cmd64x: fix PIO mode setup (take 3)

The driver's tuneproc() method fails to set the drive's own speed -- fix this
by renaming the function to cmd64x_tune_pio(), making it return the mode set,
and "wrapping" the new tuneproc() method around it; while at it, also get rid
of the non-working prefetch control code (filtering out related argument values
in the "wrapper"), remove redundant PIO5 mode limitation, make cmdprintk() give
more sensible mode info, and remove mention about the obsolete /proc/ interface.
Get rid of the broken config_chipset_for_pio() which always tried to set PIO4,
switch to always auto-tuning PIO instead.
Oh, and add the missing PIO5 support to the speedproc() method while at it. :-)

Warning: compile tested only -- getting to the real hardware isn't that easy...

On Tuesday 06 February 2007 22:11, Mikael Pettersson <mikpe@it.uu.se> wrote:
> 
> Worked fine on my SPARC Ultra5 with a CMD646 IDE controller.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 43 insertions, 65 deletions

diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 49df27513da7..b0d4825c56a9 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -1,6 +1,6 @@
 /* $Id: cmd64x.c,v 1.21 2000/01/30 23:23:16
  *
- * linux/drivers/ide/pci/cmd64x.c               Version 1.30    Sept 10, 2002
+ * linux/drivers/ide/pci/cmd64x.c               Version 1.41    Feb 3, 2007
  *
  * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
  *           Note, this driver is not used at all on other systems because
@@ -12,6 +12,7 @@
  * Copyright (C) 1998           David S. Miller (davem@redhat.com)
  *
  * Copyright (C) 1999-2002      Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2007           MontaVista Software, Inc. <source@mvista.com>
  */
 
 #include <linux/module.h>
@@ -262,43 +263,25 @@ static void program_drive_counts (ide_drive_t *drive, int setup_count, int activ
 }
 
 /*
- * Attempts to set the interface PIO mode.
- * The preferred method of selecting PIO modes (e.g. mode 4) is 
- * "echo 'piomode:4' > /proc/ide/hdx/settings".  Special cases are
- * 8: prefetch off, 9: prefetch on, 255: auto-select best mode.
- * Called with 255 at boot time.
+ * This routine selects drive's best PIO mode, calculates setup/active/recovery
+ * counts, and then writes them into the chipset registers.
  */
-
-static void cmd64x_tuneproc (ide_drive_t *drive, u8 mode_wanted)
+static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
 {
         int setup_time, active_time, recovery_time;
         int clock_time, pio_mode, cycle_time;
         u8 recovery_count2, cycle_count;
         int setup_count, active_count, recovery_count;
         int bus_speed = system_bus_clock();
-        /*byte b;*/
         ide_pio_data_t  d;
 
-        switch (mode_wanted) {
-                case 8: /* set prefetch off */
-                case 9: /* set prefetch on */
-                        mode_wanted &= 1;
-                        /*set_prefetch_mode(index, mode_wanted);*/
-                        cmdprintk("%s: %sabled cmd640 prefetch\n",
-                                drive->name, mode_wanted ? "en" : "dis");
-                        return;
-        }
-
-        mode_wanted = ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
-        pio_mode = d.pio_mode;
+        pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, &d);
         cycle_time = d.cycle_time;
 
         /*
          * I copied all this complicated stuff from cmd640.c and made a few
          * minor changes.  For now I am just going to pray that it is correct.
          */
-        if (pio_mode > 5)
-                pio_mode = 5;
         setup_time  = ide_pio_timings[pio_mode].setup_time;
         active_time = ide_pio_timings[pio_mode].active_time;
         recovery_time = cycle_time - (setup_time + active_time);
@@ -320,22 +303,33 @@ static void cmd64x_tuneproc (ide_drive_t *drive, u8 mode_wanted)
         if (active_count > 16)
                 active_count = 16; /* maximum allowed by cmd646 */
 
-        /*
-         * In a perfect world, we might set the drive pio mode here
-         * (using WIN_SETFEATURE) before continuing.
-         *
-         * But we do not, because:
-         *      1) this is the wrong place to do it
-         *              (proper is do_special() in ide.c)
-         *      2) in practice this is rarely, if ever, necessary
-         */
         program_drive_counts (drive, setup_count, active_count, recovery_count);
 
-        cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns)%s, "
+        cmdprintk("%s: PIO mode wanted %d, selected %d (%dns)%s, "
                 "clocks=%d/%d/%d\n",
-                drive->name, pio_mode, mode_wanted, cycle_time,
+                drive->name, mode_wanted, pio_mode, cycle_time,
                 d.overridden ? " (overriding vendor mode)" : "",
                 setup_count, active_count, recovery_count);
+
+        return pio_mode;
+}
+
+/*
+ * Attempts to set drive's PIO mode.
+ * Special cases are 8: prefetch off, 9: prefetch on (both never worked),
+ * and 255: auto-select best mode (used at boot time).
+ */
+static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
+{
+        /*
+         * Filter out the prefetch control values
+         * to prevent PIO5 from being programmed
+         */
+        if (pio == 8 || pio == 9)
+                return;
+
+        pio = cmd64x_tune_pio(drive, pio);
+        (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
 
 static u8 cmd64x_ratemask (ide_drive_t *drive)
@@ -387,22 +381,6 @@ static u8 cmd64x_ratemask (ide_drive_t *drive)
         return mode;
 }
 
-static void config_cmd64x_chipset_for_pio (ide_drive_t *drive, u8 set_speed)
-{
-        u8 speed        = 0x00;
-        u8 set_pio      = ide_get_best_pio_mode(drive, 4, 5, NULL);
-
-        cmd64x_tuneproc(drive, set_pio);
-        speed = XFER_PIO_0 + set_pio;
-        if (set_speed)
-                (void) ide_config_drive_speed(drive, speed);
-}
-
-static void config_chipset_for_pio (ide_drive_t *drive, u8 set_speed)
-{
-        config_cmd64x_chipset_for_pio(drive, set_speed);
-}
-
 static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 {
         ide_hwif_t *hwif        = HWIF(drive);
@@ -414,7 +392,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 
         u8 speed        = ide_rate_filter(cmd64x_ratemask(drive), xferspeed);
 
-        if (speed > XFER_PIO_4) {
+        if (speed >= XFER_SW_DMA_0) {
                 (void) pci_read_config_byte(dev, pciD, &regD);
                 (void) pci_read_config_byte(dev, pciU, &regU);
                 regD &= ~(unit ? 0x40 : 0x20);
@@ -438,17 +416,20 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
                 case XFER_SW_DMA_2:     regD |= (unit ? 0x40 : 0x10); break;
                 case XFER_SW_DMA_1:     regD |= (unit ? 0x80 : 0x20); break;
                 case XFER_SW_DMA_0:     regD |= (unit ? 0xC0 : 0x30); break;
-                case XFER_PIO_4:        cmd64x_tuneproc(drive, 4); break;
-                case XFER_PIO_3:        cmd64x_tuneproc(drive, 3); break;
-                case XFER_PIO_2:        cmd64x_tuneproc(drive, 2); break;
-                case XFER_PIO_1:        cmd64x_tuneproc(drive, 1); break;
-                case XFER_PIO_0:        cmd64x_tuneproc(drive, 0); break;
+                case XFER_PIO_5:
+                case XFER_PIO_4:
+                case XFER_PIO_3:
+                case XFER_PIO_2:
+                case XFER_PIO_1:
+                case XFER_PIO_0:
+                        (void) cmd64x_tune_pio(drive, speed - XFER_PIO_0);
+                        break;
 
                 default:
                         return 1;
         }
 
-        if (speed > XFER_PIO_4) {
+        if (speed >= XFER_SW_DMA_0) {
                 (void) pci_write_config_byte(dev, pciU, regU);
                 regD |= (unit ? 0x40 : 0x20);
                 (void) pci_write_config_byte(dev, pciD, regD);
@@ -461,8 +442,6 @@ static int config_chipset_for_dma (ide_drive_t *drive)
 {
         u8 speed        = ide_dma_speed(drive, cmd64x_ratemask(drive));
 
-        config_chipset_for_pio(drive, !speed);
-
         if (!speed)
                 return 0;
 
@@ -478,7 +457,7 @@ static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
                 return 0;
 
         if (ide_use_fast_pio(drive))
-                config_chipset_for_pio(drive, 1);
+                cmd64x_tune_drive(drive, 255);
 
         return -1;
 }
@@ -679,14 +658,13 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
         pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
         class_rev &= 0xff;
 
-        hwif->tuneproc  = &cmd64x_tuneproc;
+        hwif->tuneproc  = &cmd64x_tune_drive;
         hwif->speedproc = &cmd64x_tune_chipset;
 
-        if (!hwif->dma_base) {
-                hwif->drives[0].autotune = 1;
-                hwif->drives[1].autotune = 1;
+        hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+
+        if (!hwif->dma_base)
                 return;
-        }
 
         hwif->atapi_dma = 1;