V4L/DVB (4067): Fixed cx25840 to work with PAL/M

Sub-carrier frequency for PAL/M is slicely different than NTSC/M.
Without this patch, colors don't work on PAL/M.
Setting method also improved to allow other video standards to be included.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

3 files changed, 126 insertions, 55 deletions

diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 6d7207e67d6f..cb9e8625708d 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -46,7 +46,7 @@ MODULE_LICENSE("GPL");
 static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
 
 
-static int cx25840_debug;
+int cx25840_debug;
 
 module_param_named(debug,cx25840_debug, int, 0644);
 
@@ -251,17 +251,7 @@ static void input_change(struct i2c_client *client)
         cx25840_and_or(client, 0x401, ~0x60, 0);
         cx25840_and_or(client, 0x401, ~0x60, 0x60);
 
-        /* Note: perhaps V4L2_STD_PAL_M should be handled as V4L2_STD_NTSC
-           instead of V4L2_STD_PAL. Someone needs to test this. */
-        if (std & V4L2_STD_PAL) {
-                /* Follow tuner change procedure for PAL */
-                cx25840_write(client, 0x808, 0xff);
-                cx25840_write(client, 0x80b, 0x10);
-        } else if (std & V4L2_STD_SECAM) {
-                /* Select autodetect for SECAM */
-                cx25840_write(client, 0x808, 0xff);
-                cx25840_write(client, 0x80b, 0x10);
-        } else if (std & V4L2_STD_NTSC) {
+        if (std & V4L2_STD_525_60) {
                 /* Certain Hauppauge PVR150 models have a hardware bug
                    that causes audio to drop out. For these models the
                    audio standard must be set explicitly.
@@ -280,6 +270,14 @@ static void input_change(struct i2c_client *client)
                         cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6);
                 }
                 cx25840_write(client, 0x80b, 0x00);
+        } else if (std & V4L2_STD_PAL) {
+                /* Follow tuner change procedure for PAL */
+                cx25840_write(client, 0x808, 0xff);
+                cx25840_write(client, 0x80b, 0x10);
+        } else if (std & V4L2_STD_SECAM) {
+                /* Select autodetect for SECAM */
+                cx25840_write(client, 0x808, 0xff);
+                cx25840_write(client, 0x80b, 0x10);
         }
 
         if (cx25840_read(client, 0x803) & 0x10) {
@@ -387,6 +385,8 @@ static int set_v4lstd(struct i2c_client *client, v4l2_std_id std)
                 }
         }
 
+        v4l_dbg(1, cx25840_debug, client, "changing video std to fmt %i\n",fmt);
+
         /* Follow step 9 of section 3.16 in the cx25840 datasheet.
            Without this PAL may display a vertical ghosting effect.
            This happens for example with the Yuan MPC622. */
diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
index b1321920dfe7..28049064dd7d 100644
--- a/drivers/media/video/cx25840/cx25840-core.h
+++ b/drivers/media/video/cx25840/cx25840-core.h
@@ -24,6 +24,8 @@
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 
+extern int cx25840_debug;
+
 /* ENABLE_PVR150_WORKAROUND activates a workaround for a hardware bug that is
    present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
    certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
diff --git a/drivers/media/video/cx25840/cx25840-vbi.c b/drivers/media/video/cx25840/cx25840-vbi.c
index c124974c55b1..6cc8bf215e85 100644
--- a/drivers/media/video/cx25840/cx25840-vbi.c
+++ b/drivers/media/video/cx25840/cx25840-vbi.c
@@ -86,61 +86,130 @@ void cx25840_vbi_setup(struct i2c_client *client)
 {
         struct cx25840_state *state = i2c_get_clientdata(client);
         v4l2_std_id std = cx25840_get_v4lstd(client);
+        int hblank,hactive,burst,vblank,vactive,sc,vblank656,src_decimation;
+        int luma_lpf,uv_lpf, comb;
+        u32 pll_int,pll_frac,pll_post;
 
+        /* datasheet startup, step 8d */
         if (std & ~V4L2_STD_NTSC) {
-                /* datasheet startup, step 8d */
                 cx25840_write(client, 0x49f, 0x11);
+        } else {
+                cx25840_write(client, 0x49f, 0x14);
+        }
 
-                cx25840_write(client, 0x470, 0x84);
-                cx25840_write(client, 0x471, 0x00);
-                cx25840_write(client, 0x472, 0x2d);
-                cx25840_write(client, 0x473, 0x5d);
-
-                cx25840_write(client, 0x474, 0x24);
-                cx25840_write(client, 0x475, 0x40);
-                cx25840_write(client, 0x476, 0x24);
-                cx25840_write(client, 0x477, 0x28);
-
-                cx25840_write(client, 0x478, 0x1f);
-                cx25840_write(client, 0x479, 0x02);
+        if (std & V4L2_STD_625_50) {
+                hblank=0x084;
+                hactive=0x2d0;
+                burst=0x5d;
+                vblank=0x024;
+                vactive=0x244;
+                vblank656=0x28;
+                src_decimation=0x21f;
 
+                luma_lpf=2;
                 if (std & V4L2_STD_SECAM) {
-                        cx25840_write(client, 0x47a, 0x80);
-                        cx25840_write(client, 0x47b, 0x00);
-                        cx25840_write(client, 0x47c, 0x5f);
-                        cx25840_write(client, 0x47d, 0x42);
+                        uv_lpf=0;
+                        comb=0;
+                        sc=0x0a425f;
                 } else {
-                        cx25840_write(client, 0x47a, 0x90);
-                        cx25840_write(client, 0x47b, 0x20);
-                        cx25840_write(client, 0x47c, 0x63);
-                        cx25840_write(client, 0x47d, 0x82);
+                        uv_lpf=1;
+                        comb=0x20;
+                        sc=0x0a8263;
                 }
-
-                cx25840_write(client, 0x47e, 0x0a);
-                cx25840_write(client, 0x47f, 0x01);
-                state->vbi_line_offset = 5;
         } else {
-                /* datasheet startup, step 8d */
-                cx25840_write(client, 0x49f, 0x14);
+                hactive=720;
+                hblank=122;
+                vactive=487;
+                luma_lpf=1;
+                uv_lpf=1;
+
+                src_decimation=0x21f;
+                if (std == V4L2_STD_PAL_M) {
+                        vblank=20;
+                        vblank656=24;
+                        burst=0x61;
+                        comb=0x20;
+
+                        sc=555452;
+                } else {
+                        vblank=26;
+                        vblank656=26;
+                        burst=0x5b;
+                        comb=0x66;
+                        sc=556063;
+                }
+        }
+
+        /* DEBUG: Displays configured PLL frequency */
+        pll_int=cx25840_read(client, 0x108);
+        pll_frac=cx25840_read4(client, 0x10c)&0x1ffffff;
+        pll_post=cx25840_read(client, 0x109);
+        v4l_dbg(1, cx25840_debug, client,
+                                "PLL regs = int: %u, frac: %u, post: %u\n",
+                                pll_int,pll_frac,pll_post);
+
+        if (pll_post) {
+                int fin, fsc;
+                int pll= (28636363L*((((u64)pll_int)<<25L)+pll_frac)) >>25L;
+
+                pll/=pll_post;
+                v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
+                                                pll/1000000, pll%1000000);
+                v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
+                                                pll/8000000, (pll/8)%1000000);
+
+                fin=((u64)src_decimation*pll)>>12;
+                v4l_dbg(1, cx25840_debug, client, "ADC Sampling freq = "
+                                                "%d.%06d MHz\n",
+                                                fin/1000000,fin%1000000);
+
+                fsc= (((u64)sc)*pll) >> 24L;
+                v4l_dbg(1, cx25840_debug, client, "Chroma sub-carrier freq = "
+                                                "%d.%06d MHz\n",
+                                                fsc/1000000,fsc%1000000);
+
+                v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
+                        "vblank %i , vactive %i, vblank656 %i, src_dec %i,"
+                        "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x,"
+                        " sc 0x%06x\n",
+                        hblank, hactive, vblank, vactive, vblank656,
+                        src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
+        }
+
+        /* Sets horizontal blanking delay and active lines */
+        cx25840_write(client, 0x470, hblank);
+        cx25840_write(client, 0x471, 0xff&(((hblank>>8)&0x3)|(hactive <<4)));
+        cx25840_write(client, 0x472, hactive>>4);
+
+        /* Sets burst gate delay */
+        cx25840_write(client, 0x473, burst);
 
-                cx25840_write(client, 0x470, 0x7a);
-                cx25840_write(client, 0x471, 0x00);
-                cx25840_write(client, 0x472, 0x2d);
-                cx25840_write(client, 0x473, 0x5b);
+        /* Sets vertical blanking delay and active duration */
+        cx25840_write(client, 0x474, vblank);
+        cx25840_write(client, 0x475, 0xff&(((vblank>>8)&0x3)|(vactive <<4)));
+        cx25840_write(client, 0x476, vactive>>4);
+        cx25840_write(client, 0x477, vblank656);
 
-                cx25840_write(client, 0x474, 0x1a);
-                cx25840_write(client, 0x475, 0x70);
-                cx25840_write(client, 0x476, 0x1e);
-                cx25840_write(client, 0x477, 0x1e);
+        /* Sets src decimation rate */
+        cx25840_write(client, 0x478, 0xff&src_decimation);
+        cx25840_write(client, 0x479, 0xff&(src_decimation>>8));
 
-                cx25840_write(client, 0x478, 0x1f);
-                cx25840_write(client, 0x479, 0x02);
-                cx25840_write(client, 0x47a, 0x50);
-                cx25840_write(client, 0x47b, 0x66);
+        /* Sets Luma and UV Low pass filters */
+        cx25840_write(client, 0x47a, luma_lpf<<6|((uv_lpf<<4)&0x30));
 
-                cx25840_write(client, 0x47c, 0x1f);
-                cx25840_write(client, 0x47d, 0x7c);
-                cx25840_write(client, 0x47e, 0x08);
+        /* Enables comb filters */
+        cx25840_write(client, 0x47b, comb);
+
+        /* Sets SC Step*/
+        cx25840_write(client, 0x47c, sc);
+        cx25840_write(client, 0x47d, 0xff&sc>>8);
+        cx25840_write(client, 0x47e, 0xff&sc>>16);
+
+        /* Sets VBI parameters */
+        if (std & V4L2_STD_625_50) {
+                cx25840_write(client, 0x47f, 0x01);
+                state->vbi_line_offset = 5;
+        } else {
                 cx25840_write(client, 0x47f, 0x00);
                 state->vbi_line_offset = 8;
         }
@@ -186,7 +255,7 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
 
         case VIDIOC_S_FMT:
         {
-                int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_NTSC);
+                int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_525_60);
                 int vbi_offset = is_pal ? 1 : 0;
                 int i, x;
                 u8 lcr[24];