diff options
author | Kristian Høgsberg <krh@redhat.com> | 2006-12-19 19:58:35 -0500 |
---|---|---|
committer | Stefan Richter <stefanr@s5r6.in-berlin.de> | 2007-03-09 16:02:34 -0500 |
commit | ed5689122f4cdb5cb8c6770ad1a2c8561b32d9b3 (patch) | |
tree | e2f45d88370663642bb186d95d075a3b410525fd /drivers | |
parent | 19a15b937b26638933307bb02f7b1801310d6eb2 (diff) |
firewire: Add driver for OHCI firewire host controllers.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/firewire/Kconfig | 11 | ||||
-rw-r--r-- | drivers/firewire/Makefile | 1 | ||||
-rw-r--r-- | drivers/firewire/fw-ohci.c | 1394 | ||||
-rw-r--r-- | drivers/firewire/fw-ohci.h | 152 |
4 files changed, 1558 insertions, 0 deletions
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index bdd6303f1a4e..b3863344617a 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig | |||
@@ -20,4 +20,15 @@ config FW | |||
20 | To compile this driver as a module, say M here: the | 20 | To compile this driver as a module, say M here: the |
21 | module will be called fw-core. | 21 | module will be called fw-core. |
22 | 22 | ||
23 | config FW_OHCI | ||
24 | tristate "Support for OHCI firewire host controllers" | ||
25 | depends on PCI && FW | ||
26 | help | ||
27 | Enable this driver if you have an firewire controller based | ||
28 | on the OHCI specification. For all practical purposes, this | ||
29 | is the only chipset in use, so say Y here. | ||
30 | |||
31 | To compile this driver as a module, say M here: the | ||
32 | module will be called fw-ohci. | ||
33 | |||
23 | endmenu | 34 | endmenu |
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile index da77bc0501e4..add3b983def2 100644 --- a/drivers/firewire/Makefile +++ b/drivers/firewire/Makefile | |||
@@ -6,3 +6,4 @@ fw-core-objs := fw-card.o fw-topology.o fw-transaction.o fw-iso.o \ | |||
6 | fw-device.o fw-device-cdev.o | 6 | fw-device.o fw-device-cdev.o |
7 | 7 | ||
8 | obj-$(CONFIG_FW) += fw-core.o | 8 | obj-$(CONFIG_FW) += fw-core.o |
9 | obj-$(CONFIG_FW_OHCI) += fw-ohci.o | ||
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c new file mode 100644 index 000000000000..5392a2b13540 --- /dev/null +++ b/drivers/firewire/fw-ohci.c | |||
@@ -0,0 +1,1394 @@ | |||
1 | /* -*- c-basic-offset: 8 -*- | ||
2 | * | ||
3 | * fw-ohci.c - Driver for OHCI 1394 boards | ||
4 | * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net> | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License as published by | ||
8 | * the Free Software Foundation; either version 2 of the License, or | ||
9 | * (at your option) any later version. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, | ||
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
14 | * GNU General Public License for more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License | ||
17 | * along with this program; if not, write to the Free Software Foundation, | ||
18 | * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
19 | */ | ||
20 | |||
21 | #include <linux/kernel.h> | ||
22 | #include <linux/module.h> | ||
23 | #include <linux/init.h> | ||
24 | #include <linux/interrupt.h> | ||
25 | #include <linux/pci.h> | ||
26 | #include <linux/delay.h> | ||
27 | #include <linux/poll.h> | ||
28 | #include <asm/uaccess.h> | ||
29 | #include <asm/semaphore.h> | ||
30 | |||
31 | #include "fw-transaction.h" | ||
32 | #include "fw-ohci.h" | ||
33 | |||
34 | #define descriptor_output_more 0 | ||
35 | #define descriptor_output_last (1 << 12) | ||
36 | #define descriptor_input_more (2 << 12) | ||
37 | #define descriptor_input_last (3 << 12) | ||
38 | #define descriptor_status (1 << 11) | ||
39 | #define descriptor_key_immediate (2 << 8) | ||
40 | #define descriptor_ping (1 << 7) | ||
41 | #define descriptor_yy (1 << 6) | ||
42 | #define descriptor_no_irq (0 << 4) | ||
43 | #define descriptor_irq_error (1 << 4) | ||
44 | #define descriptor_irq_always (3 << 4) | ||
45 | #define descriptor_branch_always (3 << 2) | ||
46 | |||
47 | struct descriptor { | ||
48 | __le16 req_count; | ||
49 | __le16 control; | ||
50 | __le32 data_address; | ||
51 | __le32 branch_address; | ||
52 | __le16 res_count; | ||
53 | __le16 transfer_status; | ||
54 | } __attribute__((aligned(16))); | ||
55 | |||
56 | struct ar_context { | ||
57 | struct fw_ohci *ohci; | ||
58 | struct descriptor descriptor; | ||
59 | __le32 buffer[512]; | ||
60 | dma_addr_t descriptor_bus; | ||
61 | dma_addr_t buffer_bus; | ||
62 | |||
63 | u32 command_ptr; | ||
64 | u32 control_set; | ||
65 | u32 control_clear; | ||
66 | |||
67 | struct tasklet_struct tasklet; | ||
68 | }; | ||
69 | |||
70 | struct at_context { | ||
71 | struct fw_ohci *ohci; | ||
72 | dma_addr_t descriptor_bus; | ||
73 | dma_addr_t buffer_bus; | ||
74 | |||
75 | struct list_head list; | ||
76 | |||
77 | struct { | ||
78 | struct descriptor more; | ||
79 | __le32 header[4]; | ||
80 | struct descriptor last; | ||
81 | } d; | ||
82 | |||
83 | u32 command_ptr; | ||
84 | u32 control_set; | ||
85 | u32 control_clear; | ||
86 | |||
87 | struct tasklet_struct tasklet; | ||
88 | }; | ||
89 | |||
90 | #define it_header_sy(v) ((v) << 0) | ||
91 | #define it_header_tcode(v) ((v) << 4) | ||
92 | #define it_header_channel(v) ((v) << 8) | ||
93 | #define it_header_tag(v) ((v) << 14) | ||
94 | #define it_header_speed(v) ((v) << 16) | ||
95 | #define it_header_data_length(v) ((v) << 16) | ||
96 | |||
97 | struct iso_context { | ||
98 | struct fw_iso_context base; | ||
99 | struct tasklet_struct tasklet; | ||
100 | u32 control_set; | ||
101 | u32 control_clear; | ||
102 | u32 command_ptr; | ||
103 | u32 context_match; | ||
104 | |||
105 | struct descriptor *buffer; | ||
106 | dma_addr_t buffer_bus; | ||
107 | struct descriptor *head_descriptor; | ||
108 | struct descriptor *tail_descriptor; | ||
109 | struct descriptor *tail_descriptor_last; | ||
110 | struct descriptor *prev_descriptor; | ||
111 | }; | ||
112 | |||
113 | #define CONFIG_ROM_SIZE 1024 | ||
114 | |||
115 | struct fw_ohci { | ||
116 | struct fw_card card; | ||
117 | |||
118 | __iomem char *registers; | ||
119 | dma_addr_t self_id_bus; | ||
120 | __le32 *self_id_cpu; | ||
121 | struct tasklet_struct bus_reset_tasklet; | ||
122 | int generation; | ||
123 | int request_generation; | ||
124 | |||
125 | /* Spinlock for accessing fw_ohci data. Never call out of | ||
126 | * this driver with this lock held. */ | ||
127 | spinlock_t lock; | ||
128 | u32 self_id_buffer[512]; | ||
129 | |||
130 | /* Config rom buffers */ | ||
131 | __be32 *config_rom; | ||
132 | dma_addr_t config_rom_bus; | ||
133 | __be32 *next_config_rom; | ||
134 | dma_addr_t next_config_rom_bus; | ||
135 | u32 next_header; | ||
136 | |||
137 | struct ar_context ar_request_ctx; | ||
138 | struct ar_context ar_response_ctx; | ||
139 | struct at_context at_request_ctx; | ||
140 | struct at_context at_response_ctx; | ||
141 | |||
142 | u32 it_context_mask; | ||
143 | struct iso_context *it_context_list; | ||
144 | u32 ir_context_mask; | ||
145 | struct iso_context *ir_context_list; | ||
146 | }; | ||
147 | |||
148 | extern inline struct fw_ohci *fw_ohci(struct fw_card *card) | ||
149 | { | ||
150 | return container_of(card, struct fw_ohci, card); | ||
151 | } | ||
152 | |||
153 | #define CONTEXT_CYCLE_MATCH_ENABLE 0x80000000 | ||
154 | |||
155 | #define CONTEXT_RUN 0x8000 | ||
156 | #define CONTEXT_WAKE 0x1000 | ||
157 | #define CONTEXT_DEAD 0x0800 | ||
158 | #define CONTEXT_ACTIVE 0x0400 | ||
159 | |||
160 | #define OHCI1394_MAX_AT_REQ_RETRIES 0x2 | ||
161 | #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 | ||
162 | #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 | ||
163 | |||
164 | #define FW_OHCI_MAJOR 240 | ||
165 | #define OHCI1394_REGISTER_SIZE 0x800 | ||
166 | #define OHCI_LOOP_COUNT 500 | ||
167 | #define OHCI1394_PCI_HCI_Control 0x40 | ||
168 | #define SELF_ID_BUF_SIZE 0x800 | ||
169 | |||
170 | /* FIXME: Move this to linux/pci_ids.h */ | ||
171 | #define PCI_CLASS_SERIAL_FIREWIRE_OHCI 0x0c0010 | ||
172 | |||
173 | static char ohci_driver_name[] = KBUILD_MODNAME; | ||
174 | |||
175 | extern inline void reg_write(const struct fw_ohci *ohci, int offset, u32 data) | ||
176 | { | ||
177 | writel(data, ohci->registers + offset); | ||
178 | } | ||
179 | |||
180 | extern inline u32 reg_read(const struct fw_ohci *ohci, int offset) | ||
181 | { | ||
182 | return readl(ohci->registers + offset); | ||
183 | } | ||
184 | |||
185 | extern inline void flush_writes(const struct fw_ohci *ohci) | ||
186 | { | ||
187 | /* Do a dummy read to flush writes. */ | ||
188 | reg_read(ohci, OHCI1394_Version); | ||
189 | } | ||
190 | |||
191 | static int | ||
192 | ohci_update_phy_reg(struct fw_card *card, int addr, | ||
193 | int clear_bits, int set_bits) | ||
194 | { | ||
195 | struct fw_ohci *ohci = fw_ohci(card); | ||
196 | u32 val, old; | ||
197 | |||
198 | reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr)); | ||
199 | msleep(2); | ||
200 | val = reg_read(ohci, OHCI1394_PhyControl); | ||
201 | if ((val & OHCI1394_PhyControl_ReadDone) == 0) { | ||
202 | fw_error("failed to set phy reg bits.\n"); | ||
203 | return -EBUSY; | ||
204 | } | ||
205 | |||
206 | old = OHCI1394_PhyControl_ReadData(val); | ||
207 | old = (old & ~clear_bits) | set_bits; | ||
208 | reg_write(ohci, OHCI1394_PhyControl, | ||
209 | OHCI1394_PhyControl_Write(addr, old)); | ||
210 | |||
211 | return 0; | ||
212 | } | ||
213 | |||
214 | static void ar_context_run(struct ar_context *ctx) | ||
215 | { | ||
216 | reg_write(ctx->ohci, ctx->command_ptr, ctx->descriptor_bus | 1); | ||
217 | reg_write(ctx->ohci, ctx->control_set, CONTEXT_RUN); | ||
218 | flush_writes(ctx->ohci); | ||
219 | } | ||
220 | |||
221 | static void ar_context_tasklet(unsigned long data) | ||
222 | { | ||
223 | struct ar_context *ctx = (struct ar_context *)data; | ||
224 | struct fw_ohci *ohci = ctx->ohci; | ||
225 | u32 status; | ||
226 | int length, speed, ack, timestamp, tcode; | ||
227 | |||
228 | /* FIXME: What to do about evt_* errors? */ | ||
229 | length = le16_to_cpu(ctx->descriptor.req_count) - | ||
230 | le16_to_cpu(ctx->descriptor.res_count) - 4; | ||
231 | status = le32_to_cpu(ctx->buffer[length / 4]); | ||
232 | ack = ((status >> 16) & 0x1f) - 16; | ||
233 | speed = (status >> 21) & 0x7; | ||
234 | timestamp = status & 0xffff; | ||
235 | |||
236 | ctx->buffer[0] = le32_to_cpu(ctx->buffer[0]); | ||
237 | ctx->buffer[1] = le32_to_cpu(ctx->buffer[1]); | ||
238 | ctx->buffer[2] = le32_to_cpu(ctx->buffer[2]); | ||
239 | |||
240 | tcode = (ctx->buffer[0] >> 4) & 0x0f; | ||
241 | if (TCODE_IS_BLOCK_PACKET(tcode)) | ||
242 | ctx->buffer[3] = le32_to_cpu(ctx->buffer[3]); | ||
243 | |||
244 | /* The OHCI bus reset handler synthesizes a phy packet with | ||
245 | * the new generation number when a bus reset happens (see | ||
246 | * section 8.4.2.3). This helps us determine when a request | ||
247 | * was received and make sure we send the response in the same | ||
248 | * generation. We only need this for requests; for responses | ||
249 | * we use the unique tlabel for finding the matching | ||
250 | * request. */ | ||
251 | |||
252 | if (ack + 16 == 0x09) | ||
253 | ohci->request_generation = (ctx->buffer[2] >> 16) & 0xff; | ||
254 | else if (ctx == &ohci->ar_request_ctx) | ||
255 | fw_core_handle_request(&ohci->card, speed, ack, timestamp, | ||
256 | ohci->request_generation, | ||
257 | length, ctx->buffer); | ||
258 | else | ||
259 | fw_core_handle_response(&ohci->card, speed, ack, timestamp, | ||
260 | length, ctx->buffer); | ||
261 | |||
262 | ctx->descriptor.data_address = cpu_to_le32(ctx->buffer_bus); | ||
263 | ctx->descriptor.req_count = cpu_to_le16(sizeof ctx->buffer); | ||
264 | ctx->descriptor.res_count = cpu_to_le16(sizeof ctx->buffer); | ||
265 | |||
266 | dma_sync_single_for_device(ohci->card.device, ctx->descriptor_bus, | ||
267 | sizeof ctx->descriptor_bus, DMA_TO_DEVICE); | ||
268 | |||
269 | /* FIXME: We stop and restart the ar context here, what if we | ||
270 | * stop while a receive is in progress? Maybe we could just | ||
271 | * loop the context back to itself and use it in buffer fill | ||
272 | * mode as intended... */ | ||
273 | |||
274 | reg_write(ctx->ohci, ctx->control_clear, CONTEXT_RUN); | ||
275 | ar_context_run(ctx); | ||
276 | } | ||
277 | |||
278 | static int | ||
279 | ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci, u32 control_set) | ||
280 | { | ||
281 | ctx->descriptor_bus = | ||
282 | dma_map_single(ohci->card.device, &ctx->descriptor, | ||
283 | sizeof ctx->descriptor, DMA_TO_DEVICE); | ||
284 | if (ctx->descriptor_bus == 0) | ||
285 | return -ENOMEM; | ||
286 | |||
287 | if (ctx->descriptor_bus & 0xf) | ||
288 | fw_notify("descriptor not 16-byte aligned: 0x%08x\n", | ||
289 | ctx->descriptor_bus); | ||
290 | |||
291 | ctx->buffer_bus = | ||
292 | dma_map_single(ohci->card.device, ctx->buffer, | ||
293 | sizeof ctx->buffer, DMA_FROM_DEVICE); | ||
294 | |||
295 | if (ctx->buffer_bus == 0) { | ||
296 | dma_unmap_single(ohci->card.device, ctx->descriptor_bus, | ||
297 | sizeof ctx->descriptor, DMA_TO_DEVICE); | ||
298 | return -ENOMEM; | ||
299 | } | ||
300 | |||
301 | memset(&ctx->descriptor, 0, sizeof ctx->descriptor); | ||
302 | ctx->descriptor.control = cpu_to_le16(descriptor_input_more | | ||
303 | descriptor_status | | ||
304 | descriptor_branch_always); | ||
305 | ctx->descriptor.req_count = cpu_to_le16(sizeof ctx->buffer); | ||
306 | ctx->descriptor.data_address = cpu_to_le32(ctx->buffer_bus); | ||
307 | ctx->descriptor.res_count = cpu_to_le16(sizeof ctx->buffer); | ||
308 | |||
309 | ctx->control_set = control_set; | ||
310 | ctx->control_clear = control_set + 4; | ||
311 | ctx->command_ptr = control_set + 12; | ||
312 | ctx->ohci = ohci; | ||
313 | |||
314 | tasklet_init(&ctx->tasklet, ar_context_tasklet, (unsigned long)ctx); | ||
315 | |||
316 | ar_context_run(ctx); | ||
317 | |||
318 | return 0; | ||
319 | } | ||
320 | |||
321 | static void | ||
322 | do_packet_callbacks(struct fw_ohci *ohci, struct list_head *list) | ||
323 | { | ||
324 | struct fw_packet *p, *next; | ||
325 | |||
326 | list_for_each_entry_safe(p, next, list, link) | ||
327 | p->callback(p, &ohci->card, p->status); | ||
328 | } | ||
329 | |||
330 | static void | ||
331 | complete_transmission(struct fw_packet *packet, | ||
332 | int status, struct list_head *list) | ||
333 | { | ||
334 | list_move_tail(&packet->link, list); | ||
335 | packet->status = status; | ||
336 | } | ||
337 | |||
338 | /* This function prepares the first packet in the context queue for | ||
339 | * transmission. Must always be called with the ochi->lock held to | ||
340 | * ensure proper generation handling and locking around packet queue | ||
341 | * manipulation. */ | ||
342 | static void | ||
343 | at_context_setup_packet(struct at_context *ctx, struct list_head *list) | ||
344 | { | ||
345 | struct fw_packet *packet; | ||
346 | struct fw_ohci *ohci = ctx->ohci; | ||
347 | int z, tcode; | ||
348 | |||
349 | packet = fw_packet(ctx->list.next); | ||
350 | |||
351 | memset(&ctx->d, 0, sizeof ctx->d); | ||
352 | if (packet->payload_length > 0) { | ||
353 | packet->payload_bus = dma_map_single(ohci->card.device, | ||
354 | packet->payload, | ||
355 | packet->payload_length, | ||
356 | DMA_TO_DEVICE); | ||
357 | if (packet->payload_bus == 0) { | ||
358 | complete_transmission(packet, -ENOMEM, list); | ||
359 | return; | ||
360 | } | ||
361 | |||
362 | ctx->d.more.control = | ||
363 | cpu_to_le16(descriptor_output_more | | ||
364 | descriptor_key_immediate); | ||
365 | ctx->d.more.req_count = cpu_to_le16(packet->header_length); | ||
366 | ctx->d.more.res_count = cpu_to_le16(packet->timestamp); | ||
367 | ctx->d.last.control = | ||
368 | cpu_to_le16(descriptor_output_last | | ||
369 | descriptor_irq_always | | ||
370 | descriptor_branch_always); | ||
371 | ctx->d.last.req_count = cpu_to_le16(packet->payload_length); | ||
372 | ctx->d.last.data_address = cpu_to_le32(packet->payload_bus); | ||
373 | z = 3; | ||
374 | } else { | ||
375 | ctx->d.more.control = | ||
376 | cpu_to_le16(descriptor_output_last | | ||
377 | descriptor_key_immediate | | ||
378 | descriptor_irq_always | | ||
379 | descriptor_branch_always); | ||
380 | ctx->d.more.req_count = cpu_to_le16(packet->header_length); | ||
381 | ctx->d.more.res_count = cpu_to_le16(packet->timestamp); | ||
382 | z = 2; | ||
383 | } | ||
384 | |||
385 | /* The DMA format for asyncronous link packets is different | ||
386 | * from the IEEE1394 layout, so shift the fields around | ||
387 | * accordingly. If header_length is 8, it's a PHY packet, to | ||
388 | * which we need to prepend an extra quadlet. */ | ||
389 | if (packet->header_length > 8) { | ||
390 | ctx->d.header[0] = cpu_to_le32((packet->header[0] & 0xffff) | | ||
391 | (packet->speed << 16)); | ||
392 | ctx->d.header[1] = cpu_to_le32((packet->header[1] & 0xffff) | | ||
393 | (packet->header[0] & 0xffff0000)); | ||
394 | ctx->d.header[2] = cpu_to_le32(packet->header[2]); | ||
395 | |||
396 | tcode = (packet->header[0] >> 4) & 0x0f; | ||
397 | if (TCODE_IS_BLOCK_PACKET(tcode)) | ||
398 | ctx->d.header[3] = cpu_to_le32(packet->header[3]); | ||
399 | else | ||
400 | ctx->d.header[3] = packet->header[3]; | ||
401 | } else { | ||
402 | ctx->d.header[0] = | ||
403 | cpu_to_le32((OHCI1394_phy_tcode << 4) | | ||
404 | (packet->speed << 16)); | ||
405 | ctx->d.header[1] = cpu_to_le32(packet->header[0]); | ||
406 | ctx->d.header[2] = cpu_to_le32(packet->header[1]); | ||
407 | ctx->d.more.req_count = cpu_to_le16(12); | ||
408 | } | ||
409 | |||
410 | /* FIXME: Document how the locking works. */ | ||
411 | if (ohci->generation == packet->generation) { | ||
412 | reg_write(ctx->ohci, ctx->command_ptr, | ||
413 | ctx->descriptor_bus | z); | ||
414 | reg_write(ctx->ohci, ctx->control_set, | ||
415 | CONTEXT_RUN | CONTEXT_WAKE); | ||
416 | } else { | ||
417 | /* We dont return error codes from this function; all | ||
418 | * transmission errors are reported through the | ||
419 | * callback. */ | ||
420 | complete_transmission(packet, -ESTALE, list); | ||
421 | } | ||
422 | } | ||
423 | |||
424 | static void at_context_stop(struct at_context *ctx) | ||
425 | { | ||
426 | u32 reg; | ||
427 | |||
428 | reg_write(ctx->ohci, ctx->control_clear, CONTEXT_RUN); | ||
429 | |||
430 | reg = reg_read(ctx->ohci, ctx->control_set); | ||
431 | if (reg & CONTEXT_ACTIVE) | ||
432 | fw_notify("Tried to stop context, but it is still active " | ||
433 | "(0x%08x).\n", reg); | ||
434 | } | ||
435 | |||
436 | static void at_context_tasklet(unsigned long data) | ||
437 | { | ||
438 | struct at_context *ctx = (struct at_context *)data; | ||
439 | struct fw_ohci *ohci = ctx->ohci; | ||
440 | struct fw_packet *packet; | ||
441 | LIST_HEAD(list); | ||
442 | unsigned long flags; | ||
443 | int evt; | ||
444 | |||
445 | spin_lock_irqsave(&ohci->lock, flags); | ||
446 | |||
447 | packet = fw_packet(ctx->list.next); | ||
448 | |||
449 | at_context_stop(ctx); | ||
450 | |||
451 | if (packet->payload_length > 0) { | ||
452 | dma_unmap_single(ohci->card.device, packet->payload_bus, | ||
453 | packet->payload_length, DMA_TO_DEVICE); | ||
454 | evt = le16_to_cpu(ctx->d.last.transfer_status) & 0x1f; | ||
455 | packet->timestamp = le16_to_cpu(ctx->d.last.res_count); | ||
456 | } | ||
457 | else { | ||
458 | evt = le16_to_cpu(ctx->d.more.transfer_status) & 0x1f; | ||
459 | packet->timestamp = le16_to_cpu(ctx->d.more.res_count); | ||
460 | } | ||
461 | |||
462 | if (evt < 16) { | ||
463 | switch (evt) { | ||
464 | case OHCI1394_evt_timeout: | ||
465 | /* Async response transmit timed out. */ | ||
466 | complete_transmission(packet, -ETIMEDOUT, &list); | ||
467 | break; | ||
468 | |||
469 | case OHCI1394_evt_flushed: | ||
470 | /* The packet was flushed should give same | ||
471 | * error as when we try to use a stale | ||
472 | * generation count. */ | ||
473 | complete_transmission(packet, -ESTALE, &list); | ||
474 | break; | ||
475 | |||
476 | case OHCI1394_evt_missing_ack: | ||
477 | /* This would be a higher level software | ||
478 | * error, it is using a valid (current) | ||
479 | * generation count, but the node is not on | ||
480 | * the bus. */ | ||
481 | complete_transmission(packet, -ENODEV, &list); | ||
482 | break; | ||
483 | |||
484 | default: | ||
485 | complete_transmission(packet, -EIO, &list); | ||
486 | break; | ||
487 | } | ||
488 | } else | ||
489 | complete_transmission(packet, evt - 16, &list); | ||
490 | |||
491 | /* If more packets are queued, set up the next one. */ | ||
492 | if (!list_empty(&ctx->list)) | ||
493 | at_context_setup_packet(ctx, &list); | ||
494 | |||
495 | spin_unlock_irqrestore(&ohci->lock, flags); | ||
496 | |||
497 | do_packet_callbacks(ohci, &list); | ||
498 | } | ||
499 | |||
500 | static int | ||
501 | at_context_init(struct at_context *ctx, struct fw_ohci *ohci, u32 control_set) | ||
502 | { | ||
503 | INIT_LIST_HEAD(&ctx->list); | ||
504 | |||
505 | ctx->descriptor_bus = | ||
506 | dma_map_single(ohci->card.device, &ctx->d, | ||
507 | sizeof ctx->d, DMA_TO_DEVICE); | ||
508 | if (ctx->descriptor_bus == 0) | ||
509 | return -ENOMEM; | ||
510 | |||
511 | ctx->control_set = control_set; | ||
512 | ctx->control_clear = control_set + 4; | ||
513 | ctx->command_ptr = control_set + 12; | ||
514 | ctx->ohci = ohci; | ||
515 | |||
516 | tasklet_init(&ctx->tasklet, at_context_tasklet, (unsigned long)ctx); | ||
517 | |||
518 | return 0; | ||
519 | } | ||
520 | |||
521 | static void | ||
522 | at_context_transmit(struct at_context *ctx, struct fw_packet *packet) | ||
523 | { | ||
524 | LIST_HEAD(list); | ||
525 | unsigned long flags; | ||
526 | int was_empty; | ||
527 | |||
528 | spin_lock_irqsave(&ctx->ohci->lock, flags); | ||
529 | |||
530 | was_empty = list_empty(&ctx->list); | ||
531 | list_add_tail(&packet->link, &ctx->list); | ||
532 | if (was_empty) | ||
533 | at_context_setup_packet(ctx, &list); | ||
534 | |||
535 | spin_unlock_irqrestore(&ctx->ohci->lock, flags); | ||
536 | |||
537 | do_packet_callbacks(ctx->ohci, &list); | ||
538 | } | ||
539 | |||
540 | static void bus_reset_tasklet(unsigned long data) | ||
541 | { | ||
542 | struct fw_ohci *ohci = (struct fw_ohci *)data; | ||
543 | int self_id_count, i, j, reg, node_id; | ||
544 | int generation, new_generation; | ||
545 | unsigned long flags; | ||
546 | |||
547 | reg = reg_read(ohci, OHCI1394_NodeID); | ||
548 | if (!(reg & OHCI1394_NodeID_idValid)) { | ||
549 | fw_error("node ID not valid, new bus reset in progress\n"); | ||
550 | return; | ||
551 | } | ||
552 | node_id = reg & 0xffff; | ||
553 | |||
554 | /* The count in the SelfIDCount register is the number of | ||
555 | * bytes in the self ID receive buffer. Since we also receive | ||
556 | * the inverted quadlets and a header quadlet, we shift one | ||
557 | * bit extra to get the actual number of self IDs. */ | ||
558 | |||
559 | self_id_count = (reg_read(ohci, OHCI1394_SelfIDCount) >> 3) & 0x3ff; | ||
560 | generation = (le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff; | ||
561 | |||
562 | for (i = 1, j = 0; j < self_id_count; i += 2, j++) { | ||
563 | if (ohci->self_id_cpu[i] != ~ohci->self_id_cpu[i + 1]) | ||
564 | fw_error("inconsistent self IDs\n"); | ||
565 | ohci->self_id_buffer[j] = le32_to_cpu(ohci->self_id_cpu[i]); | ||
566 | } | ||
567 | |||
568 | /* Check the consistency of the self IDs we just read. The | ||
569 | * problem we face is that a new bus reset can start while we | ||
570 | * read out the self IDs from the DMA buffer. If this happens, | ||
571 | * the DMA buffer will be overwritten with new self IDs and we | ||
572 | * will read out inconsistent data. The OHCI specification | ||
573 | * (section 11.2) recommends a technique similar to | ||
574 | * linux/seqlock.h, where we remember the generation of the | ||
575 | * self IDs in the buffer before reading them out and compare | ||
576 | * it to the current generation after reading them out. If | ||
577 | * the two generations match we know we have a consistent set | ||
578 | * of self IDs. */ | ||
579 | |||
580 | new_generation = (reg_read(ohci, OHCI1394_SelfIDCount) >> 16) & 0xff; | ||
581 | if (new_generation != generation) { | ||
582 | fw_notify("recursive bus reset detected, " | ||
583 | "discarding self ids\n"); | ||
584 | return; | ||
585 | } | ||
586 | |||
587 | /* FIXME: Document how the locking works. */ | ||
588 | spin_lock_irqsave(&ohci->lock, flags); | ||
589 | |||
590 | ohci->generation = generation; | ||
591 | at_context_stop(&ohci->at_request_ctx); | ||
592 | at_context_stop(&ohci->at_response_ctx); | ||
593 | reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset); | ||
594 | |||
595 | /* This next bit is unrelated to the AT context stuff but we | ||
596 | * have to do it under the spinlock also. If a new config rom | ||
597 | * was set up before this reset, the old one is now no longer | ||
598 | * in use and we can free it. Update the config rom pointers | ||
599 | * to point to the current config rom and clear the | ||
600 | * next_config_rom pointer so a new udpate can take place. */ | ||
601 | |||
602 | if (ohci->next_config_rom != NULL) { | ||
603 | dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, | ||
604 | ohci->config_rom, ohci->config_rom_bus); | ||
605 | ohci->config_rom = ohci->next_config_rom; | ||
606 | ohci->config_rom_bus = ohci->next_config_rom_bus; | ||
607 | ohci->next_config_rom = NULL; | ||
608 | |||
609 | /* Restore config_rom image and manually update | ||
610 | * config_rom registers. Writing the header quadlet | ||
611 | * will indicate that the config rom is ready, so we | ||
612 | * do that last. */ | ||
613 | reg_write(ohci, OHCI1394_BusOptions, | ||
614 | be32_to_cpu(ohci->config_rom[2])); | ||
615 | ohci->config_rom[0] = cpu_to_be32(ohci->next_header); | ||
616 | reg_write(ohci, OHCI1394_ConfigROMhdr, ohci->next_header); | ||
617 | } | ||
618 | |||
619 | spin_unlock_irqrestore(&ohci->lock, flags); | ||
620 | |||
621 | fw_core_handle_bus_reset(&ohci->card, node_id, generation, | ||
622 | self_id_count, ohci->self_id_buffer); | ||
623 | } | ||
624 | |||
625 | static irqreturn_t irq_handler(int irq, void *data) | ||
626 | { | ||
627 | struct fw_ohci *ohci = data; | ||
628 | u32 event, iso_event; | ||
629 | int i; | ||
630 | |||
631 | event = reg_read(ohci, OHCI1394_IntEventClear); | ||
632 | |||
633 | if (!event) | ||
634 | return IRQ_NONE; | ||
635 | |||
636 | reg_write(ohci, OHCI1394_IntEventClear, event); | ||
637 | |||
638 | if (event & OHCI1394_selfIDComplete) | ||
639 | tasklet_schedule(&ohci->bus_reset_tasklet); | ||
640 | |||
641 | if (event & OHCI1394_RQPkt) | ||
642 | tasklet_schedule(&ohci->ar_request_ctx.tasklet); | ||
643 | |||
644 | if (event & OHCI1394_RSPkt) | ||
645 | tasklet_schedule(&ohci->ar_response_ctx.tasklet); | ||
646 | |||
647 | if (event & OHCI1394_reqTxComplete) | ||
648 | tasklet_schedule(&ohci->at_request_ctx.tasklet); | ||
649 | |||
650 | if (event & OHCI1394_respTxComplete) | ||
651 | tasklet_schedule(&ohci->at_response_ctx.tasklet); | ||
652 | |||
653 | iso_event = reg_read(ohci, OHCI1394_IsoRecvIntEventSet); | ||
654 | reg_write(ohci, OHCI1394_IsoRecvIntEventClear, iso_event); | ||
655 | |||
656 | while (iso_event) { | ||
657 | i = ffs(iso_event) - 1; | ||
658 | tasklet_schedule(&ohci->ir_context_list[i].tasklet); | ||
659 | iso_event &= ~(1 << i); | ||
660 | } | ||
661 | |||
662 | iso_event = reg_read(ohci, OHCI1394_IsoXmitIntEventSet); | ||
663 | reg_write(ohci, OHCI1394_IsoXmitIntEventClear, iso_event); | ||
664 | |||
665 | while (iso_event) { | ||
666 | i = ffs(iso_event) - 1; | ||
667 | tasklet_schedule(&ohci->it_context_list[i].tasklet); | ||
668 | iso_event &= ~(1 << i); | ||
669 | } | ||
670 | |||
671 | return IRQ_HANDLED; | ||
672 | } | ||
673 | |||
674 | static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) | ||
675 | { | ||
676 | struct fw_ohci *ohci = fw_ohci(card); | ||
677 | struct pci_dev *dev = to_pci_dev(card->device); | ||
678 | |||
679 | /* When the link is not yet enabled, the atomic config rom | ||
680 | * update mechanism described below in ohci_set_config_rom() | ||
681 | * is not active. We have to update ConfigRomHeader and | ||
682 | * BusOptions manually, and the write to ConfigROMmap takes | ||
683 | * effect immediately. We tie this to the enabling of the | ||
684 | * link, so we have a valid config rom before enabling - the | ||
685 | * OHCI requires that ConfigROMhdr and BusOptions have valid | ||
686 | * values before enabling. | ||
687 | * | ||
688 | * However, when the ConfigROMmap is written, some controllers | ||
689 | * always read back quadlets 0 and 2 from the config rom to | ||
690 | * the ConfigRomHeader and BusOptions registers on bus reset. | ||
691 | * They shouldn't do that in this initial case where the link | ||
692 | * isn't enabled. This means we have to use the same | ||
693 | * workaround here, setting the bus header to 0 and then write | ||
694 | * the right values in the bus reset tasklet. | ||
695 | */ | ||
696 | |||
697 | ohci->next_config_rom = | ||
698 | dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE, | ||
699 | &ohci->next_config_rom_bus, GFP_KERNEL); | ||
700 | if (ohci->next_config_rom == NULL) | ||
701 | return -ENOMEM; | ||
702 | |||
703 | memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE); | ||
704 | fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4); | ||
705 | |||
706 | ohci->next_header = config_rom[0]; | ||
707 | ohci->next_config_rom[0] = 0; | ||
708 | reg_write(ohci, OHCI1394_ConfigROMhdr, 0); | ||
709 | reg_write(ohci, OHCI1394_BusOptions, config_rom[2]); | ||
710 | reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus); | ||
711 | |||
712 | reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000); | ||
713 | |||
714 | if (request_irq(dev->irq, irq_handler, | ||
715 | SA_SHIRQ, ohci_driver_name, ohci)) { | ||
716 | fw_error("Failed to allocate shared interrupt %d.\n", | ||
717 | dev->irq); | ||
718 | dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, | ||
719 | ohci->config_rom, ohci->config_rom_bus); | ||
720 | return -EIO; | ||
721 | } | ||
722 | |||
723 | reg_write(ohci, OHCI1394_HCControlSet, | ||
724 | OHCI1394_HCControl_linkEnable | | ||
725 | OHCI1394_HCControl_BIBimageValid); | ||
726 | flush_writes(ohci); | ||
727 | |||
728 | /* We are ready to go, initiate bus reset to finish the | ||
729 | * initialization. */ | ||
730 | |||
731 | fw_core_initiate_bus_reset(&ohci->card, 1); | ||
732 | |||
733 | return 0; | ||
734 | } | ||
735 | |||
736 | static int | ||
737 | ohci_set_config_rom(struct fw_card *card, u32 *config_rom, size_t length) | ||
738 | { | ||
739 | struct fw_ohci *ohci; | ||
740 | unsigned long flags; | ||
741 | int retval = 0; | ||
742 | __be32 *next_config_rom; | ||
743 | dma_addr_t next_config_rom_bus; | ||
744 | |||
745 | ohci = fw_ohci(card); | ||
746 | |||
747 | /* When the OHCI controller is enabled, the config rom update | ||
748 | * mechanism is a bit tricky, but easy enough to use. See | ||
749 | * section 5.5.6 in the OHCI specification. | ||
750 | * | ||
751 | * The OHCI controller caches the new config rom address in a | ||
752 | * shadow register (ConfigROMmapNext) and needs a bus reset | ||
753 | * for the changes to take place. When the bus reset is | ||
754 | * detected, the controller loads the new values for the | ||
755 | * ConfigRomHeader and BusOptions registers from the specified | ||
756 | * config rom and loads ConfigROMmap from the ConfigROMmapNext | ||
757 | * shadow register. All automatically and atomically. | ||
758 | * | ||
759 | * Now, there's a twist to this story. The automatic load of | ||
760 | * ConfigRomHeader and BusOptions doesn't honor the | ||
761 | * noByteSwapData bit, so with a be32 config rom, the | ||
762 | * controller will load be32 values in to these registers | ||
763 | * during the atomic update, even on litte endian | ||
764 | * architectures. The workaround we use is to put a 0 in the | ||
765 | * header quadlet; 0 is endian agnostic and means that the | ||
766 | * config rom isn't ready yet. In the bus reset tasklet we | ||
767 | * then set up the real values for the two registers. | ||
768 | * | ||
769 | * We use ohci->lock to avoid racing with the code that sets | ||
770 | * ohci->next_config_rom to NULL (see bus_reset_tasklet). | ||
771 | */ | ||
772 | |||
773 | next_config_rom = | ||
774 | dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE, | ||
775 | &next_config_rom_bus, GFP_KERNEL); | ||
776 | if (next_config_rom == NULL) | ||
777 | return -ENOMEM; | ||
778 | |||
779 | spin_lock_irqsave(&ohci->lock, flags); | ||
780 | |||
781 | if (ohci->next_config_rom == NULL) { | ||
782 | ohci->next_config_rom = next_config_rom; | ||
783 | ohci->next_config_rom_bus = next_config_rom_bus; | ||
784 | |||
785 | memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE); | ||
786 | fw_memcpy_to_be32(ohci->next_config_rom, config_rom, | ||
787 | length * 4); | ||
788 | |||
789 | ohci->next_header = config_rom[0]; | ||
790 | ohci->next_config_rom[0] = 0; | ||
791 | |||
792 | reg_write(ohci, OHCI1394_ConfigROMmap, | ||
793 | ohci->next_config_rom_bus); | ||
794 | } else { | ||
795 | dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, | ||
796 | next_config_rom, next_config_rom_bus); | ||
797 | retval = -EBUSY; | ||
798 | } | ||
799 | |||
800 | spin_unlock_irqrestore(&ohci->lock, flags); | ||
801 | |||
802 | /* Now initiate a bus reset to have the changes take | ||
803 | * effect. We clean up the old config rom memory and DMA | ||
804 | * mappings in the bus reset tasklet, since the OHCI | ||
805 | * controller could need to access it before the bus reset | ||
806 | * takes effect. */ | ||
807 | if (retval == 0) | ||
808 | fw_core_initiate_bus_reset(&ohci->card, 1); | ||
809 | |||
810 | return retval; | ||
811 | } | ||
812 | |||
813 | static void ohci_send_request(struct fw_card *card, struct fw_packet *packet) | ||
814 | { | ||
815 | struct fw_ohci *ohci = fw_ohci(card); | ||
816 | |||
817 | at_context_transmit(&ohci->at_request_ctx, packet); | ||
818 | } | ||
819 | |||
820 | static void ohci_send_response(struct fw_card *card, struct fw_packet *packet) | ||
821 | { | ||
822 | struct fw_ohci *ohci = fw_ohci(card); | ||
823 | |||
824 | at_context_transmit(&ohci->at_response_ctx, packet); | ||
825 | } | ||
826 | |||
827 | static int | ||
828 | ohci_enable_phys_dma(struct fw_card *card, int node_id, int generation) | ||
829 | { | ||
830 | struct fw_ohci *ohci = fw_ohci(card); | ||
831 | unsigned long flags; | ||
832 | int retval = 0; | ||
833 | |||
834 | /* FIXME: make sure this bitmask is cleared when we clear the | ||
835 | * busReset interrupt bit. */ | ||
836 | |||
837 | spin_lock_irqsave(&ohci->lock, flags); | ||
838 | |||
839 | if (ohci->generation != generation) { | ||
840 | retval = -ESTALE; | ||
841 | goto out; | ||
842 | } | ||
843 | |||
844 | if (node_id < 32) { | ||
845 | reg_write(ohci, OHCI1394_PhyReqFilterLoSet, 1 << node_id); | ||
846 | } else { | ||
847 | reg_write(ohci, OHCI1394_PhyReqFilterHiSet, | ||
848 | 1 << (node_id - 32)); | ||
849 | } | ||
850 | flush_writes(ohci); | ||
851 | |||
852 | spin_unlock_irqrestore(&ohci->lock, flags); | ||
853 | |||
854 | out: | ||
855 | return retval; | ||
856 | } | ||
857 | |||
858 | static void ir_context_tasklet(unsigned long data) | ||
859 | { | ||
860 | struct iso_context *ctx = (struct iso_context *)data; | ||
861 | |||
862 | (void)ctx; | ||
863 | } | ||
864 | |||
865 | #define ISO_BUFFER_SIZE (64 * 1024) | ||
866 | |||
867 | static void flush_iso_context(struct iso_context *ctx) | ||
868 | { | ||
869 | struct fw_ohci *ohci = fw_ohci(ctx->base.card); | ||
870 | struct descriptor *d, *last; | ||
871 | u32 address; | ||
872 | int z; | ||
873 | |||
874 | dma_sync_single_for_cpu(ohci->card.device, ctx->buffer_bus, | ||
875 | ISO_BUFFER_SIZE, DMA_TO_DEVICE); | ||
876 | |||
877 | d = ctx->tail_descriptor; | ||
878 | last = ctx->tail_descriptor_last; | ||
879 | |||
880 | while (last->branch_address != 0 && last->transfer_status != 0) { | ||
881 | address = le32_to_cpu(last->branch_address); | ||
882 | z = address & 0xf; | ||
883 | d = ctx->buffer + (address - ctx->buffer_bus) / sizeof *d; | ||
884 | |||
885 | if (z == 2) | ||
886 | last = d; | ||
887 | else | ||
888 | last = d + z - 1; | ||
889 | |||
890 | if (le16_to_cpu(last->control) & descriptor_irq_always) | ||
891 | ctx->base.callback(&ctx->base, | ||
892 | 0, le16_to_cpu(last->res_count), | ||
893 | ctx->base.callback_data); | ||
894 | } | ||
895 | |||
896 | ctx->tail_descriptor = d; | ||
897 | ctx->tail_descriptor_last = last; | ||
898 | } | ||
899 | |||
900 | static void it_context_tasklet(unsigned long data) | ||
901 | { | ||
902 | struct iso_context *ctx = (struct iso_context *)data; | ||
903 | |||
904 | flush_iso_context(ctx); | ||
905 | } | ||
906 | |||
907 | static struct fw_iso_context *ohci_allocate_iso_context(struct fw_card *card, | ||
908 | int type) | ||
909 | { | ||
910 | struct fw_ohci *ohci = fw_ohci(card); | ||
911 | struct iso_context *ctx, *list; | ||
912 | void (*tasklet) (unsigned long data); | ||
913 | u32 *mask; | ||
914 | unsigned long flags; | ||
915 | int index; | ||
916 | |||
917 | if (type == FW_ISO_CONTEXT_TRANSMIT) { | ||
918 | mask = &ohci->it_context_mask; | ||
919 | list = ohci->it_context_list; | ||
920 | tasklet = it_context_tasklet; | ||
921 | } else { | ||
922 | mask = &ohci->ir_context_mask; | ||
923 | list = ohci->ir_context_list; | ||
924 | tasklet = ir_context_tasklet; | ||
925 | } | ||
926 | |||
927 | spin_lock_irqsave(&ohci->lock, flags); | ||
928 | index = ffs(*mask) - 1; | ||
929 | if (index >= 0) | ||
930 | *mask &= ~(1 << index); | ||
931 | spin_unlock_irqrestore(&ohci->lock, flags); | ||
932 | |||
933 | if (index < 0) | ||
934 | return ERR_PTR(-EBUSY); | ||
935 | |||
936 | ctx = &list[index]; | ||
937 | memset(ctx, 0, sizeof *ctx); | ||
938 | tasklet_init(&ctx->tasklet, tasklet, (unsigned long)ctx); | ||
939 | |||
940 | ctx->buffer = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL); | ||
941 | if (ctx->buffer == NULL) { | ||
942 | spin_lock_irqsave(&ohci->lock, flags); | ||
943 | *mask |= 1 << index; | ||
944 | spin_unlock_irqrestore(&ohci->lock, flags); | ||
945 | return ERR_PTR(-ENOMEM); | ||
946 | } | ||
947 | |||
948 | ctx->buffer_bus = | ||
949 | dma_map_single(card->device, ctx->buffer, | ||
950 | ISO_BUFFER_SIZE, DMA_TO_DEVICE); | ||
951 | |||
952 | ctx->head_descriptor = ctx->buffer; | ||
953 | ctx->prev_descriptor = ctx->buffer; | ||
954 | ctx->tail_descriptor = ctx->buffer; | ||
955 | ctx->tail_descriptor_last = ctx->buffer; | ||
956 | |||
957 | /* We put a dummy descriptor in the buffer that has a NULL | ||
958 | * branch address and looks like it's been sent. That way we | ||
959 | * have a descriptor to append DMA programs to. Also, the | ||
960 | * ring buffer invariant is that it always has at least one | ||
961 | * element so that head == tail means buffer full. */ | ||
962 | |||
963 | memset(ctx->head_descriptor, 0, sizeof *ctx->head_descriptor); | ||
964 | ctx->head_descriptor->control = | ||
965 | cpu_to_le16(descriptor_output_last); | ||
966 | ctx->head_descriptor->transfer_status = cpu_to_le16(0x8011); | ||
967 | ctx->head_descriptor++; | ||
968 | |||
969 | return &ctx->base; | ||
970 | } | ||
971 | |||
972 | static int ohci_send_iso(struct fw_iso_context *base, s32 cycle) | ||
973 | { | ||
974 | struct iso_context *ctx = (struct iso_context *)base; | ||
975 | struct fw_ohci *ohci = fw_ohci(ctx->base.card); | ||
976 | u32 cycle_match = 0; | ||
977 | int index; | ||
978 | |||
979 | index = ctx - ohci->it_context_list; | ||
980 | if (cycle > 0) | ||
981 | cycle_match = CONTEXT_CYCLE_MATCH_ENABLE | | ||
982 | (cycle & 0x7fff) << 16; | ||
983 | |||
984 | reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << index); | ||
985 | reg_write(ohci, OHCI1394_IsoXmitCommandPtr(index), | ||
986 | le32_to_cpu(ctx->tail_descriptor_last->branch_address)); | ||
987 | reg_write(ohci, OHCI1394_IsoXmitContextControlClear(index), ~0); | ||
988 | reg_write(ohci, OHCI1394_IsoXmitContextControlSet(index), | ||
989 | CONTEXT_RUN | cycle_match); | ||
990 | flush_writes(ohci); | ||
991 | |||
992 | return 0; | ||
993 | } | ||
994 | |||
995 | static void ohci_free_iso_context(struct fw_iso_context *base) | ||
996 | { | ||
997 | struct fw_ohci *ohci = fw_ohci(base->card); | ||
998 | struct iso_context *ctx = (struct iso_context *)base; | ||
999 | unsigned long flags; | ||
1000 | int index; | ||
1001 | |||
1002 | flush_iso_context(ctx); | ||
1003 | |||
1004 | spin_lock_irqsave(&ohci->lock, flags); | ||
1005 | |||
1006 | if (ctx->base.type == FW_ISO_CONTEXT_TRANSMIT) { | ||
1007 | index = ctx - ohci->it_context_list; | ||
1008 | reg_write(ohci, OHCI1394_IsoXmitContextControlClear(index), ~0); | ||
1009 | reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 1 << index); | ||
1010 | ohci->it_context_mask |= 1 << index; | ||
1011 | } else { | ||
1012 | index = ctx - ohci->ir_context_list; | ||
1013 | reg_write(ohci, OHCI1394_IsoRcvContextControlClear(index), ~0); | ||
1014 | reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 1 << index); | ||
1015 | ohci->ir_context_mask |= 1 << index; | ||
1016 | } | ||
1017 | flush_writes(ohci); | ||
1018 | |||
1019 | dma_unmap_single(ohci->card.device, ctx->buffer_bus, | ||
1020 | ISO_BUFFER_SIZE, DMA_TO_DEVICE); | ||
1021 | |||
1022 | spin_unlock_irqrestore(&ohci->lock, flags); | ||
1023 | } | ||
1024 | |||
1025 | static int | ||
1026 | ohci_queue_iso(struct fw_iso_context *base, | ||
1027 | struct fw_iso_packet *packet, void *payload) | ||
1028 | { | ||
1029 | struct iso_context *ctx = (struct iso_context *)base; | ||
1030 | struct fw_ohci *ohci = fw_ohci(ctx->base.card); | ||
1031 | struct descriptor *d, *end, *last, *tail, *pd; | ||
1032 | struct fw_iso_packet *p; | ||
1033 | __le32 *header; | ||
1034 | dma_addr_t d_bus; | ||
1035 | u32 z, header_z, payload_z, irq; | ||
1036 | u32 payload_index, payload_end_index, next_page_index; | ||
1037 | int index, page, end_page, i, length, offset; | ||
1038 | |||
1039 | /* FIXME: Cycle lost behavior should be configurable: lose | ||
1040 | * packet, retransmit or terminate.. */ | ||
1041 | |||
1042 | p = packet; | ||
1043 | payload_index = payload - ctx->base.buffer; | ||
1044 | d = ctx->head_descriptor; | ||
1045 | tail = ctx->tail_descriptor; | ||
1046 | end = ctx->buffer + ISO_BUFFER_SIZE / sizeof(struct descriptor); | ||
1047 | |||
1048 | if (p->skip) | ||
1049 | z = 1; | ||
1050 | else | ||
1051 | z = 2; | ||
1052 | if (p->header_length > 0) | ||
1053 | z++; | ||
1054 | |||
1055 | /* Determine the first page the payload isn't contained in. */ | ||
1056 | end_page = PAGE_ALIGN(payload_index + p->payload_length) >> PAGE_SHIFT; | ||
1057 | if (p->payload_length > 0) | ||
1058 | payload_z = end_page - (payload_index >> PAGE_SHIFT); | ||
1059 | else | ||
1060 | payload_z = 0; | ||
1061 | |||
1062 | z += payload_z; | ||
1063 | |||
1064 | /* Get header size in number of descriptors. */ | ||
1065 | header_z = DIV_ROUND_UP(p->header_length, sizeof *d); | ||
1066 | |||
1067 | if (d + z + header_z <= tail) { | ||
1068 | goto has_space; | ||
1069 | } else if (d > tail && d + z + header_z <= end) { | ||
1070 | goto has_space; | ||
1071 | } else if (d > tail && ctx->buffer + z + header_z <= tail) { | ||
1072 | d = ctx->buffer; | ||
1073 | goto has_space; | ||
1074 | } | ||
1075 | |||
1076 | /* No space in buffer */ | ||
1077 | return -1; | ||
1078 | |||
1079 | has_space: | ||
1080 | memset(d, 0, (z + header_z) * sizeof *d); | ||
1081 | d_bus = ctx->buffer_bus + (d - ctx->buffer) * sizeof *d; | ||
1082 | |||
1083 | if (!p->skip) { | ||
1084 | d[0].control = cpu_to_le16(descriptor_key_immediate); | ||
1085 | d[0].req_count = cpu_to_le16(8); | ||
1086 | |||
1087 | header = (__le32 *) &d[1]; | ||
1088 | header[0] = cpu_to_le32(it_header_sy(p->sy) | | ||
1089 | it_header_tag(p->tag) | | ||
1090 | it_header_tcode(TCODE_STREAM_DATA) | | ||
1091 | it_header_channel(ctx->base.channel) | | ||
1092 | it_header_speed(ctx->base.speed)); | ||
1093 | header[1] = | ||
1094 | cpu_to_le32(it_header_data_length(p->header_length + | ||
1095 | p->payload_length)); | ||
1096 | } | ||
1097 | |||
1098 | if (p->header_length > 0) { | ||
1099 | d[2].req_count = cpu_to_le16(p->header_length); | ||
1100 | d[2].data_address = cpu_to_le32(d_bus + z * sizeof *d); | ||
1101 | memcpy(&d[z], p->header, p->header_length); | ||
1102 | } | ||
1103 | |||
1104 | pd = d + z - payload_z; | ||
1105 | payload_end_index = payload_index + p->payload_length; | ||
1106 | for (i = 0; i < payload_z; i++) { | ||
1107 | page = payload_index >> PAGE_SHIFT; | ||
1108 | offset = payload_index & ~PAGE_MASK; | ||
1109 | next_page_index = (page + 1) << PAGE_SHIFT; | ||
1110 | length = | ||
1111 | min(next_page_index, payload_end_index) - payload_index; | ||
1112 | pd[i].req_count = cpu_to_le16(length); | ||
1113 | pd[i].data_address = cpu_to_le32(ctx->base.pages[page] + offset); | ||
1114 | |||
1115 | payload_index += length; | ||
1116 | } | ||
1117 | |||
1118 | if (z == 2) | ||
1119 | last = d; | ||
1120 | else | ||
1121 | last = d + z - 1; | ||
1122 | |||
1123 | if (p->interrupt) | ||
1124 | irq = descriptor_irq_always; | ||
1125 | else | ||
1126 | irq = descriptor_no_irq; | ||
1127 | |||
1128 | last->control = cpu_to_le16(descriptor_output_last | | ||
1129 | descriptor_status | | ||
1130 | descriptor_branch_always | | ||
1131 | irq); | ||
1132 | |||
1133 | dma_sync_single_for_device(ohci->card.device, ctx->buffer_bus, | ||
1134 | ISO_BUFFER_SIZE, DMA_TO_DEVICE); | ||
1135 | |||
1136 | ctx->head_descriptor = d + z + header_z; | ||
1137 | ctx->prev_descriptor->branch_address = cpu_to_le32(d_bus | z); | ||
1138 | ctx->prev_descriptor = last; | ||
1139 | |||
1140 | index = ctx - ohci->it_context_list; | ||
1141 | reg_write(ohci, OHCI1394_IsoXmitContextControlSet(index), CONTEXT_WAKE); | ||
1142 | flush_writes(ohci); | ||
1143 | |||
1144 | return 0; | ||
1145 | } | ||
1146 | |||
1147 | static struct fw_card_driver ohci_driver = { | ||
1148 | .name = ohci_driver_name, | ||
1149 | .enable = ohci_enable, | ||
1150 | .update_phy_reg = ohci_update_phy_reg, | ||
1151 | .set_config_rom = ohci_set_config_rom, | ||
1152 | .send_request = ohci_send_request, | ||
1153 | .send_response = ohci_send_response, | ||
1154 | .enable_phys_dma = ohci_enable_phys_dma, | ||
1155 | |||
1156 | .allocate_iso_context = ohci_allocate_iso_context, | ||
1157 | .free_iso_context = ohci_free_iso_context, | ||
1158 | .queue_iso = ohci_queue_iso, | ||
1159 | .send_iso = ohci_send_iso | ||
1160 | }; | ||
1161 | |||
1162 | static int software_reset(struct fw_ohci *ohci) | ||
1163 | { | ||
1164 | int i; | ||
1165 | |||
1166 | reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset); | ||
1167 | |||
1168 | for (i = 0; i < OHCI_LOOP_COUNT; i++) { | ||
1169 | if ((reg_read(ohci, OHCI1394_HCControlSet) & | ||
1170 | OHCI1394_HCControl_softReset) == 0) | ||
1171 | return 0; | ||
1172 | msleep(1); | ||
1173 | } | ||
1174 | |||
1175 | return -EBUSY; | ||
1176 | } | ||
1177 | |||
1178 | /* ---------- pci subsystem interface ---------- */ | ||
1179 | |||
1180 | enum { | ||
1181 | CLEANUP_SELF_ID, | ||
1182 | CLEANUP_REGISTERS, | ||
1183 | CLEANUP_IOMEM, | ||
1184 | CLEANUP_DISABLE, | ||
1185 | CLEANUP_PUT_CARD, | ||
1186 | }; | ||
1187 | |||
1188 | static int cleanup(struct fw_ohci *ohci, int stage, int code) | ||
1189 | { | ||
1190 | struct pci_dev *dev = to_pci_dev(ohci->card.device); | ||
1191 | |||
1192 | switch (stage) { | ||
1193 | case CLEANUP_SELF_ID: | ||
1194 | dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE, | ||
1195 | ohci->self_id_cpu, ohci->self_id_bus); | ||
1196 | case CLEANUP_REGISTERS: | ||
1197 | kfree(ohci->it_context_list); | ||
1198 | kfree(ohci->ir_context_list); | ||
1199 | pci_iounmap(dev, ohci->registers); | ||
1200 | case CLEANUP_IOMEM: | ||
1201 | pci_release_region(dev, 0); | ||
1202 | case CLEANUP_DISABLE: | ||
1203 | pci_disable_device(dev); | ||
1204 | case CLEANUP_PUT_CARD: | ||
1205 | fw_card_put(&ohci->card); | ||
1206 | } | ||
1207 | |||
1208 | return code; | ||
1209 | } | ||
1210 | |||
1211 | static int __devinit | ||
1212 | pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) | ||
1213 | { | ||
1214 | struct fw_ohci *ohci; | ||
1215 | u32 bus_options, max_receive, link_speed; | ||
1216 | u64 guid; | ||
1217 | int error_code; | ||
1218 | size_t size; | ||
1219 | |||
1220 | ohci = kzalloc(sizeof *ohci, GFP_KERNEL); | ||
1221 | if (ohci == NULL) { | ||
1222 | fw_error("Could not malloc fw_ohci data.\n"); | ||
1223 | return -ENOMEM; | ||
1224 | } | ||
1225 | |||
1226 | fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev); | ||
1227 | |||
1228 | if (pci_enable_device(dev)) { | ||
1229 | fw_error("Failed to enable OHCI hardware.\n"); | ||
1230 | return cleanup(ohci, CLEANUP_PUT_CARD, -ENODEV); | ||
1231 | } | ||
1232 | |||
1233 | pci_set_master(dev); | ||
1234 | pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0); | ||
1235 | pci_set_drvdata(dev, ohci); | ||
1236 | |||
1237 | spin_lock_init(&ohci->lock); | ||
1238 | |||
1239 | tasklet_init(&ohci->bus_reset_tasklet, | ||
1240 | bus_reset_tasklet, (unsigned long)ohci); | ||
1241 | |||
1242 | if (pci_request_region(dev, 0, ohci_driver_name)) { | ||
1243 | fw_error("MMIO resource unavailable\n"); | ||
1244 | return cleanup(ohci, CLEANUP_DISABLE, -EBUSY); | ||
1245 | } | ||
1246 | |||
1247 | ohci->registers = pci_iomap(dev, 0, OHCI1394_REGISTER_SIZE); | ||
1248 | if (ohci->registers == NULL) { | ||
1249 | fw_error("Failed to remap registers\n"); | ||
1250 | return cleanup(ohci, CLEANUP_IOMEM, -ENXIO); | ||
1251 | } | ||
1252 | |||
1253 | if (software_reset(ohci)) { | ||
1254 | fw_error("Failed to reset ohci card.\n"); | ||
1255 | return cleanup(ohci, CLEANUP_REGISTERS, -EBUSY); | ||
1256 | } | ||
1257 | |||
1258 | /* Now enable LPS, which we need in order to start accessing | ||
1259 | * most of the registers. In fact, on some cards (ALI M5251), | ||
1260 | * accessing registers in the SClk domain without LPS enabled | ||
1261 | * will lock up the machine. Wait 50msec to make sure we have | ||
1262 | * full link enabled. */ | ||
1263 | reg_write(ohci, OHCI1394_HCControlSet, | ||
1264 | OHCI1394_HCControl_LPS | | ||
1265 | OHCI1394_HCControl_postedWriteEnable); | ||
1266 | flush_writes(ohci); | ||
1267 | msleep(50); | ||
1268 | |||
1269 | reg_write(ohci, OHCI1394_HCControlClear, | ||
1270 | OHCI1394_HCControl_noByteSwapData); | ||
1271 | |||
1272 | reg_write(ohci, OHCI1394_LinkControlSet, | ||
1273 | OHCI1394_LinkControl_rcvSelfID | | ||
1274 | OHCI1394_LinkControl_cycleTimerEnable | | ||
1275 | OHCI1394_LinkControl_cycleMaster); | ||
1276 | |||
1277 | ar_context_init(&ohci->ar_request_ctx, ohci, | ||
1278 | OHCI1394_AsReqRcvContextControlSet); | ||
1279 | |||
1280 | ar_context_init(&ohci->ar_response_ctx, ohci, | ||
1281 | OHCI1394_AsRspRcvContextControlSet); | ||
1282 | |||
1283 | at_context_init(&ohci->at_request_ctx, ohci, | ||
1284 | OHCI1394_AsReqTrContextControlSet); | ||
1285 | |||
1286 | at_context_init(&ohci->at_response_ctx, ohci, | ||
1287 | OHCI1394_AsRspTrContextControlSet); | ||
1288 | |||
1289 | reg_write(ohci, OHCI1394_ATRetries, | ||
1290 | OHCI1394_MAX_AT_REQ_RETRIES | | ||
1291 | (OHCI1394_MAX_AT_RESP_RETRIES << 4) | | ||
1292 | (OHCI1394_MAX_PHYS_RESP_RETRIES << 8)); | ||
1293 | |||
1294 | reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0); | ||
1295 | ohci->it_context_mask = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet); | ||
1296 | reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0); | ||
1297 | size = sizeof(struct iso_context) * hweight32(ohci->it_context_mask); | ||
1298 | ohci->it_context_list = kzalloc(size, GFP_KERNEL); | ||
1299 | |||
1300 | reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, ~0); | ||
1301 | ohci->ir_context_mask = reg_read(ohci, OHCI1394_IsoXmitIntMaskSet); | ||
1302 | reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, ~0); | ||
1303 | size = sizeof(struct iso_context) * hweight32(ohci->ir_context_mask); | ||
1304 | ohci->ir_context_list = kzalloc(size, GFP_KERNEL); | ||
1305 | |||
1306 | if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) { | ||
1307 | fw_error("Out of memory for it/ir contexts.\n"); | ||
1308 | return cleanup(ohci, CLEANUP_REGISTERS, -ENOMEM); | ||
1309 | } | ||
1310 | |||
1311 | /* self-id dma buffer allocation */ | ||
1312 | ohci->self_id_cpu = dma_alloc_coherent(ohci->card.device, | ||
1313 | SELF_ID_BUF_SIZE, | ||
1314 | &ohci->self_id_bus, | ||
1315 | GFP_KERNEL); | ||
1316 | if (ohci->self_id_cpu == NULL) { | ||
1317 | fw_error("Out of memory for self ID buffer.\n"); | ||
1318 | return cleanup(ohci, CLEANUP_REGISTERS, -ENOMEM); | ||
1319 | } | ||
1320 | |||
1321 | reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); | ||
1322 | reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000); | ||
1323 | reg_write(ohci, OHCI1394_IntEventClear, ~0); | ||
1324 | reg_write(ohci, OHCI1394_IntMaskClear, ~0); | ||
1325 | reg_write(ohci, OHCI1394_IntMaskSet, | ||
1326 | OHCI1394_selfIDComplete | | ||
1327 | OHCI1394_RQPkt | OHCI1394_RSPkt | | ||
1328 | OHCI1394_reqTxComplete | OHCI1394_respTxComplete | | ||
1329 | OHCI1394_isochRx | OHCI1394_isochTx | | ||
1330 | OHCI1394_masterIntEnable); | ||
1331 | |||
1332 | bus_options = reg_read(ohci, OHCI1394_BusOptions); | ||
1333 | max_receive = (bus_options >> 12) & 0xf; | ||
1334 | link_speed = bus_options & 0x7; | ||
1335 | guid = ((u64) reg_read(ohci, OHCI1394_GUIDHi) << 32) | | ||
1336 | reg_read(ohci, OHCI1394_GUIDLo); | ||
1337 | |||
1338 | error_code = fw_card_add(&ohci->card, max_receive, link_speed, guid); | ||
1339 | if (error_code < 0) | ||
1340 | return cleanup(ohci, CLEANUP_SELF_ID, error_code); | ||
1341 | |||
1342 | fw_notify("Added fw-ohci device %s.\n", dev->dev.bus_id); | ||
1343 | |||
1344 | return 0; | ||
1345 | } | ||
1346 | |||
1347 | static void pci_remove(struct pci_dev *dev) | ||
1348 | { | ||
1349 | struct fw_ohci *ohci; | ||
1350 | |||
1351 | ohci = pci_get_drvdata(dev); | ||
1352 | reg_write(ohci, OHCI1394_IntMaskClear, OHCI1394_masterIntEnable); | ||
1353 | fw_core_remove_card(&ohci->card); | ||
1354 | |||
1355 | /* FIXME: Fail all pending packets here, now that the upper | ||
1356 | * layers can't queue any more. */ | ||
1357 | |||
1358 | software_reset(ohci); | ||
1359 | free_irq(dev->irq, ohci); | ||
1360 | cleanup(ohci, CLEANUP_SELF_ID, 0); | ||
1361 | |||
1362 | fw_notify("Removed fw-ohci device.\n"); | ||
1363 | } | ||
1364 | |||
1365 | static struct pci_device_id pci_table[] = { | ||
1366 | { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_FIREWIRE_OHCI, ~0) }, | ||
1367 | { } | ||
1368 | }; | ||
1369 | |||
1370 | MODULE_DEVICE_TABLE(pci, pci_table); | ||
1371 | |||
1372 | static struct pci_driver fw_ohci_pci_driver = { | ||
1373 | .name = ohci_driver_name, | ||
1374 | .id_table = pci_table, | ||
1375 | .probe = pci_probe, | ||
1376 | .remove = pci_remove, | ||
1377 | }; | ||
1378 | |||
1379 | MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>"); | ||
1380 | MODULE_DESCRIPTION("Driver for PCI OHCI IEEE1394 controllers"); | ||
1381 | MODULE_LICENSE("GPL"); | ||
1382 | |||
1383 | static int __init fw_ohci_init(void) | ||
1384 | { | ||
1385 | return pci_register_driver(&fw_ohci_pci_driver); | ||
1386 | } | ||
1387 | |||
1388 | static void __exit fw_ohci_cleanup(void) | ||
1389 | { | ||
1390 | pci_unregister_driver(&fw_ohci_pci_driver); | ||
1391 | } | ||
1392 | |||
1393 | module_init(fw_ohci_init); | ||
1394 | module_exit(fw_ohci_cleanup); | ||
diff --git a/drivers/firewire/fw-ohci.h b/drivers/firewire/fw-ohci.h new file mode 100644 index 000000000000..35e2a759e017 --- /dev/null +++ b/drivers/firewire/fw-ohci.h | |||
@@ -0,0 +1,152 @@ | |||
1 | #ifndef __fw_ohci_h | ||
2 | #define __fw_ohci_h | ||
3 | |||
4 | /* OHCI register map */ | ||
5 | |||
6 | #define OHCI1394_Version 0x000 | ||
7 | #define OHCI1394_GUID_ROM 0x004 | ||
8 | #define OHCI1394_ATRetries 0x008 | ||
9 | #define OHCI1394_CSRData 0x00C | ||
10 | #define OHCI1394_CSRCompareData 0x010 | ||
11 | #define OHCI1394_CSRControl 0x014 | ||
12 | #define OHCI1394_ConfigROMhdr 0x018 | ||
13 | #define OHCI1394_BusID 0x01C | ||
14 | #define OHCI1394_BusOptions 0x020 | ||
15 | #define OHCI1394_GUIDHi 0x024 | ||
16 | #define OHCI1394_GUIDLo 0x028 | ||
17 | #define OHCI1394_ConfigROMmap 0x034 | ||
18 | #define OHCI1394_PostedWriteAddressLo 0x038 | ||
19 | #define OHCI1394_PostedWriteAddressHi 0x03C | ||
20 | #define OHCI1394_VendorID 0x040 | ||
21 | #define OHCI1394_HCControlSet 0x050 | ||
22 | #define OHCI1394_HCControlClear 0x054 | ||
23 | #define OHCI1394_HCControl_BIBimageValid 0x80000000 | ||
24 | #define OHCI1394_HCControl_noByteSwapData 0x40000000 | ||
25 | #define OHCI1394_HCControl_programPhyEnable 0x00800000 | ||
26 | #define OHCI1394_HCControl_aPhyEnhanceEnable 0x00400000 | ||
27 | #define OHCI1394_HCControl_LPS 0x00080000 | ||
28 | #define OHCI1394_HCControl_postedWriteEnable 0x00040000 | ||
29 | #define OHCI1394_HCControl_linkEnable 0x00020000 | ||
30 | #define OHCI1394_HCControl_softReset 0x00010000 | ||
31 | #define OHCI1394_SelfIDBuffer 0x064 | ||
32 | #define OHCI1394_SelfIDCount 0x068 | ||
33 | #define OHCI1394_IRMultiChanMaskHiSet 0x070 | ||
34 | #define OHCI1394_IRMultiChanMaskHiClear 0x074 | ||
35 | #define OHCI1394_IRMultiChanMaskLoSet 0x078 | ||
36 | #define OHCI1394_IRMultiChanMaskLoClear 0x07C | ||
37 | #define OHCI1394_IntEventSet 0x080 | ||
38 | #define OHCI1394_IntEventClear 0x084 | ||
39 | #define OHCI1394_IntMaskSet 0x088 | ||
40 | #define OHCI1394_IntMaskClear 0x08C | ||
41 | #define OHCI1394_IsoXmitIntEventSet 0x090 | ||
42 | #define OHCI1394_IsoXmitIntEventClear 0x094 | ||
43 | #define OHCI1394_IsoXmitIntMaskSet 0x098 | ||
44 | #define OHCI1394_IsoXmitIntMaskClear 0x09C | ||
45 | #define OHCI1394_IsoRecvIntEventSet 0x0A0 | ||
46 | #define OHCI1394_IsoRecvIntEventClear 0x0A4 | ||
47 | #define OHCI1394_IsoRecvIntMaskSet 0x0A8 | ||
48 | #define OHCI1394_IsoRecvIntMaskClear 0x0AC | ||
49 | #define OHCI1394_InitialBandwidthAvailable 0x0B0 | ||
50 | #define OHCI1394_InitialChannelsAvailableHi 0x0B4 | ||
51 | #define OHCI1394_InitialChannelsAvailableLo 0x0B8 | ||
52 | #define OHCI1394_FairnessControl 0x0DC | ||
53 | #define OHCI1394_LinkControlSet 0x0E0 | ||
54 | #define OHCI1394_LinkControlClear 0x0E4 | ||
55 | #define OHCI1394_LinkControl_rcvSelfID (1 << 9) | ||
56 | #define OHCI1394_LinkControl_rcvPhyPkt (1 << 10) | ||
57 | #define OHCI1394_LinkControl_cycleTimerEnable (1 << 20) | ||
58 | #define OHCI1394_LinkControl_cycleMaster (1 << 21) | ||
59 | #define OHCI1394_LinkControl_cycleSource (1 << 22) | ||
60 | #define OHCI1394_NodeID 0x0E8 | ||
61 | #define OHCI1394_NodeID_idValid 0x80000000 | ||
62 | #define OHCI1394_PhyControl 0x0EC | ||
63 | #define OHCI1394_PhyControl_Read(addr) (((addr) << 8) | 0x00008000) | ||
64 | #define OHCI1394_PhyControl_ReadDone 0x80000000 | ||
65 | #define OHCI1394_PhyControl_ReadData(r) (((r) & 0x00ff0000) >> 16) | ||
66 | #define OHCI1394_PhyControl_Write(addr, data) (((addr) << 8) | (data) | 0x00004000) | ||
67 | #define OHCI1394_PhyControl_WriteDone 0x00004000 | ||
68 | #define OHCI1394_IsochronousCycleTimer 0x0F0 | ||
69 | #define OHCI1394_AsReqFilterHiSet 0x100 | ||
70 | #define OHCI1394_AsReqFilterHiClear 0x104 | ||
71 | #define OHCI1394_AsReqFilterLoSet 0x108 | ||
72 | #define OHCI1394_AsReqFilterLoClear 0x10C | ||
73 | #define OHCI1394_PhyReqFilterHiSet 0x110 | ||
74 | #define OHCI1394_PhyReqFilterHiClear 0x114 | ||
75 | #define OHCI1394_PhyReqFilterLoSet 0x118 | ||
76 | #define OHCI1394_PhyReqFilterLoClear 0x11C | ||
77 | #define OHCI1394_PhyUpperBound 0x120 | ||
78 | |||
79 | #define OHCI1394_AsReqTrContextBase 0x180 | ||
80 | #define OHCI1394_AsReqTrContextControlSet 0x180 | ||
81 | #define OHCI1394_AsReqTrContextControlClear 0x184 | ||
82 | #define OHCI1394_AsReqTrCommandPtr 0x18C | ||
83 | |||
84 | #define OHCI1394_AsRspTrContextBase 0x1A0 | ||
85 | #define OHCI1394_AsRspTrContextControlSet 0x1A0 | ||
86 | #define OHCI1394_AsRspTrContextControlClear 0x1A4 | ||
87 | #define OHCI1394_AsRspTrCommandPtr 0x1AC | ||
88 | |||
89 | #define OHCI1394_AsReqRcvContextBase 0x1C0 | ||
90 | #define OHCI1394_AsReqRcvContextControlSet 0x1C0 | ||
91 | #define OHCI1394_AsReqRcvContextControlClear 0x1C4 | ||
92 | #define OHCI1394_AsReqRcvCommandPtr 0x1CC | ||
93 | |||
94 | #define OHCI1394_AsRspRcvContextBase 0x1E0 | ||
95 | #define OHCI1394_AsRspRcvContextControlSet 0x1E0 | ||
96 | #define OHCI1394_AsRspRcvContextControlClear 0x1E4 | ||
97 | #define OHCI1394_AsRspRcvCommandPtr 0x1EC | ||
98 | |||
99 | /* Isochronous transmit registers */ | ||
100 | #define OHCI1394_IsoXmitContextBase(n) (0x200 + 16 * (n)) | ||
101 | #define OHCI1394_IsoXmitContextControlSet(n) (0x200 + 16 * (n)) | ||
102 | #define OHCI1394_IsoXmitContextControlClear(n) (0x204 + 16 * (n)) | ||
103 | #define OHCI1394_IsoXmitCommandPtr(n) (0x20C + 16 * (n)) | ||
104 | |||
105 | /* Isochronous receive registers */ | ||
106 | #define OHCI1394_IsoRcvContextControlSet(n) (0x400 + 32 * (n)) | ||
107 | #define OHCI1394_IsoRcvContextControlClear(n) (0x404 + 32 * (n)) | ||
108 | #define OHCI1394_IsoRcvCommandPtr(n) (0x40C + 32 * (n)) | ||
109 | #define OHCI1394_IsoRcvContextMatch(n) (0x410 + 32 * (n)) | ||
110 | |||
111 | /* Interrupts Mask/Events */ | ||
112 | #define OHCI1394_reqTxComplete 0x00000001 | ||
113 | #define OHCI1394_respTxComplete 0x00000002 | ||
114 | #define OHCI1394_ARRQ 0x00000004 | ||
115 | #define OHCI1394_ARRS 0x00000008 | ||
116 | #define OHCI1394_RQPkt 0x00000010 | ||
117 | #define OHCI1394_RSPkt 0x00000020 | ||
118 | #define OHCI1394_isochTx 0x00000040 | ||
119 | #define OHCI1394_isochRx 0x00000080 | ||
120 | #define OHCI1394_postedWriteErr 0x00000100 | ||
121 | #define OHCI1394_lockRespErr 0x00000200 | ||
122 | #define OHCI1394_selfIDComplete 0x00010000 | ||
123 | #define OHCI1394_busReset 0x00020000 | ||
124 | #define OHCI1394_phy 0x00080000 | ||
125 | #define OHCI1394_cycleSynch 0x00100000 | ||
126 | #define OHCI1394_cycle64Seconds 0x00200000 | ||
127 | #define OHCI1394_cycleLost 0x00400000 | ||
128 | #define OHCI1394_cycleInconsistent 0x00800000 | ||
129 | #define OHCI1394_unrecoverableError 0x01000000 | ||
130 | #define OHCI1394_cycleTooLong 0x02000000 | ||
131 | #define OHCI1394_phyRegRcvd 0x04000000 | ||
132 | #define OHCI1394_masterIntEnable 0x80000000 | ||
133 | |||
134 | #define OHCI1394_evt_no_status 0x0 | ||
135 | #define OHCI1394_evt_long_packet 0x2 | ||
136 | #define OHCI1394_evt_missing_ack 0x3 | ||
137 | #define OHCI1394_evt_underrun 0x4 | ||
138 | #define OHCI1394_evt_overrun 0x5 | ||
139 | #define OHCI1394_evt_descriptor_read 0x6 | ||
140 | #define OHCI1394_evt_data_read 0x7 | ||
141 | #define OHCI1394_evt_data_write 0x8 | ||
142 | #define OHCI1394_evt_bus_reset 0x9 | ||
143 | #define OHCI1394_evt_timeout 0xa | ||
144 | #define OHCI1394_evt_tcode_err 0xb | ||
145 | #define OHCI1394_evt_reserved_b 0xc | ||
146 | #define OHCI1394_evt_reserved_c 0xd | ||
147 | #define OHCI1394_evt_unknown 0xe | ||
148 | #define OHCI1394_evt_flushed 0xf | ||
149 | |||
150 | #define OHCI1394_phy_tcode 0xe | ||
151 | |||
152 | #endif /* __fw_ohci_h */ | ||