[SERIAL] Expose 8250_pci setup/removal/suspend/resume functions

Re-jig the setup/removal/suspend/resume of 8250 pci ports so that they
know slightly less about how they're attached to a PCI device.  Expose
this as the new interface for registering PCI serial ports, as well as
the pciserial_board structure and associated flag definitions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 121 insertions, 112 deletions

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 7ca07651c10c..4e9084edfc7e 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -34,38 +34,6 @@
 #undef SERIAL_DEBUG_PCI
 
 /*
- * Definitions for PCI support.
- */
-#define FL_BASE_MASK            0x0007
-#define FL_BASE0                0x0000
-#define FL_BASE1                0x0001
-#define FL_BASE2                0x0002
-#define FL_BASE3                0x0003
-#define FL_BASE4                0x0004
-#define FL_GET_BASE(x)          (x & FL_BASE_MASK)
-
-/* Use successive BARs (PCI base address registers),
-   else use offset into some specified BAR */
-#define FL_BASE_BARS            0x0008
-
-/* do not assign an irq */
-#define FL_NOIRQ                0x0080
-
-/* Use the Base address register size to cap number of ports */
-#define FL_REGION_SZ_CAP        0x0100
-
-struct pciserial_board {
-        unsigned int flags;
-        unsigned int num_ports;
-        unsigned int base_baud;
-        unsigned int uart_offset;
-        unsigned int reg_shift;
-        unsigned int first_offset;
-};
-
-struct serial_private;
-
-/*
  * init function returns:
  *  > 0 - number of ports
  *  = 0 - use board->num_ports
@@ -1528,60 +1496,14 @@ serial_pci_matches(struct pciserial_board *board,
             board->first_offset == guessed->first_offset;
 }
 
-/*
- * Probe one serial board.  Unfortunately, there is no rhyme nor reason
- * to the arrangement of serial ports on a PCI card.
- */
-static int __devinit
-pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+struct serial_private *
+pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
 {
         struct uart_port serial_port;
         struct serial_private *priv;
-        struct pciserial_board *board, tmp;
         struct pci_serial_quirk *quirk;
         int rc, nr_ports, i;
 
-        if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
-                printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
-                        ent->driver_data);
-                return -EINVAL;
-        }
-
-        board = &pci_boards[ent->driver_data];
-
-        rc = pci_enable_device(dev);
-        if (rc)
-                return rc;
-
-        if (ent->driver_data == pbn_default) {
-                /*
-                 * Use a copy of the pci_board entry for this;
-                 * avoid changing entries in the table.
-                 */
-                memcpy(&tmp, board, sizeof(struct pciserial_board));
-                board = &tmp;
-
-                /*
-                 * We matched one of our class entries.  Try to
-                 * determine the parameters of this board.
-                 */
-                rc = serial_pci_guess_board(dev, board);
-                if (rc)
-                        goto disable;
-        } else {
-                /*
-                 * We matched an explicit entry.  If we are able to
-                 * detect this boards settings with our heuristic,
-                 * then we no longer need this entry.
-                 */
-                memcpy(&tmp, &pci_boards[pbn_default],
-                       sizeof(struct pciserial_board));
-                rc = serial_pci_guess_board(dev, &tmp);
-                if (rc == 0 && serial_pci_matches(board, &tmp))
-                        moan_device("Redundant entry in serial pci_table.",
-                                    dev);
-        }
-
         nr_ports = board->num_ports;
 
         /*
@@ -1598,8 +1520,10 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
          */
         if (quirk->init) {
                 rc = quirk->init(dev);
-                if (rc < 0)
-                        goto disable;
+                if (rc < 0) {
+                        priv = ERR_PTR(rc);
+                        goto err_out;
+                }
                 if (rc)
                         nr_ports = rc;
         }
@@ -1608,8 +1532,8 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
                        sizeof(unsigned int) * nr_ports,
                        GFP_KERNEL);
         if (!priv) {
-                rc = -ENOMEM;
-                goto deinit;
+                priv = ERR_PTR(-ENOMEM);
+                goto err_deinit;
         }
 
         memset(priv, 0, sizeof(struct serial_private) +
@@ -1617,7 +1541,6 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 
         priv->dev = dev;
         priv->quirk = quirk;
-        pci_set_drvdata(dev, priv);
 
         memset(&serial_port, 0, sizeof(struct uart_port));
         serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
@@ -1643,24 +1566,21 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 
         priv->nr = i;
 
-        return 0;
+        return priv;
 
- deinit:
+ err_deinit:
         if (quirk->exit)
                 quirk->exit(dev);
- disable:
-        pci_disable_device(dev);
-        return rc;
+ err_out:
+        return priv;
 }
+EXPORT_SYMBOL_GPL(pciserial_init_ports);
 
-static void __devexit pciserial_remove_one(struct pci_dev *dev)
+void pciserial_remove_ports(struct serial_private *priv)
 {
-        struct serial_private *priv = pci_get_drvdata(dev);
         struct pci_serial_quirk *quirk;
         int i;
 
-        pci_set_drvdata(dev, NULL);
-
         for (i = 0; i < priv->nr; i++)
                 serial8250_unregister_port(priv->line[i]);
 
@@ -1673,25 +1593,123 @@ static void __devexit pciserial_remove_one(struct pci_dev *dev)
         /*
          * Find the exit quirks.
          */
-        quirk = find_quirk(dev);
+        quirk = find_quirk(priv->dev);
         if (quirk->exit)
-                quirk->exit(dev);
+                quirk->exit(priv->dev);
+
+        kfree(priv);
+}
+EXPORT_SYMBOL_GPL(pciserial_remove_ports);
+
+void pciserial_suspend_ports(struct serial_private *priv)
+{
+        int i;
+
+        for (i = 0; i < priv->nr; i++)
+                if (priv->line[i] >= 0)
+                        serial8250_suspend_port(priv->line[i]);
+}
+EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
+
+void pciserial_resume_ports(struct serial_private *priv)
+{
+        int i;
+
+        /*
+         * Ensure that the board is correctly configured.
+         */
+        if (priv->quirk->init)
+                priv->quirk->init(priv->dev);
+
+        for (i = 0; i < priv->nr; i++)
+                if (priv->line[i] >= 0)
+                        serial8250_resume_port(priv->line[i]);
+}
+EXPORT_SYMBOL_GPL(pciserial_resume_ports);
+
+/*
+ * Probe one serial board.  Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int __devinit
+pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+        struct serial_private *priv;
+        struct pciserial_board *board, tmp;
+        int rc;
+
+        if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
+                printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
+                        ent->driver_data);
+                return -EINVAL;
+        }
+
+        board = &pci_boards[ent->driver_data];
+
+        rc = pci_enable_device(dev);
+        if (rc)
+                return rc;
+
+        if (ent->driver_data == pbn_default) {
+                /*
+                 * Use a copy of the pci_board entry for this;
+                 * avoid changing entries in the table.
+                 */
+                memcpy(&tmp, board, sizeof(struct pciserial_board));
+                board = &tmp;
+
+                /*
+                 * We matched one of our class entries.  Try to
+                 * determine the parameters of this board.
+                 */
+                rc = serial_pci_guess_board(dev, board);
+                if (rc)
+                        goto disable;
+        } else {
+                /*
+                 * We matched an explicit entry.  If we are able to
+                 * detect this boards settings with our heuristic,
+                 * then we no longer need this entry.
+                 */
+                memcpy(&tmp, &pci_boards[pbn_default],
+                       sizeof(struct pciserial_board));
+                rc = serial_pci_guess_board(dev, &tmp);
+                if (rc == 0 && serial_pci_matches(board, &tmp))
+                        moan_device("Redundant entry in serial pci_table.",
+                                    dev);
+        }
+
+        priv = pciserial_init_ports(dev, board);
+        if (!IS_ERR(priv)) {
+                pci_set_drvdata(dev, priv);
+                return 0;
+        }
+
+        rc = PTR_ERR(priv);
 
+ disable:
         pci_disable_device(dev);
+        return rc;
+}
 
-        kfree(priv);
+static void __devexit pciserial_remove_one(struct pci_dev *dev)
+{
+        struct serial_private *priv = pci_get_drvdata(dev);
+
+        pci_set_drvdata(dev, NULL);
+
+        pciserial_remove_ports(priv);
+
+        pci_disable_device(dev);
 }
 
 static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
 {
         struct serial_private *priv = pci_get_drvdata(dev);
 
-        if (priv) {
-                int i;
+        if (priv)
+                pciserial_suspend_ports(priv);
 
-                for (i = 0; i < priv->nr; i++)
-                        serial8250_suspend_port(priv->line[i]);
-        }
         pci_save_state(dev);
         pci_set_power_state(dev, pci_choose_state(dev, state));
         return 0;
@@ -1705,21 +1723,12 @@ static int pciserial_resume_one(struct pci_dev *dev)
         pci_restore_state(dev);
 
         if (priv) {
-                int i;
-
                 /*
                  * The device may have been disabled.  Re-enable it.
                  */
                 pci_enable_device(dev);
 
-                /*
-                 * Ensure that the board is correctly configured.
-                 */
-                if (priv->quirk->init)
-                        priv->quirk->init(dev);
-
-                for (i = 0; i < priv->nr; i++)
-                        serial8250_resume_port(priv->line[i]);
+                pciserial_resume_ports(priv);
         }
         return 0;
 }