USB: musb: fix data toggle saving with shared FIFO

For some strange reason the host side musb_giveback() decides
that it's always got an IN transfer when the hardware endpoint
is using a shared FIFO.  This causes musb_save_toggle() to read
the toggle state from the RXCSR register instead of TXCSR, and
may also cause unneeded reloading of RX endpoint registers.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 1 insertions, 6 deletions

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index c74ebadd4b9d..fc79e76b3845 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -335,16 +335,11 @@ musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
 static struct musb_qh *
 musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
 {
-        int                     is_in;
         struct musb_hw_ep       *ep = qh->hw_ep;
         struct musb             *musb = ep->musb;
+        int                     is_in = usb_pipein(urb->pipe);
         int                     ready = qh->is_ready;
 
-        if (ep->is_shared_fifo)
-                is_in = 1;
-        else
-                is_in = usb_pipein(urb->pipe);
-
         /* save toggle eagerly, for paranoia */
         switch (qh->type) {
         case USB_ENDPOINT_XFER_BULK: