Merge commit 'v2.6.27-rc6' into x86/memory-corruption-check

14 files changed, 100 insertions, 64 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ae8494944c45..11c8c19f0fb7 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -448,8 +448,10 @@ config PATA_MARVELL
         tristate "Marvell PATA support via legacy mode"
         depends on PCI
         help
-          This option enables limited support for the Marvell 88SE6145 ATA
-          controller.
+          This option enables limited support for the Marvell 88SE61xx ATA
+          controllers. If you wish to use only the SATA ports then select
+          the AHCI driver alone. If you wish to the use the PATA port or
+          both SATA and PATA include this driver.
 
           If unsure, say N.
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c729e6988bbb..2e1a7cb2ed5f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
         /* board_ahci_mv */
         {
                 AHCI_HFLAGS     (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
-                                 AHCI_HFLAG_MV_PATA),
+                                 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
                 .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
                                   ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
                 .pio_mask       = 0x1f, /* pio0-4 */
@@ -487,7 +487,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
         { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
         { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
         { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+        { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
         { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+        { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
 
         /* JMicron 360/1/3/5/6, match class to avoid IDE function */
         { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -610,6 +612,15 @@ module_param(ahci_em_messages, int, 0444);
 MODULE_PARM_DESC(ahci_em_messages,
         "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
 
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
 static inline int ahci_nr_ports(u32 cap)
 {
         return (cap & 0x1f) + 1;
@@ -732,6 +743,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
                            "MV_AHCI HACK: port_map %x -> %x\n",
                            port_map,
                            port_map & mv);
+                dev_printk(KERN_ERR, &pdev->dev,
+                          "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
 
                 port_map &= mv;
         }
@@ -2533,6 +2546,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         if (!printed_version++)
                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+        /* The AHCI driver can only drive the SATA ports, the PATA driver
+           can drive them all so if both drivers are selected make sure
+           AHCI stays out of the way */
+        if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+                return -ENODEV;
+
         /* acquire resources */
         rc = pcim_enable_device(pdev);
         if (rc)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 304fdc6f1dc2..2a4c516894f0 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1315,11 +1315,6 @@ fsm_start:
                 break;
 
         case HSM_ST_ERR:
-                /* make sure qc->err_mask is available to
-                 * know what's wrong and recover
-                 */
-                WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)));
-
                 ap->hsm_task_state = HSM_ST_IDLE;
 
                 /* complete taskfile transaction */
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 24a011b25024..0d87eec84966 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,29 +20,30 @@
 #include <linux/ata.h>
 
 #define DRV_NAME        "pata_marvell"
-#define DRV_VERSION     "0.1.4"
+#define DRV_VERSION     "0.1.6"
 
 /**
- *      marvell_pre_reset       -       check for 40/80 pin
- *      @link: link
- *      @deadline: deadline jiffies for the operation
+ *      marvell_pata_active     -       check if PATA is active
+ *      @pdev: PCI device
  *
- *      Perform the PATA port setup we need.
+ *      Returns 1 if the PATA port may be active. We know how to check this
+ *      for the 6145 but not the other devices
  */
 
-static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+static int marvell_pata_active(struct pci_dev *pdev)
 {
-        struct ata_port *ap = link->ap;
-        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        int i;
         u32 devices;
         void __iomem *barp;
-        int i;
 
-        /* Check if our port is enabled */
+        /* We don't yet know how to do this for other devices */
+        if (pdev->device != 0x6145)
+                return 1;       
 
         barp = pci_iomap(pdev, 5, 0x10);
         if (barp == NULL)
                 return -ENOMEM;
+
         printk("BAR5:");
         for(i = 0; i <= 0x0F; i++)
                 printk("%02X:%02X ", i, ioread8(barp + i));
@@ -51,9 +52,27 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
         devices = ioread32(barp + 0x0C);
         pci_iounmap(pdev, barp);
 
-        if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
-            (!(devices & 0x10)))        /* PATA enable ? */
-                return -ENOENT;
+        if (devices & 0x10)
+                return 1;
+        return 0;
+}
+
+/**
+ *      marvell_pre_reset       -       check for 40/80 pin
+ *      @link: link
+ *      @deadline: deadline jiffies for the operation
+ *
+ *      Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+        struct ata_port *ap = link->ap;
+        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+        if (pdev->device == 0x6145 && ap->port_no == 0 &&
+                !marvell_pata_active(pdev))     /* PATA enable ? */
+                        return -ENOENT;
 
         return ata_sff_prereset(link, deadline);
 }
@@ -128,6 +147,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
         if (pdev->device == 0x6101)
                 ppi[1] = &ata_dummy_port_info;
 
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+        if (!marvell_pata_active(pdev)) {
+                printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+                return -ENODEV;
+        }
+#endif
         return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
 }
 
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 720b8645f58a..e970b227fbce 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -322,9 +322,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
         /* Try to acquire MMIO resources and fallback to PIO if
          * that fails
          */
-        rc = pcim_enable_device(pdev);
-        if (rc)
-                return rc;
         rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
         if (rc)
                 goto use_ioports;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 13c1d2af18ac..c815f8ecf6e6 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -667,7 +667,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
         { PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
         { PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
         { PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
-        /* RocketRAID 1740/174x have different identifiers */
+        /* RocketRAID 1720/174x have different identifiers */
+        { PCI_VDEVICE(TTI, 0x1720), chip_6042 },
         { PCI_VDEVICE(TTI, 0x1740), chip_508x },
         { PCI_VDEVICE(TTI, 0x1742), chip_508x },
 
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 858f70610eda..1e1f3f3757ae 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -309,8 +309,6 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-                        unsigned long deadline);
 static int nv_adma_slave_config(struct scsi_device *sdev);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -407,7 +405,7 @@ static struct scsi_host_template nv_swncq_sht = {
 
 static struct ata_port_operations nv_generic_ops = {
         .inherits               = &ata_bmdma_port_ops,
-        .hardreset              = nv_hardreset,
+        .hardreset              = ATA_OP_NULL,
         .scr_read               = nv_scr_read,
         .scr_write              = nv_scr_write,
 };
@@ -1588,21 +1586,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
         ata_sff_thaw(ap);
 }
 
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-                        unsigned long deadline)
-{
-        int rc;
-
-        /* SATA hardreset fails to retrieve proper device signature on
-         * some controllers.  Request follow up SRST.  For more info,
-         * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
-         */
-        rc = sata_sff_hardreset(link, class, deadline);
-        if (rc)
-                return rc;
-        return -EAGAIN;
-}
-
 static void nv_adma_error_handler(struct ata_port *ap)
 {
         struct nv_adma_port_priv *pp = ap->private_data;
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index db00b0591733..f1216cf6fa8f 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -423,7 +423,7 @@ int chp_new(struct chp_id chpid)
         ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
         if (ret) {
                 device_unregister(&chp->dev);
-                goto out_free;
+                goto out;
         }
         mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
         if (channel_subsystems[chpid.cssid]->cm_enabled) {
@@ -432,14 +432,15 @@ int chp_new(struct chp_id chpid)
                         sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
                         device_unregister(&chp->dev);
                         mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
-                        goto out_free;
+                        goto out;
                 }
         }
         channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
         mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
-        return ret;
+        goto out;
 out_free:
         kfree(chp);
+out:
         return ret;
 }
 
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 33bff8fec7d1..5954b905e3ca 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -208,8 +208,10 @@ cio_start_key (struct subchannel *sch,	/* subchannel structure */
         case 1:         /* status pending */
         case 2:         /* busy */
                 return -EBUSY;
-        default:                /* device/path not operational */
+        case 3:         /* device/path not operational */
                 return cio_start_handle_notoper(sch, lpm);
+        default:
+                return ccode;
         }
 }
 
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 51489eff6b0b..1261e1a9e8cd 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -633,6 +633,11 @@ channel_subsystem_release(struct device *dev)
 
         css = to_css(dev);
         mutex_destroy(&css->mutex);
+        if (css->pseudo_subchannel) {
+                /* Implies that it has been generated but never registered. */
+                css_subchannel_release(&css->pseudo_subchannel->dev);
+                css->pseudo_subchannel = NULL;
+        }
         kfree(css);
 }
 
@@ -785,11 +790,15 @@ init_channel_subsystem (void)
                 }
                 channel_subsystems[i] = css;
                 ret = setup_css(i);
-                if (ret)
-                        goto out_free;
+                if (ret) {
+                        kfree(channel_subsystems[i]);
+                        goto out_unregister;
+                }
                 ret = device_register(&css->device);
-                if (ret)
-                        goto out_free_all;
+                if (ret) {
+                        put_device(&css->device);
+                        goto out_unregister;
+                }
                 if (css_chsc_characteristics.secm) {
                         ret = device_create_file(&css->device,
                                                  &dev_attr_cm_enable);
@@ -802,7 +811,7 @@ init_channel_subsystem (void)
         }
         ret = register_reboot_notifier(&css_reboot_notifier);
         if (ret)
-                goto out_pseudo;
+                goto out_unregister;
         css_init_done = 1;
 
         /* Enable default isc for I/O subchannels. */
@@ -810,18 +819,12 @@ init_channel_subsystem (void)
 
         for_each_subchannel(__init_channel_subsystem, NULL);
         return 0;
-out_pseudo:
-        device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
 out_file:
-        device_remove_file(&channel_subsystems[i]->device,
-                           &dev_attr_cm_enable);
+        if (css_chsc_characteristics.secm)
+                device_remove_file(&channel_subsystems[i]->device,
+                                   &dev_attr_cm_enable);
 out_device:
         device_unregister(&channel_subsystems[i]->device);
-out_free_all:
-        kfree(channel_subsystems[i]->pseudo_subchannel->lock);
-        kfree(channel_subsystems[i]->pseudo_subchannel);
-out_free:
-        kfree(channel_subsystems[i]);
 out_unregister:
         while (i > 0) {
                 struct channel_subsystem *css;
@@ -829,6 +832,7 @@ out_unregister:
                 i--;
                 css = channel_subsystems[i];
                 device_unregister(&css->pseudo_subchannel->dev);
+                css->pseudo_subchannel = NULL;
                 if (css_chsc_characteristics.secm)
                         device_remove_file(&css->device,
                                            &dev_attr_cm_enable);
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 550508df952b..84cc9ea346db 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -658,6 +658,13 @@ ccw_device_offline(struct ccw_device *cdev)
 {
         struct subchannel *sch;
 
+        /* Allow ccw_device_offline while disconnected. */
+        if (cdev->private->state == DEV_STATE_DISCONNECTED ||
+            cdev->private->state == DEV_STATE_NOT_OPER) {
+                cdev->private->flags.donotify = 0;
+                ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+                return 0;
+        }
         if (ccw_device_is_orphan(cdev)) {
                 ccw_device_done(cdev, DEV_STATE_OFFLINE);
                 return 0;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 1eb64d08b60a..95b3ec89c126 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -208,7 +208,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
         if (cpu_is_omap16xx())
                 ocpi_enable();
 
-#ifdef  CONFIG_ARCH_OMAP_OTG
+#ifdef  CONFIG_USB_OTG
         if (need_transceiver) {
                 ohci->transceiver = otg_get_transceiver();
                 if (ohci->transceiver) {
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 7b74238ad1c7..e980766bb84b 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -161,7 +161,7 @@ static int usb_console_setup(struct console *co, char *options)
                 if (serial->type->set_termios) {
                         termios->c_cflag = cflag;
                         tty_termios_encode_baud_rate(termios, baud, baud);
-                        serial->type->set_termios(NULL, port, &dummy);
+                        serial->type->set_termios(tty, port, &dummy);
 
                         port->port.tty = NULL;
                         kfree(termios);
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index d4427cb86979..2e15da5459cf 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -60,7 +60,7 @@
 
 #define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
 
-#define BALLOON_CLASS_NAME "memory"
+#define BALLOON_CLASS_NAME "xen_memory"
 
 struct balloon_stats {
         /* We aim for 'current allocation' == 'target allocation'. */