diff options
author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-05-09 18:41:31 -0400 |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-05-09 18:41:31 -0400 |
commit | 3cb7396b7b26585b1ab7c1a8ca554ec103da5d37 (patch) | |
tree | 94720199f016045fe2a204ac8fd26c0029f4544c /drivers | |
parent | d0b6e0e380d6a32d479120a8b5d98cdff936ec8c (diff) | |
parent | 317a46a200e6514a1acf50ed30291160185a5c73 (diff) |
Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
ide: fix PIO setup on resume for ATAPI devices
ide: legacy PCI bus order probing fixes
ide: add ide_proc_register_port()
ide: add "initializing" argument to ide_register_hw()
ide: cable detection fixes (take 2)
ide: move IDE settings handling to ide-proc.c
ide: split off ioctl handling from IDE settings (v2)
ide: make /proc/ide/ optional
ide: add ide_tune_dma() helper
ide: rework the code for selecting the best DMA transfer mode (v3)
ide: fix UDMA/MWDMA/SWDMA masks (v3)
Diffstat (limited to 'drivers')
62 files changed, 1057 insertions, 1421 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 5bdf64b77913..1d06b415ede9 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig | |||
@@ -291,6 +291,17 @@ config IDE_TASK_IOCTL | |||
291 | 291 | ||
292 | If you are unsure, say N here. | 292 | If you are unsure, say N here. |
293 | 293 | ||
294 | config IDE_PROC_FS | ||
295 | bool "legacy /proc/ide/ support" | ||
296 | depends on IDE && PROC_FS | ||
297 | default y | ||
298 | help | ||
299 | This option enables support for the various files in | ||
300 | /proc/ide. In Linux 2.6 this has been superseded by | ||
301 | files in sysfs but many legacy applications rely on this. | ||
302 | |||
303 | If unsure say Y. | ||
304 | |||
294 | comment "IDE chipset support/bugfixes" | 305 | comment "IDE chipset support/bugfixes" |
295 | 306 | ||
296 | config IDE_GENERIC | 307 | config IDE_GENERIC |
@@ -360,6 +371,9 @@ config IDEPCI_SHARE_IRQ | |||
360 | It is safe to say Y to this question, in most cases. | 371 | It is safe to say Y to this question, in most cases. |
361 | If unsure, say N. | 372 | If unsure, say N. |
362 | 373 | ||
374 | config IDEPCI_PCIBUS_ORDER | ||
375 | def_bool PCI && BLK_DEV_IDE=y && BLK_DEV_IDEPCI | ||
376 | |||
363 | config BLK_DEV_OFFBOARD | 377 | config BLK_DEV_OFFBOARD |
364 | bool "Boot off-board chipsets first support" | 378 | bool "Boot off-board chipsets first support" |
365 | depends on PCI && BLK_DEV_IDEPCI | 379 | depends on PCI && BLK_DEV_IDEPCI |
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index d9f029e8ff74..75dc6969e0a7 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile | |||
@@ -20,7 +20,7 @@ ide-core-$(CONFIG_BLK_DEV_CMD640) += pci/cmd640.o | |||
20 | # Core IDE code - must come before legacy | 20 | # Core IDE code - must come before legacy |
21 | ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o | 21 | ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o |
22 | ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o | 22 | ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o |
23 | ide-core-$(CONFIG_PROC_FS) += ide-proc.o | 23 | ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o |
24 | ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o | 24 | ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o |
25 | ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o | 25 | ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o |
26 | 26 | ||
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 9d474e5fd8dc..f7449d04114a 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c | |||
@@ -45,7 +45,7 @@ bastide_register(unsigned int base, unsigned int aux, int irq, | |||
45 | hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20); | 45 | hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20); |
46 | hw.irq = irq; | 46 | hw.irq = irq; |
47 | 47 | ||
48 | ide_register_hw(&hw, hwif); | 48 | ide_register_hw(&hw, 0, hwif); |
49 | 49 | ||
50 | return 0; | 50 | return 0; |
51 | } | 51 | } |
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index e2953fc1fafb..1fe0457243db 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c | |||
@@ -342,7 +342,7 @@ static int icside_dma_check(ide_drive_t *drive) | |||
342 | * Enable DMA on any drive that has multiword DMA | 342 | * Enable DMA on any drive that has multiword DMA |
343 | */ | 343 | */ |
344 | if (id->field_valid & 2) { | 344 | if (id->field_valid & 2) { |
345 | xfer_mode = ide_dma_speed(drive, 0); | 345 | xfer_mode = ide_max_dma_mode(drive); |
346 | goto out; | 346 | goto out; |
347 | } | 347 | } |
348 | 348 | ||
@@ -591,7 +591,8 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) | |||
591 | state->hwif[0] = hwif; | 591 | state->hwif[0] = hwif; |
592 | 592 | ||
593 | probe_hwif_init(hwif); | 593 | probe_hwif_init(hwif); |
594 | create_proc_ide_interfaces(); | 594 | |
595 | ide_proc_register_port(hwif); | ||
595 | 596 | ||
596 | return 0; | 597 | return 0; |
597 | } | 598 | } |
@@ -679,7 +680,9 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) | |||
679 | 680 | ||
680 | probe_hwif_init(hwif); | 681 | probe_hwif_init(hwif); |
681 | probe_hwif_init(mate); | 682 | probe_hwif_init(mate); |
682 | create_proc_ide_interfaces(); | 683 | |
684 | ide_proc_register_port(hwif); | ||
685 | ide_proc_register_port(mate); | ||
683 | 686 | ||
684 | return 0; | 687 | return 0; |
685 | 688 | ||
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 23488c4d1fcd..a3d6744e870a 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c | |||
@@ -38,6 +38,6 @@ void __init ide_arm_init(void) | |||
38 | memset(&hw, 0, sizeof(hw)); | 38 | memset(&hw, 0, sizeof(hw)); |
39 | ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206); | 39 | ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206); |
40 | hw.irq = IDE_ARM_IRQ; | 40 | hw.irq = IDE_ARM_IRQ; |
41 | ide_register_hw(&hw, NULL); | 41 | ide_register_hw(&hw, 1, NULL); |
42 | } | 42 | } |
43 | } | 43 | } |
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index 9c6c49fdd2b1..890ea3fac3c6 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c | |||
@@ -76,7 +76,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) | |||
76 | hwif->gendev.parent = &ec->dev; | 76 | hwif->gendev.parent = &ec->dev; |
77 | hwif->noprobe = 0; | 77 | hwif->noprobe = 0; |
78 | probe_hwif_init(hwif); | 78 | probe_hwif_init(hwif); |
79 | create_proc_ide_interfaces(); | 79 | ide_proc_register_port(hwif); |
80 | ecard_set_drvdata(ec, hwif); | 80 | ecard_set_drvdata(ec, hwif); |
81 | goto out; | 81 | goto out; |
82 | } | 82 | } |
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 5e8efc89255a..c04cb25a01ff 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c | |||
@@ -796,7 +796,7 @@ init_e100_ide (void) | |||
796 | ide_offsets, | 796 | ide_offsets, |
797 | 0, 0, cris_ide_ack_intr, | 797 | 0, 0, cris_ide_ack_intr, |
798 | ide_default_irq(0)); | 798 | ide_default_irq(0)); |
799 | ide_register_hw(&hw, &hwif); | 799 | ide_register_hw(&hw, 1, &hwif); |
800 | hwif->mmio = 1; | 800 | hwif->mmio = 1; |
801 | hwif->chipset = ide_etrax100; | 801 | hwif->chipset = ide_etrax100; |
802 | hwif->tuneproc = &tune_cris_ide; | 802 | hwif->tuneproc = &tune_cris_ide; |
@@ -1004,7 +1004,7 @@ static int cris_ide_build_dmatable (ide_drive_t *drive) | |||
1004 | 1004 | ||
1005 | static int cris_config_drive_for_dma (ide_drive_t *drive) | 1005 | static int cris_config_drive_for_dma (ide_drive_t *drive) |
1006 | { | 1006 | { |
1007 | u8 speed = ide_dma_speed(drive, 1); | 1007 | u8 speed = ide_max_dma_mode(drive); |
1008 | 1008 | ||
1009 | if (!speed) | 1009 | if (!speed) |
1010 | return 0; | 1010 | return 0; |
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 88750a300337..6d26ad7360d5 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c | |||
@@ -101,7 +101,7 @@ void __init h8300_ide_init(void) | |||
101 | hw_setup(&hw); | 101 | hw_setup(&hw); |
102 | 102 | ||
103 | /* register if */ | 103 | /* register if */ |
104 | idx = ide_register_hw(&hw, &hwif); | 104 | idx = ide_register_hw(&hw, 1, &hwif); |
105 | if (idx == -1) { | 105 | if (idx == -1) { |
106 | printk(KERN_ERR "ide-h8300: IDE I/F register failed\n"); | 106 | printk(KERN_ERR "ide-h8300: IDE I/F register failed\n"); |
107 | return; | 107 | return; |
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 638becda81c6..252ab8295edf 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c | |||
@@ -3059,10 +3059,14 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) | |||
3059 | return nslots; | 3059 | return nslots; |
3060 | } | 3060 | } |
3061 | 3061 | ||
3062 | #ifdef CONFIG_IDE_PROC_FS | ||
3062 | static void ide_cdrom_add_settings(ide_drive_t *drive) | 3063 | static void ide_cdrom_add_settings(ide_drive_t *drive) |
3063 | { | 3064 | { |
3064 | ide_add_setting(drive, "dsc_overlap", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); | 3065 | ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); |
3065 | } | 3066 | } |
3067 | #else | ||
3068 | static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; } | ||
3069 | #endif | ||
3066 | 3070 | ||
3067 | /* | 3071 | /* |
3068 | * standard prep_rq_fn that builds 10 byte cmds | 3072 | * standard prep_rq_fn that builds 10 byte cmds |
@@ -3274,7 +3278,7 @@ int ide_cdrom_setup (ide_drive_t *drive) | |||
3274 | return 0; | 3278 | return 0; |
3275 | } | 3279 | } |
3276 | 3280 | ||
3277 | #ifdef CONFIG_PROC_FS | 3281 | #ifdef CONFIG_IDE_PROC_FS |
3278 | static | 3282 | static |
3279 | sector_t ide_cdrom_capacity (ide_drive_t *drive) | 3283 | sector_t ide_cdrom_capacity (ide_drive_t *drive) |
3280 | { | 3284 | { |
@@ -3291,7 +3295,7 @@ static void ide_cd_remove(ide_drive_t *drive) | |||
3291 | { | 3295 | { |
3292 | struct cdrom_info *info = drive->driver_data; | 3296 | struct cdrom_info *info = drive->driver_data; |
3293 | 3297 | ||
3294 | ide_unregister_subdriver(drive, info->driver); | 3298 | ide_proc_unregister_driver(drive, info->driver); |
3295 | 3299 | ||
3296 | del_gendisk(info->disk); | 3300 | del_gendisk(info->disk); |
3297 | 3301 | ||
@@ -3321,7 +3325,7 @@ static void ide_cd_release(struct kref *kref) | |||
3321 | 3325 | ||
3322 | static int ide_cd_probe(ide_drive_t *); | 3326 | static int ide_cd_probe(ide_drive_t *); |
3323 | 3327 | ||
3324 | #ifdef CONFIG_PROC_FS | 3328 | #ifdef CONFIG_IDE_PROC_FS |
3325 | static int proc_idecd_read_capacity | 3329 | static int proc_idecd_read_capacity |
3326 | (char *page, char **start, off_t off, int count, int *eof, void *data) | 3330 | (char *page, char **start, off_t off, int count, int *eof, void *data) |
3327 | { | 3331 | { |
@@ -3336,8 +3340,6 @@ static ide_proc_entry_t idecd_proc[] = { | |||
3336 | { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL }, | 3340 | { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL }, |
3337 | { NULL, 0, NULL, NULL } | 3341 | { NULL, 0, NULL, NULL } |
3338 | }; | 3342 | }; |
3339 | #else | ||
3340 | # define idecd_proc NULL | ||
3341 | #endif | 3343 | #endif |
3342 | 3344 | ||
3343 | static ide_driver_t ide_cdrom_driver = { | 3345 | static ide_driver_t ide_cdrom_driver = { |
@@ -3355,7 +3357,9 @@ static ide_driver_t ide_cdrom_driver = { | |||
3355 | .end_request = ide_end_request, | 3357 | .end_request = ide_end_request, |
3356 | .error = __ide_error, | 3358 | .error = __ide_error, |
3357 | .abort = __ide_abort, | 3359 | .abort = __ide_abort, |
3360 | #ifdef CONFIG_IDE_PROC_FS | ||
3358 | .proc = idecd_proc, | 3361 | .proc = idecd_proc, |
3362 | #endif | ||
3359 | }; | 3363 | }; |
3360 | 3364 | ||
3361 | static int idecd_open(struct inode * inode, struct file * file) | 3365 | static int idecd_open(struct inode * inode, struct file * file) |
@@ -3517,7 +3521,7 @@ static int ide_cd_probe(ide_drive_t *drive) | |||
3517 | 3521 | ||
3518 | ide_init_disk(g, drive); | 3522 | ide_init_disk(g, drive); |
3519 | 3523 | ||
3520 | ide_register_subdriver(drive, &ide_cdrom_driver); | 3524 | ide_proc_register_driver(drive, &ide_cdrom_driver); |
3521 | 3525 | ||
3522 | kref_init(&info->kref); | 3526 | kref_init(&info->kref); |
3523 | 3527 | ||
@@ -3534,7 +3538,7 @@ static int ide_cd_probe(ide_drive_t *drive) | |||
3534 | g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE; | 3538 | g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE; |
3535 | if (ide_cdrom_setup(drive)) { | 3539 | if (ide_cdrom_setup(drive)) { |
3536 | struct cdrom_device_info *devinfo = &info->devinfo; | 3540 | struct cdrom_device_info *devinfo = &info->devinfo; |
3537 | ide_unregister_subdriver(drive, &ide_cdrom_driver); | 3541 | ide_proc_unregister_driver(drive, &ide_cdrom_driver); |
3538 | kfree(info->buffer); | 3542 | kfree(info->buffer); |
3539 | kfree(info->toc); | 3543 | kfree(info->toc); |
3540 | kfree(info->changer_info); | 3544 | kfree(info->changer_info); |
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 37aa6ddd9702..7fff773f2df7 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c | |||
@@ -559,8 +559,7 @@ static sector_t idedisk_capacity (ide_drive_t *drive) | |||
559 | return drive->capacity64 - drive->sect0; | 559 | return drive->capacity64 - drive->sect0; |
560 | } | 560 | } |
561 | 561 | ||
562 | #ifdef CONFIG_PROC_FS | 562 | #ifdef CONFIG_IDE_PROC_FS |
563 | |||
564 | static int smart_enable(ide_drive_t *drive) | 563 | static int smart_enable(ide_drive_t *drive) |
565 | { | 564 | { |
566 | ide_task_t args; | 565 | ide_task_t args; |
@@ -678,12 +677,7 @@ static ide_proc_entry_t idedisk_proc[] = { | |||
678 | { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL }, | 677 | { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL }, |
679 | { NULL, 0, NULL, NULL } | 678 | { NULL, 0, NULL, NULL } |
680 | }; | 679 | }; |
681 | 680 | #endif /* CONFIG_IDE_PROC_FS */ | |
682 | #else | ||
683 | |||
684 | #define idedisk_proc NULL | ||
685 | |||
686 | #endif /* CONFIG_PROC_FS */ | ||
687 | 681 | ||
688 | static void idedisk_prepare_flush(request_queue_t *q, struct request *rq) | 682 | static void idedisk_prepare_flush(request_queue_t *q, struct request *rq) |
689 | { | 683 | { |
@@ -737,6 +731,9 @@ static int set_multcount(ide_drive_t *drive, int arg) | |||
737 | { | 731 | { |
738 | struct request rq; | 732 | struct request rq; |
739 | 733 | ||
734 | if (arg < 0 || arg > drive->id->max_multsect) | ||
735 | return -EINVAL; | ||
736 | |||
740 | if (drive->special.b.set_multmode) | 737 | if (drive->special.b.set_multmode) |
741 | return -EBUSY; | 738 | return -EBUSY; |
742 | ide_init_drive_cmd (&rq); | 739 | ide_init_drive_cmd (&rq); |
@@ -749,6 +746,9 @@ static int set_multcount(ide_drive_t *drive, int arg) | |||
749 | 746 | ||
750 | static int set_nowerr(ide_drive_t *drive, int arg) | 747 | static int set_nowerr(ide_drive_t *drive, int arg) |
751 | { | 748 | { |
749 | if (arg < 0 || arg > 1) | ||
750 | return -EINVAL; | ||
751 | |||
752 | if (ide_spin_wait_hwgroup(drive)) | 752 | if (ide_spin_wait_hwgroup(drive)) |
753 | return -EBUSY; | 753 | return -EBUSY; |
754 | drive->nowerr = arg; | 754 | drive->nowerr = arg; |
@@ -800,6 +800,9 @@ static int write_cache(ide_drive_t *drive, int arg) | |||
800 | ide_task_t args; | 800 | ide_task_t args; |
801 | int err = 1; | 801 | int err = 1; |
802 | 802 | ||
803 | if (arg < 0 || arg > 1) | ||
804 | return -EINVAL; | ||
805 | |||
803 | if (ide_id_has_flush_cache(drive->id)) { | 806 | if (ide_id_has_flush_cache(drive->id)) { |
804 | memset(&args, 0, sizeof(ide_task_t)); | 807 | memset(&args, 0, sizeof(ide_task_t)); |
805 | args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? | 808 | args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? |
@@ -835,6 +838,9 @@ static int set_acoustic (ide_drive_t *drive, int arg) | |||
835 | { | 838 | { |
836 | ide_task_t args; | 839 | ide_task_t args; |
837 | 840 | ||
841 | if (arg < 0 || arg > 254) | ||
842 | return -EINVAL; | ||
843 | |||
838 | memset(&args, 0, sizeof(ide_task_t)); | 844 | memset(&args, 0, sizeof(ide_task_t)); |
839 | args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? SETFEATURES_EN_AAM : | 845 | args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? SETFEATURES_EN_AAM : |
840 | SETFEATURES_DIS_AAM; | 846 | SETFEATURES_DIS_AAM; |
@@ -855,6 +861,9 @@ static int set_acoustic (ide_drive_t *drive, int arg) | |||
855 | */ | 861 | */ |
856 | static int set_lba_addressing(ide_drive_t *drive, int arg) | 862 | static int set_lba_addressing(ide_drive_t *drive, int arg) |
857 | { | 863 | { |
864 | if (arg < 0 || arg > 2) | ||
865 | return -EINVAL; | ||
866 | |||
858 | drive->addressing = 0; | 867 | drive->addressing = 0; |
859 | 868 | ||
860 | if (HWIF(drive)->no_lba48) | 869 | if (HWIF(drive)->no_lba48) |
@@ -866,23 +875,27 @@ static int set_lba_addressing(ide_drive_t *drive, int arg) | |||
866 | return 0; | 875 | return 0; |
867 | } | 876 | } |
868 | 877 | ||
878 | #ifdef CONFIG_IDE_PROC_FS | ||
869 | static void idedisk_add_settings(ide_drive_t *drive) | 879 | static void idedisk_add_settings(ide_drive_t *drive) |
870 | { | 880 | { |
871 | struct hd_driveid *id = drive->id; | 881 | struct hd_driveid *id = drive->id; |
872 | 882 | ||
873 | ide_add_setting(drive, "bios_cyl", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->bios_cyl, NULL); | 883 | ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->bios_cyl, NULL); |
874 | ide_add_setting(drive, "bios_head", SETTING_RW, -1, -1, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); | 884 | ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); |
875 | ide_add_setting(drive, "bios_sect", SETTING_RW, -1, -1, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); | 885 | ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); |
876 | ide_add_setting(drive, "address", SETTING_RW, HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, TYPE_INTA, 0, 2, 1, 1, &drive->addressing, set_lba_addressing); | 886 | ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1, &drive->addressing, set_lba_addressing); |
877 | ide_add_setting(drive, "bswap", SETTING_READ, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->bswap, NULL); | 887 | ide_add_setting(drive, "bswap", SETTING_READ, TYPE_BYTE, 0, 1, 1, 1, &drive->bswap, NULL); |
878 | ide_add_setting(drive, "multcount", id ? SETTING_RW : SETTING_READ, HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, TYPE_BYTE, 0, id ? id->max_multsect : 0, 1, 1, &drive->mult_count, set_multcount); | 888 | ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0, id->max_multsect, 1, 1, &drive->mult_count, set_multcount); |
879 | ide_add_setting(drive, "nowerr", SETTING_RW, HDIO_GET_NOWERR, HDIO_SET_NOWERR, TYPE_BYTE, 0, 1, 1, 1, &drive->nowerr, set_nowerr); | 889 | ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nowerr, set_nowerr); |
880 | ide_add_setting(drive, "lun", SETTING_RW, -1, -1, TYPE_INT, 0, 7, 1, 1, &drive->lun, NULL); | 890 | ide_add_setting(drive, "lun", SETTING_RW, TYPE_INT, 0, 7, 1, 1, &drive->lun, NULL); |
881 | ide_add_setting(drive, "wcache", SETTING_RW, HDIO_GET_WCACHE, HDIO_SET_WCACHE, TYPE_BYTE, 0, 1, 1, 1, &drive->wcache, write_cache); | 891 | ide_add_setting(drive, "wcache", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->wcache, write_cache); |
882 | ide_add_setting(drive, "acoustic", SETTING_RW, HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic); | 892 | ide_add_setting(drive, "acoustic", SETTING_RW, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic); |
883 | ide_add_setting(drive, "failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL); | 893 | ide_add_setting(drive, "failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL); |
884 | ide_add_setting(drive, "max_failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL); | 894 | ide_add_setting(drive, "max_failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL); |
885 | } | 895 | } |
896 | #else | ||
897 | static inline void idedisk_add_settings(ide_drive_t *drive) { ; } | ||
898 | #endif | ||
886 | 899 | ||
887 | static void idedisk_setup (ide_drive_t *drive) | 900 | static void idedisk_setup (ide_drive_t *drive) |
888 | { | 901 | { |
@@ -1001,7 +1014,7 @@ static void ide_disk_remove(ide_drive_t *drive) | |||
1001 | struct ide_disk_obj *idkp = drive->driver_data; | 1014 | struct ide_disk_obj *idkp = drive->driver_data; |
1002 | struct gendisk *g = idkp->disk; | 1015 | struct gendisk *g = idkp->disk; |
1003 | 1016 | ||
1004 | ide_unregister_subdriver(drive, idkp->driver); | 1017 | ide_proc_unregister_driver(drive, idkp->driver); |
1005 | 1018 | ||
1006 | del_gendisk(g); | 1019 | del_gendisk(g); |
1007 | 1020 | ||
@@ -1066,7 +1079,9 @@ static ide_driver_t idedisk_driver = { | |||
1066 | .end_request = ide_end_request, | 1079 | .end_request = ide_end_request, |
1067 | .error = __ide_error, | 1080 | .error = __ide_error, |
1068 | .abort = __ide_abort, | 1081 | .abort = __ide_abort, |
1082 | #ifdef CONFIG_IDE_PROC_FS | ||
1069 | .proc = idedisk_proc, | 1083 | .proc = idedisk_proc, |
1084 | #endif | ||
1070 | }; | 1085 | }; |
1071 | 1086 | ||
1072 | static int idedisk_open(struct inode *inode, struct file *filp) | 1087 | static int idedisk_open(struct inode *inode, struct file *filp) |
@@ -1140,9 +1155,49 @@ static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo) | |||
1140 | static int idedisk_ioctl(struct inode *inode, struct file *file, | 1155 | static int idedisk_ioctl(struct inode *inode, struct file *file, |
1141 | unsigned int cmd, unsigned long arg) | 1156 | unsigned int cmd, unsigned long arg) |
1142 | { | 1157 | { |
1158 | unsigned long flags; | ||
1143 | struct block_device *bdev = inode->i_bdev; | 1159 | struct block_device *bdev = inode->i_bdev; |
1144 | struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); | 1160 | struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); |
1145 | return generic_ide_ioctl(idkp->drive, file, bdev, cmd, arg); | 1161 | ide_drive_t *drive = idkp->drive; |
1162 | int err, (*setfunc)(ide_drive_t *, int); | ||
1163 | u8 *val; | ||
1164 | |||
1165 | switch (cmd) { | ||
1166 | case HDIO_GET_ADDRESS: val = &drive->addressing; goto read_val; | ||
1167 | case HDIO_GET_MULTCOUNT: val = &drive->mult_count; goto read_val; | ||
1168 | case HDIO_GET_NOWERR: val = &drive->nowerr; goto read_val; | ||
1169 | case HDIO_GET_WCACHE: val = &drive->wcache; goto read_val; | ||
1170 | case HDIO_GET_ACOUSTIC: val = &drive->acoustic; goto read_val; | ||
1171 | case HDIO_SET_ADDRESS: setfunc = set_lba_addressing; goto set_val; | ||
1172 | case HDIO_SET_MULTCOUNT: setfunc = set_multcount; goto set_val; | ||
1173 | case HDIO_SET_NOWERR: setfunc = set_nowerr; goto set_val; | ||
1174 | case HDIO_SET_WCACHE: setfunc = write_cache; goto set_val; | ||
1175 | case HDIO_SET_ACOUSTIC: setfunc = set_acoustic; goto set_val; | ||
1176 | } | ||
1177 | |||
1178 | return generic_ide_ioctl(drive, file, bdev, cmd, arg); | ||
1179 | |||
1180 | read_val: | ||
1181 | down(&ide_setting_sem); | ||
1182 | spin_lock_irqsave(&ide_lock, flags); | ||
1183 | err = *val; | ||
1184 | spin_unlock_irqrestore(&ide_lock, flags); | ||
1185 | up(&ide_setting_sem); | ||
1186 | return err >= 0 ? put_user(err, (long __user *)arg) : err; | ||
1187 | |||
1188 | set_val: | ||
1189 | if (bdev != bdev->bd_contains) | ||
1190 | err = -EINVAL; | ||
1191 | else { | ||
1192 | if (!capable(CAP_SYS_ADMIN)) | ||
1193 | err = -EACCES; | ||
1194 | else { | ||
1195 | down(&ide_setting_sem); | ||
1196 | err = setfunc(drive, arg); | ||
1197 | up(&ide_setting_sem); | ||
1198 | } | ||
1199 | } | ||
1200 | return err; | ||
1146 | } | 1201 | } |
1147 | 1202 | ||
1148 | static int idedisk_media_changed(struct gendisk *disk) | 1203 | static int idedisk_media_changed(struct gendisk *disk) |
@@ -1202,7 +1257,7 @@ static int ide_disk_probe(ide_drive_t *drive) | |||
1202 | 1257 | ||
1203 | ide_init_disk(g, drive); | 1258 | ide_init_disk(g, drive); |
1204 | 1259 | ||
1205 | ide_register_subdriver(drive, &idedisk_driver); | 1260 | ide_proc_register_driver(drive, &idedisk_driver); |
1206 | 1261 | ||
1207 | kref_init(&idkp->kref); | 1262 | kref_init(&idkp->kref); |
1208 | 1263 | ||
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index fd213088b06b..5fe85191d49c 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c | |||
@@ -705,6 +705,100 @@ int ide_use_dma(ide_drive_t *drive) | |||
705 | 705 | ||
706 | EXPORT_SYMBOL_GPL(ide_use_dma); | 706 | EXPORT_SYMBOL_GPL(ide_use_dma); |
707 | 707 | ||
708 | static const u8 xfer_mode_bases[] = { | ||
709 | XFER_UDMA_0, | ||
710 | XFER_MW_DMA_0, | ||
711 | XFER_SW_DMA_0, | ||
712 | }; | ||
713 | |||
714 | static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base) | ||
715 | { | ||
716 | struct hd_driveid *id = drive->id; | ||
717 | ide_hwif_t *hwif = drive->hwif; | ||
718 | unsigned int mask = 0; | ||
719 | |||
720 | switch(base) { | ||
721 | case XFER_UDMA_0: | ||
722 | if ((id->field_valid & 4) == 0) | ||
723 | break; | ||
724 | |||
725 | mask = id->dma_ultra & hwif->ultra_mask; | ||
726 | |||
727 | if (hwif->udma_filter) | ||
728 | mask &= hwif->udma_filter(drive); | ||
729 | |||
730 | if ((mask & 0x78) && (eighty_ninty_three(drive) == 0)) | ||
731 | mask &= 0x07; | ||
732 | break; | ||
733 | case XFER_MW_DMA_0: | ||
734 | mask = id->dma_mword & hwif->mwdma_mask; | ||
735 | break; | ||
736 | case XFER_SW_DMA_0: | ||
737 | mask = id->dma_1word & hwif->swdma_mask; | ||
738 | break; | ||
739 | default: | ||
740 | BUG(); | ||
741 | break; | ||
742 | } | ||
743 | |||
744 | return mask; | ||
745 | } | ||
746 | |||
747 | /** | ||
748 | * ide_max_dma_mode - compute DMA speed | ||
749 | * @drive: IDE device | ||
750 | * | ||
751 | * Checks the drive capabilities and returns the speed to use | ||
752 | * for the DMA transfer. Returns 0 if the drive is incapable | ||
753 | * of DMA transfers. | ||
754 | */ | ||
755 | |||
756 | u8 ide_max_dma_mode(ide_drive_t *drive) | ||
757 | { | ||
758 | ide_hwif_t *hwif = drive->hwif; | ||
759 | unsigned int mask; | ||
760 | int x, i; | ||
761 | u8 mode = 0; | ||
762 | |||
763 | if (drive->media != ide_disk && hwif->atapi_dma == 0) | ||
764 | return 0; | ||
765 | |||
766 | for (i = 0; i < ARRAY_SIZE(xfer_mode_bases); i++) { | ||
767 | mask = ide_get_mode_mask(drive, xfer_mode_bases[i]); | ||
768 | x = fls(mask) - 1; | ||
769 | if (x >= 0) { | ||
770 | mode = xfer_mode_bases[i] + x; | ||
771 | break; | ||
772 | } | ||
773 | } | ||
774 | |||
775 | printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode); | ||
776 | |||
777 | return mode; | ||
778 | } | ||
779 | |||
780 | EXPORT_SYMBOL_GPL(ide_max_dma_mode); | ||
781 | |||
782 | int ide_tune_dma(ide_drive_t *drive) | ||
783 | { | ||
784 | u8 speed; | ||
785 | |||
786 | /* TODO: use only ide_max_dma_mode() */ | ||
787 | if (!ide_use_dma(drive)) | ||
788 | return 0; | ||
789 | |||
790 | speed = ide_max_dma_mode(drive); | ||
791 | |||
792 | if (!speed) | ||
793 | return 0; | ||
794 | |||
795 | drive->hwif->speedproc(drive, speed); | ||
796 | |||
797 | return ide_dma_enable(drive); | ||
798 | } | ||
799 | |||
800 | EXPORT_SYMBOL_GPL(ide_tune_dma); | ||
801 | |||
708 | void ide_dma_verbose(ide_drive_t *drive) | 802 | void ide_dma_verbose(ide_drive_t *drive) |
709 | { | 803 | { |
710 | struct hd_driveid *id = drive->id; | 804 | struct hd_driveid *id = drive->id; |
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 57cd21c5b2c1..f429be88c4f9 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c | |||
@@ -1811,18 +1811,22 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) | |||
1811 | return 0; | 1811 | return 0; |
1812 | } | 1812 | } |
1813 | 1813 | ||
1814 | #ifdef CONFIG_IDE_PROC_FS | ||
1814 | static void idefloppy_add_settings(ide_drive_t *drive) | 1815 | static void idefloppy_add_settings(ide_drive_t *drive) |
1815 | { | 1816 | { |
1816 | idefloppy_floppy_t *floppy = drive->driver_data; | 1817 | idefloppy_floppy_t *floppy = drive->driver_data; |
1817 | 1818 | ||
1818 | /* | 1819 | /* |
1819 | * drive setting name read/write ioctl ioctl data type min max mul_factor div_factor data pointer set function | 1820 | * drive setting name read/write data type min max mul_factor div_factor data pointer set function |
1820 | */ | 1821 | */ |
1821 | ide_add_setting(drive, "bios_cyl", SETTING_RW, -1, -1, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); | 1822 | ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); |
1822 | ide_add_setting(drive, "bios_head", SETTING_RW, -1, -1, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); | 1823 | ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); |
1823 | ide_add_setting(drive, "bios_sect", SETTING_RW, -1, -1, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); | 1824 | ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); |
1824 | ide_add_setting(drive, "ticks", SETTING_RW, -1, -1, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL); | 1825 | ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL); |
1825 | } | 1826 | } |
1827 | #else | ||
1828 | static inline void idefloppy_add_settings(ide_drive_t *drive) { ; } | ||
1829 | #endif | ||
1826 | 1830 | ||
1827 | /* | 1831 | /* |
1828 | * Driver initialization. | 1832 | * Driver initialization. |
@@ -1873,7 +1877,7 @@ static void ide_floppy_remove(ide_drive_t *drive) | |||
1873 | idefloppy_floppy_t *floppy = drive->driver_data; | 1877 | idefloppy_floppy_t *floppy = drive->driver_data; |
1874 | struct gendisk *g = floppy->disk; | 1878 | struct gendisk *g = floppy->disk; |
1875 | 1879 | ||
1876 | ide_unregister_subdriver(drive, floppy->driver); | 1880 | ide_proc_unregister_driver(drive, floppy->driver); |
1877 | 1881 | ||
1878 | del_gendisk(g); | 1882 | del_gendisk(g); |
1879 | 1883 | ||
@@ -1892,8 +1896,7 @@ static void ide_floppy_release(struct kref *kref) | |||
1892 | kfree(floppy); | 1896 | kfree(floppy); |
1893 | } | 1897 | } |
1894 | 1898 | ||
1895 | #ifdef CONFIG_PROC_FS | 1899 | #ifdef CONFIG_IDE_PROC_FS |
1896 | |||
1897 | static int proc_idefloppy_read_capacity | 1900 | static int proc_idefloppy_read_capacity |
1898 | (char *page, char **start, off_t off, int count, int *eof, void *data) | 1901 | (char *page, char **start, off_t off, int count, int *eof, void *data) |
1899 | { | 1902 | { |
@@ -1909,12 +1912,7 @@ static ide_proc_entry_t idefloppy_proc[] = { | |||
1909 | { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, | 1912 | { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, |
1910 | { NULL, 0, NULL, NULL } | 1913 | { NULL, 0, NULL, NULL } |
1911 | }; | 1914 | }; |
1912 | 1915 | #endif /* CONFIG_IDE_PROC_FS */ | |
1913 | #else | ||
1914 | |||
1915 | #define idefloppy_proc NULL | ||
1916 | |||
1917 | #endif /* CONFIG_PROC_FS */ | ||
1918 | 1916 | ||
1919 | static int ide_floppy_probe(ide_drive_t *); | 1917 | static int ide_floppy_probe(ide_drive_t *); |
1920 | 1918 | ||
@@ -1933,7 +1931,9 @@ static ide_driver_t idefloppy_driver = { | |||
1933 | .end_request = idefloppy_do_end_request, | 1931 | .end_request = idefloppy_do_end_request, |
1934 | .error = __ide_error, | 1932 | .error = __ide_error, |
1935 | .abort = __ide_abort, | 1933 | .abort = __ide_abort, |
1934 | #ifdef CONFIG_IDE_PROC_FS | ||
1936 | .proc = idefloppy_proc, | 1935 | .proc = idefloppy_proc, |
1936 | #endif | ||
1937 | }; | 1937 | }; |
1938 | 1938 | ||
1939 | static int idefloppy_open(struct inode *inode, struct file *filp) | 1939 | static int idefloppy_open(struct inode *inode, struct file *filp) |
@@ -2159,7 +2159,7 @@ static int ide_floppy_probe(ide_drive_t *drive) | |||
2159 | 2159 | ||
2160 | ide_init_disk(g, drive); | 2160 | ide_init_disk(g, drive); |
2161 | 2161 | ||
2162 | ide_register_subdriver(drive, &idefloppy_driver); | 2162 | ide_proc_register_driver(drive, &idefloppy_driver); |
2163 | 2163 | ||
2164 | kref_init(&floppy->kref); | 2164 | kref_init(&floppy->kref); |
2165 | 2165 | ||
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 99fd56151131..0f72b98d727f 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c | |||
@@ -22,8 +22,6 @@ static int __init ide_generic_init(void) | |||
22 | if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) | 22 | if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) |
23 | ide_release_lock(); /* for atari only */ | 23 | ide_release_lock(); /* for atari only */ |
24 | 24 | ||
25 | create_proc_ide_interfaces(); | ||
26 | |||
27 | return 0; | 25 | return 0; |
28 | } | 26 | } |
29 | 27 | ||
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 8670112f1d39..8e568143d90d 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c | |||
@@ -172,15 +172,6 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * | |||
172 | 172 | ||
173 | memset(args, 0, sizeof(*args)); | 173 | memset(args, 0, sizeof(*args)); |
174 | 174 | ||
175 | if (drive->media != ide_disk) { | ||
176 | /* | ||
177 | * skip idedisk_pm_restore_pio and idedisk_pm_idle for ATAPI | ||
178 | * devices | ||
179 | */ | ||
180 | if (pm->pm_step == idedisk_pm_restore_pio) | ||
181 | pm->pm_step = ide_pm_restore_dma; | ||
182 | } | ||
183 | |||
184 | switch (pm->pm_step) { | 175 | switch (pm->pm_step) { |
185 | case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */ | 176 | case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */ |
186 | if (drive->media != ide_disk) | 177 | if (drive->media != ide_disk) |
@@ -207,7 +198,13 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * | |||
207 | case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */ | 198 | case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */ |
208 | if (drive->hwif->tuneproc != NULL) | 199 | if (drive->hwif->tuneproc != NULL) |
209 | drive->hwif->tuneproc(drive, 255); | 200 | drive->hwif->tuneproc(drive, 255); |
210 | ide_complete_power_step(drive, rq, 0, 0); | 201 | /* |
202 | * skip idedisk_pm_idle for ATAPI devices | ||
203 | */ | ||
204 | if (drive->media != ide_disk) | ||
205 | pm->pm_step = ide_pm_restore_dma; | ||
206 | else | ||
207 | ide_complete_power_step(drive, rq, 0, 0); | ||
211 | return ide_stopped; | 208 | return ide_stopped; |
212 | 209 | ||
213 | case idedisk_pm_idle: /* Resume step 2 (idle) */ | 210 | case idedisk_pm_idle: /* Resume step 2 (idle) */ |
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 3caa176b3155..f0be5f665a0e 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c | |||
@@ -571,51 +571,54 @@ EXPORT_SYMBOL(ide_wait_stat); | |||
571 | */ | 571 | */ |
572 | u8 eighty_ninty_three (ide_drive_t *drive) | 572 | u8 eighty_ninty_three (ide_drive_t *drive) |
573 | { | 573 | { |
574 | if(HWIF(drive)->udma_four == 0) | 574 | ide_hwif_t *hwif = drive->hwif; |
575 | return 0; | 575 | struct hd_driveid *id = drive->id; |
576 | |||
577 | if (hwif->udma_four == 0) | ||
578 | goto no_80w; | ||
576 | 579 | ||
577 | /* Check for SATA but only if we are ATA5 or higher */ | 580 | /* Check for SATA but only if we are ATA5 or higher */ |
578 | if (drive->id->hw_config == 0 && (drive->id->major_rev_num & 0x7FE0)) | 581 | if (id->hw_config == 0 && (id->major_rev_num & 0x7FE0)) |
579 | return 1; | 582 | return 1; |
580 | if (!(drive->id->hw_config & 0x6000)) | 583 | |
581 | return 0; | ||
582 | #ifndef CONFIG_IDEDMA_IVB | ||
583 | if(!(drive->id->hw_config & 0x4000)) | ||
584 | return 0; | ||
585 | #endif /* CONFIG_IDEDMA_IVB */ | ||
586 | /* | 584 | /* |
587 | * FIXME: | 585 | * FIXME: |
588 | * - change master/slave IDENTIFY order | 586 | * - change master/slave IDENTIFY order |
589 | * - force bit13 (80c cable present) check | 587 | * - force bit13 (80c cable present) check |
590 | * (unless the slave device is pre-ATA3) | 588 | * (unless the slave device is pre-ATA3) |
591 | */ | 589 | */ |
592 | return 1; | 590 | #ifndef CONFIG_IDEDMA_IVB |
593 | } | 591 | if (id->hw_config & 0x4000) |
592 | #else | ||
593 | if (id->hw_config & 0x6000) | ||
594 | #endif | ||
595 | return 1; | ||
596 | |||
597 | no_80w: | ||
598 | if (drive->udma33_warned == 1) | ||
599 | return 0; | ||
594 | 600 | ||
595 | EXPORT_SYMBOL(eighty_ninty_three); | 601 | printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, " |
602 | "limiting max speed to UDMA33\n", | ||
603 | drive->name, hwif->udma_four ? "drive" : "host"); | ||
604 | |||
605 | drive->udma33_warned = 1; | ||
606 | |||
607 | return 0; | ||
608 | } | ||
596 | 609 | ||
597 | int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) | 610 | int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) |
598 | { | 611 | { |
599 | if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) && | 612 | if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) && |
600 | (args->tfRegister[IDE_SECTOR_OFFSET] > XFER_UDMA_2) && | 613 | (args->tfRegister[IDE_SECTOR_OFFSET] > XFER_UDMA_2) && |
601 | (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER)) { | 614 | (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER)) { |
602 | #ifndef CONFIG_IDEDMA_IVB | 615 | if (eighty_ninty_three(drive) == 0) { |
603 | if ((drive->id->hw_config & 0x6000) == 0) { | 616 | printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " |
604 | #else /* !CONFIG_IDEDMA_IVB */ | 617 | "be set\n", drive->name); |
605 | if (((drive->id->hw_config & 0x2000) == 0) || | ||
606 | ((drive->id->hw_config & 0x4000) == 0)) { | ||
607 | #endif /* CONFIG_IDEDMA_IVB */ | ||
608 | printk("%s: Speed warnings UDMA 3/4/5 is not " | ||
609 | "functional.\n", drive->name); | ||
610 | return 1; | ||
611 | } | ||
612 | if (!HWIF(drive)->udma_four) { | ||
613 | printk("%s: Speed warnings UDMA 3/4/5 is not " | ||
614 | "functional.\n", | ||
615 | HWIF(drive)->name); | ||
616 | return 1; | 618 | return 1; |
617 | } | 619 | } |
618 | } | 620 | } |
621 | |||
619 | return 0; | 622 | return 0; |
620 | } | 623 | } |
621 | 624 | ||
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 68719314df3f..3be3c69383f2 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c | |||
@@ -69,123 +69,41 @@ char *ide_xfer_verbose (u8 xfer_rate) | |||
69 | EXPORT_SYMBOL(ide_xfer_verbose); | 69 | EXPORT_SYMBOL(ide_xfer_verbose); |
70 | 70 | ||
71 | /** | 71 | /** |
72 | * ide_dma_speed - compute DMA speed | 72 | * ide_rate_filter - filter transfer mode |
73 | * @drive: drive | 73 | * @drive: IDE device |
74 | * @mode: modes available | ||
75 | * | ||
76 | * Checks the drive capabilities and returns the speed to use | ||
77 | * for the DMA transfer. Returns 0 if the drive is incapable | ||
78 | * of DMA transfers. | ||
79 | */ | ||
80 | |||
81 | u8 ide_dma_speed(ide_drive_t *drive, u8 mode) | ||
82 | { | ||
83 | struct hd_driveid *id = drive->id; | ||
84 | ide_hwif_t *hwif = HWIF(drive); | ||
85 | u8 ultra_mask, mwdma_mask, swdma_mask; | ||
86 | u8 speed = 0; | ||
87 | |||
88 | if (drive->media != ide_disk && hwif->atapi_dma == 0) | ||
89 | return 0; | ||
90 | |||
91 | /* Capable of UltraDMA modes? */ | ||
92 | ultra_mask = id->dma_ultra & hwif->ultra_mask; | ||
93 | |||
94 | if (!(id->field_valid & 4)) | ||
95 | mode = 0; /* fallback to MW/SW DMA if no UltraDMA */ | ||
96 | |||
97 | switch (mode) { | ||
98 | case 4: | ||
99 | if (ultra_mask & 0x40) { | ||
100 | speed = XFER_UDMA_6; | ||
101 | break; | ||
102 | } | ||
103 | case 3: | ||
104 | if (ultra_mask & 0x20) { | ||
105 | speed = XFER_UDMA_5; | ||
106 | break; | ||
107 | } | ||
108 | case 2: | ||
109 | if (ultra_mask & 0x10) { | ||
110 | speed = XFER_UDMA_4; | ||
111 | break; | ||
112 | } | ||
113 | if (ultra_mask & 0x08) { | ||
114 | speed = XFER_UDMA_3; | ||
115 | break; | ||
116 | } | ||
117 | case 1: | ||
118 | if (ultra_mask & 0x04) { | ||
119 | speed = XFER_UDMA_2; | ||
120 | break; | ||
121 | } | ||
122 | if (ultra_mask & 0x02) { | ||
123 | speed = XFER_UDMA_1; | ||
124 | break; | ||
125 | } | ||
126 | if (ultra_mask & 0x01) { | ||
127 | speed = XFER_UDMA_0; | ||
128 | break; | ||
129 | } | ||
130 | case 0: | ||
131 | mwdma_mask = id->dma_mword & hwif->mwdma_mask; | ||
132 | |||
133 | if (mwdma_mask & 0x04) { | ||
134 | speed = XFER_MW_DMA_2; | ||
135 | break; | ||
136 | } | ||
137 | if (mwdma_mask & 0x02) { | ||
138 | speed = XFER_MW_DMA_1; | ||
139 | break; | ||
140 | } | ||
141 | if (mwdma_mask & 0x01) { | ||
142 | speed = XFER_MW_DMA_0; | ||
143 | break; | ||
144 | } | ||
145 | |||
146 | swdma_mask = id->dma_1word & hwif->swdma_mask; | ||
147 | |||
148 | if (swdma_mask & 0x04) { | ||
149 | speed = XFER_SW_DMA_2; | ||
150 | break; | ||
151 | } | ||
152 | if (swdma_mask & 0x02) { | ||
153 | speed = XFER_SW_DMA_1; | ||
154 | break; | ||
155 | } | ||
156 | if (swdma_mask & 0x01) { | ||
157 | speed = XFER_SW_DMA_0; | ||
158 | break; | ||
159 | } | ||
160 | } | ||
161 | |||
162 | return speed; | ||
163 | } | ||
164 | EXPORT_SYMBOL(ide_dma_speed); | ||
165 | |||
166 | |||
167 | /** | ||
168 | * ide_rate_filter - return best speed for mode | ||
169 | * @mode: modes available | ||
170 | * @speed: desired speed | 74 | * @speed: desired speed |
171 | * | 75 | * |
172 | * Given the available DMA/UDMA mode this function returns | 76 | * Given the available transfer modes this function returns |
173 | * the best available speed at or below the speed requested. | 77 | * the best available speed at or below the speed requested. |
78 | * | ||
79 | * FIXME: filter also PIO/SWDMA/MWDMA modes | ||
174 | */ | 80 | */ |
175 | 81 | ||
176 | u8 ide_rate_filter (u8 mode, u8 speed) | 82 | u8 ide_rate_filter(ide_drive_t *drive, u8 speed) |
177 | { | 83 | { |
178 | #ifdef CONFIG_BLK_DEV_IDEDMA | 84 | #ifdef CONFIG_BLK_DEV_IDEDMA |
179 | static u8 speed_max[] = { | 85 | ide_hwif_t *hwif = drive->hwif; |
180 | XFER_MW_DMA_2, XFER_UDMA_2, XFER_UDMA_4, | 86 | u8 mask = hwif->ultra_mask, mode = XFER_MW_DMA_2; |
181 | XFER_UDMA_5, XFER_UDMA_6 | 87 | |
182 | }; | 88 | if (hwif->udma_filter) |
89 | mask = hwif->udma_filter(drive); | ||
90 | |||
91 | /* | ||
92 | * TODO: speed > XFER_UDMA_2 extra check is needed to avoid false | ||
93 | * cable warning from eighty_ninty_three(), moving ide_rate_filter() | ||
94 | * calls from ->speedproc to core code will make this hack go away | ||
95 | */ | ||
96 | if (speed > XFER_UDMA_2) { | ||
97 | if ((mask & 0x78) && (eighty_ninty_three(drive) == 0)) | ||
98 | mask &= 0x07; | ||
99 | } | ||
100 | |||
101 | if (mask) | ||
102 | mode = fls(mask) - 1 + XFER_UDMA_0; | ||
183 | 103 | ||
184 | // printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed); | 104 | // printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed); |
185 | 105 | ||
186 | /* So that we remember to update this if new modes appear */ | 106 | return min(speed, mode); |
187 | BUG_ON(mode > 4); | ||
188 | return min(speed, speed_max[mode]); | ||
189 | #else /* !CONFIG_BLK_DEV_IDEDMA */ | 107 | #else /* !CONFIG_BLK_DEV_IDEDMA */ |
190 | return min(speed, (u8)XFER_PIO_4); | 108 | return min(speed, (u8)XFER_PIO_4); |
191 | #endif /* CONFIG_BLK_DEV_IDEDMA */ | 109 | #endif /* CONFIG_BLK_DEV_IDEDMA */ |
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 98410ca044cf..2b8009c50e91 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c | |||
@@ -42,7 +42,7 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id | |||
42 | hw.irq = pnp_irq(dev, 0); | 42 | hw.irq = pnp_irq(dev, 0); |
43 | hw.dma = NO_DMA; | 43 | hw.dma = NO_DMA; |
44 | 44 | ||
45 | index = ide_register_hw(&hw, &hwif); | 45 | index = ide_register_hw(&hw, 1, &hwif); |
46 | 46 | ||
47 | if (index != -1) { | 47 | if (index != -1) { |
48 | printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); | 48 | printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); |
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 8f15c23aa70d..3cebed77f55d 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c | |||
@@ -1427,6 +1427,9 @@ int ideprobe_init (void) | |||
1427 | } | 1427 | } |
1428 | } | 1428 | } |
1429 | } | 1429 | } |
1430 | for (index = 0; index < MAX_HWIFS; ++index) | ||
1431 | if (probe[index]) | ||
1432 | ide_proc_register_port(&ide_hwifs[index]); | ||
1430 | return 0; | 1433 | return 0; |
1431 | } | 1434 | } |
1432 | 1435 | ||
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index a9e0b30fb1f2..d50bd996ff22 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c | |||
@@ -3,6 +3,8 @@ | |||
3 | * | 3 | * |
4 | * Copyright (C) 1997-1998 Mark Lord | 4 | * Copyright (C) 1997-1998 Mark Lord |
5 | * Copyright (C) 2003 Red Hat <alan@redhat.com> | 5 | * Copyright (C) 2003 Red Hat <alan@redhat.com> |
6 | * | ||
7 | * Some code was moved here from ide.c, see it for original copyrights. | ||
6 | */ | 8 | */ |
7 | 9 | ||
8 | /* | 10 | /* |
@@ -37,6 +39,8 @@ | |||
37 | 39 | ||
38 | #include <asm/io.h> | 40 | #include <asm/io.h> |
39 | 41 | ||
42 | static struct proc_dir_entry *proc_ide_root; | ||
43 | |||
40 | static int proc_ide_read_imodel | 44 | static int proc_ide_read_imodel |
41 | (char *page, char **start, off_t off, int count, int *eof, void *data) | 45 | (char *page, char **start, off_t off, int count, int *eof, void *data) |
42 | { | 46 | { |
@@ -121,6 +125,265 @@ static int proc_ide_read_identify | |||
121 | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 125 | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); |
122 | } | 126 | } |
123 | 127 | ||
128 | /** | ||
129 | * __ide_add_setting - add an ide setting option | ||
130 | * @drive: drive to use | ||
131 | * @name: setting name | ||
132 | * @rw: true if the function is read write | ||
133 | * @data_type: type of data | ||
134 | * @min: range minimum | ||
135 | * @max: range maximum | ||
136 | * @mul_factor: multiplication scale | ||
137 | * @div_factor: divison scale | ||
138 | * @data: private data field | ||
139 | * @set: setting | ||
140 | * @auto_remove: setting auto removal flag | ||
141 | * | ||
142 | * Removes the setting named from the device if it is present. | ||
143 | * The function takes the settings_lock to protect against | ||
144 | * parallel changes. This function must not be called from IRQ | ||
145 | * context. Returns 0 on success or -1 on failure. | ||
146 | * | ||
147 | * BUGS: This code is seriously over-engineered. There is also | ||
148 | * magic about how the driver specific features are setup. If | ||
149 | * a driver is attached we assume the driver settings are auto | ||
150 | * remove. | ||
151 | */ | ||
152 | |||
153 | static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove) | ||
154 | { | ||
155 | ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL; | ||
156 | |||
157 | down(&ide_setting_sem); | ||
158 | while ((*p) && strcmp((*p)->name, name) < 0) | ||
159 | p = &((*p)->next); | ||
160 | if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL) | ||
161 | goto abort; | ||
162 | if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL) | ||
163 | goto abort; | ||
164 | strcpy(setting->name, name); | ||
165 | setting->rw = rw; | ||
166 | setting->data_type = data_type; | ||
167 | setting->min = min; | ||
168 | setting->max = max; | ||
169 | setting->mul_factor = mul_factor; | ||
170 | setting->div_factor = div_factor; | ||
171 | setting->data = data; | ||
172 | setting->set = set; | ||
173 | |||
174 | setting->next = *p; | ||
175 | if (auto_remove) | ||
176 | setting->auto_remove = 1; | ||
177 | *p = setting; | ||
178 | up(&ide_setting_sem); | ||
179 | return 0; | ||
180 | abort: | ||
181 | up(&ide_setting_sem); | ||
182 | kfree(setting); | ||
183 | return -1; | ||
184 | } | ||
185 | |||
186 | int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set) | ||
187 | { | ||
188 | return __ide_add_setting(drive, name, rw, data_type, min, max, mul_factor, div_factor, data, set, 1); | ||
189 | } | ||
190 | |||
191 | EXPORT_SYMBOL(ide_add_setting); | ||
192 | |||
193 | /** | ||
194 | * __ide_remove_setting - remove an ide setting option | ||
195 | * @drive: drive to use | ||
196 | * @name: setting name | ||
197 | * | ||
198 | * Removes the setting named from the device if it is present. | ||
199 | * The caller must hold the setting semaphore. | ||
200 | */ | ||
201 | |||
202 | static void __ide_remove_setting (ide_drive_t *drive, char *name) | ||
203 | { | ||
204 | ide_settings_t **p, *setting; | ||
205 | |||
206 | p = (ide_settings_t **) &drive->settings; | ||
207 | |||
208 | while ((*p) && strcmp((*p)->name, name)) | ||
209 | p = &((*p)->next); | ||
210 | if ((setting = (*p)) == NULL) | ||
211 | return; | ||
212 | |||
213 | (*p) = setting->next; | ||
214 | |||
215 | kfree(setting->name); | ||
216 | kfree(setting); | ||
217 | } | ||
218 | |||
219 | /** | ||
220 | * auto_remove_settings - remove driver specific settings | ||
221 | * @drive: drive | ||
222 | * | ||
223 | * Automatically remove all the driver specific settings for this | ||
224 | * drive. This function may not be called from IRQ context. The | ||
225 | * caller must hold ide_setting_sem. | ||
226 | */ | ||
227 | |||
228 | static void auto_remove_settings (ide_drive_t *drive) | ||
229 | { | ||
230 | ide_settings_t *setting; | ||
231 | repeat: | ||
232 | setting = drive->settings; | ||
233 | while (setting) { | ||
234 | if (setting->auto_remove) { | ||
235 | __ide_remove_setting(drive, setting->name); | ||
236 | goto repeat; | ||
237 | } | ||
238 | setting = setting->next; | ||
239 | } | ||
240 | } | ||
241 | |||
242 | /** | ||
243 | * ide_find_setting_by_name - find a drive specific setting | ||
244 | * @drive: drive to scan | ||
245 | * @name: setting name | ||
246 | * | ||
247 | * Scan's the device setting table for a matching entry and returns | ||
248 | * this or NULL if no entry is found. The caller must hold the | ||
249 | * setting semaphore | ||
250 | */ | ||
251 | |||
252 | static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name) | ||
253 | { | ||
254 | ide_settings_t *setting = drive->settings; | ||
255 | |||
256 | while (setting) { | ||
257 | if (strcmp(setting->name, name) == 0) | ||
258 | break; | ||
259 | setting = setting->next; | ||
260 | } | ||
261 | return setting; | ||
262 | } | ||
263 | |||
264 | /** | ||
265 | * ide_read_setting - read an IDE setting | ||
266 | * @drive: drive to read from | ||
267 | * @setting: drive setting | ||
268 | * | ||
269 | * Read a drive setting and return the value. The caller | ||
270 | * must hold the ide_setting_sem when making this call. | ||
271 | * | ||
272 | * BUGS: the data return and error are the same return value | ||
273 | * so an error -EINVAL and true return of the same value cannot | ||
274 | * be told apart | ||
275 | */ | ||
276 | |||
277 | static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting) | ||
278 | { | ||
279 | int val = -EINVAL; | ||
280 | unsigned long flags; | ||
281 | |||
282 | if ((setting->rw & SETTING_READ)) { | ||
283 | spin_lock_irqsave(&ide_lock, flags); | ||
284 | switch(setting->data_type) { | ||
285 | case TYPE_BYTE: | ||
286 | val = *((u8 *) setting->data); | ||
287 | break; | ||
288 | case TYPE_SHORT: | ||
289 | val = *((u16 *) setting->data); | ||
290 | break; | ||
291 | case TYPE_INT: | ||
292 | val = *((u32 *) setting->data); | ||
293 | break; | ||
294 | } | ||
295 | spin_unlock_irqrestore(&ide_lock, flags); | ||
296 | } | ||
297 | return val; | ||
298 | } | ||
299 | |||
300 | /** | ||
301 | * ide_write_setting - read an IDE setting | ||
302 | * @drive: drive to read from | ||
303 | * @setting: drive setting | ||
304 | * @val: value | ||
305 | * | ||
306 | * Write a drive setting if it is possible. The caller | ||
307 | * must hold the ide_setting_sem when making this call. | ||
308 | * | ||
309 | * BUGS: the data return and error are the same return value | ||
310 | * so an error -EINVAL and true return of the same value cannot | ||
311 | * be told apart | ||
312 | * | ||
313 | * FIXME: This should be changed to enqueue a special request | ||
314 | * to the driver to change settings, and then wait on a sema for completion. | ||
315 | * The current scheme of polling is kludgy, though safe enough. | ||
316 | */ | ||
317 | |||
318 | static int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val) | ||
319 | { | ||
320 | if (!capable(CAP_SYS_ADMIN)) | ||
321 | return -EACCES; | ||
322 | if (setting->set) | ||
323 | return setting->set(drive, val); | ||
324 | if (!(setting->rw & SETTING_WRITE)) | ||
325 | return -EPERM; | ||
326 | if (val < setting->min || val > setting->max) | ||
327 | return -EINVAL; | ||
328 | if (ide_spin_wait_hwgroup(drive)) | ||
329 | return -EBUSY; | ||
330 | switch (setting->data_type) { | ||
331 | case TYPE_BYTE: | ||
332 | *((u8 *) setting->data) = val; | ||
333 | break; | ||
334 | case TYPE_SHORT: | ||
335 | *((u16 *) setting->data) = val; | ||
336 | break; | ||
337 | case TYPE_INT: | ||
338 | *((u32 *) setting->data) = val; | ||
339 | break; | ||
340 | } | ||
341 | spin_unlock_irq(&ide_lock); | ||
342 | return 0; | ||
343 | } | ||
344 | |||
345 | static int set_xfer_rate (ide_drive_t *drive, int arg) | ||
346 | { | ||
347 | int err; | ||
348 | |||
349 | if (arg < 0 || arg > 70) | ||
350 | return -EINVAL; | ||
351 | |||
352 | err = ide_wait_cmd(drive, | ||
353 | WIN_SETFEATURES, (u8) arg, | ||
354 | SETFEATURES_XFER, 0, NULL); | ||
355 | |||
356 | if (!err && arg) { | ||
357 | ide_set_xfer_rate(drive, (u8) arg); | ||
358 | ide_driveid_update(drive); | ||
359 | } | ||
360 | return err; | ||
361 | } | ||
362 | |||
363 | /** | ||
364 | * ide_add_generic_settings - generic ide settings | ||
365 | * @drive: drive being configured | ||
366 | * | ||
367 | * Add the generic parts of the system settings to the /proc files. | ||
368 | * The caller must not be holding the ide_setting_sem. | ||
369 | */ | ||
370 | |||
371 | void ide_add_generic_settings (ide_drive_t *drive) | ||
372 | { | ||
373 | /* | ||
374 | * drive setting name read/write access data type min max mul_factor div_factor data pointer set function | ||
375 | */ | ||
376 | __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0); | ||
377 | __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0); | ||
378 | __ide_add_setting(drive, "nice1", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0); | ||
379 | __ide_add_setting(drive, "pio_mode", SETTING_WRITE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0); | ||
380 | __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0); | ||
381 | __ide_add_setting(drive, "using_dma", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0); | ||
382 | __ide_add_setting(drive, "init_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0); | ||
383 | __ide_add_setting(drive, "current_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0); | ||
384 | __ide_add_setting(drive, "number", SETTING_RW, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0); | ||
385 | } | ||
386 | |||
124 | static void proc_ide_settings_warn(void) | 387 | static void proc_ide_settings_warn(void) |
125 | { | 388 | { |
126 | static int warned = 0; | 389 | static int warned = 0; |
@@ -399,7 +662,7 @@ static ide_proc_entry_t generic_drive_entries[] = { | |||
399 | { NULL, 0, NULL, NULL } | 662 | { NULL, 0, NULL, NULL } |
400 | }; | 663 | }; |
401 | 664 | ||
402 | void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data) | 665 | static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data) |
403 | { | 666 | { |
404 | struct proc_dir_entry *ent; | 667 | struct proc_dir_entry *ent; |
405 | 668 | ||
@@ -415,7 +678,7 @@ void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void | |||
415 | } | 678 | } |
416 | } | 679 | } |
417 | 680 | ||
418 | void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p) | 681 | static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p) |
419 | { | 682 | { |
420 | if (!dir || !p) | 683 | if (!dir || !p) |
421 | return; | 684 | return; |
@@ -425,6 +688,51 @@ void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p) | |||
425 | } | 688 | } |
426 | } | 689 | } |
427 | 690 | ||
691 | void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) | ||
692 | { | ||
693 | ide_add_proc_entries(drive->proc, driver->proc, drive); | ||
694 | } | ||
695 | |||
696 | EXPORT_SYMBOL(ide_proc_register_driver); | ||
697 | |||
698 | /** | ||
699 | * ide_proc_unregister_driver - remove driver specific data | ||
700 | * @drive: drive | ||
701 | * @driver: driver | ||
702 | * | ||
703 | * Clean up the driver specific /proc files and IDE settings | ||
704 | * for a given drive. | ||
705 | * | ||
706 | * Takes ide_setting_sem and ide_lock. | ||
707 | * Caller must hold none of the locks. | ||
708 | */ | ||
709 | |||
710 | void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) | ||
711 | { | ||
712 | unsigned long flags; | ||
713 | |||
714 | ide_remove_proc_entries(drive->proc, driver->proc); | ||
715 | |||
716 | down(&ide_setting_sem); | ||
717 | spin_lock_irqsave(&ide_lock, flags); | ||
718 | /* | ||
719 | * ide_setting_sem protects the settings list | ||
720 | * ide_lock protects the use of settings | ||
721 | * | ||
722 | * so we need to hold both, ide_settings_sem because we want to | ||
723 | * modify the settings list, and ide_lock because we cannot take | ||
724 | * a setting out that is being used. | ||
725 | * | ||
726 | * OTOH both ide_{read,write}_setting are only ever used under | ||
727 | * ide_setting_sem. | ||
728 | */ | ||
729 | auto_remove_settings(drive); | ||
730 | spin_unlock_irqrestore(&ide_lock, flags); | ||
731 | up(&ide_setting_sem); | ||
732 | } | ||
733 | |||
734 | EXPORT_SYMBOL(ide_proc_unregister_driver); | ||
735 | |||
428 | static void create_proc_ide_drives(ide_hwif_t *hwif) | 736 | static void create_proc_ide_drives(ide_hwif_t *hwif) |
429 | { | 737 | { |
430 | int d; | 738 | int d; |
@@ -477,26 +785,24 @@ static ide_proc_entry_t hwif_entries[] = { | |||
477 | { NULL, 0, NULL, NULL } | 785 | { NULL, 0, NULL, NULL } |
478 | }; | 786 | }; |
479 | 787 | ||
480 | void create_proc_ide_interfaces(void) | 788 | void ide_proc_register_port(ide_hwif_t *hwif) |
481 | { | 789 | { |
482 | int h; | 790 | if (!hwif->present) |
791 | return; | ||
483 | 792 | ||
484 | for (h = 0; h < MAX_HWIFS; h++) { | 793 | if (!hwif->proc) { |
485 | ide_hwif_t *hwif = &ide_hwifs[h]; | 794 | hwif->proc = proc_mkdir(hwif->name, proc_ide_root); |
486 | 795 | ||
487 | if (!hwif->present) | 796 | if (!hwif->proc) |
488 | continue; | 797 | return; |
489 | if (!hwif->proc) { | 798 | |
490 | hwif->proc = proc_mkdir(hwif->name, proc_ide_root); | 799 | ide_add_proc_entries(hwif->proc, hwif_entries, hwif); |
491 | if (!hwif->proc) | ||
492 | return; | ||
493 | ide_add_proc_entries(hwif->proc, hwif_entries, hwif); | ||
494 | } | ||
495 | create_proc_ide_drives(hwif); | ||
496 | } | 800 | } |
801 | |||
802 | create_proc_ide_drives(hwif); | ||
497 | } | 803 | } |
498 | 804 | ||
499 | EXPORT_SYMBOL(create_proc_ide_interfaces); | 805 | EXPORT_SYMBOL_GPL(ide_proc_register_port); |
500 | 806 | ||
501 | #ifdef CONFIG_BLK_DEV_IDEPCI | 807 | #ifdef CONFIG_BLK_DEV_IDEPCI |
502 | void ide_pci_create_host_proc(const char *name, get_info_t *get_info) | 808 | void ide_pci_create_host_proc(const char *name, get_info_t *get_info) |
@@ -507,7 +813,7 @@ void ide_pci_create_host_proc(const char *name, get_info_t *get_info) | |||
507 | EXPORT_SYMBOL_GPL(ide_pci_create_host_proc); | 813 | EXPORT_SYMBOL_GPL(ide_pci_create_host_proc); |
508 | #endif | 814 | #endif |
509 | 815 | ||
510 | void destroy_proc_ide_interface(ide_hwif_t *hwif) | 816 | void ide_proc_unregister_port(ide_hwif_t *hwif) |
511 | { | 817 | { |
512 | if (hwif->proc) { | 818 | if (hwif->proc) { |
513 | destroy_proc_ide_drives(hwif); | 819 | destroy_proc_ide_drives(hwif); |
@@ -554,11 +860,11 @@ void proc_ide_create(void) | |||
554 | { | 860 | { |
555 | struct proc_dir_entry *entry; | 861 | struct proc_dir_entry *entry; |
556 | 862 | ||
863 | proc_ide_root = proc_mkdir("ide", NULL); | ||
864 | |||
557 | if (!proc_ide_root) | 865 | if (!proc_ide_root) |
558 | return; | 866 | return; |
559 | 867 | ||
560 | create_proc_ide_interfaces(); | ||
561 | |||
562 | entry = create_proc_entry("drivers", 0, proc_ide_root); | 868 | entry = create_proc_entry("drivers", 0, proc_ide_root); |
563 | if (entry) | 869 | if (entry) |
564 | entry->proc_fops = &ide_drivers_operations; | 870 | entry->proc_fops = &ide_drivers_operations; |
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 4e59239fef75..e82bfa5e0ab8 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c | |||
@@ -4561,28 +4561,33 @@ static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive) | |||
4561 | printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size); | 4561 | printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size); |
4562 | #endif /* IDETAPE_DEBUG_INFO */ | 4562 | #endif /* IDETAPE_DEBUG_INFO */ |
4563 | } | 4563 | } |
4564 | |||
4565 | #ifdef CONFIG_IDE_PROC_FS | ||
4564 | static void idetape_add_settings (ide_drive_t *drive) | 4566 | static void idetape_add_settings (ide_drive_t *drive) |
4565 | { | 4567 | { |
4566 | idetape_tape_t *tape = drive->driver_data; | 4568 | idetape_tape_t *tape = drive->driver_data; |
4567 | 4569 | ||
4568 | /* | 4570 | /* |
4569 | * drive setting name read/write ioctl ioctl data type min max mul_factor div_factor data pointer set function | 4571 | * drive setting name read/write data type min max mul_factor div_factor data pointer set function |
4570 | */ | 4572 | */ |
4571 | ide_add_setting(drive, "buffer", SETTING_READ, -1, -1, TYPE_SHORT, 0, 0xffff, 1, 2, &tape->capabilities.buffer_size, NULL); | 4573 | ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 2, &tape->capabilities.buffer_size, NULL); |
4572 | ide_add_setting(drive, "pipeline_min", SETTING_RW, -1, -1, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); | 4574 | ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); |
4573 | ide_add_setting(drive, "pipeline", SETTING_RW, -1, -1, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_stages, NULL); | 4575 | ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_stages, NULL); |
4574 | ide_add_setting(drive, "pipeline_max", SETTING_RW, -1, -1, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); | 4576 | ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); |
4575 | ide_add_setting(drive, "pipeline_used",SETTING_READ, -1, -1, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, NULL); | 4577 | ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, NULL); |
4576 | ide_add_setting(drive, "pipeline_pending",SETTING_READ,-1, -1, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL); | 4578 | ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL); |
4577 | ide_add_setting(drive, "speed", SETTING_READ, -1, -1, TYPE_SHORT, 0, 0xffff, 1, 1, &tape->capabilities.speed, NULL); | 4579 | ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 1, &tape->capabilities.speed, NULL); |
4578 | ide_add_setting(drive, "stage", SETTING_READ, -1, -1, TYPE_INT, 0, 0xffff, 1, 1024, &tape->stage_size, NULL); | 4580 | ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1024, &tape->stage_size, NULL); |
4579 | ide_add_setting(drive, "tdsc", SETTING_RW, -1, -1, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_frequency, NULL); | 4581 | ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_frequency, NULL); |
4580 | ide_add_setting(drive, "dsc_overlap", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); | 4582 | ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); |
4581 | ide_add_setting(drive, "pipeline_head_speed_c",SETTING_READ, -1, -1, TYPE_INT, 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, NULL); | 4583 | ide_add_setting(drive, "pipeline_head_speed_c",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, NULL); |
4582 | ide_add_setting(drive, "pipeline_head_speed_u",SETTING_READ, -1, -1, TYPE_INT, 0, 0xffff, 1, 1, &tape->uncontrolled_pipeline_head_speed, NULL); | 4584 | ide_add_setting(drive, "pipeline_head_speed_u",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->uncontrolled_pipeline_head_speed,NULL); |
4583 | ide_add_setting(drive, "avg_speed", SETTING_READ, -1, -1, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL); | 4585 | ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL); |
4584 | ide_add_setting(drive, "debug_level",SETTING_RW, -1, -1, TYPE_INT, 0, 0xffff, 1, 1, &tape->debug_level, NULL); | 4586 | ide_add_setting(drive, "debug_level", SETTING_RW, TYPE_INT, 0, 0xffff, 1, 1, &tape->debug_level, NULL); |
4585 | } | 4587 | } |
4588 | #else | ||
4589 | static inline void idetape_add_settings(ide_drive_t *drive) { ; } | ||
4590 | #endif | ||
4586 | 4591 | ||
4587 | /* | 4592 | /* |
4588 | * ide_setup is called to: | 4593 | * ide_setup is called to: |
@@ -4703,7 +4708,7 @@ static void ide_tape_remove(ide_drive_t *drive) | |||
4703 | { | 4708 | { |
4704 | idetape_tape_t *tape = drive->driver_data; | 4709 | idetape_tape_t *tape = drive->driver_data; |
4705 | 4710 | ||
4706 | ide_unregister_subdriver(drive, tape->driver); | 4711 | ide_proc_unregister_driver(drive, tape->driver); |
4707 | 4712 | ||
4708 | ide_unregister_region(tape->disk); | 4713 | ide_unregister_region(tape->disk); |
4709 | 4714 | ||
@@ -4730,8 +4735,7 @@ static void ide_tape_release(struct kref *kref) | |||
4730 | kfree(tape); | 4735 | kfree(tape); |
4731 | } | 4736 | } |
4732 | 4737 | ||
4733 | #ifdef CONFIG_PROC_FS | 4738 | #ifdef CONFIG_IDE_PROC_FS |
4734 | |||
4735 | static int proc_idetape_read_name | 4739 | static int proc_idetape_read_name |
4736 | (char *page, char **start, off_t off, int count, int *eof, void *data) | 4740 | (char *page, char **start, off_t off, int count, int *eof, void *data) |
4737 | { | 4741 | { |
@@ -4749,11 +4753,6 @@ static ide_proc_entry_t idetape_proc[] = { | |||
4749 | { "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL }, | 4753 | { "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL }, |
4750 | { NULL, 0, NULL, NULL } | 4754 | { NULL, 0, NULL, NULL } |
4751 | }; | 4755 | }; |
4752 | |||
4753 | #else | ||
4754 | |||
4755 | #define idetape_proc NULL | ||
4756 | |||
4757 | #endif | 4756 | #endif |
4758 | 4757 | ||
4759 | static int ide_tape_probe(ide_drive_t *); | 4758 | static int ide_tape_probe(ide_drive_t *); |
@@ -4773,7 +4772,9 @@ static ide_driver_t idetape_driver = { | |||
4773 | .end_request = idetape_end_request, | 4772 | .end_request = idetape_end_request, |
4774 | .error = __ide_error, | 4773 | .error = __ide_error, |
4775 | .abort = __ide_abort, | 4774 | .abort = __ide_abort, |
4775 | #ifdef CONFIG_IDE_PROC_FS | ||
4776 | .proc = idetape_proc, | 4776 | .proc = idetape_proc, |
4777 | #endif | ||
4777 | }; | 4778 | }; |
4778 | 4779 | ||
4779 | /* | 4780 | /* |
@@ -4864,7 +4865,7 @@ static int ide_tape_probe(ide_drive_t *drive) | |||
4864 | 4865 | ||
4865 | ide_init_disk(g, drive); | 4866 | ide_init_disk(g, drive); |
4866 | 4867 | ||
4867 | ide_register_subdriver(drive, &idetape_driver); | 4868 | ide_proc_register_driver(drive, &idetape_driver); |
4868 | 4869 | ||
4869 | kref_init(&tape->kref); | 4870 | kref_init(&tape->kref); |
4870 | 4871 | ||
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index ae5bf2be6f52..f2b547ff7722 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c | |||
@@ -168,12 +168,11 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR, | |||
168 | 168 | ||
169 | static int idebus_parameter; /* holds the "idebus=" parameter */ | 169 | static int idebus_parameter; /* holds the "idebus=" parameter */ |
170 | static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ | 170 | static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ |
171 | static int initializing; /* set while initializing built-in drivers */ | ||
172 | 171 | ||
173 | DECLARE_MUTEX(ide_cfg_sem); | 172 | DECLARE_MUTEX(ide_cfg_sem); |
174 | __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); | 173 | __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); |
175 | 174 | ||
176 | #ifdef CONFIG_BLK_DEV_IDEPCI | 175 | #ifdef CONFIG_IDEPCI_PCIBUS_ORDER |
177 | static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */ | 176 | static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */ |
178 | #endif | 177 | #endif |
179 | 178 | ||
@@ -216,9 +215,6 @@ static void init_hwif_data(ide_hwif_t *hwif, unsigned int index) | |||
216 | hwif->bus_state = BUSSTATE_ON; | 215 | hwif->bus_state = BUSSTATE_ON; |
217 | 216 | ||
218 | hwif->atapi_dma = 0; /* disable all atapi dma */ | 217 | hwif->atapi_dma = 0; /* disable all atapi dma */ |
219 | hwif->ultra_mask = 0x80; /* disable all ultra */ | ||
220 | hwif->mwdma_mask = 0x80; /* disable all mwdma */ | ||
221 | hwif->swdma_mask = 0x80; /* disable all swdma */ | ||
222 | 218 | ||
223 | init_completion(&hwif->gendev_rel_comp); | 219 | init_completion(&hwif->gendev_rel_comp); |
224 | 220 | ||
@@ -305,9 +301,7 @@ static void __init init_ide_data (void) | |||
305 | #endif | 301 | #endif |
306 | } | 302 | } |
307 | #ifdef CONFIG_IDE_ARM | 303 | #ifdef CONFIG_IDE_ARM |
308 | initializing = 1; | ||
309 | ide_arm_init(); | 304 | ide_arm_init(); |
310 | initializing = 0; | ||
311 | #endif | 305 | #endif |
312 | } | 306 | } |
313 | 307 | ||
@@ -353,10 +347,6 @@ static int ide_system_bus_speed(void) | |||
353 | return system_bus_speed; | 347 | return system_bus_speed; |
354 | } | 348 | } |
355 | 349 | ||
356 | #ifdef CONFIG_PROC_FS | ||
357 | struct proc_dir_entry *proc_ide_root; | ||
358 | #endif | ||
359 | |||
360 | static struct resource* hwif_request_region(ide_hwif_t *hwif, | 350 | static struct resource* hwif_request_region(ide_hwif_t *hwif, |
361 | unsigned long addr, int num) | 351 | unsigned long addr, int num) |
362 | { | 352 | { |
@@ -480,6 +470,7 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) | |||
480 | 470 | ||
481 | hwif->tuneproc = tmp_hwif->tuneproc; | 471 | hwif->tuneproc = tmp_hwif->tuneproc; |
482 | hwif->speedproc = tmp_hwif->speedproc; | 472 | hwif->speedproc = tmp_hwif->speedproc; |
473 | hwif->udma_filter = tmp_hwif->udma_filter; | ||
483 | hwif->selectproc = tmp_hwif->selectproc; | 474 | hwif->selectproc = tmp_hwif->selectproc; |
484 | hwif->reset_poll = tmp_hwif->reset_poll; | 475 | hwif->reset_poll = tmp_hwif->reset_poll; |
485 | hwif->pre_reset = tmp_hwif->pre_reset; | 476 | hwif->pre_reset = tmp_hwif->pre_reset; |
@@ -599,7 +590,7 @@ void ide_unregister(unsigned int index) | |||
599 | 590 | ||
600 | spin_unlock_irq(&ide_lock); | 591 | spin_unlock_irq(&ide_lock); |
601 | 592 | ||
602 | destroy_proc_ide_interface(hwif); | 593 | ide_proc_unregister_port(hwif); |
603 | 594 | ||
604 | hwgroup = hwif->hwgroup; | 595 | hwgroup = hwif->hwgroup; |
605 | /* | 596 | /* |
@@ -751,6 +742,7 @@ void ide_setup_ports ( hw_regs_t *hw, | |||
751 | /** | 742 | /** |
752 | * ide_register_hw_with_fixup - register IDE interface | 743 | * ide_register_hw_with_fixup - register IDE interface |
753 | * @hw: hardware registers | 744 | * @hw: hardware registers |
745 | * @initializing: set while initializing built-in drivers | ||
754 | * @hwifp: pointer to returned hwif | 746 | * @hwifp: pointer to returned hwif |
755 | * @fixup: fixup function | 747 | * @fixup: fixup function |
756 | * | 748 | * |
@@ -760,7 +752,9 @@ void ide_setup_ports ( hw_regs_t *hw, | |||
760 | * Returns -1 on error. | 752 | * Returns -1 on error. |
761 | */ | 753 | */ |
762 | 754 | ||
763 | int ide_register_hw_with_fixup(hw_regs_t *hw, ide_hwif_t **hwifp, void(*fixup)(ide_hwif_t *hwif)) | 755 | int ide_register_hw_with_fixup(hw_regs_t *hw, int initializing, |
756 | ide_hwif_t **hwifp, | ||
757 | void(*fixup)(ide_hwif_t *hwif)) | ||
764 | { | 758 | { |
765 | int index, retry = 1; | 759 | int index, retry = 1; |
766 | ide_hwif_t *hwif; | 760 | ide_hwif_t *hwif; |
@@ -801,7 +795,7 @@ found: | |||
801 | 795 | ||
802 | if (!initializing) { | 796 | if (!initializing) { |
803 | probe_hwif_init_with_fixup(hwif, fixup); | 797 | probe_hwif_init_with_fixup(hwif, fixup); |
804 | create_proc_ide_interfaces(); | 798 | ide_proc_register_port(hwif); |
805 | } | 799 | } |
806 | 800 | ||
807 | if (hwifp) | 801 | if (hwifp) |
@@ -812,9 +806,9 @@ found: | |||
812 | 806 | ||
813 | EXPORT_SYMBOL(ide_register_hw_with_fixup); | 807 | EXPORT_SYMBOL(ide_register_hw_with_fixup); |
814 | 808 | ||
815 | int ide_register_hw(hw_regs_t *hw, ide_hwif_t **hwifp) | 809 | int ide_register_hw(hw_regs_t *hw, int initializing, ide_hwif_t **hwifp) |
816 | { | 810 | { |
817 | return ide_register_hw_with_fixup(hw, hwifp, NULL); | 811 | return ide_register_hw_with_fixup(hw, initializing, hwifp, NULL); |
818 | } | 812 | } |
819 | 813 | ||
820 | EXPORT_SYMBOL(ide_register_hw); | 814 | EXPORT_SYMBOL(ide_register_hw); |
@@ -825,205 +819,7 @@ EXPORT_SYMBOL(ide_register_hw); | |||
825 | 819 | ||
826 | DECLARE_MUTEX(ide_setting_sem); | 820 | DECLARE_MUTEX(ide_setting_sem); |
827 | 821 | ||
828 | /** | 822 | EXPORT_SYMBOL_GPL(ide_setting_sem); |
829 | * __ide_add_setting - add an ide setting option | ||
830 | * @drive: drive to use | ||
831 | * @name: setting name | ||
832 | * @rw: true if the function is read write | ||
833 | * @read_ioctl: function to call on read | ||
834 | * @write_ioctl: function to call on write | ||
835 | * @data_type: type of data | ||
836 | * @min: range minimum | ||
837 | * @max: range maximum | ||
838 | * @mul_factor: multiplication scale | ||
839 | * @div_factor: divison scale | ||
840 | * @data: private data field | ||
841 | * @set: setting | ||
842 | * @auto_remove: setting auto removal flag | ||
843 | * | ||
844 | * Removes the setting named from the device if it is present. | ||
845 | * The function takes the settings_lock to protect against | ||
846 | * parallel changes. This function must not be called from IRQ | ||
847 | * context. Returns 0 on success or -1 on failure. | ||
848 | * | ||
849 | * BUGS: This code is seriously over-engineered. There is also | ||
850 | * magic about how the driver specific features are setup. If | ||
851 | * a driver is attached we assume the driver settings are auto | ||
852 | * remove. | ||
853 | */ | ||
854 | |||
855 | static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove) | ||
856 | { | ||
857 | ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL; | ||
858 | |||
859 | down(&ide_setting_sem); | ||
860 | while ((*p) && strcmp((*p)->name, name) < 0) | ||
861 | p = &((*p)->next); | ||
862 | if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL) | ||
863 | goto abort; | ||
864 | if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL) | ||
865 | goto abort; | ||
866 | strcpy(setting->name, name); | ||
867 | setting->rw = rw; | ||
868 | setting->read_ioctl = read_ioctl; | ||
869 | setting->write_ioctl = write_ioctl; | ||
870 | setting->data_type = data_type; | ||
871 | setting->min = min; | ||
872 | setting->max = max; | ||
873 | setting->mul_factor = mul_factor; | ||
874 | setting->div_factor = div_factor; | ||
875 | setting->data = data; | ||
876 | setting->set = set; | ||
877 | |||
878 | setting->next = *p; | ||
879 | if (auto_remove) | ||
880 | setting->auto_remove = 1; | ||
881 | *p = setting; | ||
882 | up(&ide_setting_sem); | ||
883 | return 0; | ||
884 | abort: | ||
885 | up(&ide_setting_sem); | ||
886 | kfree(setting); | ||
887 | return -1; | ||
888 | } | ||
889 | |||
890 | int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set) | ||
891 | { | ||
892 | return __ide_add_setting(drive, name, rw, read_ioctl, write_ioctl, data_type, min, max, mul_factor, div_factor, data, set, 1); | ||
893 | } | ||
894 | |||
895 | EXPORT_SYMBOL(ide_add_setting); | ||
896 | |||
897 | /** | ||
898 | * __ide_remove_setting - remove an ide setting option | ||
899 | * @drive: drive to use | ||
900 | * @name: setting name | ||
901 | * | ||
902 | * Removes the setting named from the device if it is present. | ||
903 | * The caller must hold the setting semaphore. | ||
904 | */ | ||
905 | |||
906 | static void __ide_remove_setting (ide_drive_t *drive, char *name) | ||
907 | { | ||
908 | ide_settings_t **p, *setting; | ||
909 | |||
910 | p = (ide_settings_t **) &drive->settings; | ||
911 | |||
912 | while ((*p) && strcmp((*p)->name, name)) | ||
913 | p = &((*p)->next); | ||
914 | if ((setting = (*p)) == NULL) | ||
915 | return; | ||
916 | |||
917 | (*p) = setting->next; | ||
918 | |||
919 | kfree(setting->name); | ||
920 | kfree(setting); | ||
921 | } | ||
922 | |||
923 | /** | ||
924 | * ide_find_setting_by_ioctl - find a drive specific ioctl | ||
925 | * @drive: drive to scan | ||
926 | * @cmd: ioctl command to handle | ||
927 | * | ||
928 | * Scan's the device setting table for a matching entry and returns | ||
929 | * this or NULL if no entry is found. The caller must hold the | ||
930 | * setting semaphore | ||
931 | */ | ||
932 | |||
933 | static ide_settings_t *ide_find_setting_by_ioctl (ide_drive_t *drive, int cmd) | ||
934 | { | ||
935 | ide_settings_t *setting = drive->settings; | ||
936 | |||
937 | while (setting) { | ||
938 | if (setting->read_ioctl == cmd || setting->write_ioctl == cmd) | ||
939 | break; | ||
940 | setting = setting->next; | ||
941 | } | ||
942 | |||
943 | return setting; | ||
944 | } | ||
945 | |||
946 | /** | ||
947 | * ide_find_setting_by_name - find a drive specific setting | ||
948 | * @drive: drive to scan | ||
949 | * @name: setting name | ||
950 | * | ||
951 | * Scan's the device setting table for a matching entry and returns | ||
952 | * this or NULL if no entry is found. The caller must hold the | ||
953 | * setting semaphore | ||
954 | */ | ||
955 | |||
956 | ide_settings_t *ide_find_setting_by_name (ide_drive_t *drive, char *name) | ||
957 | { | ||
958 | ide_settings_t *setting = drive->settings; | ||
959 | |||
960 | while (setting) { | ||
961 | if (strcmp(setting->name, name) == 0) | ||
962 | break; | ||
963 | setting = setting->next; | ||
964 | } | ||
965 | return setting; | ||
966 | } | ||
967 | |||
968 | /** | ||
969 | * auto_remove_settings - remove driver specific settings | ||
970 | * @drive: drive | ||
971 | * | ||
972 | * Automatically remove all the driver specific settings for this | ||
973 | * drive. This function may not be called from IRQ context. The | ||
974 | * caller must hold ide_setting_sem. | ||
975 | */ | ||
976 | |||
977 | static void auto_remove_settings (ide_drive_t *drive) | ||
978 | { | ||
979 | ide_settings_t *setting; | ||
980 | repeat: | ||
981 | setting = drive->settings; | ||
982 | while (setting) { | ||
983 | if (setting->auto_remove) { | ||
984 | __ide_remove_setting(drive, setting->name); | ||
985 | goto repeat; | ||
986 | } | ||
987 | setting = setting->next; | ||
988 | } | ||
989 | } | ||
990 | |||
991 | /** | ||
992 | * ide_read_setting - read an IDE setting | ||
993 | * @drive: drive to read from | ||
994 | * @setting: drive setting | ||
995 | * | ||
996 | * Read a drive setting and return the value. The caller | ||
997 | * must hold the ide_setting_sem when making this call. | ||
998 | * | ||
999 | * BUGS: the data return and error are the same return value | ||
1000 | * so an error -EINVAL and true return of the same value cannot | ||
1001 | * be told apart | ||
1002 | */ | ||
1003 | |||
1004 | int ide_read_setting (ide_drive_t *drive, ide_settings_t *setting) | ||
1005 | { | ||
1006 | int val = -EINVAL; | ||
1007 | unsigned long flags; | ||
1008 | |||
1009 | if ((setting->rw & SETTING_READ)) { | ||
1010 | spin_lock_irqsave(&ide_lock, flags); | ||
1011 | switch(setting->data_type) { | ||
1012 | case TYPE_BYTE: | ||
1013 | val = *((u8 *) setting->data); | ||
1014 | break; | ||
1015 | case TYPE_SHORT: | ||
1016 | val = *((u16 *) setting->data); | ||
1017 | break; | ||
1018 | case TYPE_INT: | ||
1019 | case TYPE_INTA: | ||
1020 | val = *((u32 *) setting->data); | ||
1021 | break; | ||
1022 | } | ||
1023 | spin_unlock_irqrestore(&ide_lock, flags); | ||
1024 | } | ||
1025 | return val; | ||
1026 | } | ||
1027 | 823 | ||
1028 | /** | 824 | /** |
1029 | * ide_spin_wait_hwgroup - wait for group | 825 | * ide_spin_wait_hwgroup - wait for group |
@@ -1058,61 +854,14 @@ int ide_spin_wait_hwgroup (ide_drive_t *drive) | |||
1058 | 854 | ||
1059 | EXPORT_SYMBOL(ide_spin_wait_hwgroup); | 855 | EXPORT_SYMBOL(ide_spin_wait_hwgroup); |
1060 | 856 | ||
1061 | /** | 857 | int set_io_32bit(ide_drive_t *drive, int arg) |
1062 | * ide_write_setting - read an IDE setting | ||
1063 | * @drive: drive to read from | ||
1064 | * @setting: drive setting | ||
1065 | * @val: value | ||
1066 | * | ||
1067 | * Write a drive setting if it is possible. The caller | ||
1068 | * must hold the ide_setting_sem when making this call. | ||
1069 | * | ||
1070 | * BUGS: the data return and error are the same return value | ||
1071 | * so an error -EINVAL and true return of the same value cannot | ||
1072 | * be told apart | ||
1073 | * | ||
1074 | * FIXME: This should be changed to enqueue a special request | ||
1075 | * to the driver to change settings, and then wait on a sema for completion. | ||
1076 | * The current scheme of polling is kludgy, though safe enough. | ||
1077 | */ | ||
1078 | |||
1079 | int ide_write_setting (ide_drive_t *drive, ide_settings_t *setting, int val) | ||
1080 | { | 858 | { |
1081 | int i; | 859 | if (drive->no_io_32bit) |
1082 | u32 *p; | ||
1083 | |||
1084 | if (!capable(CAP_SYS_ADMIN)) | ||
1085 | return -EACCES; | ||
1086 | if (!(setting->rw & SETTING_WRITE)) | ||
1087 | return -EPERM; | 860 | return -EPERM; |
1088 | if (val < setting->min || val > setting->max) | 861 | |
862 | if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1)) | ||
1089 | return -EINVAL; | 863 | return -EINVAL; |
1090 | if (setting->set) | ||
1091 | return setting->set(drive, val); | ||
1092 | if (ide_spin_wait_hwgroup(drive)) | ||
1093 | return -EBUSY; | ||
1094 | switch (setting->data_type) { | ||
1095 | case TYPE_BYTE: | ||
1096 | *((u8 *) setting->data) = val; | ||
1097 | break; | ||
1098 | case TYPE_SHORT: | ||
1099 | *((u16 *) setting->data) = val; | ||
1100 | break; | ||
1101 | case TYPE_INT: | ||
1102 | *((u32 *) setting->data) = val; | ||
1103 | break; | ||
1104 | case TYPE_INTA: | ||
1105 | p = (u32 *) setting->data; | ||
1106 | for (i = 0; i < 1 << PARTN_BITS; i++, p++) | ||
1107 | *p = val; | ||
1108 | break; | ||
1109 | } | ||
1110 | spin_unlock_irq(&ide_lock); | ||
1111 | return 0; | ||
1112 | } | ||
1113 | 864 | ||
1114 | static int set_io_32bit(ide_drive_t *drive, int arg) | ||
1115 | { | ||
1116 | drive->io_32bit = arg; | 865 | drive->io_32bit = arg; |
1117 | #ifdef CONFIG_BLK_DEV_DTC2278 | 866 | #ifdef CONFIG_BLK_DEV_DTC2278 |
1118 | if (HWIF(drive)->chipset == ide_dtc2278) | 867 | if (HWIF(drive)->chipset == ide_dtc2278) |
@@ -1121,12 +870,28 @@ static int set_io_32bit(ide_drive_t *drive, int arg) | |||
1121 | return 0; | 870 | return 0; |
1122 | } | 871 | } |
1123 | 872 | ||
1124 | static int set_using_dma (ide_drive_t *drive, int arg) | 873 | static int set_ksettings(ide_drive_t *drive, int arg) |
874 | { | ||
875 | if (arg < 0 || arg > 1) | ||
876 | return -EINVAL; | ||
877 | |||
878 | if (ide_spin_wait_hwgroup(drive)) | ||
879 | return -EBUSY; | ||
880 | drive->keep_settings = arg; | ||
881 | spin_unlock_irq(&ide_lock); | ||
882 | |||
883 | return 0; | ||
884 | } | ||
885 | |||
886 | int set_using_dma(ide_drive_t *drive, int arg) | ||
1125 | { | 887 | { |
1126 | #ifdef CONFIG_BLK_DEV_IDEDMA | 888 | #ifdef CONFIG_BLK_DEV_IDEDMA |
1127 | ide_hwif_t *hwif = drive->hwif; | 889 | ide_hwif_t *hwif = drive->hwif; |
1128 | int err = -EPERM; | 890 | int err = -EPERM; |
1129 | 891 | ||
892 | if (arg < 0 || arg > 1) | ||
893 | return -EINVAL; | ||
894 | |||
1130 | if (!drive->id || !(drive->id->capability & 1)) | 895 | if (!drive->id || !(drive->id->capability & 1)) |
1131 | goto out; | 896 | goto out; |
1132 | 897 | ||
@@ -1159,14 +924,20 @@ static int set_using_dma (ide_drive_t *drive, int arg) | |||
1159 | out: | 924 | out: |
1160 | return err; | 925 | return err; |
1161 | #else | 926 | #else |
927 | if (arg < 0 || arg > 1) | ||
928 | return -EINVAL; | ||
929 | |||
1162 | return -EPERM; | 930 | return -EPERM; |
1163 | #endif | 931 | #endif |
1164 | } | 932 | } |
1165 | 933 | ||
1166 | static int set_pio_mode (ide_drive_t *drive, int arg) | 934 | int set_pio_mode(ide_drive_t *drive, int arg) |
1167 | { | 935 | { |
1168 | struct request rq; | 936 | struct request rq; |
1169 | 937 | ||
938 | if (arg < 0 || arg > 255) | ||
939 | return -EINVAL; | ||
940 | |||
1170 | if (!HWIF(drive)->tuneproc) | 941 | if (!HWIF(drive)->tuneproc) |
1171 | return -ENOSYS; | 942 | return -ENOSYS; |
1172 | if (drive->special.b.set_tune) | 943 | if (drive->special.b.set_tune) |
@@ -1178,42 +949,20 @@ static int set_pio_mode (ide_drive_t *drive, int arg) | |||
1178 | return 0; | 949 | return 0; |
1179 | } | 950 | } |
1180 | 951 | ||
1181 | static int set_xfer_rate (ide_drive_t *drive, int arg) | 952 | static int set_unmaskirq(ide_drive_t *drive, int arg) |
1182 | { | 953 | { |
1183 | int err = ide_wait_cmd(drive, | 954 | if (drive->no_unmask) |
1184 | WIN_SETFEATURES, (u8) arg, | 955 | return -EPERM; |
1185 | SETFEATURES_XFER, 0, NULL); | ||
1186 | 956 | ||
1187 | if (!err && arg) { | 957 | if (arg < 0 || arg > 1) |
1188 | ide_set_xfer_rate(drive, (u8) arg); | 958 | return -EINVAL; |
1189 | ide_driveid_update(drive); | ||
1190 | } | ||
1191 | return err; | ||
1192 | } | ||
1193 | 959 | ||
1194 | /** | 960 | if (ide_spin_wait_hwgroup(drive)) |
1195 | * ide_add_generic_settings - generic ide settings | 961 | return -EBUSY; |
1196 | * @drive: drive being configured | 962 | drive->unmask = arg; |
1197 | * | 963 | spin_unlock_irq(&ide_lock); |
1198 | * Add the generic parts of the system settings to the /proc files and | ||
1199 | * ioctls for this IDE device. The caller must not be holding the | ||
1200 | * ide_setting_sem. | ||
1201 | */ | ||
1202 | 964 | ||
1203 | void ide_add_generic_settings (ide_drive_t *drive) | 965 | return 0; |
1204 | { | ||
1205 | /* | ||
1206 | * drive setting name read/write access read ioctl write ioctl data type min max mul_factor div_factor data pointer set function | ||
1207 | */ | ||
1208 | __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, HDIO_GET_32BIT, HDIO_SET_32BIT, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0); | ||
1209 | __ide_add_setting(drive, "keepsettings", SETTING_RW, HDIO_GET_KEEPSETTINGS, HDIO_SET_KEEPSETTINGS, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0); | ||
1210 | __ide_add_setting(drive, "nice1", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0); | ||
1211 | __ide_add_setting(drive, "pio_mode", SETTING_WRITE, -1, HDIO_SET_PIO_MODE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0); | ||
1212 | __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, HDIO_GET_UNMASKINTR, HDIO_SET_UNMASKINTR, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0); | ||
1213 | __ide_add_setting(drive, "using_dma", SETTING_RW, HDIO_GET_DMA, HDIO_SET_DMA, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0); | ||
1214 | __ide_add_setting(drive, "init_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0); | ||
1215 | __ide_add_setting(drive, "current_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0); | ||
1216 | __ide_add_setting(drive, "number", SETTING_RW, -1, -1, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0); | ||
1217 | } | 966 | } |
1218 | 967 | ||
1219 | /** | 968 | /** |
@@ -1285,27 +1034,23 @@ static int generic_ide_resume(struct device *dev) | |||
1285 | int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, | 1034 | int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, |
1286 | unsigned int cmd, unsigned long arg) | 1035 | unsigned int cmd, unsigned long arg) |
1287 | { | 1036 | { |
1288 | ide_settings_t *setting; | 1037 | unsigned long flags; |
1289 | ide_driver_t *drv; | 1038 | ide_driver_t *drv; |
1290 | int err = 0; | ||
1291 | void __user *p = (void __user *)arg; | 1039 | void __user *p = (void __user *)arg; |
1040 | int err = 0, (*setfunc)(ide_drive_t *, int); | ||
1041 | u8 *val; | ||
1292 | 1042 | ||
1293 | down(&ide_setting_sem); | 1043 | switch (cmd) { |
1294 | if ((setting = ide_find_setting_by_ioctl(drive, cmd)) != NULL) { | 1044 | case HDIO_GET_32BIT: val = &drive->io_32bit; goto read_val; |
1295 | if (cmd == setting->read_ioctl) { | 1045 | case HDIO_GET_KEEPSETTINGS: val = &drive->keep_settings; goto read_val; |
1296 | err = ide_read_setting(drive, setting); | 1046 | case HDIO_GET_UNMASKINTR: val = &drive->unmask; goto read_val; |
1297 | up(&ide_setting_sem); | 1047 | case HDIO_GET_DMA: val = &drive->using_dma; goto read_val; |
1298 | return err >= 0 ? put_user(err, (long __user *)arg) : err; | 1048 | case HDIO_SET_32BIT: setfunc = set_io_32bit; goto set_val; |
1299 | } else { | 1049 | case HDIO_SET_KEEPSETTINGS: setfunc = set_ksettings; goto set_val; |
1300 | if (bdev != bdev->bd_contains) | 1050 | case HDIO_SET_PIO_MODE: setfunc = set_pio_mode; goto set_val; |
1301 | err = -EINVAL; | 1051 | case HDIO_SET_UNMASKINTR: setfunc = set_unmaskirq; goto set_val; |
1302 | else | 1052 | case HDIO_SET_DMA: setfunc = set_using_dma; goto set_val; |
1303 | err = ide_write_setting(drive, setting, arg); | ||
1304 | up(&ide_setting_sem); | ||
1305 | return err; | ||
1306 | } | ||
1307 | } | 1053 | } |
1308 | up(&ide_setting_sem); | ||
1309 | 1054 | ||
1310 | switch (cmd) { | 1055 | switch (cmd) { |
1311 | case HDIO_OBSOLETE_IDENTITY: | 1056 | case HDIO_OBSOLETE_IDENTITY: |
@@ -1359,7 +1104,7 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device | |||
1359 | ide_init_hwif_ports(&hw, (unsigned long) args[0], | 1104 | ide_init_hwif_ports(&hw, (unsigned long) args[0], |
1360 | (unsigned long) args[1], NULL); | 1105 | (unsigned long) args[1], NULL); |
1361 | hw.irq = args[2]; | 1106 | hw.irq = args[2]; |
1362 | if (ide_register_hw(&hw, NULL) == -1) | 1107 | if (ide_register_hw(&hw, 0, NULL) == -1) |
1363 | return -EIO; | 1108 | return -EIO; |
1364 | return 0; | 1109 | return 0; |
1365 | } | 1110 | } |
@@ -1434,6 +1179,28 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device | |||
1434 | default: | 1179 | default: |
1435 | return -EINVAL; | 1180 | return -EINVAL; |
1436 | } | 1181 | } |
1182 | |||
1183 | read_val: | ||
1184 | down(&ide_setting_sem); | ||
1185 | spin_lock_irqsave(&ide_lock, flags); | ||
1186 | err = *val; | ||
1187 | spin_unlock_irqrestore(&ide_lock, flags); | ||
1188 | up(&ide_setting_sem); | ||
1189 | return err >= 0 ? put_user(err, (long __user *)arg) : err; | ||
1190 | |||
1191 | set_val: | ||
1192 | if (bdev != bdev->bd_contains) | ||
1193 | err = -EINVAL; | ||
1194 | else { | ||
1195 | if (!capable(CAP_SYS_ADMIN)) | ||
1196 | err = -EACCES; | ||
1197 | else { | ||
1198 | down(&ide_setting_sem); | ||
1199 | err = setfunc(drive, arg); | ||
1200 | up(&ide_setting_sem); | ||
1201 | } | ||
1202 | } | ||
1203 | return err; | ||
1437 | } | 1204 | } |
1438 | 1205 | ||
1439 | EXPORT_SYMBOL(generic_ide_ioctl); | 1206 | EXPORT_SYMBOL(generic_ide_ioctl); |
@@ -1566,13 +1333,13 @@ static int __init ide_setup(char *s) | |||
1566 | return 1; | 1333 | return 1; |
1567 | } | 1334 | } |
1568 | 1335 | ||
1569 | #ifdef CONFIG_BLK_DEV_IDEPCI | 1336 | #ifdef CONFIG_IDEPCI_PCIBUS_ORDER |
1570 | if (!strcmp(s, "ide=reverse")) { | 1337 | if (!strcmp(s, "ide=reverse")) { |
1571 | ide_scan_direction = 1; | 1338 | ide_scan_direction = 1; |
1572 | printk(" : Enabled support for IDE inverse scan order.\n"); | 1339 | printk(" : Enabled support for IDE inverse scan order.\n"); |
1573 | return 1; | 1340 | return 1; |
1574 | } | 1341 | } |
1575 | #endif /* CONFIG_BLK_DEV_IDEPCI */ | 1342 | #endif |
1576 | 1343 | ||
1577 | #ifdef CONFIG_BLK_DEV_IDEACPI | 1344 | #ifdef CONFIG_BLK_DEV_IDEACPI |
1578 | if (!strcmp(s, "ide=noacpi")) { | 1345 | if (!strcmp(s, "ide=noacpi")) { |
@@ -1832,9 +1599,9 @@ extern void __init h8300_ide_init(void); | |||
1832 | */ | 1599 | */ |
1833 | static void __init probe_for_hwifs (void) | 1600 | static void __init probe_for_hwifs (void) |
1834 | { | 1601 | { |
1835 | #ifdef CONFIG_BLK_DEV_IDEPCI | 1602 | #ifdef CONFIG_IDEPCI_PCIBUS_ORDER |
1836 | ide_scan_pcibus(ide_scan_direction); | 1603 | ide_scan_pcibus(ide_scan_direction); |
1837 | #endif /* CONFIG_BLK_DEV_IDEPCI */ | 1604 | #endif |
1838 | 1605 | ||
1839 | #ifdef CONFIG_ETRAX_IDE | 1606 | #ifdef CONFIG_ETRAX_IDE |
1840 | { | 1607 | { |
@@ -1892,54 +1659,6 @@ static void __init probe_for_hwifs (void) | |||
1892 | #endif | 1659 | #endif |
1893 | } | 1660 | } |
1894 | 1661 | ||
1895 | void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver) | ||
1896 | { | ||
1897 | #ifdef CONFIG_PROC_FS | ||
1898 | ide_add_proc_entries(drive->proc, driver->proc, drive); | ||
1899 | #endif | ||
1900 | } | ||
1901 | |||
1902 | EXPORT_SYMBOL(ide_register_subdriver); | ||
1903 | |||
1904 | /** | ||
1905 | * ide_unregister_subdriver - disconnect drive from driver | ||
1906 | * @drive: drive to unplug | ||
1907 | * @driver: driver | ||
1908 | * | ||
1909 | * Disconnect a drive from the driver it was attached to and then | ||
1910 | * clean up the various proc files and other objects attached to it. | ||
1911 | * | ||
1912 | * Takes ide_setting_sem and ide_lock. | ||
1913 | * Caller must hold none of the locks. | ||
1914 | */ | ||
1915 | |||
1916 | void ide_unregister_subdriver(ide_drive_t *drive, ide_driver_t *driver) | ||
1917 | { | ||
1918 | unsigned long flags; | ||
1919 | |||
1920 | #ifdef CONFIG_PROC_FS | ||
1921 | ide_remove_proc_entries(drive->proc, driver->proc); | ||
1922 | #endif | ||
1923 | down(&ide_setting_sem); | ||
1924 | spin_lock_irqsave(&ide_lock, flags); | ||
1925 | /* | ||
1926 | * ide_setting_sem protects the settings list | ||
1927 | * ide_lock protects the use of settings | ||
1928 | * | ||
1929 | * so we need to hold both, ide_settings_sem because we want to | ||
1930 | * modify the settings list, and ide_lock because we cannot take | ||
1931 | * a setting out that is being used. | ||
1932 | * | ||
1933 | * OTOH both ide_{read,write}_setting are only ever used under | ||
1934 | * ide_setting_sem. | ||
1935 | */ | ||
1936 | auto_remove_settings(drive); | ||
1937 | spin_unlock_irqrestore(&ide_lock, flags); | ||
1938 | up(&ide_setting_sem); | ||
1939 | } | ||
1940 | |||
1941 | EXPORT_SYMBOL(ide_unregister_subdriver); | ||
1942 | |||
1943 | /* | 1662 | /* |
1944 | * Probe module | 1663 | * Probe module |
1945 | */ | 1664 | */ |
@@ -2071,9 +1790,7 @@ static int __init ide_init(void) | |||
2071 | 1790 | ||
2072 | init_ide_data(); | 1791 | init_ide_data(); |
2073 | 1792 | ||
2074 | #ifdef CONFIG_PROC_FS | 1793 | proc_ide_create(); |
2075 | proc_ide_root = proc_mkdir("ide", NULL); | ||
2076 | #endif | ||
2077 | 1794 | ||
2078 | #ifdef CONFIG_BLK_DEV_ALI14XX | 1795 | #ifdef CONFIG_BLK_DEV_ALI14XX |
2079 | if (probe_ali14xx) | 1796 | if (probe_ali14xx) |
@@ -2096,14 +1813,9 @@ static int __init ide_init(void) | |||
2096 | (void)qd65xx_init(); | 1813 | (void)qd65xx_init(); |
2097 | #endif | 1814 | #endif |
2098 | 1815 | ||
2099 | initializing = 1; | ||
2100 | /* Probe for special PCI and other "known" interface chipsets. */ | 1816 | /* Probe for special PCI and other "known" interface chipsets. */ |
2101 | probe_for_hwifs(); | 1817 | probe_for_hwifs(); |
2102 | initializing = 0; | ||
2103 | 1818 | ||
2104 | #ifdef CONFIG_PROC_FS | ||
2105 | proc_ide_create(); | ||
2106 | #endif | ||
2107 | return 0; | 1819 | return 0; |
2108 | } | 1820 | } |
2109 | 1821 | ||
@@ -2143,9 +1855,7 @@ void __exit cleanup_module (void) | |||
2143 | pnpide_exit(); | 1855 | pnpide_exit(); |
2144 | #endif | 1856 | #endif |
2145 | 1857 | ||
2146 | #ifdef CONFIG_PROC_FS | ||
2147 | proc_ide_destroy(); | 1858 | proc_ide_destroy(); |
2148 | #endif | ||
2149 | 1859 | ||
2150 | bus_unregister(&ide_bus_type); | 1860 | bus_unregister(&ide_bus_type); |
2151 | } | 1861 | } |
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 91961aa03047..df17ed68c0bc 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c | |||
@@ -223,7 +223,8 @@ static int __init ali14xx_probe(void) | |||
223 | probe_hwif_init(hwif); | 223 | probe_hwif_init(hwif); |
224 | probe_hwif_init(mate); | 224 | probe_hwif_init(mate); |
225 | 225 | ||
226 | create_proc_ide_interfaces(); | 226 | ide_proc_register_port(hwif); |
227 | ide_proc_register_port(mate); | ||
227 | 228 | ||
228 | return 0; | 229 | return 0; |
229 | } | 230 | } |
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 1ed224a01f79..101aee1711c4 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c | |||
@@ -213,7 +213,7 @@ fail_base2: | |||
213 | IRQ_AMIGA_PORTS); | 213 | IRQ_AMIGA_PORTS); |
214 | } | 214 | } |
215 | 215 | ||
216 | index = ide_register_hw(&hw, &hwif); | 216 | index = ide_register_hw(&hw, 1, &hwif); |
217 | if (index != -1) { | 217 | if (index != -1) { |
218 | hwif->mmio = 1; | 218 | hwif->mmio = 1; |
219 | printk("ide%d: ", index); | 219 | printk("ide%d: ", index); |
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index 0219ffa64db6..36a3f0ac6162 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c | |||
@@ -138,7 +138,8 @@ static int __init dtc2278_probe(void) | |||
138 | probe_hwif_init(hwif); | 138 | probe_hwif_init(hwif); |
139 | probe_hwif_init(mate); | 139 | probe_hwif_init(mate); |
140 | 140 | ||
141 | create_proc_ide_interfaces(); | 141 | ide_proc_register_port(hwif); |
142 | ide_proc_register_port(mate); | ||
142 | 143 | ||
143 | return 0; | 144 | return 0; |
144 | } | 145 | } |
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index a9f2cd5bb81e..e1e9d9d6893f 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c | |||
@@ -70,7 +70,7 @@ void __init falconide_init(void) | |||
70 | 0, 0, NULL, | 70 | 0, 0, NULL, |
71 | // falconide_iops, | 71 | // falconide_iops, |
72 | IRQ_MFP_IDE); | 72 | IRQ_MFP_IDE); |
73 | index = ide_register_hw(&hw, NULL); | 73 | index = ide_register_hw(&hw, 1, NULL); |
74 | 74 | ||
75 | if (index != -1) | 75 | if (index != -1) |
76 | printk("ide%d: Falcon IDE interface\n", index); | 76 | printk("ide%d: Falcon IDE interface\n", index); |
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index dcfadbbf55d8..0830a021bbb6 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c | |||
@@ -165,7 +165,7 @@ found: | |||
165 | // &gayle_iops, | 165 | // &gayle_iops, |
166 | IRQ_AMIGA_PORTS); | 166 | IRQ_AMIGA_PORTS); |
167 | 167 | ||
168 | index = ide_register_hw(&hw, &hwif); | 168 | index = ide_register_hw(&hw, 1, &hwif); |
169 | if (index != -1) { | 169 | if (index != -1) { |
170 | hwif->mmio = 1; | 170 | hwif->mmio = 1; |
171 | switch (i) { | 171 | switch (i) { |
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index a2832643c522..c8f353b1296f 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c | |||
@@ -357,7 +357,8 @@ int __init ht6560b_init(void) | |||
357 | probe_hwif_init(hwif); | 357 | probe_hwif_init(hwif); |
358 | probe_hwif_init(mate); | 358 | probe_hwif_init(mate); |
359 | 359 | ||
360 | create_proc_ide_interfaces(); | 360 | ide_proc_register_port(hwif); |
361 | ide_proc_register_port(mate); | ||
361 | 362 | ||
362 | return 0; | 363 | return 0; |
363 | 364 | ||
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index c6522a64d7ec..2f3977f195b7 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c | |||
@@ -153,7 +153,7 @@ static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq | |||
153 | hw.irq = irq; | 153 | hw.irq = irq; |
154 | hw.chipset = ide_pci; | 154 | hw.chipset = ide_pci; |
155 | hw.dev = &handle->dev; | 155 | hw.dev = &handle->dev; |
156 | return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave); | 156 | return ide_register_hw_with_fixup(&hw, 0, NULL, ide_undecoded_slave); |
157 | } | 157 | } |
158 | 158 | ||
159 | /*====================================================================== | 159 | /*====================================================================== |
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 4c0079ad52ac..c211fc78345d 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c | |||
@@ -102,21 +102,21 @@ void macide_init(void) | |||
102 | 0, 0, macide_ack_intr, | 102 | 0, 0, macide_ack_intr, |
103 | // quadra_ide_iops, | 103 | // quadra_ide_iops, |
104 | IRQ_NUBUS_F); | 104 | IRQ_NUBUS_F); |
105 | index = ide_register_hw(&hw, &hwif); | 105 | index = ide_register_hw(&hw, 1, &hwif); |
106 | break; | 106 | break; |
107 | case MAC_IDE_PB: | 107 | case MAC_IDE_PB: |
108 | ide_setup_ports(&hw, IDE_BASE, macide_offsets, | 108 | ide_setup_ports(&hw, IDE_BASE, macide_offsets, |
109 | 0, 0, macide_ack_intr, | 109 | 0, 0, macide_ack_intr, |
110 | // macide_pb_iops, | 110 | // macide_pb_iops, |
111 | IRQ_NUBUS_C); | 111 | IRQ_NUBUS_C); |
112 | index = ide_register_hw(&hw, &hwif); | 112 | index = ide_register_hw(&hw, 1, &hwif); |
113 | break; | 113 | break; |
114 | case MAC_IDE_BABOON: | 114 | case MAC_IDE_BABOON: |
115 | ide_setup_ports(&hw, BABOON_BASE, macide_offsets, | 115 | ide_setup_ports(&hw, BABOON_BASE, macide_offsets, |
116 | 0, 0, NULL, | 116 | 0, 0, NULL, |
117 | // macide_baboon_iops, | 117 | // macide_baboon_iops, |
118 | IRQ_BABOON_1); | 118 | IRQ_BABOON_1); |
119 | index = ide_register_hw(&hw, &hwif); | 119 | index = ide_register_hw(&hw, 1, &hwif); |
120 | if (index == -1) break; | 120 | if (index == -1) break; |
121 | if (macintosh_config->ident == MAC_MODEL_PB190) { | 121 | if (macintosh_config->ident == MAC_MODEL_PB190) { |
122 | 122 | ||
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 74f08124eabb..e628a983ce33 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c | |||
@@ -142,7 +142,7 @@ void q40ide_init(void) | |||
142 | 0, NULL, | 142 | 0, NULL, |
143 | // m68kide_iops, | 143 | // m68kide_iops, |
144 | q40ide_default_irq(pcide_bases[i])); | 144 | q40ide_default_irq(pcide_bases[i])); |
145 | index = ide_register_hw(&hw, &hwif); | 145 | index = ide_register_hw(&hw, 1, &hwif); |
146 | // **FIXME** | 146 | // **FIXME** |
147 | if (index != -1) | 147 | if (index != -1) |
148 | hwif->mmio = 1; | 148 | hwif->mmio = 1; |
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 2fb8f50f1293..d1414a75b523 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c | |||
@@ -427,7 +427,7 @@ static int __init qd_probe(int base) | |||
427 | qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA, | 427 | qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA, |
428 | &qd6500_tune_drive); | 428 | &qd6500_tune_drive); |
429 | 429 | ||
430 | create_proc_ide_interfaces(); | 430 | ide_proc_register_port(hwif); |
431 | 431 | ||
432 | return 1; | 432 | return 1; |
433 | } | 433 | } |
@@ -459,7 +459,7 @@ static int __init qd_probe(int base) | |||
459 | &qd6580_tune_drive); | 459 | &qd6580_tune_drive); |
460 | qd_write_reg(QD_DEF_CONTR,QD_CONTROL_PORT); | 460 | qd_write_reg(QD_DEF_CONTR,QD_CONTROL_PORT); |
461 | 461 | ||
462 | create_proc_ide_interfaces(); | 462 | ide_proc_register_port(hwif); |
463 | 463 | ||
464 | return 1; | 464 | return 1; |
465 | } else { | 465 | } else { |
@@ -479,7 +479,8 @@ static int __init qd_probe(int base) | |||
479 | &qd6580_tune_drive); | 479 | &qd6580_tune_drive); |
480 | qd_write_reg(QD_DEF_CONTR,QD_CONTROL_PORT); | 480 | qd_write_reg(QD_DEF_CONTR,QD_CONTROL_PORT); |
481 | 481 | ||
482 | create_proc_ide_interfaces(); | 482 | ide_proc_register_port(hwif); |
483 | ide_proc_register_port(mate); | ||
483 | 484 | ||
484 | return 0; /* no other qd65xx possible */ | 485 | return 0; /* no other qd65xx possible */ |
485 | } | 486 | } |
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index ca7974455578..ddc403a0bd82 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c | |||
@@ -160,7 +160,8 @@ static int __init umc8672_probe(void) | |||
160 | probe_hwif_init(hwif); | 160 | probe_hwif_init(hwif); |
161 | probe_hwif_init(mate); | 161 | probe_hwif_init(mate); |
162 | 162 | ||
163 | create_proc_ide_interfaces(); | 163 | ide_proc_register_port(hwif); |
164 | ide_proc_register_port(mate); | ||
164 | 165 | ||
165 | return 0; | 166 | return 0; |
166 | } | 167 | } |
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index d54d9fe92a7d..ca95e990862e 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c | |||
@@ -760,6 +760,9 @@ static int au_ide_probe(struct device *dev) | |||
760 | #endif | 760 | #endif |
761 | 761 | ||
762 | probe_hwif_init(hwif); | 762 | probe_hwif_init(hwif); |
763 | |||
764 | ide_proc_register_port(hwif); | ||
765 | |||
763 | dev_set_drvdata(dev, hwif); | 766 | dev_set_drvdata(dev, hwif); |
764 | 767 | ||
765 | printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); | 768 | printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); |
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 81fa06851b27..6e935d7c63fd 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c | |||
@@ -129,6 +129,9 @@ static int __devinit swarm_ide_probe(struct device *dev) | |||
129 | hwif->irq = hwif->hw.irq; | 129 | hwif->irq = hwif->hw.irq; |
130 | 130 | ||
131 | probe_hwif_init(hwif); | 131 | probe_hwif_init(hwif); |
132 | |||
133 | ide_proc_register_port(hwif); | ||
134 | |||
132 | dev_set_drvdata(dev, hwif); | 135 | dev_set_drvdata(dev, hwif); |
133 | 136 | ||
134 | return 0; | 137 | return 0; |
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 73bdf64dbbfc..b173bc66ce1e 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c | |||
@@ -87,38 +87,12 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr | |||
87 | return chipset_table->ultra_settings; | 87 | return chipset_table->ultra_settings; |
88 | } | 88 | } |
89 | 89 | ||
90 | static u8 aec62xx_ratemask (ide_drive_t *drive) | ||
91 | { | ||
92 | ide_hwif_t *hwif = HWIF(drive); | ||
93 | u8 mode; | ||
94 | |||
95 | switch(hwif->pci_dev->device) { | ||
96 | case PCI_DEVICE_ID_ARTOP_ATP865: | ||
97 | case PCI_DEVICE_ID_ARTOP_ATP865R: | ||
98 | mode = (inb(hwif->channel ? | ||
99 | hwif->mate->dma_status : | ||
100 | hwif->dma_status) & 0x10) ? 4 : 3; | ||
101 | break; | ||
102 | case PCI_DEVICE_ID_ARTOP_ATP860: | ||
103 | case PCI_DEVICE_ID_ARTOP_ATP860R: | ||
104 | mode = 2; | ||
105 | break; | ||
106 | case PCI_DEVICE_ID_ARTOP_ATP850UF: | ||
107 | default: | ||
108 | return 1; | ||
109 | } | ||
110 | |||
111 | if (!eighty_ninty_three(drive)) | ||
112 | mode = min(mode, (u8)1); | ||
113 | return mode; | ||
114 | } | ||
115 | |||
116 | static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed) | 90 | static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
117 | { | 91 | { |
118 | ide_hwif_t *hwif = HWIF(drive); | 92 | ide_hwif_t *hwif = HWIF(drive); |
119 | struct pci_dev *dev = hwif->pci_dev; | 93 | struct pci_dev *dev = hwif->pci_dev; |
120 | u16 d_conf = 0; | 94 | u16 d_conf = 0; |
121 | u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); | 95 | u8 speed = ide_rate_filter(drive, xferspeed); |
122 | u8 ultra = 0, ultra_conf = 0; | 96 | u8 ultra = 0, ultra_conf = 0; |
123 | u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; | 97 | u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; |
124 | unsigned long flags; | 98 | unsigned long flags; |
@@ -145,7 +119,7 @@ static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
145 | { | 119 | { |
146 | ide_hwif_t *hwif = HWIF(drive); | 120 | ide_hwif_t *hwif = HWIF(drive); |
147 | struct pci_dev *dev = hwif->pci_dev; | 121 | struct pci_dev *dev = hwif->pci_dev; |
148 | u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); | 122 | u8 speed = ide_rate_filter(drive, xferspeed); |
149 | u8 unit = (drive->select.b.unit & 0x01); | 123 | u8 unit = (drive->select.b.unit & 0x01); |
150 | u8 tmp1 = 0, tmp2 = 0; | 124 | u8 tmp1 = 0, tmp2 = 0; |
151 | u8 ultra = 0, drive_conf = 0, ultra_conf = 0; | 125 | u8 ultra = 0, drive_conf = 0, ultra_conf = 0; |
@@ -181,17 +155,6 @@ static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed) | |||
181 | } | 155 | } |
182 | } | 156 | } |
183 | 157 | ||
184 | static int config_chipset_for_dma (ide_drive_t *drive) | ||
185 | { | ||
186 | u8 speed = ide_dma_speed(drive, aec62xx_ratemask(drive)); | ||
187 | |||
188 | if (!(speed)) | ||
189 | return 0; | ||
190 | |||
191 | (void) aec62xx_tune_chipset(drive, speed); | ||
192 | return ide_dma_enable(drive); | ||
193 | } | ||
194 | |||
195 | static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio) | 158 | static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio) |
196 | { | 159 | { |
197 | pio = ide_get_best_pio_mode(drive, pio, 4, NULL); | 160 | pio = ide_get_best_pio_mode(drive, pio, 4, NULL); |
@@ -200,7 +163,7 @@ static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio) | |||
200 | 163 | ||
201 | static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive) | 164 | static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive) |
202 | { | 165 | { |
203 | if (ide_use_dma(drive) && config_chipset_for_dma(drive)) | 166 | if (ide_tune_dma(drive)) |
204 | return 0; | 167 | return 0; |
205 | 168 | ||
206 | if (ide_use_fast_pio(drive)) | 169 | if (ide_use_fast_pio(drive)) |
@@ -261,11 +224,13 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch | |||
261 | 224 | ||
262 | static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) | 225 | static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) |
263 | { | 226 | { |
227 | struct pci_dev *dev = hwif->pci_dev; | ||
228 | |||
264 | hwif->autodma = 0; | 229 | hwif->autodma = 0; |
265 | hwif->tuneproc = &aec62xx_tune_drive; | 230 | hwif->tuneproc = &aec62xx_tune_drive; |
266 | hwif->speedproc = &aec62xx_tune_chipset; | 231 | hwif->speedproc = &aec62xx_tune_chipset; |
267 | 232 | ||
268 | if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) | 233 | if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) |
269 | hwif->serialized = hwif->channel; | 234 | hwif->serialized = hwif->channel; |
270 | 235 | ||
271 | if (hwif->mate) | 236 | if (hwif->mate) |
@@ -277,7 +242,15 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) | |||
277 | return; | 242 | return; |
278 | } | 243 | } |
279 | 244 | ||
280 | hwif->ultra_mask = 0x7f; | 245 | hwif->ultra_mask = hwif->cds->udma_mask; |
246 | |||
247 | /* atp865 and atp865r */ | ||
248 | if (hwif->ultra_mask == 0x3f) { | ||
249 | /* check bit 0x10 of DMA status register */ | ||
250 | if (inb(pci_resource_start(dev, 4) + 2) & 0x10) | ||
251 | hwif->ultra_mask = 0x7f; /* udma0-6 */ | ||
252 | } | ||
253 | |||
281 | hwif->mwdma_mask = 0x07; | 254 | hwif->mwdma_mask = 0x07; |
282 | 255 | ||
283 | hwif->ide_dma_check = &aec62xx_config_drive_xfer_rate; | 256 | hwif->ide_dma_check = &aec62xx_config_drive_xfer_rate; |
@@ -344,6 +317,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { | |||
344 | .autodma = AUTODMA, | 317 | .autodma = AUTODMA, |
345 | .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, | 318 | .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, |
346 | .bootable = OFF_BOARD, | 319 | .bootable = OFF_BOARD, |
320 | .udma_mask = 0x07, /* udma0-2 */ | ||
347 | },{ /* 1 */ | 321 | },{ /* 1 */ |
348 | .name = "AEC6260", | 322 | .name = "AEC6260", |
349 | .init_setup = init_setup_aec62xx, | 323 | .init_setup = init_setup_aec62xx, |
@@ -353,6 +327,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { | |||
353 | .channels = 2, | 327 | .channels = 2, |
354 | .autodma = NOAUTODMA, | 328 | .autodma = NOAUTODMA, |
355 | .bootable = OFF_BOARD, | 329 | .bootable = OFF_BOARD, |
330 | .udma_mask = 0x1f, /* udma0-4 */ | ||
356 | },{ /* 2 */ | 331 | },{ /* 2 */ |
357 | .name = "AEC6260R", | 332 | .name = "AEC6260R", |
358 | .init_setup = init_setup_aec62xx, | 333 | .init_setup = init_setup_aec62xx, |
@@ -363,6 +338,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { | |||
363 | .autodma = AUTODMA, | 338 | .autodma = AUTODMA, |
364 | .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, | 339 | .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, |
365 | .bootable = NEVER_BOARD, | 340 | .bootable = NEVER_BOARD, |
341 | .udma_mask = 0x1f, /* udma0-4 */ | ||
366 | },{ /* 3 */ | 342 | },{ /* 3 */ |
367 | .name = "AEC6X80", | 343 | .name = "AEC6X80", |
368 | .init_setup = init_setup_aec6x80, | 344 | .init_setup = init_setup_aec6x80, |
@@ -372,6 +348,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { | |||
372 | .channels = 2, | 348 | .channels = 2, |
373 | .autodma = AUTODMA, | 349 | .autodma = AUTODMA, |
374 | .bootable = OFF_BOARD, | 350 | .bootable = OFF_BOARD, |
351 | .udma_mask = 0x3f, /* udma0-5 */ | ||
375 | },{ /* 4 */ | 352 | },{ /* 4 */ |
376 | .name = "AEC6X80R", | 353 | .name = "AEC6X80R", |
377 | .init_setup = init_setup_aec6x80, | 354 | .init_setup = init_setup_aec6x80, |
@@ -382,6 +359,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { | |||
382 | .autodma = AUTODMA, | 359 | .autodma = AUTODMA, |
383 | .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, | 360 | .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, |
384 | .bootable = OFF_BOARD, | 361 | .bootable = OFF_BOARD, |
362 | .udma_mask = 0x3f, /* udma0-5 */ | ||
385 | } | 363 | } |
386 | }; | 364 | }; |
387 | 365 | ||
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 946a12746cb5..428efdae0c7b 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c | |||
@@ -50,7 +50,7 @@ static u8 m5229_revision; | |||
50 | static u8 chip_is_1543c_e; | 50 | static u8 chip_is_1543c_e; |
51 | static struct pci_dev *isa_dev; | 51 | static struct pci_dev *isa_dev; |
52 | 52 | ||
53 | #if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) | 53 | #if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) |
54 | #include <linux/stat.h> | 54 | #include <linux/stat.h> |
55 | #include <linux/proc_fs.h> | 55 | #include <linux/proc_fs.h> |
56 | 56 | ||
@@ -278,7 +278,7 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count) | |||
278 | 278 | ||
279 | return p-buffer; /* => must be less than 4k! */ | 279 | return p-buffer; /* => must be less than 4k! */ |
280 | } | 280 | } |
281 | #endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */ | 281 | #endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ |
282 | 282 | ||
283 | /** | 283 | /** |
284 | * ali15x3_tune_pio - set up chipset for PIO mode | 284 | * ali15x3_tune_pio - set up chipset for PIO mode |
@@ -378,74 +378,31 @@ static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio) | |||
378 | } | 378 | } |
379 | 379 | ||
380 | /** | 380 | /** |
381 | * ali15x3_can_ultra - check for ultra DMA support | 381 | * ali_udma_filter - compute UDMA mask |
382 | * @drive: drive to do the check | 382 | * @drive: IDE device |
383 | * | 383 | * |
384 | * Check the drive and controller revisions. Return 0 if UDMA is | 384 | * Return available UDMA modes. |
385 | * not available, or 1 if UDMA can be used. The actual rules for | 385 | * |
386 | * the ALi are | 386 | * The actual rules for the ALi are: |
387 | * No UDMA on revisions <= 0x20 | 387 | * No UDMA on revisions <= 0x20 |
388 | * Disk only for revisions < 0xC2 | 388 | * Disk only for revisions < 0xC2 |
389 | * Not WDC drives for revisions < 0xC2 | 389 | * Not WDC drives for revisions < 0xC2 |
390 | * | 390 | * |
391 | * FIXME: WDC ifdef needs to die | 391 | * FIXME: WDC ifdef needs to die |
392 | */ | 392 | */ |
393 | |||
394 | static u8 ali15x3_can_ultra (ide_drive_t *drive) | ||
395 | { | ||
396 | #ifndef CONFIG_WDC_ALI15X3 | ||
397 | struct hd_driveid *id = drive->id; | ||
398 | #endif /* CONFIG_WDC_ALI15X3 */ | ||
399 | 393 | ||
400 | if (m5229_revision <= 0x20) { | 394 | static u8 ali_udma_filter(ide_drive_t *drive) |
401 | return 0; | ||
402 | } else if ((m5229_revision < 0xC2) && | ||
403 | #ifndef CONFIG_WDC_ALI15X3 | ||
404 | ((chip_is_1543c_e && strstr(id->model, "WDC ")) || | ||
405 | (drive->media!=ide_disk))) { | ||
406 | #else /* CONFIG_WDC_ALI15X3 */ | ||
407 | (drive->media!=ide_disk)) { | ||
408 | #endif /* CONFIG_WDC_ALI15X3 */ | ||
409 | return 0; | ||
410 | } else { | ||
411 | return 1; | ||
412 | } | ||
413 | } | ||
414 | |||
415 | /** | ||
416 | * ali15x3_ratemask - generate DMA mode list | ||
417 | * @drive: drive to compute against | ||
418 | * | ||
419 | * Generate a list of the available DMA modes for the drive. | ||
420 | * FIXME: this function contains lots of bogus masking we can dump | ||
421 | * | ||
422 | * Return the highest available mode (UDMA33, UDMA66, UDMA100,..) | ||
423 | */ | ||
424 | |||
425 | static u8 ali15x3_ratemask (ide_drive_t *drive) | ||
426 | { | 395 | { |
427 | u8 mode = 0, can_ultra = ali15x3_can_ultra(drive); | 396 | if (m5229_revision > 0x20 && m5229_revision < 0xC2) { |
428 | 397 | if (drive->media != ide_disk) | |
429 | if (m5229_revision > 0xC4 && can_ultra) { | 398 | return 0; |
430 | mode = 4; | 399 | #ifndef CONFIG_WDC_ALI15X3 |
431 | } else if (m5229_revision == 0xC4 && can_ultra) { | 400 | if (chip_is_1543c_e && strstr(drive->id->model, "WDC ")) |
432 | mode = 3; | 401 | return 0; |
433 | } else if (m5229_revision >= 0xC2 && can_ultra) { | 402 | #endif |
434 | mode = 2; | ||
435 | } else if (can_ultra) { | ||
436 | return 1; | ||
437 | } else { | ||
438 | return 0; | ||
439 | } | 403 | } |
440 | 404 | ||
441 | /* | 405 | return drive->hwif->ultra_mask; |
442 | * If the drive sees no suitable cable then UDMA 33 | ||
443 | * is the highest permitted mode | ||
444 | */ | ||
445 | |||
446 | if (!eighty_ninty_three(drive)) | ||
447 | mode = min(mode, (u8)1); | ||
448 | return mode; | ||
449 | } | 406 | } |
450 | 407 | ||
451 | /** | 408 | /** |
@@ -461,7 +418,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
461 | { | 418 | { |
462 | ide_hwif_t *hwif = HWIF(drive); | 419 | ide_hwif_t *hwif = HWIF(drive); |
463 | struct pci_dev *dev = hwif->pci_dev; | 420 | struct pci_dev *dev = hwif->pci_dev; |
464 | u8 speed = ide_rate_filter(ali15x3_ratemask(drive), xferspeed); | 421 | u8 speed = ide_rate_filter(drive, xferspeed); |
465 | u8 speed1 = speed; | 422 | u8 speed1 = speed; |
466 | u8 unit = (drive->select.b.unit & 0x01); | 423 | u8 unit = (drive->select.b.unit & 0x01); |
467 | u8 tmpbyte = 0x00; | 424 | u8 tmpbyte = 0x00; |
@@ -511,7 +468,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
511 | 468 | ||
512 | static int config_chipset_for_dma (ide_drive_t *drive) | 469 | static int config_chipset_for_dma (ide_drive_t *drive) |
513 | { | 470 | { |
514 | u8 speed = ide_dma_speed(drive, ali15x3_ratemask(drive)); | 471 | u8 speed = ide_max_dma_mode(drive); |
515 | 472 | ||
516 | if (!(speed)) | 473 | if (!(speed)) |
517 | return 0; | 474 | return 0; |
@@ -609,13 +566,13 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c | |||
609 | 566 | ||
610 | isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); | 567 | isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); |
611 | 568 | ||
612 | #if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) | 569 | #if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) |
613 | if (!ali_proc) { | 570 | if (!ali_proc) { |
614 | ali_proc = 1; | 571 | ali_proc = 1; |
615 | bmide_dev = dev; | 572 | bmide_dev = dev; |
616 | ide_pci_create_host_proc("ali", ali_get_info); | 573 | ide_pci_create_host_proc("ali", ali_get_info); |
617 | } | 574 | } |
618 | #endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */ | 575 | #endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ |
619 | 576 | ||
620 | local_irq_save(flags); | 577 | local_irq_save(flags); |
621 | 578 | ||
@@ -771,6 +728,7 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) | |||
771 | hwif->autodma = 0; | 728 | hwif->autodma = 0; |
772 | hwif->tuneproc = &ali15x3_tune_drive; | 729 | hwif->tuneproc = &ali15x3_tune_drive; |
773 | hwif->speedproc = &ali15x3_tune_chipset; | 730 | hwif->speedproc = &ali15x3_tune_chipset; |
731 | hwif->udma_filter = &ali_udma_filter; | ||
774 | 732 | ||
775 | /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ | 733 | /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ |
776 | hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0; | 734 | hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0; |
@@ -783,8 +741,17 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) | |||
783 | 741 | ||
784 | hwif->atapi_dma = 1; | 742 | hwif->atapi_dma = 1; |
785 | 743 | ||
786 | if (m5229_revision > 0x20) | 744 | if (m5229_revision <= 0x20) |
787 | hwif->ultra_mask = 0x7f; | 745 | hwif->ultra_mask = 0x00; /* no udma */ |
746 | else if (m5229_revision < 0xC2) | ||
747 | hwif->ultra_mask = 0x07; /* udma0-2 */ | ||
748 | else if (m5229_revision == 0xC2 || m5229_revision == 0xC3) | ||
749 | hwif->ultra_mask = 0x1f; /* udma0-4 */ | ||
750 | else if (m5229_revision == 0xC4) | ||
751 | hwif->ultra_mask = 0x3f; /* udma0-5 */ | ||
752 | else | ||
753 | hwif->ultra_mask = 0x7f; /* udma0-6 */ | ||
754 | |||
788 | hwif->mwdma_mask = 0x07; | 755 | hwif->mwdma_mask = 0x07; |
789 | hwif->swdma_mask = 0x07; | 756 | hwif->swdma_mask = 0x07; |
790 | 757 | ||
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 7989bdd842a2..becb1a5648b0 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c | |||
@@ -92,7 +92,7 @@ static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3 | |||
92 | * AMD /proc entry. | 92 | * AMD /proc entry. |
93 | */ | 93 | */ |
94 | 94 | ||
95 | #ifdef CONFIG_PROC_FS | 95 | #ifdef CONFIG_IDE_PROC_FS |
96 | 96 | ||
97 | #include <linux/stat.h> | 97 | #include <linux/stat.h> |
98 | #include <linux/proc_fs.h> | 98 | #include <linux/proc_fs.h> |
@@ -402,14 +402,14 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch | |||
402 | * Register /proc/ide/amd74xx entry | 402 | * Register /proc/ide/amd74xx entry |
403 | */ | 403 | */ |
404 | 404 | ||
405 | #if defined(DISPLAY_AMD_TIMINGS) && defined(CONFIG_PROC_FS) | 405 | #if defined(DISPLAY_AMD_TIMINGS) && defined(CONFIG_IDE_PROC_FS) |
406 | if (!amd74xx_proc) { | 406 | if (!amd74xx_proc) { |
407 | amd_base = pci_resource_start(dev, 4); | 407 | amd_base = pci_resource_start(dev, 4); |
408 | bmide_dev = dev; | 408 | bmide_dev = dev; |
409 | ide_pci_create_host_proc("amd74xx", amd74xx_get_info); | 409 | ide_pci_create_host_proc("amd74xx", amd74xx_get_info); |
410 | amd74xx_proc = 1; | 410 | amd74xx_proc = 1; |
411 | } | 411 | } |
412 | #endif /* DISPLAY_AMD_TIMINGS && CONFIG_PROC_FS */ | 412 | #endif /* DISPLAY_AMD_TIMINGS && CONFIG_IDE_PROC_FS */ |
413 | 413 | ||
414 | return dev->irq; | 414 | return dev->irq; |
415 | } | 415 | } |
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 2d48af32e3f4..0e52ad722a72 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c | |||
@@ -49,22 +49,6 @@ static int save_mdma_mode[4]; | |||
49 | static DEFINE_SPINLOCK(atiixp_lock); | 49 | static DEFINE_SPINLOCK(atiixp_lock); |
50 | 50 | ||
51 | /** | 51 | /** |
52 | * atiixp_ratemask - compute rate mask for ATIIXP IDE | ||
53 | * @drive: IDE drive to compute for | ||
54 | * | ||
55 | * Returns the available modes for the ATIIXP IDE controller. | ||
56 | */ | ||
57 | |||
58 | static u8 atiixp_ratemask(ide_drive_t *drive) | ||
59 | { | ||
60 | u8 mode = 3; | ||
61 | |||
62 | if (!eighty_ninty_three(drive)) | ||
63 | mode = min(mode, (u8)1); | ||
64 | return mode; | ||
65 | } | ||
66 | |||
67 | /** | ||
68 | * atiixp_dma_2_pio - return the PIO mode matching DMA | 52 | * atiixp_dma_2_pio - return the PIO mode matching DMA |
69 | * @xfer_rate: transfer speed | 53 | * @xfer_rate: transfer speed |
70 | * | 54 | * |
@@ -189,7 +173,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) | |||
189 | u16 tmp16; | 173 | u16 tmp16; |
190 | u8 speed, pio; | 174 | u8 speed, pio; |
191 | 175 | ||
192 | speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed); | 176 | speed = ide_rate_filter(drive, xferspeed); |
193 | 177 | ||
194 | spin_lock_irqsave(&atiixp_lock, flags); | 178 | spin_lock_irqsave(&atiixp_lock, flags); |
195 | 179 | ||
@@ -223,26 +207,6 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) | |||
223 | } | 207 | } |
224 | 208 | ||
225 | /** | 209 | /** |
226 | * atiixp_config_drive_for_dma - configure drive for DMA | ||
227 | * @drive: IDE drive to configure | ||
228 | * | ||
229 | * Set up a ATIIXP interface channel for the best available speed. | ||
230 | * We prefer UDMA if it is available and then MWDMA. If DMA is | ||
231 | * not available we switch to PIO and return 0. | ||
232 | */ | ||
233 | |||
234 | static int atiixp_config_drive_for_dma(ide_drive_t *drive) | ||
235 | { | ||
236 | u8 speed = ide_dma_speed(drive, atiixp_ratemask(drive)); | ||
237 | |||
238 | if (!speed) | ||
239 | return 0; | ||
240 | |||
241 | (void) atiixp_speedproc(drive, speed); | ||
242 | return ide_dma_enable(drive); | ||
243 | } | ||
244 | |||
245 | /** | ||
246 | * atiixp_dma_check - set up an IDE device | 210 | * atiixp_dma_check - set up an IDE device |
247 | * @drive: IDE drive to configure | 211 | * @drive: IDE drive to configure |
248 | * | 212 | * |
@@ -256,7 +220,7 @@ static int atiixp_dma_check(ide_drive_t *drive) | |||
256 | 220 | ||
257 | drive->init_speed = 0; | 221 | drive->init_speed = 0; |
258 | 222 | ||
259 | if (ide_use_dma(drive) && atiixp_config_drive_for_dma(drive)) | 223 | if (ide_tune_dma(drive)) |
260 | return 0; | 224 | return 0; |
261 | 225 | ||
262 | if (ide_use_fast_pio(drive)) { | 226 | if (ide_use_fast_pio(drive)) { |
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 77f51ab6d439..61ea96b5555c 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c | |||
@@ -74,7 +74,7 @@ | |||
74 | #define UDIDETCR1 0x7B | 74 | #define UDIDETCR1 0x7B |
75 | #define DTPR1 0x7C | 75 | #define DTPR1 0x7C |
76 | 76 | ||
77 | #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) | 77 | #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) |
78 | #include <linux/stat.h> | 78 | #include <linux/stat.h> |
79 | #include <linux/proc_fs.h> | 79 | #include <linux/proc_fs.h> |
80 | 80 | ||
@@ -165,7 +165,7 @@ static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count) | |||
165 | return p-buffer; /* => must be less than 4k! */ | 165 | return p-buffer; /* => must be less than 4k! */ |
166 | } | 166 | } |
167 | 167 | ||
168 | #endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) */ | 168 | #endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ |
169 | 169 | ||
170 | static u8 quantize_timing(int timing, int quant) | 170 | static u8 quantize_timing(int timing, int quant) |
171 | { | 171 | { |
@@ -292,55 +292,6 @@ static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio) | |||
292 | (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); | 292 | (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); |
293 | } | 293 | } |
294 | 294 | ||
295 | static u8 cmd64x_ratemask (ide_drive_t *drive) | ||
296 | { | ||
297 | struct pci_dev *dev = HWIF(drive)->pci_dev; | ||
298 | u8 mode = 0; | ||
299 | |||
300 | switch(dev->device) { | ||
301 | case PCI_DEVICE_ID_CMD_649: | ||
302 | mode = 3; | ||
303 | break; | ||
304 | case PCI_DEVICE_ID_CMD_648: | ||
305 | mode = 2; | ||
306 | break; | ||
307 | case PCI_DEVICE_ID_CMD_643: | ||
308 | return 0; | ||
309 | |||
310 | case PCI_DEVICE_ID_CMD_646: | ||
311 | { | ||
312 | unsigned int class_rev = 0; | ||
313 | pci_read_config_dword(dev, | ||
314 | PCI_CLASS_REVISION, &class_rev); | ||
315 | class_rev &= 0xff; | ||
316 | /* | ||
317 | * UltraDMA only supported on PCI646U and PCI646U2, which | ||
318 | * correspond to revisions 0x03, 0x05 and 0x07 respectively. | ||
319 | * Actually, although the CMD tech support people won't | ||
320 | * tell me the details, the 0x03 revision cannot support | ||
321 | * UDMA correctly without hardware modifications, and even | ||
322 | * then it only works with Quantum disks due to some | ||
323 | * hold time assumptions in the 646U part which are fixed | ||
324 | * in the 646U2. | ||
325 | * | ||
326 | * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. | ||
327 | */ | ||
328 | switch(class_rev) { | ||
329 | case 0x07: | ||
330 | case 0x05: | ||
331 | return 1; | ||
332 | case 0x03: | ||
333 | case 0x01: | ||
334 | default: | ||
335 | return 0; | ||
336 | } | ||
337 | } | ||
338 | } | ||
339 | if (!eighty_ninty_three(drive)) | ||
340 | mode = min(mode, (u8)1); | ||
341 | return mode; | ||
342 | } | ||
343 | |||
344 | static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) | 295 | static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) |
345 | { | 296 | { |
346 | ide_hwif_t *hwif = HWIF(drive); | 297 | ide_hwif_t *hwif = HWIF(drive); |
@@ -348,7 +299,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) | |||
348 | u8 unit = drive->dn & 0x01; | 299 | u8 unit = drive->dn & 0x01; |
349 | u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; | 300 | u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; |
350 | 301 | ||
351 | speed = ide_rate_filter(cmd64x_ratemask(drive), speed); | 302 | speed = ide_rate_filter(drive, speed); |
352 | 303 | ||
353 | if (speed >= XFER_SW_DMA_0) { | 304 | if (speed >= XFER_SW_DMA_0) { |
354 | (void) pci_read_config_byte(dev, pciU, ®U); | 305 | (void) pci_read_config_byte(dev, pciU, ®U); |
@@ -403,7 +354,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) | |||
403 | 354 | ||
404 | static int config_chipset_for_dma (ide_drive_t *drive) | 355 | static int config_chipset_for_dma (ide_drive_t *drive) |
405 | { | 356 | { |
406 | u8 speed = ide_dma_speed(drive, cmd64x_ratemask(drive)); | 357 | u8 speed = ide_max_dma_mode(drive); |
407 | 358 | ||
408 | if (!speed) | 359 | if (!speed) |
409 | return 0; | 360 | return 0; |
@@ -597,7 +548,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha | |||
597 | (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0); | 548 | (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0); |
598 | #endif /* CONFIG_PPC */ | 549 | #endif /* CONFIG_PPC */ |
599 | 550 | ||
600 | #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) | 551 | #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) |
601 | 552 | ||
602 | cmd_devs[n_cmd_devs++] = dev; | 553 | cmd_devs[n_cmd_devs++] = dev; |
603 | 554 | ||
@@ -605,7 +556,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha | |||
605 | cmd64x_proc = 1; | 556 | cmd64x_proc = 1; |
606 | ide_pci_create_host_proc("cmd64x", cmd64x_get_info); | 557 | ide_pci_create_host_proc("cmd64x", cmd64x_get_info); |
607 | } | 558 | } |
608 | #endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_PROC_FS */ | 559 | #endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_IDE_PROC_FS */ |
609 | 560 | ||
610 | return 0; | 561 | return 0; |
611 | } | 562 | } |
@@ -644,15 +595,24 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) | |||
644 | 595 | ||
645 | hwif->atapi_dma = 1; | 596 | hwif->atapi_dma = 1; |
646 | 597 | ||
647 | hwif->ultra_mask = 0x3f; | 598 | hwif->ultra_mask = hwif->cds->udma_mask; |
648 | hwif->mwdma_mask = 0x07; | 599 | |
600 | /* | ||
601 | * UltraDMA only supported on PCI646U and PCI646U2, which | ||
602 | * correspond to revisions 0x03, 0x05 and 0x07 respectively. | ||
603 | * Actually, although the CMD tech support people won't | ||
604 | * tell me the details, the 0x03 revision cannot support | ||
605 | * UDMA correctly without hardware modifications, and even | ||
606 | * then it only works with Quantum disks due to some | ||
607 | * hold time assumptions in the 646U part which are fixed | ||
608 | * in the 646U2. | ||
609 | * | ||
610 | * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. | ||
611 | */ | ||
612 | if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5) | ||
613 | hwif->ultra_mask = 0x00; | ||
649 | 614 | ||
650 | if (dev->device == PCI_DEVICE_ID_CMD_643) | 615 | hwif->mwdma_mask = 0x07; |
651 | hwif->ultra_mask = 0x80; | ||
652 | if (dev->device == PCI_DEVICE_ID_CMD_646) | ||
653 | hwif->ultra_mask = (class_rev > 0x04) ? 0x07 : 0x80; | ||
654 | if (dev->device == PCI_DEVICE_ID_CMD_648) | ||
655 | hwif->ultra_mask = 0x1f; | ||
656 | 616 | ||
657 | hwif->ide_dma_check = &cmd64x_config_drive_for_dma; | 617 | hwif->ide_dma_check = &cmd64x_config_drive_for_dma; |
658 | if (!(hwif->udma_four)) | 618 | if (!(hwif->udma_four)) |
@@ -716,6 +676,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { | |||
716 | .autodma = AUTODMA, | 676 | .autodma = AUTODMA, |
717 | .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, | 677 | .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, |
718 | .bootable = ON_BOARD, | 678 | .bootable = ON_BOARD, |
679 | .udma_mask = 0x00, /* no udma */ | ||
719 | },{ /* 1 */ | 680 | },{ /* 1 */ |
720 | .name = "CMD646", | 681 | .name = "CMD646", |
721 | .init_setup = init_setup_cmd646, | 682 | .init_setup = init_setup_cmd646, |
@@ -725,6 +686,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { | |||
725 | .autodma = AUTODMA, | 686 | .autodma = AUTODMA, |
726 | .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, | 687 | .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, |
727 | .bootable = ON_BOARD, | 688 | .bootable = ON_BOARD, |
689 | .udma_mask = 0x07, /* udma0-2 */ | ||
728 | },{ /* 2 */ | 690 | },{ /* 2 */ |
729 | .name = "CMD648", | 691 | .name = "CMD648", |
730 | .init_setup = init_setup_cmd64x, | 692 | .init_setup = init_setup_cmd64x, |
@@ -734,6 +696,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { | |||
734 | .autodma = AUTODMA, | 696 | .autodma = AUTODMA, |
735 | .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, | 697 | .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, |
736 | .bootable = ON_BOARD, | 698 | .bootable = ON_BOARD, |
699 | .udma_mask = 0x1f, /* udma0-4 */ | ||
737 | },{ /* 3 */ | 700 | },{ /* 3 */ |
738 | .name = "CMD649", | 701 | .name = "CMD649", |
739 | .init_setup = init_setup_cmd64x, | 702 | .init_setup = init_setup_cmd64x, |
@@ -743,6 +706,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = { | |||
743 | .autodma = AUTODMA, | 706 | .autodma = AUTODMA, |
744 | .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, | 707 | .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, |
745 | .bootable = ON_BOARD, | 708 | .bootable = ON_BOARD, |
709 | .udma_mask = 0x3f, /* udma0-5 */ | ||
746 | } | 710 | } |
747 | }; | 711 | }; |
748 | 712 | ||
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 400859a839f7..3b88a3a56116 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c | |||
@@ -213,6 +213,7 @@ static ide_pci_device_t cyrix_chipsets[] __devinitdata = { | |||
213 | 213 | ||
214 | static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) | 214 | static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
215 | { | 215 | { |
216 | ide_hwif_t *hwif = NULL, *mate = NULL; | ||
216 | ata_index_t index; | 217 | ata_index_t index; |
217 | ide_pci_device_t *d = &cyrix_chipsets[id->driver_data]; | 218 | ide_pci_device_t *d = &cyrix_chipsets[id->driver_data]; |
218 | 219 | ||
@@ -239,10 +240,21 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic | |||
239 | 240 | ||
240 | ide_pci_setup_ports(dev, d, 14, &index); | 241 | ide_pci_setup_ports(dev, d, 14, &index); |
241 | 242 | ||
242 | if((index.b.low & 0xf0) != 0xf0) | 243 | if ((index.b.low & 0xf0) != 0xf0) |
243 | probe_hwif_init(&ide_hwifs[index.b.low]); | 244 | hwif = &ide_hwifs[index.b.low]; |
244 | if((index.b.high & 0xf0) != 0xf0) | 245 | if ((index.b.high & 0xf0) != 0xf0) |
245 | probe_hwif_init(&ide_hwifs[index.b.high]); | 246 | mate = &ide_hwifs[index.b.high]; |
247 | |||
248 | if (hwif) | ||
249 | probe_hwif_init(hwif); | ||
250 | if (mate) | ||
251 | probe_hwif_init(mate); | ||
252 | |||
253 | if (hwif) | ||
254 | ide_proc_register_port(hwif); | ||
255 | if (mate) | ||
256 | ide_proc_register_port(mate); | ||
257 | |||
246 | return 0; | 258 | return 0; |
247 | } | 259 | } |
248 | 260 | ||
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 45f43efbf92c..41925c47ef05 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c | |||
@@ -127,20 +127,6 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed) | |||
127 | } | 127 | } |
128 | } | 128 | } |
129 | 129 | ||
130 | static u8 cs5535_ratemask(ide_drive_t *drive) | ||
131 | { | ||
132 | /* eighty93 will return 1 if it's 80core and capable of | ||
133 | exceeding udma2, 0 otherwise. we need ratemask to set | ||
134 | the max speed and if we can > udma2 then we return 2 | ||
135 | which selects speed_max as udma4 which is the 5535's max | ||
136 | speed, and 1 selects udma2 which is the max for 40c */ | ||
137 | if (!eighty_ninty_three(drive)) | ||
138 | return 1; | ||
139 | |||
140 | return 2; | ||
141 | } | ||
142 | |||
143 | |||
144 | /**** | 130 | /**** |
145 | * cs5535_set_drive - Configure the drive to the new speed | 131 | * cs5535_set_drive - Configure the drive to the new speed |
146 | * @drive: Drive to set up | 132 | * @drive: Drive to set up |
@@ -151,7 +137,7 @@ static u8 cs5535_ratemask(ide_drive_t *drive) | |||
151 | */ | 137 | */ |
152 | static int cs5535_set_drive(ide_drive_t *drive, u8 speed) | 138 | static int cs5535_set_drive(ide_drive_t *drive, u8 speed) |
153 | { | 139 | { |
154 | speed = ide_rate_filter(cs5535_ratemask(drive), speed); | 140 | speed = ide_rate_filter(drive, speed); |
155 | ide_config_drive_speed(drive, speed); | 141 | ide_config_drive_speed(drive, speed); |
156 | cs5535_set_speed(drive, speed); | 142 | cs5535_set_speed(drive, speed); |
157 | 143 | ||
@@ -178,28 +164,13 @@ static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed) | |||
178 | cs5535_set_speed(drive, xferspeed); | 164 | cs5535_set_speed(drive, xferspeed); |
179 | } | 165 | } |
180 | 166 | ||
181 | static int cs5535_config_drive_for_dma(ide_drive_t *drive) | ||
182 | { | ||
183 | u8 speed; | ||
184 | |||
185 | speed = ide_dma_speed(drive, cs5535_ratemask(drive)); | ||
186 | |||
187 | /* If no DMA speed was available then let dma_check hit pio */ | ||
188 | if (!speed) { | ||
189 | return 0; | ||
190 | } | ||
191 | |||
192 | cs5535_set_drive(drive, speed); | ||
193 | return ide_dma_enable(drive); | ||
194 | } | ||
195 | |||
196 | static int cs5535_dma_check(ide_drive_t *drive) | 167 | static int cs5535_dma_check(ide_drive_t *drive) |
197 | { | 168 | { |
198 | u8 speed; | 169 | u8 speed; |
199 | 170 | ||
200 | drive->init_speed = 0; | 171 | drive->init_speed = 0; |
201 | 172 | ||
202 | if (ide_use_dma(drive) && cs5535_config_drive_for_dma(drive)) | 173 | if (ide_tune_dma(drive)) |
203 | return 0; | 174 | return 0; |
204 | 175 | ||
205 | if (ide_use_fast_pio(drive)) { | 176 | if (ide_use_fast_pio(drive)) { |
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index dd7ec37fdeab..46f4a888c037 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c | |||
@@ -80,7 +80,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) | |||
80 | hw.irq = dev->irq; | 80 | hw.irq = dev->irq; |
81 | hw.chipset = ide_pci; /* this enables IRQ sharing */ | 81 | hw.chipset = ide_pci; /* this enables IRQ sharing */ |
82 | 82 | ||
83 | rc = ide_register_hw_with_fixup(&hw, &hwif, ide_undecoded_slave); | 83 | rc = ide_register_hw_with_fixup(&hw, 0, &hwif, ide_undecoded_slave); |
84 | if (rc < 0) { | 84 | if (rc < 0) { |
85 | printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc); | 85 | printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc); |
86 | pci_disable_device(dev); | 86 | pci_disable_device(dev); |
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index 924eaa3a5708..2c24c3de8846 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c | |||
@@ -43,15 +43,10 @@ | |||
43 | 43 | ||
44 | #define HPT343_DEBUG_DRIVE_INFO 0 | 44 | #define HPT343_DEBUG_DRIVE_INFO 0 |
45 | 45 | ||
46 | static u8 hpt34x_ratemask (ide_drive_t *drive) | ||
47 | { | ||
48 | return 1; | ||
49 | } | ||
50 | |||
51 | static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed) | 46 | static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
52 | { | 47 | { |
53 | struct pci_dev *dev = HWIF(drive)->pci_dev; | 48 | struct pci_dev *dev = HWIF(drive)->pci_dev; |
54 | u8 speed = ide_rate_filter(hpt34x_ratemask(drive), xferspeed); | 49 | u8 speed = ide_rate_filter(drive, xferspeed); |
55 | u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0; | 50 | u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0; |
56 | u8 hi_speed, lo_speed; | 51 | u8 hi_speed, lo_speed; |
57 | 52 | ||
@@ -89,29 +84,11 @@ static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio) | |||
89 | (void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio)); | 84 | (void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio)); |
90 | } | 85 | } |
91 | 86 | ||
92 | /* | ||
93 | * This allows the configuration of ide_pci chipset registers | ||
94 | * for cards that learn about the drive's UDMA, DMA, PIO capabilities | ||
95 | * after the drive is reported by the OS. Initially for designed for | ||
96 | * HPT343 UDMA chipset by HighPoint|Triones Technologies, Inc. | ||
97 | */ | ||
98 | |||
99 | static int config_chipset_for_dma (ide_drive_t *drive) | ||
100 | { | ||
101 | u8 speed = ide_dma_speed(drive, hpt34x_ratemask(drive)); | ||
102 | |||
103 | if (!(speed)) | ||
104 | return 0; | ||
105 | |||
106 | (void) hpt34x_tune_chipset(drive, speed); | ||
107 | return ide_dma_enable(drive); | ||
108 | } | ||
109 | |||
110 | static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive) | 87 | static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive) |
111 | { | 88 | { |
112 | drive->init_speed = 0; | 89 | drive->init_speed = 0; |
113 | 90 | ||
114 | if (ide_use_dma(drive) && config_chipset_for_dma(drive)) | 91 | if (ide_tune_dma(drive)) |
115 | #ifndef CONFIG_HPT34X_AUTODMA | 92 | #ifndef CONFIG_HPT34X_AUTODMA |
116 | return -1; | 93 | return -1; |
117 | #else | 94 | #else |
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index cf9d344d19f8..fcbc5605b38e 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c | |||
@@ -514,43 +514,31 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) | |||
514 | return 0; | 514 | return 0; |
515 | } | 515 | } |
516 | 516 | ||
517 | static u8 hpt3xx_ratemask(ide_drive_t *drive) | ||
518 | { | ||
519 | struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); | ||
520 | u8 mode = info->max_mode; | ||
521 | |||
522 | if (!eighty_ninty_three(drive) && mode) | ||
523 | mode = min(mode, (u8)1); | ||
524 | return mode; | ||
525 | } | ||
526 | |||
527 | /* | 517 | /* |
528 | * Note for the future; the SATA hpt37x we must set | 518 | * Note for the future; the SATA hpt37x we must set |
529 | * either PIO or UDMA modes 0,4,5 | 519 | * either PIO or UDMA modes 0,4,5 |
530 | */ | 520 | */ |
531 | 521 | ||
532 | static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) | 522 | static u8 hpt3xx_udma_filter(ide_drive_t *drive) |
533 | { | 523 | { |
534 | struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); | 524 | struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); |
535 | u8 chip_type = info->chip_type; | 525 | u8 chip_type = info->chip_type; |
536 | u8 mode = hpt3xx_ratemask(drive); | 526 | u8 mode = info->max_mode; |
537 | 527 | u8 mask; | |
538 | if (drive->media != ide_disk) | ||
539 | return min(speed, (u8)XFER_PIO_4); | ||
540 | 528 | ||
541 | switch (mode) { | 529 | switch (mode) { |
542 | case 0x04: | 530 | case 0x04: |
543 | speed = min_t(u8, speed, XFER_UDMA_6); | 531 | mask = 0x7f; |
544 | break; | 532 | break; |
545 | case 0x03: | 533 | case 0x03: |
546 | speed = min_t(u8, speed, XFER_UDMA_5); | 534 | mask = 0x3f; |
547 | if (chip_type >= HPT374) | 535 | if (chip_type >= HPT374) |
548 | break; | 536 | break; |
549 | if (!check_in_drive_list(drive, bad_ata100_5)) | 537 | if (!check_in_drive_list(drive, bad_ata100_5)) |
550 | goto check_bad_ata33; | 538 | goto check_bad_ata33; |
551 | /* fall thru */ | 539 | /* fall thru */ |
552 | case 0x02: | 540 | case 0x02: |
553 | speed = min_t(u8, speed, XFER_UDMA_4); | 541 | mask = 0x1f; |
554 | 542 | ||
555 | /* | 543 | /* |
556 | * CHECK ME, Does this need to be changed to HPT374 ?? | 544 | * CHECK ME, Does this need to be changed to HPT374 ?? |
@@ -561,13 +549,13 @@ static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) | |||
561 | !check_in_drive_list(drive, bad_ata66_4)) | 549 | !check_in_drive_list(drive, bad_ata66_4)) |
562 | goto check_bad_ata33; | 550 | goto check_bad_ata33; |
563 | 551 | ||
564 | speed = min_t(u8, speed, XFER_UDMA_3); | 552 | mask = 0x0f; |
565 | if (HPT366_ALLOW_ATA66_3 && | 553 | if (HPT366_ALLOW_ATA66_3 && |
566 | !check_in_drive_list(drive, bad_ata66_3)) | 554 | !check_in_drive_list(drive, bad_ata66_3)) |
567 | goto check_bad_ata33; | 555 | goto check_bad_ata33; |
568 | /* fall thru */ | 556 | /* fall thru */ |
569 | case 0x01: | 557 | case 0x01: |
570 | speed = min_t(u8, speed, XFER_UDMA_2); | 558 | mask = 0x07; |
571 | 559 | ||
572 | check_bad_ata33: | 560 | check_bad_ata33: |
573 | if (chip_type >= HPT370A) | 561 | if (chip_type >= HPT370A) |
@@ -577,10 +565,10 @@ static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) | |||
577 | /* fall thru */ | 565 | /* fall thru */ |
578 | case 0x00: | 566 | case 0x00: |
579 | default: | 567 | default: |
580 | speed = min_t(u8, speed, XFER_MW_DMA_2); | 568 | mask = 0x00; |
581 | break; | 569 | break; |
582 | } | 570 | } |
583 | return speed; | 571 | return mask; |
584 | } | 572 | } |
585 | 573 | ||
586 | static u32 get_speed_setting(u8 speed, struct hpt_info *info) | 574 | static u32 get_speed_setting(u8 speed, struct hpt_info *info) |
@@ -608,12 +596,19 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) | |||
608 | ide_hwif_t *hwif = HWIF(drive); | 596 | ide_hwif_t *hwif = HWIF(drive); |
609 | struct pci_dev *dev = hwif->pci_dev; | 597 | struct pci_dev *dev = hwif->pci_dev; |
610 | struct hpt_info *info = pci_get_drvdata(dev); | 598 | struct hpt_info *info = pci_get_drvdata(dev); |
611 | u8 speed = hpt3xx_ratefilter(drive, xferspeed); | 599 | u8 speed = ide_rate_filter(drive, xferspeed); |
612 | u8 itr_addr = drive->dn ? 0x44 : 0x40; | 600 | u8 itr_addr = drive->dn ? 0x44 : 0x40; |
613 | u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : | ||
614 | (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); | ||
615 | u32 new_itr = get_speed_setting(speed, info); | ||
616 | u32 old_itr = 0; | 601 | u32 old_itr = 0; |
602 | u32 itr_mask, new_itr; | ||
603 | |||
604 | /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ | ||
605 | if (drive->media != ide_disk) | ||
606 | speed = min_t(u8, speed, XFER_PIO_4); | ||
607 | |||
608 | itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : | ||
609 | (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); | ||
610 | |||
611 | new_itr = get_speed_setting(speed, info); | ||
617 | 612 | ||
618 | /* | 613 | /* |
619 | * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) | 614 | * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) |
@@ -633,12 +628,19 @@ static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed) | |||
633 | ide_hwif_t *hwif = HWIF(drive); | 628 | ide_hwif_t *hwif = HWIF(drive); |
634 | struct pci_dev *dev = hwif->pci_dev; | 629 | struct pci_dev *dev = hwif->pci_dev; |
635 | struct hpt_info *info = pci_get_drvdata(dev); | 630 | struct hpt_info *info = pci_get_drvdata(dev); |
636 | u8 speed = hpt3xx_ratefilter(drive, xferspeed); | 631 | u8 speed = ide_rate_filter(drive, xferspeed); |
637 | u8 itr_addr = 0x40 + (drive->dn * 4); | 632 | u8 itr_addr = 0x40 + (drive->dn * 4); |
638 | u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : | ||
639 | (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); | ||
640 | u32 new_itr = get_speed_setting(speed, info); | ||
641 | u32 old_itr = 0; | 633 | u32 old_itr = 0; |
634 | u32 itr_mask, new_itr; | ||
635 | |||
636 | /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ | ||
637 | if (drive->media != ide_disk) | ||
638 | speed = min_t(u8, speed, XFER_PIO_4); | ||
639 | |||
640 | itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : | ||
641 | (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); | ||
642 | |||
643 | new_itr = get_speed_setting(speed, info); | ||
642 | 644 | ||
643 | pci_read_config_dword(dev, itr_addr, &old_itr); | 645 | pci_read_config_dword(dev, itr_addr, &old_itr); |
644 | new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); | 646 | new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); |
@@ -667,24 +669,6 @@ static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio) | |||
667 | (void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio); | 669 | (void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio); |
668 | } | 670 | } |
669 | 671 | ||
670 | /* | ||
671 | * This allows the configuration of ide_pci chipset registers | ||
672 | * for cards that learn about the drive's UDMA, DMA, PIO capabilities | ||
673 | * after the drive is reported by the OS. Initially designed for | ||
674 | * HPT366 UDMA chipset by HighPoint|Triones Technologies, Inc. | ||
675 | * | ||
676 | */ | ||
677 | static int config_chipset_for_dma(ide_drive_t *drive) | ||
678 | { | ||
679 | u8 speed = ide_dma_speed(drive, hpt3xx_ratemask(drive)); | ||
680 | |||
681 | if (!speed) | ||
682 | return 0; | ||
683 | |||
684 | (void) hpt3xx_tune_chipset(drive, speed); | ||
685 | return ide_dma_enable(drive); | ||
686 | } | ||
687 | |||
688 | static int hpt3xx_quirkproc(ide_drive_t *drive) | 672 | static int hpt3xx_quirkproc(ide_drive_t *drive) |
689 | { | 673 | { |
690 | struct hd_driveid *id = drive->id; | 674 | struct hd_driveid *id = drive->id; |
@@ -739,7 +723,7 @@ static int hpt366_config_drive_xfer_rate(ide_drive_t *drive) | |||
739 | { | 723 | { |
740 | drive->init_speed = 0; | 724 | drive->init_speed = 0; |
741 | 725 | ||
742 | if (ide_use_dma(drive) && config_chipset_for_dma(drive)) | 726 | if (ide_tune_dma(drive)) |
743 | return 0; | 727 | return 0; |
744 | 728 | ||
745 | if (ide_use_fast_pio(drive)) | 729 | if (ide_use_fast_pio(drive)) |
@@ -1271,6 +1255,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) | |||
1271 | hwif->intrproc = &hpt3xx_intrproc; | 1255 | hwif->intrproc = &hpt3xx_intrproc; |
1272 | hwif->maskproc = &hpt3xx_maskproc; | 1256 | hwif->maskproc = &hpt3xx_maskproc; |
1273 | hwif->busproc = &hpt3xx_busproc; | 1257 | hwif->busproc = &hpt3xx_busproc; |
1258 | hwif->udma_filter = &hpt3xx_udma_filter; | ||
1274 | 1259 | ||
1275 | /* | 1260 | /* |
1276 | * HPT3xxN chips have some complications: | 1261 | * HPT3xxN chips have some complications: |
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index 424f00bb160d..c04a02687b95 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c | |||
@@ -17,22 +17,6 @@ | |||
17 | 17 | ||
18 | #include <asm/io.h> | 18 | #include <asm/io.h> |
19 | 19 | ||
20 | /* | ||
21 | * it8213_ratemask - Compute available modes | ||
22 | * @drive: IDE drive | ||
23 | * | ||
24 | * Compute the available speeds for the devices on the interface. This | ||
25 | * is all modes to ATA133 clipped by drive cable setup. | ||
26 | */ | ||
27 | |||
28 | static u8 it8213_ratemask (ide_drive_t *drive) | ||
29 | { | ||
30 | u8 mode = 4; | ||
31 | if (!eighty_ninty_three(drive)) | ||
32 | mode = min_t(u8, mode, 1); | ||
33 | return mode; | ||
34 | } | ||
35 | |||
36 | /** | 20 | /** |
37 | * it8213_dma_2_pio - return the PIO mode matching DMA | 21 | * it8213_dma_2_pio - return the PIO mode matching DMA |
38 | * @xfer_rate: transfer speed | 22 | * @xfer_rate: transfer speed |
@@ -145,7 +129,7 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
145 | ide_hwif_t *hwif = HWIF(drive); | 129 | ide_hwif_t *hwif = HWIF(drive); |
146 | struct pci_dev *dev = hwif->pci_dev; | 130 | struct pci_dev *dev = hwif->pci_dev; |
147 | u8 maslave = 0x40; | 131 | u8 maslave = 0x40; |
148 | u8 speed = ide_rate_filter(it8213_ratemask(drive), xferspeed); | 132 | u8 speed = ide_rate_filter(drive, xferspeed); |
149 | int a_speed = 3 << (drive->dn * 4); | 133 | int a_speed = 3 << (drive->dn * 4); |
150 | int u_flag = 1 << drive->dn; | 134 | int u_flag = 1 << drive->dn; |
151 | int v_flag = 0x01 << drive->dn; | 135 | int v_flag = 0x01 << drive->dn; |
@@ -213,25 +197,6 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
213 | return ide_config_drive_speed(drive, speed); | 197 | return ide_config_drive_speed(drive, speed); |
214 | } | 198 | } |
215 | 199 | ||
216 | /* | ||
217 | * config_chipset_for_dma - configure for DMA | ||
218 | * @drive: drive to configure | ||
219 | * | ||
220 | * Called by the IDE layer when it wants the timings set up. | ||
221 | */ | ||
222 | |||
223 | static int config_chipset_for_dma (ide_drive_t *drive) | ||
224 | { | ||
225 | u8 speed = ide_dma_speed(drive, it8213_ratemask(drive)); | ||
226 | |||
227 | if (!speed) | ||
228 | return 0; | ||
229 | |||
230 | it8213_tune_chipset(drive, speed); | ||
231 | |||
232 | return ide_dma_enable(drive); | ||
233 | } | ||
234 | |||
235 | /** | 200 | /** |
236 | * it8213_configure_drive_for_dma - set up for DMA transfers | 201 | * it8213_configure_drive_for_dma - set up for DMA transfers |
237 | * @drive: drive we are going to set up | 202 | * @drive: drive we are going to set up |
@@ -246,7 +211,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive) | |||
246 | { | 211 | { |
247 | u8 pio; | 212 | u8 pio; |
248 | 213 | ||
249 | if (ide_use_dma(drive) && config_chipset_for_dma(drive)) | 214 | if (ide_tune_dma(drive)) |
250 | return 0; | 215 | return 0; |
251 | 216 | ||
252 | pio = ide_get_best_pio_mode(drive, 255, 4, NULL); | 217 | pio = ide_get_best_pio_mode(drive, 255, 4, NULL); |
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 4e1254813ee0..442f658c6ae7 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c | |||
@@ -229,22 +229,6 @@ static void it821x_clock_strategy(ide_drive_t *drive) | |||
229 | } | 229 | } |
230 | 230 | ||
231 | /** | 231 | /** |
232 | * it821x_ratemask - Compute available modes | ||
233 | * @drive: IDE drive | ||
234 | * | ||
235 | * Compute the available speeds for the devices on the interface. This | ||
236 | * is all modes to ATA133 clipped by drive cable setup. | ||
237 | */ | ||
238 | |||
239 | static u8 it821x_ratemask (ide_drive_t *drive) | ||
240 | { | ||
241 | u8 mode = 4; | ||
242 | if (!eighty_ninty_three(drive)) | ||
243 | mode = min(mode, (u8)1); | ||
244 | return mode; | ||
245 | } | ||
246 | |||
247 | /** | ||
248 | * it821x_tunepio - tune a drive | 232 | * it821x_tunepio - tune a drive |
249 | * @drive: drive to tune | 233 | * @drive: drive to tune |
250 | * @pio: the desired PIO mode | 234 | * @pio: the desired PIO mode |
@@ -438,7 +422,7 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed) | |||
438 | 422 | ||
439 | ide_hwif_t *hwif = drive->hwif; | 423 | ide_hwif_t *hwif = drive->hwif; |
440 | struct it821x_dev *itdev = ide_get_hwifdata(hwif); | 424 | struct it821x_dev *itdev = ide_get_hwifdata(hwif); |
441 | u8 speed = ide_rate_filter(it821x_ratemask(drive), xferspeed); | 425 | u8 speed = ide_rate_filter(drive, xferspeed); |
442 | 426 | ||
443 | switch (speed) { | 427 | switch (speed) { |
444 | case XFER_PIO_4: | 428 | case XFER_PIO_4: |
@@ -488,7 +472,7 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed) | |||
488 | 472 | ||
489 | static int config_chipset_for_dma (ide_drive_t *drive) | 473 | static int config_chipset_for_dma (ide_drive_t *drive) |
490 | { | 474 | { |
491 | u8 speed = ide_dma_speed(drive, it821x_ratemask(drive)); | 475 | u8 speed = ide_max_dma_mode(drive); |
492 | 476 | ||
493 | if (speed == 0) | 477 | if (speed == 0) |
494 | return 0; | 478 | return 0; |
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index be4fc96c29e0..76ed25147229 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c | |||
@@ -22,22 +22,6 @@ typedef enum { | |||
22 | } port_type; | 22 | } port_type; |
23 | 23 | ||
24 | /** | 24 | /** |
25 | * jmicron_ratemask - Compute available modes | ||
26 | * @drive: IDE drive | ||
27 | * | ||
28 | * Compute the available speeds for the devices on the interface. This | ||
29 | * is all modes to ATA133 clipped by drive cable setup. | ||
30 | */ | ||
31 | |||
32 | static u8 jmicron_ratemask(ide_drive_t *drive) | ||
33 | { | ||
34 | u8 mode = 4; | ||
35 | if (!eighty_ninty_three(drive)) | ||
36 | mode = min(mode, (u8)1); | ||
37 | return mode; | ||
38 | } | ||
39 | |||
40 | /** | ||
41 | * ata66_jmicron - Cable check | 25 | * ata66_jmicron - Cable check |
42 | * @hwif: IDE port | 26 | * @hwif: IDE port |
43 | * | 27 | * |
@@ -129,32 +113,12 @@ static void config_jmicron_chipset_for_pio (ide_drive_t *drive, byte set_speed) | |||
129 | 113 | ||
130 | static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed) | 114 | static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed) |
131 | { | 115 | { |
132 | 116 | u8 speed = ide_rate_filter(drive, xferspeed); | |
133 | u8 speed = ide_rate_filter(jmicron_ratemask(drive), xferspeed); | ||
134 | 117 | ||
135 | return ide_config_drive_speed(drive, speed); | 118 | return ide_config_drive_speed(drive, speed); |
136 | } | 119 | } |
137 | 120 | ||
138 | /** | 121 | /** |
139 | * config_chipset_for_dma - configure for DMA | ||
140 | * @drive: drive to configure | ||
141 | * | ||
142 | * As the JMicron snoops for timings all we actually need to do is | ||
143 | * make sure we don't set an invalid mode. | ||
144 | */ | ||
145 | |||
146 | static int config_chipset_for_dma (ide_drive_t *drive) | ||
147 | { | ||
148 | u8 speed = ide_dma_speed(drive, jmicron_ratemask(drive)); | ||
149 | |||
150 | if (!speed) | ||
151 | return 0; | ||
152 | |||
153 | jmicron_tune_chipset(drive, speed); | ||
154 | return ide_dma_enable(drive); | ||
155 | } | ||
156 | |||
157 | /** | ||
158 | * jmicron_configure_drive_for_dma - set up for DMA transfers | 122 | * jmicron_configure_drive_for_dma - set up for DMA transfers |
159 | * @drive: drive we are going to set up | 123 | * @drive: drive we are going to set up |
160 | * | 124 | * |
@@ -164,7 +128,7 @@ static int config_chipset_for_dma (ide_drive_t *drive) | |||
164 | 128 | ||
165 | static int jmicron_config_drive_for_dma (ide_drive_t *drive) | 129 | static int jmicron_config_drive_for_dma (ide_drive_t *drive) |
166 | { | 130 | { |
167 | if (ide_use_dma(drive) && config_chipset_for_dma(drive)) | 131 | if (ide_tune_dma(drive)) |
168 | return 0; | 132 | return 0; |
169 | 133 | ||
170 | config_jmicron_chipset_for_pio(drive, 1); | 134 | config_jmicron_chipset_for_pio(drive, 1); |
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 2cdd629c653d..65b1e124edf7 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c | |||
@@ -37,8 +37,6 @@ | |||
37 | #include <asm/pci-bridge.h> | 37 | #include <asm/pci-bridge.h> |
38 | #endif | 38 | #endif |
39 | 39 | ||
40 | #define PDC202_DEBUG_CABLE 0 | ||
41 | |||
42 | #undef DEBUG | 40 | #undef DEBUG |
43 | 41 | ||
44 | #ifdef DEBUG | 42 | #ifdef DEBUG |
@@ -82,16 +80,6 @@ static u8 max_dma_rate(struct pci_dev *pdev) | |||
82 | return mode; | 80 | return mode; |
83 | } | 81 | } |
84 | 82 | ||
85 | static u8 pdcnew_ratemask(ide_drive_t *drive) | ||
86 | { | ||
87 | u8 mode = max_dma_rate(HWIF(drive)->pci_dev); | ||
88 | |||
89 | if (!eighty_ninty_three(drive)) | ||
90 | mode = min_t(u8, mode, 1); | ||
91 | |||
92 | return mode; | ||
93 | } | ||
94 | |||
95 | /** | 83 | /** |
96 | * get_indexed_reg - Get indexed register | 84 | * get_indexed_reg - Get indexed register |
97 | * @hwif: for the port address | 85 | * @hwif: for the port address |
@@ -164,7 +152,7 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed) | |||
164 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; | 152 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; |
165 | int err; | 153 | int err; |
166 | 154 | ||
167 | speed = ide_rate_filter(pdcnew_ratemask(drive), speed); | 155 | speed = ide_rate_filter(drive, speed); |
168 | 156 | ||
169 | /* | 157 | /* |
170 | * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will | 158 | * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will |
@@ -244,17 +232,8 @@ static int config_chipset_for_dma(ide_drive_t *drive) | |||
244 | { | 232 | { |
245 | struct hd_driveid *id = drive->id; | 233 | struct hd_driveid *id = drive->id; |
246 | ide_hwif_t *hwif = HWIF(drive); | 234 | ide_hwif_t *hwif = HWIF(drive); |
247 | u8 ultra_66 = (id->dma_ultra & 0x0078) ? 1 : 0; | ||
248 | u8 cable = pdcnew_cable_detect(hwif); | ||
249 | u8 speed; | 235 | u8 speed; |
250 | 236 | ||
251 | if (ultra_66 && cable) { | ||
252 | printk(KERN_WARNING "Warning: %s channel " | ||
253 | "requires an 80-pin cable for operation.\n", | ||
254 | hwif->channel ? "Secondary" : "Primary"); | ||
255 | printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name); | ||
256 | } | ||
257 | |||
258 | if (id->capability & 4) { | 237 | if (id->capability & 4) { |
259 | /* | 238 | /* |
260 | * Set IORDY_EN & PREFETCH_EN (this seems to have | 239 | * Set IORDY_EN & PREFETCH_EN (this seems to have |
@@ -267,7 +246,7 @@ static int config_chipset_for_dma(ide_drive_t *drive) | |||
267 | set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03); | 246 | set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03); |
268 | } | 247 | } |
269 | 248 | ||
270 | speed = ide_dma_speed(drive, pdcnew_ratemask(drive)); | 249 | speed = ide_max_dma_mode(drive); |
271 | 250 | ||
272 | if (!speed) | 251 | if (!speed) |
273 | return 0; | 252 | return 0; |
@@ -543,7 +522,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) | |||
543 | hwif->drives[0].autotune = hwif->drives[1].autotune = 1; | 522 | hwif->drives[0].autotune = hwif->drives[1].autotune = 1; |
544 | 523 | ||
545 | hwif->atapi_dma = 1; | 524 | hwif->atapi_dma = 1; |
546 | hwif->ultra_mask = 0x7f; | 525 | |
526 | hwif->ultra_mask = hwif->cds->udma_mask; | ||
547 | hwif->mwdma_mask = 0x07; | 527 | hwif->mwdma_mask = 0x07; |
548 | 528 | ||
549 | hwif->err_stops_fifo = 1; | 529 | hwif->err_stops_fifo = 1; |
@@ -556,11 +536,6 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) | |||
556 | if (!noautodma) | 536 | if (!noautodma) |
557 | hwif->autodma = 1; | 537 | hwif->autodma = 1; |
558 | hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; | 538 | hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; |
559 | |||
560 | #if PDC202_DEBUG_CABLE | ||
561 | printk(KERN_DEBUG "%s: %s-pin cable\n", | ||
562 | hwif->name, hwif->udma_four ? "80" : "40"); | ||
563 | #endif /* PDC202_DEBUG_CABLE */ | ||
564 | } | 539 | } |
565 | 540 | ||
566 | static int __devinit init_setup_pdcnew(struct pci_dev *dev, ide_pci_device_t *d) | 541 | static int __devinit init_setup_pdcnew(struct pci_dev *dev, ide_pci_device_t *d) |
@@ -619,6 +594,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { | |||
619 | .channels = 2, | 594 | .channels = 2, |
620 | .autodma = AUTODMA, | 595 | .autodma = AUTODMA, |
621 | .bootable = OFF_BOARD, | 596 | .bootable = OFF_BOARD, |
597 | .udma_mask = 0x3f, /* udma0-5 */ | ||
622 | },{ /* 1 */ | 598 | },{ /* 1 */ |
623 | .name = "PDC20269", | 599 | .name = "PDC20269", |
624 | .init_setup = init_setup_pdcnew, | 600 | .init_setup = init_setup_pdcnew, |
@@ -627,6 +603,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { | |||
627 | .channels = 2, | 603 | .channels = 2, |
628 | .autodma = AUTODMA, | 604 | .autodma = AUTODMA, |
629 | .bootable = OFF_BOARD, | 605 | .bootable = OFF_BOARD, |
606 | .udma_mask = 0x7f, /* udma0-6*/ | ||
630 | },{ /* 2 */ | 607 | },{ /* 2 */ |
631 | .name = "PDC20270", | 608 | .name = "PDC20270", |
632 | .init_setup = init_setup_pdc20270, | 609 | .init_setup = init_setup_pdc20270, |
@@ -635,6 +612,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { | |||
635 | .channels = 2, | 612 | .channels = 2, |
636 | .autodma = AUTODMA, | 613 | .autodma = AUTODMA, |
637 | .bootable = OFF_BOARD, | 614 | .bootable = OFF_BOARD, |
615 | .udma_mask = 0x3f, /* udma0-5 */ | ||
638 | },{ /* 3 */ | 616 | },{ /* 3 */ |
639 | .name = "PDC20271", | 617 | .name = "PDC20271", |
640 | .init_setup = init_setup_pdcnew, | 618 | .init_setup = init_setup_pdcnew, |
@@ -643,6 +621,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { | |||
643 | .channels = 2, | 621 | .channels = 2, |
644 | .autodma = AUTODMA, | 622 | .autodma = AUTODMA, |
645 | .bootable = OFF_BOARD, | 623 | .bootable = OFF_BOARD, |
624 | .udma_mask = 0x7f, /* udma0-6*/ | ||
646 | },{ /* 4 */ | 625 | },{ /* 4 */ |
647 | .name = "PDC20275", | 626 | .name = "PDC20275", |
648 | .init_setup = init_setup_pdcnew, | 627 | .init_setup = init_setup_pdcnew, |
@@ -651,6 +630,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { | |||
651 | .channels = 2, | 630 | .channels = 2, |
652 | .autodma = AUTODMA, | 631 | .autodma = AUTODMA, |
653 | .bootable = OFF_BOARD, | 632 | .bootable = OFF_BOARD, |
633 | .udma_mask = 0x7f, /* udma0-6*/ | ||
654 | },{ /* 5 */ | 634 | },{ /* 5 */ |
655 | .name = "PDC20276", | 635 | .name = "PDC20276", |
656 | .init_setup = init_setup_pdc20276, | 636 | .init_setup = init_setup_pdc20276, |
@@ -659,6 +639,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { | |||
659 | .channels = 2, | 639 | .channels = 2, |
660 | .autodma = AUTODMA, | 640 | .autodma = AUTODMA, |
661 | .bootable = OFF_BOARD, | 641 | .bootable = OFF_BOARD, |
642 | .udma_mask = 0x7f, /* udma0-6*/ | ||
662 | },{ /* 6 */ | 643 | },{ /* 6 */ |
663 | .name = "PDC20277", | 644 | .name = "PDC20277", |
664 | .init_setup = init_setup_pdcnew, | 645 | .init_setup = init_setup_pdcnew, |
@@ -667,6 +648,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { | |||
667 | .channels = 2, | 648 | .channels = 2, |
668 | .autodma = AUTODMA, | 649 | .autodma = AUTODMA, |
669 | .bootable = OFF_BOARD, | 650 | .bootable = OFF_BOARD, |
651 | .udma_mask = 0x7f, /* udma0-6*/ | ||
670 | } | 652 | } |
671 | }; | 653 | }; |
672 | 654 | ||
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index a7a639fe1eaf..7146fe3f6ba7 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c | |||
@@ -46,7 +46,6 @@ | |||
46 | #include <asm/io.h> | 46 | #include <asm/io.h> |
47 | #include <asm/irq.h> | 47 | #include <asm/irq.h> |
48 | 48 | ||
49 | #define PDC202_DEBUG_CABLE 0 | ||
50 | #define PDC202XX_DEBUG_DRIVE_INFO 0 | 49 | #define PDC202XX_DEBUG_DRIVE_INFO 0 |
51 | 50 | ||
52 | static const char *pdc_quirk_drives[] = { | 51 | static const char *pdc_quirk_drives[] = { |
@@ -101,35 +100,12 @@ static const char *pdc_quirk_drives[] = { | |||
101 | #define MC1 0x02 /* DMA"C" timing */ | 100 | #define MC1 0x02 /* DMA"C" timing */ |
102 | #define MC0 0x01 /* DMA"C" timing */ | 101 | #define MC0 0x01 /* DMA"C" timing */ |
103 | 102 | ||
104 | static u8 pdc202xx_ratemask (ide_drive_t *drive) | ||
105 | { | ||
106 | u8 mode; | ||
107 | |||
108 | switch(HWIF(drive)->pci_dev->device) { | ||
109 | case PCI_DEVICE_ID_PROMISE_20267: | ||
110 | case PCI_DEVICE_ID_PROMISE_20265: | ||
111 | mode = 3; | ||
112 | break; | ||
113 | case PCI_DEVICE_ID_PROMISE_20263: | ||
114 | case PCI_DEVICE_ID_PROMISE_20262: | ||
115 | mode = 2; | ||
116 | break; | ||
117 | case PCI_DEVICE_ID_PROMISE_20246: | ||
118 | return 1; | ||
119 | default: | ||
120 | return 0; | ||
121 | } | ||
122 | if (!eighty_ninty_three(drive)) | ||
123 | mode = min(mode, (u8)1); | ||
124 | return mode; | ||
125 | } | ||
126 | |||
127 | static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) | 103 | static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
128 | { | 104 | { |
129 | ide_hwif_t *hwif = HWIF(drive); | 105 | ide_hwif_t *hwif = HWIF(drive); |
130 | struct pci_dev *dev = hwif->pci_dev; | 106 | struct pci_dev *dev = hwif->pci_dev; |
131 | u8 drive_pci = 0x60 + (drive->dn << 2); | 107 | u8 drive_pci = 0x60 + (drive->dn << 2); |
132 | u8 speed = ide_rate_filter(pdc202xx_ratemask(drive), xferspeed); | 108 | u8 speed = ide_rate_filter(drive, xferspeed); |
133 | 109 | ||
134 | u32 drive_conf; | 110 | u32 drive_conf; |
135 | u8 AP, BP, CP, DP; | 111 | u8 AP, BP, CP, DP; |
@@ -261,20 +237,7 @@ static int config_chipset_for_dma (ide_drive_t *drive) | |||
261 | u32 drive_conf = 0; | 237 | u32 drive_conf = 0; |
262 | u8 drive_pci = 0x60 + (drive->dn << 2); | 238 | u8 drive_pci = 0x60 + (drive->dn << 2); |
263 | u8 test1 = 0, test2 = 0, speed = -1; | 239 | u8 test1 = 0, test2 = 0, speed = -1; |
264 | u8 AP = 0, cable = 0; | 240 | u8 AP = 0; |
265 | |||
266 | u8 ultra_66 = ((id->dma_ultra & 0x0010) || | ||
267 | (id->dma_ultra & 0x0008)) ? 1 : 0; | ||
268 | |||
269 | if (dev->device != PCI_DEVICE_ID_PROMISE_20246) | ||
270 | cable = pdc202xx_old_cable_detect(hwif); | ||
271 | else | ||
272 | ultra_66 = 0; | ||
273 | |||
274 | if (ultra_66 && cable) { | ||
275 | printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary"); | ||
276 | printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name); | ||
277 | } | ||
278 | 241 | ||
279 | if (dev->device != PCI_DEVICE_ID_PROMISE_20246) | 242 | if (dev->device != PCI_DEVICE_ID_PROMISE_20246) |
280 | pdc_old_disable_66MHz_clock(drive->hwif); | 243 | pdc_old_disable_66MHz_clock(drive->hwif); |
@@ -308,7 +271,7 @@ chipset_is_set: | |||
308 | if (drive->media == ide_disk) /* PREFETCH_EN */ | 271 | if (drive->media == ide_disk) /* PREFETCH_EN */ |
309 | pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN); | 272 | pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN); |
310 | 273 | ||
311 | speed = ide_dma_speed(drive, pdc202xx_ratemask(drive)); | 274 | speed = ide_max_dma_mode(drive); |
312 | 275 | ||
313 | if (!(speed)) { | 276 | if (!(speed)) { |
314 | /* restore original pci-config space */ | 277 | /* restore original pci-config space */ |
@@ -478,7 +441,7 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) | |||
478 | 441 | ||
479 | hwif->drives[0].autotune = hwif->drives[1].autotune = 1; | 442 | hwif->drives[0].autotune = hwif->drives[1].autotune = 1; |
480 | 443 | ||
481 | hwif->ultra_mask = 0x3f; | 444 | hwif->ultra_mask = hwif->cds->udma_mask; |
482 | hwif->mwdma_mask = 0x07; | 445 | hwif->mwdma_mask = 0x07; |
483 | hwif->swdma_mask = 0x07; | 446 | hwif->swdma_mask = 0x07; |
484 | hwif->atapi_dma = 1; | 447 | hwif->atapi_dma = 1; |
@@ -500,10 +463,6 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) | |||
500 | if (!noautodma) | 463 | if (!noautodma) |
501 | hwif->autodma = 1; | 464 | hwif->autodma = 1; |
502 | hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; | 465 | hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; |
503 | #if PDC202_DEBUG_CABLE | ||
504 | printk(KERN_DEBUG "%s: %s-pin cable\n", | ||
505 | hwif->name, hwif->udma_four ? "80" : "40"); | ||
506 | #endif /* PDC202_DEBUG_CABLE */ | ||
507 | } | 466 | } |
508 | 467 | ||
509 | static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase) | 468 | static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase) |
@@ -587,6 +546,7 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = { | |||
587 | .autodma = AUTODMA, | 546 | .autodma = AUTODMA, |
588 | .bootable = OFF_BOARD, | 547 | .bootable = OFF_BOARD, |
589 | .extra = 16, | 548 | .extra = 16, |
549 | .udma_mask = 0x07, /* udma0-2 */ | ||
590 | },{ /* 1 */ | 550 | },{ /* 1 */ |
591 | .name = "PDC20262", | 551 | .name = "PDC20262", |
592 | .init_setup = init_setup_pdc202ata4, | 552 | .init_setup = init_setup_pdc202ata4, |
@@ -597,6 +557,7 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = { | |||
597 | .autodma = AUTODMA, | 557 | .autodma = AUTODMA, |
598 | .bootable = OFF_BOARD, | 558 | .bootable = OFF_BOARD, |
599 | .extra = 48, | 559 | .extra = 48, |
560 | .udma_mask = 0x1f, /* udma0-4 */ | ||
600 | },{ /* 2 */ | 561 | },{ /* 2 */ |
601 | .name = "PDC20263", | 562 | .name = "PDC20263", |
602 | .init_setup = init_setup_pdc202ata4, | 563 | .init_setup = init_setup_pdc202ata4, |
@@ -607,6 +568,7 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = { | |||
607 | .autodma = AUTODMA, | 568 | .autodma = AUTODMA, |
608 | .bootable = OFF_BOARD, | 569 | .bootable = OFF_BOARD, |
609 | .extra = 48, | 570 | .extra = 48, |
571 | .udma_mask = 0x1f, /* udma0-4 */ | ||
610 | },{ /* 3 */ | 572 | },{ /* 3 */ |
611 | .name = "PDC20265", | 573 | .name = "PDC20265", |
612 | .init_setup = init_setup_pdc20265, | 574 | .init_setup = init_setup_pdc20265, |
@@ -617,6 +579,7 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = { | |||
617 | .autodma = AUTODMA, | 579 | .autodma = AUTODMA, |
618 | .bootable = OFF_BOARD, | 580 | .bootable = OFF_BOARD, |
619 | .extra = 48, | 581 | .extra = 48, |
582 | .udma_mask = 0x3f, /* udma0-5 */ | ||
620 | },{ /* 4 */ | 583 | },{ /* 4 */ |
621 | .name = "PDC20267", | 584 | .name = "PDC20267", |
622 | .init_setup = init_setup_pdc202xx, | 585 | .init_setup = init_setup_pdc202xx, |
@@ -627,6 +590,7 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = { | |||
627 | .autodma = AUTODMA, | 590 | .autodma = AUTODMA, |
628 | .bootable = OFF_BOARD, | 591 | .bootable = OFF_BOARD, |
629 | .extra = 48, | 592 | .extra = 48, |
593 | .udma_mask = 0x3f, /* udma0-5 */ | ||
630 | } | 594 | } |
631 | }; | 595 | }; |
632 | 596 | ||
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 061d300ab8be..8b219dd63024 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c | |||
@@ -106,68 +106,6 @@ | |||
106 | static int no_piix_dma; | 106 | static int no_piix_dma; |
107 | 107 | ||
108 | /** | 108 | /** |
109 | * piix_ratemask - compute rate mask for PIIX IDE | ||
110 | * @drive: IDE drive to compute for | ||
111 | * | ||
112 | * Returns the available modes for the PIIX IDE controller. | ||
113 | */ | ||
114 | |||
115 | static u8 piix_ratemask (ide_drive_t *drive) | ||
116 | { | ||
117 | struct pci_dev *dev = HWIF(drive)->pci_dev; | ||
118 | u8 mode; | ||
119 | |||
120 | switch(dev->device) { | ||
121 | case PCI_DEVICE_ID_INTEL_82801EB_1: | ||
122 | mode = 3; | ||
123 | break; | ||
124 | /* UDMA 100 capable */ | ||
125 | case PCI_DEVICE_ID_INTEL_82801BA_8: | ||
126 | case PCI_DEVICE_ID_INTEL_82801BA_9: | ||
127 | case PCI_DEVICE_ID_INTEL_82801CA_10: | ||
128 | case PCI_DEVICE_ID_INTEL_82801CA_11: | ||
129 | case PCI_DEVICE_ID_INTEL_82801E_11: | ||
130 | case PCI_DEVICE_ID_INTEL_82801DB_1: | ||
131 | case PCI_DEVICE_ID_INTEL_82801DB_10: | ||
132 | case PCI_DEVICE_ID_INTEL_82801DB_11: | ||
133 | case PCI_DEVICE_ID_INTEL_82801EB_11: | ||
134 | case PCI_DEVICE_ID_INTEL_ESB_2: | ||
135 | case PCI_DEVICE_ID_INTEL_ICH6_19: | ||
136 | case PCI_DEVICE_ID_INTEL_ICH7_21: | ||
137 | case PCI_DEVICE_ID_INTEL_ESB2_18: | ||
138 | case PCI_DEVICE_ID_INTEL_ICH8_6: | ||
139 | mode = 3; | ||
140 | break; | ||
141 | /* UDMA 66 capable */ | ||
142 | case PCI_DEVICE_ID_INTEL_82801AA_1: | ||
143 | case PCI_DEVICE_ID_INTEL_82372FB_1: | ||
144 | mode = 2; | ||
145 | break; | ||
146 | /* UDMA 33 capable */ | ||
147 | case PCI_DEVICE_ID_INTEL_82371AB: | ||
148 | case PCI_DEVICE_ID_INTEL_82443MX_1: | ||
149 | case PCI_DEVICE_ID_INTEL_82451NX: | ||
150 | case PCI_DEVICE_ID_INTEL_82801AB_1: | ||
151 | return 1; | ||
152 | /* Non UDMA capable (MWDMA2) */ | ||
153 | case PCI_DEVICE_ID_INTEL_82371SB_1: | ||
154 | case PCI_DEVICE_ID_INTEL_82371FB_1: | ||
155 | case PCI_DEVICE_ID_INTEL_82371FB_0: | ||
156 | case PCI_DEVICE_ID_INTEL_82371MX: | ||
157 | default: | ||
158 | return 0; | ||
159 | } | ||
160 | |||
161 | /* | ||
162 | * If we are UDMA66 capable fall back to UDMA33 | ||
163 | * if the drive cannot see an 80pin cable. | ||
164 | */ | ||
165 | if (!eighty_ninty_three(drive)) | ||
166 | mode = min_t(u8, mode, 1); | ||
167 | return mode; | ||
168 | } | ||
169 | |||
170 | /** | ||
171 | * piix_dma_2_pio - return the PIO mode matching DMA | 109 | * piix_dma_2_pio - return the PIO mode matching DMA |
172 | * @xfer_rate: transfer speed | 110 | * @xfer_rate: transfer speed |
173 | * | 111 | * |
@@ -301,7 +239,7 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
301 | ide_hwif_t *hwif = HWIF(drive); | 239 | ide_hwif_t *hwif = HWIF(drive); |
302 | struct pci_dev *dev = hwif->pci_dev; | 240 | struct pci_dev *dev = hwif->pci_dev; |
303 | u8 maslave = hwif->channel ? 0x42 : 0x40; | 241 | u8 maslave = hwif->channel ? 0x42 : 0x40; |
304 | u8 speed = ide_rate_filter(piix_ratemask(drive), xferspeed); | 242 | u8 speed = ide_rate_filter(drive, xferspeed); |
305 | int a_speed = 3 << (drive->dn * 4); | 243 | int a_speed = 3 << (drive->dn * 4); |
306 | int u_flag = 1 << drive->dn; | 244 | int u_flag = 1 << drive->dn; |
307 | int v_flag = 0x01 << drive->dn; | 245 | int v_flag = 0x01 << drive->dn; |
@@ -366,30 +304,6 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
366 | } | 304 | } |
367 | 305 | ||
368 | /** | 306 | /** |
369 | * piix_config_drive_for_dma - configure drive for DMA | ||
370 | * @drive: IDE drive to configure | ||
371 | * | ||
372 | * Set up a PIIX interface channel for the best available speed. | ||
373 | * We prefer UDMA if it is available and then MWDMA. If DMA is | ||
374 | * not available we switch to PIO and return 0. | ||
375 | */ | ||
376 | |||
377 | static int piix_config_drive_for_dma (ide_drive_t *drive) | ||
378 | { | ||
379 | u8 speed = ide_dma_speed(drive, piix_ratemask(drive)); | ||
380 | |||
381 | /* | ||
382 | * If no DMA speed was available or the chipset has DMA bugs | ||
383 | * then disable DMA and use PIO | ||
384 | */ | ||
385 | if (!speed) | ||
386 | return 0; | ||
387 | |||
388 | (void) piix_tune_chipset(drive, speed); | ||
389 | return ide_dma_enable(drive); | ||
390 | } | ||
391 | |||
392 | /** | ||
393 | * piix_config_drive_xfer_rate - set up an IDE device | 307 | * piix_config_drive_xfer_rate - set up an IDE device |
394 | * @drive: IDE drive to configure | 308 | * @drive: IDE drive to configure |
395 | * | 309 | * |
@@ -401,7 +315,7 @@ static int piix_config_drive_xfer_rate (ide_drive_t *drive) | |||
401 | { | 315 | { |
402 | drive->init_speed = 0; | 316 | drive->init_speed = 0; |
403 | 317 | ||
404 | if (ide_use_dma(drive) && piix_config_drive_for_dma(drive)) | 318 | if (ide_tune_dma(drive)) |
405 | return 0; | 319 | return 0; |
406 | 320 | ||
407 | if (ide_use_fast_pio(drive)) | 321 | if (ide_use_fast_pio(drive)) |
@@ -524,26 +438,14 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) | |||
524 | hwif->ide_dma_clear_irq = &piix_dma_clear_irq; | 438 | hwif->ide_dma_clear_irq = &piix_dma_clear_irq; |
525 | 439 | ||
526 | hwif->atapi_dma = 1; | 440 | hwif->atapi_dma = 1; |
527 | hwif->ultra_mask = 0x3f; | 441 | |
442 | hwif->ultra_mask = hwif->cds->udma_mask; | ||
528 | hwif->mwdma_mask = 0x06; | 443 | hwif->mwdma_mask = 0x06; |
529 | hwif->swdma_mask = 0x04; | 444 | hwif->swdma_mask = 0x04; |
530 | 445 | ||
531 | switch(hwif->pci_dev->device) { | 446 | if (hwif->ultra_mask & 0x78) { |
532 | case PCI_DEVICE_ID_INTEL_82371FB_0: | 447 | if (!hwif->udma_four) |
533 | case PCI_DEVICE_ID_INTEL_82371FB_1: | 448 | hwif->udma_four = piix_cable_detect(hwif); |
534 | case PCI_DEVICE_ID_INTEL_82371SB_1: | ||
535 | hwif->ultra_mask = 0x80; | ||
536 | break; | ||
537 | case PCI_DEVICE_ID_INTEL_82371AB: | ||
538 | case PCI_DEVICE_ID_INTEL_82443MX_1: | ||
539 | case PCI_DEVICE_ID_INTEL_82451NX: | ||
540 | case PCI_DEVICE_ID_INTEL_82801AB_1: | ||
541 | hwif->ultra_mask = 0x07; | ||
542 | break; | ||
543 | default: | ||
544 | if (!hwif->udma_four) | ||
545 | hwif->udma_four = piix_cable_detect(hwif); | ||
546 | break; | ||
547 | } | 449 | } |
548 | 450 | ||
549 | if (no_piix_dma) | 451 | if (no_piix_dma) |
@@ -557,7 +459,7 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) | |||
557 | hwif->drives[0].autodma = hwif->autodma; | 459 | hwif->drives[0].autodma = hwif->autodma; |
558 | } | 460 | } |
559 | 461 | ||
560 | #define DECLARE_PIIX_DEV(name_str) \ | 462 | #define DECLARE_PIIX_DEV(name_str, udma) \ |
561 | { \ | 463 | { \ |
562 | .name = name_str, \ | 464 | .name = name_str, \ |
563 | .init_chipset = init_chipset_piix, \ | 465 | .init_chipset = init_chipset_piix, \ |
@@ -566,11 +468,12 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) | |||
566 | .autodma = AUTODMA, \ | 468 | .autodma = AUTODMA, \ |
567 | .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ | 469 | .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ |
568 | .bootable = ON_BOARD, \ | 470 | .bootable = ON_BOARD, \ |
471 | .udma_mask = udma, \ | ||
569 | } | 472 | } |
570 | 473 | ||
571 | static ide_pci_device_t piix_pci_info[] __devinitdata = { | 474 | static ide_pci_device_t piix_pci_info[] __devinitdata = { |
572 | /* 0 */ DECLARE_PIIX_DEV("PIIXa"), | 475 | /* 0 */ DECLARE_PIIX_DEV("PIIXa", 0x00), /* no udma */ |
573 | /* 1 */ DECLARE_PIIX_DEV("PIIXb"), | 476 | /* 1 */ DECLARE_PIIX_DEV("PIIXb", 0x00), /* no udma */ |
574 | 477 | ||
575 | /* 2 */ | 478 | /* 2 */ |
576 | { /* | 479 | { /* |
@@ -587,28 +490,28 @@ static ide_pci_device_t piix_pci_info[] __devinitdata = { | |||
587 | .flags = IDEPCI_FLAG_ISA_PORTS | 490 | .flags = IDEPCI_FLAG_ISA_PORTS |
588 | }, | 491 | }, |
589 | 492 | ||
590 | /* 3 */ DECLARE_PIIX_DEV("PIIX3"), | 493 | /* 3 */ DECLARE_PIIX_DEV("PIIX3", 0x00), /* no udma */ |
591 | /* 4 */ DECLARE_PIIX_DEV("PIIX4"), | 494 | /* 4 */ DECLARE_PIIX_DEV("PIIX4", 0x07), /* udma0-2 */ |
592 | /* 5 */ DECLARE_PIIX_DEV("ICH0"), | 495 | /* 5 */ DECLARE_PIIX_DEV("ICH0", 0x07), /* udma0-2 */ |
593 | /* 6 */ DECLARE_PIIX_DEV("PIIX4"), | 496 | /* 6 */ DECLARE_PIIX_DEV("PIIX4", 0x07), /* udma0-2 */ |
594 | /* 7 */ DECLARE_PIIX_DEV("ICH"), | 497 | /* 7 */ DECLARE_PIIX_DEV("ICH", 0x1f), /* udma0-4 */ |
595 | /* 8 */ DECLARE_PIIX_DEV("PIIX4"), | 498 | /* 8 */ DECLARE_PIIX_DEV("PIIX4", 0x1f), /* udma0-4 */ |
596 | /* 9 */ DECLARE_PIIX_DEV("PIIX4"), | 499 | /* 9 */ DECLARE_PIIX_DEV("PIIX4", 0x07), /* udma0-2 */ |
597 | /* 10 */ DECLARE_PIIX_DEV("ICH2"), | 500 | /* 10 */ DECLARE_PIIX_DEV("ICH2", 0x3f), /* udma0-5 */ |
598 | /* 11 */ DECLARE_PIIX_DEV("ICH2M"), | 501 | /* 11 */ DECLARE_PIIX_DEV("ICH2M", 0x3f), /* udma0-5 */ |
599 | /* 12 */ DECLARE_PIIX_DEV("ICH3M"), | 502 | /* 12 */ DECLARE_PIIX_DEV("ICH3M", 0x3f), /* udma0-5 */ |
600 | /* 13 */ DECLARE_PIIX_DEV("ICH3"), | 503 | /* 13 */ DECLARE_PIIX_DEV("ICH3", 0x3f), /* udma0-5 */ |
601 | /* 14 */ DECLARE_PIIX_DEV("ICH4"), | 504 | /* 14 */ DECLARE_PIIX_DEV("ICH4", 0x3f), /* udma0-5 */ |
602 | /* 15 */ DECLARE_PIIX_DEV("ICH5"), | 505 | /* 15 */ DECLARE_PIIX_DEV("ICH5", 0x3f), /* udma0-5 */ |
603 | /* 16 */ DECLARE_PIIX_DEV("C-ICH"), | 506 | /* 16 */ DECLARE_PIIX_DEV("C-ICH", 0x3f), /* udma0-5 */ |
604 | /* 17 */ DECLARE_PIIX_DEV("ICH4"), | 507 | /* 17 */ DECLARE_PIIX_DEV("ICH4", 0x3f), /* udma0-5 */ |
605 | /* 18 */ DECLARE_PIIX_DEV("ICH5-SATA"), | 508 | /* 18 */ DECLARE_PIIX_DEV("ICH5-SATA", 0x3f), /* udma0-5 */ |
606 | /* 19 */ DECLARE_PIIX_DEV("ICH5"), | 509 | /* 19 */ DECLARE_PIIX_DEV("ICH5", 0x3f), /* udma0-5 */ |
607 | /* 20 */ DECLARE_PIIX_DEV("ICH6"), | 510 | /* 20 */ DECLARE_PIIX_DEV("ICH6", 0x3f), /* udma0-5 */ |
608 | /* 21 */ DECLARE_PIIX_DEV("ICH7"), | 511 | /* 21 */ DECLARE_PIIX_DEV("ICH7", 0x3f), /* udma0-5 */ |
609 | /* 22 */ DECLARE_PIIX_DEV("ICH4"), | 512 | /* 22 */ DECLARE_PIIX_DEV("ICH4", 0x3f), /* udma0-5 */ |
610 | /* 23 */ DECLARE_PIIX_DEV("ESB2"), | 513 | /* 23 */ DECLARE_PIIX_DEV("ESB2", 0x3f), /* udma0-5 */ |
611 | /* 24 */ DECLARE_PIIX_DEV("ICH8M"), | 514 | /* 24 */ DECLARE_PIIX_DEV("ICH8M", 0x3f), /* udma0-5 */ |
612 | }; | 515 | }; |
613 | 516 | ||
614 | /** | 517 | /** |
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index f84bf791f72e..cbf936325355 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c | |||
@@ -190,23 +190,6 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count) | |||
190 | } | 190 | } |
191 | 191 | ||
192 | /** | 192 | /** |
193 | * scc_ratemask - Compute available modes | ||
194 | * @drive: IDE drive | ||
195 | * | ||
196 | * Compute the available speeds for the devices on the interface. | ||
197 | * Enforce UDMA33 as a limit if there is no 80pin cable present. | ||
198 | */ | ||
199 | |||
200 | static u8 scc_ratemask(ide_drive_t *drive) | ||
201 | { | ||
202 | u8 mode = 4; | ||
203 | |||
204 | if (!eighty_ninty_three(drive)) | ||
205 | mode = min(mode, (u8)1); | ||
206 | return mode; | ||
207 | } | ||
208 | |||
209 | /** | ||
210 | * scc_tuneproc - tune a drive PIO mode | 193 | * scc_tuneproc - tune a drive PIO mode |
211 | * @drive: drive to tune | 194 | * @drive: drive to tune |
212 | * @mode_wanted: the target operating mode | 195 | * @mode_wanted: the target operating mode |
@@ -273,7 +256,7 @@ static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted) | |||
273 | static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed) | 256 | static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed) |
274 | { | 257 | { |
275 | ide_hwif_t *hwif = HWIF(drive); | 258 | ide_hwif_t *hwif = HWIF(drive); |
276 | u8 speed = ide_rate_filter(scc_ratemask(drive), xferspeed); | 259 | u8 speed = ide_rate_filter(drive, xferspeed); |
277 | struct scc_ports *ports = ide_get_hwifdata(hwif); | 260 | struct scc_ports *ports = ide_get_hwifdata(hwif); |
278 | unsigned long ctl_base = ports->ctl; | 261 | unsigned long ctl_base = ports->ctl; |
279 | unsigned long cckctrl_port = ctl_base + 0xff0; | 262 | unsigned long cckctrl_port = ctl_base + 0xff0; |
@@ -347,7 +330,7 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed) | |||
347 | 330 | ||
348 | static int scc_config_chipset_for_dma(ide_drive_t *drive) | 331 | static int scc_config_chipset_for_dma(ide_drive_t *drive) |
349 | { | 332 | { |
350 | u8 speed = ide_dma_speed(drive, scc_ratemask(drive)); | 333 | u8 speed = ide_max_dma_mode(drive); |
351 | 334 | ||
352 | if (!speed) | 335 | if (!speed) |
353 | return 0; | 336 | return 0; |
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index dbcd37a0c652..2fa6d92d16cc 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c | |||
@@ -65,16 +65,16 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list) | |||
65 | return 0; | 65 | return 0; |
66 | } | 66 | } |
67 | 67 | ||
68 | static u8 svwks_ratemask (ide_drive_t *drive) | 68 | static u8 svwks_udma_filter(ide_drive_t *drive) |
69 | { | 69 | { |
70 | struct pci_dev *dev = HWIF(drive)->pci_dev; | 70 | struct pci_dev *dev = HWIF(drive)->pci_dev; |
71 | u8 mode = 0; | 71 | u8 mask = 0; |
72 | 72 | ||
73 | if (!svwks_revision) | 73 | if (!svwks_revision) |
74 | pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); | 74 | pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); |
75 | 75 | ||
76 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) | 76 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) |
77 | return 2; | 77 | return 0x1f; |
78 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { | 78 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { |
79 | u32 reg = 0; | 79 | u32 reg = 0; |
80 | if (isa_dev) | 80 | if (isa_dev) |
@@ -86,25 +86,31 @@ static u8 svwks_ratemask (ide_drive_t *drive) | |||
86 | if(drive->media == ide_disk) | 86 | if(drive->media == ide_disk) |
87 | return 0; | 87 | return 0; |
88 | /* Check the OSB4 DMA33 enable bit */ | 88 | /* Check the OSB4 DMA33 enable bit */ |
89 | return ((reg & 0x00004000) == 0x00004000) ? 1 : 0; | 89 | return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0; |
90 | } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) { | 90 | } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) { |
91 | return 1; | 91 | return 0x07; |
92 | } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) { | 92 | } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) { |
93 | u8 btr = 0; | 93 | u8 btr = 0, mode; |
94 | pci_read_config_byte(dev, 0x5A, &btr); | 94 | pci_read_config_byte(dev, 0x5A, &btr); |
95 | mode = btr & 0x3; | 95 | mode = btr & 0x3; |
96 | if (!eighty_ninty_three(drive)) | 96 | |
97 | mode = min(mode, (u8)1); | ||
98 | /* If someone decides to do UDMA133 on CSB5 the same | 97 | /* If someone decides to do UDMA133 on CSB5 the same |
99 | issue will bite so be inclusive */ | 98 | issue will bite so be inclusive */ |
100 | if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100)) | 99 | if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100)) |
101 | mode = 2; | 100 | mode = 2; |
101 | |||
102 | switch(mode) { | ||
103 | case 2: mask = 0x1f; break; | ||
104 | case 1: mask = 0x07; break; | ||
105 | default: mask = 0x00; break; | ||
106 | } | ||
102 | } | 107 | } |
103 | if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || | 108 | if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || |
104 | (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && | 109 | (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && |
105 | (!(PCI_FUNC(dev->devfn) & 1))) | 110 | (!(PCI_FUNC(dev->devfn) & 1))) |
106 | mode = 2; | 111 | mask = 0x1f; |
107 | return mode; | 112 | |
113 | return mask; | ||
108 | } | 114 | } |
109 | 115 | ||
110 | static u8 svwks_csb_check (struct pci_dev *dev) | 116 | static u8 svwks_csb_check (struct pci_dev *dev) |
@@ -141,7 +147,7 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
141 | if (xferspeed == 255) /* PIO auto-tuning */ | 147 | if (xferspeed == 255) /* PIO auto-tuning */ |
142 | speed = XFER_PIO_0 + pio; | 148 | speed = XFER_PIO_0 + pio; |
143 | else | 149 | else |
144 | speed = ide_rate_filter(svwks_ratemask(drive), xferspeed); | 150 | speed = ide_rate_filter(drive, xferspeed); |
145 | 151 | ||
146 | /* If we are about to put a disk into UDMA mode we screwed up. | 152 | /* If we are about to put a disk into UDMA mode we screwed up. |
147 | Our code assumes we never _ever_ do this on an OSB4 */ | 153 | Our code assumes we never _ever_ do this on an OSB4 */ |
@@ -304,7 +310,7 @@ static void svwks_tune_drive (ide_drive_t *drive, u8 pio) | |||
304 | 310 | ||
305 | static int config_chipset_for_dma (ide_drive_t *drive) | 311 | static int config_chipset_for_dma (ide_drive_t *drive) |
306 | { | 312 | { |
307 | u8 speed = ide_dma_speed(drive, svwks_ratemask(drive)); | 313 | u8 speed = ide_max_dma_mode(drive); |
308 | 314 | ||
309 | if (!(speed)) | 315 | if (!(speed)) |
310 | speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); | 316 | speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); |
@@ -500,6 +506,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) | |||
500 | 506 | ||
501 | hwif->tuneproc = &svwks_tune_drive; | 507 | hwif->tuneproc = &svwks_tune_drive; |
502 | hwif->speedproc = &svwks_tune_chipset; | 508 | hwif->speedproc = &svwks_tune_chipset; |
509 | hwif->udma_filter = &svwks_udma_filter; | ||
503 | 510 | ||
504 | hwif->atapi_dma = 1; | 511 | hwif->atapi_dma = 1; |
505 | 512 | ||
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index fd09b295a69d..d3185e29a38e 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c | |||
@@ -692,7 +692,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) | |||
692 | return -EIO; | 692 | return -EIO; |
693 | 693 | ||
694 | /* Create /proc/ide entries */ | 694 | /* Create /proc/ide entries */ |
695 | create_proc_ide_interfaces(); | 695 | ide_proc_register_port(hwif); |
696 | 696 | ||
697 | return 0; | 697 | return 0; |
698 | } | 698 | } |
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 79cec50a242f..d09e74c2996e 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c | |||
@@ -122,45 +122,41 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) | |||
122 | } | 122 | } |
123 | 123 | ||
124 | /** | 124 | /** |
125 | * siimage_ratemask - Compute available modes | 125 | * sil_udma_filter - compute UDMA mask |
126 | * @drive: IDE drive | 126 | * @drive: IDE device |
127 | * | ||
128 | * Compute the available UDMA speeds for the device on the interface. | ||
127 | * | 129 | * |
128 | * Compute the available speeds for the devices on the interface. | ||
129 | * For the CMD680 this depends on the clocking mode (scsc), for the | 130 | * For the CMD680 this depends on the clocking mode (scsc), for the |
130 | * SI3312 SATA controller life is a bit simpler. Enforce UDMA33 | 131 | * SI3112 SATA controller life is a bit simpler. |
131 | * as a limit if there is no 80pin cable present. | ||
132 | */ | 132 | */ |
133 | 133 | ||
134 | static byte siimage_ratemask (ide_drive_t *drive) | 134 | static u8 sil_udma_filter(ide_drive_t *drive) |
135 | { | 135 | { |
136 | ide_hwif_t *hwif = HWIF(drive); | 136 | ide_hwif_t *hwif = drive->hwif; |
137 | u8 mode = 0, scsc = 0; | ||
138 | unsigned long base = (unsigned long) hwif->hwif_data; | 137 | unsigned long base = (unsigned long) hwif->hwif_data; |
138 | u8 mask = 0, scsc = 0; | ||
139 | 139 | ||
140 | if (hwif->mmio) | 140 | if (hwif->mmio) |
141 | scsc = hwif->INB(base + 0x4A); | 141 | scsc = hwif->INB(base + 0x4A); |
142 | else | 142 | else |
143 | pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc); | 143 | pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc); |
144 | 144 | ||
145 | if(is_sata(hwif)) | 145 | if (is_sata(hwif)) { |
146 | { | 146 | mask = strstr(drive->id->model, "Maxtor") ? 0x3f : 0x7f; |
147 | if(strstr(drive->id->model, "Maxtor")) | 147 | goto out; |
148 | return 3; | ||
149 | return 4; | ||
150 | } | 148 | } |
151 | 149 | ||
152 | if ((scsc & 0x30) == 0x10) /* 133 */ | 150 | if ((scsc & 0x30) == 0x10) /* 133 */ |
153 | mode = 4; | 151 | mask = 0x7f; |
154 | else if ((scsc & 0x30) == 0x20) /* 2xPCI */ | 152 | else if ((scsc & 0x30) == 0x20) /* 2xPCI */ |
155 | mode = 4; | 153 | mask = 0x7f; |
156 | else if ((scsc & 0x30) == 0x00) /* 100 */ | 154 | else if ((scsc & 0x30) == 0x00) /* 100 */ |
157 | mode = 3; | 155 | mask = 0x3f; |
158 | else /* Disabled ? */ | 156 | else /* Disabled ? */ |
159 | BUG(); | 157 | BUG(); |
160 | 158 | out: | |
161 | if (!eighty_ninty_three(drive)) | 159 | return mask; |
162 | mode = min(mode, (u8)1); | ||
163 | return mode; | ||
164 | } | 160 | } |
165 | 161 | ||
166 | /** | 162 | /** |
@@ -306,7 +302,7 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) | |||
306 | ide_hwif_t *hwif = HWIF(drive); | 302 | ide_hwif_t *hwif = HWIF(drive); |
307 | u16 ultra = 0, multi = 0; | 303 | u16 ultra = 0, multi = 0; |
308 | u8 mode = 0, unit = drive->select.b.unit; | 304 | u8 mode = 0, unit = drive->select.b.unit; |
309 | u8 speed = ide_rate_filter(siimage_ratemask(drive), xferspeed); | 305 | u8 speed = ide_rate_filter(drive, xferspeed); |
310 | unsigned long base = (unsigned long)hwif->hwif_data; | 306 | unsigned long base = (unsigned long)hwif->hwif_data; |
311 | u8 scsc = 0, addr_mask = ((hwif->channel) ? | 307 | u8 scsc = 0, addr_mask = ((hwif->channel) ? |
312 | ((hwif->mmio) ? 0xF4 : 0x84) : | 308 | ((hwif->mmio) ? 0xF4 : 0x84) : |
@@ -389,7 +385,7 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) | |||
389 | 385 | ||
390 | static int config_chipset_for_dma (ide_drive_t *drive) | 386 | static int config_chipset_for_dma (ide_drive_t *drive) |
391 | { | 387 | { |
392 | u8 speed = ide_dma_speed(drive, siimage_ratemask(drive)); | 388 | u8 speed = ide_max_dma_mode(drive); |
393 | 389 | ||
394 | if (!speed) | 390 | if (!speed) |
395 | return 0; | 391 | return 0; |
@@ -989,6 +985,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) | |||
989 | hwif->tuneproc = &siimage_tuneproc; | 985 | hwif->tuneproc = &siimage_tuneproc; |
990 | hwif->reset_poll = &siimage_reset_poll; | 986 | hwif->reset_poll = &siimage_reset_poll; |
991 | hwif->pre_reset = &siimage_pre_reset; | 987 | hwif->pre_reset = &siimage_pre_reset; |
988 | hwif->udma_filter = &sil_udma_filter; | ||
992 | 989 | ||
993 | if(is_sata(hwif)) { | 990 | if(is_sata(hwif)) { |
994 | static int first = 1; | 991 | static int first = 1; |
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 2ba0669f36a1..2bde1b92784a 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c | |||
@@ -191,7 +191,7 @@ static char* chipset_capability[] = { | |||
191 | "ATA 133 (1st gen)", "ATA 133 (2nd gen)" | 191 | "ATA 133 (1st gen)", "ATA 133 (2nd gen)" |
192 | }; | 192 | }; |
193 | 193 | ||
194 | #if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) | 194 | #if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_IDE_PROC_FS) |
195 | #include <linux/stat.h> | 195 | #include <linux/stat.h> |
196 | #include <linux/proc_fs.h> | 196 | #include <linux/proc_fs.h> |
197 | 197 | ||
@@ -426,17 +426,7 @@ static int sis_get_info (char *buffer, char **addr, off_t offset, int count) | |||
426 | 426 | ||
427 | return len > count ? count : len; | 427 | return len > count ? count : len; |
428 | } | 428 | } |
429 | #endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) */ | 429 | #endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */ |
430 | |||
431 | static u8 sis5513_ratemask (ide_drive_t *drive) | ||
432 | { | ||
433 | u8 rates[] = { 0, 0, 1, 2, 3, 3, 4, 4 }; | ||
434 | u8 mode = rates[chipset_family]; | ||
435 | |||
436 | if (!eighty_ninty_three(drive)) | ||
437 | mode = min(mode, (u8)1); | ||
438 | return mode; | ||
439 | } | ||
440 | 430 | ||
441 | /* | 431 | /* |
442 | * Configuration functions | 432 | * Configuration functions |
@@ -563,7 +553,7 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
563 | u8 drive_pci, reg, speed; | 553 | u8 drive_pci, reg, speed; |
564 | u32 regdw; | 554 | u32 regdw; |
565 | 555 | ||
566 | speed = ide_rate_filter(sis5513_ratemask(drive), xferspeed); | 556 | speed = ide_rate_filter(drive, xferspeed); |
567 | 557 | ||
568 | /* See config_art_rwp_pio for drive pci config registers */ | 558 | /* See config_art_rwp_pio for drive pci config registers */ |
569 | drive_pci = 0x40; | 559 | drive_pci = 0x40; |
@@ -648,32 +638,13 @@ static void sis5513_tune_drive (ide_drive_t *drive, u8 pio) | |||
648 | (void) config_chipset_for_pio(drive, pio); | 638 | (void) config_chipset_for_pio(drive, pio); |
649 | } | 639 | } |
650 | 640 | ||
651 | /* | ||
652 | * ((id->hw_config & 0x4000|0x2000) && (HWIF(drive)->udma_four)) | ||
653 | */ | ||
654 | static int config_chipset_for_dma (ide_drive_t *drive) | ||
655 | { | ||
656 | u8 speed = ide_dma_speed(drive, sis5513_ratemask(drive)); | ||
657 | |||
658 | #ifdef DEBUG | ||
659 | printk("SIS5513: config_chipset_for_dma, drive %d, ultra %x\n", | ||
660 | drive->dn, drive->id->dma_ultra); | ||
661 | #endif | ||
662 | |||
663 | if (!(speed)) | ||
664 | return 0; | ||
665 | |||
666 | sis5513_tune_chipset(drive, speed); | ||
667 | return ide_dma_enable(drive); | ||
668 | } | ||
669 | |||
670 | static int sis5513_config_xfer_rate(ide_drive_t *drive) | 641 | static int sis5513_config_xfer_rate(ide_drive_t *drive) |
671 | { | 642 | { |
672 | config_art_rwp_pio(drive, 5); | 643 | config_art_rwp_pio(drive, 5); |
673 | 644 | ||
674 | drive->init_speed = 0; | 645 | drive->init_speed = 0; |
675 | 646 | ||
676 | if (ide_use_dma(drive) && config_chipset_for_dma(drive)) | 647 | if (ide_tune_dma(drive)) |
677 | return 0; | 648 | return 0; |
678 | 649 | ||
679 | if (ide_use_fast_pio(drive)) | 650 | if (ide_use_fast_pio(drive)) |
@@ -826,7 +797,7 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c | |||
826 | break; | 797 | break; |
827 | } | 798 | } |
828 | 799 | ||
829 | #if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) | 800 | #if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_IDE_PROC_FS) |
830 | if (!sis_proc) { | 801 | if (!sis_proc) { |
831 | sis_proc = 1; | 802 | sis_proc = 1; |
832 | bmide_dev = dev; | 803 | bmide_dev = dev; |
@@ -858,6 +829,8 @@ static unsigned int __devinit ata66_sis5513 (ide_hwif_t *hwif) | |||
858 | 829 | ||
859 | static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) | 830 | static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) |
860 | { | 831 | { |
832 | u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; | ||
833 | |||
861 | hwif->autodma = 0; | 834 | hwif->autodma = 0; |
862 | 835 | ||
863 | if (!hwif->irq) | 836 | if (!hwif->irq) |
@@ -873,7 +846,8 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) | |||
873 | } | 846 | } |
874 | 847 | ||
875 | hwif->atapi_dma = 1; | 848 | hwif->atapi_dma = 1; |
876 | hwif->ultra_mask = 0x7f; | 849 | |
850 | hwif->ultra_mask = udma_rates[chipset_family]; | ||
877 | hwif->mwdma_mask = 0x07; | 851 | hwif->mwdma_mask = 0x07; |
878 | hwif->swdma_mask = 0x07; | 852 | hwif->swdma_mask = 0x07; |
879 | 853 | ||
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index 852ccb36da1d..c40f291f91e0 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c | |||
@@ -21,15 +21,6 @@ | |||
21 | 21 | ||
22 | #include <asm/io.h> | 22 | #include <asm/io.h> |
23 | 23 | ||
24 | static u8 slc90e66_ratemask (ide_drive_t *drive) | ||
25 | { | ||
26 | u8 mode = 2; | ||
27 | |||
28 | if (!eighty_ninty_three(drive)) | ||
29 | mode = min_t(u8, mode, 1); | ||
30 | return mode; | ||
31 | } | ||
32 | |||
33 | static u8 slc90e66_dma_2_pio (u8 xfer_rate) { | 24 | static u8 slc90e66_dma_2_pio (u8 xfer_rate) { |
34 | switch(xfer_rate) { | 25 | switch(xfer_rate) { |
35 | case XFER_UDMA_4: | 26 | case XFER_UDMA_4: |
@@ -122,7 +113,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
122 | ide_hwif_t *hwif = HWIF(drive); | 113 | ide_hwif_t *hwif = HWIF(drive); |
123 | struct pci_dev *dev = hwif->pci_dev; | 114 | struct pci_dev *dev = hwif->pci_dev; |
124 | u8 maslave = hwif->channel ? 0x42 : 0x40; | 115 | u8 maslave = hwif->channel ? 0x42 : 0x40; |
125 | u8 speed = ide_rate_filter(slc90e66_ratemask(drive), xferspeed); | 116 | u8 speed = ide_rate_filter(drive, xferspeed); |
126 | int sitre = 0, a_speed = 7 << (drive->dn * 4); | 117 | int sitre = 0, a_speed = 7 << (drive->dn * 4); |
127 | int u_speed = 0, u_flag = 1 << drive->dn; | 118 | int u_speed = 0, u_flag = 1 << drive->dn; |
128 | u16 reg4042, reg44, reg48, reg4a; | 119 | u16 reg4042, reg44, reg48, reg4a; |
@@ -169,22 +160,11 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
169 | return ide_config_drive_speed(drive, speed); | 160 | return ide_config_drive_speed(drive, speed); |
170 | } | 161 | } |
171 | 162 | ||
172 | static int slc90e66_config_drive_for_dma (ide_drive_t *drive) | ||
173 | { | ||
174 | u8 speed = ide_dma_speed(drive, slc90e66_ratemask(drive)); | ||
175 | |||
176 | if (!speed) | ||
177 | return 0; | ||
178 | |||
179 | (void) slc90e66_tune_chipset(drive, speed); | ||
180 | return ide_dma_enable(drive); | ||
181 | } | ||
182 | |||
183 | static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive) | 163 | static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive) |
184 | { | 164 | { |
185 | drive->init_speed = 0; | 165 | drive->init_speed = 0; |
186 | 166 | ||
187 | if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive)) | 167 | if (ide_tune_dma(drive)) |
188 | return 0; | 168 | return 0; |
189 | 169 | ||
190 | if (ide_use_fast_pio(drive)) | 170 | if (ide_use_fast_pio(drive)) |
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index 0b6d81d6ce48..cee619bb2eaf 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c | |||
@@ -13,18 +13,13 @@ | |||
13 | #include <linux/pci.h> | 13 | #include <linux/pci.h> |
14 | #include <linux/ide.h> | 14 | #include <linux/ide.h> |
15 | 15 | ||
16 | static inline u8 tc86c001_ratemask(ide_drive_t *drive) | ||
17 | { | ||
18 | return eighty_ninty_three(drive) ? 2 : 1; | ||
19 | } | ||
20 | |||
21 | static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed) | 16 | static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed) |
22 | { | 17 | { |
23 | ide_hwif_t *hwif = HWIF(drive); | 18 | ide_hwif_t *hwif = HWIF(drive); |
24 | unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); | 19 | unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); |
25 | u16 mode, scr = hwif->INW(scr_port); | 20 | u16 mode, scr = hwif->INW(scr_port); |
26 | 21 | ||
27 | speed = ide_rate_filter(tc86c001_ratemask(drive), speed); | 22 | speed = ide_rate_filter(drive, speed); |
28 | 23 | ||
29 | switch (speed) { | 24 | switch (speed) { |
30 | case XFER_UDMA_4: mode = 0x00c0; break; | 25 | case XFER_UDMA_4: mode = 0x00c0; break; |
@@ -172,20 +167,9 @@ static int tc86c001_busproc(ide_drive_t *drive, int state) | |||
172 | return 0; | 167 | return 0; |
173 | } | 168 | } |
174 | 169 | ||
175 | static int config_chipset_for_dma(ide_drive_t *drive) | ||
176 | { | ||
177 | u8 speed = ide_dma_speed(drive, tc86c001_ratemask(drive)); | ||
178 | |||
179 | if (!speed) | ||
180 | return 0; | ||
181 | |||
182 | (void) tc86c001_tune_chipset(drive, speed); | ||
183 | return ide_dma_enable(drive); | ||
184 | } | ||
185 | |||
186 | static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive) | 170 | static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive) |
187 | { | 171 | { |
188 | if (ide_use_dma(drive) && config_chipset_for_dma(drive)) | 172 | if (ide_tune_dma(drive)) |
189 | return 0; | 173 | return 0; |
190 | 174 | ||
191 | if (ide_use_fast_pio(drive)) | 175 | if (ide_use_fast_pio(drive)) |
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index 5e06179c3469..35e8c612638f 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c | |||
@@ -48,7 +48,7 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed) | |||
48 | u16 timing = 0; | 48 | u16 timing = 0; |
49 | u32 triflex_timings = 0; | 49 | u32 triflex_timings = 0; |
50 | u8 unit = (drive->select.b.unit & 0x01); | 50 | u8 unit = (drive->select.b.unit & 0x01); |
51 | u8 speed = ide_rate_filter(0, xferspeed); | 51 | u8 speed = ide_rate_filter(drive, xferspeed); |
52 | 52 | ||
53 | pci_read_config_dword(dev, channel_offset, &triflex_timings); | 53 | pci_read_config_dword(dev, channel_offset, &triflex_timings); |
54 | 54 | ||
@@ -100,20 +100,9 @@ static void triflex_tune_drive(ide_drive_t *drive, u8 pio) | |||
100 | (void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio)); | 100 | (void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio)); |
101 | } | 101 | } |
102 | 102 | ||
103 | static int triflex_config_drive_for_dma(ide_drive_t *drive) | ||
104 | { | ||
105 | int speed = ide_dma_speed(drive, 0); /* No ultra speeds */ | ||
106 | |||
107 | if (!speed) | ||
108 | return 0; | ||
109 | |||
110 | (void) triflex_tune_chipset(drive, speed); | ||
111 | return ide_dma_enable(drive); | ||
112 | } | ||
113 | |||
114 | static int triflex_config_drive_xfer_rate(ide_drive_t *drive) | 103 | static int triflex_config_drive_xfer_rate(ide_drive_t *drive) |
115 | { | 104 | { |
116 | if (ide_use_dma(drive) && triflex_config_drive_for_dma(drive)) | 105 | if (ide_tune_dma(drive)) |
117 | return 0; | 106 | return 0; |
118 | 107 | ||
119 | triflex_tune_drive(drive, 255); | 108 | triflex_tune_drive(drive, 255); |
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index a49ebe44babd..45fc36f0f219 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c | |||
@@ -1276,6 +1276,8 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) | |||
1276 | /* We probe the hwif now */ | 1276 | /* We probe the hwif now */ |
1277 | probe_hwif_init(hwif); | 1277 | probe_hwif_init(hwif); |
1278 | 1278 | ||
1279 | ide_proc_register_port(hwif); | ||
1280 | |||
1279 | return 0; | 1281 | return 0; |
1280 | } | 1282 | } |
1281 | 1283 | ||
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 118fb3205ca8..67035ba4bf5e 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c | |||
@@ -702,6 +702,7 @@ out: | |||
702 | 702 | ||
703 | int ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d) | 703 | int ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d) |
704 | { | 704 | { |
705 | ide_hwif_t *hwif = NULL, *mate = NULL; | ||
705 | ata_index_t index_list; | 706 | ata_index_t index_list; |
706 | int ret; | 707 | int ret; |
707 | 708 | ||
@@ -710,11 +711,19 @@ int ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d) | |||
710 | goto out; | 711 | goto out; |
711 | 712 | ||
712 | if ((index_list.b.low & 0xf0) != 0xf0) | 713 | if ((index_list.b.low & 0xf0) != 0xf0) |
713 | probe_hwif_init_with_fixup(&ide_hwifs[index_list.b.low], d->fixup); | 714 | hwif = &ide_hwifs[index_list.b.low]; |
714 | if ((index_list.b.high & 0xf0) != 0xf0) | 715 | if ((index_list.b.high & 0xf0) != 0xf0) |
715 | probe_hwif_init_with_fixup(&ide_hwifs[index_list.b.high], d->fixup); | 716 | mate = &ide_hwifs[index_list.b.high]; |
716 | 717 | ||
717 | create_proc_ide_interfaces(); | 718 | if (hwif) |
719 | probe_hwif_init_with_fixup(hwif, d->fixup); | ||
720 | if (mate) | ||
721 | probe_hwif_init_with_fixup(mate, d->fixup); | ||
722 | |||
723 | if (hwif) | ||
724 | ide_proc_register_port(hwif); | ||
725 | if (mate) | ||
726 | ide_proc_register_port(mate); | ||
718 | out: | 727 | out: |
719 | return ret; | 728 | return ret; |
720 | } | 729 | } |
@@ -748,13 +757,22 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, | |||
748 | } | 757 | } |
749 | } | 758 | } |
750 | 759 | ||
751 | create_proc_ide_interfaces(); | 760 | for (i = 0; i < 2; i++) { |
761 | u8 idx[2] = { index_list[i].b.low, index_list[i].b.high }; | ||
762 | int j; | ||
763 | |||
764 | for (j = 0; j < 2; j++) { | ||
765 | if ((idx[j] & 0xf0) != 0xf0) | ||
766 | ide_proc_register_port(ide_hwifs + idx[j]); | ||
767 | } | ||
768 | } | ||
752 | out: | 769 | out: |
753 | return ret; | 770 | return ret; |
754 | } | 771 | } |
755 | 772 | ||
756 | EXPORT_SYMBOL_GPL(ide_setup_pci_devices); | 773 | EXPORT_SYMBOL_GPL(ide_setup_pci_devices); |
757 | 774 | ||
775 | #ifdef CONFIG_IDEPCI_PCIBUS_ORDER | ||
758 | /* | 776 | /* |
759 | * Module interfaces | 777 | * Module interfaces |
760 | */ | 778 | */ |
@@ -861,3 +879,4 @@ void __init ide_scan_pcibus (int scan_direction) | |||
861 | __pci_register_driver(d, d->driver.owner, d->driver.mod_name); | 879 | __pci_register_driver(d, d->driver.owner, d->driver.mod_name); |
862 | } | 880 | } |
863 | } | 881 | } |
882 | #endif | ||
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 0acf2f7fd9d7..c803d2bba65d 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c | |||
@@ -563,7 +563,7 @@ static void media_bay_step(int i) | |||
563 | ide_init_hwif_ports(&hw, (unsigned long) bay->cd_base, (unsigned long) 0, NULL); | 563 | ide_init_hwif_ports(&hw, (unsigned long) bay->cd_base, (unsigned long) 0, NULL); |
564 | hw.irq = bay->cd_irq; | 564 | hw.irq = bay->cd_irq; |
565 | hw.chipset = ide_pmac; | 565 | hw.chipset = ide_pmac; |
566 | bay->cd_index = ide_register_hw(&hw, NULL); | 566 | bay->cd_index = ide_register_hw(&hw, 0, NULL); |
567 | pmu_resume(); | 567 | pmu_resume(); |
568 | } | 568 | } |
569 | if (bay->cd_index == -1) { | 569 | if (bay->cd_index == -1) { |
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 2b5b8a93bc10..8263f752809d 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c | |||
@@ -721,19 +721,23 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r | |||
721 | return ide_stopped; | 721 | return ide_stopped; |
722 | } | 722 | } |
723 | 723 | ||
724 | #ifdef CONFIG_IDE_PROC_FS | ||
724 | static void idescsi_add_settings(ide_drive_t *drive) | 725 | static void idescsi_add_settings(ide_drive_t *drive) |
725 | { | 726 | { |
726 | idescsi_scsi_t *scsi = drive_to_idescsi(drive); | 727 | idescsi_scsi_t *scsi = drive_to_idescsi(drive); |
727 | 728 | ||
728 | /* | 729 | /* |
729 | * drive setting name read/write ioctl ioctl data type min max mul_factor div_factor data pointer set function | 730 | * drive setting name read/write data type min max mul_factor div_factor data pointer set function |
730 | */ | 731 | */ |
731 | ide_add_setting(drive, "bios_cyl", SETTING_RW, -1, -1, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); | 732 | ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); |
732 | ide_add_setting(drive, "bios_head", SETTING_RW, -1, -1, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); | 733 | ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); |
733 | ide_add_setting(drive, "bios_sect", SETTING_RW, -1, -1, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); | 734 | ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); |
734 | ide_add_setting(drive, "transform", SETTING_RW, -1, -1, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL); | 735 | ide_add_setting(drive, "transform", SETTING_RW, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL); |
735 | ide_add_setting(drive, "log", SETTING_RW, -1, -1, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL); | 736 | ide_add_setting(drive, "log", SETTING_RW, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL); |
736 | } | 737 | } |
738 | #else | ||
739 | static inline void idescsi_add_settings(ide_drive_t *drive) { ; } | ||
740 | #endif | ||
737 | 741 | ||
738 | /* | 742 | /* |
739 | * Driver initialization. | 743 | * Driver initialization. |
@@ -756,7 +760,7 @@ static void ide_scsi_remove(ide_drive_t *drive) | |||
756 | struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost); | 760 | struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost); |
757 | struct gendisk *g = scsi->disk; | 761 | struct gendisk *g = scsi->disk; |
758 | 762 | ||
759 | ide_unregister_subdriver(drive, scsi->driver); | 763 | ide_proc_unregister_driver(drive, scsi->driver); |
760 | 764 | ||
761 | ide_unregister_region(g); | 765 | ide_unregister_region(g); |
762 | 766 | ||
@@ -770,13 +774,11 @@ static void ide_scsi_remove(ide_drive_t *drive) | |||
770 | 774 | ||
771 | static int ide_scsi_probe(ide_drive_t *); | 775 | static int ide_scsi_probe(ide_drive_t *); |
772 | 776 | ||
773 | #ifdef CONFIG_PROC_FS | 777 | #ifdef CONFIG_IDE_PROC_FS |
774 | static ide_proc_entry_t idescsi_proc[] = { | 778 | static ide_proc_entry_t idescsi_proc[] = { |
775 | { "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL }, | 779 | { "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL }, |
776 | { NULL, 0, NULL, NULL } | 780 | { NULL, 0, NULL, NULL } |
777 | }; | 781 | }; |
778 | #else | ||
779 | # define idescsi_proc NULL | ||
780 | #endif | 782 | #endif |
781 | 783 | ||
782 | static ide_driver_t idescsi_driver = { | 784 | static ide_driver_t idescsi_driver = { |
@@ -790,11 +792,13 @@ static ide_driver_t idescsi_driver = { | |||
790 | .version = IDESCSI_VERSION, | 792 | .version = IDESCSI_VERSION, |
791 | .media = ide_scsi, | 793 | .media = ide_scsi, |
792 | .supports_dsc_overlap = 0, | 794 | .supports_dsc_overlap = 0, |
793 | .proc = idescsi_proc, | ||
794 | .do_request = idescsi_do_request, | 795 | .do_request = idescsi_do_request, |
795 | .end_request = idescsi_end_request, | 796 | .end_request = idescsi_end_request, |
796 | .error = idescsi_atapi_error, | 797 | .error = idescsi_atapi_error, |
797 | .abort = idescsi_atapi_abort, | 798 | .abort = idescsi_atapi_abort, |
799 | #ifdef CONFIG_IDE_PROC_FS | ||
800 | .proc = idescsi_proc, | ||
801 | #endif | ||
798 | }; | 802 | }; |
799 | 803 | ||
800 | static int idescsi_ide_open(struct inode *inode, struct file *filp) | 804 | static int idescsi_ide_open(struct inode *inode, struct file *filp) |
@@ -1153,7 +1157,7 @@ static int ide_scsi_probe(ide_drive_t *drive) | |||
1153 | idescsi->host = host; | 1157 | idescsi->host = host; |
1154 | idescsi->disk = g; | 1158 | idescsi->disk = g; |
1155 | g->private_data = &idescsi->driver; | 1159 | g->private_data = &idescsi->driver; |
1156 | ide_register_subdriver(drive, &idescsi_driver); | 1160 | ide_proc_register_driver(drive, &idescsi_driver); |
1157 | err = 0; | 1161 | err = 0; |
1158 | idescsi_setup(drive, idescsi); | 1162 | idescsi_setup(drive, idescsi); |
1159 | g->fops = &idescsi_ops; | 1163 | g->fops = &idescsi_ops; |
@@ -1165,7 +1169,7 @@ static int ide_scsi_probe(ide_drive_t *drive) | |||
1165 | } | 1169 | } |
1166 | /* fall through on error */ | 1170 | /* fall through on error */ |
1167 | ide_unregister_region(g); | 1171 | ide_unregister_region(g); |
1168 | ide_unregister_subdriver(drive, &idescsi_driver); | 1172 | ide_proc_unregister_driver(drive, &idescsi_driver); |
1169 | 1173 | ||
1170 | put_disk(g); | 1174 | put_disk(g); |
1171 | out_host_put: | 1175 | out_host_put: |