diff options
author | Krzysztof Halasa <khc@pm.waw.pl> | 2008-04-20 13:06:39 -0400 |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2008-04-29 01:56:50 -0400 |
commit | dac2f83fce01f0c2900918a4a8abd4c652151804 (patch) | |
tree | 1ff0775cc0d07fa382cfe54cb233729e12b9e576 /drivers | |
parent | 770f867991155f9c9e36a845a142f770d55ee67c (diff) |
Driver for IXP4xx built-in Ethernet ports
Adds a driver for built-in IXP4xx Ethernet ports.
Signed-off-by: Krzysztof HaĆasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/arm/Kconfig | 8 | ||||
-rw-r--r-- | drivers/net/arm/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/arm/ixp4xx_eth.c | 1265 |
3 files changed, 1274 insertions, 0 deletions
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index f9cc2b621fe2..8eda6eeb43b7 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig | |||
@@ -47,3 +47,11 @@ config EP93XX_ETH | |||
47 | help | 47 | help |
48 | This is a driver for the ethernet hardware included in EP93xx CPUs. | 48 | This is a driver for the ethernet hardware included in EP93xx CPUs. |
49 | Say Y if you are building a kernel for EP93xx based devices. | 49 | Say Y if you are building a kernel for EP93xx based devices. |
50 | |||
51 | config IXP4XX_ETH | ||
52 | tristate "Intel IXP4xx Ethernet support" | ||
53 | depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR | ||
54 | select MII | ||
55 | help | ||
56 | Say Y here if you want to use built-in Ethernet ports | ||
57 | on IXP4xx processor. | ||
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile index a4c868278e11..7c812ac2b6a5 100644 --- a/drivers/net/arm/Makefile +++ b/drivers/net/arm/Makefile | |||
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o | |||
9 | obj-$(CONFIG_ARM_ETHER1) += ether1.o | 9 | obj-$(CONFIG_ARM_ETHER1) += ether1.o |
10 | obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o | 10 | obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o |
11 | obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o | 11 | obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o |
12 | obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o | ||
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c new file mode 100644 index 000000000000..c617b64c288e --- /dev/null +++ b/drivers/net/arm/ixp4xx_eth.c | |||
@@ -0,0 +1,1265 @@ | |||
1 | /* | ||
2 | * Intel IXP4xx Ethernet driver for Linux | ||
3 | * | ||
4 | * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify it | ||
7 | * under the terms of version 2 of the GNU General Public License | ||
8 | * as published by the Free Software Foundation. | ||
9 | * | ||
10 | * Ethernet port config (0x00 is not present on IXP42X): | ||
11 | * | ||
12 | * logical port 0x00 0x10 0x20 | ||
13 | * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C) | ||
14 | * physical PortId 2 0 1 | ||
15 | * TX queue 23 24 25 | ||
16 | * RX-free queue 26 27 28 | ||
17 | * TX-done queue is always 31, per-port RX and TX-ready queues are configurable | ||
18 | * | ||
19 | * | ||
20 | * Queue entries: | ||
21 | * bits 0 -> 1 - NPE ID (RX and TX-done) | ||
22 | * bits 0 -> 2 - priority (TX, per 802.1D) | ||
23 | * bits 3 -> 4 - port ID (user-set?) | ||
24 | * bits 5 -> 31 - physical descriptor address | ||
25 | */ | ||
26 | |||
27 | #include <linux/delay.h> | ||
28 | #include <linux/dma-mapping.h> | ||
29 | #include <linux/dmapool.h> | ||
30 | #include <linux/etherdevice.h> | ||
31 | #include <linux/io.h> | ||
32 | #include <linux/kernel.h> | ||
33 | #include <linux/mii.h> | ||
34 | #include <linux/platform_device.h> | ||
35 | #include <asm/arch/npe.h> | ||
36 | #include <asm/arch/qmgr.h> | ||
37 | |||
38 | #define DEBUG_QUEUES 0 | ||
39 | #define DEBUG_DESC 0 | ||
40 | #define DEBUG_RX 0 | ||
41 | #define DEBUG_TX 0 | ||
42 | #define DEBUG_PKT_BYTES 0 | ||
43 | #define DEBUG_MDIO 0 | ||
44 | #define DEBUG_CLOSE 0 | ||
45 | |||
46 | #define DRV_NAME "ixp4xx_eth" | ||
47 | |||
48 | #define MAX_NPES 3 | ||
49 | |||
50 | #define RX_DESCS 64 /* also length of all RX queues */ | ||
51 | #define TX_DESCS 16 /* also length of all TX queues */ | ||
52 | #define TXDONE_QUEUE_LEN 64 /* dwords */ | ||
53 | |||
54 | #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS)) | ||
55 | #define REGS_SIZE 0x1000 | ||
56 | #define MAX_MRU 1536 /* 0x600 */ | ||
57 | #define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4) | ||
58 | |||
59 | #define NAPI_WEIGHT 16 | ||
60 | #define MDIO_INTERVAL (3 * HZ) | ||
61 | #define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */ | ||
62 | #define MAX_MII_RESET_RETRIES 100 /* mdio_read() cycles, typically 4 */ | ||
63 | #define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */ | ||
64 | |||
65 | #define NPE_ID(port_id) ((port_id) >> 4) | ||
66 | #define PHYSICAL_ID(port_id) ((NPE_ID(port_id) + 2) % 3) | ||
67 | #define TX_QUEUE(port_id) (NPE_ID(port_id) + 23) | ||
68 | #define RXFREE_QUEUE(port_id) (NPE_ID(port_id) + 26) | ||
69 | #define TXDONE_QUEUE 31 | ||
70 | |||
71 | /* TX Control Registers */ | ||
72 | #define TX_CNTRL0_TX_EN 0x01 | ||
73 | #define TX_CNTRL0_HALFDUPLEX 0x02 | ||
74 | #define TX_CNTRL0_RETRY 0x04 | ||
75 | #define TX_CNTRL0_PAD_EN 0x08 | ||
76 | #define TX_CNTRL0_APPEND_FCS 0x10 | ||
77 | #define TX_CNTRL0_2DEFER 0x20 | ||
78 | #define TX_CNTRL0_RMII 0x40 /* reduced MII */ | ||
79 | #define TX_CNTRL1_RETRIES 0x0F /* 4 bits */ | ||
80 | |||
81 | /* RX Control Registers */ | ||
82 | #define RX_CNTRL0_RX_EN 0x01 | ||
83 | #define RX_CNTRL0_PADSTRIP_EN 0x02 | ||
84 | #define RX_CNTRL0_SEND_FCS 0x04 | ||
85 | #define RX_CNTRL0_PAUSE_EN 0x08 | ||
86 | #define RX_CNTRL0_LOOP_EN 0x10 | ||
87 | #define RX_CNTRL0_ADDR_FLTR_EN 0x20 | ||
88 | #define RX_CNTRL0_RX_RUNT_EN 0x40 | ||
89 | #define RX_CNTRL0_BCAST_DIS 0x80 | ||
90 | #define RX_CNTRL1_DEFER_EN 0x01 | ||
91 | |||
92 | /* Core Control Register */ | ||
93 | #define CORE_RESET 0x01 | ||
94 | #define CORE_RX_FIFO_FLUSH 0x02 | ||
95 | #define CORE_TX_FIFO_FLUSH 0x04 | ||
96 | #define CORE_SEND_JAM 0x08 | ||
97 | #define CORE_MDC_EN 0x10 /* MDIO using NPE-B ETH-0 only */ | ||
98 | |||
99 | #define DEFAULT_TX_CNTRL0 (TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | \ | ||
100 | TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \ | ||
101 | TX_CNTRL0_2DEFER) | ||
102 | #define DEFAULT_RX_CNTRL0 RX_CNTRL0_RX_EN | ||
103 | #define DEFAULT_CORE_CNTRL CORE_MDC_EN | ||
104 | |||
105 | |||
106 | /* NPE message codes */ | ||
107 | #define NPE_GETSTATUS 0x00 | ||
108 | #define NPE_EDB_SETPORTADDRESS 0x01 | ||
109 | #define NPE_EDB_GETMACADDRESSDATABASE 0x02 | ||
110 | #define NPE_EDB_SETMACADDRESSSDATABASE 0x03 | ||
111 | #define NPE_GETSTATS 0x04 | ||
112 | #define NPE_RESETSTATS 0x05 | ||
113 | #define NPE_SETMAXFRAMELENGTHS 0x06 | ||
114 | #define NPE_VLAN_SETRXTAGMODE 0x07 | ||
115 | #define NPE_VLAN_SETDEFAULTRXVID 0x08 | ||
116 | #define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09 | ||
117 | #define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A | ||
118 | #define NPE_VLAN_SETRXQOSENTRY 0x0B | ||
119 | #define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C | ||
120 | #define NPE_STP_SETBLOCKINGSTATE 0x0D | ||
121 | #define NPE_FW_SETFIREWALLMODE 0x0E | ||
122 | #define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F | ||
123 | #define NPE_PC_SETAPMACTABLE 0x11 | ||
124 | #define NPE_SETLOOPBACK_MODE 0x12 | ||
125 | #define NPE_PC_SETBSSIDTABLE 0x13 | ||
126 | #define NPE_ADDRESS_FILTER_CONFIG 0x14 | ||
127 | #define NPE_APPENDFCSCONFIG 0x15 | ||
128 | #define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16 | ||
129 | #define NPE_MAC_RECOVERY_START 0x17 | ||
130 | |||
131 | |||
132 | #ifdef __ARMEB__ | ||
133 | typedef struct sk_buff buffer_t; | ||
134 | #define free_buffer dev_kfree_skb | ||
135 | #define free_buffer_irq dev_kfree_skb_irq | ||
136 | #else | ||
137 | typedef void buffer_t; | ||
138 | #define free_buffer kfree | ||
139 | #define free_buffer_irq kfree | ||
140 | #endif | ||
141 | |||
142 | struct eth_regs { | ||
143 | u32 tx_control[2], __res1[2]; /* 000 */ | ||
144 | u32 rx_control[2], __res2[2]; /* 010 */ | ||
145 | u32 random_seed, __res3[3]; /* 020 */ | ||
146 | u32 partial_empty_threshold, __res4; /* 030 */ | ||
147 | u32 partial_full_threshold, __res5; /* 038 */ | ||
148 | u32 tx_start_bytes, __res6[3]; /* 040 */ | ||
149 | u32 tx_deferral, rx_deferral, __res7[2];/* 050 */ | ||
150 | u32 tx_2part_deferral[2], __res8[2]; /* 060 */ | ||
151 | u32 slot_time, __res9[3]; /* 070 */ | ||
152 | u32 mdio_command[4]; /* 080 */ | ||
153 | u32 mdio_status[4]; /* 090 */ | ||
154 | u32 mcast_mask[6], __res10[2]; /* 0A0 */ | ||
155 | u32 mcast_addr[6], __res11[2]; /* 0C0 */ | ||
156 | u32 int_clock_threshold, __res12[3]; /* 0E0 */ | ||
157 | u32 hw_addr[6], __res13[61]; /* 0F0 */ | ||
158 | u32 core_control; /* 1FC */ | ||
159 | }; | ||
160 | |||
161 | struct port { | ||
162 | struct resource *mem_res; | ||
163 | struct eth_regs __iomem *regs; | ||
164 | struct npe *npe; | ||
165 | struct net_device *netdev; | ||
166 | struct napi_struct napi; | ||
167 | struct net_device_stats stat; | ||
168 | struct mii_if_info mii; | ||
169 | struct delayed_work mdio_thread; | ||
170 | struct eth_plat_info *plat; | ||
171 | buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS]; | ||
172 | struct desc *desc_tab; /* coherent */ | ||
173 | u32 desc_tab_phys; | ||
174 | int id; /* logical port ID */ | ||
175 | u16 mii_bmcr; | ||
176 | }; | ||
177 | |||
178 | /* NPE message structure */ | ||
179 | struct msg { | ||
180 | #ifdef __ARMEB__ | ||
181 | u8 cmd, eth_id, byte2, byte3; | ||
182 | u8 byte4, byte5, byte6, byte7; | ||
183 | #else | ||
184 | u8 byte3, byte2, eth_id, cmd; | ||
185 | u8 byte7, byte6, byte5, byte4; | ||
186 | #endif | ||
187 | }; | ||
188 | |||
189 | /* Ethernet packet descriptor */ | ||
190 | struct desc { | ||
191 | u32 next; /* pointer to next buffer, unused */ | ||
192 | |||
193 | #ifdef __ARMEB__ | ||
194 | u16 buf_len; /* buffer length */ | ||
195 | u16 pkt_len; /* packet length */ | ||
196 | u32 data; /* pointer to data buffer in RAM */ | ||
197 | u8 dest_id; | ||
198 | u8 src_id; | ||
199 | u16 flags; | ||
200 | u8 qos; | ||
201 | u8 padlen; | ||
202 | u16 vlan_tci; | ||
203 | #else | ||
204 | u16 pkt_len; /* packet length */ | ||
205 | u16 buf_len; /* buffer length */ | ||
206 | u32 data; /* pointer to data buffer in RAM */ | ||
207 | u16 flags; | ||
208 | u8 src_id; | ||
209 | u8 dest_id; | ||
210 | u16 vlan_tci; | ||
211 | u8 padlen; | ||
212 | u8 qos; | ||
213 | #endif | ||
214 | |||
215 | #ifdef __ARMEB__ | ||
216 | u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3; | ||
217 | u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1; | ||
218 | u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5; | ||
219 | #else | ||
220 | u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0; | ||
221 | u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4; | ||
222 | u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2; | ||
223 | #endif | ||
224 | }; | ||
225 | |||
226 | |||
227 | #define rx_desc_phys(port, n) ((port)->desc_tab_phys + \ | ||
228 | (n) * sizeof(struct desc)) | ||
229 | #define rx_desc_ptr(port, n) (&(port)->desc_tab[n]) | ||
230 | |||
231 | #define tx_desc_phys(port, n) ((port)->desc_tab_phys + \ | ||
232 | ((n) + RX_DESCS) * sizeof(struct desc)) | ||
233 | #define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS]) | ||
234 | |||
235 | #ifndef __ARMEB__ | ||
236 | static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt) | ||
237 | { | ||
238 | int i; | ||
239 | for (i = 0; i < cnt; i++) | ||
240 | dest[i] = swab32(src[i]); | ||
241 | } | ||
242 | #endif | ||
243 | |||
244 | static spinlock_t mdio_lock; | ||
245 | static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */ | ||
246 | static int ports_open; | ||
247 | static struct port *npe_port_tab[MAX_NPES]; | ||
248 | static struct dma_pool *dma_pool; | ||
249 | |||
250 | |||
251 | static u16 mdio_cmd(struct net_device *dev, int phy_id, int location, | ||
252 | int write, u16 cmd) | ||
253 | { | ||
254 | int cycles = 0; | ||
255 | |||
256 | if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) { | ||
257 | printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name); | ||
258 | return 0; | ||
259 | } | ||
260 | |||
261 | if (write) { | ||
262 | __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]); | ||
263 | __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]); | ||
264 | } | ||
265 | __raw_writel(((phy_id << 5) | location) & 0xFF, | ||
266 | &mdio_regs->mdio_command[2]); | ||
267 | __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */, | ||
268 | &mdio_regs->mdio_command[3]); | ||
269 | |||
270 | while ((cycles < MAX_MDIO_RETRIES) && | ||
271 | (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) { | ||
272 | udelay(1); | ||
273 | cycles++; | ||
274 | } | ||
275 | |||
276 | if (cycles == MAX_MDIO_RETRIES) { | ||
277 | printk(KERN_ERR "%s: MII write failed\n", dev->name); | ||
278 | return 0; | ||
279 | } | ||
280 | |||
281 | #if DEBUG_MDIO | ||
282 | printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name, | ||
283 | cycles); | ||
284 | #endif | ||
285 | |||
286 | if (write) | ||
287 | return 0; | ||
288 | |||
289 | if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) { | ||
290 | printk(KERN_ERR "%s: MII read failed\n", dev->name); | ||
291 | return 0; | ||
292 | } | ||
293 | |||
294 | return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) | | ||
295 | (__raw_readl(&mdio_regs->mdio_status[1]) << 8); | ||
296 | } | ||
297 | |||
298 | static int mdio_read(struct net_device *dev, int phy_id, int location) | ||
299 | { | ||
300 | unsigned long flags; | ||
301 | u16 val; | ||
302 | |||
303 | spin_lock_irqsave(&mdio_lock, flags); | ||
304 | val = mdio_cmd(dev, phy_id, location, 0, 0); | ||
305 | spin_unlock_irqrestore(&mdio_lock, flags); | ||
306 | return val; | ||
307 | } | ||
308 | |||
309 | static void mdio_write(struct net_device *dev, int phy_id, int location, | ||
310 | int val) | ||
311 | { | ||
312 | unsigned long flags; | ||
313 | |||
314 | spin_lock_irqsave(&mdio_lock, flags); | ||
315 | mdio_cmd(dev, phy_id, location, 1, val); | ||
316 | spin_unlock_irqrestore(&mdio_lock, flags); | ||
317 | } | ||
318 | |||
319 | static void phy_reset(struct net_device *dev, int phy_id) | ||
320 | { | ||
321 | struct port *port = netdev_priv(dev); | ||
322 | int cycles = 0; | ||
323 | |||
324 | mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET); | ||
325 | |||
326 | while (cycles < MAX_MII_RESET_RETRIES) { | ||
327 | if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) { | ||
328 | #if DEBUG_MDIO | ||
329 | printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n", | ||
330 | dev->name, cycles); | ||
331 | #endif | ||
332 | return; | ||
333 | } | ||
334 | udelay(1); | ||
335 | cycles++; | ||
336 | } | ||
337 | |||
338 | printk(KERN_ERR "%s: MII reset failed\n", dev->name); | ||
339 | } | ||
340 | |||
341 | static void eth_set_duplex(struct port *port) | ||
342 | { | ||
343 | if (port->mii.full_duplex) | ||
344 | __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX, | ||
345 | &port->regs->tx_control[0]); | ||
346 | else | ||
347 | __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX, | ||
348 | &port->regs->tx_control[0]); | ||
349 | } | ||
350 | |||
351 | |||
352 | static void phy_check_media(struct port *port, int init) | ||
353 | { | ||
354 | if (mii_check_media(&port->mii, 1, init)) | ||
355 | eth_set_duplex(port); | ||
356 | if (port->mii.force_media) { /* mii_check_media() doesn't work */ | ||
357 | struct net_device *dev = port->netdev; | ||
358 | int cur_link = mii_link_ok(&port->mii); | ||
359 | int prev_link = netif_carrier_ok(dev); | ||
360 | |||
361 | if (!prev_link && cur_link) { | ||
362 | printk(KERN_INFO "%s: link up\n", dev->name); | ||
363 | netif_carrier_on(dev); | ||
364 | } else if (prev_link && !cur_link) { | ||
365 | printk(KERN_INFO "%s: link down\n", dev->name); | ||
366 | netif_carrier_off(dev); | ||
367 | } | ||
368 | } | ||
369 | } | ||
370 | |||
371 | |||
372 | static void mdio_thread(struct work_struct *work) | ||
373 | { | ||
374 | struct port *port = container_of(work, struct port, mdio_thread.work); | ||
375 | |||
376 | phy_check_media(port, 0); | ||
377 | schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL); | ||
378 | } | ||
379 | |||
380 | |||
381 | static inline void debug_pkt(struct net_device *dev, const char *func, | ||
382 | u8 *data, int len) | ||
383 | { | ||
384 | #if DEBUG_PKT_BYTES | ||
385 | int i; | ||
386 | |||
387 | printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len); | ||
388 | for (i = 0; i < len; i++) { | ||
389 | if (i >= DEBUG_PKT_BYTES) | ||
390 | break; | ||
391 | printk("%s%02X", | ||
392 | ((i == 6) || (i == 12) || (i >= 14)) ? " " : "", | ||
393 | data[i]); | ||
394 | } | ||
395 | printk("\n"); | ||
396 | #endif | ||
397 | } | ||
398 | |||
399 | |||
400 | static inline void debug_desc(u32 phys, struct desc *desc) | ||
401 | { | ||
402 | #if DEBUG_DESC | ||
403 | printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X" | ||
404 | " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n", | ||
405 | phys, desc->next, desc->buf_len, desc->pkt_len, | ||
406 | desc->data, desc->dest_id, desc->src_id, desc->flags, | ||
407 | desc->qos, desc->padlen, desc->vlan_tci, | ||
408 | desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2, | ||
409 | desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5, | ||
410 | desc->src_mac_0, desc->src_mac_1, desc->src_mac_2, | ||
411 | desc->src_mac_3, desc->src_mac_4, desc->src_mac_5); | ||
412 | #endif | ||
413 | } | ||
414 | |||
415 | static inline void debug_queue(unsigned int queue, int is_get, u32 phys) | ||
416 | { | ||
417 | #if DEBUG_QUEUES | ||
418 | static struct { | ||
419 | int queue; | ||
420 | char *name; | ||
421 | } names[] = { | ||
422 | { TX_QUEUE(0x10), "TX#0 " }, | ||
423 | { TX_QUEUE(0x20), "TX#1 " }, | ||
424 | { TX_QUEUE(0x00), "TX#2 " }, | ||
425 | { RXFREE_QUEUE(0x10), "RX-free#0 " }, | ||
426 | { RXFREE_QUEUE(0x20), "RX-free#1 " }, | ||
427 | { RXFREE_QUEUE(0x00), "RX-free#2 " }, | ||
428 | { TXDONE_QUEUE, "TX-done " }, | ||
429 | }; | ||
430 | int i; | ||
431 | |||
432 | for (i = 0; i < ARRAY_SIZE(names); i++) | ||
433 | if (names[i].queue == queue) | ||
434 | break; | ||
435 | |||
436 | printk(KERN_DEBUG "Queue %i %s%s %X\n", queue, | ||
437 | i < ARRAY_SIZE(names) ? names[i].name : "", | ||
438 | is_get ? "->" : "<-", phys); | ||
439 | #endif | ||
440 | } | ||
441 | |||
442 | static inline u32 queue_get_entry(unsigned int queue) | ||
443 | { | ||
444 | u32 phys = qmgr_get_entry(queue); | ||
445 | debug_queue(queue, 1, phys); | ||
446 | return phys; | ||
447 | } | ||
448 | |||
449 | static inline int queue_get_desc(unsigned int queue, struct port *port, | ||
450 | int is_tx) | ||
451 | { | ||
452 | u32 phys, tab_phys, n_desc; | ||
453 | struct desc *tab; | ||
454 | |||
455 | if (!(phys = queue_get_entry(queue))) | ||
456 | return -1; | ||
457 | |||
458 | phys &= ~0x1F; /* mask out non-address bits */ | ||
459 | tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0); | ||
460 | tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0); | ||
461 | n_desc = (phys - tab_phys) / sizeof(struct desc); | ||
462 | BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS)); | ||
463 | debug_desc(phys, &tab[n_desc]); | ||
464 | BUG_ON(tab[n_desc].next); | ||
465 | return n_desc; | ||
466 | } | ||
467 | |||
468 | static inline void queue_put_desc(unsigned int queue, u32 phys, | ||
469 | struct desc *desc) | ||
470 | { | ||
471 | debug_queue(queue, 0, phys); | ||
472 | debug_desc(phys, desc); | ||
473 | BUG_ON(phys & 0x1F); | ||
474 | qmgr_put_entry(queue, phys); | ||
475 | BUG_ON(qmgr_stat_overflow(queue)); | ||
476 | } | ||
477 | |||
478 | |||
479 | static inline void dma_unmap_tx(struct port *port, struct desc *desc) | ||
480 | { | ||
481 | #ifdef __ARMEB__ | ||
482 | dma_unmap_single(&port->netdev->dev, desc->data, | ||
483 | desc->buf_len, DMA_TO_DEVICE); | ||
484 | #else | ||
485 | dma_unmap_single(&port->netdev->dev, desc->data & ~3, | ||
486 | ALIGN((desc->data & 3) + desc->buf_len, 4), | ||
487 | DMA_TO_DEVICE); | ||
488 | #endif | ||
489 | } | ||
490 | |||
491 | |||
492 | static void eth_rx_irq(void *pdev) | ||
493 | { | ||
494 | struct net_device *dev = pdev; | ||
495 | struct port *port = netdev_priv(dev); | ||
496 | |||
497 | #if DEBUG_RX | ||
498 | printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name); | ||
499 | #endif | ||
500 | qmgr_disable_irq(port->plat->rxq); | ||
501 | netif_rx_schedule(dev, &port->napi); | ||
502 | } | ||
503 | |||
504 | static int eth_poll(struct napi_struct *napi, int budget) | ||
505 | { | ||
506 | struct port *port = container_of(napi, struct port, napi); | ||
507 | struct net_device *dev = port->netdev; | ||
508 | unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id); | ||
509 | int received = 0; | ||
510 | |||
511 | #if DEBUG_RX | ||
512 | printk(KERN_DEBUG "%s: eth_poll\n", dev->name); | ||
513 | #endif | ||
514 | |||
515 | while (received < budget) { | ||
516 | struct sk_buff *skb; | ||
517 | struct desc *desc; | ||
518 | int n; | ||
519 | #ifdef __ARMEB__ | ||
520 | struct sk_buff *temp; | ||
521 | u32 phys; | ||
522 | #endif | ||
523 | |||
524 | if ((n = queue_get_desc(rxq, port, 0)) < 0) { | ||
525 | received = 0; /* No packet received */ | ||
526 | #if DEBUG_RX | ||
527 | printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n", | ||
528 | dev->name); | ||
529 | #endif | ||
530 | netif_rx_complete(dev, napi); | ||
531 | qmgr_enable_irq(rxq); | ||
532 | if (!qmgr_stat_empty(rxq) && | ||
533 | netif_rx_reschedule(dev, napi)) { | ||
534 | #if DEBUG_RX | ||
535 | printk(KERN_DEBUG "%s: eth_poll" | ||
536 | " netif_rx_reschedule successed\n", | ||
537 | dev->name); | ||
538 | #endif | ||
539 | qmgr_disable_irq(rxq); | ||
540 | continue; | ||
541 | } | ||
542 | #if DEBUG_RX | ||
543 | printk(KERN_DEBUG "%s: eth_poll all done\n", | ||
544 | dev->name); | ||
545 | #endif | ||
546 | return 0; /* all work done */ | ||
547 | } | ||
548 | |||
549 | desc = rx_desc_ptr(port, n); | ||
550 | |||
551 | #ifdef __ARMEB__ | ||
552 | if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) { | ||
553 | phys = dma_map_single(&dev->dev, skb->data, | ||
554 | RX_BUFF_SIZE, DMA_FROM_DEVICE); | ||
555 | if (dma_mapping_error(phys)) { | ||
556 | dev_kfree_skb(skb); | ||
557 | skb = NULL; | ||
558 | } | ||
559 | } | ||
560 | #else | ||
561 | skb = netdev_alloc_skb(dev, | ||
562 | ALIGN(NET_IP_ALIGN + desc->pkt_len, 4)); | ||
563 | #endif | ||
564 | |||
565 | if (!skb) { | ||
566 | port->stat.rx_dropped++; | ||
567 | /* put the desc back on RX-ready queue */ | ||
568 | desc->buf_len = MAX_MRU; | ||
569 | desc->pkt_len = 0; | ||
570 | queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); | ||
571 | continue; | ||
572 | } | ||
573 | |||
574 | /* process received frame */ | ||
575 | #ifdef __ARMEB__ | ||
576 | temp = skb; | ||
577 | skb = port->rx_buff_tab[n]; | ||
578 | dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN, | ||
579 | RX_BUFF_SIZE, DMA_FROM_DEVICE); | ||
580 | #else | ||
581 | dma_sync_single(&dev->dev, desc->data - NET_IP_ALIGN, | ||
582 | RX_BUFF_SIZE, DMA_FROM_DEVICE); | ||
583 | memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n], | ||
584 | ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4); | ||
585 | #endif | ||
586 | skb_reserve(skb, NET_IP_ALIGN); | ||
587 | skb_put(skb, desc->pkt_len); | ||
588 | |||
589 | debug_pkt(dev, "eth_poll", skb->data, skb->len); | ||
590 | |||
591 | skb->protocol = eth_type_trans(skb, dev); | ||
592 | dev->last_rx = jiffies; | ||
593 | port->stat.rx_packets++; | ||
594 | port->stat.rx_bytes += skb->len; | ||
595 | netif_receive_skb(skb); | ||
596 | |||
597 | /* put the new buffer on RX-free queue */ | ||
598 | #ifdef __ARMEB__ | ||
599 | port->rx_buff_tab[n] = temp; | ||
600 | desc->data = phys + NET_IP_ALIGN; | ||
601 | #endif | ||
602 | desc->buf_len = MAX_MRU; | ||
603 | desc->pkt_len = 0; | ||
604 | queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); | ||
605 | received++; | ||
606 | } | ||
607 | |||
608 | #if DEBUG_RX | ||
609 | printk(KERN_DEBUG "eth_poll(): end, not all work done\n"); | ||
610 | #endif | ||
611 | return received; /* not all work done */ | ||
612 | } | ||
613 | |||
614 | |||
615 | static void eth_txdone_irq(void *unused) | ||
616 | { | ||
617 | u32 phys; | ||
618 | |||
619 | #if DEBUG_TX | ||
620 | printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n"); | ||
621 | #endif | ||
622 | while ((phys = queue_get_entry(TXDONE_QUEUE)) != 0) { | ||
623 | u32 npe_id, n_desc; | ||
624 | struct port *port; | ||
625 | struct desc *desc; | ||
626 | int start; | ||
627 | |||
628 | npe_id = phys & 3; | ||
629 | BUG_ON(npe_id >= MAX_NPES); | ||
630 | port = npe_port_tab[npe_id]; | ||
631 | BUG_ON(!port); | ||
632 | phys &= ~0x1F; /* mask out non-address bits */ | ||
633 | n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc); | ||
634 | BUG_ON(n_desc >= TX_DESCS); | ||
635 | desc = tx_desc_ptr(port, n_desc); | ||
636 | debug_desc(phys, desc); | ||
637 | |||
638 | if (port->tx_buff_tab[n_desc]) { /* not the draining packet */ | ||
639 | port->stat.tx_packets++; | ||
640 | port->stat.tx_bytes += desc->pkt_len; | ||
641 | |||
642 | dma_unmap_tx(port, desc); | ||
643 | #if DEBUG_TX | ||
644 | printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n", | ||
645 | port->netdev->name, port->tx_buff_tab[n_desc]); | ||
646 | #endif | ||
647 | free_buffer_irq(port->tx_buff_tab[n_desc]); | ||
648 | port->tx_buff_tab[n_desc] = NULL; | ||
649 | } | ||
650 | |||
651 | start = qmgr_stat_empty(port->plat->txreadyq); | ||
652 | queue_put_desc(port->plat->txreadyq, phys, desc); | ||
653 | if (start) { | ||
654 | #if DEBUG_TX | ||
655 | printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n", | ||
656 | port->netdev->name); | ||
657 | #endif | ||
658 | netif_wake_queue(port->netdev); | ||
659 | } | ||
660 | } | ||
661 | } | ||
662 | |||
663 | static int eth_xmit(struct sk_buff *skb, struct net_device *dev) | ||
664 | { | ||
665 | struct port *port = netdev_priv(dev); | ||
666 | unsigned int txreadyq = port->plat->txreadyq; | ||
667 | int len, offset, bytes, n; | ||
668 | void *mem; | ||
669 | u32 phys; | ||
670 | struct desc *desc; | ||
671 | |||
672 | #if DEBUG_TX | ||
673 | printk(KERN_DEBUG "%s: eth_xmit\n", dev->name); | ||
674 | #endif | ||
675 | |||
676 | if (unlikely(skb->len > MAX_MRU)) { | ||
677 | dev_kfree_skb(skb); | ||
678 | port->stat.tx_errors++; | ||
679 | return NETDEV_TX_OK; | ||
680 | } | ||
681 | |||
682 | debug_pkt(dev, "eth_xmit", skb->data, skb->len); | ||
683 | |||
684 | len = skb->len; | ||
685 | #ifdef __ARMEB__ | ||
686 | offset = 0; /* no need to keep alignment */ | ||
687 | bytes = len; | ||
688 | mem = skb->data; | ||
689 | #else | ||
690 | offset = (int)skb->data & 3; /* keep 32-bit alignment */ | ||
691 | bytes = ALIGN(offset + len, 4); | ||
692 | if (!(mem = kmalloc(bytes, GFP_ATOMIC))) { | ||
693 | dev_kfree_skb(skb); | ||
694 | port->stat.tx_dropped++; | ||
695 | return NETDEV_TX_OK; | ||
696 | } | ||
697 | memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4); | ||
698 | dev_kfree_skb(skb); | ||
699 | #endif | ||
700 | |||
701 | phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE); | ||
702 | if (dma_mapping_error(phys)) { | ||
703 | #ifdef __ARMEB__ | ||
704 | dev_kfree_skb(skb); | ||
705 | #else | ||
706 | kfree(mem); | ||
707 | #endif | ||
708 | port->stat.tx_dropped++; | ||
709 | return NETDEV_TX_OK; | ||
710 | } | ||
711 | |||
712 | n = queue_get_desc(txreadyq, port, 1); | ||
713 | BUG_ON(n < 0); | ||
714 | desc = tx_desc_ptr(port, n); | ||
715 | |||
716 | #ifdef __ARMEB__ | ||
717 | port->tx_buff_tab[n] = skb; | ||
718 | #else | ||
719 | port->tx_buff_tab[n] = mem; | ||
720 | #endif | ||
721 | desc->data = phys + offset; | ||
722 | desc->buf_len = desc->pkt_len = len; | ||
723 | |||
724 | /* NPE firmware pads short frames with zeros internally */ | ||
725 | wmb(); | ||
726 | queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc); | ||
727 | dev->trans_start = jiffies; | ||
728 | |||
729 | if (qmgr_stat_empty(txreadyq)) { | ||
730 | #if DEBUG_TX | ||
731 | printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name); | ||
732 | #endif | ||
733 | netif_stop_queue(dev); | ||
734 | /* we could miss TX ready interrupt */ | ||
735 | if (!qmgr_stat_empty(txreadyq)) { | ||
736 | #if DEBUG_TX | ||
737 | printk(KERN_DEBUG "%s: eth_xmit ready again\n", | ||
738 | dev->name); | ||
739 | #endif | ||
740 | netif_wake_queue(dev); | ||
741 | } | ||
742 | } | ||
743 | |||
744 | #if DEBUG_TX | ||
745 | printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name); | ||
746 | #endif | ||
747 | return NETDEV_TX_OK; | ||
748 | } | ||
749 | |||
750 | |||
751 | static struct net_device_stats *eth_stats(struct net_device *dev) | ||
752 | { | ||
753 | struct port *port = netdev_priv(dev); | ||
754 | return &port->stat; | ||
755 | } | ||
756 | |||
757 | static void eth_set_mcast_list(struct net_device *dev) | ||
758 | { | ||
759 | struct port *port = netdev_priv(dev); | ||
760 | struct dev_mc_list *mclist = dev->mc_list; | ||
761 | u8 diffs[ETH_ALEN], *addr; | ||
762 | int cnt = dev->mc_count, i; | ||
763 | |||
764 | if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) { | ||
765 | __raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN, | ||
766 | &port->regs->rx_control[0]); | ||
767 | return; | ||
768 | } | ||
769 | |||
770 | memset(diffs, 0, ETH_ALEN); | ||
771 | addr = mclist->dmi_addr; /* first MAC address */ | ||
772 | |||
773 | while (--cnt && (mclist = mclist->next)) | ||
774 | for (i = 0; i < ETH_ALEN; i++) | ||
775 | diffs[i] |= addr[i] ^ mclist->dmi_addr[i]; | ||
776 | |||
777 | for (i = 0; i < ETH_ALEN; i++) { | ||
778 | __raw_writel(addr[i], &port->regs->mcast_addr[i]); | ||
779 | __raw_writel(~diffs[i], &port->regs->mcast_mask[i]); | ||
780 | } | ||
781 | |||
782 | __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN, | ||
783 | &port->regs->rx_control[0]); | ||
784 | } | ||
785 | |||
786 | |||
787 | static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd) | ||
788 | { | ||
789 | struct port *port = netdev_priv(dev); | ||
790 | unsigned int duplex_chg; | ||
791 | int err; | ||
792 | |||
793 | if (!netif_running(dev)) | ||
794 | return -EINVAL; | ||
795 | err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg); | ||
796 | if (duplex_chg) | ||
797 | eth_set_duplex(port); | ||
798 | return err; | ||
799 | } | ||
800 | |||
801 | |||
802 | static int request_queues(struct port *port) | ||
803 | { | ||
804 | int err; | ||
805 | |||
806 | err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0); | ||
807 | if (err) | ||
808 | return err; | ||
809 | |||
810 | err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0); | ||
811 | if (err) | ||
812 | goto rel_rxfree; | ||
813 | |||
814 | err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0); | ||
815 | if (err) | ||
816 | goto rel_rx; | ||
817 | |||
818 | err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0); | ||
819 | if (err) | ||
820 | goto rel_tx; | ||
821 | |||
822 | /* TX-done queue handles skbs sent out by the NPEs */ | ||
823 | if (!ports_open) { | ||
824 | err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0); | ||
825 | if (err) | ||
826 | goto rel_txready; | ||
827 | } | ||
828 | return 0; | ||
829 | |||
830 | rel_txready: | ||
831 | qmgr_release_queue(port->plat->txreadyq); | ||
832 | rel_tx: | ||
833 | qmgr_release_queue(TX_QUEUE(port->id)); | ||
834 | rel_rx: | ||
835 | qmgr_release_queue(port->plat->rxq); | ||
836 | rel_rxfree: | ||
837 | qmgr_release_queue(RXFREE_QUEUE(port->id)); | ||
838 | printk(KERN_DEBUG "%s: unable to request hardware queues\n", | ||
839 | port->netdev->name); | ||
840 | return err; | ||
841 | } | ||
842 | |||
843 | static void release_queues(struct port *port) | ||
844 | { | ||
845 | qmgr_release_queue(RXFREE_QUEUE(port->id)); | ||
846 | qmgr_release_queue(port->plat->rxq); | ||
847 | qmgr_release_queue(TX_QUEUE(port->id)); | ||
848 | qmgr_release_queue(port->plat->txreadyq); | ||
849 | |||
850 | if (!ports_open) | ||
851 | qmgr_release_queue(TXDONE_QUEUE); | ||
852 | } | ||
853 | |||
854 | static int init_queues(struct port *port) | ||
855 | { | ||
856 | int i; | ||
857 | |||
858 | if (!ports_open) | ||
859 | if (!(dma_pool = dma_pool_create(DRV_NAME, NULL, | ||
860 | POOL_ALLOC_SIZE, 32, 0))) | ||
861 | return -ENOMEM; | ||
862 | |||
863 | if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL, | ||
864 | &port->desc_tab_phys))) | ||
865 | return -ENOMEM; | ||
866 | memset(port->desc_tab, 0, POOL_ALLOC_SIZE); | ||
867 | memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */ | ||
868 | memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab)); | ||
869 | |||
870 | /* Setup RX buffers */ | ||
871 | for (i = 0; i < RX_DESCS; i++) { | ||
872 | struct desc *desc = rx_desc_ptr(port, i); | ||
873 | buffer_t *buff; /* skb or kmalloc()ated memory */ | ||
874 | void *data; | ||
875 | #ifdef __ARMEB__ | ||
876 | if (!(buff = netdev_alloc_skb(port->netdev, RX_BUFF_SIZE))) | ||
877 | return -ENOMEM; | ||
878 | data = buff->data; | ||
879 | #else | ||
880 | if (!(buff = kmalloc(RX_BUFF_SIZE, GFP_KERNEL))) | ||
881 | return -ENOMEM; | ||
882 | data = buff; | ||
883 | #endif | ||
884 | desc->buf_len = MAX_MRU; | ||
885 | desc->data = dma_map_single(&port->netdev->dev, data, | ||
886 | RX_BUFF_SIZE, DMA_FROM_DEVICE); | ||
887 | if (dma_mapping_error(desc->data)) { | ||
888 | free_buffer(buff); | ||
889 | return -EIO; | ||
890 | } | ||
891 | desc->data += NET_IP_ALIGN; | ||
892 | port->rx_buff_tab[i] = buff; | ||
893 | } | ||
894 | |||
895 | return 0; | ||
896 | } | ||
897 | |||
898 | static void destroy_queues(struct port *port) | ||
899 | { | ||
900 | int i; | ||
901 | |||
902 | if (port->desc_tab) { | ||
903 | for (i = 0; i < RX_DESCS; i++) { | ||
904 | struct desc *desc = rx_desc_ptr(port, i); | ||
905 | buffer_t *buff = port->rx_buff_tab[i]; | ||
906 | if (buff) { | ||
907 | dma_unmap_single(&port->netdev->dev, | ||
908 | desc->data - NET_IP_ALIGN, | ||
909 | RX_BUFF_SIZE, DMA_FROM_DEVICE); | ||
910 | free_buffer(buff); | ||
911 | } | ||
912 | } | ||
913 | for (i = 0; i < TX_DESCS; i++) { | ||
914 | struct desc *desc = tx_desc_ptr(port, i); | ||
915 | buffer_t *buff = port->tx_buff_tab[i]; | ||
916 | if (buff) { | ||
917 | dma_unmap_tx(port, desc); | ||
918 | free_buffer(buff); | ||
919 | } | ||
920 | } | ||
921 | dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys); | ||
922 | port->desc_tab = NULL; | ||
923 | } | ||
924 | |||
925 | if (!ports_open && dma_pool) { | ||
926 | dma_pool_destroy(dma_pool); | ||
927 | dma_pool = NULL; | ||
928 | } | ||
929 | } | ||
930 | |||
931 | static int eth_open(struct net_device *dev) | ||
932 | { | ||
933 | struct port *port = netdev_priv(dev); | ||
934 | struct npe *npe = port->npe; | ||
935 | struct msg msg; | ||
936 | int i, err; | ||
937 | |||
938 | if (!npe_running(npe)) { | ||
939 | err = npe_load_firmware(npe, npe_name(npe), &dev->dev); | ||
940 | if (err) | ||
941 | return err; | ||
942 | |||
943 | if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) { | ||
944 | printk(KERN_ERR "%s: %s not responding\n", dev->name, | ||
945 | npe_name(npe)); | ||
946 | return -EIO; | ||
947 | } | ||
948 | } | ||
949 | |||
950 | mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr); | ||
951 | |||
952 | memset(&msg, 0, sizeof(msg)); | ||
953 | msg.cmd = NPE_VLAN_SETRXQOSENTRY; | ||
954 | msg.eth_id = port->id; | ||
955 | msg.byte5 = port->plat->rxq | 0x80; | ||
956 | msg.byte7 = port->plat->rxq << 4; | ||
957 | for (i = 0; i < 8; i++) { | ||
958 | msg.byte3 = i; | ||
959 | if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ")) | ||
960 | return -EIO; | ||
961 | } | ||
962 | |||
963 | msg.cmd = NPE_EDB_SETPORTADDRESS; | ||
964 | msg.eth_id = PHYSICAL_ID(port->id); | ||
965 | msg.byte2 = dev->dev_addr[0]; | ||
966 | msg.byte3 = dev->dev_addr[1]; | ||
967 | msg.byte4 = dev->dev_addr[2]; | ||
968 | msg.byte5 = dev->dev_addr[3]; | ||
969 | msg.byte6 = dev->dev_addr[4]; | ||
970 | msg.byte7 = dev->dev_addr[5]; | ||
971 | if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC")) | ||
972 | return -EIO; | ||
973 | |||
974 | memset(&msg, 0, sizeof(msg)); | ||
975 | msg.cmd = NPE_FW_SETFIREWALLMODE; | ||
976 | msg.eth_id = port->id; | ||
977 | if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE")) | ||
978 | return -EIO; | ||
979 | |||
980 | if ((err = request_queues(port)) != 0) | ||
981 | return err; | ||
982 | |||
983 | if ((err = init_queues(port)) != 0) { | ||
984 | destroy_queues(port); | ||
985 | release_queues(port); | ||
986 | return err; | ||
987 | } | ||
988 | |||
989 | for (i = 0; i < ETH_ALEN; i++) | ||
990 | __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]); | ||
991 | __raw_writel(0x08, &port->regs->random_seed); | ||
992 | __raw_writel(0x12, &port->regs->partial_empty_threshold); | ||
993 | __raw_writel(0x30, &port->regs->partial_full_threshold); | ||
994 | __raw_writel(0x08, &port->regs->tx_start_bytes); | ||
995 | __raw_writel(0x15, &port->regs->tx_deferral); | ||
996 | __raw_writel(0x08, &port->regs->tx_2part_deferral[0]); | ||
997 | __raw_writel(0x07, &port->regs->tx_2part_deferral[1]); | ||
998 | __raw_writel(0x80, &port->regs->slot_time); | ||
999 | __raw_writel(0x01, &port->regs->int_clock_threshold); | ||
1000 | |||
1001 | /* Populate queues with buffers, no failure after this point */ | ||
1002 | for (i = 0; i < TX_DESCS; i++) | ||
1003 | queue_put_desc(port->plat->txreadyq, | ||
1004 | tx_desc_phys(port, i), tx_desc_ptr(port, i)); | ||
1005 | |||
1006 | for (i = 0; i < RX_DESCS; i++) | ||
1007 | queue_put_desc(RXFREE_QUEUE(port->id), | ||
1008 | rx_desc_phys(port, i), rx_desc_ptr(port, i)); | ||
1009 | |||
1010 | __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]); | ||
1011 | __raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]); | ||
1012 | __raw_writel(0, &port->regs->rx_control[1]); | ||
1013 | __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]); | ||
1014 | |||
1015 | napi_enable(&port->napi); | ||
1016 | phy_check_media(port, 1); | ||
1017 | eth_set_mcast_list(dev); | ||
1018 | netif_start_queue(dev); | ||
1019 | schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL); | ||
1020 | |||
1021 | qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY, | ||
1022 | eth_rx_irq, dev); | ||
1023 | if (!ports_open) { | ||
1024 | qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY, | ||
1025 | eth_txdone_irq, NULL); | ||
1026 | qmgr_enable_irq(TXDONE_QUEUE); | ||
1027 | } | ||
1028 | ports_open++; | ||
1029 | /* we may already have RX data, enables IRQ */ | ||
1030 | netif_rx_schedule(dev, &port->napi); | ||
1031 | return 0; | ||
1032 | } | ||
1033 | |||
1034 | static int eth_close(struct net_device *dev) | ||
1035 | { | ||
1036 | struct port *port = netdev_priv(dev); | ||
1037 | struct msg msg; | ||
1038 | int buffs = RX_DESCS; /* allocated RX buffers */ | ||
1039 | int i; | ||
1040 | |||
1041 | ports_open--; | ||
1042 | qmgr_disable_irq(port->plat->rxq); | ||
1043 | napi_disable(&port->napi); | ||
1044 | netif_stop_queue(dev); | ||
1045 | |||
1046 | while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0) | ||
1047 | buffs--; | ||
1048 | |||
1049 | memset(&msg, 0, sizeof(msg)); | ||
1050 | msg.cmd = NPE_SETLOOPBACK_MODE; | ||
1051 | msg.eth_id = port->id; | ||
1052 | msg.byte3 = 1; | ||
1053 | if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK")) | ||
1054 | printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name); | ||
1055 | |||
1056 | i = 0; | ||
1057 | do { /* drain RX buffers */ | ||
1058 | while (queue_get_desc(port->plat->rxq, port, 0) >= 0) | ||
1059 | buffs--; | ||
1060 | if (!buffs) | ||
1061 | break; | ||
1062 | if (qmgr_stat_empty(TX_QUEUE(port->id))) { | ||
1063 | /* we have to inject some packet */ | ||
1064 | struct desc *desc; | ||
1065 | u32 phys; | ||
1066 | int n = queue_get_desc(port->plat->txreadyq, port, 1); | ||
1067 | BUG_ON(n < 0); | ||
1068 | desc = tx_desc_ptr(port, n); | ||
1069 | phys = tx_desc_phys(port, n); | ||
1070 | desc->buf_len = desc->pkt_len = 1; | ||
1071 | wmb(); | ||
1072 | queue_put_desc(TX_QUEUE(port->id), phys, desc); | ||
1073 | } | ||
1074 | udelay(1); | ||
1075 | } while (++i < MAX_CLOSE_WAIT); | ||
1076 | |||
1077 | if (buffs) | ||
1078 | printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)" | ||
1079 | " left in NPE\n", dev->name, buffs); | ||
1080 | #if DEBUG_CLOSE | ||
1081 | if (!buffs) | ||
1082 | printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i); | ||
1083 | #endif | ||
1084 | |||
1085 | buffs = TX_DESCS; | ||
1086 | while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0) | ||
1087 | buffs--; /* cancel TX */ | ||
1088 | |||
1089 | i = 0; | ||
1090 | do { | ||
1091 | while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0) | ||
1092 | buffs--; | ||
1093 | if (!buffs) | ||
1094 | break; | ||
1095 | } while (++i < MAX_CLOSE_WAIT); | ||
1096 | |||
1097 | if (buffs) | ||
1098 | printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) " | ||
1099 | "left in NPE\n", dev->name, buffs); | ||
1100 | #if DEBUG_CLOSE | ||
1101 | if (!buffs) | ||
1102 | printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i); | ||
1103 | #endif | ||
1104 | |||
1105 | msg.byte3 = 0; | ||
1106 | if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK")) | ||
1107 | printk(KERN_CRIT "%s: unable to disable loopback\n", | ||
1108 | dev->name); | ||
1109 | |||
1110 | port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) & | ||
1111 | ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */ | ||
1112 | mdio_write(dev, port->plat->phy, MII_BMCR, | ||
1113 | port->mii_bmcr | BMCR_PDOWN); | ||
1114 | |||
1115 | if (!ports_open) | ||
1116 | qmgr_disable_irq(TXDONE_QUEUE); | ||
1117 | cancel_rearming_delayed_work(&port->mdio_thread); | ||
1118 | destroy_queues(port); | ||
1119 | release_queues(port); | ||
1120 | return 0; | ||
1121 | } | ||
1122 | |||
1123 | static int __devinit eth_init_one(struct platform_device *pdev) | ||
1124 | { | ||
1125 | struct port *port; | ||
1126 | struct net_device *dev; | ||
1127 | struct eth_plat_info *plat = pdev->dev.platform_data; | ||
1128 | u32 regs_phys; | ||
1129 | int err; | ||
1130 | |||
1131 | if (!(dev = alloc_etherdev(sizeof(struct port)))) | ||
1132 | return -ENOMEM; | ||
1133 | |||
1134 | SET_NETDEV_DEV(dev, &pdev->dev); | ||
1135 | port = netdev_priv(dev); | ||
1136 | port->netdev = dev; | ||
1137 | port->id = pdev->id; | ||
1138 | |||
1139 | switch (port->id) { | ||
1140 | case IXP4XX_ETH_NPEA: | ||
1141 | port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT; | ||
1142 | regs_phys = IXP4XX_EthA_BASE_PHYS; | ||
1143 | break; | ||
1144 | case IXP4XX_ETH_NPEB: | ||
1145 | port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; | ||
1146 | regs_phys = IXP4XX_EthB_BASE_PHYS; | ||
1147 | break; | ||
1148 | case IXP4XX_ETH_NPEC: | ||
1149 | port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT; | ||
1150 | regs_phys = IXP4XX_EthC_BASE_PHYS; | ||
1151 | break; | ||
1152 | default: | ||
1153 | err = -ENOSYS; | ||
1154 | goto err_free; | ||
1155 | } | ||
1156 | |||
1157 | dev->open = eth_open; | ||
1158 | dev->hard_start_xmit = eth_xmit; | ||
1159 | dev->stop = eth_close; | ||
1160 | dev->get_stats = eth_stats; | ||
1161 | dev->do_ioctl = eth_ioctl; | ||
1162 | dev->set_multicast_list = eth_set_mcast_list; | ||
1163 | dev->tx_queue_len = 100; | ||
1164 | |||
1165 | netif_napi_add(dev, &port->napi, eth_poll, NAPI_WEIGHT); | ||
1166 | |||
1167 | if (!(port->npe = npe_request(NPE_ID(port->id)))) { | ||
1168 | err = -EIO; | ||
1169 | goto err_free; | ||
1170 | } | ||
1171 | |||
1172 | if (register_netdev(dev)) { | ||
1173 | err = -EIO; | ||
1174 | goto err_npe_rel; | ||
1175 | } | ||
1176 | |||
1177 | port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name); | ||
1178 | if (!port->mem_res) { | ||
1179 | err = -EBUSY; | ||
1180 | goto err_unreg; | ||
1181 | } | ||
1182 | |||
1183 | port->plat = plat; | ||
1184 | npe_port_tab[NPE_ID(port->id)] = port; | ||
1185 | memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN); | ||
1186 | |||
1187 | platform_set_drvdata(pdev, dev); | ||
1188 | |||
1189 | __raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET, | ||
1190 | &port->regs->core_control); | ||
1191 | udelay(50); | ||
1192 | __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control); | ||
1193 | udelay(50); | ||
1194 | |||
1195 | port->mii.dev = dev; | ||
1196 | port->mii.mdio_read = mdio_read; | ||
1197 | port->mii.mdio_write = mdio_write; | ||
1198 | port->mii.phy_id = plat->phy; | ||
1199 | port->mii.phy_id_mask = 0x1F; | ||
1200 | port->mii.reg_num_mask = 0x1F; | ||
1201 | |||
1202 | printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy, | ||
1203 | npe_name(port->npe)); | ||
1204 | |||
1205 | phy_reset(dev, plat->phy); | ||
1206 | port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) & | ||
1207 | ~(BMCR_RESET | BMCR_PDOWN); | ||
1208 | mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN); | ||
1209 | |||
1210 | INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread); | ||
1211 | return 0; | ||
1212 | |||
1213 | err_unreg: | ||
1214 | unregister_netdev(dev); | ||
1215 | err_npe_rel: | ||
1216 | npe_release(port->npe); | ||
1217 | err_free: | ||
1218 | free_netdev(dev); | ||
1219 | return err; | ||
1220 | } | ||
1221 | |||
1222 | static int __devexit eth_remove_one(struct platform_device *pdev) | ||
1223 | { | ||
1224 | struct net_device *dev = platform_get_drvdata(pdev); | ||
1225 | struct port *port = netdev_priv(dev); | ||
1226 | |||
1227 | unregister_netdev(dev); | ||
1228 | npe_port_tab[NPE_ID(port->id)] = NULL; | ||
1229 | platform_set_drvdata(pdev, NULL); | ||
1230 | npe_release(port->npe); | ||
1231 | release_resource(port->mem_res); | ||
1232 | free_netdev(dev); | ||
1233 | return 0; | ||
1234 | } | ||
1235 | |||
1236 | static struct platform_driver drv = { | ||
1237 | .driver.name = DRV_NAME, | ||
1238 | .probe = eth_init_one, | ||
1239 | .remove = eth_remove_one, | ||
1240 | }; | ||
1241 | |||
1242 | static int __init eth_init_module(void) | ||
1243 | { | ||
1244 | if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) | ||
1245 | return -ENOSYS; | ||
1246 | |||
1247 | /* All MII PHY accesses use NPE-B Ethernet registers */ | ||
1248 | spin_lock_init(&mdio_lock); | ||
1249 | mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; | ||
1250 | __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control); | ||
1251 | |||
1252 | return platform_driver_register(&drv); | ||
1253 | } | ||
1254 | |||
1255 | static void __exit eth_cleanup_module(void) | ||
1256 | { | ||
1257 | platform_driver_unregister(&drv); | ||
1258 | } | ||
1259 | |||
1260 | MODULE_AUTHOR("Krzysztof Halasa"); | ||
1261 | MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver"); | ||
1262 | MODULE_LICENSE("GPL v2"); | ||
1263 | MODULE_ALIAS("platform:ixp4xx_eth"); | ||
1264 | module_init(eth_init_module); | ||
1265 | module_exit(eth_cleanup_module); | ||