pcmcia: use pcmcia_loop_config in net pcmcia drivers

Use the config loop helper in (some) net pcmcia drivers.

CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

9 files changed, 596 insertions, 654 deletions

diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 3f682d49a4e6..04ece0b77d1d 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -284,58 +284,47 @@ static int try_io_port(struct pcmcia_device *link)
     }
 }
 
+static int axnet_configcheck(struct pcmcia_device *p_dev,
+                             cistpl_cftable_entry_t *cfg,
+                             void *priv_data)
+{
+        int i;
+        cistpl_io_t *io = &cfg->io;
+
+        if (cfg->index == 0 || cfg->io.nwin == 0)
+                return -ENODEV;
+
+        p_dev->conf.ConfigIndex = 0x05;
+        /* For multifunction cards, by convention, we configure the
+           network function with window 0, and serial with window 1 */
+        if (io->nwin > 1) {
+                i = (io->win[1].len > io->win[0].len);
+                p_dev->io.BasePort2 = io->win[1-i].base;
+                p_dev->io.NumPorts2 = io->win[1-i].len;
+        } else {
+                i = p_dev->io.NumPorts2 = 0;
+        }
+        p_dev->io.BasePort1 = io->win[i].base;
+        p_dev->io.NumPorts1 = io->win[i].len;
+        p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+        if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+                return try_io_port(p_dev);
+
+        return -ENODEV;
+}
+
 static int axnet_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     axnet_dev_t *info = PRIV(dev);
-    tuple_t tuple;
-    cisparse_t parse;
     int i, j, last_ret, last_fn;
-    u_short buf[64];
     DECLARE_MAC_BUF(mac);
 
     DEBUG(0, "axnet_config(0x%p)\n", link);
 
-    tuple.Attributes = 0;
-    tuple.TupleData = (cisdata_t *)buf;
-    tuple.TupleDataMax = sizeof(buf);
-    tuple.TupleOffset = 0;
-
     /* don't trust the CIS on this; Linksys got it wrong */
     link->conf.Present = 0x63;
-
-    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-    tuple.Attributes = 0;
-    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-    while (last_ret == CS_SUCCESS) {
-        cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-        cistpl_io_t *io = &(parse.cftable_entry.io);
-        
-        if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
-                pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
-                cfg->index == 0 || cfg->io.nwin == 0)
-            goto next_entry;
-        
-        link->conf.ConfigIndex = 0x05;
-        /* For multifunction cards, by convention, we configure the
-           network function with window 0, and serial with window 1 */
-        if (io->nwin > 1) {
-            i = (io->win[1].len > io->win[0].len);
-            link->io.BasePort2 = io->win[1-i].base;
-            link->io.NumPorts2 = io->win[1-i].len;
-        } else {
-            i = link->io.NumPorts2 = 0;
-        }
-        link->io.BasePort1 = io->win[i].base;
-        link->io.NumPorts1 = io->win[i].len;
-        link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-        if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
-            last_ret = try_io_port(link);
-            if (last_ret == CS_SUCCESS) break;
-        }
-    next_entry:
-        last_ret = pcmcia_get_next_tuple(link, &tuple);
-    }
+    last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
     if (last_ret != CS_SUCCESS) {
         cs_error(link, RequestIO, last_ret);
         goto failed;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 2d4c4ad89b8d..7a9eeca6adc2 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -512,58 +512,53 @@ static int try_io_port(struct pcmcia_device *link)
     }
 }
 
+static int pcnet_confcheck(struct pcmcia_device *p_dev,
+                           cistpl_cftable_entry_t *cfg,
+                           void *priv_data)
+{
+        int *has_shmem = priv_data;
+        int i;
+        cistpl_io_t *io = &cfg->io;
+
+        if (cfg->index == 0 || cfg->io.nwin == 0)
+                return -EINVAL;
+
+        p_dev->conf.ConfigIndex = cfg->index;
+
+        /* For multifunction cards, by convention, we configure the
+           network function with window 0, and serial with window 1 */
+        if (io->nwin > 1) {
+                i = (io->win[1].len > io->win[0].len);
+                p_dev->io.BasePort2 = io->win[1-i].base;
+                p_dev->io.NumPorts2 = io->win[1-i].len;
+        } else {
+                i = p_dev->io.NumPorts2 = 0;
+        }
+
+        *has_shmem = ((cfg->mem.nwin == 1) &&
+                      (cfg->mem.win[0].len >= 0x4000));
+        p_dev->io.BasePort1 = io->win[i].base;
+        p_dev->io.NumPorts1 = io->win[i].len;
+        p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+        if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+                return try_io_port(p_dev);
+
+        return 0;
+}
+
 static int pcnet_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     pcnet_dev_t *info = PRIV(dev);
-    tuple_t tuple;
-    cisparse_t parse;
-    int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
+    int last_ret, last_fn, start_pg, stop_pg, cm_offset;
     int has_shmem = 0;
-    u_short buf[64];
     hw_info_t *local_hw_info;
     DECLARE_MAC_BUF(mac);
 
     DEBUG(0, "pcnet_config(0x%p)\n", link);
 
-    tuple.TupleData = (cisdata_t *)buf;
-    tuple.TupleDataMax = sizeof(buf);
-    tuple.TupleOffset = 0;
-    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-    tuple.Attributes = 0;
-    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-    while (last_ret == CS_SUCCESS) {
-        cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-        cistpl_io_t *io = &(parse.cftable_entry.io);
-
-        if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
-                        pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
-                        cfg->index == 0 || cfg->io.nwin == 0)
-                goto next_entry;
-
-        link->conf.ConfigIndex = cfg->index;
-        /* For multifunction cards, by convention, we configure the
-           network function with window 0, and serial with window 1 */
-        if (io->nwin > 1) {
-            i = (io->win[1].len > io->win[0].len);
-            link->io.BasePort2 = io->win[1-i].base;
-            link->io.NumPorts2 = io->win[1-i].len;
-        } else {
-            i = link->io.NumPorts2 = 0;
-        }
-        has_shmem = ((cfg->mem.nwin == 1) &&
-                     (cfg->mem.win[0].len >= 0x4000));
-        link->io.BasePort1 = io->win[i].base;
-        link->io.NumPorts1 = io->win[i].len;
-        link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-        if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
-            last_ret = try_io_port(link);
-            if (last_ret == CS_SUCCESS) break;
-        }
-    next_entry:
-        last_ret = pcmcia_get_next_tuple(link, &tuple);
-    }
-    if (last_ret != CS_SUCCESS) {
+    last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
+    if (last_ret) {
         cs_error(link, RequestIO, last_ret);
         goto failed;
     }
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 250eb1954c34..c012e3400736 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -459,28 +459,36 @@ static int mhz_3288_power(struct pcmcia_device *link)
     return 0;
 }
 
+static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
+                                cistpl_cftable_entry_t *cf,
+                                void *priv_data)
+{
+        int k;
+        p_dev->conf.ConfigIndex = cf->index;
+        p_dev->io.BasePort2 = cf->io.win[0].base;
+        for (k = 0; k < 0x400; k += 0x10) {
+                if (k & 0x80)
+                        continue;
+                p_dev->io.BasePort1 = k ^ 0x300;
+                if (!pcmcia_request_io(p_dev, &p_dev->io))
+                        return 0;
+        }
+        return -ENODEV;
+}
+
 static int mhz_mfc_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     struct smc_private *smc = netdev_priv(dev);
     struct smc_cfg_mem *cfg_mem;
-    tuple_t *tuple;
-    cisparse_t *parse;
-    cistpl_cftable_entry_t *cf;
-    u_char *buf;
     win_req_t req;
     memreq_t mem;
-    int i, k;
+    int i;
 
     cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
     if (!cfg_mem)
         return CS_OUT_OF_RESOURCE;
 
-    tuple = &cfg_mem->tuple;
-    parse = &cfg_mem->parse;
-    cf = &parse->cftable_entry;
-    buf = cfg_mem->buf;
-
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
     link->irq.Attributes =
@@ -489,27 +497,9 @@ static int mhz_mfc_config(struct pcmcia_device *link)
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts2 = 8;
 
-    tuple->Attributes = tuple->TupleOffset = 0;
-    tuple->TupleData = (cisdata_t *)buf;
-    tuple->TupleDataMax = 255;
-    tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
-    i = first_tuple(link, tuple, parse);
     /* The Megahertz combo cards have modem-like CIS entries, so
        we have to explicitly try a bunch of port combinations. */
-    while (i == CS_SUCCESS) {
-        link->conf.ConfigIndex = cf->index;
-        link->io.BasePort2 = cf->io.win[0].base;
-        for (k = 0; k < 0x400; k += 0x10) {
-            if (k & 0x80) continue;
-            link->io.BasePort1 = k ^ 0x300;
-            i = pcmcia_request_io(link, &link->io);
-            if (i == CS_SUCCESS) break;
-        }
-        if (i == CS_SUCCESS) break;
-        i = next_tuple(link, tuple, parse);
-    }
-    if (i != CS_SUCCESS)
+    if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
         goto free_cfg_mem;
     dev->base_addr = link->io.BasePort1;
 
@@ -533,7 +523,7 @@ static int mhz_mfc_config(struct pcmcia_device *link)
 
 free_cfg_mem:
     kfree(cfg_mem);
-    return i;
+    return -ENODEV;
 }
 
 static int mhz_setup(struct pcmcia_device *link)
@@ -660,46 +650,26 @@ static int mot_setup(struct pcmcia_device *link)
 
 /*====================================================================*/
 
+static int smc_configcheck(struct pcmcia_device *p_dev,
+                           cistpl_cftable_entry_t *cf,
+                           void *priv_data)
+{
+        p_dev->conf.ConfigIndex = cf->index;
+        p_dev->io.BasePort1 = cf->io.win[0].base;
+        p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+        return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
 static int smc_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
-    struct smc_cfg_mem *cfg_mem;
-    tuple_t *tuple;
-    cisparse_t *parse;
-    cistpl_cftable_entry_t *cf;
-    u_char *buf;
     int i;
 
-    cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
-    if (!cfg_mem)
-        return CS_OUT_OF_RESOURCE;
-
-    tuple = &cfg_mem->tuple;
-    parse = &cfg_mem->parse;
-    cf = &parse->cftable_entry;
-    buf = cfg_mem->buf;
-
-    tuple->Attributes = tuple->TupleOffset = 0;
-    tuple->TupleData = (cisdata_t *)buf;
-    tuple->TupleDataMax = 255;
-    tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
     link->io.NumPorts1 = 16;
-    i = first_tuple(link, tuple, parse);
-    while (i != CS_NO_MORE_ITEMS) {
-        if (i == CS_SUCCESS) {
-            link->conf.ConfigIndex = cf->index;
-            link->io.BasePort1 = cf->io.win[0].base;
-            link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
-            i = pcmcia_request_io(link, &link->io);
-            if (i == CS_SUCCESS) break;
-        }
-        i = next_tuple(link, tuple, parse);
-    }
-    if (i == CS_SUCCESS)
-        dev->base_addr = link->io.BasePort1;
+    i = pcmcia_loop_config(link, smc_configcheck, NULL);
+    if (!i)
+            dev->base_addr = link->io.BasePort1;
 
-    kfree(cfg_mem);
     return i;
 }
 
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index f6c4698ce738..b57f022952b4 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -715,6 +715,45 @@ has_ce2_string(struct pcmcia_device * p_dev)
         return 0;
 }
 
+static int
+xirc2ps_config_modem(struct pcmcia_device *p_dev,
+                     cistpl_cftable_entry_t *cf,
+                     void *priv_data)
+{
+        unsigned int ioaddr;
+
+        if (cf->io.nwin > 0  &&  (cf->io.win[0].base & 0xf) == 8) {
+                for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
+                        p_dev->conf.ConfigIndex = cf->index ;
+                        p_dev->io.BasePort2 = cf->io.win[0].base;
+                        p_dev->io.BasePort1 = ioaddr;
+                        if (!pcmcia_request_io(p_dev, &p_dev->io))
+                                return 0;
+                }
+        }
+        return -ENODEV;
+}
+
+static int
+xirc2ps_config_check(struct pcmcia_device *p_dev,
+                     cistpl_cftable_entry_t *cf,
+                     void *priv_data)
+{
+        int *pass = priv_data;
+
+        if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
+                p_dev->conf.ConfigIndex = cf->index ;
+                p_dev->io.BasePort2 = cf->io.win[0].base;
+                p_dev->io.BasePort1 = p_dev->io.BasePort2
+                        + (*pass ? (cf->index & 0x20 ? -24:8)
+                           : (cf->index & 0x20 ?   8:-24));
+                if (!pcmcia_request_io(p_dev, &p_dev->io))
+                        return 0;
+        }
+        return -ENODEV;
+
+}
+
 /****************
  * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
  * is received, to configure the PCMCIA socket, and to make the
@@ -725,13 +764,12 @@ xirc2ps_config(struct pcmcia_device * link)
 {
     struct net_device *dev = link->priv;
     local_info_t *local = netdev_priv(dev);
+    unsigned int ioaddr;
     tuple_t tuple;
     cisparse_t parse;
-    unsigned int ioaddr;
     int err, i;
     u_char buf[64];
     cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
-    cistpl_cftable_entry_t *cf = &parse.cftable_entry;
     DECLARE_MAC_BUF(mac);
 
     local->dingo_ccr = NULL;
@@ -846,19 +884,8 @@ xirc2ps_config(struct pcmcia_device * link)
             /* Take the Modem IO port from the CIS and scan for a free
              * Ethernet port */
             link->io.NumPorts1 = 16; /* no Mako stuff anymore */
-            tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-            for (err = first_tuple(link, &tuple, &parse); !err;
-                                 err = next_tuple(link, &tuple, &parse)) {
-                if (cf->io.nwin > 0  &&  (cf->io.win[0].base & 0xf) == 8) {
-                    for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
-                        link->conf.ConfigIndex = cf->index ;
-                        link->io.BasePort2 = cf->io.win[0].base;
-                        link->io.BasePort1 = ioaddr;
-                        if (!(err=pcmcia_request_io(link, &link->io)))
-                            goto port_found;
-                    }
-                }
-            }
+            if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
+                    goto port_found;
         } else {
             link->io.NumPorts1 = 18;
             /* We do 2 passes here: The first one uses the regular mapping and
@@ -866,21 +893,9 @@ xirc2ps_config(struct pcmcia_device * link)
              * mirrored every 32 bytes. Actually we use a mirrored port for
              * the Mako if (on the first pass) the COR bit 5 is set.
              */
-            for (pass=0; pass < 2; pass++) {
-                tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-                for (err = first_tuple(link, &tuple, &parse); !err;
-                                     err = next_tuple(link, &tuple, &parse)){
-                    if (cf->io.nwin > 0  &&  (cf->io.win[0].base & 0xf) == 8){
-                        link->conf.ConfigIndex = cf->index ;
-                        link->io.BasePort2 = cf->io.win[0].base;
-                        link->io.BasePort1 = link->io.BasePort2
-                                    + (pass ? (cf->index & 0x20 ? -24:8)
-                                            : (cf->index & 0x20 ?   8:-24));
-                        if (!(err=pcmcia_request_io(link, &link->io)))
+            for (pass=0; pass < 2; pass++)
+                    if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
                             goto port_found;
-                    }
-                }
-            }
             /* if special option:
              * try to configure as Ethernet only.
              * .... */
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index f12355398fe7..4fbe811bebfc 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -206,126 +206,131 @@ static void airo_detach(struct pcmcia_device *link)
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
+struct airo_cs_config_data {
+        cistpl_cftable_entry_t dflt;
+        win_req_t req;
+};
+
+static int airo_cs_config_check(struct pcmcia_device *p_dev,
+                                cistpl_cftable_entry_t *cfg,
+                                void *priv_data)
+{
+        struct airo_cs_config_data *cfg_mem = priv_data;
+
+        if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+                cfg_mem->dflt = *cfg;
+
+        if (cfg->index == 0)
+                return -ENODEV;
+
+        p_dev->conf.ConfigIndex = cfg->index;
+
+        /* Does this card need audio output? */
+        if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+                p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+                p_dev->conf.Status = CCSR_AUDIO_ENA;
+        }
+
+        /* Use power settings for Vcc and Vpp if present */
+        /*  Note that the CIS values need to be rescaled */
+        if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+        else if (cfg_mem->dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+        /* Do we need to allocate an interrupt? */
+        if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+                p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+        /* IO window settings */
+        p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+        if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
+                cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+                p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+                if (!(io->flags & CISTPL_IO_8BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+                if (!(io->flags & CISTPL_IO_16BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+                p_dev->io.BasePort1 = io->win[0].base;
+                p_dev->io.NumPorts1 = io->win[0].len;
+                if (io->nwin > 1) {
+                        p_dev->io.Attributes2 = p_dev->io.Attributes1;
+                        p_dev->io.BasePort2 = io->win[1].base;
+                        p_dev->io.NumPorts2 = io->win[1].len;
+                }
+        }
+
+        /* This reserves IO space but doesn't actually enable it */
+        if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+                return -ENODEV;
+
+        /*
+          Now set up a common memory window, if needed.  There is room
+          in the struct pcmcia_device structure for one memory window handle,
+          but if the base addresses need to be saved, or if multiple
+          windows are needed, the info should go in the private data
+          structure for this device.
+
+          Note that the memory window base is a physical address, and
+          needs to be mapped to virtual space with ioremap() before it
+          is used.
+        */
+        if ((cfg->mem.nwin > 0) || (cfg_mem->dflt.mem.nwin > 0)) {
+                cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &cfg_mem->dflt.mem;
+                memreq_t map;
+                cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+                cfg_mem->req.Base = mem->win[0].host_addr;
+                cfg_mem->req.Size = mem->win[0].len;
+                cfg_mem->req.AccessSpeed = 0;
+                if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0)
+                        return -ENODEV;
+                map.Page = 0;
+                map.CardOffset = mem->win[0].card_addr;
+                if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+                        return -ENODEV;
+        }
+        /* If we got this far, we're cool! */
+        return 0;
+}
+
+
 static int airo_config(struct pcmcia_device *link)
 {
-        tuple_t tuple;
-        cisparse_t parse;
         local_info_t *dev;
+        struct airo_cs_config_data *cfg_mem;
         int last_fn, last_ret;
-        u_char buf[64];
-        win_req_t req;
-        memreq_t map;
 
         dev = link->priv;
 
         DEBUG(0, "airo_config(0x%p)\n", link);
 
+        cfg_mem = kzalloc(sizeof(struct airo_cs_config_data), GFP_KERNEL);
+        if (!cfg_mem)
+                return -ENOMEM;
+
         /*
-          In this loop, we scan the CIS for configuration table entries,
-          each of which describes a valid card configuration, including
-          voltage, IO window, memory window, and interrupt settings.
-          
-          We make no assumptions about the card to be configured: we use
-          just the information available in the CIS.  In an ideal world,
-          this would work for any PCMCIA card, but it requires a complete
-          and accurate CIS.  In practice, a driver usually "knows" most of
-          these things without consulting the CIS, and most client drivers
-          will only use the CIS to fill in implementation-defined details.
+         * In this loop, we scan the CIS for configuration table
+         * entries, each of which describes a valid card
+         * configuration, including voltage, IO window, memory window,
+         * and interrupt settings.
+         *
+         * We make no assumptions about the card to be configured: we
+         * use just the information available in the CIS.  In an ideal
+         * world, this would work for any PCMCIA card, but it requires
+         * a complete and accurate CIS.  In practice, a driver usually
+         * "knows" most of these things without consulting the CIS,
+         * and most client drivers will only use the CIS to fill in
+         * implementation-defined details.
+         */
+        last_ret = pcmcia_loop_config(link, airo_cs_config_check, cfg_mem);
+        if (last_ret)
+                goto failed;
+
+        /*
+          Allocate an interrupt line.  Note that this does not assign a
+          handler to the interrupt, unless the 'Handler' member of the
+          irq structure is initialized.
         */
-        tuple.Attributes = 0;
-        tuple.TupleData = buf;
-        tuple.TupleDataMax = sizeof(buf);
-        tuple.TupleOffset = 0;
-        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-        while (1) {
-                cistpl_cftable_entry_t dflt = { 0 };
-                cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-                if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
-                                pcmcia_parse_tuple(link, &tuple, &parse) != 0)
-                        goto next_entry;
-                
-                if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
-                if (cfg->index == 0) goto next_entry;
-                link->conf.ConfigIndex = cfg->index;
-                
-                /* Does this card need audio output? */
-                if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-                        link->conf.Attributes |= CONF_ENABLE_SPKR;
-                        link->conf.Status = CCSR_AUDIO_ENA;
-                }
-                
-                /* Use power settings for Vcc and Vpp if present */
-                /*  Note that the CIS values need to be rescaled */
-                if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                                cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-                else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                                dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-                
-                /* Do we need to allocate an interrupt? */
-                if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-                        link->conf.Attributes |= CONF_ENABLE_IRQ;
-                
-                /* IO window settings */
-                link->io.NumPorts1 = link->io.NumPorts2 = 0;
-                if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-                        cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-                        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-                        if (!(io->flags & CISTPL_IO_8BIT))
-                                link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-                        if (!(io->flags & CISTPL_IO_16BIT))
-                                link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-                        link->io.BasePort1 = io->win[0].base;
-                        link->io.NumPorts1 = io->win[0].len;
-                        if (io->nwin > 1) {
-                                link->io.Attributes2 = link->io.Attributes1;
-                                link->io.BasePort2 = io->win[1].base;
-                                link->io.NumPorts2 = io->win[1].len;
-                        }
-                }
-                
-                /* This reserves IO space but doesn't actually enable it */
-                if (pcmcia_request_io(link, &link->io) != 0)
-                        goto next_entry;
-                
-                /*
-                  Now set up a common memory window, if needed.  There is room
-                  in the struct pcmcia_device structure for one memory window handle,
-                  but if the base addresses need to be saved, or if multiple
-                  windows are needed, the info should go in the private data
-                  structure for this device.
-                  
-                  Note that the memory window base is a physical address, and
-                  needs to be mapped to virtual space with ioremap() before it
-                  is used.
-                */
-                if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
-                        cistpl_mem_t *mem =
-                                (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
-                        req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-                        req.Base = mem->win[0].host_addr;
-                        req.Size = mem->win[0].len;
-                        req.AccessSpeed = 0;
-                        if (pcmcia_request_window(&link, &req, &link->win) != 0)
-                                goto next_entry;
-                        map.Page = 0; map.CardOffset = mem->win[0].card_addr;
-                        if (pcmcia_map_mem_page(link->win, &map) != 0)
-                                goto next_entry;
-                }
-                /* If we got this far, we're cool! */
-                break;
-                
-        next_entry:
-                CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
-        }
-        
-    /*
-      Allocate an interrupt line.  Note that this does not assign a
-      handler to the interrupt, unless the 'Handler' member of the
-      irq structure is initialized.
-    */
         if (link->conf.Attributes & CONF_ENABLE_IRQ)
                 CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
         
@@ -362,14 +367,17 @@ static int airo_config(struct pcmcia_device *link)
                 printk(" & 0x%04x-0x%04x", link->io.BasePort2,
                        link->io.BasePort2+link->io.NumPorts2-1);
         if (link->win)
-                printk(", mem 0x%06lx-0x%06lx", req.Base,
-                       req.Base+req.Size-1);
+                printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base,
+                       cfg_mem->req.Base+cfg_mem->req.Size-1);
         printk("\n");
+        kfree(cfg_mem);
         return 0;
 
  cs_failed:
         cs_error(link, last_fn, last_ret);
+ failed:
         airo_release(link);
+        kfree(cfg_mem);
         return -ENODEV;
 } /* airo_config */
 
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 12617cd0b78e..263c36f7ee22 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -224,25 +224,69 @@ static int card_present(void *arg)
         return 0;
 }
 
+static int atmel_config_check(struct pcmcia_device *p_dev,
+                              cistpl_cftable_entry_t *cfg,
+                              void *priv_data)
+{
+        cistpl_cftable_entry_t *dflt = priv_data;
+
+        if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+                *dflt = *cfg;
+        if (cfg->index == 0)
+                return -ENODEV;
+        p_dev->conf.ConfigIndex = cfg->index;
+
+        /* Does this card need audio output? */
+        if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+                p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+                p_dev->conf.Status = CCSR_AUDIO_ENA;
+        }
+
+        /* Use power settings for Vcc and Vpp if present */
+        /*  Note that the CIS values need to be rescaled */
+        if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+        else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+        /* Do we need to allocate an interrupt? */
+        if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+                p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+        /* IO window settings */
+        p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+        if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+                cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+                p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+                if (!(io->flags & CISTPL_IO_8BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+                if (!(io->flags & CISTPL_IO_16BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+                p_dev->io.BasePort1 = io->win[0].base;
+                p_dev->io.NumPorts1 = io->win[0].len;
+                if (io->nwin > 1) {
+                        p_dev->io.Attributes2 = p_dev->io.Attributes1;
+                        p_dev->io.BasePort2 = io->win[1].base;
+                        p_dev->io.NumPorts2 = io->win[1].len;
+                }
+        }
+
+        /* This reserves IO space but doesn't actually enable it */
+        return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
 static int atmel_config(struct pcmcia_device *link)
 {
-        tuple_t tuple;
-        cisparse_t parse;
         local_info_t *dev;
         int last_fn, last_ret;
-        u_char buf[64];
         struct pcmcia_device_id *did;
+        cistpl_cftable_entry_t dflt = { 0 };
 
         dev = link->priv;
         did = handle_to_dev(link).driver_data;
 
         DEBUG(0, "atmel_config(0x%p)\n", link);
 
-        tuple.Attributes = 0;
-        tuple.TupleData = buf;
-        tuple.TupleDataMax = sizeof(buf);
-        tuple.TupleOffset = 0;
-
         /*
           In this loop, we scan the CIS for configuration table entries,
           each of which describes a valid card configuration, including
@@ -255,66 +299,8 @@ static int atmel_config(struct pcmcia_device *link)
           these things without consulting the CIS, and most client drivers
           will only use the CIS to fill in implementation-defined details.
         */
-        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-        while (1) {
-                cistpl_cftable_entry_t dflt = { 0 };
-                cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-                if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
-                                pcmcia_parse_tuple(link, &tuple, &parse) != 0)
-                        goto next_entry;
-
-                if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
-                if (cfg->index == 0) goto next_entry;
-                link->conf.ConfigIndex = cfg->index;
-
-                /* Does this card need audio output? */
-                if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-                        link->conf.Attributes |= CONF_ENABLE_SPKR;
-                        link->conf.Status = CCSR_AUDIO_ENA;
-                }
-
-                /* Use power settings for Vcc and Vpp if present */
-                /*  Note that the CIS values need to be rescaled */
-                if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                                cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-                else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                                dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-                /* Do we need to allocate an interrupt? */
-                if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-                        link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-                /* IO window settings */
-                link->io.NumPorts1 = link->io.NumPorts2 = 0;
-                if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-                        cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-                        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-                        if (!(io->flags & CISTPL_IO_8BIT))
-                                link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-                        if (!(io->flags & CISTPL_IO_16BIT))
-                                link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-                        link->io.BasePort1 = io->win[0].base;
-                        link->io.NumPorts1 = io->win[0].len;
-                        if (io->nwin > 1) {
-                                link->io.Attributes2 = link->io.Attributes1;
-                                link->io.BasePort2 = io->win[1].base;
-                                link->io.NumPorts2 = io->win[1].len;
-                        }
-                }
-
-                /* This reserves IO space but doesn't actually enable it */
-                if (pcmcia_request_io(link, &link->io) != 0)
-                        goto next_entry;
-
-                /* If we got this far, we're cool! */
-                break;
-
-        next_entry:
-                CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
-        }
+        if (pcmcia_loop_config(link, atmel_config_check, &dflt))
+                goto failed;
 
         /*
           Allocate an interrupt line.  Note that this does not assign a
@@ -360,6 +346,7 @@ static int atmel_config(struct pcmcia_device *link)
 
  cs_failed:
         cs_error(link, last_fn, last_ret);
+ failed:
         atmel_release(link);
         return -ENODEV;
 }
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 3b4e55cf33cd..3d914dde5de0 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -532,145 +532,134 @@ static void prism2_detach(struct pcmcia_device *link)
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
-#define CFG_CHECK2(fn, retf) \
-do { int _ret = (retf); \
-if (_ret != 0) { \
-        PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \
-        cs_error(link, fn, _ret); \
-        goto next_entry; \
-} \
-} while (0)
-
 
 /* run after a CARD_INSERTION event is received to configure the PCMCIA
  * socket and make the device available to the system */
+
+struct prism2_config_data {
+        cistpl_cftable_entry_t dflt;
+        config_info_t conf;
+};
+
+static int prism2_config_check(struct pcmcia_device *p_dev,
+                               cistpl_cftable_entry_t *cfg,
+                               void *priv_data)
+{
+        struct prism2_config_data *cfg_mem = priv_data;
+
+        if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+                cfg_mem->dflt = *cfg;
+        if (cfg->index == 0)
+                return -ENODEV;
+
+        p_dev->conf.ConfigIndex = cfg->index;
+        PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
+               "(default 0x%02X)\n", cfg->index, cfg_mem->dflt.index);
+
+        /* Does this card need audio output? */
+        if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+                p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+                p_dev->conf.Status = CCSR_AUDIO_ENA;
+        }
+
+        /* Use power settings for Vcc and Vpp if present */
+        /*  Note that the CIS values need to be rescaled */
+        if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+                    10000 && !ignore_cis_vcc) {
+                        PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
+                               " this entry\n");
+                        return -ENODEV;
+                }
+        } else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] /
+                    10000 && !ignore_cis_vcc) {
+                        PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
+                               "- skipping this entry\n");
+                        return -ENODEV;
+                }
+        }
+
+        if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+        else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+        /* Do we need to allocate an interrupt? */
+        if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+                p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+        else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
+                /* At least Compaq WL200 does not have IRQInfo1 set,
+                 * but it does not work without interrupts.. */
+                printk(KERN_WARNING "Config has no IRQ info, but trying to "
+                       "enable IRQ anyway..\n");
+                p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+        }
+
+        /* IO window settings */
+        PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
+               "cfg_mem->dflt.io.nwin=%d\n",
+               cfg->io.nwin, cfg_mem->dflt.io.nwin);
+        p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+        if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
+                cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+                p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+                PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
+                       "io.base=0x%04x, len=%d\n", io->flags,
+                       io->win[0].base, io->win[0].len);
+                if (!(io->flags & CISTPL_IO_8BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+                if (!(io->flags & CISTPL_IO_16BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+                p_dev->io.IOAddrLines = io->flags &
+                        CISTPL_IO_LINES_MASK;
+                p_dev->io.BasePort1 = io->win[0].base;
+                p_dev->io.NumPorts1 = io->win[0].len;
+                if (io->nwin > 1) {
+                        p_dev->io.Attributes2 = p_dev->io.Attributes1;
+                        p_dev->io.BasePort2 = io->win[1].base;
+                        p_dev->io.NumPorts2 = io->win[1].len;
+                }
+        }
+
+        /* This reserves IO space but doesn't actually enable it */
+        return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
 static int prism2_config(struct pcmcia_device *link)
 {
         struct net_device *dev;
         struct hostap_interface *iface;
+        struct prism2_config_data *cfg_mem;
         local_info_t *local;
         int ret = 1;
-        tuple_t tuple;
-        cisparse_t *parse;
         int last_fn, last_ret;
-        u_char buf[64];
-        config_info_t conf;
-        cistpl_cftable_entry_t dflt = { 0 };
         struct hostap_cs_priv *hw_priv;
 
         PDEBUG(DEBUG_FLOW, "prism2_config()\n");
 
-        parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
+        cfg_mem = kzalloc(sizeof(struct prism2_config_data), GFP_KERNEL);
+        if (!cfg_mem)
+                return -ENOMEM;
+
         hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
-        if (parse == NULL || hw_priv == NULL) {
+        if (hw_priv == NULL) {
                 ret = -ENOMEM;
                 goto failed;
         }
 
-        tuple.Attributes = 0;
-        tuple.TupleData = buf;
-        tuple.TupleDataMax = sizeof(buf);
-        tuple.TupleOffset = 0;
-
         CS_CHECK(GetConfigurationInfo,
-                 pcmcia_get_configuration_info(link, &conf));
+                 pcmcia_get_configuration_info(link, &cfg_mem->conf));
 
         /* Look for an appropriate configuration table entry in the CIS */
-        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-        for (;;) {
-                cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
-                CFG_CHECK2(GetTupleData,
-                           pcmcia_get_tuple_data(link, &tuple));
-                CFG_CHECK2(ParseTuple,
-                           pcmcia_parse_tuple(link, &tuple, parse));
-
-                if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-                        dflt = *cfg;
-                if (cfg->index == 0)
-                        goto next_entry;
-                link->conf.ConfigIndex = cfg->index;
-                PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
-                       "(default 0x%02X)\n", cfg->index, dflt.index);
-
-                /* Does this card need audio output? */
-                if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-                        link->conf.Attributes |= CONF_ENABLE_SPKR;
-                        link->conf.Status = CCSR_AUDIO_ENA;
-                }
-
-                /* Use power settings for Vcc and Vpp if present */
-                /*  Note that the CIS values need to be rescaled */
-                if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                        if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
-                            10000 && !ignore_cis_vcc) {
-                                PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
-                                       " this entry\n");
-                                goto next_entry;
-                        }
-                } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                        if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
-                            10000 && !ignore_cis_vcc) {
-                                PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
-                                       "- skipping this entry\n");
-                                goto next_entry;
-                        }
-                }
-
-                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                                cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-                else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                                dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-                /* Do we need to allocate an interrupt? */
-                if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-                        link->conf.Attributes |= CONF_ENABLE_IRQ;
-                else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) {
-                        /* At least Compaq WL200 does not have IRQInfo1 set,
-                         * but it does not work without interrupts.. */
-                        printk("Config has no IRQ info, but trying to enable "
-                               "IRQ anyway..\n");
-                        link->conf.Attributes |= CONF_ENABLE_IRQ;
-                }
-
-                /* IO window settings */
-                PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
-                       "dflt.io.nwin=%d\n",
-                       cfg->io.nwin, dflt.io.nwin);
-                link->io.NumPorts1 = link->io.NumPorts2 = 0;
-                if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-                        cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-                        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-                        PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
-                               "io.base=0x%04x, len=%d\n", io->flags,
-                               io->win[0].base, io->win[0].len);
-                        if (!(io->flags & CISTPL_IO_8BIT))
-                                link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-                        if (!(io->flags & CISTPL_IO_16BIT))
-                                link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-                        link->io.IOAddrLines = io->flags &
-                                CISTPL_IO_LINES_MASK;
-                        link->io.BasePort1 = io->win[0].base;
-                        link->io.NumPorts1 = io->win[0].len;
-                        if (io->nwin > 1) {
-                                link->io.Attributes2 = link->io.Attributes1;
-                                link->io.BasePort2 = io->win[1].base;
-                                link->io.NumPorts2 = io->win[1].len;
-                        }
-                }
-
-                /* This reserves IO space but doesn't actually enable it */
-                CFG_CHECK2(RequestIO,
-                           pcmcia_request_io(link, &link->io));
-
-                /* This configuration table entry is OK */
-                break;
-
-        next_entry:
-                CS_CHECK(GetNextTuple,
-                         pcmcia_get_next_tuple(link, &tuple));
+        last_ret = pcmcia_loop_config(link, prism2_config_check, cfg_mem);
+        if (last_ret) {
+                if (!ignore_cis_vcc)
+                        printk(KERN_ERR "GetNextTuple(): No matching "
+                               "CIS configuration.  Maybe you need the "
+                               "ignore_cis_vcc=1 parameter.\n");
+                cs_error(link, RequestIO, last_ret);
+                goto failed;
         }
 
         /* Need to allocate net_device before requesting IRQ handler */
@@ -738,15 +727,15 @@ static int prism2_config(struct pcmcia_device *link)
                 if (ret == 0 && local->ddev)
                         strcpy(hw_priv->node.dev_name, local->ddev->name);
         }
-        kfree(parse);
+        kfree(cfg_mem);
         return ret;
 
  cs_failed:
         cs_error(link, last_fn, last_ret);
 
  failed:
-        kfree(parse);
         kfree(hw_priv);
+        kfree(cfg_mem);
         prism2_release((u_long)link);
         return ret;
 }
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 1c216e015f64..473370c9e0d6 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -164,23 +164,96 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
                 last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
         } while (0)
 
+struct orinoco_cs_config_data {
+        cistpl_cftable_entry_t dflt;
+        config_info_t conf;
+};
+
+static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
+                                   cistpl_cftable_entry_t *cfg,
+                                   void *priv_data)
+{
+        struct orinoco_cs_config_data *cfg_mem = priv_data;
+
+        if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+                cfg_mem->dflt = *cfg;
+        if (cfg->index == 0)
+                goto next_entry;
+        p_dev->conf.ConfigIndex = cfg->index;
+
+        /* Use power settings for Vcc and Vpp if present */
+        /* Note that the CIS values need to be rescaled */
+        if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+                        DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+                        if (!ignore_cis_vcc)
+                                goto next_entry;
+                }
+        } else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
+                        DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+                        if (!ignore_cis_vcc)
+                                goto next_entry;
+                }
+        }
+
+        if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp =
+                        cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+        else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp =
+                        cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+        /* Do we need to allocate an interrupt? */
+        p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+        /* IO window settings */
+        p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+        if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
+                cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+                p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+                if (!(io->flags & CISTPL_IO_8BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+                if (!(io->flags & CISTPL_IO_16BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+                p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+                p_dev->io.BasePort1 = io->win[0].base;
+                p_dev->io.NumPorts1 = io->win[0].len;
+                if (io->nwin > 1) {
+                        p_dev->io.Attributes2 = p_dev->io.Attributes1;
+                        p_dev->io.BasePort2 = io->win[1].base;
+                        p_dev->io.NumPorts2 = io->win[1].len;
+                }
+
+                /* This reserves IO space but doesn't actually enable it */
+                if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+                        goto next_entry;
+        }
+        return 0;
+
+next_entry:
+        pcmcia_disable_device(p_dev);
+        return -ENODEV;
+};
+
 static int
 orinoco_cs_config(struct pcmcia_device *link)
 {
+        struct orinoco_cs_config_data *cfg_mem;
         struct net_device *dev = link->priv;
         struct orinoco_private *priv = netdev_priv(dev);
         struct orinoco_pccard *card = priv->card;
         hermes_t *hw = &priv->hw;
         int last_fn, last_ret;
-        u_char buf[64];
-        config_info_t conf;
-        tuple_t tuple;
-        cisparse_t parse;
         void __iomem *mem;
 
+        cfg_mem = kzalloc(sizeof(struct orinoco_cs_config_data), GFP_KERNEL);
+        if (!cfg_mem)
+                return -ENOMEM;
+
         /* Look up the current Vcc */
         CS_CHECK(GetConfigurationInfo,
-                 pcmcia_get_configuration_info(link, &conf));
+                 pcmcia_get_configuration_info(link, &cfg_mem->conf));
 
         /*
          * In this loop, we scan the CIS for configuration table
@@ -196,94 +269,14 @@ orinoco_cs_config(struct pcmcia_device *link)
          * and most client drivers will only use the CIS to fill in
          * implementation-defined details.
          */
-        tuple.Attributes = 0;
-        tuple.TupleData = buf;
-        tuple.TupleDataMax = sizeof(buf);
-        tuple.TupleOffset = 0;
-        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-        while (1) {
-                cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-                cistpl_cftable_entry_t dflt = { .index = 0 };
-
-                if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
-                    || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
-                        goto next_entry;
-
-                if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-                        dflt = *cfg;
-                if (cfg->index == 0)
-                        goto next_entry;
-                link->conf.ConfigIndex = cfg->index;
-
-                /* Use power settings for Vcc and Vpp if present */
-                /* Note that the CIS values need to be rescaled */
-                if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                        if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-                                DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n",  conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
-                                if (!ignore_cis_vcc)
-                                        goto next_entry;
-                        }
-                } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                        if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
-                                DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n",  conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
-                                if(!ignore_cis_vcc)
-                                        goto next_entry;
-                        }
-                }
-
-                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                            cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-                else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                            dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-                
-                /* Do we need to allocate an interrupt? */
-                link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-                /* IO window settings */
-                link->io.NumPorts1 = link->io.NumPorts2 = 0;
-                if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-                        cistpl_io_t *io =
-                            (cfg->io.nwin) ? &cfg->io : &dflt.io;
-                        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-                        if (!(io->flags & CISTPL_IO_8BIT))
-                                link->io.Attributes1 =
-                                    IO_DATA_PATH_WIDTH_16;
-                        if (!(io->flags & CISTPL_IO_16BIT))
-                                link->io.Attributes1 =
-                                    IO_DATA_PATH_WIDTH_8;
-                        link->io.IOAddrLines =
-                            io->flags & CISTPL_IO_LINES_MASK;
-                        link->io.BasePort1 = io->win[0].base;
-                        link->io.NumPorts1 = io->win[0].len;
-                        if (io->nwin > 1) {
-                                link->io.Attributes2 =
-                                    link->io.Attributes1;
-                                link->io.BasePort2 = io->win[1].base;
-                                link->io.NumPorts2 = io->win[1].len;
-                        }
-
-                        /* This reserves IO space but doesn't actually enable it */
-                        if (pcmcia_request_io(link, &link->io) != 0)
-                                goto next_entry;
-                }
-
-
-                /* If we got this far, we're cool! */
-
-                break;
-                
-        next_entry:
-                pcmcia_disable_device(link);
-                last_ret = pcmcia_get_next_tuple(link, &tuple);
-                if (last_ret  == CS_NO_MORE_ITEMS) {
+        last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, cfg_mem);
+        if (last_ret) {
+                if (!ignore_cis_vcc)
                         printk(KERN_ERR PFX "GetNextTuple(): No matching "
                                "CIS configuration.  Maybe you need the "
                                "ignore_cis_vcc=1 parameter.\n");
-                        goto cs_failed;
-                }
+                cs_error(link, RequestIO, last_ret);
+                goto failed;
         }
 
         /*
@@ -334,7 +327,7 @@ orinoco_cs_config(struct pcmcia_device *link)
                "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
                link->irq.AssignedIRQ, link->io.BasePort1,
                link->io.BasePort1 + link->io.NumPorts1 - 1);
-
+        kfree(cfg_mem);
         return 0;
 
  cs_failed:
@@ -342,6 +335,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 
  failed:
         orinoco_cs_release(link);
+        kfree(cfg_mem);
         return -ENODEV;
 }                               /* orinoco_cs_config */
 
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 98df9bc7836a..8e1951cfc152 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -633,23 +633,96 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
  * device available to the system.
  */
 
+struct spectrum_cs_config_data {
+        cistpl_cftable_entry_t dflt;
+        config_info_t conf;
+};
+
+static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
+                                    cistpl_cftable_entry_t *cfg,
+                                    void *priv_data)
+{
+        struct spectrum_cs_config_data *cfg_mem = priv_data;
+
+        if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+                cfg_mem->dflt = *cfg;
+        if (cfg->index == 0)
+                goto next_entry;
+        p_dev->conf.ConfigIndex = cfg->index;
+
+        /* Use power settings for Vcc and Vpp if present */
+        /* Note that the CIS values need to be rescaled */
+        if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+                        DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+                        if (!ignore_cis_vcc)
+                                goto next_entry;
+                }
+        } else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
+                        DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+                        if (!ignore_cis_vcc)
+                                goto next_entry;
+                }
+        }
+
+        if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp =
+                        cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+        else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+                p_dev->conf.Vpp =
+                        cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+        /* Do we need to allocate an interrupt? */
+        p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+        /* IO window settings */
+        p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+        if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
+                cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+                p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+                if (!(io->flags & CISTPL_IO_8BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+                if (!(io->flags & CISTPL_IO_16BIT))
+                        p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+                p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+                p_dev->io.BasePort1 = io->win[0].base;
+                p_dev->io.NumPorts1 = io->win[0].len;
+                if (io->nwin > 1) {
+                        p_dev->io.Attributes2 = p_dev->io.Attributes1;
+                        p_dev->io.BasePort2 = io->win[1].base;
+                        p_dev->io.NumPorts2 = io->win[1].len;
+                }
+
+                /* This reserves IO space but doesn't actually enable it */
+                if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+                        goto next_entry;
+        }
+        return 0;
+
+next_entry:
+        pcmcia_disable_device(p_dev);
+        return -ENODEV;
+};
+
 static int
 spectrum_cs_config(struct pcmcia_device *link)
 {
+        struct spectrum_cs_config_data *cfg_mem;
         struct net_device *dev = link->priv;
         struct orinoco_private *priv = netdev_priv(dev);
         struct orinoco_pccard *card = priv->card;
         hermes_t *hw = &priv->hw;
         int last_fn, last_ret;
-        u_char buf[64];
-        config_info_t conf;
-        tuple_t tuple;
-        cisparse_t parse;
         void __iomem *mem;
 
+        cfg_mem = kzalloc(sizeof(struct spectrum_cs_config_data), GFP_KERNEL);
+        if (!cfg_mem)
+                return -ENOMEM;
+
         /* Look up the current Vcc */
         CS_CHECK(GetConfigurationInfo,
-                 pcmcia_get_configuration_info(link, &conf));
+                 pcmcia_get_configuration_info(link, &cfg_mem->conf));
 
         /*
          * In this loop, we scan the CIS for configuration table
@@ -665,94 +738,14 @@ spectrum_cs_config(struct pcmcia_device *link)
          * and most client drivers will only use the CIS to fill in
          * implementation-defined details.
          */
-        tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-        tuple.Attributes = 0;
-        tuple.TupleData = buf;
-        tuple.TupleDataMax = sizeof(buf);
-        tuple.TupleOffset = 0;
-        CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-        while (1) {
-                cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-                cistpl_cftable_entry_t dflt = { .index = 0 };
-
-                if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
-                    || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
-                        goto next_entry;
-
-                if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-                        dflt = *cfg;
-                if (cfg->index == 0)
-                        goto next_entry;
-                link->conf.ConfigIndex = cfg->index;
-
-                /* Use power settings for Vcc and Vpp if present */
-                /* Note that the CIS values need to be rescaled */
-                if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                        if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-                                DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
-                                if (!ignore_cis_vcc)
-                                        goto next_entry;
-                        }
-                } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                        if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
-                                DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
-                                if(!ignore_cis_vcc)
-                                        goto next_entry;
-                        }
-                }
-
-                if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                            cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-                else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-                        link->conf.Vpp =
-                            dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-                
-                /* Do we need to allocate an interrupt? */
-                link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-                /* IO window settings */
-                link->io.NumPorts1 = link->io.NumPorts2 = 0;
-                if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-                        cistpl_io_t *io =
-                            (cfg->io.nwin) ? &cfg->io : &dflt.io;
-                        link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-                        if (!(io->flags & CISTPL_IO_8BIT))
-                                link->io.Attributes1 =
-                                    IO_DATA_PATH_WIDTH_16;
-                        if (!(io->flags & CISTPL_IO_16BIT))
-                                link->io.Attributes1 =
-                                    IO_DATA_PATH_WIDTH_8;
-                        link->io.IOAddrLines =
-                            io->flags & CISTPL_IO_LINES_MASK;
-                        link->io.BasePort1 = io->win[0].base;
-                        link->io.NumPorts1 = io->win[0].len;
-                        if (io->nwin > 1) {
-                                link->io.Attributes2 =
-                                    link->io.Attributes1;
-                                link->io.BasePort2 = io->win[1].base;
-                                link->io.NumPorts2 = io->win[1].len;
-                        }
-
-                        /* This reserves IO space but doesn't actually enable it */
-                        if (pcmcia_request_io(link, &link->io) != 0)
-                                goto next_entry;
-                }
-
-
-                /* If we got this far, we're cool! */
-
-                break;
-                
-        next_entry:
-                pcmcia_disable_device(link);
-                last_ret = pcmcia_get_next_tuple(link, &tuple);
-                if (last_ret  == CS_NO_MORE_ITEMS) {
+        last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, cfg_mem);
+        if (last_ret) {
+                if (!ignore_cis_vcc)
                         printk(KERN_ERR PFX "GetNextTuple(): No matching "
                                "CIS configuration.  Maybe you need the "
                                "ignore_cis_vcc=1 parameter.\n");
-                        goto cs_failed;
-                }
+                cs_error(link, RequestIO, last_ret);
+                goto failed;
         }
 
         /*
@@ -809,6 +802,7 @@ spectrum_cs_config(struct pcmcia_device *link)
                link->irq.AssignedIRQ, link->io.BasePort1,
                link->io.BasePort1 + link->io.NumPorts1 - 1);
 
+        kfree(cfg_mem);
         return 0;
 
  cs_failed:
@@ -816,6 +810,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 
  failed:
         spectrum_cs_release(link);
+        kfree(cfg_mem);
         return -ENODEV;
 }                               /* spectrum_cs_config */