001)
+
 /* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
 #define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL        (0x00000001)
 
diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h
index 33fca83cefc2..ab410036bbfc 100644
--- a/drivers/message/fusion/lsi/mpi_sas.h
+++ b/drivers/message/fusion/lsi/mpi_sas.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2004-2006 LSI Corporation.
+ *  Copyright (c) 2004-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_sas.h
  *          Title:  MPI Serial Attached SCSI structures and definitions
  *  Creation Date:  August 19, 2004
  *
- *    mpi_sas.h Version:  01.05.04
+ *    mpi_sas.h Version:  01.05.05
  *
  *  Version History
  *  ---------------
@@ -23,6 +23,10 @@
  *                      reply.
  *  10-11-06  01.05.04  Fixed the name of a define for Operation field of SAS IO
  *                      Unit Control request.
+ *  01-15-08  01.05.05  Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ *                      including adding IOCParameter and IOCParameter value
+ *                      fields to SAS IO Unit Control Request.
+ *                      Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
  *  --------------------------------------------------------------------------
  */
 
@@ -60,6 +64,8 @@
  * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
  * data and SAS IO Unit Configuration pages.
  */
+#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC    (0xF0000000)
+
 #define MPI_SAS_DEVICE_INFO_SEP                 (0x00004000)
 #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE        (0x00002000)
 #define MPI_SAS_DEVICE_INFO_LSI_DEVICE          (0x00001000)
@@ -216,7 +222,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
     U8                      ChainOffset;        /* 02h */
     U8                      Function;           /* 03h */
     U16                     DevHandle;          /* 04h */
-    U8                      Reserved3;          /* 06h */
+    U8                      IOCParameter;       /* 06h */
     U8                      MsgFlags;           /* 07h */
     U32                     MsgContext;         /* 08h */
     U8                      TargetID;           /* 0Ch */
@@ -225,7 +231,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
     U8                      PrimFlags;          /* 0Fh */
     U32                     Primitive;          /* 10h */
     U64                     SASAddress;         /* 14h */
-    U32                     Reserved4;          /* 1Ch */
+    U32                     IOCParameterValue;  /* 1Ch */
 } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
   SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
 
@@ -241,6 +247,8 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
 #define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL  (0x0C)
 #define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE       (0x0D)  /* obsolete name */
 #define MPI_SAS_OP_REMOVE_DEVICE                (0x0D)
+#define MPI_SAS_OP_SET_IOC_PARAMETER            (0x0E)
+#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN         (0x80)
 
 /* values for the PrimFlags field */
 #define MPI_SAS_PRIMFLAGS_SINGLE                (0x08)
@@ -256,7 +264,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
     U8                      MsgLength;          /* 02h */
     U8                      Function;           /* 03h */
     U16                     DevHandle;          /* 04h */
-    U8                      Reserved3;          /* 06h */
+    U8                      IOCParameter;       /* 06h */
     U8                      MsgFlags;           /* 07h */
     U32                     MsgContext;         /* 08h */
     U16                     Reserved4;          /* 0Ch */
diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h
index ff8c37d3fdcb..c3dea7f6909d 100644
--- a/drivers/message/fusion/lsi/mpi_targ.h
+++ b/drivers/message/fusion/lsi/mpi_targ.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2004 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_targ.h
diff --git a/drivers/message/fusion/lsi/mpi_tool.h b/drivers/message/fusion/lsi/mpi_tool.h
index 8834ae6ce0f2..53cd715aa7e4 100644
--- a/drivers/message/fusion/lsi/mpi_tool.h
+++ b/drivers/message/fusion/lsi/mpi_tool.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2001-2005 LSI Corporation.
+ *  Copyright (c) 2001-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_tool.h
diff --git a/drivers/message/fusion/lsi/mpi_type.h b/drivers/message/fusion/lsi/mpi_type.h
index 08dad9c1e446..888b26dbc413 100644
--- a/drivers/message/fusion/lsi/mpi_type.h
+++ b/drivers/message/fusion/lsi/mpi_type.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2004 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_type.h
  *          Title:  MPI Basic type definitions
  *  Creation Date:  June 6, 2000
  *
- *    mpi_type.h Version:  01.05.01
+ *    mpi_type.h Version:  01.05.02
  *
  *  Version History
  *  ---------------
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index c4e8b9aa3827..96ac88317b8e 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -79,9 +79,22 @@ MODULE_VERSION(my_VERSION);
 /*
  *  cmd line parameters
  */
-static int mpt_msi_enable = -1;
-module_param(mpt_msi_enable, int, 0);
-MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)");
+
+static int mpt_msi_enable_spi;
+module_param(mpt_msi_enable_spi, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable_spi, " Enable MSI Support for SPI \
+                controllers (default=0)");
+
+static int mpt_msi_enable_fc;
+module_param(mpt_msi_enable_fc, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \
+                controllers (default=0)");
+
+static int mpt_msi_enable_sas;
+module_param(mpt_msi_enable_sas, int, 1);
+MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
+                controllers (default=1)");
+
 
 static int mpt_channel_mapping;
 module_param(mpt_channel_mapping, int, 0);
@@ -91,7 +104,17 @@ static int mpt_debug_level;
 static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
                   &mpt_debug_level, 0600);
-MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h - (default=0)");
+MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \
+        - (default=0)");
+
+int mpt_fwfault_debug;
+EXPORT_SYMBOL(mpt_fwfault_debug);
+module_param_call(mpt_fwfault_debug, param_set_int, param_get_int,
+          &mpt_fwfault_debug, 0600);
+MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault"
+        " and halt Firmware on fault - (default=0)");
+
+
 
 #ifdef MFCNT
 static int mfcounter = 0;
@@ -1751,16 +1774,25 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
                 ioc->bus_type = SAS;
         }
 
-        if (mpt_msi_enable == -1) {
-                /* Enable on SAS, disable on FC and SPI */
-                if (ioc->bus_type == SAS)
-                        ioc->msi_enable = 1;
-                else
-                        ioc->msi_enable = 0;
-        } else
-                /* follow flag: 0 - disable; 1 - enable */
-                ioc->msi_enable = mpt_msi_enable;
 
+        switch (ioc->bus_type) {
+
+        case SAS:
+                ioc->msi_enable = mpt_msi_enable_sas;
+                break;
+
+        case SPI:
+                ioc->msi_enable = mpt_msi_enable_spi;
+                break;
+
+        case FC:
+                ioc->msi_enable = mpt_msi_enable_fc;
+                break;
+
+        default:
+                ioc->msi_enable = 0;
+                break;
+        }
         if (ioc->errata_flag_1064)
                 pci_disable_io_access(pdev);
 
@@ -6313,6 +6345,33 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
         *size = y;
 }
 
+
+/**
+ *      mpt_halt_firmware - Halts the firmware if it is operational and panic
+ *      the kernel
+ *      @ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_halt_firmware(MPT_ADAPTER *ioc)
+{
+        u32      ioc_raw_state;
+
+        ioc_raw_state = mpt_GetIocState(ioc, 0);
+
+        if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
+                printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
+                        ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+                panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
+                        ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+        } else {
+                CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
+                panic("%s: Firmware is halted due to command timeout\n",
+                        ioc->name);
+        }
+}
+EXPORT_SYMBOL(mpt_halt_firmware);
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  *      Reset Handling
@@ -6345,6 +6404,8 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
         printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
         printk("MF count 0x%x !\n", ioc->mfcnt);
 #endif
+        if (mpt_fwfault_debug)
+                mpt_halt_firmware(ioc);
 
         /* Reset the adapter. Prevent more than 1 call to
          * mpt_do_ioc_recovery at any instant in time.
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index dff048cfa101..b3e981d2a506 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -922,11 +922,14 @@ extern void	 mpt_free_fw_memory(MPT_ADAPTER *ioc);
 extern int       mpt_findImVolumes(MPT_ADAPTER *ioc);
 extern int       mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 extern int       mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
+extern void     mpt_halt_firmware(MPT_ADAPTER *ioc);
+
 
 /*
  *  Public data decl's...
  */
 extern struct list_head   ioc_list;
+extern int mpt_fwfault_debug;
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif          /* } __KERNEL__ */
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index ee090413e598..e62c6bc4ad33 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1846,6 +1846,9 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
         if (hd->timeouts < -1)
                 hd->timeouts++;
 
+        if (mpt_fwfault_debug)
+                mpt_halt_firmware(ioc);
+
         /* Most important!  Set TaskMsgContext to SCpnt's MsgContext!
          * (the IO to be ABORT'd)
          *
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 9cf8ae6e4b39..d5749a7bc777 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
 obj-$(CONFIG_ICS932S401)        += ics932s401.o
 obj-$(CONFIG_LKDTM)             += lkdtm.o
 obj-$(CONFIG_TIFM_CORE)         += tifm_core.o
-obj-$(CONFIG_DELL_LAPTOP)       += dell-laptop.o
 obj-$(CONFIG_TIFM_7XX1)         += tifm_7xx1.o
 obj-$(CONFIG_PHANTOM)           += phantom.o
 obj-$(CONFIG_SGI_IOC4)          += ioc4.o
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 73b7fb8de47a..82fb9958f22f 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -899,7 +899,7 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version,
         dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
                 part_sn2->remote_vars_pa);
 
-        part->last_heartbeat = remote_vars->heartbeat;
+        part->last_heartbeat = remote_vars->heartbeat - 1;
         dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
                 part->last_heartbeat);
 
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 745ac188babe..d15d8b79d8e5 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -646,7 +646,7 @@ static const struct net_device_ops etherh_netdev_ops = {
         .ndo_get_stats          = ei_get_stats,
         .ndo_set_multicast_list = ei_set_multicast_list,
         .ndo_validate_addr      = eth_validate_addr,
-        .ndo_set_mac_addr       = eth_set_mac_addr,
+        .ndo_set_mac_address    = eth_set_mac_addr,
         .ndo_change_mtu         = eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
         .ndo_poll_controller    = ei_poll,
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 337488ec707c..a4eb6c40678c 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -37,7 +37,10 @@ static int phy_debug = 0;
 #define __ei_open       ax_ei_open
 #define __ei_close      ax_ei_close
 #define __ei_poll       ax_ei_poll
+#define __ei_start_xmit ax_ei_start_xmit
 #define __ei_tx_timeout ax_ei_tx_timeout
+#define __ei_get_stats  ax_ei_get_stats
+#define __ei_set_multicast_list ax_ei_set_multicast_list
 #define __ei_interrupt  ax_ei_interrupt
 #define ____alloc_ei_netdev ax__alloc_ei_netdev
 #define __NS8390_init   ax_NS8390_init
@@ -623,6 +626,23 @@ static void ax_eeprom_register_write(struct eeprom_93cx6 *eeprom)
 }
 #endif
 
+static const struct net_device_ops ax_netdev_ops = {
+        .ndo_open               = ax_open,
+        .ndo_stop               = ax_close,
+        .ndo_do_ioctl           = ax_ioctl,
+
+        .ndo_start_xmit         = ax_ei_start_xmit,
+        .ndo_tx_timeout         = ax_ei_tx_timeout,
+        .ndo_get_stats          = ax_ei_get_stats,
+        .ndo_set_multicast_list = ax_ei_set_multicast_list,
+        .ndo_validate_addr      = eth_validate_addr,
+        .ndo_set_mac_address    = eth_mac_addr,
+        .ndo_change_mtu         = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+        .ndo_poll_controller    = ax_ei_poll,
+#endif
+};
+
 /* setup code */
 
 static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
@@ -738,9 +758,7 @@ static int ax_init_dev(struct net_device *dev, int first_init)
         ei_status.get_8390_hdr  = &ax_get_8390_hdr;
         ei_status.priv = 0;
 
-        dev->open               = ax_open;
-        dev->stop               = ax_close;
-        dev->do_ioctl           = ax_ioctl;
+        dev->netdev_ops         = &ax_netdev_ops;
         dev->ethtool_ops        = &ax_ethtool_ops;
 
         ax->msg_enable          = NETIF_MSG_LINK;
@@ -753,9 +771,6 @@ static int ax_init_dev(struct net_device *dev, int first_init)
         ax->mii.mdio_write      = ax_phy_write;
         ax->mii.dev             = dev;
 
-#ifdef CONFIG_NET_POLL_CONTROLLER
-        dev->poll_controller = ax_ei_poll;
-#endif
         ax_NS8390_init(dev, 0);
 
         if (first_init)
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 5ae131c147f9..c38512ebcea6 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -679,6 +679,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
                         dev_kfree_skb_any(skb);
                         return -ENOMEM;
                 }
+                bp->force_copybreak = 1;
         }
 
         rh = (struct rx_header *) skb->data;
@@ -800,7 +801,7 @@ static int b44_rx(struct b44 *bp, int budget)
                 /* Omit CRC. */
                 len -= 4;
 
-                if (len > RX_COPY_THRESHOLD) {
+                if (!bp->force_copybreak && len > RX_COPY_THRESHOLD) {
                         int skb_size;
                         skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
                         if (skb_size < 0)
@@ -2152,6 +2153,7 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
         bp = netdev_priv(dev);
         bp->sdev = sdev;
         bp->dev = dev;
+        bp->force_copybreak = 0;
 
         bp->msg_enable = netif_msg_init(b44_debug, B44_DEF_MSG_ENABLE);
 
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index 7db0c84a7950..e678498de6db 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -395,7 +395,7 @@ struct b44 {
         u32                     rx_pending;
         u32                     tx_pending;
         u8                      phy_addr;
-
+        u8                      force_copybreak;
         struct mii_if_info      mii_if;
 };
 
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index fd705d1295a7..6fcccef4cf3d 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -20,6 +20,11 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define BCM_VLAN                        1
+#endif
+
+
 /* error/debug prints */
 
 #define DRV_MODULE_NAME         "bnx2x"
@@ -78,11 +83,6 @@
 #endif
 
 
-#ifdef NETIF_F_HW_VLAN_TX
-#define BCM_VLAN                        1
-#endif
-
-
 #define U64_LO(x)                       (u32)(((u64)(x)) & 0xffffffff)
 #define U64_HI(x)                       (u32)(((u64)(x)) >> 32)
 #define HILO_U64(hi, lo)                ((((u64)(hi)) << 32) + (lo))
@@ -150,6 +150,9 @@ struct sw_rx_page {
 
 #define PAGES_PER_SGE_SHIFT             0
 #define PAGES_PER_SGE                   (1 << PAGES_PER_SGE_SHIFT)
+#define SGE_PAGE_SIZE                   PAGE_SIZE
+#define SGE_PAGE_SHIFT                  PAGE_SHIFT
+#define SGE_PAGE_ALIGN(addr)            PAGE_ALIGN(addr)
 
 #define BCM_RX_ETH_PAYLOAD_ALIGN        64
 
@@ -736,7 +739,7 @@ struct bnx2x {
         struct bnx2x_fastpath   fp[MAX_CONTEXT];
         void __iomem            *regview;
         void __iomem            *doorbells;
-#define BNX2X_DB_SIZE           (16*2048)
+#define BNX2X_DB_SIZE           (16*BCM_PAGE_SIZE)
 
         struct net_device       *dev;
         struct pci_dev          *pdev;
@@ -801,6 +804,8 @@ struct bnx2x {
 #define TPA_ENABLE_FLAG                 0x80
 #define NO_MCP_FLAG                     0x100
 #define BP_NOMCP(bp)                    (bp->flags & NO_MCP_FLAG)
+#define HW_VLAN_TX_FLAG                 0x400
+#define HW_VLAN_RX_FLAG                 0x800
 
         int                     func;
 #define BP_PORT(bp)                     (bp->func % PORT_MAX)
@@ -811,7 +816,7 @@ struct bnx2x {
         int                     pm_cap;
         int                     pcie_cap;
 
-        struct work_struct      sp_task;
+        struct delayed_work     sp_task;
         struct work_struct      reset_task;
 
         struct timer_list       timer;
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 4be05847f86f..7c533797c064 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -38,9 +38,7 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#ifdef NETIF_F_HW_VLAN_TX
-        #include <linux/if_vlan.h>
-#endif
+#include <linux/if_vlan.h>
 #include <net/ip.h>
 #include <net/tcp.h>
 #include <net/checksum.h>
@@ -95,6 +93,7 @@ MODULE_PARM_DESC(debug, "default debug msglevel");
 module_param(use_multi, int, 0);
 MODULE_PARM_DESC(use_multi, "use per-CPU queues");
 #endif
+static struct workqueue_struct *bnx2x_wq;
 
 enum bnx2x_board_type {
         BCM57710 = 0,
@@ -671,7 +670,8 @@ static void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
                 synchronize_irq(bp->pdev->irq);
 
         /* make sure sp_task is not running */
-        cancel_work_sync(&bp->sp_task);
+        cancel_delayed_work(&bp->sp_task);
+        flush_workqueue(bnx2x_wq);
 }
 
 /* fast path */
@@ -972,7 +972,7 @@ static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
                 return;
 
         pci_unmap_page(bp->pdev, pci_unmap_addr(sw_buf, mapping),
-                       BCM_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
+                       SGE_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
         __free_pages(page, PAGES_PER_SGE_SHIFT);
 
         sw_buf->page = NULL;
@@ -1000,7 +1000,7 @@ static inline int bnx2x_alloc_rx_sge(struct bnx2x *bp,
         if (unlikely(page == NULL))
                 return -ENOMEM;
 
-        mapping = pci_map_page(bp->pdev, page, 0, BCM_PAGE_SIZE*PAGES_PER_SGE,
+        mapping = pci_map_page(bp->pdev, page, 0, SGE_PAGE_SIZE*PAGES_PER_SGE,
                                PCI_DMA_FROMDEVICE);
         if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
                 __free_pages(page, PAGES_PER_SGE_SHIFT);
@@ -1096,9 +1096,9 @@ static void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp,
                                   struct eth_fast_path_rx_cqe *fp_cqe)
 {
         struct bnx2x *bp = fp->bp;
-        u16 sge_len = BCM_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
+        u16 sge_len = SGE_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
                                      le16_to_cpu(fp_cqe->len_on_bd)) >>
-                      BCM_PAGE_SHIFT;
+                      SGE_PAGE_SHIFT;
         u16 last_max, last_elem, first_elem;
         u16 delta = 0;
         u16 i;
@@ -1203,22 +1203,22 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
                                u16 cqe_idx)
 {
         struct sw_rx_page *rx_pg, old_rx_pg;
-        struct page *sge;
         u16 len_on_bd = le16_to_cpu(fp_cqe->len_on_bd);
         u32 i, frag_len, frag_size, pages;
         int err;
         int j;
 
         frag_size = le16_to_cpu(fp_cqe->pkt_len) - len_on_bd;
-        pages = BCM_PAGE_ALIGN(frag_size) >> BCM_PAGE_SHIFT;
+        pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
 
         /* This is needed in order to enable forwarding support */
         if (frag_size)
-                skb_shinfo(skb)->gso_size = min((u32)BCM_PAGE_SIZE,
+                skb_shinfo(skb)->gso_size = min((u32)SGE_PAGE_SIZE,
                                                max(frag_size, (u32)len_on_bd));
 
 #ifdef BNX2X_STOP_ON_ERROR
-        if (pages > 8*PAGES_PER_SGE) {
+        if (pages >
+            min((u32)8, (u32)MAX_SKB_FRAGS) * SGE_PAGE_SIZE * PAGES_PER_SGE) {
                 BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n",
                           pages, cqe_idx);
                 BNX2X_ERR("fp_cqe->pkt_len = %d  fp_cqe->len_on_bd = %d\n",
@@ -1234,9 +1234,8 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 
                 /* FW gives the indices of the SGE as if the ring is an array
                    (meaning that "next" element will consume 2 indices) */
-                frag_len = min(frag_size, (u32)(BCM_PAGE_SIZE*PAGES_PER_SGE));
+                frag_len = min(frag_size, (u32)(SGE_PAGE_SIZE*PAGES_PER_SGE));
                 rx_pg = &fp->rx_page_ring[sge_idx];
-                sge = rx_pg->page;
                 old_rx_pg = *rx_pg;
 
                 /* If we fail to allocate a substitute page, we simply stop
@@ -1249,7 +1248,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 
                 /* Unmap the page as we r going to pass it to the stack */
                 pci_unmap_page(bp->pdev, pci_unmap_addr(&old_rx_pg, mapping),
-                              BCM_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
+                              SGE_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
 
                 /* Add one frag and update the appropriate fields in the skb */
                 skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len);
@@ -1282,6 +1281,13 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
         if (likely(new_skb)) {
                 /* fix ip xsum and give it to the stack */
                 /* (no need to map the new skb) */
+#ifdef BCM_VLAN
+                int is_vlan_cqe =
+                        (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
+                         PARSING_FLAGS_VLAN);
+                int is_not_hwaccel_vlan_cqe =
+                        (is_vlan_cqe && (!(bp->flags & HW_VLAN_RX_FLAG)));
+#endif
 
                 prefetch(skb);
                 prefetch(((char *)(skb)) + 128);
@@ -1306,6 +1312,12 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
                         struct iphdr *iph;
 
                         iph = (struct iphdr *)skb->data;
+#ifdef BCM_VLAN
+                        /* If there is no Rx VLAN offloading -
+                           take VLAN tag into an account */
+                        if (unlikely(is_not_hwaccel_vlan_cqe))
+                                iph = (struct iphdr *)((u8 *)iph + VLAN_HLEN);
+#endif
                         iph->check = 0;
                         iph->check = ip_fast_csum((u8 *)iph, iph->ihl);
                 }
@@ -1313,9 +1325,8 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
                 if (!bnx2x_fill_frag_skb(bp, fp, skb,
                                          &cqe->fast_path_cqe, cqe_idx)) {
 #ifdef BCM_VLAN
-                        if ((bp->vlgrp != NULL) &&
-                            (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
-                             PARSING_FLAGS_VLAN))
+                        if ((bp->vlgrp != NULL) && is_vlan_cqe &&
+                            (!is_not_hwaccel_vlan_cqe))
                                 vlan_hwaccel_receive_skb(skb, bp->vlgrp,
                                                 le16_to_cpu(cqe->fast_path_cqe.
                                                             vlan_tag));
@@ -1355,11 +1366,23 @@ static inline void bnx2x_update_rx_prod(struct bnx2x *bp,
         rx_prods.cqe_prod = rx_comp_prod;
         rx_prods.sge_prod = rx_sge_prod;
 
+        /*
+         * Make sure that the BD and SGE data is updated before updating the
+         * producers since FW might read the BD/SGE right after the producer
+         * is updated.
+         * This is only applicable for weak-ordered memory model archs such
+         * as IA-64. The following barrier is also mandatory since FW will
+         * assumes BDs must have buffers.
+         */
+        wmb();
+
         for (i = 0; i < sizeof(struct tstorm_eth_rx_producers)/4; i++)
                 REG_WR(bp, BAR_TSTRORM_INTMEM +
                        TSTORM_RX_PRODS_OFFSET(BP_PORT(bp), FP_CL_ID(fp)) + i*4,
                        ((u32 *)&rx_prods)[i]);
 
+        mmiowb(); /* keep prod updates ordered */
+
         DP(NETIF_MSG_RX_STATUS,
            "Wrote: bd_prod %u  cqe_prod %u  sge_prod %u\n",
            bd_prod, rx_comp_prod, rx_sge_prod);
@@ -1415,7 +1438,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
                 DP(NETIF_MSG_RX_STATUS, "CQE type %x  err %x  status %x"
                    "  queue %x  vlan %x  len %u\n", CQE_TYPE(cqe_fp_flags),
                    cqe_fp_flags, cqe->fast_path_cqe.status_flags,
-                   cqe->fast_path_cqe.rss_hash_result,
+                   le32_to_cpu(cqe->fast_path_cqe.rss_hash_result),
                    le16_to_cpu(cqe->fast_path_cqe.vlan_tag),
                    le16_to_cpu(cqe->fast_path_cqe.pkt_len));
 
@@ -1547,7 +1570,7 @@ reuse_rx:
                 }
 
 #ifdef BCM_VLAN
-                if ((bp->vlgrp != NULL) &&
+                if ((bp->vlgrp != NULL) && (bp->flags & HW_VLAN_RX_FLAG) &&
                     (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
                      PARSING_FLAGS_VLAN))
                         vlan_hwaccel_receive_skb(skb, bp->vlgrp,
@@ -1580,7 +1603,6 @@ next_cqe:
         /* Update producers */
         bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod,
                              fp->rx_sge_prod);
-        mmiowb(); /* keep prod updates ordered */
 
         fp->rx_pkt += rx_pkt;
         fp->rx_calls++;
@@ -1660,7 +1682,7 @@ static irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
 
 
         if (unlikely(status & 0x1)) {
-                schedule_work(&bp->sp_task);
+                queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
 
                 status &= ~0x1;
                 if (!status)
@@ -1887,7 +1909,8 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
 
 static void bnx2x_calc_fc_adv(struct bnx2x *bp)
 {
-        switch (bp->link_vars.ieee_fc) {
+        switch (bp->link_vars.ieee_fc &
+                MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
         case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
                 bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
                                           ADVERTISED_Pause);
@@ -1957,10 +1980,11 @@ static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
                 rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
                 bnx2x_release_phy_lock(bp);
 
+                bnx2x_calc_fc_adv(bp);
+
                 if (bp->link_vars.link_up)
                         bnx2x_link_report(bp);
 
-                bnx2x_calc_fc_adv(bp);
 
                 return rc;
         }
@@ -2220,9 +2244,7 @@ static void bnx2x_link_attn(struct bnx2x *bp)
         /* Make sure that we are synced with the current statistics */
         bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-        bnx2x_acquire_phy_lock(bp);
         bnx2x_link_update(&bp->link_params, &bp->link_vars);
-        bnx2x_release_phy_lock(bp);
 
         if (bp->link_vars.link_up) {
 
@@ -2471,6 +2493,8 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
         if (asserted & ATTN_HARD_WIRED_MASK) {
                 if (asserted & ATTN_NIG_FOR_FUNC) {
 
+                        bnx2x_acquire_phy_lock(bp);
+
                         /* save nig interrupt mask */
                         bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
                         REG_WR(bp, nig_int_mask_addr, 0);
@@ -2526,8 +2550,10 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
         REG_WR(bp, hc_addr, asserted);
 
         /* now set back the mask */
-        if (asserted & ATTN_NIG_FOR_FUNC)
+        if (asserted & ATTN_NIG_FOR_FUNC) {
                 REG_WR(bp, nig_int_mask_addr, bp->nig_mask);
+                bnx2x_release_phy_lock(bp);
+        }
 }
 
 static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
@@ -2795,8 +2821,10 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 static void bnx2x_attn_int(struct bnx2x *bp)
 {
         /* read local copy of bits */
-        u32 attn_bits = bp->def_status_blk->atten_status_block.attn_bits;
-        u32 attn_ack = bp->def_status_blk->atten_status_block.attn_bits_ack;
+        u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block.
+                                                                attn_bits);
+        u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block.
+                                                                attn_bits_ack);
         u32 attn_state = bp->attn_state;
 
         /* look for changed bits */
@@ -2820,7 +2848,7 @@ static void bnx2x_attn_int(struct bnx2x *bp)
 
 static void bnx2x_sp_task(struct work_struct *work)
 {
-        struct bnx2x *bp = container_of(work, struct bnx2x, sp_task);
+        struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work);
         u16 status;
 
 
@@ -2844,7 +2872,7 @@ static void bnx2x_sp_task(struct work_struct *work)
         if (status & 0x2)
                 bp->stats_pending = 0;
 
-        bnx2x_ack_sb(bp, DEF_SB_ID, ATTENTION_ID, bp->def_att_idx,
+        bnx2x_ack_sb(bp, DEF_SB_ID, ATTENTION_ID, le16_to_cpu(bp->def_att_idx),
                      IGU_INT_NOP, 1);
         bnx2x_ack_sb(bp, DEF_SB_ID, USTORM_ID, le16_to_cpu(bp->def_u_idx),
                      IGU_INT_NOP, 1);
@@ -2875,7 +2903,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
                 return IRQ_HANDLED;
 #endif
 
-        schedule_work(&bp->sp_task);
+        queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
 
         return IRQ_HANDLED;
 }
@@ -2892,7 +2920,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 #define ADD_64(s_hi, a_hi, s_lo, a_lo) \
         do { \
                 s_lo += a_lo; \
-                s_hi += a_hi + (s_lo < a_lo) ? 1 : 0; \
+                s_hi += a_hi + ((s_lo < a_lo) ? 1 : 0); \
         } while (0)
 
 /* difference = minuend - subtrahend */
@@ -4496,7 +4524,7 @@ static void bnx2x_init_context(struct bnx2x *bp)
 
 static void bnx2x_init_ind_table(struct bnx2x *bp)
 {
-        int port = BP_PORT(bp);
+        int func = BP_FUNC(bp);
         int i;
 
         if (!is_multi(bp))
@@ -4505,10 +4533,8 @@ static void bnx2x_init_ind_table(struct bnx2x *bp)
         DP(NETIF_MSG_IFUP, "Initializing indirection table\n");
         for (i = 0; i < TSTORM_INDIRECTION_TABLE_SIZE; i++)
                 REG_WR8(bp, BAR_TSTRORM_INTMEM +
-                        TSTORM_INDIRECTION_TABLE_OFFSET(port) + i,
-                        i % bp->num_queues);
-
-        REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
+                        TSTORM_INDIRECTION_TABLE_OFFSET(func) + i,
+                        BP_CL_ID(bp) + (i % bp->num_queues));
 }
 
 static void bnx2x_set_client_config(struct bnx2x *bp)
@@ -4517,12 +4543,12 @@ static void bnx2x_set_client_config(struct bnx2x *bp)
         int port = BP_PORT(bp);
         int i;
 
-        tstorm_client.mtu = bp->dev->mtu + ETH_OVREHEAD;
+        tstorm_client.mtu = bp->dev->mtu;
         tstorm_client.statistics_counter_id = BP_CL_ID(bp);
         tstorm_client.config_flags =
                                 TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
 #ifdef BCM_VLAN
-        if (bp->rx_mode && bp->vlgrp) {
+        if (bp->rx_mode && bp->vlgrp && (bp->flags & HW_VLAN_RX_FLAG)) {
                 tstorm_client.config_flags |=
                                 TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
                 DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
@@ -4531,7 +4557,7 @@ static void bnx2x_set_client_config(struct bnx2x *bp)
 
         if (bp->flags & TPA_ENABLE_FLAG) {
                 tstorm_client.max_sges_for_packet =
-                        BCM_PAGE_ALIGN(tstorm_client.mtu) >> BCM_PAGE_SHIFT;
+                        SGE_PAGE_ALIGN(tstorm_client.mtu) >> SGE_PAGE_SHIFT;
                 tstorm_client.max_sges_for_packet =
                         ((tstorm_client.max_sges_for_packet +
                           PAGES_PER_SGE - 1) & (~(PAGES_PER_SGE - 1))) >>
@@ -4714,10 +4740,11 @@ static void bnx2x_init_internal_func(struct bnx2x *bp)
                          bp->e1hov);
         }
 
-        /* Init CQ ring mapping and aggregation size */
-        max_agg_size = min((u32)(bp->rx_buf_size +
-                                 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
-                           (u32)0xffff);
+        /* Init CQ ring mapping and aggregation size, the FW limit is 8 frags */
+        max_agg_size =
+                min((u32)(min((u32)8, (u32)MAX_SKB_FRAGS) *
+                          SGE_PAGE_SIZE * PAGES_PER_SGE),
+                    (u32)0xffff);
         for_each_queue(bp, i) {
                 struct bnx2x_fastpath *fp = &bp->fp[i];
 
@@ -4785,6 +4812,15 @@ static void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
         bnx2x_init_context(bp);
         bnx2x_init_internal(bp, load_code);
         bnx2x_init_ind_table(bp);
+        bnx2x_stats_init(bp);
+
+        /* At this point, we are ready for interrupts */
+        atomic_set(&bp->intr_sem, 0);
+
+        /* flush all before enabling interrupts */
+        mb();
+        mmiowb();
+
         bnx2x_int_enable(bp);
 }
 
@@ -5134,7 +5170,6 @@ static int bnx2x_init_common(struct bnx2x *bp)
         REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
         REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
         REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
-        REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 1);
 
 /*      REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */
         REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, 1);
@@ -5212,6 +5247,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
         }
 
         bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+        REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
         /* set NIC mode */
         REG_WR(bp, PRS_REG_NIC_MODE, 1);
         if (CHIP_IS_E1H(bp))
@@ -6393,17 +6429,8 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 }
         }
 
-        bnx2x_stats_init(bp);
-
         bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
 
-        /* Enable Rx interrupt handling before sending the ramrod
-           as it's completed on Rx FP queue */
-        bnx2x_napi_enable(bp);
-
-        /* Enable interrupt handling */
-        atomic_set(&bp->intr_sem, 0);
-
         rc = bnx2x_setup_leading(bp);
         if (rc) {
                 BNX2X_ERR("Setup leading failed!\n");
@@ -7501,7 +7528,7 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 
         mutex_init(&bp->port.phy_mutex);
 
-        INIT_WORK(&bp->sp_task, bnx2x_sp_task);
+        INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
         INIT_WORK(&bp->reset_task, bnx2x_reset_task);
 
         rc = bnx2x_get_hwinfo(bp);
@@ -8727,6 +8754,8 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
         tx_bd->general_data = ((UNICAST_ADDRESS <<
                                 ETH_TX_BD_ETH_ADDR_TYPE_SHIFT) | 1);
 
+        wmb();
+
         fp->hw_tx_prods->bds_prod =
                 cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + 1);
         mb(); /* FW restriction: must not reorder writing nbd and packets */
@@ -8778,7 +8807,6 @@ test_loopback_rx_exit:
         /* Update producers */
         bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
                              fp->rx_sge_prod);
-        mmiowb(); /* keep prod updates ordered */
 
 test_loopback_exit:
         bp->link_params.loopback_mode = LOOPBACK_NONE;
@@ -9549,11 +9577,14 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
            "sending pkt %u @%p  next_idx %u  bd %u @%p\n",
            pkt_prod, tx_buf, fp->tx_pkt_prod, bd_prod, tx_bd);
 
-        if ((bp->vlgrp != NULL) && vlan_tx_tag_present(skb)) {
+#ifdef BCM_VLAN
+        if ((bp->vlgrp != NULL) && vlan_tx_tag_present(skb) &&
+            (bp->flags & HW_VLAN_TX_FLAG)) {
                 tx_bd->vlan = cpu_to_le16(vlan_tx_tag_get(skb));
                 tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_VLAN_TAG;
                 vlan_off += 4;
         } else
+#endif
                 tx_bd->vlan = cpu_to_le16(pkt_prod);
 
         if (xmit_type) {
@@ -9705,6 +9736,15 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d  bd %u\n", nbd, bd_prod);
 
+        /*
+         * Make sure that the BD data is updated before updating the producer
+         * since FW might read the BD right after the producer is updated.
+         * This is only applicable for weak-ordered memory model archs such
+         * as IA-64. The following barrier is also mandatory since FW will
+         * assumes packets must have BDs.
+         */
+        wmb();
+
         fp->hw_tx_prods->bds_prod =
                 cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd);
         mb(); /* FW restriction: must not reorder writing nbd and packets */
@@ -9718,6 +9758,9 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
         dev->trans_start = jiffies;
 
         if (unlikely(bnx2x_tx_avail(fp) < MAX_SKB_FRAGS + 3)) {
+                /* We want bnx2x_tx_int to "see" the updated tx_bd_prod
+                   if we put Tx into XOFF state. */
+                smp_mb();
                 netif_stop_queue(dev);
                 bp->eth_stats.driver_xoff++;
                 if (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3)
@@ -9987,6 +10030,16 @@ static void bnx2x_vlan_rx_register(struct net_device *dev,
         struct bnx2x *bp = netdev_priv(dev);
 
         bp->vlgrp = vlgrp;
+
+        /* Set flags according to the required capabilities */
+        bp->flags &= ~(HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
+
+        if (dev->features & NETIF_F_HW_VLAN_TX)
+                bp->flags |= HW_VLAN_TX_FLAG;
+
+        if (dev->features & NETIF_F_HW_VLAN_RX)
+                bp->flags |= HW_VLAN_RX_FLAG;
+
         if (netif_running(dev))
                 bnx2x_set_client_config(bp);
 }
@@ -10143,6 +10196,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
                 dev->features |= NETIF_F_HIGHDMA;
 #ifdef BCM_VLAN
         dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
+        bp->flags |= (HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
 #endif
         dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
         dev->features |= NETIF_F_TSO6;
@@ -10519,12 +10573,20 @@ static struct pci_driver bnx2x_pci_driver = {
 
 static int __init bnx2x_init(void)
 {
+        bnx2x_wq = create_singlethread_workqueue("bnx2x");
+        if (bnx2x_wq == NULL) {
+                printk(KERN_ERR PFX "Cannot create workqueue\n");
+                return -ENOMEM;
+        }
+
         return pci_register_driver(&bnx2x_pci_driver);
 }
 
 static void __exit bnx2x_cleanup(void)
 {
         pci_unregister_driver(&bnx2x_pci_driver);
+
+        destroy_workqueue(bnx2x_wq);
 }
 
 module_init(bnx2x_init);
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index e3131ea629cd..dfe92264e825 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -132,7 +132,7 @@ void ehea_dump(void *adr, int len, char *msg)
         int x;
         unsigned char *deb = adr;
         for (x = 0; x < len; x += 16) {
-                printk(DRV_NAME " %s adr=%p ofs=%04x %016lx %016lx\n", msg,
+                printk(DRV_NAME " %s adr=%p ofs=%04x %016llx %016llx\n", msg,
                           deb, x, *((u64 *)&deb[0]), *((u64 *)&deb[8]));
                 deb += 16;
         }
@@ -883,7 +883,7 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param)
 
         while (eqe) {
                 qp_token = EHEA_BMASK_GET(EHEA_EQE_QP_TOKEN, eqe->entry);
-                ehea_error("QP aff_err: entry=0x%lx, token=0x%x",
+                ehea_error("QP aff_err: entry=0x%llx, token=0x%x",
                            eqe->entry, qp_token);
 
                 qp = port->port_res[qp_token].qp;
@@ -1159,7 +1159,7 @@ static void ehea_parse_eqe(struct ehea_adapter *adapter, u64 eqe)
                 netif_stop_queue(port->netdev);
                 break;
         default:
-                ehea_error("unknown event code %x, eqe=0x%lX", ec, eqe);
+                ehea_error("unknown event code %x, eqe=0x%llX", ec, eqe);
                 break;
         }
 }
@@ -1971,7 +1971,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
                 }
 
                 if (dev->mc_count > port->adapter->max_mc_mac) {
-                        ehea_info("Mcast registration limit reached (0x%lx). "
+                        ehea_info("Mcast registration limit reached (0x%llx). "
                                   "Use ALLMULTI!",
                                   port->adapter->max_mc_mac);
                         goto out;
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index 225c692b5d99..49d766ebbcf4 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -168,7 +168,7 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter,
                                              cq->fw_handle, rpage, 1);
                 if (hret < H_SUCCESS) {
                         ehea_error("register_rpage_cq failed ehea_cq=%p "
-                                   "hret=%lx counter=%i act_pages=%i",
+                                   "hret=%llx counter=%i act_pages=%i",
                                    cq, hret, counter, cq->attr.nr_pages);
                         goto out_kill_hwq;
                 }
@@ -178,13 +178,13 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter,
 
                         if ((hret != H_SUCCESS) || (vpage)) {
                                 ehea_error("registration of pages not "
-                                           "complete hret=%lx\n", hret);
+                                           "complete hret=%llx\n", hret);
                                 goto out_kill_hwq;
                         }
                 } else {
                         if (hret != H_PAGE_REGISTERED) {
                                 ehea_error("CQ: registration of page failed "
-                                           "hret=%lx\n", hret);
+                                           "hret=%llx\n", hret);
                                 goto out_kill_hwq;
                         }
                 }
@@ -986,15 +986,15 @@ void print_error_data(u64 *data)
                 length = EHEA_PAGESIZE;
 
         if (type == 0x8) /* Queue Pair */
-                ehea_error("QP (resource=%lX) state: AER=0x%lX, AERR=0x%lX, "
-                           "port=%lX", resource, data[6], data[12], data[22]);
+                ehea_error("QP (resource=%llX) state: AER=0x%llX, AERR=0x%llX, "
+                           "port=%llX", resource, data[6], data[12], data[22]);
 
         if (type == 0x4) /* Completion Queue */
-                ehea_error("CQ (resource=%lX) state: AER=0x%lX", resource,
+                ehea_error("CQ (resource=%llX) state: AER=0x%llX", resource,
                            data[6]);
 
         if (type == 0x3) /* Event Queue */
-                ehea_error("EQ (resource=%lX) state: AER=0x%lX", resource,
+                ehea_error("EQ (resource=%llX) state: AER=0x%llX", resource,
                            data[6]);
 
         ehea_dump(data, length, "error data");
@@ -1016,11 +1016,11 @@ void ehea_error_data(struct ehea_adapter *adapter, u64 res_handle)
                                 rblock);
 
         if (ret == H_R_STATE)
-                ehea_error("No error data is available: %lX.", res_handle);
+                ehea_error("No error data is available: %llX.", res_handle);
         else if (ret == H_SUCCESS)
                 print_error_data(rblock);
         else
-                ehea_error("Error data could not be fetched: %lX", res_handle);
+                ehea_error("Error data could not be fetched: %llX", res_handle);
 
         kfree(rblock);
 }
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 4e6a9195fe5f..ce900e54d8d1 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -795,6 +795,7 @@ static int fs_enet_open(struct net_device *dev)
 
         err = fs_init_phy(dev);
         if (err) {
+                free_irq(fep->interrupt, dev);
                 if (fep->fpi->use_napi)
                         napi_disable(&fep->napi);
                 return err;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index efcbeb6c8673..ea530673236e 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1622,10 +1622,18 @@ static int gfar_clean_tx_ring(struct net_device *dev)
 static void gfar_schedule_cleanup(struct net_device *dev)
 {
         struct gfar_private *priv = netdev_priv(dev);
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->txlock, flags);
+        spin_lock(&priv->rxlock);
+
         if (netif_rx_schedule_prep(&priv->napi)) {
                 gfar_write(&priv->regs->imask, IMASK_RTX_DISABLED);
                 __netif_rx_schedule(&priv->napi);
         }
+
+        spin_unlock(&priv->rxlock);
+        spin_unlock_irqrestore(&priv->txlock, flags);
 }
 
 /* Interrupt Handler for Transmit complete */
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index ecf9798987fa..2a2fc17b2878 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -613,7 +613,9 @@ static int __devinit mal_probe(struct of_device *ofdev,
         INIT_LIST_HEAD(&mal->list);
         spin_lock_init(&mal->lock);
 
-        netif_napi_add(NULL, &mal->napi, mal_poll,
+        init_dummy_netdev(&mal->dummy_dev);
+
+        netif_napi_add(&mal->dummy_dev, &mal->napi, mal_poll,
                        CONFIG_IBM_NEW_EMAC_POLL_WEIGHT);
 
         /* Load power-on reset defaults */
diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h
index 2f0a87360844..9ededfbf0726 100644
--- a/drivers/net/ibm_newemac/mal.h
+++ b/drivers/net/ibm_newemac/mal.h
@@ -214,6 +214,8 @@ struct mal_instance {
         int                     index;
         spinlock_t              lock;
 
+        struct net_device       dummy_dev;
+
         unsigned int features;
 };
 
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index ca3bb9f7321b..dfa6348ac1dc 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -602,7 +602,7 @@ static int ibmveth_open(struct net_device *netdev)
 
         if(lpar_rc != H_SUCCESS) {
                 ibmveth_error_printk("h_register_logical_lan failed with %ld\n", lpar_rc);
-                ibmveth_error_printk("buffer TCE:0x%lx filter TCE:0x%lx rxq desc:0x%lx MAC:0x%lx\n",
+                ibmveth_error_printk("buffer TCE:0x%llx filter TCE:0x%llx rxq desc:0x%llx MAC:0x%llx\n",
                                      adapter->buffer_list_dma,
                                      adapter->filter_list_dma,
                                      rxq_desc.desc,
@@ -1378,13 +1378,13 @@ static int ibmveth_show(struct seq_file *seq, void *v)
         seq_printf(seq, "Firmware MAC:    %pM\n", firmware_mac);
 
         seq_printf(seq, "\nAdapter Statistics:\n");
-        seq_printf(seq, "  TX:  vio_map_single failres:      %ld\n", adapter->tx_map_failed);
-        seq_printf(seq, "       send failures:               %ld\n", adapter->tx_send_failed);
-        seq_printf(seq, "  RX:  replenish task cycles:       %ld\n", adapter->replenish_task_cycles);
-        seq_printf(seq, "       alloc_skb_failures:          %ld\n", adapter->replenish_no_mem);
-        seq_printf(seq, "       add buffer failures:         %ld\n", adapter->replenish_add_buff_failure);
-        seq_printf(seq, "       invalid buffers:             %ld\n", adapter->rx_invalid_buffer);
-        seq_printf(seq, "       no buffers:                  %ld\n", adapter->rx_no_buffer);
+        seq_printf(seq, "  TX:  vio_map_single failres:      %lld\n", adapter->tx_map_failed);
+        seq_printf(seq, "       send failures:               %lld\n", adapter->tx_send_failed);
+        seq_printf(seq, "  RX:  replenish task cycles:       %lld\n", adapter->replenish_task_cycles);
+        seq_printf(seq, "       alloc_skb_failures:          %lld\n", adapter->replenish_no_mem);
+        seq_printf(seq, "       add buffer failures:         %lld\n", adapter->replenish_add_buff_failure);
+        seq_printf(seq, "       invalid buffers:             %lld\n", adapter->rx_invalid_buffer);
+        seq_printf(seq, "       no buffers:                  %lld\n", adapter->rx_no_buffer);
 
         return 0;
 }
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 29118f58a141..3a22dc41b656 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1073,7 +1073,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self)
 {
         unsigned int i;
         int ret;
-        char stir421x_fw_name[11];
+        char stir421x_fw_name[12];
         const struct firmware *fw;
         const unsigned char *fw_version_ptr; /* pointer to version string */
         unsigned long fw_version = 0;
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index c7457f97259d..cb793c2bade2 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -429,7 +429,7 @@ SIMPLE_PORT_ATTR(promiscuous);
 SIMPLE_PORT_ATTR(num_mcast);
 CUSTOM_PORT_ATTR(lpar_map, "0x%X\n", port->lpar_map);
 CUSTOM_PORT_ATTR(stopped_map, "0x%X\n", port->stopped_map);
-CUSTOM_PORT_ATTR(mac_addr, "0x%lX\n", port->mac_addr);
+CUSTOM_PORT_ATTR(mac_addr, "0x%llX\n", port->mac_addr);
 
 #define GET_PORT_ATTR(_name)    (&veth_port_attr_##_name.attr)
 static struct attribute *veth_port_default_attrs[] = {
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 4a5580c1126a..1d6e48e13366 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -84,7 +84,10 @@
 #define KORINA_NUM_RDS  64  /* number of receive descriptors */
 #define KORINA_NUM_TDS  64  /* number of transmit descriptors */
 
-#define KORINA_RBSIZE   536 /* size of one resource buffer = Ether MTU */
+/* KORINA_RBSIZE is the hardware's default maximum receive
+ * frame size in bytes. Having this hardcoded means that there
+ * is no support for MTU sizes greater than 1500. */
+#define KORINA_RBSIZE   1536 /* size of one resource buffer = Ether MTU */
 #define KORINA_RDS_MASK (KORINA_NUM_RDS - 1)
 #define KORINA_TDS_MASK (KORINA_NUM_TDS - 1)
 #define RD_RING_SIZE    (KORINA_NUM_RDS * sizeof(struct dma_desc))
@@ -196,7 +199,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
         struct korina_private *lp = netdev_priv(dev);
         unsigned long flags;
         u32 length;
-        u32 chain_index;
+        u32 chain_prev, chain_next;
         struct dma_desc *td;
 
         spin_lock_irqsave(&lp->lock, flags);
@@ -228,8 +231,8 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
         /* Setup the transmit descriptor. */
         dma_cache_inv((u32) td, sizeof(*td));
         td->ca = CPHYSADDR(skb->data);
-        chain_index = (lp->tx_chain_tail - 1) &
-                        KORINA_TDS_MASK;
+        chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK;
+        chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK;
 
         if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
                 if (lp->tx_chain_status == desc_empty) {
@@ -237,7 +240,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
                         td->control = DMA_COUNT(length) |
                                         DMA_DESC_COF | DMA_DESC_IOF;
                         /* Move tail */
-                        lp->tx_chain_tail = chain_index;
+                        lp->tx_chain_tail = chain_next;
                         /* Write to NDPTR */
                         writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
                                         &lp->tx_dma_regs->dmandptr);
@@ -248,12 +251,12 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
                         td->control = DMA_COUNT(length) |
                                         DMA_DESC_COF | DMA_DESC_IOF;
                         /* Link to prev */
-                        lp->td_ring[chain_index].control &=
+                        lp->td_ring[chain_prev].control &=
                                         ~DMA_DESC_COF;
                         /* Link to prev */
-                        lp->td_ring[chain_index].link =  CPHYSADDR(td);
+                        lp->td_ring[chain_prev].link =  CPHYSADDR(td);
                         /* Move tail */
-                        lp->tx_chain_tail = chain_index;
+                        lp->tx_chain_tail = chain_next;
                         /* Write to NDPTR */
                         writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
                                         &(lp->tx_dma_regs->dmandptr));
@@ -267,17 +270,16 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
                         td->control = DMA_COUNT(length) |
                                         DMA_DESC_COF | DMA_DESC_IOF;
                         /* Move tail */
-                        lp->tx_chain_tail = chain_index;
+                        lp->tx_chain_tail = chain_next;
                         lp->tx_chain_status = desc_filled;
-                        netif_stop_queue(dev);
                 } else {
                         /* Update tail */
                         td->control = DMA_COUNT(length) |
                                         DMA_DESC_COF | DMA_DESC_IOF;
-                        lp->td_ring[chain_index].control &=
+                        lp->td_ring[chain_prev].control &=
                                         ~DMA_DESC_COF;
-                        lp->td_ring[chain_index].link =  CPHYSADDR(td);
-                        lp->tx_chain_tail = chain_index;
+                        lp->td_ring[chain_prev].link =  CPHYSADDR(td);
+                        lp->tx_chain_tail = chain_next;
                 }
         }
         dma_cache_wback((u32) td, sizeof(*td));
@@ -327,13 +329,13 @@ static irqreturn_t korina_rx_dma_interrupt(int irq, void *dev_id)
 
         dmas = readl(&lp->rx_dma_regs->dmas);
         if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
-                netif_rx_schedule_prep(&lp->napi);
-
                 dmasm = readl(&lp->rx_dma_regs->dmasm);
                 writel(dmasm | (DMA_STAT_DONE |
                                 DMA_STAT_HALT | DMA_STAT_ERR),
                                 &lp->rx_dma_regs->dmasm);
 
+                netif_rx_schedule(&lp->napi);
+
                 if (dmas & DMA_STAT_ERR)
                         printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
 
@@ -350,15 +352,20 @@ static int korina_rx(struct net_device *dev, int limit)
         struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
         struct sk_buff *skb, *skb_new;
         u8 *pkt_buf;
-        u32 devcs, pkt_len, dmas, rx_free_desc;
+        u32 devcs, pkt_len, dmas;
         int count;
 
         dma_cache_inv((u32)rd, sizeof(*rd));
 
         for (count = 0; count < limit; count++) {
+                skb = lp->rx_skb[lp->rx_next_done];
+                skb_new = NULL;
 
                 devcs = rd->devcs;
 
+                if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0)
+                        break;
+
                 /* Update statistics counters */
                 if (devcs & ETH_RX_CRC)
                         dev->stats.rx_crc_errors++;
@@ -381,63 +388,55 @@ static int korina_rx(struct net_device *dev, int limit)
                          * in Rc32434 (errata ref #077) */
                         dev->stats.rx_errors++;
                         dev->stats.rx_dropped++;
-                }
-
-                while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
-                        /* init the var. used for the later
-                         * operations within the while loop */
-                        skb_new = NULL;
+                } else if ((devcs & ETH_RX_ROK)) {
                         pkt_len = RCVPKT_LENGTH(devcs);
-                        skb = lp->rx_skb[lp->rx_next_done];
-
-                        if ((devcs & ETH_RX_ROK)) {
-                                /* must be the (first and) last
-                                 * descriptor then */
-                                pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
-
-                                /* invalidate the cache */
-                                dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
-
-                                /* Malloc up new buffer. */
-                                skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
-
-                                if (!skb_new)
-                                        break;
-                                /* Do not count the CRC */
-                                skb_put(skb, pkt_len - 4);
-                                skb->protocol = eth_type_trans(skb, dev);
-
-                                /* Pass the packet to upper layers */
-                                netif_receive_skb(skb);
-                                dev->stats.rx_packets++;
-                                dev->stats.rx_bytes += pkt_len;
-
-                                /* Update the mcast stats */
-                                if (devcs & ETH_RX_MP)
-                                        dev->stats.multicast++;
-
-                                lp->rx_skb[lp->rx_next_done] = skb_new;
-                        }
-
-                        rd->devcs = 0;
-
-                        /* Restore descriptor's curr_addr */
-                        if (skb_new)
-                                rd->ca = CPHYSADDR(skb_new->data);
-                        else
-                                rd->ca = CPHYSADDR(skb->data);
-
-                        rd->control = DMA_COUNT(KORINA_RBSIZE) |
-                                DMA_DESC_COD | DMA_DESC_IOD;
-                        lp->rd_ring[(lp->rx_next_done - 1) &
-                                KORINA_RDS_MASK].control &=
-                                ~DMA_DESC_COD;
-
-                        lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
-                        dma_cache_wback((u32)rd, sizeof(*rd));
-                        rd = &lp->rd_ring[lp->rx_next_done];
-                        writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+
+                        /* must be the (first and) last
+                         * descriptor then */
+                        pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+
+                        /* invalidate the cache */
+                        dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+
+                        /* Malloc up new buffer. */
+                        skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+
+                        if (!skb_new)
+                                break;
+                        /* Do not count the CRC */
+                        skb_put(skb, pkt_len - 4);
+                        skb->protocol = eth_type_trans(skb, dev);
+
+                        /* Pass the packet to upper layers */
+                        netif_receive_skb(skb);
+                        dev->stats.rx_packets++;
+                        dev->stats.rx_bytes += pkt_len;
+
+                        /* Update the mcast stats */
+                        if (devcs & ETH_RX_MP)
+                                dev->stats.multicast++;
+
+                        lp->rx_skb[lp->rx_next_done] = skb_new;
                 }
+
+                rd->devcs = 0;
+
+                /* Restore descriptor's curr_addr */
+                if (skb_new)
+                        rd->ca = CPHYSADDR(skb_new->data);
+                else
+                        rd->ca = CPHYSADDR(skb->data);
+
+                rd->control = DMA_COUNT(KORINA_RBSIZE) |
+                        DMA_DESC_COD | DMA_DESC_IOD;
+                lp->rd_ring[(lp->rx_next_done - 1) &
+                        KORINA_RDS_MASK].control &=
+                        ~DMA_DESC_COD;
+
+                lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+                dma_cache_wback((u32)rd, sizeof(*rd));
+                rd = &lp->rd_ring[lp->rx_next_done];
+                writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
         }
 
         dmas = readl(&lp->rx_dma_regs->dmas);
@@ -623,12 +622,12 @@ korina_tx_dma_interrupt(int irq, void *dev_id)
         dmas = readl(&lp->tx_dma_regs->dmas);
 
         if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
-                korina_tx(dev);
-
                 dmasm = readl(&lp->tx_dma_regs->dmasm);
                 writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
                                 &lp->tx_dma_regs->dmasm);
 
+                korina_tx(dev);
+
                 if (lp->tx_chain_status == desc_filled &&
                         (readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
                         writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
@@ -901,6 +900,8 @@ static int korina_restart(struct net_device *dev)
 
         korina_free_ring(dev);
 
+        napi_disable(&lp->napi);
+
         ret = korina_init(dev);
         if (ret < 0) {
                 printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
@@ -999,14 +1000,14 @@ static int korina_open(struct net_device *dev)
          * that handles the Done Finished
          * Ovr and Und Events */
         ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
-                IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
+                        IRQF_DISABLED, "Korina ethernet Rx", dev);
         if (ret < 0) {
                 printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
                     dev->name, lp->rx_irq);
                 goto err_release;
         }
         ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
-                IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
+                        IRQF_DISABLED, "Korina ethernet Tx", dev);
         if (ret < 0) {
                 printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
                     dev->name, lp->tx_irq);
@@ -1015,7 +1016,7 @@ static int korina_open(struct net_device *dev)
 
         /* Install handler for overrun error. */
         ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
-                        IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
+                        IRQF_DISABLED, "Ethernet Overflow", dev);
         if (ret < 0) {
                 printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
                     dev->name, lp->ovr_irq);
@@ -1024,7 +1025,7 @@ static int korina_open(struct net_device *dev)
 
         /* Install handler for underflow error. */
         ret = request_irq(lp->und_irq, &korina_und_interrupt,
-                        IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
+                        IRQF_DISABLED, "Ethernet Underflow", dev);
         if (ret < 0) {
                 printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
                     dev->name, lp->und_irq);
@@ -1067,6 +1068,8 @@ static int korina_close(struct net_device *dev)
 
         korina_free_ring(dev);
 
+        napi_disable(&lp->napi);
+
         free_irq(lp->rx_irq, dev);
         free_irq(lp->tx_irq, dev);
         free_irq(lp->ovr_irq, dev);
@@ -1089,7 +1092,6 @@ static int korina_probe(struct platform_device *pdev)
                 return -ENOMEM;
         }
         SET_NETDEV_DEV(dev, &pdev->dev);
-        platform_set_drvdata(pdev, dev);
         lp = netdev_priv(dev);
 
         bif->dev = dev;
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index f8e601c51da7..c11c568fd7db 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -308,27 +308,16 @@ struct netxen_ring_ctx {
 #define netxen_set_cmd_desc_ctxid(cmd_desc, var)        \
         ((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
 
-#define netxen_set_cmd_desc_flags(cmd_desc, val)        \
-        (cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
-                ~cpu_to_le16(0x7f)) | cpu_to_le16((val) & 0x7f)
-#define netxen_set_cmd_desc_opcode(cmd_desc, val)       \
-        (cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
-                ~cpu_to_le16((u16)0x3f << 7)) | cpu_to_le16(((val) & 0x3f) << 7)
-
-#define netxen_set_cmd_desc_num_of_buff(cmd_desc, val)  \
-        (cmd_desc)->num_of_buffers_total_length = \
-                ((cmd_desc)->num_of_buffers_total_length & \
-                ~cpu_to_le32(0xff)) | cpu_to_le32((val) & 0xff)
-#define netxen_set_cmd_desc_totallength(cmd_desc, val)  \
-        (cmd_desc)->num_of_buffers_total_length = \
-                ((cmd_desc)->num_of_buffers_total_length & \
-                ~cpu_to_le32((u32)0xffffff << 8)) | \
-                cpu_to_le32(((val) & 0xffffff) << 8)
-
-#define netxen_get_cmd_desc_opcode(cmd_desc)    \
-        ((le16_to_cpu((cmd_desc)->flags_opcode) >> 7) & 0x003f)
-#define netxen_get_cmd_desc_totallength(cmd_desc)       \
-        ((le32_to_cpu((cmd_desc)->num_of_buffers_total_length) >> 8) & 0xffffff)
+#define netxen_set_tx_port(_desc, _port) \
+        (_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0)
+
+#define netxen_set_tx_flags_opcode(_desc, _flags, _opcode) \
+        (_desc)->flags_opcode = \
+        cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7))
+
+#define netxen_set_tx_frags_len(_desc, _frags, _len) \
+        (_desc)->num_of_buffers_total_length = \
+        cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8))
 
 struct cmd_desc_type0 {
         u8 tcp_hdr_offset;      /* For LSO only */
@@ -510,7 +499,8 @@ typedef enum {
         NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
         NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
         NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
-        NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
+        NETXEN_BRDTYPE_P3_10G_XFP = 0x0032,
+        NETXEN_BRDTYPE_P3_10G_TP = 0x0080
 
 } netxen_brdtype_t;
 
@@ -757,7 +747,7 @@ extern char netxen_nic_driver_name[];
  */
 struct netxen_skb_frag {
         u64 dma;
-        u32 length;
+        ulong length;
 };
 
 #define _netxen_set_bits(config_word, start, bits, val) {\
@@ -783,13 +773,7 @@ struct netxen_skb_frag {
 struct netxen_cmd_buffer {
         struct sk_buff *skb;
         struct netxen_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
-        u32 total_length;
-        u32 mss;
-        u16 port;
-        u8 cmd;
-        u8 frag_count;
-        unsigned long time_stamp;
-        u32 state;
+        u32 frag_count;
 };
 
 /* In rx_buffer, we do not need multiple fragments as is a single buffer */
@@ -876,7 +860,6 @@ struct nx_host_rds_ring {
         u32 skb_size;
         struct netxen_rx_buffer *rx_buf_arr;    /* rx buffers for receive   */
         struct list_head free_list;
-        int begin_alloc;
 };
 
 /*
@@ -995,31 +978,31 @@ struct netxen_recv_context {
  */
 
 typedef struct {
-        u64 host_phys_addr;     /* Ring base addr */
-        u32 ring_size;          /* Ring entries */
-        u16 msi_index;
-        u16 rsvd;               /* Padding */
+        __le64 host_phys_addr;  /* Ring base addr */
+        __le32 ring_size;               /* Ring entries */
+        __le16 msi_index;
+        __le16 rsvd;            /* Padding */
 } nx_hostrq_sds_ring_t;
 
 typedef struct {
-        u64 host_phys_addr;     /* Ring base addr */
-        u64 buff_size;          /* Packet buffer size */
-        u32 ring_size;          /* Ring entries */
-        u32 ring_kind;          /* Class of ring */
+        __le64 host_phys_addr;  /* Ring base addr */
+        __le64 buff_size;               /* Packet buffer size */
+        __le32 ring_size;               /* Ring entries */
+        __le32 ring_kind;               /* Class of ring */
 } nx_hostrq_rds_ring_t;
 
 typedef struct {
-        u64 host_rsp_dma_addr;  /* Response dma'd here */
-        u32 capabilities[4];    /* Flag bit vector */
-        u32 host_int_crb_mode;  /* Interrupt crb usage */
-        u32 host_rds_crb_mode;  /* RDS crb usage */
+        __le64 host_rsp_dma_addr;       /* Response dma'd here */
+        __le32 capabilities[4]; /* Flag bit vector */
+        __le32 host_int_crb_mode;       /* Interrupt crb usage */
+        __le32 host_rds_crb_mode;       /* RDS crb usage */
         /* These ring offsets are relative to data[0] below */
-        u32 rds_ring_offset;    /* Offset to RDS config */
-        u32 sds_ring_offset;    /* Offset to SDS config */
-        u16 num_rds_rings;      /* Count of RDS rings */
-        u16 num_sds_rings;      /* Count of SDS rings */
-        u16 rsvd1;              /* Padding */
-        u16 rsvd2;              /* Padding */
+        __le32 rds_ring_offset; /* Offset to RDS config */
+        __le32 sds_ring_offset; /* Offset to SDS config */
+        __le16 num_rds_rings;   /* Count of RDS rings */
+        __le16 num_sds_rings;   /* Count of SDS rings */
+        __le16 rsvd1;           /* Padding */
+        __le16 rsvd2;           /* Padding */
         u8  reserved[128];      /* reserve space for future expansion*/
         /* MUST BE 64-bit aligned.
            The following is packed:
@@ -1029,24 +1012,24 @@ typedef struct {
 } nx_hostrq_rx_ctx_t;
 
 typedef struct {
-        u32 host_producer_crb;  /* Crb to use */
-        u32 rsvd1;              /* Padding */
+        __le32 host_producer_crb;       /* Crb to use */
+        __le32 rsvd1;           /* Padding */
 } nx_cardrsp_rds_ring_t;
 
 typedef struct {
-        u32 host_consumer_crb;  /* Crb to use */
-        u32 interrupt_crb;      /* Crb to use */
+        __le32 host_consumer_crb;       /* Crb to use */
+        __le32 interrupt_crb;   /* Crb to use */
 } nx_cardrsp_sds_ring_t;
 
 typedef struct {
         /* These ring offsets are relative to data[0] below */
-        u32 rds_ring_offset;    /* Offset to RDS config */
-        u32 sds_ring_offset;    /* Offset to SDS config */
-        u32 host_ctx_state;     /* Starting State */
-        u32 num_fn_per_port;    /* How many PCI fn share the port */
-        u16 num_rds_rings;      /* Count of RDS rings */
-        u16 num_sds_rings;      /* Count of SDS rings */
-        u16 context_id;         /* Handle for context */
+        __le32 rds_ring_offset; /* Offset to RDS config */
+        __le32 sds_ring_offset; /* Offset to SDS config */
+        __le32 host_ctx_state;  /* Starting State */
+        __le32 num_fn_per_port; /* How many PCI fn share the port */
+        __le16 num_rds_rings;   /* Count of RDS rings */
+        __le16 num_sds_rings;   /* Count of SDS rings */
+        __le16 context_id;              /* Handle for context */
         u8  phys_port;          /* Physical id of port */
         u8  virt_port;          /* Virtual/Logical id of port */
         u8  reserved[128];      /* save space for future expansion */
@@ -1072,34 +1055,34 @@ typedef struct {
  */
 
 typedef struct {
-        u64 host_phys_addr;     /* Ring base addr */
-        u32 ring_size;          /* Ring entries */
-        u32 rsvd;               /* Padding */
+        __le64 host_phys_addr;  /* Ring base addr */
+        __le32 ring_size;               /* Ring entries */
+        __le32 rsvd;            /* Padding */
 } nx_hostrq_cds_ring_t;
 
 typedef struct {
-        u64 host_rsp_dma_addr;  /* Response dma'd here */
-        u64 cmd_cons_dma_addr;  /*  */
-        u64 dummy_dma_addr;     /*  */
-        u32 capabilities[4];    /* Flag bit vector */
-        u32 host_int_crb_mode;  /* Interrupt crb usage */
-        u32 rsvd1;              /* Padding */
-        u16 rsvd2;              /* Padding */
-        u16 interrupt_ctl;
-        u16 msi_index;
-        u16 rsvd3;              /* Padding */
+        __le64 host_rsp_dma_addr;       /* Response dma'd here */
+        __le64 cmd_cons_dma_addr;       /*  */
+        __le64 dummy_dma_addr;  /*  */
+        __le32 capabilities[4]; /* Flag bit vector */
+        __le32 host_int_crb_mode;       /* Interrupt crb usage */
+        __le32 rsvd1;           /* Padding */
+        __le16 rsvd2;           /* Padding */
+        __le16 interrupt_ctl;
+        __le16 msi_index;
+        __le16 rsvd3;           /* Padding */
         nx_hostrq_cds_ring_t cds_ring;  /* Desc of cds ring */
         u8  reserved[128];      /* future expansion */
 } nx_hostrq_tx_ctx_t;
 
 typedef struct {
-        u32 host_producer_crb;  /* Crb to use */
-        u32 interrupt_crb;      /* Crb to use */
+        __le32 host_producer_crb;       /* Crb to use */
+        __le32 interrupt_crb;   /* Crb to use */
 } nx_cardrsp_cds_ring_t;
 
 typedef struct {
-        u32 host_ctx_state;     /* Starting state */
-        u16 context_id;         /* Handle for context */
+        __le32 host_ctx_state;  /* Starting state */
+        __le16 context_id;              /* Handle for context */
         u8  phys_port;          /* Physical id of port */
         u8  virt_port;          /* Virtual/Logical id of port */
         nx_cardrsp_cds_ring_t cds_ring; /* Card cds settings */
@@ -1202,9 +1185,9 @@ enum {
 #define VPORT_MISS_MODE_ACCEPT_MULTI    2 /* accept unmatched multicast */
 
 typedef struct {
-        u64 qhdr;
-        u64 req_hdr;
-        u64 words[6];
+        __le64 qhdr;
+        __le64 req_hdr;
+        __le64 words[6];
 } nx_nic_req_t;
 
 typedef struct {
@@ -1486,8 +1469,6 @@ void netxen_release_tx_buffers(struct netxen_adapter *adapter);
 
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
 int netxen_init_firmware(struct netxen_adapter *adapter);
-void netxen_tso_check(struct netxen_adapter *adapter,
-                      struct cmd_desc_type0 *desc, struct sk_buff *skb);
 void netxen_nic_clear_stats(struct netxen_adapter *adapter);
 void netxen_watchdog_task(struct work_struct *work);
 void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
@@ -1496,6 +1477,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter);
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
 void netxen_p2_nic_set_multi(struct net_device *netdev);
 void netxen_p3_nic_set_multi(struct net_device *netdev);
+void netxen_p3_free_mac_list(struct netxen_adapter *adapter);
 int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
 
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 64b51643c626..746bdb470418 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -76,7 +76,7 @@ netxen_api_unlock(struct netxen_adapter *adapter)
 static u32
 netxen_poll_rsp(struct netxen_adapter *adapter)
 {
-        u32 raw_rsp, rsp = NX_CDRP_RSP_OK;
+        u32 rsp = NX_CDRP_RSP_OK;
         int     timeout = 0;
 
         do {
@@ -86,10 +86,7 @@ netxen_poll_rsp(struct netxen_adapter *adapter)
                 if (++timeout > NX_OS_CRB_RETRY_COUNT)
                         return NX_CDRP_RSP_TIMEOUT;
 
-                netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET,
-                                &raw_rsp);
-
-                rsp = le32_to_cpu(raw_rsp);
+                netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET, &rsp);
         } while (!NX_CDRP_IS_RSP(rsp));
 
         return rsp;
@@ -109,20 +106,16 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
         if (netxen_api_lock(adapter))
                 return NX_RCODE_TIMEOUT;
 
-        netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET,
-                        cpu_to_le32(signature));
+        netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET, signature);
 
-        netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET,
-                        cpu_to_le32(arg1));
+        netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET, arg1);
 
-        netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET,
-                        cpu_to_le32(arg2));
+        netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET, arg2);
 
-        netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET,
-                        cpu_to_le32(arg3));
+        netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET, arg3);
 
         netxen_nic_write_w1(adapter, NX_CDRP_CRB_OFFSET,
-                        cpu_to_le32(NX_CDRP_FORM_CMD(cmd)));
+                        NX_CDRP_FORM_CMD(cmd));
 
         rsp = netxen_poll_rsp(adapter);
 
@@ -133,7 +126,6 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
                 rcode = NX_RCODE_TIMEOUT;
         } else if (rsp == NX_CDRP_RSP_FAIL) {
                 netxen_nic_read_w1(adapter, NX_ARG1_CRB_OFFSET, &rcode);
-                rcode = le32_to_cpu(rcode);
 
                 printk(KERN_ERR "%s: failed card response code:0x%x\n",
                                 netxen_nic_driver_name, rcode);
@@ -183,7 +175,7 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 
         int i, nrds_rings, nsds_rings;
         size_t rq_size, rsp_size;
-        u32 cap, reg;
+        u32 cap, reg, val;
 
         int err;
 
@@ -225,11 +217,14 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 
         prq->num_rds_rings = cpu_to_le16(nrds_rings);
         prq->num_sds_rings = cpu_to_le16(nsds_rings);
-        prq->rds_ring_offset = 0;
-        prq->sds_ring_offset = prq->rds_ring_offset +
+        prq->rds_ring_offset = cpu_to_le32(0);
+
+        val = le32_to_cpu(prq->rds_ring_offset) +
                 (sizeof(nx_hostrq_rds_ring_t) * nrds_rings);
+        prq->sds_ring_offset = cpu_to_le32(val);
 
-        prq_rds = (nx_hostrq_rds_ring_t *)(prq->data + prq->rds_ring_offset);
+        prq_rds = (nx_hostrq_rds_ring_t *)(prq->data +
+                        le32_to_cpu(prq->rds_ring_offset));
 
         for (i = 0; i < nrds_rings; i++) {
 
@@ -241,17 +236,14 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
                 prq_rds[i].buff_size = cpu_to_le64(rds_ring->dma_size);
         }
 
-        prq_sds = (nx_hostrq_sds_ring_t *)(prq->data + prq->sds_ring_offset);
+        prq_sds = (nx_hostrq_sds_ring_t *)(prq->data +
+                        le32_to_cpu(prq->sds_ring_offset));
 
         prq_sds[0].host_phys_addr =
                 cpu_to_le64(recv_ctx->rcv_status_desc_phys_addr);
         prq_sds[0].ring_size = cpu_to_le32(adapter->max_rx_desc_count);
         /* only one msix vector for now */
-        prq_sds[0].msi_index = cpu_to_le32(0);
-
-        /* now byteswap offsets */
-        prq->rds_ring_offset = cpu_to_le32(prq->rds_ring_offset);
-        prq->sds_ring_offset = cpu_to_le32(prq->sds_ring_offset);
+        prq_sds[0].msi_index = cpu_to_le16(0);
 
         phys_addr = hostrq_phys_addr;
         err = netxen_issue_cmd(adapter,
@@ -269,9 +261,9 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 
 
         prsp_rds = ((nx_cardrsp_rds_ring_t *)
-                         &prsp->data[prsp->rds_ring_offset]);
+                         &prsp->data[le32_to_cpu(prsp->rds_ring_offset)]);
 
-        for (i = 0; i < le32_to_cpu(prsp->num_rds_rings); i++) {
+        for (i = 0; i < le16_to_cpu(prsp->num_rds_rings); i++) {
                 rds_ring = &recv_ctx->rds_rings[i];
 
                 reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
@@ -279,7 +271,7 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
         }
 
         prsp_sds = ((nx_cardrsp_sds_ring_t *)
-                        &prsp->data[prsp->sds_ring_offset]);
+                        &prsp->data[le32_to_cpu(prsp->sds_ring_offset)]);
         reg = le32_to_cpu(prsp_sds[0].host_consumer_crb);
         recv_ctx->crb_sts_consumer = NETXEN_NIC_REG(reg - 0x200);
 
@@ -288,7 +280,7 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 
         recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
         recv_ctx->context_id = le16_to_cpu(prsp->context_id);
-        recv_ctx->virt_port = le16_to_cpu(prsp->virt_port);
+        recv_ctx->virt_port = prsp->virt_port;
 
 out_free_rsp:
         pci_free_consistent(adapter->pdev, rsp_size, prsp, cardrsp_phys_addr);
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index e45ce2951729..c0bd40fcf708 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -136,11 +136,9 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
                 ecmd->port = PORT_TP;
 
-                if (netif_running(dev)) {
-                        ecmd->speed = adapter->link_speed;
-                        ecmd->duplex = adapter->link_duplex;
-                        ecmd->autoneg = adapter->link_autoneg;
-                }
+                ecmd->speed = adapter->link_speed;
+                ecmd->duplex = adapter->link_duplex;
+                ecmd->autoneg = adapter->link_autoneg;
 
         } else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
                 u32 val;
@@ -171,7 +169,7 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
         } else
                 return -EIO;
 
-        ecmd->phy_address = adapter->portnum;
+        ecmd->phy_address = adapter->physical_port;
         ecmd->transceiver = XCVR_EXTERNAL;
 
         switch ((netxen_brdtype_t) boardinfo->board_type) {
@@ -180,13 +178,13 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
         case NETXEN_BRDTYPE_P3_REF_QG:
         case NETXEN_BRDTYPE_P3_4_GB:
         case NETXEN_BRDTYPE_P3_4_GB_MM:
-        case NETXEN_BRDTYPE_P3_10000_BASE_T:
 
                 ecmd->supported |= SUPPORTED_Autoneg;
                 ecmd->advertising |= ADVERTISED_Autoneg;
         case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
         case NETXEN_BRDTYPE_P3_10G_CX4:
         case NETXEN_BRDTYPE_P3_10G_CX4_LP:
+        case NETXEN_BRDTYPE_P3_10000_BASE_T:
                 ecmd->supported |= SUPPORTED_TP;
                 ecmd->advertising |= ADVERTISED_TP;
                 ecmd->port = PORT_TP;
@@ -204,16 +202,33 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
                 ecmd->port = PORT_FIBRE;
                 ecmd->autoneg = AUTONEG_DISABLE;
                 break;
-        case NETXEN_BRDTYPE_P2_SB31_10G:
         case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
         case NETXEN_BRDTYPE_P3_10G_SFP_CT:
         case NETXEN_BRDTYPE_P3_10G_SFP_QT:
+                ecmd->advertising |= ADVERTISED_TP;
+                ecmd->supported |= SUPPORTED_TP;
+        case NETXEN_BRDTYPE_P2_SB31_10G:
         case NETXEN_BRDTYPE_P3_10G_XFP:
                 ecmd->supported |= SUPPORTED_FIBRE;
                 ecmd->advertising |= ADVERTISED_FIBRE;
                 ecmd->port = PORT_FIBRE;
                 ecmd->autoneg = AUTONEG_DISABLE;
                 break;
+        case NETXEN_BRDTYPE_P3_10G_TP:
+                if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
+                        ecmd->autoneg = AUTONEG_DISABLE;
+                        ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
+                        ecmd->advertising |=
+                                (ADVERTISED_FIBRE | ADVERTISED_TP);
+                        ecmd->port = PORT_FIBRE;
+                } else {
+                        ecmd->autoneg = AUTONEG_ENABLE;
+                        ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
+                        ecmd->advertising |=
+                                (ADVERTISED_TP | ADVERTISED_Autoneg);
+                        ecmd->port = PORT_TP;
+                }
+                break;
         default:
                 printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
                        (netxen_brdtype_t) boardinfo->board_type);
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index aa6e603bfcbf..821cff68b3f3 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -503,17 +503,15 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 
         i = 0;
 
+        netif_tx_lock_bh(adapter->netdev);
+
         producer = adapter->cmd_producer;
         do {
                 cmd_desc = &cmd_desc_arr[i];
 
                 pbuf = &adapter->cmd_buf_arr[producer];
-                pbuf->mss = 0;
-                pbuf->total_length = 0;
                 pbuf->skb = NULL;
-                pbuf->cmd = 0;
                 pbuf->frag_count = 0;
-                pbuf->port = 0;
 
                 /* adapter->ahw.cmd_desc_head[producer] = *cmd_desc; */
                 memcpy(&adapter->ahw.cmd_desc_head[producer],
@@ -531,6 +529,8 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 
         netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
 
+        netif_tx_unlock_bh(adapter->netdev);
+
         return 0;
 }
 
@@ -539,16 +539,19 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev,
 {
         struct netxen_adapter *adapter = netdev_priv(dev);
         nx_nic_req_t req;
-        nx_mac_req_t mac_req;
+        nx_mac_req_t *mac_req;
+        u64 word;
         int rv;
 
         memset(&req, 0, sizeof(nx_nic_req_t));
-        req.qhdr |= (NX_NIC_REQUEST << 23);
-        req.req_hdr |= NX_MAC_EVENT;
-        req.req_hdr |= ((u64)adapter->portnum << 16);
-        mac_req.op = op;
-        memcpy(&mac_req.mac_addr, addr, 6);
-        req.words[0] = cpu_to_le64(*(u64 *)&mac_req);
+        req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
+
+        word = NX_MAC_EVENT | ((u64)adapter->portnum << 16);
+        req.req_hdr = cpu_to_le64(word);
+
+        mac_req = (nx_mac_req_t *)&req.words[0];
+        mac_req->op = op;
+        memcpy(mac_req->mac_addr, addr, 6);
 
         rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
         if (rv != 0) {
@@ -612,18 +615,35 @@ send_fw_cmd:
 int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 {
         nx_nic_req_t req;
+        u64 word;
 
         memset(&req, 0, sizeof(nx_nic_req_t));
 
-        req.qhdr |= (NX_HOST_REQUEST << 23);
-        req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE;
-        req.req_hdr |= ((u64)adapter->portnum << 16);
+        req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+        word = NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE |
+                        ((u64)adapter->portnum << 16);
+        req.req_hdr = cpu_to_le64(word);
+
         req.words[0] = cpu_to_le64(mode);
 
         return netxen_send_cmd_descs(adapter,
                                 (struct cmd_desc_type0 *)&req, 1);
 }
 
+void netxen_p3_free_mac_list(struct netxen_adapter *adapter)
+{
+        nx_mac_list_t *cur, *next;
+
+        cur = adapter->mac_list;
+
+        while (cur) {
+                next = cur->next;
+                kfree(cur);
+                cur = next;
+        }
+}
+
 #define NETXEN_CONFIG_INTR_COALESCE     3
 
 /*
@@ -632,13 +652,15 @@ int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
 {
         nx_nic_req_t req;
+        u64 word;
         int rv;
 
         memset(&req, 0, sizeof(nx_nic_req_t));
 
-        req.qhdr |= (NX_NIC_REQUEST << 23);
-        req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
-        req.req_hdr |= ((u64)adapter->portnum << 16);
+        req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
+
+        word = NETXEN_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
+        req.req_hdr = cpu_to_le64(word);
 
         memcpy(&req.words[0], &adapter->coal, sizeof(adapter->coal));
 
@@ -772,13 +794,10 @@ int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
         adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
         adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
 
-        mac_hi = cpu_to_le32(mac_hi);
-        mac_lo = cpu_to_le32(mac_lo);
-
         if (pci_func & 1)
-                *mac = ((mac_lo >> 16) | ((u64)mac_hi << 16));
+                *mac = le64_to_cpu((mac_lo >> 16) | ((u64)mac_hi << 16));
         else
-                *mac = ((mac_lo) | ((u64)mac_hi << 32));
+                *mac = le64_to_cpu((u64)mac_lo | ((u64)mac_hi << 32));
 
         return 0;
 }
@@ -937,7 +956,7 @@ int netxen_load_firmware(struct netxen_adapter *adapter)
 {
         int i;
         u32 data, size = 0;
-        u32 flashaddr = NETXEN_BOOTLD_START, memaddr = NETXEN_BOOTLD_START;
+        u32 flashaddr = NETXEN_BOOTLD_START;
 
         size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START)/4;
 
@@ -949,10 +968,8 @@ int netxen_load_firmware(struct netxen_adapter *adapter)
                 if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0)
                         return -EIO;
 
-                adapter->pci_mem_write(adapter, memaddr, &data, 4);
+                adapter->pci_mem_write(adapter, flashaddr, &data, 4);
                 flashaddr += 4;
-                memaddr += 4;
-                cond_resched();
         }
         msleep(1);
 
@@ -2034,7 +2051,13 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
                 rv = -1;
         }
 
-        DPRINTK(INFO, "Discovered board type:0x%x  ", boardinfo->board_type);
+        if (boardinfo->board_type == NETXEN_BRDTYPE_P3_4_GB_MM) {
+                u32 gpio = netxen_nic_reg_read(adapter,
+                                NETXEN_ROMUSB_GLB_PAD_GPIO_I);
+                if ((gpio & 0x8000) == 0)
+                        boardinfo->board_type = NETXEN_BRDTYPE_P3_10G_TP;
+        }
+
         switch ((netxen_brdtype_t) boardinfo->board_type) {
         case NETXEN_BRDTYPE_P2_SB35_4G:
                 adapter->ahw.board_type = NETXEN_NIC_GBE;
@@ -2053,7 +2076,6 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
         case NETXEN_BRDTYPE_P3_10G_SFP_QT:
         case NETXEN_BRDTYPE_P3_10G_XFP:
         case NETXEN_BRDTYPE_P3_10000_BASE_T:
-
                 adapter->ahw.board_type = NETXEN_NIC_XGBE;
                 break;
         case NETXEN_BRDTYPE_P1_BD:
@@ -2063,9 +2085,12 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
         case NETXEN_BRDTYPE_P3_REF_QG:
         case NETXEN_BRDTYPE_P3_4_GB:
         case NETXEN_BRDTYPE_P3_4_GB_MM:
-
                 adapter->ahw.board_type = NETXEN_NIC_GBE;
                 break;
+        case NETXEN_BRDTYPE_P3_10G_TP:
+                adapter->ahw.board_type = (adapter->portnum < 2) ?
+                        NETXEN_NIC_XGBE : NETXEN_NIC_GBE;
+                break;
         default:
                 printk("%s: Unknown(%x)\n", netxen_nic_driver_name,
                        boardinfo->board_type);
@@ -2110,12 +2135,16 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 {
         __u32 status;
         __u32 autoneg;
-        __u32 mode;
         __u32 port_mode;
 
-        netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode);
-        if (netxen_get_niu_enable_ge(mode)) {   /* Gb 10/100/1000 Mbps mode */
+        if (!netif_carrier_ok(adapter->netdev)) {
+                adapter->link_speed   = 0;
+                adapter->link_duplex  = -1;
+                adapter->link_autoneg = AUTONEG_ENABLE;
+                return;
+        }
 
+        if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
                 adapter->hw_read_wx(adapter,
                                 NETXEN_PORT_MODE_ADDR, &port_mode, 4);
                 if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
@@ -2141,7 +2170,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
                                         adapter->link_speed = SPEED_1000;
                                         break;
                                 default:
-                                        adapter->link_speed = -1;
+                                        adapter->link_speed = 0;
                                         break;
                                 }
                                 switch (netxen_get_phy_duplex(status)) {
@@ -2164,7 +2193,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
                                 goto link_down;
                 } else {
                       link_down:
-                        adapter->link_speed = -1;
+                        adapter->link_speed = 0;
                         adapter->link_duplex = -1;
                 }
         }
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index d924468e506e..ca7c8d8050c9 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -308,7 +308,6 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
                         }
                         memset(rds_ring->rx_buf_arr, 0, RCV_BUFFSIZE);
                         INIT_LIST_HEAD(&rds_ring->free_list);
-                        rds_ring->begin_alloc = 0;
                         /*
                          * Now go through all of them, set reference handles
                          * and put them in the queues.
@@ -439,6 +438,8 @@ static int netxen_wait_rom_done(struct netxen_adapter *adapter)
         long timeout = 0;
         long done = 0;
 
+        cond_resched();
+
         while (done == 0) {
                 done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS);
                 done &= 2;
@@ -533,12 +534,9 @@ static int do_rom_fast_write(struct netxen_adapter *adapter, int addr,
 static int do_rom_fast_read(struct netxen_adapter *adapter,
                             int addr, int *valp)
 {
-        cond_resched();
-
         netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
-        netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
-        udelay(100);            /* prevent bursting on CRB */
         netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+        netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
         netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
         if (netxen_wait_rom_done(adapter)) {
                 printk("Error waiting for rom done\n");
@@ -546,7 +544,7 @@ static int do_rom_fast_read(struct netxen_adapter *adapter,
         }
         /* reset abyte_cnt and dummy_byte_cnt */
         netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
-        udelay(100);            /* prevent bursting on CRB */
+        udelay(10);
         netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
 
         *valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA);
@@ -884,14 +882,16 @@ int netxen_flash_unlock(struct netxen_adapter *adapter)
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 {
         int addr, val;
-        int i, init_delay = 0;
+        int i, n, init_delay = 0;
         struct crb_addr_pair *buf;
-        unsigned offset, n;
+        unsigned offset;
         u32 off;
 
         /* resetall */
+        rom_lock(adapter);
         netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
                                     0xffffffff);
+        netxen_rom_unlock(adapter);
 
         if (verbose) {
                 if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
@@ -910,7 +910,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 
         if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
                 if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
-                        (n != 0xcafecafeUL) ||
+                        (n != 0xcafecafe) ||
                         netxen_rom_fast_read(adapter, 4, &n) != 0) {
                         printk(KERN_ERR "%s: ERROR Reading crb_init area: "
                                         "n: %08x\n", netxen_nic_driver_name, n);
@@ -975,6 +975,14 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
                         /* do not reset PCI */
                         if (off == (ROMUSB_GLB + 0xbc))
                                 continue;
+                        if (off == (ROMUSB_GLB + 0xa8))
+                                continue;
+                        if (off == (ROMUSB_GLB + 0xc8)) /* core clock */
+                                continue;
+                        if (off == (ROMUSB_GLB + 0x24)) /* MN clock */
+                                continue;
+                        if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
+                                continue;
                         if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
                                 buf[i].data = 0x1020;
                         /* skip the function enable register */
@@ -992,23 +1000,21 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
                         continue;
                 }
 
+                init_delay = 1;
                 /* After writing this register, HW needs time for CRB */
                 /* to quiet down (else crb_window returns 0xffffffff) */
                 if (off == NETXEN_ROMUSB_GLB_SW_RESET) {
-                        init_delay = 1;
+                        init_delay = 1000;
                         if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
                                 /* hold xdma in reset also */
                                 buf[i].data = NETXEN_NIC_XDMA_RESET;
+                                buf[i].data = 0x8000ff;
                         }
                 }
 
                 adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
 
-                if (init_delay == 1) {
-                        msleep(1000);
-                        init_delay = 0;
-                }
-                msleep(1);
+                msleep(init_delay);
         }
         kfree(buf);
 
@@ -1277,7 +1283,7 @@ static void netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
 
                 dev_kfree_skb_any(skb);
                 for (i = 0; i < nr_frags; i++) {
-                        index = frag_desc->frag_handles[i];
+                        index = le16_to_cpu(frag_desc->frag_handles[i]);
                         skb = netxen_process_rxbuf(adapter,
                                         rds_ring, index, cksum);
                         if (skb)
@@ -1428,7 +1434,6 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
         struct rcv_desc *pdesc;
         struct netxen_rx_buffer *buffer;
         int count = 0;
-        int index = 0;
         netxen_ctx_msg msg = 0;
         dma_addr_t dma;
         struct list_head *head;
@@ -1436,7 +1441,6 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
         rds_ring = &recv_ctx->rds_rings[ringid];
 
         producer = rds_ring->producer;
-        index = rds_ring->begin_alloc;
         head = &rds_ring->free_list;
 
         /* We can start writing rx descriptors into the phantom memory. */
@@ -1444,39 +1448,37 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 
                 skb = dev_alloc_skb(rds_ring->skb_size);
                 if (unlikely(!skb)) {
-                        rds_ring->begin_alloc = index;
                         break;
                 }
 
+                if (!adapter->ahw.cut_through)
+                        skb_reserve(skb, 2);
+
+                dma = pci_map_single(pdev, skb->data,
+                                rds_ring->dma_size, PCI_DMA_FROMDEVICE);
+                if (pci_dma_mapping_error(pdev, dma)) {
+                        dev_kfree_skb_any(skb);
+                        break;
+                }
+
+                count++;
                 buffer = list_entry(head->next, struct netxen_rx_buffer, list);
                 list_del(&buffer->list);
 
-                count++;        /* now there should be no failure */
-                pdesc = &rds_ring->desc_head[producer];
-
-                if (!adapter->ahw.cut_through)
-                        skb_reserve(skb, 2);
-                /* This will be setup when we receive the
-                 * buffer after it has been filled  FSL  TBD TBD
-                 * skb->dev = netdev;
-                 */
-                dma = pci_map_single(pdev, skb->data, rds_ring->dma_size,
-                                     PCI_DMA_FROMDEVICE);
-                pdesc->addr_buffer = cpu_to_le64(dma);
                 buffer->skb = skb;
                 buffer->state = NETXEN_BUFFER_BUSY;
                 buffer->dma = dma;
+
                 /* make a rcv descriptor  */
+                pdesc = &rds_ring->desc_head[producer];
+                pdesc->addr_buffer = cpu_to_le64(dma);
                 pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
                 pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
-                DPRINTK(INFO, "done writing descripter\n");
-                producer =
-                    get_next_index(producer, rds_ring->max_rx_desc_count);
-                index = get_next_index(index, rds_ring->max_rx_desc_count);
+
+                producer = get_next_index(producer, rds_ring->max_rx_desc_count);
         }
         /* if we did allocate buffers, then write the count to Phantom */
         if (count) {
-                rds_ring->begin_alloc = index;
                 rds_ring->producer = producer;
                         /* Window = 1 */
                 adapter->pci_write_normalize(adapter,
@@ -1515,49 +1517,50 @@ static void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
         struct rcv_desc *pdesc;
         struct netxen_rx_buffer *buffer;
         int count = 0;
-        int index = 0;
         struct list_head *head;
+        dma_addr_t dma;
 
         rds_ring = &recv_ctx->rds_rings[ringid];
 
         producer = rds_ring->producer;
-        index = rds_ring->begin_alloc;
         head = &rds_ring->free_list;
         /* We can start writing rx descriptors into the phantom memory. */
         while (!list_empty(head)) {
 
                 skb = dev_alloc_skb(rds_ring->skb_size);
                 if (unlikely(!skb)) {
-                        rds_ring->begin_alloc = index;
                         break;
                 }
 
+                if (!adapter->ahw.cut_through)
+                        skb_reserve(skb, 2);
+
+                dma = pci_map_single(pdev, skb->data,
+                                rds_ring->dma_size, PCI_DMA_FROMDEVICE);
+                if (pci_dma_mapping_error(pdev, dma)) {
+                        dev_kfree_skb_any(skb);
+                        break;
+                }
+
+                count++;
                 buffer = list_entry(head->next, struct netxen_rx_buffer, list);
                 list_del(&buffer->list);
 
-                count++;        /* now there should be no failure */
-                pdesc = &rds_ring->desc_head[producer];
-                if (!adapter->ahw.cut_through)
-                        skb_reserve(skb, 2);
                 buffer->skb = skb;
                 buffer->state = NETXEN_BUFFER_BUSY;
-                buffer->dma = pci_map_single(pdev, skb->data,
-                                             rds_ring->dma_size,
-                                             PCI_DMA_FROMDEVICE);
+                buffer->dma = dma;
 
                 /* make a rcv descriptor  */
+                pdesc = &rds_ring->desc_head[producer];
                 pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
                 pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
                 pdesc->addr_buffer = cpu_to_le64(buffer->dma);
-                producer =
-                    get_next_index(producer, rds_ring->max_rx_desc_count);
-                index = get_next_index(index, rds_ring->max_rx_desc_count);
-                buffer = &rds_ring->rx_buf_arr[index];
+
+                producer = get_next_index(producer, rds_ring->max_rx_desc_count);
         }
 
         /* if we did allocate buffers, then write the count to Phantom */
         if (count) {
-                rds_ring->begin_alloc = index;
                 rds_ring->producer = producer;
                         /* Window = 1 */
                 adapter->pci_write_normalize(adapter,
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index ba01524b5531..d854f07ef4d3 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -39,7 +39,9 @@
 #include "netxen_nic_phan_reg.h"
 
 #include <linux/dma-mapping.h>
+#include <linux/if_vlan.h>
 #include <net/ip.h>
+#include <linux/ipv6.h>
 
 MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
 MODULE_LICENSE("GPL");
@@ -242,7 +244,7 @@ static void netxen_check_options(struct netxen_adapter *adapter)
         case NETXEN_BRDTYPE_P3_4_GB:
         case NETXEN_BRDTYPE_P3_4_GB_MM:
                 adapter->msix_supported = !!use_msi_x;
-                adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+                adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
                 break;
 
         case NETXEN_BRDTYPE_P2_SB35_4G:
@@ -251,6 +253,14 @@ static void netxen_check_options(struct netxen_adapter *adapter)
                 adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
                 break;
 
+        case NETXEN_BRDTYPE_P3_10G_TP:
+                adapter->msix_supported = !!use_msi_x;
+                if (adapter->ahw.board_type == NETXEN_NIC_XGBE)
+                        adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+                else
+                        adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
+                break;
+
         default:
                 adapter->msix_supported = 0;
                 adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
@@ -271,10 +281,15 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 static int
 netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
 {
-        int ret = 0;
+        u32 val, timeout;
 
         if (first_boot == 0x55555555) {
                 /* This is the first boot after power up */
+                adapter->pci_write_normalize(adapter,
+                        NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
+
+                if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
+                        return 0;
 
                 /* PCI bus master workaround */
                 adapter->hw_read_wx(adapter,
@@ -294,18 +309,26 @@ netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
                         /* clear the register for future unloads/loads */
                         adapter->pci_write_normalize(adapter,
                                         NETXEN_CAM_RAM(0x1fc), 0);
-                        ret = -1;
+                        return -EIO;
                 }
 
-                if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-                        /* Start P2 boot loader */
-                        adapter->pci_write_normalize(adapter,
-                                NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
-                        adapter->pci_write_normalize(adapter,
-                                        NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
-                }
+                /* Start P2 boot loader */
+                val = adapter->pci_read_normalize(adapter,
+                                NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
+                adapter->pci_write_normalize(adapter,
+                                NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
+                timeout = 0;
+                do {
+                        msleep(1);
+                        val = adapter->pci_read_normalize(adapter,
+                                        NETXEN_CAM_RAM(0x1fc));
+
+                        if (++timeout > 5000)
+                                return -EIO;
+
+                } while (val == NETXEN_BDINFO_MAGIC);
         }
-        return ret;
+        return 0;
 }
 
 static void netxen_set_port_mode(struct netxen_adapter *adapter)
@@ -784,8 +807,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
                                                 CRB_CMDPEG_STATE, 0);
                         netxen_pinit_from_rom(adapter, 0);
                         msleep(1);
-                        netxen_load_firmware(adapter);
                 }
+                netxen_load_firmware(adapter);
 
                 if (NX_IS_REVISION_P3(revision_id))
                         netxen_pcie_strap_init(adapter);
@@ -801,13 +824,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
                 }
 
-                if ((first_boot == 0x55555555) &&
-                        (NX_IS_REVISION_P2(revision_id))) {
-                        /* Unlock the HW, prompting the boot sequence */
-                        adapter->pci_write_normalize(adapter,
-                                        NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
-                }
-
                 err = netxen_initialize_adapter_offload(adapter);
                 if (err)
                         goto err_out_iounmap;
@@ -821,7 +837,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
                 adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, i);
 
                 /* Handshake with the card before we register the devices. */
-                netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+                err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+                if (err)
+                        goto err_out_free_offload;
 
         }       /* first_driver */
 
@@ -925,6 +943,7 @@ err_out_disable_msi:
         if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
                 pci_disable_msi(pdev);
 
+err_out_free_offload:
         if (first_driver)
                 netxen_free_adapter_offload(adapter);
 
@@ -968,6 +987,9 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
                 netxen_free_hw_resources(adapter);
                 netxen_release_rx_buffers(adapter);
                 netxen_free_sw_resources(adapter);
+
+                if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+                        netxen_p3_free_mac_list(adapter);
         }
 
         if (adapter->portnum == 0)
@@ -983,8 +1005,10 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
         iounmap(adapter->ahw.db_base);
         iounmap(adapter->ahw.pci_base0);
-        iounmap(adapter->ahw.pci_base1);
-        iounmap(adapter->ahw.pci_base2);
+        if (adapter->ahw.pci_base1 != NULL)
+                iounmap(adapter->ahw.pci_base1);
+        if (adapter->ahw.pci_base2 != NULL)
+                iounmap(adapter->ahw.pci_base2);
 
         pci_release_regions(pdev);
         pci_disable_device(pdev);
@@ -1137,29 +1161,64 @@ static int netxen_nic_close(struct net_device *netdev)
         return 0;
 }
 
-void netxen_tso_check(struct netxen_adapter *adapter,
+static bool netxen_tso_check(struct net_device *netdev,
                       struct cmd_desc_type0 *desc, struct sk_buff *skb)
 {
-        if (desc->mss) {
-                desc->total_hdr_length = (sizeof(struct ethhdr) +
-                                          ip_hdrlen(skb) + tcp_hdrlen(skb));
+        bool tso = false;
+        u8 opcode = TX_ETHER_PKT;
 
-                if ((NX_IS_REVISION_P3(adapter->ahw.revision_id)) &&
-                                (skb->protocol == htons(ETH_P_IPV6)))
-                        netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO6);
-                else
-                        netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO);
+        if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
+                        skb_shinfo(skb)->gso_size > 0) {
+
+                desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+                desc->total_hdr_length =
+                        skb_transport_offset(skb) + tcp_hdrlen(skb);
+
+                opcode = (skb->protocol == htons(ETH_P_IPV6)) ?
+                                TX_TCP_LSO6 : TX_TCP_LSO;
+                tso = true;
 
         } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-                if (ip_hdr(skb)->protocol == IPPROTO_TCP)
-                        netxen_set_cmd_desc_opcode(desc, TX_TCP_PKT);
-                else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
-                        netxen_set_cmd_desc_opcode(desc, TX_UDP_PKT);
-                else
-                        return;
+                u8 l4proto;
+
+                if (skb->protocol == htons(ETH_P_IP)) {
+                        l4proto = ip_hdr(skb)->protocol;
+
+                        if (l4proto == IPPROTO_TCP)
+                                opcode = TX_TCP_PKT;
+                        else if(l4proto == IPPROTO_UDP)
+                                opcode = TX_UDP_PKT;
+                } else if (skb->protocol == htons(ETH_P_IPV6)) {
+                        l4proto = ipv6_hdr(skb)->nexthdr;
+
+                        if (l4proto == IPPROTO_TCP)
+                                opcode = TX_TCPV6_PKT;
+                        else if(l4proto == IPPROTO_UDP)
+                                opcode = TX_UDPV6_PKT;
+                }
         }
         desc->tcp_hdr_offset = skb_transport_offset(skb);
         desc->ip_hdr_offset = skb_network_offset(skb);
+        netxen_set_tx_flags_opcode(desc, 0, opcode);
+        return tso;
+}
+
+static void
+netxen_clean_tx_dma_mapping(struct pci_dev *pdev,
+                struct netxen_cmd_buffer *pbuf, int last)
+{
+        int k;
+        struct netxen_skb_frag *buffrag;
+
+        buffrag = &pbuf->frag_array[0];
+        pci_unmap_single(pdev, buffrag->dma,
+                        buffrag->length, PCI_DMA_TODEVICE);
+
+        for (k = 1; k < last; k++) {
+                buffrag = &pbuf->frag_array[k];
+                pci_unmap_page(pdev, buffrag->dma,
+                        buffrag->length, PCI_DMA_TODEVICE);
+        }
 }
 
 static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
@@ -1167,33 +1226,22 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
         struct netxen_adapter *adapter = netdev_priv(netdev);
         struct netxen_hardware_context *hw = &adapter->ahw;
         unsigned int first_seg_len = skb->len - skb->data_len;
+        struct netxen_cmd_buffer *pbuf;
         struct netxen_skb_frag *buffrag;
-        unsigned int i;
+        struct cmd_desc_type0 *hwdesc;
+        struct pci_dev *pdev = adapter->pdev;
+        dma_addr_t temp_dma;
+        int i, k;
 
         u32 producer, consumer;
-        u32 saved_producer = 0;
-        struct cmd_desc_type0 *hwdesc;
-        int k;
-        struct netxen_cmd_buffer *pbuf = NULL;
-        int frag_count;
-        int no_of_desc;
+        int frag_count, no_of_desc;
         u32 num_txd = adapter->max_tx_desc_count;
+        bool is_tso = false;
 
         frag_count = skb_shinfo(skb)->nr_frags + 1;
 
         /* There 4 fragments per descriptor */
         no_of_desc = (frag_count + 3) >> 2;
-        if (netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) {
-                if (skb_shinfo(skb)->gso_size > 0) {
-
-                        no_of_desc++;
-                        if ((ip_hdrlen(skb) + tcp_hdrlen(skb) +
-                             sizeof(struct ethhdr)) >
-                            (sizeof(struct cmd_desc_type0) - 2)) {
-                                no_of_desc++;
-                        }
-                }
-        }
 
         producer = adapter->cmd_producer;
         smp_mb();
@@ -1205,34 +1253,26 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
         }
 
         /* Copy the descriptors into the hardware    */
-        saved_producer = producer;
         hwdesc = &hw->cmd_desc_head[producer];
         memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
         /* Take skb->data itself */
         pbuf = &adapter->cmd_buf_arr[producer];
-        if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
-                        skb_shinfo(skb)->gso_size > 0) {
-                pbuf->mss = skb_shinfo(skb)->gso_size;
-                hwdesc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
-        } else {
-                pbuf->mss = 0;
-                hwdesc->mss = 0;
-        }
-        pbuf->total_length = skb->len;
+
+        is_tso = netxen_tso_check(netdev, hwdesc, skb);
+
         pbuf->skb = skb;
-        pbuf->cmd = TX_ETHER_PKT;
         pbuf->frag_count = frag_count;
-        pbuf->port = adapter->portnum;
         buffrag = &pbuf->frag_array[0];
-        buffrag->dma = pci_map_single(adapter->pdev, skb->data, first_seg_len,
+        temp_dma = pci_map_single(pdev, skb->data, first_seg_len,
                                       PCI_DMA_TODEVICE);
+        if (pci_dma_mapping_error(pdev, temp_dma))
+                goto drop_packet;
+
+        buffrag->dma = temp_dma;
         buffrag->length = first_seg_len;
-        netxen_set_cmd_desc_totallength(hwdesc, skb->len);
-        netxen_set_cmd_desc_num_of_buff(hwdesc, frag_count);
-        netxen_set_cmd_desc_opcode(hwdesc, TX_ETHER_PKT);
+        netxen_set_tx_frags_len(hwdesc, frag_count, skb->len);
+        netxen_set_tx_port(hwdesc, adapter->portnum);
 
-        netxen_set_cmd_desc_port(hwdesc, adapter->portnum);
-        netxen_set_cmd_desc_ctxid(hwdesc, adapter->portnum);
         hwdesc->buffer1_length = cpu_to_le16(first_seg_len);
         hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
 
@@ -1240,7 +1280,6 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
                 struct skb_frag_struct *frag;
                 int len, temp_len;
                 unsigned long offset;
-                dma_addr_t temp_dma;
 
                 /* move to next desc. if there is a need */
                 if ((i & 0x3) == 0) {
@@ -1256,8 +1295,12 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
                 offset = frag->page_offset;
 
                 temp_len = len;
-                temp_dma = pci_map_page(adapter->pdev, frag->page, offset,
+                temp_dma = pci_map_page(pdev, frag->page, offset,
                                         len, PCI_DMA_TODEVICE);
+                if (pci_dma_mapping_error(pdev, temp_dma)) {
+                        netxen_clean_tx_dma_mapping(pdev, pbuf, i);
+                        goto drop_packet;
+                }
 
                 buffrag++;
                 buffrag->dma = temp_dma;
@@ -1285,16 +1328,12 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
         }
         producer = get_next_index(producer, num_txd);
 
-        /* might change opcode to TX_TCP_LSO */
-        netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb);
-
         /* For LSO, we need to copy the MAC/IP/TCP headers into
          * the descriptor ring
          */
-        if (netxen_get_cmd_desc_opcode(&hw->cmd_desc_head[saved_producer])
-            == TX_TCP_LSO) {
+        if (is_tso) {
                 int hdr_len, first_hdr_len, more_hdr;
-                hdr_len = hw->cmd_desc_head[saved_producer].total_hdr_length;
+                hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
                 if (hdr_len > (sizeof(struct cmd_desc_type0) - 2)) {
                         first_hdr_len = sizeof(struct cmd_desc_type0) - 2;
                         more_hdr = 1;
@@ -1336,6 +1375,11 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
         netdev->trans_start = jiffies;
 
         return NETDEV_TX_OK;
+
+drop_packet:
+        adapter->stats.txdropped++;
+        dev_kfree_skb_any(skb);
+        return NETDEV_TX_OK;
 }
 
 static int netxen_nic_check_temp(struct netxen_adapter *adapter)
@@ -1407,6 +1451,8 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
                         netif_carrier_off(netdev);
                         netif_stop_queue(netdev);
                 }
+
+                netxen_nic_set_link_parameters(adapter);
         } else if (!adapter->ahw.linkup && linkup) {
                 printk(KERN_INFO "%s: %s NIC Link is up\n",
                        netxen_nic_driver_name, netdev->name);
@@ -1415,6 +1461,8 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
                         netif_carrier_on(netdev);
                         netif_wake_queue(netdev);
                 }
+
+                netxen_nic_set_link_parameters(adapter);
         }
 }
 
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 5b7a574ce571..d0349e7d73ea 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -712,7 +712,7 @@ static inline void pasemi_mac_rx_error(const struct pasemi_mac *mac,
         rcmdsta = read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if));
         ccmdsta = read_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(chan->chno));
 
-        printk(KERN_ERR "pasemi_mac: rx error. macrx %016lx, rx status %lx\n",
+        printk(KERN_ERR "pasemi_mac: rx error. macrx %016llx, rx status %llx\n",
                 macrx, *chan->status);
 
         printk(KERN_ERR "pasemi_mac: rcmdsta %08x ccmdsta %08x\n",
@@ -730,8 +730,8 @@ static inline void pasemi_mac_tx_error(const struct pasemi_mac *mac,
 
         cmdsta = read_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(chan->chno));
 
-        printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016lx, "\
-                "tx status 0x%016lx\n", mactx, *chan->status);
+        printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016llx, "\
+                "tx status 0x%016llx\n", mactx, *chan->status);
 
         printk(KERN_ERR "pasemi_mac: tcmdsta 0x%08x\n", cmdsta);
 }
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e35460165bf7..0a06e4fd37d9 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -231,15 +231,6 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
         if ((phy_id & 0x1fffffff) == 0x1fffffff)
                 return NULL;
 
-        /*
-         * Broken hardware is sometimes missing the pull-up resistor on the
-         * MDIO line, which results in reads to non-existent devices returning
-         * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
-         * device as well.
-         */
-        if (phy_id == 0)
-                return NULL;
-
         dev = phy_device_create(bus, addr, phy_id);
 
         return dev;
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 06b448285eb5..7b2728b8f1b7 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -250,6 +250,7 @@ static int ppp_connect_channel(struct channel *pch, int unit);
 static int ppp_disconnect_channel(struct channel *pch);
 static void ppp_destroy_channel(struct channel *pch);
 static int unit_get(struct idr *p, void *ptr);
+static int unit_set(struct idr *p, void *ptr, int n);
 static void unit_put(struct idr *p, int n);
 static void *unit_find(struct idr *p, int n);
 
@@ -2432,11 +2433,18 @@ ppp_create_interface(int unit, int *retp)
         } else {
                 if (unit_find(&ppp_units_idr, unit))
                         goto out2; /* unit already exists */
-                else {
-                        /* darn, someone is cheating us? */
-                        *retp = -EINVAL;
+                /*
+                 * if caller need a specified unit number
+                 * lets try to satisfy him, otherwise --
+                 * he should better ask us for new unit number
+                 *
+                 * NOTE: yes I know that returning EEXIST it's not
+                 * fair but at least pppd will ask us to allocate
+                 * new unit in this case so user is happy :)
+                 */
+                unit = unit_set(&ppp_units_idr, ppp, unit);
+                if (unit < 0)
                         goto out2;
-                }
         }
 
         /* Initialize the new ppp unit */
@@ -2677,14 +2685,37 @@ static void __exit ppp_cleanup(void)
  * by holding all_ppp_mutex
  */
 
+/* associate pointer with specified number */
+static int unit_set(struct idr *p, void *ptr, int n)
+{
+        int unit, err;
+
+again:
+        if (!idr_pre_get(p, GFP_KERNEL)) {
+                printk(KERN_ERR "PPP: No free memory for idr\n");
+                return -ENOMEM;
+        }
+
+        err = idr_get_new_above(p, ptr, n, &unit);
+        if (err == -EAGAIN)
+                goto again;
+
+        if (unit != n) {
+                idr_remove(p, unit);
+                return -EINVAL;
+        }
+
+        return unit;
+}
+
 /* get new free unit number and associate pointer with it */
 static int unit_get(struct idr *p, void *ptr)
 {
         int unit, err;
 
 again:
-        if (idr_pre_get(p, GFP_KERNEL) == 0) {
-                printk(KERN_ERR "Out of memory expanding drawable idr\n");
+        if (!idr_pre_get(p, GFP_KERNEL)) {
+                printk(KERN_ERR "PPP: No free memory for idr\n");
                 return -ENOMEM;
         }
 
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 6cbefcae9ac2..be4465bc0a69 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -509,10 +509,10 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
         else
                 ret = sis900_get_mac_addr(pci_dev, net_dev);
 
-        if (ret == 0) {
-                printk(KERN_WARNING "%s: Cannot read MAC address.\n", dev_name);
-                ret = -ENODEV;
-                goto err_unmap_rx;
+        if (!ret || !is_valid_ether_addr(net_dev->dev_addr)) {
+                random_ether_addr(net_dev->dev_addr);
+                printk(KERN_WARNING "%s: Unreadable or invalid MAC address,"
+                                "using random generated one\n", dev_name);
         }
 
         /* 630ET : set the mii access mode as software-mode */
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index c4918b86ed19..0d0fa91c0251 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1297,6 +1297,7 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp)
         /* setup */
         spin_lock_irq(&serial->serial_lock);
         tty->driver_data = serial;
+        tty_kref_put(serial->tty);
         serial->tty = tty_kref_get(tty);
         spin_unlock_irq(&serial->serial_lock);
 
@@ -1792,8 +1793,8 @@ static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
 
         /* initialize */
         ctrl_req->wValue = 0;
-        ctrl_req->wIndex = hso_port_to_mux(port);
-        ctrl_req->wLength = size;
+        ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
+        ctrl_req->wLength = cpu_to_le16(size);
 
         if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
                 /* Reading command */
@@ -2043,9 +2044,8 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
                 return -2;
         }
 
-        spin_lock(&serial->serial_lock);
+        /* All callers to put_rxbuf_data hold serial_lock */
         tty = tty_kref_get(serial->tty);
-        spin_unlock(&serial->serial_lock);
 
         /* Push data to tty */
         if (tty) {
@@ -2053,8 +2053,10 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
                         serial->curr_rx_urb_offset;
                 D1("data to push to tty");
                 while (write_length_remaining) {
-                        if (test_bit(TTY_THROTTLED, &tty->flags))
+                        if (test_bit(TTY_THROTTLED, &tty->flags)) {
+                                tty_kref_put(tty);
                                 return -1;
+                        }
                         curr_write_len =  tty_insert_flip_string
                                 (tty, urb->transfer_buffer +
                                  serial->curr_rx_urb_offset,
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 2dc241689d37..0dbd85b0162d 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -622,7 +622,7 @@ static void hss_hdlc_rx_irq(void *pdev)
         printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
 #endif
         qmgr_disable_irq(queue_ids[port->id].rx);
-        netif_rx_schedule(dev, &port->napi);
+        netif_rx_schedule(&port->napi);
 }
 
 static int hss_hdlc_poll(struct napi_struct *napi, int budget)
@@ -651,7 +651,7 @@ static int hss_hdlc_poll(struct napi_struct *napi, int budget)
                         printk(KERN_DEBUG "%s: hss_hdlc_poll"
                                " netif_rx_complete\n", dev->name);
 #endif
-                        netif_rx_complete(dev, napi);
+                        netif_rx_complete(napi);
                         qmgr_enable_irq(rxq);
                         if (!qmgr_stat_empty(rxq) &&
                             netif_rx_reschedule(napi)) {
@@ -1069,7 +1069,7 @@ static int hss_hdlc_open(struct net_device *dev)
         hss_start_hdlc(port);
 
         /* we may already have RX data, enables IRQ */
-        netif_rx_schedule(dev, &port->napi);
+        netif_rx_schedule(&port->napi);
         return 0;
 
 err_unlock:
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index ea543fcf2687..e4f9f747de88 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -111,7 +111,7 @@ config WLAN_80211
           lets you choose drivers.
 
 config PCMCIA_RAYCS
-        tristate "Aviator/Raytheon 2.4MHz wireless support"
+        tristate "Aviator/Raytheon 2.4GHz wireless support"
         depends on PCMCIA && WLAN_80211
         select WIRELESS_EXT
         ---help---
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 4af2607deec0..8ef87356e083 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -2644,7 +2644,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
                 if (skb_headroom(skb) < padsize) {
                         ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
                                   " headroom to pad %d\n", hdrlen, padsize);
-                        return -1;
+                        return NETDEV_TX_BUSY;
                 }
                 skb_push(skb, padsize);
                 memmove(skb->data, skb->data+padsize, hdrlen);
@@ -2655,7 +2655,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
                 ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
                 spin_unlock_irqrestore(&sc->txbuflock, flags);
                 ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
-                return -1;
+                return NETDEV_TX_BUSY;
         }
         bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
         list_del(&bf->list);
@@ -2673,10 +2673,10 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
                 sc->txbuf_len++;
                 spin_unlock_irqrestore(&sc->txbuflock, flags);
                 dev_kfree_skb_any(skb);
-                return 0;
+                return NETDEV_TX_OK;
         }
 
-        return 0;
+        return NETDEV_TX_OK;
 }
 
 static int
diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c
index 0cac05c6a9ce..75eb9f43c741 100644
--- a/drivers/net/wireless/ath5k/pcu.c
+++ b/drivers/net/wireless/ath5k/pcu.c
@@ -65,7 +65,7 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah)
                 if (ah->ah_version == AR5K_AR5210)
                         pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
                 else
-                        AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
+                        AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
                 break;
 
         case NL80211_IFTYPE_AP:
@@ -75,7 +75,7 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah)
                 if (ah->ah_version == AR5K_AR5210)
                         pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
                 else
-                        AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
+                        AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
                 break;
 
         case NL80211_IFTYPE_STATION:
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 91aaeaf88199..9189ab13286c 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -73,7 +73,7 @@
 #define AR5K_CFG_SWRD           0x00000004      /* Byte-swap RX descriptor */
 #define AR5K_CFG_SWRB           0x00000008      /* Byte-swap RX buffer */
 #define AR5K_CFG_SWRG           0x00000010      /* Byte-swap Register access */
-#define AR5K_CFG_ADHOC          0x00000020      /* AP/Adhoc indication [5211+] */
+#define AR5K_CFG_IBSS           0x00000020      /* 0-BSS, 1-IBSS [5211+] */
 #define AR5K_CFG_PHY_OK         0x00000100      /* [5211+] */
 #define AR5K_CFG_EEBS           0x00000200      /* EEPROM is busy */
 #define AR5K_CFG_CLKGD          0x00000400      /* Clock gated (Disable dynamic clock) */
diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath9k/Kconfig
index c43bd321f97f..90a8dd873786 100644
--- a/drivers/net/wireless/ath9k/Kconfig
+++ b/drivers/net/wireless/ath9k/Kconfig
@@ -1,6 +1,7 @@
 config ATH9K
         tristate "Atheros 802.11n wireless cards support"
         depends on PCI && MAC80211 && WLAN_80211
+        depends on RFKILL || RFKILL=n
         select MAC80211_LEDS
         select LEDS_CLASS
         select NEW_LEDS
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 191eec50dc75..727f067aca4f 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -2164,13 +2164,13 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
                                                     conf->ht.channel_type);
                 }
 
+                ath_update_chainmask(sc, conf->ht.enabled);
+
                 if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) {
                         DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
                         mutex_unlock(&sc->mutex);
                         return -EINVAL;
                 }
-
-                ath_update_chainmask(sc, conf->ht.enabled);
         }
 
         if (changed & IEEE80211_CONF_CHANGE_POWER)
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 3bfc3b90f256..c92f0c6e4adc 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -126,15 +126,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
                 tx_info->flags |= IEEE80211_TX_STAT_ACK;
         }
 
-        tx_info->status.rates[0].count = tx_status->retries;
-        if (tx_info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
-                /* Change idx from internal table index to MCS index */
-                int idx = tx_info->status.rates[0].idx;
-                struct ath_rate_table *rate_table = sc->cur_rate_table;
-                if (idx >= 0 && idx < rate_table->rate_cnt)
-                        tx_info->status.rates[0].idx =
-                                rate_table->info[idx].ratecode & 0x7f;
-        }
+        tx_info->status.rates[0].count = tx_status->retries + 1;
 
         hdrlen = ieee80211_get_hdrlen_from_skb(skb);
         padsize = hdrlen & 3;
@@ -264,25 +256,22 @@ static void assign_aggr_tid_seqno(struct sk_buff *skb,
         }
 
         /* Get seqno */
-
-        if (ieee80211_is_data(fc) && !is_pae(skb)) {
-                /* For HT capable stations, we save tidno for later use.
-                 * We also override seqno set by upper layer with the one
-                 * in tx aggregation state.
-                 *
-                 * If fragmentation is on, the sequence number is
-                 * not overridden, since it has been
-                 * incremented by the fragmentation routine.
-                 *
-                 * FIXME: check if the fragmentation threshold exceeds
-                 * IEEE80211 max.
-                 */
-                tid = ATH_AN_2_TID(an, bf->bf_tidno);
-                hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
-                                            IEEE80211_SEQ_SEQ_SHIFT);
-                bf->bf_seqno = tid->seq_next;
-                INCR(tid->seq_next, IEEE80211_SEQ_MAX);
-        }
+        /* For HT capable stations, we save tidno for later use.
+         * We also override seqno set by upper layer with the one
+         * in tx aggregation state.
+         *
+         * If fragmentation is on, the sequence number is
+         * not overridden, since it has been
+         * incremented by the fragmentation routine.
+         *
+         * FIXME: check if the fragmentation threshold exceeds
+         * IEEE80211 max.
+         */
+        tid = ATH_AN_2_TID(an, bf->bf_tidno);
+        hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
+                        IEEE80211_SEQ_SEQ_SHIFT);
+        bf->bf_seqno = tid->seq_next;
+        INCR(tid->seq_next, IEEE80211_SEQ_MAX);
 }
 
 static int setup_tx_flags(struct ath_softc *sc, struct sk_buff *skb,
@@ -1718,11 +1707,10 @@ static int ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf,
 
         /* Assign seqno, tidno */
 
-        if (bf_isht(bf) && (sc->sc_flags & SC_OP_TXAGGR))
+        if (ieee80211_is_data_qos(fc) && (sc->sc_flags & SC_OP_TXAGGR))
                 assign_aggr_tid_seqno(skb, bf);
 
         /* DMA setup */
-
         bf->bf_mpdu = skb;
 
         bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data,
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 7b31a327b24a..c788bad10661 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3261,7 +3261,7 @@ static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
         struct b43_wldev *down_dev;
         struct b43_wldev *d;
         int err;
-        bool gmode;
+        bool uninitialized_var(gmode);
         int prev_status;
 
         /* Find a device and PHY which supports the band. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index c1324e31d2f6..fb996c27a19b 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2465,7 +2465,7 @@ static void b43legacy_put_phy_into_reset(struct b43legacy_wldev *dev)
 static int b43legacy_switch_phymode(struct b43legacy_wl *wl,
                                       unsigned int new_mode)
 {
-        struct b43legacy_wldev *up_dev;
+        struct b43legacy_wldev *uninitialized_var(up_dev);
         struct b43legacy_wldev *down_dev;
         int err;
         bool gmode = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 8fdb34222c0a..45cfa1cf194a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2219,7 +2219,7 @@ int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv *priv)
                 /* set tx power value for all OFDM rates */
                 for (rate_index = 0; rate_index < IWL_OFDM_RATES;
                      rate_index++) {
-                        s32 power_idx;
+                        s32 uninitialized_var(power_idx);
                         int rc;
 
                         /* use channel group's clip-power table,
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 52966ffbef6e..ba997204c8d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -255,7 +255,7 @@ struct iwl_cmd_header {
  *        0x3)  54 Mbps
  *
  * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
- *  3-0:   10)  1 Mbps
+ *  6-0:   10)  1 Mbps
  *         20)  2 Mbps
  *         55)  5.5 Mbps
  *        110)  11 Mbps
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 01a2169cecec..8c71ad4f88c5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -51,6 +51,7 @@ const char *get_cmd_string(u8 cmd)
                 IWL_CMD(REPLY_REMOVE_STA);
                 IWL_CMD(REPLY_REMOVE_ALL_STA);
                 IWL_CMD(REPLY_WEPKEY);
+                IWL_CMD(REPLY_3945_RX);
                 IWL_CMD(REPLY_TX);
                 IWL_CMD(REPLY_RATE_SCALE);
                 IWL_CMD(REPLY_LEDS_CMD);
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index d1fc305de5fe..e7289e2e7f16 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -206,7 +206,7 @@ static int lbtf_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
          * there are no buffered multicast frames to send
          */
         ieee80211_stop_queues(priv->hw);
-        return 0;
+        return NETDEV_TX_OK;
 }
 
 static void lbtf_tx_work(struct work_struct *work)
diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c
index bc84e2792f8a..c3bb85e0251e 100644
--- a/drivers/net/wireless/orinoco/orinoco.c
+++ b/drivers/net/wireless/orinoco/orinoco.c
@@ -1610,6 +1610,16 @@ static void orinoco_rx_isr_tasklet(unsigned long data)
         struct orinoco_rx_data *rx_data, *temp;
         struct hermes_rx_descriptor *desc;
         struct sk_buff *skb;
+        unsigned long flags;
+
+        /* orinoco_rx requires the driver lock, and we also need to
+         * protect priv->rx_list, so just hold the lock over the
+         * lot.
+         *
+         * If orinoco_lock fails, we've unplugged the card. In this
+         * case just abort. */
+        if (orinoco_lock(priv, &flags) != 0)
+                return;
 
         /* extract desc and skb from queue */
         list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
@@ -1622,6 +1632,8 @@ static void orinoco_rx_isr_tasklet(unsigned long data)
 
                 kfree(desc);
         }
+
+        orinoco_unlock(priv, &flags);
 }
 
 /********************************************************************/
@@ -3645,12 +3657,22 @@ struct net_device
 void free_orinocodev(struct net_device *dev)
 {
         struct orinoco_private *priv = netdev_priv(dev);
+        struct orinoco_rx_data *rx_data, *temp;
 
-        /* No need to empty priv->rx_list: if the tasklet is scheduled
-         * when we call tasklet_kill it will run one final time,
-         * emptying the list */
+        /* If the tasklet is scheduled when we call tasklet_kill it
+         * will run one final time. However the tasklet will only
+         * drain priv->rx_list if the hw is still available. */
         tasklet_kill(&priv->rx_tasklet);
 
+        /* Explicitly drain priv->rx_list */
+        list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
+                list_del(&rx_data->list);
+
+                dev_kfree_skb(rx_data->skb);
+                kfree(rx_data->desc);
+                kfree(rx_data);
+        }
+
         unregister_pm_notifier(&priv->pm_notifier);
         orinoco_uncache_fw(priv);
 
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index f127602670ec..0b32215d3f5d 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -435,6 +435,7 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
         PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
         PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
         PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
+        PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 82354b974a04..c6a370fa9bcb 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -138,6 +138,7 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
         u8 *fw_version = NULL;
         size_t len;
         int i;
+        int maxlen;
 
         if (priv->rx_start)
                 return 0;
@@ -195,6 +196,16 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
                         else
                                 priv->rx_mtu = (size_t)
                                         0x620 - priv->tx_hdr_len;
+                        maxlen = priv->tx_hdr_len + /* USB devices */
+                                 sizeof(struct p54_rx_data) +
+                                 4 + /* rx alignment */
+                                 IEEE80211_MAX_FRAG_THRESHOLD;
+                        if (priv->rx_mtu > maxlen && PAGE_SIZE == 4096) {
+                                printk(KERN_INFO "p54: rx_mtu reduced from %d "
+                                                 "to %d\n", priv->rx_mtu,
+                                                 maxlen);
+                                priv->rx_mtu = maxlen;
+                        }
                         break;
                         }
                 case BR_CODE_EXPOSED_IF:
@@ -575,6 +586,7 @@ static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
         u16 freq = le16_to_cpu(hdr->freq);
         size_t header_len = sizeof(*hdr);
         u32 tsf32;
+        u8 rate = hdr->rate & 0xf;
 
         /*
          * If the device is in a unspecified state we have to
@@ -603,8 +615,11 @@ static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
         rx_status.qual = (100 * hdr->rssi) / 127;
         if (hdr->rate & 0x10)
                 rx_status.flag |= RX_FLAG_SHORTPRE;
-        rx_status.rate_idx = (dev->conf.channel->band == IEEE80211_BAND_2GHZ ?
-                        hdr->rate : (hdr->rate - 4)) & 0xf;
+        if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
+                rx_status.rate_idx = (rate < 4) ? 0 : rate - 4;
+        else
+                rx_status.rate_idx = rate;
+
         rx_status.freq = freq;
         rx_status.band =  dev->conf.channel->band;
         rx_status.antenna = hdr->antenna;
@@ -798,6 +813,16 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
                         info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
                 info->status.ack_signal = p54_rssi_to_dbm(dev,
                                 (int)payload->ack_rssi);
+
+                if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) {
+                        u8 *iv = (u8 *)(entry_data->align + pad +
+                                        entry_data->crypt_offset);
+
+                        /* Restore the original TKIP IV. */
+                        iv[2] = iv[0];
+                        iv[0] = iv[1];
+                        iv[1] = (iv[0] | 0x20) & 0x7f;  /* WEPSeed - 8.3.2.2 */
+                }
                 skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
                 ieee80211_tx_status_irqsafe(dev, entry);
                 goto out;
@@ -1383,7 +1408,6 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
         hdr->tries = ridx;
         txhdr->rts_rate_idx = 0;
         if (info->control.hw_key) {
-                crypt_offset += info->control.hw_key->iv_len;
                 txhdr->key_type = p54_convert_algo(info->control.hw_key->alg);
                 txhdr->key_len = min((u8)16, info->control.hw_key->keylen);
                 memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len);
@@ -1397,6 +1421,8 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
                 }
                 /* reserve some space for ICV */
                 len += info->control.hw_key->icv_len;
+                memset(skb_put(skb, info->control.hw_key->icv_len), 0,
+                       info->control.hw_key->icv_len);
         } else {
                 txhdr->key_type = 0;
                 txhdr->key_len = 0;
@@ -1824,7 +1850,7 @@ static void p54_remove_interface(struct ieee80211_hw *dev,
 
 static int p54_config(struct ieee80211_hw *dev, u32 changed)
 {
-        int ret;
+        int ret = 0;
         struct p54_common *priv = dev->priv;
         struct ieee80211_conf *conf = &dev->conf;
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index c44a200059d2..6a6a72f6f82c 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -56,6 +56,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
         {USB_DEVICE(0x050d, 0x7050)},   /* Belkin F5D7050 ver 1000 */
         {USB_DEVICE(0x0572, 0x2000)},   /* Cohiba Proto board */
         {USB_DEVICE(0x0572, 0x2002)},   /* Cohiba Proto board */
+        {USB_DEVICE(0x06b9, 0x0121)},   /* Thomson SpeedTouch 121g */
         {USB_DEVICE(0x0707, 0xee13)},   /* SMC 2862W-G version 2 */
         {USB_DEVICE(0x083a, 0x4521)},   /* Siemens Gigaset USB Adapter 54 version 2 */
         {USB_DEVICE(0x0846, 0x4240)},   /* Netgear WG111 (v2) */
@@ -284,6 +285,7 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb)
         usb_fill_bulk_urb(data_urb, priv->udev,
                           usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
                           skb->data, skb->len, p54u_tx_cb, skb);
+        data_urb->transfer_flags |= URB_ZERO_PACKET;
 
         usb_anchor_urb(data_urb, &priv->submitted);
         if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 30028e2422fc..af6b5847be5c 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -38,7 +38,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 1;
+static int modparam_nohwcrypt = 0;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
@@ -376,11 +376,11 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 
                 /*
                  * The driver does not support the IV/EIV generation
-                 * in hardware. However it doesn't support the IV/EIV
-                 * inside the ieee80211 frame either, but requires it
-                 * to be provided seperately for the descriptor.
-                 * rt2x00lib will cut the IV/EIV data out of all frames
-                 * given to us by mac80211, but we must tell mac80211
+                 * in hardware. However it demands the data to be provided
+                 * both seperately as well as inside the frame.
+                 * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
+                 * to ensure rt2x00lib will not strip the data from the
+                 * frame after the copy, now we must tell mac80211
                  * to generate the IV/EIV data.
                  */
                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
@@ -1181,7 +1181,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
                            test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
-        rt2x00_set_field32(&word, TXD_W0_CIPHER, txdesc->cipher);
+        rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher);
         rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
         rt2x00_desc_write(txd, 0, word);
 }
@@ -1334,14 +1334,7 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
 
                 /* ICV is located at the end of frame */
 
-                /*
-                 * Hardware has stripped IV/EIV data from 802.11 frame during
-                 * decryption. It has provided the data seperately but rt2x00lib
-                 * should decide if it should be reinserted.
-                 */
-                rxdesc->flags |= RX_FLAG_IV_STRIPPED;
-                if (rxdesc->cipher != CIPHER_TKIP)
-                        rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+                rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
                         rxdesc->flags |= RX_FLAG_DECRYPTED;
                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 6d92542fcf0d..87c0f2c83077 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -807,13 +807,11 @@ static void rt2x00lib_rate(struct ieee80211_rate *entry,
 {
         entry->flags = 0;
         entry->bitrate = rate->bitrate;
-        entry->hw_value = rt2x00_create_rate_hw_value(index, 0);
-        entry->hw_value_short = entry->hw_value;
+        entry->hw_value =index;
+        entry->hw_value_short = index;
 
-        if (rate->flags & DEV_RATE_SHORT_PREAMBLE) {
+        if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
                 entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
-                entry->hw_value_short |= rt2x00_create_rate_hw_value(index, 1);
-        }
 }
 
 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c
index 68f4e0fc35b9..a0cd35b6beb5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.c
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
@@ -97,7 +97,7 @@ void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled)
 
 void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled)
 {
-        if (rt2x00dev->led_radio.type == LED_TYPE_ASSOC)
+        if (rt2x00dev->led_radio.type == LED_TYPE_RADIO)
                 rt2x00led_led_simple(&rt2x00dev->led_radio, enabled);
 }
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 03024327767b..86cd26fbf769 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -52,22 +52,11 @@ struct rt2x00_rate {
 
 extern const struct rt2x00_rate rt2x00_supported_rates[12];
 
-static inline u16 rt2x00_create_rate_hw_value(const u16 index,
-                                              const u16 short_preamble)
-{
-        return (short_preamble << 8) | (index & 0xff);
-}
-
 static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
 {
         return &rt2x00_supported_rates[hw_value & 0xff];
 }
 
-static inline int rt2x00_get_rate_preamble(const u16 hw_value)
-{
-        return (hw_value & 0xff00);
-}
-
 /*
  * Radio control handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index eaec6bd93ed5..746a8f36b931 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -313,7 +313,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
                  * When preamble is enabled we should set the
                  * preamble bit for the signal.
                  */
-                if (rt2x00_get_rate_preamble(rate->hw_value))
+                if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
                         txdesc->signal |= 0x08;
         }
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 83df312ac56f..0b29d767a258 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -434,11 +434,11 @@ static int rt2x00usb_find_endpoints(struct rt2x00_dev *rt2x00dev)
 
                 if (usb_endpoint_is_bulk_in(ep_desc)) {
                         rt2x00usb_assign_endpoint(rt2x00dev->rx, ep_desc);
-                } else if (usb_endpoint_is_bulk_out(ep_desc)) {
+                } else if (usb_endpoint_is_bulk_out(ep_desc) &&
+                           (queue != queue_end(rt2x00dev))) {
                         rt2x00usb_assign_endpoint(queue, ep_desc);
+                        queue = queue_next(queue);
 
-                        if (queue != queue_end(rt2x00dev))
-                                queue = queue_next(queue);
                         tx_ep_desc = ep_desc;
                 }
         }
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d638a8a59370..96a8d69f8790 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2321,6 +2321,7 @@ static struct usb_device_id rt73usb_device_table[] = {
         /* Linksys */
         { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
         { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
+        { USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
         /* MSI */
         { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
         { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 5f887fb137a9..387c133ec0f2 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -897,6 +897,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
         dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
                      IEEE80211_HW_RX_INCLUDES_FCS |
                      IEEE80211_HW_SIGNAL_UNSPEC;
+        dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
         dev->queues = 1;
         dev->max_signal = 65;
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 00ce3ef39abe..6ad6bac37706 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -213,7 +213,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
         urb = usb_alloc_urb(0, GFP_ATOMIC);
         if (!urb) {
                 kfree_skb(skb);
-                return -ENOMEM;
+                return NETDEV_TX_OK;
         }
 
         flags = skb->len;
@@ -281,7 +281,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
         }
         usb_free_urb(urb);
 
-        return rc;
+        return NETDEV_TX_OK;
 }
 
 static void rtl8187_rx_cb(struct urb *urb)
@@ -1471,6 +1471,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf)
         ieee80211_unregister_hw(dev);
 
         priv = dev->priv;
+        usb_reset_device(priv->udev);
         usb_put_dev(interface_to_usbdev(intf));
         ieee80211_free_hw(dev);
 }
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index e1b0ad6e918f..fa65a2b2ae2e 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -66,4 +66,23 @@ void of_register_i2c_devices(struct i2c_adapter *adap,
 }
 EXPORT_SYMBOL(of_register_i2c_devices);
 
+static int of_dev_node_match(struct device *dev, void *data)
+{
+        return dev_archdata_get_node(&dev->archdata) == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+        struct device *dev;
+
+        dev = bus_find_device(&i2c_bus_type, NULL, node,
+                                         of_dev_node_match);
+        if (!dev)
+                return NULL;
+
+        return to_i2c_client(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
 MODULE_LICENSE("GPL");
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index f09b1010d477..803d9ddd6e75 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -266,6 +266,8 @@ static int detect_ejectable_slots(struct pci_bus *pbus)
         int found = acpi_pci_detect_ejectable(pbus);
         if (!found) {
                 acpi_handle bridge_handle = acpi_pci_get_bridge_handle(pbus);
+                if (!bridge_handle)
+                        return 0;
                 acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle, (u32)1,
                                     is_pci_dock_device, (void *)&found, NULL);
         }
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index c12f6c790698..e491fdedf705 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1260,15 +1260,14 @@ void pci_pm_init(struct pci_dev *dev)
         /* find PCI PM capability in list */
         pm = pci_find_capability(dev, PCI_CAP_ID_PM);
         if (!pm)
-                goto Exit;
-
+                return;
         /* Check device's ability to generate PME# */
         pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
 
         if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
                 dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
                         pmc & PCI_PM_CAP_VER_MASK);
-                goto Exit;
+                return;
         }
 
         dev->pm_cap = pm;
@@ -1307,9 +1306,6 @@ void pci_pm_init(struct pci_dev *dev)
         } else {
                 dev->pme_support = 0;
         }
-
- Exit:
-        pci_update_current_state(dev, PCI_D0);
 }
 
 /**
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index 645d7a60e412..ec22284eed30 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -14,10 +14,8 @@
 #include <asm/uaccess.h>
 #include "pci.h"
 
-asmlinkage long
-sys_pciconfig_read(unsigned long bus, unsigned long dfn,
-                   unsigned long off, unsigned long len,
-                   void __user *buf)
+SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
+                unsigned long, off, unsigned long, len, void __user *, buf)
 {
         struct pci_dev *dev;
         u8 byte;
@@ -86,10 +84,8 @@ error:
         return err;
 }
 
-asmlinkage long
-sys_pciconfig_write(unsigned long bus, unsigned long dfn,
-                    unsigned long off, unsigned long len,
-                    void __user *buf)
+SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
+                unsigned long, off, unsigned long, len, void __user *, buf)
 {
         struct pci_dev *dev;
         u8 byte;
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index a34284b1482a..d187ba4c5e0e 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -297,7 +297,7 @@ static int __devinit electra_cf_probe(struct of_device *ofdev,
                 goto fail3;
         }
 
-        dev_info(device, "at mem 0x%lx io 0x%lx irq %d\n",
+        dev_info(device, "at mem 0x%lx io 0x%llx irq %d\n",
                  cf->mem_phys, io.start, cf->irq);
 
         cf->active = 1;
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index e65448e99b48..1a266d4ab5f1 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -54,6 +54,18 @@ config ASUS_LAPTOP
 
           If you have an ACPI-compatible ASUS laptop, say Y or M here.
 
+config DELL_LAPTOP
+        tristate "Dell Laptop Extras (EXPERIMENTAL)"
+        depends on X86
+        depends on DCDBAS
+        depends on EXPERIMENTAL
+        depends on BACKLIGHT_CLASS_DEVICE
+        depends on RFKILL
+        default n
+        ---help---
+        This driver adds support for rfkill and backlight control to Dell
+        laptops.
+
 config FUJITSU_LAPTOP
         tristate "Fujitsu Laptop Extras"
         depends on ACPI
@@ -192,6 +204,17 @@ config THINKPAD_ACPI
 
           If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
 
+config THINKPAD_ACPI_DEBUGFACILITIES
+        bool "Maintainer debug facilities"
+        depends on THINKPAD_ACPI
+        default n
+        ---help---
+          Enables extra stuff in the thinkpad-acpi which is completely useless
+          for normal use.  Read the driver source to find out what it does.
+
+          Say N here, unless you were told by a kernel maintainer to do
+          otherwise.
+
 config THINKPAD_ACPI_DEBUG
         bool "Verbose debug mode"
         depends on THINKPAD_ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 1e9de2ae0de5..e29065120be9 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_ASUS_LAPTOP)	+= asus-laptop.o
 obj-$(CONFIG_EEEPC_LAPTOP)      += eeepc-laptop.o
 obj-$(CONFIG_MSI_LAPTOP)        += msi-laptop.o
 obj-$(CONFIG_COMPAL_LAPTOP)     += compal-laptop.o
+obj-$(CONFIG_DELL_LAPTOP)       += dell-laptop.o
 obj-$(CONFIG_ACER_WMI)          += acer-wmi.o
 obj-$(CONFIG_HP_WMI)            += hp-wmi.o
 obj-$(CONFIG_TC1100_WMI)        += tc1100-wmi.o
diff --git a/drivers/misc/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 4d33a2068b7a..16e11c2ee19a 100644
--- a/drivers/misc/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -22,7 +22,7 @@
 #include <linux/rfkill.h>
 #include <linux/power_supply.h>
 #include <linux/acpi.h>
-#include "../firmware/dcdbas.h"
+#include "../../firmware/dcdbas.h"
 
 #define BRIGHTNESS_TOKEN 0x7d
 
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 02fe2b8b8939..9d93cb971e59 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -90,7 +90,7 @@ enum {
 };
 
 static const char *cm_getv[] = {
-        "WLDG", NULL, NULL, NULL,
+        "WLDG", "BTHG", NULL, NULL,
         "CAMG", NULL, NULL, NULL,
         NULL, "PBLG", NULL, NULL,
         "CFVG", NULL, NULL, NULL,
@@ -99,7 +99,7 @@ static const char *cm_getv[] = {
 };
 
 static const char *cm_setv[] = {
-        "WLDS", NULL, NULL, NULL,
+        "WLDS", "BTHS", NULL, NULL,
         "CAMS", NULL, NULL, NULL,
         "SDSP", "PBLS", "HDPS", NULL,
         "CFVS", NULL, NULL, NULL,
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 3478453eba7a..bcbc05107ba8 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -21,7 +21,7 @@
  *  02110-1301, USA.
  */
 
-#define TPACPI_VERSION "0.21"
+#define TPACPI_VERSION "0.22"
 #define TPACPI_SYSFS_VERSION 0x020200
 
 /*
@@ -122,6 +122,27 @@ enum {
 #define TPACPI_HKEY_INPUT_PRODUCT       0x5054 /* "TP" */
 #define TPACPI_HKEY_INPUT_VERSION       0x4101
 
+/* ACPI \WGSV commands */
+enum {
+        TP_ACPI_WGSV_GET_STATE          = 0x01, /* Get state information */
+        TP_ACPI_WGSV_PWR_ON_ON_RESUME   = 0x02, /* Resume WWAN powered on */
+        TP_ACPI_WGSV_PWR_OFF_ON_RESUME  = 0x03, /* Resume WWAN powered off */
+        TP_ACPI_WGSV_SAVE_STATE         = 0x04, /* Save state for S4/S5 */
+};
+
+/* TP_ACPI_WGSV_GET_STATE bits */
+enum {
+        TP_ACPI_WGSV_STATE_WWANEXIST    = 0x0001, /* WWAN hw available */
+        TP_ACPI_WGSV_STATE_WWANPWR      = 0x0002, /* WWAN radio enabled */
+        TP_ACPI_WGSV_STATE_WWANPWRRES   = 0x0004, /* WWAN state at resume */
+        TP_ACPI_WGSV_STATE_WWANBIOSOFF  = 0x0008, /* WWAN disabled in BIOS */
+        TP_ACPI_WGSV_STATE_BLTHEXIST    = 0x0001, /* BLTH hw available */
+        TP_ACPI_WGSV_STATE_BLTHPWR      = 0x0002, /* BLTH radio enabled */
+        TP_ACPI_WGSV_STATE_BLTHPWRRES   = 0x0004, /* BLTH state at resume */
+        TP_ACPI_WGSV_STATE_BLTHBIOSOFF  = 0x0008, /* BLTH disabled in BIOS */
+        TP_ACPI_WGSV_STATE_UWBEXIST     = 0x0010, /* UWB hw available */
+        TP_ACPI_WGSV_STATE_UWBPWR       = 0x0020, /* UWB radio enabled */
+};
 
 /****************************************************************************
  * Main driver
@@ -148,14 +169,17 @@ enum {
 enum {
         TPACPI_RFK_BLUETOOTH_SW_ID = 0,
         TPACPI_RFK_WWAN_SW_ID,
+        TPACPI_RFK_UWB_SW_ID,
 };
 
 /* Debugging */
 #define TPACPI_LOG TPACPI_FILE ": "
-#define TPACPI_ERR         KERN_ERR    TPACPI_LOG
-#define TPACPI_NOTICE KERN_NOTICE TPACPI_LOG
-#define TPACPI_INFO   KERN_INFO   TPACPI_LOG
-#define TPACPI_DEBUG  KERN_DEBUG  TPACPI_LOG
+#define TPACPI_ALERT    KERN_ALERT  TPACPI_LOG
+#define TPACPI_CRIT     KERN_CRIT   TPACPI_LOG
+#define TPACPI_ERR      KERN_ERR    TPACPI_LOG
+#define TPACPI_NOTICE   KERN_NOTICE TPACPI_LOG
+#define TPACPI_INFO     KERN_INFO   TPACPI_LOG
+#define TPACPI_DEBUG    KERN_DEBUG  TPACPI_LOG
 
 #define TPACPI_DBG_ALL          0xffff
 #define TPACPI_DBG_INIT         0x0001
@@ -201,6 +225,7 @@ struct ibm_struct {
         void (*exit) (void);
         void (*resume) (void);
         void (*suspend) (pm_message_t state);
+        void (*shutdown) (void);
 
         struct list_head all_drivers;
 
@@ -239,6 +264,7 @@ static struct {
         u32 bright_16levels:1;
         u32 bright_acpimode:1;
         u32 wan:1;
+        u32 uwb:1;
         u32 fan_ctrl_status_undef:1;
         u32 input_device_registered:1;
         u32 platform_drv_registered:1;
@@ -288,6 +314,18 @@ struct tpacpi_led_classdev {
         unsigned int led;
 };
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+static int dbg_wlswemul;
+static int tpacpi_wlsw_emulstate;
+static int dbg_bluetoothemul;
+static int tpacpi_bluetooth_emulstate;
+static int dbg_wwanemul;
+static int tpacpi_wwan_emulstate;
+static int dbg_uwbemul;
+static int tpacpi_uwb_emulstate;
+#endif
+
+
 /****************************************************************************
  ****************************************************************************
  *
@@ -728,6 +766,18 @@ static int tpacpi_resume_handler(struct platform_device *pdev)
         return 0;
 }
 
+static void tpacpi_shutdown_handler(struct platform_device *pdev)
+{
+        struct ibm_struct *ibm, *itmp;
+
+        list_for_each_entry_safe(ibm, itmp,
+                                 &tpacpi_all_drivers,
+                                 all_drivers) {
+                if (ibm->shutdown)
+                        (ibm->shutdown)();
+        }
+}
+
 static struct platform_driver tpacpi_pdriver = {
         .driver = {
                 .name = TPACPI_DRVR_NAME,
@@ -735,6 +785,7 @@ static struct platform_driver tpacpi_pdriver = {
         },
         .suspend = tpacpi_suspend_handler,
         .resume = tpacpi_resume_handler,
+        .shutdown = tpacpi_shutdown_handler,
 };
 
 static struct platform_driver tpacpi_hwmon_pdriver = {
@@ -922,11 +973,27 @@ static int __init tpacpi_new_rfkill(const unsigned int id,
                         struct rfkill **rfk,
                         const enum rfkill_type rfktype,
                         const char *name,
+                        const bool set_default,
                         int (*toggle_radio)(void *, enum rfkill_state),
                         int (*get_state)(void *, enum rfkill_state *))
 {
         int res;
-        enum rfkill_state initial_state;
+        enum rfkill_state initial_state = RFKILL_STATE_SOFT_BLOCKED;
+
+        res = get_state(NULL, &initial_state);
+        if (res < 0) {
+                printk(TPACPI_ERR
+                        "failed to read initial state for %s, error %d; "
+                        "will turn radio off\n", name, res);
+        } else if (set_default) {
+                /* try to set the initial state as the default for the rfkill
+                 * type, since we ask the firmware to preserve it across S5 in
+                 * NVRAM */
+                rfkill_set_default(rfktype,
+                                (initial_state == RFKILL_STATE_UNBLOCKED) ?
+                                        RFKILL_STATE_UNBLOCKED :
+                                        RFKILL_STATE_SOFT_BLOCKED);
+        }
 
         *rfk = rfkill_allocate(&tpacpi_pdev->dev, rfktype);
         if (!*rfk) {
@@ -938,9 +1005,7 @@ static int __init tpacpi_new_rfkill(const unsigned int id,
         (*rfk)->name = name;
         (*rfk)->get_state = get_state;
         (*rfk)->toggle_radio = toggle_radio;
-
-        if (!get_state(NULL, &initial_state))
-                (*rfk)->state = initial_state;
+        (*rfk)->state = initial_state;
 
         res = rfkill_register(*rfk);
         if (res < 0) {
@@ -1006,6 +1071,119 @@ static DRIVER_ATTR(version, S_IRUGO,
 
 /* --------------------------------------------------------------------- */
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+
+static void tpacpi_send_radiosw_update(void);
+
+/* wlsw_emulstate ------------------------------------------------------ */
+static ssize_t tpacpi_driver_wlsw_emulstate_show(struct device_driver *drv,
+                                                char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_wlsw_emulstate);
+}
+
+static ssize_t tpacpi_driver_wlsw_emulstate_store(struct device_driver *drv,
+                                                const char *buf, size_t count)
+{
+        unsigned long t;
+
+        if (parse_strtoul(buf, 1, &t))
+                return -EINVAL;
+
+        if (tpacpi_wlsw_emulstate != t) {
+                tpacpi_wlsw_emulstate = !!t;
+                tpacpi_send_radiosw_update();
+        } else
+                tpacpi_wlsw_emulstate = !!t;
+
+        return count;
+}
+
+static DRIVER_ATTR(wlsw_emulstate, S_IWUSR | S_IRUGO,
+                tpacpi_driver_wlsw_emulstate_show,
+                tpacpi_driver_wlsw_emulstate_store);
+
+/* bluetooth_emulstate ------------------------------------------------- */
+static ssize_t tpacpi_driver_bluetooth_emulstate_show(
+                                        struct device_driver *drv,
+                                        char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_bluetooth_emulstate);
+}
+
+static ssize_t tpacpi_driver_bluetooth_emulstate_store(
+                                        struct device_driver *drv,
+                                        const char *buf, size_t count)
+{
+        unsigned long t;
+
+        if (parse_strtoul(buf, 1, &t))
+                return -EINVAL;
+
+        tpacpi_bluetooth_emulstate = !!t;
+
+        return count;
+}
+
+static DRIVER_ATTR(bluetooth_emulstate, S_IWUSR | S_IRUGO,
+                tpacpi_driver_bluetooth_emulstate_show,
+                tpacpi_driver_bluetooth_emulstate_store);
+
+/* wwan_emulstate ------------------------------------------------- */
+static ssize_t tpacpi_driver_wwan_emulstate_show(
+                                        struct device_driver *drv,
+                                        char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_wwan_emulstate);
+}
+
+static ssize_t tpacpi_driver_wwan_emulstate_store(
+                                        struct device_driver *drv,
+                                        const char *buf, size_t count)
+{
+        unsigned long t;
+
+        if (parse_strtoul(buf, 1, &t))
+                return -EINVAL;
+
+        tpacpi_wwan_emulstate = !!t;
+
+        return count;
+}
+
+static DRIVER_ATTR(wwan_emulstate, S_IWUSR | S_IRUGO,
+                tpacpi_driver_wwan_emulstate_show,
+                tpacpi_driver_wwan_emulstate_store);
+
+/* uwb_emulstate ------------------------------------------------- */
+static ssize_t tpacpi_driver_uwb_emulstate_show(
+                                        struct device_driver *drv,
+                                        char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_uwb_emulstate);
+}
+
+static ssize_t tpacpi_driver_uwb_emulstate_store(
+                                        struct device_driver *drv,
+                                        const char *buf, size_t count)
+{
+        unsigned long t;
+
+        if (parse_strtoul(buf, 1, &t))
+                return -EINVAL;
+
+        tpacpi_uwb_emulstate = !!t;
+
+        return count;
+}
+
+static DRIVER_ATTR(uwb_emulstate, S_IWUSR | S_IRUGO,
+                tpacpi_driver_uwb_emulstate_show,
+                tpacpi_driver_uwb_emulstate_store);
+#endif
+
+/* --------------------------------------------------------------------- */
+
 static struct driver_attribute *tpacpi_driver_attributes[] = {
         &driver_attr_debug_level, &driver_attr_version,
         &driver_attr_interface_version,
@@ -1022,6 +1200,17 @@ static int __init tpacpi_create_driver_attributes(struct device_driver *drv)
                 i++;
         }
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (!res && dbg_wlswemul)
+                res = driver_create_file(drv, &driver_attr_wlsw_emulstate);
+        if (!res && dbg_bluetoothemul)
+                res = driver_create_file(drv, &driver_attr_bluetooth_emulstate);
+        if (!res && dbg_wwanemul)
+                res = driver_create_file(drv, &driver_attr_wwan_emulstate);
+        if (!res && dbg_uwbemul)
+                res = driver_create_file(drv, &driver_attr_uwb_emulstate);
+#endif
+
         return res;
 }
 
@@ -1031,6 +1220,13 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv)
 
         for (i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++)
                 driver_remove_file(drv, tpacpi_driver_attributes[i]);
+
+#ifdef THINKPAD_ACPI_DEBUGFACILITIES
+        driver_remove_file(drv, &driver_attr_wlsw_emulstate);
+        driver_remove_file(drv, &driver_attr_bluetooth_emulstate);
+        driver_remove_file(drv, &driver_attr_wwan_emulstate);
+        driver_remove_file(drv, &driver_attr_uwb_emulstate);
+#endif
 }
 
 /****************************************************************************
@@ -1216,6 +1412,12 @@ static struct attribute_set *hotkey_dev_attributes;
 
 static int hotkey_get_wlsw(int *status)
 {
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_wlswemul) {
+                *status = !!tpacpi_wlsw_emulstate;
+                return 0;
+        }
+#endif
         if (!acpi_evalf(hkey_handle, status, "WLSW", "d"))
                 return -EIO;
         return 0;
@@ -1678,7 +1880,7 @@ static ssize_t hotkey_mask_show(struct device *dev,
 {
         int res;
 
-        if (mutex_lock_interruptible(&hotkey_mutex))
+        if (mutex_lock_killable(&hotkey_mutex))
                 return -ERESTARTSYS;
         res = hotkey_mask_get();
         mutex_unlock(&hotkey_mutex);
@@ -1697,7 +1899,7 @@ static ssize_t hotkey_mask_store(struct device *dev,
         if (parse_strtoul(buf, 0xffffffffUL, &t))
                 return -EINVAL;
 
-        if (mutex_lock_interruptible(&hotkey_mutex))
+        if (mutex_lock_killable(&hotkey_mutex))
                 return -ERESTARTSYS;
 
         res = hotkey_mask_set(t);
@@ -1783,7 +1985,7 @@ static ssize_t hotkey_source_mask_store(struct device *dev,
                 ((t & ~TPACPI_HKEY_NVRAM_KNOWN_MASK) != 0))
                 return -EINVAL;
 
-        if (mutex_lock_interruptible(&hotkey_mutex))
+        if (mutex_lock_killable(&hotkey_mutex))
                 return -ERESTARTSYS;
 
         HOTKEY_CONFIG_CRITICAL_START
@@ -1818,7 +2020,7 @@ static ssize_t hotkey_poll_freq_store(struct device *dev,
         if (parse_strtoul(buf, 25, &t))
                 return -EINVAL;
 
-        if (mutex_lock_interruptible(&hotkey_mutex))
+        if (mutex_lock_killable(&hotkey_mutex))
                 return -ERESTARTSYS;
 
         hotkey_poll_freq = t;
@@ -1958,6 +2160,7 @@ static struct attribute *hotkey_mask_attributes[] __initdata = {
 
 static void bluetooth_update_rfk(void);
 static void wan_update_rfk(void);
+static void uwb_update_rfk(void);
 static void tpacpi_send_radiosw_update(void)
 {
         int wlsw;
@@ -1967,6 +2170,8 @@ static void tpacpi_send_radiosw_update(void)
                 bluetooth_update_rfk();
         if (tp_features.wan)
                 wan_update_rfk();
+        if (tp_features.uwb)
+                uwb_update_rfk();
 
         if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) {
                 mutex_lock(&tpacpi_inputdev_send_mutex);
@@ -2222,6 +2427,13 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
                     hotkey_source_mask, hotkey_poll_freq);
 #endif
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_wlswemul) {
+                tp_features.hotkey_wlsw = 1;
+                printk(TPACPI_INFO
+                        "radio switch emulation enabled\n");
+        } else
+#endif
         /* Not all thinkpads have a hardware radio switch */
         if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
                 tp_features.hotkey_wlsw = 1;
@@ -2361,13 +2573,154 @@ err_exit:
         return (res < 0)? res : 1;
 }
 
+static bool hotkey_notify_hotkey(const u32 hkey,
+                                 bool *send_acpi_ev,
+                                 bool *ignore_acpi_ev)
+{
+        /* 0x1000-0x1FFF: key presses */
+        unsigned int scancode = hkey & 0xfff;
+        *send_acpi_ev = true;
+        *ignore_acpi_ev = false;
+
+        if (scancode > 0 && scancode < 0x21) {
+                scancode--;
+                if (!(hotkey_source_mask & (1 << scancode))) {
+                        tpacpi_input_send_key(scancode);
+                        *send_acpi_ev = false;
+                } else {
+                        *ignore_acpi_ev = true;
+                }
+                return true;
+        }
+        return false;
+}
+
+static bool hotkey_notify_wakeup(const u32 hkey,
+                                 bool *send_acpi_ev,
+                                 bool *ignore_acpi_ev)
+{
+        /* 0x2000-0x2FFF: Wakeup reason */
+        *send_acpi_ev = true;
+        *ignore_acpi_ev = false;
+
+        switch (hkey) {
+        case 0x2304: /* suspend, undock */
+        case 0x2404: /* hibernation, undock */
+                hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
+                *ignore_acpi_ev = true;
+                break;
+
+        case 0x2305: /* suspend, bay eject */
+        case 0x2405: /* hibernation, bay eject */
+                hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
+                *ignore_acpi_ev = true;
+                break;
+
+        case 0x2313: /* Battery on critical low level (S3) */
+        case 0x2413: /* Battery on critical low level (S4) */
+                printk(TPACPI_ALERT
+                        "EMERGENCY WAKEUP: battery almost empty\n");
+                /* how to auto-heal: */
+                /* 2313: woke up from S3, go to S4/S5 */
+                /* 2413: woke up from S4, go to S5 */
+                break;
+
+        default:
+                return false;
+        }
+
+        if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) {
+                printk(TPACPI_INFO
+                       "woke up due to a hot-unplug "
+                       "request...\n");
+                hotkey_wakeup_reason_notify_change();
+        }
+        return true;
+}
+
+static bool hotkey_notify_usrevent(const u32 hkey,
+                                 bool *send_acpi_ev,
+                                 bool *ignore_acpi_ev)
+{
+        /* 0x5000-0x5FFF: human interface helpers */
+        *send_acpi_ev = true;
+        *ignore_acpi_ev = false;
+
+        switch (hkey) {
+        case 0x5010: /* Lenovo new BIOS: brightness changed */
+        case 0x500b: /* X61t: tablet pen inserted into bay */
+        case 0x500c: /* X61t: tablet pen removed from bay */
+                return true;
+
+        case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
+        case 0x500a: /* X41t-X61t: swivel down (normal mode) */
+                tpacpi_input_send_tabletsw();
+                hotkey_tablet_mode_notify_change();
+                *send_acpi_ev = false;
+                return true;
+
+        case 0x5001:
+        case 0x5002:
+                /* LID switch events.  Do not propagate */
+                *ignore_acpi_ev = true;
+                return true;
+
+        default:
+                return false;
+        }
+}
+
+static bool hotkey_notify_thermal(const u32 hkey,
+                                 bool *send_acpi_ev,
+                                 bool *ignore_acpi_ev)
+{
+        /* 0x6000-0x6FFF: thermal alarms */
+        *send_acpi_ev = true;
+        *ignore_acpi_ev = false;
+
+        switch (hkey) {
+        case 0x6011:
+                printk(TPACPI_CRIT
+                        "THERMAL ALARM: battery is too hot!\n");
+                /* recommended action: warn user through gui */
+                return true;
+        case 0x6012:
+                printk(TPACPI_ALERT
+                        "THERMAL EMERGENCY: battery is extremely hot!\n");
+                /* recommended action: immediate sleep/hibernate */
+                return true;
+        case 0x6021:
+                printk(TPACPI_CRIT
+                        "THERMAL ALARM: "
+                        "a sensor reports something is too hot!\n");
+                /* recommended action: warn user through gui, that */
+                /* some internal component is too hot */
+                return true;
+        case 0x6022:
+                printk(TPACPI_ALERT
+                        "THERMAL EMERGENCY: "
+                        "a sensor reports something is extremely hot!\n");
+                /* recommended action: immediate sleep/hibernate */
+                return true;
+        case 0x6030:
+                printk(TPACPI_INFO
+                        "EC reports that Thermal Table has changed\n");
+                /* recommended action: do nothing, we don't have
+                 * Lenovo ATM information */
+                return true;
+        default:
+                printk(TPACPI_ALERT
+                         "THERMAL ALERT: unknown thermal alarm received\n");
+                return false;
+        }
+}
+
 static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 {
         u32 hkey;
-        unsigned int scancode;
-        int send_acpi_ev;
-        int ignore_acpi_ev;
-        int unk_ev;
+        bool send_acpi_ev;
+        bool ignore_acpi_ev;
+        bool known_ev;
 
         if (event != 0x80) {
                 printk(TPACPI_ERR
@@ -2375,7 +2728,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
                 /* forward it to userspace, maybe it knows how to handle it */
                 acpi_bus_generate_netlink_event(
                                         ibm->acpi->device->pnp.device_class,
-                                        ibm->acpi->device->dev.bus_id,
+                                        dev_name(&ibm->acpi->device->dev),
                                         event, 0);
                 return;
         }
@@ -2391,107 +2744,72 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
                         return;
                 }
 
-                send_acpi_ev = 1;
-                ignore_acpi_ev = 0;
-                unk_ev = 0;
+                send_acpi_ev = true;
+                ignore_acpi_ev = false;
 
                 switch (hkey >> 12) {
                 case 1:
                         /* 0x1000-0x1FFF: key presses */
-                        scancode = hkey & 0xfff;
-                        if (scancode > 0 && scancode < 0x21) {
-                                scancode--;
-                                if (!(hotkey_source_mask & (1 << scancode))) {
-                                        tpacpi_input_send_key(scancode);
-                                        send_acpi_ev = 0;
-                                } else {
-                                        ignore_acpi_ev = 1;
-                                }
-                        } else {
-                                unk_ev = 1;
-                        }
+                        known_ev = hotkey_notify_hotkey(hkey, &send_acpi_ev,
+                                                 &ignore_acpi_ev);
                         break;
                 case 2:
-                        /* Wakeup reason */
-                        switch (hkey) {
-                        case 0x2304: /* suspend, undock */
-                        case 0x2404: /* hibernation, undock */
-                                hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
-                                ignore_acpi_ev = 1;
-                                break;
-                        case 0x2305: /* suspend, bay eject */
-                        case 0x2405: /* hibernation, bay eject */
-                                hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
-                                ignore_acpi_ev = 1;
-                                break;
-                        default:
-                                unk_ev = 1;
-                        }
-                        if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) {
-                                printk(TPACPI_INFO
-                                       "woke up due to a hot-unplug "
-                                       "request...\n");
-                                hotkey_wakeup_reason_notify_change();
-                        }
+                        /* 0x2000-0x2FFF: Wakeup reason */
+                        known_ev = hotkey_notify_wakeup(hkey, &send_acpi_ev,
+                                                 &ignore_acpi_ev);
                         break;
                 case 3:
-                        /* bay-related wakeups */
+                        /* 0x3000-0x3FFF: bay-related wakeups */
                         if (hkey == 0x3003) {
                                 hotkey_autosleep_ack = 1;
                                 printk(TPACPI_INFO
                                        "bay ejected\n");
                                 hotkey_wakeup_hotunplug_complete_notify_change();
+                                known_ev = true;
                         } else {
-                                unk_ev = 1;
+                                known_ev = false;
                         }
                         break;
                 case 4:
-                        /* dock-related wakeups */
+                        /* 0x4000-0x4FFF: dock-related wakeups */
                         if (hkey == 0x4003) {
                                 hotkey_autosleep_ack = 1;
                                 printk(TPACPI_INFO
                                        "undocked\n");
                                 hotkey_wakeup_hotunplug_complete_notify_change();
+                                known_ev = true;
                         } else {
-                                unk_ev = 1;
+                                known_ev = false;
                         }
                         break;
                 case 5:
                         /* 0x5000-0x5FFF: human interface helpers */
-                        switch (hkey) {
-                        case 0x5010: /* Lenovo new BIOS: brightness changed */
-                        case 0x500b: /* X61t: tablet pen inserted into bay */
-                        case 0x500c: /* X61t: tablet pen removed from bay */
-                                break;
-                        case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
-                        case 0x500a: /* X41t-X61t: swivel down (normal mode) */
-                                tpacpi_input_send_tabletsw();
-                                hotkey_tablet_mode_notify_change();
-                                send_acpi_ev = 0;
-                                break;
-                        case 0x5001:
-                        case 0x5002:
-                                /* LID switch events.  Do not propagate */
-                                ignore_acpi_ev = 1;
-                                break;
-                        default:
-                                unk_ev = 1;
-                        }
+                        known_ev = hotkey_notify_usrevent(hkey, &send_acpi_ev,
+                                                 &ignore_acpi_ev);
+                        break;
+                case 6:
+                        /* 0x6000-0x6FFF: thermal alarms */
+                        known_ev = hotkey_notify_thermal(hkey, &send_acpi_ev,
+                                                 &ignore_acpi_ev);
                         break;
                 case 7:
                         /* 0x7000-0x7FFF: misc */
                         if (tp_features.hotkey_wlsw && hkey == 0x7000) {
                                 tpacpi_send_radiosw_update();
                                 send_acpi_ev = 0;
+                                known_ev = true;
                                 break;
                         }
                         /* fallthrough to default */
                 default:
-                        unk_ev = 1;
+                        known_ev = false;
                 }
-                if (unk_ev) {
+                if (!known_ev) {
                         printk(TPACPI_NOTICE
                                "unhandled HKEY event 0x%04x\n", hkey);
+                        printk(TPACPI_NOTICE
+                               "please report the conditions when this "
+                               "event happened to %s\n", TPACPI_MAIL);
                 }
 
                 /* Legacy events */
@@ -2505,7 +2823,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
                 if (!ignore_acpi_ev && send_acpi_ev) {
                         acpi_bus_generate_netlink_event(
                                         ibm->acpi->device->pnp.device_class,
-                                        ibm->acpi->device->dev.bus_id,
+                                        dev_name(&ibm->acpi->device->dev),
                                         event, hkey);
                 }
         }
@@ -2544,7 +2862,7 @@ static int hotkey_read(char *p)
                 return len;
         }
 
-        if (mutex_lock_interruptible(&hotkey_mutex))
+        if (mutex_lock_killable(&hotkey_mutex))
                 return -ERESTARTSYS;
         res = hotkey_status_get(&status);
         if (!res)
@@ -2575,7 +2893,7 @@ static int hotkey_write(char *buf)
         if (!tp_features.hotkey)
                 return -ENODEV;
 
-        if (mutex_lock_interruptible(&hotkey_mutex))
+        if (mutex_lock_killable(&hotkey_mutex))
                 return -ERESTARTSYS;
 
         status = -1;
@@ -2640,11 +2958,28 @@ enum {
         /* ACPI GBDC/SBDC bits */
         TP_ACPI_BLUETOOTH_HWPRESENT     = 0x01, /* Bluetooth hw available */
         TP_ACPI_BLUETOOTH_RADIOSSW      = 0x02, /* Bluetooth radio enabled */
-        TP_ACPI_BLUETOOTH_UNK           = 0x04, /* unknown function */
+        TP_ACPI_BLUETOOTH_RESUMECTRL    = 0x04, /* Bluetooth state at resume:
+                                                   off / last state */
+};
+
+enum {
+        /* ACPI \BLTH commands */
+        TP_ACPI_BLTH_GET_ULTRAPORT_ID   = 0x00, /* Get Ultraport BT ID */
+        TP_ACPI_BLTH_GET_PWR_ON_RESUME  = 0x01, /* Get power-on-resume state */
+        TP_ACPI_BLTH_PWR_ON_ON_RESUME   = 0x02, /* Resume powered on */
+        TP_ACPI_BLTH_PWR_OFF_ON_RESUME  = 0x03, /* Resume powered off */
+        TP_ACPI_BLTH_SAVE_STATE         = 0x05, /* Save state for S4/S5 */
 };
 
 static struct rfkill *tpacpi_bluetooth_rfkill;
 
+static void bluetooth_suspend(pm_message_t state)
+{
+        /* Try to make sure radio will resume powered off */
+        acpi_evalf(NULL, NULL, "\\BLTH", "vd",
+                   TP_ACPI_BLTH_PWR_OFF_ON_RESUME);
+}
+
 static int bluetooth_get_radiosw(void)
 {
         int status;
@@ -2656,6 +2991,12 @@ static int bluetooth_get_radiosw(void)
         if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
                 return RFKILL_STATE_HARD_BLOCKED;
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_bluetoothemul)
+                return (tpacpi_bluetooth_emulstate) ?
+                        RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+#endif
+
         if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
                 return -EIO;
 
@@ -2689,12 +3030,20 @@ static int bluetooth_set_radiosw(int radio_on, int update_rfk)
             && radio_on)
                 return -EPERM;
 
-        if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
-                return -EIO;
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_bluetoothemul) {
+                tpacpi_bluetooth_emulstate = !!radio_on;
+                if (update_rfk)
+                        bluetooth_update_rfk();
+                return 0;
+        }
+#endif
+
+        /* We make sure to keep TP_ACPI_BLUETOOTH_RESUMECTRL off */
         if (radio_on)
-                status |= TP_ACPI_BLUETOOTH_RADIOSSW;
+                status = TP_ACPI_BLUETOOTH_RADIOSSW;
         else
-                status &= ~TP_ACPI_BLUETOOTH_RADIOSSW;
+                status = 0;
         if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
                 return -EIO;
 
@@ -2765,8 +3114,19 @@ static int tpacpi_bluetooth_rfk_set(void *data, enum rfkill_state state)
         return bluetooth_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
 }
 
+static void bluetooth_shutdown(void)
+{
+        /* Order firmware to save current state to NVRAM */
+        if (!acpi_evalf(NULL, NULL, "\\BLTH", "vd",
+                        TP_ACPI_BLTH_SAVE_STATE))
+                printk(TPACPI_NOTICE
+                        "failed to save bluetooth state to NVRAM\n");
+}
+
 static void bluetooth_exit(void)
 {
+        bluetooth_shutdown();
+
         if (tpacpi_bluetooth_rfkill)
                 rfkill_unregister(tpacpi_bluetooth_rfkill);
 
@@ -2792,6 +3152,13 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
                 str_supported(tp_features.bluetooth),
                 status);
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_bluetoothemul) {
+                tp_features.bluetooth = 1;
+                printk(TPACPI_INFO
+                        "bluetooth switch emulation enabled\n");
+        } else
+#endif
         if (tp_features.bluetooth &&
             !(status & TP_ACPI_BLUETOOTH_HWPRESENT)) {
                 /* no bluetooth hardware present in system */
@@ -2812,6 +3179,7 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
                                 &tpacpi_bluetooth_rfkill,
                                 RFKILL_TYPE_BLUETOOTH,
                                 "tpacpi_bluetooth_sw",
+                                true,
                                 tpacpi_bluetooth_rfk_set,
                                 tpacpi_bluetooth_rfk_get);
         if (res) {
@@ -2864,6 +3232,8 @@ static struct ibm_struct bluetooth_driver_data = {
         .read = bluetooth_read,
         .write = bluetooth_write,
         .exit = bluetooth_exit,
+        .suspend = bluetooth_suspend,
+        .shutdown = bluetooth_shutdown,
 };
 
 /*************************************************************************
@@ -2874,11 +3244,19 @@ enum {
         /* ACPI GWAN/SWAN bits */
         TP_ACPI_WANCARD_HWPRESENT       = 0x01, /* Wan hw available */
         TP_ACPI_WANCARD_RADIOSSW        = 0x02, /* Wan radio enabled */
-        TP_ACPI_WANCARD_UNK             = 0x04, /* unknown function */
+        TP_ACPI_WANCARD_RESUMECTRL      = 0x04, /* Wan state at resume:
+                                                   off / last state */
 };
 
 static struct rfkill *tpacpi_wan_rfkill;
 
+static void wan_suspend(pm_message_t state)
+{
+        /* Try to make sure radio will resume powered off */
+        acpi_evalf(NULL, NULL, "\\WGSV", "qvd",
+                   TP_ACPI_WGSV_PWR_OFF_ON_RESUME);
+}
+
 static int wan_get_radiosw(void)
 {
         int status;
@@ -2890,6 +3268,12 @@ static int wan_get_radiosw(void)
         if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
                 return RFKILL_STATE_HARD_BLOCKED;
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_wwanemul)
+                return (tpacpi_wwan_emulstate) ?
+                        RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+#endif
+
         if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
                 return -EIO;
 
@@ -2923,12 +3307,20 @@ static int wan_set_radiosw(int radio_on, int update_rfk)
             && radio_on)
                 return -EPERM;
 
-        if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
-                return -EIO;
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_wwanemul) {
+                tpacpi_wwan_emulstate = !!radio_on;
+                if (update_rfk)
+                        wan_update_rfk();
+                return 0;
+        }
+#endif
+
+        /* We make sure to keep TP_ACPI_WANCARD_RESUMECTRL off */
         if (radio_on)
-                status |= TP_ACPI_WANCARD_RADIOSSW;
+                status = TP_ACPI_WANCARD_RADIOSSW;
         else
-                status &= ~TP_ACPI_WANCARD_RADIOSSW;
+                status = 0;
         if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
                 return -EIO;
 
@@ -2999,8 +3391,19 @@ static int tpacpi_wan_rfk_set(void *data, enum rfkill_state state)
         return wan_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
 }
 
+static void wan_shutdown(void)
+{
+        /* Order firmware to save current state to NVRAM */
+        if (!acpi_evalf(NULL, NULL, "\\WGSV", "vd",
+                        TP_ACPI_WGSV_SAVE_STATE))
+                printk(TPACPI_NOTICE
+                        "failed to save WWAN state to NVRAM\n");
+}
+
 static void wan_exit(void)
 {
+        wan_shutdown();
+
         if (tpacpi_wan_rfkill)
                 rfkill_unregister(tpacpi_wan_rfkill);
 
@@ -3024,6 +3427,13 @@ static int __init wan_init(struct ibm_init_struct *iibm)
                 str_supported(tp_features.wan),
                 status);
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_wwanemul) {
+                tp_features.wan = 1;
+                printk(TPACPI_INFO
+                        "wwan switch emulation enabled\n");
+        } else
+#endif
         if (tp_features.wan &&
             !(status & TP_ACPI_WANCARD_HWPRESENT)) {
                 /* no wan hardware present in system */
@@ -3044,6 +3454,7 @@ static int __init wan_init(struct ibm_init_struct *iibm)
                                 &tpacpi_wan_rfkill,
                                 RFKILL_TYPE_WWAN,
                                 "tpacpi_wwan_sw",
+                                true,
                                 tpacpi_wan_rfk_set,
                                 tpacpi_wan_rfk_get);
         if (res) {
@@ -3096,6 +3507,164 @@ static struct ibm_struct wan_driver_data = {
         .read = wan_read,
         .write = wan_write,
         .exit = wan_exit,
+        .suspend = wan_suspend,
+        .shutdown = wan_shutdown,
+};
+
+/*************************************************************************
+ * UWB subdriver
+ */
+
+enum {
+        /* ACPI GUWB/SUWB bits */
+        TP_ACPI_UWB_HWPRESENT   = 0x01, /* UWB hw available */
+        TP_ACPI_UWB_RADIOSSW    = 0x02, /* UWB radio enabled */
+};
+
+static struct rfkill *tpacpi_uwb_rfkill;
+
+static int uwb_get_radiosw(void)
+{
+        int status;
+
+        if (!tp_features.uwb)
+                return -ENODEV;
+
+        /* WLSW overrides UWB in firmware/hardware, reflect that */
+        if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
+                return RFKILL_STATE_HARD_BLOCKED;
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_uwbemul)
+                return (tpacpi_uwb_emulstate) ?
+                        RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+#endif
+
+        if (!acpi_evalf(hkey_handle, &status, "GUWB", "d"))
+                return -EIO;
+
+        return ((status & TP_ACPI_UWB_RADIOSSW) != 0) ?
+                RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+}
+
+static void uwb_update_rfk(void)
+{
+        int status;
+
+        if (!tpacpi_uwb_rfkill)
+                return;
+
+        status = uwb_get_radiosw();
+        if (status < 0)
+                return;
+        rfkill_force_state(tpacpi_uwb_rfkill, status);
+}
+
+static int uwb_set_radiosw(int radio_on, int update_rfk)
+{
+        int status;
+
+        if (!tp_features.uwb)
+                return -ENODEV;
+
+        /* WLSW overrides UWB in firmware/hardware, but there is no
+         * reason to risk weird behaviour. */
+        if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
+            && radio_on)
+                return -EPERM;
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_uwbemul) {
+                tpacpi_uwb_emulstate = !!radio_on;
+                if (update_rfk)
+                        uwb_update_rfk();
+                return 0;
+        }
+#endif
+
+        status = (radio_on) ? TP_ACPI_UWB_RADIOSSW : 0;
+        if (!acpi_evalf(hkey_handle, NULL, "SUWB", "vd", status))
+                return -EIO;
+
+        if (update_rfk)
+                uwb_update_rfk();
+
+        return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int tpacpi_uwb_rfk_get(void *data, enum rfkill_state *state)
+{
+        int uwbs = uwb_get_radiosw();
+
+        if (uwbs < 0)
+                return uwbs;
+
+        *state = uwbs;
+        return 0;
+}
+
+static int tpacpi_uwb_rfk_set(void *data, enum rfkill_state state)
+{
+        return uwb_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
+}
+
+static void uwb_exit(void)
+{
+        if (tpacpi_uwb_rfkill)
+                rfkill_unregister(tpacpi_uwb_rfkill);
+}
+
+static int __init uwb_init(struct ibm_init_struct *iibm)
+{
+        int res;
+        int status = 0;
+
+        vdbg_printk(TPACPI_DBG_INIT, "initializing uwb subdriver\n");
+
+        TPACPI_ACPIHANDLE_INIT(hkey);
+
+        tp_features.uwb = hkey_handle &&
+            acpi_evalf(hkey_handle, &status, "GUWB", "qd");
+
+        vdbg_printk(TPACPI_DBG_INIT, "uwb is %s, status 0x%02x\n",
+                str_supported(tp_features.uwb),
+                status);
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+        if (dbg_uwbemul) {
+                tp_features.uwb = 1;
+                printk(TPACPI_INFO
+                        "uwb switch emulation enabled\n");
+        } else
+#endif
+        if (tp_features.uwb &&
+            !(status & TP_ACPI_UWB_HWPRESENT)) {
+                /* no uwb hardware present in system */
+                tp_features.uwb = 0;
+                dbg_printk(TPACPI_DBG_INIT,
+                           "uwb hardware not installed\n");
+        }
+
+        if (!tp_features.uwb)
+                return 1;
+
+        res = tpacpi_new_rfkill(TPACPI_RFK_UWB_SW_ID,
+                                &tpacpi_uwb_rfkill,
+                                RFKILL_TYPE_UWB,
+                                "tpacpi_uwb_sw",
+                                false,
+                                tpacpi_uwb_rfk_set,
+                                tpacpi_uwb_rfk_get);
+
+        return res;
+}
+
+static struct ibm_struct uwb_driver_data = {
+        .name = "uwb",
+        .exit = uwb_exit,
+        .flags.experimental = 1,
 };
 
 /*************************************************************************
@@ -3724,7 +4293,7 @@ static void dock_notify(struct ibm_struct *ibm, u32 event)
         }
         acpi_bus_generate_proc_event(ibm->acpi->device, event, data);
         acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
-                                          ibm->acpi->device->dev.bus_id,
+                                          dev_name(&ibm->acpi->device->dev),
                                           event, data);
 }
 
@@ -3826,7 +4395,7 @@ static void bay_notify(struct ibm_struct *ibm, u32 event)
 {
         acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
         acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
-                                          ibm->acpi->device->dev.bus_id,
+                                          dev_name(&ibm->acpi->device->dev),
                                           event, 0);
 }
 
@@ -4850,7 +5419,7 @@ static int brightness_set(int value)
             value < 0)
                 return -EINVAL;
 
-        res = mutex_lock_interruptible(&brightness_mutex);
+        res = mutex_lock_killable(&brightness_mutex);
         if (res < 0)
                 return res;
 
@@ -5334,6 +5903,60 @@ TPACPI_HANDLE(sfan, ec, "SFAN",	/* 570 */
            );                   /* all others */
 
 /*
+ * Unitialized HFSP quirk: ACPI DSDT and EC fail to initialize the
+ * HFSP register at boot, so it contains 0x07 but the Thinkpad could
+ * be in auto mode (0x80).
+ *
+ * This is corrected by any write to HFSP either by the driver, or
+ * by the firmware.
+ *
+ * We assume 0x07 really means auto mode while this quirk is active,
+ * as this is far more likely than the ThinkPad being in level 7,
+ * which is only used by the firmware during thermal emergencies.
+ */
+
+static void fan_quirk1_detect(void)
+{
+        /* In some ThinkPads, neither the EC nor the ACPI
+         * DSDT initialize the HFSP register, and it ends up
+         * being initially set to 0x07 when it *could* be
+         * either 0x07 or 0x80.
+         *
+         * Enable for TP-1Y (T43), TP-78 (R51e),
+         * TP-76 (R52), TP-70 (T43, R52), which are known
+         * to be buggy. */
+        if (fan_control_initial_status == 0x07) {
+                switch (thinkpad_id.ec_model) {
+                case 0x5931: /* TP-1Y */
+                case 0x3837: /* TP-78 */
+                case 0x3637: /* TP-76 */
+                case 0x3037: /* TP-70 */
+                        printk(TPACPI_NOTICE
+                               "fan_init: initial fan status is unknown, "
+                               "assuming it is in auto mode\n");
+                        tp_features.fan_ctrl_status_undef = 1;
+                        ;;
+                }
+        }
+}
+
+static void fan_quirk1_handle(u8 *fan_status)
+{
+        if (unlikely(tp_features.fan_ctrl_status_undef)) {
+                if (*fan_status != fan_control_initial_status) {
+                        /* something changed the HFSP regisnter since
+                         * driver init time, so it is not undefined
+                         * anymore */
+                        tp_features.fan_ctrl_status_undef = 0;
+                } else {
+                        /* Return most likely status. In fact, it
+                         * might be the only possible status */
+                        *fan_status = TP_EC_FAN_AUTO;
+                }
+        }
+}
+
+/*
  * Call with fan_mutex held
  */
 static void fan_update_desired_level(u8 status)
@@ -5371,8 +5994,10 @@ static int fan_get_status(u8 *status)
                 if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
                         return -EIO;
 
-                if (likely(status))
+                if (likely(status)) {
                         *status = s;
+                        fan_quirk1_handle(status);
+                }
 
                 break;
 
@@ -5388,7 +6013,7 @@ static int fan_get_status_safe(u8 *status)
         int rc;
         u8 s;
 
-        if (mutex_lock_interruptible(&fan_mutex))
+        if (mutex_lock_killable(&fan_mutex))
                 return -ERESTARTSYS;
         rc = fan_get_status(&s);
         if (!rc)
@@ -5471,7 +6096,7 @@ static int fan_set_level_safe(int level)
         if (!fan_control_allowed)
                 return -EPERM;
 
-        if (mutex_lock_interruptible(&fan_mutex))
+        if (mutex_lock_killable(&fan_mutex))
                 return -ERESTARTSYS;
 
         if (level == TPACPI_FAN_LAST_LEVEL)
@@ -5493,7 +6118,7 @@ static int fan_set_enable(void)
         if (!fan_control_allowed)
                 return -EPERM;
 
-        if (mutex_lock_interruptible(&fan_mutex))
+        if (mutex_lock_killable(&fan_mutex))
                 return -ERESTARTSYS;
 
         switch (fan_control_access_mode) {
@@ -5548,7 +6173,7 @@ static int fan_set_disable(void)
         if (!fan_control_allowed)
                 return -EPERM;
 
-        if (mutex_lock_interruptible(&fan_mutex))
+        if (mutex_lock_killable(&fan_mutex))
                 return -ERESTARTSYS;
 
         rc = 0;
@@ -5586,7 +6211,7 @@ static int fan_set_speed(int speed)
         if (!fan_control_allowed)
                 return -EPERM;
 
-        if (mutex_lock_interruptible(&fan_mutex))
+        if (mutex_lock_killable(&fan_mutex))
                 return -ERESTARTSYS;
 
         rc = 0;
@@ -5682,16 +6307,6 @@ static ssize_t fan_pwm1_enable_show(struct device *dev,
         if (res)
                 return res;
 
-        if (unlikely(tp_features.fan_ctrl_status_undef)) {
-                if (status != fan_control_initial_status) {
-                        tp_features.fan_ctrl_status_undef = 0;
-                } else {
-                        /* Return most likely status. In fact, it
-                         * might be the only possible status */
-                        status = TP_EC_FAN_AUTO;
-                }
-        }
-
         if (status & TP_EC_FAN_FULLSPEED) {
                 mode = 0;
         } else if (status & TP_EC_FAN_AUTO) {
@@ -5756,14 +6371,6 @@ static ssize_t fan_pwm1_show(struct device *dev,
         if (res)
                 return res;
 
-        if (unlikely(tp_features.fan_ctrl_status_undef)) {
-                if (status != fan_control_initial_status) {
-                        tp_features.fan_ctrl_status_undef = 0;
-                } else {
-                        status = TP_EC_FAN_AUTO;
-                }
-        }
-
         if ((status &
              (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) != 0)
                 status = fan_control_desired_level;
@@ -5788,7 +6395,7 @@ static ssize_t fan_pwm1_store(struct device *dev,
         /* scale down from 0-255 to 0-7 */
         newlevel = (s >> 5) & 0x07;
 
-        if (mutex_lock_interruptible(&fan_mutex))
+        if (mutex_lock_killable(&fan_mutex))
                 return -ERESTARTSYS;
 
         rc = fan_get_status(&status);
@@ -5895,29 +6502,7 @@ static int __init fan_init(struct ibm_init_struct *iibm)
                 if (likely(acpi_ec_read(fan_status_offset,
                                         &fan_control_initial_status))) {
                         fan_status_access_mode = TPACPI_FAN_RD_TPEC;
-
-                        /* In some ThinkPads, neither the EC nor the ACPI
-                         * DSDT initialize the fan status, and it ends up
-                         * being set to 0x07 when it *could* be either
-                         * 0x07 or 0x80.
-                         *
-                         * Enable for TP-1Y (T43), TP-78 (R51e),
-                         * TP-76 (R52), TP-70 (T43, R52), which are known
-                         * to be buggy. */
-                        if (fan_control_initial_status == 0x07) {
-                                switch (thinkpad_id.ec_model) {
-                                case 0x5931: /* TP-1Y */
-                                case 0x3837: /* TP-78 */
-                                case 0x3637: /* TP-76 */
-                                case 0x3037: /* TP-70 */
-                                        printk(TPACPI_NOTICE
-                                               "fan_init: initial fan status "
-                                               "is unknown, assuming it is "
-                                               "in auto mode\n");
-                                        tp_features.fan_ctrl_status_undef = 1;
-                                        ;;
-                                }
-                        }
+                        fan_quirk1_detect();
                 } else {
                         printk(TPACPI_ERR
                                "ThinkPad ACPI EC access misbehaving, "
@@ -6106,15 +6691,6 @@ static int fan_read(char *p)
                 if (rc < 0)
                         return rc;
 
-                if (unlikely(tp_features.fan_ctrl_status_undef)) {
-                        if (status != fan_control_initial_status)
-                                tp_features.fan_ctrl_status_undef = 0;
-                        else
-                                /* Return most likely status. In fact, it
-                                 * might be the only possible status */
-                                status = TP_EC_FAN_AUTO;
-                }
-
                 len += sprintf(p + len, "status:\t\t%s\n",
                                (status != 0) ? "enabled" : "disabled");
 
@@ -6563,6 +7139,10 @@ static struct ibm_init_struct ibms_init[] __initdata = {
                 .init = wan_init,
                 .data = &wan_driver_data,
         },
+        {
+                .init = uwb_init,
+                .data = &uwb_driver_data,
+        },
 #ifdef CONFIG_THINKPAD_ACPI_VIDEO
         {
                 .init = video_init,
@@ -6701,6 +7281,32 @@ TPACPI_PARAM(brightness);
 TPACPI_PARAM(volume);
 TPACPI_PARAM(fan);
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+module_param(dbg_wlswemul, uint, 0);
+MODULE_PARM_DESC(dbg_wlswemul, "Enables WLSW emulation");
+module_param_named(wlsw_state, tpacpi_wlsw_emulstate, bool, 0);
+MODULE_PARM_DESC(wlsw_state,
+                 "Initial state of the emulated WLSW switch");
+
+module_param(dbg_bluetoothemul, uint, 0);
+MODULE_PARM_DESC(dbg_bluetoothemul, "Enables bluetooth switch emulation");
+module_param_named(bluetooth_state, tpacpi_bluetooth_emulstate, bool, 0);
+MODULE_PARM_DESC(bluetooth_state,
+                 "Initial state of the emulated bluetooth switch");
+
+module_param(dbg_wwanemul, uint, 0);
+MODULE_PARM_DESC(dbg_wwanemul, "Enables WWAN switch emulation");
+module_param_named(wwan_state, tpacpi_wwan_emulstate, bool, 0);
+MODULE_PARM_DESC(wwan_state,
+                 "Initial state of the emulated WWAN switch");
+
+module_param(dbg_uwbemul, uint, 0);
+MODULE_PARM_DESC(dbg_uwbemul, "Enables UWB switch emulation");
+module_param_named(uwb_state, tpacpi_uwb_emulstate, bool, 0);
+MODULE_PARM_DESC(uwb_state,
+                 "Initial state of the emulated UWB switch");
+#endif
+
 static void thinkpad_acpi_module_exit(void)
 {
         struct ibm_struct *ibm, *itmp;
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index 204158cf7a55..fe96793e3f08 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -732,7 +732,7 @@ static u64 pm_signal_group_to_ps3_lv1_signal_group(u64 group)
         case 8:
                 return pm_translate_signal_group_number_on_island8(subgroup);
         default:
-                dev_dbg(sbd_core(), "%s:%u: island not found: %lu\n", __func__,
+                dev_dbg(sbd_core(), "%s:%u: island not found: %llu\n", __func__,
                         __LINE__, group);
                 BUG();
                 break;
@@ -765,7 +765,7 @@ static int __ps3_set_signal(u64 lv1_signal_group, u64 bus_select,
                                  signal_select, attr1, attr2, attr3);
         if (ret)
                 dev_err(sbd_core(),
-                        "%s:%u: error:%d 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n",
+                        "%s:%u: error:%d 0x%llx 0x%llx 0x%llx 0x%llx 0x%llx 0x%llx\n",
                         __func__, __LINE__, ret, lv1_signal_group, bus_select,
                         signal_select, attr1, attr2, attr3);
 
@@ -908,7 +908,7 @@ void ps3_disable_pm(u32 cpu)
 
         lpm_priv->tb_count = tmp;
 
-        dev_dbg(sbd_core(), "%s:%u: tb_count %lu (%lxh)\n", __func__, __LINE__,
+        dev_dbg(sbd_core(), "%s:%u: tb_count %llu (%llxh)\n", __func__, __LINE__,
                 lpm_priv->tb_count, lpm_priv->tb_count);
 }
 EXPORT_SYMBOL_GPL(ps3_disable_pm);
@@ -938,7 +938,7 @@ int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count,
         if (offset >= lpm_priv->tb_count)
                 return 0;
 
-        count = min(count, lpm_priv->tb_count - offset);
+        count = min_t(u64, count, lpm_priv->tb_count - offset);
 
         while (*bytes_copied < count) {
                 const unsigned long request = count - *bytes_copied;
@@ -993,7 +993,7 @@ int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf,
         if (offset >= lpm_priv->tb_count)
                 return 0;
 
-        count = min(count, lpm_priv->tb_count - offset);
+        count = min_t(u64, count, lpm_priv->tb_count - offset);
 
         while (*bytes_copied < count) {
                 const unsigned long request = count - *bytes_copied;
@@ -1013,7 +1013,7 @@ int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf,
                 result = copy_to_user(buf, lpm_priv->tb_cache, tmp);
 
                 if (result) {
-                        dev_dbg(sbd_core(), "%s:%u: 0x%lx bytes at 0x%p\n",
+                        dev_dbg(sbd_core(), "%s:%u: 0x%llx bytes at 0x%p\n",
                                 __func__, __LINE__, tmp, buf);
                         dev_err(sbd_core(), "%s:%u: copy_to_user failed: %d\n",
                                 __func__, __LINE__, result);
@@ -1148,8 +1148,8 @@ int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache,
         lpm_priv->shadow.group_control = PS3_LPM_SHADOW_REG_INIT;
         lpm_priv->shadow.debug_bus_control = PS3_LPM_SHADOW_REG_INIT;
 
-        dev_dbg(sbd_core(), "%s:%u: lpm_id 0x%lx, outlet_id 0x%lx, "
-                "tb_size 0x%lx\n", __func__, __LINE__, lpm_priv->lpm_id,
+        dev_dbg(sbd_core(), "%s:%u: lpm_id 0x%llx, outlet_id 0x%llx, "
+                "tb_size 0x%llx\n", __func__, __LINE__, lpm_priv->lpm_id,
                 lpm_priv->outlet_id, tb_size);
 
         return 0;
diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c
index 90c097a7a47a..e4ad5ba5d0a3 100644
--- a/drivers/ps3/ps3-vuart.c
+++ b/drivers/ps3/ps3-vuart.c
@@ -114,7 +114,7 @@ struct ports_bmp {
 static void __maybe_unused _dump_ports_bmp(
         const struct ports_bmp *bmp, const char *func, int line)
 {
-        pr_debug("%s:%d: ports_bmp: %016lxh\n", func, line, bmp->status);
+        pr_debug("%s:%d: ports_bmp: %016llxh\n", func, line, bmp->status);
 }
 
 #define dump_port_params(_b) _dump_port_params(_b, __func__, __LINE__)
@@ -159,11 +159,13 @@ int ps3_vuart_get_triggers(struct ps3_system_bus_device *dev,
         struct vuart_triggers *trig)
 {
         int result;
-        unsigned long size;
-        unsigned long val;
+        u64 size;
+        u64 val;
+        u64 tx;
 
         result = lv1_get_virtual_uart_param(dev->port_number,
-                PARAM_TX_TRIGGER, &trig->tx);
+                PARAM_TX_TRIGGER, &tx);
+        trig->tx = tx;
 
         if (result) {
                 dev_dbg(&dev->core, "%s:%d: tx_trigger failed: %s\n",
@@ -201,7 +203,7 @@ int ps3_vuart_set_triggers(struct ps3_system_bus_device *dev, unsigned int tx,
         unsigned int rx)
 {
         int result;
-        unsigned long size;
+        u64 size;
 
         result = lv1_set_virtual_uart_param(dev->port_number,
                 PARAM_TX_TRIGGER, tx);
@@ -248,7 +250,7 @@ static int ps3_vuart_get_rx_bytes_waiting(struct ps3_system_bus_device *dev,
                 dev_dbg(&dev->core, "%s:%d: rx_bytes failed: %s\n",
                         __func__, __LINE__, ps3_result(result));
 
-        dev_dbg(&dev->core, "%s:%d: %lxh\n", __func__, __LINE__,
+        dev_dbg(&dev->core, "%s:%d: %llxh\n", __func__, __LINE__,
                 *bytes_waiting);
         return result;
 }
@@ -295,7 +297,7 @@ static int ps3_vuart_get_interrupt_status(struct ps3_system_bus_device *dev,
 
         *status = tmp & priv->interrupt_mask;
 
-        dev_dbg(&dev->core, "%s:%d: m %lxh, s %lxh, m&s %lxh\n",
+        dev_dbg(&dev->core, "%s:%d: m %llxh, s %llxh, m&s %lxh\n",
                 __func__, __LINE__, priv->interrupt_mask, tmp, *status);
 
         return result;
@@ -363,7 +365,7 @@ int ps3_vuart_disable_interrupt_disconnect(struct ps3_system_bus_device *dev)
  */
 
 static int ps3_vuart_raw_write(struct ps3_system_bus_device *dev,
-        const void *buf, unsigned int bytes, unsigned long *bytes_written)
+        const void *buf, unsigned int bytes, u64 *bytes_written)
 {
         int result;
         struct ps3_vuart_port_priv *priv = to_port_priv(dev);
@@ -379,7 +381,7 @@ static int ps3_vuart_raw_write(struct ps3_system_bus_device *dev,
 
         priv->stats.bytes_written += *bytes_written;
 
-        dev_dbg(&dev->core, "%s:%d: wrote %lxh/%xh=>%lxh\n", __func__, __LINE__,
+        dev_dbg(&dev->core, "%s:%d: wrote %llxh/%xh=>%lxh\n", __func__, __LINE__,
                 *bytes_written, bytes, priv->stats.bytes_written);
 
         return result;
@@ -393,7 +395,7 @@ static int ps3_vuart_raw_write(struct ps3_system_bus_device *dev,
  */
 
 static int ps3_vuart_raw_read(struct ps3_system_bus_device *dev, void *buf,
-        unsigned int bytes, unsigned long *bytes_read)
+        unsigned int bytes, u64 *bytes_read)
 {
         int result;
         struct ps3_vuart_port_priv *priv = to_port_priv(dev);
@@ -411,7 +413,7 @@ static int ps3_vuart_raw_read(struct ps3_system_bus_device *dev, void *buf,
 
         priv->stats.bytes_read += *bytes_read;
 
-        dev_dbg(&dev->core, "%s:%d: read %lxh/%xh=>%lxh\n", __func__, __LINE__,
+        dev_dbg(&dev->core, "%s:%d: read %llxh/%xh=>%lxh\n", __func__, __LINE__,
                 *bytes_read, bytes, priv->stats.bytes_read);
 
         return result;
@@ -500,7 +502,7 @@ int ps3_vuart_write(struct ps3_system_bus_device *dev, const void *buf,
         spin_lock_irqsave(&priv->tx_list.lock, flags);
 
         if (list_empty(&priv->tx_list.head)) {
-                unsigned long bytes_written;
+                u64 bytes_written;
 
                 result = ps3_vuart_raw_write(dev, buf, bytes, &bytes_written);
 
@@ -592,7 +594,7 @@ static int ps3_vuart_queue_rx_bytes(struct ps3_system_bus_device *dev,
         list_add_tail(&lb->link, &priv->rx_list.head);
         priv->rx_list.bytes_held += bytes;
 
-        dev_dbg(&dev->core, "%s:%d: buf_%lu: queued %lxh bytes\n",
+        dev_dbg(&dev->core, "%s:%d: buf_%lu: queued %llxh bytes\n",
                 __func__, __LINE__, lb->dbg_number, bytes);
 
         *bytes_queued = bytes;
@@ -745,7 +747,7 @@ static int ps3_vuart_handle_interrupt_tx(struct ps3_system_bus_device *dev)
 
         list_for_each_entry_safe(lb, n, &priv->tx_list.head, link) {
 
-                unsigned long bytes_written;
+                u64 bytes_written;
 
                 result = ps3_vuart_raw_write(dev, lb->head, lb->tail - lb->head,
                         &bytes_written);
@@ -762,7 +764,7 @@ static int ps3_vuart_handle_interrupt_tx(struct ps3_system_bus_device *dev)
                 if (bytes_written < lb->tail - lb->head) {
                         lb->head += bytes_written;
                         dev_dbg(&dev->core,
-                                "%s:%d cleared buf_%lu, %lxh bytes\n",
+                                "%s:%d cleared buf_%lu, %llxh bytes\n",
                                 __func__, __LINE__, lb->dbg_number,
                                 bytes_written);
                         goto port_full;
diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c
index 55955f16ad91..18066d555397 100644
--- a/drivers/ps3/ps3stor_lib.c
+++ b/drivers/ps3/ps3stor_lib.c
@@ -70,7 +70,7 @@ static int ps3stor_probe_access(struct ps3_storage_device *dev)
                          __func__, __LINE__, n);
         dev->region_idx = __ffs(dev->accessible_regions);
         dev_info(&dev->sbd.core,
-                 "First accessible region has index %u start %lu size %lu\n",
+                 "First accessible region has index %u start %llu size %llu\n",
                  dev->region_idx, dev->regions[dev->region_idx].start,
                  dev->regions[dev->region_idx].size);
 
@@ -220,7 +220,7 @@ u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar,
         const char *op = write ? "write" : "read";
         int res;
 
-        dev_dbg(&dev->sbd.core, "%s:%u: %s %lu sectors starting at %lu\n",
+        dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
                 __func__, __LINE__, op, sectors, start_sector);
 
         init_completion(&dev->done);
@@ -238,7 +238,7 @@ u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar,
 
         wait_for_completion(&dev->done);
         if (dev->lv1_status) {
-                dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%lx\n", __func__,
+                dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
                         __LINE__, op, dev->lv1_status);
                 return dev->lv1_status;
         }
@@ -268,7 +268,7 @@ u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd, u64 arg1,
 {
         int res;
 
-        dev_dbg(&dev->sbd.core, "%s:%u: send device command 0x%lx\n", __func__,
+        dev_dbg(&dev->sbd.core, "%s:%u: send device command 0x%llx\n", __func__,
                 __LINE__, cmd);
 
         init_completion(&dev->done);
@@ -277,19 +277,19 @@ u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd, u64 arg1,
                                               arg2, arg3, arg4, &dev->tag);
         if (res) {
                 dev_err(&dev->sbd.core,
-                        "%s:%u: send_device_command 0x%lx failed %d\n",
+                        "%s:%u: send_device_command 0x%llx failed %d\n",
                         __func__, __LINE__, cmd, res);
                 return -1;
         }
 
         wait_for_completion(&dev->done);
         if (dev->lv1_status) {
-                dev_dbg(&dev->sbd.core, "%s:%u: command 0x%lx failed 0x%lx\n",
+                dev_dbg(&dev->sbd.core, "%s:%u: command 0x%llx failed 0x%llx\n",
                         __func__, __LINE__, cmd, dev->lv1_status);
                 return dev->lv1_status;
         }
 
-        dev_dbg(&dev->sbd.core, "%s:%u: command 0x%lx completed\n", __func__,
+        dev_dbg(&dev->sbd.core, "%s:%u: command 0x%llx completed\n", __func__,
                 __LINE__, cmd);
 
         return 0;
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index cc7eb8767b82..bd56a033bfd0 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -27,6 +27,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
+#include <mach/hardware.h>
+
 #define TIMER_FREQ              CLOCK_TICK_RATE
 #define RTC_DEF_DIVIDER         (32768 - 1)
 #define RTC_DEF_TRIM            0
diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
index 8ce5f74ee45b..ad35f76c46b7 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -120,7 +120,7 @@ static int twl4030_rtc_write_u8(u8 data, u8 reg)
 static unsigned char rtc_irq_bits;
 
 /*
- * Enable timer and/or alarm interrupts.
+ * Enable 1/second update and/or alarm interrupts.
  */
 static int set_rtc_irq_bit(unsigned char bit)
 {
@@ -128,6 +128,7 @@ static int set_rtc_irq_bit(unsigned char bit)
         int ret;
 
         val = rtc_irq_bits | bit;
+        val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
         ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
         if (ret == 0)
                 rtc_irq_bits = val;
@@ -136,7 +137,7 @@ static int set_rtc_irq_bit(unsigned char bit)
 }
 
 /*
- * Disable timer and/or alarm interrupts.
+ * Disable update and/or alarm interrupts.
  */
 static int mask_rtc_irq_bit(unsigned char bit)
 {
@@ -151,7 +152,7 @@ static int mask_rtc_irq_bit(unsigned char bit)
         return ret;
 }
 
-static inline int twl4030_rtc_alarm_irq_set_state(int enabled)
+static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
 {
         int ret;
 
@@ -163,7 +164,7 @@ static inline int twl4030_rtc_alarm_irq_set_state(int enabled)
         return ret;
 }
 
-static inline int twl4030_rtc_irq_set_state(int enabled)
+static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
 {
         int ret;
 
@@ -292,7 +293,7 @@ static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
         unsigned char alarm_data[ALL_TIME_REGS + 1];
         int ret;
 
-        ret = twl4030_rtc_alarm_irq_set_state(0);
+        ret = twl4030_rtc_alarm_irq_enable(dev, 0);
         if (ret)
                 goto out;
 
@@ -312,35 +313,11 @@ static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
         }
 
         if (alm->enabled)
-                ret = twl4030_rtc_alarm_irq_set_state(1);
+                ret = twl4030_rtc_alarm_irq_enable(dev, 1);
 out:
         return ret;
 }
 
-#ifdef  CONFIG_RTC_INTF_DEV
-
-static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd,
-                             unsigned long arg)
-{
-        switch (cmd) {
-        case RTC_AIE_OFF:
-                return twl4030_rtc_alarm_irq_set_state(0);
-        case RTC_AIE_ON:
-                return twl4030_rtc_alarm_irq_set_state(1);
-        case RTC_UIE_OFF:
-                return twl4030_rtc_irq_set_state(0);
-        case RTC_UIE_ON:
-                return twl4030_rtc_irq_set_state(1);
-
-        default:
-                return -ENOIOCTLCMD;
-        }
-}
-
-#else
-#define twl4030_rtc_ioctl       NULL
-#endif
-
 static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
 {
         unsigned long events = 0;
@@ -400,11 +377,12 @@ out:
 }
 
 static struct rtc_class_ops twl4030_rtc_ops = {
-        .ioctl          = twl4030_rtc_ioctl,
         .read_time      = twl4030_rtc_read_time,
         .set_time       = twl4030_rtc_set_time,
         .read_alarm     = twl4030_rtc_read_alarm,
         .set_alarm      = twl4030_rtc_set_alarm,
+        .alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
+        .update_irq_enable = twl4030_rtc_update_irq_enable,
 };
 
 /*----------------------------------------------------------------------*/
@@ -422,7 +400,7 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
         rtc = rtc_device_register(pdev->name,
                                   &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
         if (IS_ERR(rtc)) {
-                ret = -EINVAL;
+                ret = PTR_ERR(rtc);
                 dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
                         PTR_ERR(rtc));
                 goto out0;
@@ -432,7 +410,6 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
         platform_set_drvdata(pdev, rtc);
 
         ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
-
         if (ret < 0)
                 goto out1;
 
@@ -475,7 +452,6 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
 
         return ret;
 
-
 out2:
         free_irq(irq, rtc);
 out1:
@@ -506,8 +482,9 @@ static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
 
 static void twl4030_rtc_shutdown(struct platform_device *pdev)
 {
-        mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
-                         BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+        /* mask timer interrupts, but leave alarm interrupts on to enable
+           power-on when alarm is triggered */
+        mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ee0739b217b6..91ef669d98f6 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -933,7 +933,7 @@ static void ibmvfc_get_host_speed(struct Scsi_Host *shost)
                         fc_host_speed(shost) = FC_PORTSPEED_16GBIT;
                         break;
                 default:
-                        ibmvfc_log(vhost, 3, "Unknown port speed: %ld Gbit\n",
+                        ibmvfc_log(vhost, 3, "Unknown port speed: %lld Gbit\n",
                                    vhost->login_buf->resp.link_speed / 100);
                         fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
                         break;
@@ -2149,8 +2149,8 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 {
         const char *desc = ibmvfc_get_ae_desc(crq->event);
 
-        ibmvfc_log(vhost, 3, "%s event received. scsi_id: %lx, wwpn: %lx,"
-                   " node_name: %lx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
+        ibmvfc_log(vhost, 3, "%s event received. scsi_id: %llx, wwpn: %llx,"
+                   " node_name: %llx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
 
         switch (crq->event) {
         case IBMVFC_AE_LINK_UP:
@@ -2184,7 +2184,7 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
                 ibmvfc_link_down(vhost, IBMVFC_HALTED);
                 break;
         default:
-                dev_err(vhost->dev, "Unknown async event received: %ld\n", crq->event);
+                dev_err(vhost->dev, "Unknown async event received: %lld\n", crq->event);
                 break;
         };
 }
@@ -2261,13 +2261,13 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)
          * actually sent
          */
         if (unlikely(!ibmvfc_valid_event(&vhost->pool, evt))) {
-                dev_err(vhost->dev, "Returned correlation_token 0x%08lx is invalid!\n",
+                dev_err(vhost->dev, "Returned correlation_token 0x%08llx is invalid!\n",
                         crq->ioba);
                 return;
         }
 
         if (unlikely(atomic_read(&evt->free))) {
-                dev_err(vhost->dev, "Received duplicate correlation_token 0x%08lx!\n",
+                dev_err(vhost->dev, "Received duplicate correlation_token 0x%08llx!\n",
                         crq->ioba);
                 return;
         }
@@ -3259,7 +3259,7 @@ static int ibmvfc_alloc_target(struct ibmvfc_host *vhost, u64 scsi_id)
 
         tgt = mempool_alloc(vhost->tgt_pool, GFP_KERNEL);
         if (!tgt) {
-                dev_err(vhost->dev, "Target allocation failure for scsi id %08lx\n",
+                dev_err(vhost->dev, "Target allocation failure for scsi id %08llx\n",
                         scsi_id);
                 return -ENOMEM;
         }
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index babdf3db59df..87dafd0f8d44 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -691,13 +691,13 @@ struct ibmvfc_host {
 #define DBG_CMD(CMD) do { if (ibmvfc_debug) CMD; } while (0)
 
 #define tgt_dbg(t, fmt, ...)                    \
-        DBG_CMD(dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__))
+        DBG_CMD(dev_info((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__))
 
 #define tgt_info(t, fmt, ...)           \
-        dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
+        dev_info((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
 
 #define tgt_err(t, fmt, ...)            \
-        dev_err((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
+        dev_err((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
 
 #define ibmvfc_dbg(vhost, ...) \
         DBG_CMD(dev_info((vhost)->dev, ##__VA_ARGS__))
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 5c541f7850f9..74d07d137dae 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1061,7 +1061,7 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
         }
 
         sdev_printk(KERN_INFO, cmd->device,
-                    "aborting command. lun 0x%lx, tag 0x%lx\n",
+                    "aborting command. lun 0x%llx, tag 0x%llx\n",
                     (((u64) lun) << 48), (u64) found_evt);
 
         wait_for_completion(&evt->comp);
@@ -1082,7 +1082,7 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
         if (rsp_rc) {
                 if (printk_ratelimit())
                         sdev_printk(KERN_WARNING, cmd->device,
-                                    "abort code %d for task tag 0x%lx\n",
+                                    "abort code %d for task tag 0x%llx\n",
                                     rsp_rc, tsk_mgmt->task_tag);
                 return FAILED;
         }
@@ -1102,12 +1102,12 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
 
         if (found_evt == NULL) {
                 spin_unlock_irqrestore(hostdata->host->host_lock, flags);
-                sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%lx completed\n",
+                sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%llx completed\n",
                             tsk_mgmt->task_tag);
                 return SUCCESS;
         }
 
-        sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%lx\n",
+        sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%llx\n",
                     tsk_mgmt->task_tag);
 
         cmd->result = (DID_ABORT << 16);
@@ -1182,7 +1182,7 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd)
                 return FAILED;
         }
 
-        sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%lx\n",
+        sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%llx\n",
                     (((u64) lun) << 48));
 
         wait_for_completion(&evt->comp);
@@ -1203,7 +1203,7 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd)
         if (rsp_rc) {
                 if (printk_ratelimit())
                         sdev_printk(KERN_WARNING, cmd->device,
-                                    "reset code %d for task tag 0x%lx\n",
+                                    "reset code %d for task tag 0x%llx\n",
                                     rsp_rc, tsk_mgmt->task_tag);
                 return FAILED;
         }
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 841f460edbc4..07829009a8be 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4912,7 +4912,7 @@ static int ipr_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
         if (res && ipr_is_gata(res)) {
                 if (cmd == HDIO_GET_IDENTITY)
                         return -ENOTTY;
-                return ata_scsi_ioctl(sdev, cmd, arg);
+                return ata_sas_scsi_ioctl(res->sata_port->ap, sdev, cmd, arg);
         }
 
         return -EINVAL;
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index a745f91d2928..e7705d3532c9 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -177,7 +177,6 @@ int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn,
                            struct iscsi_segment *segment, int recv,
                            unsigned copied)
 {
-        static unsigned char padbuf[ISCSI_PAD_LEN];
         struct scatterlist sg;
         unsigned int pad;
 
@@ -233,7 +232,7 @@ int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn,
                         debug_tcp("consume %d pad bytes\n", pad);
                         segment->total_size += pad;
                         segment->size = pad;
-                        segment->data = padbuf;
+                        segment->data = segment->padbuf;
                         return 0;
                 }
         }
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 744838780ada..1c558d3bce18 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -717,7 +717,7 @@ int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
         struct domain_device *dev = sdev_to_domain_dev(sdev);
 
         if (dev_is_sata(dev))
-                return ata_scsi_ioctl(sdev, cmd, arg);
+                return ata_sas_scsi_ioctl(dev->sata_dev.ap, sdev, cmd, arg);
 
         return -EINVAL;
 }
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index ce48e2d0193c..ca0dd33497ec 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -290,11 +290,11 @@ static irqreturn_t ps3rom_interrupt(int irq, void *data)
 
         if (tag != dev->tag)
                 dev_err(&dev->sbd.core,
-                        "%s:%u: tag mismatch, got %lx, expected %lx\n",
+                        "%s:%u: tag mismatch, got %llx, expected %llx\n",
                         __func__, __LINE__, tag, dev->tag);
 
         if (res) {
-                dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%lx\n",
+                dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
                         __func__, __LINE__, res, status);
                 return IRQ_HANDLED;
         }
@@ -364,7 +364,7 @@ static int __devinit ps3rom_probe(struct ps3_system_bus_device *_dev)
 
         if (dev->blk_size != CD_FRAMESIZE) {
                 dev_err(&dev->sbd.core,
-                        "%s:%u: cannot handle block size %lu\n", __func__,
+                        "%s:%u: cannot handle block size %llu\n", __func__,
                         __LINE__, dev->blk_size);
                 return -EINVAL;
         }
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2d4f32b4df5c..9ad4d0968e5c 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1258,35 +1258,48 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 {
         int     rval;
         unsigned long flags = 0;
-        int cnt;
+        int cnt, que;
         struct qla_hw_data *ha = vha->hw;
-        struct req_que *req = ha->req_q_map[0];
-        struct rsp_que *rsp = ha->rsp_q_map[0];
+        struct req_que *req;
+        struct rsp_que *rsp;
+        struct scsi_qla_host *vp;
         struct mid_init_cb_24xx *mid_init_cb =
             (struct mid_init_cb_24xx *) ha->init_cb;
 
         spin_lock_irqsave(&ha->hardware_lock, flags);
 
         /* Clear outstanding commands array. */
-        for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
-                req->outstanding_cmds[cnt] = NULL;
+        for (que = 0; que < ha->max_queues; que++) {
+                req = ha->req_q_map[que];
+                if (!req)
+                        continue;
+                for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+                        req->outstanding_cmds[cnt] = NULL;
 
-        req->current_outstanding_cmd = 0;
+                req->current_outstanding_cmd = 0;
 
-        /* Clear RSCN queue. */
-        vha->rscn_in_ptr = 0;
-        vha->rscn_out_ptr = 0;
+                /* Initialize firmware. */
+                req->ring_ptr  = req->ring;
+                req->ring_index    = 0;
+                req->cnt      = req->length;
+        }
 
-        /* Initialize firmware. */
-        req->ring_ptr  = req->ring;
-        req->ring_index    = 0;
-        req->cnt      = req->length;
-        rsp->ring_ptr = rsp->ring;
-        rsp->ring_index    = 0;
+        for (que = 0; que < ha->max_queues; que++) {
+                rsp = ha->rsp_q_map[que];
+                if (!rsp)
+                        continue;
+                rsp->ring_ptr = rsp->ring;
+                rsp->ring_index    = 0;
 
-        /* Initialize response queue entries */
-        qla2x00_init_response_q_entries(rsp);
+                /* Initialize response queue entries */
+                qla2x00_init_response_q_entries(rsp);
+        }
 
+        /* Clear RSCN queue. */
+        list_for_each_entry(vp, &ha->vp_list, list) {
+                vp->rscn_in_ptr = 0;
+                vp->rscn_out_ptr = 0;
+        }
         ha->isp_ops->config_rings(vha);
 
         spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -3212,8 +3225,8 @@ qla2x00_loop_resync(scsi_qla_host_t *vha)
         int rval = QLA_SUCCESS;
         uint32_t wait_time;
         struct qla_hw_data *ha = vha->hw;
-        struct req_que *req = ha->req_q_map[0];
-        struct rsp_que *rsp = ha->rsp_q_map[0];
+        struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+        struct rsp_que *rsp = req->rsp;
 
         atomic_set(&vha->loop_state, LOOP_UPDATE);
         clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
@@ -3492,6 +3505,7 @@ qla25xx_init_queues(struct qla_hw_data *ha)
                 }
                 req = ha->req_q_map[i];
                 if (req) {
+                /* Clear outstanding commands array. */
                         req->options &= ~BIT_0;
                         ret = qla25xx_init_req_que(base_vha, req, req->options);
                         if (ret != QLA_SUCCESS)
@@ -3500,7 +3514,7 @@ qla25xx_init_queues(struct qla_hw_data *ha)
                                                 req->id));
                         else
                                 DEBUG2_17(printk(KERN_WARNING
-                                        "%s Rsp que:%d inited\n", __func__,
+                                        "%s Req que:%d inited\n", __func__,
                                                 req->id));
                 }
         }
@@ -4151,8 +4165,8 @@ qla24xx_configure_vhba(scsi_qla_host_t *vha)
         uint16_t mb[MAILBOX_REGISTER_COUNT];
         struct qla_hw_data *ha = vha->hw;
         struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
-        struct req_que *req = ha->req_q_map[0];
-        struct rsp_que *rsp = ha->rsp_q_map[0];
+        struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+        struct rsp_que *rsp = req->rsp;
 
         if (!vha->vp_idx)
                 return -EINVAL;
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 886323130fcc..f53179c46423 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -629,6 +629,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
         req->ring_index = 0;
         req->cnt = req->length;
         req->id = que_id;
+        req->max_q_depth = ha->req_q_map[0]->max_q_depth;
         mutex_unlock(&ha->vport_lock);
 
         ret = qla25xx_init_req_que(base_vha, req, options);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4a71f522f925..cf32653fe01a 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1158,8 +1158,8 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
         struct req_que *req;
 
         spin_lock_irqsave(&ha->hardware_lock, flags);
-        for (que = 0; que < QLA_MAX_HOST_QUES; que++) {
-                req = ha->req_q_map[vha->req_ques[que]];
+        for (que = 0; que < ha->max_queues; que++) {
+                req = ha->req_q_map[que];
                 if (!req)
                         continue;
                 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
@@ -1193,7 +1193,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
         scsi_qla_host_t *vha = shost_priv(sdev->host);
         struct qla_hw_data *ha = vha->hw;
         struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
-        struct req_que *req = ha->req_q_map[0];
+        struct req_que *req = ha->req_q_map[vha->req_ques[0]];
 
         if (sdev->tagged_supported)
                 scsi_activate_tcq(sdev, req->max_q_depth);
@@ -1998,7 +1998,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
         return 0;
 
 probe_failed:
-        qla2x00_free_que(ha, req, rsp);
         qla2x00_free_device(base_vha);
 
         scsi_host_put(base_vha->host);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 42e72a2c1f98..cbcd3f681b62 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1095,7 +1095,8 @@ EXPORT_SYMBOL(__starget_for_each_device);
  * Description: Looks up the scsi_device with the specified @lun for a given
  * @starget.  The returned scsi_device does not have an additional
  * reference.  You must hold the host's host_lock over this call and
- * any access to the returned scsi_device.
+ * any access to the returned scsi_device. A scsi_device in state
+ * SDEV_DEL is skipped.
  *
  * Note:  The only reason why drivers should use this is because
  * they need to access the device list in irq context.  Otherwise you
@@ -1107,6 +1108,8 @@ struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget,
         struct scsi_device *sdev;
 
         list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
+                if (sdev->sdev_state == SDEV_DEL)
+                        continue;
                 if (sdev->lun ==lun)
                         return sdev;
         }
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 4969e4ec75ea..099b5455bbce 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -224,6 +224,7 @@ static struct {
         {"SGI", "TP9100", "*", BLIST_REPORTLUN2},
         {"SGI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
         {"IBM", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
+        {"SUN", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
         {"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36},
         {"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN},
         {"SONY", "TSL", NULL, BLIST_FORCELUN},          /* DDS3 & DDS4 autoloaders */
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index c088146b7513..2a3671233b15 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -602,6 +602,10 @@ static int pci_netmos_init(struct pci_dev *dev)
         /* subdevice 0x00PS means <P> parallel, <S> serial */
         unsigned int num_serial = dev->subsystem_device & 0xf;
 
+        if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+                        dev->subsystem_device == 0x0299)
+                return 0;
+
         if (num_serial == 0)
                 return -ENODEV;
         return num_serial;
@@ -3096,6 +3100,10 @@ static struct pci_device_id serial_pci_tbl[] = {
                 0,
                 pbn_b0_8_115200 },
 
+        {       PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+                PCI_VENDOR_ID_IBM, 0x0299,
+                0, 0, pbn_b0_bt_2_115200 },
+
         /*
          * These entries match devices with class COMMUNICATION_SERIAL,
          * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index fde7f9ccf57e..bbcfc26a3b6d 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -270,6 +270,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
         {       "RSS0250",              0       },
         /* SupraExpress 28.8 Data/Fax PnP modem */
         {       "SUP1310",              0       },
+        /* SupraExpress 336i PnP Voice Modem */
+        {       "SUP1381",              0       },
         /* SupraExpress 33.6 Data/Fax PnP modem */
         {       "SUP1421",              0       },
         /* SupraExpress 33.6 Data/Fax PnP modem */
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index d5efd6c77904..89362d733d62 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -579,7 +579,7 @@ static void atmel_tx_dma(struct uart_port *port)
         /* disable PDC transmit */
         UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
 
-        if (!uart_circ_empty(xmit)) {
+        if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
                 dma_sync_single_for_device(port->dev,
                                            pdc->dma_addr,
                                            pdc->dma_size,
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index a821e3a3d664..14f8fa9135be 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -163,6 +163,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = {
         { .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
         { .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
         { .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
+        { .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
         { .type = "serial", .compatible = "ibm,qpace-nwp-serial",
                                         .data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 22e30d21225e..1bb8f1b45767 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -187,7 +187,7 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
         status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
                  ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
         while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
-                ch = serial_in(sport, PNX8XXX_FIFO);
+                ch = serial_in(sport, PNX8XXX_FIFO) & 0xff;
 
                 sport->port.icount.rx++;
 
@@ -198,9 +198,16 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
                  * out of the main execution path
                  */
                 if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
-                                        PNX8XXX_UART_FIFO_RXPAR) |
+                                        PNX8XXX_UART_FIFO_RXPAR |
+                                        PNX8XXX_UART_FIFO_RXBRK) |
                               ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
-                        if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
+                        if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) {
+                                status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
+                                        FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR));
+                                sport->port.icount.brk++;
+                                if (uart_handle_break(&sport->port))
+                                        goto ignore_char;
+                        } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
                                 sport->port.icount.parity++;
                         else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
                                 sport->port.icount.frame++;
@@ -284,14 +291,8 @@ static irqreturn_t pnx8xxx_int(int irq, void *dev_id)
         /* Get the interrupts */
         status  = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
 
-        /* Break signal received */
-        if (status & PNX8XXX_UART_INT_BREAK) {
-                sport->port.icount.brk++;
-                uart_handle_break(&sport->port);
-        }
-
-        /* Byte received */
-        if (status & PNX8XXX_UART_INT_RX)
+        /* Byte or break signal received */
+        if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK))
                 pnx8xxx_rx_chars(sport);
 
         /* TX holding register empty - transmit a byte */
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 5e39bac9c51b..56ff3e6864ea 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -670,8 +670,7 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
         dev_dbg(controller, "new message %p submitted for %s\n",
                         msg, spi->dev.bus_id);
 
-        if (unlikely(list_empty(&msg->transfers)
-                        || !spi->max_speed_hz))
+        if (unlikely(list_empty(&msg->transfers)))
                 return -EINVAL;
 
         if (as->stopping)
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 68d6f4988fb5..fe7e5f35e5d0 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -15,12 +15,15 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_spi.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/io.h>
 
-#include <syslib/virtex_devices.h>
-
 #define XILINX_SPI_NAME "xilinx_spi"
 
 /* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e)
@@ -144,23 +147,14 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
                 struct spi_transfer *t)
 {
         u8 bits_per_word;
-        u32 hz;
-        struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
 
         bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-        hz = (t) ? t->speed_hz : spi->max_speed_hz;
         if (bits_per_word != 8) {
                 dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
                         __func__, bits_per_word);
                 return -EINVAL;
         }
 
-        if (hz && xspi->speed_hz > hz) {
-                dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n",
-                        __func__, hz);
-                return -EINVAL;
-        }
-
         return 0;
 }
 
@@ -304,32 +298,38 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
         return IRQ_HANDLED;
 }
 
-static int __init xilinx_spi_probe(struct platform_device *dev)
+static int __init xilinx_spi_of_probe(struct of_device *ofdev,
+                                        const struct of_device_id *match)
 {
-        int ret = 0;
         struct spi_master *master;
         struct xilinx_spi *xspi;
-        struct xspi_platform_data *pdata;
-        struct resource *r;
+        struct resource r_irq_struct;
+        struct resource r_mem_struct;
+
+        struct resource *r_irq = &r_irq_struct;
+        struct resource *r_mem = &r_mem_struct;
+        int rc = 0;
+        const u32 *prop;
+        int len;
 
         /* Get resources(memory, IRQ) associated with the device */
-        master = spi_alloc_master(&dev->dev, sizeof(struct xilinx_spi));
+        master = spi_alloc_master(&ofdev->dev, sizeof(struct xilinx_spi));
 
         if (master == NULL) {
                 return -ENOMEM;
         }
 
-        platform_set_drvdata(dev, master);
-        pdata = dev->dev.platform_data;
+        dev_set_drvdata(&ofdev->dev, master);
 
-        if (pdata == NULL) {
-                ret = -ENODEV;
+        rc = of_address_to_resource(ofdev->node, 0, r_mem);
+        if (rc) {
+                dev_warn(&ofdev->dev, "invalid address\n");
                 goto put_master;
         }
 
-        r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-        if (r == NULL) {
-                ret = -ENODEV;
+        rc = of_irq_to_resource(ofdev->node, 0, r_irq);
+        if (rc == NO_IRQ) {
+                dev_warn(&ofdev->dev, "no IRQ found\n");
                 goto put_master;
         }
 
@@ -341,47 +341,57 @@ static int __init xilinx_spi_probe(struct platform_device *dev)
         xspi->bitbang.master->setup = xilinx_spi_setup;
         init_completion(&xspi->done);
 
-        if (!request_mem_region(r->start,
-                        r->end - r->start + 1, XILINX_SPI_NAME)) {
-                ret = -ENXIO;
+        xspi->irq = r_irq->start;
+
+        if (!request_mem_region(r_mem->start,
+                        r_mem->end - r_mem->start + 1, XILINX_SPI_NAME)) {
+                rc = -ENXIO;
+                dev_warn(&ofdev->dev, "memory request failure\n");
                 goto put_master;
         }
 
-        xspi->regs = ioremap(r->start, r->end - r->start + 1);
+        xspi->regs = ioremap(r_mem->start, r_mem->end - r_mem->start + 1);
         if (xspi->regs == NULL) {
-                ret = -ENOMEM;
+                rc = -ENOMEM;
+                dev_warn(&ofdev->dev, "ioremap failure\n");
                 goto put_master;
         }
+        xspi->irq = r_irq->start;
 
-        ret = platform_get_irq(dev, 0);
-        if (ret < 0) {
-                ret = -ENXIO;
-                goto unmap_io;
-        }
-        xspi->irq = ret;
+        /* dynamic bus assignment */
+        master->bus_num = -1;
 
-        master->bus_num = pdata->bus_num;
-        master->num_chipselect = pdata->num_chipselect;
-        xspi->speed_hz = pdata->speed_hz;
+        /* number of slave select bits is required */
+        prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
+        if (!prop || len < sizeof(*prop)) {
+                dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
+                goto put_master;
+        }
+        master->num_chipselect = *prop;
 
         /* SPI controller initializations */
         xspi_init_hw(xspi->regs);
 
         /* Register for SPI Interrupt */
-        ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
-        if (ret != 0)
+        rc = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
+        if (rc != 0) {
+                dev_warn(&ofdev->dev, "irq request failure: %d\n", xspi->irq);
                 goto unmap_io;
+        }
 
-        ret = spi_bitbang_start(&xspi->bitbang);
-        if (ret != 0) {
-                dev_err(&dev->dev, "spi_bitbang_start FAILED\n");
+        rc = spi_bitbang_start(&xspi->bitbang);
+        if (rc != 0) {
+                dev_err(&ofdev->dev, "spi_bitbang_start FAILED\n");
                 goto free_irq;
         }
 
-        dev_info(&dev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
-                        r->start, (u32)xspi->regs, xspi->irq);
+        dev_info(&ofdev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
+                        (unsigned int)r_mem->start, (u32)xspi->regs, xspi->irq);
 
-        return ret;
+        /* Add any subnodes on the SPI bus */
+        of_register_spi_devices(master, ofdev->node);
+
+        return rc;
 
 free_irq:
         free_irq(xspi->irq, xspi);
@@ -389,21 +399,21 @@ unmap_io:
         iounmap(xspi->regs);
 put_master:
         spi_master_put(master);
-        return ret;
+        return rc;
 }
 
-static int __devexit xilinx_spi_remove(struct platform_device *dev)
+static int __devexit xilinx_spi_remove(struct of_device *ofdev)
 {
         struct xilinx_spi *xspi;
         struct spi_master *master;
 
-        master = platform_get_drvdata(dev);
+        master = platform_get_drvdata(ofdev);
         xspi = spi_master_get_devdata(master);
 
         spi_bitbang_stop(&xspi->bitbang);
         free_irq(xspi->irq, xspi);
         iounmap(xspi->regs);
-        platform_set_drvdata(dev, 0);
+        dev_set_drvdata(&ofdev->dev, 0);
         spi_master_put(xspi->bitbang.master);
 
         return 0;
@@ -412,27 +422,42 @@ static int __devexit xilinx_spi_remove(struct platform_device *dev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:" XILINX_SPI_NAME);
 
-static struct platform_driver xilinx_spi_driver = {
-        .probe  = xilinx_spi_probe,
-        .remove = __devexit_p(xilinx_spi_remove),
+static int __exit xilinx_spi_of_remove(struct of_device *op)
+{
+        return xilinx_spi_remove(op);
+}
+
+static struct of_device_id xilinx_spi_of_match[] = {
+        { .compatible = "xlnx,xps-spi-2.00.a", },
+        { .compatible = "xlnx,xps-spi-2.00.b", },
+        {}
+};
+
+MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
+
+static struct of_platform_driver xilinx_spi_of_driver = {
+        .owner = THIS_MODULE,
+        .name = "xilinx-xps-spi",
+        .match_table = xilinx_spi_of_match,
+        .probe = xilinx_spi_of_probe,
+        .remove = __exit_p(xilinx_spi_of_remove),
         .driver = {
-                .name = XILINX_SPI_NAME,
+                .name = "xilinx-xps-spi",
                 .owner = THIS_MODULE,
         },
 };
 
 static int __init xilinx_spi_init(void)
 {
-        return platform_driver_register(&xilinx_spi_driver);
+        return of_register_platform_driver(&xilinx_spi_of_driver);
 }
 module_init(xilinx_spi_init);
 
 static void __exit xilinx_spi_exit(void)
 {
-        platform_driver_unregister(&xilinx_spi_driver);
+        of_unregister_platform_driver(&xilinx_spi_of_driver);
 }
 module_exit(xilinx_spi_exit);
-
 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
 MODULE_DESCRIPTION("Xilinx SPI driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d5d0e40b1e2d..94d5ee263c20 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1554,7 +1554,7 @@ static int usb_configure_device_otg(struct usb_device *udev)
                  * (Includes HNP test device.)
                  */
                 if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
-                        err = usb_port_suspend(udev);
+                        err = usb_port_suspend(udev, PMSG_SUSPEND);
                         if (err < 0)
                                 dev_dbg(&udev->dev, "HNP fail, %d\n", err);
                 }
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ef6cfa5a447f..c70a8f667d85 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2030,7 +2030,7 @@ static void ftdi_process_read(struct work_struct *work)
                         spin_unlock_irqrestore(&priv->rx_lock, flags);
                         dbg("%s - deferring remainder until unthrottled",
                                         __func__);
-                        return;
+                        goto out;
                 }
                 spin_unlock_irqrestore(&priv->rx_lock, flags);
                 /* if the port is closed stop trying to read */
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 7644ed249564..37e60b1d2ed9 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -335,7 +335,20 @@ static int bfin_bf54x_fb_check_var(struct fb_var_screeninfo *var,
                                    struct fb_info *info)
 {
 
-        if (var->bits_per_pixel != LCD_BPP) {
+        switch (var->bits_per_pixel) {
+        case 24:/* TRUECOLOUR, 16m */
+                var->red.offset = 16;
+                var->green.offset = 8;
+                var->blue.offset = 0;
+                var->red.length = var->green.length = var->blue.length = 8;
+                var->transp.offset = 0;
+                var->transp.length = 0;
+                var->transp.msb_right = 0;
+                var->red.msb_right = 0;
+                var->green.msb_right = 0;
+                var->blue.msb_right = 0;
+                break;
+        default:
                 pr_debug("%s: depth not supported: %u BPP\n", __func__,
                          var->bits_per_pixel);
                 return -EINVAL;
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index a9b3ada05d99..2a423d3a2a8e 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -254,7 +254,20 @@ static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var,
                                    struct fb_info *info)
 {
 
-        if (var->bits_per_pixel != LCD_BPP) {
+        switch (var->bits_per_pixel) {
+        case 24:/* TRUECOLOUR, 16m */
+                var->red.offset = 0;
+                var->green.offset = 8;
+                var->blue.offset = 16;
+                var->red.length = var->green.length = var->blue.length = 8;
+                var->transp.offset = 0;
+                var->transp.length = 0;
+                var->transp.msb_right = 0;
+                var->red.msb_right = 0;
+                var->green.msb_right = 0;
+                var->blue.msb_right = 0;
+                break;
+        default:
                 pr_debug("%s: depth not supported: %u BPP\n", __func__,
                          var->bits_per_pixel);
                 return -EINVAL;
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index 38ac805db97d..87f826e4c958 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -1006,7 +1006,7 @@ static int ps3fb_xdr_settings(u64 xdr_lpar, struct device *dev)
                         __func__, status);
                 return -ENXIO;
         }
-        dev_dbg(dev, "video:%p ioif:%lx lpar:%lx size:%lx\n",
+        dev_dbg(dev, "video:%p ioif:%lx lpar:%llx size:%lx\n",
                 ps3fb_videomemory.address, GPU_IOIF, xdr_lpar,
                 ps3fb_videomemory.size);
 
@@ -1133,7 +1133,7 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
                         __func__, status);
                 goto err;
         }
-        dev_dbg(&dev->core, "ddr:lpar:0x%lx\n", ddr_lpar);
+        dev_dbg(&dev->core, "ddr:lpar:0x%llx\n", ddr_lpar);
 
         status = lv1_gpu_context_allocate(ps3fb.memory_handle, 0,
                                           &ps3fb.context_handle,