sbp2: remove manipulation of inquiry response

This code became ineffective a few Linux releases ago and is not
required anyway.

Note from Christoph Hellwig: scsi_cmnd.request_buffer is always a
scatterlist these days.  Checking random bites into it and then
mangling the data in sbp2_check_sbp2_response will cause really bad
memory corruption when you're not lucky enough to have the check not
trigger by luck.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>

2 files changed, 2 insertions, 37 deletions

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index c30e03a0e63b..11c353a4653b 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -2112,33 +2112,6 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense
 }
 
 /*
- * This function is called after a command is completed, in order to do any necessary SBP-2
- * response data translations for the SCSI stack
- */
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
-                                     struct scsi_cmnd *SCpnt)
-{
-        u8 *scsi_buf = SCpnt->request_buffer;
-
-        SBP2_DEBUG_ENTER();
-
-        if (SCpnt->cmnd[0] == INQUIRY && (SCpnt->cmnd[1] & 3) == 0) {
-                /*
-                 * Make sure data length is ok. Minimum length is 36 bytes
-                 */
-                if (scsi_buf[4] == 0) {
-                        scsi_buf[4] = 36 - 5;
-                }
-
-                /*
-                 * Fix ansi revision and response data format
-                 */
-                scsi_buf[2] |= 2;
-                scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2;
-        }
-}
-
-/*
  * This function deals with status writes from the SBP-2 device
  */
 static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
@@ -2477,13 +2450,6 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
         }
 
         /*
-         * Take care of any sbp2 response data mucking here (RBC stuff, etc.)
-         */
-        if (SCpnt->result == DID_OK << 16) {
-                sbp2_check_sbp2_response(scsi_id, SCpnt);
-        }
-
-        /*
          * If a bus reset is in progress and there was an error, complete
          * the command as busy so that it will get retried.
          */
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index f4ccc9d0fba4..2f53b16afc51 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -395,9 +395,8 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
 static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
                              struct scsi_cmnd *SCpnt,
                              void (*done)(struct scsi_cmnd *));
-static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data);
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
-                                     struct scsi_cmnd *SCpnt);
+static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status,
+                                              unchar *sense_data);
 static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
                                       struct unit_directory *ud);
 static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);