Merge branch 'linus' into core/percpu

Conflicts:
	kernel/irq/handle.c

123 files changed, 5073 insertions, 774 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 503a908afc80..0bcf26464670 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -112,11 +112,11 @@ config ATA_PIIX
           If unsure, say N.
 
 config SATA_MV
-        tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
-        depends on EXPERIMENTAL
+        tristate "Marvell SATA support"
         help
           This option enables support for the Marvell Serial ATA family.
-          Currently supports 88SX[56]0[48][01] chips.
+          Currently supports 88SX[56]0[48][01] PCI(-X) chips,
+          as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 
           If unsure, say N.
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 96039671e3b9..77bba4c083cb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2548,6 +2548,32 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
         }
 }
 
+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
+{
+        static const struct dmi_system_id broken_systems[] = {
+                {
+                        .ident = "HP Compaq nx6310",
+                        .matches = {
+                                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+                                DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
+                        },
+                        /* PCI slot number of the controller */
+                        .driver_data = (void *)0x1FUL,
+                },
+
+                { }     /* terminate list */
+        };
+        const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+        if (dmi) {
+                unsigned long slot = (unsigned long)dmi->driver_data;
+                /* apply the quirk only to on-board controllers */
+                return slot == PCI_SLOT(pdev->devfn);
+        }
+
+        return false;
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
         static int printed_version;
@@ -2647,6 +2673,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                 }
         }
 
+        if (ahci_broken_system_poweroff(pdev)) {
+                pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
+                dev_info(&pdev->dev,
+                        "quirky BIOS, skipping spindown on poweroff\n");
+        }
+
         /* CAP.NP sometimes indicate the index of the last enabled
          * port, at other times, that of the last possible port, so
          * determining the maximum port number requires looking at
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 887d8f46a287..54961c0b2c73 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1387,6 +1387,32 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host)
         }
 }
 
+static bool piix_broken_system_poweroff(struct pci_dev *pdev)
+{
+        static const struct dmi_system_id broken_systems[] = {
+                {
+                        .ident = "HP Compaq 2510p",
+                        .matches = {
+                                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+                                DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"),
+                        },
+                        /* PCI slot number of the controller */
+                        .driver_data = (void *)0x1FUL,
+                },
+
+                { }     /* terminate list */
+        };
+        const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+        if (dmi) {
+                unsigned long slot = (unsigned long)dmi->driver_data;
+                /* apply the quirk only to on-board controllers */
+                return slot == PCI_SLOT(pdev->devfn);
+        }
+
+        return false;
+}
+
 /**
  *      piix_init_one - Register PIIX ATA PCI device with kernel services
  *      @pdev: PCI device to register
@@ -1422,6 +1448,14 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
         if (!in_module_init)
                 return -ENODEV;
 
+        if (piix_broken_system_poweroff(pdev)) {
+                piix_port_info[ent->driver_data].flags |=
+                                ATA_FLAG_NO_POWEROFF_SPINDOWN |
+                                        ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+                dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+                                "on poweroff and hibernation\n");
+        }
+
         port_info[0] = piix_port_info[ent->driver_data];
         port_info[1] = piix_port_info[ent->driver_data];
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a1a6e6298c33..3c4c5ae277ba 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -46,6 +46,7 @@
 #include <linux/libata.h>
 #include <linux/hdreg.h>
 #include <linux/uaccess.h>
+#include <linux/suspend.h>
 
 #include "libata.h"
 
@@ -1303,6 +1304,17 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 
                 tf->command = ATA_CMD_VERIFY;   /* READ VERIFY */
         } else {
+                /* Some odd clown BIOSen issue spindown on power off (ACPI S4
+                 * or S5) causing some drives to spin up and down again.
+                 */
+                if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) &&
+                    system_state == SYSTEM_POWER_OFF)
+                        goto skip;
+
+                if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
+                     system_entering_hibernation())
+                        goto skip;
+
                 /* XXX: This is for backward compatibility, will be
                  * removed.  Read Documentation/feature-removal-schedule.txt
                  * for more info.
@@ -1326,8 +1338,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
                                 scmd->scsi_done = qc->scsidone;
                                 qc->scsidone = ata_delayed_done;
                         }
-                        scmd->result = SAM_STAT_GOOD;
-                        return 1;
+                        goto skip;
                 }
 
                 /* Issue ATA STANDBY IMMEDIATE command */
@@ -1343,10 +1354,13 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 
         return 0;
 
-invalid_fld:
+ invalid_fld:
         ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
         /* "Invalid field in cbd" */
         return 1;
+ skip:
+        scmd->result = SAM_STAT_GOOD;
+        return 1;
 }
 
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 5a4aad123c42..0b299b0f8172 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1322,7 +1322,7 @@ fsm_start:
                                          * condition.  Mark hint.
                                          */
                                         ata_ehi_push_desc(ehi, "ST-ATA: "
-                                                "DRQ=1 with device error, "
+                                                "DRQ=0 without device error, "
                                                 "dev_stat 0x%X", status);
                                         qc->err_mask |= AC_ERR_HSM |
                                                         AC_ERR_NODEV_HINT;
@@ -1358,6 +1358,16 @@ fsm_start:
                                         qc->err_mask |= AC_ERR_HSM;
                                 }
 
+                                /* There are oddball controllers with
+                                 * status register stuck at 0x7f and
+                                 * lbal/m/h at zero which makes it
+                                 * pass all other presence detection
+                                 * mechanisms we have.  Set NODEV_HINT
+                                 * for it.  Kernel bz#7241.
+                                 */
+                                if (status == 0x7f)
+                                        qc->err_mask |= AC_ERR_NODEV_HINT;
+
                                 /* ata_pio_sectors() might change the
                                  * state to HSM_ST_LAST. so, the state
                                  * is changed after ata_pio_sectors().
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index c2e6fb9f2ef9..ebfcda26d639 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -63,8 +63,6 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
            ata_sff_sync might be sufficient. */
         ata_sff_dma_pause(ap);
         ndelay(RB500_CF_IO_DELAY);
-
-        set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
 }
 
 static void rb532_pata_exec_command(struct ata_port *ap,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 681169c9c640..79a6c9a0b721 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -86,6 +86,10 @@ enum {
         VIA_SATA_PATA   = 0x800, /* SATA/PATA combined configuration */
 };
 
+enum {
+        VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */
+};
+
 /*
  * VIA SouthBridge chips.
  */
@@ -97,8 +101,12 @@ static const struct via_isa_bridge {
         u8 rev_max;
         u16 flags;
 } via_isa_bridges[] = {
+        { "vx855",      PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f,
+          VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
         { "vx800",      PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 |
         VIA_BAD_AST | VIA_SATA_PATA },
+        { "vt8261",     PCI_DEVICE_ID_VIA_8261,     0x00, 0x2f,
+          VIA_UDMA_133 | VIA_BAD_AST },
         { "vt8237s",    PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
         { "vt8251",     PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
         { "cx700",      PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -122,6 +130,8 @@ static const struct via_isa_bridge {
         { "vt82c586",   PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
         { "vt82c576",   PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
         { "vt82c576",   PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+        { "vtxxxx",     PCI_DEVICE_ID_VIA_ANON,    0x00, 0x2f,
+          VIA_UDMA_133 | VIA_BAD_AST },
         { NULL }
 };
 
@@ -460,6 +470,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         static int printed_version;
         u8 enable;
         u32 timing;
+        unsigned long flags = id->driver_data;
         int rc;
 
         if (!printed_version++)
@@ -469,9 +480,13 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         if (rc)
                 return rc;
 
+        if (flags & VIA_IDFLAG_SINGLE)
+                ppi[1] = &ata_dummy_port_info;
+
         /* To find out how the IDE will behave and what features we
            actually have to look at the bridge not the IDE controller */
-        for (config = via_isa_bridges; config->id; config++)
+        for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON;
+             config++)
                 if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
                         !!(config->flags & VIA_BAD_ID),
                         config->id, NULL))) {
@@ -482,10 +497,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
                         pci_dev_put(isa);
                 }
 
-        if (!config->id) {
-                printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
-                return -ENODEV;
-        }
         pci_dev_put(isa);
 
         if (!(config->flags & VIA_NO_ENABLES)) {
@@ -587,6 +598,7 @@ static const struct pci_device_id via[] = {
         { PCI_VDEVICE(VIA, 0x1571), },
         { PCI_VDEVICE(VIA, 0x3164), },
         { PCI_VDEVICE(VIA, 0x5324), },
+        { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
 
         { },
 };
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 86918634a4c5..f2d8a020ea53 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -33,10 +33,6 @@
  *
  * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
  *
- * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
- *
- * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
- *
  * --> Develop a low-power-consumption strategy, and implement it.
  *
  * --> [Experiment, low priority] Investigate interrupt coalescing.
@@ -72,7 +68,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "sata_mv"
-#define DRV_VERSION     "1.24"
+#define DRV_VERSION     "1.25"
 
 enum {
         /* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -351,8 +347,6 @@ enum {
 
         EDMA_HALTCOND_OFS       = 0x60,         /* GenIIe halt conditions */
 
-        GEN_II_NCQ_MAX_SECTORS  = 256,          /* max sects/io on Gen2 w/NCQ */
-
         /* Host private flags (hp_flags) */
         MV_HP_FLAG_MSI          = (1 << 0),
         MV_HP_ERRATA_50XXB0     = (1 << 1),
@@ -883,19 +877,15 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
                 struct mv_host_priv *hpriv = ap->host->private_data;
                 int hardport = mv_hardport_from_port(ap->port_no);
                 void __iomem *hc_mmio = mv_hc_base_from_port(
-                                        mv_host_base(ap->host), hardport);
-                u32 hc_irq_cause, ipending;
+                                        mv_host_base(ap->host), ap->port_no);
+                u32 hc_irq_cause;
 
                 /* clear EDMA event indicators, if any */
                 writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
-                /* clear EDMA interrupt indicator, if any */
-                hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-                ipending = (DEV_IRQ | DMA_IRQ) << hardport;
-                if (hc_irq_cause & ipending) {
-                        writelfl(hc_irq_cause & ~ipending,
-                                 hc_mmio + HC_IRQ_CAUSE_OFS);
-                }
+                /* clear pending irq events */
+                hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
+                writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
                 mv_edma_cfg(ap, want_ncq);
 
@@ -1099,20 +1089,12 @@ static void mv6_dev_config(struct ata_device *adev)
          *
          * Gen-II does not support NCQ over a port multiplier
          *  (no FIS-based switching).
-         *
-         * We don't have hob_nsect when doing NCQ commands on Gen-II.
-         * See mv_qc_prep() for more info.
          */
         if (adev->flags & ATA_DFLAG_NCQ) {
                 if (sata_pmp_attached(adev->link->ap)) {
                         adev->flags &= ~ATA_DFLAG_NCQ;
                         ata_dev_printk(adev, KERN_INFO,
                                 "NCQ disabled for command-based switching\n");
-                } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
-                        adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
-                        ata_dev_printk(adev, KERN_INFO,
-                                "max_sectors limited to %u for NCQ\n",
-                                adev->max_sectors);
                 }
         }
 }
@@ -1450,7 +1432,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
          * only 11 bytes...so we must pick and choose required
          * registers based on the command.  So, we drop feature and
          * hob_feature for [RW] DMA commands, but they are needed for
-         * NCQ.  NCQ will drop hob_nsect.
+         * NCQ.  NCQ will drop hob_nsect, which is not needed there
+         * (nsect is used only for the tag; feat/hob_feat hold true nsect).
          */
         switch (tf->command) {
         case ATA_CMD_READ:
@@ -2214,9 +2197,15 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
         struct ata_host *host = dev_instance;
         struct mv_host_priv *hpriv = host->private_data;
         unsigned int handled = 0;
+        int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI;
         u32 main_irq_cause, pending_irqs;
 
         spin_lock(&host->lock);
+
+        /* for MSI:  block new interrupts while in here */
+        if (using_msi)
+                writel(0, hpriv->main_irq_mask_addr);
+
         main_irq_cause = readl(hpriv->main_irq_cause_addr);
         pending_irqs   = main_irq_cause & hpriv->main_irq_mask;
         /*
@@ -2230,6 +2219,11 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
                         handled = mv_host_intr(host, pending_irqs);
         }
         spin_unlock(&host->lock);
+
+        /* for MSI: unmask; interrupt cause bits will retrigger now */
+        if (using_msi)
+                writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+
         return IRQ_RETVAL(handled);
 }
 
@@ -2821,8 +2815,7 @@ static void mv_eh_thaw(struct ata_port *ap)
         writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
         /* clear pending irq events */
-        hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-        hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
+        hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
         writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
         mv_enable_port_irqs(ap, ERR_IRQ);
@@ -3075,6 +3068,9 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
                 hpriv->main_irq_mask_addr  = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
         }
 
+        /* initialize shadow irq mask with register's value */
+        hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr);
+
         /* global interrupt mask: 0 == mask everything */
         mv_set_main_irq_mask(host, ~0, 0);
 
@@ -3430,9 +3426,9 @@ static int mv_pci_init_one(struct pci_dev *pdev,
         if (rc)
                 return rc;
 
-        /* Enable interrupts */
-        if (msi && pci_enable_msi(pdev))
-                pci_intx(pdev, 1);
+        /* Enable message-switched interrupts, if requested */
+        if (msi && pci_enable_msi(pdev) == 0)
+                hpriv->hp_flags |= MV_HP_FLAG_MSI;
 
         mv_dump_pci_cfg(pdev, 0x68);
         mv_print_info(host);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 6f1460614325..c49ad0e61b6f 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -305,10 +305,10 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance);
 static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+                                   unsigned long deadline);
 static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
-                            unsigned long deadline);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
 static int nv_adma_slave_config(struct scsi_device *sdev);
@@ -352,6 +352,7 @@ enum nv_host_type
         NFORCE3 = NFORCE2,      /* NF2 == NF3 as far as sata_nv is concerned */
         CK804,
         ADMA,
+        MCP5x,
         SWNCQ,
 };
 
@@ -363,10 +364,10 @@ static const struct pci_device_id nv_pci_tbl[] = {
         { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
         { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
         { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
-        { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ },
-        { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ },
-        { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ },
-        { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ },
+        { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x },
+        { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x },
+        { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x },
+        { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x },
         { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
         { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
         { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
@@ -432,7 +433,7 @@ static struct ata_port_operations nv_nf2_ops = {
         .inherits               = &nv_common_ops,
         .freeze                 = nv_nf2_freeze,
         .thaw                   = nv_nf2_thaw,
-        .hardreset              = nv_nf2_hardreset,
+        .hardreset              = nv_noclassify_hardreset,
 };
 
 /* CK804 finally gets hardreset right */
@@ -467,8 +468,19 @@ static struct ata_port_operations nv_adma_ops = {
         .host_stop              = nv_adma_host_stop,
 };
 
+/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to
+ * work, hardreset should be used and hardreset can't report proper
+ * signature, which suggests that mcp5x is closer to nf2 as long as
+ * reset quirkiness is concerned.  Define separate ops for mcp5x with
+ * nv_noclassify_hardreset().
+ */
+static struct ata_port_operations nv_mcp5x_ops = {
+        .inherits               = &nv_common_ops,
+        .hardreset              = nv_noclassify_hardreset,
+};
+
 static struct ata_port_operations nv_swncq_ops = {
-        .inherits               = &nv_generic_ops,
+        .inherits               = &nv_mcp5x_ops,
 
         .qc_defer               = ata_std_qc_defer,
         .qc_prep                = nv_swncq_qc_prep,
@@ -531,6 +543,15 @@ static const struct ata_port_info nv_port_info[] = {
                 .port_ops       = &nv_adma_ops,
                 .private_data   = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
         },
+        /* MCP5x */
+        {
+                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+                .pio_mask       = NV_PIO_MASK,
+                .mwdma_mask     = NV_MWDMA_MASK,
+                .udma_mask      = NV_UDMA_MASK,
+                .port_ops       = &nv_mcp5x_ops,
+                .private_data   = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
+        },
         /* SWNCQ */
         {
                 .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@@ -1530,6 +1551,17 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
         return 0;
 }
 
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+                                   unsigned long deadline)
+{
+        bool online;
+        int rc;
+
+        rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+                                 &online, NULL);
+        return online ? -EAGAIN : rc;
+}
+
 static void nv_nf2_freeze(struct ata_port *ap)
 {
         void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
@@ -1554,17 +1586,6 @@ static void nv_nf2_thaw(struct ata_port *ap)
         iowrite8(mask, scr_addr + NV_INT_ENABLE);
 }
 
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
-                            unsigned long deadline)
-{
-        bool online;
-        int rc;
-
-        rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
-                                 &online, NULL);
-        return online ? -EAGAIN : rc;
-}
-
 static void nv_ck804_freeze(struct ata_port *ap)
 {
         void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
@@ -2355,14 +2376,9 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         if (type == CK804 && adma_enabled) {
                 dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
                 type = ADMA;
-        }
-
-        if (type == SWNCQ) {
-                if (swncq_enabled)
-                        dev_printk(KERN_NOTICE, &pdev->dev,
-                                   "Using SWNCQ mode\n");
-                else
-                        type = GENERIC;
+        } else if (type == MCP5x && swncq_enabled) {
+                dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+                type = SWNCQ;
         }
 
         ppi[0] = &nv_port_info[type];
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 564c142b03b0..9f029595f454 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -44,6 +44,7 @@
 #include <linux/device.h>
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
+#include <linux/dmi.h>
 
 #define DRV_NAME        "sata_sil"
 #define DRV_VERSION     "2.4"
@@ -695,11 +696,38 @@ static void sil_init_controller(struct ata_host *host)
         }
 }
 
+static bool sil_broken_system_poweroff(struct pci_dev *pdev)
+{
+        static const struct dmi_system_id broken_systems[] = {
+                {
+                        .ident = "HP Compaq nx6325",
+                        .matches = {
+                                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+                                DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+                        },
+                        /* PCI slot number of the controller */
+                        .driver_data = (void *)0x12UL,
+                },
+
+                { }     /* terminate list */
+        };
+        const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+        if (dmi) {
+                unsigned long slot = (unsigned long)dmi->driver_data;
+                /* apply the quirk only to on-board controllers */
+                return slot == PCI_SLOT(pdev->devfn);
+        }
+
+        return false;
+}
+
 static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
         static int printed_version;
         int board_id = ent->driver_data;
-        const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+        struct ata_port_info pi = sil_port_info[board_id];
+        const struct ata_port_info *ppi[] = { &pi, NULL };
         struct ata_host *host;
         void __iomem *mmio_base;
         int n_ports, rc;
@@ -713,6 +741,13 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         if (board_id == sil_3114)
                 n_ports = 4;
 
+        if (sil_broken_system_poweroff(pdev)) {
+                pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN |
+                                        ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+                dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+                                "on poweroff and hibernation\n");
+        }
+
         host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
         if (!host)
                 return -ENOMEM;
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 55e530942ab0..f3eae630e589 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1280,7 +1280,7 @@ EXPORT_SYMBOL_GPL(__root_device_register);
 
 /**
  * root_device_unregister - unregister and free a root device
- * @root: device going away.
+ * @dev: device going away
  *
  * This function unregisters and cleans up a device that was created by
  * root_device_register().
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index d33e5ab06177..bc84e125c6bc 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1817,8 +1817,10 @@ got_driver:
                 /* check whether we're reopening an existing tty */
                 tty = tty_driver_lookup_tty(driver, inode, index);
 
-                if (IS_ERR(tty))
+                if (IS_ERR(tty)) {
+                        mutex_unlock(&tty_mutex);
                         return PTR_ERR(tty);
+                }
         }
 
         if (tty) {
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index cd2e3b8087e7..24f3ca851523 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -36,7 +36,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
         struct csrow_info               *csrow = &mci->csrows[0];
         unsigned long                   address, pfn, offset, syndrome;
 
-        dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n",
+        dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n",
                 priv->node, chan, ar);
 
         /* Address decoding is likely a bit bogus, to dbl check */
@@ -58,7 +58,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar)
         struct csrow_info               *csrow = &mci->csrows[0];
         unsigned long                   address, pfn, offset;
 
-        dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n",
+        dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n",
                 priv->node, chan, ar);
 
         /* Address decoding is likely a bit bogus, to dbl check */
@@ -169,7 +169,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev)
 
         /* Get channel population */
         reg = in_be64(&regs->mic_mnt_cfg);
-        dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg);
+        dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg);
         chanmask = 0;
         if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP)
                 chanmask |= 0x1;
@@ -180,7 +180,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev)
                          "Yuck ! No channel populated ? Aborting !\n");
                 return -ENODEV;
         }
-        dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n",
+        dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n",
                 in_be64(&regs->mic_fir));
 
         /* Allocate & init EDAC MC data structure */
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index 6bd91a15d5e6..7be2cf3514e7 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -232,7 +232,7 @@ fw_card_bm_work(struct work_struct *work)
         root_id = root_node->node_id;
         grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10));
 
-        if (card->bm_generation + 1 == generation ||
+        if (is_next_generation(generation, card->bm_generation) ||
             (card->bm_generation != generation && grace)) {
                 /*
                  * This first step is to figure out who is IRM and
@@ -512,7 +512,7 @@ fw_core_remove_card(struct fw_card *card)
         fw_core_initiate_bus_reset(card, 1);
 
         mutex_lock(&card_mutex);
-        list_del(&card->link);
+        list_del_init(&card->link);
         mutex_unlock(&card_mutex);
 
         /* Set up the dummy driver. */
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index 2af5a8d1e012..bf53acb45652 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -25,6 +25,7 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/idr.h>
+#include <linux/jiffies.h>
 #include <linux/string.h>
 #include <linux/rwsem.h>
 #include <linux/semaphore.h>
@@ -634,12 +635,39 @@ struct fw_device *fw_device_get_by_devt(dev_t devt)
         return device;
 }
 
+/*
+ * These defines control the retry behavior for reading the config
+ * rom.  It shouldn't be necessary to tweak these; if the device
+ * doesn't respond to a config rom read within 10 seconds, it's not
+ * going to respond at all.  As for the initial delay, a lot of
+ * devices will be able to respond within half a second after bus
+ * reset.  On the other hand, it's not really worth being more
+ * aggressive than that, since it scales pretty well; if 10 devices
+ * are plugged in, they're all getting read within one second.
+ */
+
+#define MAX_RETRIES     10
+#define RETRY_DELAY     (3 * HZ)
+#define INITIAL_DELAY   (HZ / 2)
+#define SHUTDOWN_DELAY  (2 * HZ)
+
 static void fw_device_shutdown(struct work_struct *work)
 {
         struct fw_device *device =
                 container_of(work, struct fw_device, work.work);
         int minor = MINOR(device->device.devt);
 
+        if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)
+            && !list_empty(&device->card->link)) {
+                schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
+                return;
+        }
+
+        if (atomic_cmpxchg(&device->state,
+                           FW_DEVICE_GONE,
+                           FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE)
+                return;
+
         fw_device_cdev_remove(device);
         device_for_each_child(&device->device, NULL, shutdown_unit);
         device_unregister(&device->device);
@@ -647,6 +675,7 @@ static void fw_device_shutdown(struct work_struct *work)
         down_write(&fw_device_rwsem);
         idr_remove(&fw_device_idr, minor);
         up_write(&fw_device_rwsem);
+
         fw_device_put(device);
 }
 
@@ -654,25 +683,63 @@ static struct device_type fw_device_type = {
         .release        = fw_device_release,
 };
 
+static void fw_device_update(struct work_struct *work);
+
 /*
- * These defines control the retry behavior for reading the config
- * rom.  It shouldn't be necessary to tweak these; if the device
- * doesn't respond to a config rom read within 10 seconds, it's not
- * going to respond at all.  As for the initial delay, a lot of
- * devices will be able to respond within half a second after bus
- * reset.  On the other hand, it's not really worth being more
- * aggressive than that, since it scales pretty well; if 10 devices
- * are plugged in, they're all getting read within one second.
+ * If a device was pending for deletion because its node went away but its
+ * bus info block and root directory header matches that of a newly discovered
+ * device, revive the existing fw_device.
+ * The newly allocated fw_device becomes obsolete instead.
  */
+static int lookup_existing_device(struct device *dev, void *data)
+{
+        struct fw_device *old = fw_device(dev);
+        struct fw_device *new = data;
+        struct fw_card *card = new->card;
+        int match = 0;
+
+        down_read(&fw_device_rwsem); /* serialize config_rom access */
+        spin_lock_irq(&card->lock);  /* serialize node access */
+
+        if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 &&
+            atomic_cmpxchg(&old->state,
+                           FW_DEVICE_GONE,
+                           FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+                struct fw_node *current_node = new->node;
+                struct fw_node *obsolete_node = old->node;
+
+                new->node = obsolete_node;
+                new->node->data = new;
+                old->node = current_node;
+                old->node->data = old;
+
+                old->max_speed = new->max_speed;
+                old->node_id = current_node->node_id;
+                smp_wmb();  /* update node_id before generation */
+                old->generation = card->generation;
+                old->config_rom_retries = 0;
+                fw_notify("rediscovered device %s\n", dev_name(dev));
 
-#define MAX_RETRIES     10
-#define RETRY_DELAY     (3 * HZ)
-#define INITIAL_DELAY   (HZ / 2)
+                PREPARE_DELAYED_WORK(&old->work, fw_device_update);
+                schedule_delayed_work(&old->work, 0);
+
+                if (current_node == card->root_node)
+                        fw_schedule_bm_work(card, 0);
+
+                match = 1;
+        }
+
+        spin_unlock_irq(&card->lock);
+        up_read(&fw_device_rwsem);
+
+        return match;
+}
 
 static void fw_device_init(struct work_struct *work)
 {
         struct fw_device *device =
                 container_of(work, struct fw_device, work.work);
+        struct device *revived_dev;
         int minor, err;
 
         /*
@@ -696,6 +763,15 @@ static void fw_device_init(struct work_struct *work)
                 return;
         }
 
+        revived_dev = device_find_child(device->card->device,
+                                        device, lookup_existing_device);
+        if (revived_dev) {
+                put_device(revived_dev);
+                fw_device_release(&device->device);
+
+                return;
+        }
+
         device_initialize(&device->device);
 
         fw_device_get(device);
@@ -734,9 +810,10 @@ static void fw_device_init(struct work_struct *work)
          * fw_node_event().
          */
         if (atomic_cmpxchg(&device->state,
-                    FW_DEVICE_INITIALIZING,
-                    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) {
-                fw_device_shutdown(work);
+                           FW_DEVICE_INITIALIZING,
+                           FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+                PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+                schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
         } else {
                 if (device->config_rom_retries)
                         fw_notify("created device %s: GUID %08x%08x, S%d00, "
@@ -847,8 +924,8 @@ static void fw_device_refresh(struct work_struct *work)
 
         case REREAD_BIB_UNCHANGED:
                 if (atomic_cmpxchg(&device->state,
-                            FW_DEVICE_INITIALIZING,
-                            FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+                                   FW_DEVICE_INITIALIZING,
+                                   FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
                         goto gone;
 
                 fw_device_update(work);
@@ -879,8 +956,8 @@ static void fw_device_refresh(struct work_struct *work)
         create_units(device);
 
         if (atomic_cmpxchg(&device->state,
-                    FW_DEVICE_INITIALIZING,
-                    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+                           FW_DEVICE_INITIALIZING,
+                           FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
                 goto gone;
 
         fw_notify("refreshed device %s\n", dev_name(&device->device));
@@ -890,8 +967,9 @@ static void fw_device_refresh(struct work_struct *work)
  give_up:
         fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
  gone:
-        atomic_set(&device->state, FW_DEVICE_SHUTDOWN);
-        fw_device_shutdown(work);
+        atomic_set(&device->state, FW_DEVICE_GONE);
+        PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+        schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
  out:
         if (node_id == card->root_node->node_id)
                 fw_schedule_bm_work(card, 0);
@@ -995,9 +1073,10 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
                  */
                 device = node->data;
                 if (atomic_xchg(&device->state,
-                                FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) {
+                                FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
                         PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
-                        schedule_delayed_work(&device->work, 0);
+                        schedule_delayed_work(&device->work,
+                                list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);
                 }
                 break;
         }
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
index df51732608d9..8ef6ec2ca21c 100644
--- a/drivers/firewire/fw-device.h
+++ b/drivers/firewire/fw-device.h
@@ -28,6 +28,7 @@
 enum fw_device_state {
         FW_DEVICE_INITIALIZING,
         FW_DEVICE_RUNNING,
+        FW_DEVICE_GONE,
         FW_DEVICE_SHUTDOWN,
 };
 
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index ab9c01e462ef..6d19828a93a5 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -226,7 +226,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card)
 #define CONTEXT_DEAD    0x0800
 #define CONTEXT_ACTIVE  0x0400
 
-#define OHCI1394_MAX_AT_REQ_RETRIES     0x2
+#define OHCI1394_MAX_AT_REQ_RETRIES     0xf
 #define OHCI1394_MAX_AT_RESP_RETRIES    0x2
 #define OHCI1394_MAX_PHYS_RESP_RETRIES  0x8
 
@@ -896,11 +896,11 @@ static void context_stop(struct context *ctx)
         for (i = 0; i < 10; i++) {
                 reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs));
                 if ((reg & CONTEXT_ACTIVE) == 0)
-                        break;
+                        return;
 
-                fw_notify("context_stop: still active (0x%08x)\n", reg);
                 mdelay(1);
         }
+        fw_error("Error: DMA context still active (0x%08x)\n", reg);
 }
 
 struct driver_data {
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index e88d5067448c..c71c4419d9e8 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -168,6 +168,7 @@ struct sbp2_target {
         int address_high;
         unsigned int workarounds;
         unsigned int mgt_orb_timeout;
+        unsigned int max_payload;
 
         int dont_block; /* counter for each logical unit */
         int blocked;    /* ditto */
@@ -310,14 +311,16 @@ struct sbp2_command_orb {
         dma_addr_t page_table_bus;
 };
 
+#define SBP2_ROM_VALUE_WILDCARD ~0         /* match all */
+#define SBP2_ROM_VALUE_MISSING  0xff000000 /* not present in the unit dir. */
+
 /*
  * List of devices with known bugs.
  *
  * The firmware_revision field, masked with 0xffff00, is the best
  * indicator for the type of bridge chip of a device.  It yields a few
  * false positives but this did not break correctly behaving devices
- * so far.  We use ~0 as a wildcard, since the 24 bit values we get
- * from the config rom can never match that.
+ * so far.
  */
 static const struct {
         u32 firmware_revision;
@@ -339,33 +342,35 @@ static const struct {
         },
         /* Initio bridges, actually only needed for some older ones */ {
                 .firmware_revision      = 0x000200,
-                .model                  = ~0,
+                .model                  = SBP2_ROM_VALUE_WILDCARD,
                 .workarounds            = SBP2_WORKAROUND_INQUIRY_36,
         },
         /* PL-3507 bridge with Prolific firmware */ {
                 .firmware_revision      = 0x012800,
-                .model                  = ~0,
+                .model                  = SBP2_ROM_VALUE_WILDCARD,
                 .workarounds            = SBP2_WORKAROUND_POWER_CONDITION,
         },
         /* Symbios bridge */ {
                 .firmware_revision      = 0xa0b800,
-                .model                  = ~0,
+                .model                  = SBP2_ROM_VALUE_WILDCARD,
                 .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
         },
         /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
                 .firmware_revision      = 0x002600,
-                .model                  = ~0,
+                .model                  = SBP2_ROM_VALUE_WILDCARD,
                 .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
         },
-
         /*
-         * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
-         * these iPods do not feature the read_capacity bug according
-         * to one report.  Read_capacity behaviour as well as model_id
-         * could change due to Apple-supplied firmware updates though.
+         * iPod 2nd generation: needs 128k max transfer size workaround
+         * iPod 3rd generation: needs fix capacity workaround
          */
-
-        /* iPod 4th generation. */ {
+        {
+                .firmware_revision      = 0x0a2700,
+                .model                  = 0x000000,
+                .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS |
+                                          SBP2_WORKAROUND_FIX_CAPACITY,
+        },
+        /* iPod 4th generation */ {
                 .firmware_revision      = 0x0a2700,
                 .model                  = 0x000021,
                 .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
@@ -1092,7 +1097,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
                         continue;
 
                 if (sbp2_workarounds_table[i].model != model &&
-                    sbp2_workarounds_table[i].model != ~0)
+                    sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD)
                         continue;
 
                 w |= sbp2_workarounds_table[i].workarounds;
@@ -1142,20 +1147,28 @@ static int sbp2_probe(struct device *dev)
         fw_device_get(device);
         fw_unit_get(unit);
 
-        /* Initialize to values that won't match anything in our table. */
-        firmware_revision = 0xff000000;
-        model = 0xff000000;
-
         /* implicit directory ID */
         tgt->directory_id = ((unit->directory - device->config_rom) * 4
                              + CSR_CONFIG_ROM) & 0xffffff;
 
+        firmware_revision = SBP2_ROM_VALUE_MISSING;
+        model             = SBP2_ROM_VALUE_MISSING;
+
         if (sbp2_scan_unit_dir(tgt, unit->directory, &model,
                                &firmware_revision) < 0)
                 goto fail_tgt_put;
 
         sbp2_init_workarounds(tgt, model, firmware_revision);
 
+        /*
+         * At S100 we can do 512 bytes per packet, at S200 1024 bytes,
+         * and so on up to 4096 bytes.  The SBP-2 max_payload field
+         * specifies the max payload size as 2 ^ (max_payload + 2), so
+         * if we set this to max_speed + 7, we get the right value.
+         */
+        tgt->max_payload = min(device->max_speed + 7, 10U);
+        tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1);
+
         /* Do the login in a workqueue so we can easily reschedule retries. */
         list_for_each_entry(lu, &tgt->lu_list, link)
                 sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
@@ -1273,6 +1286,19 @@ static struct fw_driver sbp2_driver = {
         .id_table = sbp2_id_table,
 };
 
+static void sbp2_unmap_scatterlist(struct device *card_device,
+                                   struct sbp2_command_orb *orb)
+{
+        if (scsi_sg_count(orb->cmd))
+                dma_unmap_sg(card_device, scsi_sglist(orb->cmd),
+                             scsi_sg_count(orb->cmd),
+                             orb->cmd->sc_data_direction);
+
+        if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT))
+                dma_unmap_single(card_device, orb->page_table_bus,
+                                 sizeof(orb->page_table), DMA_TO_DEVICE);
+}
+
 static unsigned int
 sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
 {
@@ -1352,15 +1378,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
 
         dma_unmap_single(device->card->device, orb->base.request_bus,
                          sizeof(orb->request), DMA_TO_DEVICE);
-
-        if (scsi_sg_count(orb->cmd) > 0)
-                dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd),
-                             scsi_sg_count(orb->cmd),
-                             orb->cmd->sc_data_direction);
-
-        if (orb->page_table_bus != 0)
-                dma_unmap_single(device->card->device, orb->page_table_bus,
-                                 sizeof(orb->page_table), DMA_TO_DEVICE);
+        sbp2_unmap_scatterlist(device->card->device, orb);
 
         orb->cmd->result = result;
         orb->done(orb->cmd);
@@ -1434,7 +1452,6 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
         struct sbp2_logical_unit *lu = cmd->device->hostdata;
         struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
         struct sbp2_command_orb *orb;
-        unsigned int max_payload;
         int generation, retval = SCSI_MLQUEUE_HOST_BUSY;
 
         /*
@@ -1462,17 +1479,9 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
         orb->done = done;
         orb->cmd  = cmd;
 
-        orb->request.next.high   = cpu_to_be32(SBP2_ORB_NULL);
-        /*
-         * At speed 100 we can do 512 bytes per packet, at speed 200,
-         * 1024 bytes per packet etc.  The SBP-2 max_payload field
-         * specifies the max payload size as 2 ^ (max_payload + 2), so
-         * if we set this to max_speed + 7, we get the right value.
-         */
-        max_payload = min(device->max_speed + 7,
-                          device->card->max_receive - 1);
+        orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
         orb->request.misc = cpu_to_be32(
-                COMMAND_ORB_MAX_PAYLOAD(max_payload) |
+                COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) |
                 COMMAND_ORB_SPEED(device->max_speed) |
                 COMMAND_ORB_NOTIFY);
 
@@ -1491,8 +1500,10 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
         orb->base.request_bus =
                 dma_map_single(device->card->device, &orb->request,
                                sizeof(orb->request), DMA_TO_DEVICE);
-        if (dma_mapping_error(device->card->device, orb->base.request_bus))
+        if (dma_mapping_error(device->card->device, orb->base.request_bus)) {
+                sbp2_unmap_scatterlist(device->card->device, orb);
                 goto out;
+        }
 
         sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation,
                       lu->command_block_agent_address + SBP2_ORB_POINTER);
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index c9be6e6948c4..8dd6703b55cd 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -518,6 +518,18 @@ fw_core_handle_bus_reset(struct fw_card *card,
         struct fw_node *local_node;
         unsigned long flags;
 
+        /*
+         * If the selfID buffer is not the immediate successor of the
+         * previously processed one, we cannot reliably compare the
+         * old and new topologies.
+         */
+        if (!is_next_generation(generation, card->generation) &&
+            card->local_node != NULL) {
+                fw_notify("skipped bus generations, destroying all nodes\n");
+                fw_destroy_nodes(card);
+                card->bm_retries = 0;
+        }
+
         spin_lock_irqsave(&card->lock, flags);
 
         card->node_id = node_id;
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index c9ab12a15f6e..1d78e9cc5940 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -276,6 +276,15 @@ static inline void fw_card_put(struct fw_card *card)
 extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
 
 /*
+ * Check whether new_generation is the immediate successor of old_generation.
+ * Take counter roll-over at 255 (as per to OHCI) into account.
+ */
+static inline bool is_next_generation(int new_generation, int old_generation)
+{
+        return (new_generation & 0xff) == ((old_generation + 1) & 0xff);
+}
+
+/*
  * The iso packet format allows for an immediate header/payload part
  * stored in 'header' immediately after the packet info plus an
  * indirect payload part that is pointer to by the 'payload' field.
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index d76adfea5df7..8f0f7c449305 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -415,6 +415,29 @@ void __init dmi_scan_machine(void)
 }
 
 /**
+ *      dmi_matches - check if dmi_system_id structure matches system DMI data
+ *      @dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_matches(const struct dmi_system_id *dmi)
+{
+        int i;
+
+        WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
+
+        for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) {
+                int s = dmi->matches[i].slot;
+                if (s == DMI_NONE)
+                        continue;
+                if (dmi_ident[s]
+                    && strstr(dmi_ident[s], dmi->matches[i].substr))
+                        continue;
+                /* No match */
+                return false;
+        }
+        return true;
+}
+
+/**
  *      dmi_check_system - check system DMI data
  *      @list: array of dmi_system_id structures to match against
  *              All non-null elements of the list must match
@@ -429,32 +452,45 @@ void __init dmi_scan_machine(void)
  */
 int dmi_check_system(const struct dmi_system_id *list)
 {
-        int i, count = 0;
-        const struct dmi_system_id *d = list;
-
-        WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
-
-        while (d->ident) {
-                for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
-                        int s = d->matches[i].slot;
-                        if (s == DMI_NONE)
-                                continue;
-                        if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr))
-                                continue;
-                        /* No match */
-                        goto fail;
+        int count = 0;
+        const struct dmi_system_id *d;
+
+        for (d = list; d->ident; d++)
+                if (dmi_matches(d)) {
+                        count++;
+                        if (d->callback && d->callback(d))
+                                break;
                 }
-                count++;
-                if (d->callback && d->callback(d))
-                        break;
-fail:           d++;
-        }
 
         return count;
 }
 EXPORT_SYMBOL(dmi_check_system);
 
 /**
+ *      dmi_first_match - find dmi_system_id structure matching system DMI data
+ *      @list: array of dmi_system_id structures to match against
+ *              All non-null elements of the list must match
+ *              their slot's (field index's) data (i.e., each
+ *              list string must be a substring of the specified
+ *              DMI slot's string data) to be considered a
+ *              successful match.
+ *
+ *      Walk the blacklist table until the first match is found.  Return the
+ *      pointer to the matching entry or NULL if there's no match.
+ */
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)
+{
+        const struct dmi_system_id *d;
+
+        for (d = list; d->ident; d++)
+                if (dmi_matches(d))
+                        return d;
+
+        return NULL;
+}
+EXPORT_SYMBOL(dmi_first_match);
+
+/**
  *      dmi_get_system_info - return DMI data value
  *      @field: data index (see enum dmi_field)
  *
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 35e7aea4222c..42fb2fd24c0c 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -789,6 +789,7 @@ int gpio_request(unsigned gpio, const char *label)
         } else {
                 status = -EBUSY;
                 module_put(chip->owner);
+                goto done;
         }
 
         if (chip->request) {
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 477caa1b1e4b..69aa0ab28403 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -106,8 +106,6 @@ void drm_vblank_cleanup(struct drm_device *dev)
 
         drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs,
                  DRM_MEM_DRIVER);
-        drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs,
-                 DRM_MEM_DRIVER);
         drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) *
                  dev->num_crtcs, DRM_MEM_DRIVER);
         drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) *
@@ -132,7 +130,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs)
         setup_timer(&dev->vblank_disable_timer, vblank_disable_fn,
                     (unsigned long)dev);
         spin_lock_init(&dev->vbl_lock);
-        atomic_set(&dev->vbl_signal_pending, 0);
         dev->num_crtcs = num_crtcs;
 
         dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs,
@@ -140,11 +137,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs)
         if (!dev->vbl_queue)
                 goto err;
 
-        dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs,
-                                  DRM_MEM_DRIVER);
-        if (!dev->vbl_sigs)
-                goto err;
-
         dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs,
                                       DRM_MEM_DRIVER);
         if (!dev->_vblank_count)
@@ -177,7 +169,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs)
         /* Zero per-crtc vblank stuff */
         for (i = 0; i < num_crtcs; i++) {
                 init_waitqueue_head(&dev->vbl_queue[i]);
-                INIT_LIST_HEAD(&dev->vbl_sigs[i]);
                 atomic_set(&dev->_vblank_count[i], 0);
                 atomic_set(&dev->vblank_refcount[i], 0);
         }
@@ -540,15 +531,10 @@ out:
  * \param data user argument, pointing to a drm_wait_vblank structure.
  * \return zero on success or a negative number on failure.
  *
- * Verifies the IRQ is installed.
- *
- * If a signal is requested checks if this task has already scheduled the same signal
- * for the same vblank sequence number - nothing to be done in
- * that case. If the number of tasks waiting for the interrupt exceeds 100 the
- * function fails. Otherwise adds a new entry to drm_device::vbl_sigs for this
- * task.
- *
- * If a signal is not requested, then calls vblank_wait().
+ * This function enables the vblank interrupt on the pipe requested, then
+ * sleeps waiting for the requested sequence number to occur, and drops
+ * the vblank interrupt refcount afterwards. (vblank irq disable follows that
+ * after a timeout with no further vblank waits scheduled).
  */
 int drm_wait_vblank(struct drm_device *dev, void *data,
                     struct drm_file *file_priv)
@@ -560,6 +546,9 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
         if ((!dev->pdev->irq) || (!dev->irq_enabled))
                 return -EINVAL;
 
+        if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
+                return -EINVAL;
+
         if (vblwait->request.type &
             ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) {
                 DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n",
@@ -597,89 +586,26 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
                 vblwait->request.sequence = seq + 1;
         }
 
-        if (flags & _DRM_VBLANK_SIGNAL) {
-                unsigned long irqflags;
-                struct list_head *vbl_sigs = &dev->vbl_sigs[crtc];
-                struct drm_vbl_sig *vbl_sig;
-
-                spin_lock_irqsave(&dev->vbl_lock, irqflags);
-
-                /* Check if this task has already scheduled the same signal
-                 * for the same vblank sequence number; nothing to be done in
-                 * that case
-                 */
-                list_for_each_entry(vbl_sig, vbl_sigs, head) {
-                        if (vbl_sig->sequence == vblwait->request.sequence
-                            && vbl_sig->info.si_signo ==
-                            vblwait->request.signal
-                            && vbl_sig->task == current) {
-                                spin_unlock_irqrestore(&dev->vbl_lock,
-                                                       irqflags);
-                                vblwait->reply.sequence = seq;
-                                goto done;
-                        }
-                }
-
-                if (atomic_read(&dev->vbl_signal_pending) >= 100) {
-                        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-                        ret = -EBUSY;
-                        goto done;
-                }
-
-                spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-
-                vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig),
-                                     DRM_MEM_DRIVER);
-                if (!vbl_sig) {
-                        ret = -ENOMEM;
-                        goto done;
-                }
-
-                /* Get a refcount on the vblank, which will be released by
-                 * drm_vbl_send_signals().
-                 */
-                ret = drm_vblank_get(dev, crtc);
-                if (ret) {
-                        drm_free(vbl_sig, sizeof(struct drm_vbl_sig),
-                                 DRM_MEM_DRIVER);
-                        goto done;
-                }
-
-                atomic_inc(&dev->vbl_signal_pending);
-
-                vbl_sig->sequence = vblwait->request.sequence;
-                vbl_sig->info.si_signo = vblwait->request.signal;
-                vbl_sig->task = current;
+        DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
+                  vblwait->request.sequence, crtc);
+        dev->last_vblank_wait[crtc] = vblwait->request.sequence;
+        DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
+                    (((drm_vblank_count(dev, crtc) -
+                       vblwait->request.sequence) <= (1 << 23)) ||
+                     !dev->irq_enabled));
 
-                spin_lock_irqsave(&dev->vbl_lock, irqflags);
-
-                list_add_tail(&vbl_sig->head, vbl_sigs);
+        if (ret != -EINTR) {
+                struct timeval now;
 
-                spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+                do_gettimeofday(&now);
 
-                vblwait->reply.sequence = seq;
+                vblwait->reply.tval_sec = now.tv_sec;
+                vblwait->reply.tval_usec = now.tv_usec;
+                vblwait->reply.sequence = drm_vblank_count(dev, crtc);
+                DRM_DEBUG("returning %d to client\n",
+                          vblwait->reply.sequence);
         } else {
-                DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
-                          vblwait->request.sequence, crtc);
-                dev->last_vblank_wait[crtc] = vblwait->request.sequence;
-                DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
-                            (((drm_vblank_count(dev, crtc) -
-                               vblwait->request.sequence) <= (1 << 23)) ||
-                             !dev->irq_enabled));
-
-                if (ret != -EINTR) {
-                        struct timeval now;
-
-                        do_gettimeofday(&now);
-
-                        vblwait->reply.tval_sec = now.tv_sec;
-                        vblwait->reply.tval_usec = now.tv_usec;
-                        vblwait->reply.sequence = drm_vblank_count(dev, crtc);
-                        DRM_DEBUG("returning %d to client\n",
-                                  vblwait->reply.sequence);
-                } else {
-                        DRM_DEBUG("vblank wait interrupted by signal\n");
-                }
+                DRM_DEBUG("vblank wait interrupted by signal\n");
         }
 
 done:
@@ -688,46 +614,6 @@ done:
 }
 
 /**
- * Send the VBLANK signals.
- *
- * \param dev DRM device.
- * \param crtc CRTC where the vblank event occurred
- *
- * Sends a signal for each task in drm_device::vbl_sigs and empties the list.
- *
- * If a signal is not requested, then calls vblank_wait().
- */
-static void drm_vbl_send_signals(struct drm_device *dev, int crtc)
-{
-        struct drm_vbl_sig *vbl_sig, *tmp;
-        struct list_head *vbl_sigs;
-        unsigned int vbl_seq;
-        unsigned long flags;
-
-        spin_lock_irqsave(&dev->vbl_lock, flags);
-
-        vbl_sigs = &dev->vbl_sigs[crtc];
-        vbl_seq = drm_vblank_count(dev, crtc);
-
-        list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) {
-            if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
-                vbl_sig->info.si_code = vbl_seq;
-                send_sig_info(vbl_sig->info.si_signo,
-                              &vbl_sig->info, vbl_sig->task);
-
-                list_del(&vbl_sig->head);
-
-                drm_free(vbl_sig, sizeof(*vbl_sig),
-                         DRM_MEM_DRIVER);
-                atomic_dec(&dev->vbl_signal_pending);
-                drm_vblank_put(dev, crtc);
-            }
-        }
-
-        spin_unlock_irqrestore(&dev->vbl_lock, flags);
-}
-
-/**
  * drm_handle_vblank - handle a vblank event
  * @dev: DRM device
  * @crtc: where this event occurred
@@ -739,6 +625,5 @@ void drm_handle_vblank(struct drm_device *dev, int crtc)
 {
         atomic_inc(&dev->_vblank_count[crtc]);
         DRM_WAKEUP(&dev->vbl_queue[crtc]);
-        drm_vbl_send_signals(dev, crtc);
 }
 EXPORT_SYMBOL(drm_handle_vblank);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6b1148fc2cbe..b36a5214d8df 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -311,7 +311,7 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
         if (dev_priv->panel_fixed_mode != NULL) {
                 struct drm_display_mode *mode;
 
-                mutex_unlock(&dev->mode_config.mutex);
+                mutex_lock(&dev->mode_config.mutex);
                 mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
                 drm_mode_probed_add(connector, mode);
                 mutex_unlock(&dev->mode_config.mutex);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 5d7640e49dc5..6cad69ed21c5 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1218,6 +1218,7 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 }
 EXPORT_SYMBOL_GPL(hid_connect);
 
+/* a list of devices for which there is a specialized driver on HID bus */
 static const struct hid_device_id hid_blacklist[] = {
         { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
         { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
@@ -1476,6 +1477,7 @@ static struct bus_type hid_bus_type = {
         .uevent         = hid_uevent,
 };
 
+/* a list of devices that shouldn't be handled by HID core at all */
 static const struct hid_device_id hid_ignore_list[] = {
         { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) },
         { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) },
@@ -1606,6 +1608,8 @@ static const struct hid_device_id hid_ignore_list[] = {
         { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) },
         { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) },
         { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) },
+        { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4) },
+        { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) },
         { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
         { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
         { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index acc1abc834a4..e899f510ebeb 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -362,6 +362,8 @@
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD       0x0038
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2      0x0036
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3      0x0034
+#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4      0x0044
+#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5      0x0045
 
 #define USB_VENDOR_ID_SUN               0x0430
 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE        0xcdab
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index d718b1607d0f..25b10dcad90d 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -30,7 +30,7 @@
 #define MS_NOGET        0x10
 
 /*
- * Microsoft Wireless Desktop Receiver (Model 1028) has several
+ * Microsoft Wireless Desktop Receiver (Model 1028) has
  * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
  */
 static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
@@ -38,17 +38,12 @@ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 {
         unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
 
-        if ((quirks & MS_RDESC) && rsize == 571 && rdesc[284] == 0x19 &&
-                        rdesc[286] == 0x2a && rdesc[304] == 0x19 &&
-                        rdesc[306] == 0x29 && rdesc[352] == 0x1a &&
-                        rdesc[355] == 0x2a && rdesc[557] == 0x19 &&
+        if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 &&
                         rdesc[559] == 0x29) {
                 dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver "
                                 "Model 1028 report descriptor\n");
-                rdesc[284] = rdesc[304] = rdesc[557] = 0x35;
-                rdesc[352] = 0x36;
-                rdesc[286] = rdesc[355] = 0x46;
-                rdesc[306] = rdesc[559] = 0x45;
+                rdesc[557] = 0x35;
+                rdesc[559] = 0x45;
         }
 }
 
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index d73eea382ab3..4940e4d70c2d 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -656,7 +656,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
         case HIDIOCGSTRING:
                 mutex_lock(&hiddev->existancelock);
-                if (!hiddev->exist)
+                if (hiddev->exist)
                         r = hiddev_ioctl_string(hiddev, cmd, user_arg);
                 else
                         r = -ENODEV;
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index e30186236588..678e34b01e52 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -83,7 +83,7 @@
 /*
  * Temperature sensors keys (sp78 - 2 bytes).
  */
-static const char* temperature_sensors_sets[][36] = {
+static const char *temperature_sensors_sets[][41] = {
 /* Set 0: Macbook Pro */
         { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H",
           "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL },
@@ -135,6 +135,13 @@ static const char* temperature_sensors_sets[][36] = {
         { "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0",
           "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P",
           "Ts0S", NULL },
+/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */
+        { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
+          "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P",
+          "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P",
+          "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
+          "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
+          NULL },
 };
 
 /* List of keys used to read/write fan speeds */
@@ -1153,6 +1160,16 @@ static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO,
                                         applesmc_show_temperature, NULL, 33);
 static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO,
                                         applesmc_show_temperature, NULL, 34);
+static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO,
+                                        applesmc_show_temperature, NULL, 35);
+static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO,
+                                        applesmc_show_temperature, NULL, 36);
+static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO,
+                                        applesmc_show_temperature, NULL, 37);
+static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO,
+                                        applesmc_show_temperature, NULL, 38);
+static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO,
+                                        applesmc_show_temperature, NULL, 39);
 
 static struct attribute *temperature_attributes[] = {
         &sensor_dev_attr_temp1_input.dev_attr.attr,
@@ -1190,6 +1207,11 @@ static struct attribute *temperature_attributes[] = {
         &sensor_dev_attr_temp33_input.dev_attr.attr,
         &sensor_dev_attr_temp34_input.dev_attr.attr,
         &sensor_dev_attr_temp35_input.dev_attr.attr,
+        &sensor_dev_attr_temp36_input.dev_attr.attr,
+        &sensor_dev_attr_temp37_input.dev_attr.attr,
+        &sensor_dev_attr_temp38_input.dev_attr.attr,
+        &sensor_dev_attr_temp39_input.dev_attr.attr,
+        &sensor_dev_attr_temp40_input.dev_attr.attr,
         NULL
 };
 
@@ -1312,6 +1334,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
         { .accelerometer = 0, .light = 0, .temperature_set = 14 },
 /* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */
         { .accelerometer = 1, .light = 1, .temperature_set = 15 },
+/* MacPro3,1: temperature set 16 */
+        { .accelerometer = 0, .light = 0, .temperature_set = 16 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1369,6 +1393,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
           DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
           DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
                 &applesmc_dmi_data[4]},
+        { applesmc_dmi_match, "Apple MacPro3", {
+          DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+          DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") },
+                &applesmc_dmi_data[16]},
         { applesmc_dmi_match, "Apple MacPro", {
           DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
           DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h
index e0ae0d3d747f..af320e2c5079 100644
--- a/drivers/ieee1394/ieee1394.h
+++ b/drivers/ieee1394/ieee1394.h
@@ -54,9 +54,7 @@
 #define IEEE1394_SPEED_800      0x03
 #define IEEE1394_SPEED_1600     0x04
 #define IEEE1394_SPEED_3200     0x05
-
-/* The current highest tested speed supported by the subsystem */
-#define IEEE1394_SPEED_MAX      IEEE1394_SPEED_800
+#define IEEE1394_SPEED_MAX      IEEE1394_SPEED_3200
 
 /* Maps speed values above to a string representation */
 extern const char *hpsb_speedto_str[];
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index dcdb71a7718d..2beb8d94f7bd 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -338,6 +338,7 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
         u8 cldcnt[nodecount];
         u8 *map = host->speed_map;
         u8 *speedcap = host->speed;
+        u8 local_link_speed = host->csr.lnk_spd;
         struct selfid *sid;
         struct ext_selfid *esid;
         int i, j, n;
@@ -373,8 +374,8 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
                         if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++;
 
                         speedcap[n] = sid->speed;
-                        if (speedcap[n] > host->csr.lnk_spd)
-                                speedcap[n] = host->csr.lnk_spd;
+                        if (speedcap[n] > local_link_speed)
+                                speedcap[n] = local_link_speed;
                         n--;
                 }
         }
@@ -407,12 +408,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
                 }
         }
 
-#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX
-        /* assume maximum speed for 1394b PHYs, nodemgr will correct it */
-        for (n = 0; n < nodecount; n++)
-                if (speedcap[n] == SELFID_SPEED_UNKNOWN)
-                        speedcap[n] = IEEE1394_SPEED_MAX;
-#endif
+        /* assume a maximum speed for 1394b PHYs, nodemgr will correct it */
+        if (local_link_speed > SELFID_SPEED_UNKNOWN)
+                for (i = 0; i < nodecount; i++)
+                        if (speedcap[i] == SELFID_SPEED_UNKNOWN)
+                                speedcap[i] = local_link_speed;
 }
 
 
diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h
index 4320bf010495..7fb8ab9780ae 100644
--- a/drivers/ieee1394/ohci1394.h
+++ b/drivers/ieee1394/ohci1394.h
@@ -26,7 +26,7 @@
 
 #define OHCI1394_DRIVER_NAME      "ohci1394"
 
-#define OHCI1394_MAX_AT_REQ_RETRIES     0x2
+#define OHCI1394_MAX_AT_REQ_RETRIES     0xf
 #define OHCI1394_MAX_AT_RESP_RETRIES    0x2
 #define OHCI1394_MAX_PHYS_RESP_RETRIES  0x8
 #define OHCI1394_MAX_SELF_ID_ERRORS     16
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index ab1034ccb7fb..f3fd8657ce4b 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -115,8 +115,8 @@
  */
 static int sbp2_max_speed = IEEE1394_SPEED_MAX;
 module_param_named(max_speed, sbp2_max_speed, int, 0644);
-MODULE_PARM_DESC(max_speed, "Force max speed "
-                 "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)");
+MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, "
+                 "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)");
 
 /*
  * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs.
@@ -256,7 +256,7 @@ static int sbp2_set_busy_timeout(struct sbp2_lu *);
 static int sbp2_max_speed_and_size(struct sbp2_lu *);
 
 
-static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC };
+static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa };
 
 static DEFINE_RWLOCK(sbp2_hi_logical_units_lock);
 
@@ -347,8 +347,8 @@ static struct scsi_host_template sbp2_shost_template = {
         .sdev_attrs              = sbp2_sysfs_sdev_attrs,
 };
 
-/* for match-all entries in sbp2_workarounds_table */
-#define SBP2_ROM_VALUE_WILDCARD 0x1000000
+#define SBP2_ROM_VALUE_WILDCARD ~0         /* match all */
+#define SBP2_ROM_VALUE_MISSING  0xff000000 /* not present in the unit dir. */
 
 /*
  * List of devices with known bugs.
@@ -359,60 +359,70 @@ static struct scsi_host_template sbp2_shost_template = {
  */
 static const struct {
         u32 firmware_revision;
-        u32 model_id;
+        u32 model;
         unsigned workarounds;
 } sbp2_workarounds_table[] = {
         /* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
                 .firmware_revision      = 0x002800,
-                .model_id               = 0x001010,
+                .model                  = 0x001010,
                 .workarounds            = SBP2_WORKAROUND_INQUIRY_36 |
                                           SBP2_WORKAROUND_MODE_SENSE_8 |
                                           SBP2_WORKAROUND_POWER_CONDITION,
         },
         /* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
                 .firmware_revision      = 0x002800,
-                .model_id               = 0x000000,
+                .model                  = 0x000000,
                 .workarounds            = SBP2_WORKAROUND_DELAY_INQUIRY |
                                           SBP2_WORKAROUND_POWER_CONDITION,
         },
         /* Initio bridges, actually only needed for some older ones */ {
                 .firmware_revision      = 0x000200,
-                .model_id               = SBP2_ROM_VALUE_WILDCARD,
+                .model                  = SBP2_ROM_VALUE_WILDCARD,
                 .workarounds            = SBP2_WORKAROUND_INQUIRY_36,
         },
         /* PL-3507 bridge with Prolific firmware */ {
                 .firmware_revision      = 0x012800,
-                .model_id               = SBP2_ROM_VALUE_WILDCARD,
+                .model                  = SBP2_ROM_VALUE_WILDCARD,
                 .workarounds            = SBP2_WORKAROUND_POWER_CONDITION,
         },
         /* Symbios bridge */ {
                 .firmware_revision      = 0xa0b800,
-                .model_id               = SBP2_ROM_VALUE_WILDCARD,
+                .model                  = SBP2_ROM_VALUE_WILDCARD,
                 .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
         },
         /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
                 .firmware_revision      = 0x002600,
-                .model_id               = SBP2_ROM_VALUE_WILDCARD,
+                .model                  = SBP2_ROM_VALUE_WILDCARD,
                 .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
         },
+        /*
+         * iPod 2nd generation: needs 128k max transfer size workaround
+         * iPod 3rd generation: needs fix capacity workaround
+         */
+        {
+                .firmware_revision      = 0x0a2700,
+                .model                  = 0x000000,
+                .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS |
+                                          SBP2_WORKAROUND_FIX_CAPACITY,
+        },
         /* iPod 4th generation */ {
                 .firmware_revision      = 0x0a2700,
-                .model_id               = 0x000021,
+                .model                  = 0x000021,
                 .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
         },
         /* iPod mini */ {
                 .firmware_revision      = 0x0a2700,
-                .model_id               = 0x000022,
+                .model                  = 0x000022,
                 .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
         },
         /* iPod mini */ {
                 .firmware_revision      = 0x0a2700,
-                .model_id               = 0x000023,
+                .model                  = 0x000023,
                 .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
         },
         /* iPod Photo */ {
                 .firmware_revision      = 0x0a2700,
-                .model_id               = 0x00007e,
+                .model                  = 0x00007e,
                 .workarounds            = SBP2_WORKAROUND_FIX_CAPACITY,
         }
 };
@@ -1341,13 +1351,15 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
         struct csr1212_keyval *kv;
         struct csr1212_dentry *dentry;
         u64 management_agent_addr;
-        u32 unit_characteristics, firmware_revision;
+        u32 unit_characteristics, firmware_revision, model;
         unsigned workarounds;
         int i;
 
         management_agent_addr = 0;
         unit_characteristics = 0;
-        firmware_revision = 0;
+        firmware_revision = SBP2_ROM_VALUE_MISSING;
+        model = ud->flags & UNIT_DIRECTORY_MODEL_ID ?
+                                ud->model_id : SBP2_ROM_VALUE_MISSING;
 
         csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) {
                 switch (kv->key.id) {
@@ -1388,9 +1400,9 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
                             sbp2_workarounds_table[i].firmware_revision !=
                             (firmware_revision & 0xffff00))
                                 continue;
-                        if (sbp2_workarounds_table[i].model_id !=
+                        if (sbp2_workarounds_table[i].model !=
                             SBP2_ROM_VALUE_WILDCARD &&
-                            sbp2_workarounds_table[i].model_id != ud->model_id)
+                            sbp2_workarounds_table[i].model != model)
                                 continue;
                         workarounds |= sbp2_workarounds_table[i].workarounds;
                         break;
@@ -1403,7 +1415,7 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
                           NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
                           workarounds, firmware_revision,
                           ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
-                          ud->model_id);
+                          model);
 
         /* We would need one SCSI host template for each target to adjust
          * max_sectors on the fly, therefore warn only. */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 90663e01a56e..60156dfdc608 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -224,7 +224,7 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
                         break;
 
                 /* If the Guest asked to be stopped, we sleep.  The Guest's
-                 * clock timer or LHCALL_BREAK from the Waker will wake us. */
+                 * clock timer or LHREQ_BREAK from the Waker will wake us. */
                 if (cpu->halted) {
                         set_current_state(TASK_INTERRUPTIBLE);
                         schedule();
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 34bc017b8b3c..b8ee103eed5f 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -307,9 +307,8 @@ static int close(struct inode *inode, struct file *file)
          * kmalloc()ed string, either of which is ok to hand to kfree(). */
         if (!IS_ERR(lg->dead))
                 kfree(lg->dead);
-        /* We clear the entire structure, which also marks it as free for the
-         * next user. */
-        memset(lg, 0, sizeof(*lg));
+        /* Free the memory allocated to the lguest_struct */
+        kfree(lg);
         /* Release lock and exit. */
         mutex_unlock(&lguest_lock);
 
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 05e298289238..10c421b73eaf 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -758,7 +758,7 @@ static void __exit ilo_exit(void)
         class_destroy(ilo_class);
 }
 
-MODULE_VERSION("0.05");
+MODULE_VERSION("0.06");
 MODULE_ALIAS(ILO_NAME);
 MODULE_DESCRIPTION(ILO_NAME);
 MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 9cd2ebe2a3b6..45fd653dbe31 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -49,9 +49,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
                 if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
                         return;
-
-                DBUG_ON(ch->local_msgqueue == NULL);
-                DBUG_ON(ch->remote_msgqueue == NULL);
         }
 
         if (!(ch->flags & XPC_C_OPENREPLY)) {
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 82fb9958f22f..2e975762c32b 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -1106,8 +1106,6 @@ xpc_process_activate_IRQ_rcvd_sn2(void)
         int n_IRQs_expected;
         int n_IRQs_detected;
 
-        DBUG_ON(xpc_activate_IRQ_rcvd == 0);
-
         spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
         n_IRQs_expected = xpc_activate_IRQ_rcvd;
         xpc_activate_IRQ_rcvd = 0;
@@ -1726,6 +1724,7 @@ xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch)
                 msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
                                              (get % ch->local_nentries) *
                                              ch->entry_size);
+                DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
                 msg->flags = 0;
         } while (++get < ch_sn2->remote_GP.get);
 }
@@ -1740,11 +1739,18 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch)
         struct xpc_msg_sn2 *msg;
         s64 put;
 
-        put = ch_sn2->w_remote_GP.put;
+        /* flags are zeroed when the buffer is allocated */
+        if (ch_sn2->remote_GP.put < ch->remote_nentries)
+                return;
+
+        put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries);
         do {
                 msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
                                              (put % ch->remote_nentries) *
                                              ch->entry_size);
+                DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
+                DBUG_ON(!(msg->flags & XPC_M_SN2_DONE));
+                DBUG_ON(msg->number != put - ch->remote_nentries);
                 msg->flags = 0;
         } while (++put < ch_sn2->remote_GP.put);
 }
@@ -1836,6 +1842,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
                  */
                 xpc_clear_remote_msgqueue_flags_sn2(ch);
 
+                smp_wmb(); /* ensure flags have been cleared before bte_copy */
                 ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
 
                 dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
@@ -1934,7 +1941,7 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
                         break;
 
                 get = ch_sn2->w_local_GP.get;
-                rmb();  /* guarantee that .get loads before .put */
+                smp_rmb();      /* guarantee that .get loads before .put */
                 if (get == ch_sn2->w_remote_GP.put)
                         break;
 
@@ -1956,11 +1963,13 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
 
                         msg = xpc_pull_remote_msg_sn2(ch, get);
 
-                        DBUG_ON(msg != NULL && msg->number != get);
-                        DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
-                        DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+                        if (msg != NULL) {
+                                DBUG_ON(msg->number != get);
+                                DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+                                DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
 
-                        payload = &msg->payload;
+                                payload = &msg->payload;
+                        }
                         break;
                 }
 
@@ -2053,7 +2062,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags,
         while (1) {
 
                 put = ch_sn2->w_local_GP.put;
-                rmb();  /* guarantee that .put loads before .get */
+                smp_rmb();      /* guarantee that .put loads before .get */
                 if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
 
                         /* There are available message entries. We need to try
@@ -2186,7 +2195,7 @@ xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload,
          * The preceding store of msg->flags must occur before the following
          * load of local_GP->put.
          */
-        mb();
+        smp_mb();
 
         /* see if the message is next in line to be sent, if so send it */
 
@@ -2277,8 +2286,9 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
         dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
                 (void *)msg, msg_number, ch->partid, ch->number);
 
-        DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+        DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) !=
                 msg_number % ch->remote_nentries);
+        DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
         DBUG_ON(msg->flags & XPC_M_SN2_DONE);
 
         msg->flags |= XPC_M_SN2_DONE;
@@ -2287,7 +2297,7 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
          * The preceding store of msg->flags must occur before the following
          * load of local_GP->get.
          */
-        mb();
+        smp_mb();
 
         /*
          * See if this message is next in line to be acknowledged as having
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 91a55b1b1037..f17f7d40ea2c 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1423,7 +1423,7 @@ xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload,
                 atomic_inc(&ch->n_to_notify);
 
                 msg_slot->key = key;
-                wmb(); /* a non-NULL func must hit memory after the key */
+                smp_wmb(); /* a non-NULL func must hit memory after the key */
                 msg_slot->func = func;
 
                 if (ch->flags & XPC_C_DISCONNECTING) {
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 65929db29446..1f6eb2578717 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -676,7 +676,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 
         dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n",
                 chip->numchips);
-        dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n",
+        dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
                 chip->chipsize);
         dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
                 chip->pagemask);
@@ -703,7 +703,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
         dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
                 chip->ecc.layout);
         dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
-        dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size);
+        dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
         dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
                 mtd->erasesize);
         dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n",
@@ -932,8 +932,8 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 #endif
                 add_mtd_device(&priv->mtd);
 
-        printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n",
-               res.start, priv->bank);
+        printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
+               (unsigned long long)res.start, priv->bank);
         return 0;
 
 err:
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 9bd6c9ac8443..a8b9376cf324 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
         if (pasemi_nand_mtd)
                 return -ENODEV;
 
-        pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end);
+        pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end);
 
         /* Allocate memory for MTD device structure and private data */
         pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) +
@@ -170,7 +170,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
                 goto out_lpc;
         }
 
-        printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n",
+        printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n",
                res.start, lpcctl);
 
         return 0;
diff --git a/drivers/mtd/ubi/Kconfig.debug b/drivers/mtd/ubi/Kconfig.debug
index 1e2ee22edeff..2246f154e2f7 100644
--- a/drivers/mtd/ubi/Kconfig.debug
+++ b/drivers/mtd/ubi/Kconfig.debug
@@ -33,16 +33,6 @@ config MTD_UBI_DEBUG_DISABLE_BGT
           This option switches the background thread off by default. The thread
           may be also be enabled/disabled via UBI sysfs.
 
-config MTD_UBI_DEBUG_USERSPACE_IO
-        bool "Direct user-space write/erase support"
-        default n
-        depends on MTD_UBI_DEBUG
-        help
-          By default, users cannot directly write and erase individual
-          eraseblocks of dynamic volumes, and have to use update operation
-          instead. This option enables this capability - it is very useful for
-          debugging and testing.
-
 config MTD_UBI_DEBUG_EMULATE_BITFLIPS
         bool "Emulate flash bit-flips"
         depends on MTD_UBI_DEBUG
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 9082768cc6c3..4048db83aef6 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -263,8 +263,12 @@ static ssize_t dev_attribute_show(struct device *dev,
         return ret;
 }
 
-/* Fake "release" method for UBI devices */
-static void dev_release(struct device *dev) { }
+static void dev_release(struct device *dev)
+{
+        struct ubi_device *ubi = container_of(dev, struct ubi_device, dev);
+
+        kfree(ubi);
+}
 
 /**
  * ubi_sysfs_init - initialize sysfs for an UBI device.
@@ -380,7 +384,7 @@ static void free_user_volumes(struct ubi_device *ubi)
  */
 static int uif_init(struct ubi_device *ubi)
 {
-        int i, err, do_free = 0;
+        int i, err;
         dev_t dev;
 
         sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num);
@@ -427,13 +431,10 @@ static int uif_init(struct ubi_device *ubi)
 
 out_volumes:
         kill_volumes(ubi);
-        do_free = 0;
 out_sysfs:
         ubi_sysfs_close(ubi);
         cdev_del(&ubi->cdev);
 out_unreg:
-        if (do_free)
-                free_user_volumes(ubi);
         unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1);
         ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err);
         return err;
@@ -947,6 +948,12 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
         if (ubi->bgt_thread)
                 kthread_stop(ubi->bgt_thread);
 
+        /*
+         * Get a reference to the device in order to prevent 'dev_release()'
+         * from freeing @ubi object.
+         */
+        get_device(&ubi->dev);
+
         uif_close(ubi);
         ubi_wl_close(ubi);
         free_internal_volumes(ubi);
@@ -958,7 +965,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
         vfree(ubi->dbg_peb_buf);
 #endif
         ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num);
-        kfree(ubi);
+        put_device(&ubi->dev);
         return 0;
 }
 
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 98cf31ed0814..e63c8fc3df3a 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -40,9 +40,9 @@
 #include <linux/ioctl.h>
 #include <linux/capability.h>
 #include <linux/uaccess.h>
-#include <linux/smp_lock.h>
+#include <linux/compat.h>
+#include <linux/math64.h>
 #include <mtd/ubi-user.h>
-#include <asm/div64.h>
 #include "ubi.h"
 
 /**
@@ -195,7 +195,6 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
         int err, lnum, off, len,  tbuf_size;
         size_t count_save = count;
         void *tbuf;
-        uint64_t tmp;
 
         dbg_gen("read %zd bytes from offset %lld of volume %d",
                 count, *offp, vol->vol_id);
@@ -225,10 +224,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
                 return -ENOMEM;
 
         len = count > tbuf_size ? tbuf_size : count;
-
-        tmp = *offp;
-        off = do_div(tmp, vol->usable_leb_size);
-        lnum = tmp;
+        lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
 
         do {
                 cond_resched();
@@ -263,12 +259,9 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
         return err ? err : count_save - count;
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
-
 /*
  * This function allows to directly write to dynamic UBI volumes, without
- * issuing the volume update operation. Available only as a debugging feature.
- * Very useful for testing UBI.
+ * issuing the volume update operation.
  */
 static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
                                      size_t count, loff_t *offp)
@@ -279,7 +272,9 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
         int lnum, off, len, tbuf_size, err = 0;
         size_t count_save = count;
         char *tbuf;
-        uint64_t tmp;
+
+        if (!vol->direct_writes)
+                return -EPERM;
 
         dbg_gen("requested: write %zd bytes to offset %lld of volume %u",
                 count, *offp, vol->vol_id);
@@ -287,10 +282,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
         if (vol->vol_type == UBI_STATIC_VOLUME)
                 return -EROFS;
 
-        tmp = *offp;
-        off = do_div(tmp, vol->usable_leb_size);
-        lnum = tmp;
-
+        lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
         if (off & (ubi->min_io_size - 1)) {
                 dbg_err("unaligned position");
                 return -EINVAL;
@@ -347,10 +339,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
         return err ? err : count_save - count;
 }
 
-#else
-#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM)
-#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */
-
 static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
                               size_t count, loff_t *offp)
 {
@@ -402,8 +390,8 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
         return count;
 }
 
-static int vol_cdev_ioctl(struct inode *inode, struct file *file,
-                          unsigned int cmd, unsigned long arg)
+static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
+                           unsigned long arg)
 {
         int err = 0;
         struct ubi_volume_desc *desc = file->private_data;
@@ -487,7 +475,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
                 break;
         }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
         /* Logical eraseblock erasure command */
         case UBI_IOCEBER:
         {
@@ -518,13 +505,77 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
                 err = ubi_wl_flush(ubi);
                 break;
         }
-#endif
+
+        /* Logical eraseblock map command */
+        case UBI_IOCEBMAP:
+        {
+                struct ubi_map_req req;
+
+                err = copy_from_user(&req, argp, sizeof(struct ubi_map_req));
+                if (err) {
+                        err = -EFAULT;
+                        break;
+                }
+                err = ubi_leb_map(desc, req.lnum, req.dtype);
+                break;
+        }
+
+        /* Logical eraseblock un-map command */
+        case UBI_IOCEBUNMAP:
+        {
+                int32_t lnum;
+
+                err = get_user(lnum, (__user int32_t *)argp);
+                if (err) {
+                        err = -EFAULT;
+                        break;
+                }
+                err = ubi_leb_unmap(desc, lnum);
+                break;
+        }
+
+        /* Check if logical eraseblock is mapped command */
+        case UBI_IOCEBISMAP:
+        {
+                int32_t lnum;
+
+                err = get_user(lnum, (__user int32_t *)argp);
+                if (err) {
+                        err = -EFAULT;
+                        break;
+                }
+                err = ubi_is_mapped(desc, lnum);
+                break;
+        }
+
+        /* Set volume property command*/
+        case UBI_IOCSETPROP:
+        {
+                struct ubi_set_prop_req req;
+
+                err = copy_from_user(&req, argp,
+                                sizeof(struct ubi_set_prop_req));
+                if (err) {
+                        err = -EFAULT;
+                        break;
+                }
+                switch (req.property) {
+                case UBI_PROP_DIRECT_WRITE:
+                        mutex_lock(&ubi->volumes_mutex);
+                        desc->vol->direct_writes = !!req.value;
+                        mutex_unlock(&ubi->volumes_mutex);
+                        break;
+                default:
+                        err = -EINVAL;
+                        break;
+                }
+                break;
+        }
 
         default:
                 err = -ENOTTY;
                 break;
         }
-
         return err;
 }
 
@@ -762,8 +813,8 @@ out_free:
         return err;
 }
 
-static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
-                          unsigned int cmd, unsigned long arg)
+static long ubi_cdev_ioctl(struct file *file, unsigned int cmd,
+                           unsigned long arg)
 {
         int err = 0;
         struct ubi_device *ubi;
@@ -773,7 +824,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
         if (!capable(CAP_SYS_RESOURCE))
                 return -EPERM;
 
-        ubi = ubi_get_by_major(imajor(inode));
+        ubi = ubi_get_by_major(imajor(file->f_mapping->host));
         if (!ubi)
                 return -ENODEV;
 
@@ -843,7 +894,6 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
         case UBI_IOCRSVOL:
         {
                 int pebs;
-                uint64_t tmp;
                 struct ubi_rsvol_req req;
 
                 dbg_gen("re-size volume");
@@ -863,9 +913,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
                         break;
                 }
 
-                tmp = req.bytes;
-                pebs = !!do_div(tmp, desc->vol->usable_leb_size);
-                pebs += tmp;
+                pebs = div_u64(req.bytes + desc->vol->usable_leb_size - 1,
+                               desc->vol->usable_leb_size);
 
                 mutex_lock(&ubi->volumes_mutex);
                 err = ubi_resize_volume(desc, pebs);
@@ -909,8 +958,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
         return err;
 }
 
-static int ctrl_cdev_ioctl(struct inode *inode, struct file *file,
-                           unsigned int cmd, unsigned long arg)
+static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd,
+                            unsigned long arg)
 {
         int err = 0;
         void __user *argp = (void __user *)arg;
@@ -986,26 +1035,59 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file,
         return err;
 }
 
-/* UBI control character device operations */
-struct file_operations ubi_ctrl_cdev_operations = {
-        .ioctl = ctrl_cdev_ioctl,
-        .owner = THIS_MODULE,
+#ifdef CONFIG_COMPAT
+static long vol_cdev_compat_ioctl(struct file *file, unsigned int cmd,
+                                  unsigned long arg)
+{
+        unsigned long translated_arg = (unsigned long)compat_ptr(arg);
+
+        return vol_cdev_ioctl(file, cmd, translated_arg);
+}
+
+static long ubi_cdev_compat_ioctl(struct file *file, unsigned int cmd,
+                                  unsigned long arg)
+{
+        unsigned long translated_arg = (unsigned long)compat_ptr(arg);
+
+        return ubi_cdev_ioctl(file, cmd, translated_arg);
+}
+
+static long ctrl_cdev_compat_ioctl(struct file *file, unsigned int cmd,
+                                   unsigned long arg)
+{
+        unsigned long translated_arg = (unsigned long)compat_ptr(arg);
+
+        return ctrl_cdev_ioctl(file, cmd, translated_arg);
+}
+#else
+#define vol_cdev_compat_ioctl  NULL
+#define ubi_cdev_compat_ioctl  NULL
+#define ctrl_cdev_compat_ioctl NULL
+#endif
+
+/* UBI volume character device operations */
+const struct file_operations ubi_vol_cdev_operations = {
+        .owner          = THIS_MODULE,
+        .open           = vol_cdev_open,
+        .release        = vol_cdev_release,
+        .llseek         = vol_cdev_llseek,
+        .read           = vol_cdev_read,
+        .write          = vol_cdev_write,
+        .unlocked_ioctl = vol_cdev_ioctl,
+        .compat_ioctl   = vol_cdev_compat_ioctl,
 };
 
 /* UBI character device operations */
-struct file_operations ubi_cdev_operations = {
-        .owner = THIS_MODULE,
-        .ioctl = ubi_cdev_ioctl,
-        .llseek = no_llseek,
+const struct file_operations ubi_cdev_operations = {
+        .owner          = THIS_MODULE,
+        .llseek         = no_llseek,
+        .unlocked_ioctl = ubi_cdev_ioctl,
+        .compat_ioctl   = ubi_cdev_compat_ioctl,
 };
 
-/* UBI volume character device operations */
-struct file_operations ubi_vol_cdev_operations = {
-        .owner   = THIS_MODULE,
-        .open    = vol_cdev_open,
-        .release = vol_cdev_release,
-        .llseek  = vol_cdev_llseek,
-        .read    = vol_cdev_read,
-        .write   = vol_cdev_write,
-        .ioctl   = vol_cdev_ioctl,
+/* UBI control character device operations */
+const struct file_operations ubi_ctrl_cdev_operations = {
+        .owner          = THIS_MODULE,
+        .unlocked_ioctl = ctrl_cdev_ioctl,
+        .compat_ioctl   = ctrl_cdev_compat_ioctl,
 };
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 6dd4f5e77f82..49cd55ade9c8 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -28,7 +28,7 @@
  * eraseblock size is equivalent to the logical eraseblock size of the volume.
  */
 
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include "ubi.h"
 
 /**
@@ -109,7 +109,6 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
         int err = 0, lnum, offs, total_read;
         struct ubi_volume *vol;
         struct ubi_device *ubi;
-        uint64_t tmp = from;
 
         dbg_gen("read %zd bytes from offset %lld", len, from);
 
@@ -119,9 +118,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
         vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
         ubi = vol->ubi;
 
-        offs = do_div(tmp, mtd->erasesize);
-        lnum = tmp;
-
+        lnum = div_u64_rem(from, mtd->erasesize, &offs);
         total_read = len;
         while (total_read) {
                 size_t to_read = mtd->erasesize - offs;
@@ -160,7 +157,6 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
         int err = 0, lnum, offs, total_written;
         struct ubi_volume *vol;
         struct ubi_device *ubi;
-        uint64_t tmp = to;
 
         dbg_gen("write %zd bytes to offset %lld", len, to);
 
@@ -173,8 +169,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
         if (ubi->ro_mode)
                 return -EROFS;
 
-        offs = do_div(tmp, mtd->erasesize);
-        lnum = tmp;
+        lnum = div_u64_rem(to, mtd->erasesize, &offs);
 
         if (len % mtd->writesize || offs % mtd->writesize)
                 return -EINVAL;
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index ecde202a5a12..c3d653ba5ca0 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -42,7 +42,7 @@
 
 #include <linux/err.h>
 #include <linux/crc32.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include "ubi.h"
 
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
@@ -904,10 +904,8 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
         dbg_msg("scanning is finished");
 
         /* Calculate mean erase counter */
-        if (si->ec_count) {
-                do_div(si->ec_sum, si->ec_count);
-                si->mean_ec = si->ec_sum;
-        }
+        if (si->ec_count)
+                si->mean_ec = div_u64(si->ec_sum, si->ec_count);
 
         if (si->is_empty)
                 ubi_msg("empty MTD device detected");
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 4a8ec485c91d..c055511bb1b2 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -206,6 +206,7 @@ struct ubi_volume_desc;
  * @upd_marker: %1 if the update marker is set for this volume
  * @updating: %1 if the volume is being updated
  * @changing_leb: %1 if the atomic LEB change ioctl command is in progress
+ * @direct_writes: %1 if direct writes are enabled for this volume
  *
  * @gluebi_desc: gluebi UBI volume descriptor
  * @gluebi_refcount: reference count of the gluebi MTD device
@@ -253,6 +254,7 @@ struct ubi_volume {
         unsigned int upd_marker:1;
         unsigned int updating:1;
         unsigned int changing_leb:1;
+        unsigned int direct_writes:1;
 
 #ifdef CONFIG_MTD_UBI_GLUEBI
         /*
@@ -304,7 +306,8 @@ struct ubi_wl_entry;
  * @vtbl_size: size of the volume table in bytes
  * @vtbl: in-RAM volume table copy
  * @volumes_mutex: protects on-flash volume table and serializes volume
- *                 changes, like creation, deletion, update, re-size and re-name
+ *                 changes, like creation, deletion, update, re-size,
+ *                 re-name and set property
  *
  * @max_ec: current highest erase counter value
  * @mean_ec: current mean erase counter value
@@ -449,9 +452,9 @@ struct ubi_device {
 };
 
 extern struct kmem_cache *ubi_wl_entry_slab;
-extern struct file_operations ubi_ctrl_cdev_operations;
-extern struct file_operations ubi_cdev_operations;
-extern struct file_operations ubi_vol_cdev_operations;
+extern const struct file_operations ubi_ctrl_cdev_operations;
+extern const struct file_operations ubi_cdev_operations;
+extern const struct file_operations ubi_vol_cdev_operations;
 extern struct class *ubi_class;
 extern struct mutex ubi_devices_mutex;
 
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index 8b89cc18ff0b..6b4d1ae891ae 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -40,7 +40,7 @@
 
 #include <linux/err.h>
 #include <linux/uaccess.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include "ubi.h"
 
 /**
@@ -89,7 +89,6 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
                                long long bytes)
 {
         int err;
-        uint64_t tmp;
         struct ubi_vtbl_record vtbl_rec;
 
         dbg_gen("clear update marker for volume %d", vol->vol_id);
@@ -101,9 +100,9 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
 
         if (vol->vol_type == UBI_STATIC_VOLUME) {
                 vol->corrupted = 0;
-                vol->used_bytes = tmp = bytes;
-                vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size);
-                vol->used_ebs = tmp;
+                vol->used_bytes = bytes;
+                vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size,
+                                            &vol->last_eb_bytes);
                 if (vol->last_eb_bytes)
                         vol->used_ebs += 1;
                 else
@@ -131,7 +130,6 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
                      long long bytes)
 {
         int i, err;
-        uint64_t tmp;
 
         dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes);
         ubi_assert(!vol->updating && !vol->changing_leb);
@@ -161,9 +159,8 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
         if (!vol->upd_buf)
                 return -ENOMEM;
 
-        tmp = bytes;
-        vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size);
-        vol->upd_ebs += tmp;
+        vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1,
+                               vol->usable_leb_size);
         vol->upd_bytes = bytes;
         vol->upd_received = 0;
         return 0;
@@ -282,7 +279,6 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
                          const void __user *buf, int count)
 {
-        uint64_t tmp;
         int lnum, offs, err = 0, len, to_write = count;
 
         dbg_gen("write %d of %lld bytes, %lld already passed",
@@ -291,10 +287,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
         if (ubi->ro_mode)
                 return -EROFS;
 
-        tmp = vol->upd_received;
-        offs = do_div(tmp, vol->usable_leb_size);
-        lnum = tmp;
-
+        lnum = div_u64_rem(vol->upd_received,  vol->usable_leb_size, &offs);
         if (vol->upd_received + count > vol->upd_bytes)
                 to_write = count = vol->upd_bytes - vol->upd_received;
 
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 22e1d7398fce..df5483562b7a 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -24,7 +24,7 @@
  */
 
 #include <linux/err.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include "ubi.h"
 
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
@@ -205,7 +205,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
         int i, err, vol_id = req->vol_id, do_free = 1;
         struct ubi_volume *vol;
         struct ubi_vtbl_record vtbl_rec;
-        uint64_t bytes;
         dev_t dev;
 
         if (ubi->ro_mode)
@@ -255,10 +254,8 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 
         /* Calculate how many eraseblocks are requested */
         vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment;
-        bytes = req->bytes;
-        if (do_div(bytes, vol->usable_leb_size))
-                vol->reserved_pebs = 1;
-        vol->reserved_pebs += bytes;
+        vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1,
+                                      vol->usable_leb_size);
 
         /* Reserve physical eraseblocks */
         if (vol->reserved_pebs > ubi->avail_pebs) {
@@ -301,10 +298,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
                 vol->used_bytes =
                         (long long)vol->used_ebs * vol->usable_leb_size;
         } else {
-                bytes = vol->used_bytes;
-                vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size);
-                vol->used_ebs = bytes;
-                if (vol->last_eb_bytes)
+                vol->used_ebs = div_u64_rem(vol->used_bytes,
+                                            vol->usable_leb_size,
+                                            &vol->last_eb_bytes);
+                if (vol->last_eb_bytes != 0)
                         vol->used_ebs += 1;
                 else
                         vol->last_eb_bytes = vol->usable_leb_size;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9fe8cb7d43ac..6bdfd47d679d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1829,7 +1829,7 @@ config 68360_ENET
 
 config FEC
         bool "FEC ethernet controller (of ColdFire CPUs)"
-        depends on M523x || M527x || M5272 || M528x || M520x
+        depends on M523x || M527x || M5272 || M528x || M520x || M532x
         help
           Say Y here if you want to use the built-in 10/100 Fast ethernet
           controller on some Motorola ColdFire processors.
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 7e33c129d51c..2769083bfe83 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1698,7 +1698,7 @@ static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_priva
         /*
          * Set MII speed to 2.5 MHz
          */
-        fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+        fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2;
         fecp->fec_mii_speed = fep->phy_speed;
 
         fec_restart(dev, 0);
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 3fac8f81d59d..a70cf16ee1ad 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
  * @dev: instance of PCI owned by the driver that's asking
  * @mask:  number of address bits this PCI device can handle
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static int sba_dma_supported( struct device *dev, u64 mask)
 {
@@ -680,8 +680,8 @@ static int sba_dma_supported( struct device *dev, u64 mask)
                 return(0);
         }
 
-        /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
-         * then fall back to 32-bit if that fails.
+        /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit
+         * first, then fall back to 32-bit if that fails.
          * We are just "encouraging" 32-bit DMA masks here since we can
          * never allow IOMMU bypass unless we add special support for ZX1.
          */
@@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
  * @size:  number of bytes to map in driver buffer.
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static dma_addr_t
 sba_map_single(struct device *dev, void *addr, size_t size,
@@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size,
  * @size:  number of bytes mapped in driver buffer.
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static void
 sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
@@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
  * @size:  number of bytes mapped in driver buffer.
  * @dma_handle:  IOVA of new buffer.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static void *sba_alloc_consistent(struct device *hwdev, size_t size,
                                         dma_addr_t *dma_handle, gfp_t gfp)
@@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size,
  * @vaddr:  virtual address IOVA of "consistent" buffer.
  * @dma_handler:  IO virtual address of "consistent" buffer.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static void
 sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
@@ -927,7 +927,7 @@ int dump_run_sg = 0;
  * @nents:  number of entries in list
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static int
 sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
@@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
  * @nents:  number of entries in list
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-mapping.txt
+ * See Documentation/PCI/PCI-DMA-mapping.txt
  */
 static void 
 sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 7c789f0a94d7..de91ddab0a86 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -382,6 +382,11 @@ static int __init hp_wmi_input_setup(void)
                 case KE_SW:
                         set_bit(EV_SW, hp_wmi_input_dev->evbit);
                         set_bit(key->keycode, hp_wmi_input_dev->swbit);
+
+                        /* Set initial dock state */
+                        input_report_switch(hp_wmi_input_dev, key->keycode,
+                                            hp_wmi_dock_state());
+                        input_sync(hp_wmi_input_dev);
                         break;
                 }
         }
@@ -441,6 +446,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
                 bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
                 bluetooth_rfkill->user_claim_unsupported = 1;
                 err = rfkill_register(bluetooth_rfkill);
+                if (err)
                         goto register_bluetooth_error;
         }
 
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 91ef669d98f6..a1a511bdec8c 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1322,7 +1322,9 @@ static int ibmvfc_map_sg_data(struct scsi_cmnd *scmd,
                                                &evt->ext_list_token);
 
                 if (!evt->ext_list) {
-                        scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
+                        scsi_dma_unmap(scmd);
+                        if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
+                                scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
                         return -ENOMEM;
                 }
         }
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 7225b6e2029e..257c24115de9 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1981,6 +1981,7 @@ void iscsi_pool_free(struct iscsi_pool *q)
                 kfree(q->pool[i]);
         if (q->pool)
                 kfree(q->pool);
+        kfree(q->queue);
 }
 EXPORT_SYMBOL_GPL(iscsi_pool_free);
 
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index c7acef50d5da..33a3c13fd893 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1016,6 +1016,9 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
         struct Scsi_Host *host = rport_to_shost(rport);
         fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+        if (!fcport)
+                return;
+
         qla2x00_abort_fcport_cmds(fcport);
 
         /*
@@ -1033,6 +1036,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 {
         fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+        if (!fcport)
+                return;
+
         /*
          * At this point all fcport's software-states are cleared.  Perform any
          * final cleanup of firmware resources (PCBs and XCBs).
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index ba4913353752..a336b4bc81a7 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -34,6 +34,7 @@ extern void qla24xx_update_fw_options(scsi_qla_host_t *);
 extern void qla81xx_update_fw_options(scsi_qla_host_t *);
 extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
 extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
+extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
 
 extern int qla2x00_loop_resync(scsi_qla_host_t *);
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9ad4d0968e5c..f6368a1d3021 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3562,6 +3562,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha)
         WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
         RD_REG_DWORD(&reg->hccr);
         spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+        if (IS_NOPOLLING_TYPE(ha))
+                ha->isp_ops->enable_intrs(ha);
 }
 
 /* On sparc systems, obtain port and node WWN from firmware
@@ -3847,6 +3850,10 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
         uint32_t i;
         struct qla_hw_data *ha = vha->hw;
         struct req_que *req = ha->req_q_map[0];
+
+        qla_printk(KERN_INFO, ha,
+            "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+
         rval = QLA_SUCCESS;
 
         segments = FA_RISC_CODE_SEGMENTS;
@@ -4022,8 +4029,8 @@ fail_fw_integrity:
         return QLA_FUNCTION_FAILED;
 }
 
-int
-qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+static int
+qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
         int     rval;
         int     segments, fragment;
@@ -4043,12 +4050,12 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
                 qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
                     "from: " QLA_FW_URL ".\n");
 
-                /* Try to load RISC code from flash. */
-                qla_printk(KERN_ERR, ha, "Attempting to load (potentially "
-                    "outdated) firmware from flash.\n");
-                return qla24xx_load_risc_flash(vha, srisc_addr);
+                return QLA_FUNCTION_FAILED;
         }
 
+        qla_printk(KERN_INFO, ha,
+            "FW: Loading via request-firmware...\n");
+
         rval = QLA_SUCCESS;
 
         segments = FA_RISC_CODE_SEGMENTS;
@@ -4133,6 +4140,40 @@ fail_fw_integrity:
         return QLA_FUNCTION_FAILED;
 }
 
+int
+qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+        int rval;
+
+        /*
+         * FW Load priority:
+         * 1) Firmware via request-firmware interface (.bin file).
+         * 2) Firmware residing in flash.
+         */
+        rval = qla24xx_load_risc_blob(vha, srisc_addr);
+        if (rval == QLA_SUCCESS)
+                return rval;
+
+        return qla24xx_load_risc_flash(vha, srisc_addr);
+}
+
+int
+qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+        int rval;
+
+        /*
+         * FW Load priority:
+         * 1) Firmware residing in flash.
+         * 2) Firmware via request-firmware interface (.bin file).
+         */
+        rval = qla24xx_load_risc_flash(vha, srisc_addr);
+        if (rval == QLA_SUCCESS)
+                return rval;
+
+        return qla24xx_load_risc_blob(vha, srisc_addr);
+}
+
 void
 qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
 {
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 789fc576f222..e28ad81baf1e 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1868,6 +1868,7 @@ qla24xx_disable_msix(struct qla_hw_data *ha)
 static int
 qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 {
+#define MIN_MSIX_COUNT  2
         int i, ret;
         struct msix_entry *entries;
         struct qla_msix_entry *qentry;
@@ -1883,12 +1884,16 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 
         ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
         if (ret) {
+                if (ret < MIN_MSIX_COUNT)
+                        goto msix_failed;
+
                 qla_printk(KERN_WARNING, ha,
                         "MSI-X: Failed to enable support -- %d/%d\n"
                         " Retry with %d vectors\n", ha->msix_count, ret, ret);
                 ha->msix_count = ret;
                 ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
                 if (ret) {
+msix_failed:
                         qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable"
                                 " support, giving up -- %d/%d\n",
                                 ha->msix_count, ret);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index db4df45234a5..f94ffbb98e95 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -58,14 +58,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
          * seconds. This is to serialize actual issuing of mailbox cmds during
          * non ISP abort time.
          */
-        if (!abort_active) {
-                if (!wait_for_completion_timeout(&ha->mbx_cmd_comp,
-                    mcp->tov * HZ)) {
-                        /* Timeout occurred. Return error. */
-                        DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
-                            "Exiting.\n", __func__, base_vha->host_no));
-                        return QLA_FUNCTION_TIMEOUT;
-                }
+        if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) {
+                /* Timeout occurred. Return error. */
+                DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
+                    "Exiting.\n", __func__, base_vha->host_no));
+                return QLA_FUNCTION_TIMEOUT;
         }
 
         ha->flags.mbox_busy = 1;
@@ -265,8 +262,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
         }
 
         /* Allow next mbx cmd to come in. */
-        if (!abort_active)
-                complete(&ha->mbx_cmd_comp);
+        complete(&ha->mbx_cmd_comp);
 
         if (rval) {
                 DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index cf32653fe01a..c11f872d3e10 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -65,8 +65,6 @@ MODULE_PARM_DESC(ql2xextended_error_logging,
 
 static void qla2x00_free_device(scsi_qla_host_t *);
 
-static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
-
 int ql2xfdmienable=1;
 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xfdmienable,
@@ -800,6 +798,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
                 if (ha->isp_ops->abort_command(vha, sp, req)) {
                         DEBUG2(printk("%s(%ld): abort_command "
                         "mbx failed.\n", __func__, vha->host_no));
+                        ret = FAILED;
                 } else {
                         DEBUG3(printk("%s(%ld): abort_command "
                         "mbx success.\n", __func__, vha->host_no));
@@ -1241,9 +1240,8 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
  * supported addressing method.
  */
 static void
-qla2x00_config_dma_addressing(scsi_qla_host_t *vha)
+qla2x00_config_dma_addressing(struct qla_hw_data *ha)
 {
-        struct qla_hw_data *ha = vha->hw;
         /* Assume a 32bit DMA mask. */
         ha->flags.enable_64bit_addressing = 0;
 
@@ -1480,7 +1478,7 @@ static struct isp_operations qla81xx_isp_ops = {
         .reset_adapter          = qla24xx_reset_adapter,
         .nvram_config           = qla81xx_nvram_config,
         .update_fw_options      = qla81xx_update_fw_options,
-        .load_risc              = qla24xx_load_risc,
+        .load_risc              = qla81xx_load_risc,
         .pci_info_str           = qla24xx_pci_info_str,
         .fw_version_str         = qla24xx_fw_version_str,
         .intr_handler           = qla24xx_intr_handler,
@@ -1869,6 +1867,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
         set_bit(0, (unsigned long *) ha->vp_idx_map);
 
+        qla2x00_config_dma_addressing(ha);
         ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
         if (!ret) {
                 qla_printk(KERN_WARNING, ha,
@@ -1888,13 +1887,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
                     "[ERROR] Failed to allocate memory for scsi_host\n");
 
                 ret = -ENOMEM;
+                qla2x00_mem_free(ha);
+                qla2x00_free_que(ha, req, rsp);
                 goto probe_hw_failed;
         }
 
         pci_set_drvdata(pdev, base_vha);
 
-        qla2x00_config_dma_addressing(base_vha);
-
         host = base_vha->host;
         base_vha->req_ques[0] = req->id;
         host->can_queue = req->length + 128;
@@ -1917,14 +1916,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* Set up the irqs */
         ret = qla2x00_request_irqs(ha, rsp);
         if (ret)
-                goto probe_failed;
-
+                goto probe_init_failed;
         /* Alloc arrays of request and response ring ptrs */
         if (!qla2x00_alloc_queues(ha)) {
                 qla_printk(KERN_WARNING, ha,
                 "[ERROR] Failed to allocate memory for queue"
                 " pointers\n");
-                goto probe_failed;
+                goto probe_init_failed;
         }
         ha->rsp_q_map[0] = rsp;
         ha->req_q_map[0] = req;
@@ -1997,6 +1995,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
         return 0;
 
+probe_init_failed:
+        qla2x00_free_que(ha, req, rsp);
+        ha->max_queues = 0;
+
 probe_failed:
         qla2x00_free_device(base_vha);
 
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 303f8ee11f25..9c3b694c049d 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -944,9 +944,9 @@ qla24xx_unprotect_flash(struct qla_hw_data *ha)
         if (!ha->fdt_wrt_disable)
                 return;
 
-        /* Disable flash write-protection. */
+        /* Disable flash write-protection, first clear SR protection bit */
         qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
-        /* Some flash parts need an additional zero-write to clear bits.*/
+        /* Then write zero again to clear remaining SR bits.*/
         qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
 }
 
@@ -980,12 +980,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
     uint32_t dwords)
 {
         int ret;
-        uint32_t liter, miter;
+        uint32_t liter;
         uint32_t sec_mask, rest_addr;
-        uint32_t fdata, findex;
+        uint32_t fdata;
         dma_addr_t optrom_dma;
         void *optrom = NULL;
-        uint32_t *s, *d;
         struct qla_hw_data *ha = vha->hw;
 
         ret = QLA_SUCCESS;
@@ -1003,17 +1002,15 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
         }
 
         rest_addr = (ha->fdt_block_size >> 2) - 1;
-        sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2);
+        sec_mask = ~rest_addr;
 
         qla24xx_unprotect_flash(ha);
 
         for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
-
-                findex = faddr;
-                fdata = (findex & sec_mask) << 2;
+                fdata = (faddr & sec_mask) << 2;
 
                 /* Are we at the beginning of a sector? */
-                if ((findex & rest_addr) == 0) {
+                if ((faddr & rest_addr) == 0) {
                         /* Do sector unprotect. */
                         if (ha->fdt_unprotect_sec_cmd)
                                 qla24xx_write_flash_dword(ha,
@@ -1024,7 +1021,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
                             (fdata & 0xff00) |((fdata << 16) &
                             0xff0000) | ((fdata >> 16) & 0xff));
                         if (ret != QLA_SUCCESS) {
-                                DEBUG9(qla_printk("Unable to flash sector: "
+                                DEBUG9(qla_printk("Unable to erase sector: "
                                     "address=%x.\n", faddr));
                                 break;
                         }
@@ -1033,9 +1030,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
                 /* Go with burst-write. */
                 if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
                         /* Copy data to DMA'ble buffer. */
-                        for (miter = 0, s = optrom, d = dwptr;
-                            miter < OPTROM_BURST_DWORDS; miter++, s++, d++)
-                                *s = cpu_to_le32(*d);
+                        memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
 
                         ret = qla2x00_load_ram(vha, optrom_dma,
                             flash_data_addr(ha, faddr),
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 808bab6ef06b..cfa4c11a4797 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.00-k1"
+#define QLA2XXX_VERSION      "8.03.00-k2"
 
 #define QLA_DRIVER_MAJOR_VER    8
 #define QLA_DRIVER_MINOR_VER    3
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index d6be0762eb91..b586f27c3bd4 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -244,6 +244,7 @@ struct ddb_entry {
         uint8_t ip_addr[ISCSI_IPADDR_SIZE];
         uint8_t iscsi_name[ISCSI_NAME_SIZE];    /* 72 x48 */
         uint8_t iscsi_alias[0x20];
+        uint8_t isid[6];
 };
 
 /*
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 109c5f5985ec..af8c3233e8ae 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -342,8 +342,12 @@ static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha,
         DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no,
                       __func__, fw_ddb_index));
         list_for_each_entry(ddb_entry, &ha->ddb_list, list) {
-                if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
-                           ISCSI_NAME_SIZE) == 0) {
+                if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
+                           ISCSI_NAME_SIZE) == 0) &&
+                        (ddb_entry->tpgt ==
+                                le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) &&
+                        (memcmp(ddb_entry->isid, fw_ddb_entry->isid,
+                                sizeof(ddb_entry->isid)) == 0)) {
                         found++;
                         break;
                 }
@@ -430,6 +434,8 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 
         ddb_entry->port = le16_to_cpu(fw_ddb_entry->port);
         ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
+        memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid));
+
         memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0],
                min(sizeof(ddb_entry->iscsi_name),
                    sizeof(fw_ddb_entry->iscsi_name)));
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 2a3671233b15..536d8e510f66 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -806,6 +806,8 @@ pci_default_setup(struct serial_private *priv,
 #define PCI_SUBDEVICE_ID_OCTPRO422      0x0208
 #define PCI_SUBDEVICE_ID_POCTAL232      0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422      0x0408
+#define PCI_VENDOR_ID_ADVANTECH         0x13fe
+#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -2152,6 +2154,10 @@ static int pciserial_resume_one(struct pci_dev *dev)
 #endif
 
 static struct pci_device_id serial_pci_tbl[] = {
+        /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
+        {       PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+                PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
+                pbn_b2_8_921600 },
         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
                 PCI_SUBVENDOR_ID_CONNECT_TECH,
                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3e525e38a5d9..7d7f576da202 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -982,7 +982,7 @@ config SERIAL_SH_SCI_CONSOLE
 
 config SERIAL_PNX8XXX
         bool "Enable PNX8XXX SoCs' UART Support"
-        depends on MIPS && SOC_PNX8550
+        depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
         select SERIAL_CORE
         help
           If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 338cf8a08b43..92187e28608a 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -180,7 +180,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         return rc;
 }
 
-static void jsm_remove_one(struct pci_dev *pdev)
+static void __devexit jsm_remove_one(struct pci_dev *pdev)
 {
         struct jsm_board *brd = pci_get_drvdata(pdev);
         int i = 0;
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index b2001c5b145c..56841fe5f483 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -212,10 +212,18 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
 {
         unsigned long flags;
         unsigned int baud, baudclk;
+#if defined(CONFIG_M5272)
+        unsigned int baudfr;
+#endif
         unsigned char mr1, mr2;
 
         baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+#if defined(CONFIG_M5272)
+        baudclk = (MCF_BUSCLK / baud) / 32;
+        baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16;
+#else
         baudclk = ((MCF_BUSCLK / baud) + 16) / 32;
+#endif
 
         mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
         mr2 = 0;
@@ -262,6 +270,9 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
         writeb(mr2, port->membase + MCFUART_UMR);
         writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1);
         writeb((baudclk & 0xff), port->membase + MCFUART_UBG2);
+#if defined(CONFIG_M5272)
+        writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD);
+#endif
         writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER,
                 port->membase + MCFUART_UCSR);
         writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
diff --git a/drivers/staging/agnx/agnx.h b/drivers/staging/agnx/agnx.h
index a75b0db3726c..20f36da62475 100644
--- a/drivers/staging/agnx/agnx.h
+++ b/drivers/staging/agnx/agnx.h
@@ -1,6 +1,8 @@
 #ifndef AGNX_H_
 #define AGNX_H_
 
+#include <linux/io.h>
+
 #include "xmit.h"
 
 #define PFX                             KBUILD_MODNAME ": "
diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c
index 8e2b4ca0651d..f516140ca976 100644
--- a/drivers/staging/altpciechdma/altpciechdma.c
+++ b/drivers/staging/altpciechdma/altpciechdma.c
@@ -531,7 +531,7 @@ static int __devinit dma_test(struct ape_dev *ape, struct pci_dev *dev)
         goto fail;
 
         /* allocate and map coherently-cached memory for a DMA-able buffer */
-        /* @see 2.6.26.2/Documentation/DMA-mapping.txt line 318 */
+        /* @see Documentation/PCI/PCI-DMA-mapping.txt, near line 318 */
         buffer_virt = (u8 *)pci_alloc_consistent(dev, PAGE_SIZE * 4, &buffer_bus);
         if (!buffer_virt) {
                 printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n");
@@ -846,7 +846,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 #if 1 // @todo For now, disable 64-bit, because I do not understand the implications (DAC!)
         /* query for DMA transfer */
-        /* @see Documentation/DMA-mapping.txt */
+        /* @see Documentation/PCI/PCI-DMA-mapping.txt */
         if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)) {
                 pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK);
                 /* use 64-bit DMA */
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 6a4ceacb33f5..758131cad08a 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -319,6 +319,7 @@ int task_get_unused_fd_flags(struct task_struct *tsk, int flags)
         int fd, error;
         struct fdtable *fdt;
         unsigned long rlim_cur;
+        unsigned long irqs;
 
         if (files == NULL)
                 return -ESRCH;
@@ -335,12 +336,11 @@ repeat:
          * N.B. For clone tasks sharing a files structure, this test
          * will limit the total number of files that can be opened.
          */
-        rcu_read_lock();
-        if (tsk->signal)
+        rlim_cur = 0;
+        if (lock_task_sighand(tsk, &irqs)) {
                 rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-        else
-                rlim_cur = 0;
-        rcu_read_unlock();
+                unlock_task_sighand(tsk, &irqs);
+        }
         if (fd >= rlim_cur)
                 goto out;
 
@@ -2649,14 +2649,14 @@ static void binder_vma_open(struct vm_area_struct *vma)
 {
         struct binder_proc *proc = vma->vm_private_data;
         if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
-                printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+                printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
         dump_stack();
 }
 static void binder_vma_close(struct vm_area_struct *vma)
 {
         struct binder_proc *proc = vma->vm_private_data;
         if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
-                printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+                printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
         proc->vma = NULL;
 }
 
@@ -2677,7 +2677,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
                 vma->vm_end = vma->vm_start + SZ_4M;
 
         if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
-                printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+                printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
 
         if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) {
                 ret = -EPERM;
diff --git a/drivers/staging/android/lowmemorykiller.txt b/drivers/staging/android/lowmemorykiller.txt
new file mode 100644
index 000000000000..bd5c0c028968
--- /dev/null
+++ b/drivers/staging/android/lowmemorykiller.txt
@@ -0,0 +1,16 @@
+The lowmemorykiller driver lets user-space specify a set of memory thresholds
+where processes with a range of oom_adj values will get killed. Specify the
+minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the
+number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both
+files take a comma separated list of numbers in ascending order.
+
+For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and
+"1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes
+with a oom_adj value of 8 or higher when the free memory drops below 4096 pages
+and kill processes with a oom_adj value of 0 or higher when the free memory
+drops below 1024 pages.
+
+The driver considers memory used for caches to be free, but if a large
+percentage of the cached memory is locked this can be very inaccurate
+and processes may not get killed until the normal oom killer is triggered.
+
diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c
index bea68c9fc942..903270cbbe02 100644
--- a/drivers/staging/android/timed_gpio.c
+++ b/drivers/staging/android/timed_gpio.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/hrtimer.h>
 #include <linux/err.h>
-#include <asm/arch/gpio.h>
+#include <linux/gpio.h>
 
 #include "timed_gpio.h"
 
@@ -49,7 +49,8 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att
 
         if (hrtimer_active(&gpio_data->timer)) {
                 ktime_t r = hrtimer_get_remaining(&gpio_data->timer);
-                remaining = r.tv.sec * 1000 + r.tv.nsec / 1000000;
+                struct timeval t = ktime_to_timeval(r);
+                remaining = t.tv_sec * 1000 + t.tv_usec;
         } else
                 remaining = 0;
 
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index b501bfb9c754..b47ca1e7e383 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -1,6 +1,7 @@
 config COMEDI
         tristate "Data Acquision support (comedi)"
         default N
+        depends on m
         ---help---
           Enable support a wide range of data acquision devices
           for Linux.
diff --git a/drivers/staging/meilhaus/Kconfig b/drivers/staging/meilhaus/Kconfig
index 6def83fa2c96..923af22a4686 100644
--- a/drivers/staging/meilhaus/Kconfig
+++ b/drivers/staging/meilhaus/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig MEILHAUS
         tristate "Meilhaus support"
+        depends on m
         ---help---
           If you have a Meilhaus card, say Y (or M) here.
 
@@ -18,7 +19,7 @@ if MEILHAUS
 config ME0600
         tristate "Meilhaus ME-600 support"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This driver supports the Meilhaus ME-600 family of boards
           that do data collection and multipurpose I/O.
@@ -29,7 +30,7 @@ config ME0600
 config ME0900
         tristate "Meilhaus ME-900 support"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This driver supports the Meilhaus ME-900 family of boards
           that do data collection and multipurpose I/O.
@@ -40,7 +41,7 @@ config ME0900
 config ME1000
         tristate "Meilhaus ME-1000 support"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This driver supports the Meilhaus ME-1000 family of boards
           that do data collection and multipurpose I/O.
@@ -51,7 +52,7 @@ config ME1000
 config ME1400
         tristate "Meilhaus ME-1400 support"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This driver supports the Meilhaus ME-1400 family of boards
           that do data collection and multipurpose I/O.
@@ -62,7 +63,7 @@ config ME1400
 config ME1600
         tristate "Meilhaus ME-1600 support"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This driver supports the Meilhaus ME-1600 family of boards
           that do data collection and multipurpose I/O.
@@ -73,7 +74,7 @@ config ME1600
 config ME4600
         tristate "Meilhaus ME-4600 support"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This driver supports the Meilhaus ME-4600 family of boards
           that do data collection and multipurpose I/O.
@@ -84,7 +85,7 @@ config ME4600
 config ME6000
         tristate "Meilhaus ME-6000 support"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This driver supports the Meilhaus ME-6000 family of boards
           that do data collection and multipurpose I/O.
@@ -95,7 +96,7 @@ config ME6000
 config ME8100
         tristate "Meilhaus ME-8100 support"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This driver supports the Meilhaus ME-8100 family of boards
           that do data collection and multipurpose I/O.
@@ -106,7 +107,7 @@ config ME8100
 config ME8200
         tristate "Meilhaus ME-8200 support"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This driver supports the Meilhaus ME-8200 family of boards
           that do data collection and multipurpose I/O.
@@ -117,7 +118,7 @@ config ME8200
 config MEDUMMY
         tristate "Meilhaus dummy driver"
         default n
-        depends on PCI
+        depends on PCI && m
         help
           This provides a dummy driver for the Meilhaus driver package
 
diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c
index ec343ef53a85..0d111ddfabb2 100644
--- a/drivers/staging/poch/poch.c
+++ b/drivers/staging/poch/poch.c
@@ -1026,7 +1026,7 @@ static int poch_ioctl(struct inode *inode, struct file *filp,
                 }
                 break;
         case POCH_IOC_GET_COUNTERS:
-                if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters)))
+                if (!access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters)))
                         return -EFAULT;
 
                 spin_lock_irq(&channel->counters_lock);
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 72e209276ea7..22f93dd0ba03 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -406,8 +406,20 @@ void usbip_start_threads(struct usbip_device *ud)
         /*
          * threads are invoked per one device (per one connection).
          */
-        kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0);
-        kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0);
+        int retval;
+
+        retval = kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0);
+        if (retval < 0) {
+                printk(KERN_ERR "Creating tcp_rx thread for ud %p failed.\n",
+                                ud);
+                return;
+        }
+        retval = kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0);
+        if (retval < 0) {
+                printk(KERN_ERR "Creating tcp_tx thread for ud %p failed.\n",
+                                ud);
+                return;
+        }
 
         /* confirm threads are starting */
         wait_for_completion(&ud->tcp_rx.thread_done);
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 8b7c419b876e..8bcde8cde554 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_USB_EHCI_HCD)	+= host/
 obj-$(CONFIG_USB_ISP116X_HCD)   += host/
 obj-$(CONFIG_USB_OHCI_HCD)      += host/
 obj-$(CONFIG_USB_UHCI_HCD)      += host/
+obj-$(CONFIG_USB_FHCI_HCD)      += host/
 obj-$(CONFIG_USB_SL811_HCD)     += host/
 obj-$(CONFIG_USB_U132_HCD)      += host/
 obj-$(CONFIG_USB_R8A66597_HCD)  += host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 00b47ea24f86..97ba4a985edc 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1349,6 +1349,12 @@ static struct usb_device_id acm_ids[] = {
         { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
         .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
         },
+        { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */
+        .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+        },
+        { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
+        .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+        },
         { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
         .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
         },
@@ -1370,6 +1376,9 @@ static struct usb_device_id acm_ids[] = {
         { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
         .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
         },
+        { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
+        .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+        },
 
         /* control interfaces with various AT-command sets */
         { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index b5775af3ba26..3f3ee1351930 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -226,6 +226,7 @@ static const struct quirk_printer_struct quirk_printers[] = {
         { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
         { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
         { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
+        { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
         { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
         { 0, 0 }
 };
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 26fece124e0e..7513bb083c15 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1700,7 +1700,7 @@ const struct file_operations usbdev_file_operations = {
         .release =      usbdev_release,
 };
 
-void usb_fs_classdev_common_remove(struct usb_device *udev)
+static void usbdev_remove(struct usb_device *udev)
 {
         struct dev_state *ps;
         struct siginfo sinfo;
@@ -1742,10 +1742,15 @@ static void usb_classdev_remove(struct usb_device *dev)
 {
         if (dev->usb_classdev)
                 device_unregister(dev->usb_classdev);
-        usb_fs_classdev_common_remove(dev);
 }
 
-static int usb_classdev_notify(struct notifier_block *self,
+#else
+#define usb_classdev_add(dev)           0
+#define usb_classdev_remove(dev)        do {} while (0)
+
+#endif
+
+static int usbdev_notify(struct notifier_block *self,
                                unsigned long action, void *dev)
 {
         switch (action) {
@@ -1755,15 +1760,15 @@ static int usb_classdev_notify(struct notifier_block *self,
                 break;
         case USB_DEVICE_REMOVE:
                 usb_classdev_remove(dev);
+                usbdev_remove(dev);
                 break;
         }
         return NOTIFY_OK;
 }
 
 static struct notifier_block usbdev_nb = {
-        .notifier_call =        usb_classdev_notify,
+        .notifier_call =        usbdev_notify,
 };
-#endif
 
 static struct cdev usb_device_cdev;
 
@@ -1798,9 +1803,8 @@ int __init usb_devio_init(void)
          * to /sys/dev
          */
         usb_classdev_class->dev_kobj = NULL;
-
-        usb_register_notify(&usbdev_nb);
 #endif
+        usb_register_notify(&usbdev_nb);
 out:
         return retval;
 
@@ -1811,8 +1815,8 @@ error_cdev:
 
 void usb_devio_cleanup(void)
 {
-#ifdef CONFIG_USB_DEVICE_CLASS
         usb_unregister_notify(&usbdev_nb);
+#ifdef CONFIG_USB_DEVICE_CLASS
         class_destroy(usb_classdev_class);
 #endif
         cdev_del(&usb_device_cdev);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 98760553bc95..d0a21a5f8201 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -284,7 +284,7 @@ static int usb_unbind_interface(struct device *dev)
          * supports "soft" unbinding.
          */
         if (!driver->soft_unbind)
-                usb_disable_interface(udev, intf);
+                usb_disable_interface(udev, intf, false);
 
         driver->disconnect(intf);
         usb_cancel_queued_reset(intf);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 507741ed4482..c54fc40458b1 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -128,7 +128,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
         }
 
         pci_set_master(dev);
-        device_set_wakeup_enable(&dev->dev, 1);
 
         retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
         if (retval != 0)
@@ -201,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
         struct usb_hcd          *hcd = pci_get_drvdata(dev);
         int                     retval = 0;
         int                     wake, w;
+        int                     has_pci_pm;
 
         /* Root hub suspend should have stopped all downstream traffic,
          * and all bus master traffic.  And done so for both the interface
@@ -230,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
 
         synchronize_irq(dev->irq);
 
+        /* Downstream ports from this root hub should already be quiesced, so
+         * there will be no DMA activity.  Now we can shut down the upstream
+         * link (except maybe for PME# resume signaling) and enter some PCI
+         * low power state, if the hardware allows.
+         */
+        pci_disable_device(dev);
+
+        pci_save_state(dev);
+
         /* Don't fail on error to enable wakeup.  We rely on pci code
          * to reject requests the hardware can't implement, rather
          * than coding the same thing.
@@ -241,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
                 wake = w;
         dev_dbg(&dev->dev, "wakeup: %d\n", wake);
 
-        /* Downstream ports from this root hub should already be quiesced, so
-         * there will be no DMA activity.  Now we can shut down the upstream
-         * link (except maybe for PME# resume signaling) and enter some PCI
-         * low power state, if the hardware allows.
-         */
-        pci_disable_device(dev);
- done:
-        return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
-        int                     retval = 0;
-        int                     has_pci_pm;
-
-        /* We might already be suspended (runtime PM -- not yet written) */
-        if (dev->current_state != PCI_D0)
-                goto done;
-
-        pci_save_state(dev);
-
         /* Don't change state if we don't need to */
         if (message.event == PM_EVENT_FREEZE ||
                         message.event == PM_EVENT_PRETHAW) {
@@ -315,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
  done:
         return retval;
 }
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 
 /**
  * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
@@ -325,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
  */
 int usb_hcd_pci_resume_early(struct pci_dev *dev)
 {
-        int             retval = 0;
-        pci_power_t     state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
-        /* Reenable ASIC clocks for USB */
-        if (machine_is(powermac)) {
-                struct device_node *of_node;
-
-                of_node = pci_device_to_OF_node(dev);
-                if (of_node)
-                        pmac_call_feature(PMAC_FTR_USB_ENABLE,
-                                                of_node, 0, 1);
-        }
-#endif
-
-        /* NOTE:  chip docs cover clean "real suspend" cases (what Linux
-         * calls "standby", "suspend to RAM", and so on).  There are also
-         * dirty cases when swsusp fakes a suspend in "shutdown" mode.
-         */
-        if (state != PCI_D0) {
-#ifdef  DEBUG
-                int     pci_pm;
-                u16     pmcr;
-
-                pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-                pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
-                pmcr &= PCI_PM_CTRL_STATE_MASK;
-                if (pmcr) {
-                        /* Clean case:  power to USB and to HC registers was
-                         * maintained; remote wakeup is easy.
-                         */
-                        dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
-                } else {
-                        /* Clean:  HC lost Vcc power, D0 uninitialized
-                         *   + Vaux may have preserved port and transceiver
-                         *     state ... for remote wakeup from D3cold
-                         *   + or not; HCD must reinit + re-enumerate
-                         *
-                         * Dirty: D0 semi-initialized cases with swsusp
-                         *   + after BIOS init
-                         *   + after Linux init (HCD statically linked)
-                         */
-                        dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
-                                        state);
-                }
-#endif
-
-                retval = pci_set_power_state(dev, PCI_D0);
-        } else {
-                /* Same basic cases: clean (powered/not), dirty */
-                dev_dbg(&dev->dev, "PCI legacy resume\n");
-        }
-
-        if (retval < 0)
-                dev_err(&dev->dev, "can't resume: %d\n", retval);
-        else
-                pci_restore_state(dev);
-
-        return retval;
+        pci_restore_state(dev);
+        return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
 
@@ -398,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
         struct usb_hcd          *hcd;
         int                     retval;
 
+#ifdef CONFIG_PPC_PMAC
+        /* Reenable ASIC clocks for USB */
+        if (machine_is(powermac)) {
+                struct device_node *of_node;
+
+                of_node = pci_device_to_OF_node(dev);
+                if (of_node)
+                        pmac_call_feature(PMAC_FTR_USB_ENABLE,
+                                                of_node, 0, 1);
+        }
+#endif
+
         hcd = pci_get_drvdata(dev);
         if (hcd->state != HC_STATE_SUSPENDED) {
                 dev_dbg(hcd->self.controller,
@@ -405,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
                 return 0;
         }
 
+        pci_enable_wake(dev, PCI_D0, false);
+
         retval = pci_enable_device(dev);
         if (retval < 0) {
                 dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 572d2cf46e8d..5b94a56bec23 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev);
 
 #ifdef CONFIG_PM
 extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
 extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
 extern int usb_hcd_pci_resume(struct pci_dev *dev);
 #endif /* CONFIG_PM */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 94d5ee263c20..cd50d86029e7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2382,8 +2382,8 @@ static int hub_port_debounce(struct usb_hub *hub, int port1)
 
 void usb_ep0_reinit(struct usb_device *udev)
 {
-        usb_disable_endpoint(udev, 0 + USB_DIR_IN);
-        usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+        usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
+        usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
         usb_enable_endpoint(udev, &udev->ep0, true);
 }
 EXPORT_SYMBOL_GPL(usb_ep0_reinit);
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 2a129cb7bb56..dff5760a37f6 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -717,7 +717,6 @@ static void usbfs_remove_device(struct usb_device *dev)
                 fs_remove_file (dev->usbfs_dentry);
                 dev->usbfs_dentry = NULL;
         }
-        usb_fs_classdev_common_remove(dev);
 }
 
 static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index de51667dd64d..31fb204f44c6 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1039,14 +1039,15 @@ static void remove_intf_ep_devs(struct usb_interface *intf)
  * @dev: the device whose endpoint is being disabled
  * @epaddr: the endpoint's address.  Endpoint number for output,
  *      endpoint number + USB_DIR_IN for input
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *      controller hardware
  *
- * Deallocates hcd/hardware state for this endpoint ... and nukes all
- * pending urbs.
- *
- * If the HCD hasn't registered a disable() function, this sets the
- * endpoint's maxpacket size to 0 to prevent further submissions.
+ * Disables the endpoint for URB submission and nukes all pending URBs.
+ * If @reset_hardware is set then also deallocates hcd/hardware state
+ * for the endpoint.
  */
-void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
+void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+                bool reset_hardware)
 {
         unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
         struct usb_host_endpoint *ep;
@@ -1056,15 +1057,18 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
 
         if (usb_endpoint_out(epaddr)) {
                 ep = dev->ep_out[epnum];
-                dev->ep_out[epnum] = NULL;
+                if (reset_hardware)
+                        dev->ep_out[epnum] = NULL;
         } else {
                 ep = dev->ep_in[epnum];
-                dev->ep_in[epnum] = NULL;
+                if (reset_hardware)
+                        dev->ep_in[epnum] = NULL;
         }
         if (ep) {
                 ep->enabled = 0;
                 usb_hcd_flush_endpoint(dev, ep);
-                usb_hcd_disable_endpoint(dev, ep);
+                if (reset_hardware)
+                        usb_hcd_disable_endpoint(dev, ep);
         }
 }
 
@@ -1072,17 +1076,21 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
  * usb_disable_interface -- Disable all endpoints for an interface
  * @dev: the device whose interface is being disabled
  * @intf: pointer to the interface descriptor
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *      controller hardware
  *
  * Disables all the endpoints for the interface's current altsetting.
  */
-void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf)
+void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
+                bool reset_hardware)
 {
         struct usb_host_interface *alt = intf->cur_altsetting;
         int i;
 
         for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
                 usb_disable_endpoint(dev,
-                                alt->endpoint[i].desc.bEndpointAddress);
+                                alt->endpoint[i].desc.bEndpointAddress,
+                                reset_hardware);
         }
 }
 
@@ -1103,8 +1111,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
         dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
                 skip_ep0 ? "non-ep0" : "all");
         for (i = skip_ep0; i < 16; ++i) {
-                usb_disable_endpoint(dev, i);
-                usb_disable_endpoint(dev, i + USB_DIR_IN);
+                usb_disable_endpoint(dev, i, true);
+                usb_disable_endpoint(dev, i + USB_DIR_IN, true);
         }
         dev->toggle[0] = dev->toggle[1] = 0;
 
@@ -1274,7 +1282,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
                 remove_intf_ep_devs(iface);
                 usb_remove_sysfs_intf_files(iface);
         }
-        usb_disable_interface(dev, iface);
+        usb_disable_interface(dev, iface, true);
 
         iface->cur_altsetting = alt;
 
@@ -1353,8 +1361,8 @@ int usb_reset_configuration(struct usb_device *dev)
          */
 
         for (i = 1; i < 16; ++i) {
-                usb_disable_endpoint(dev, i);
-                usb_disable_endpoint(dev, i + USB_DIR_IN);
+                usb_disable_endpoint(dev, i, true);
+                usb_disable_endpoint(dev, i + USB_DIR_IN, true);
         }
 
         config = dev->actconfig;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 386177867a8a..79d8a9ea559b 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -15,9 +15,10 @@ extern void usb_enable_endpoint(struct usb_device *dev,
                 struct usb_host_endpoint *ep, bool reset_toggle);
 extern void usb_enable_interface(struct usb_device *dev,
                 struct usb_interface *intf, bool reset_toggles);
-extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr);
+extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+                bool reset_hardware);
 extern void usb_disable_interface(struct usb_device *dev,
-                struct usb_interface *intf);
+                struct usb_interface *intf, bool reset_hardware);
 extern void usb_release_interface_cache(struct kref *ref);
 extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
 extern int usb_deauthorize_device(struct usb_device *);
@@ -151,7 +152,6 @@ extern struct usb_driver usbfs_driver;
 extern const struct file_operations usbfs_devices_fops;
 extern const struct file_operations usbdev_file_operations;
 extern void usbfs_conn_disc_event(void);
-extern void usb_fs_classdev_common_remove(struct usb_device *udev);
 
 extern int usb_devio_init(void);
 extern void usb_devio_cleanup(void);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f2da0269e1b1..5d11c291f1ad 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -683,6 +683,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
         struct usb_request              *req = cdev->req;
         int                             value = -EOPNOTSUPP;
         u16                             w_index = le16_to_cpu(ctrl->wIndex);
+        u8                              intf = w_index & 0xFF;
         u16                             w_value = le16_to_cpu(ctrl->wValue);
         u16                             w_length = le16_to_cpu(ctrl->wLength);
         struct usb_function             *f = NULL;
@@ -769,10 +770,10 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                         goto unknown;
                 if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
                         break;
-                f = cdev->config->interface[w_index];
+                f = cdev->config->interface[intf];
                 if (!f)
                         break;
-                if (w_value && !f->get_alt)
+                if (w_value && !f->set_alt)
                         break;
                 value = f->set_alt(f, w_index, w_value);
                 break;
@@ -781,7 +782,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
                         goto unknown;
                 if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
                         break;
-                f = cdev->config->interface[w_index];
+                f = cdev->config->interface[intf];
                 if (!f)
                         break;
                 /* lots of interfaces only need altsetting zero... */
@@ -808,7 +809,7 @@ unknown:
                  */
                 if ((ctrl->bRequestType & USB_RECIP_MASK)
                                 == USB_RECIP_INTERFACE) {
-                        f = cdev->config->interface[w_index];
+                        f = cdev->config->interface[intf];
                         if (f && f->setup)
                                 value = f->setup(f, ctrl);
                         else
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index cde8fdf15d5b..77c5d0a8a06e 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -297,7 +297,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep)
 
                 for (i = 0; i < 100; i ++) {
                         temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
-                        if (!temp & EPSTAT_STALL)
+                        if (!(temp & EPSTAT_STALL))
                                 break;
                         udelay(20);
                 }
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2b476b6b3d4d..2c63bfb1f8d9 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -140,6 +140,7 @@ config USB_OHCI_HCD
         tristate "OHCI HCD support"
         depends on USB && USB_ARCH_HAS_OHCI
         select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+        select USB_OTG_UTILS if ARCH_OMAP
         ---help---
           The Open Host Controller Interface (OHCI) is a standard for accessing
           USB 1.1 host controller hardware.  It does more in hardware than Intel's
@@ -238,6 +239,23 @@ config USB_UHCI_HCD
           To compile this driver as a module, choose M here: the
           module will be called uhci-hcd.
 
+config USB_FHCI_HCD
+        tristate "Freescale QE USB Host Controller support"
+        depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
+        select FSL_GTM
+        select QE_USB
+        help
+          This driver enables support for Freescale QE USB Host Controller
+          (as found on MPC8360 and MPC8323 processors), the driver supports
+          Full and Low Speed USB.
+
+config FHCI_DEBUG
+        bool "Freescale QE USB Host Controller debug support"
+        depends on USB_FHCI_HCD && DEBUG_FS
+        help
+          Say "y" to see some FHCI debug information and statistics
+          throught debugfs.
+
 config USB_U132_HCD
         tristate "Elan U132 Adapter Host Controller"
         depends on USB && USB_FTDI_ELAN
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e5f3f20787e4..f163571e33d8 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y)
 endif
 
 isp1760-objs := isp1760-hcd.o isp1760-if.o
+fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
+             fhci-tds.o fhci-sched.o
+ifeq ($(CONFIG_FHCI_DEBUG),y)
+fhci-objs += fhci-dbg.o
+endif
 
 obj-$(CONFIG_USB_WHCI_HCD)      += whci/
 
@@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)   += isp116x-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)      += ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)      += uhci-hcd.o
+obj-$(CONFIG_USB_FHCI_HCD)      += fhci.o
 obj-$(CONFIG_USB_SL811_HCD)     += sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)      += sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)      += u132-hcd.o
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bdc6e86e1f8b..bb21fb0a4969 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -230,7 +230,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                 pci_read_config_word(pdev, 0x62, &port_wake);
                 if (port_wake & 0x0001) {
                         dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
-                        device_init_wakeup(&pdev->dev, 1);
+                        device_set_wakeup_capable(&pdev->dev, 1);
                 }
         }
 
@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = {
 
 #ifdef  CONFIG_PM
         .suspend =      usb_hcd_pci_suspend,
-        .suspend_late = usb_hcd_pci_suspend_late,
         .resume_early = usb_hcd_pci_resume_early,
         .resume =       usb_hcd_pci_resume,
 #endif
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
new file mode 100644
index 000000000000..34e14edf390b
--- /dev/null
+++ b/drivers/usb/host/fhci-dbg.c
@@ -0,0 +1,139 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er)
+{
+        int i;
+
+        if (usb_er == -1) {
+                fhci->usb_irq_stat[12]++;
+                return;
+        }
+
+        for (i = 0; i < 12; ++i) {
+                if (usb_er & (1 << i))
+                        fhci->usb_irq_stat[i]++;
+        }
+}
+
+static int fhci_dfs_regs_show(struct seq_file *s, void *v)
+{
+        struct fhci_hcd *fhci = s->private;
+        struct fhci_regs __iomem *regs = fhci->regs;
+
+        seq_printf(s,
+                "mode: 0x%x\n" "addr: 0x%x\n"
+                "command: 0x%x\n" "ep0: 0x%x\n"
+                "event: 0x%x\n" "mask: 0x%x\n"
+                "status: 0x%x\n" "SOF timer: %d\n"
+                "frame number: %d\n"
+                "lines status: 0x%x\n",
+                in_8(&regs->usb_mod), in_8(&regs->usb_addr),
+                in_8(&regs->usb_comm), in_be16(&regs->usb_ep[0]),
+                in_be16(&regs->usb_event), in_be16(&regs->usb_mask),
+                in_8(&regs->usb_status), in_be16(&regs->usb_sof_tmr),
+                in_be16(&regs->usb_frame_num),
+                fhci_ioports_check_bus_state(fhci));
+
+        return 0;
+}
+
+static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v)
+{
+        struct fhci_hcd *fhci = s->private;
+        int *usb_irq_stat = fhci->usb_irq_stat;
+
+        seq_printf(s,
+                "RXB: %d\n" "TXB: %d\n" "BSY: %d\n"
+                "SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n"
+                "TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n"
+                "RESET: %d\n" "SFT: %d\n" "MSF: %d\n"
+                "IDLE_ONLY: %d\n",
+                usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2],
+                usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5],
+                usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8],
+                usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11],
+                usb_irq_stat[12]);
+
+        return 0;
+}
+
+static int fhci_dfs_regs_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, fhci_dfs_regs_show, inode->i_private);
+}
+
+static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, fhci_dfs_irq_stat_show, inode->i_private);
+}
+
+static const struct file_operations fhci_dfs_regs_fops = {
+        .open = fhci_dfs_regs_open,
+        .read = seq_read,
+        .llseek = seq_lseek,
+        .release = single_release,
+};
+
+static const struct file_operations fhci_dfs_irq_stat_fops = {
+        .open = fhci_dfs_irq_stat_open,
+        .read = seq_read,
+        .llseek = seq_lseek,
+        .release = single_release,
+};
+
+void fhci_dfs_create(struct fhci_hcd *fhci)
+{
+        struct device *dev = fhci_to_hcd(fhci)->self.controller;
+
+        fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL);
+        if (!fhci->dfs_root) {
+                WARN_ON(1);
+                return;
+        }
+
+        fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO,
+                fhci->dfs_root, fhci, &fhci_dfs_regs_fops);
+
+        fhci->dfs_irq_stat = debugfs_create_file("irq_stat",
+                S_IFREG | S_IRUGO, fhci->dfs_root, fhci,
+                &fhci_dfs_irq_stat_fops);
+
+        WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat);
+}
+
+void fhci_dfs_destroy(struct fhci_hcd *fhci)
+{
+        if (!fhci->dfs_root)
+                return;
+
+        if (fhci->dfs_irq_stat)
+                debugfs_remove(fhci->dfs_irq_stat);
+
+        if (fhci->dfs_regs)
+                debugfs_remove(fhci->dfs_regs);
+
+        debugfs_remove(fhci->dfs_root);
+}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
new file mode 100644
index 000000000000..ba622cc8a9ba
--- /dev/null
+++ b/drivers/usb/host/fhci-hcd.c
@@ -0,0 +1,836 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_start_sof_timer(struct fhci_hcd *fhci)
+{
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        /* clear frame_n */
+        out_be16(&fhci->pram->frame_num, 0);
+
+        out_be16(&fhci->regs->usb_sof_tmr, 0);
+        setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+
+        fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_stop_sof_timer(struct fhci_hcd *fhci)
+{
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+        gtm_stop_timer16(fhci->timer);
+
+        fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb)
+{
+        return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12);
+}
+
+/* initialize the endpoint zero */
+static u32 endpoint_zero_init(struct fhci_usb *usb,
+                              enum fhci_mem_alloc data_mem,
+                              u32 ring_len)
+{
+        u32 rc;
+
+        rc = fhci_create_ep(usb, data_mem, ring_len);
+        if (rc)
+                return rc;
+
+        /* inilialize endpoint registers */
+        fhci_init_ep_registers(usb, usb->ep0, data_mem);
+
+        return 0;
+}
+
+/* enable the USB interrupts */
+void fhci_usb_enable_interrupt(struct fhci_usb *usb)
+{
+        struct fhci_hcd *fhci = usb->fhci;
+
+        if (usb->intr_nesting_cnt == 1) {
+                /* initialize the USB interrupt */
+                enable_irq(fhci_to_hcd(fhci)->irq);
+
+                /* initialize the event register and mask register */
+                out_be16(&usb->fhci->regs->usb_event, 0xffff);
+                out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+                /* enable the timer interrupts */
+                enable_irq(fhci->timer->irq);
+        } else if (usb->intr_nesting_cnt > 1)
+                fhci_info(fhci, "unbalanced USB interrupts nesting\n");
+        usb->intr_nesting_cnt--;
+}
+
+/* diable the usb interrupt */
+void fhci_usb_disable_interrupt(struct fhci_usb *usb)
+{
+        struct fhci_hcd *fhci = usb->fhci;
+
+        if (usb->intr_nesting_cnt == 0) {
+                /* diable the timer interrupt */
+                disable_irq_nosync(fhci->timer->irq);
+
+                /* disable the usb interrupt */
+                disable_irq_nosync(fhci_to_hcd(fhci)->irq);
+                out_be16(&usb->fhci->regs->usb_mask, 0);
+        }
+        usb->intr_nesting_cnt++;
+}
+
+/* enable the USB controller */
+static u32 fhci_usb_enable(struct fhci_hcd *fhci)
+{
+        struct fhci_usb *usb = fhci->usb_lld;
+
+        out_be16(&usb->fhci->regs->usb_event, 0xffff);
+        out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+        setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+        mdelay(100);
+
+        return 0;
+}
+
+/* disable the USB controller */
+static u32 fhci_usb_disable(struct fhci_hcd *fhci)
+{
+        struct fhci_usb *usb = fhci->usb_lld;
+
+        fhci_usb_disable_interrupt(usb);
+        fhci_port_disable(fhci);
+
+        /* disable the usb controller */
+        if (usb->port_status == FHCI_PORT_FULL ||
+                        usb->port_status == FHCI_PORT_LOW)
+                fhci_device_disconnected_interrupt(fhci);
+
+        clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+        return 0;
+}
+
+/* check the bus state by polling the QE bit on the IO ports */
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci)
+{
+        u8 bits = 0;
+
+        /* check USBOE,if transmitting,exit */
+        if (!gpio_get_value(fhci->gpios[GPIO_USBOE]))
+                return -1;
+
+        /* check USBRP */
+        if (gpio_get_value(fhci->gpios[GPIO_USBRP]))
+                bits |= 0x2;
+
+        /* check USBRN */
+        if (gpio_get_value(fhci->gpios[GPIO_USBRN]))
+                bits |= 0x1;
+
+        return bits;
+}
+
+static void fhci_mem_free(struct fhci_hcd *fhci)
+{
+        struct ed *ed;
+        struct ed *next_ed;
+        struct td *td;
+        struct td *next_td;
+
+        list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) {
+                list_del(&ed->node);
+                kfree(ed);
+        }
+
+        list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) {
+                list_del(&td->node);
+                kfree(td);
+        }
+
+        kfree(fhci->vroot_hub);
+        fhci->vroot_hub = NULL;
+
+        kfree(fhci->hc_list);
+        fhci->hc_list = NULL;
+}
+
+static int fhci_mem_init(struct fhci_hcd *fhci)
+{
+        int i;
+
+        fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL);
+        if (!fhci->hc_list)
+                goto err;
+
+        INIT_LIST_HEAD(&fhci->hc_list->ctrl_list);
+        INIT_LIST_HEAD(&fhci->hc_list->bulk_list);
+        INIT_LIST_HEAD(&fhci->hc_list->iso_list);
+        INIT_LIST_HEAD(&fhci->hc_list->intr_list);
+        INIT_LIST_HEAD(&fhci->hc_list->done_list);
+
+        fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL);
+        if (!fhci->vroot_hub)
+                goto err;
+
+        INIT_LIST_HEAD(&fhci->empty_eds);
+        INIT_LIST_HEAD(&fhci->empty_tds);
+
+        /* initialize work queue to handle done list */
+        fhci_tasklet.data = (unsigned long)fhci;
+        fhci->process_done_task = &fhci_tasklet;
+
+        for (i = 0; i < MAX_TDS; i++) {
+                struct td *td;
+
+                td = kmalloc(sizeof(*td), GFP_KERNEL);
+                if (!td)
+                        goto err;
+                fhci_recycle_empty_td(fhci, td);
+        }
+        for (i = 0; i < MAX_EDS; i++) {
+                struct ed *ed;
+
+                ed = kmalloc(sizeof(*ed), GFP_KERNEL);
+                if (!ed)
+                        goto err;
+                fhci_recycle_empty_ed(fhci, ed);
+        }
+
+        fhci->active_urbs = 0;
+        return 0;
+err:
+        fhci_mem_free(fhci);
+        return -ENOMEM;
+}
+
+/* destroy the fhci_usb structure */
+static void fhci_usb_free(void *lld)
+{
+        struct fhci_usb *usb = lld;
+        struct fhci_hcd *fhci = usb->fhci;
+
+        if (usb) {
+                fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+                fhci_ep0_free(usb);
+                kfree(usb->actual_frame);
+                kfree(usb);
+        }
+}
+
+/* initialize the USB */
+static int fhci_usb_init(struct fhci_hcd *fhci)
+{
+        struct fhci_usb *usb = fhci->usb_lld;
+
+        memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE);
+
+        usb->port_status = FHCI_PORT_DISABLED;
+        usb->max_frame_usage = FRAME_TIME_USAGE;
+        usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION;
+
+        usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL);
+        if (!usb->actual_frame) {
+                fhci_usb_free(usb);
+                return -ENOMEM;
+        }
+
+        INIT_LIST_HEAD(&usb->actual_frame->tds_list);
+
+        /* initializing registers on chip, clear frame number */
+        out_be16(&fhci->pram->frame_num, 0);
+
+        /* clear rx state */
+        out_be32(&fhci->pram->rx_state, 0);
+
+        /* set mask register */
+        usb->saved_msk = (USB_E_TXB_MASK |
+                          USB_E_TXE1_MASK |
+                          USB_E_IDLE_MASK |
+                          USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK);
+
+        out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN);
+
+        /* clearing the mask register */
+        out_be16(&usb->fhci->regs->usb_mask, 0);
+
+        /* initialing the event register */
+        out_be16(&usb->fhci->regs->usb_event, 0xffff);
+
+        if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) {
+                fhci_usb_free(usb);
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+/* initialize the fhci_usb struct and the corresponding data staruct */
+static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci)
+{
+        struct fhci_usb *usb;
+
+        /* allocate memory for SCC data structure */
+        usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+        if (!usb) {
+                fhci_err(fhci, "no memory for SCC data struct\n");
+                return NULL;
+        }
+
+        usb->fhci = fhci;
+        usb->hc_list = fhci->hc_list;
+        usb->vroot_hub = fhci->vroot_hub;
+
+        usb->transfer_confirm = fhci_transfer_confirm_callback;
+
+        return usb;
+}
+
+static int fhci_start(struct usb_hcd *hcd)
+{
+        int ret;
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+        ret = fhci_mem_init(fhci);
+        if (ret) {
+                fhci_err(fhci, "failed to allocate memory\n");
+                goto err;
+        }
+
+        fhci->usb_lld = fhci_create_lld(fhci);
+        if (!fhci->usb_lld) {
+                fhci_err(fhci, "low level driver config failed\n");
+                ret = -ENOMEM;
+                goto err;
+        }
+
+        ret = fhci_usb_init(fhci);
+        if (ret) {
+                fhci_err(fhci, "low level driver initialize failed\n");
+                goto err;
+        }
+
+        spin_lock_init(&fhci->lock);
+
+        /* connect the virtual root hub */
+        fhci->vroot_hub->dev_num = 1;   /* this field may be needed to fix */
+        fhci->vroot_hub->hub.wHubStatus = 0;
+        fhci->vroot_hub->hub.wHubChange = 0;
+        fhci->vroot_hub->port.wPortStatus = 0;
+        fhci->vroot_hub->port.wPortChange = 0;
+
+        hcd->state = HC_STATE_RUNNING;
+
+        /*
+         * From here on, khubd concurrently accesses the root
+         * hub; drivers will be talking to enumerated devices.
+         * (On restart paths, khubd already knows about the root
+         * hub and could find work as soon as we wrote FLAG_CF.)
+         *
+         * Before this point the HC was idle/ready.  After, khubd
+         * and device drivers may start it running.
+         */
+        fhci_usb_enable(fhci);
+        return 0;
+err:
+        fhci_mem_free(fhci);
+        return ret;
+}
+
+static void fhci_stop(struct usb_hcd *hcd)
+{
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+        fhci_usb_disable_interrupt(fhci->usb_lld);
+        fhci_usb_disable(fhci);
+
+        fhci_usb_free(fhci->usb_lld);
+        fhci->usb_lld = NULL;
+        fhci_mem_free(fhci);
+}
+
+static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+                            gfp_t mem_flags)
+{
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+        u32 pipe = urb->pipe;
+        int ret;
+        int i;
+        int size = 0;
+        struct urb_priv *urb_priv;
+        unsigned long flags;
+
+        switch (usb_pipetype(pipe)) {
+        case PIPE_CONTROL:
+                /* 1 td fro setup,1 for ack */
+                size = 2;
+        case PIPE_BULK:
+                /* one td for every 4096 bytes(can be upto 8k) */
+                size += urb->transfer_buffer_length / 4096;
+                /* ...add for any remaining bytes... */
+                if ((urb->transfer_buffer_length % 4096) != 0)
+                        size++;
+                /* ..and maybe a zero length packet to wrap it up */
+                if (size == 0)
+                        size++;
+                else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+                         && (urb->transfer_buffer_length
+                             % usb_maxpacket(urb->dev, pipe,
+                                             usb_pipeout(pipe))) != 0)
+                        size++;
+                break;
+        case PIPE_ISOCHRONOUS:
+                size = urb->number_of_packets;
+                if (size <= 0)
+                        return -EINVAL;
+                for (i = 0; i < urb->number_of_packets; i++) {
+                        urb->iso_frame_desc[i].actual_length = 0;
+                        urb->iso_frame_desc[i].status = (u32) (-EXDEV);
+                }
+                break;
+        case PIPE_INTERRUPT:
+                size = 1;
+        }
+
+        /* allocate the private part of the URB */
+        urb_priv = kzalloc(sizeof(*urb_priv), mem_flags);
+        if (!urb_priv)
+                return -ENOMEM;
+
+        /* allocate the private part of the URB */
+        urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags);
+        if (!urb_priv->tds) {
+                kfree(urb_priv);
+                return -ENOMEM;
+        }
+
+        spin_lock_irqsave(&fhci->lock, flags);
+
+        ret = usb_hcd_link_urb_to_ep(hcd, urb);
+        if (ret)
+                goto err;
+
+        /* fill the private part of the URB */
+        urb_priv->num_of_tds = size;
+
+        urb->status = -EINPROGRESS;
+        urb->actual_length = 0;
+        urb->error_count = 0;
+        urb->hcpriv = urb_priv;
+
+        fhci_queue_urb(fhci, urb);
+err:
+        if (ret) {
+                kfree(urb_priv->tds);
+                kfree(urb_priv);
+        }
+        spin_unlock_irqrestore(&fhci->lock, flags);
+        return ret;
+}
+
+/* dequeue FHCI URB */
+static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+        struct fhci_usb *usb = fhci->usb_lld;
+        int ret = -EINVAL;
+        unsigned long flags;
+
+        if (!urb || !urb->dev || !urb->dev->bus)
+                goto out;
+
+        spin_lock_irqsave(&fhci->lock, flags);
+
+        ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (ret)
+                goto out2;
+
+        if (usb->port_status != FHCI_PORT_DISABLED) {
+                struct urb_priv *urb_priv;
+
+                /*
+                 * flag the urb's data for deletion in some upcoming
+                 * SF interrupt's delete list processing
+                 */
+                urb_priv = urb->hcpriv;
+
+                if (!urb_priv || (urb_priv->state == URB_DEL))
+                        goto out2;
+
+                urb_priv->state = URB_DEL;
+
+                /* already pending? */
+                urb_priv->ed->state = FHCI_ED_URB_DEL;
+        } else {
+                fhci_urb_complete_free(fhci, urb);
+        }
+
+out2:
+        spin_unlock_irqrestore(&fhci->lock, flags);
+out:
+        return ret;
+}
+
+static void fhci_endpoint_disable(struct usb_hcd *hcd,
+                                  struct usb_host_endpoint *ep)
+{
+        struct fhci_hcd *fhci;
+        struct ed *ed;
+        unsigned long flags;
+
+        fhci = hcd_to_fhci(hcd);
+        spin_lock_irqsave(&fhci->lock, flags);
+        ed = ep->hcpriv;
+        if (ed) {
+                while (ed->td_head != NULL) {
+                        struct td *td = fhci_remove_td_from_ed(ed);
+                        fhci_urb_complete_free(fhci, td->urb);
+                }
+                fhci_recycle_empty_ed(fhci, ed);
+                ep->hcpriv = NULL;
+        }
+        spin_unlock_irqrestore(&fhci->lock, flags);
+}
+
+static int fhci_get_frame_number(struct usb_hcd *hcd)
+{
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+        return get_frame_num(fhci);
+}
+
+static const struct hc_driver fhci_driver = {
+        .description = "fsl,usb-fhci",
+        .product_desc = "FHCI HOST Controller",
+        .hcd_priv_size = sizeof(struct fhci_hcd),
+
+        /* generic hardware linkage */
+        .irq = fhci_irq,
+        .flags = HCD_USB11 | HCD_MEMORY,
+
+        /* basic lifecycle operation */
+        .start = fhci_start,
+        .stop = fhci_stop,
+
+        /* managing i/o requests and associated device resources */
+        .urb_enqueue = fhci_urb_enqueue,
+        .urb_dequeue = fhci_urb_dequeue,
+        .endpoint_disable = fhci_endpoint_disable,
+
+        /* scheduling support */
+        .get_frame_number = fhci_get_frame_number,
+
+        /* root hub support */
+        .hub_status_data = fhci_hub_status_data,
+        .hub_control = fhci_hub_control,
+};
+
+static int __devinit of_fhci_probe(struct of_device *ofdev,
+                                   const struct of_device_id *ofid)
+{
+        struct device *dev = &ofdev->dev;
+        struct device_node *node = ofdev->node;
+        struct usb_hcd *hcd;
+        struct fhci_hcd *fhci;
+        struct resource usb_regs;
+        unsigned long pram_addr;
+        unsigned int usb_irq;
+        const char *sprop;
+        const u32 *iprop;
+        int size;
+        int ret;
+        int i;
+        int j;
+
+        if (usb_disabled())
+                return -ENODEV;
+
+        sprop = of_get_property(node, "mode", NULL);
+        if (sprop && strcmp(sprop, "host"))
+                return -ENODEV;
+
+        hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id);
+        if (!hcd) {
+                dev_err(dev, "could not create hcd\n");
+                return -ENOMEM;
+        }
+
+        fhci = hcd_to_fhci(hcd);
+        hcd->self.controller = dev;
+        dev_set_drvdata(dev, hcd);
+
+        iprop = of_get_property(node, "hub-power-budget", &size);
+        if (iprop && size == sizeof(*iprop))
+                hcd->power_budget = *iprop;
+
+        /* FHCI registers. */
+        ret = of_address_to_resource(node, 0, &usb_regs);
+        if (ret) {
+                dev_err(dev, "could not get regs\n");
+                goto err_regs;
+        }
+
+        hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1);
+        if (!hcd->regs) {
+                dev_err(dev, "could not ioremap regs\n");
+                ret = -ENOMEM;
+                goto err_regs;
+        }
+        fhci->regs = hcd->regs;
+
+        /* Parameter RAM. */
+        iprop = of_get_property(node, "reg", &size);
+        if (!iprop || size < sizeof(*iprop) * 4) {
+                dev_err(dev, "can't get pram offset\n");
+                ret = -EINVAL;
+                goto err_pram;
+        }
+
+        pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+        if (IS_ERR_VALUE(pram_addr)) {
+                dev_err(dev, "failed to allocate usb pram\n");
+                ret = -ENOMEM;
+                goto err_pram;
+        }
+        fhci->pram = cpm_muram_addr(pram_addr);
+
+        /* GPIOs and pins */
+        for (i = 0; i < NUM_GPIOS; i++) {
+                int gpio;
+                enum of_gpio_flags flags;
+
+                gpio = of_get_gpio_flags(node, i, &flags);
+                fhci->gpios[i] = gpio;
+                fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW;
+
+                if (!gpio_is_valid(gpio)) {
+                        if (i < GPIO_SPEED) {
+                                dev_err(dev, "incorrect GPIO%d: %d\n",
+                                        i, gpio);
+                                goto err_gpios;
+                        } else {
+                                dev_info(dev, "assuming board doesn't have "
+                                        "%s gpio\n", i == GPIO_SPEED ?
+                                        "speed" : "power");
+                                continue;
+                        }
+                }
+
+                ret = gpio_request(gpio, dev->bus_id);
+                if (ret) {
+                        dev_err(dev, "failed to request gpio %d", i);
+                        goto err_gpios;
+                }
+
+                if (i >= GPIO_SPEED) {
+                        ret = gpio_direction_output(gpio, 0);
+                        if (ret) {
+                                dev_err(dev, "failed to set gpio %d as "
+                                        "an output\n", i);
+                                i++;
+                                goto err_gpios;
+                        }
+                }
+        }
+
+        for (j = 0; j < NUM_PINS; j++) {
+                fhci->pins[j] = qe_pin_request(ofdev->node, j);
+                if (IS_ERR(fhci->pins[j])) {
+                        ret = PTR_ERR(fhci->pins[j]);
+                        dev_err(dev, "can't get pin %d: %d\n", j, ret);
+                        goto err_pins;
+                }
+        }
+
+        /* Frame limit timer and its interrupt. */
+        fhci->timer = gtm_get_timer16();
+        if (IS_ERR(fhci->timer)) {
+                ret = PTR_ERR(fhci->timer);
+                dev_err(dev, "failed to request qe timer: %i", ret);
+                goto err_get_timer;
+        }
+
+        ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
+                          IRQF_DISABLED, "qe timer (usb)", hcd);
+        if (ret) {
+                dev_err(dev, "failed to request timer irq");
+                goto err_timer_irq;
+        }
+
+        /* USB Host interrupt. */
+        usb_irq = irq_of_parse_and_map(node, 0);
+        if (usb_irq == NO_IRQ) {
+                dev_err(dev, "could not get usb irq\n");
+                ret = -EINVAL;
+                goto err_usb_irq;
+        }
+
+        /* Clocks. */
+        sprop = of_get_property(node, "fsl,fullspeed-clock", NULL);
+        if (sprop) {
+                fhci->fullspeed_clk = qe_clock_source(sprop);
+                if (fhci->fullspeed_clk == QE_CLK_DUMMY) {
+                        dev_err(dev, "wrong fullspeed-clock\n");
+                        ret = -EINVAL;
+                        goto err_clocks;
+                }
+        }
+
+        sprop = of_get_property(node, "fsl,lowspeed-clock", NULL);
+        if (sprop) {
+                fhci->lowspeed_clk = qe_clock_source(sprop);
+                if (fhci->lowspeed_clk == QE_CLK_DUMMY) {
+                        dev_err(dev, "wrong lowspeed-clock\n");
+                        ret = -EINVAL;
+                        goto err_clocks;
+                }
+        }
+
+        if (fhci->fullspeed_clk == QE_CLK_NONE &&
+                        fhci->lowspeed_clk == QE_CLK_NONE) {
+                dev_err(dev, "no clocks specified\n");
+                ret = -EINVAL;
+                goto err_clocks;
+        }
+
+        dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq);
+
+        fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+
+        /* Start with full-speed, if possible. */
+        if (fhci->fullspeed_clk != QE_CLK_NONE) {
+                fhci_config_transceiver(fhci, FHCI_PORT_FULL);
+                qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+        } else {
+                fhci_config_transceiver(fhci, FHCI_PORT_LOW);
+                qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+        }
+
+        /* Clear and disable any pending interrupts. */
+        out_be16(&fhci->regs->usb_event, 0xffff);
+        out_be16(&fhci->regs->usb_mask, 0);
+
+        ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED);
+        if (ret < 0)
+                goto err_add_hcd;
+
+        fhci_dfs_create(fhci);
+
+        return 0;
+
+err_add_hcd:
+err_clocks:
+        irq_dispose_mapping(usb_irq);
+err_usb_irq:
+        free_irq(fhci->timer->irq, hcd);
+err_timer_irq:
+        gtm_put_timer16(fhci->timer);
+err_get_timer:
+err_pins:
+        while (--j >= 0)
+                qe_pin_free(fhci->pins[j]);
+err_gpios:
+        while (--i >= 0) {
+                if (gpio_is_valid(fhci->gpios[i]))
+                        gpio_free(fhci->gpios[i]);
+        }
+        cpm_muram_free(pram_addr);
+err_pram:
+        iounmap(hcd->regs);
+err_regs:
+        usb_put_hcd(hcd);
+        return ret;
+}
+
+static int __devexit fhci_remove(struct device *dev)
+{
+        struct usb_hcd *hcd = dev_get_drvdata(dev);
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+        int i;
+        int j;
+
+        usb_remove_hcd(hcd);
+        free_irq(fhci->timer->irq, hcd);
+        gtm_put_timer16(fhci->timer);
+        cpm_muram_free(cpm_muram_offset(fhci->pram));
+        for (i = 0; i < NUM_GPIOS; i++) {
+                if (!gpio_is_valid(fhci->gpios[i]))
+                        continue;
+                gpio_free(fhci->gpios[i]);
+        }
+        for (j = 0; j < NUM_PINS; j++)
+                qe_pin_free(fhci->pins[j]);
+        fhci_dfs_destroy(fhci);
+        usb_put_hcd(hcd);
+        return 0;
+}
+
+static int __devexit of_fhci_remove(struct of_device *ofdev)
+{
+        return fhci_remove(&ofdev->dev);
+}
+
+static struct of_device_id of_fhci_match[] = {
+        { .compatible = "fsl,mpc8323-qe-usb", },
+        {},
+};
+MODULE_DEVICE_TABLE(of, of_fhci_match);
+
+static struct of_platform_driver of_fhci_driver = {
+        .name           = "fsl,usb-fhci",
+        .match_table    = of_fhci_match,
+        .probe          = of_fhci_probe,
+        .remove         = __devexit_p(of_fhci_remove),
+};
+
+static int __init fhci_module_init(void)
+{
+        return of_register_platform_driver(&of_fhci_driver);
+}
+module_init(fhci_module_init);
+
+static void __exit fhci_module_exit(void)
+{
+        of_unregister_platform_driver(&of_fhci_driver);
+}
+module_exit(fhci_module_exit);
+
+MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver");
+MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, "
+              "Jerry Huang <Chang-Ming.Huang@freescale.com>, "
+              "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
new file mode 100644
index 000000000000..0cfaedc3e124
--- /dev/null
+++ b/drivers/usb/host/fhci-hub.c
@@ -0,0 +1,345 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* virtual root hub specific descriptor */
+static u8 root_hub_des[] = {
+        0x09, /* blength */
+        0x29, /* bDescriptorType;hub-descriptor */
+        0x01, /* bNbrPorts */
+        0x00, /* wHubCharacteristics */
+        0x00,
+        0x01, /* bPwrOn2pwrGood;2ms */
+        0x00, /* bHubContrCurrent;0mA */
+        0x00, /* DeviceRemoveable */
+        0xff, /* PortPwrCtrlMask */
+};
+
+static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on)
+{
+        int gpio = fhci->gpios[gpio_nr];
+        bool alow = fhci->alow_gpios[gpio_nr];
+
+        if (!gpio_is_valid(gpio))
+                return;
+
+        gpio_set_value(gpio, on ^ alow);
+        mdelay(5);
+}
+
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+                             enum fhci_port_status status)
+{
+        fhci_dbg(fhci, "-> %s: %d\n", __func__, status);
+
+        switch (status) {
+        case FHCI_PORT_POWER_OFF:
+                fhci_gpio_set_value(fhci, GPIO_POWER, false);
+                break;
+        case FHCI_PORT_DISABLED:
+        case FHCI_PORT_WAITING:
+                fhci_gpio_set_value(fhci, GPIO_POWER, true);
+                break;
+        case FHCI_PORT_LOW:
+                fhci_gpio_set_value(fhci, GPIO_SPEED, false);
+                break;
+        case FHCI_PORT_FULL:
+                fhci_gpio_set_value(fhci, GPIO_SPEED, true);
+                break;
+        default:
+                WARN_ON(1);
+                break;
+        }
+
+        fhci_dbg(fhci, "<- %s: %d\n", __func__, status);
+}
+
+/* disable the USB port by clearing the EN bit in the USBMOD register */
+void fhci_port_disable(struct fhci_hcd *fhci)
+{
+        struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld;
+        enum fhci_port_status port_status;
+
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        fhci_stop_sof_timer(fhci);
+
+        fhci_flush_all_transmissions(usb);
+
+        fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld);
+        port_status = usb->port_status;
+        usb->port_status = FHCI_PORT_DISABLED;
+
+        /* Enable IDLE since we want to know if something comes along */
+        usb->saved_msk |= USB_E_IDLE_MASK;
+        out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+        /* check if during the disconnection process attached new device */
+        if (port_status == FHCI_PORT_WAITING)
+                fhci_device_connected_interrupt(fhci);
+        usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+        usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+        fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld);
+
+        fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* enable the USB port by setting the EN bit in the USBMOD register */
+void fhci_port_enable(void *lld)
+{
+        struct fhci_usb *usb = (struct fhci_usb *)lld;
+        struct fhci_hcd *fhci = usb->fhci;
+
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        fhci_config_transceiver(fhci, usb->port_status);
+
+        if ((usb->port_status != FHCI_PORT_FULL) &&
+                        (usb->port_status != FHCI_PORT_LOW))
+                fhci_start_sof_timer(fhci);
+
+        usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE;
+        usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+
+        fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci)
+{
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        gpio_direction_output(fhci->gpios[GPIO_USBOE], 0);
+        gpio_direction_output(fhci->gpios[GPIO_USBTP], 0);
+        gpio_direction_output(fhci->gpios[GPIO_USBTN], 0);
+
+        mdelay(5);
+
+        qe_pin_set_dedicated(fhci->pins[PIN_USBOE]);
+        qe_pin_set_dedicated(fhci->pins[PIN_USBTP]);
+        qe_pin_set_dedicated(fhci->pins[PIN_USBTN]);
+
+        fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* generate the RESET condition on the bus */
+void fhci_port_reset(void *lld)
+{
+        struct fhci_usb *usb = (struct fhci_usb *)lld;
+        struct fhci_hcd *fhci = usb->fhci;
+        u8 mode;
+        u16 mask;
+
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        fhci_stop_sof_timer(fhci);
+        /* disable the USB controller */
+        mode = in_8(&fhci->regs->usb_mod);
+        out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN));
+
+        /* disable idle interrupts */
+        mask = in_be16(&fhci->regs->usb_mask);
+        out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK));
+
+        fhci_io_port_generate_reset(fhci);
+
+        /* enable interrupt on this endpoint */
+        out_be16(&fhci->regs->usb_mask, mask);
+
+        /* enable the USB controller */
+        mode = in_8(&fhci->regs->usb_mod);
+        out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN);
+        fhci_start_sof_timer(fhci);
+
+        fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+        int ret = 0;
+        unsigned long flags;
+
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        spin_lock_irqsave(&fhci->lock, flags);
+
+        if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION |
+                        USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND |
+                        USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) {
+                *buf = 1 << 1;
+                ret = 1;
+                fhci_dbg(fhci, "-- %s\n", __func__);
+        }
+
+        spin_unlock_irqrestore(&fhci->lock, flags);
+
+        fhci_dbg(fhci, "<- %s\n", __func__);
+
+        return ret;
+}
+
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+                            u16 wIndex, char *buf, u16 wLength)
+{
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+        int retval = 0;
+        int len = 0;
+        struct usb_hub_status *hub_status;
+        struct usb_port_status *port_status;
+        unsigned long flags;
+
+        spin_lock_irqsave(&fhci->lock, flags);
+
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        switch (typeReq) {
+        case ClearHubFeature:
+                switch (wValue) {
+                case C_HUB_LOCAL_POWER:
+                case C_HUB_OVER_CURRENT:
+                        break;
+                default:
+                        goto error;
+                }
+                break;
+        case ClearPortFeature:
+                fhci->vroot_hub->feature &= (1 << wValue);
+
+                switch (wValue) {
+                case USB_PORT_FEAT_ENABLE:
+                        fhci->vroot_hub->port.wPortStatus &=
+                            ~USB_PORT_STAT_ENABLE;
+                        fhci_port_disable(fhci);
+                        break;
+                case USB_PORT_FEAT_C_ENABLE:
+                        fhci->vroot_hub->port.wPortChange &=
+                            ~USB_PORT_STAT_C_ENABLE;
+                        break;
+                case USB_PORT_FEAT_SUSPEND:
+                        fhci->vroot_hub->port.wPortStatus &=
+                            ~USB_PORT_STAT_SUSPEND;
+                        fhci_stop_sof_timer(fhci);
+                        break;
+                case USB_PORT_FEAT_C_SUSPEND:
+                        fhci->vroot_hub->port.wPortChange &=
+                            ~USB_PORT_STAT_C_SUSPEND;
+                        break;
+                case USB_PORT_FEAT_POWER:
+                        fhci->vroot_hub->port.wPortStatus &=
+                            ~USB_PORT_STAT_POWER;
+                        fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+                        break;
+                case USB_PORT_FEAT_C_CONNECTION:
+                        fhci->vroot_hub->port.wPortChange &=
+                            ~USB_PORT_STAT_C_CONNECTION;
+                        break;
+                case USB_PORT_FEAT_C_OVER_CURRENT:
+                        fhci->vroot_hub->port.wPortChange &=
+                            ~USB_PORT_STAT_C_OVERCURRENT;
+                        break;
+                case USB_PORT_FEAT_C_RESET:
+                        fhci->vroot_hub->port.wPortChange &=
+                            ~USB_PORT_STAT_C_RESET;
+                        break;
+                default:
+                        goto error;
+                }
+                break;
+        case GetHubDescriptor:
+                memcpy(buf, root_hub_des, sizeof(root_hub_des));
+                buf[3] = 0x11; /* per-port power, no ovrcrnt */
+                len = (buf[0] < wLength) ? buf[0] : wLength;
+                break;
+        case GetHubStatus:
+                hub_status = (struct usb_hub_status *)buf;
+                hub_status->wHubStatus =
+                    cpu_to_le16(fhci->vroot_hub->hub.wHubStatus);
+                hub_status->wHubChange =
+                    cpu_to_le16(fhci->vroot_hub->hub.wHubChange);
+                len = 4;
+                break;
+        case GetPortStatus:
+                port_status = (struct usb_port_status *)buf;
+                port_status->wPortStatus =
+                    cpu_to_le16(fhci->vroot_hub->port.wPortStatus);
+                port_status->wPortChange =
+                    cpu_to_le16(fhci->vroot_hub->port.wPortChange);
+                len = 4;
+                break;
+        case SetHubFeature:
+                switch (wValue) {
+                case C_HUB_OVER_CURRENT:
+                case C_HUB_LOCAL_POWER:
+                        break;
+                default:
+                        goto error;
+                }
+                break;
+        case SetPortFeature:
+                fhci->vroot_hub->feature |= (1 << wValue);
+
+                switch (wValue) {
+                case USB_PORT_FEAT_ENABLE:
+                        fhci->vroot_hub->port.wPortStatus |=
+                            USB_PORT_STAT_ENABLE;
+                        fhci_port_enable(fhci->usb_lld);
+                        break;
+                case USB_PORT_FEAT_SUSPEND:
+                        fhci->vroot_hub->port.wPortStatus |=
+                            USB_PORT_STAT_SUSPEND;
+                        fhci_stop_sof_timer(fhci);
+                        break;
+                case USB_PORT_FEAT_RESET:
+                        fhci->vroot_hub->port.wPortStatus |=
+                            USB_PORT_STAT_RESET;
+                        fhci_port_reset(fhci->usb_lld);
+                        fhci->vroot_hub->port.wPortStatus |=
+                            USB_PORT_STAT_ENABLE;
+                        fhci->vroot_hub->port.wPortStatus &=
+                            ~USB_PORT_STAT_RESET;
+                        break;
+                case USB_PORT_FEAT_POWER:
+                        fhci->vroot_hub->port.wPortStatus |=
+                            USB_PORT_STAT_POWER;
+                        fhci_config_transceiver(fhci, FHCI_PORT_WAITING);
+                        break;
+                default:
+                        goto error;
+                }
+                break;
+        default:
+error:
+                retval = -EPIPE;
+        }
+
+        fhci_dbg(fhci, "<- %s\n", __func__);
+
+        spin_unlock_irqrestore(&fhci->lock, flags);
+
+        return retval;
+}
diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c
new file mode 100644
index 000000000000..2c0736c99712
--- /dev/null
+++ b/drivers/usb/host/fhci-mem.c
@@ -0,0 +1,113 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void init_td(struct td *td)
+{
+        memset(td, 0, sizeof(*td));
+        INIT_LIST_HEAD(&td->node);
+        INIT_LIST_HEAD(&td->frame_lh);
+}
+
+static void init_ed(struct ed *ed)
+{
+        memset(ed, 0, sizeof(*ed));
+        INIT_LIST_HEAD(&ed->td_list);
+        INIT_LIST_HEAD(&ed->node);
+}
+
+static struct td *get_empty_td(struct fhci_hcd *fhci)
+{
+        struct td *td;
+
+        if (!list_empty(&fhci->empty_tds)) {
+                td = list_entry(fhci->empty_tds.next, struct td, node);
+                list_del(fhci->empty_tds.next);
+        } else {
+                td = kmalloc(sizeof(*td), GFP_ATOMIC);
+                if (!td)
+                        fhci_err(fhci, "No memory to allocate to TD\n");
+                else
+                        init_td(td);
+        }
+
+        return td;
+}
+
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td)
+{
+        init_td(td);
+        list_add(&td->node, &fhci->empty_tds);
+}
+
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci)
+{
+        struct ed *ed;
+
+        if (!list_empty(&fhci->empty_eds)) {
+                ed = list_entry(fhci->empty_eds.next, struct ed, node);
+                list_del(fhci->empty_eds.next);
+        } else {
+                ed = kmalloc(sizeof(*ed), GFP_ATOMIC);
+                if (!ed)
+                        fhci_err(fhci, "No memory to allocate to ED\n");
+                else
+                        init_ed(ed);
+        }
+
+        return ed;
+}
+
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed)
+{
+        init_ed(ed);
+        list_add(&ed->node, &fhci->empty_eds);
+}
+
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+                        struct urb_priv *urb_priv, struct ed *ed, u16 index,
+                        enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+                        u16 interval, u16 start_frame, bool ioc)
+{
+        struct td *td = get_empty_td(fhci);
+
+        if (!td)
+                return NULL;
+
+        td->urb = urb;
+        td->ed = ed;
+        td->type = type;
+        td->toggle = toggle;
+        td->data = data;
+        td->len = len;
+        td->iso_index = index;
+        td->interval = interval;
+        td->start_frame = start_frame;
+        td->ioc = ioc;
+        td->status = USB_TD_OK;
+
+        urb_priv->tds[index] = td;
+
+        return td;
+}
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
new file mode 100644
index 000000000000..b0a1446ba292
--- /dev/null
+++ b/drivers/usb/host/fhci-q.c
@@ -0,0 +1,284 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* maps the hardware error code to the USB error code */
+static int status_to_error(u32 status)
+{
+        if (status == USB_TD_OK)
+                return 0;
+        else if (status & USB_TD_RX_ER_CRC)
+                return -EILSEQ;
+        else if (status & USB_TD_RX_ER_NONOCT)
+                return -EPROTO;
+        else if (status & USB_TD_RX_ER_OVERUN)
+                return -ECOMM;
+        else if (status & USB_TD_RX_ER_BITSTUFF)
+                return -EPROTO;
+        else if (status & USB_TD_RX_ER_PID)
+                return -EILSEQ;
+        else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT))
+                return -ETIMEDOUT;
+        else if (status & USB_TD_TX_ER_STALL)
+                return -EPIPE;
+        else if (status & USB_TD_TX_ER_UNDERUN)
+                return -ENOSR;
+        else if (status & USB_TD_RX_DATA_UNDERUN)
+                return -EREMOTEIO;
+        else if (status & USB_TD_RX_DATA_OVERUN)
+                return -EOVERFLOW;
+        else
+                return -EINVAL;
+}
+
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td)
+{
+        list_add_tail(&td->frame_lh, &frame->tds_list);
+}
+
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number)
+{
+        int i;
+
+        for (i = 0; i < number; i++) {
+                struct td *td = td_list[i];
+                list_add_tail(&td->node, &ed->td_list);
+        }
+        if (ed->td_head == NULL)
+                ed->td_head = td_list[0];
+}
+
+static struct td *peek_td_from_ed(struct ed *ed)
+{
+        struct td *td;
+
+        if (!list_empty(&ed->td_list))
+                td = list_entry(ed->td_list.next, struct td, node);
+        else
+                td = NULL;
+
+        return td;
+}
+
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame)
+{
+        struct td *td;
+
+        if (!list_empty(&frame->tds_list)) {
+                td = list_entry(frame->tds_list.next, struct td, frame_lh);
+                list_del_init(frame->tds_list.next);
+        } else
+                td = NULL;
+
+        return td;
+}
+
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame)
+{
+        struct td *td;
+
+        if (!list_empty(&frame->tds_list))
+                td = list_entry(frame->tds_list.next, struct td, frame_lh);
+        else
+                td = NULL;
+
+        return td;
+}
+
+struct td *fhci_remove_td_from_ed(struct ed *ed)
+{
+        struct td *td;
+
+        if (!list_empty(&ed->td_list)) {
+                td = list_entry(ed->td_list.next, struct td, node);
+                list_del_init(ed->td_list.next);
+
+                /* if this TD was the ED's head, find next TD */
+                if (!list_empty(&ed->td_list))
+                        ed->td_head = list_entry(ed->td_list.next, struct td,
+                                                 node);
+                else
+                        ed->td_head = NULL;
+        } else
+                td = NULL;
+
+        return td;
+}
+
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list)
+{
+        struct td *td;
+
+        if (!list_empty(&p_list->done_list)) {
+                td = list_entry(p_list->done_list.next, struct td, node);
+                list_del_init(p_list->done_list.next);
+        } else
+                td = NULL;
+
+        return td;
+}
+
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed)
+{
+        struct td *td;
+
+        td = ed->td_head;
+        list_del_init(&td->node);
+
+        /* If this TD was the ED's head,find next TD */
+        if (!list_empty(&ed->td_list))
+                ed->td_head = list_entry(ed->td_list.next, struct td, node);
+        else {
+                ed->td_head = NULL;
+                ed->state = FHCI_ED_SKIP;
+        }
+        ed->toggle_carry = td->toggle;
+        list_add_tail(&td->node, &usb->hc_list->done_list);
+        if (td->ioc)
+                usb->transfer_confirm(usb->fhci);
+}
+
+/* free done FHCI URB resource such as ED and TD */
+static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb)
+{
+        int i;
+        struct urb_priv *urb_priv = urb->hcpriv;
+        struct ed *ed = urb_priv->ed;
+
+        for (i = 0; i < urb_priv->num_of_tds; i++) {
+                list_del_init(&urb_priv->tds[i]->node);
+                fhci_recycle_empty_td(fhci, urb_priv->tds[i]);
+        }
+
+        /* if this TD was the ED's head,find the next TD */
+        if (!list_empty(&ed->td_list))
+                ed->td_head = list_entry(ed->td_list.next, struct td, node);
+        else
+                ed->td_head = NULL;
+
+        kfree(urb_priv->tds);
+        kfree(urb_priv);
+        urb->hcpriv = NULL;
+
+        /* if this TD was the ED's head,find next TD */
+        if (ed->td_head == NULL)
+                list_del_init(&ed->node);
+        fhci->active_urbs--;
+}
+
+/* this routine called to complete and free done URB */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb)
+{
+        free_urb_priv(fhci, urb);
+
+        if (urb->status == -EINPROGRESS) {
+                if (urb->actual_length != urb->transfer_buffer_length &&
+                                urb->transfer_flags & URB_SHORT_NOT_OK)
+                        urb->status = -EREMOTEIO;
+                else
+                        urb->status = 0;
+        }
+
+        usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb);
+
+        spin_unlock(&fhci->lock);
+
+        usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status);
+
+        spin_lock(&fhci->lock);
+}
+
+/*
+ * caculate transfer length/stats and update the urb
+ * Precondition: irqsafe(only for urb-?status locking)
+ */
+void fhci_done_td(struct urb *urb, struct td *td)
+{
+        struct ed *ed = td->ed;
+        u32 cc = td->status;
+
+        /* ISO...drivers see per-TD length/status */
+        if (ed->mode == FHCI_TF_ISO) {
+                u32 len;
+                if (!(urb->transfer_flags & URB_SHORT_NOT_OK &&
+                                cc == USB_TD_RX_DATA_UNDERUN))
+                        cc = USB_TD_OK;
+
+                if (usb_pipeout(urb->pipe))
+                        len = urb->iso_frame_desc[td->iso_index].length;
+                else
+                        len = td->actual_len;
+
+                urb->actual_length += len;
+                urb->iso_frame_desc[td->iso_index].actual_length = len;
+                urb->iso_frame_desc[td->iso_index].status =
+                        status_to_error(cc);
+        }
+
+        /* BULK,INT,CONTROL... drivers see aggregate length/status,
+         * except that "setup" bytes aren't counted and "short" transfers
+         * might not be reported as errors.
+         */
+        else {
+                if (td->error_cnt >= 3)
+                        urb->error_count = 3;
+
+                /* control endpoint only have soft stalls */
+
+                /* update packet status if needed(short may be ok) */
+                if (!(urb->transfer_flags & URB_SHORT_NOT_OK) &&
+                                cc == USB_TD_RX_DATA_UNDERUN) {
+                        ed->state = FHCI_ED_OPER;
+                        cc = USB_TD_OK;
+                }
+                if (cc != USB_TD_OK) {
+                        if (urb->status == -EINPROGRESS)
+                                urb->status = status_to_error(cc);
+                }
+
+                /* count all non-empty packets except control SETUP packet */
+                if (td->type != FHCI_TA_SETUP || td->iso_index != 0)
+                        urb->actual_length += td->actual_len;
+        }
+}
+
+/* there are some pedning request to unlink */
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed)
+{
+        struct td *td = peek_td_from_ed(ed);
+        struct urb *urb = td->urb;
+        struct urb_priv *urb_priv = urb->hcpriv;
+
+        if (urb_priv->state == URB_DEL) {
+                td = fhci_remove_td_from_ed(ed);
+                /* HC may have partly processed this TD */
+                if (td->status != USB_TD_INPROGRESS)
+                        fhci_done_td(urb, td);
+
+                /* URB is done;clean up */
+                if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds)
+                        fhci_urb_complete_free(fhci, urb);
+        }
+}
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
new file mode 100644
index 000000000000..bb63b68ddb77
--- /dev/null
+++ b/drivers/usb/host/fhci-sched.c
@@ -0,0 +1,888 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void recycle_frame(struct fhci_usb *usb, struct packet *pkt)
+{
+        pkt->data = NULL;
+        pkt->len = 0;
+        pkt->status = USB_TD_OK;
+        pkt->info = 0;
+        pkt->priv_data = NULL;
+
+        cq_put(usb->ep0->empty_frame_Q, pkt);
+}
+
+/* confirm submitted packet */
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt)
+{
+        struct td *td;
+        struct packet *td_pkt;
+        struct ed *ed;
+        u32 trans_len;
+        bool td_done = false;
+
+        td = fhci_remove_td_from_frame(usb->actual_frame);
+        td_pkt = td->pkt;
+        trans_len = pkt->len;
+        td->status = pkt->status;
+        if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) {
+                if ((td->data + td->actual_len) && trans_len)
+                        memcpy(td->data + td->actual_len, pkt->data,
+                               trans_len);
+                cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+        }
+
+        recycle_frame(usb, pkt);
+
+        ed = td->ed;
+        if (ed->mode == FHCI_TF_ISO) {
+                if (ed->td_list.next->next != &ed->td_list) {
+                        struct td *td_next =
+                            list_entry(ed->td_list.next->next, struct td,
+                                       node);
+
+                        td_next->start_frame = usb->actual_frame->frame_num;
+                }
+                td->actual_len = trans_len;
+                td_done = true;
+        } else if ((td->status & USB_TD_ERROR) &&
+                        !(td->status & USB_TD_TX_ER_NAK)) {
+                /*
+                 * There was an error on the transaction (but not NAK).
+                 * If it is fatal error (data underrun, stall, bad pid or 3
+                 * errors exceeded), mark this TD as done.
+                 */
+                if ((td->status & USB_TD_RX_DATA_UNDERUN) ||
+                                (td->status & USB_TD_TX_ER_STALL) ||
+                                (td->status & USB_TD_RX_ER_PID) ||
+                                (++td->error_cnt >= 3)) {
+                        ed->state = FHCI_ED_HALTED;
+                        td_done = true;
+
+                        if (td->status & USB_TD_RX_DATA_UNDERUN) {
+                                fhci_dbg(usb->fhci, "td err fu\n");
+                                td->toggle = !td->toggle;
+                                td->actual_len += trans_len;
+                        } else {
+                                fhci_dbg(usb->fhci, "td err f!u\n");
+                        }
+                } else {
+                        fhci_dbg(usb->fhci, "td err !f\n");
+                        /* it is not a fatal error -retry this transaction */
+                        td->nak_cnt = 0;
+                        td->error_cnt++;
+                        td->status = USB_TD_OK;
+                }
+        } else if (td->status & USB_TD_TX_ER_NAK) {
+                /* there was a NAK response */
+                fhci_vdbg(usb->fhci, "td nack\n");
+                td->nak_cnt++;
+                td->error_cnt = 0;
+                td->status = USB_TD_OK;
+        } else {
+                /* there was no error on transaction */
+                td->error_cnt = 0;
+                td->nak_cnt = 0;
+                td->toggle = !td->toggle;
+                td->actual_len += trans_len;
+
+                if (td->len == td->actual_len)
+                        td_done = true;
+        }
+
+        if (td_done)
+                fhci_move_td_from_ed_to_done_list(usb, ed);
+}
+
+/*
+ * Flush all transmitted packets from BDs
+ * This routine is called when disabling the USB port to flush all
+ * transmissions that are allready scheduled in the BDs
+ */
+void fhci_flush_all_transmissions(struct fhci_usb *usb)
+{
+        u8 mode;
+        struct td *td;
+
+        mode = in_8(&usb->fhci->regs->usb_mod);
+        clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+        fhci_flush_bds(usb);
+
+        while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) {
+                struct packet *pkt = td->pkt;
+
+                pkt->status = USB_TD_TX_ER_TIMEOUT;
+                fhci_transaction_confirm(usb, pkt);
+        }
+
+        usb->actual_frame->frame_status = FRAME_END_TRANSMISSION;
+
+        /* reset the event register */
+        out_be16(&usb->fhci->regs->usb_event, 0xffff);
+        /* enable the USB controller */
+        out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/*
+ * This function forms the packet and transmit the packet. This function
+ * will handle all endpoint type:ISO,interrupt,control and bulk
+ */
+static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td)
+{
+        u32 fw_transaction_time, len = 0;
+        struct packet *pkt;
+        u8 *data = NULL;
+
+        /* calcalate data address,len and toggle and then add the transaction */
+        if (td->toggle == USB_TD_TOGGLE_CARRY)
+                td->toggle = ed->toggle_carry;
+
+        switch (ed->mode) {
+        case FHCI_TF_ISO:
+                len = td->len;
+                if (td->type != FHCI_TA_IN)
+                        data = td->data;
+                break;
+        case FHCI_TF_CTRL:
+        case FHCI_TF_BULK:
+                len = min(td->len - td->actual_len, ed->max_pkt_size);
+                if (!((td->type == FHCI_TA_IN) &&
+                      ((len + td->actual_len) == td->len)))
+                        data = td->data + td->actual_len;
+                break;
+        case FHCI_TF_INTR:
+                len = min(td->len, ed->max_pkt_size);
+                if (!((td->type == FHCI_TA_IN) &&
+                      ((td->len + CRC_SIZE) >= ed->max_pkt_size)))
+                        data = td->data;
+                break;
+        default:
+                break;
+        }
+
+        if (usb->port_status == FHCI_PORT_FULL)
+                fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4);
+        else
+                fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6);
+
+        /* check if there's enough space in this frame to submit this TD */
+        if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >=
+                        usb->max_bytes_per_frame) {
+                fhci_vdbg(usb->fhci, "not enough space in this frame: "
+                          "%d %d %d\n", usb->actual_frame->total_bytes, len,
+                          usb->max_bytes_per_frame);
+                return -1;
+        }
+
+        /* check if there's enough time in this frame to submit this TD */
+        if (usb->actual_frame->frame_status != FRAME_IS_PREPARED &&
+            (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION ||
+             (fw_transaction_time + usb->sw_transaction_time >=
+              1000 - fhci_get_sof_timer_count(usb)))) {
+                fhci_dbg(usb->fhci, "not enough time in this frame\n");
+                return -1;
+        }
+
+        /* update frame object fields before transmitting */
+        pkt = cq_get(usb->ep0->empty_frame_Q);
+        if (!pkt) {
+                fhci_dbg(usb->fhci, "there is no empty frame\n");
+                return -1;
+        }
+        td->pkt = pkt;
+
+        pkt->info = 0;
+        if (data == NULL) {
+                data = cq_get(usb->ep0->dummy_packets_Q);
+                BUG_ON(!data);
+                pkt->info = PKT_DUMMY_PACKET;
+        }
+        pkt->data = data;
+        pkt->len = len;
+        pkt->status = USB_TD_OK;
+        /* update TD status field before transmitting */
+        td->status = USB_TD_INPROGRESS;
+        /* update actual frame time object with the actual transmission */
+        usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD);
+        fhci_add_td_to_frame(usb->actual_frame, td);
+
+        if (usb->port_status != FHCI_PORT_FULL &&
+                        usb->port_status != FHCI_PORT_LOW) {
+                pkt->status = USB_TD_TX_ER_TIMEOUT;
+                pkt->len = 0;
+                fhci_transaction_confirm(usb, pkt);
+        } else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr,
+                        ed->ep_addr, ed->mode, ed->speed, td->toggle)) {
+                /* remove TD from actual frame */
+                list_del_init(&td->frame_lh);
+                td->status = USB_TD_OK;
+                if (pkt->info & PKT_DUMMY_PACKET)
+                        cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+                recycle_frame(usb, pkt);
+                usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD);
+                fhci_err(usb->fhci, "host transaction failed\n");
+                return -1;
+        }
+
+        return len;
+}
+
+static void move_head_to_tail(struct list_head *list)
+{
+        struct list_head *node = list->next;
+
+        if (!list_empty(list)) {
+                list_del(node);
+                list_add_tail(node, list);
+        }
+}
+
+/*
+ * This function goes through the endpoint list and schedules the
+ * transactions within this list
+ */
+static int scan_ed_list(struct fhci_usb *usb,
+                        struct list_head *list, enum fhci_tf_mode list_type)
+{
+        static const int frame_part[4] = {
+                [FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME,
+                [FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME *
+                                 MAX_PERIODIC_FRAME_USAGE) / 100,
+                [FHCI_TF_BULK] = MAX_BYTES_PER_FRAME,
+                [FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME *
+                                  MAX_PERIODIC_FRAME_USAGE) / 100
+        };
+        struct ed *ed;
+        struct td *td;
+        int ans = 1;
+        u32 save_transaction_time = usb->sw_transaction_time;
+
+        list_for_each_entry(ed, list, node) {
+                td = ed->td_head;
+
+                if (!td || (td && td->status == USB_TD_INPROGRESS))
+                        continue;
+
+                if (ed->state != FHCI_ED_OPER) {
+                        if (ed->state == FHCI_ED_URB_DEL) {
+                                td->status = USB_TD_OK;
+                                fhci_move_td_from_ed_to_done_list(usb, ed);
+                                ed->state = FHCI_ED_SKIP;
+                        }
+                        continue;
+                }
+
+                /*
+                 * if it isn't interrupt pipe or it is not iso pipe and the
+                 * interval time passed
+                 */
+                if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) &&
+                                (((usb->actual_frame->frame_num -
+                                   td->start_frame) & 0x7ff) < td->interval))
+                        continue;
+
+                if (add_packet(usb, ed, td) < 0)
+                        continue;
+
+                /* update time stamps in the TD */
+                td->start_frame = usb->actual_frame->frame_num;
+                usb->sw_transaction_time += save_transaction_time;
+
+                if (usb->actual_frame->total_bytes >=
+                                        usb->max_bytes_per_frame) {
+                        usb->actual_frame->frame_status =
+                                FRAME_DATA_END_TRANSMISSION;
+                        fhci_push_dummy_bd(usb->ep0);
+                        ans = 0;
+                        break;
+                }
+
+                if (usb->actual_frame->total_bytes >= frame_part[list_type])
+                        break;
+        }
+
+        /* be fair to each ED(move list head around) */
+        move_head_to_tail(list);
+        usb->sw_transaction_time = save_transaction_time;
+
+        return ans;
+}
+
+static u32 rotate_frames(struct fhci_usb *usb)
+{
+        struct fhci_hcd *fhci = usb->fhci;
+
+        if (!list_empty(&usb->actual_frame->tds_list)) {
+                if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) -
+                      usb->actual_frame->frame_num) & 0x7ff) > 5)
+                        fhci_flush_actual_frame(usb);
+                else
+                        return -EINVAL;
+        }
+
+        usb->actual_frame->frame_status = FRAME_IS_PREPARED;
+        usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff;
+        usb->actual_frame->total_bytes = 0;
+
+        return 0;
+}
+
+/*
+ * This function schedule the USB transaction and will process the
+ * endpoint in the following order: iso, interrupt, control and bulk.
+ */
+void fhci_schedule_transactions(struct fhci_usb *usb)
+{
+        int left = 1;
+
+        if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+                if (rotate_frames(usb) != 0)
+                        return;
+
+        if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+                return;
+
+        if (usb->actual_frame->total_bytes == 0) {
+                /*
+                 * schedule the next available ISO transfer
+                 *or next stage of the ISO transfer
+                 */
+                scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO);
+
+                /*
+                 * schedule the next available interrupt transfer or
+                 * the next stage of the interrupt transfer
+                 */
+                scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR);
+
+                /*
+                 * schedule the next available control transfer
+                 * or the next stage of the control transfer
+                 */
+                left = scan_ed_list(usb, &usb->hc_list->ctrl_list,
+                                    FHCI_TF_CTRL);
+        }
+
+        /*
+         * schedule the next available bulk transfer or the next stage of the
+         * bulk transfer
+         */
+        if (left > 0)
+                scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK);
+}
+
+/* Handles SOF interrupt */
+static void sof_interrupt(struct fhci_hcd *fhci)
+{
+        struct fhci_usb *usb = fhci->usb_lld;
+
+        if ((usb->port_status == FHCI_PORT_DISABLED) &&
+            (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) &&
+            !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) {
+                if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED)
+                        usb->port_status = FHCI_PORT_LOW;
+                else
+                        usb->port_status = FHCI_PORT_FULL;
+                /* Disable IDLE */
+                usb->saved_msk &= ~USB_E_IDLE_MASK;
+                out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+        }
+
+        gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false);
+
+        fhci_host_transmit_actual_frame(usb);
+        usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED;
+
+        fhci_schedule_transactions(usb);
+}
+
+/* Handles device disconnected interrupt on port */
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci)
+{
+        struct fhci_usb *usb = fhci->usb_lld;
+
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        fhci_usb_disable_interrupt(usb);
+        clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+        usb->port_status = FHCI_PORT_DISABLED;
+
+        fhci_stop_sof_timer(fhci);
+
+        /* Enable IDLE since we want to know if something comes along */
+        usb->saved_msk |= USB_E_IDLE_MASK;
+        out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+        usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION;
+        usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+        usb->max_bytes_per_frame = 0;
+        fhci_usb_enable_interrupt(usb);
+
+        fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* detect a new device connected on the USB port */
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci)
+{
+
+        struct fhci_usb *usb = fhci->usb_lld;
+        int state;
+        int ret;
+
+        fhci_dbg(fhci, "-> %s\n", __func__);
+
+        fhci_usb_disable_interrupt(usb);
+        state = fhci_ioports_check_bus_state(fhci);
+
+        /* low-speed device was connected to the USB port */
+        if (state == 1) {
+                ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+                if (ret) {
+                        fhci_warn(fhci, "Low-Speed device is not supported, "
+                                  "try use BRGx\n");
+                        goto out;
+                }
+
+                usb->port_status = FHCI_PORT_LOW;
+                setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+                usb->vroot_hub->port.wPortStatus |=
+                    (USB_PORT_STAT_LOW_SPEED |
+                     USB_PORT_STAT_CONNECTION);
+                usb->vroot_hub->port.wPortChange |=
+                    USB_PORT_STAT_C_CONNECTION;
+                usb->max_bytes_per_frame =
+                    (MAX_BYTES_PER_FRAME >> 3) - 7;
+                fhci_port_enable(usb);
+        } else if (state == 2) {
+                ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+                if (ret) {
+                        fhci_warn(fhci, "Full-Speed device is not supported, "
+                                  "try use CLKx\n");
+                        goto out;
+                }
+
+                usb->port_status = FHCI_PORT_FULL;
+                clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+                usb->vroot_hub->port.wPortStatus &=
+                    ~USB_PORT_STAT_LOW_SPEED;
+                usb->vroot_hub->port.wPortStatus |=
+                    USB_PORT_STAT_CONNECTION;
+                usb->vroot_hub->port.wPortChange |=
+                    USB_PORT_STAT_C_CONNECTION;
+                usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15);
+                fhci_port_enable(usb);
+        }
+out:
+        fhci_usb_enable_interrupt(usb);
+        fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd)
+{
+        struct usb_hcd *hcd = _hcd;
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+        struct fhci_usb *usb = fhci->usb_lld;
+
+        spin_lock(&fhci->lock);
+
+        gtm_set_exact_timer16(fhci->timer, 1000, false);
+
+        if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) {
+                usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+                fhci_push_dummy_bd(usb->ep0);
+        }
+
+        fhci_schedule_transactions(usb);
+
+        spin_unlock(&fhci->lock);
+
+        return IRQ_HANDLED;
+}
+
+/* Cancel transmission on the USB endpoint */
+static void abort_transmission(struct fhci_usb *usb)
+{
+        fhci_dbg(usb->fhci, "-> %s\n", __func__);
+        /* issue stop Tx command */
+        qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+        /* flush Tx FIFOs */
+        out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO);
+        udelay(1000);
+        /* reset Tx BDs */
+        fhci_flush_bds(usb);
+        /* issue restart Tx command */
+        qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+        fhci_dbg(usb->fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_irq(struct usb_hcd *hcd)
+{
+        struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+        struct fhci_usb *usb;
+        u16 usb_er = 0;
+        unsigned long flags;
+
+        spin_lock_irqsave(&fhci->lock, flags);
+
+        usb = fhci->usb_lld;
+
+        usb_er |= in_be16(&usb->fhci->regs->usb_event) &
+                  in_be16(&usb->fhci->regs->usb_mask);
+
+        /* clear event bits for next time */
+        out_be16(&usb->fhci->regs->usb_event, usb_er);
+
+        fhci_dbg_isr(fhci, usb_er);
+
+        if (usb_er & USB_E_RESET_MASK) {
+                if ((usb->port_status == FHCI_PORT_FULL) ||
+                                (usb->port_status == FHCI_PORT_LOW)) {
+                        fhci_device_disconnected_interrupt(fhci);
+                        usb_er &= ~USB_E_IDLE_MASK;
+                } else if (usb->port_status == FHCI_PORT_WAITING) {
+                        usb->port_status = FHCI_PORT_DISCONNECTING;
+
+                        /* Turn on IDLE since we want to disconnect */
+                        usb->saved_msk |= USB_E_IDLE_MASK;
+                        out_be16(&usb->fhci->regs->usb_event,
+                                 usb->saved_msk);
+                } else if (usb->port_status == FHCI_PORT_DISABLED) {
+                        if (fhci_ioports_check_bus_state(fhci) == 1 &&
+                                        usb->port_status != FHCI_PORT_LOW &&
+                                        usb->port_status != FHCI_PORT_FULL)
+                                fhci_device_connected_interrupt(fhci);
+                }
+                usb_er &= ~USB_E_RESET_MASK;
+        }
+
+        if (usb_er & USB_E_MSF_MASK) {
+                abort_transmission(fhci->usb_lld);
+                usb_er &= ~USB_E_MSF_MASK;
+        }
+
+        if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) {
+                sof_interrupt(fhci);
+                usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK);
+        }
+
+        if (usb_er & USB_E_TXB_MASK) {
+                fhci_tx_conf_interrupt(fhci->usb_lld);
+                usb_er &= ~USB_E_TXB_MASK;
+        }
+
+        if (usb_er & USB_E_TXE1_MASK) {
+                fhci_tx_conf_interrupt(fhci->usb_lld);
+                usb_er &= ~USB_E_TXE1_MASK;
+        }
+
+        if (usb_er & USB_E_IDLE_MASK) {
+                if (usb->port_status == FHCI_PORT_DISABLED &&
+                                usb->port_status != FHCI_PORT_LOW &&
+                                usb->port_status != FHCI_PORT_FULL) {
+                        usb_er &= ~USB_E_RESET_MASK;
+                        fhci_device_connected_interrupt(fhci);
+                } else if (usb->port_status ==
+                                FHCI_PORT_DISCONNECTING) {
+                        /* XXX usb->port_status = FHCI_PORT_WAITING; */
+                        /* Disable IDLE */
+                        usb->saved_msk &= ~USB_E_IDLE_MASK;
+                        out_be16(&usb->fhci->regs->usb_mask,
+                                 usb->saved_msk);
+                } else {
+                        fhci_dbg_isr(fhci, -1);
+                }
+
+                usb_er &= ~USB_E_IDLE_MASK;
+        }
+
+        spin_unlock_irqrestore(&fhci->lock, flags);
+
+        return IRQ_HANDLED;
+}
+
+
+/*
+ * Process normal completions(error or sucess) and clean the schedule.
+ *
+ * This is the main path for handing urbs back to drivers. The only other patth
+ * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
+ * the (re-reversed) done list as this does.
+ */
+static void process_done_list(unsigned long data)
+{
+        struct urb *urb;
+        struct ed *ed;
+        struct td *td;
+        struct urb_priv *urb_priv;
+        struct fhci_hcd *fhci = (struct fhci_hcd *)data;
+
+        disable_irq(fhci->timer->irq);
+        disable_irq(fhci_to_hcd(fhci)->irq);
+        spin_lock(&fhci->lock);
+
+        td = fhci_remove_td_from_done_list(fhci->hc_list);
+        while (td != NULL) {
+                urb = td->urb;
+                urb_priv = urb->hcpriv;
+                ed = td->ed;
+
+                /* update URB's length and status from TD */
+                fhci_done_td(urb, td);
+                urb_priv->tds_cnt++;
+
+                /*
+                 * if all this urb's TDs are done, call complete()
+                 * Interrupt transfers are the onley special case:
+                 * they are reissued,until "deleted" by usb_unlink_urb
+                 * (real work done in a SOF intr, by process_del_list)
+                 */
+                if (urb_priv->tds_cnt == urb_priv->num_of_tds) {
+                        fhci_urb_complete_free(fhci, urb);
+                } else if (urb_priv->state == URB_DEL &&
+                                ed->state == FHCI_ED_SKIP) {
+                        fhci_del_ed_list(fhci, ed);
+                        ed->state = FHCI_ED_OPER;
+                } else if (ed->state == FHCI_ED_HALTED) {
+                        urb_priv->state = URB_DEL;
+                        ed->state = FHCI_ED_URB_DEL;
+                        fhci_del_ed_list(fhci, ed);
+                        ed->state = FHCI_ED_OPER;
+                }
+
+                td = fhci_remove_td_from_done_list(fhci->hc_list);
+        }
+
+        spin_unlock(&fhci->lock);
+        enable_irq(fhci->timer->irq);
+        enable_irq(fhci_to_hcd(fhci)->irq);
+}
+
+DECLARE_TASKLET(fhci_tasklet, process_done_list, 0);
+
+/* transfer complted callback */
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci)
+{
+        if (!fhci->process_done_task->state)
+                tasklet_schedule(fhci->process_done_task);
+        return 0;
+}
+
+/*
+ * adds urb to the endpoint descriptor list
+ * arguments:
+ * fhci         data structure for the Low level host controller
+ * ep           USB Host endpoint data structure
+ * urb          USB request block data structure
+ */
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
+{
+        struct ed *ed = urb->ep->hcpriv;
+        struct urb_priv *urb_priv = urb->hcpriv;
+        u32 data_len = urb->transfer_buffer_length;
+        int urb_state = 0;
+        int toggle = 0;
+        struct td *td;
+        u8 *data;
+        u16 cnt = 0;
+
+        if (ed == NULL) {
+                ed = fhci_get_empty_ed(fhci);
+                ed->dev_addr = usb_pipedevice(urb->pipe);
+                ed->ep_addr = usb_pipeendpoint(urb->pipe);
+                switch (usb_pipetype(urb->pipe)) {
+                case PIPE_CONTROL:
+                        ed->mode = FHCI_TF_CTRL;
+                        break;
+                case PIPE_BULK:
+                        ed->mode = FHCI_TF_BULK;
+                        break;
+                case PIPE_INTERRUPT:
+                        ed->mode = FHCI_TF_INTR;
+                        break;
+                case PIPE_ISOCHRONOUS:
+                        ed->mode = FHCI_TF_ISO;
+                        break;
+                default:
+                        break;
+                }
+                ed->speed = (urb->dev->speed == USB_SPEED_LOW) ?
+                        FHCI_LOW_SPEED : FHCI_FULL_SPEED;
+                ed->max_pkt_size = usb_maxpacket(urb->dev,
+                        urb->pipe, usb_pipeout(urb->pipe));
+                urb->ep->hcpriv = ed;
+                fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n",
+                         ed->speed, ed->max_pkt_size);
+        }
+
+        /* for ISO transfer calculate start frame index */
+        if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP)
+                urb->start_frame = ed->td_head ? ed->last_iso + 1 :
+                                                 get_frame_num(fhci);
+
+        /*
+         * OHCI handles the DATA toggle itself,we just use the USB
+         * toggle bits
+         */
+        if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+                          usb_pipeout(urb->pipe)))
+                toggle = USB_TD_TOGGLE_CARRY;
+        else {
+                toggle = USB_TD_TOGGLE_DATA0;
+                usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+                              usb_pipeout(urb->pipe), 1);
+        }
+
+        urb_priv->tds_cnt = 0;
+        urb_priv->ed = ed;
+        if (data_len > 0)
+                data = urb->transfer_buffer;
+        else
+                data = NULL;
+
+        switch (ed->mode) {
+        case FHCI_TF_BULK:
+                if (urb->transfer_flags & URB_ZERO_PACKET &&
+                                urb->transfer_buffer_length > 0 &&
+                                ((urb->transfer_buffer_length %
+                                usb_maxpacket(urb->dev, urb->pipe,
+                                usb_pipeout(urb->pipe))) == 0))
+                        urb_state = US_BULK0;
+                while (data_len > 4096) {
+                        td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+                                usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+                                                         FHCI_TA_IN,
+                                cnt ? USB_TD_TOGGLE_CARRY :
+                                      toggle,
+                                data, 4096, 0, 0, true);
+                        data += 4096;
+                        data_len -= 4096;
+                        cnt++;
+                }
+
+                td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+                        usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+                        cnt ? USB_TD_TOGGLE_CARRY : toggle,
+                        data, data_len, 0, 0, true);
+                cnt++;
+
+                if (urb->transfer_flags & URB_ZERO_PACKET &&
+                                cnt < urb_priv->num_of_tds) {
+                        td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+                                usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+                                                         FHCI_TA_IN,
+                                USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true);
+                        cnt++;
+                }
+                break;
+        case FHCI_TF_INTR:
+                urb->start_frame = get_frame_num(fhci) + 1;
+                td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+                        usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+                        USB_TD_TOGGLE_DATA0, data, data_len,
+                        urb->interval, urb->start_frame, true);
+                break;
+        case FHCI_TF_CTRL:
+                ed->dev_addr = usb_pipedevice(urb->pipe);
+                ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe,
+                        usb_pipeout(urb->pipe));
+                td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
+                        USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
+
+                if (data_len > 0) {
+                        td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+                                usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+                                                         FHCI_TA_IN,
+                                USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
+                                true);
+                }
+                td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+                        usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT,
+                        USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+                urb_state = US_CTRL_SETUP;
+                break;
+        case FHCI_TF_ISO:
+                for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+                        u16 frame = urb->start_frame;
+
+                        /*
+                         * FIXME scheduling should handle frame counter
+                         * roll-around ... exotic case (and OHCI has
+                         * a 2^16 iso range, vs other HCs max of 2^10)
+                         */
+                        frame += cnt * urb->interval;
+                        frame &= 0x07ff;
+                        td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+                                usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+                                                         FHCI_TA_IN,
+                                USB_TD_TOGGLE_DATA0,
+                                data + urb->iso_frame_desc[cnt].offset,
+                                urb->iso_frame_desc[cnt].length,
+                                urb->interval, frame, true);
+                }
+                break;
+        default:
+                break;
+        }
+
+        /*
+         * set the state of URB
+         * control pipe:3 states -- setup,data,status
+         * interrupt and bulk pipe:1 state -- data
+         */
+        urb->pipe &= ~0x1f;
+        urb->pipe |= urb_state & 0x1f;
+
+        urb_priv->state = URB_INPROGRESS;
+
+        if (!ed->td_head) {
+                ed->state = FHCI_ED_OPER;
+                switch (ed->mode) {
+                case FHCI_TF_CTRL:
+                        list_add(&ed->node, &fhci->hc_list->ctrl_list);
+                        break;
+                case FHCI_TF_BULK:
+                        list_add(&ed->node, &fhci->hc_list->bulk_list);
+                        break;
+                case FHCI_TF_INTR:
+                        list_add(&ed->node, &fhci->hc_list->intr_list);
+                        break;
+                case FHCI_TF_ISO:
+                        list_add(&ed->node, &fhci->hc_list->iso_list);
+                        break;
+                default:
+                        break;
+                }
+        }
+
+        fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds);
+        fhci->active_urbs++;
+}
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
new file mode 100644
index 000000000000..b40332290319
--- /dev/null
+++ b/drivers/usb/host/fhci-tds.c
@@ -0,0 +1,626 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+#define DUMMY_BD_BUFFER  0xdeadbeef
+#define DUMMY2_BD_BUFFER 0xbaadf00d
+
+/* Transaction Descriptors bits */
+#define TD_R            0x8000 /* ready bit */
+#define TD_W            0x2000 /* wrap bit */
+#define TD_I            0x1000 /* interrupt on completion */
+#define TD_L            0x0800 /* last */
+#define TD_TC           0x0400 /* transmit CRC */
+#define TD_CNF          0x0200 /* CNF - Must be always 1 */
+#define TD_LSP          0x0100 /* Low-speed transaction */
+#define TD_PID          0x00c0 /* packet id */
+#define TD_RXER         0x0020 /* Rx error or not */
+
+#define TD_NAK          0x0010 /* No ack. */
+#define TD_STAL         0x0008 /* Stall recieved */
+#define TD_TO           0x0004 /* time out */
+#define TD_UN           0x0002 /* underrun */
+#define TD_NO           0x0010 /* Rx Non Octet Aligned Packet */
+#define TD_AB           0x0008 /* Frame Aborted */
+#define TD_CR           0x0004 /* CRC Error */
+#define TD_OV           0x0002 /* Overrun */
+#define TD_BOV          0x0001 /* Buffer Overrun */
+
+#define TD_ERRORS       (TD_NAK | TD_STAL | TD_TO | TD_UN | \
+                         TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV)
+
+#define TD_PID_DATA0    0x0080 /* Data 0 toggle */
+#define TD_PID_DATA1    0x00c0 /* Data 1 toggle */
+#define TD_PID_TOGGLE   0x00c0 /* Data 0/1 toggle mask */
+
+#define TD_TOK_SETUP    0x0000
+#define TD_TOK_OUT      0x4000
+#define TD_TOK_IN       0x8000
+#define TD_ISO          0x1000
+#define TD_ENDP         0x0780
+#define TD_ADDR         0x007f
+
+#define TD_ENDP_SHIFT 7
+
+struct usb_td {
+        __be16 status;
+        __be16 length;
+        __be32 buf_ptr;
+        __be16 extra;
+        __be16 reserved;
+};
+
+static struct usb_td __iomem *next_bd(struct usb_td __iomem *base,
+                                      struct usb_td __iomem *td,
+                                      u16 status)
+{
+        if (status & TD_W)
+                return base;
+        else
+                return ++td;
+}
+
+void fhci_push_dummy_bd(struct endpoint *ep)
+{
+        if (ep->already_pushed_dummy_bd == false) {
+                u16 td_status = in_be16(&ep->empty_td->status);
+
+                out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER);
+                /* get the next TD in the ring */
+                ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+                ep->already_pushed_dummy_bd = true;
+        }
+}
+
+/* destroy an USB endpoint */
+void fhci_ep0_free(struct fhci_usb *usb)
+{
+        struct endpoint *ep;
+        int size;
+
+        ep = usb->ep0;
+        if (ep) {
+                if (ep->td_base)
+                        cpm_muram_free(cpm_muram_offset(ep->td_base));
+
+                if (ep->conf_frame_Q) {
+                        size = cq_howmany(ep->conf_frame_Q);
+                        for (; size; size--) {
+                                struct packet *pkt = cq_get(ep->conf_frame_Q);
+
+                                kfree(pkt);
+                        }
+                        cq_delete(ep->conf_frame_Q);
+                }
+
+                if (ep->empty_frame_Q) {
+                        size = cq_howmany(ep->empty_frame_Q);
+                        for (; size; size--) {
+                                struct packet *pkt = cq_get(ep->empty_frame_Q);
+
+                                kfree(pkt);
+                        }
+                        cq_delete(ep->empty_frame_Q);
+                }
+
+                if (ep->dummy_packets_Q) {
+                        size = cq_howmany(ep->dummy_packets_Q);
+                        for (; size; size--) {
+                                u8 *buff = cq_get(ep->dummy_packets_Q);
+
+                                kfree(buff);
+                        }
+                        cq_delete(ep->dummy_packets_Q);
+                }
+
+                kfree(ep);
+                usb->ep0 = NULL;
+        }
+}
+
+/*
+ * create the endpoint structure
+ *
+ * arguments:
+ * usb          A pointer to the data structure of the USB
+ * data_mem     The data memory partition(BUS)
+ * ring_len     TD ring length
+ */
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+                           u32 ring_len)
+{
+        struct endpoint *ep;
+        struct usb_td __iomem *td;
+        unsigned long ep_offset;
+        char *err_for = "enpoint PRAM";
+        int ep_mem_size;
+        u32 i;
+
+        /* we need at least 3 TDs in the ring */
+        if (!(ring_len > 2)) {
+                fhci_err(usb->fhci, "illegal TD ring length parameters\n");
+                return -EINVAL;
+        }
+
+        ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+        if (!ep)
+                return -ENOMEM;
+
+        ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram);
+        ep_offset = cpm_muram_alloc(ep_mem_size, 32);
+        if (IS_ERR_VALUE(ep_offset))
+                goto err;
+        ep->td_base = cpm_muram_addr(ep_offset);
+
+        /* zero all queue pointers */
+        ep->conf_frame_Q = cq_new(ring_len + 2);
+        ep->empty_frame_Q = cq_new(ring_len + 2);
+        ep->dummy_packets_Q = cq_new(ring_len + 2);
+        if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) {
+                err_for = "frame_queues";
+                goto err;
+        }
+
+        for (i = 0; i < (ring_len + 1); i++) {
+                struct packet *pkt;
+                u8 *buff;
+
+                pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+                if (!pkt) {
+                        err_for = "frame";
+                        goto err;
+                }
+
+                buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL);
+                if (!buff) {
+                        kfree(pkt);
+                        err_for = "buffer";
+                        goto err;
+                }
+                cq_put(ep->empty_frame_Q, pkt);
+                cq_put(ep->dummy_packets_Q, buff);
+        }
+
+        /* we put the endpoint parameter RAM right behind the TD ring */
+        ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len;
+
+        ep->conf_td = ep->td_base;
+        ep->empty_td = ep->td_base;
+
+        ep->already_pushed_dummy_bd = false;
+
+        /* initialize tds */
+        td = ep->td_base;
+        for (i = 0; i < ring_len; i++) {
+                out_be32(&td->buf_ptr, 0);
+                out_be16(&td->status, 0);
+                out_be16(&td->length, 0);
+                out_be16(&td->extra, 0);
+                td++;
+        }
+        td--;
+        out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+        out_be16(&td->length, 0);
+
+        /* endpoint structure has been created */
+        usb->ep0 = ep;
+
+        return 0;
+err:
+        fhci_ep0_free(usb);
+        kfree(ep);
+        fhci_err(usb->fhci, "no memory for the %s\n", err_for);
+        return -ENOMEM;
+}
+
+/*
+ * initialize the endpoint register according to the given parameters
+ *
+ * artuments:
+ * usb          A pointer to the data strucutre of the USB
+ * ep           A pointer to the endpoint structre
+ * data_mem     The data memory partition(BUS)
+ */
+void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
+                            enum fhci_mem_alloc data_mem)
+{
+        u8 rt;
+
+        /* set the endpoint registers according to the endpoint */
+        out_be16(&usb->fhci->regs->usb_ep[0],
+                 USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE);
+        out_be16(&usb->fhci->pram->ep_ptr[0],
+                 cpm_muram_offset(ep->ep_pram_ptr));
+
+        rt = (BUS_MODE_BO_BE | BUS_MODE_GBL);
+#ifdef MULTI_DATA_BUS
+        if (data_mem == MEM_SECONDARY)
+                rt |= BUS_MODE_DTB;
+#endif
+        out_8(&ep->ep_pram_ptr->rx_func_code, rt);
+        out_8(&ep->ep_pram_ptr->tx_func_code, rt);
+        out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028);
+        out_be16(&ep->ep_pram_ptr->rx_base, 0);
+        out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base));
+        out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0);
+        out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base));
+        out_be32(&ep->ep_pram_ptr->tx_state, 0);
+}
+
+/*
+ * Collect the submitted frames and inform the application about them
+ * It is also prepearing the TDs for new frames. If the Tx interrupts
+ * are diabled, the application should call that routine to get
+ * confirmation about the submitted frames. Otherwise, the routine is
+ * called frome the interrupt service routine during the Tx interrupt.
+ * In that case the application is informed by calling the application
+ * specific 'fhci_transaction_confirm' routine
+ */
+static void fhci_td_transaction_confirm(struct fhci_usb *usb)
+{
+        struct endpoint *ep = usb->ep0;
+        struct packet *pkt;
+        struct usb_td __iomem *td;
+        u16 extra_data;
+        u16 td_status;
+        u16 td_length;
+        u32 buf;
+
+        /*
+         * collect transmitted BDs from the chip. The routine clears all BDs
+         * with R bit = 0 and the pointer to data buffer is not NULL, that is
+         * BDs which point to the transmitted data buffer
+         */
+        while (1) {
+                td = ep->conf_td;
+                td_status = in_be16(&td->status);
+                td_length = in_be16(&td->length);
+                buf = in_be32(&td->buf_ptr);
+                extra_data = in_be16(&td->extra);
+
+                /* check if the TD is empty */
+                if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf)))
+                        break;
+                /* check if it is a dummy buffer */
+                else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W))
+                        break;
+
+                /* mark TD as empty */
+                clrbits16(&td->status, ~TD_W);
+                out_be16(&td->length, 0);
+                out_be32(&td->buf_ptr, 0);
+                out_be16(&td->extra, 0);
+                /* advance the TD pointer */
+                ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status);
+
+                /* check if it is a dummy buffer(type2) */
+                if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W))
+                        continue;
+
+                pkt = cq_get(ep->conf_frame_Q);
+                if (!pkt)
+                        fhci_err(usb->fhci, "no frame to confirm\n");
+
+                if (td_status & TD_ERRORS) {
+                        if (td_status & TD_RXER) {
+                                if (td_status & TD_CR)
+                                        pkt->status = USB_TD_RX_ER_CRC;
+                                else if (td_status & TD_AB)
+                                        pkt->status = USB_TD_RX_ER_BITSTUFF;
+                                else if (td_status & TD_OV)
+                                        pkt->status = USB_TD_RX_ER_OVERUN;
+                                else if (td_status & TD_BOV)
+                                        pkt->status = USB_TD_RX_DATA_OVERUN;
+                                else if (td_status & TD_NO)
+                                        pkt->status = USB_TD_RX_ER_NONOCT;
+                                else
+                                        fhci_err(usb->fhci, "illegal error "
+                                                 "occured\n");
+                        } else if (td_status & TD_NAK)
+                                pkt->status = USB_TD_TX_ER_NAK;
+                        else if (td_status & TD_TO)
+                                pkt->status = USB_TD_TX_ER_TIMEOUT;
+                        else if (td_status & TD_UN)
+                                pkt->status = USB_TD_TX_ER_UNDERUN;
+                        else if (td_status & TD_STAL)
+                                pkt->status = USB_TD_TX_ER_STALL;
+                        else
+                                fhci_err(usb->fhci, "illegal error occured\n");
+                } else if ((extra_data & TD_TOK_IN) &&
+                                pkt->len > td_length - CRC_SIZE) {
+                        pkt->status = USB_TD_RX_DATA_UNDERUN;
+                }
+
+                if (extra_data & TD_TOK_IN)
+                        pkt->len = td_length - CRC_SIZE;
+                else if (pkt->info & PKT_ZLP)
+                        pkt->len = 0;
+                else
+                        pkt->len = td_length;
+
+                fhci_transaction_confirm(usb, pkt);
+        }
+}
+
+/*
+ * Submitting a data frame to a specified endpoint of a USB device
+ * The frame is put in the driver's transmit queue for this endpoint
+ *
+ * Arguments:
+ * usb          A pointer to the USB structure
+ * pkt          A pointer to the user frame structure
+ * trans_type   Transaction tyep - IN,OUT or SETUP
+ * dest_addr    Device address - 0~127
+ * dest_ep      Endpoint number of the device - 0~16
+ * trans_mode   Pipe type - ISO,Interrupt,bulk or control
+ * dest_speed   USB speed - Low speed or FULL speed
+ * data_toggle  Data sequence toggle - 0 or 1
+ */
+u32 fhci_host_transaction(struct fhci_usb *usb,
+                          struct packet *pkt,
+                          enum fhci_ta_type trans_type,
+                          u8 dest_addr,
+                          u8 dest_ep,
+                          enum fhci_tf_mode trans_mode,
+                          enum fhci_speed dest_speed, u8 data_toggle)
+{
+        struct endpoint *ep = usb->ep0;
+        struct usb_td __iomem *td;
+        u16 extra_data;
+        u16 td_status;
+
+        fhci_usb_disable_interrupt(usb);
+        /* start from the next BD that should be filled */
+        td = ep->empty_td;
+        td_status = in_be16(&td->status);
+
+        if (td_status & TD_R && in_be16(&td->length)) {
+                /* if the TD is not free */
+                fhci_usb_enable_interrupt(usb);
+                return -1;
+        }
+
+        /* get the next TD in the ring */
+        ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+        fhci_usb_enable_interrupt(usb);
+        pkt->priv_data = td;
+        out_be32(&td->buf_ptr, virt_to_phys(pkt->data));
+        /* sets up transaction parameters - addr,endp,dir,and type */
+        extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr;
+        switch (trans_type) {
+        case FHCI_TA_IN:
+                extra_data |= TD_TOK_IN;
+                break;
+        case FHCI_TA_OUT:
+                extra_data |= TD_TOK_OUT;
+                break;
+        case FHCI_TA_SETUP:
+                extra_data |= TD_TOK_SETUP;
+                break;
+        }
+        if (trans_mode == FHCI_TF_ISO)
+                extra_data |= TD_ISO;
+        out_be16(&td->extra, extra_data);
+
+        /* sets up the buffer descriptor */
+        td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF);
+        if (!(pkt->info & PKT_NO_CRC))
+                td_status |= TD_TC;
+
+        switch (trans_type) {
+        case FHCI_TA_IN:
+                if (data_toggle)
+                        pkt->info |= PKT_PID_DATA1;
+                else
+                        pkt->info |= PKT_PID_DATA0;
+                break;
+        default:
+                if (data_toggle) {
+                        td_status |= TD_PID_DATA1;
+                        pkt->info |= PKT_PID_DATA1;
+                } else {
+                        td_status |= TD_PID_DATA0;
+                        pkt->info |= PKT_PID_DATA0;
+                }
+                break;
+        }
+
+        if ((dest_speed == FHCI_LOW_SPEED) &&
+            (usb->port_status == FHCI_PORT_FULL))
+                td_status |= TD_LSP;
+
+        out_be16(&td->status, td_status);
+
+        /* set up buffer length */
+        if (trans_type == FHCI_TA_IN)
+                out_be16(&td->length, pkt->len + CRC_SIZE);
+        else
+                out_be16(&td->length, pkt->len);
+
+        /* put the frame to the confirmation queue */
+        cq_put(ep->conf_frame_Q, pkt);
+
+        if (cq_howmany(ep->conf_frame_Q) == 1)
+                out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+        return 0;
+}
+
+/* Reset the Tx BD ring */
+void fhci_flush_bds(struct fhci_usb *usb)
+{
+        u16 extra_data;
+        u16 td_status;
+        u32 buf;
+        struct usb_td __iomem *td;
+        struct endpoint *ep = usb->ep0;
+
+        td = ep->td_base;
+        while (1) {
+                td_status = in_be16(&td->status);
+                buf = in_be32(&td->buf_ptr);
+                extra_data = in_be16(&td->extra);
+
+                /* if the TD is not empty - we'll confirm it as Timeout */
+                if (td_status & TD_R)
+                        out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+                /* if this TD is dummy - let's skip this TD */
+                else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER)
+                        out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER);
+                /* if this is the last TD - break */
+                if (td_status & TD_W)
+                        break;
+
+                td++;
+        }
+
+        fhci_td_transaction_confirm(usb);
+
+        td = ep->td_base;
+        do {
+                out_be16(&td->status, 0);
+                out_be16(&td->length, 0);
+                out_be32(&td->buf_ptr, 0);
+                out_be16(&td->extra, 0);
+                td++;
+        } while (!(in_be16(&td->status) & TD_W));
+        out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+        out_be16(&td->length, 0);
+        out_be32(&td->buf_ptr, 0);
+        out_be16(&td->extra, 0);
+
+        out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+                 in_be16(&ep->ep_pram_ptr->tx_base));
+        out_be32(&ep->ep_pram_ptr->tx_state, 0);
+        out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+        ep->empty_td = ep->td_base;
+        ep->conf_td = ep->td_base;
+}
+
+/*
+ * Flush all transmitted packets from TDs in the actual frame.
+ * This routine is called when something wrong with the controller and
+ * we want to get rid of the actual frame and start again next frame
+ */
+void fhci_flush_actual_frame(struct fhci_usb *usb)
+{
+        u8 mode;
+        u16 tb_ptr;
+        u16 extra_data;
+        u16 td_status;
+        u32 buf_ptr;
+        struct usb_td __iomem *td;
+        struct endpoint *ep = usb->ep0;
+
+        /* disable the USB controller */
+        mode = in_8(&usb->fhci->regs->usb_mod);
+        out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN);
+
+        tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+        td = cpm_muram_addr(tb_ptr);
+        td_status = in_be16(&td->status);
+        buf_ptr = in_be32(&td->buf_ptr);
+        extra_data = in_be16(&td->extra);
+        do {
+                if (td_status & TD_R) {
+                        out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+                } else {
+                        out_be32(&td->buf_ptr, 0);
+                        ep->already_pushed_dummy_bd = false;
+                        break;
+                }
+
+                /* advance the TD pointer */
+                td = next_bd(ep->td_base, td, td_status);
+                td_status = in_be16(&td->status);
+                buf_ptr = in_be32(&td->buf_ptr);
+                extra_data = in_be16(&td->extra);
+        } while ((td_status & TD_R) || buf_ptr);
+
+        fhci_td_transaction_confirm(usb);
+
+        out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+                 in_be16(&ep->ep_pram_ptr->tx_base));
+        out_be32(&ep->ep_pram_ptr->tx_state, 0);
+        out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+        ep->empty_td = ep->td_base;
+        ep->conf_td = ep->td_base;
+
+        usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+
+        /* reset the event register */
+        out_be16(&usb->fhci->regs->usb_event, 0xffff);
+        /* enable the USB controller */
+        out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/* handles Tx confirm and Tx error interrupt */
+void fhci_tx_conf_interrupt(struct fhci_usb *usb)
+{
+        fhci_td_transaction_confirm(usb);
+
+        /*
+         * Schedule another transaction to this frame only if we have
+         * already confirmed all transaction in the frame.
+         */
+        if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) ||
+             (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) &&
+            (list_empty(&usb->actual_frame->tds_list)))
+                fhci_schedule_transactions(usb);
+}
+
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb)
+{
+        u16 tb_ptr;
+        u16 td_status;
+        struct usb_td __iomem *td;
+        struct endpoint *ep = usb->ep0;
+
+        tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+        td = cpm_muram_addr(tb_ptr);
+
+        if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) {
+                struct usb_td __iomem *old_td = td;
+
+                ep->already_pushed_dummy_bd = false;
+                td_status = in_be16(&td->status);
+                /* gets the next TD in the ring */
+                td = next_bd(ep->td_base, td, td_status);
+                tb_ptr = cpm_muram_offset(td);
+                out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr);
+
+                /* start transmit only if we have something in the TDs */
+                if (in_be16(&td->status) & TD_R)
+                        out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+                if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) {
+                        out_be32(&old_td->buf_ptr, 0);
+                        ep->conf_td = next_bd(ep->td_base, ep->conf_td,
+                                              td_status);
+                } else {
+                        out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER);
+                }
+        }
+}
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
new file mode 100644
index 000000000000..7116284ed21a
--- /dev/null
+++ b/drivers/usb/host/fhci.h
@@ -0,0 +1,607 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FHCI_H
+#define __FHCI_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+
+#define USB_CLOCK       48000000
+
+#define FHCI_PRAM_SIZE 0x100
+
+#define MAX_EDS         32
+#define MAX_TDS         32
+
+
+/* CRC16 field size */
+#define CRC_SIZE 2
+
+/* USB protocol overhead for each frame transmitted from the host */
+#define PROTOCOL_OVERHEAD 7
+
+/* Packet structure, info field */
+#define PKT_PID_DATA0           0x80000000 /* PID - Data toggle zero */
+#define PKT_PID_DATA1           0x40000000 /* PID - Data toggle one  */
+#define PKT_PID_SETUP           0x20000000 /* PID - Setup bit */
+#define PKT_SETUP_STATUS        0x10000000 /* Setup status bit */
+#define PKT_SETADDR_STATUS      0x08000000 /* Set address status bit */
+#define PKT_SET_HOST_LAST       0x04000000 /* Last data packet */
+#define PKT_HOST_DATA           0x02000000 /* Data packet */
+#define PKT_FIRST_IN_FRAME      0x01000000 /* First packet in the frame */
+#define PKT_TOKEN_FRAME         0x00800000 /* Token packet */
+#define PKT_ZLP                 0x00400000 /* Zero length packet */
+#define PKT_IN_TOKEN_FRAME      0x00200000 /* IN token packet */
+#define PKT_OUT_TOKEN_FRAME     0x00100000 /* OUT token packet */
+#define PKT_SETUP_TOKEN_FRAME   0x00080000 /* SETUP token packet */
+#define PKT_STALL_FRAME         0x00040000 /* STALL packet */
+#define PKT_NACK_FRAME          0x00020000 /* NACK packet */
+#define PKT_NO_PID              0x00010000 /* No PID */
+#define PKT_NO_CRC              0x00008000 /* don't append CRC */
+#define PKT_HOST_COMMAND        0x00004000 /* Host command packet */
+#define PKT_DUMMY_PACKET        0x00002000 /* Dummy packet, used for mmm */
+#define PKT_LOW_SPEED_PACKET    0x00001000 /* Low-Speed packet */
+
+#define TRANS_OK                (0)
+#define TRANS_INPROGRESS        (-1)
+#define TRANS_DISCARD           (-2)
+#define TRANS_FAIL              (-3)
+
+#define PS_INT          0
+#define PS_DISCONNECTED 1
+#define PS_CONNECTED    2
+#define PS_READY        3
+#define PS_MISSING      4
+
+/* Transfer Descriptor status field */
+#define USB_TD_OK               0x00000000 /* TD transmited or received ok */
+#define USB_TD_INPROGRESS       0x80000000 /* TD is being transmitted */
+#define USB_TD_RX_ER_NONOCT     0x40000000 /* Tx Non Octet Aligned Packet */
+#define USB_TD_RX_ER_BITSTUFF   0x20000000 /* Frame Aborted-Received pkt */
+#define USB_TD_RX_ER_CRC        0x10000000 /* CRC error */
+#define USB_TD_RX_ER_OVERUN     0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_PID        0x04000000 /* wrong PID received */
+#define USB_TD_RX_DATA_UNDERUN  0x02000000 /* shorter than expected */
+#define USB_TD_RX_DATA_OVERUN   0x01000000 /* longer than expected */
+#define USB_TD_TX_ER_NAK        0x00800000 /* NAK handshake */
+#define USB_TD_TX_ER_STALL      0x00400000 /* STALL handshake */
+#define USB_TD_TX_ER_TIMEOUT    0x00200000 /* transmit time out */
+#define USB_TD_TX_ER_UNDERUN    0x00100000 /* transmit underrun */
+
+#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \
+                USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \
+                USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \
+                USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \
+                USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN)
+
+/* Transfer Descriptor toggle field */
+#define USB_TD_TOGGLE_DATA0     0
+#define USB_TD_TOGGLE_DATA1     1
+#define USB_TD_TOGGLE_CARRY     2
+
+/* #define MULTI_DATA_BUS */
+
+/* Bus mode register RBMR/TBMR */
+#define BUS_MODE_GBL    0x20    /* Global snooping */
+#define BUS_MODE_BO     0x18    /* Byte ordering */
+#define BUS_MODE_BO_BE  0x10    /* Byte ordering - Big-endian */
+#define BUS_MODE_DTB    0x02    /* Data bus */
+
+/* FHCI QE USB Register Description */
+
+/* USB Mode Register bit define */
+#define USB_MODE_EN             0x01
+#define USB_MODE_HOST           0x02
+#define USB_MODE_TEST           0x04
+#define USB_MODE_SFTE           0x08
+#define USB_MODE_RESUME         0x40
+#define USB_MODE_LSS            0x80
+
+/* USB Slave Address Register Mask */
+#define USB_SLVADDR_MASK        0x7F
+
+/* USB Endpoint register define */
+#define USB_EPNUM_MASK          0xF000
+#define USB_EPNUM_SHIFT         12
+
+#define USB_TRANS_MODE_SHIFT    8
+#define USB_TRANS_CTR           0x0000
+#define USB_TRANS_INT           0x0100
+#define USB_TRANS_BULK          0x0200
+#define USB_TRANS_ISO           0x0300
+
+#define USB_EP_MF               0x0020
+#define USB_EP_RTE              0x0010
+
+#define USB_THS_SHIFT           2
+#define USB_THS_MASK            0x000c
+#define USB_THS_NORMAL          0x0
+#define USB_THS_IGNORE_IN       0x0004
+#define USB_THS_NACK            0x0008
+#define USB_THS_STALL           0x000c
+
+#define USB_RHS_SHIFT           0
+#define USB_RHS_MASK            0x0003
+#define USB_RHS_NORMAL          0x0
+#define USB_RHS_IGNORE_OUT      0x0001
+#define USB_RHS_NACK            0x0002
+#define USB_RHS_STALL           0x0003
+
+#define USB_RTHS_MASK           0x000f
+
+/* USB Command Register define */
+#define USB_CMD_STR_FIFO        0x80
+#define USB_CMD_FLUSH_FIFO      0x40
+#define USB_CMD_ISFT            0x20
+#define USB_CMD_DSFT            0x10
+#define USB_CMD_EP_MASK         0x03
+
+/* USB Event and Mask Register define */
+#define USB_E_MSF_MASK          0x0800
+#define USB_E_SFT_MASK          0x0400
+#define USB_E_RESET_MASK        0x0200
+#define USB_E_IDLE_MASK         0x0100
+#define USB_E_TXE4_MASK         0x0080
+#define USB_E_TXE3_MASK         0x0040
+#define USB_E_TXE2_MASK         0x0020
+#define USB_E_TXE1_MASK         0x0010
+#define USB_E_SOF_MASK          0x0008
+#define USB_E_BSY_MASK          0x0004
+#define USB_E_TXB_MASK          0x0002
+#define USB_E_RXB_MASK          0x0001
+
+/* Freescale USB Host controller registers */
+struct fhci_regs {
+        u8 usb_mod;             /* mode register */
+        u8 usb_addr;            /* address register */
+        u8 usb_comm;            /* command register */
+        u8 reserved1[1];
+        __be16 usb_ep[4];       /* endpoint register */
+        u8 reserved2[4];
+        __be16 usb_event;       /* event register */
+        u8 reserved3[2];
+        __be16 usb_mask;        /* mask register */
+        u8 reserved4[1];
+        u8 usb_status;          /* status register */
+        __be16 usb_sof_tmr;     /* Start Of Frame timer */
+        u8 reserved5[2];
+        __be16 usb_frame_num;   /* frame number register */
+        u8 reserved6[1];
+};
+
+/* Freescale USB HOST */
+struct fhci_pram {
+        __be16 ep_ptr[4];       /* Endpoint porter reg */
+        __be32 rx_state;        /* Rx internal state */
+        __be32 rx_ptr;          /* Rx internal data pointer */
+        __be16 frame_num;       /* Frame number */
+        __be16 rx_cnt;          /* Rx byte count */
+        __be32 rx_temp;         /* Rx temp */
+        __be32 rx_data_temp;    /* Rx data temp */
+        __be16 rx_u_ptr;        /* Rx microcode return address temp */
+        u8 reserved1[2];        /* reserved area */
+        __be32 sof_tbl;         /* SOF lookup table pointer */
+        u8 sof_u_crc_temp;      /* SOF micorcode CRC5 temp reg */
+        u8 reserved2[0xdb];
+};
+
+/* Freescale USB Endpoint*/
+struct fhci_ep_pram {
+        __be16 rx_base;         /* Rx BD base address */
+        __be16 tx_base;         /* Tx BD base address */
+        u8 rx_func_code;        /* Rx function code */
+        u8 tx_func_code;        /* Tx function code */
+        __be16 rx_buff_len;     /* Rx buffer length */
+        __be16 rx_bd_ptr;       /* Rx BD pointer */
+        __be16 tx_bd_ptr;       /* Tx BD pointer */
+        __be32 tx_state;        /* Tx internal state */
+        __be32 tx_ptr;          /* Tx internal data pointer */
+        __be16 tx_crc;          /* temp transmit CRC */
+        __be16 tx_cnt;          /* Tx byte count */
+        __be32 tx_temp;         /* Tx temp */
+        __be16 tx_u_ptr;        /* Tx microcode return address temp */
+        __be16 reserved;
+};
+
+struct fhci_controller_list {
+        struct list_head ctrl_list;     /* control endpoints */
+        struct list_head bulk_list;     /* bulk endpoints */
+        struct list_head iso_list;      /* isochronous endpoints */
+        struct list_head intr_list;     /* interruput endpoints */
+        struct list_head done_list;     /* done transfers */
+};
+
+struct virtual_root_hub {
+        int dev_num;    /* USB address of the root hub */
+        u32 feature;    /* indicates what feature has been set */
+        struct usb_hub_status hub;
+        struct usb_port_status port;
+};
+
+enum fhci_gpios {
+        GPIO_USBOE = 0,
+        GPIO_USBTP,
+        GPIO_USBTN,
+        GPIO_USBRP,
+        GPIO_USBRN,
+        /* these are optional */
+        GPIO_SPEED,
+        GPIO_POWER,
+        NUM_GPIOS,
+};
+
+enum fhci_pins {
+        PIN_USBOE = 0,
+        PIN_USBTP,
+        PIN_USBTN,
+        NUM_PINS,
+};
+
+struct fhci_hcd {
+        enum qe_clock fullspeed_clk;
+        enum qe_clock lowspeed_clk;
+        struct qe_pin *pins[NUM_PINS];
+        int gpios[NUM_GPIOS];
+        bool alow_gpios[NUM_GPIOS];
+
+        struct fhci_regs __iomem *regs; /* I/O memory used to communicate */
+        struct fhci_pram __iomem *pram; /* Parameter RAM */
+        struct gtm_timer *timer;
+
+        spinlock_t lock;
+        struct fhci_usb *usb_lld; /* Low-level driver */
+        struct virtual_root_hub *vroot_hub; /* the virtual root hub */
+        int active_urbs;
+        struct fhci_controller_list *hc_list;
+        struct tasklet_struct *process_done_task; /* tasklet for done list */
+
+        struct list_head empty_eds;
+        struct list_head empty_tds;
+
+#ifdef CONFIG_FHCI_DEBUG
+        int usb_irq_stat[13];
+        struct dentry *dfs_root;
+        struct dentry *dfs_regs;
+        struct dentry *dfs_irq_stat;
+#endif
+};
+
+#define USB_FRAME_USAGE 90
+#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10)   /* frame time usage */
+#define SW_FIX_TIME_BETWEEN_TRANSACTION 150     /* SW */
+#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15)
+#define MAX_PERIODIC_FRAME_USAGE 90
+
+/* transaction type */
+enum fhci_ta_type {
+        FHCI_TA_IN = 0, /* input transaction */
+        FHCI_TA_OUT,    /* output transaction */
+        FHCI_TA_SETUP,  /* setup transaction */
+};
+
+/* transfer mode */
+enum fhci_tf_mode {
+        FHCI_TF_CTRL = 0,
+        FHCI_TF_ISO,
+        FHCI_TF_BULK,
+        FHCI_TF_INTR,
+};
+
+enum fhci_speed {
+        FHCI_FULL_SPEED,
+        FHCI_LOW_SPEED,
+};
+
+/* endpoint state */
+enum fhci_ed_state {
+        FHCI_ED_NEW = 0, /* pipe is new */
+        FHCI_ED_OPER,    /* pipe is operating */
+        FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */
+        FHCI_ED_SKIP,    /* skip this pipe */
+        FHCI_ED_HALTED,  /* pipe is halted */
+};
+
+enum fhci_port_status {
+        FHCI_PORT_POWER_OFF = 0,
+        FHCI_PORT_DISABLED,
+        FHCI_PORT_DISCONNECTING,
+        FHCI_PORT_WAITING,      /* waiting for connection */
+        FHCI_PORT_FULL,         /* full speed connected */
+        FHCI_PORT_LOW,          /* low speed connected */
+};
+
+enum fhci_mem_alloc {
+        MEM_CACHABLE_SYS = 0x00000001,  /* primary DDR,cachable */
+        MEM_NOCACHE_SYS = 0x00000004,   /* primary DDR,non-cachable */
+        MEM_SECONDARY = 0x00000002,     /* either secondary DDR or SDRAM */
+        MEM_PRAM = 0x00000008,          /* multi-user RAM identifier */
+};
+
+/* USB default parameters*/
+#define DEFAULT_RING_LEN        8
+#define DEFAULT_DATA_MEM        MEM_CACHABLE_SYS
+
+struct ed {
+        u8 dev_addr;            /* device address */
+        u8 ep_addr;             /* endpoint address */
+        enum fhci_tf_mode mode; /* USB transfer mode */
+        enum fhci_speed speed;
+        unsigned int max_pkt_size;
+        enum fhci_ed_state state;
+        struct list_head td_list; /* a list of all queued TD to this pipe */
+        struct list_head node;
+
+        /* read only parameters, should be cleared upon initialization */
+        u8 toggle_carry;        /* toggle carry from the last TD submitted */
+        u32 last_iso;           /* time stamp of last queued ISO transfer */
+        struct td *td_head;     /* a pointer to the current TD handled */
+};
+
+struct td {
+        void *data;              /* a pointer to the data buffer */
+        unsigned int len;        /* length of the data to be submitted */
+        unsigned int actual_len; /* actual bytes transfered on this td */
+        enum fhci_ta_type type;  /* transaction type */
+        u8 toggle;               /* toggle for next trans. within this TD */
+        u16 iso_index;           /* ISO transaction index */
+        u16 start_frame;         /* start frame time stamp */
+        u16 interval;            /* interval between trans. (for ISO/Intr) */
+        u32 status;              /* status of the TD */
+        struct ed *ed;           /* a handle to the corresponding ED */
+        struct urb *urb;         /* a handle to the corresponding URB */
+        bool ioc;                /* Inform On Completion */
+        struct list_head node;
+
+        /* read only parameters should be cleared upon initialization */
+        struct packet *pkt;
+        int nak_cnt;
+        int error_cnt;
+        struct list_head frame_lh;
+};
+
+struct packet {
+        u8 *data;       /* packet data */
+        u32 len;        /* packet length */
+        u32 status;     /* status of the packet - equivalent to the status
+                         * field for the corresponding structure td */
+        u32 info;       /* packet information */
+        void __iomem *priv_data; /* private data of the driver (TDs or BDs) */
+};
+
+/* struct for each URB */
+#define URB_INPROGRESS  0
+#define URB_DEL         1
+
+/* URB states (state field) */
+#define US_BULK         0
+#define US_BULK0        1
+
+/* three setup states */
+#define US_CTRL_SETUP   2
+#define US_CTRL_DATA    1
+#define US_CTRL_ACK     0
+
+#define EP_ZERO 0
+
+struct urb_priv {
+        int num_of_tds;
+        int tds_cnt;
+        int state;
+
+        struct td **tds;
+        struct ed *ed;
+        struct timer_list time_out;
+};
+
+struct endpoint {
+        /* Pointer to ep parameter RAM */
+        struct fhci_ep_pram __iomem *ep_pram_ptr;
+
+        /* Host transactions */
+        struct usb_td __iomem *td_base; /* first TD in the ring */
+        struct usb_td __iomem *conf_td; /* next TD for confirm after transac */
+        struct usb_td __iomem *empty_td;/* next TD for new transaction req. */
+        struct kfifo *empty_frame_Q;  /* Empty frames list to use */
+        struct kfifo *conf_frame_Q;   /* frames passed to TDs,waiting for tx */
+        struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */
+
+        bool already_pushed_dummy_bd;
+};
+
+/* struct for each 1mSec frame time */
+#define FRAME_IS_TRANSMITTED            0x00
+#define FRAME_TIMER_END_TRANSMISSION    0x01
+#define FRAME_DATA_END_TRANSMISSION     0x02
+#define FRAME_END_TRANSMISSION          0x03
+#define FRAME_IS_PREPARED               0x04
+
+struct fhci_time_frame {
+        u16 frame_num;   /* frame number */
+        u16 total_bytes; /* total bytes submitted within this frame */
+        u8 frame_status; /* flag that indicates to stop fill this frame */
+        struct list_head tds_list; /* all tds of this frame */
+};
+
+/* internal driver structure*/
+struct fhci_usb {
+        u16 saved_msk;           /* saving of the USB mask register */
+        struct endpoint *ep0;    /* pointer for endpoint0 structure */
+        int intr_nesting_cnt;    /* interrupt nesting counter */
+        u16 max_frame_usage;     /* max frame time usage,in micro-sec */
+        u16 max_bytes_per_frame; /* max byte can be tx in one time frame */
+        u32 sw_transaction_time; /* sw complete trans time,in micro-sec */
+        struct fhci_time_frame *actual_frame;
+        struct fhci_controller_list *hc_list;   /* main structure for hc */
+        struct virtual_root_hub *vroot_hub;
+        enum fhci_port_status port_status;      /* v_rh port status */
+
+        u32 (*transfer_confirm)(struct fhci_hcd *fhci);
+
+        struct fhci_hcd *fhci;
+};
+
+/*
+ * Various helpers and prototypes below.
+ */
+
+static inline u16 get_frame_num(struct fhci_hcd *fhci)
+{
+        return in_be16(&fhci->pram->frame_num) & 0x07ff;
+}
+
+#define fhci_dbg(fhci, fmt, args...) \
+                dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_vdbg(fhci, fmt, args...) \
+                dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_err(fhci, fmt, args...) \
+                dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_info(fhci, fmt, args...) \
+                dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_warn(fhci, fmt, args...) \
+                dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+
+static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd)
+{
+        return (struct fhci_hcd *)hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci)
+{
+        return container_of((void *)fhci, struct usb_hcd, hcd_priv);
+}
+
+/* fifo of pointers */
+static inline struct kfifo *cq_new(int size)
+{
+        return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL);
+}
+
+static inline void cq_delete(struct kfifo *kfifo)
+{
+        kfifo_free(kfifo);
+}
+
+static inline unsigned int cq_howmany(struct kfifo *kfifo)
+{
+        return __kfifo_len(kfifo) / sizeof(void *);
+}
+
+static inline int cq_put(struct kfifo *kfifo, void *p)
+{
+        return __kfifo_put(kfifo, (void *)&p, sizeof(p));
+}
+
+static inline void *cq_get(struct kfifo *kfifo)
+{
+        void *p = NULL;
+
+        __kfifo_get(kfifo, (void *)&p, sizeof(p));
+        return p;
+}
+
+/* fhci-hcd.c */
+void fhci_start_sof_timer(struct fhci_hcd *fhci);
+void fhci_stop_sof_timer(struct fhci_hcd *fhci);
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb);
+void fhci_usb_enable_interrupt(struct fhci_usb *usb);
+void fhci_usb_disable_interrupt(struct fhci_usb *usb);
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci);
+
+/* fhci-mem.c */
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td);
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed);
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci);
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+                        struct urb_priv *urb_priv, struct ed *ed, u16 index,
+                        enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+                        u16 interval, u16 start_frame, bool ioc);
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number);
+
+/* fhci-hub.c */
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+                        enum fhci_port_status status);
+void fhci_port_disable(struct fhci_hcd *fhci);
+void fhci_port_enable(void *lld);
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci);
+void fhci_port_reset(void *lld);
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+                     u16 wIndex, char *buf, u16 wLength);
+
+/* fhci-tds.c */
+void fhci_flush_bds(struct fhci_usb *usb);
+void fhci_flush_actual_frame(struct fhci_usb *usb);
+u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt,
+                          enum fhci_ta_type trans_type, u8 dest_addr,
+                          u8 dest_ep, enum fhci_tf_mode trans_mode,
+                          enum fhci_speed dest_speed, u8 data_toggle);
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb);
+void fhci_tx_conf_interrupt(struct fhci_usb *usb);
+void fhci_push_dummy_bd(struct endpoint *ep);
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+                   u32 ring_len);
+void fhci_init_ep_registers(struct fhci_usb *usb,
+                            struct endpoint *ep,
+                            enum fhci_mem_alloc data_mem);
+void fhci_ep0_free(struct fhci_usb *usb);
+
+/* fhci-sched.c */
+extern struct tasklet_struct fhci_tasklet;
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt);
+void fhci_flush_all_transmissions(struct fhci_usb *usb);
+void fhci_schedule_transactions(struct fhci_usb *usb);
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci);
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci);
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb);
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci);
+irqreturn_t fhci_irq(struct usb_hcd *hcd);
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd);
+
+/* fhci-q.h */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb);
+struct td *fhci_remove_td_from_ed(struct ed *ed);
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame);
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed);
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame);
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td);
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list);
+void fhci_done_td(struct urb *urb, struct td *td);
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed);
+
+#ifdef CONFIG_FHCI_DEBUG
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er);
+void fhci_dfs_destroy(struct fhci_hcd *fhci);
+void fhci_dfs_create(struct fhci_hcd *fhci);
+
+#else
+
+static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {}
+static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {}
+static inline void fhci_dfs_create(struct fhci_hcd *fhci) {}
+
+#endif /* CONFIG_FHCI_DEBUG */
+
+#endif /* __FHCI_H */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 65a9609f4ad6..5cf5f1eca4f4 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -593,12 +593,10 @@ static int ohci_run (struct ohci_hcd *ohci)
          * to be checked in case boot firmware (BIOS/SMM/...) has set up
          * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
          * If the bus glue detected wakeup capability then it should
-         * already be enabled.  Either way, if wakeup should be enabled
-         * but isn't, we'll enable it now.
+         * already be enabled; if so we'll just enable it again.
          */
-        if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
-                        && !device_can_wakeup(hcd->self.controller))
-                device_init_wakeup(hcd->self.controller, 1);
+        if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
+                device_set_wakeup_capable(hcd->self.controller, 1);
 
         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
         case OHCI_USB_OPER:
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 8b28ae7865ba..5d625c3fd423 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = {
 
 #ifdef  CONFIG_PM
         .suspend =      usb_hcd_pci_suspend,
-        .suspend_late = usb_hcd_pci_suspend_late,
         .resume_early = usb_hcd_pci_resume_early,
         .resume =       usb_hcd_pci_resume,
 #endif
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4e221060f58c..944f7e0ca4df 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = {
 
 #ifdef  CONFIG_PM
         .suspend =      usb_hcd_pci_suspend,
-        .suspend_late = usb_hcd_pci_suspend_late,
         .resume_early = usb_hcd_pci_resume_early,
         .resume =       usb_hcd_pci_resume,
 #endif  /* PM */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 189a9db03509..ad4fb15b5dcb 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -57,7 +57,6 @@
 #define USB_DEVICE_ID_LD_MACHINETEST    0x2040  /* USB Product ID of Machine Test System */
 
 #define USB_VENDOR_ID_VERNIER           0x08f7
-#define USB_DEVICE_ID_VERNIER_LABPRO    0x0001
 #define USB_DEVICE_ID_VERNIER_GOTEMP    0x0002
 #define USB_DEVICE_ID_VERNIER_SKIP      0x0003
 #define USB_DEVICE_ID_VERNIER_CYCLOPS   0x0004
@@ -85,7 +84,6 @@ static struct usb_device_id ld_usb_table [] = {
         { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
         { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
         { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
-        { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
         { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
         { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
         { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) },
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index e06810aef2df..4cf27c72423e 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -37,6 +37,7 @@
 #define MON_IOCX_GET   _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
 #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
 #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+
 #ifdef CONFIG_COMPAT
 #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
 #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
@@ -921,21 +922,6 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
                 }
                 break;
 
-#ifdef CONFIG_COMPAT
-        case MON_IOCX_GET32: {
-                struct mon_bin_get32 getb;
-
-                if (copy_from_user(&getb, (void __user *)arg,
-                                            sizeof(struct mon_bin_get32)))
-                        return -EFAULT;
-
-                ret = mon_bin_get_event(file, rp,
-                    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
-                    getb.alloc32);
-                }
-                break;
-#endif
-
         case MON_IOCX_MFETCH:
                 {
                 struct mon_bin_mfetch mfetch;
@@ -962,7 +948,57 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
                 }
                 break;
 
+        case MON_IOCG_STATS: {
+                struct mon_bin_stats __user *sp;
+                unsigned int nevents;
+                unsigned int ndropped;
+
+                spin_lock_irqsave(&rp->b_lock, flags);
+                ndropped = rp->cnt_lost;
+                rp->cnt_lost = 0;
+                spin_unlock_irqrestore(&rp->b_lock, flags);
+                nevents = mon_bin_queued(rp);
+
+                sp = (struct mon_bin_stats __user *)arg;
+                if (put_user(rp->cnt_lost, &sp->dropped))
+                        return -EFAULT;
+                if (put_user(nevents, &sp->queued))
+                        return -EFAULT;
+
+                }
+                break;
+
+        default:
+                return -ENOTTY;
+        }
+
+        return ret;
+}
+
 #ifdef CONFIG_COMPAT
+static long mon_bin_compat_ioctl(struct file *file,
+    unsigned int cmd, unsigned long arg)
+{
+        struct mon_reader_bin *rp = file->private_data;
+        int ret;
+
+        switch (cmd) {
+
+        case MON_IOCX_GET32: {
+                struct mon_bin_get32 getb;
+
+                if (copy_from_user(&getb, (void __user *)arg,
+                                            sizeof(struct mon_bin_get32)))
+                        return -EFAULT;
+
+                ret = mon_bin_get_event(file, rp,
+                    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
+                    getb.alloc32);
+                if (ret < 0)
+                        return ret;
+                }
+                return 0;
+
         case MON_IOCX_MFETCH32:
                 {
                 struct mon_bin_mfetch32 mfetch;
@@ -986,37 +1022,25 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file,
                         return ret;
                 if (put_user(ret, &uptr->nfetch32))
                         return -EFAULT;
-                ret = 0;
                 }
-                break;
-#endif
-
-        case MON_IOCG_STATS: {
-                struct mon_bin_stats __user *sp;
-                unsigned int nevents;
-                unsigned int ndropped;
-
-                spin_lock_irqsave(&rp->b_lock, flags);
-                ndropped = rp->cnt_lost;
-                rp->cnt_lost = 0;
-                spin_unlock_irqrestore(&rp->b_lock, flags);
-                nevents = mon_bin_queued(rp);
+                return 0;
 
-                sp = (struct mon_bin_stats __user *)arg;
-                if (put_user(rp->cnt_lost, &sp->dropped))
-                        return -EFAULT;
-                if (put_user(nevents, &sp->queued))
-                        return -EFAULT;
+        case MON_IOCG_STATS:
+                return mon_bin_ioctl(NULL, file, cmd,
+                                            (unsigned long) compat_ptr(arg));
 
-                }
-                break;
+        case MON_IOCQ_URB_LEN:
+        case MON_IOCQ_RING_SIZE:
+        case MON_IOCT_RING_SIZE:
+        case MON_IOCH_MFLUSH:
+                return mon_bin_ioctl(NULL, file, cmd, arg);
 
         default:
-                return -ENOTTY;
+                ;
         }
-
-        return ret;
+        return -ENOTTY;
 }
+#endif /* CONFIG_COMPAT */
 
 static unsigned int
 mon_bin_poll(struct file *file, struct poll_table_struct *wait)
@@ -1094,6 +1118,9 @@ static const struct file_operations mon_fops_binary = {
         /* .write =     mon_text_write, */
         .poll =         mon_bin_poll,
         .ioctl =        mon_bin_ioctl,
+#ifdef CONFIG_COMPAT
+        .compat_ioctl = mon_bin_compat_ioctl,
+#endif
         .release =      mon_bin_release,
         .mmap =         mon_bin_mmap,
 };
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5af7379cd9a3..9985db08e7db 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,6 +11,7 @@ config USB_MUSB_HDRC
         depends on (USB || USB_GADGET) && HAVE_CLK
         depends on !SUPERH
         select TWL4030_USB if MACH_OMAP_3430SDP
+        select USB_OTG_UTILS
         tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
         help
           Say Y here if your system has a dual role high speed USB
@@ -49,7 +50,7 @@ comment "OMAP 343x high speed USB support"
         depends on USB_MUSB_HDRC && ARCH_OMAP34XX
 
 comment "Blackfin high speed USB Support"
-        depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523)
+        depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 
 config USB_TUSB6010
         boolean "TUSB 6010 support"
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 5ad6d0893cbe..569ef0fed0f6 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -9,6 +9,7 @@
 #include <linux/usb.h>
 
 #include "musb_core.h"
+#include "musb_debug.h"
 #include "cppi_dma.h"
 
 
@@ -423,6 +424,7 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx,
         }
 }
 
+#ifdef CONFIG_USB_MUSB_DEBUG
 static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
 {
         pr_debug("RXBD/%s %08x: "
@@ -431,10 +433,11 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
                         bd->hw_next, bd->hw_bufp, bd->hw_off_len,
                         bd->hw_options);
 }
+#endif
 
 static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
 {
-#if MUSB_DEBUG > 0
+#ifdef CONFIG_USB_MUSB_DEBUG
         struct cppi_descriptor  *bd;
 
         if (!_dbg_level(level))
@@ -881,12 +884,14 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
         bd->hw_options |= CPPI_SOP_SET;
         tail->hw_options |= CPPI_EOP_SET;
 
-        if (debug >= 5) {
+#ifdef CONFIG_USB_MUSB_DEBUG
+        if (_dbg_level(5)) {
                 struct cppi_descriptor  *d;
 
                 for (d = rx->head; d; d = d->next)
                         cppi_dump_rxbd("S", d);
         }
+#endif
 
         /* in case the preceding transfer left some state... */
         tail = rx->last_processed;
@@ -990,6 +995,7 @@ static int cppi_channel_program(struct dma_channel *ch,
         cppi_ch->offset = 0;
         cppi_ch->maxpacket = maxpacket;
         cppi_ch->buf_len = len;
+        cppi_ch->channel.actual_len = 0;
 
         /* TX channel? or RX? */
         if (cppi_ch->transmit)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 0d566dc5ce06..5a8fd5d57a11 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -32,9 +32,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/arch/hardware.h>
-#include <mach/arch/memory.h>
-#include <mach/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
+#include <mach/gpio.h>
+
 #include <asm/mach-types.h>
 
 #include "musb_core.h"
@@ -370,12 +371,6 @@ int musb_platform_set_mode(struct musb *musb, u8 mode)
         return -EIO;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 mode)
-{
-       /* EVM can't do this (right?) */
-       return -EIO;
-}
-
 int __init musb_platform_init(struct musb *musb)
 {
         void __iomem    *tibase = musb->ctrl_base;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 6c7faacfb535..2cc34fa05b73 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1824,8 +1824,9 @@ static void musb_free(struct musb *musb)
         musb_gadget_cleanup(musb);
 #endif
 
-        if (musb->nIrq >= 0 && musb->irq_wake) {
-                disable_irq_wake(musb->nIrq);
+        if (musb->nIrq >= 0) {
+                if (musb->irq_wake)
+                        disable_irq_wake(musb->nIrq);
                 free_irq(musb->nIrq, musb);
         }
         if (is_dma_capable() && musb->dma_controller) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6197daeab8f9..4ea305387981 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep,
                 status = -EBUSY;
                 goto fail;
         }
-        musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+        musb_ep->type = usb_endpoint_type(desc);
 
         /* check direction and (later) maxpacket size against endpoint */
-        if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+        if (usb_endpoint_num(desc) != epnum)
                 goto fail;
 
         /* REVISIT this rules out high bandwidth periodic transfers */
@@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
          * packet size (or fail), set the mode, clear the fifo
          */
         musb_ep_select(mbase, epnum);
-        if (desc->bEndpointAddress & USB_DIR_IN) {
+        if (usb_endpoint_dir_in(desc)) {
                 u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
 
                 if (hw_ep->is_shared_fifo)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 99fa61234876..a035ceccf950 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1847,8 +1847,8 @@ static int musb_urb_enqueue(
                 goto done;
         }
 
-        qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-        qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+        qh->epnum = usb_endpoint_num(epd);
+        qh->type = usb_endpoint_type(epd);
 
         /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
         qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 52f7f29cebda..7e073a0d7ac9 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -15,8 +15,8 @@
 #include <linux/usb.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
 
 #include "musb_core.h"
 
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 8e8dbdb9b39b..ee55b449ffde 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -6,14 +6,14 @@
 
 comment "OTG and related infrastructure"
 
-if USB || USB_GADGET
-
 config USB_OTG_UTILS
         bool
         help
           Select this to make sure the build includes objects from
           the OTG infrastructure directory.
 
+if USB || USB_GADGET
+
 #
 # USB Transceiver Drivers
 #
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index cfaf1f085535..027f4b7dde86 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -85,6 +85,8 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
         { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
         { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+        { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+        { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
         { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
         { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
         { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c70a8f667d85..75597337583e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -660,6 +660,8 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+        { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+        { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 373ee09975bb..1b62eff475d2 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -854,6 +854,10 @@
 #define FTDI_DOMINTELL_DGQG_PID 0xEF50  /* Master */
 #define FTDI_DOMINTELL_DUSB_PID 0xEF51  /* DUSB01 module */
 
+/* Alti-2 products  http://www.alti-2.com */
+#define ALTI2_VID       0x1BC9
+#define ALTI2_N3_PID    0x6001  /* Neptune 3 */
+
 /* Commands */
 #define FTDI_SIO_RESET          0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL     1 /* Set the modem control register */
@@ -881,6 +885,11 @@
 #define RATOC_PRODUCT_ID_USB60F 0xb020
 
 /*
+ * DIEBOLD BCS SE923
+ */
+#define DIEBOLD_BCS_SE923_PID   0xfb99
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5ed183477aaf..6c89da9c6fea 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -158,6 +158,13 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define HUAWEI_PRODUCT_E143E                    0x143E
 #define HUAWEI_PRODUCT_E143F                    0x143F
 
+#define QUANTA_VENDOR_ID                        0x0408
+#define QUANTA_PRODUCT_Q101                     0xEA02
+#define QUANTA_PRODUCT_Q111                     0xEA03
+#define QUANTA_PRODUCT_GLX                      0xEA04
+#define QUANTA_PRODUCT_GKE                      0xEA05
+#define QUANTA_PRODUCT_GLE                      0xEA06
+
 #define NOVATELWIRELESS_VENDOR_ID               0x1410
 
 /* YISO PRODUCTS */
@@ -224,7 +231,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define ONDA_VENDOR_ID                          0x19d2
 #define ONDA_PRODUCT_MSA501HS                   0x0001
 #define ONDA_PRODUCT_ET502HS                    0x0002
-#define ONDA_PRODUCT_MT503HS                    0x0200
+#define ONDA_PRODUCT_MT503HS                    0x2000
 
 #define BANDRICH_VENDOR_ID                      0x1A8D
 #define BANDRICH_PRODUCT_C100_1                 0x1002
@@ -298,6 +305,11 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+        { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
+        { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
+        { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
+        { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
+        { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3cf41df302d7..baf591137b80 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -184,6 +184,7 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = {
         { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
         { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
         { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+        { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -191,6 +192,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+        { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -205,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] =
         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+        { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
         { }
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 7e4752fbf232..b7ea5dbadee5 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -27,7 +27,9 @@
 
 /* Vendor and product ids */
 #define TI_VENDOR_ID                    0x0451
+#define IBM_VENDOR_ID                   0x04b3
 #define TI_3410_PRODUCT_ID              0x3410
+#define IBM_4543_PRODUCT_ID             0x4543
 #define TI_3410_EZ430_ID                0xF430  /* TI ez430 development tool */
 #define TI_5052_BOOT_PRODUCT_ID         0x5052  /* no EEPROM, no firmware */
 #define TI_5152_BOOT_PRODUCT_ID         0x5152  /* no EEPROM, no firmware */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a7f9513fa19d..69269f739563 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -995,6 +995,16 @@ UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
 
+/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+ * Support the following product :
+ *    "Dane-Elec MediaTouch"
+ */
+UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
+                "RockChip",
+                "MTP",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
  * This USB MP3/AVI player device fails and disconnects if more than 128
  * sectors (64kB) are read/written in a single command, and may be present
@@ -1251,6 +1261,13 @@ UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY),
 
+/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
+                "Argosy",
+                "Storage",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Flag will support Bulk devices which use a standards-violating 32-byte
  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
@@ -1589,6 +1606,13 @@ UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_NO_WP_DETECT ),
 
+/* Reported by The Solutor <thesolutor@gmail.com> */
+UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
+                "Sony Ericsson",
+                "MD400",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_DEVICE),
+
 /* Reported by Jan Mate <mate@fiit.stuba.sk>
  * and by Soeren Sonnenburg <kernel@nn7.de> */
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
@@ -2031,15 +2055,11 @@ UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
- * This entry is needed to bypass the ZeroCD mechanism
- * and to properly load as a modem device.
- */
-UNUSUAL_DEV(  0x19d2, 0x2000, 0x0000, 0x0000,
-                "Onda ET502HS",
-                "USB MMC Storage",
+UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
+                "ST",
+                "2A",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
-                US_FL_IGNORE_DEVICE),
+                US_FL_FIX_CAPACITY),
 
 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
  * and Renato Perini <rperini@email.it>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index c94f71980c1b..f0267706cb45 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -41,7 +41,7 @@ menuconfig FB
           You need an utility program called fbset to make full use of frame
           buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
           and the Framebuffer-HOWTO at
-          <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+          <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
           information.
 
           Say Y here and to the driver for your graphics board below if you