aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorRobert Hancock <hancockrwd@gmail.com>2009-09-13 01:54:47 -0400
committerJeff Garzik <jgarzik@redhat.com>2009-09-17 16:46:41 -0400
commit90950a2504b66d626a73f55ca949a2e79ff4b7c4 (patch)
treebba82b47c30ba97e3baacf8642d44e2ae1867d40 /drivers
parentff7cddf59e3618d29e12b061651ab3f5a53f4a98 (diff)
pata_amd: do not filter out valid modes in nv_mode_filter
On a Compaq Presario V3000 laptop (NVIDIA MCP51 chipset), pata_amd selects PIO0 mode for the PATA DVD-RAM drive instead of MWDMA2 which it supports: ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2 ata4: nv_mode_filter: 0x39f&0x7001->0x1, BIOS=0x0 (0x0) ACPI=0x7001 (60:600:0x11) ata4.00: configured for PIO0 For some reason, the BIOS-set UDMA configuration returns 0 and the ACPI _GTM reports that UDMA2 and PIO0 are enabled. This causes nv_mode_filter to end up allowing only PIO0 and UDMA0-2. Since the drive doesn't support UDMA we end up using PIO0. Since the controllers should always support PIO4, MWDMA2 and UDMA2 regardless of what cable type is used, let's make sure we don't filter out these modes regardless of what wacky settings the BIOS is using. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/pata_amd.c3
1 files changed, 3 insertions, 0 deletions
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 33a74f11171c..567f3f72774e 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -307,6 +307,9 @@ static unsigned long nv_mode_filter(struct ata_device *dev,
307 limit |= ATA_MASK_PIO; 307 limit |= ATA_MASK_PIO;
308 if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA))) 308 if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA)))
309 limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA; 309 limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA;
310 /* PIO4, MWDMA2, UDMA2 should always be supported regardless of
311 cable detection result */
312 limit |= ata_pack_xfermask(ATA_PIO4, ATA_MWDMA2, ATA_UDMA2);
310 313
311 ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, " 314 ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, "
312 "BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n", 315 "BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n",