hwmon/ds1621: Fix swapped temperature limits

The low temperature limit and the high temperature limit registers
have been accidentally swapped, causing alarms to trigger
when they shouldn't.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>

1 files changed, 4 insertions, 4 deletions

diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index c849c0c6ee9c..d5ac422d73b2 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -53,8 +53,8 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low")
 
 /* The DS1621 registers */
 #define DS1621_REG_TEMP                 0xAA /* word, RO */
-#define DS1621_REG_TEMP_MIN             0xA1 /* word, RW */
-#define DS1621_REG_TEMP_MAX             0xA2 /* word, RW */
+#define DS1621_REG_TEMP_MIN             0xA2 /* word, RW */
+#define DS1621_REG_TEMP_MAX             0xA1 /* word, RW */
 #define DS1621_REG_CONF                 0xAC /* byte, RW */
 #define DS1621_COM_START                0xEE /* no data */
 #define DS1621_COM_STOP                 0x22 /* no data */
@@ -328,9 +328,9 @@ static struct ds1621_data *ds1621_update_client(struct device *dev)
 
                 /* reset alarms if necessary */
                 new_conf = data->conf;
-                if (data->temp < data->temp_min)
+                if (data->temp > data->temp_min)
                         new_conf &= ~DS1621_ALARM_TEMP_LOW;
-                if (data->temp > data->temp_max)
+                if (data->temp < data->temp_max)
                         new_conf &= ~DS1621_ALARM_TEMP_HIGH;
                 if (data->conf != new_conf)
                         ds1621_write_value(client, DS1621_REG_CONF,