diff options
author | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2008-09-17 14:53:55 -0400 |
---|---|---|
committer | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2008-10-05 14:39:21 -0400 |
commit | 965ebf33ea5afb6386f5b57cc71e6572253746b3 (patch) | |
tree | a4ee6bdce1a3a9c133c36a5463d12baa089591d9 /drivers | |
parent | 6b918657b7431e4c5c953b8222ae2f4fc1b2576a (diff) |
atmel-mci: support multiple mmc slots
The Atmel MCI controller can drive multiple cards through separate sets
of pins, but only one at a time. This patch adds support for
multiplexing access to the controller so that multiple card slots can be
used as if they were hooked up to separate mmc controllers.
The atmel-mci driver registers each slot as a separate mmc_host. Both
access the same common controller state, but they also have some state
on their own for card detection/write protect handling, and separate
shadows of the MR and SDCR registers.
When one of the slots receives a request from the mmc core, the common
controller state is checked. If it's idle, the request is submitted
immediately. If not, the request is added to a queue. When a request is
done, the queue is checked and if there is a queued request, it is
submitted before the completion callback is called.
This patch also includes a few cleanups and fixes, including a locking
overhaul. I had to change the locking extensively in any case, so I
might as well try to get it right. The driver no longer takes any
irq-safe locks, which may or may not improve the overall system
performance.
This patch also adds a bit of documentation of the internal data
structures.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mmc/host/atmel-mci.c | 922 |
1 files changed, 614 insertions, 308 deletions
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 8170905a0401..d8ab35175a53 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c | |||
@@ -42,20 +42,86 @@ enum { | |||
42 | }; | 42 | }; |
43 | 43 | ||
44 | enum atmel_mci_state { | 44 | enum atmel_mci_state { |
45 | STATE_SENDING_CMD = 0, | 45 | STATE_IDLE = 0, |
46 | STATE_SENDING_CMD, | ||
46 | STATE_SENDING_DATA, | 47 | STATE_SENDING_DATA, |
47 | STATE_DATA_BUSY, | 48 | STATE_DATA_BUSY, |
48 | STATE_SENDING_STOP, | 49 | STATE_SENDING_STOP, |
49 | STATE_DATA_ERROR, | 50 | STATE_DATA_ERROR, |
50 | }; | 51 | }; |
51 | 52 | ||
53 | /** | ||
54 | * struct atmel_mci - MMC controller state shared between all slots | ||
55 | * @lock: Spinlock protecting the queue and associated data. | ||
56 | * @regs: Pointer to MMIO registers. | ||
57 | * @sg: Scatterlist entry currently being processed by PIO code, if any. | ||
58 | * @pio_offset: Offset into the current scatterlist entry. | ||
59 | * @cur_slot: The slot which is currently using the controller. | ||
60 | * @mrq: The request currently being processed on @cur_slot, | ||
61 | * or NULL if the controller is idle. | ||
62 | * @cmd: The command currently being sent to the card, or NULL. | ||
63 | * @data: The data currently being transferred, or NULL if no data | ||
64 | * transfer is in progress. | ||
65 | * @cmd_status: Snapshot of SR taken upon completion of the current | ||
66 | * command. Only valid when EVENT_CMD_COMPLETE is pending. | ||
67 | * @data_status: Snapshot of SR taken upon completion of the current | ||
68 | * data transfer. Only valid when EVENT_DATA_COMPLETE or | ||
69 | * EVENT_DATA_ERROR is pending. | ||
70 | * @stop_cmdr: Value to be loaded into CMDR when the stop command is | ||
71 | * to be sent. | ||
72 | * @tasklet: Tasklet running the request state machine. | ||
73 | * @pending_events: Bitmask of events flagged by the interrupt handler | ||
74 | * to be processed by the tasklet. | ||
75 | * @completed_events: Bitmask of events which the state machine has | ||
76 | * processed. | ||
77 | * @state: Tasklet state. | ||
78 | * @queue: List of slots waiting for access to the controller. | ||
79 | * @need_clock_update: Update the clock rate before the next request. | ||
80 | * @need_reset: Reset controller before next request. | ||
81 | * @mode_reg: Value of the MR register. | ||
82 | * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus | ||
83 | * rate and timeout calculations. | ||
84 | * @mapbase: Physical address of the MMIO registers. | ||
85 | * @mck: The peripheral bus clock hooked up to the MMC controller. | ||
86 | * @pdev: Platform device associated with the MMC controller. | ||
87 | * @slot: Slots sharing this MMC controller. | ||
88 | * | ||
89 | * Locking | ||
90 | * ======= | ||
91 | * | ||
92 | * @lock is a softirq-safe spinlock protecting @queue as well as | ||
93 | * @cur_slot, @mrq and @state. These must always be updated | ||
94 | * at the same time while holding @lock. | ||
95 | * | ||
96 | * @lock also protects mode_reg and need_clock_update since these are | ||
97 | * used to synchronize mode register updates with the queue | ||
98 | * processing. | ||
99 | * | ||
100 | * The @mrq field of struct atmel_mci_slot is also protected by @lock, | ||
101 | * and must always be written at the same time as the slot is added to | ||
102 | * @queue. | ||
103 | * | ||
104 | * @pending_events and @completed_events are accessed using atomic bit | ||
105 | * operations, so they don't need any locking. | ||
106 | * | ||
107 | * None of the fields touched by the interrupt handler need any | ||
108 | * locking. However, ordering is important: Before EVENT_DATA_ERROR or | ||
109 | * EVENT_DATA_COMPLETE is set in @pending_events, all data-related | ||
110 | * interrupts must be disabled and @data_status updated with a | ||
111 | * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the | ||
112 | * CMDRDY interupt must be disabled and @cmd_status updated with a | ||
113 | * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the | ||
114 | * bytes_xfered field of @data must be written. This is ensured by | ||
115 | * using barriers. | ||
116 | */ | ||
52 | struct atmel_mci { | 117 | struct atmel_mci { |
53 | struct mmc_host *mmc; | 118 | spinlock_t lock; |
54 | void __iomem *regs; | 119 | void __iomem *regs; |
55 | 120 | ||
56 | struct scatterlist *sg; | 121 | struct scatterlist *sg; |
57 | unsigned int pio_offset; | 122 | unsigned int pio_offset; |
58 | 123 | ||
124 | struct atmel_mci_slot *cur_slot; | ||
59 | struct mmc_request *mrq; | 125 | struct mmc_request *mrq; |
60 | struct mmc_command *cmd; | 126 | struct mmc_command *cmd; |
61 | struct mmc_data *data; | 127 | struct mmc_data *data; |
@@ -64,25 +130,59 @@ struct atmel_mci { | |||
64 | u32 data_status; | 130 | u32 data_status; |
65 | u32 stop_cmdr; | 131 | u32 stop_cmdr; |
66 | 132 | ||
67 | u32 mode_reg; | ||
68 | u32 sdc_reg; | ||
69 | |||
70 | struct tasklet_struct tasklet; | 133 | struct tasklet_struct tasklet; |
71 | unsigned long pending_events; | 134 | unsigned long pending_events; |
72 | unsigned long completed_events; | 135 | unsigned long completed_events; |
73 | enum atmel_mci_state state; | 136 | enum atmel_mci_state state; |
137 | struct list_head queue; | ||
74 | 138 | ||
75 | int present; | 139 | bool need_clock_update; |
76 | int detect_pin; | 140 | bool need_reset; |
77 | int wp_pin; | 141 | u32 mode_reg; |
78 | |||
79 | /* For detect pin debouncing */ | ||
80 | struct timer_list detect_timer; | ||
81 | |||
82 | unsigned long bus_hz; | 142 | unsigned long bus_hz; |
83 | unsigned long mapbase; | 143 | unsigned long mapbase; |
84 | struct clk *mck; | 144 | struct clk *mck; |
85 | struct platform_device *pdev; | 145 | struct platform_device *pdev; |
146 | |||
147 | struct atmel_mci_slot *slot[ATMEL_MCI_MAX_NR_SLOTS]; | ||
148 | }; | ||
149 | |||
150 | /** | ||
151 | * struct atmel_mci_slot - MMC slot state | ||
152 | * @mmc: The mmc_host representing this slot. | ||
153 | * @host: The MMC controller this slot is using. | ||
154 | * @sdc_reg: Value of SDCR to be written before using this slot. | ||
155 | * @mrq: mmc_request currently being processed or waiting to be | ||
156 | * processed, or NULL when the slot is idle. | ||
157 | * @queue_node: List node for placing this node in the @queue list of | ||
158 | * &struct atmel_mci. | ||
159 | * @clock: Clock rate configured by set_ios(). Protected by host->lock. | ||
160 | * @flags: Random state bits associated with the slot. | ||
161 | * @detect_pin: GPIO pin used for card detection, or negative if not | ||
162 | * available. | ||
163 | * @wp_pin: GPIO pin used for card write protect sending, or negative | ||
164 | * if not available. | ||
165 | * @detect_timer: Timer used for debouncing @detect_pin interrupts. | ||
166 | */ | ||
167 | struct atmel_mci_slot { | ||
168 | struct mmc_host *mmc; | ||
169 | struct atmel_mci *host; | ||
170 | |||
171 | u32 sdc_reg; | ||
172 | |||
173 | struct mmc_request *mrq; | ||
174 | struct list_head queue_node; | ||
175 | |||
176 | unsigned int clock; | ||
177 | unsigned long flags; | ||
178 | #define ATMCI_CARD_PRESENT 0 | ||
179 | #define ATMCI_CARD_NEED_INIT 1 | ||
180 | #define ATMCI_SHUTDOWN 2 | ||
181 | |||
182 | int detect_pin; | ||
183 | int wp_pin; | ||
184 | |||
185 | struct timer_list detect_timer; | ||
86 | }; | 186 | }; |
87 | 187 | ||
88 | #define atmci_test_and_clear_pending(host, event) \ | 188 | #define atmci_test_and_clear_pending(host, event) \ |
@@ -98,14 +198,15 @@ struct atmel_mci { | |||
98 | */ | 198 | */ |
99 | static int atmci_req_show(struct seq_file *s, void *v) | 199 | static int atmci_req_show(struct seq_file *s, void *v) |
100 | { | 200 | { |
101 | struct atmel_mci *host = s->private; | 201 | struct atmel_mci_slot *slot = s->private; |
102 | struct mmc_request *mrq = host->mrq; | 202 | struct mmc_request *mrq; |
103 | struct mmc_command *cmd; | 203 | struct mmc_command *cmd; |
104 | struct mmc_command *stop; | 204 | struct mmc_command *stop; |
105 | struct mmc_data *data; | 205 | struct mmc_data *data; |
106 | 206 | ||
107 | /* Make sure we get a consistent snapshot */ | 207 | /* Make sure we get a consistent snapshot */ |
108 | spin_lock_irq(&host->mmc->lock); | 208 | spin_lock_bh(&slot->host->lock); |
209 | mrq = slot->mrq; | ||
109 | 210 | ||
110 | if (mrq) { | 211 | if (mrq) { |
111 | cmd = mrq->cmd; | 212 | cmd = mrq->cmd; |
@@ -130,7 +231,7 @@ static int atmci_req_show(struct seq_file *s, void *v) | |||
130 | stop->resp[2], stop->error); | 231 | stop->resp[2], stop->error); |
131 | } | 232 | } |
132 | 233 | ||
133 | spin_unlock_irq(&host->mmc->lock); | 234 | spin_unlock_bh(&slot->host->lock); |
134 | 235 | ||
135 | return 0; | 236 | return 0; |
136 | } | 237 | } |
@@ -193,12 +294,16 @@ static int atmci_regs_show(struct seq_file *s, void *v) | |||
193 | if (!buf) | 294 | if (!buf) |
194 | return -ENOMEM; | 295 | return -ENOMEM; |
195 | 296 | ||
196 | /* Grab a more or less consistent snapshot */ | 297 | /* |
197 | spin_lock_irq(&host->mmc->lock); | 298 | * Grab a more or less consistent snapshot. Note that we're |
299 | * not disabling interrupts, so IMR and SR may not be | ||
300 | * consistent. | ||
301 | */ | ||
302 | spin_lock_bh(&host->lock); | ||
198 | clk_enable(host->mck); | 303 | clk_enable(host->mck); |
199 | memcpy_fromio(buf, host->regs, MCI_REGS_SIZE); | 304 | memcpy_fromio(buf, host->regs, MCI_REGS_SIZE); |
200 | clk_disable(host->mck); | 305 | clk_disable(host->mck); |
201 | spin_unlock_irq(&host->mmc->lock); | 306 | spin_unlock_bh(&host->lock); |
202 | 307 | ||
203 | seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n", | 308 | seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n", |
204 | buf[MCI_MR / 4], | 309 | buf[MCI_MR / 4], |
@@ -236,13 +341,13 @@ static const struct file_operations atmci_regs_fops = { | |||
236 | .release = single_release, | 341 | .release = single_release, |
237 | }; | 342 | }; |
238 | 343 | ||
239 | static void atmci_init_debugfs(struct atmel_mci *host) | 344 | static void atmci_init_debugfs(struct atmel_mci_slot *slot) |
240 | { | 345 | { |
241 | struct mmc_host *mmc; | 346 | struct mmc_host *mmc = slot->mmc; |
242 | struct dentry *root; | 347 | struct atmel_mci *host = slot->host; |
243 | struct dentry *node; | 348 | struct dentry *root; |
349 | struct dentry *node; | ||
244 | 350 | ||
245 | mmc = host->mmc; | ||
246 | root = mmc->debugfs_root; | 351 | root = mmc->debugfs_root; |
247 | if (!root) | 352 | if (!root) |
248 | return; | 353 | return; |
@@ -254,7 +359,7 @@ static void atmci_init_debugfs(struct atmel_mci *host) | |||
254 | if (!node) | 359 | if (!node) |
255 | goto err; | 360 | goto err; |
256 | 361 | ||
257 | node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops); | 362 | node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops); |
258 | if (!node) | 363 | if (!node) |
259 | goto err; | 364 | goto err; |
260 | 365 | ||
@@ -275,8 +380,7 @@ static void atmci_init_debugfs(struct atmel_mci *host) | |||
275 | return; | 380 | return; |
276 | 381 | ||
277 | err: | 382 | err: |
278 | dev_err(&host->pdev->dev, | 383 | dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); |
279 | "failed to initialize debugfs for controller\n"); | ||
280 | } | 384 | } |
281 | 385 | ||
282 | static inline unsigned int ns_to_clocks(struct atmel_mci *host, | 386 | static inline unsigned int ns_to_clocks(struct atmel_mci *host, |
@@ -286,7 +390,7 @@ static inline unsigned int ns_to_clocks(struct atmel_mci *host, | |||
286 | } | 390 | } |
287 | 391 | ||
288 | static void atmci_set_timeout(struct atmel_mci *host, | 392 | static void atmci_set_timeout(struct atmel_mci *host, |
289 | struct mmc_data *data) | 393 | struct atmel_mci_slot *slot, struct mmc_data *data) |
290 | { | 394 | { |
291 | static unsigned dtomul_to_shift[] = { | 395 | static unsigned dtomul_to_shift[] = { |
292 | 0, 4, 7, 8, 10, 12, 16, 20 | 396 | 0, 4, 7, 8, 10, 12, 16, 20 |
@@ -309,7 +413,7 @@ static void atmci_set_timeout(struct atmel_mci *host, | |||
309 | dtocyc = 15; | 413 | dtocyc = 15; |
310 | } | 414 | } |
311 | 415 | ||
312 | dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n", | 416 | dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n", |
313 | dtocyc << dtomul_to_shift[dtomul]); | 417 | dtocyc << dtomul_to_shift[dtomul]); |
314 | mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc))); | 418 | mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc))); |
315 | } | 419 | } |
@@ -362,13 +466,12 @@ static u32 atmci_prepare_command(struct mmc_host *mmc, | |||
362 | } | 466 | } |
363 | 467 | ||
364 | static void atmci_start_command(struct atmel_mci *host, | 468 | static void atmci_start_command(struct atmel_mci *host, |
365 | struct mmc_command *cmd, | 469 | struct mmc_command *cmd, u32 cmd_flags) |
366 | u32 cmd_flags) | ||
367 | { | 470 | { |
368 | WARN_ON(host->cmd); | 471 | WARN_ON(host->cmd); |
369 | host->cmd = cmd; | 472 | host->cmd = cmd; |
370 | 473 | ||
371 | dev_vdbg(&host->mmc->class_dev, | 474 | dev_vdbg(&host->pdev->dev, |
372 | "start command: ARGR=0x%08x CMDR=0x%08x\n", | 475 | "start command: ARGR=0x%08x CMDR=0x%08x\n", |
373 | cmd->arg, cmd_flags); | 476 | cmd->arg, cmd_flags); |
374 | 477 | ||
@@ -376,32 +479,19 @@ static void atmci_start_command(struct atmel_mci *host, | |||
376 | mci_writel(host, CMDR, cmd_flags); | 479 | mci_writel(host, CMDR, cmd_flags); |
377 | } | 480 | } |
378 | 481 | ||
379 | static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data) | 482 | static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) |
380 | { | 483 | { |
381 | struct atmel_mci *host = mmc_priv(mmc); | ||
382 | |||
383 | atmci_start_command(host, data->stop, host->stop_cmdr); | 484 | atmci_start_command(host, data->stop, host->stop_cmdr); |
384 | mci_writel(host, IER, MCI_CMDRDY); | 485 | mci_writel(host, IER, MCI_CMDRDY); |
385 | } | 486 | } |
386 | 487 | ||
387 | static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq) | ||
388 | { | ||
389 | struct atmel_mci *host = mmc_priv(mmc); | ||
390 | |||
391 | WARN_ON(host->cmd || host->data); | ||
392 | host->mrq = NULL; | ||
393 | |||
394 | mmc_request_done(mmc, mrq); | ||
395 | } | ||
396 | |||
397 | /* | 488 | /* |
398 | * Returns a mask of interrupt flags to be enabled after the whole | 489 | * Returns a mask of interrupt flags to be enabled after the whole |
399 | * request has been prepared. | 490 | * request has been prepared. |
400 | */ | 491 | */ |
401 | static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) | 492 | static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) |
402 | { | 493 | { |
403 | struct atmel_mci *host = mmc_priv(mmc); | 494 | u32 iflags; |
404 | u32 iflags; | ||
405 | 495 | ||
406 | data->error = -EINPROGRESS; | 496 | data->error = -EINPROGRESS; |
407 | 497 | ||
@@ -409,10 +499,19 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) | |||
409 | host->sg = NULL; | 499 | host->sg = NULL; |
410 | host->data = data; | 500 | host->data = data; |
411 | 501 | ||
412 | dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n", | ||
413 | MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); | ||
414 | |||
415 | iflags = ATMCI_DATA_ERROR_FLAGS; | 502 | iflags = ATMCI_DATA_ERROR_FLAGS; |
503 | |||
504 | /* | ||
505 | * Errata: MMC data write operation with less than 12 | ||
506 | * bytes is impossible. | ||
507 | * | ||
508 | * Errata: MCI Transmit Data Register (TDR) FIFO | ||
509 | * corruption when length is not multiple of 4. | ||
510 | */ | ||
511 | if (data->blocks * data->blksz < 12 | ||
512 | || (data->blocks * data->blksz) & 3) | ||
513 | host->need_reset = true; | ||
514 | |||
416 | host->sg = data->sg; | 515 | host->sg = data->sg; |
417 | host->pio_offset = 0; | 516 | host->pio_offset = 0; |
418 | if (data->flags & MMC_DATA_READ) | 517 | if (data->flags & MMC_DATA_READ) |
@@ -423,62 +522,62 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) | |||
423 | return iflags; | 522 | return iflags; |
424 | } | 523 | } |
425 | 524 | ||
426 | static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) | 525 | static void atmci_start_request(struct atmel_mci *host, |
526 | struct atmel_mci_slot *slot) | ||
427 | { | 527 | { |
428 | struct atmel_mci *host = mmc_priv(mmc); | 528 | struct mmc_request *mrq; |
429 | struct mmc_data *data; | ||
430 | struct mmc_command *cmd; | 529 | struct mmc_command *cmd; |
530 | struct mmc_data *data; | ||
431 | u32 iflags; | 531 | u32 iflags; |
432 | u32 cmdflags = 0; | 532 | u32 cmdflags; |
433 | |||
434 | iflags = mci_readl(host, IMR); | ||
435 | if (iflags) | ||
436 | dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n", | ||
437 | mci_readl(host, IMR)); | ||
438 | |||
439 | WARN_ON(host->mrq != NULL); | ||
440 | |||
441 | /* | ||
442 | * We may "know" the card is gone even though there's still an | ||
443 | * electrical connection. If so, we really need to communicate | ||
444 | * this to the MMC core since there won't be any more | ||
445 | * interrupts as the card is completely removed. Otherwise, | ||
446 | * the MMC core might believe the card is still there even | ||
447 | * though the card was just removed very slowly. | ||
448 | */ | ||
449 | if (!host->present) { | ||
450 | mrq->cmd->error = -ENOMEDIUM; | ||
451 | mmc_request_done(mmc, mrq); | ||
452 | return; | ||
453 | } | ||
454 | 533 | ||
534 | mrq = slot->mrq; | ||
535 | host->cur_slot = slot; | ||
455 | host->mrq = mrq; | 536 | host->mrq = mrq; |
537 | |||
456 | host->pending_events = 0; | 538 | host->pending_events = 0; |
457 | host->completed_events = 0; | 539 | host->completed_events = 0; |
458 | host->state = STATE_SENDING_CMD; | ||
459 | 540 | ||
460 | /* We don't support multiple blocks of weird lengths. */ | 541 | if (host->need_reset) { |
542 | mci_writel(host, CR, MCI_CR_SWRST); | ||
543 | mci_writel(host, CR, MCI_CR_MCIEN); | ||
544 | mci_writel(host, MR, host->mode_reg); | ||
545 | host->need_reset = false; | ||
546 | } | ||
547 | mci_writel(host, SDCR, slot->sdc_reg); | ||
548 | |||
549 | iflags = mci_readl(host, IMR); | ||
550 | if (iflags) | ||
551 | dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", | ||
552 | iflags); | ||
553 | |||
554 | if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { | ||
555 | /* Send init sequence (74 clock cycles) */ | ||
556 | mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); | ||
557 | while (!(mci_readl(host, SR) & MCI_CMDRDY)) | ||
558 | cpu_relax(); | ||
559 | } | ||
461 | data = mrq->data; | 560 | data = mrq->data; |
462 | if (data) { | 561 | if (data) { |
463 | if (data->blocks > 1 && data->blksz & 3) | 562 | atmci_set_timeout(host, slot, data); |
464 | goto fail; | ||
465 | atmci_set_timeout(host, data); | ||
466 | 563 | ||
467 | /* Must set block count/size before sending command */ | 564 | /* Must set block count/size before sending command */ |
468 | mci_writel(host, BLKR, MCI_BCNT(data->blocks) | 565 | mci_writel(host, BLKR, MCI_BCNT(data->blocks) |
469 | | MCI_BLKLEN(data->blksz)); | 566 | | MCI_BLKLEN(data->blksz)); |
567 | dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n", | ||
568 | MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); | ||
470 | } | 569 | } |
471 | 570 | ||
472 | iflags = MCI_CMDRDY; | 571 | iflags = MCI_CMDRDY; |
473 | cmd = mrq->cmd; | 572 | cmd = mrq->cmd; |
474 | cmdflags = atmci_prepare_command(mmc, cmd); | 573 | cmdflags = atmci_prepare_command(slot->mmc, cmd); |
475 | atmci_start_command(host, cmd, cmdflags); | 574 | atmci_start_command(host, cmd, cmdflags); |
476 | 575 | ||
477 | if (data) | 576 | if (data) |
478 | iflags |= atmci_submit_data(mmc, data); | 577 | iflags |= atmci_submit_data(host, data); |
479 | 578 | ||
480 | if (mrq->stop) { | 579 | if (mrq->stop) { |
481 | host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop); | 580 | host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); |
482 | host->stop_cmdr |= MCI_CMDR_STOP_XFER; | 581 | host->stop_cmdr |= MCI_CMDR_STOP_XFER; |
483 | if (!(data->flags & MMC_DATA_WRITE)) | 582 | if (!(data->flags & MMC_DATA_WRITE)) |
484 | host->stop_cmdr |= MCI_CMDR_TRDIR_READ; | 583 | host->stop_cmdr |= MCI_CMDR_TRDIR_READ; |
@@ -495,65 +594,156 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) | |||
495 | * prepared yet.) | 594 | * prepared yet.) |
496 | */ | 595 | */ |
497 | mci_writel(host, IER, iflags); | 596 | mci_writel(host, IER, iflags); |
597 | } | ||
498 | 598 | ||
499 | return; | 599 | static void atmci_queue_request(struct atmel_mci *host, |
600 | struct atmel_mci_slot *slot, struct mmc_request *mrq) | ||
601 | { | ||
602 | dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n", | ||
603 | host->state); | ||
604 | |||
605 | spin_lock_bh(&host->lock); | ||
606 | slot->mrq = mrq; | ||
607 | if (host->state == STATE_IDLE) { | ||
608 | host->state = STATE_SENDING_CMD; | ||
609 | atmci_start_request(host, slot); | ||
610 | } else { | ||
611 | list_add_tail(&slot->queue_node, &host->queue); | ||
612 | } | ||
613 | spin_unlock_bh(&host->lock); | ||
614 | } | ||
500 | 615 | ||
501 | fail: | 616 | static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) |
502 | host->mrq = NULL; | 617 | { |
503 | mrq->cmd->error = -EINVAL; | 618 | struct atmel_mci_slot *slot = mmc_priv(mmc); |
504 | mmc_request_done(mmc, mrq); | 619 | struct atmel_mci *host = slot->host; |
620 | struct mmc_data *data; | ||
621 | |||
622 | WARN_ON(slot->mrq); | ||
623 | |||
624 | /* | ||
625 | * We may "know" the card is gone even though there's still an | ||
626 | * electrical connection. If so, we really need to communicate | ||
627 | * this to the MMC core since there won't be any more | ||
628 | * interrupts as the card is completely removed. Otherwise, | ||
629 | * the MMC core might believe the card is still there even | ||
630 | * though the card was just removed very slowly. | ||
631 | */ | ||
632 | if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) { | ||
633 | mrq->cmd->error = -ENOMEDIUM; | ||
634 | mmc_request_done(mmc, mrq); | ||
635 | return; | ||
636 | } | ||
637 | |||
638 | /* We don't support multiple blocks of weird lengths. */ | ||
639 | data = mrq->data; | ||
640 | if (data && data->blocks > 1 && data->blksz & 3) { | ||
641 | mrq->cmd->error = -EINVAL; | ||
642 | mmc_request_done(mmc, mrq); | ||
643 | } | ||
644 | |||
645 | atmci_queue_request(host, slot, mrq); | ||
505 | } | 646 | } |
506 | 647 | ||
507 | static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | 648 | static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
508 | { | 649 | { |
509 | struct atmel_mci *host = mmc_priv(mmc); | 650 | struct atmel_mci_slot *slot = mmc_priv(mmc); |
651 | struct atmel_mci *host = slot->host; | ||
652 | unsigned int i; | ||
510 | 653 | ||
511 | host->sdc_reg &= ~MCI_SDCBUS_MASK; | 654 | slot->sdc_reg &= ~MCI_SDCBUS_MASK; |
512 | switch (ios->bus_width) { | 655 | switch (ios->bus_width) { |
513 | case MMC_BUS_WIDTH_1: | 656 | case MMC_BUS_WIDTH_1: |
514 | host->sdc_reg |= MCI_SDCBUS_1BIT; | 657 | slot->sdc_reg |= MCI_SDCBUS_1BIT; |
515 | break; | 658 | break; |
516 | case MMC_BUS_WIDTH_4: | 659 | case MMC_BUS_WIDTH_4: |
517 | host->sdc_reg = MCI_SDCBUS_4BIT; | 660 | slot->sdc_reg = MCI_SDCBUS_4BIT; |
518 | break; | 661 | break; |
519 | } | 662 | } |
520 | 663 | ||
521 | if (ios->clock) { | 664 | if (ios->clock) { |
665 | unsigned int clock_min = ~0U; | ||
522 | u32 clkdiv; | 666 | u32 clkdiv; |
523 | 667 | ||
524 | if (!host->mode_reg) | 668 | spin_lock_bh(&host->lock); |
669 | if (!host->mode_reg) { | ||
525 | clk_enable(host->mck); | 670 | clk_enable(host->mck); |
671 | mci_writel(host, CR, MCI_CR_SWRST); | ||
672 | mci_writel(host, CR, MCI_CR_MCIEN); | ||
673 | } | ||
526 | 674 | ||
527 | /* Set clock rate */ | 675 | /* |
528 | clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1; | 676 | * Use mirror of ios->clock to prevent race with mmc |
677 | * core ios update when finding the minimum. | ||
678 | */ | ||
679 | slot->clock = ios->clock; | ||
680 | for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { | ||
681 | if (host->slot[i] && host->slot[i]->clock | ||
682 | && host->slot[i]->clock < clock_min) | ||
683 | clock_min = host->slot[i]->clock; | ||
684 | } | ||
685 | |||
686 | /* Calculate clock divider */ | ||
687 | clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; | ||
529 | if (clkdiv > 255) { | 688 | if (clkdiv > 255) { |
530 | dev_warn(&mmc->class_dev, | 689 | dev_warn(&mmc->class_dev, |
531 | "clock %u too slow; using %lu\n", | 690 | "clock %u too slow; using %lu\n", |
532 | ios->clock, host->bus_hz / (2 * 256)); | 691 | clock_min, host->bus_hz / (2 * 256)); |
533 | clkdiv = 255; | 692 | clkdiv = 255; |
534 | } | 693 | } |
535 | 694 | ||
695 | /* | ||
696 | * WRPROOF and RDPROOF prevent overruns/underruns by | ||
697 | * stopping the clock when the FIFO is full/empty. | ||
698 | * This state is not expected to last for long. | ||
699 | */ | ||
536 | host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF | 700 | host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF |
537 | | MCI_MR_RDPROOF; | 701 | | MCI_MR_RDPROOF; |
538 | 702 | ||
539 | mci_writel(host, CR, MCI_CR_MCIEN); | 703 | if (list_empty(&host->queue)) |
540 | mci_writel(host, MR, host->mode_reg); | 704 | mci_writel(host, MR, host->mode_reg); |
541 | mci_writel(host, SDCR, host->sdc_reg); | 705 | else |
706 | host->need_clock_update = true; | ||
707 | |||
708 | spin_unlock_bh(&host->lock); | ||
542 | } else { | 709 | } else { |
543 | mci_writel(host, CR, MCI_CR_MCIDIS); | 710 | bool any_slot_active = false; |
544 | if (host->mode_reg) { | 711 | |
545 | mci_readl(host, MR); | 712 | spin_lock_bh(&host->lock); |
546 | clk_disable(host->mck); | 713 | slot->clock = 0; |
714 | for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { | ||
715 | if (host->slot[i] && host->slot[i]->clock) { | ||
716 | any_slot_active = true; | ||
717 | break; | ||
718 | } | ||
547 | } | 719 | } |
548 | host->mode_reg = 0; | 720 | if (!any_slot_active) { |
721 | mci_writel(host, CR, MCI_CR_MCIDIS); | ||
722 | if (host->mode_reg) { | ||
723 | mci_readl(host, MR); | ||
724 | clk_disable(host->mck); | ||
725 | } | ||
726 | host->mode_reg = 0; | ||
727 | } | ||
728 | spin_unlock_bh(&host->lock); | ||
549 | } | 729 | } |
550 | 730 | ||
551 | switch (ios->power_mode) { | 731 | switch (ios->power_mode) { |
732 | case MMC_POWER_UP: | ||
733 | set_bit(ATMCI_CARD_NEED_INIT, &slot->flags); | ||
734 | break; | ||
552 | default: | 735 | default: |
553 | /* | 736 | /* |
554 | * TODO: None of the currently available AVR32-based | 737 | * TODO: None of the currently available AVR32-based |
555 | * boards allow MMC power to be turned off. Implement | 738 | * boards allow MMC power to be turned off. Implement |
556 | * power control when this can be tested properly. | 739 | * power control when this can be tested properly. |
740 | * | ||
741 | * We also need to hook this into the clock management | ||
742 | * somehow so that newly inserted cards aren't | ||
743 | * subjected to a fast clock before we have a chance | ||
744 | * to figure out what the maximum rate is. Currently, | ||
745 | * there's no way to avoid this, and there never will | ||
746 | * be for boards that don't support power control. | ||
557 | */ | 747 | */ |
558 | break; | 748 | break; |
559 | } | 749 | } |
@@ -561,28 +751,77 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | |||
561 | 751 | ||
562 | static int atmci_get_ro(struct mmc_host *mmc) | 752 | static int atmci_get_ro(struct mmc_host *mmc) |
563 | { | 753 | { |
564 | int read_only = 0; | 754 | int read_only = -ENOSYS; |
565 | struct atmel_mci *host = mmc_priv(mmc); | 755 | struct atmel_mci_slot *slot = mmc_priv(mmc); |
566 | 756 | ||
567 | if (gpio_is_valid(host->wp_pin)) { | 757 | if (gpio_is_valid(slot->wp_pin)) { |
568 | read_only = gpio_get_value(host->wp_pin); | 758 | read_only = gpio_get_value(slot->wp_pin); |
569 | dev_dbg(&mmc->class_dev, "card is %s\n", | 759 | dev_dbg(&mmc->class_dev, "card is %s\n", |
570 | read_only ? "read-only" : "read-write"); | 760 | read_only ? "read-only" : "read-write"); |
571 | } else { | ||
572 | dev_dbg(&mmc->class_dev, | ||
573 | "no pin for checking read-only switch." | ||
574 | " Assuming write-enable.\n"); | ||
575 | } | 761 | } |
576 | 762 | ||
577 | return read_only; | 763 | return read_only; |
578 | } | 764 | } |
579 | 765 | ||
580 | static struct mmc_host_ops atmci_ops = { | 766 | static int atmci_get_cd(struct mmc_host *mmc) |
767 | { | ||
768 | int present = -ENOSYS; | ||
769 | struct atmel_mci_slot *slot = mmc_priv(mmc); | ||
770 | |||
771 | if (gpio_is_valid(slot->detect_pin)) { | ||
772 | present = !gpio_get_value(slot->detect_pin); | ||
773 | dev_dbg(&mmc->class_dev, "card is %spresent\n", | ||
774 | present ? "" : "not "); | ||
775 | } | ||
776 | |||
777 | return present; | ||
778 | } | ||
779 | |||
780 | static const struct mmc_host_ops atmci_ops = { | ||
581 | .request = atmci_request, | 781 | .request = atmci_request, |
582 | .set_ios = atmci_set_ios, | 782 | .set_ios = atmci_set_ios, |
583 | .get_ro = atmci_get_ro, | 783 | .get_ro = atmci_get_ro, |
784 | .get_cd = atmci_get_cd, | ||
584 | }; | 785 | }; |
585 | 786 | ||
787 | /* Called with host->lock held */ | ||
788 | static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) | ||
789 | __releases(&host->lock) | ||
790 | __acquires(&host->lock) | ||
791 | { | ||
792 | struct atmel_mci_slot *slot = NULL; | ||
793 | struct mmc_host *prev_mmc = host->cur_slot->mmc; | ||
794 | |||
795 | WARN_ON(host->cmd || host->data); | ||
796 | |||
797 | /* | ||
798 | * Update the MMC clock rate if necessary. This may be | ||
799 | * necessary if set_ios() is called when a different slot is | ||
800 | * busy transfering data. | ||
801 | */ | ||
802 | if (host->need_clock_update) | ||
803 | mci_writel(host, MR, host->mode_reg); | ||
804 | |||
805 | host->cur_slot->mrq = NULL; | ||
806 | host->mrq = NULL; | ||
807 | if (!list_empty(&host->queue)) { | ||
808 | slot = list_entry(host->queue.next, | ||
809 | struct atmel_mci_slot, queue_node); | ||
810 | list_del(&slot->queue_node); | ||
811 | dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n", | ||
812 | mmc_hostname(slot->mmc)); | ||
813 | host->state = STATE_SENDING_CMD; | ||
814 | atmci_start_request(host, slot); | ||
815 | } else { | ||
816 | dev_vdbg(&host->pdev->dev, "list empty\n"); | ||
817 | host->state = STATE_IDLE; | ||
818 | } | ||
819 | |||
820 | spin_unlock(&host->lock); | ||
821 | mmc_request_done(prev_mmc, mrq); | ||
822 | spin_lock(&host->lock); | ||
823 | } | ||
824 | |||
586 | static void atmci_command_complete(struct atmel_mci *host, | 825 | static void atmci_command_complete(struct atmel_mci *host, |
587 | struct mmc_command *cmd) | 826 | struct mmc_command *cmd) |
588 | { | 827 | { |
@@ -604,7 +843,7 @@ static void atmci_command_complete(struct atmel_mci *host, | |||
604 | cmd->error = 0; | 843 | cmd->error = 0; |
605 | 844 | ||
606 | if (cmd->error) { | 845 | if (cmd->error) { |
607 | dev_dbg(&host->mmc->class_dev, | 846 | dev_dbg(&host->pdev->dev, |
608 | "command error: status=0x%08x\n", status); | 847 | "command error: status=0x%08x\n", status); |
609 | 848 | ||
610 | if (cmd->data) { | 849 | if (cmd->data) { |
@@ -618,81 +857,102 @@ static void atmci_command_complete(struct atmel_mci *host, | |||
618 | 857 | ||
619 | static void atmci_detect_change(unsigned long data) | 858 | static void atmci_detect_change(unsigned long data) |
620 | { | 859 | { |
621 | struct atmel_mci *host = (struct atmel_mci *)data; | 860 | struct atmel_mci_slot *slot = (struct atmel_mci_slot *)data; |
622 | struct mmc_request *mrq = host->mrq; | 861 | bool present; |
623 | int present; | 862 | bool present_old; |
624 | 863 | ||
625 | /* | 864 | /* |
626 | * atmci_remove() sets detect_pin to -1 before freeing the | 865 | * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before |
627 | * interrupt. We must not re-enable the interrupt if it has | 866 | * freeing the interrupt. We must not re-enable the interrupt |
628 | * been freed. | 867 | * if it has been freed, and if we're shutting down, it |
868 | * doesn't really matter whether the card is present or not. | ||
629 | */ | 869 | */ |
630 | smp_rmb(); | 870 | smp_rmb(); |
631 | if (!gpio_is_valid(host->detect_pin)) | 871 | if (test_bit(ATMCI_SHUTDOWN, &slot->flags)) |
632 | return; | 872 | return; |
633 | 873 | ||
634 | enable_irq(gpio_to_irq(host->detect_pin)); | 874 | enable_irq(gpio_to_irq(slot->detect_pin)); |
635 | present = !gpio_get_value(host->detect_pin); | 875 | present = !gpio_get_value(slot->detect_pin); |
876 | present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags); | ||
636 | 877 | ||
637 | dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n", | 878 | dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n", |
638 | present, host->present); | 879 | present, present_old); |
639 | 880 | ||
640 | if (present != host->present) { | 881 | if (present != present_old) { |
641 | dev_dbg(&host->mmc->class_dev, "card %s\n", | 882 | struct atmel_mci *host = slot->host; |
883 | struct mmc_request *mrq; | ||
884 | |||
885 | dev_dbg(&slot->mmc->class_dev, "card %s\n", | ||
642 | present ? "inserted" : "removed"); | 886 | present ? "inserted" : "removed"); |
643 | host->present = present; | ||
644 | 887 | ||
645 | /* Reset controller if card is gone */ | 888 | spin_lock(&host->lock); |
646 | if (!present) { | 889 | |
647 | mci_writel(host, CR, MCI_CR_SWRST); | 890 | if (!present) |
648 | mci_writel(host, IDR, ~0UL); | 891 | clear_bit(ATMCI_CARD_PRESENT, &slot->flags); |
649 | mci_writel(host, CR, MCI_CR_MCIEN); | 892 | else |
650 | } | 893 | set_bit(ATMCI_CARD_PRESENT, &slot->flags); |
651 | 894 | ||
652 | /* Clean up queue if present */ | 895 | /* Clean up queue if present */ |
896 | mrq = slot->mrq; | ||
653 | if (mrq) { | 897 | if (mrq) { |
654 | /* | 898 | if (mrq == host->mrq) { |
655 | * Reset controller to terminate any ongoing | 899 | /* |
656 | * commands or data transfers. | 900 | * Reset controller to terminate any ongoing |
657 | */ | 901 | * commands or data transfers. |
658 | mci_writel(host, CR, MCI_CR_SWRST); | 902 | */ |
659 | mci_readl(host, SR); | 903 | mci_writel(host, CR, MCI_CR_SWRST); |
660 | 904 | mci_writel(host, CR, MCI_CR_MCIEN); | |
661 | host->data = NULL; | 905 | mci_writel(host, MR, host->mode_reg); |
662 | host->cmd = NULL; | 906 | |
663 | 907 | host->data = NULL; | |
664 | switch (host->state) { | 908 | host->cmd = NULL; |
665 | case STATE_SENDING_CMD: | 909 | |
666 | mrq->cmd->error = -ENOMEDIUM; | 910 | switch (host->state) { |
667 | if (!mrq->data) | 911 | case STATE_IDLE: |
668 | break; | 912 | break; |
669 | /* fall through */ | 913 | case STATE_SENDING_CMD: |
670 | case STATE_SENDING_DATA: | 914 | mrq->cmd->error = -ENOMEDIUM; |
671 | mrq->data->error = -ENOMEDIUM; | 915 | if (!mrq->data) |
672 | break; | 916 | break; |
673 | case STATE_DATA_BUSY: | 917 | /* fall through */ |
674 | case STATE_DATA_ERROR: | 918 | case STATE_SENDING_DATA: |
675 | if (mrq->data->error == -EINPROGRESS) | ||
676 | mrq->data->error = -ENOMEDIUM; | 919 | mrq->data->error = -ENOMEDIUM; |
677 | if (!mrq->stop) | ||
678 | break; | 920 | break; |
679 | /* fall through */ | 921 | case STATE_DATA_BUSY: |
680 | case STATE_SENDING_STOP: | 922 | case STATE_DATA_ERROR: |
681 | mrq->stop->error = -ENOMEDIUM; | 923 | if (mrq->data->error == -EINPROGRESS) |
682 | break; | 924 | mrq->data->error = -ENOMEDIUM; |
683 | } | 925 | if (!mrq->stop) |
926 | break; | ||
927 | /* fall through */ | ||
928 | case STATE_SENDING_STOP: | ||
929 | mrq->stop->error = -ENOMEDIUM; | ||
930 | break; | ||
931 | } | ||
684 | 932 | ||
685 | atmci_request_end(host->mmc, mrq); | 933 | atmci_request_end(host, mrq); |
934 | } else { | ||
935 | list_del(&slot->queue_node); | ||
936 | mrq->cmd->error = -ENOMEDIUM; | ||
937 | if (mrq->data) | ||
938 | mrq->data->error = -ENOMEDIUM; | ||
939 | if (mrq->stop) | ||
940 | mrq->stop->error = -ENOMEDIUM; | ||
941 | |||
942 | spin_unlock(&host->lock); | ||
943 | mmc_request_done(slot->mmc, mrq); | ||
944 | spin_lock(&host->lock); | ||
945 | } | ||
686 | } | 946 | } |
947 | spin_unlock(&host->lock); | ||
687 | 948 | ||
688 | mmc_detect_change(host->mmc, 0); | 949 | mmc_detect_change(slot->mmc, 0); |
689 | } | 950 | } |
690 | } | 951 | } |
691 | 952 | ||
692 | static void atmci_tasklet_func(unsigned long priv) | 953 | static void atmci_tasklet_func(unsigned long priv) |
693 | { | 954 | { |
694 | struct mmc_host *mmc = (struct mmc_host *)priv; | 955 | struct atmel_mci *host = (struct atmel_mci *)priv; |
695 | struct atmel_mci *host = mmc_priv(mmc); | ||
696 | struct mmc_request *mrq = host->mrq; | 956 | struct mmc_request *mrq = host->mrq; |
697 | struct mmc_data *data = host->data; | 957 | struct mmc_data *data = host->data; |
698 | struct mmc_command *cmd = host->cmd; | 958 | struct mmc_command *cmd = host->cmd; |
@@ -700,9 +960,11 @@ static void atmci_tasklet_func(unsigned long priv) | |||
700 | enum atmel_mci_state prev_state; | 960 | enum atmel_mci_state prev_state; |
701 | u32 status; | 961 | u32 status; |
702 | 962 | ||
963 | spin_lock(&host->lock); | ||
964 | |||
703 | state = host->state; | 965 | state = host->state; |
704 | 966 | ||
705 | dev_vdbg(&mmc->class_dev, | 967 | dev_vdbg(&host->pdev->dev, |
706 | "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", | 968 | "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", |
707 | state, host->pending_events, host->completed_events, | 969 | state, host->pending_events, host->completed_events, |
708 | mci_readl(host, IMR)); | 970 | mci_readl(host, IMR)); |
@@ -711,6 +973,9 @@ static void atmci_tasklet_func(unsigned long priv) | |||
711 | prev_state = state; | 973 | prev_state = state; |
712 | 974 | ||
713 | switch (state) { | 975 | switch (state) { |
976 | case STATE_IDLE: | ||
977 | break; | ||
978 | |||
714 | case STATE_SENDING_CMD: | 979 | case STATE_SENDING_CMD: |
715 | if (!atmci_test_and_clear_pending(host, | 980 | if (!atmci_test_and_clear_pending(host, |
716 | EVENT_CMD_COMPLETE)) | 981 | EVENT_CMD_COMPLETE)) |
@@ -720,8 +985,8 @@ static void atmci_tasklet_func(unsigned long priv) | |||
720 | atmci_set_completed(host, EVENT_CMD_COMPLETE); | 985 | atmci_set_completed(host, EVENT_CMD_COMPLETE); |
721 | atmci_command_complete(host, mrq->cmd); | 986 | atmci_command_complete(host, mrq->cmd); |
722 | if (!mrq->data || cmd->error) { | 987 | if (!mrq->data || cmd->error) { |
723 | atmci_request_end(mmc, host->mrq); | 988 | atmci_request_end(host, host->mrq); |
724 | break; | 989 | goto unlock; |
725 | } | 990 | } |
726 | 991 | ||
727 | prev_state = state = STATE_SENDING_DATA; | 992 | prev_state = state = STATE_SENDING_DATA; |
@@ -731,7 +996,7 @@ static void atmci_tasklet_func(unsigned long priv) | |||
731 | if (atmci_test_and_clear_pending(host, | 996 | if (atmci_test_and_clear_pending(host, |
732 | EVENT_DATA_ERROR)) { | 997 | EVENT_DATA_ERROR)) { |
733 | if (data->stop) | 998 | if (data->stop) |
734 | send_stop_cmd(host->mmc, data); | 999 | send_stop_cmd(host, data); |
735 | state = STATE_DATA_ERROR; | 1000 | state = STATE_DATA_ERROR; |
736 | break; | 1001 | break; |
737 | } | 1002 | } |
@@ -754,15 +1019,15 @@ static void atmci_tasklet_func(unsigned long priv) | |||
754 | status = host->data_status; | 1019 | status = host->data_status; |
755 | if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { | 1020 | if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { |
756 | if (status & MCI_DTOE) { | 1021 | if (status & MCI_DTOE) { |
757 | dev_dbg(&mmc->class_dev, | 1022 | dev_dbg(&host->pdev->dev, |
758 | "data timeout error\n"); | 1023 | "data timeout error\n"); |
759 | data->error = -ETIMEDOUT; | 1024 | data->error = -ETIMEDOUT; |
760 | } else if (status & MCI_DCRCE) { | 1025 | } else if (status & MCI_DCRCE) { |
761 | dev_dbg(&mmc->class_dev, | 1026 | dev_dbg(&host->pdev->dev, |
762 | "data CRC error\n"); | 1027 | "data CRC error\n"); |
763 | data->error = -EILSEQ; | 1028 | data->error = -EILSEQ; |
764 | } else { | 1029 | } else { |
765 | dev_dbg(&mmc->class_dev, | 1030 | dev_dbg(&host->pdev->dev, |
766 | "data FIFO error (status=%08x)\n", | 1031 | "data FIFO error (status=%08x)\n", |
767 | status); | 1032 | status); |
768 | data->error = -EIO; | 1033 | data->error = -EIO; |
@@ -773,14 +1038,13 @@ static void atmci_tasklet_func(unsigned long priv) | |||
773 | } | 1038 | } |
774 | 1039 | ||
775 | if (!data->stop) { | 1040 | if (!data->stop) { |
776 | atmci_request_end(mmc, host->mrq); | 1041 | atmci_request_end(host, host->mrq); |
777 | prev_state = state; | 1042 | goto unlock; |
778 | break; | ||
779 | } | 1043 | } |
780 | 1044 | ||
781 | prev_state = state = STATE_SENDING_STOP; | 1045 | prev_state = state = STATE_SENDING_STOP; |
782 | if (!data->error) | 1046 | if (!data->error) |
783 | send_stop_cmd(host->mmc, data); | 1047 | send_stop_cmd(host, data); |
784 | /* fall through */ | 1048 | /* fall through */ |
785 | 1049 | ||
786 | case STATE_SENDING_STOP: | 1050 | case STATE_SENDING_STOP: |
@@ -790,9 +1054,8 @@ static void atmci_tasklet_func(unsigned long priv) | |||
790 | 1054 | ||
791 | host->cmd = NULL; | 1055 | host->cmd = NULL; |
792 | atmci_command_complete(host, mrq->stop); | 1056 | atmci_command_complete(host, mrq->stop); |
793 | atmci_request_end(mmc, host->mrq); | 1057 | atmci_request_end(host, host->mrq); |
794 | prev_state = state; | 1058 | goto unlock; |
795 | break; | ||
796 | 1059 | ||
797 | case STATE_DATA_ERROR: | 1060 | case STATE_DATA_ERROR: |
798 | if (!atmci_test_and_clear_pending(host, | 1061 | if (!atmci_test_and_clear_pending(host, |
@@ -805,6 +1068,9 @@ static void atmci_tasklet_func(unsigned long priv) | |||
805 | } while (state != prev_state); | 1068 | } while (state != prev_state); |
806 | 1069 | ||
807 | host->state = state; | 1070 | host->state = state; |
1071 | |||
1072 | unlock: | ||
1073 | spin_unlock(&host->lock); | ||
808 | } | 1074 | } |
809 | 1075 | ||
810 | static void atmci_read_data_pio(struct atmel_mci *host) | 1076 | static void atmci_read_data_pio(struct atmel_mci *host) |
@@ -854,9 +1120,11 @@ static void atmci_read_data_pio(struct atmel_mci *host) | |||
854 | mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY | 1120 | mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY |
855 | | ATMCI_DATA_ERROR_FLAGS)); | 1121 | | ATMCI_DATA_ERROR_FLAGS)); |
856 | host->data_status = status; | 1122 | host->data_status = status; |
1123 | data->bytes_xfered += nbytes; | ||
1124 | smp_wmb(); | ||
857 | atmci_set_pending(host, EVENT_DATA_ERROR); | 1125 | atmci_set_pending(host, EVENT_DATA_ERROR); |
858 | tasklet_schedule(&host->tasklet); | 1126 | tasklet_schedule(&host->tasklet); |
859 | break; | 1127 | return; |
860 | } | 1128 | } |
861 | } while (status & MCI_RXRDY); | 1129 | } while (status & MCI_RXRDY); |
862 | 1130 | ||
@@ -869,6 +1137,7 @@ done: | |||
869 | mci_writel(host, IDR, MCI_RXRDY); | 1137 | mci_writel(host, IDR, MCI_RXRDY); |
870 | mci_writel(host, IER, MCI_NOTBUSY); | 1138 | mci_writel(host, IER, MCI_NOTBUSY); |
871 | data->bytes_xfered += nbytes; | 1139 | data->bytes_xfered += nbytes; |
1140 | smp_wmb(); | ||
872 | atmci_set_pending(host, EVENT_XFER_COMPLETE); | 1141 | atmci_set_pending(host, EVENT_XFER_COMPLETE); |
873 | } | 1142 | } |
874 | 1143 | ||
@@ -922,9 +1191,11 @@ static void atmci_write_data_pio(struct atmel_mci *host) | |||
922 | mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY | 1191 | mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY |
923 | | ATMCI_DATA_ERROR_FLAGS)); | 1192 | | ATMCI_DATA_ERROR_FLAGS)); |
924 | host->data_status = status; | 1193 | host->data_status = status; |
1194 | data->bytes_xfered += nbytes; | ||
1195 | smp_wmb(); | ||
925 | atmci_set_pending(host, EVENT_DATA_ERROR); | 1196 | atmci_set_pending(host, EVENT_DATA_ERROR); |
926 | tasklet_schedule(&host->tasklet); | 1197 | tasklet_schedule(&host->tasklet); |
927 | break; | 1198 | return; |
928 | } | 1199 | } |
929 | } while (status & MCI_TXRDY); | 1200 | } while (status & MCI_TXRDY); |
930 | 1201 | ||
@@ -937,29 +1208,26 @@ done: | |||
937 | mci_writel(host, IDR, MCI_TXRDY); | 1208 | mci_writel(host, IDR, MCI_TXRDY); |
938 | mci_writel(host, IER, MCI_NOTBUSY); | 1209 | mci_writel(host, IER, MCI_NOTBUSY); |
939 | data->bytes_xfered += nbytes; | 1210 | data->bytes_xfered += nbytes; |
1211 | smp_wmb(); | ||
940 | atmci_set_pending(host, EVENT_XFER_COMPLETE); | 1212 | atmci_set_pending(host, EVENT_XFER_COMPLETE); |
941 | } | 1213 | } |
942 | 1214 | ||
943 | static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) | 1215 | static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status) |
944 | { | 1216 | { |
945 | struct atmel_mci *host = mmc_priv(mmc); | ||
946 | |||
947 | mci_writel(host, IDR, MCI_CMDRDY); | 1217 | mci_writel(host, IDR, MCI_CMDRDY); |
948 | 1218 | ||
949 | host->cmd_status = status; | 1219 | host->cmd_status = status; |
1220 | smp_wmb(); | ||
950 | atmci_set_pending(host, EVENT_CMD_COMPLETE); | 1221 | atmci_set_pending(host, EVENT_CMD_COMPLETE); |
951 | tasklet_schedule(&host->tasklet); | 1222 | tasklet_schedule(&host->tasklet); |
952 | } | 1223 | } |
953 | 1224 | ||
954 | static irqreturn_t atmci_interrupt(int irq, void *dev_id) | 1225 | static irqreturn_t atmci_interrupt(int irq, void *dev_id) |
955 | { | 1226 | { |
956 | struct mmc_host *mmc = dev_id; | 1227 | struct atmel_mci *host = dev_id; |
957 | struct atmel_mci *host = mmc_priv(mmc); | ||
958 | u32 status, mask, pending; | 1228 | u32 status, mask, pending; |
959 | unsigned int pass_count = 0; | 1229 | unsigned int pass_count = 0; |
960 | 1230 | ||
961 | spin_lock(&mmc->lock); | ||
962 | |||
963 | do { | 1231 | do { |
964 | status = mci_readl(host, SR); | 1232 | status = mci_readl(host, SR); |
965 | mask = mci_readl(host, IMR); | 1233 | mask = mci_readl(host, IMR); |
@@ -971,7 +1239,9 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) | |||
971 | mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS | 1239 | mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS |
972 | | MCI_RXRDY | MCI_TXRDY); | 1240 | | MCI_RXRDY | MCI_TXRDY); |
973 | pending &= mci_readl(host, IMR); | 1241 | pending &= mci_readl(host, IMR); |
1242 | |||
974 | host->data_status = status; | 1243 | host->data_status = status; |
1244 | smp_wmb(); | ||
975 | atmci_set_pending(host, EVENT_DATA_ERROR); | 1245 | atmci_set_pending(host, EVENT_DATA_ERROR); |
976 | tasklet_schedule(&host->tasklet); | 1246 | tasklet_schedule(&host->tasklet); |
977 | } | 1247 | } |
@@ -979,6 +1249,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) | |||
979 | mci_writel(host, IDR, | 1249 | mci_writel(host, IDR, |
980 | ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); | 1250 | ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); |
981 | host->data_status = status; | 1251 | host->data_status = status; |
1252 | smp_wmb(); | ||
982 | atmci_set_pending(host, EVENT_DATA_COMPLETE); | 1253 | atmci_set_pending(host, EVENT_DATA_COMPLETE); |
983 | tasklet_schedule(&host->tasklet); | 1254 | tasklet_schedule(&host->tasklet); |
984 | } | 1255 | } |
@@ -988,18 +1259,15 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) | |||
988 | atmci_write_data_pio(host); | 1259 | atmci_write_data_pio(host); |
989 | 1260 | ||
990 | if (pending & MCI_CMDRDY) | 1261 | if (pending & MCI_CMDRDY) |
991 | atmci_cmd_interrupt(mmc, status); | 1262 | atmci_cmd_interrupt(host, status); |
992 | } while (pass_count++ < 5); | 1263 | } while (pass_count++ < 5); |
993 | 1264 | ||
994 | spin_unlock(&mmc->lock); | ||
995 | |||
996 | return pass_count ? IRQ_HANDLED : IRQ_NONE; | 1265 | return pass_count ? IRQ_HANDLED : IRQ_NONE; |
997 | } | 1266 | } |
998 | 1267 | ||
999 | static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) | 1268 | static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) |
1000 | { | 1269 | { |
1001 | struct mmc_host *mmc = dev_id; | 1270 | struct atmel_mci_slot *slot = dev_id; |
1002 | struct atmel_mci *host = mmc_priv(mmc); | ||
1003 | 1271 | ||
1004 | /* | 1272 | /* |
1005 | * Disable interrupts until the pin has stabilized and check | 1273 | * Disable interrupts until the pin has stabilized and check |
@@ -1007,21 +1275,122 @@ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) | |||
1007 | * middle of the timer routine when this interrupt triggers. | 1275 | * middle of the timer routine when this interrupt triggers. |
1008 | */ | 1276 | */ |
1009 | disable_irq_nosync(irq); | 1277 | disable_irq_nosync(irq); |
1010 | mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20)); | 1278 | mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20)); |
1011 | 1279 | ||
1012 | return IRQ_HANDLED; | 1280 | return IRQ_HANDLED; |
1013 | } | 1281 | } |
1014 | 1282 | ||
1283 | static int __init atmci_init_slot(struct atmel_mci *host, | ||
1284 | struct mci_slot_pdata *slot_data, unsigned int id, | ||
1285 | u32 sdc_reg) | ||
1286 | { | ||
1287 | struct mmc_host *mmc; | ||
1288 | struct atmel_mci_slot *slot; | ||
1289 | |||
1290 | mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev); | ||
1291 | if (!mmc) | ||
1292 | return -ENOMEM; | ||
1293 | |||
1294 | slot = mmc_priv(mmc); | ||
1295 | slot->mmc = mmc; | ||
1296 | slot->host = host; | ||
1297 | slot->detect_pin = slot_data->detect_pin; | ||
1298 | slot->wp_pin = slot_data->wp_pin; | ||
1299 | slot->sdc_reg = sdc_reg; | ||
1300 | |||
1301 | mmc->ops = &atmci_ops; | ||
1302 | mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512); | ||
1303 | mmc->f_max = host->bus_hz / 2; | ||
1304 | mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; | ||
1305 | if (slot_data->bus_width >= 4) | ||
1306 | mmc->caps |= MMC_CAP_4_BIT_DATA; | ||
1307 | |||
1308 | mmc->max_hw_segs = 64; | ||
1309 | mmc->max_phys_segs = 64; | ||
1310 | mmc->max_req_size = 32768 * 512; | ||
1311 | mmc->max_blk_size = 32768; | ||
1312 | mmc->max_blk_count = 512; | ||
1313 | |||
1314 | /* Assume card is present initially */ | ||
1315 | set_bit(ATMCI_CARD_PRESENT, &slot->flags); | ||
1316 | if (gpio_is_valid(slot->detect_pin)) { | ||
1317 | if (gpio_request(slot->detect_pin, "mmc_detect")) { | ||
1318 | dev_dbg(&mmc->class_dev, "no detect pin available\n"); | ||
1319 | slot->detect_pin = -EBUSY; | ||
1320 | } else if (gpio_get_value(slot->detect_pin)) { | ||
1321 | clear_bit(ATMCI_CARD_PRESENT, &slot->flags); | ||
1322 | } | ||
1323 | } | ||
1324 | |||
1325 | if (!gpio_is_valid(slot->detect_pin)) | ||
1326 | mmc->caps |= MMC_CAP_NEEDS_POLL; | ||
1327 | |||
1328 | if (gpio_is_valid(slot->wp_pin)) { | ||
1329 | if (gpio_request(slot->wp_pin, "mmc_wp")) { | ||
1330 | dev_dbg(&mmc->class_dev, "no WP pin available\n"); | ||
1331 | slot->wp_pin = -EBUSY; | ||
1332 | } | ||
1333 | } | ||
1334 | |||
1335 | host->slot[id] = slot; | ||
1336 | mmc_add_host(mmc); | ||
1337 | |||
1338 | if (gpio_is_valid(slot->detect_pin)) { | ||
1339 | int ret; | ||
1340 | |||
1341 | setup_timer(&slot->detect_timer, atmci_detect_change, | ||
1342 | (unsigned long)slot); | ||
1343 | |||
1344 | ret = request_irq(gpio_to_irq(slot->detect_pin), | ||
1345 | atmci_detect_interrupt, | ||
1346 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | ||
1347 | "mmc-detect", slot); | ||
1348 | if (ret) { | ||
1349 | dev_dbg(&mmc->class_dev, | ||
1350 | "could not request IRQ %d for detect pin\n", | ||
1351 | gpio_to_irq(slot->detect_pin)); | ||
1352 | gpio_free(slot->detect_pin); | ||
1353 | slot->detect_pin = -EBUSY; | ||
1354 | } | ||
1355 | } | ||
1356 | |||
1357 | atmci_init_debugfs(slot); | ||
1358 | |||
1359 | return 0; | ||
1360 | } | ||
1361 | |||
1362 | static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, | ||
1363 | unsigned int id) | ||
1364 | { | ||
1365 | /* Debugfs stuff is cleaned up by mmc core */ | ||
1366 | |||
1367 | set_bit(ATMCI_SHUTDOWN, &slot->flags); | ||
1368 | smp_wmb(); | ||
1369 | |||
1370 | mmc_remove_host(slot->mmc); | ||
1371 | |||
1372 | if (gpio_is_valid(slot->detect_pin)) { | ||
1373 | int pin = slot->detect_pin; | ||
1374 | |||
1375 | free_irq(gpio_to_irq(pin), slot); | ||
1376 | del_timer_sync(&slot->detect_timer); | ||
1377 | gpio_free(pin); | ||
1378 | } | ||
1379 | if (gpio_is_valid(slot->wp_pin)) | ||
1380 | gpio_free(slot->wp_pin); | ||
1381 | |||
1382 | slot->host->slot[id] = NULL; | ||
1383 | mmc_free_host(slot->mmc); | ||
1384 | } | ||
1385 | |||
1015 | static int __init atmci_probe(struct platform_device *pdev) | 1386 | static int __init atmci_probe(struct platform_device *pdev) |
1016 | { | 1387 | { |
1017 | struct mci_platform_data *pdata; | 1388 | struct mci_platform_data *pdata; |
1018 | struct mci_slot_pdata *slot; | 1389 | struct atmel_mci *host; |
1019 | struct atmel_mci *host; | 1390 | struct resource *regs; |
1020 | struct mmc_host *mmc; | 1391 | unsigned int nr_slots; |
1021 | struct resource *regs; | 1392 | int irq; |
1022 | u32 sdc_reg; | 1393 | int ret; |
1023 | int irq; | ||
1024 | int ret; | ||
1025 | 1394 | ||
1026 | regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 1395 | regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
1027 | if (!regs) | 1396 | if (!regs) |
@@ -1033,27 +1402,13 @@ static int __init atmci_probe(struct platform_device *pdev) | |||
1033 | if (irq < 0) | 1402 | if (irq < 0) |
1034 | return irq; | 1403 | return irq; |
1035 | 1404 | ||
1036 | /* TODO: Allow using several slots at once */ | 1405 | host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL); |
1037 | if (pdata->slot[0].bus_width) { | 1406 | if (!host) |
1038 | sdc_reg = MCI_SDCSEL_SLOT_A; | ||
1039 | slot = &pdata->slot[0]; | ||
1040 | } else if (pdata->slot[1].bus_width) { | ||
1041 | sdc_reg = MCI_SDCSEL_SLOT_B; | ||
1042 | slot = &pdata->slot[1]; | ||
1043 | } else { | ||
1044 | return -EINVAL; | ||
1045 | } | ||
1046 | |||
1047 | mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev); | ||
1048 | if (!mmc) | ||
1049 | return -ENOMEM; | 1407 | return -ENOMEM; |
1050 | 1408 | ||
1051 | host = mmc_priv(mmc); | ||
1052 | host->pdev = pdev; | 1409 | host->pdev = pdev; |
1053 | host->mmc = mmc; | 1410 | spin_lock_init(&host->lock); |
1054 | host->detect_pin = slot->detect_pin; | 1411 | INIT_LIST_HEAD(&host->queue); |
1055 | host->wp_pin = slot->wp_pin; | ||
1056 | host->sdc_reg = sdc_reg; | ||
1057 | 1412 | ||
1058 | host->mck = clk_get(&pdev->dev, "mci_clk"); | 1413 | host->mck = clk_get(&pdev->dev, "mci_clk"); |
1059 | if (IS_ERR(host->mck)) { | 1414 | if (IS_ERR(host->mck)) { |
@@ -1073,123 +1428,74 @@ static int __init atmci_probe(struct platform_device *pdev) | |||
1073 | 1428 | ||
1074 | host->mapbase = regs->start; | 1429 | host->mapbase = regs->start; |
1075 | 1430 | ||
1076 | mmc->ops = &atmci_ops; | 1431 | tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host); |
1077 | mmc->f_min = (host->bus_hz + 511) / 512; | ||
1078 | mmc->f_max = host->bus_hz / 2; | ||
1079 | mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; | ||
1080 | if (slot->bus_width >= 4) | ||
1081 | mmc->caps |= MMC_CAP_4_BIT_DATA; | ||
1082 | |||
1083 | mmc->max_hw_segs = 64; | ||
1084 | mmc->max_phys_segs = 64; | ||
1085 | mmc->max_req_size = 32768 * 512; | ||
1086 | mmc->max_blk_size = 32768; | ||
1087 | mmc->max_blk_count = 512; | ||
1088 | |||
1089 | tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc); | ||
1090 | 1432 | ||
1091 | ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc); | 1433 | ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, host); |
1092 | if (ret) | 1434 | if (ret) |
1093 | goto err_request_irq; | 1435 | goto err_request_irq; |
1094 | 1436 | ||
1095 | /* Assume card is present if we don't have a detect pin */ | ||
1096 | host->present = 1; | ||
1097 | if (gpio_is_valid(host->detect_pin)) { | ||
1098 | if (gpio_request(host->detect_pin, "mmc_detect")) { | ||
1099 | dev_dbg(&mmc->class_dev, "no detect pin available\n"); | ||
1100 | host->detect_pin = -1; | ||
1101 | } else { | ||
1102 | host->present = !gpio_get_value(host->detect_pin); | ||
1103 | } | ||
1104 | } | ||
1105 | |||
1106 | if (!gpio_is_valid(host->detect_pin)) | ||
1107 | mmc->caps |= MMC_CAP_NEEDS_POLL; | ||
1108 | |||
1109 | if (gpio_is_valid(host->wp_pin)) { | ||
1110 | if (gpio_request(host->wp_pin, "mmc_wp")) { | ||
1111 | dev_dbg(&mmc->class_dev, "no WP pin available\n"); | ||
1112 | host->wp_pin = -1; | ||
1113 | } | ||
1114 | } | ||
1115 | |||
1116 | platform_set_drvdata(pdev, host); | 1437 | platform_set_drvdata(pdev, host); |
1117 | 1438 | ||
1118 | mmc_add_host(mmc); | 1439 | /* We need at least one slot to succeed */ |
1119 | 1440 | nr_slots = 0; | |
1120 | if (gpio_is_valid(host->detect_pin)) { | 1441 | ret = -ENODEV; |
1121 | setup_timer(&host->detect_timer, atmci_detect_change, | 1442 | if (pdata->slot[0].bus_width) { |
1122 | (unsigned long)host); | 1443 | ret = atmci_init_slot(host, &pdata->slot[0], |
1123 | 1444 | MCI_SDCSEL_SLOT_A, 0); | |
1124 | ret = request_irq(gpio_to_irq(host->detect_pin), | 1445 | if (!ret) |
1125 | atmci_detect_interrupt, | 1446 | nr_slots++; |
1126 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | 1447 | } |
1127 | "mmc-detect", mmc); | 1448 | if (pdata->slot[1].bus_width) { |
1128 | if (ret) { | 1449 | ret = atmci_init_slot(host, &pdata->slot[1], |
1129 | dev_dbg(&mmc->class_dev, | 1450 | MCI_SDCSEL_SLOT_B, 1); |
1130 | "could not request IRQ %d for detect pin\n", | 1451 | if (!ret) |
1131 | gpio_to_irq(host->detect_pin)); | 1452 | nr_slots++; |
1132 | gpio_free(host->detect_pin); | ||
1133 | host->detect_pin = -1; | ||
1134 | } | ||
1135 | } | 1453 | } |
1136 | 1454 | ||
1137 | dev_info(&mmc->class_dev, | 1455 | if (!nr_slots) |
1138 | "Atmel MCI controller at 0x%08lx irq %d\n", | 1456 | goto err_init_slot; |
1139 | host->mapbase, irq); | ||
1140 | 1457 | ||
1141 | atmci_init_debugfs(host); | 1458 | dev_info(&pdev->dev, |
1459 | "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", | ||
1460 | host->mapbase, irq, nr_slots); | ||
1142 | 1461 | ||
1143 | return 0; | 1462 | return 0; |
1144 | 1463 | ||
1464 | err_init_slot: | ||
1465 | free_irq(irq, host); | ||
1145 | err_request_irq: | 1466 | err_request_irq: |
1146 | iounmap(host->regs); | 1467 | iounmap(host->regs); |
1147 | err_ioremap: | 1468 | err_ioremap: |
1148 | clk_put(host->mck); | 1469 | clk_put(host->mck); |
1149 | err_clk_get: | 1470 | err_clk_get: |
1150 | mmc_free_host(mmc); | 1471 | kfree(host); |
1151 | return ret; | 1472 | return ret; |
1152 | } | 1473 | } |
1153 | 1474 | ||
1154 | static int __exit atmci_remove(struct platform_device *pdev) | 1475 | static int __exit atmci_remove(struct platform_device *pdev) |
1155 | { | 1476 | { |
1156 | struct atmel_mci *host = platform_get_drvdata(pdev); | 1477 | struct atmel_mci *host = platform_get_drvdata(pdev); |
1478 | unsigned int i; | ||
1157 | 1479 | ||
1158 | platform_set_drvdata(pdev, NULL); | 1480 | platform_set_drvdata(pdev, NULL); |
1159 | 1481 | ||
1160 | if (host) { | 1482 | for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { |
1161 | /* Debugfs stuff is cleaned up by mmc core */ | 1483 | if (host->slot[i]) |
1162 | 1484 | atmci_cleanup_slot(host->slot[i], i); | |
1163 | if (gpio_is_valid(host->detect_pin)) { | 1485 | } |
1164 | int pin = host->detect_pin; | ||
1165 | |||
1166 | /* Make sure the timer doesn't enable the interrupt */ | ||
1167 | host->detect_pin = -1; | ||
1168 | smp_wmb(); | ||
1169 | |||
1170 | free_irq(gpio_to_irq(pin), host->mmc); | ||
1171 | del_timer_sync(&host->detect_timer); | ||
1172 | gpio_free(pin); | ||
1173 | } | ||
1174 | |||
1175 | mmc_remove_host(host->mmc); | ||
1176 | |||
1177 | clk_enable(host->mck); | ||
1178 | mci_writel(host, IDR, ~0UL); | ||
1179 | mci_writel(host, CR, MCI_CR_MCIDIS); | ||
1180 | mci_readl(host, SR); | ||
1181 | clk_disable(host->mck); | ||
1182 | 1486 | ||
1183 | if (gpio_is_valid(host->wp_pin)) | 1487 | clk_enable(host->mck); |
1184 | gpio_free(host->wp_pin); | 1488 | mci_writel(host, IDR, ~0UL); |
1489 | mci_writel(host, CR, MCI_CR_MCIDIS); | ||
1490 | mci_readl(host, SR); | ||
1491 | clk_disable(host->mck); | ||
1185 | 1492 | ||
1186 | free_irq(platform_get_irq(pdev, 0), host->mmc); | 1493 | free_irq(platform_get_irq(pdev, 0), host); |
1187 | iounmap(host->regs); | 1494 | iounmap(host->regs); |
1188 | 1495 | ||
1189 | clk_put(host->mck); | 1496 | clk_put(host->mck); |
1497 | kfree(host); | ||
1190 | 1498 | ||
1191 | mmc_free_host(host->mmc); | ||
1192 | } | ||
1193 | return 0; | 1499 | return 0; |
1194 | } | 1500 | } |
1195 | 1501 | ||