[WATCHDOG] iTCO_wdt: fix SMI_EN regression 2

bugzilla: #12363
commit 7cd5b08be3c489df11b559fef210b81133764ad4 added a second regression:
some Dell's and Compaq's lockup on boot. So we revert most of the code.
The ICH9 reboot issue remains in place and will need some more fixing... :-(

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

3 files changed, 43 insertions, 26 deletions

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 09a3d5522b43..325c10ff6a2c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -406,7 +406,7 @@ config ITCO_WDT
         ---help---
           Hardware driver for the intel TCO timer based watchdog devices.
           These drivers are included in the Intel 82801 I/O Controller
-          Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+          Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
           controller hub.
 
           The TCO (Total Cost of Ownership) timer is a watchdog timer
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index 2474ebca88f6..d8264ad0be41 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -1,7 +1,7 @@
 /*
  *      intel TCO vendor specific watchdog driver support
  *
- *      (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *      (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -19,7 +19,7 @@
 
 /* Module and version information */
 #define DRV_NAME        "iTCO_vendor_support"
-#define DRV_VERSION     "1.02"
+#define DRV_VERSION     "1.03"
 #define PFX             DRV_NAME ": "
 
 /* Includes */
@@ -77,6 +77,26 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n
  *          20.6 seconds.
  */
 
+static void supermicro_old_pre_start(unsigned long acpibase)
+{
+        unsigned long val32;
+
+        /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+        val32 = inl(SMI_EN);
+        val32 &= 0xffffdfff;    /* Turn off SMI clearing watchdog */
+        outl(val32, SMI_EN);    /* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(unsigned long acpibase)
+{
+        unsigned long val32;
+
+        /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+        val32 = inl(SMI_EN);
+        val32 |= 0x00002000;    /* Turn on SMI clearing watchdog */
+        outl(val32, SMI_EN);    /* Needed to deactivate watchdog */
+}
+
 static void supermicro_old_pre_keepalive(unsigned long acpibase)
 {
         /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
@@ -228,14 +248,18 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
 void iTCO_vendor_pre_start(unsigned long acpibase,
                            unsigned int heartbeat)
 {
-        if (vendorsupport == SUPERMICRO_NEW_BOARD)
+        if (vendorsupport == SUPERMICRO_OLD_BOARD)
+                supermicro_old_pre_start(acpibase);
+        else if (vendorsupport == SUPERMICRO_NEW_BOARD)
                 supermicro_new_pre_start(heartbeat);
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_start);
 
 void iTCO_vendor_pre_stop(unsigned long acpibase)
 {
-        if (vendorsupport == SUPERMICRO_NEW_BOARD)
+        if (vendorsupport == SUPERMICRO_OLD_BOARD)
+                supermicro_old_pre_stop(acpibase);
+        else if (vendorsupport == SUPERMICRO_NEW_BOARD)
                 supermicro_new_pre_stop();
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_stop);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 5b395a4ddfdf..352334947ea3 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -1,7 +1,7 @@
 /*
- *      intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
+ *      intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets)
  *
- *      (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *      (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -63,7 +63,7 @@
 
 /* Module and version information */
 #define DRV_NAME        "iTCO_wdt"
-#define DRV_VERSION     "1.04"
+#define DRV_VERSION     "1.05"
 #define PFX             DRV_NAME ": "
 
 /* Includes */
@@ -236,16 +236,16 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
 
 /* Address definitions for the TCO */
 /* TCO base address */
-#define TCOBASE         iTCO_wdt_private.ACPIBASE + 0x60
+#define TCOBASE         iTCO_wdt_private.ACPIBASE + 0x60
 /* SMI Control and Enable Register */
-#define SMI_EN          iTCO_wdt_private.ACPIBASE + 0x30
+#define SMI_EN          iTCO_wdt_private.ACPIBASE + 0x30
 
 #define TCO_RLD         TCOBASE + 0x00  /* TCO Timer Reload and Curr. Value */
 #define TCOv1_TMR       TCOBASE + 0x01  /* TCOv1 Timer Initial Value    */
-#define TCO_DAT_IN      TCOBASE + 0x02  /* TCO Data In Register         */
-#define TCO_DAT_OUT     TCOBASE + 0x03  /* TCO Data Out Register        */
-#define TCO1_STS        TCOBASE + 0x04  /* TCO1 Status Register         */
-#define TCO2_STS        TCOBASE + 0x06  /* TCO2 Status Register         */
+#define TCO_DAT_IN      TCOBASE + 0x02  /* TCO Data In Register         */
+#define TCO_DAT_OUT     TCOBASE + 0x03  /* TCO Data Out Register        */
+#define TCO1_STS        TCOBASE + 0x04  /* TCO1 Status Register         */
+#define TCO2_STS        TCOBASE + 0x06  /* TCO2 Status Register         */
 #define TCO1_CNT        TCOBASE + 0x08  /* TCO1 Control Register        */
 #define TCO2_CNT        TCOBASE + 0x0a  /* TCO2 Control Register        */
 #define TCOv2_TMR       TCOBASE + 0x12  /* TCOv2 Timer Initial Value    */
@@ -338,7 +338,6 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void)
 static int iTCO_wdt_start(void)
 {
         unsigned int val;
-        unsigned long val32;
 
         spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -351,11 +350,6 @@ static int iTCO_wdt_start(void)
                 return -EIO;
         }
 
-        /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
-        val32 = inl(SMI_EN);
-        val32 &= 0xffffdfff;    /* Turn off SMI clearing watchdog */
-        outl(val32, SMI_EN);
-
         /* Force the timer to its reload value by writing to the TCO_RLD
            register */
         if (iTCO_wdt_private.iTCO_version == 2)
@@ -378,7 +372,6 @@ static int iTCO_wdt_start(void)
 static int iTCO_wdt_stop(void)
 {
         unsigned int val;
-        unsigned long val32;
 
         spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -390,11 +383,6 @@ static int iTCO_wdt_stop(void)
         outw(val, TCO1_CNT);
         val = inw(TCO1_CNT);
 
-        /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
-        val32 = inl(SMI_EN);
-        val32 |= 0x00002000;
-        outl(val32, SMI_EN);
-
         /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
         iTCO_wdt_set_NO_REBOOT_bit();
 
@@ -649,6 +637,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
         int ret;
         u32 base_address;
         unsigned long RCBA;
+        unsigned long val32;
 
         /*
          *      Find the ACPI/PM base I/O address which is the base
@@ -695,6 +684,10 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
                 ret = -EIO;
                 goto out;
         }
+        /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+        val32 = inl(SMI_EN);
+        val32 &= 0xffffdfff;    /* Turn off SMI clearing watchdog */
+        outl(val32, SMI_EN);
 
         /* The TCO I/O registers reside in a 32-byte range pointed to
            by the TCOBASE value */