aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorBen Dooks <ben@simtec.co.uk>2009-06-02 09:58:06 -0400
committerGreg Kroah-Hartman <gregkh@suse.de>2009-06-16 00:44:47 -0400
commit5b7d70c6dbf2db786395cbd21750a1a4ce222f84 (patch)
treefc4ed6325af7c6174480d97f22c6dd5a211d6658 /drivers
parent54e4026b64a970303349b952866641a7804ef594 (diff)
USB: Gadget driver for Samsung HS/OtG block
Driver support for the new high-speed/OtG block that is in the newer line of Samsung SoC devices such as the S3C64XX series. This driver does not currntly have DMA support enabled due to issues with buffer alignment which need to be sorted out. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/gadget/Kconfig14
-rw-r--r--drivers/usb/gadget/Makefile1
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c3269
3 files changed, 3284 insertions, 0 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5de9b4f21713..924bb7a1cecf 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -272,6 +272,20 @@ config USB_PXA27X
272 default USB_GADGET 272 default USB_GADGET
273 select USB_GADGET_SELECTED 273 select USB_GADGET_SELECTED
274 274
275config USB_GADGET_S3C_HSOTG
276 boolean "S3C HS/OtG USB Device controller"
277 depends on S3C_DEV_USB_HSOTG
278 select USB_GADGET_S3C_HSOTG_PIO
279 help
280 The Samsung S3C64XX USB2.0 high-speed gadget controller
281 integrated into the S3C64XX series SoC.
282
283config USB_S3C_HSOTG
284 tristate
285 depends on USB_GADGET_S3C_HSOTG
286 default USB_GADGET
287 select USB_GADGET_SELECTED
288
275config USB_GADGET_S3C2410 289config USB_GADGET_S3C2410
276 boolean "S3C2410 USB Device Controller" 290 boolean "S3C2410 USB Device Controller"
277 depends on ARCH_S3C2410 291 depends on ARCH_S3C2410
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index c3fe06396b74..9be2fbd6f5c2 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -25,6 +25,7 @@ endif
25obj-$(CONFIG_USB_M66592) += m66592-udc.o 25obj-$(CONFIG_USB_M66592) += m66592-udc.o
26obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o 26obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
27obj-$(CONFIG_USB_CI13XXX) += ci13xxx_udc.o 27obj-$(CONFIG_USB_CI13XXX) += ci13xxx_udc.o
28obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o
28 29
29# 30#
30# USB gadget drivers 31# USB gadget drivers
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
new file mode 100644
index 000000000000..50c71aae2cc2
--- /dev/null
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -0,0 +1,3269 @@
1/* linux/drivers/usb/gadget/s3c-hsotg.c
2 *
3 * Copyright 2008 Openmoko, Inc.
4 * Copyright 2008 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 * http://armlinux.simtec.co.uk/
7 *
8 * S3C USB2.0 High-speed / OtG driver
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/spinlock.h>
18#include <linux/interrupt.h>
19#include <linux/platform_device.h>
20#include <linux/dma-mapping.h>
21#include <linux/debugfs.h>
22#include <linux/seq_file.h>
23#include <linux/delay.h>
24#include <linux/io.h>
25
26#include <linux/usb/ch9.h>
27#include <linux/usb/gadget.h>
28
29#include <mach/map.h>
30
31#include <plat/regs-usb-hsotg-phy.h>
32#include <plat/regs-usb-hsotg.h>
33#include <plat/regs-sys.h>
34#include <plat/udc-hs.h>
35
36#define DMA_ADDR_INVALID (~((dma_addr_t)0))
37
38/* EP0_MPS_LIMIT
39 *
40 * Unfortunately there seems to be a limit of the amount of data that can
41 * be transfered by IN transactions on EP0. This is either 127 bytes or 3
42 * packets (which practially means 1 packet and 63 bytes of data) when the
43 * MPS is set to 64.
44 *
45 * This means if we are wanting to move >127 bytes of data, we need to
46 * split the transactions up, but just doing one packet at a time does
47 * not work (this may be an implicit DATA0 PID on first packet of the
48 * transaction) and doing 2 packets is outside the controller's limits.
49 *
50 * If we try to lower the MPS size for EP0, then no transfers work properly
51 * for EP0, and the system will fail basic enumeration. As no cause for this
52 * has currently been found, we cannot support any large IN transfers for
53 * EP0.
54 */
55#define EP0_MPS_LIMIT 64
56
57struct s3c_hsotg;
58struct s3c_hsotg_req;
59
60/**
61 * struct s3c_hsotg_ep - driver endpoint definition.
62 * @ep: The gadget layer representation of the endpoint.
63 * @name: The driver generated name for the endpoint.
64 * @queue: Queue of requests for this endpoint.
65 * @parent: Reference back to the parent device structure.
66 * @req: The current request that the endpoint is processing. This is
67 * used to indicate an request has been loaded onto the endpoint
68 * and has yet to be completed (maybe due to data move, or simply
69 * awaiting an ack from the core all the data has been completed).
70 * @debugfs: File entry for debugfs file for this endpoint.
71 * @lock: State lock to protect contents of endpoint.
72 * @dir_in: Set to true if this endpoint is of the IN direction, which
73 * means that it is sending data to the Host.
74 * @index: The index for the endpoint registers.
75 * @name: The name array passed to the USB core.
76 * @halted: Set if the endpoint has been halted.
77 * @periodic: Set if this is a periodic ep, such as Interrupt
78 * @sent_zlp: Set if we've sent a zero-length packet.
79 * @total_data: The total number of data bytes done.
80 * @fifo_size: The size of the FIFO (for periodic IN endpoints)
81 * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
82 * @last_load: The offset of data for the last start of request.
83 * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
84 *
85 * This is the driver's state for each registered enpoint, allowing it
86 * to keep track of transactions that need doing. Each endpoint has a
87 * lock to protect the state, to try and avoid using an overall lock
88 * for the host controller as much as possible.
89 *
90 * For periodic IN endpoints, we have fifo_size and fifo_load to try
91 * and keep track of the amount of data in the periodic FIFO for each
92 * of these as we don't have a status register that tells us how much
93 * is in each of them.
94 */
95struct s3c_hsotg_ep {
96 struct usb_ep ep;
97 struct list_head queue;
98 struct s3c_hsotg *parent;
99 struct s3c_hsotg_req *req;
100 struct dentry *debugfs;
101
102 spinlock_t lock;
103
104 unsigned long total_data;
105 unsigned int size_loaded;
106 unsigned int last_load;
107 unsigned int fifo_load;
108 unsigned short fifo_size;
109
110 unsigned char dir_in;
111 unsigned char index;
112
113 unsigned int halted:1;
114 unsigned int periodic:1;
115 unsigned int sent_zlp:1;
116
117 char name[10];
118};
119
120#define S3C_HSOTG_EPS (8+1) /* limit to 9 for the moment */
121
122/**
123 * struct s3c_hsotg - driver state.
124 * @dev: The parent device supplied to the probe function
125 * @driver: USB gadget driver
126 * @plat: The platform specific configuration data.
127 * @regs: The memory area mapped for accessing registers.
128 * @regs_res: The resource that was allocated when claiming register space.
129 * @irq: The IRQ number we are using
130 * @debug_root: root directrory for debugfs.
131 * @debug_file: main status file for debugfs.
132 * @debug_fifo: FIFO status file for debugfs.
133 * @ep0_reply: Request used for ep0 reply.
134 * @ep0_buff: Buffer for EP0 reply data, if needed.
135 * @ctrl_buff: Buffer for EP0 control requests.
136 * @ctrl_req: Request for EP0 control packets.
137 * @eps: The endpoints being supplied to the gadget framework
138 */
139struct s3c_hsotg {
140 struct device *dev;
141 struct usb_gadget_driver *driver;
142 struct s3c_hsotg_plat *plat;
143
144 void __iomem *regs;
145 struct resource *regs_res;
146 int irq;
147
148 struct dentry *debug_root;
149 struct dentry *debug_file;
150 struct dentry *debug_fifo;
151
152 struct usb_request *ep0_reply;
153 struct usb_request *ctrl_req;
154 u8 ep0_buff[8];
155 u8 ctrl_buff[8];
156
157 struct usb_gadget gadget;
158 struct s3c_hsotg_ep eps[];
159};
160
161/**
162 * struct s3c_hsotg_req - data transfer request
163 * @req: The USB gadget request
164 * @queue: The list of requests for the endpoint this is queued for.
165 * @in_progress: Has already had size/packets written to core
166 * @mapped: DMA buffer for this request has been mapped via dma_map_single().
167 */
168struct s3c_hsotg_req {
169 struct usb_request req;
170 struct list_head queue;
171 unsigned char in_progress;
172 unsigned char mapped;
173};
174
175/* conversion functions */
176static inline struct s3c_hsotg_req *our_req(struct usb_request *req)
177{
178 return container_of(req, struct s3c_hsotg_req, req);
179}
180
181static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep)
182{
183 return container_of(ep, struct s3c_hsotg_ep, ep);
184}
185
186static inline struct s3c_hsotg *to_hsotg(struct usb_gadget *gadget)
187{
188 return container_of(gadget, struct s3c_hsotg, gadget);
189}
190
191static inline void __orr32(void __iomem *ptr, u32 val)
192{
193 writel(readl(ptr) | val, ptr);
194}
195
196static inline void __bic32(void __iomem *ptr, u32 val)
197{
198 writel(readl(ptr) & ~val, ptr);
199}
200
201/* forward decleration of functions */
202static void s3c_hsotg_dump(struct s3c_hsotg *hsotg);
203
204/**
205 * using_dma - return the DMA status of the driver.
206 * @hsotg: The driver state.
207 *
208 * Return true if we're using DMA.
209 *
210 * Currently, we have the DMA support code worked into everywhere
211 * that needs it, but the AMBA DMA implementation in the hardware can
212 * only DMA from 32bit aligned addresses. This means that gadgets such
213 * as the CDC Ethernet cannot work as they often pass packets which are
214 * not 32bit aligned.
215 *
216 * Unfortunately the choice to use DMA or not is global to the controller
217 * and seems to be only settable when the controller is being put through
218 * a core reset. This means we either need to fix the gadgets to take
219 * account of DMA alignment, or add bounce buffers (yuerk).
220 *
221 * Until this issue is sorted out, we always return 'false'.
222 */
223static inline bool using_dma(struct s3c_hsotg *hsotg)
224{
225 return false; /* support is not complete */
226}
227
228/**
229 * s3c_hsotg_en_gsint - enable one or more of the general interrupt
230 * @hsotg: The device state
231 * @ints: A bitmask of the interrupts to enable
232 */
233static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
234{
235 u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
236 u32 new_gsintmsk;
237
238 new_gsintmsk = gsintmsk | ints;
239
240 if (new_gsintmsk != gsintmsk) {
241 dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
242 writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
243 }
244}
245
246/**
247 * s3c_hsotg_disable_gsint - disable one or more of the general interrupt
248 * @hsotg: The device state
249 * @ints: A bitmask of the interrupts to enable
250 */
251static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
252{
253 u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
254 u32 new_gsintmsk;
255
256 new_gsintmsk = gsintmsk & ~ints;
257
258 if (new_gsintmsk != gsintmsk)
259 writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
260}
261
262/**
263 * s3c_hsotg_ctrl_epint - enable/disable an endpoint irq
264 * @hsotg: The device state
265 * @ep: The endpoint index
266 * @dir_in: True if direction is in.
267 * @en: The enable value, true to enable
268 *
269 * Set or clear the mask for an individual endpoint's interrupt
270 * request.
271 */
272static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
273 unsigned int ep, unsigned int dir_in,
274 unsigned int en)
275{
276 unsigned long flags;
277 u32 bit = 1 << ep;
278 u32 daint;
279
280 if (!dir_in)
281 bit <<= 16;
282
283 local_irq_save(flags);
284 daint = readl(hsotg->regs + S3C_DAINTMSK);
285 if (en)
286 daint |= bit;
287 else
288 daint &= ~bit;
289 writel(daint, hsotg->regs + S3C_DAINTMSK);
290 local_irq_restore(flags);
291}
292
293/**
294 * s3c_hsotg_init_fifo - initialise non-periodic FIFOs
295 * @hsotg: The device instance.
296 */
297static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
298{
299 /* the ryu 2.6.24 release ahs
300 writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
301 writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
302 S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
303 hsotg->regs + S3C_GNPTXFSIZ);
304 */
305
306 /* set FIFO sizes to 2048/0x1C0 */
307
308 writel(2048, hsotg->regs + S3C_GRXFSIZ);
309 writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
310 S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
311 hsotg->regs + S3C_GNPTXFSIZ);
312}
313
314/**
315 * @ep: USB endpoint to allocate request for.
316 * @flags: Allocation flags
317 *
318 * Allocate a new USB request structure appropriate for the specified endpoint
319 */
320struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, gfp_t flags)
321{
322 struct s3c_hsotg_req *req;
323
324 req = kzalloc(sizeof(struct s3c_hsotg_req), flags);
325 if (!req)
326 return NULL;
327
328 INIT_LIST_HEAD(&req->queue);
329
330 req->req.dma = DMA_ADDR_INVALID;
331 return &req->req;
332}
333
334/**
335 * is_ep_periodic - return true if the endpoint is in periodic mode.
336 * @hs_ep: The endpoint to query.
337 *
338 * Returns true if the endpoint is in periodic mode, meaning it is being
339 * used for an Interrupt or ISO transfer.
340 */
341static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep)
342{
343 return hs_ep->periodic;
344}
345
346/**
347 * s3c_hsotg_unmap_dma - unmap the DMA memory being used for the request
348 * @hsotg: The device state.
349 * @hs_ep: The endpoint for the request
350 * @hs_req: The request being processed.
351 *
352 * This is the reverse of s3c_hsotg_map_dma(), called for the completion
353 * of a request to ensure the buffer is ready for access by the caller.
354*/
355static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
356 struct s3c_hsotg_ep *hs_ep,
357 struct s3c_hsotg_req *hs_req)
358{
359 struct usb_request *req = &hs_req->req;
360 enum dma_data_direction dir;
361
362 dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
363
364 /* ignore this if we're not moving any data */
365 if (hs_req->req.length == 0)
366 return;
367
368 if (hs_req->mapped) {
369 /* we mapped this, so unmap and remove the dma */
370
371 dma_unmap_single(hsotg->dev, req->dma, req->length, dir);
372
373 req->dma = DMA_ADDR_INVALID;
374 hs_req->mapped = 0;
375 } else {
376 dma_sync_single(hsotg->dev, req->dma, req->length, dir);
377 }
378}
379
380/**
381 * s3c_hsotg_write_fifo - write packet Data to the TxFIFO
382 * @hsotg: The controller state.
383 * @hs_ep: The endpoint we're going to write for.
384 * @hs_req: The request to write data for.
385 *
386 * This is called when the TxFIFO has some space in it to hold a new
387 * transmission and we have something to give it. The actual setup of
388 * the data size is done elsewhere, so all we have to do is to actually
389 * write the data.
390 *
391 * The return value is zero if there is more space (or nothing was done)
392 * otherwise -ENOSPC is returned if the FIFO space was used up.
393 *
394 * This routine is only needed for PIO
395*/
396static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
397 struct s3c_hsotg_ep *hs_ep,
398 struct s3c_hsotg_req *hs_req)
399{
400 bool periodic = is_ep_periodic(hs_ep);
401 u32 gnptxsts = readl(hsotg->regs + S3C_GNPTXSTS);
402 int buf_pos = hs_req->req.actual;
403 int to_write = hs_ep->size_loaded;
404 void *data;
405 int can_write;
406 int pkt_round;
407
408 to_write -= (buf_pos - hs_ep->last_load);
409
410 /* if there's nothing to write, get out early */
411 if (to_write == 0)
412 return 0;
413
414 if (periodic) {
415 u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
416 int size_left;
417 int size_done;
418
419 /* work out how much data was loaded so we can calculate
420 * how much data is left in the fifo. */
421
422 size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
423
424 dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
425 __func__, size_left,
426 hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
427
428 /* how much of the data has moved */
429 size_done = hs_ep->size_loaded - size_left;
430
431 /* how much data is left in the fifo */
432 can_write = hs_ep->fifo_load - size_done;
433 dev_dbg(hsotg->dev, "%s: => can_write1=%d\n",
434 __func__, can_write);
435
436 can_write = hs_ep->fifo_size - can_write;
437 dev_dbg(hsotg->dev, "%s: => can_write2=%d\n",
438 __func__, can_write);
439
440 if (can_write <= 0) {
441 s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
442 return -ENOSPC;
443 }
444 } else {
445 if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
446 dev_dbg(hsotg->dev,
447 "%s: no queue slots available (0x%08x)\n",
448 __func__, gnptxsts);
449
450 s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
451 return -ENOSPC;
452 }
453
454 can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
455 }
456
457 dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
458 __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
459
460 /* limit to 512 bytes of data, it seems at least on the non-periodic
461 * FIFO, requests of >512 cause the endpoint to get stuck with a
462 * fragment of the end of the transfer in it.
463 */
464 if (can_write > 512)
465 can_write = 512;
466
467 /* see if we can write data */
468
469 if (to_write > can_write) {
470 to_write = can_write;
471 pkt_round = to_write % hs_ep->ep.maxpacket;
472
473 /* Not sure, but we probably shouldn't be writing partial
474 * packets into the FIFO, so round the write down to an
475 * exact number of packets.
476 *
477 * Note, we do not currently check to see if we can ever
478 * write a full packet or not to the FIFO.
479 */
480
481 if (pkt_round)
482 to_write -= pkt_round;
483
484 /* enable correct FIFO interrupt to alert us when there
485 * is more room left. */
486
487 s3c_hsotg_en_gsint(hsotg,
488 periodic ? S3C_GINTSTS_PTxFEmp :
489 S3C_GINTSTS_NPTxFEmp);
490 }
491
492 dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
493 to_write, hs_req->req.length, can_write, buf_pos);
494
495 if (to_write <= 0)
496 return -ENOSPC;
497
498 hs_req->req.actual = buf_pos + to_write;
499 hs_ep->total_data += to_write;
500
501 if (periodic)
502 hs_ep->fifo_load += to_write;
503
504 to_write = DIV_ROUND_UP(to_write, 4);
505 data = hs_req->req.buf + buf_pos;
506
507 writesl(hsotg->regs + S3C_EPFIFO(hs_ep->index), data, to_write);
508
509 return (to_write >= can_write) ? -ENOSPC : 0;
510}
511
512/**
513 * get_ep_limit - get the maximum data legnth for this endpoint
514 * @hs_ep: The endpoint
515 *
516 * Return the maximum data that can be queued in one go on a given endpoint
517 * so that transfers that are too long can be split.
518 */
519static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
520{
521 int index = hs_ep->index;
522 unsigned maxsize;
523 unsigned maxpkt;
524
525 if (index != 0) {
526 maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1;
527 maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
528 } else {
529 if (hs_ep->dir_in) {
530 /* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */
531 maxsize = 64+64+1;
532 maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
533 } else {
534 maxsize = 0x3f;
535 maxpkt = 2;
536 }
537 }
538
539 /* we made the constant loading easier above by using +1 */
540 maxpkt--;
541 maxsize--;
542
543 /* constrain by packet count if maxpkts*pktsize is greater
544 * than the length register size. */
545
546 if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
547 maxsize = maxpkt * hs_ep->ep.maxpacket;
548
549 return maxsize;
550}
551
552/**
553 * s3c_hsotg_start_req - start a USB request from an endpoint's queue
554 * @hsotg: The controller state.
555 * @hs_ep: The endpoint to process a request for
556 * @hs_req: The request to start.
557 * @continuing: True if we are doing more for the current request.
558 *
559 * Start the given request running by setting the endpoint registers
560 * appropriately, and writing any data to the FIFOs.
561 */
562static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
563 struct s3c_hsotg_ep *hs_ep,
564 struct s3c_hsotg_req *hs_req,
565 bool continuing)
566{
567 struct usb_request *ureq = &hs_req->req;
568 int index = hs_ep->index;
569 int dir_in = hs_ep->dir_in;
570 u32 epctrl_reg;
571 u32 epsize_reg;
572 u32 epsize;
573 u32 ctrl;
574 unsigned length;
575 unsigned packets;
576 unsigned maxreq;
577
578 if (index != 0) {
579 if (hs_ep->req && !continuing) {
580 dev_err(hsotg->dev, "%s: active request\n", __func__);
581 WARN_ON(1);
582 return;
583 } else if (hs_ep->req != hs_req && continuing) {
584 dev_err(hsotg->dev,
585 "%s: continue different req\n", __func__);
586 WARN_ON(1);
587 return;
588 }
589 }
590
591 epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
592 epsize_reg = dir_in ? S3C_DIEPTSIZ(index) : S3C_DOEPTSIZ(index);
593
594 dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
595 __func__, readl(hsotg->regs + epctrl_reg), index,
596 hs_ep->dir_in ? "in" : "out");
597
598 length = ureq->length - ureq->actual;
599
600 if (0)
601 dev_dbg(hsotg->dev,
602 "REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n",
603 ureq->buf, length, ureq->dma,
604 ureq->no_interrupt, ureq->zero, ureq->short_not_ok);
605
606 maxreq = get_ep_limit(hs_ep);
607 if (length > maxreq) {
608 int round = maxreq % hs_ep->ep.maxpacket;
609
610 dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n",
611 __func__, length, maxreq, round);
612
613 /* round down to multiple of packets */
614 if (round)
615 maxreq -= round;
616
617 length = maxreq;
618 }
619
620 if (length)
621 packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket);
622 else
623 packets = 1; /* send one packet if length is zero. */
624
625 if (dir_in && index != 0)
626 epsize = S3C_DxEPTSIZ_MC(1);
627 else
628 epsize = 0;
629
630 if (index != 0 && ureq->zero) {
631 /* test for the packets being exactly right for the
632 * transfer */
633
634 if (length == (packets * hs_ep->ep.maxpacket))
635 packets++;
636 }
637
638 epsize |= S3C_DxEPTSIZ_PktCnt(packets);
639 epsize |= S3C_DxEPTSIZ_XferSize(length);
640
641 dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n",
642 __func__, packets, length, ureq->length, epsize, epsize_reg);
643
644 /* store the request as the current one we're doing */
645 hs_ep->req = hs_req;
646
647 /* write size / packets */
648 writel(epsize, hsotg->regs + epsize_reg);
649
650 ctrl = readl(hsotg->regs + epctrl_reg);
651
652 if (ctrl & S3C_DxEPCTL_Stall) {
653 dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
654
655 /* not sure what we can do here, if it is EP0 then we should
656 * get this cleared once the endpoint has transmitted the
657 * STALL packet, otherwise it needs to be cleared by the
658 * host.
659 */
660 }
661
662 if (using_dma(hsotg)) {
663 unsigned int dma_reg;
664
665 /* write DMA address to control register, buffer already
666 * synced by s3c_hsotg_ep_queue(). */
667
668 dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index);
669 writel(ureq->dma, hsotg->regs + dma_reg);
670
671 dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n",
672 __func__, ureq->dma, dma_reg);
673 }
674
675 ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
676 ctrl |= S3C_DxEPCTL_USBActEp;
677 ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */
678
679 dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
680 writel(ctrl, hsotg->regs + epctrl_reg);
681
682 /* set these, it seems that DMA support increments past the end
683 * of the packet buffer so we need to calculate the length from
684 * this information. */
685 hs_ep->size_loaded = length;
686 hs_ep->last_load = ureq->actual;
687
688 if (dir_in && !using_dma(hsotg)) {
689 /* set these anyway, we may need them for non-periodic in */
690 hs_ep->fifo_load = 0;
691
692 s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
693 }
694
695 /* clear the INTknTXFEmpMsk when we start request, more as a aide
696 * to debugging to see what is going on. */
697 if (dir_in)
698 writel(S3C_DIEPMSK_INTknTXFEmpMsk,
699 hsotg->regs + S3C_DIEPINT(index));
700
701 /* Note, trying to clear the NAK here causes problems with transmit
702 * on the S3C6400 ending up with the TXFIFO becomming full. */
703
704 /* check ep is enabled */
705 if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
706 dev_warn(hsotg->dev,
707 "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n",
708 index, readl(hsotg->regs + epctrl_reg));
709
710 dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n",
711 __func__, readl(hsotg->regs + epctrl_reg));
712}
713
714/**
715 * s3c_hsotg_map_dma - map the DMA memory being used for the request
716 * @hsotg: The device state.
717 * @hs_ep: The endpoint the request is on.
718 * @req: The request being processed.
719 *
720 * We've been asked to queue a request, so ensure that the memory buffer
721 * is correctly setup for DMA. If we've been passed an extant DMA address
722 * then ensure the buffer has been synced to memory. If our buffer has no
723 * DMA memory, then we map the memory and mark our request to allow us to
724 * cleanup on completion.
725*/
726static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
727 struct s3c_hsotg_ep *hs_ep,
728 struct usb_request *req)
729{
730 enum dma_data_direction dir;
731 struct s3c_hsotg_req *hs_req = our_req(req);
732
733 dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
734
735 /* if the length is zero, ignore the DMA data */
736 if (hs_req->req.length == 0)
737 return 0;
738
739 if (req->dma == DMA_ADDR_INVALID) {
740 dma_addr_t dma;
741
742 dma = dma_map_single(hsotg->dev, req->buf, req->length, dir);
743
744 if (unlikely(dma_mapping_error(hsotg->dev, dma)))
745 goto dma_error;
746
747 if (dma & 3) {
748 dev_err(hsotg->dev, "%s: unaligned dma buffer\n",
749 __func__);
750
751 dma_unmap_single(hsotg->dev, dma, req->length, dir);
752 return -EINVAL;
753 }
754
755 hs_req->mapped = 1;
756 req->dma = dma;
757 } else {
758 dma_sync_single(hsotg->dev, req->dma, req->length, dir);
759 hs_req->mapped = 0;
760 }
761
762 return 0;
763
764dma_error:
765 dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n",
766 __func__, req->buf, req->length);
767
768 return -EIO;
769}
770
771static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
772 gfp_t gfp_flags)
773{
774 struct s3c_hsotg_req *hs_req = our_req(req);
775 struct s3c_hsotg_ep *hs_ep = our_ep(ep);
776 struct s3c_hsotg *hs = hs_ep->parent;
777 unsigned long irqflags;
778 bool first;
779
780 dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
781 ep->name, req, req->length, req->buf, req->no_interrupt,
782 req->zero, req->short_not_ok);
783
784 /* initialise status of the request */
785 INIT_LIST_HEAD(&hs_req->queue);
786 req->actual = 0;
787 req->status = -EINPROGRESS;
788
789 /* if we're using DMA, sync the buffers as necessary */
790 if (using_dma(hs)) {
791 int ret = s3c_hsotg_map_dma(hs, hs_ep, req);
792 if (ret)
793 return ret;
794 }
795
796 spin_lock_irqsave(&hs_ep->lock, irqflags);
797
798 first = list_empty(&hs_ep->queue);
799 list_add_tail(&hs_req->queue, &hs_ep->queue);
800
801 if (first)
802 s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
803
804 spin_unlock_irqrestore(&hs_ep->lock, irqflags);
805
806 return 0;
807}
808
809static void s3c_hsotg_ep_free_request(struct usb_ep *ep,
810 struct usb_request *req)
811{
812 struct s3c_hsotg_req *hs_req = our_req(req);
813
814 kfree(hs_req);
815}
816
817/**
818 * s3c_hsotg_complete_oursetup - setup completion callback
819 * @ep: The endpoint the request was on.
820 * @req: The request completed.
821 *
822 * Called on completion of any requests the driver itself
823 * submitted that need cleaning up.
824 */
825static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
826 struct usb_request *req)
827{
828 struct s3c_hsotg_ep *hs_ep = our_ep(ep);
829 struct s3c_hsotg *hsotg = hs_ep->parent;
830
831 dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
832
833 s3c_hsotg_ep_free_request(ep, req);
834}
835
836/**
837 * ep_from_windex - convert control wIndex value to endpoint
838 * @hsotg: The driver state.
839 * @windex: The control request wIndex field (in host order).
840 *
841 * Convert the given wIndex into a pointer to an driver endpoint
842 * structure, or return NULL if it is not a valid endpoint.
843*/
844static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
845 u32 windex)
846{
847 struct s3c_hsotg_ep *ep = &hsotg->eps[windex & 0x7F];
848 int dir = (windex & USB_DIR_IN) ? 1 : 0;
849 int idx = windex & 0x7F;
850
851 if (windex >= 0x100)
852 return NULL;
853
854 if (idx > S3C_HSOTG_EPS)
855 return NULL;
856
857 if (idx && ep->dir_in != dir)
858 return NULL;
859
860 return ep;
861}
862
863/**
864 * s3c_hsotg_send_reply - send reply to control request
865 * @hsotg: The device state
866 * @ep: Endpoint 0
867 * @buff: Buffer for request
868 * @length: Length of reply.
869 *
870 * Create a request and queue it on the given endpoint. This is useful as
871 * an internal method of sending replies to certain control requests, etc.
872 */
873static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg,
874 struct s3c_hsotg_ep *ep,
875 void *buff,
876 int length)
877{
878 struct usb_request *req;
879 int ret;
880
881 dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length);
882
883 req = s3c_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC);
884 hsotg->ep0_reply = req;
885 if (!req) {
886 dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__);
887 return -ENOMEM;
888 }
889
890 req->buf = hsotg->ep0_buff;
891 req->length = length;
892 req->zero = 1; /* always do zero-length final transfer */
893 req->complete = s3c_hsotg_complete_oursetup;
894
895 if (length)
896 memcpy(req->buf, buff, length);
897 else
898 ep->sent_zlp = 1;
899
900 ret = s3c_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC);
901 if (ret) {
902 dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__);
903 return ret;
904 }
905
906 return 0;
907}
908
909/**
910 * s3c_hsotg_process_req_status - process request GET_STATUS
911 * @hsotg: The device state
912 * @ctrl: USB control request
913 */
914static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg,
915 struct usb_ctrlrequest *ctrl)
916{
917 struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
918 struct s3c_hsotg_ep *ep;
919 __le16 reply;
920 int ret;
921
922 dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__);
923
924 if (!ep0->dir_in) {
925 dev_warn(hsotg->dev, "%s: direction out?\n", __func__);
926 return -EINVAL;
927 }
928
929 switch (ctrl->bRequestType & USB_RECIP_MASK) {
930 case USB_RECIP_DEVICE:
931 reply = cpu_to_le16(0); /* bit 0 => self powered,
932 * bit 1 => remote wakeup */
933 break;
934
935 case USB_RECIP_INTERFACE:
936 /* currently, the data result should be zero */
937 reply = cpu_to_le16(0);
938 break;
939
940 case USB_RECIP_ENDPOINT:
941 ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
942 if (!ep)
943 return -ENOENT;
944
945 reply = cpu_to_le16(ep->halted ? 1 : 0);
946 break;
947
948 default:
949 return 0;
950 }
951
952 if (le16_to_cpu(ctrl->wLength) != 2)
953 return -EINVAL;
954
955 ret = s3c_hsotg_send_reply(hsotg, ep0, &reply, 2);
956 if (ret) {
957 dev_err(hsotg->dev, "%s: failed to send reply\n", __func__);
958 return ret;
959 }
960
961 return 1;
962}
963
964static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value);
965
966/**
967 * s3c_hsotg_process_req_featire - process request {SET,CLEAR}_FEATURE
968 * @hsotg: The device state
969 * @ctrl: USB control request
970 */
971static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
972 struct usb_ctrlrequest *ctrl)
973{
974 bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
975 struct s3c_hsotg_ep *ep;
976
977 dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
978 __func__, set ? "SET" : "CLEAR");
979
980 if (ctrl->bRequestType == USB_RECIP_ENDPOINT) {
981 ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
982 if (!ep) {
983 dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n",
984 __func__, le16_to_cpu(ctrl->wIndex));
985 return -ENOENT;
986 }
987
988 switch (le16_to_cpu(ctrl->wValue)) {
989 case USB_ENDPOINT_HALT:
990 s3c_hsotg_ep_sethalt(&ep->ep, set);
991 break;
992
993 default:
994 return -ENOENT;
995 }
996 } else
997 return -ENOENT; /* currently only deal with endpoint */
998
999 return 1;
1000}
1001
1002/**
1003 * s3c_hsotg_process_control - process a control request
1004 * @hsotg: The device state
1005 * @ctrl: The control request received
1006 *
1007 * The controller has received the SETUP phase of a control request, and
1008 * needs to work out what to do next (and whether to pass it on to the
1009 * gadget driver).
1010 */
1011static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
1012 struct usb_ctrlrequest *ctrl)
1013{
1014 struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
1015 int ret = 0;
1016 u32 dcfg;
1017
1018 ep0->sent_zlp = 0;
1019
1020 dev_dbg(hsotg->dev, "ctrl Req=%02x, Type=%02x, V=%04x, L=%04x\n",
1021 ctrl->bRequest, ctrl->bRequestType,
1022 ctrl->wValue, ctrl->wLength);
1023
1024 /* record the direction of the request, for later use when enquing
1025 * packets onto EP0. */
1026
1027 ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0;
1028 dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in);
1029
1030 /* if we've no data with this request, then the last part of the
1031 * transaction is going to implicitly be IN. */
1032 if (ctrl->wLength == 0)
1033 ep0->dir_in = 1;
1034
1035 if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
1036 switch (ctrl->bRequest) {
1037 case USB_REQ_SET_ADDRESS:
1038 dcfg = readl(hsotg->regs + S3C_DCFG);
1039 dcfg &= ~S3C_DCFG_DevAddr_MASK;
1040 dcfg |= ctrl->wValue << S3C_DCFG_DevAddr_SHIFT;
1041 writel(dcfg, hsotg->regs + S3C_DCFG);
1042
1043 dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
1044
1045 ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
1046 return;
1047
1048 case USB_REQ_GET_STATUS:
1049 ret = s3c_hsotg_process_req_status(hsotg, ctrl);
1050 break;
1051
1052 case USB_REQ_CLEAR_FEATURE:
1053 case USB_REQ_SET_FEATURE:
1054 ret = s3c_hsotg_process_req_feature(hsotg, ctrl);
1055 break;
1056 }
1057 }
1058
1059 /* as a fallback, try delivering it to the driver to deal with */
1060
1061 if (ret == 0 && hsotg->driver) {
1062 ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
1063 if (ret < 0)
1064 dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
1065 }
1066
1067 if (ret > 0) {
1068 if (!ep0->dir_in) {
1069 /* need to generate zlp in reply or take data */
1070 /* todo - deal with any data we might be sent? */
1071 ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
1072 }
1073 }
1074
1075 /* the request is either unhandlable, or is not formatted correctly
1076 * so respond with a STALL for the status stage to indicate failure.
1077 */
1078
1079 if (ret < 0) {
1080 u32 reg;
1081 u32 ctrl;
1082
1083 dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
1084 reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0;
1085
1086 /* S3C_DxEPCTL_Stall will be cleared by EP once it has
1087 * taken effect, so no need to clear later. */
1088
1089 ctrl = readl(hsotg->regs + reg);
1090 ctrl |= S3C_DxEPCTL_Stall;
1091 ctrl |= S3C_DxEPCTL_CNAK;
1092 writel(ctrl, hsotg->regs + reg);
1093
1094 dev_dbg(hsotg->dev,
1095 "writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
1096 ctrl, reg, readl(hsotg->regs + reg));
1097
1098 /* don't belive we need to anything more to get the EP
1099 * to reply with a STALL packet */
1100 }
1101}
1102
1103static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
1104
1105/**
1106 * s3c_hsotg_complete_setup - completion of a setup transfer
1107 * @ep: The endpoint the request was on.
1108 * @req: The request completed.
1109 *
1110 * Called on completion of any requests the driver itself submitted for
1111 * EP0 setup packets
1112 */
1113static void s3c_hsotg_complete_setup(struct usb_ep *ep,
1114 struct usb_request *req)
1115{
1116 struct s3c_hsotg_ep *hs_ep = our_ep(ep);
1117 struct s3c_hsotg *hsotg = hs_ep->parent;
1118
1119 if (req->status < 0) {
1120 dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
1121 return;
1122 }
1123
1124 if (req->actual == 0)
1125 s3c_hsotg_enqueue_setup(hsotg);
1126 else
1127 s3c_hsotg_process_control(hsotg, req->buf);
1128}
1129
1130/**
1131 * s3c_hsotg_enqueue_setup - start a request for EP0 packets
1132 * @hsotg: The device state.
1133 *
1134 * Enqueue a request on EP0 if necessary to received any SETUP packets
1135 * received from the host.
1136 */
1137static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
1138{
1139 struct usb_request *req = hsotg->ctrl_req;
1140 struct s3c_hsotg_req *hs_req = our_req(req);
1141 int ret;
1142
1143 dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__);
1144
1145 req->zero = 0;
1146 req->length = 8;
1147 req->buf = hsotg->ctrl_buff;
1148 req->complete = s3c_hsotg_complete_setup;
1149
1150 if (!list_empty(&hs_req->queue)) {
1151 dev_dbg(hsotg->dev, "%s already queued???\n", __func__);
1152 return;
1153 }
1154
1155 hsotg->eps[0].dir_in = 0;
1156
1157 ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC);
1158 if (ret < 0) {
1159 dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
1160 /* Don't think there's much we can do other than watch the
1161 * driver fail. */
1162 }
1163}
1164
1165/**
1166 * get_ep_head - return the first request on the endpoint
1167 * @hs_ep: The controller endpoint to get
1168 *
1169 * Get the first request on the endpoint.
1170*/
1171static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
1172{
1173 if (list_empty(&hs_ep->queue))
1174 return NULL;
1175
1176 return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue);
1177}
1178
1179/**
1180 * s3c_hsotg_complete_request - complete a request given to us
1181 * @hsotg: The device state.
1182 * @hs_ep: The endpoint the request was on.
1183 * @hs_req: The request to complete.
1184 * @result: The result code (0 => Ok, otherwise errno)
1185 *
1186 * The given request has finished, so call the necessary completion
1187 * if it has one and then look to see if we can start a new request
1188 * on the endpoint.
1189 *
1190 * Note, expects the ep to already be locked as appropriate.
1191*/
1192static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
1193 struct s3c_hsotg_ep *hs_ep,
1194 struct s3c_hsotg_req *hs_req,
1195 int result)
1196{
1197 bool restart;
1198
1199 if (!hs_req) {
1200 dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
1201 return;
1202 }
1203
1204 dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
1205 hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
1206
1207 /* only replace the status if we've not already set an error
1208 * from a previous transaction */
1209
1210 if (hs_req->req.status == -EINPROGRESS)
1211 hs_req->req.status = result;
1212
1213 hs_ep->req = NULL;
1214 list_del_init(&hs_req->queue);
1215
1216 if (using_dma(hsotg))
1217 s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
1218
1219 /* call the complete request with the locks off, just in case the
1220 * request tries to queue more work for this endpoint. */
1221
1222 if (hs_req->req.complete) {
1223 spin_unlock(&hs_ep->lock);
1224 hs_req->req.complete(&hs_ep->ep, &hs_req->req);
1225 spin_lock(&hs_ep->lock);
1226 }
1227
1228 /* Look to see if there is anything else to do. Note, the completion
1229 * of the previous request may have caused a new request to be started
1230 * so be careful when doing this. */
1231
1232 if (!hs_ep->req && result >= 0) {
1233 restart = !list_empty(&hs_ep->queue);
1234 if (restart) {
1235 hs_req = get_ep_head(hs_ep);
1236 s3c_hsotg_start_req(hsotg, hs_ep, hs_req, false);
1237 }
1238 }
1239}
1240
1241/**
1242 * s3c_hsotg_complete_request_lock - complete a request given to us (locked)
1243 * @hsotg: The device state.
1244 * @hs_ep: The endpoint the request was on.
1245 * @hs_req: The request to complete.
1246 * @result: The result code (0 => Ok, otherwise errno)
1247 *
1248 * See s3c_hsotg_complete_request(), but called with the endpoint's
1249 * lock held.
1250*/
1251static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
1252 struct s3c_hsotg_ep *hs_ep,
1253 struct s3c_hsotg_req *hs_req,
1254 int result)
1255{
1256 unsigned long flags;
1257
1258 spin_lock_irqsave(&hs_ep->lock, flags);
1259 s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
1260 spin_unlock_irqrestore(&hs_ep->lock, flags);
1261}
1262
1263/**
1264 * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint
1265 * @hsotg: The device state.
1266 * @ep_idx: The endpoint index for the data
1267 * @size: The size of data in the fifo, in bytes
1268 *
1269 * The FIFO status shows there is data to read from the FIFO for a given
1270 * endpoint, so sort out whether we need to read the data into a request
1271 * that has been made for that endpoint.
1272 */
1273static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
1274{
1275 struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx];
1276 struct s3c_hsotg_req *hs_req = hs_ep->req;
1277 void __iomem *fifo = hsotg->regs + S3C_EPFIFO(ep_idx);
1278 int to_read;
1279 int max_req;
1280 int read_ptr;
1281
1282 if (!hs_req) {
1283 u32 epctl = readl(hsotg->regs + S3C_DOEPCTL(ep_idx));
1284 int ptr;
1285
1286 dev_warn(hsotg->dev,
1287 "%s: FIFO %d bytes on ep%d but no req (DxEPCTl=0x%08x)\n",
1288 __func__, size, ep_idx, epctl);
1289
1290 /* dump the data from the FIFO, we've nothing we can do */
1291 for (ptr = 0; ptr < size; ptr += 4)
1292 (void)readl(fifo);
1293
1294 return;
1295 }
1296
1297 spin_lock(&hs_ep->lock);
1298
1299 to_read = size;
1300 read_ptr = hs_req->req.actual;
1301 max_req = hs_req->req.length - read_ptr;
1302
1303 if (to_read > max_req) {
1304 /* more data appeared than we where willing
1305 * to deal with in this request.
1306 */
1307
1308 /* currently we don't deal this */
1309 WARN_ON_ONCE(1);
1310 }
1311
1312 dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
1313 __func__, to_read, max_req, read_ptr, hs_req->req.length);
1314
1315 hs_ep->total_data += to_read;
1316 hs_req->req.actual += to_read;
1317 to_read = DIV_ROUND_UP(to_read, 4);
1318
1319 /* note, we might over-write the buffer end by 3 bytes depending on
1320 * alignment of the data. */
1321 readsl(fifo, hs_req->req.buf + read_ptr, to_read);
1322
1323 spin_unlock(&hs_ep->lock);
1324}
1325
1326/**
1327 * s3c_hsotg_send_zlp - send zero-length packet on control endpoint
1328 * @hsotg: The device instance
1329 * @req: The request currently on this endpoint
1330 *
1331 * Generate a zero-length IN packet request for terminating a SETUP
1332 * transaction.
1333 *
1334 * Note, since we don't write any data to the TxFIFO, then it is
1335 * currently belived that we do not need to wait for any space in
1336 * the TxFIFO.
1337 */
1338static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
1339 struct s3c_hsotg_req *req)
1340{
1341 u32 ctrl;
1342
1343 if (!req) {
1344 dev_warn(hsotg->dev, "%s: no request?\n", __func__);
1345 return;
1346 }
1347
1348 if (req->req.length == 0) {
1349 hsotg->eps[0].sent_zlp = 1;
1350 s3c_hsotg_enqueue_setup(hsotg);
1351 return;
1352 }
1353
1354 hsotg->eps[0].dir_in = 1;
1355 hsotg->eps[0].sent_zlp = 1;
1356
1357 dev_dbg(hsotg->dev, "sending zero-length packet\n");
1358
1359 /* issue a zero-sized packet to terminate this */
1360 writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
1361 S3C_DxEPTSIZ_XferSize(0), hsotg->regs + S3C_DIEPTSIZ(0));
1362
1363 ctrl = readl(hsotg->regs + S3C_DIEPCTL0);
1364 ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */
1365 ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
1366 ctrl |= S3C_DxEPCTL_USBActEp;
1367 writel(ctrl, hsotg->regs + S3C_DIEPCTL0);
1368}
1369
1370/**
1371 * s3c_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO
1372 * @hsotg: The device instance
1373 * @epnum: The endpoint received from
1374 * @was_setup: Set if processing a SetupDone event.
1375 *
1376 * The RXFIFO has delivered an OutDone event, which means that the data
1377 * transfer for an OUT endpoint has been completed, either by a short
1378 * packet or by the finish of a transfer.
1379*/
1380static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
1381 int epnum, bool was_setup)
1382{
1383 struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
1384 struct s3c_hsotg_req *hs_req = hs_ep->req;
1385 struct usb_request *req = &hs_req->req;
1386 int result = 0;
1387
1388 if (!hs_req) {
1389 dev_dbg(hsotg->dev, "%s: no request active\n", __func__);
1390 return;
1391 }
1392
1393 if (using_dma(hsotg)) {
1394 u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
1395 unsigned size_done;
1396 unsigned size_left;
1397
1398 /* Calculate the size of the transfer by checking how much
1399 * is left in the endpoint size register and then working it
1400 * out from the amount we loaded for the transfer.
1401 *
1402 * We need to do this as DMA pointers are always 32bit aligned
1403 * so may overshoot/undershoot the transfer.
1404 */
1405
1406 size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
1407
1408 size_done = hs_ep->size_loaded - size_left;
1409 size_done += hs_ep->last_load;
1410
1411 req->actual = size_done;
1412 }
1413
1414 if (req->actual < req->length && req->short_not_ok) {
1415 dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
1416 __func__, req->actual, req->length);
1417
1418 /* todo - what should we return here? there's no one else
1419 * even bothering to check the status. */
1420 }
1421
1422 if (epnum == 0) {
1423 if (!was_setup && req->complete != s3c_hsotg_complete_setup)
1424 s3c_hsotg_send_zlp(hsotg, hs_req);
1425 }
1426
1427 s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, result);
1428}
1429
1430/**
1431 * s3c_hsotg_read_frameno - read current frame number
1432 * @hsotg: The device instance
1433 *
1434 * Return the current frame number
1435*/
1436static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
1437{
1438 u32 dsts;
1439
1440 dsts = readl(hsotg->regs + S3C_DSTS);
1441 dsts &= S3C_DSTS_SOFFN_MASK;
1442 dsts >>= S3C_DSTS_SOFFN_SHIFT;
1443
1444 return dsts;
1445}
1446
1447/**
1448 * s3c_hsotg_handle_rx - RX FIFO has data
1449 * @hsotg: The device instance
1450 *
1451 * The IRQ handler has detected that the RX FIFO has some data in it
1452 * that requires processing, so find out what is in there and do the
1453 * appropriate read.
1454 *
1455 * The RXFIFO is a true FIFO, the packets comming out are still in packet
1456 * chunks, so if you have x packets received on an endpoint you'll get x
1457 * FIFO events delivered, each with a packet's worth of data in it.
1458 *
1459 * When using DMA, we should not be processing events from the RXFIFO
1460 * as the actual data should be sent to the memory directly and we turn
1461 * on the completion interrupts to get notifications of transfer completion.
1462 */
1463void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
1464{
1465 u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP);
1466 u32 epnum, status, size;
1467
1468 WARN_ON(using_dma(hsotg));
1469
1470 epnum = grxstsr & S3C_GRXSTS_EPNum_MASK;
1471 status = grxstsr & S3C_GRXSTS_PktSts_MASK;
1472
1473 size = grxstsr & S3C_GRXSTS_ByteCnt_MASK;
1474 size >>= S3C_GRXSTS_ByteCnt_SHIFT;
1475
1476 if (1)
1477 dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n",
1478 __func__, grxstsr, size, epnum);
1479
1480#define __status(x) ((x) >> S3C_GRXSTS_PktSts_SHIFT)
1481
1482 switch (status >> S3C_GRXSTS_PktSts_SHIFT) {
1483 case __status(S3C_GRXSTS_PktSts_GlobalOutNAK):
1484 dev_dbg(hsotg->dev, "GlobalOutNAK\n");
1485 break;
1486
1487 case __status(S3C_GRXSTS_PktSts_OutDone):
1488 dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n",
1489 s3c_hsotg_read_frameno(hsotg));
1490
1491 if (!using_dma(hsotg))
1492 s3c_hsotg_handle_outdone(hsotg, epnum, false);
1493 break;
1494
1495 case __status(S3C_GRXSTS_PktSts_SetupDone):
1496 dev_dbg(hsotg->dev,
1497 "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
1498 s3c_hsotg_read_frameno(hsotg),
1499 readl(hsotg->regs + S3C_DOEPCTL(0)));
1500
1501 s3c_hsotg_handle_outdone(hsotg, epnum, true);
1502 break;
1503
1504 case __status(S3C_GRXSTS_PktSts_OutRX):
1505 s3c_hsotg_rx_data(hsotg, epnum, size);
1506 break;
1507
1508 case __status(S3C_GRXSTS_PktSts_SetupRX):
1509 dev_dbg(hsotg->dev,
1510 "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
1511 s3c_hsotg_read_frameno(hsotg),
1512 readl(hsotg->regs + S3C_DOEPCTL(0)));
1513
1514 s3c_hsotg_rx_data(hsotg, epnum, size);
1515 break;
1516
1517 default:
1518 dev_warn(hsotg->dev, "%s: unknown status %08x\n",
1519 __func__, grxstsr);
1520
1521 s3c_hsotg_dump(hsotg);
1522 break;
1523 }
1524}
1525
1526/**
1527 * s3c_hsotg_ep0_mps - turn max packet size into register setting
1528 * @mps: The maximum packet size in bytes.
1529*/
1530static u32 s3c_hsotg_ep0_mps(unsigned int mps)
1531{
1532 switch (mps) {
1533 case 64:
1534 return S3C_D0EPCTL_MPS_64;
1535 case 32:
1536 return S3C_D0EPCTL_MPS_32;
1537 case 16:
1538 return S3C_D0EPCTL_MPS_16;
1539 case 8:
1540 return S3C_D0EPCTL_MPS_8;
1541 }
1542
1543 /* bad max packet size, warn and return invalid result */
1544 WARN_ON(1);
1545 return (u32)-1;
1546}
1547
1548/**
1549 * s3c_hsotg_set_ep_maxpacket - set endpoint's max-packet field
1550 * @hsotg: The driver state.
1551 * @ep: The index number of the endpoint
1552 * @mps: The maximum packet size in bytes
1553 *
1554 * Configure the maximum packet size for the given endpoint, updating
1555 * the hardware control registers to reflect this.
1556 */
1557static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
1558 unsigned int ep, unsigned int mps)
1559{
1560 struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
1561 void __iomem *regs = hsotg->regs;
1562 u32 mpsval;
1563 u32 reg;
1564
1565 if (ep == 0) {
1566 /* EP0 is a special case */
1567 mpsval = s3c_hsotg_ep0_mps(mps);
1568 if (mpsval > 3)
1569 goto bad_mps;
1570 } else {
1571 if (mps >= S3C_DxEPCTL_MPS_LIMIT+1)
1572 goto bad_mps;
1573
1574 mpsval = mps;
1575 }
1576
1577 hs_ep->ep.maxpacket = mps;
1578
1579 /* update both the in and out endpoint controldir_ registers, even
1580 * if one of the directions may not be in use. */
1581
1582 reg = readl(regs + S3C_DIEPCTL(ep));
1583 reg &= ~S3C_DxEPCTL_MPS_MASK;
1584 reg |= mpsval;
1585 writel(reg, regs + S3C_DIEPCTL(ep));
1586
1587 reg = readl(regs + S3C_DOEPCTL(ep));
1588 reg &= ~S3C_DxEPCTL_MPS_MASK;
1589 reg |= mpsval;
1590 writel(reg, regs + S3C_DOEPCTL(ep));
1591
1592 return;
1593
1594bad_mps:
1595 dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps);
1596}
1597
1598
1599/**
1600 * s3c_hsotg_trytx - check to see if anything needs transmitting
1601 * @hsotg: The driver state
1602 * @hs_ep: The driver endpoint to check.
1603 *
1604 * Check to see if there is a request that has data to send, and if so
1605 * make an attempt to write data into the FIFO.
1606 */
1607static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
1608 struct s3c_hsotg_ep *hs_ep)
1609{
1610 struct s3c_hsotg_req *hs_req = hs_ep->req;
1611
1612 if (!hs_ep->dir_in || !hs_req)
1613 return 0;
1614
1615 if (hs_req->req.actual < hs_req->req.length) {
1616 dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
1617 hs_ep->index);
1618 return s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
1619 }
1620
1621 return 0;
1622}
1623
1624/**
1625 * s3c_hsotg_complete_in - complete IN transfer
1626 * @hsotg: The device state.
1627 * @hs_ep: The endpoint that has just completed.
1628 *
1629 * An IN transfer has been completed, update the transfer's state and then
1630 * call the relevant completion routines.
1631 */
1632static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
1633 struct s3c_hsotg_ep *hs_ep)
1634{
1635 struct s3c_hsotg_req *hs_req = hs_ep->req;
1636 u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
1637 int size_left, size_done;
1638
1639 if (!hs_req) {
1640 dev_dbg(hsotg->dev, "XferCompl but no req\n");
1641 return;
1642 }
1643
1644 /* Calculate the size of the transfer by checking how much is left
1645 * in the endpoint size register and then working it out from
1646 * the amount we loaded for the transfer.
1647 *
1648 * We do this even for DMA, as the transfer may have incremented
1649 * past the end of the buffer (DMA transfers are always 32bit
1650 * aligned).
1651 */
1652
1653 size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
1654
1655 size_done = hs_ep->size_loaded - size_left;
1656 size_done += hs_ep->last_load;
1657
1658 if (hs_req->req.actual != size_done)
1659 dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n",
1660 __func__, hs_req->req.actual, size_done);
1661
1662 hs_req->req.actual = size_done;
1663
1664 /* if we did all of the transfer, and there is more data left
1665 * around, then try restarting the rest of the request */
1666
1667 if (!size_left && hs_req->req.actual < hs_req->req.length) {
1668 dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
1669 s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
1670 } else
1671 s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
1672}
1673
1674/**
1675 * s3c_hsotg_epint - handle an in/out endpoint interrupt
1676 * @hsotg: The driver state
1677 * @idx: The index for the endpoint (0..15)
1678 * @dir_in: Set if this is an IN endpoint
1679 *
1680 * Process and clear any interrupt pending for an individual endpoint
1681*/
1682static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
1683 int dir_in)
1684{
1685 struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx];
1686 u32 epint_reg = dir_in ? S3C_DIEPINT(idx) : S3C_DOEPINT(idx);
1687 u32 epctl_reg = dir_in ? S3C_DIEPCTL(idx) : S3C_DOEPCTL(idx);
1688 u32 epsiz_reg = dir_in ? S3C_DIEPTSIZ(idx) : S3C_DOEPTSIZ(idx);
1689 u32 ints;
1690 u32 clear = 0;
1691
1692 ints = readl(hsotg->regs + epint_reg);
1693
1694 dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
1695 __func__, idx, dir_in ? "in" : "out", ints);
1696
1697 if (ints & S3C_DxEPINT_XferCompl) {
1698 dev_dbg(hsotg->dev,
1699 "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
1700 __func__, readl(hsotg->regs + epctl_reg),
1701 readl(hsotg->regs + epsiz_reg));
1702
1703 /* we get OutDone from the FIFO, so we only need to look
1704 * at completing IN requests here */
1705 if (dir_in) {
1706 s3c_hsotg_complete_in(hsotg, hs_ep);
1707
1708 if (idx == 0)
1709 s3c_hsotg_enqueue_setup(hsotg);
1710 } else if (using_dma(hsotg)) {
1711 /* We're using DMA, we need to fire an OutDone here
1712 * as we ignore the RXFIFO. */
1713
1714 s3c_hsotg_handle_outdone(hsotg, idx, false);
1715 }
1716
1717 clear |= S3C_DxEPINT_XferCompl;
1718 }
1719
1720 if (ints & S3C_DxEPINT_EPDisbld) {
1721 dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
1722 clear |= S3C_DxEPINT_EPDisbld;
1723 }
1724
1725 if (ints & S3C_DxEPINT_AHBErr) {
1726 dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
1727 clear |= S3C_DxEPINT_AHBErr;
1728 }
1729
1730 if (ints & S3C_DxEPINT_Setup) { /* Setup or Timeout */
1731 dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__);
1732
1733 if (using_dma(hsotg) && idx == 0) {
1734 /* this is the notification we've received a
1735 * setup packet. In non-DMA mode we'd get this
1736 * from the RXFIFO, instead we need to process
1737 * the setup here. */
1738
1739 if (dir_in)
1740 WARN_ON_ONCE(1);
1741 else
1742 s3c_hsotg_handle_outdone(hsotg, 0, true);
1743 }
1744
1745 clear |= S3C_DxEPINT_Setup;
1746 }
1747
1748 if (ints & S3C_DxEPINT_Back2BackSetup) {
1749 dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
1750 clear |= S3C_DxEPINT_Back2BackSetup;
1751 }
1752
1753 if (dir_in) {
1754 /* not sure if this is important, but we'll clear it anyway
1755 */
1756 if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) {
1757 dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
1758 __func__, idx);
1759 clear |= S3C_DIEPMSK_INTknTXFEmpMsk;
1760 }
1761
1762 /* this probably means something bad is happening */
1763 if (ints & S3C_DIEPMSK_INTknEPMisMsk) {
1764 dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
1765 __func__, idx);
1766 clear |= S3C_DIEPMSK_INTknEPMisMsk;
1767 }
1768 }
1769
1770 writel(clear, hsotg->regs + epint_reg);
1771}
1772
1773/**
1774 * s3c_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done)
1775 * @hsotg: The device state.
1776 *
1777 * Handle updating the device settings after the enumeration phase has
1778 * been completed.
1779*/
1780static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
1781{
1782 u32 dsts = readl(hsotg->regs + S3C_DSTS);
1783 int ep0_mps = 0, ep_mps;
1784
1785 /* This should signal the finish of the enumeration phase
1786 * of the USB handshaking, so we should now know what rate
1787 * we connected at. */
1788
1789 dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
1790
1791 /* note, since we're limited by the size of transfer on EP0, and
1792 * it seems IN transfers must be a even number of packets we do
1793 * not advertise a 64byte MPS on EP0. */
1794
1795 /* catch both EnumSpd_FS and EnumSpd_FS48 */
1796 switch (dsts & S3C_DSTS_EnumSpd_MASK) {
1797 case S3C_DSTS_EnumSpd_FS:
1798 case S3C_DSTS_EnumSpd_FS48:
1799 hsotg->gadget.speed = USB_SPEED_FULL;
1800 dev_info(hsotg->dev, "new device is full-speed\n");
1801
1802 ep0_mps = EP0_MPS_LIMIT;
1803 ep_mps = 64;
1804 break;
1805
1806 case S3C_DSTS_EnumSpd_HS:
1807 dev_info(hsotg->dev, "new device is high-speed\n");
1808 hsotg->gadget.speed = USB_SPEED_HIGH;
1809
1810 ep0_mps = EP0_MPS_LIMIT;
1811 ep_mps = 512;
1812 break;
1813
1814 case S3C_DSTS_EnumSpd_LS:
1815 hsotg->gadget.speed = USB_SPEED_LOW;
1816 dev_info(hsotg->dev, "new device is low-speed\n");
1817
1818 /* note, we don't actually support LS in this driver at the
1819 * moment, and the documentation seems to imply that it isn't
1820 * supported by the PHYs on some of the devices.
1821 */
1822 break;
1823 }
1824
1825 /* we should now know the maximum packet size for an
1826 * endpoint, so set the endpoints to a default value. */
1827
1828 if (ep0_mps) {
1829 int i;
1830 s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps);
1831 for (i = 1; i < S3C_HSOTG_EPS; i++)
1832 s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps);
1833 }
1834
1835 /* ensure after enumeration our EP0 is active */
1836
1837 s3c_hsotg_enqueue_setup(hsotg);
1838
1839 dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
1840 readl(hsotg->regs + S3C_DIEPCTL0),
1841 readl(hsotg->regs + S3C_DOEPCTL0));
1842}
1843
1844/**
1845 * kill_all_requests - remove all requests from the endpoint's queue
1846 * @hsotg: The device state.
1847 * @ep: The endpoint the requests may be on.
1848 * @result: The result code to use.
1849 * @force: Force removal of any current requests
1850 *
1851 * Go through the requests on the given endpoint and mark them
1852 * completed with the given result code.
1853 */
1854static void kill_all_requests(struct s3c_hsotg *hsotg,
1855 struct s3c_hsotg_ep *ep,
1856 int result, bool force)
1857{
1858 struct s3c_hsotg_req *req, *treq;
1859 unsigned long flags;
1860
1861 spin_lock_irqsave(&ep->lock, flags);
1862
1863 list_for_each_entry_safe(req, treq, &ep->queue, queue) {
1864 /* currently, we can't do much about an already
1865 * running request on an in endpoint */
1866
1867 if (ep->req == req && ep->dir_in && !force)
1868 continue;
1869
1870 s3c_hsotg_complete_request(hsotg, ep, req,
1871 result);
1872 }
1873
1874 spin_unlock_irqrestore(&ep->lock, flags);
1875}
1876
1877#define call_gadget(_hs, _entry) \
1878 if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
1879 (_hs)->driver && (_hs)->driver->_entry) \
1880 (_hs)->driver->_entry(&(_hs)->gadget);
1881
1882/**
1883 * s3c_hsotg_disconnect_irq - disconnect irq service
1884 * @hsotg: The device state.
1885 *
1886 * A disconnect IRQ has been received, meaning that the host has
1887 * lost contact with the bus. Remove all current transactions
1888 * and signal the gadget driver that this has happened.
1889*/
1890static void s3c_hsotg_disconnect_irq(struct s3c_hsotg *hsotg)
1891{
1892 unsigned ep;
1893
1894 for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
1895 kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true);
1896
1897 call_gadget(hsotg, disconnect);
1898}
1899
1900/**
1901 * s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler
1902 * @hsotg: The device state:
1903 * @periodic: True if this is a periodic FIFO interrupt
1904 */
1905static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
1906{
1907 struct s3c_hsotg_ep *ep;
1908 int epno, ret;
1909
1910 /* look through for any more data to transmit */
1911
1912 for (epno = 0; epno < S3C_HSOTG_EPS; epno++) {
1913 ep = &hsotg->eps[epno];
1914
1915 if (!ep->dir_in)
1916 continue;
1917
1918 if ((periodic && !ep->periodic) ||
1919 (!periodic && ep->periodic))
1920 continue;
1921
1922 ret = s3c_hsotg_trytx(hsotg, ep);
1923 if (ret < 0)
1924 break;
1925 }
1926}
1927
1928static struct s3c_hsotg *our_hsotg;
1929
1930/* IRQ flags which will trigger a retry around the IRQ loop */
1931#define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \
1932 S3C_GINTSTS_PTxFEmp | \
1933 S3C_GINTSTS_RxFLvl)
1934
1935/**
1936 * s3c_hsotg_irq - handle device interrupt
1937 * @irq: The IRQ number triggered
1938 * @pw: The pw value when registered the handler.
1939 */
1940static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
1941{
1942 struct s3c_hsotg *hsotg = pw;
1943 int retry_count = 8;
1944 u32 gintsts;
1945 u32 gintmsk;
1946
1947irq_retry:
1948 gintsts = readl(hsotg->regs + S3C_GINTSTS);
1949 gintmsk = readl(hsotg->regs + S3C_GINTMSK);
1950
1951 dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
1952 __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
1953
1954 gintsts &= gintmsk;
1955
1956 if (gintsts & S3C_GINTSTS_OTGInt) {
1957 u32 otgint = readl(hsotg->regs + S3C_GOTGINT);
1958
1959 dev_info(hsotg->dev, "OTGInt: %08x\n", otgint);
1960
1961 writel(otgint, hsotg->regs + S3C_GOTGINT);
1962 writel(S3C_GINTSTS_OTGInt, hsotg->regs + S3C_GINTSTS);
1963 }
1964
1965 if (gintsts & S3C_GINTSTS_DisconnInt) {
1966 dev_dbg(hsotg->dev, "%s: DisconnInt\n", __func__);
1967 writel(S3C_GINTSTS_DisconnInt, hsotg->regs + S3C_GINTSTS);
1968
1969 s3c_hsotg_disconnect_irq(hsotg);
1970 }
1971
1972 if (gintsts & S3C_GINTSTS_SessReqInt) {
1973 dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__);
1974 writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS);
1975 }
1976
1977 if (gintsts & S3C_GINTSTS_EnumDone) {
1978 s3c_hsotg_irq_enumdone(hsotg);
1979 writel(S3C_GINTSTS_EnumDone, hsotg->regs + S3C_GINTSTS);
1980 }
1981
1982 if (gintsts & S3C_GINTSTS_ConIDStsChng) {
1983 dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n",
1984 readl(hsotg->regs + S3C_DSTS),
1985 readl(hsotg->regs + S3C_GOTGCTL));
1986
1987 writel(S3C_GINTSTS_ConIDStsChng, hsotg->regs + S3C_GINTSTS);
1988 }
1989
1990 if (gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt)) {
1991 u32 daint = readl(hsotg->regs + S3C_DAINT);
1992 u32 daint_out = daint >> S3C_DAINT_OutEP_SHIFT;
1993 u32 daint_in = daint & ~(daint_out << S3C_DAINT_OutEP_SHIFT);
1994 int ep;
1995
1996 dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
1997
1998 for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) {
1999 if (daint_out & 1)
2000 s3c_hsotg_epint(hsotg, ep, 0);
2001 }
2002
2003 for (ep = 0; ep < 15 && daint_in; ep++, daint_in >>= 1) {
2004 if (daint_in & 1)
2005 s3c_hsotg_epint(hsotg, ep, 1);
2006 }
2007
2008 writel(daint, hsotg->regs + S3C_DAINT);
2009 writel(gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt),
2010 hsotg->regs + S3C_GINTSTS);
2011 }
2012
2013 if (gintsts & S3C_GINTSTS_USBRst) {
2014 dev_info(hsotg->dev, "%s: USBRst\n", __func__);
2015 dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
2016 readl(hsotg->regs + S3C_GNPTXSTS));
2017
2018 kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true);
2019
2020 /* it seems after a reset we can end up with a situation
2021 * where the TXFIFO still has data in it... try flushing
2022 * it to remove anything that may still be in it.
2023 */
2024
2025 if (1) {
2026 writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh,
2027 hsotg->regs + S3C_GRSTCTL);
2028
2029 dev_info(hsotg->dev, "GNPTXSTS=%08x\n",
2030 readl(hsotg->regs + S3C_GNPTXSTS));
2031 }
2032
2033 s3c_hsotg_enqueue_setup(hsotg);
2034
2035 writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS);
2036 }
2037
2038 /* check both FIFOs */
2039
2040 if (gintsts & S3C_GINTSTS_NPTxFEmp) {
2041 dev_dbg(hsotg->dev, "NPTxFEmp\n");
2042
2043 /* Disable the interrupt to stop it happening again
2044 * unless one of these endpoint routines decides that
2045 * it needs re-enabling */
2046
2047 s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
2048 s3c_hsotg_irq_fifoempty(hsotg, false);
2049
2050 writel(S3C_GINTSTS_NPTxFEmp, hsotg->regs + S3C_GINTSTS);
2051 }
2052
2053 if (gintsts & S3C_GINTSTS_PTxFEmp) {
2054 dev_dbg(hsotg->dev, "PTxFEmp\n");
2055
2056 /* See note in S3C_GINTSTS_NPTxFEmp */
2057
2058 s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
2059 s3c_hsotg_irq_fifoempty(hsotg, true);
2060
2061 writel(S3C_GINTSTS_PTxFEmp, hsotg->regs + S3C_GINTSTS);
2062 }
2063
2064 if (gintsts & S3C_GINTSTS_RxFLvl) {
2065 /* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
2066 * we need to retry s3c_hsotg_handle_rx if this is still
2067 * set. */
2068
2069 s3c_hsotg_handle_rx(hsotg);
2070 writel(S3C_GINTSTS_RxFLvl, hsotg->regs + S3C_GINTSTS);
2071 }
2072
2073 if (gintsts & S3C_GINTSTS_ModeMis) {
2074 dev_warn(hsotg->dev, "warning, mode mismatch triggered\n");
2075 writel(S3C_GINTSTS_ModeMis, hsotg->regs + S3C_GINTSTS);
2076 }
2077
2078 if (gintsts & S3C_GINTSTS_USBSusp) {
2079 dev_info(hsotg->dev, "S3C_GINTSTS_USBSusp\n");
2080 writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS);
2081
2082 call_gadget(hsotg, suspend);
2083 }
2084
2085 if (gintsts & S3C_GINTSTS_WkUpInt) {
2086 dev_info(hsotg->dev, "S3C_GINTSTS_WkUpIn\n");
2087 writel(S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTSTS);
2088
2089 call_gadget(hsotg, resume);
2090 }
2091
2092 if (gintsts & S3C_GINTSTS_ErlySusp) {
2093 dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n");
2094 writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS);
2095 }
2096
2097 /* these next two seem to crop-up occasionally causing the core
2098 * to shutdown the USB transfer, so try clearing them and logging
2099 * the occurence. */
2100
2101 if (gintsts & S3C_GINTSTS_GOUTNakEff) {
2102 dev_info(hsotg->dev, "GOUTNakEff triggered\n");
2103
2104 s3c_hsotg_dump(hsotg);
2105
2106 writel(S3C_DCTL_CGOUTNak, hsotg->regs + S3C_DCTL);
2107 writel(S3C_GINTSTS_GOUTNakEff, hsotg->regs + S3C_GINTSTS);
2108 }
2109
2110 if (gintsts & S3C_GINTSTS_GINNakEff) {
2111 dev_info(hsotg->dev, "GINNakEff triggered\n");
2112
2113 s3c_hsotg_dump(hsotg);
2114
2115 writel(S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL);
2116 writel(S3C_GINTSTS_GINNakEff, hsotg->regs + S3C_GINTSTS);
2117 }
2118
2119 /* if we've had fifo events, we should try and go around the
2120 * loop again to see if there's any point in returning yet. */
2121
2122 if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
2123 goto irq_retry;
2124
2125 return IRQ_HANDLED;
2126}
2127
2128/**
2129 * s3c_hsotg_ep_enable - enable the given endpoint
2130 * @ep: The USB endpint to configure
2131 * @desc: The USB endpoint descriptor to configure with.
2132 *
2133 * This is called from the USB gadget code's usb_ep_enable().
2134*/
2135static int s3c_hsotg_ep_enable(struct usb_ep *ep,
2136 const struct usb_endpoint_descriptor *desc)
2137{
2138 struct s3c_hsotg_ep *hs_ep = our_ep(ep);
2139 struct s3c_hsotg *hsotg = hs_ep->parent;
2140 unsigned long flags;
2141 int index = hs_ep->index;
2142 u32 epctrl_reg;
2143 u32 epctrl;
2144 u32 mps;
2145 int dir_in;
2146
2147 dev_dbg(hsotg->dev,
2148 "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
2149 __func__, ep->name, desc->bEndpointAddress, desc->bmAttributes,
2150 desc->wMaxPacketSize, desc->bInterval);
2151
2152 /* not to be called for EP0 */
2153 WARN_ON(index == 0);
2154
2155 dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
2156 if (dir_in != hs_ep->dir_in) {
2157 dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__);
2158 return -EINVAL;
2159 }
2160
2161 mps = le16_to_cpu(desc->wMaxPacketSize);
2162
2163 /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
2164
2165 epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
2166 epctrl = readl(hsotg->regs + epctrl_reg);
2167
2168 dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
2169 __func__, epctrl, epctrl_reg);
2170
2171 spin_lock_irqsave(&hs_ep->lock, flags);
2172
2173 epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK);
2174 epctrl |= S3C_DxEPCTL_MPS(mps);
2175
2176 /* mark the endpoint as active, otherwise the core may ignore
2177 * transactions entirely for this endpoint */
2178 epctrl |= S3C_DxEPCTL_USBActEp;
2179
2180 /* set the NAK status on the endpoint, otherwise we might try and
2181 * do something with data that we've yet got a request to process
2182 * since the RXFIFO will take data for an endpoint even if the
2183 * size register hasn't been set.
2184 */
2185
2186 epctrl |= S3C_DxEPCTL_SNAK;
2187
2188 /* update the endpoint state */
2189 hs_ep->ep.maxpacket = mps;
2190
2191 /* default, set to non-periodic */
2192 hs_ep->periodic = 0;
2193
2194 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
2195 case USB_ENDPOINT_XFER_ISOC:
2196 dev_err(hsotg->dev, "no current ISOC support\n");
2197 return -EINVAL;
2198
2199 case USB_ENDPOINT_XFER_BULK:
2200 epctrl |= S3C_DxEPCTL_EPType_Bulk;
2201 break;
2202
2203 case USB_ENDPOINT_XFER_INT:
2204 if (dir_in) {
2205 /* Allocate our TxFNum by simply using the index
2206 * of the endpoint for the moment. We could do
2207 * something better if the host indicates how
2208 * many FIFOs we are expecting to use. */
2209
2210 hs_ep->periodic = 1;
2211 epctrl |= S3C_DxEPCTL_TxFNum(index);
2212 }
2213
2214 epctrl |= S3C_DxEPCTL_EPType_Intterupt;
2215 break;
2216
2217 case USB_ENDPOINT_XFER_CONTROL:
2218 epctrl |= S3C_DxEPCTL_EPType_Control;
2219 break;
2220 }
2221
2222 /* for non control endpoints, set PID to D0 */
2223 if (index)
2224 epctrl |= S3C_DxEPCTL_SetD0PID;
2225
2226 dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
2227 __func__, epctrl);
2228
2229 writel(epctrl, hsotg->regs + epctrl_reg);
2230 dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
2231 __func__, readl(hsotg->regs + epctrl_reg));
2232
2233 /* enable the endpoint interrupt */
2234 s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
2235
2236 spin_unlock_irqrestore(&hs_ep->lock, flags);
2237 return 0;
2238}
2239
2240static int s3c_hsotg_ep_disable(struct usb_ep *ep)
2241{
2242 struct s3c_hsotg_ep *hs_ep = our_ep(ep);
2243 struct s3c_hsotg *hsotg = hs_ep->parent;
2244 int dir_in = hs_ep->dir_in;
2245 int index = hs_ep->index;
2246 unsigned long flags;
2247 u32 epctrl_reg;
2248 u32 ctrl;
2249
2250 dev_info(hsotg->dev, "%s(ep %p)\n", __func__, ep);
2251
2252 if (ep == &hsotg->eps[0].ep) {
2253 dev_err(hsotg->dev, "%s: called for ep0\n", __func__);
2254 return -EINVAL;
2255 }
2256
2257 epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
2258
2259 /* terminate all requests with shutdown */
2260 kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
2261
2262 spin_lock_irqsave(&hs_ep->lock, flags);
2263
2264 ctrl = readl(hsotg->regs + epctrl_reg);
2265 ctrl &= ~S3C_DxEPCTL_EPEna;
2266 ctrl &= ~S3C_DxEPCTL_USBActEp;
2267 ctrl |= S3C_DxEPCTL_SNAK;
2268
2269 dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
2270 writel(ctrl, hsotg->regs + epctrl_reg);
2271
2272 /* disable endpoint interrupts */
2273 s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
2274
2275 spin_unlock_irqrestore(&hs_ep->lock, flags);
2276 return 0;
2277}
2278
2279/**
2280 * on_list - check request is on the given endpoint
2281 * @ep: The endpoint to check.
2282 * @test: The request to test if it is on the endpoint.
2283*/
2284static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test)
2285{
2286 struct s3c_hsotg_req *req, *treq;
2287
2288 list_for_each_entry_safe(req, treq, &ep->queue, queue) {
2289 if (req == test)
2290 return true;
2291 }
2292
2293 return false;
2294}
2295
2296static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
2297{
2298 struct s3c_hsotg_req *hs_req = our_req(req);
2299 struct s3c_hsotg_ep *hs_ep = our_ep(ep);
2300 struct s3c_hsotg *hs = hs_ep->parent;
2301 unsigned long flags;
2302
2303 dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
2304
2305 if (hs_req == hs_ep->req) {
2306 dev_dbg(hs->dev, "%s: already in progress\n", __func__);
2307 return -EINPROGRESS;
2308 }
2309
2310 spin_lock_irqsave(&hs_ep->lock, flags);
2311
2312 if (!on_list(hs_ep, hs_req)) {
2313 spin_unlock_irqrestore(&hs_ep->lock, flags);
2314 return -EINVAL;
2315 }
2316
2317 s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
2318 spin_unlock_irqrestore(&hs_ep->lock, flags);
2319
2320 return 0;
2321}
2322
2323static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
2324{
2325 struct s3c_hsotg_ep *hs_ep = our_ep(ep);
2326 struct s3c_hsotg *hs = hs_ep->parent;
2327 int index = hs_ep->index;
2328 unsigned long irqflags;
2329 u32 epreg;
2330 u32 epctl;
2331
2332 dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
2333
2334 spin_lock_irqsave(&hs_ep->lock, irqflags);
2335
2336 /* write both IN and OUT control registers */
2337
2338 epreg = S3C_DIEPCTL(index);
2339 epctl = readl(hs->regs + epreg);
2340
2341 if (value)
2342 epctl |= S3C_DxEPCTL_Stall;
2343 else
2344 epctl &= ~S3C_DxEPCTL_Stall;
2345
2346 writel(epctl, hs->regs + epreg);
2347
2348 epreg = S3C_DOEPCTL(index);
2349 epctl = readl(hs->regs + epreg);
2350
2351 if (value)
2352 epctl |= S3C_DxEPCTL_Stall;
2353 else
2354 epctl &= ~S3C_DxEPCTL_Stall;
2355
2356 writel(epctl, hs->regs + epreg);
2357
2358 spin_unlock_irqrestore(&hs_ep->lock, irqflags);
2359
2360 return 0;
2361}
2362
2363static struct usb_ep_ops s3c_hsotg_ep_ops = {
2364 .enable = s3c_hsotg_ep_enable,
2365 .disable = s3c_hsotg_ep_disable,
2366 .alloc_request = s3c_hsotg_ep_alloc_request,
2367 .free_request = s3c_hsotg_ep_free_request,
2368 .queue = s3c_hsotg_ep_queue,
2369 .dequeue = s3c_hsotg_ep_dequeue,
2370 .set_halt = s3c_hsotg_ep_sethalt,
2371 /* note, don't belive we have any call for the fifo routines */
2372};
2373
2374/**
2375 * s3c_hsotg_corereset - issue softreset to the core
2376 * @hsotg: The device state
2377 *
2378 * Issue a soft reset to the core, and await the core finishing it.
2379*/
2380static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
2381{
2382 int timeout;
2383 u32 grstctl;
2384
2385 dev_dbg(hsotg->dev, "resetting core\n");
2386
2387 /* issue soft reset */
2388 writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL);
2389
2390 timeout = 1000;
2391 do {
2392 grstctl = readl(hsotg->regs + S3C_GRSTCTL);
2393 } while (!(grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0);
2394
2395 if (!grstctl & S3C_GRSTCTL_CSftRst) {
2396 dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
2397 return -EINVAL;
2398 }
2399
2400 timeout = 1000;
2401
2402 while (1) {
2403 u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL);
2404
2405 if (timeout-- < 0) {
2406 dev_info(hsotg->dev,
2407 "%s: reset failed, GRSTCTL=%08x\n",
2408 __func__, grstctl);
2409 return -ETIMEDOUT;
2410 }
2411
2412 if (grstctl & S3C_GRSTCTL_CSftRst)
2413 continue;
2414
2415 if (!(grstctl & S3C_GRSTCTL_AHBIdle))
2416 continue;
2417
2418 break; /* reset done */
2419 }
2420
2421 dev_dbg(hsotg->dev, "reset successful\n");
2422 return 0;
2423}
2424
2425int usb_gadget_register_driver(struct usb_gadget_driver *driver)
2426{
2427 struct s3c_hsotg *hsotg = our_hsotg;
2428 int ret;
2429
2430 if (!hsotg) {
2431 printk(KERN_ERR "%s: called with no device\n", __func__);
2432 return -ENODEV;
2433 }
2434
2435 if (!driver) {
2436 dev_err(hsotg->dev, "%s: no driver\n", __func__);
2437 return -EINVAL;
2438 }
2439
2440 if (driver->speed != USB_SPEED_HIGH &&
2441 driver->speed != USB_SPEED_FULL) {
2442 dev_err(hsotg->dev, "%s: bad speed\n", __func__);
2443 }
2444
2445 if (!driver->bind || !driver->setup) {
2446 dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
2447 return -EINVAL;
2448 }
2449
2450 WARN_ON(hsotg->driver);
2451
2452 driver->driver.bus = NULL;
2453 hsotg->driver = driver;
2454 hsotg->gadget.dev.driver = &driver->driver;
2455 hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
2456 hsotg->gadget.speed = USB_SPEED_UNKNOWN;
2457
2458 ret = device_add(&hsotg->gadget.dev);
2459 if (ret) {
2460 dev_err(hsotg->dev, "failed to register gadget device\n");
2461 goto err;
2462 }
2463
2464 ret = driver->bind(&hsotg->gadget);
2465 if (ret) {
2466 dev_err(hsotg->dev, "failed bind %s\n", driver->driver.name);
2467
2468 hsotg->gadget.dev.driver = NULL;
2469 hsotg->driver = NULL;
2470 goto err;
2471 }
2472
2473 /* we must now enable ep0 ready for host detection and then
2474 * set configuration. */
2475
2476 s3c_hsotg_corereset(hsotg);
2477
2478 /* set the PLL on, remove the HNP/SRP and set the PHY */
2479 writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) |
2480 (0x5 << 10), hsotg->regs + S3C_GUSBCFG);
2481
2482 /* looks like soft-reset changes state of FIFOs */
2483 s3c_hsotg_init_fifo(hsotg);
2484
2485 __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
2486
2487 writel(1 << 18 | S3C_DCFG_DevSpd_HS, hsotg->regs + S3C_DCFG);
2488
2489 writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt |
2490 S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst |
2491 S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt |
2492 S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt |
2493 S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff |
2494 S3C_GINTSTS_ErlySusp,
2495 hsotg->regs + S3C_GINTMSK);
2496
2497 if (using_dma(hsotg))
2498 writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn |
2499 S3C_GAHBCFG_HBstLen_Incr4,
2500 hsotg->regs + S3C_GAHBCFG);
2501 else
2502 writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG);
2503
2504 /* Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
2505 * up being flooded with interrupts if the host is polling the
2506 * endpoint to try and read data. */
2507
2508 writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
2509 S3C_DIEPMSK_INTknEPMisMsk |
2510 S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
2511 hsotg->regs + S3C_DIEPMSK);
2512
2513 /* don't need XferCompl, we get that from RXFIFO in slave mode. In
2514 * DMA mode we may need this. */
2515 writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
2516 S3C_DOEPMSK_EPDisbldMsk |
2517 using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
2518 S3C_DIEPMSK_TimeOUTMsk) : 0,
2519 hsotg->regs + S3C_DOEPMSK);
2520
2521 writel(0, hsotg->regs + S3C_DAINTMSK);
2522
2523 dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
2524 readl(hsotg->regs + S3C_DIEPCTL0),
2525 readl(hsotg->regs + S3C_DOEPCTL0));
2526
2527 /* enable in and out endpoint interrupts */
2528 s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
2529
2530 /* Enable the RXFIFO when in slave mode, as this is how we collect
2531 * the data. In DMA mode, we get events from the FIFO but also
2532 * things we cannot process, so do not use it. */
2533 if (!using_dma(hsotg))
2534 s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl);
2535
2536 /* Enable interrupts for EP0 in and out */
2537 s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1);
2538 s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1);
2539
2540 __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
2541 udelay(10); /* see openiboot */
2542 __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
2543
2544 dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
2545
2546 /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
2547 writing to the EPCTL register.. */
2548
2549 /* set to read 1 8byte packet */
2550 writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
2551 S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0);
2552
2553 writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
2554 S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna |
2555 S3C_DxEPCTL_USBActEp,
2556 hsotg->regs + S3C_DOEPCTL0);
2557
2558 /* enable, but don't activate EP0in */
2559 writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
2560 S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0);
2561
2562 s3c_hsotg_enqueue_setup(hsotg);
2563
2564 dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
2565 readl(hsotg->regs + S3C_DIEPCTL0),
2566 readl(hsotg->regs + S3C_DOEPCTL0));
2567
2568 /* clear global NAKs */
2569 writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
2570 hsotg->regs + S3C_DCTL);
2571
2572 /* remove the soft-disconnect and let's go */
2573 __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
2574
2575 /* report to the user, and return */
2576
2577 dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
2578 return 0;
2579
2580err:
2581 hsotg->driver = NULL;
2582 hsotg->gadget.dev.driver = NULL;
2583 return ret;
2584}
2585
2586int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
2587{
2588 struct s3c_hsotg *hsotg = our_hsotg;
2589 int ep;
2590
2591 if (!hsotg)
2592 return -ENODEV;
2593
2594 if (!driver || driver != hsotg->driver || !driver->unbind)
2595 return -EINVAL;
2596
2597 /* all endpoints should be shutdown */
2598 for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
2599 s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
2600
2601 call_gadget(hsotg, disconnect);
2602
2603 driver->unbind(&hsotg->gadget);
2604 hsotg->driver = NULL;
2605 hsotg->gadget.speed = USB_SPEED_UNKNOWN;
2606
2607 device_del(&hsotg->gadget.dev);
2608
2609 dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
2610 driver->driver.name);
2611
2612 return 0;
2613}
2614EXPORT_SYMBOL(usb_gadget_unregister_driver);
2615
2616static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
2617{
2618 return s3c_hsotg_read_frameno(to_hsotg(gadget));
2619}
2620
2621static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
2622 .get_frame = s3c_hsotg_gadget_getframe,
2623};
2624
2625/**
2626 * s3c_hsotg_initep - initialise a single endpoint
2627 * @hsotg: The device state.
2628 * @hs_ep: The endpoint to be initialised.
2629 * @epnum: The endpoint number
2630 *
2631 * Initialise the given endpoint (as part of the probe and device state
2632 * creation) to give to the gadget driver. Setup the endpoint name, any
2633 * direction information and other state that may be required.
2634 */
2635static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
2636 struct s3c_hsotg_ep *hs_ep,
2637 int epnum)
2638{
2639 u32 ptxfifo;
2640 char *dir;
2641
2642 if (epnum == 0)
2643 dir = "";
2644 else if ((epnum % 2) == 0) {
2645 dir = "out";
2646 } else {
2647 dir = "in";
2648 hs_ep->dir_in = 1;
2649 }
2650
2651 hs_ep->index = epnum;
2652
2653 snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir);
2654
2655 INIT_LIST_HEAD(&hs_ep->queue);
2656 INIT_LIST_HEAD(&hs_ep->ep.ep_list);
2657
2658 spin_lock_init(&hs_ep->lock);
2659
2660 /* add to the list of endpoints known by the gadget driver */
2661 if (epnum)
2662 list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
2663
2664 hs_ep->parent = hsotg;
2665 hs_ep->ep.name = hs_ep->name;
2666 hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
2667 hs_ep->ep.ops = &s3c_hsotg_ep_ops;
2668
2669 /* Read the FIFO size for the Periodic TX FIFO, even if we're
2670 * an OUT endpoint, we may as well do this if in future the
2671 * code is changed to make each endpoint's direction changeable.
2672 */
2673
2674 ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
2675 hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo);
2676
2677 /* if we're using dma, we need to set the next-endpoint pointer
2678 * to be something valid.
2679 */
2680
2681 if (using_dma(hsotg)) {
2682 u32 next = S3C_DxEPCTL_NextEp((epnum + 1) % 15);
2683 writel(next, hsotg->regs + S3C_DIEPCTL(epnum));
2684 writel(next, hsotg->regs + S3C_DOEPCTL(epnum));
2685 }
2686}
2687
2688/**
2689 * s3c_hsotg_otgreset - reset the OtG phy block
2690 * @hsotg: The host state.
2691 *
2692 * Power up the phy, set the basic configuration and start the PHY.
2693 */
2694static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
2695{
2696 u32 osc;
2697
2698 writel(0, S3C_PHYPWR);
2699 mdelay(1);
2700
2701 osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
2702
2703 writel(osc | 0x10, S3C_PHYCLK);
2704
2705 /* issue a full set of resets to the otg and core */
2706
2707 writel(S3C_RSTCON_PHY, S3C_RSTCON);
2708 udelay(20); /* at-least 10uS */
2709 writel(0, S3C_RSTCON);
2710}
2711
2712
2713static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
2714{
2715 /* unmask subset of endpoint interrupts */
2716
2717 writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
2718 S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
2719 hsotg->regs + S3C_DIEPMSK);
2720
2721 writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
2722 S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk,
2723 hsotg->regs + S3C_DOEPMSK);
2724
2725 writel(0, hsotg->regs + S3C_DAINTMSK);
2726
2727 if (0) {
2728 /* post global nak until we're ready */
2729 writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,
2730 hsotg->regs + S3C_DCTL);
2731 }
2732
2733 /* setup fifos */
2734
2735 dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
2736 readl(hsotg->regs + S3C_GRXFSIZ),
2737 readl(hsotg->regs + S3C_GNPTXFSIZ));
2738
2739 s3c_hsotg_init_fifo(hsotg);
2740
2741 /* set the PLL on, remove the HNP/SRP and set the PHY */
2742 writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10),
2743 hsotg->regs + S3C_GUSBCFG);
2744
2745 writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0,
2746 hsotg->regs + S3C_GAHBCFG);
2747}
2748
2749static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
2750{
2751 struct device *dev = hsotg->dev;
2752 void __iomem *regs = hsotg->regs;
2753 u32 val;
2754 int idx;
2755
2756 dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
2757 readl(regs + S3C_DCFG), readl(regs + S3C_DCTL),
2758 readl(regs + S3C_DIEPMSK));
2759
2760 dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n",
2761 readl(regs + S3C_GAHBCFG), readl(regs + 0x44));
2762
2763 dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
2764 readl(regs + S3C_GRXFSIZ), readl(regs + S3C_GNPTXFSIZ));
2765
2766 /* show periodic fifo settings */
2767
2768 for (idx = 1; idx <= 15; idx++) {
2769 val = readl(regs + S3C_DPTXFSIZn(idx));
2770 dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
2771 val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
2772 val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
2773 }
2774
2775 for (idx = 0; idx < 15; idx++) {
2776 dev_info(dev,
2777 "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
2778 readl(regs + S3C_DIEPCTL(idx)),
2779 readl(regs + S3C_DIEPTSIZ(idx)),
2780 readl(regs + S3C_DIEPDMA(idx)));
2781
2782 val = readl(regs + S3C_DOEPCTL(idx));
2783 dev_info(dev,
2784 "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
2785 idx, readl(regs + S3C_DOEPCTL(idx)),
2786 readl(regs + S3C_DOEPTSIZ(idx)),
2787 readl(regs + S3C_DOEPDMA(idx)));
2788
2789 }
2790
2791 dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
2792 readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
2793}
2794
2795
2796/**
2797 * state_show - debugfs: show overall driver and device state.
2798 * @seq: The seq file to write to.
2799 * @v: Unused parameter.
2800 *
2801 * This debugfs entry shows the overall state of the hardware and
2802 * some general information about each of the endpoints available
2803 * to the system.
2804 */
2805static int state_show(struct seq_file *seq, void *v)
2806{
2807 struct s3c_hsotg *hsotg = seq->private;
2808 void __iomem *regs = hsotg->regs;
2809 int idx;
2810
2811 seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
2812 readl(regs + S3C_DCFG),
2813 readl(regs + S3C_DCTL),
2814 readl(regs + S3C_DSTS));
2815
2816 seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
2817 readl(regs + S3C_DIEPMSK), readl(regs + S3C_DOEPMSK));
2818
2819 seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
2820 readl(regs + S3C_GINTMSK),
2821 readl(regs + S3C_GINTSTS));
2822
2823 seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
2824 readl(regs + S3C_DAINTMSK),
2825 readl(regs + S3C_DAINT));
2826
2827 seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
2828 readl(regs + S3C_GNPTXSTS),
2829 readl(regs + S3C_GRXSTSR));
2830
2831 seq_printf(seq, "\nEndpoint status:\n");
2832
2833 for (idx = 0; idx < 15; idx++) {
2834 u32 in, out;
2835
2836 in = readl(regs + S3C_DIEPCTL(idx));
2837 out = readl(regs + S3C_DOEPCTL(idx));
2838
2839 seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
2840 idx, in, out);
2841
2842 in = readl(regs + S3C_DIEPTSIZ(idx));
2843 out = readl(regs + S3C_DOEPTSIZ(idx));
2844
2845 seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
2846 in, out);
2847
2848 seq_printf(seq, "\n");
2849 }
2850
2851 return 0;
2852}
2853
2854static int state_open(struct inode *inode, struct file *file)
2855{
2856 return single_open(file, state_show, inode->i_private);
2857}
2858
2859static const struct file_operations state_fops = {
2860 .owner = THIS_MODULE,
2861 .open = state_open,
2862 .read = seq_read,
2863 .llseek = seq_lseek,
2864 .release = single_release,
2865};
2866
2867/**
2868 * fifo_show - debugfs: show the fifo information
2869 * @seq: The seq_file to write data to.
2870 * @v: Unused parameter.
2871 *
2872 * Show the FIFO information for the overall fifo and all the
2873 * periodic transmission FIFOs.
2874*/
2875static int fifo_show(struct seq_file *seq, void *v)
2876{
2877 struct s3c_hsotg *hsotg = seq->private;
2878 void __iomem *regs = hsotg->regs;
2879 u32 val;
2880 int idx;
2881
2882 seq_printf(seq, "Non-periodic FIFOs:\n");
2883 seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + S3C_GRXFSIZ));
2884
2885 val = readl(regs + S3C_GNPTXFSIZ);
2886 seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
2887 val >> S3C_GNPTXFSIZ_NPTxFDep_SHIFT,
2888 val & S3C_GNPTXFSIZ_NPTxFStAddr_MASK);
2889
2890 seq_printf(seq, "\nPeriodic TXFIFOs:\n");
2891
2892 for (idx = 1; idx <= 15; idx++) {
2893 val = readl(regs + S3C_DPTXFSIZn(idx));
2894
2895 seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
2896 val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
2897 val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
2898 }
2899
2900 return 0;
2901}
2902
2903static int fifo_open(struct inode *inode, struct file *file)
2904{
2905 return single_open(file, fifo_show, inode->i_private);
2906}
2907
2908static const struct file_operations fifo_fops = {
2909 .owner = THIS_MODULE,
2910 .open = fifo_open,
2911 .read = seq_read,
2912 .llseek = seq_lseek,
2913 .release = single_release,
2914};
2915
2916
2917static const char *decode_direction(int is_in)
2918{
2919 return is_in ? "in" : "out";
2920}
2921
2922/**
2923 * ep_show - debugfs: show the state of an endpoint.
2924 * @seq: The seq_file to write data to.
2925 * @v: Unused parameter.
2926 *
2927 * This debugfs entry shows the state of the given endpoint (one is
2928 * registered for each available).
2929*/
2930static int ep_show(struct seq_file *seq, void *v)
2931{
2932 struct s3c_hsotg_ep *ep = seq->private;
2933 struct s3c_hsotg *hsotg = ep->parent;
2934 struct s3c_hsotg_req *req;
2935 void __iomem *regs = hsotg->regs;
2936 int index = ep->index;
2937 int show_limit = 15;
2938 unsigned long flags;
2939
2940 seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n",
2941 ep->index, ep->ep.name, decode_direction(ep->dir_in));
2942
2943 /* first show the register state */
2944
2945 seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
2946 readl(regs + S3C_DIEPCTL(index)),
2947 readl(regs + S3C_DOEPCTL(index)));
2948
2949 seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
2950 readl(regs + S3C_DIEPDMA(index)),
2951 readl(regs + S3C_DOEPDMA(index)));
2952
2953 seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
2954 readl(regs + S3C_DIEPINT(index)),
2955 readl(regs + S3C_DOEPINT(index)));
2956
2957 seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
2958 readl(regs + S3C_DIEPTSIZ(index)),
2959 readl(regs + S3C_DOEPTSIZ(index)));
2960
2961 seq_printf(seq, "\n");
2962 seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
2963 seq_printf(seq, "total_data=%ld\n", ep->total_data);
2964
2965 seq_printf(seq, "request list (%p,%p):\n",
2966 ep->queue.next, ep->queue.prev);
2967
2968 spin_lock_irqsave(&ep->lock, flags);
2969
2970 list_for_each_entry(req, &ep->queue, queue) {
2971 if (--show_limit < 0) {
2972 seq_printf(seq, "not showing more requests...\n");
2973 break;
2974 }
2975
2976 seq_printf(seq, "%c req %p: %d bytes @%p, ",
2977 req == ep->req ? '*' : ' ',
2978 req, req->req.length, req->req.buf);
2979 seq_printf(seq, "%d done, res %d\n",
2980 req->req.actual, req->req.status);
2981 }
2982
2983 spin_unlock_irqrestore(&ep->lock, flags);
2984
2985 return 0;
2986}
2987
2988static int ep_open(struct inode *inode, struct file *file)
2989{
2990 return single_open(file, ep_show, inode->i_private);
2991}
2992
2993static const struct file_operations ep_fops = {
2994 .owner = THIS_MODULE,
2995 .open = ep_open,
2996 .read = seq_read,
2997 .llseek = seq_lseek,
2998 .release = single_release,
2999};
3000
3001/**
3002 * s3c_hsotg_create_debug - create debugfs directory and files
3003 * @hsotg: The driver state
3004 *
3005 * Create the debugfs files to allow the user to get information
3006 * about the state of the system. The directory name is created
3007 * with the same name as the device itself, in case we end up
3008 * with multiple blocks in future systems.
3009*/
3010static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
3011{
3012 struct dentry *root;
3013 unsigned epidx;
3014
3015 root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
3016 hsotg->debug_root = root;
3017 if (IS_ERR(root)) {
3018 dev_err(hsotg->dev, "cannot create debug root\n");
3019 return;
3020 }
3021
3022 /* create general state file */
3023
3024 hsotg->debug_file = debugfs_create_file("state", 0444, root,
3025 hsotg, &state_fops);
3026
3027 if (IS_ERR(hsotg->debug_file))
3028 dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
3029
3030 hsotg->debug_fifo = debugfs_create_file("fifo", 0444, root,
3031 hsotg, &fifo_fops);
3032
3033 if (IS_ERR(hsotg->debug_fifo))
3034 dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
3035
3036 /* create one file for each endpoint */
3037
3038 for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
3039 struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
3040
3041 ep->debugfs = debugfs_create_file(ep->name, 0444,
3042 root, ep, &ep_fops);
3043
3044 if (IS_ERR(ep->debugfs))
3045 dev_err(hsotg->dev, "failed to create %s debug file\n",
3046 ep->name);
3047 }
3048}
3049
3050/**
3051 * s3c_hsotg_delete_debug - cleanup debugfs entries
3052 * @hsotg: The driver state
3053 *
3054 * Cleanup (remove) the debugfs files for use on module exit.
3055*/
3056static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
3057{
3058 unsigned epidx;
3059
3060 for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
3061 struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
3062 debugfs_remove(ep->debugfs);
3063 }
3064
3065 debugfs_remove(hsotg->debug_file);
3066 debugfs_remove(hsotg->debug_fifo);
3067 debugfs_remove(hsotg->debug_root);
3068}
3069
3070/**
3071 * s3c_hsotg_gate - set the hardware gate for the block
3072 * @pdev: The device we bound to
3073 * @on: On or off.
3074 *
3075 * Set the hardware gate setting into the block. If we end up on
3076 * something other than an S3C64XX, then we might need to change this
3077 * to using a platform data callback, or some other mechanism.
3078 */
3079static void s3c_hsotg_gate(struct platform_device *pdev, bool on)
3080{
3081 unsigned long flags;
3082 u32 others;
3083
3084 local_irq_save(flags);
3085
3086 others = __raw_readl(S3C64XX_OTHERS);
3087 if (on)
3088 others |= S3C64XX_OTHERS_USBMASK;
3089 else
3090 others &= ~S3C64XX_OTHERS_USBMASK;
3091 __raw_writel(others, S3C64XX_OTHERS);
3092
3093 local_irq_restore(flags);
3094}
3095
3096struct s3c_hsotg_plat s3c_hsotg_default_pdata;
3097
3098static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
3099{
3100 struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
3101 struct device *dev = &pdev->dev;
3102 struct s3c_hsotg *hsotg;
3103 struct resource *res;
3104 int epnum;
3105 int ret;
3106
3107 if (!plat)
3108 plat = &s3c_hsotg_default_pdata;
3109
3110 hsotg = kzalloc(sizeof(struct s3c_hsotg) +
3111 sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS,
3112 GFP_KERNEL);
3113 if (!hsotg) {
3114 dev_err(dev, "cannot get memory\n");
3115 return -ENOMEM;
3116 }
3117
3118 hsotg->dev = dev;
3119 hsotg->plat = plat;
3120
3121 platform_set_drvdata(pdev, hsotg);
3122
3123 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
3124 if (!res) {
3125 dev_err(dev, "cannot find register resource 0\n");
3126 ret = -EINVAL;
3127 goto err_mem;
3128 }
3129
3130 hsotg->regs_res = request_mem_region(res->start, resource_size(res),
3131 dev_name(dev));
3132 if (!hsotg->regs_res) {
3133 dev_err(dev, "cannot reserve registers\n");
3134 ret = -ENOENT;
3135 goto err_mem;
3136 }
3137
3138 hsotg->regs = ioremap(res->start, resource_size(res));
3139 if (!hsotg->regs) {
3140 dev_err(dev, "cannot map registers\n");
3141 ret = -ENXIO;
3142 goto err_regs_res;
3143 }
3144
3145 ret = platform_get_irq(pdev, 0);
3146 if (ret < 0) {
3147 dev_err(dev, "cannot find IRQ\n");
3148 goto err_regs;
3149 }
3150
3151 hsotg->irq = ret;
3152
3153 ret = request_irq(ret, s3c_hsotg_irq, 0, dev_name(dev), hsotg);
3154 if (ret < 0) {
3155 dev_err(dev, "cannot claim IRQ\n");
3156 goto err_regs;
3157 }
3158
3159 dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
3160
3161 device_initialize(&hsotg->gadget.dev);
3162
3163 dev_set_name(&hsotg->gadget.dev, "gadget");
3164
3165 hsotg->gadget.is_dualspeed = 1;
3166 hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
3167 hsotg->gadget.name = dev_name(dev);
3168
3169 hsotg->gadget.dev.parent = dev;
3170 hsotg->gadget.dev.dma_mask = dev->dma_mask;
3171
3172 /* setup endpoint information */
3173
3174 INIT_LIST_HEAD(&hsotg->gadget.ep_list);
3175 hsotg->gadget.ep0 = &hsotg->eps[0].ep;
3176
3177 /* allocate EP0 request */
3178
3179 hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps[0].ep,
3180 GFP_KERNEL);
3181 if (!hsotg->ctrl_req) {
3182 dev_err(dev, "failed to allocate ctrl req\n");
3183 goto err_regs;
3184 }
3185
3186 /* reset the system */
3187
3188 s3c_hsotg_gate(pdev, true);
3189
3190 s3c_hsotg_otgreset(hsotg);
3191 s3c_hsotg_corereset(hsotg);
3192 s3c_hsotg_init(hsotg);
3193
3194 /* initialise the endpoints now the core has been initialised */
3195 for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++)
3196 s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
3197
3198 s3c_hsotg_create_debug(hsotg);
3199
3200 s3c_hsotg_dump(hsotg);
3201
3202 our_hsotg = hsotg;
3203 return 0;
3204
3205err_regs:
3206 iounmap(hsotg->regs);
3207
3208err_regs_res:
3209 release_resource(hsotg->regs_res);
3210 kfree(hsotg->regs_res);
3211
3212err_mem:
3213 kfree(hsotg);
3214 return ret;
3215}
3216
3217static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
3218{
3219 struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
3220
3221 s3c_hsotg_delete_debug(hsotg);
3222
3223 usb_gadget_unregister_driver(hsotg->driver);
3224
3225 free_irq(hsotg->irq, hsotg);
3226 iounmap(hsotg->regs);
3227
3228 release_resource(hsotg->regs_res);
3229 kfree(hsotg->regs_res);
3230
3231 s3c_hsotg_gate(pdev, false);
3232
3233 kfree(hsotg);
3234 return 0;
3235}
3236
3237#if 1
3238#define s3c_hsotg_suspend NULL
3239#define s3c_hsotg_resume NULL
3240#endif
3241
3242static struct platform_driver s3c_hsotg_driver = {
3243 .driver = {
3244 .name = "s3c-hsotg",
3245 .owner = THIS_MODULE,
3246 },
3247 .probe = s3c_hsotg_probe,
3248 .remove = __devexit_p(s3c_hsotg_remove),
3249 .suspend = s3c_hsotg_suspend,
3250 .resume = s3c_hsotg_resume,
3251};
3252
3253static int __init s3c_hsotg_modinit(void)
3254{
3255 return platform_driver_register(&s3c_hsotg_driver);
3256}
3257
3258static void __exit s3c_hsotg_modexit(void)
3259{
3260 platform_driver_unregister(&s3c_hsotg_driver);
3261}
3262
3263module_init(s3c_hsotg_modinit);
3264module_exit(s3c_hsotg_modexit);
3265
3266MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device");
3267MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
3268MODULE_LICENSE("GPL");
3269MODULE_ALIAS("platform:s3c-hsotg");
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-01 19:53:23 -0500