Merge branch 'x86/urgent' into x86/pat

Conflicts:
	arch/x86/mm/pageattr.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

182 files changed, 21001 insertions, 4607 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index a280ab3d0833..2735bde73475 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
 obj-$(CONFIG_PARIDE)            += block/paride/
 obj-$(CONFIG_TC)                += tc/
 obj-$(CONFIG_USB)               += usb/
+obj-$(CONFIG_USB_MUSB_HDRC)     += usb/musb/
 obj-$(CONFIG_PCI)               += usb/
 obj-$(CONFIG_USB_GADGET)        += usb/gadget/
 obj-$(CONFIG_SERIO)             += input/serio/
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index bb7c51f712bd..7d2edf143f16 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -563,9 +563,6 @@ EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device);
  */
 static int handle_eject_request(struct dock_station *ds, u32 event)
 {
-        if (!dock_present(ds))
-                return -ENODEV;
-
         if (dock_in_progress(ds))
                 return -EBUSY;
 
@@ -573,8 +570,16 @@ static int handle_eject_request(struct dock_station *ds, u32 event)
          * here we need to generate the undock
          * event prior to actually doing the undock
          * so that the device struct still exists.
+         * Also, even send the dock event if the
+         * device is not present anymore
          */
         dock_event(ds, event, UNDOCK_EVENT);
+
+        if (!dock_present(ds)) {
+                complete_undock(ds);
+                return -ENODEV;
+        }
+
         hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
         undock(ds);
         eject_dock(ds);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 5622aee996b2..13593f9f2197 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -110,6 +110,31 @@ static struct acpi_ec {
         u8 handlers_installed;
 } *boot_ec, *first_ec;
 
+/* 
+ * Some Asus system have exchanged ECDT data/command IO addresses.
+ */
+static int print_ecdt_error(const struct dmi_system_id *id)
+{
+        printk(KERN_NOTICE PREFIX "%s detected - "
+                "ECDT has exchanged control/data I/O address\n",
+                id->ident);
+        return 0;
+}
+
+static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
+        {
+        print_ecdt_error, "Asus L4R", {
+        DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
+        DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
+        DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
+        {
+        print_ecdt_error, "Asus M6R", {
+        DMI_MATCH(DMI_BIOS_VERSION, "0207"),
+        DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
+        DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
+        {},
+};
+
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
@@ -196,6 +221,8 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
                                 return 0;
                         msleep(1);
                 }
+                if (acpi_ec_check_status(ec,event))
+                        return 0;
         }
         pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
                 acpi_ec_read_status(ec),
@@ -911,6 +938,15 @@ int __init acpi_ec_ecdt_probe(void)
                 pr_info(PREFIX "EC description table is found, configuring boot EC\n");
                 boot_ec->command_addr = ecdt_ptr->control.address;
                 boot_ec->data_addr = ecdt_ptr->data.address;
+                if (dmi_check_system(ec_dmi_table)) {
+                        /*
+                         * If the board falls into ec_dmi_table, it means
+                         * that ECDT table gives the incorrect command/status
+                         * & data I/O address. Just fix it.
+                         */
+                        boot_ec->data_addr = ecdt_ptr->control.address;
+                        boot_ec->command_addr = ecdt_ptr->data.address;
+                }
                 boot_ec->gpe = ecdt_ptr->gpe;
                 boot_ec->handle = ACPI_ROOT_OBJECT;
                 acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
index 2a32c843cb4a..8892b9824fae 100644
--- a/drivers/acpi/executer/exconfig.c
+++ b/drivers/acpi/executer/exconfig.c
@@ -479,5 +479,8 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 
         acpi_tb_set_table_loaded_flag(table_index, FALSE);
 
+        /* Table unloaded, remove a reference to the ddb_handle object */
+
+        acpi_ut_remove_reference(ddb_handle);
         return_ACPI_STATUS(AE_OK);
 }
diff --git a/drivers/acpi/namespace/nsnames.c b/drivers/acpi/namespace/nsnames.c
index 549db42f16cf..bd5773878009 100644
--- a/drivers/acpi/namespace/nsnames.c
+++ b/drivers/acpi/namespace/nsnames.c
@@ -56,13 +56,14 @@ ACPI_MODULE_NAME("nsnames")
  *              Size            - Size of the pathname
  *              *name_buffer    - Where to return the pathname
  *
- * RETURN:      Places the pathname into the name_buffer, in external format
+ * RETURN:      Status
+ *              Places the pathname into the name_buffer, in external format
  *              (name segments separated by path separators)
  *
  * DESCRIPTION: Generate a full pathaname
  *
  ******************************************************************************/
-void
+acpi_status
 acpi_ns_build_external_path(struct acpi_namespace_node *node,
                             acpi_size size, char *name_buffer)
 {
@@ -77,7 +78,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
         if (index < ACPI_NAME_SIZE) {
                 name_buffer[0] = AML_ROOT_PREFIX;
                 name_buffer[1] = 0;
-                return;
+                return (AE_OK);
         }
 
         /* Store terminator byte, then build name backwards */
@@ -105,11 +106,13 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 
         if (index != 0) {
                 ACPI_ERROR((AE_INFO,
-                            "Could not construct pathname; index=%X, size=%X, Path=%s",
+                            "Could not construct external pathname; index=%X, size=%X, Path=%s",
                             (u32) index, (u32) size, &name_buffer[size]));
+
+                return (AE_BAD_PARAMETER);
         }
 
-        return;
+        return (AE_OK);
 }
 
 #ifdef ACPI_DEBUG_OUTPUT
@@ -129,6 +132,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 
 char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 {
+        acpi_status status;
         char *name_buffer;
         acpi_size size;
 
@@ -138,8 +142,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
         size = acpi_ns_get_pathname_length(node);
         if (!size) {
-                ACPI_ERROR((AE_INFO, "Invalid node failure"));
-                return_PTR(NULL);
+                return (NULL);
         }
 
         /* Allocate a buffer to be returned to caller */
@@ -152,7 +155,11 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
         /* Build the path in the allocated buffer */
 
-        acpi_ns_build_external_path(node, size, name_buffer);
+        status = acpi_ns_build_external_path(node, size, name_buffer);
+        if (ACPI_FAILURE(status)) {
+                return (NULL);
+        }
+
         return_PTR(name_buffer);
 }
 #endif
@@ -186,7 +193,7 @@ acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node)
         while (next_node && (next_node != acpi_gbl_root_node)) {
                 if (ACPI_GET_DESCRIPTOR_TYPE(next_node) != ACPI_DESC_TYPE_NAMED) {
                         ACPI_ERROR((AE_INFO,
-                                    "Invalid NS Node (%p) while traversing path",
+                                    "Invalid Namespace Node (%p) while traversing namespace",
                                     next_node));
                         return 0;
                 }
@@ -234,8 +241,7 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 
         required_size = acpi_ns_get_pathname_length(node);
         if (!required_size) {
-                ACPI_ERROR((AE_INFO, "Invalid node failure"));
-                return_ACPI_STATUS(AE_ERROR);
+                return_ACPI_STATUS(AE_BAD_PARAMETER);
         }
 
         /* Validate/Allocate/Clear caller buffer */
@@ -247,7 +253,11 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 
         /* Build the path in the caller buffer */
 
-        acpi_ns_build_external_path(node, required_size, buffer->pointer);
+        status =
+            acpi_ns_build_external_path(node, required_size, buffer->pointer);
+        if (ACPI_FAILURE(status)) {
+                return_ACPI_STATUS(status);
+        }
 
         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X]\n",
                           (char *)buffer->pointer, (u32) required_size));
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 89f3b2abfdc7..cf47805a7448 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -849,7 +849,7 @@ static int __init acpi_irq_penalty_update(char *str, int used)
                 if (irq < 0)
                         continue;
 
-                if (irq >= ACPI_MAX_IRQS)
+                if (irq >= ARRAY_SIZE(acpi_irq_penalty))
                         continue;
 
                 if (used)
@@ -872,10 +872,12 @@ static int __init acpi_irq_penalty_update(char *str, int used)
  */
 void acpi_penalize_isa_irq(int irq, int active)
 {
-        if (active)
-                acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
-        else
-                acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+        if (irq >= 0 && irq < ARRAY_SIZE(acpi_irq_penalty)) {
+                if (active)
+                        acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
+                else
+                        acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+        }
 }
 
 /*
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index e36422a7122c..d3f0a62efcc1 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -123,7 +123,7 @@ struct acpi_processor_errata errata __read_mostly;
 static int set_no_mwait(const struct dmi_system_id *id)
 {
         printk(KERN_NOTICE PREFIX "%s detected - "
-                "disable mwait for CPU C-stetes\n", id->ident);
+                "disabling mwait for CPU C-states\n", id->ident);
         idle_nomwait = 1;
         return 0;
 }
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 283c08f5f4d4..cf5b1b7b684f 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -41,7 +41,6 @@
 #include <linux/pm_qos_params.h>
 #include <linux/clockchips.h>
 #include <linux/cpuidle.h>
-#include <linux/cpuidle.h>
 
 /*
  * Include the apic definitions for x86 to have the APIC timer related defines
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 0133af49cf06..80e32093e977 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -70,7 +70,7 @@ static DEFINE_MUTEX(performance_mutex);
  *  0 -> cpufreq low level drivers initialized -> consider _PPC values
  *  1 -> ignore _PPC totally -> forced by user through boot param
  */
-static unsigned int ignore_ppc = -1;
+static int ignore_ppc = -1;
 module_param(ignore_ppc, uint, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
                  "limited by BIOS, this should help");
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c
index f61ebc679e66..d9063ea414e3 100644
--- a/drivers/acpi/resources/rscalc.c
+++ b/drivers/acpi/resources/rscalc.c
@@ -587,6 +587,9 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
                         } else {
                                 temp_size_needed +=
                                     acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+                                if (!temp_size_needed) {
+                                        return_ACPI_STATUS(AE_BAD_PARAMETER);
+                                }
                         }
                 } else {
                         /*
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
index e7bf34a7b1d2..7dcb67e0b215 100644
--- a/drivers/acpi/utilities/utalloc.c
+++ b/drivers/acpi/utilities/utalloc.c
@@ -242,10 +242,12 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer,
 {
         acpi_status status = AE_OK;
 
-        if (!required_length) {
-                WARN_ON(1);
-                return AE_ERROR;
+        /* Parameter validation */
+
+        if (!buffer || !required_length) {
+                return (AE_BAD_PARAMETER);
         }
+
         switch (buffer->length) {
         case ACPI_NO_BUFFER:
 
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
index c5c791a575c9..42609d3a8aa9 100644
--- a/drivers/acpi/utilities/utdelete.c
+++ b/drivers/acpi/utilities/utdelete.c
@@ -135,6 +135,10 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
                 obj_pointer = object->package.elements;
                 break;
 
+                /*
+                 * These objects have a possible list of notify handlers.
+                 * Device object also may have a GPE block.
+                 */
         case ACPI_TYPE_DEVICE:
 
                 if (object->device.gpe_block) {
@@ -142,9 +146,14 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
                                                        gpe_block);
                 }
 
-                /* Walk the handler list for this device */
+                /*lint -fallthrough */
+
+        case ACPI_TYPE_PROCESSOR:
+        case ACPI_TYPE_THERMAL:
+
+                /* Walk the notify handler list for this object */
 
-                handler_desc = object->device.handler;
+                handler_desc = object->common_notify.handler;
                 while (handler_desc) {
                         next_desc = handler_desc->address_space.next;
                         acpi_ut_remove_reference(handler_desc);
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
index e25484495e65..916eff399eb3 100644
--- a/drivers/acpi/utilities/utobject.c
+++ b/drivers/acpi/utilities/utobject.c
@@ -425,6 +425,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
                                acpi_size * obj_length)
 {
         acpi_size length;
+        acpi_size size;
         acpi_status status = AE_OK;
 
         ACPI_FUNCTION_TRACE_PTR(ut_get_simple_object_size, internal_object);
@@ -484,10 +485,14 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
                          * Get the actual length of the full pathname to this object.
                          * The reference will be converted to the pathname to the object
                          */
-                        length +=
-                            ACPI_ROUND_UP_TO_NATIVE_WORD
-                            (acpi_ns_get_pathname_length
-                             (internal_object->reference.node));
+                        size =
+                            acpi_ns_get_pathname_length(internal_object->
+                                                        reference.node);
+                        if (!size) {
+                                return_ACPI_STATUS(AE_BAD_PARAMETER);
+                        }
+
+                        length += ACPI_ROUND_UP_TO_NATIVE_WORD(size);
                         break;
 
                 default:
diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
index c33b1c6e93b1..cfe2c833474d 100644
--- a/drivers/acpi/wmi.c
+++ b/drivers/acpi/wmi.c
@@ -347,7 +347,7 @@ struct acpi_buffer *out)
         strcpy(method, "WQ");
         strncat(method, block->object_id, 2);
 
-        status = acpi_evaluate_object(handle, method, NULL, out);
+        status = acpi_evaluate_object(handle, method, &input, out);
 
         /*
          * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 338b0b4dce9c..46f507531177 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -150,6 +150,9 @@ struct agp_bridge_data {
         char minor_version;
         struct list_head list;
         u32 apbase_config;
+        /* list of agp_memory mapped to the aperture */
+        struct list_head mapped_list;
+        spinlock_t mapped_lock;
 };
 
 #define KB(x)   ((x) * 1024)
diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c
index 1ffb381130c3..31dcd9142d54 100644
--- a/drivers/char/agp/ali-agp.c
+++ b/drivers/char/agp/ali-agp.c
@@ -110,7 +110,8 @@ static int ali_configure(void)
 
                 nlvm_addr+= agp_bridge->gart_bus_addr;
                 nlvm_addr|=(agp_bridge->gart_bus_addr>>12);
-                printk(KERN_INFO PFX "nlvm top &base = %8x\n",nlvm_addr);
+                dev_info(&agp_bridge->dev->dev, "nlvm top &base = %8x\n",
+                         nlvm_addr);
         }
 #endif
 
@@ -315,8 +316,8 @@ static int __devinit agp_ali_probe(struct pci_dev *pdev,
                         goto found;
         }
 
-        printk(KERN_ERR PFX "Unsupported ALi chipset (device id: %04x)\n",
-             pdev->device);
+        dev_err(&pdev->dev, "unsupported ALi chipset [%04x/%04x])\n",
+                pdev->vendor, pdev->device);
         return -ENODEV;
 
 
@@ -361,8 +362,7 @@ found:
                 bridge->driver = &ali_generic_bridge;
         }
 
-        printk(KERN_INFO PFX "Detected ALi %s chipset\n",
-                        devs[j].chipset_name);
+        dev_info(&pdev->dev, "ALi %s chipset\n", devs[j].chipset_name);
 
         /* Fill in the mode register */
         pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 39a0718bc616..e280531843be 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -419,8 +419,8 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
                 return -ENODEV;
 
         j = ent - agp_amdk7_pci_table;
-        printk(KERN_INFO PFX "Detected AMD %s chipset\n",
-               amd_agp_device_ids[j].chipset_name);
+        dev_info(&pdev->dev, "AMD %s chipset\n",
+                 amd_agp_device_ids[j].chipset_name);
 
         bridge = agp_alloc_bridge();
         if (!bridge)
@@ -442,7 +442,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
                 while (!cap_ptr) {
                         gfxcard = pci_get_class(PCI_CLASS_DISPLAY_VGA<<8, gfxcard);
                         if (!gfxcard) {
-                                printk (KERN_INFO PFX "Couldn't find an AGP VGA controller.\n");
+                                dev_info(&pdev->dev, "no AGP VGA controller\n");
                                 return -ENODEV;
                         }
                         cap_ptr = pci_find_capability(gfxcard, PCI_CAP_ID_AGP);
@@ -453,7 +453,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
                    (if necessary at all). */
                 if (gfxcard->vendor == PCI_VENDOR_ID_NVIDIA) {
                         agp_bridge->flags |= AGP_ERRATA_1X;
-                        printk (KERN_INFO PFX "AMD 751 chipset with NVidia GeForce detected. Forcing to 1X due to errata.\n");
+                        dev_info(&pdev->dev, "AMD 751 chipset with NVidia GeForce; forcing 1X due to errata\n");
                 }
                 pci_dev_put(gfxcard);
         }
@@ -469,7 +469,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
                         agp_bridge->flags = AGP_ERRATA_FASTWRITES;
                         agp_bridge->flags |= AGP_ERRATA_SBA;
                         agp_bridge->flags |= AGP_ERRATA_1X;
-                        printk (KERN_INFO PFX "AMD 761 chipset with errata detected - disabling AGP fast writes & SBA and forcing to 1X.\n");
+                        dev_info(&pdev->dev, "AMD 761 chipset with errata; disabling AGP fast writes & SBA and forcing to 1X\n");
                 }
         }
 
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 481ffe87c716..7495c522d8e4 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -34,6 +34,7 @@
 
 static struct resource *aperture_resource;
 static int __initdata agp_try_unsupported = 1;
+static int agp_bridges_found;
 
 static void amd64_tlbflush(struct agp_memory *temp)
 {
@@ -293,12 +294,13 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
          * so let double check that order, and lets trust the AMD NB settings
          */
         if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) {
-                printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n",
-                                  32 << order);
+                dev_info(&agp->dev, "aperture size %u MB is not right, using settings from NB\n",
+                         32 << order);
                 order = nb_order;
         }
 
-        printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order);
+        dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
+                 aper, 32 << order);
         if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
                 return -1;
 
@@ -319,10 +321,10 @@ static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
         for (i = 0; i < num_k8_northbridges; i++) {
                 struct pci_dev *dev = k8_northbridges[i];
                 if (fix_northbridge(dev, pdev, cap_ptr) < 0) {
-                        printk(KERN_ERR PFX "No usable aperture found.\n");
+                        dev_err(&dev->dev, "no usable aperture found\n");
 #ifdef __x86_64__
                         /* should port this to i386 */
-                        printk(KERN_ERR PFX "Consider rebooting with iommu=memaper=2 to get a good aperture.\n");
+                        dev_err(&dev->dev, "consider rebooting with iommu=memaper=2 to get a good aperture\n");
 #endif
                         return -1;
                 }
@@ -345,14 +347,14 @@ static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data
         default:   revstring="??"; break;
         }
 
-        printk (KERN_INFO PFX "Detected AMD 8151 AGP Bridge rev %s\n", revstring);
+        dev_info(&pdev->dev, "AMD 8151 AGP Bridge rev %s\n", revstring);
 
         /*
          * Work around errata.
          * Chips before B2 stepping incorrectly reporting v3.5
          */
         if (pdev->revision < 0x13) {
-                printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
+                dev_info(&pdev->dev, "correcting AGP revision (reports 3.5, is really 3.0)\n");
                 bridge->major_version = 3;
                 bridge->minor_version = 0;
         }
@@ -375,11 +377,11 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
         struct pci_dev *dev1;
         int i;
         unsigned size = amd64_fetch_size();
-        printk(KERN_INFO "Setting up ULi AGP.\n");
+
+        dev_info(&pdev->dev, "setting up ULi AGP\n");
         dev1 = pci_get_slot (pdev->bus,PCI_DEVFN(0,0));
         if (dev1 == NULL) {
-                printk(KERN_INFO PFX "Detected a ULi chipset, "
-                        "but could not fine the secondary device.\n");
+                dev_info(&pdev->dev, "can't find ULi secondary device\n");
                 return -ENODEV;
         }
 
@@ -388,7 +390,7 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
                         break;
 
         if (i == ARRAY_SIZE(uli_sizes)) {
-                printk(KERN_INFO PFX "No ULi size found for %d\n", size);
+                dev_info(&pdev->dev, "no ULi size found for %d\n", size);
                 return -ENODEV;
         }
 
@@ -433,13 +435,11 @@ static int nforce3_agp_init(struct pci_dev *pdev)
         int i;
         unsigned size = amd64_fetch_size();
 
-        printk(KERN_INFO PFX "Setting up Nforce3 AGP.\n");
+        dev_info(&pdev->dev, "setting up Nforce3 AGP\n");
 
         dev1 = pci_get_slot(pdev->bus, PCI_DEVFN(11, 0));
         if (dev1 == NULL) {
-                printk(KERN_INFO PFX "agpgart: Detected an NVIDIA "
-                        "nForce3 chipset, but could not find "
-                        "the secondary device.\n");
+                dev_info(&pdev->dev, "can't find Nforce3 secondary device\n");
                 return -ENODEV;
         }
 
@@ -448,7 +448,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
                         break;
 
         if (i == ARRAY_SIZE(nforce3_sizes)) {
-                printk(KERN_INFO PFX "No NForce3 size found for %d\n", size);
+                dev_info(&pdev->dev, "no NForce3 size found for %d\n", size);
                 return -ENODEV;
         }
 
@@ -462,7 +462,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 
         /* if x86-64 aperture base is beyond 4G, exit here */
         if ( (apbase & 0x7fff) >> (32 - 25) ) {
-                printk(KERN_INFO PFX "aperture base > 4G\n");
+                dev_info(&pdev->dev, "aperture base > 4G\n");
                 return -ENODEV;
         }
 
@@ -489,6 +489,7 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 {
         struct agp_bridge_data *bridge;
         u8 cap_ptr;
+        int err;
 
         cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
         if (!cap_ptr)
@@ -504,7 +505,8 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
             pdev->device == PCI_DEVICE_ID_AMD_8151_0) {
                 amd8151_init(pdev, bridge);
         } else {
-                printk(KERN_INFO PFX "Detected AGP bridge %x\n", pdev->devfn);
+                dev_info(&pdev->dev, "AGP bridge [%04x/%04x]\n",
+                         pdev->vendor, pdev->device);
         }
 
         bridge->driver = &amd_8151_driver;
@@ -536,7 +538,12 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
         }
 
         pci_set_drvdata(pdev, bridge);
-        return agp_add_bridge(bridge);
+        err = agp_add_bridge(bridge);
+        if (err < 0)
+                return err;
+
+        agp_bridges_found++;
+        return 0;
 }
 
 static void __devexit agp_amd64_remove(struct pci_dev *pdev)
@@ -713,7 +720,11 @@ int __init agp_amd64_init(void)
 
         if (agp_off)
                 return -EINVAL;
-        if (pci_register_driver(&agp_amd64_pci_driver) < 0) {
+        err = pci_register_driver(&agp_amd64_pci_driver);
+        if (err < 0)
+                return err;
+
+        if (agp_bridges_found == 0) {
                 struct pci_dev *dev;
                 if (!agp_try_unsupported && !agp_try_unsupported_boot) {
                         printk(KERN_INFO PFX "No supported AGP bridge found.\n");
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 3a4566c0d84f..6ecbcafb34b1 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -486,8 +486,8 @@ static int __devinit agp_ati_probe(struct pci_dev *pdev,
                         goto found;
         }
 
-        printk(KERN_ERR PFX
-             "Unsupported Ati chipset (device id: %04x)\n", pdev->device);
+        dev_err(&pdev->dev, "unsupported Ati chipset [%04x/%04x])\n",
+                pdev->vendor, pdev->device);
         return -ENODEV;
 
 found:
@@ -500,8 +500,7 @@ found:
 
         bridge->driver = &ati_generic_bridge;
 
-        printk(KERN_INFO PFX "Detected Ati %s chipset\n",
-                        devs[j].chipset_name);
+        dev_info(&pdev->dev, "Ati %s chipset\n", devs[j].chipset_name);
 
         /* Fill in the mode register */
         pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 1ec87104e68c..3a3cc03d401c 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -144,7 +144,8 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
                 void *addr = bridge->driver->agp_alloc_page(bridge);
 
                 if (!addr) {
-                        printk(KERN_ERR PFX "unable to get memory for scratch page.\n");
+                        dev_err(&bridge->dev->dev,
+                                "can't get memory for scratch page\n");
                         return -ENOMEM;
                 }
 
@@ -155,13 +156,13 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 
         size_value = bridge->driver->fetch_size();
         if (size_value == 0) {
-                printk(KERN_ERR PFX "unable to determine aperture size.\n");
+                dev_err(&bridge->dev->dev, "can't determine aperture size\n");
                 rc = -EINVAL;
                 goto err_out;
         }
         if (bridge->driver->create_gatt_table(bridge)) {
-                printk(KERN_ERR PFX
-                    "unable to get memory for graphics translation table.\n");
+                dev_err(&bridge->dev->dev,
+                        "can't get memory for graphics translation table\n");
                 rc = -ENOMEM;
                 goto err_out;
         }
@@ -169,7 +170,8 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 
         bridge->key_list = vmalloc(PAGE_SIZE * 4);
         if (bridge->key_list == NULL) {
-                printk(KERN_ERR PFX "error allocating memory for key lists.\n");
+                dev_err(&bridge->dev->dev,
+                        "can't allocate memory for key lists\n");
                 rc = -ENOMEM;
                 goto err_out;
         }
@@ -179,10 +181,12 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
         memset(bridge->key_list, 0, PAGE_SIZE * 4);
 
         if (bridge->driver->configure()) {
-                printk(KERN_ERR PFX "error configuring host chipset.\n");
+                dev_err(&bridge->dev->dev, "error configuring host chipset\n");
                 rc = -EINVAL;
                 goto err_out;
         }
+        INIT_LIST_HEAD(&bridge->mapped_list);
+        spin_lock_init(&bridge->mapped_lock);
 
         return 0;
 
@@ -269,25 +273,27 @@ int agp_add_bridge(struct agp_bridge_data *bridge)
 
         /* Grab reference on the chipset driver. */
         if (!try_module_get(bridge->driver->owner)) {
-                printk (KERN_INFO PFX "Couldn't lock chipset driver.\n");
+                dev_info(&bridge->dev->dev, "can't lock chipset driver\n");
                 return -EINVAL;
         }
 
         error = agp_backend_initialize(bridge);
         if (error) {
-                printk (KERN_INFO PFX "agp_backend_initialize() failed.\n");
+                dev_info(&bridge->dev->dev,
+                         "agp_backend_initialize() failed\n");
                 goto err_out;
         }
 
         if (list_empty(&agp_bridges)) {
                 error = agp_frontend_initialize();
                 if (error) {
-                        printk (KERN_INFO PFX "agp_frontend_initialize() failed.\n");
+                        dev_info(&bridge->dev->dev,
+                                 "agp_frontend_initialize() failed\n");
                         goto frontend_err;
                 }
 
-                printk(KERN_INFO PFX "AGP aperture is %dM @ 0x%lx\n",
-                        bridge->driver->fetch_size(), bridge->gart_bus_addr);
+                dev_info(&bridge->dev->dev, "AGP aperture is %dM @ 0x%lx\n",
+                         bridge->driver->fetch_size(), bridge->gart_bus_addr);
 
         }
 
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index dd370be00d68..10d6cbd7c05e 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -446,6 +446,10 @@ int agp_bind_memory(struct agp_memory *curr, off_t pg_start)
 
         curr->is_bound = true;
         curr->pg_start = pg_start;
+        spin_lock(&agp_bridge->mapped_lock);
+        list_add(&curr->mapped_list, &agp_bridge->mapped_list);
+        spin_unlock(&agp_bridge->mapped_lock);
+
         return 0;
 }
 EXPORT_SYMBOL(agp_bind_memory);
@@ -478,10 +482,34 @@ int agp_unbind_memory(struct agp_memory *curr)
 
         curr->is_bound = false;
         curr->pg_start = 0;
+        spin_lock(&curr->bridge->mapped_lock);
+        list_del(&curr->mapped_list);
+        spin_unlock(&curr->bridge->mapped_lock);
         return 0;
 }
 EXPORT_SYMBOL(agp_unbind_memory);
 
+/**
+ *      agp_rebind_emmory  -  Rewrite the entire GATT, useful on resume
+ */
+int agp_rebind_memory(void)
+{
+        struct agp_memory *curr;
+        int ret_val = 0;
+
+        spin_lock(&agp_bridge->mapped_lock);
+        list_for_each_entry(curr, &agp_bridge->mapped_list, mapped_list) {
+                ret_val = curr->bridge->driver->insert_memory(curr,
+                                                              curr->pg_start,
+                                                              curr->type);
+                if (ret_val != 0)
+                        break;
+        }
+        spin_unlock(&agp_bridge->mapped_lock);
+        return ret_val;
+}
+EXPORT_SYMBOL(agp_rebind_memory);
+
 /* End - Routines for handling swapping of agp_memory into the GATT */
 
 
@@ -788,8 +816,8 @@ void agp_device_command(u32 bridge_agpstat, bool agp_v3)
                 if (!agp)
                         continue;
 
-                printk(KERN_INFO PFX "Putting AGP V%d device at %s into %dx mode\n",
-                                agp_v3 ? 3 : 2, pci_name(device), mode);
+                dev_info(&device->dev, "putting AGP V%d device into %dx mode\n",
+                         agp_v3 ? 3 : 2, mode);
                 pci_write_config_dword(device, agp + PCI_AGP_COMMAND, bridge_agpstat);
         }
 }
@@ -817,10 +845,8 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
 
         get_agp_version(agp_bridge);
 
-        printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
-                                agp_bridge->major_version,
-                                agp_bridge->minor_version,
-                                pci_name(agp_bridge->dev));
+        dev_info(&agp_bridge->dev->dev, "AGP %d.%d bridge\n",
+                 agp_bridge->major_version, agp_bridge->minor_version);
 
         pci_read_config_dword(agp_bridge->dev,
                       agp_bridge->capndx + PCI_AGP_STATUS, &bridge_agpstat);
@@ -849,8 +875,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
                     pci_write_config_dword(bridge->dev,
                                         bridge->capndx+AGPCTRL, temp);
 
-                    printk(KERN_INFO PFX "Device is in legacy mode,"
-                                " falling back to 2.x\n");
+                    dev_info(&bridge->dev->dev, "bridge is in legacy mode, falling back to 2.x\n");
                 }
         }
 
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 290a1cf63925..043e36628d6d 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -32,8 +32,8 @@
 #define PCI_DEVICE_ID_INTEL_Q35_IG          0x29B2
 #define PCI_DEVICE_ID_INTEL_Q33_HB          0x29D0
 #define PCI_DEVICE_ID_INTEL_Q33_IG          0x29D2
-#define PCI_DEVICE_ID_INTEL_IGD_HB          0x2A40
-#define PCI_DEVICE_ID_INTEL_IGD_IG          0x2A42
+#define PCI_DEVICE_ID_INTEL_GM45_HB         0x2A40
+#define PCI_DEVICE_ID_INTEL_GM45_IG         0x2A42
 #define PCI_DEVICE_ID_INTEL_IGD_E_HB        0x2E00
 #define PCI_DEVICE_ID_INTEL_IGD_E_IG        0x2E02
 #define PCI_DEVICE_ID_INTEL_Q45_HB          0x2E10
@@ -55,7 +55,7 @@
                  agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_HB || \
                  agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GM_HB || \
                  agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GME_HB || \
-                 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB)
+                 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB)
 
 #define IS_G33 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G33_HB || \
                 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \
@@ -161,7 +161,7 @@ static int intel_i810_fetch_size(void)
         values = A_SIZE_FIX(agp_bridge->driver->aperture_sizes);
 
         if ((smram_miscc & I810_GMS) == I810_GMS_DISABLE) {
-                printk(KERN_WARNING PFX "i810 is disabled\n");
+                dev_warn(&agp_bridge->dev->dev, "i810 is disabled\n");
                 return 0;
         }
         if ((smram_miscc & I810_GFX_MEM_WIN_SIZE) == I810_GFX_MEM_WIN_32M) {
@@ -193,7 +193,8 @@ static int intel_i810_configure(void)
 
                 intel_private.registers = ioremap(temp, 128 * 4096);
                 if (!intel_private.registers) {
-                        printk(KERN_ERR PFX "Unable to remap memory.\n");
+                        dev_err(&intel_private.pcidev->dev,
+                                "can't remap memory\n");
                         return -ENOMEM;
                 }
         }
@@ -201,7 +202,8 @@ static int intel_i810_configure(void)
         if ((readl(intel_private.registers+I810_DRAM_CTL)
                 & I810_DRAM_ROW_0) == I810_DRAM_ROW_0_SDRAM) {
                 /* This will need to be dynamically assigned */
-                printk(KERN_INFO PFX "detected 4MB dedicated video ram.\n");
+                dev_info(&intel_private.pcidev->dev,
+                         "detected 4MB dedicated video ram\n");
                 intel_private.num_dcache_entries = 1024;
         }
         pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &temp);
@@ -500,8 +502,8 @@ static void intel_i830_init_gtt_entries(void)
                         size = 1024 + 512;
                         break;
                 default:
-                        printk(KERN_INFO PFX "Unknown page table size, "
-                               "assuming 512KB\n");
+                        dev_info(&intel_private.pcidev->dev,
+                                 "unknown page table size, assuming 512KB\n");
                         size = 512;
                 }
                 size += 4; /* add in BIOS popup space */
@@ -515,8 +517,8 @@ static void intel_i830_init_gtt_entries(void)
                         size = 2048;
                         break;
                 default:
-                        printk(KERN_INFO PFX "Unknown page table size 0x%x, "
-                                "assuming 512KB\n",
+                        dev_info(&agp_bridge->dev->dev,
+                                 "unknown page table size 0x%x, assuming 512KB\n",
                                 (gmch_ctrl & G33_PGETBL_SIZE_MASK));
                         size = 512;
                 }
@@ -627,11 +629,11 @@ static void intel_i830_init_gtt_entries(void)
                 }
         }
         if (gtt_entries > 0)
-                printk(KERN_INFO PFX "Detected %dK %s memory.\n",
+                dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
                        gtt_entries / KB(1), local ? "local" : "stolen");
         else
-                printk(KERN_INFO PFX
-                       "No pre-allocated video memory detected.\n");
+                dev_info(&agp_bridge->dev->dev,
+                       "no pre-allocated video memory detected\n");
         gtt_entries /= KB(4);
 
         intel_private.gtt_entries = gtt_entries;
@@ -801,10 +803,12 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start,
         num_entries = A_SIZE_FIX(temp)->num_entries;
 
         if (pg_start < intel_private.gtt_entries) {
-                printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n",
-                                pg_start, intel_private.gtt_entries);
+                dev_printk(KERN_DEBUG, &intel_private.pcidev->dev,
+                           "pg_start == 0x%.8lx, intel_private.gtt_entries == 0x%.8x\n",
+                           pg_start, intel_private.gtt_entries);
 
-                printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n");
+                dev_info(&intel_private.pcidev->dev,
+                         "trying to insert into local/stolen memory\n");
                 goto out_err;
         }
 
@@ -851,7 +855,8 @@ static int intel_i830_remove_entries(struct agp_memory *mem, off_t pg_start,
                 return 0;
 
         if (pg_start < intel_private.gtt_entries) {
-                printk(KERN_INFO PFX "Trying to disable local/stolen memory\n");
+                dev_info(&intel_private.pcidev->dev,
+                         "trying to disable local/stolen memory\n");
                 return -EINVAL;
         }
 
@@ -957,7 +962,7 @@ static void intel_i9xx_setup_flush(void)
         if (intel_private.ifp_resource.start) {
                 intel_private.i9xx_flush_page = ioremap_nocache(intel_private.ifp_resource.start, PAGE_SIZE);
                 if (!intel_private.i9xx_flush_page)
-                        printk(KERN_INFO "unable to ioremap flush  page - no chipset flushing");
+                        dev_info(&intel_private.pcidev->dev, "can't ioremap flush page - no chipset flushing");
         }
 }
 
@@ -1028,10 +1033,12 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start,
         num_entries = A_SIZE_FIX(temp)->num_entries;
 
         if (pg_start < intel_private.gtt_entries) {
-                printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n",
-                                pg_start, intel_private.gtt_entries);
+                dev_printk(KERN_DEBUG, &intel_private.pcidev->dev,
+                           "pg_start == 0x%.8lx, intel_private.gtt_entries == 0x%.8x\n",
+                           pg_start, intel_private.gtt_entries);
 
-                printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n");
+                dev_info(&intel_private.pcidev->dev,
+                         "trying to insert into local/stolen memory\n");
                 goto out_err;
         }
 
@@ -1078,7 +1085,8 @@ static int intel_i915_remove_entries(struct agp_memory *mem, off_t pg_start,
                 return 0;
 
         if (pg_start < intel_private.gtt_entries) {
-                printk(KERN_INFO PFX "Trying to disable local/stolen memory\n");
+                dev_info(&intel_private.pcidev->dev,
+                         "trying to disable local/stolen memory\n");
                 return -EINVAL;
         }
 
@@ -1182,7 +1190,7 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge,
 static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
 {
         switch (agp_bridge->dev->device) {
-        case PCI_DEVICE_ID_INTEL_IGD_HB:
+        case PCI_DEVICE_ID_INTEL_GM45_HB:
         case PCI_DEVICE_ID_INTEL_IGD_E_HB:
         case PCI_DEVICE_ID_INTEL_Q45_HB:
         case PCI_DEVICE_ID_INTEL_G45_HB:
@@ -1379,7 +1387,7 @@ static int intel_815_configure(void)
         /* the Intel 815 chipset spec. says that bits 29-31 in the
         * ATTBASE register are reserved -> try not to write them */
         if (agp_bridge->gatt_bus_addr & INTEL_815_ATTBASE_MASK) {
-                printk(KERN_EMERG PFX "gatt bus addr too high");
+                dev_emerg(&agp_bridge->dev->dev, "gatt bus addr too high");
                 return -EINVAL;
         }
 
@@ -2145,8 +2153,8 @@ static const struct intel_driver_description {
                 NULL, &intel_g33_driver },
         { PCI_DEVICE_ID_INTEL_Q33_HB, PCI_DEVICE_ID_INTEL_Q33_IG, 0, "Q33",
                 NULL, &intel_g33_driver },
-        { PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0,
-            "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+        { PCI_DEVICE_ID_INTEL_GM45_HB, PCI_DEVICE_ID_INTEL_GM45_IG, 0,
+            "Mobile Intel? GM45 Express", NULL, &intel_i965_driver },
         { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0,
             "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
         { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0,
@@ -2191,8 +2199,8 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 
         if (intel_agp_chipsets[i].name == NULL) {
                 if (cap_ptr)
-                        printk(KERN_WARNING PFX "Unsupported Intel chipset"
-                               "(device id: %04x)\n", pdev->device);
+                        dev_warn(&pdev->dev, "unsupported Intel chipset [%04x/%04x]\n",
+                                 pdev->vendor, pdev->device);
                 agp_put_bridge(bridge);
                 return -ENODEV;
         }
@@ -2200,9 +2208,8 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
         if (bridge->driver == NULL) {
                 /* bridge has no AGP and no IGD detected */
                 if (cap_ptr)
-                        printk(KERN_WARNING PFX "Failed to find bridge device "
-                                "(chip_id: %04x)\n",
-                                intel_agp_chipsets[i].gmch_chip_id);
+                        dev_warn(&pdev->dev, "can't find bridge device (chip_id: %04x)\n",
+                                 intel_agp_chipsets[i].gmch_chip_id);
                 agp_put_bridge(bridge);
                 return -ENODEV;
         }
@@ -2211,8 +2218,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
         bridge->capndx = cap_ptr;
         bridge->dev_private_data = &intel_private;
 
-        printk(KERN_INFO PFX "Detected an Intel %s Chipset.\n",
-                intel_agp_chipsets[i].name);
+        dev_info(&pdev->dev, "Intel %s Chipset\n", intel_agp_chipsets[i].name);
 
         /*
         * The following fixes the case where the BIOS has "forgotten" to
@@ -2222,7 +2228,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
         r = &pdev->resource[0];
         if (!r->start && r->end) {
                 if (pci_assign_resource(pdev, 0)) {
-                        printk(KERN_ERR PFX "could not assign resource 0\n");
+                        dev_err(&pdev->dev, "can't assign resource 0\n");
                         agp_put_bridge(bridge);
                         return -ENODEV;
                 }
@@ -2234,7 +2240,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
         * 20030610 - hamish@zot.org
         */
         if (pci_enable_device(pdev)) {
-                printk(KERN_ERR PFX "Unable to Enable PCI device\n");
+                dev_err(&pdev->dev, "can't enable PCI device\n");
                 agp_put_bridge(bridge);
                 return -ENODEV;
         }
@@ -2266,6 +2272,7 @@ static void __devexit agp_intel_remove(struct pci_dev *pdev)
 static int agp_intel_resume(struct pci_dev *pdev)
 {
         struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
+        int ret_val;
 
         pci_restore_state(pdev);
 
@@ -2293,6 +2300,10 @@ static int agp_intel_resume(struct pci_dev *pdev)
         else if (bridge->driver == &intel_i965_driver)
                 intel_i915_configure();
 
+        ret_val = agp_rebind_memory();
+        if (ret_val != 0)
+                return ret_val;
+
         return 0;
 }
 #endif
@@ -2343,7 +2354,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
         ID(PCI_DEVICE_ID_INTEL_G33_HB),
         ID(PCI_DEVICE_ID_INTEL_Q35_HB),
         ID(PCI_DEVICE_ID_INTEL_Q33_HB),
-        ID(PCI_DEVICE_ID_INTEL_IGD_HB),
+        ID(PCI_DEVICE_ID_INTEL_GM45_HB),
         ID(PCI_DEVICE_ID_INTEL_IGD_E_HB),
         ID(PCI_DEVICE_ID_INTEL_Q45_HB),
         ID(PCI_DEVICE_ID_INTEL_G45_HB),
diff --git a/drivers/char/agp/isoch.c b/drivers/char/agp/isoch.c
index 3f9ccde62377..c73385cc4b8a 100644
--- a/drivers/char/agp/isoch.c
+++ b/drivers/char/agp/isoch.c
@@ -153,7 +153,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 
         /* Check if this configuration has any chance of working */
         if (tot_bw > target.maxbw) {
-                printk(KERN_ERR PFX "isochronous bandwidth required "
+                dev_err(&td->dev, "isochronous bandwidth required "
                         "by AGP 3.0 devices exceeds that which is supported by "
                         "the AGP 3.0 bridge!\n");
                 ret = -ENODEV;
@@ -188,7 +188,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
         /* Exit if the minimal ISOCH_N allocation among the masters is more
          * than the target can handle. */
         if (tot_n > target.n) {
-                printk(KERN_ERR PFX "number of isochronous "
+                dev_err(&td->dev, "number of isochronous "
                         "transactions per period required by AGP 3.0 devices "
                         "exceeds that which is supported by the AGP 3.0 "
                         "bridge!\n");
@@ -229,7 +229,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
         /* Exit if the minimal RQ needs of the masters exceeds what the target
          * can provide. */
         if (tot_rq > rq_isoch) {
-                printk(KERN_ERR PFX "number of request queue slots "
+                dev_err(&td->dev, "number of request queue slots "
                         "required by the isochronous bandwidth requested by "
                         "AGP 3.0 devices exceeds the number provided by the "
                         "AGP 3.0 bridge!\n");
@@ -359,8 +359,9 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
                         case 0x0001:    /* Unclassified device */
                                 /* Don't know what this is, but log it for investigation. */
                                 if (mcapndx != 0) {
-                                        printk (KERN_INFO PFX "Wacky, found unclassified AGP device. %x:%x\n",
-                                                dev->vendor, dev->device);
+                                        dev_info(&td->dev, "wacky, found unclassified AGP device %s [%04x/%04x]\n",
+                                                 pci_name(dev),
+                                                 dev->vendor, dev->device);
                                 }
                                 continue;
 
@@ -407,17 +408,18 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
                 }
 
                 if (mcapndx == 0) {
-                        printk(KERN_ERR PFX "woah!  Non-AGP device "
-                                "found on the secondary bus of an AGP 3.5 bridge!\n");
+                        dev_err(&td->dev, "woah!  Non-AGP device %s on "
+                                "secondary bus of AGP 3.5 bridge!\n",
+                                pci_name(dev));
                         ret = -ENODEV;
                         goto free_and_exit;
                 }
 
                 mmajor = (ncapid >> AGP_MAJOR_VERSION_SHIFT) & 0xf;
                 if (mmajor < 3) {
-                        printk(KERN_ERR PFX "woah!  AGP 2.0 device "
-                                "found on the secondary bus of an AGP 3.5 "
-                                "bridge operating with AGP 3.0 electricals!\n");
+                        dev_err(&td->dev, "woah!  AGP 2.0 device %s on "
+                                "secondary bus of AGP 3.5 bridge operating "
+                                "with AGP 3.0 electricals!\n", pci_name(dev));
                         ret = -ENODEV;
                         goto free_and_exit;
                 }
@@ -427,10 +429,10 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
                 pci_read_config_dword(dev, cur->capndx+AGPSTAT, &mstatus);
 
                 if (((mstatus >> 3) & 0x1) == 0) {
-                        printk(KERN_ERR PFX "woah!  AGP 3.x device "
-                                "not operating in AGP 3.x mode found on the "
-                                "secondary bus of an AGP 3.5 bridge operating "
-                                "with AGP 3.0 electricals!\n");
+                        dev_err(&td->dev, "woah!  AGP 3.x device %s not "
+                                "operating in AGP 3.x mode on secondary bus "
+                                "of AGP 3.5 bridge operating with AGP 3.0 "
+                                "electricals!\n", pci_name(dev));
                         ret = -ENODEV;
                         goto free_and_exit;
                 }
@@ -444,9 +446,9 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
         if (isoch) {
                 ret = agp_3_5_isochronous_node_enable(bridge, dev_list, ndevs);
                 if (ret) {
-                        printk(KERN_INFO PFX "Something bad happened setting "
-                               "up isochronous xfers.  Falling back to "
-                               "non-isochronous xfer mode.\n");
+                        dev_info(&td->dev, "something bad happened setting "
+                                 "up isochronous xfers; falling back to "
+                                 "non-isochronous xfer mode\n");
                 } else {
                         goto free_and_exit;
                 }
@@ -466,4 +468,3 @@ free_and_exit:
 get_out:
         return ret;
 }
-
diff --git a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c
index b6791846809f..2587ef96a960 100644
--- a/drivers/char/agp/sis-agp.c
+++ b/drivers/char/agp/sis-agp.c
@@ -79,10 +79,8 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
         u32 command;
         int rate;
 
-        printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
-                agp_bridge->major_version,
-                agp_bridge->minor_version,
-                pci_name(agp_bridge->dev));
+        dev_info(&agp_bridge->dev->dev, "AGP %d.%d bridge\n",
+                 agp_bridge->major_version, agp_bridge->minor_version);
 
         pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx + PCI_AGP_STATUS, &command);
         command = agp_collect_device_status(bridge, mode, command);
@@ -94,8 +92,8 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
                 if (!agp)
                         continue;
 
-                printk(KERN_INFO PFX "Putting AGP V3 device at %s into %dx mode\n",
-                        pci_name(device), rate);
+                dev_info(&agp_bridge->dev->dev, "putting AGP V3 device at %s into %dx mode\n",
+                         pci_name(device), rate);
 
                 pci_write_config_dword(device, agp + PCI_AGP_COMMAND, command);
 
@@ -105,7 +103,7 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
                  * cannot be configured
                  */
                 if (device->device == bridge->dev->device) {
-                        printk(KERN_INFO PFX "SiS delay workaround: giving bridge time to recover.\n");
+                        dev_info(&agp_bridge->dev->dev, "SiS delay workaround: giving bridge time to recover\n");
                         msleep(10);
                 }
         }
@@ -190,7 +188,8 @@ static int __devinit agp_sis_probe(struct pci_dev *pdev,
                 return -ENODEV;
 
 
-        printk(KERN_INFO PFX "Detected SiS chipset - id:%i\n", pdev->device);
+        dev_info(&pdev->dev, "SiS chipset [%04x/%04x]\n",
+                 pdev->vendor, pdev->device);
         bridge = agp_alloc_bridge();
         if (!bridge)
                 return -ENOMEM;
@@ -242,7 +241,7 @@ static struct pci_device_id agp_sis_pci_table[] = {
                 .class          = (PCI_CLASS_BRIDGE_HOST << 8),
                 .class_mask     = ~0,
                 .vendor         = PCI_VENDOR_ID_SI,
-                .device         = PCI_DEVICE_ID_SI_5591_AGP,
+                .device         = PCI_DEVICE_ID_SI_5591,
                 .subvendor      = PCI_ANY_ID,
                 .subdevice      = PCI_ANY_ID,
         },
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 0e054c134490..2fb27fe4c10c 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -241,7 +241,8 @@ static void serverworks_tlbflush(struct agp_memory *temp)
         while (readb(serverworks_private.registers+SVWRKS_POSTFLUSH) == 1) {
                 cpu_relax();
                 if (time_after(jiffies, timeout)) {
-                        printk(KERN_ERR PFX "TLB post flush took more than 3 seconds\n");
+                        dev_err(&serverworks_private.svrwrks_dev->dev,
+                                "TLB post flush took more than 3 seconds\n");
                         break;
                 }
         }
@@ -251,7 +252,8 @@ static void serverworks_tlbflush(struct agp_memory *temp)
         while (readl(serverworks_private.registers+SVWRKS_DIRFLUSH) == 1) {
                 cpu_relax();
                 if (time_after(jiffies, timeout)) {
-                        printk(KERN_ERR PFX "TLB Dir flush took more than 3 seconds\n");
+                        dev_err(&serverworks_private.svrwrks_dev->dev,
+                                "TLB Dir flush took more than 3 seconds\n");
                         break;
                 }
         }
@@ -271,7 +273,7 @@ static int serverworks_configure(void)
         temp = (temp & PCI_BASE_ADDRESS_MEM_MASK);
         serverworks_private.registers = (volatile u8 __iomem *) ioremap(temp, 4096);
         if (!serverworks_private.registers) {
-                printk (KERN_ERR PFX "Unable to ioremap() memory.\n");
+                dev_err(&agp_bridge->dev->dev, "can't ioremap(%#x)\n", temp);
                 return -ENOMEM;
         }
 
@@ -451,7 +453,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 
         switch (pdev->device) {
         case 0x0006:
-                printk (KERN_ERR PFX "ServerWorks CNB20HE is unsupported due to lack of documentation.\n");
+                dev_err(&pdev->dev, "ServerWorks CNB20HE is unsupported due to lack of documentation\n");
                 return -ENODEV;
 
         case PCI_DEVICE_ID_SERVERWORKS_HE:
@@ -461,8 +463,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 
         default:
                 if (cap_ptr)
-                        printk(KERN_ERR PFX "Unsupported Serverworks chipset "
-                                        "(device id: %04x)\n", pdev->device);
+                        dev_err(&pdev->dev, "unsupported Serverworks chipset "
+                                "[%04x/%04x]\n", pdev->vendor, pdev->device);
                 return -ENODEV;
         }
 
@@ -470,8 +472,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
         bridge_dev = pci_get_bus_and_slot((unsigned int)pdev->bus->number,
                         PCI_DEVFN(0, 1));
         if (!bridge_dev) {
-                printk(KERN_INFO PFX "Detected a Serverworks chipset "
-                       "but could not find the secondary device.\n");
+                dev_info(&pdev->dev, "can't find secondary device\n");
                 return -ENODEV;
         }
 
@@ -482,8 +483,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
         if (temp & PCI_BASE_ADDRESS_MEM_TYPE_64) {
                 pci_read_config_dword(pdev, SVWRKS_APSIZE + 4, &temp2);
                 if (temp2 != 0) {
-                        printk(KERN_INFO PFX "Detected 64 bit aperture address, "
-                               "but top bits are not zero.  Disabling agp\n");
+                        dev_info(&pdev->dev, "64 bit aperture address, "
+                                 "but top bits are not zero; disabling AGP\n");
                         return -ENODEV;
                 }
                 serverworks_private.mm_addr_ofs = 0x18;
@@ -495,8 +496,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
                 pci_read_config_dword(pdev,
                                 serverworks_private.mm_addr_ofs + 4, &temp2);
                 if (temp2 != 0) {
-                        printk(KERN_INFO PFX "Detected 64 bit MMIO address, "
-                               "but top bits are not zero.  Disabling agp\n");
+                        dev_info(&pdev->dev, "64 bit MMIO address, but top "
+                                 "bits are not zero; disabling AGP\n");
                         return -ENODEV;
                 }
         }
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index d2fa3cfca02a..eef72709ec53 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -46,8 +46,8 @@ static int uninorth_fetch_size(void)
                                 break;
 
                 if (i == agp_bridge->driver->num_aperture_sizes) {
-                        printk(KERN_ERR PFX "Invalid aperture size, using"
-                               " default\n");
+                        dev_err(&agp_bridge->dev->dev, "invalid aperture size, "
+                                "using default\n");
                         size = 0;
                         aperture = NULL;
                 }
@@ -108,8 +108,8 @@ static int uninorth_configure(void)
 
         current_size = A_SIZE_32(agp_bridge->current_size);
 
-        printk(KERN_INFO PFX "configuring for size idx: %d\n",
-               current_size->size_value);
+        dev_info(&agp_bridge->dev->dev, "configuring for size idx: %d\n",
+                 current_size->size_value);
 
         /* aperture size and gatt addr */
         pci_write_config_dword(agp_bridge->dev,
@@ -197,8 +197,9 @@ static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
         gp = (u32 *) &agp_bridge->gatt_table[pg_start];
         for (i = 0; i < mem->page_count; ++i) {
                 if (gp[i]) {
-                        printk("u3_insert_memory: entry 0x%x occupied (%x)\n",
-                               i, gp[i]);
+                        dev_info(&agp_bridge->dev->dev,
+                                 "u3_insert_memory: entry 0x%x occupied (%x)\n",
+                                 i, gp[i]);
                         return -EBUSY;
                 }
         }
@@ -276,8 +277,8 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
                                        &scratch);
         } while ((scratch & PCI_AGP_COMMAND_AGP) == 0 && ++timeout < 1000);
         if ((scratch & PCI_AGP_COMMAND_AGP) == 0)
-                printk(KERN_ERR PFX "failed to write UniNorth AGP"
-                       " command register\n");
+                dev_err(&bridge->dev->dev, "can't write UniNorth AGP "
+                        "command register\n");
 
         if (uninorth_rev >= 0x30) {
                 /* This is an AGP V3 */
@@ -330,8 +331,8 @@ static int agp_uninorth_suspend(struct pci_dev *pdev)
                 pci_read_config_dword(device, agp + PCI_AGP_COMMAND, &cmd);
                 if (!(cmd & PCI_AGP_COMMAND_AGP))
                         continue;
-                printk("uninorth-agp: disabling AGP on device %s\n",
-                                pci_name(device));
+                dev_info(&pdev->dev, "disabling AGP on device %s\n",
+                         pci_name(device));
                 cmd &= ~PCI_AGP_COMMAND_AGP;
                 pci_write_config_dword(device, agp + PCI_AGP_COMMAND, cmd);
         }
@@ -341,8 +342,7 @@ static int agp_uninorth_suspend(struct pci_dev *pdev)
         pci_read_config_dword(pdev, agp + PCI_AGP_COMMAND, &cmd);
         bridge->dev_private_data = (void *)(long)cmd;
         if (cmd & PCI_AGP_COMMAND_AGP) {
-                printk("uninorth-agp: disabling AGP on bridge %s\n",
-                                pci_name(pdev));
+                dev_info(&pdev->dev, "disabling AGP on bridge\n");
                 cmd &= ~PCI_AGP_COMMAND_AGP;
                 pci_write_config_dword(pdev, agp + PCI_AGP_COMMAND, cmd);
         }
@@ -591,14 +591,14 @@ static int __devinit agp_uninorth_probe(struct pci_dev *pdev,
         /* probe for known chipsets */
         for (j = 0; devs[j].chipset_name != NULL; ++j) {
                 if (pdev->device == devs[j].device_id) {
-                        printk(KERN_INFO PFX "Detected Apple %s chipset\n",
-                               devs[j].chipset_name);
+                        dev_info(&pdev->dev, "Apple %s chipset\n",
+                                 devs[j].chipset_name);
                         goto found;
                 }
         }
 
-        printk(KERN_ERR PFX "Unsupported Apple chipset (device id: %04x).\n",
-                pdev->device);
+        dev_err(&pdev->dev, "unsupported Apple chipset [%04x/%04x]\n",
+                pdev->vendor, pdev->device);
         return -ENODEV;
 
  found:
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 02aac104842d..fd64137b1ab9 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -322,11 +322,10 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 
         hp->tty = tty;
 
-        if (hp->ops->notifier_add)
-                rc = hp->ops->notifier_add(hp, hp->data);
-
         spin_unlock_irqrestore(&hp->lock, flags);
 
+        if (hp->ops->notifier_add)
+                rc = hp->ops->notifier_add(hp, hp->data);
 
         /*
          * If the notifier fails we return an error.  The tty layer
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index f7feae4ebb5e..128202e18fc9 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -31,6 +31,7 @@
 #include <asm/io.h>
 #include <asm/msr.h>
 #include <asm/cpufeature.h>
+#include <asm/i387.h>
 
 
 #define PFX     KBUILD_MODNAME ": "
@@ -67,16 +68,23 @@ enum {
  * Another possible performance boost may come from simply buffering
  * until we have 4 bytes, thus returning a u32 at a time,
  * instead of the current u8-at-a-time.
+ *
+ * Padlock instructions can generate a spurious DNA fault, so
+ * we have to call them in the context of irq_ts_save/restore()
  */
 
 static inline u32 xstore(u32 *addr, u32 edx_in)
 {
         u32 eax_out;
+        int ts_state;
+
+        ts_state = irq_ts_save();
 
         asm(".byte 0x0F,0xA7,0xC0 /* xstore %%edi (addr=%0) */"
                 :"=m"(*addr), "=a"(eax_out)
                 :"D"(addr), "d"(edx_in));
 
+        irq_ts_restore(ts_state);
         return eax_out;
 }
 
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index b1414507997c..3a23e7694d55 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -29,7 +29,6 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/uaccess.h>
-#include <linux/version.h>
 
 #include "tty.h"
 #include "network.h"
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index d9799e2bcfbf..f53d4d00faf0 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -78,7 +78,6 @@
 #include <linux/wait.h>
 #include <linux/bcd.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 
 #include <asm/current.h>
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 509c89ac5bd3..08911ed66494 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -47,7 +47,6 @@
 
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 0e6866fe0f96..a27160ba21d7 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2496,45 +2496,25 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
 }
 
 /**
- *      tiocswinsz              -       implement window size set ioctl
- *      @tty; tty
- *      @arg: user buffer for result
+ *      tty_do_resize           -       resize event
+ *      @tty: tty being resized
+ *      @real_tty: real tty (if using a pty/tty pair)
+ *      @rows: rows (character)
+ *      @cols: cols (character)
  *
- *      Copies the user idea of the window size to the kernel. Traditionally
- *      this is just advisory information but for the Linux console it
- *      actually has driver level meaning and triggers a VC resize.
- *
- *      Locking:
- *              Called function use the console_sem is used to ensure we do
- *      not try and resize the console twice at once.
- *              The tty->termios_mutex is used to ensure we don't double
- *      resize and get confused. Lock order - tty->termios_mutex before
- *      console sem
+ *      Update the termios variables and send the neccessary signals to
+ *      peform a terminal resize correctly
  */
 
-static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
-        struct winsize __user *arg)
+int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+                                        struct winsize *ws)
 {
-        struct winsize tmp_ws;
         struct pid *pgrp, *rpgrp;
         unsigned long flags;
 
-        if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
-                return -EFAULT;
-
         mutex_lock(&tty->termios_mutex);
-        if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
+        if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
                 goto done;
-
-#ifdef CONFIG_VT
-        if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) {
-                if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col,
-                                        tmp_ws.ws_row)) {
-                        mutex_unlock(&tty->termios_mutex);
-                        return -ENXIO;
-                }
-        }
-#endif
         /* Get the PID values and reference them so we can
            avoid holding the tty ctrl lock while sending signals */
         spin_lock_irqsave(&tty->ctrl_lock, flags);
@@ -2550,14 +2530,42 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
         put_pid(pgrp);
         put_pid(rpgrp);
 
-        tty->winsize = tmp_ws;
-        real_tty->winsize = tmp_ws;
+        tty->winsize = *ws;
+        real_tty->winsize = *ws;
 done:
         mutex_unlock(&tty->termios_mutex);
         return 0;
 }
 
 /**
+ *      tiocswinsz              -       implement window size set ioctl
+ *      @tty; tty
+ *      @arg: user buffer for result
+ *
+ *      Copies the user idea of the window size to the kernel. Traditionally
+ *      this is just advisory information but for the Linux console it
+ *      actually has driver level meaning and triggers a VC resize.
+ *
+ *      Locking:
+ *              Driver dependant. The default do_resize method takes the
+ *      tty termios mutex and ctrl_lock. The console takes its own lock
+ *      then calls into the default method.
+ */
+
+static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
+        struct winsize __user *arg)
+{
+        struct winsize tmp_ws;
+        if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
+                return -EFAULT;
+
+        if (tty->ops->resize)
+                return tty->ops->resize(tty, real_tty, &tmp_ws);
+        else
+                return tty_do_resize(tty, real_tty, &tmp_ws);
+}
+
+/**
  *      tioccons        -       allow admin to move logical console
  *      @file: the file to become console
  *
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 1bc00c9d860d..60359c360912 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -803,7 +803,25 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
  */
 #define VC_RESIZE_MAXCOL (32767)
 #define VC_RESIZE_MAXROW (32767)
-int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+
+/**
+ *      vc_do_resize    -       resizing method for the tty
+ *      @tty: tty being resized
+ *      @real_tty: real tty (different to tty if a pty/tty pair)
+ *      @vc: virtual console private data
+ *      @cols: columns
+ *      @lines: lines
+ *
+ *      Resize a virtual console, clipping according to the actual constraints.
+ *      If the caller passes a tty structure then update the termios winsize
+ *      information and perform any neccessary signal handling.
+ *
+ *      Caller must hold the console semaphore. Takes the termios mutex and
+ *      ctrl_lock of the tty IFF a tty is passed.
+ */
+
+static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+                struct vc_data *vc, unsigned int cols, unsigned int lines)
 {
         unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
         unsigned int old_cols, old_rows, old_row_size, old_screen_size;
@@ -907,24 +925,15 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
         gotoxy(vc, vc->vc_x, vc->vc_y);
         save_cur(vc);
 
-        if (vc->vc_tty) {
-                struct winsize ws, *cws = &vc->vc_tty->winsize;
-                struct pid *pgrp = NULL;
-
+        if (tty) {
+                /* Rewrite the requested winsize data with the actual
+                   resulting sizes */
+                struct winsize ws;
                 memset(&ws, 0, sizeof(ws));
                 ws.ws_row = vc->vc_rows;
                 ws.ws_col = vc->vc_cols;
                 ws.ws_ypixel = vc->vc_scan_lines;
-
-                spin_lock_irq(&vc->vc_tty->ctrl_lock);
-                if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
-                        pgrp = get_pid(vc->vc_tty->pgrp);
-                spin_unlock_irq(&vc->vc_tty->ctrl_lock);
-                if (pgrp) {
-                        kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
-                        put_pid(pgrp);
-                }
-                *cws = ws;
+                tty_do_resize(tty, real_tty, &ws);
         }
 
         if (CON_IS_VISIBLE(vc))
@@ -932,14 +941,47 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
         return err;
 }
 
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+/**
+ *      vc_resize               -       resize a VT
+ *      @vc: virtual console
+ *      @cols: columns
+ *      @rows: rows
+ *
+ *      Resize a virtual console as seen from the console end of things. We
+ *      use the common vc_do_resize methods to update the structures. The
+ *      caller must hold the console sem to protect console internals and
+ *      vc->vc_tty
+ */
+
+int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
+{
+        return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows);
+}
+
+/**
+ *      vt_resize               -       resize a VT
+ *      @tty: tty to resize
+ *      @real_tty: tty if a pty/tty pair
+ *      @ws: winsize attributes
+ *
+ *      Resize a virtual terminal. This is called by the tty layer as we
+ *      register our own handler for resizing. The mutual helper does all
+ *      the actual work.
+ *
+ *      Takes the console sem and the called methods then take the tty
+ *      termios_mutex and the tty ctrl_lock in that order.
+ */
+
+int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+        struct winsize *ws)
 {
-        int rc;
+        struct vc_data *vc = tty->driver_data;
+        int ret;
 
         acquire_console_sem();
-        rc = vc_resize(vc, cols, lines);
+        ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row);
         release_console_sem();
-        return rc;
+        return ret;
 }
 
 void vc_deallocate(unsigned int currcons)
@@ -2907,6 +2949,7 @@ static const struct tty_operations con_ops = {
         .start = con_start,
         .throttle = con_throttle,
         .unthrottle = con_unthrottle,
+        .resize = vt_resize,
 };
 
 int __init vty_init(void)
@@ -4061,7 +4104,6 @@ EXPORT_SYMBOL(default_blu);
 EXPORT_SYMBOL(update_region);
 EXPORT_SYMBOL(redraw_screen);
 EXPORT_SYMBOL(vc_resize);
-EXPORT_SYMBOL(vc_lock_resize);
 EXPORT_SYMBOL(fg_console);
 EXPORT_SYMBOL(console_blank_hook);
 EXPORT_SYMBOL(console_blanked);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 3211afd9d57e..c904e9ad4a71 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -947,14 +947,16 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
                     get_user(cc, &vtsizes->v_cols))
                         ret = -EFAULT;
                 else {
+                        acquire_console_sem();
                         for (i = 0; i < MAX_NR_CONSOLES; i++) {
                                 vc = vc_cons[i].d;
 
                                 if (vc) {
                                         vc->vc_resize_user = 1;
-                                        vc_lock_resize(vc_cons[i].d, cc, ll);
+                                        vc_resize(vc_cons[i].d, cc, ll);
                                 }
                         }
+                        release_console_sem();
                 }
                 break;
         }
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 8bfee5fb7223..278c9857bcf5 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -74,7 +74,6 @@
  * currently programmed in the FPGA.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c
index ba7b9a6b17a1..a4bec3f919aa 100644
--- a/drivers/cpuidle/governors/ladder.c
+++ b/drivers/cpuidle/governors/ladder.c
@@ -67,10 +67,17 @@ static int ladder_select_state(struct cpuidle_device *dev)
         struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
         struct ladder_device_state *last_state;
         int last_residency, last_idx = ldev->last_state_idx;
+        int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
 
         if (unlikely(!ldev))
                 return 0;
 
+        /* Special case when user has set very strict latency requirement */
+        if (unlikely(latency_req == 0)) {
+                ladder_do_selection(ldev, last_idx, 0);
+                return 0;
+        }
+
         last_state = &ldev->states[last_idx];
 
         if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID)
@@ -81,8 +88,7 @@ static int ladder_select_state(struct cpuidle_device *dev)
         /* consider promotion */
         if (last_idx < dev->state_count - 1 &&
             last_residency > last_state->threshold.promotion_time &&
-            dev->states[last_idx + 1].exit_latency <=
-                        pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
+            dev->states[last_idx + 1].exit_latency <= latency_req) {
                 last_state->stats.promotion_count++;
                 last_state->stats.demotion_count = 0;
                 if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {
@@ -92,7 +98,19 @@ static int ladder_select_state(struct cpuidle_device *dev)
         }
 
         /* consider demotion */
-        if (last_idx > 0 &&
+        if (last_idx > CPUIDLE_DRIVER_STATE_START &&
+            dev->states[last_idx].exit_latency > latency_req) {
+                int i;
+
+                for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) {
+                        if (dev->states[i].exit_latency <= latency_req)
+                                break;
+                }
+                ladder_do_selection(ldev, last_idx, i);
+                return i;
+        }
+
+        if (last_idx > CPUIDLE_DRIVER_STATE_START &&
             last_residency < last_state->threshold.demotion_time) {
                 last_state->stats.demotion_count++;
                 last_state->stats.promotion_count = 0;
@@ -117,7 +135,7 @@ static int ladder_enable_device(struct cpuidle_device *dev)
         struct ladder_device_state *lstate;
         struct cpuidle_state *state;
 
-        ldev->last_state_idx = 0;
+        ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START;
 
         for (i = 0; i < dev->state_count; i++) {
                 state = &dev->states[i];
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 78d77c5dc35c..8d7cf3f31450 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -34,21 +34,28 @@ static DEFINE_PER_CPU(struct menu_device, menu_devices);
 static int menu_select(struct cpuidle_device *dev)
 {
         struct menu_device *data = &__get_cpu_var(menu_devices);
+        int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
         int i;
 
+        /* Special case when user has set very strict latency requirement */
+        if (unlikely(latency_req == 0)) {
+                data->last_state_idx = 0;
+                return 0;
+        }
+
         /* determine the expected residency time */
         data->expected_us =
                 (u32) ktime_to_ns(tick_nohz_get_sleep_length()) / 1000;
 
         /* find the deepest idle state that satisfies our constraints */
-        for (i = 1; i < dev->state_count; i++) {
+        for (i = CPUIDLE_DRIVER_STATE_START + 1; i < dev->state_count; i++) {
                 struct cpuidle_state *s = &dev->states[i];
 
                 if (s->target_residency > data->expected_us)
                         break;
                 if (s->target_residency > data->predicted_us)
                         break;
-                if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY))
+                if (s->exit_latency > latency_req)
                         break;
         }
 
@@ -67,9 +74,9 @@ static void menu_reflect(struct cpuidle_device *dev)
 {
         struct menu_device *data = &__get_cpu_var(menu_devices);
         int last_idx = data->last_state_idx;
-        unsigned int measured_us =
-                cpuidle_get_last_residency(dev) + data->elapsed_us;
+        unsigned int last_idle_us = cpuidle_get_last_residency(dev);
         struct cpuidle_state *target = &dev->states[last_idx];
+        unsigned int measured_us;
 
         /*
          * Ugh, this idle state doesn't support residency measurements, so we
@@ -77,20 +84,27 @@ static void menu_reflect(struct cpuidle_device *dev)
          * for one full standard timer tick.  However, be aware that this
          * could potentially result in a suboptimal state transition.
          */
-        if (!(target->flags & CPUIDLE_FLAG_TIME_VALID))
-                measured_us = USEC_PER_SEC / HZ;
+        if (unlikely(!(target->flags & CPUIDLE_FLAG_TIME_VALID)))
+                last_idle_us = USEC_PER_SEC / HZ;
+
+        /*
+         * measured_us and elapsed_us are the cumulative idle time, since the
+         * last time we were woken out of idle by an interrupt.
+         */
+        if (data->elapsed_us <= data->elapsed_us + last_idle_us)
+                measured_us = data->elapsed_us + last_idle_us;
+        else
+                measured_us = -1;
+
+        /* Predict time until next break event */
+        data->predicted_us = max(measured_us, data->last_measured_us);
 
-        /* Predict time remaining until next break event */
-        if (measured_us + BREAK_FUZZ < data->expected_us - target->exit_latency) {
-                data->predicted_us = max(measured_us, data->last_measured_us);
+        if (last_idle_us + BREAK_FUZZ <
+            data->expected_us - target->exit_latency) {
                 data->last_measured_us = measured_us;
                 data->elapsed_us = 0;
         } else {
-                if (data->elapsed_us < data->elapsed_us + measured_us)
-                        data->elapsed_us = measured_us;
-                else
-                        data->elapsed_us = -1;
-                data->predicted_us = max(measured_us, data->last_measured_us);
+                data->elapsed_us = measured_us;
         }
 }
 
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 31a0e0b455b6..97b003839fb6 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -21,8 +21,8 @@ static int __init cpuidle_sysfs_setup(char *unused)
 }
 __setup("cpuidle_sysfs_switch", cpuidle_sysfs_setup);
 
-static ssize_t show_available_governors(struct sys_device *dev,
-                struct sysdev_attribute *attr, char *buf)
+static ssize_t show_available_governors(struct sysdev_class *class,
+                                        char *buf)
 {
         ssize_t i = 0;
         struct cpuidle_governor *tmp;
@@ -40,8 +40,8 @@ out:
         return i;
 }
 
-static ssize_t show_current_driver(struct sys_device *dev,
-                struct sysdev_attribute *attr, char *buf)
+static ssize_t show_current_driver(struct sysdev_class *class,
+                                   char *buf)
 {
         ssize_t ret;
 
@@ -55,8 +55,8 @@ static ssize_t show_current_driver(struct sys_device *dev,
         return ret;
 }
 
-static ssize_t show_current_governor(struct sys_device *dev,
-                        struct sysdev_attribute *attr, char *buf)
+static ssize_t show_current_governor(struct sysdev_class *class,
+                                     char *buf)
 {
         ssize_t ret;
 
@@ -70,9 +70,8 @@ static ssize_t show_current_governor(struct sys_device *dev,
         return ret;
 }
 
-static ssize_t store_current_governor(struct sys_device *dev,
-        struct sysdev_attribute *attr,
-        const char *buf, size_t count)
+static ssize_t store_current_governor(struct sysdev_class *class,
+                                      const char *buf, size_t count)
 {
         char gov_name[CPUIDLE_NAME_LEN];
         int ret = -EINVAL;
@@ -104,8 +103,9 @@ static ssize_t store_current_governor(struct sys_device *dev,
                 return count;
 }
 
-static SYSDEV_ATTR(current_driver, 0444, show_current_driver, NULL);
-static SYSDEV_ATTR(current_governor_ro, 0444, show_current_governor, NULL);
+static SYSDEV_CLASS_ATTR(current_driver, 0444, show_current_driver, NULL);
+static SYSDEV_CLASS_ATTR(current_governor_ro, 0444, show_current_governor,
+                         NULL);
 
 static struct attribute *cpuclass_default_attrs[] = {
         &attr_current_driver.attr,
@@ -113,9 +113,10 @@ static struct attribute *cpuclass_default_attrs[] = {
         NULL
 };
 
-static SYSDEV_ATTR(available_governors, 0444, show_available_governors, NULL);
-static SYSDEV_ATTR(current_governor, 0644, show_current_governor,
-        store_current_governor);
+static SYSDEV_CLASS_ATTR(available_governors, 0444, show_available_governors,
+                         NULL);
+static SYSDEV_CLASS_ATTR(current_governor, 0644, show_current_governor,
+                         store_current_governor);
 
 static struct attribute *cpuclass_switch_attrs[] = {
         &attr_available_governors.attr,
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 54a2a166e566..bf2917d197a0 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <asm/byteorder.h>
+#include <asm/i387.h>
 #include "padlock.h"
 
 /* Control word. */
@@ -141,6 +142,12 @@ static inline void padlock_reset_key(void)
         asm volatile ("pushfl; popfl");
 }
 
+/*
+ * While the padlock instructions don't use FP/SSE registers, they
+ * generate a spurious DNA fault when cr0.ts is '1'. These instructions
+ * should be used only inside the irq_ts_save/restore() context
+ */
+
 static inline void padlock_xcrypt(const u8 *input, u8 *output, void *key,
                                   void *control_word)
 {
@@ -205,15 +212,23 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key,
 static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
         struct aes_ctx *ctx = aes_ctx(tfm);
+        int ts_state;
         padlock_reset_key();
+
+        ts_state = irq_ts_save();
         aes_crypt(in, out, ctx->E, &ctx->cword.encrypt);
+        irq_ts_restore(ts_state);
 }
 
 static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
         struct aes_ctx *ctx = aes_ctx(tfm);
+        int ts_state;
         padlock_reset_key();
+
+        ts_state = irq_ts_save();
         aes_crypt(in, out, ctx->D, &ctx->cword.decrypt);
+        irq_ts_restore(ts_state);
 }
 
 static struct crypto_alg aes_alg = {
@@ -244,12 +259,14 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
         struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
         struct blkcipher_walk walk;
         int err;
+        int ts_state;
 
         padlock_reset_key();
 
         blkcipher_walk_init(&walk, dst, src, nbytes);
         err = blkcipher_walk_virt(desc, &walk);
 
+        ts_state = irq_ts_save();
         while ((nbytes = walk.nbytes)) {
                 padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
                                    ctx->E, &ctx->cword.encrypt,
@@ -257,6 +274,7 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
                 nbytes &= AES_BLOCK_SIZE - 1;
                 err = blkcipher_walk_done(desc, &walk, nbytes);
         }
+        irq_ts_restore(ts_state);
 
         return err;
 }
@@ -268,12 +286,14 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
         struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
         struct blkcipher_walk walk;
         int err;
+        int ts_state;
 
         padlock_reset_key();
 
         blkcipher_walk_init(&walk, dst, src, nbytes);
         err = blkcipher_walk_virt(desc, &walk);
 
+        ts_state = irq_ts_save();
         while ((nbytes = walk.nbytes)) {
                 padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
                                    ctx->D, &ctx->cword.decrypt,
@@ -281,7 +301,7 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
                 nbytes &= AES_BLOCK_SIZE - 1;
                 err = blkcipher_walk_done(desc, &walk, nbytes);
         }
-
+        irq_ts_restore(ts_state);
         return err;
 }
 
@@ -314,12 +334,14 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
         struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
         struct blkcipher_walk walk;
         int err;
+        int ts_state;
 
         padlock_reset_key();
 
         blkcipher_walk_init(&walk, dst, src, nbytes);
         err = blkcipher_walk_virt(desc, &walk);
 
+        ts_state = irq_ts_save();
         while ((nbytes = walk.nbytes)) {
                 u8 *iv = padlock_xcrypt_cbc(walk.src.virt.addr,
                                             walk.dst.virt.addr, ctx->E,
@@ -329,6 +351,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
                 nbytes &= AES_BLOCK_SIZE - 1;
                 err = blkcipher_walk_done(desc, &walk, nbytes);
         }
+        irq_ts_restore(ts_state);
 
         return err;
 }
@@ -340,12 +363,14 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
         struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
         struct blkcipher_walk walk;
         int err;
+        int ts_state;
 
         padlock_reset_key();
 
         blkcipher_walk_init(&walk, dst, src, nbytes);
         err = blkcipher_walk_virt(desc, &walk);
 
+        ts_state = irq_ts_save();
         while ((nbytes = walk.nbytes)) {
                 padlock_xcrypt_cbc(walk.src.virt.addr, walk.dst.virt.addr,
                                    ctx->D, walk.iv, &ctx->cword.decrypt,
@@ -354,6 +379,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
                 err = blkcipher_walk_done(desc, &walk, nbytes);
         }
 
+        irq_ts_restore(ts_state);
         return err;
 }
 
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index 40d5680fa013..a7fbadebf623 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/scatterlist.h>
+#include <asm/i387.h>
 #include "padlock.h"
 
 #define SHA1_DEFAULT_FALLBACK   "sha1-generic"
@@ -102,6 +103,7 @@ static void padlock_do_sha1(const char *in, char *out, int count)
          *     PadLock microcode needs it that big. */
         char buf[128+16];
         char *result = NEAREST_ALIGNED(buf);
+        int ts_state;
 
         ((uint32_t *)result)[0] = SHA1_H0;
         ((uint32_t *)result)[1] = SHA1_H1;
@@ -109,9 +111,12 @@ static void padlock_do_sha1(const char *in, char *out, int count)
         ((uint32_t *)result)[3] = SHA1_H3;
         ((uint32_t *)result)[4] = SHA1_H4;
  
+        /* prevent taking the spurious DNA fault with padlock. */
+        ts_state = irq_ts_save();
         asm volatile (".byte 0xf3,0x0f,0xa6,0xc8" /* rep xsha1 */
                       : "+S"(in), "+D"(result)
                       : "c"(count), "a"(0));
+        irq_ts_restore(ts_state);
 
         padlock_output_block((uint32_t *)result, (uint32_t *)out, 5);
 }
@@ -123,6 +128,7 @@ static void padlock_do_sha256(const char *in, char *out, int count)
          *     PadLock microcode needs it that big. */
         char buf[128+16];
         char *result = NEAREST_ALIGNED(buf);
+        int ts_state;
 
         ((uint32_t *)result)[0] = SHA256_H0;
         ((uint32_t *)result)[1] = SHA256_H1;
@@ -133,9 +139,12 @@ static void padlock_do_sha256(const char *in, char *out, int count)
         ((uint32_t *)result)[6] = SHA256_H6;
         ((uint32_t *)result)[7] = SHA256_H7;
 
+        /* prevent taking the spurious DNA fault with padlock. */
+        ts_state = irq_ts_save();
         asm volatile (".byte 0xf3,0x0f,0xa6,0xd0" /* rep xsha256 */
                       : "+S"(in), "+D"(result)
                       : "c"(count), "a"(0));
+        irq_ts_restore(ts_state);
 
         padlock_output_block((uint32_t *)result, (uint32_t *)out, 8);
 }
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 681c15f42083..ee827a7f7c6a 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -96,6 +96,9 @@ struct talitos_private {
         unsigned int exec_units;
         unsigned int desc_types;
 
+        /* SEC Compatibility info */
+        unsigned long features;
+
         /* next channel to be assigned next incoming descriptor */
         atomic_t last_chan;
 
@@ -133,6 +136,9 @@ struct talitos_private {
         struct hwrng rng;
 };
 
+/* .features flag */
+#define TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT 0x00000001
+
 /*
  * map virtual single (contiguous) pointer to h/w descriptor pointer
  */
@@ -785,7 +791,7 @@ static void ipsec_esp_encrypt_done(struct device *dev,
         /* copy the generated ICV to dst */
         if (edesc->dma_len) {
                 icvdata = &edesc->link_tbl[edesc->src_nents +
-                                           edesc->dst_nents + 1];
+                                           edesc->dst_nents + 2];
                 sg = sg_last(areq->dst, edesc->dst_nents);
                 memcpy((char *)sg_virt(sg) + sg->length - ctx->authsize,
                        icvdata, ctx->authsize);
@@ -814,7 +820,7 @@ static void ipsec_esp_decrypt_done(struct device *dev,
                 /* auth check */
                 if (edesc->dma_len)
                         icvdata = &edesc->link_tbl[edesc->src_nents +
-                                                   edesc->dst_nents + 1];
+                                                   edesc->dst_nents + 2];
                 else
                         icvdata = &edesc->link_tbl[0];
 
@@ -921,10 +927,30 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
                 sg_count = sg_to_link_tbl(areq->src, sg_count, cryptlen,
                                           &edesc->link_tbl[0]);
                 if (sg_count > 1) {
+                        struct talitos_ptr *link_tbl_ptr =
+                                &edesc->link_tbl[sg_count-1];
+                        struct scatterlist *sg;
+                        struct talitos_private *priv = dev_get_drvdata(dev);
+
                         desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
                         desc->ptr[4].ptr = cpu_to_be32(edesc->dma_link_tbl);
                         dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
                                                    edesc->dma_len, DMA_BIDIRECTIONAL);
+                        /* If necessary for this SEC revision,
+                         * add a link table entry for ICV.
+                         */
+                        if ((priv->features &
+                             TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT) &&
+                            (edesc->desc.hdr & DESC_HDR_MODE0_ENCRYPT) == 0) {
+                                link_tbl_ptr->j_extent = 0;
+                                link_tbl_ptr++;
+                                link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;
+                                link_tbl_ptr->len = cpu_to_be16(authsize);
+                                sg = sg_last(areq->src, edesc->src_nents ? : 1);
+                                link_tbl_ptr->ptr = cpu_to_be32(
+                                                (char *)sg_dma_address(sg)
+                                                + sg->length - authsize);
+                        }
                 } else {
                         /* Only one segment now, so no link tbl needed */
                         desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
@@ -944,12 +970,11 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
                 desc->ptr[5].ptr = cpu_to_be32(sg_dma_address(areq->dst));
         } else {
                 struct talitos_ptr *link_tbl_ptr =
-                        &edesc->link_tbl[edesc->src_nents];
-                struct scatterlist *sg;
+                        &edesc->link_tbl[edesc->src_nents + 1];
 
                 desc->ptr[5].ptr = cpu_to_be32((struct talitos_ptr *)
                                                edesc->dma_link_tbl +
-                                               edesc->src_nents);
+                                               edesc->src_nents + 1);
                 if (areq->src == areq->dst) {
                         memcpy(link_tbl_ptr, &edesc->link_tbl[0],
                                edesc->src_nents * sizeof(struct talitos_ptr));
@@ -957,14 +982,10 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
                         sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
                                                   link_tbl_ptr);
                 }
+                /* Add an entry to the link table for ICV data */
                 link_tbl_ptr += sg_count - 1;
-
-                /* handle case where sg_last contains the ICV exclusively */
-                sg = sg_last(areq->dst, edesc->dst_nents);
-                if (sg->length == ctx->authsize)
-                        link_tbl_ptr--;
-
                 link_tbl_ptr->j_extent = 0;
+                sg_count++;
                 link_tbl_ptr++;
                 link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;
                 link_tbl_ptr->len = cpu_to_be16(authsize);
@@ -973,7 +994,7 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
                 link_tbl_ptr->ptr = cpu_to_be32((struct talitos_ptr *)
                                                 edesc->dma_link_tbl +
                                                 edesc->src_nents +
-                                                edesc->dst_nents + 1);
+                                                edesc->dst_nents + 2);
 
                 desc->ptr[5].j_extent |= DESC_PTR_LNKTBL_JUMP;
                 dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
@@ -1040,12 +1061,12 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 
         /*
          * allocate space for base edesc plus the link tables,
-         * allowing for a separate entry for the generated ICV (+ 1),
+         * allowing for two separate entries for ICV and generated ICV (+ 2),
          * and the ICV data itself
          */
         alloc_len = sizeof(struct ipsec_esp_edesc);
         if (src_nents || dst_nents) {
-                dma_len = (src_nents + dst_nents + 1) *
+                dma_len = (src_nents + dst_nents + 2) *
                                  sizeof(struct talitos_ptr) + ctx->authsize;
                 alloc_len += dma_len;
         } else {
@@ -1104,7 +1125,7 @@ static int aead_authenc_decrypt(struct aead_request *req)
         /* stash incoming ICV for later cmp with ICV generated by the h/w */
         if (edesc->dma_len)
                 icvdata = &edesc->link_tbl[edesc->src_nents +
-                                           edesc->dst_nents + 1];
+                                           edesc->dst_nents + 2];
         else
                 icvdata = &edesc->link_tbl[0];
 
@@ -1480,6 +1501,9 @@ static int talitos_probe(struct of_device *ofdev,
                 goto err_out;
         }
 
+        if (of_device_is_compatible(np, "fsl,sec3.0"))
+                priv->features |= TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT;
+
         priv->head_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
                                   GFP_KERNEL);
         priv->tail_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index a4e4494663bf..0328da020a10 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/memory.h>
-#include <asm/plat-orion/mv_xor.h>
+#include <plat/mv_xor.h>
 #include "mv_xor.h"
 
 static void mv_xor_issue_pending(struct dma_chan *chan);
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 001622eb86f9..3bf8ee120d42 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -84,20 +84,23 @@ static struct kobj_type memmap_ktype = {
  */
 
 /*
- * Firmware memory map entries
+ * Firmware memory map entries. No locking is needed because the
+ * firmware_map_add() and firmware_map_add_early() functions are called
+ * in firmware initialisation code in one single thread of execution.
  */
 static LIST_HEAD(map_entries);
 
 /**
- * Common implementation of firmware_map_add() and firmware_map_add_early()
- * which expects a pre-allocated struct firmware_map_entry.
- *
+ * firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
  * @start: Start of the memory range.
  * @end:   End of the memory range (inclusive).
  * @type:  Type of the memory range.
  * @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
  *         entry.
- */
+ *
+ * Common implementation of firmware_map_add() and firmware_map_add_early()
+ * which expects a pre-allocated struct firmware_map_entry.
+ **/
 static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
                                   const char *type,
                                   struct firmware_map_entry *entry)
@@ -115,33 +118,52 @@ static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
         return 0;
 }
 
-/*
- * See <linux/firmware-map.h> for documentation.
- */
+/**
+ * firmware_map_add() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * This function uses kmalloc() for memory
+ * allocation. Use firmware_map_add_early() if you want to use the bootmem
+ * allocator.
+ *
+ * That function must be called before late_initcall.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
 int firmware_map_add(resource_size_t start, resource_size_t end,
                      const char *type)
 {
         struct firmware_map_entry *entry;
 
         entry = kmalloc(sizeof(struct firmware_map_entry), GFP_ATOMIC);
-        WARN_ON(!entry);
         if (!entry)
                 return -ENOMEM;
 
         return firmware_map_add_entry(start, end, type, entry);
 }
 
-/*
- * See <linux/firmware-map.h> for documentation.
- */
+/**
+ * firmware_map_add_early() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function uses the bootmem allocator
+ * for memory allocation. Use firmware_map_add() if you want to use kmalloc().
+ *
+ * That function must be called before late_initcall.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
 int __init firmware_map_add_early(resource_size_t start, resource_size_t end,
                                   const char *type)
 {
         struct firmware_map_entry *entry;
 
         entry = alloc_bootmem_low(sizeof(struct firmware_map_entry));
-        WARN_ON(!entry);
-        if (!entry)
+        if (WARN_ON(!entry))
                 return -ENOMEM;
 
         return firmware_map_add_entry(start, end, type, entry);
@@ -183,7 +205,10 @@ static ssize_t memmap_attr_show(struct kobject *kobj,
 /*
  * Initialises stuff and adds the entries in the map_entries list to
  * sysfs. Important is that firmware_map_add() and firmware_map_add_early()
- * must be called before late_initcall.
+ * must be called before late_initcall. That's just because that function
+ * is called as late_initcall() function, which means that if you call
+ * firmware_map_add() or firmware_map_add_early() afterwards, the entries
+ * are not added to sysfs.
  */
 static int __init memmap_init(void)
 {
@@ -192,13 +217,13 @@ static int __init memmap_init(void)
         struct kset *memmap_kset;
 
         memmap_kset = kset_create_and_add("memmap", NULL, firmware_kobj);
-        WARN_ON(!memmap_kset);
-        if (!memmap_kset)
+        if (WARN_ON(!memmap_kset))
                 return -ENOMEM;
 
         list_for_each_entry(entry, &map_entries, list) {
                 entry->kobj.kset = memmap_kset;
-                kobject_add(&entry->kobj, NULL, "%d", i++);
+                if (kobject_add(&entry->kobj, NULL, "%d", i++))
+                        kobject_put(&entry->kobj);
         }
 
         return 0;
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 61e78a4369b9..b15f88249639 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -654,12 +654,12 @@ static const struct hid_blacklist {
         { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
         { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
         { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
-        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN },
-        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
-        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN },
-        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN },
-        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
-        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE},
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN  | HID_QUIRK_IGNORE_MOUSE },
         { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
         { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index bf4ebfb86fa5..d402e8d813ce 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -77,6 +77,22 @@ config SENSORS_AD7418
           This driver can also be built as a module. If so, the module
           will be called ad7418.
 
+config SENSORS_ADCXX
+        tristate "National Semiconductor ADCxxxSxxx"
+        depends on SPI_MASTER && EXPERIMENTAL
+        help
+          If you say yes here you get support for the National Semiconductor
+          ADC<bb><c>S<sss> chip family, where
+          * bb  is the resolution in number of bits (8, 10, 12)
+          * c   is the number of channels (1, 2, 4, 8)
+          * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+            kSPS and 101 for 1 MSPS)
+
+          Examples : ADC081S101, ADC124S501, ...
+
+          This driver can also be built as a module.  If so, the module
+          will be called adcxx.
+
 config SENSORS_ADM1021
         tristate "Analog Devices ADM1021 and compatibles"
         depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 7943e5cefb06..950134ab8426 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_SENSORS_ABITUGURU)	+= abituguru.o
 obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
 obj-$(CONFIG_SENSORS_AD7414)    += ad7414.o
 obj-$(CONFIG_SENSORS_AD7418)    += ad7418.o
+obj-$(CONFIG_SENSORS_ADCXX)     += adcxx.o
 obj-$(CONFIG_SENSORS_ADM1021)   += adm1021.o
 obj-$(CONFIG_SENSORS_ADM1025)   += adm1025.o
 obj-$(CONFIG_SENSORS_ADM1026)   += adm1026.o
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index f00f497b9ca9..d568c65c1370 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -1,5 +1,8 @@
 /*
-    abituguru3.c Copyright (c) 2006 Hans de Goede <j.w.r.degoede@hhs.nl>
+    abituguru3.c
+
+    Copyright (c) 2006-2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+    Copyright (c) 2008 Alistair John Strachan <alistair@devzero.co.uk>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -116,7 +119,7 @@ struct abituguru3_sensor_info {
 
 struct abituguru3_motherboard_info {
         u16 id;
-        const char *name;
+        const char *dmi_name;
         /* + 1 -> end of sensors indicated by a sensor with name == NULL */
         struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
 };
@@ -161,7 +164,7 @@ struct abituguru3_data {
 
 /* Constants */
 static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
-        { 0x000C, "unknown", {
+        { 0x000C, NULL /* Unknown, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 10, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -183,7 +186,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX1 Fan",           35, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x000D, "Abit AW8", {
+        { 0x000D, NULL /* Abit AW8, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 10, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -212,7 +215,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX5 Fan",           39, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x000E, "AL-8", {
+        { 0x000E, NULL /* AL-8, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 10, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -233,7 +236,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "SYS Fan",            34, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x000F, "unknown", {
+        { 0x000F, NULL /* Unknown, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 10, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -254,7 +257,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "SYS Fan",            34, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0010, "Abit NI8 SLI GR", {
+        { 0x0010, NULL /* Abit NI8 SLI GR, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 10, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -276,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "OTES1 Fan",          36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0011, "Abit AT8 32X", {
+        { 0x0011, NULL /* Abit AT8 32X, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 20, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -302,7 +305,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX2 Fan",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0012, "Abit AN8 32X", {
+        { 0x0012, NULL /* Abit AN8 32X, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 20, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -324,7 +327,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX1 Fan",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0013, "Abit AW8D", {
+        { 0x0013, NULL /* Abit AW8D, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 10, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -353,7 +356,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX5 Fan",           39, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0014, "Abit AB9 Pro", {
+        { 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 10, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -374,7 +377,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "SYS Fan",            34, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0015, "unknown", {
+        { 0x0015, NULL /* Unknown, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 20, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -398,7 +401,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 Fan",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0016, "AW9D-MAX", {
+        { 0x0016, NULL /* AW9D-MAX, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
@@ -426,7 +429,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "OTES1 Fan",          38, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0017, "unknown", {
+        { 0x0017, NULL /* Unknown, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
@@ -451,7 +454,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 FAN",           37, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0018, "unknown", {
+        { 0x0018, NULL /* Unknown, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
@@ -478,7 +481,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 Fan",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0019, "unknown", {
+        { 0x0019, NULL /* Unknown, need DMI string */, {
                 { "CPU Core",            7, 0, 10, 1, 0 },
                 { "DDR2",               13, 0, 20, 1, 0 },
                 { "DDR2 VTT",           14, 0, 10, 1, 0 },
@@ -505,7 +508,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 FAN",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x001A, "Abit IP35 Pro", {
+        { 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
@@ -533,7 +536,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX4 Fan",           37, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x001B, "unknown", {
+        { 0x001B, NULL /* Unknown, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR3",                1, 0, 20, 1, 0 },
                 { "DDR3 VTT",            2, 0, 10, 1, 0 },
@@ -560,7 +563,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 Fan",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x001C, "unknown", {
+        { 0x001C, NULL /* Unknown, need DMI string */, {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
@@ -935,9 +938,18 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
                 goto abituguru3_probe_error;
         }
         data->sensors = abituguru3_motherboards[i].sensors;
+
         printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
-                "ID: %04X (%s)\n", (unsigned int)id,
-                abituguru3_motherboards[i].name);
+                "ID: %04X\n", (unsigned int)id);
+
+#ifdef CONFIG_DMI
+        if (!abituguru3_motherboards[i].dmi_name) {
+                printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
+                        "not detected using DMI. Please send the output of "
+                        "\"dmidecode\" to the abituguru3 maintainer"
+                        "(see MAINTAINERS)\n");
+        }
+#endif
 
         /* Fill the sysfs attr array */
         sysfs_attr_i = 0;
@@ -1109,6 +1121,46 @@ static struct platform_driver abituguru3_driver = {
         .resume = abituguru3_resume
 };
 
+#ifdef CONFIG_DMI
+
+static int __init abituguru3_dmi_detect(void)
+{
+        const char *board_vendor, *board_name;
+        int i, err = (force) ? 1 : -ENODEV;
+
+        board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+        if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
+                return err;
+
+        board_name = dmi_get_system_info(DMI_BOARD_NAME);
+        if (!board_name)
+                return err;
+
+        for (i = 0; abituguru3_motherboards[i].id; i++) {
+                const char *dmi_name = abituguru3_motherboards[i].dmi_name;
+                if (dmi_name && !strcmp(dmi_name, board_name))
+                        break;
+        }
+
+        if (!abituguru3_motherboards[i].id)
+                return 1;
+
+        return 0;
+}
+
+#else /* !CONFIG_DMI */
+
+static inline int abituguru3_dmi_detect(void)
+{
+        return -ENODEV;
+}
+
+#endif /* CONFIG_DMI */
+
+/* FIXME: Manual detection should die eventually; we need to collect stable
+ *        DMI model names first before we can rely entirely on CONFIG_DMI.
+ */
+
 static int __init abituguru3_detect(void)
 {
         /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
@@ -1119,7 +1171,7 @@ static int __init abituguru3_detect(void)
         if (((data_val == 0x00) || (data_val == 0x08)) &&
                         ((cmd_val == 0xAC) || (cmd_val == 0x05) ||
                          (cmd_val == 0x55)))
-                return ABIT_UGURU3_BASE;
+                return 0;
 
         ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
                 "0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
@@ -1127,7 +1179,7 @@ static int __init abituguru3_detect(void)
         if (force) {
                 printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
                                 "present because of \"force\" parameter\n");
-                return ABIT_UGURU3_BASE;
+                return 0;
         }
 
         /* No uGuru3 found */
@@ -1138,27 +1190,29 @@ static struct platform_device *abituguru3_pdev;
 
 static int __init abituguru3_init(void)
 {
-        int address, err;
         struct resource res = { .flags = IORESOURCE_IO };
-
-#ifdef CONFIG_DMI
-        const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-
-        /* safety check, refuse to load on non Abit motherboards */
-        if (!force && (!board_vendor ||
-                        strcmp(board_vendor, "http://www.abit.com.tw/")))
-                return -ENODEV;
-#endif
-
-        address = abituguru3_detect();
-        if (address < 0)
-                return address;
+        int err;
+
+        /* Attempt DMI detection first */
+        err = abituguru3_dmi_detect();
+        if (err < 0)
+                return err;
+
+        /* Fall back to manual detection if there was no exact
+         * board name match, or force was specified.
+         */
+        if (err > 0) {
+                err = abituguru3_detect();
+                if (err)
+                        return err;
+        }
 
         err = platform_driver_register(&abituguru3_driver);
         if (err)
                 goto exit;
 
-        abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, address);
+        abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME,
+                                                ABIT_UGURU3_BASE);
         if (!abituguru3_pdev) {
                 printk(KERN_ERR ABIT_UGURU3_NAME
                         ": Device allocation failed\n");
@@ -1166,8 +1220,8 @@ static int __init abituguru3_init(void)
                 goto exit_driver_unregister;
         }
 
-        res.start = address;
-        res.end = address + ABIT_UGURU3_REGION_LENGTH - 1;
+        res.start = ABIT_UGURU3_BASE;
+        res.end = ABIT_UGURU3_BASE + ABIT_UGURU3_REGION_LENGTH - 1;
         res.name = ABIT_UGURU3_NAME;
 
         err = platform_device_add_resources(abituguru3_pdev, &res, 1);
diff --git a/drivers/hwmon/adcxx.c b/drivers/hwmon/adcxx.c
new file mode 100644
index 000000000000..242294db3db6
--- /dev/null
+++ b/drivers/hwmon/adcxx.c
@@ -0,0 +1,329 @@
+/*
+ * adcxx.c
+ *
+ * The adcxx4s is an AD converter family from National Semiconductor (NS).
+ *
+ * Copyright (c) 2008 Marc Pignat <marc.pignat@hevs.ch>
+ *
+ * The adcxx4s communicates with a host processor via an SPI/Microwire Bus
+ * interface. This driver supports the whole family of devices with name
+ * ADC<bb><c>S<sss>, where
+ * * bb is the resolution in number of bits (8, 10, 12)
+ * * c is the number of channels (1, 2, 4, 8)
+ * * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS
+ *   and 101 for 1 MSPS)
+ *
+ * Complete datasheets are available at National's website here:
+ * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf
+ *
+ * Handling of 8, 10 and 12 bits converters are the same, the
+ * unavailable bits are 0 :)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+
+#define DRVNAME         "adcxx"
+
+struct adcxx {
+        struct device *hwmon_dev;
+        struct mutex lock;
+        u32 channels;
+        u32 reference; /* in millivolts */
+};
+
+/* sysfs hook function */
+static ssize_t adcxx_read(struct device *dev,
+                struct device_attribute *devattr, char *buf)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adcxx *adc = dev_get_drvdata(&spi->dev);
+        u8 tx_buf[2] = { attr->index << 3 }; /* other bits are don't care */
+        u8 rx_buf[2];
+        int status;
+        int value;
+
+        if (mutex_lock_interruptible(&adc->lock))
+                return -ERESTARTSYS;
+
+        status = spi_write_then_read(spi, tx_buf, sizeof(tx_buf),
+                                        rx_buf, sizeof(rx_buf));
+        if (status < 0) {
+                dev_warn(dev, "spi_write_then_read failed with status %d\n",
+                                status);
+                goto out;
+        }
+
+        value = (rx_buf[0] << 8) + rx_buf[1];
+        dev_dbg(dev, "raw value = 0x%x\n", value);
+
+        value = value * adc->reference >> 12;
+        status = sprintf(buf, "%d\n", value);
+out:
+        mutex_unlock(&adc->lock);
+        return status;
+}
+
+static ssize_t adcxx_show_min(struct device *dev,
+                struct device_attribute *devattr, char *buf)
+{
+        /* The minimum reference is 0 for this chip family */
+        return sprintf(buf, "0\n");
+}
+
+static ssize_t adcxx_show_max(struct device *dev,
+                struct device_attribute *devattr, char *buf)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        struct adcxx *adc = dev_get_drvdata(&spi->dev);
+        u32 reference;
+
+        if (mutex_lock_interruptible(&adc->lock))
+                return -ERESTARTSYS;
+
+        reference = adc->reference;
+
+        mutex_unlock(&adc->lock);
+
+        return sprintf(buf, "%d\n", reference);
+}
+
+static ssize_t adcxx_set_max(struct device *dev,
+        struct device_attribute *devattr, const char *buf, size_t count)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        struct adcxx *adc = dev_get_drvdata(&spi->dev);
+        unsigned long value;
+
+        if (strict_strtoul(buf, 10, &value))
+                return -EINVAL;
+
+        if (mutex_lock_interruptible(&adc->lock))
+                return -ERESTARTSYS;
+
+        adc->reference = value;
+
+        mutex_unlock(&adc->lock);
+
+        return count;
+}
+
+static ssize_t adcxx_show_name(struct device *dev, struct device_attribute
+                              *devattr, char *buf)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        struct adcxx *adc = dev_get_drvdata(&spi->dev);
+
+        return sprintf(buf, "adcxx%ds\n", adc->channels);
+}
+
+static struct sensor_device_attribute ad_input[] = {
+        SENSOR_ATTR(name, S_IRUGO, adcxx_show_name, NULL, 0),
+        SENSOR_ATTR(in_min, S_IRUGO, adcxx_show_min, NULL, 0),
+        SENSOR_ATTR(in_max, S_IWUSR | S_IRUGO, adcxx_show_max,
+                                        adcxx_set_max, 0),
+        SENSOR_ATTR(in0_input, S_IRUGO, adcxx_read, NULL, 0),
+        SENSOR_ATTR(in1_input, S_IRUGO, adcxx_read, NULL, 1),
+        SENSOR_ATTR(in2_input, S_IRUGO, adcxx_read, NULL, 2),
+        SENSOR_ATTR(in3_input, S_IRUGO, adcxx_read, NULL, 3),
+        SENSOR_ATTR(in4_input, S_IRUGO, adcxx_read, NULL, 4),
+        SENSOR_ATTR(in5_input, S_IRUGO, adcxx_read, NULL, 5),
+        SENSOR_ATTR(in6_input, S_IRUGO, adcxx_read, NULL, 6),
+        SENSOR_ATTR(in7_input, S_IRUGO, adcxx_read, NULL, 7),
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit adcxx_probe(struct spi_device *spi, int channels)
+{
+        struct adcxx *adc;
+        int status;
+        int i;
+
+        adc = kzalloc(sizeof *adc, GFP_KERNEL);
+        if (!adc)
+                return -ENOMEM;
+
+        /* set a default value for the reference */
+        adc->reference = 3300;
+        adc->channels = channels;
+        mutex_init(&adc->lock);
+
+        mutex_lock(&adc->lock);
+
+        dev_set_drvdata(&spi->dev, adc);
+
+        for (i = 0; i < 3 + adc->channels; i++) {
+                status = device_create_file(&spi->dev, &ad_input[i].dev_attr);
+                if (status) {
+                        dev_err(&spi->dev, "device_create_file failed.\n");
+                        goto out_err;
+                }
+        }
+
+        adc->hwmon_dev = hwmon_device_register(&spi->dev);
+        if (IS_ERR(adc->hwmon_dev)) {
+                dev_err(&spi->dev, "hwmon_device_register failed.\n");
+                status = PTR_ERR(adc->hwmon_dev);
+                goto out_err;
+        }
+
+        mutex_unlock(&adc->lock);
+        return 0;
+
+out_err:
+        for (i--; i >= 0; i--)
+                device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+        dev_set_drvdata(&spi->dev, NULL);
+        mutex_unlock(&adc->lock);
+        kfree(adc);
+        return status;
+}
+
+static int __devinit adcxx1s_probe(struct spi_device *spi)
+{
+        return adcxx_probe(spi, 1);
+}
+
+static int __devinit adcxx2s_probe(struct spi_device *spi)
+{
+        return adcxx_probe(spi, 2);
+}
+
+static int __devinit adcxx4s_probe(struct spi_device *spi)
+{
+        return adcxx_probe(spi, 4);
+}
+
+static int __devinit adcxx8s_probe(struct spi_device *spi)
+{
+        return adcxx_probe(spi, 8);
+}
+
+static int __devexit adcxx_remove(struct spi_device *spi)
+{
+        struct adcxx *adc = dev_get_drvdata(&spi->dev);
+        int i;
+
+        mutex_lock(&adc->lock);
+        hwmon_device_unregister(adc->hwmon_dev);
+        for (i = 0; i < 3 + adc->channels; i++)
+                device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+        dev_set_drvdata(&spi->dev, NULL);
+        mutex_unlock(&adc->lock);
+        kfree(adc);
+
+        return 0;
+}
+
+static struct spi_driver adcxx1s_driver = {
+        .driver = {
+                .name   = "adcxx1s",
+                .owner  = THIS_MODULE,
+        },
+        .probe  = adcxx1s_probe,
+        .remove = __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx2s_driver = {
+        .driver = {
+                .name   = "adcxx2s",
+                .owner  = THIS_MODULE,
+        },
+        .probe  = adcxx2s_probe,
+        .remove = __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx4s_driver = {
+        .driver = {
+                .name   = "adcxx4s",
+                .owner  = THIS_MODULE,
+        },
+        .probe  = adcxx4s_probe,
+        .remove = __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx8s_driver = {
+        .driver = {
+                .name   = "adcxx8s",
+                .owner  = THIS_MODULE,
+        },
+        .probe  = adcxx8s_probe,
+        .remove = __devexit_p(adcxx_remove),
+};
+
+static int __init init_adcxx(void)
+{
+        int status;
+        status = spi_register_driver(&adcxx1s_driver);
+        if (status)
+                goto reg_1_failed;
+
+        status = spi_register_driver(&adcxx2s_driver);
+        if (status)
+                goto reg_2_failed;
+
+        status = spi_register_driver(&adcxx4s_driver);
+        if (status)
+                goto reg_4_failed;
+
+        status = spi_register_driver(&adcxx8s_driver);
+        if (status)
+                goto reg_8_failed;
+
+        return status;
+
+reg_8_failed:
+        spi_unregister_driver(&adcxx4s_driver);
+reg_4_failed:
+        spi_unregister_driver(&adcxx2s_driver);
+reg_2_failed:
+        spi_unregister_driver(&adcxx1s_driver);
+reg_1_failed:
+        return status;
+}
+
+static void __exit exit_adcxx(void)
+{
+        spi_unregister_driver(&adcxx1s_driver);
+        spi_unregister_driver(&adcxx2s_driver);
+        spi_unregister_driver(&adcxx4s_driver);
+        spi_unregister_driver(&adcxx8s_driver);
+}
+
+module_init(init_adcxx);
+module_exit(exit_adcxx);
+
+MODULE_AUTHOR("Marc Pignat");
+MODULE_DESCRIPTION("National Semiconductor adcxx8sxxx Linux driver");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("adcxx1s");
+MODULE_ALIAS("adcxx2s");
+MODULE_ALIAS("adcxx4s");
+MODULE_ALIAS("adcxx8s");
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index aacc0c4b809c..b06b8e090a27 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -98,6 +98,12 @@ static const char* temperature_sensors_sets[][36] = {
           "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
           "TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P",
           "TM9S", "TN0H", "TS0C", NULL },
+/* Set 5: iMac */
+        { "TC0D", "TA0P", "TG0P", "TG0D", "TG0H", "TH0P", "Tm0P", "TO0P",
+          "Tp0C", NULL },
+/* Set 6: Macbook3 set */
+        { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TTF0", "TW0P", "Th0H",
+          "Th0S", "Th1H", NULL },
 };
 
 /* List of keys used to read/write fan speeds */
@@ -1223,6 +1229,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
         { .accelerometer = 0, .light = 0, .temperature_set = 3 },
 /* MacPro: temperature set 4 */
         { .accelerometer = 0, .light = 0, .temperature_set = 4 },
+/* iMac: temperature set 5 */
+        { .accelerometer = 0, .light = 0, .temperature_set = 5 },
+/* MacBook3: accelerometer and temperature set 6 */
+        { .accelerometer = 1, .light = 0, .temperature_set = 6 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1232,10 +1242,14 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
           DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
           DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
                 (void*)&applesmc_dmi_data[0]},
-        { applesmc_dmi_match, "Apple MacBook", {
+        { applesmc_dmi_match, "Apple MacBook (v2)", {
           DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
           DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
                 (void*)&applesmc_dmi_data[1]},
+        { applesmc_dmi_match, "Apple MacBook (v3)", {
+          DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+          DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
+                (void*)&applesmc_dmi_data[6]},
         { applesmc_dmi_match, "Apple MacBook", {
           DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
           DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
@@ -1248,6 +1262,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
           DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
           DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
                 (void*)&applesmc_dmi_data[4]},
+        { applesmc_dmi_match, "Apple iMac", {
+          DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+          DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
+                (void*)&applesmc_dmi_data[5]},
         { .ident = NULL }
 };
 
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 70239acecc8e..93c17223b527 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -413,10 +413,11 @@ static int __init coretemp_init(void)
         for_each_online_cpu(i) {
                 struct cpuinfo_x86 *c = &cpu_data(i);
 
-                /* check if family 6, models 0xe, 0xf, 0x16, 0x17 */
+                /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
                 if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
                     !((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
-                        (c->x86_model == 0x16) || (c->x86_model == 0x17))) {
+                        (c->x86_model == 0x16) || (c->x86_model == 0x17) ||
+                        (c->x86_model == 0x1A))) {
 
                         /* supported CPU not found, but report the unknown
                            family 6 CPU */
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 7b0a32c4dcfb..c54eff92be4a 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -37,13 +37,21 @@
  * For VRD 10.0 and up, "VRD x.y Design Guide",
  * available at http://developer.intel.com/.
  *
- * AMD NPT 0Fh (Athlon64 & Opteron), AMD Publication 32559,
+ * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * Table 74. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 24 in the functions below.
+ * These CPU models (K8 revision <= E) have 5 VID pins. See also:
+ * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
+ *
+ * AMD NPT Family 0Fh Processors, AMD Publication 32559,
  * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
  * Table 71. VID Code Voltages
- * AMD Opteron processors don't follow the Intel specifications.
- * I'm going to "make up" 2.4 as the spec number for the Opterons.
- * No good reason just a mnemonic for the 24x Opteron processor
- * series.
+ * This corresponds to an arbitrary VRM code of 25 in the functions below.
+ * These CPU models (K8 revision >= F) have 6 VID pins. See also:
+ * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
  *
  * The 17 specification is in fact Intel Mobile Voltage Positioning -
  * (IMVP-II). You can find more information in the datasheet of Max1718
@@ -95,7 +103,12 @@ int vid_from_reg(int val, u8 vrm)
                         return 0;
                 return((1600000 - (val - 2) * 6250 + 500) / 1000);
 
-        case 24:                /* AMD NPT 0Fh (Athlon64 & Opteron) */
+        case 24:                /* Athlon64 & Opteron */
+                val &= 0x1f;
+                if (val == 0x1f)
+                        return 0;
+                                /* fall through */
+        case 25:                /* AMD NPT 0Fh */
                 val &= 0x3f;
                 return (val < 32) ? 1550 - 25 * val
                         : 775 - (25 * (val - 31)) / 2;
@@ -157,11 +170,16 @@ struct vrm_model {
 
 #ifdef CONFIG_X86
 
-/* the stepping parameter is highest acceptable stepping for current line */
+/*
+ * The stepping parameter is highest acceptable stepping for current line.
+ * The model match must be exact for 4-bit values. For model values 0x10
+ * and above (extended model), all models below the parameter will match.
+ */
 
 static struct vrm_model vrm_models[] = {
         {X86_VENDOR_AMD, 0x6, ANY, ANY, 90},            /* Athlon Duron etc */
-        {X86_VENDOR_AMD, 0xF, ANY, ANY, 24},            /* Athlon 64, Opteron and above VRM 24 */
+        {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24},           /* Athlon 64, Opteron */
+        {X86_VENDOR_AMD, 0xF, ANY, ANY, 25},            /* NPT family 0Fh */
         {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13},          /* Pentium M (130 nm) */
         {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85},          /* Tualatin */
         {X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13},          /* Pentium M (90 nm) */
@@ -189,6 +207,8 @@ static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
                 if (vrm_models[i].vendor==vendor)
                         if ((vrm_models[i].eff_family==eff_family)
                          && ((vrm_models[i].eff_model==eff_model) ||
+                             (vrm_models[i].eff_model >= 0x10 &&
+                              eff_model <= vrm_models[i].eff_model) ||
                              (vrm_models[i].eff_model==ANY)) &&
                              (eff_stepping <= vrm_models[i].eff_stepping))
                                 return vrm_models[i].vrm_type;
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index f9e2ed621f7b..2ede9388096b 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -81,6 +81,8 @@ static unsigned long amb_reg_temp(unsigned int amb)
 #define MAX_AMBS_PER_CHANNEL            16
 #define MAX_AMBS                        (MAX_MEM_CHANNELS * \
                                          MAX_AMBS_PER_CHANNEL)
+#define CHANNEL_SHIFT                   4
+#define DIMM_MASK                       0xF
 /*
  * Ugly hack: For some reason the highest bit is set if there
  * are _any_ DIMMs in the channel.  Attempting to read from
@@ -89,7 +91,7 @@ static unsigned long amb_reg_temp(unsigned int amb)
  * might prevent us from seeing the 16th DIMM in the channel.
  */
 #define REAL_MAX_AMBS_PER_CHANNEL       15
-#define KNOBS_PER_AMB                   5
+#define KNOBS_PER_AMB                   6
 
 static unsigned long amb_num_from_reg(unsigned int byte_num, unsigned int bit)
 {
@@ -238,6 +240,16 @@ static ssize_t show_amb_temp(struct device *dev,
                 500 * amb_read_byte(data, amb_reg_temp(attr->index)));
 }
 
+static ssize_t show_label(struct device *dev,
+                          struct device_attribute *devattr,
+                          char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+        return sprintf(buf, "Ch. %d DIMM %d\n", attr->index >> CHANNEL_SHIFT,
+                       attr->index & DIMM_MASK);
+}
+
 static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 {
         int i, j, k, d = 0;
@@ -268,6 +280,20 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
                                 continue;
                         d++;
 
+                        /* sysfs label */
+                        iattr = data->attrs + data->num_attrs;
+                        snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+                                 "temp%d_label", d);
+                        iattr->s_attr.dev_attr.attr.name = iattr->name;
+                        iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
+                        iattr->s_attr.dev_attr.show = show_label;
+                        iattr->s_attr.index = k;
+                        res = device_create_file(&pdev->dev,
+                                                 &iattr->s_attr.dev_attr);
+                        if (res)
+                                goto exit_remove;
+                        data->num_attrs++;
+
                         /* Temperature sysfs knob */
                         iattr = data->attrs + data->num_attrs;
                         snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index c9416e657487..0f70dc204105 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -1,6 +1,6 @@
 /*
- * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
- * and capping functionality.
+ * A hwmon driver for the IBM System Director Active Energy Manager (AEM)
+ * temperature/power/energy sensors and capping functionality.
  * Copyright (C) 2008 IBM
  *
  * Author: Darrick J. Wong <djwong@us.ibm.com>
@@ -463,12 +463,18 @@ static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
 }
 
 /* Update AEM energy registers */
+static void update_aem_energy_one(struct aem_data *data, int which)
+{
+        aem_read_sensor(data, AEM_ENERGY_ELEMENT, which,
+                        &data->energy[which], 8);
+}
+
 static void update_aem_energy(struct aem_data *data)
 {
-        aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+        update_aem_energy_one(data, 0);
         if (data->ver_major < 2)
                 return;
-        aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+        update_aem_energy_one(data, 1);
 }
 
 /* Update all AEM1 sensors */
@@ -676,7 +682,8 @@ static int aem_find_aem2(struct aem_ipmi_data *data,
                 return -ETIMEDOUT;
 
         if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
-            memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+            memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)) ||
+            fi_resp->num_instances <= instance_num)
                 return -ENOENT;
 
         return 0;
@@ -849,7 +856,7 @@ static ssize_t aem_show_power(struct device *dev,
         struct timespec b, a;
 
         mutex_lock(&data->lock);
-        update_aem_energy(data);
+        update_aem_energy_one(data, attr->index);
         getnstimeofday(&b);
         before = data->energy[attr->index];
 
@@ -861,7 +868,7 @@ static ssize_t aem_show_power(struct device *dev,
                 return 0;
         }
 
-        update_aem_energy(data);
+        update_aem_energy_one(data, attr->index);
         getnstimeofday(&a);
         after = data->energy[attr->index];
         mutex_unlock(&data->lock);
@@ -880,7 +887,9 @@ static ssize_t aem_show_energy(struct device *dev,
 {
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct aem_data *a = dev_get_drvdata(dev);
-        a->update(a);
+        mutex_lock(&a->lock);
+        update_aem_energy_one(a, attr->index);
+        mutex_unlock(&a->lock);
 
         return sprintf(buf, "%llu\n",
                         (unsigned long long)a->energy[attr->index] * 1000);
@@ -1104,7 +1113,7 @@ static void __exit aem_exit(void)
 }
 
 MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
-MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_DESCRIPTION("IBM AEM power/temp/energy sensor driver");
 MODULE_LICENSE("GPL");
 
 module_init(aem_init);
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index daa7d121483b..de21142d106c 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -1055,9 +1055,10 @@ static int w83791d_probe(struct i2c_client *client,
 {
         struct w83791d_data *data;
         struct device *dev = &client->dev;
-        int i, val1, err;
+        int i, err;
 
 #ifdef DEBUG
+        int val1;
         val1 = w83791d_read(client, W83791D_REG_DID_VID4);
         dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n",
                         (val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1);
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 18355ae2155d..4655b794ebe3 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -1593,7 +1593,7 @@ fail1:
         if (machine_is_omap_h2()) {
                 /* full speed signaling by default */
                 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
-                        MC1_SPEED_REG);
+                        MC1_SPEED);
                 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
                         MC2_SPD_SUSP_CTRL);
 
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 0b0618edd645..1ab919f836a8 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -156,6 +156,14 @@ struct ehca_mod_qp_parm {
 
 #define EHCA_MOD_QP_PARM_MAX 4
 
+#define QMAP_IDX_MASK 0xFFFFULL
+
+/* struct for tracking if cqes have been reported to the application */
+struct ehca_qmap_entry {
+        u16 app_wr_id;
+        u16 reported;
+};
+
 struct ehca_qp {
         union {
                 struct ib_qp ib_qp;
@@ -165,6 +173,7 @@ struct ehca_qp {
         enum ehca_ext_qp_type ext_type;
         enum ib_qp_state state;
         struct ipz_queue ipz_squeue;
+        struct ehca_qmap_entry *sq_map;
         struct ipz_queue ipz_rqueue;
         struct h_galpas galpas;
         u32 qkey;
diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h
index 818803057ebf..5d28e3e98a20 100644
--- a/drivers/infiniband/hw/ehca/ehca_qes.h
+++ b/drivers/infiniband/hw/ehca/ehca_qes.h
@@ -213,6 +213,7 @@ struct ehca_wqe {
 #define WC_STATUS_ERROR_BIT 0x80000000
 #define WC_STATUS_REMOTE_ERROR_FLAGS 0x0000F800
 #define WC_STATUS_PURGE_BIT 0x10
+#define WC_SEND_RECEIVE_BIT 0x80
 
 struct ehca_cqe {
         u64 work_request_id;
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index ea13efddf175..b6bcee036734 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -412,6 +412,7 @@ static struct ehca_qp *internal_create_qp(
         struct ehca_shca *shca = container_of(pd->device, struct ehca_shca,
                                               ib_device);
         struct ib_ucontext *context = NULL;
+        u32 nr_qes;
         u64 h_ret;
         int is_llqp = 0, has_srq = 0;
         int qp_type, max_send_sge, max_recv_sge, ret;
@@ -715,6 +716,15 @@ static struct ehca_qp *internal_create_qp(
                                  "and pages ret=%i", ret);
                         goto create_qp_exit2;
                 }
+                nr_qes = my_qp->ipz_squeue.queue_length /
+                         my_qp->ipz_squeue.qe_size;
+                my_qp->sq_map = vmalloc(nr_qes *
+                                        sizeof(struct ehca_qmap_entry));
+                if (!my_qp->sq_map) {
+                        ehca_err(pd->device, "Couldn't allocate squeue "
+                                 "map ret=%i", ret);
+                        goto create_qp_exit3;
+                }
         }
 
         if (HAS_RQ(my_qp)) {
@@ -724,7 +734,7 @@ static struct ehca_qp *internal_create_qp(
                 if (ret) {
                         ehca_err(pd->device, "Couldn't initialize rqueue "
                                  "and pages ret=%i", ret);
-                        goto create_qp_exit3;
+                        goto create_qp_exit4;
                 }
         }
 
@@ -770,7 +780,7 @@ static struct ehca_qp *internal_create_qp(
                         if (!my_qp->mod_qp_parm) {
                                 ehca_err(pd->device,
                                          "Could not alloc mod_qp_parm");
-                                goto create_qp_exit4;
+                                goto create_qp_exit5;
                         }
                 }
         }
@@ -780,7 +790,7 @@ static struct ehca_qp *internal_create_qp(
                 h_ret = ehca_define_sqp(shca, my_qp, init_attr);
                 if (h_ret != H_SUCCESS) {
                         ret = ehca2ib_return_code(h_ret);
-                        goto create_qp_exit5;
+                        goto create_qp_exit6;
                 }
         }
 
@@ -789,7 +799,7 @@ static struct ehca_qp *internal_create_qp(
                 if (ret) {
                         ehca_err(pd->device,
                                  "Couldn't assign qp to send_cq ret=%i", ret);
-                        goto create_qp_exit5;
+                        goto create_qp_exit6;
                 }
         }
 
@@ -815,22 +825,26 @@ static struct ehca_qp *internal_create_qp(
                 if (ib_copy_to_udata(udata, &resp, sizeof resp)) {
                         ehca_err(pd->device, "Copy to udata failed");
                         ret = -EINVAL;
-                        goto create_qp_exit6;
+                        goto create_qp_exit7;
                 }
         }
 
         return my_qp;
 
-create_qp_exit6:
+create_qp_exit7:
         ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num);
 
-create_qp_exit5:
+create_qp_exit6:
         kfree(my_qp->mod_qp_parm);
 
-create_qp_exit4:
+create_qp_exit5:
         if (HAS_RQ(my_qp))
                 ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
 
+create_qp_exit4:
+        if (HAS_SQ(my_qp))
+                vfree(my_qp->sq_map);
+
 create_qp_exit3:
         if (HAS_SQ(my_qp))
                 ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
@@ -1534,8 +1548,6 @@ static int internal_modify_qp(struct ib_qp *ibqp,
         if (attr_mask & IB_QP_QKEY)
                 my_qp->qkey = attr->qkey;
 
-        my_qp->state = qp_new_state;
-
 modify_qp_exit2:
         if (squeue_locked) { /* this means: sqe -> rts */
                 spin_unlock_irqrestore(&my_qp->spinlock_s, flags);
@@ -1551,6 +1563,8 @@ modify_qp_exit1:
 int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
                    struct ib_udata *udata)
 {
+        int ret = 0;
+
         struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca,
                                               ib_device);
         struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp);
@@ -1597,12 +1611,18 @@ int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
                                  attr->qp_state, my_qp->init_attr.port_num,
                                  ibqp->qp_type);
                         spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
-                        return 0;
+                        goto out;
                 }
                 spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
         }
 
-        return internal_modify_qp(ibqp, attr, attr_mask, 0);
+        ret = internal_modify_qp(ibqp, attr, attr_mask, 0);
+
+out:
+        if ((ret == 0) && (attr_mask & IB_QP_STATE))
+                my_qp->state = attr->qp_state;
+
+        return ret;
 }
 
 void ehca_recover_sqp(struct ib_qp *sqp)
@@ -1973,8 +1993,10 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 
         if (HAS_RQ(my_qp))
                 ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
-        if (HAS_SQ(my_qp))
+        if (HAS_SQ(my_qp)) {
                 ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
+                vfree(my_qp->sq_map);
+        }
         kmem_cache_free(qp_cache, my_qp);
         atomic_dec(&shca->num_qps);
         return 0;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index 898c8b5c38dd..4426d82fe798 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -139,6 +139,7 @@ static void trace_send_wr_ud(const struct ib_send_wr *send_wr)
 static inline int ehca_write_swqe(struct ehca_qp *qp,
                                   struct ehca_wqe *wqe_p,
                                   const struct ib_send_wr *send_wr,
+                                  u32 sq_map_idx,
                                   int hidden)
 {
         u32 idx;
@@ -157,7 +158,11 @@ static inline int ehca_write_swqe(struct ehca_qp *qp,
         /* clear wqe header until sglist */
         memset(wqe_p, 0, offsetof(struct ehca_wqe, u.ud_av.sg_list));
 
-        wqe_p->work_request_id = send_wr->wr_id;
+        wqe_p->work_request_id = send_wr->wr_id & ~QMAP_IDX_MASK;
+        wqe_p->work_request_id |= sq_map_idx & QMAP_IDX_MASK;
+
+        qp->sq_map[sq_map_idx].app_wr_id = send_wr->wr_id & QMAP_IDX_MASK;
+        qp->sq_map[sq_map_idx].reported = 0;
 
         switch (send_wr->opcode) {
         case IB_WR_SEND:
@@ -381,6 +386,7 @@ static inline int post_one_send(struct ehca_qp *my_qp,
 {
         struct ehca_wqe *wqe_p;
         int ret;
+        u32 sq_map_idx;
         u64 start_offset = my_qp->ipz_squeue.current_q_offset;
 
         /* get pointer next to free WQE */
@@ -393,8 +399,15 @@ static inline int post_one_send(struct ehca_qp *my_qp,
                          "qp_num=%x", my_qp->ib_qp.qp_num);
                 return -ENOMEM;
         }
+
+        /*
+         * Get the index of the WQE in the send queue. The same index is used
+         * for writing into the sq_map.
+         */
+        sq_map_idx = start_offset / my_qp->ipz_squeue.qe_size;
+
         /* write a SEND WQE into the QUEUE */
-        ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, hidden);
+        ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, sq_map_idx, hidden);
         /*
          * if something failed,
          * reset the free entry pointer to the start value
@@ -589,7 +602,7 @@ static inline int ehca_poll_cq_one(struct ib_cq *cq, struct ib_wc *wc)
         struct ehca_qp *my_qp;
         int cqe_count = 0, is_error;
 
-poll_cq_one_read_cqe:
+repoll:
         cqe = (struct ehca_cqe *)
                 ipz_qeit_get_inc_valid(&my_cq->ipz_queue);
         if (!cqe) {
@@ -617,7 +630,7 @@ poll_cq_one_read_cqe:
                         ehca_dmp(cqe, 64, "cq_num=%x qp_num=%x",
                                  my_cq->cq_number, cqe->local_qp_number);
                         /* ignore this purged cqe */
-                        goto poll_cq_one_read_cqe;
+                        goto repoll;
                 }
                 spin_lock_irqsave(&qp->spinlock_s, flags);
                 purgeflag = qp->sqerr_purgeflag;
@@ -636,7 +649,7 @@ poll_cq_one_read_cqe:
                          * that caused sqe and turn off purge flag
                          */
                         qp->sqerr_purgeflag = 0;
-                        goto poll_cq_one_read_cqe;
+                        goto repoll;
                 }
         }
 
@@ -654,8 +667,34 @@ poll_cq_one_read_cqe:
                          my_cq, my_cq->cq_number);
         }
 
-        /* we got a completion! */
-        wc->wr_id = cqe->work_request_id;
+        read_lock(&ehca_qp_idr_lock);
+        my_qp = idr_find(&ehca_qp_idr, cqe->qp_token);
+        read_unlock(&ehca_qp_idr_lock);
+        if (!my_qp)
+                goto repoll;
+        wc->qp = &my_qp->ib_qp;
+
+        if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) {
+                struct ehca_qmap_entry *qmap_entry;
+                /*
+                 * We got a send completion and need to restore the original
+                 * wr_id.
+                 */
+                qmap_entry = &my_qp->sq_map[cqe->work_request_id &
+                                            QMAP_IDX_MASK];
+
+                if (qmap_entry->reported) {
+                        ehca_warn(cq->device, "Double cqe on qp_num=%#x",
+                                  my_qp->real_qp_num);
+                        /* found a double cqe, discard it and read next one */
+                        goto repoll;
+                }
+                wc->wr_id = cqe->work_request_id & ~QMAP_IDX_MASK;
+                wc->wr_id |= qmap_entry->app_wr_id;
+                qmap_entry->reported = 1;
+        } else
+                /* We got a receive completion. */
+                wc->wr_id = cqe->work_request_id;
 
         /* eval ib_wc_opcode */
         wc->opcode = ib_wc_opcode[cqe->optype]-1;
@@ -667,7 +706,7 @@ poll_cq_one_read_cqe:
                 ehca_dmp(cqe, 64, "ehca_cq=%p cq_num=%x",
                          my_cq, my_cq->cq_number);
                 /* update also queue adder to throw away this entry!!! */
-                goto poll_cq_one_exit0;
+                goto repoll;
         }
 
         /* eval ib_wc_status */
@@ -678,11 +717,6 @@ poll_cq_one_read_cqe:
         } else
                 wc->status = IB_WC_SUCCESS;
 
-        read_lock(&ehca_qp_idr_lock);
-        my_qp = idr_find(&ehca_qp_idr, cqe->qp_token);
-        wc->qp = &my_qp->ib_qp;
-        read_unlock(&ehca_qp_idr_lock);
-
         wc->byte_len = cqe->nr_bytes_transferred;
         wc->pkey_index = cqe->pkey_index;
         wc->slid = cqe->rlid;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 7ebc400a4b3d..341ffedafed6 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -202,7 +202,7 @@ static void ipoib_cm_free_rx_ring(struct net_device *dev,
                         dev_kfree_skb_any(rx_ring[i].skb);
                 }
 
-        kfree(rx_ring);
+        vfree(rx_ring);
 }
 
 static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv *priv)
@@ -352,9 +352,14 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i
         int ret;
         int i;
 
-        rx->rx_ring = kcalloc(ipoib_recvq_size, sizeof *rx->rx_ring, GFP_KERNEL);
-        if (!rx->rx_ring)
+        rx->rx_ring = vmalloc(ipoib_recvq_size * sizeof *rx->rx_ring);
+        if (!rx->rx_ring) {
+                printk(KERN_WARNING "%s: failed to allocate CM non-SRQ ring (%d entries)\n",
+                       priv->ca->name, ipoib_recvq_size);
                 return -ENOMEM;
+        }
+
+        memset(rx->rx_ring, 0, ipoib_recvq_size * sizeof *rx->rx_ring);
 
         t = kmalloc(sizeof *t, GFP_KERNEL);
         if (!t) {
@@ -1494,14 +1499,16 @@ static void ipoib_cm_create_srq(struct net_device *dev, int max_sge)
                 return;
         }
 
-        priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring,
-                                    GFP_KERNEL);
+        priv->cm.srq_ring = vmalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring);
         if (!priv->cm.srq_ring) {
                 printk(KERN_WARNING "%s: failed to allocate CM SRQ ring (%d entries)\n",
                        priv->ca->name, ipoib_recvq_size);
                 ib_destroy_srq(priv->cm.srq);
                 priv->cm.srq = NULL;
+                return;
         }
+
+        memset(priv->cm.srq_ring, 0, ipoib_recvq_size * sizeof *priv->cm.srq_ring);
 }
 
 int ipoib_cm_dev_init(struct net_device *dev)
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 2d65411f6763..a92d81567559 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -647,6 +647,47 @@ static int str_to_user(const char *str, unsigned int maxlen, void __user *p)
         return copy_to_user(p, str, len) ? -EFAULT : len;
 }
 
+#define OLD_KEY_MAX     0x1ff
+static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode)
+{
+        static unsigned long keymax_warn_time;
+        unsigned long *bits;
+        int len;
+
+        switch (_IOC_NR(cmd) & EV_MAX) {
+
+        case      0: bits = dev->evbit;  len = EV_MAX;  break;
+        case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
+        case EV_REL: bits = dev->relbit; len = REL_MAX; break;
+        case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
+        case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
+        case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
+        case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
+        case EV_FF:  bits = dev->ffbit;  len = FF_MAX;  break;
+        case EV_SW:  bits = dev->swbit;  len = SW_MAX;  break;
+        default: return -EINVAL;
+        }
+
+        /*
+         * Work around bugs in userspace programs that like to do
+         * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
+         * should be in bytes, not in bits.
+         */
+        if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) {
+                len = OLD_KEY_MAX;
+                if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
+                        printk(KERN_WARNING
+                                "evdev.c(EVIOCGBIT): Suspicious buffer size %d, "
+                                "limiting output to %d bytes. See "
+                                "http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
+                                OLD_KEY_MAX,
+                                BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
+        }
+
+        return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
+}
+#undef OLD_KEY_MAX
+
 static long evdev_do_ioctl(struct file *file, unsigned int cmd,
                            void __user *p, int compat_mode)
 {
@@ -733,26 +774,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 
                 if (_IOC_DIR(cmd) == _IOC_READ) {
 
-                        if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) {
-
-                                unsigned long *bits;
-                                int len;
-
-                                switch (_IOC_NR(cmd) & EV_MAX) {
-
-                                case      0: bits = dev->evbit;  len = EV_MAX;  break;
-                                case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
-                                case EV_REL: bits = dev->relbit; len = REL_MAX; break;
-                                case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
-                                case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
-                                case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
-                                case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
-                                case EV_FF:  bits = dev->ffbit;  len = FF_MAX;  break;
-                                case EV_SW:  bits = dev->swbit;  len = SW_MAX;  break;
-                                default: return -EINVAL;
-                                }
-                                return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
-                        }
+                        if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
+                                return handle_eviocgbit(dev, cmd, p, compat_mode);
 
                         if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
                                 return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd),
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 87d3e7eabffd..6791be81eb29 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -127,6 +127,7 @@ static const struct xpad_device {
         { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
         { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
         { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+        { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
         { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
         { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
         { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index be58730e636a..3f48279f2195 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -118,6 +118,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
                 unsigned int type = button->type ?: EV_KEY;
 
                 bdata->input = input;
+                bdata->button = button;
                 setup_timer(&bdata->timer,
                             gpio_check_button, (unsigned long)bdata);
 
@@ -256,7 +257,7 @@ static int gpio_keys_resume(struct platform_device *pdev)
 #define gpio_keys_resume        NULL
 #endif
 
-struct platform_driver gpio_keys_device_driver = {
+static struct platform_driver gpio_keys_device_driver = {
         .probe          = gpio_keys_probe,
         .remove         = __devexit_p(gpio_keys_remove),
         .suspend        = gpio_keys_suspend,
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 7bbea097cda2..f996546fc443 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -130,6 +130,29 @@ config MOUSE_APPLETOUCH
           To compile this driver as a module, choose M here: the
           module will be called appletouch.
 
+config MOUSE_BCM5974
+        tristate "Apple USB BCM5974 Multitouch trackpad support"
+        depends on USB_ARCH_HAS_HCD
+        select USB
+        help
+          Say Y here if you have an Apple USB BCM5974 Multitouch
+          trackpad.
+
+          The BCM5974 is the multitouch trackpad found in the Macbook
+          Air (JAN2008) and Macbook Pro Penryn (FEB2008) laptops.
+
+          It is also found in the IPhone (2007) and Ipod Touch (2008).
+
+          This driver provides multitouch functionality together with
+          the synaptics X11 driver.
+
+          The interface is currently identical to the appletouch interface,
+          for further information, see
+          <file:Documentation/input/appletouch.txt>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called bcm5974.
+
 config MOUSE_INPORT
         tristate "InPort/MS/ATIXL busmouse"
         depends on ISA
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 9e6e36330820..d4d202516090 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -6,6 +6,7 @@
 
 obj-$(CONFIG_MOUSE_AMIGA)       += amimouse.o
 obj-$(CONFIG_MOUSE_APPLETOUCH)  += appletouch.o
+obj-$(CONFIG_MOUSE_BCM5974)     += bcm5974.o
 obj-$(CONFIG_MOUSE_ATARI)       += atarimouse.o
 obj-$(CONFIG_MOUSE_RISCPC)      += rpcmouse.o
 obj-$(CONFIG_MOUSE_INPORT)      += inport.o
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
new file mode 100644
index 000000000000..2ec921bf3c60
--- /dev/null
+++ b/drivers/input/mouse/bcm5974.c
@@ -0,0 +1,681 @@
+/*
+ * Apple USB BCM5974 (Macbook Air and Penryn Macbook Pro) multitouch driver
+ *
+ * Copyright (C) 2008      Henrik Rydberg (rydberg@euromail.se)
+ *
+ * The USB initialization and package decoding was made by
+ * Scott Shawcroft as part of the touchd user-space driver project:
+ * Copyright (C) 2008      Scott Shawcroft (scott.shawcroft@gmail.com)
+ *
+ * The BCM5974 driver is based on the appletouch driver:
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2005      Johannes Berg (johannes@sipsolutions.net)
+ * Copyright (C) 2005      Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2005      Frank Arnold (frank@scirocco-5v-turbo.de)
+ * Copyright (C) 2005      Peter Osterlund (petero2@telia.com)
+ * Copyright (C) 2005      Michael Hanselmann (linux-kernel@hansmi.ch)
+ * Copyright (C) 2006      Nicolas Boichat (nicolas@boichat.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+
+#define USB_VENDOR_ID_APPLE             0x05ac
+
+/* MacbookAir, aka wellspring */
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI     0x0223
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO      0x0224
+#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS      0x0225
+/* MacbookProPenryn, aka wellspring2 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI    0x0230
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO     0x0231
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS     0x0232
+
+#define BCM5974_DEVICE(prod) {                                  \
+        .match_flags = (USB_DEVICE_ID_MATCH_DEVICE |            \
+                        USB_DEVICE_ID_MATCH_INT_CLASS |         \
+                        USB_DEVICE_ID_MATCH_INT_PROTOCOL),      \
+        .idVendor = USB_VENDOR_ID_APPLE,                        \
+        .idProduct = (prod),                                    \
+        .bInterfaceClass = USB_INTERFACE_CLASS_HID,             \
+        .bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE      \
+}
+
+/* table of devices that work with this driver */
+static const struct usb_device_id bcm5974_table [] = {
+        /* MacbookAir1.1 */
+        BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
+        BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
+        BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_JIS),
+        /* MacbookProPenryn */
+        BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
+        BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
+        BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+        /* Terminating entry */
+        {}
+};
+MODULE_DEVICE_TABLE(usb, bcm5974_table);
+
+MODULE_AUTHOR("Henrik Rydberg");
+MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver");
+MODULE_LICENSE("GPL");
+
+#define dprintk(level, format, a...)\
+        { if (debug >= level) printk(KERN_DEBUG format, ##a); }
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activate debugging output");
+
+/* button data structure */
+struct bt_data {
+        u8 unknown1;            /* constant */
+        u8 button;              /* left button */
+        u8 rel_x;               /* relative x coordinate */
+        u8 rel_y;               /* relative y coordinate */
+};
+
+/* trackpad header structure */
+struct tp_header {
+        u8 unknown1[16];        /* constants, timers, etc */
+        u8 fingers;             /* number of fingers on trackpad */
+        u8 unknown2[9];         /* constants, timers, etc */
+};
+
+/* trackpad finger structure */
+struct tp_finger {
+        __le16 origin;          /* left/right origin? */
+        __le16 abs_x;           /* absolute x coodinate */
+        __le16 abs_y;           /* absolute y coodinate */
+        __le16 rel_x;           /* relative x coodinate */
+        __le16 rel_y;           /* relative y coodinate */
+        __le16 size_major;      /* finger size, major axis? */
+        __le16 size_minor;      /* finger size, minor axis? */
+        __le16 orientation;     /* 16384 when point, else 15 bit angle */
+        __le16 force_major;     /* trackpad force, major axis? */
+        __le16 force_minor;     /* trackpad force, minor axis? */
+        __le16 unused[3];       /* zeros */
+        __le16 multi;           /* one finger: varies, more fingers: constant */
+};
+
+/* trackpad data structure, empirically at least ten fingers */
+struct tp_data {
+        struct tp_header header;
+        struct tp_finger finger[16];
+};
+
+/* device-specific parameters */
+struct bcm5974_param {
+        int dim;                /* logical dimension */
+        int fuzz;               /* logical noise value */
+        int devmin;             /* device minimum reading */
+        int devmax;             /* device maximum reading */
+};
+
+/* device-specific configuration */
+struct bcm5974_config {
+        int ansi, iso, jis;     /* the product id of this device */
+        int bt_ep;              /* the endpoint of the button interface */
+        int bt_datalen;         /* data length of the button interface */
+        int tp_ep;              /* the endpoint of the trackpad interface */
+        int tp_datalen;         /* data length of the trackpad interface */
+        struct bcm5974_param p; /* finger pressure limits */
+        struct bcm5974_param w; /* finger width limits */
+        struct bcm5974_param x; /* horizontal limits */
+        struct bcm5974_param y; /* vertical limits */
+};
+
+/* logical device structure */
+struct bcm5974 {
+        char phys[64];
+        struct usb_device *udev;        /* usb device */
+        struct usb_interface *intf;     /* our interface */
+        struct input_dev *input;        /* input dev */
+        struct bcm5974_config cfg;      /* device configuration */
+        struct mutex pm_mutex;          /* serialize access to open/suspend */
+        int opened;                     /* 1: opened, 0: closed */
+        struct urb *bt_urb;             /* button usb request block */
+        struct bt_data *bt_data;        /* button transferred data */
+        struct urb *tp_urb;             /* trackpad usb request block */
+        struct tp_data *tp_data;        /* trackpad transferred data */
+};
+
+/* logical dimensions */
+#define DIM_PRESSURE    256             /* maximum finger pressure */
+#define DIM_WIDTH       16              /* maximum finger width */
+#define DIM_X           1280            /* maximum trackpad x value */
+#define DIM_Y           800             /* maximum trackpad y value */
+
+/* logical signal quality */
+#define SN_PRESSURE     45              /* pressure signal-to-noise ratio */
+#define SN_WIDTH        100             /* width signal-to-noise ratio */
+#define SN_COORD        250             /* coordinate signal-to-noise ratio */
+
+/* device constants */
+static const struct bcm5974_config bcm5974_config_table[] = {
+        {
+                USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
+                USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
+                USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+                0x84, sizeof(struct bt_data),
+                0x81, sizeof(struct tp_data),
+                { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+                { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+                { DIM_X, DIM_X / SN_COORD, -4824, 5342 },
+                { DIM_Y, DIM_Y / SN_COORD, -172, 5820 }
+        },
+        {
+                USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
+                USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
+                USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+                0x84, sizeof(struct bt_data),
+                0x81, sizeof(struct tp_data),
+                { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+                { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+                { DIM_X, DIM_X / SN_COORD, -4824, 4824 },
+                { DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
+        },
+        {}
+};
+
+/* return the device-specific configuration by device */
+static const struct bcm5974_config *bcm5974_get_config(struct usb_device *udev)
+{
+        u16 id = le16_to_cpu(udev->descriptor.idProduct);
+        const struct bcm5974_config *cfg;
+
+        for (cfg = bcm5974_config_table; cfg->ansi; ++cfg)
+                if (cfg->ansi == id || cfg->iso == id || cfg->jis == id)
+                        return cfg;
+
+        return bcm5974_config_table;
+}
+
+/* convert 16-bit little endian to signed integer */
+static inline int raw2int(__le16 x)
+{
+        return (signed short)le16_to_cpu(x);
+}
+
+/* scale device data to logical dimensions (asserts devmin < devmax) */
+static inline int int2scale(const struct bcm5974_param *p, int x)
+{
+        return x * p->dim / (p->devmax - p->devmin);
+}
+
+/* all logical value ranges are [0,dim). */
+static inline int int2bound(const struct bcm5974_param *p, int x)
+{
+        int s = int2scale(p, x);
+
+        return clamp_val(s, 0, p->dim - 1);
+}
+
+/* setup which logical events to report */
+static void setup_events_to_report(struct input_dev *input_dev,
+                                   const struct bcm5974_config *cfg)
+{
+        __set_bit(EV_ABS, input_dev->evbit);
+
+        input_set_abs_params(input_dev, ABS_PRESSURE,
+                                0, cfg->p.dim, cfg->p.fuzz, 0);
+        input_set_abs_params(input_dev, ABS_TOOL_WIDTH,
+                                0, cfg->w.dim, cfg->w.fuzz, 0);
+        input_set_abs_params(input_dev, ABS_X,
+                                0, cfg->x.dim, cfg->x.fuzz, 0);
+        input_set_abs_params(input_dev, ABS_Y,
+                                0, cfg->y.dim, cfg->y.fuzz, 0);
+
+        __set_bit(EV_KEY, input_dev->evbit);
+        __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+        __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+        __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+        __set_bit(BTN_LEFT, input_dev->keybit);
+}
+
+/* report button data as logical button state */
+static int report_bt_state(struct bcm5974 *dev, int size)
+{
+        if (size != sizeof(struct bt_data))
+                return -EIO;
+
+        input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
+        input_sync(dev->input);
+
+        return 0;
+}
+
+/* report trackpad data as logical trackpad state */
+static int report_tp_state(struct bcm5974 *dev, int size)
+{
+        const struct bcm5974_config *c = &dev->cfg;
+        const struct tp_finger *f = dev->tp_data->finger;
+        struct input_dev *input = dev->input;
+        const int fingers = (size - 26) / 28;
+        int p = 0, w, x, y, n = 0;
+
+        if (size < 26 || (size - 26) % 28 != 0)
+                return -EIO;
+
+        if (fingers) {
+                p = raw2int(f->force_major);
+                w = raw2int(f->size_major);
+                x = raw2int(f->abs_x);
+                y = raw2int(f->abs_y);
+                n = p > 0 ? fingers : 0;
+
+                dprintk(9,
+                        "bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+                        p, w, x, y, n);
+
+                input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
+                input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
+                input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+        }
+
+        input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+
+        input_report_key(input, BTN_TOOL_FINGER, n == 1);
+        input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
+        input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+
+        input_sync(input);
+
+        return 0;
+}
+
+/* Wellspring initialization constants */
+#define BCM5974_WELLSPRING_MODE_READ_REQUEST_ID         1
+#define BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID        9
+#define BCM5974_WELLSPRING_MODE_REQUEST_VALUE           0x300
+#define BCM5974_WELLSPRING_MODE_REQUEST_INDEX           0
+#define BCM5974_WELLSPRING_MODE_VENDOR_VALUE            0x01
+
+static int bcm5974_wellspring_mode(struct bcm5974 *dev)
+{
+        char *data = kmalloc(8, GFP_KERNEL);
+        int retval = 0, size;
+
+        if (!data) {
+                err("bcm5974: out of memory");
+                retval = -ENOMEM;
+                goto out;
+        }
+
+        /* read configuration */
+        size = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+                        BCM5974_WELLSPRING_MODE_READ_REQUEST_ID,
+                        USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+                        BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+                        BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+        if (size != 8) {
+                err("bcm5974: could not read from device");
+                retval = -EIO;
+                goto out;
+        }
+
+        /* apply the mode switch */
+        data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE;
+
+        /* write configuration */
+        size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+                        BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID,
+                        USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+                        BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+                        BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+        if (size != 8) {
+                err("bcm5974: could not write to device");
+                retval = -EIO;
+                goto out;
+        }
+
+        dprintk(2, "bcm5974: switched to wellspring mode.\n");
+
+ out:
+        kfree(data);
+        return retval;
+}
+
+static void bcm5974_irq_button(struct urb *urb)
+{
+        struct bcm5974 *dev = urb->context;
+        int error;
+
+        switch (urb->status) {
+        case 0:
+                break;
+        case -EOVERFLOW:
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                dbg("bcm5974: button urb shutting down: %d", urb->status);
+                return;
+        default:
+                dbg("bcm5974: button urb status: %d", urb->status);
+                goto exit;
+        }
+
+        if (report_bt_state(dev, dev->bt_urb->actual_length))
+                dprintk(1, "bcm5974: bad button package, length: %d\n",
+                        dev->bt_urb->actual_length);
+
+exit:
+        error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
+        if (error)
+                err("bcm5974: button urb failed: %d", error);
+}
+
+static void bcm5974_irq_trackpad(struct urb *urb)
+{
+        struct bcm5974 *dev = urb->context;
+        int error;
+
+        switch (urb->status) {
+        case 0:
+                break;
+        case -EOVERFLOW:
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+                return;
+        default:
+                dbg("bcm5974: trackpad urb status: %d", urb->status);
+                goto exit;
+        }
+
+        /* control response ignored */
+        if (dev->tp_urb->actual_length == 2)
+                goto exit;
+
+        if (report_tp_state(dev, dev->tp_urb->actual_length))
+                dprintk(1, "bcm5974: bad trackpad package, length: %d\n",
+                        dev->tp_urb->actual_length);
+
+exit:
+        error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
+        if (error)
+                err("bcm5974: trackpad urb failed: %d", error);
+}
+
+/*
+ * The Wellspring trackpad, like many recent Apple trackpads, share
+ * the usb device with the keyboard. Since keyboards are usually
+ * handled by the HID system, the device ends up being handled by two
+ * modules. Setting up the device therefore becomes slightly
+ * complicated. To enable multitouch features, a mode switch is
+ * required, which is usually applied via the control interface of the
+ * device.  It can be argued where this switch should take place. In
+ * some drivers, like appletouch, the switch is made during
+ * probe. However, the hid module may also alter the state of the
+ * device, resulting in trackpad malfunction under certain
+ * circumstances. To get around this problem, there is at least one
+ * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
+ * recieve a reset_resume request rather than the normal resume.
+ * Since the implementation of reset_resume is equal to mode switch
+ * plus start_traffic, it seems easier to always do the switch when
+ * starting traffic on the device.
+ */
+static int bcm5974_start_traffic(struct bcm5974 *dev)
+{
+        if (bcm5974_wellspring_mode(dev)) {
+                dprintk(1, "bcm5974: mode switch failed\n");
+                goto error;
+        }
+
+        if (usb_submit_urb(dev->bt_urb, GFP_KERNEL))
+                goto error;
+
+        if (usb_submit_urb(dev->tp_urb, GFP_KERNEL))
+                goto err_kill_bt;
+
+        return 0;
+
+err_kill_bt:
+        usb_kill_urb(dev->bt_urb);
+error:
+        return -EIO;
+}
+
+static void bcm5974_pause_traffic(struct bcm5974 *dev)
+{
+        usb_kill_urb(dev->tp_urb);
+        usb_kill_urb(dev->bt_urb);
+}
+
+/*
+ * The code below implements open/close and manual suspend/resume.
+ * All functions may be called in random order.
+ *
+ * Opening a suspended device fails with EACCES - permission denied.
+ *
+ * Failing a resume leaves the device resumed but closed.
+ */
+static int bcm5974_open(struct input_dev *input)
+{
+        struct bcm5974 *dev = input_get_drvdata(input);
+        int error;
+
+        error = usb_autopm_get_interface(dev->intf);
+        if (error)
+                return error;
+
+        mutex_lock(&dev->pm_mutex);
+
+        error = bcm5974_start_traffic(dev);
+        if (!error)
+                dev->opened = 1;
+
+        mutex_unlock(&dev->pm_mutex);
+
+        if (error)
+                usb_autopm_put_interface(dev->intf);
+
+        return error;
+}
+
+static void bcm5974_close(struct input_dev *input)
+{
+        struct bcm5974 *dev = input_get_drvdata(input);
+
+        mutex_lock(&dev->pm_mutex);
+
+        bcm5974_pause_traffic(dev);
+        dev->opened = 0;
+
+        mutex_unlock(&dev->pm_mutex);
+
+        usb_autopm_put_interface(dev->intf);
+}
+
+static int bcm5974_suspend(struct usb_interface *iface, pm_message_t message)
+{
+        struct bcm5974 *dev = usb_get_intfdata(iface);
+
+        mutex_lock(&dev->pm_mutex);
+
+        if (dev->opened)
+                bcm5974_pause_traffic(dev);
+
+        mutex_unlock(&dev->pm_mutex);
+
+        return 0;
+}
+
+static int bcm5974_resume(struct usb_interface *iface)
+{
+        struct bcm5974 *dev = usb_get_intfdata(iface);
+        int error = 0;
+
+        mutex_lock(&dev->pm_mutex);
+
+        if (dev->opened)
+                error = bcm5974_start_traffic(dev);
+
+        mutex_unlock(&dev->pm_mutex);
+
+        return error;
+}
+
+static int bcm5974_probe(struct usb_interface *iface,
+                         const struct usb_device_id *id)
+{
+        struct usb_device *udev = interface_to_usbdev(iface);
+        const struct bcm5974_config *cfg;
+        struct bcm5974 *dev;
+        struct input_dev *input_dev;
+        int error = -ENOMEM;
+
+        /* find the product index */
+        cfg = bcm5974_get_config(udev);
+
+        /* allocate memory for our device state and initialize it */
+        dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
+        input_dev = input_allocate_device();
+        if (!dev || !input_dev) {
+                err("bcm5974: out of memory");
+                goto err_free_devs;
+        }
+
+        dev->udev = udev;
+        dev->intf = iface;
+        dev->input = input_dev;
+        dev->cfg = *cfg;
+        mutex_init(&dev->pm_mutex);
+
+        /* setup urbs */
+        dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL);
+        if (!dev->bt_urb)
+                goto err_free_devs;
+
+        dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL);
+        if (!dev->tp_urb)
+                goto err_free_bt_urb;
+
+        dev->bt_data = usb_buffer_alloc(dev->udev,
+                                        dev->cfg.bt_datalen, GFP_KERNEL,
+                                        &dev->bt_urb->transfer_dma);
+        if (!dev->bt_data)
+                goto err_free_urb;
+
+        dev->tp_data = usb_buffer_alloc(dev->udev,
+                                        dev->cfg.tp_datalen, GFP_KERNEL,
+                                        &dev->tp_urb->transfer_dma);
+        if (!dev->tp_data)
+                goto err_free_bt_buffer;
+
+        usb_fill_int_urb(dev->bt_urb, udev,
+                         usb_rcvintpipe(udev, cfg->bt_ep),
+                         dev->bt_data, dev->cfg.bt_datalen,
+                         bcm5974_irq_button, dev, 1);
+
+        usb_fill_int_urb(dev->tp_urb, udev,
+                         usb_rcvintpipe(udev, cfg->tp_ep),
+                         dev->tp_data, dev->cfg.tp_datalen,
+                         bcm5974_irq_trackpad, dev, 1);
+
+        /* create bcm5974 device */
+        usb_make_path(udev, dev->phys, sizeof(dev->phys));
+        strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+        input_dev->name = "bcm5974";
+        input_dev->phys = dev->phys;
+        usb_to_input_id(dev->udev, &input_dev->id);
+        input_dev->dev.parent = &iface->dev;
+
+        input_set_drvdata(input_dev, dev);
+
+        input_dev->open = bcm5974_open;
+        input_dev->close = bcm5974_close;
+
+        setup_events_to_report(input_dev, cfg);
+
+        error = input_register_device(dev->input);
+        if (error)
+                goto err_free_buffer;
+
+        /* save our data pointer in this interface device */
+        usb_set_intfdata(iface, dev);
+
+        return 0;
+
+err_free_buffer:
+        usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+                dev->tp_data, dev->tp_urb->transfer_dma);
+err_free_bt_buffer:
+        usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+                dev->bt_data, dev->bt_urb->transfer_dma);
+err_free_urb:
+        usb_free_urb(dev->tp_urb);
+err_free_bt_urb:
+        usb_free_urb(dev->bt_urb);
+err_free_devs:
+        usb_set_intfdata(iface, NULL);
+        input_free_device(input_dev);
+        kfree(dev);
+        return error;
+}
+
+static void bcm5974_disconnect(struct usb_interface *iface)
+{
+        struct bcm5974 *dev = usb_get_intfdata(iface);
+
+        usb_set_intfdata(iface, NULL);
+
+        input_unregister_device(dev->input);
+        usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+                        dev->tp_data, dev->tp_urb->transfer_dma);
+        usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+                        dev->bt_data, dev->bt_urb->transfer_dma);
+        usb_free_urb(dev->tp_urb);
+        usb_free_urb(dev->bt_urb);
+        kfree(dev);
+}
+
+static struct usb_driver bcm5974_driver = {
+        .name                   = "bcm5974",
+        .probe                  = bcm5974_probe,
+        .disconnect             = bcm5974_disconnect,
+        .suspend                = bcm5974_suspend,
+        .resume                 = bcm5974_resume,
+        .reset_resume           = bcm5974_resume,
+        .id_table               = bcm5974_table,
+        .supports_autosuspend   = 1,
+};
+
+static int __init bcm5974_init(void)
+{
+        return usb_register(&bcm5974_driver);
+}
+
+static void __exit bcm5974_exit(void)
+{
+        usb_deregister(&bcm5974_driver);
+}
+
+module_init(bcm5974_init);
+module_exit(bcm5974_exit);
+
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
index 66bafe308b0c..692a79ec2a22 100644
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -1,10 +1,11 @@
 #ifndef _I8042_SPARCIO_H
 #define _I8042_SPARCIO_H
 
+#include <linux/of_device.h>
+
 #include <asm/io.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 static int i8042_kbd_irq = -1;
 static int i8042_aux_irq = -1;
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index fe732a574ec2..3282b741e246 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -394,6 +394,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
                         DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
                 },
         },
+        {
+                .ident = "Acer TravelMate 4280",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"),
+                },
+        },
         { }
 };
 
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index 0ed044d5e685..765007899d9a 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -269,8 +269,8 @@ static int xps2_setup(struct device *dev, struct resource *regs_res,
          * we have the PS2 in a good state */
         out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
 
-        dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n",
-                drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq);
+        dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%p, irq=%d\n",
+                drvdata->phys_addr, drvdata->base_address, drvdata->irq);
 
         serio = &drvdata->serio;
         serio->id.type = SERIO_8042;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6e60a97a234c..25287e80e236 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -249,29 +249,26 @@ config TOUCHSCREEN_WM97XX
 config TOUCHSCREEN_WM9705
         bool "WM9705 Touchscreen interface support"
         depends on TOUCHSCREEN_WM97XX
+        default y
         help
-          Say Y here if you have a Wolfson Microelectronics WM9705
-          touchscreen controller connected to your system.
-
-          If unsure, say N.
+          Say Y here to enable support for the Wolfson Microelectronics
+          WM9705 touchscreen controller.
 
 config TOUCHSCREEN_WM9712
         bool "WM9712 Touchscreen interface support"
         depends on TOUCHSCREEN_WM97XX
+        default y
         help
-          Say Y here if you have a Wolfson Microelectronics WM9712
-          touchscreen controller connected to your system.
-
-          If unsure, say N.
+          Say Y here to enable support for the Wolfson Microelectronics
+          WM9712 touchscreen controller.
 
 config TOUCHSCREEN_WM9713
         bool "WM9713 Touchscreen interface support"
         depends on TOUCHSCREEN_WM97XX
+        default y
         help
-          Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen
-          controller connected to your system.
-
-          If unsure, say N.
+          Say Y here to enable support for the Wolfson Microelectronics
+          WM9713 touchscreen controller.
 
 config TOUCHSCREEN_WM97XX_MAINSTONE
         tristate "WM97xx Mainstone accelerated touch"
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index d93500f24fbb..81d0c6053447 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -108,9 +108,8 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
 }
 /*:*/
 
-/*M:014 get_pfn is slow; it takes the mmap sem and calls get_user_pages.  We
- * could probably try to grab batches of pages here as an optimization
- * (ie. pre-faulting). :*/
+/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting). :*/
 
 /*H:350 This routine takes a page number given by the Guest and converts it to
  * an actual, physical page number.  It can fail for several reasons: the
@@ -123,19 +122,13 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
 static unsigned long get_pfn(unsigned long virtpfn, int write)
 {
         struct page *page;
-        /* This value indicates failure. */
-        unsigned long ret = -1UL;
 
-        /* get_user_pages() is a complex interface: it gets the "struct
-         * vm_area_struct" and "struct page" assocated with a range of pages.
-         * It also needs the task's mmap_sem held, and is not very quick.
-         * It returns the number of pages it got. */
-        down_read(&current->mm->mmap_sem);
-        if (get_user_pages(current, current->mm, virtpfn << PAGE_SHIFT,
-                           1, write, 1, &page, NULL) == 1)
-                ret = page_to_pfn(page);
-        up_read(&current->mm->mmap_sem);
-        return ret;
+        /* gup me one page at this address please! */
+        if (get_user_pages_fast(virtpfn << PAGE_SHIFT, 1, write, &page) == 1)
+                return page_to_pfn(page);
+
+        /* This value indicates failure. */
+        return -1UL;
 }
 
 /*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
@@ -174,7 +167,7 @@ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 /*H:460 And to complete the chain, release_pte() looks like this: */
 static void release_pte(pte_t pte)
 {
-        /* Remember that get_user_pages() took a reference to the page, in
+        /* Remember that get_user_pages_fast() took a reference to the page, in
          * get_pfn()?  We have to put it back now. */
         if (pte_flags(pte) & _PAGE_PRESENT)
                 put_page(pfn_to_page(pte_pfn(pte)));
diff --git a/drivers/md/md.c b/drivers/md/md.c
index c7aae66c6f9b..8cfadc5bd2ba 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2393,6 +2393,8 @@ static void analyze_sbs(mddev_t * mddev)
 
 }
 
+static void md_safemode_timeout(unsigned long data);
+
 static ssize_t
 safe_delay_show(mddev_t *mddev, char *page)
 {
@@ -2432,9 +2434,12 @@ safe_delay_store(mddev_t *mddev, const char *cbuf, size_t len)
         if (msec == 0)
                 mddev->safemode_delay = 0;
         else {
+                unsigned long old_delay = mddev->safemode_delay;
                 mddev->safemode_delay = (msec*HZ)/1000;
                 if (mddev->safemode_delay == 0)
                         mddev->safemode_delay = 1;
+                if (mddev->safemode_delay < old_delay)
+                        md_safemode_timeout((unsigned long)mddev);
         }
         return len;
 }
@@ -4634,6 +4639,11 @@ static int update_size(mddev_t *mddev, sector_t num_sectors)
          */
         if (mddev->sync_thread)
                 return -EBUSY;
+        if (mddev->bitmap)
+                /* Sorry, cannot grow a bitmap yet, just remove it,
+                 * grow, and re-add.
+                 */
+                return -EBUSY;
         rdev_for_each(rdev, tmp, mddev) {
                 sector_t avail;
                 avail = rdev->size * 2;
@@ -5993,7 +6003,7 @@ static int remove_and_add_spares(mddev_t *mddev)
                         }
                 }
 
-        if (mddev->degraded) {
+        if (mddev->degraded && ! mddev->ro) {
                 rdev_for_each(rdev, rtmp, mddev) {
                         if (rdev->raid_disk >= 0 &&
                             !test_bit(In_sync, &rdev->flags) &&
@@ -6067,6 +6077,8 @@ void md_check_recovery(mddev_t *mddev)
                 flush_signals(current);
         }
 
+        if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
+                return;
         if ( ! (
                 (mddev->flags && !mddev->external) ||
                 test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
@@ -6080,6 +6092,15 @@ void md_check_recovery(mddev_t *mddev)
         if (mddev_trylock(mddev)) {
                 int spares = 0;
 
+                if (mddev->ro) {
+                        /* Only thing we do on a ro array is remove
+                         * failed devices.
+                         */
+                        remove_and_add_spares(mddev);
+                        clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+                        goto unlock;
+                }
+
                 if (!mddev->external) {
                         int did_change = 0;
                         spin_lock_irq(&mddev->write_lock);
@@ -6117,7 +6138,8 @@ void md_check_recovery(mddev_t *mddev)
                         /* resync has finished, collect result */
                         md_unregister_thread(mddev->sync_thread);
                         mddev->sync_thread = NULL;
-                        if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+                        if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
+                            !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
                                 /* success...*/
                                 /* activate any spares */
                                 if (mddev->pers->spare_active(mddev))
@@ -6169,6 +6191,7 @@ void md_check_recovery(mddev_t *mddev)
                 } else if ((spares = remove_and_add_spares(mddev))) {
                         clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
                         clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+                        clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
                         set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
                 } else if (mddev->recovery_cp < MaxSector) {
                         set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -6232,7 +6255,11 @@ static int md_notify_reboot(struct notifier_block *this,
 
                 for_each_mddev(mddev, tmp)
                         if (mddev_trylock(mddev)) {
-                                do_md_stop (mddev, 1, 0);
+                                /* Force a switch to readonly even array
+                                 * appears to still be in use.  Hence
+                                 * the '100'.
+                                 */
+                                do_md_stop (mddev, 1, 100);
                                 mddev_unlock(mddev);
                         }
                 /*
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index d41bebb6da0f..e34cd0e62473 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -76,11 +76,13 @@ static void r10bio_pool_free(void *r10_bio, void *data)
         kfree(r10_bio);
 }
 
+/* Maximum size of each resync request */
 #define RESYNC_BLOCK_SIZE (64*1024)
-//#define RESYNC_BLOCK_SIZE PAGE_SIZE
-#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
-#define RESYNC_WINDOW (2048*1024)
+/* amount of memory to reserve for resync requests */
+#define RESYNC_WINDOW (1024*1024)
+/* maximum number of concurrent requests, memory permitting */
+#define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
 
 /*
  * When performing a resync, we need to read and compare, so
@@ -690,7 +692,6 @@ static int flush_pending_writes(conf_t *conf)
  *    there is no normal IO happeing.  It must arrange to call
  *    lower_barrier when the particular background IO completes.
  */
-#define RESYNC_DEPTH 32
 
 static void raise_barrier(conf_t *conf, int force)
 {
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 40e939675657..224de022e7c5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2568,10 +2568,10 @@ static bool handle_stripe5(struct stripe_head *sh)
                 if (dev->written)
                         s.written++;
                 rdev = rcu_dereference(conf->disks[i].rdev);
-                if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+                if (blocked_rdev == NULL &&
+                    rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
                         blocked_rdev = rdev;
                         atomic_inc(&rdev->nr_pending);
-                        break;
                 }
                 if (!rdev || !test_bit(In_sync, &rdev->flags)) {
                         /* The ReadError flag will just be confusing now */
@@ -2588,8 +2588,14 @@ static bool handle_stripe5(struct stripe_head *sh)
         rcu_read_unlock();
 
         if (unlikely(blocked_rdev)) {
-                set_bit(STRIPE_HANDLE, &sh->state);
-                goto unlock;
+                if (s.syncing || s.expanding || s.expanded ||
+                    s.to_write || s.written) {
+                        set_bit(STRIPE_HANDLE, &sh->state);
+                        goto unlock;
+                }
+                /* There is nothing for the blocked_rdev to block */
+                rdev_dec_pending(blocked_rdev, conf->mddev);
+                blocked_rdev = NULL;
         }
 
         if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
@@ -2832,10 +2838,10 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
                 if (dev->written)
                         s.written++;
                 rdev = rcu_dereference(conf->disks[i].rdev);
-                if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+                if (blocked_rdev == NULL &&
+                    rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
                         blocked_rdev = rdev;
                         atomic_inc(&rdev->nr_pending);
-                        break;
                 }
                 if (!rdev || !test_bit(In_sync, &rdev->flags)) {
                         /* The ReadError flag will just be confusing now */
@@ -2853,9 +2859,16 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
         rcu_read_unlock();
 
         if (unlikely(blocked_rdev)) {
-                set_bit(STRIPE_HANDLE, &sh->state);
-                goto unlock;
+                if (s.syncing || s.expanding || s.expanded ||
+                    s.to_write || s.written) {
+                        set_bit(STRIPE_HANDLE, &sh->state);
+                        goto unlock;
+                }
+                /* There is nothing for the blocked_rdev to block */
+                rdev_dec_pending(blocked_rdev, conf->mddev);
+                blocked_rdev = NULL;
         }
+
         pr_debug("locked=%d uptodate=%d to_read=%d"
                " to_write=%d failed=%d failed_num=%d,%d\n",
                s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
@@ -4446,6 +4459,9 @@ static int raid5_check_reshape(mddev_t *mddev)
                 return -EINVAL; /* Cannot shrink array or change level yet */
         if (mddev->delta_disks == 0)
                 return 0; /* nothing to do */
+        if (mddev->bitmap)
+                /* Cannot grow a bitmap yet */
+                return -EBUSY;
 
         /* Can only proceed if there are plenty of stripe_heads.
          * We need a minimum of one full stripe,, and for sensible progress
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index e7a3fe508dff..b2d9878dc3f0 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -803,11 +803,30 @@ static acpi_status get_u32(u32 *value, u32 cap)
 
 static acpi_status set_u32(u32 value, u32 cap)
 {
+        acpi_status status;
+
         if (interface->capability & cap) {
                 switch (interface->type) {
                 case ACER_AMW0:
                         return AMW0_set_u32(value, cap, interface);
                 case ACER_AMW0_V2:
+                        if (cap == ACER_CAP_MAILLED)
+                                return AMW0_set_u32(value, cap, interface);
+
+                        /*
+                         * On some models, some WMID methods don't toggle
+                         * properly. For those cases, we want to run the AMW0
+                         * method afterwards to be certain we've really toggled
+                         * the device state.
+                         */
+                        if (cap == ACER_CAP_WIRELESS ||
+                                cap == ACER_CAP_BLUETOOTH) {
+                                status = WMID_set_u32(value, cap, interface);
+                                if (ACPI_FAILURE(status))
+                                        return status;
+
+                                return AMW0_set_u32(value, cap, interface);
+                        }
                 case ACER_WMID:
                         return WMID_set_u32(value, cap, interface);
                 default:
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 4251018f70ff..a78f70deeb59 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -279,7 +279,7 @@ struct gru_stats_s {
 #if defined CONFIG_IA64
 #define VADDR_HI_BIT            64
 #define GRUREGION(addr)         ((addr) >> (VADDR_HI_BIT - 3) & 3)
-#elif defined __x86_64
+#elif defined CONFIG_X86_64
 #define VADDR_HI_BIT            48
 #define GRUREGION(addr)         (0)             /* ZZZ could do better */
 #else
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 7c994e1ae276..ae16d845d746 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -595,8 +595,9 @@ static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
         return IRQ_HANDLED;
 }
 
-void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id,
-                              int size, enum s3c2410_dma_buffresult result)
+static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
+                                     void *buf_id, int size,
+                                     enum s3c2410_dma_buffresult result)
 {
         struct s3cmci_host *host = buf_id;
         unsigned long iflags;
@@ -740,8 +741,8 @@ request_done:
         mmc_request_done(host->mmc, mrq);
 }
 
-
-void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source)
+static void s3cmci_dma_setup(struct s3cmci_host *host,
+                             enum s3c2410_dmasrc source)
 {
         static enum s3c2410_dmasrc last_source = -1;
         static int setup_ok;
@@ -1003,8 +1004,9 @@ static void s3cmci_send_request(struct mmc_host *mmc)
         enable_irq(host->irq);
 }
 
-static int s3cmci_card_present(struct s3cmci_host *host)
+static int s3cmci_card_present(struct mmc_host *mmc)
 {
+        struct s3cmci_host *host = mmc_priv(mmc);
         struct s3c24xx_mci_pdata *pdata = host->pdata;
         int ret;
 
@@ -1023,7 +1025,7 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
         host->cmd_is_stop = 0;
         host->mrq = mrq;
 
-        if (s3cmci_card_present(host) == 0) {
+        if (s3cmci_card_present(mmc) == 0) {
                 dbg(host, dbg_err, "%s: no medium present\n", __func__);
                 host->mrq->cmd->error = -ENOMEDIUM;
                 mmc_request_done(mmc, mrq);
@@ -1138,6 +1140,7 @@ static struct mmc_host_ops s3cmci_ops = {
         .request        = s3cmci_request,
         .set_ios        = s3cmci_set_ios,
         .get_ro         = s3cmci_get_ro,
+        .get_cd         = s3cmci_card_present,
 };
 
 static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
@@ -1206,7 +1209,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
         }
 
         host->base = ioremap(host->mem->start, RESSIZE(host->mem));
-        if (host->base == 0) {
+        if (!host->base) {
                 dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
                 ret = -EINVAL;
                 goto probe_free_mem_region;
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index f99e9f721629..1df44d966bdb 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -29,7 +29,6 @@
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/scatterlist.h>
-#include <linux/version.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 64002488c6ee..917cf8d3ae95 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -19,7 +19,7 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <mach/hardware.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
 
 #ifdef CONFIG_MTD_CMDLINE_PARTS
 static const char *part_probes[] = { "cmdlinepart", NULL };
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4bf4f7b205f2..b468f904c7f8 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -40,20 +40,20 @@
 #define DP(__mask, __fmt, __args...) do { \
         if (bp->msglevel & (__mask)) \
                 printk(DP_LEVEL "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-                        bp->dev?(bp->dev->name):"?", ##__args); \
+                        bp->dev ? (bp->dev->name) : "?", ##__args); \
         } while (0)
 
 /* errors debug print */
 #define BNX2X_DBG_ERR(__fmt, __args...) do { \
         if (bp->msglevel & NETIF_MSG_PROBE) \
                 printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-                        bp->dev?(bp->dev->name):"?", ##__args); \
+                        bp->dev ? (bp->dev->name) : "?", ##__args); \
         } while (0)
 
 /* for errors (never masked) */
 #define BNX2X_ERR(__fmt, __args...) do { \
         printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-                bp->dev?(bp->dev->name):"?", ##__args); \
+                bp->dev ? (bp->dev->name) : "?", ##__args); \
         } while (0)
 
 /* before we have a dev->name use dev_info() */
@@ -120,16 +120,8 @@
 #define SHMEM_RD(bp, field)             REG_RD(bp, SHMEM_ADDR(bp, field))
 #define SHMEM_WR(bp, field, val)        REG_WR(bp, SHMEM_ADDR(bp, field), val)
 
-#define NIG_WR(reg, val)        REG_WR(bp, reg, val)
-#define EMAC_WR(reg, val)       REG_WR(bp, emac_base + reg, val)
-#define BMAC_WR(reg, val)       REG_WR(bp, GRCBASE_NIG + bmac_addr + reg, val)
-
-
-#define for_each_queue(bp, var) for (var = 0; var < bp->num_queues; var++)
-
-#define for_each_nondefault_queue(bp, var) \
-                                for (var = 1; var < bp->num_queues; var++)
-#define is_multi(bp)            (bp->num_queues > 1)
+#define EMAC_RD(bp, reg)                REG_RD(bp, emac_base + reg)
+#define EMAC_WR(bp, reg, val)           REG_WR(bp, emac_base + reg, val)
 
 
 /* fast path */
@@ -163,7 +155,7 @@ struct sw_rx_page {
 #define NUM_RX_SGE_PAGES                2
 #define RX_SGE_CNT              (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
 #define MAX_RX_SGE_CNT                  (RX_SGE_CNT - 2)
-/* RX_SGE_CNT is promissed to be a power of 2 */
+/* RX_SGE_CNT is promised to be a power of 2 */
 #define RX_SGE_MASK                     (RX_SGE_CNT - 1)
 #define NUM_RX_SGE                      (RX_SGE_CNT * NUM_RX_SGE_PAGES)
 #define MAX_RX_SGE                      (NUM_RX_SGE - 1)
@@ -258,8 +250,7 @@ struct bnx2x_fastpath {
 
         unsigned long           tx_pkt,
                                 rx_pkt,
-                                rx_calls,
-                                rx_alloc_failed;
+                                rx_calls;
         /* TPA related */
         struct sw_rx_bd         tpa_pool[ETH_MAX_AGGREGATION_QUEUES_E1H];
         u8                      tpa_state[ETH_MAX_AGGREGATION_QUEUES_E1H];
@@ -275,6 +266,15 @@ struct bnx2x_fastpath {
 
 #define bnx2x_fp(bp, nr, var)           (bp->fp[nr].var)
 
+#define BNX2X_HAS_TX_WORK(fp) \
+                        ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \
+                         (fp->tx_pkt_prod != fp->tx_pkt_cons))
+
+#define BNX2X_HAS_RX_WORK(fp) \
+                        (fp->rx_comp_cons != le16_to_cpu(*fp->rx_cons_sb))
+
+#define BNX2X_HAS_WORK(fp)      (BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
+
 
 /* MC hsi */
 #define MAX_FETCH_BD                    13      /* HW max BDs per packet */
@@ -317,7 +317,7 @@ struct bnx2x_fastpath {
 #define RCQ_BD(x)                       ((x) & MAX_RCQ_BD)
 
 
-/* This is needed for determening of last_max */
+/* This is needed for determining of last_max */
 #define SUB_S16(a, b)                   (s16)((s16)(a) - (s16)(b))
 
 #define __SGE_MASK_SET_BIT(el, bit) \
@@ -386,20 +386,28 @@ struct bnx2x_fastpath {
 #define TPA_TYPE(cqe_fp_flags)          ((cqe_fp_flags) & \
                                          (TPA_TYPE_START | TPA_TYPE_END))
 
-#define BNX2X_RX_SUM_OK(cqe) \
-                        (!(cqe->fast_path_cqe.status_flags & \
-                         (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | \
-                          ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)))
+#define ETH_RX_ERROR_FALGS              ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
+
+#define BNX2X_IP_CSUM_ERR(cqe) \
+                        (!((cqe)->fast_path_cqe.status_flags & \
+                           ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \
+                         ((cqe)->fast_path_cqe.type_error_flags & \
+                          ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG))
+
+#define BNX2X_L4_CSUM_ERR(cqe) \
+                        (!((cqe)->fast_path_cqe.status_flags & \
+                           ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \
+                         ((cqe)->fast_path_cqe.type_error_flags & \
+                          ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
+
+#define BNX2X_RX_CSUM_OK(cqe) \
+                        (!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe)))
 
 #define BNX2X_RX_SUM_FIX(cqe) \
                         ((le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) & \
                           PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == \
                          (1 << PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT))
 
-#define ETH_RX_ERROR_FALGS      (ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG | \
-                                 ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | \
-                                 ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)
-
 
 #define FP_USB_FUNC_OFF                 (2 + 2*HC_USTORM_SB_NUM_INDICES)
 #define FP_CSB_FUNC_OFF                 (2 + 2*HC_CSTORM_SB_NUM_INDICES)
@@ -647,6 +655,8 @@ struct bnx2x_eth_stats {
 
         u32 brb_drop_hi;
         u32 brb_drop_lo;
+        u32 brb_truncate_hi;
+        u32 brb_truncate_lo;
 
         u32 jabber_packets_received;
 
@@ -663,6 +673,9 @@ struct bnx2x_eth_stats {
         u32 mac_discard;
 
         u32 driver_xoff;
+        u32 rx_err_discard_pkt;
+        u32 rx_skb_alloc_failed;
+        u32 hw_csum_err;
 };
 
 #define STATS_OFFSET32(stat_name) \
@@ -753,7 +766,6 @@ struct bnx2x {
         u16                     def_att_idx;
         u32                     attn_state;
         struct attn_route       attn_group[MAX_DYNAMIC_ATTN_GRPS];
-        u32                     aeu_mask;
         u32                     nig_mask;
 
         /* slow path ring */
@@ -772,7 +784,7 @@ struct bnx2x {
         u8                      stats_pending;
         u8                      set_mac_pending;
 
-        /* End of fileds used in the performance code paths */
+        /* End of fields used in the performance code paths */
 
         int                     panic;
         int                     msglevel;
@@ -794,9 +806,6 @@ struct bnx2x {
 #define BP_FUNC(bp)                     (bp->func)
 #define BP_E1HVN(bp)                    (bp->func >> 1)
 #define BP_L_ID(bp)                     (BP_E1HVN(bp) << 2)
-/* assorted E1HVN */
-#define IS_E1HMF(bp)                    (bp->e1hmf != 0)
-#define BP_MAX_QUEUES(bp)               (IS_E1HMF(bp) ? 4 : 16)
 
         int                     pm_cap;
         int                     pcie_cap;
@@ -821,6 +830,7 @@ struct bnx2x {
         u32                     mf_config;
         u16                     e1hov;
         u8                      e1hmf;
+#define IS_E1HMF(bp)                    (bp->e1hmf != 0)
 
         u8                      wol;
 
@@ -836,7 +846,6 @@ struct bnx2x {
         u16                     rx_ticks_int;
         u16                     rx_ticks;
 
-        u32                     stats_ticks;
         u32                     lin_cnt;
 
         int                     state;
@@ -852,6 +861,7 @@ struct bnx2x {
 #define BNX2X_STATE_ERROR               0xf000
 
         int                     num_queues;
+#define BP_MAX_QUEUES(bp)               (IS_E1HMF(bp) ? 4 : 16)
 
         u32                     rx_mode;
 #define BNX2X_RX_MODE_NONE              0
@@ -902,10 +912,17 @@ struct bnx2x {
 };
 
 
+#define for_each_queue(bp, var) for (var = 0; var < bp->num_queues; var++)
+
+#define for_each_nondefault_queue(bp, var) \
+                                for (var = 1; var < bp->num_queues; var++)
+#define is_multi(bp)            (bp->num_queues > 1)
+
+
 void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
 void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
                       u32 len32);
-int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode);
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
 
 static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
                            int wait)
@@ -976,7 +993,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 #define PCICFG_LINK_SPEED_SHIFT         16
 
 
-#define BNX2X_NUM_STATS                 39
+#define BNX2X_NUM_STATS                 42
 #define BNX2X_NUM_TESTS                 8
 
 #define BNX2X_MAC_LOOPBACK              0
@@ -1007,10 +1024,10 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 /* resolution of the rate shaping timer - 100 usec */
 #define RS_PERIODIC_TIMEOUT_USEC        100
 /* resolution of fairness algorithm in usecs -
-   coefficient for clauclating the actuall t fair */
+   coefficient for calculating the actual t fair */
 #define T_FAIR_COEF                     10000000
 /* number of bytes in single QM arbitration cycle -
-   coeffiecnt for calculating the fairness timer */
+   coefficient for calculating the fairness timer */
 #define QM_ARB_BYTES                    40000
 #define FAIR_MEM                        2
 
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index e3da7f69d27b..192fa981b930 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -9,165 +9,171 @@
 
 
 #define CSTORM_ASSERT_LIST_INDEX_OFFSET \
-        (IS_E1H_OFFSET? 0x7000 : 0x1000)
+        (IS_E1H_OFFSET ? 0x7000 : 0x1000)
 #define CSTORM_ASSERT_LIST_OFFSET(idx) \
-        (IS_E1H_OFFSET? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+        (IS_E1H_OFFSET ? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define CSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-        (IS_E1H_OFFSET? (0x8522 + ((function>>1) * 0x40) + ((function&1) \
-        * 0x100) + (index * 0x4)) : (0x1922 + (function * 0x40) + (index \
-        * 0x4)))
+        (IS_E1H_OFFSET ? (0x8522 + ((function>>1) * 0x40) + \
+        ((function&1) * 0x100) + (index * 0x4)) : (0x1922 + (function * \
+        0x40) + (index * 0x4)))
 #define CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x8500 + ((function>>1) * 0x40) + ((function&1) \
-        * 0x100)) : (0x1900 + (function * 0x40)))
+        (IS_E1H_OFFSET ? (0x8500 + ((function>>1) * 0x40) + \
+        ((function&1) * 0x100)) : (0x1900 + (function * 0x40)))
 #define CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x8508 + ((function>>1) * 0x40) + ((function&1) \
-        * 0x100)) : (0x1908 + (function * 0x40)))
+        (IS_E1H_OFFSET ? (0x8508 + ((function>>1) * 0x40) + \
+        ((function&1) * 0x100)) : (0x1908 + (function * 0x40)))
 #define CSTORM_FUNCTION_MODE_OFFSET \
-        (IS_E1H_OFFSET? 0x11e8 : 0xffffffff)
+        (IS_E1H_OFFSET ? 0x11e8 : 0xffffffff)
 #define CSTORM_HC_BTR_OFFSET(port) \
-        (IS_E1H_OFFSET? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
+        (IS_E1H_OFFSET ? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
 #define CSTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
-        (IS_E1H_OFFSET? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
+        (IS_E1H_OFFSET ? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
         (index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
         (index * 0x4)))
 #define CSTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
-        (IS_E1H_OFFSET? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
+        (IS_E1H_OFFSET ? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
         (index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
         (index * 0x4)))
 #define CSTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
-        (IS_E1H_OFFSET? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
+        (IS_E1H_OFFSET ? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
         (0x1400 + (port * 0x280) + (cpu_id * 0x28)))
 #define CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
-        (IS_E1H_OFFSET? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
+        (IS_E1H_OFFSET ? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
         (0x1408 + (port * 0x280) + (cpu_id * 0x28)))
 #define CSTORM_STATS_FLAGS_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x1108 + (function * 0x8)) : (0x5108 + \
+        (IS_E1H_OFFSET ? (0x1108 + (function * 0x8)) : (0x5108 + \
         (function * 0x8)))
 #define TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x31c0 + (function * 0x20)) : 0xffffffff)
+        (IS_E1H_OFFSET ? (0x31c0 + (function * 0x20)) : 0xffffffff)
 #define TSTORM_ASSERT_LIST_INDEX_OFFSET \
-        (IS_E1H_OFFSET? 0xa000 : 0x1000)
+        (IS_E1H_OFFSET ? 0xa000 : 0x1000)
 #define TSTORM_ASSERT_LIST_OFFSET(idx) \
-        (IS_E1H_OFFSET? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+        (IS_E1H_OFFSET ? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) \
-        (IS_E1H_OFFSET? (0x3358 + (port * 0x3e8) + (client_id * 0x28)) : \
-        (0x9c8 + (port * 0x2f8) + (client_id * 0x28)))
+        (IS_E1H_OFFSET ? (0x3358 + (port * 0x3e8) + (client_id * 0x28)) \
+        : (0x9c8 + (port * 0x2f8) + (client_id * 0x28)))
 #define TSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-        (IS_E1H_OFFSET? (0xb01a + ((function>>1) * 0x28) + ((function&1) \
-        * 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
-        0x4)))
+        (IS_E1H_OFFSET ? (0xb01a + ((function>>1) * 0x28) + \
+        ((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
+        0x28) + (index * 0x4)))
 #define TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-        (IS_E1H_OFFSET? (0xb000 + ((function>>1) * 0x28) + ((function&1) \
-        * 0xa0)) : (0x1400 + (function * 0x28)))
+        (IS_E1H_OFFSET ? (0xb000 + ((function>>1) * 0x28) + \
+        ((function&1) * 0xa0)) : (0x1400 + (function * 0x28)))
 #define TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-        (IS_E1H_OFFSET? (0xb008 + ((function>>1) * 0x28) + ((function&1) \
-        * 0xa0)) : (0x1408 + (function * 0x28)))
+        (IS_E1H_OFFSET ? (0xb008 + ((function>>1) * 0x28) + \
+        ((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
 #define TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x2b80 + (function * 0x8)) : (0x4b68 + \
+        (IS_E1H_OFFSET ? (0x2b80 + (function * 0x8)) : (0x4b68 + \
         (function * 0x8)))
 #define TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x3000 + (function * 0x38)) : (0x1500 + \
+        (IS_E1H_OFFSET ? (0x3000 + (function * 0x38)) : (0x1500 + \
         (function * 0x38)))
 #define TSTORM_FUNCTION_MODE_OFFSET \
-        (IS_E1H_OFFSET? 0x1ad0 : 0xffffffff)
+        (IS_E1H_OFFSET ? 0x1ad0 : 0xffffffff)
 #define TSTORM_HC_BTR_OFFSET(port) \
-        (IS_E1H_OFFSET? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+        (IS_E1H_OFFSET ? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
 #define TSTORM_INDIRECTION_TABLE_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x12c8 + (function * 0x80)) : (0x22c8 + \
+        (IS_E1H_OFFSET ? (0x12c8 + (function * 0x80)) : (0x22c8 + \
         (function * 0x80)))
 #define TSTORM_INDIRECTION_TABLE_SIZE 0x80
 #define TSTORM_MAC_FILTER_CONFIG_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x3008 + (function * 0x38)) : (0x1508 + \
+        (IS_E1H_OFFSET ? (0x3008 + (function * 0x38)) : (0x1508 + \
         (function * 0x38)))
+#define TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
+        (IS_E1H_OFFSET ? (0x2010 + (port * 0x5b0) + (stats_counter_id * \
+        0x50)) : (0x4000 + (port * 0x3f0) + (stats_counter_id * 0x38)))
 #define TSTORM_RX_PRODS_OFFSET(port, client_id) \
-        (IS_E1H_OFFSET? (0x3350 + (port * 0x3e8) + (client_id * 0x28)) : \
-        (0x9c0 + (port * 0x2f8) + (client_id * 0x28)))
+        (IS_E1H_OFFSET ? (0x3350 + (port * 0x3e8) + (client_id * 0x28)) \
+        : (0x9c0 + (port * 0x2f8) + (client_id * 0x28)))
 #define TSTORM_STATS_FLAGS_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x2c00 + (function * 0x8)) : (0x4b88 + \
+        (IS_E1H_OFFSET ? (0x2c00 + (function * 0x8)) : (0x4b88 + \
         (function * 0x8)))
-#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET? 0x3b30 : 0x1c20)
-#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET? 0xa040 : 0x2c10)
-#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET? 0x2440 : 0x1200)
+#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET ? 0x3b30 : 0x1c20)
+#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET ? 0xa040 : 0x2c10)
+#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET ? 0x2440 : 0x1200)
 #define USTORM_ASSERT_LIST_INDEX_OFFSET \
-        (IS_E1H_OFFSET? 0x8000 : 0x1000)
+        (IS_E1H_OFFSET ? 0x8000 : 0x1000)
 #define USTORM_ASSERT_LIST_OFFSET(idx) \
-        (IS_E1H_OFFSET? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+        (IS_E1H_OFFSET ? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define USTORM_CQE_PAGE_BASE_OFFSET(port, clientId) \
-        (IS_E1H_OFFSET? (0x3298 + (port * 0x258) + (clientId * 0x18)) : \
+        (IS_E1H_OFFSET ? (0x3298 + (port * 0x258) + (clientId * 0x18)) : \
         (0x5450 + (port * 0x1c8) + (clientId * 0x18)))
 #define USTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-        (IS_E1H_OFFSET? (0x951a + ((function>>1) * 0x28) + ((function&1) \
-        * 0xa0) + (index * 0x4)) : (0x191a + (function * 0x28) + (index * \
-        0x4)))
+        (IS_E1H_OFFSET ? (0x951a + ((function>>1) * 0x28) + \
+        ((function&1) * 0xa0) + (index * 0x4)) : (0x191a + (function * \
+        0x28) + (index * 0x4)))
 #define USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x9500 + ((function>>1) * 0x28) + ((function&1) \
-        * 0xa0)) : (0x1900 + (function * 0x28)))
+        (IS_E1H_OFFSET ? (0x9500 + ((function>>1) * 0x28) + \
+        ((function&1) * 0xa0)) : (0x1900 + (function * 0x28)))
 #define USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x9508 + ((function>>1) * 0x28) + ((function&1) \
-        * 0xa0)) : (0x1908 + (function * 0x28)))
+        (IS_E1H_OFFSET ? (0x9508 + ((function>>1) * 0x28) + \
+        ((function&1) * 0xa0)) : (0x1908 + (function * 0x28)))
 #define USTORM_FUNCTION_MODE_OFFSET \
-        (IS_E1H_OFFSET? 0x2448 : 0xffffffff)
+        (IS_E1H_OFFSET ? 0x2448 : 0xffffffff)
 #define USTORM_HC_BTR_OFFSET(port) \
-        (IS_E1H_OFFSET? (0x9644 + (port * 0xd0)) : (0x1954 + (port * 0xb8)))
+        (IS_E1H_OFFSET ? (0x9644 + (port * 0xd0)) : (0x1954 + (port * 0xb8)))
 #define USTORM_MAX_AGG_SIZE_OFFSET(port, clientId) \
-        (IS_E1H_OFFSET? (0x3290 + (port * 0x258) + (clientId * 0x18)) : \
+        (IS_E1H_OFFSET ? (0x3290 + (port * 0x258) + (clientId * 0x18)) : \
         (0x5448 + (port * 0x1c8) + (clientId * 0x18)))
 #define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x2408 + (function * 0x8)) : (0x5408 + \
+        (IS_E1H_OFFSET ? (0x2408 + (function * 0x8)) : (0x5408 + \
         (function * 0x8)))
 #define USTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
-        (IS_E1H_OFFSET? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
+        (IS_E1H_OFFSET ? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
         (index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
         (index * 0x4)))
 #define USTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
-        (IS_E1H_OFFSET? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
+        (IS_E1H_OFFSET ? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
         (index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
         (index * 0x4)))
 #define USTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
-        (IS_E1H_OFFSET? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
+        (IS_E1H_OFFSET ? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
         (0x1400 + (port * 0x280) + (cpu_id * 0x28)))
 #define USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
-        (IS_E1H_OFFSET? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
+        (IS_E1H_OFFSET ? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
         (0x1408 + (port * 0x280) + (cpu_id * 0x28)))
 #define XSTORM_ASSERT_LIST_INDEX_OFFSET \
-        (IS_E1H_OFFSET? 0x9000 : 0x1000)
+        (IS_E1H_OFFSET ? 0x9000 : 0x1000)
 #define XSTORM_ASSERT_LIST_OFFSET(idx) \
-        (IS_E1H_OFFSET? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+        (IS_E1H_OFFSET ? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) \
-        (IS_E1H_OFFSET? (0x24a8 + (port * 0x40)) : (0x3ba0 + (port * 0x40)))
+        (IS_E1H_OFFSET ? (0x24a8 + (port * 0x40)) : (0x3ba0 + (port * 0x40)))
 #define XSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-        (IS_E1H_OFFSET? (0xa01a + ((function>>1) * 0x28) + ((function&1) \
-        * 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
-        0x4)))
+        (IS_E1H_OFFSET ? (0xa01a + ((function>>1) * 0x28) + \
+        ((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
+        0x28) + (index * 0x4)))
 #define XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-        (IS_E1H_OFFSET? (0xa000 + ((function>>1) * 0x28) + ((function&1) \
-        * 0xa0)) : (0x1400 + (function * 0x28)))
+        (IS_E1H_OFFSET ? (0xa000 + ((function>>1) * 0x28) + \
+        ((function&1) * 0xa0)) : (0x1400 + (function * 0x28)))
 #define XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-        (IS_E1H_OFFSET? (0xa008 + ((function>>1) * 0x28) + ((function&1) \
-        * 0xa0)) : (0x1408 + (function * 0x28)))
+        (IS_E1H_OFFSET ? (0xa008 + ((function>>1) * 0x28) + \
+        ((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
 #define XSTORM_E1HOV_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x2ab8 + (function * 0x2)) : 0xffffffff)
+        (IS_E1H_OFFSET ? (0x2ab8 + (function * 0x2)) : 0xffffffff)
 #define XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x2418 + (function * 0x8)) : (0x3b70 + \
+        (IS_E1H_OFFSET ? (0x2418 + (function * 0x8)) : (0x3b70 + \
         (function * 0x8)))
 #define XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x2568 + (function * 0x70)) : (0x3c60 + \
+        (IS_E1H_OFFSET ? (0x2568 + (function * 0x70)) : (0x3c60 + \
         (function * 0x70)))
 #define XSTORM_FUNCTION_MODE_OFFSET \
-        (IS_E1H_OFFSET? 0x2ac8 : 0xffffffff)
+        (IS_E1H_OFFSET ? 0x2ac8 : 0xffffffff)
 #define XSTORM_HC_BTR_OFFSET(port) \
-        (IS_E1H_OFFSET? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+        (IS_E1H_OFFSET ? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+#define XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
+        (IS_E1H_OFFSET ? (0xc000 + (port * 0x3f0) + (stats_counter_id * \
+        0x38)) : (0x3378 + (port * 0x3f0) + (stats_counter_id * 0x38)))
 #define XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x2528 + (function * 0x70)) : (0x3c20 + \
+        (IS_E1H_OFFSET ? (0x2528 + (function * 0x70)) : (0x3c20 + \
         (function * 0x70)))
 #define XSTORM_SPQ_PAGE_BASE_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x2000 + (function * 0x10)) : (0x3328 + \
+        (IS_E1H_OFFSET ? (0x2000 + (function * 0x10)) : (0x3328 + \
         (function * 0x10)))
 #define XSTORM_SPQ_PROD_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x2008 + (function * 0x10)) : (0x3330 + \
+        (IS_E1H_OFFSET ? (0x2008 + (function * 0x10)) : (0x3330 + \
         (function * 0x10)))
 #define XSTORM_STATS_FLAGS_OFFSET(function) \
-        (IS_E1H_OFFSET? (0x23d8 + (function * 0x8)) : (0x3b60 + \
+        (IS_E1H_OFFSET ? (0x23d8 + (function * 0x8)) : (0x3b60 + \
         (function * 0x8)))
 #define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0
 
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index d3e8198d7dba..efd764427fa1 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1268,7 +1268,7 @@ struct doorbell {
 
 
 /*
- * IGU driver acknowlegement register
+ * IGU driver acknowledgement register
  */
 struct igu_ack_register {
 #if defined(__BIG_ENDIAN)
@@ -1882,7 +1882,7 @@ struct timers_block_context {
 };
 
 /*
- * structure for easy accessability to assembler
+ * structure for easy accessibility to assembler
  */
 struct eth_tx_bd_flags {
         u8 as_bitfield;
@@ -2044,7 +2044,7 @@ struct eth_context {
 
 
 /*
- * ethernet doorbell
+ * Ethernet doorbell
  */
 struct eth_tx_doorbell {
 #if defined(__BIG_ENDIAN)
@@ -2256,7 +2256,7 @@ struct ramrod_data {
 };
 
 /*
- * union for ramrod data for ethernet protocol (CQE) (force size of 16 bits)
+ * union for ramrod data for Ethernet protocol (CQE) (force size of 16 bits)
  */
 union eth_ramrod_data {
         struct ramrod_data general;
@@ -2330,7 +2330,7 @@ struct spe_hdr {
 };
 
 /*
- * ethernet slow path element
+ * Ethernet slow path element
  */
 union eth_specific_data {
         u8 protocol_data[8];
@@ -2343,7 +2343,7 @@ union eth_specific_data {
 };
 
 /*
- * ethernet slow path element
+ * Ethernet slow path element
  */
 struct eth_spe {
         struct spe_hdr hdr;
@@ -2615,7 +2615,7 @@ struct tstorm_eth_rx_producers {
 
 
 /*
- * common flag to indicate existance of TPA.
+ * common flag to indicate existence of TPA.
  */
 struct tstorm_eth_tpa_exist {
 #if defined(__BIG_ENDIAN)
@@ -2765,7 +2765,7 @@ struct tstorm_common_stats {
 };
 
 /*
- * Eth statistics query sturcture for the eth_stats_quesry ramrod
+ * Eth statistics query structure for the eth_stats_query ramrod
  */
 struct eth_stats_query {
         struct xstorm_common_stats xstorm_common;
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 4c7750789b62..130927cfc75b 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -72,26 +72,26 @@
 
 
 struct raw_op {
-        u32 op          :8;
-        u32 offset      :24;
+        u32 op:8;
+        u32 offset:24;
         u32 raw_data;
 };
 
 struct op_read {
-        u32 op          :8;
-        u32 offset      :24;
+        u32 op:8;
+        u32 offset:24;
         u32 pad;
 };
 
 struct op_write {
-        u32 op          :8;
-        u32 offset      :24;
+        u32 op:8;
+        u32 offset:24;
         u32 val;
 };
 
 struct op_string_write {
-        u32 op          :8;
-        u32 offset      :24;
+        u32 op:8;
+        u32 offset:24;
 #ifdef __LITTLE_ENDIAN
         u16 data_off;
         u16 data_len;
@@ -102,8 +102,8 @@ struct op_string_write {
 };
 
 struct op_zero {
-        u32 op          :8;
-        u32 offset      :24;
+        u32 op:8;
+        u32 offset:24;
         u32 len;
 };
 
@@ -208,7 +208,7 @@ static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
 /*********************************************************
    There are different blobs for each PRAM section.
    In addition, each blob write operation is divided into a few operations
-   in order to decrease the amount of phys. contigious buffer needed.
+   in order to decrease the amount of phys. contiguous buffer needed.
    Thus, when we select a blob the address may be with some offset
    from the beginning of PRAM section.
    The same holds for the INT_TABLE sections.
@@ -336,7 +336,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
                 len = op->str_wr.data_len;
                 data = data_base + op->str_wr.data_off;
 
-                /* carefull! it must be in order */
+                /* careful! it must be in order */
                 if (unlikely(op_type > OP_WB)) {
 
                         /* If E1 only */
@@ -740,7 +740,7 @@ static u8 calc_crc8(u32 data, u8 crc)
         return crc_res;
 }
 
-/* regiesers addresses are not in order
+/* registers addresses are not in order
    so these arrays help simplify the code */
 static const int cm_start[E1H_FUNC_MAX][9] = {
         {MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
diff --git a/drivers/net/bnx2x_init_values.h b/drivers/net/bnx2x_init_values.h
index 63019055e4bb..9755bf6b08dd 100644
--- a/drivers/net/bnx2x_init_values.h
+++ b/drivers/net/bnx2x_init_values.h
@@ -901,31 +901,28 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3760, 0x4},
         {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1e20, 0x42},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3738, 0x9},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3000, 0x400},
+        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b68, 0x2},
         {OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x3738 + 0x24, 0x10293},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c00, 0x2},
+        {OP_SW_E1, USEM_REG_FAST_MEMORY + 0x4b68 + 0x8, 0x20278},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3180, 0x42},
-        {OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2c00 + 0x8, 0x20278},
+        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b10, 0x2},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x400},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b68, 0x2},
+        {OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x2027a},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4000, 0x2},
-        {OP_SW_E1, USEM_REG_FAST_MEMORY + 0x4b68 + 0x8, 0x2027a},
         {OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x4000 + 0x8, 0x20294},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b10, 0x2},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b68, 0x2},
-        {OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x2027c},
         {OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x6b68 + 0x8, 0x20296},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b10, 0x2},
         {OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x74c0, 0x20298},
         {OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-        {OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x10027e},
+        {OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x10027c},
         {OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c00, 0x10029a},
         {OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x0},
-        {OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x10028e},
+        {OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x10028c},
         {OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c40, 0x1002aa},
         {OP_ZP_E1, USEM_REG_INT_TABLE, 0xc20000},
         {OP_ZP_E1H, USEM_REG_INT_TABLE, 0xc40000},
-        {OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x13029e},
+        {OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x13029c},
         {OP_WR_64_E1H, USEM_REG_INT_TABLE + 0x368, 0x1302ba},
         {OP_ZP_E1, USEM_REG_PRAM, 0x311c0000},
         {OP_ZP_E1H, USEM_REG_PRAM, 0x31070000},
@@ -933,11 +930,11 @@ static const struct raw_op init_ops[] = {
         {OP_ZP_E1H, USEM_REG_PRAM + 0x8000, 0x330e0c42},
         {OP_ZP_E1, USEM_REG_PRAM + 0x10000, 0x38561919},
         {OP_ZP_E1H, USEM_REG_PRAM + 0x10000, 0x389b1906},
-        {OP_WR_64_E1, USEM_REG_PRAM + 0x17fe0, 0x500402a0},
+        {OP_WR_64_E1, USEM_REG_PRAM + 0x17fe0, 0x5004029e},
         {OP_ZP_E1H, USEM_REG_PRAM + 0x18000, 0x132272d},
         {OP_WR_64_E1H, USEM_REG_PRAM + 0x18250, 0x4fb602bc},
-#define USEM_COMMON_END         790
-#define USEM_PORT0_START        790
+#define USEM_COMMON_END         787
+#define USEM_PORT0_START        787
         {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1400, 0xa0},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9000, 0xa0},
         {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1900, 0xa},
@@ -950,44 +947,27 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3288, 0x96},
         {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5440, 0x72},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3000, 0x20},
+        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b78, 0x52},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5100, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3100, 0x20},
+        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e08, 0xc},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5200, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3200, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5300, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3300, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5400, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3400, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5500, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3500, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5600, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3600, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5700, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3700, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5800, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3800, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5900, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3900, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a00, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3a00, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b00, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3b00, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c00, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3c00, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d00, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3d00, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e00, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3e00, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f00, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3f00, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b78, 0x52},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c10, 0x2},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e08, 0xc},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b78, 0x52},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e08, 0xc},
-#define USEM_PORT0_END          838
-#define USEM_PORT1_START        838
+#define USEM_PORT0_END          818
+#define USEM_PORT1_START        818
         {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1680, 0xa0},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9280, 0xa0},
         {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1928, 0xa},
@@ -1000,76 +980,59 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x34e0, 0x96},
         {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5608, 0x72},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5080, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3080, 0x20},
+        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4cc0, 0x52},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5180, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3180, 0x20},
+        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e38, 0xc},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5280, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3280, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5380, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3380, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5480, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3480, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5580, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3580, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5680, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3680, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5780, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3780, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5880, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3880, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5980, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3980, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a80, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3a80, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b80, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3b80, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c80, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3c80, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d80, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3d80, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e80, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3e80, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f80, 0x20},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3f80, 0x20},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6cc0, 0x52},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c20, 0x2},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e38, 0xc},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4cc0, 0x52},
-        {OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e38, 0xc},
-#define USEM_PORT1_END          886
-#define USEM_FUNC0_START        886
+#define USEM_PORT1_END          849
+#define USEM_FUNC0_START        849
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3000, 0x4},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4010, 0x2},
-#define USEM_FUNC0_END          888
-#define USEM_FUNC1_START        888
+#define USEM_FUNC0_END          851
+#define USEM_FUNC1_START        851
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3010, 0x4},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4020, 0x2},
-#define USEM_FUNC1_END          890
-#define USEM_FUNC2_START        890
+#define USEM_FUNC1_END          853
+#define USEM_FUNC2_START        853
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3020, 0x4},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4030, 0x2},
-#define USEM_FUNC2_END          892
-#define USEM_FUNC3_START        892
+#define USEM_FUNC2_END          855
+#define USEM_FUNC3_START        855
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3030, 0x4},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4040, 0x2},
-#define USEM_FUNC3_END          894
-#define USEM_FUNC4_START        894
+#define USEM_FUNC3_END          857
+#define USEM_FUNC4_START        857
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3040, 0x4},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4050, 0x2},
-#define USEM_FUNC4_END          896
-#define USEM_FUNC5_START        896
+#define USEM_FUNC4_END          859
+#define USEM_FUNC5_START        859
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3050, 0x4},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4060, 0x2},
-#define USEM_FUNC5_END          898
-#define USEM_FUNC6_START        898
+#define USEM_FUNC5_END          861
+#define USEM_FUNC6_START        861
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3060, 0x4},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4070, 0x2},
-#define USEM_FUNC6_END          900
-#define USEM_FUNC7_START        900
+#define USEM_FUNC6_END          863
+#define USEM_FUNC7_START        863
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3070, 0x4},
         {OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4080, 0x2},
-#define USEM_FUNC7_END          902
-#define CSEM_COMMON_START       902
+#define USEM_FUNC7_END          865
+#define CSEM_COMMON_START       865
         {OP_RD, CSEM_REG_MSG_NUM_FIC0, 0x0},
         {OP_RD, CSEM_REG_MSG_NUM_FIC1, 0x0},
         {OP_RD, CSEM_REG_MSG_NUM_FOC0, 0x0},
@@ -1128,29 +1091,29 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x11e8, 0x0},
         {OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x25c0, 0x240},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3000, 0xc0},
-        {OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a2},
+        {OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4070, 0x80},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x5280, 0x4},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6280, 0x240},
         {OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x6b88, 0x2002be},
         {OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x13fffff},
-        {OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002aa},
+        {OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002a8},
         {OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002de},
         {OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-        {OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002ba},
+        {OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002b8},
         {OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002ee},
         {OP_ZP_E1, CSEM_REG_INT_TABLE, 0x6e0000},
         {OP_ZP_E1H, CSEM_REG_INT_TABLE, 0x6f0000},
-        {OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002ca},
+        {OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002c8},
         {OP_WR_64_E1H, CSEM_REG_INT_TABLE + 0x380, 0x1002fe},
         {OP_ZP_E1, CSEM_REG_PRAM, 0x32580000},
         {OP_ZP_E1H, CSEM_REG_PRAM, 0x31fa0000},
         {OP_ZP_E1, CSEM_REG_PRAM + 0x8000, 0x18270c96},
         {OP_ZP_E1H, CSEM_REG_PRAM + 0x8000, 0x19040c7f},
-        {OP_WR_64_E1, CSEM_REG_PRAM + 0xb210, 0x682402cc},
+        {OP_WR_64_E1, CSEM_REG_PRAM + 0xb210, 0x682402ca},
         {OP_WR_64_E1H, CSEM_REG_PRAM + 0xb430, 0x67e00300},
-#define CSEM_COMMON_END         981
-#define CSEM_PORT0_START        981
+#define CSEM_COMMON_END         944
+#define CSEM_PORT0_START        944
         {OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1400, 0xa0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8000, 0xa0},
         {OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1900, 0x10},
@@ -1163,8 +1126,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6040, 0x30},
         {OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3040, 0x6},
         {OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2410, 0x30},
-#define CSEM_PORT0_END          993
-#define CSEM_PORT1_START        993
+#define CSEM_PORT0_END          956
+#define CSEM_PORT1_START        956
         {OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1680, 0xa0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8280, 0xa0},
         {OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1940, 0x10},
@@ -1177,43 +1140,43 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6100, 0x30},
         {OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3058, 0x6},
         {OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x24d0, 0x30},
-#define CSEM_PORT1_END          1005
-#define CSEM_FUNC0_START        1005
+#define CSEM_PORT1_END          968
+#define CSEM_FUNC0_START        968
         {OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1148, 0x0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3300, 0x2},
-#define CSEM_FUNC0_END          1007
-#define CSEM_FUNC1_START        1007
+#define CSEM_FUNC0_END          970
+#define CSEM_FUNC1_START        970
         {OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x114c, 0x0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3308, 0x2},
-#define CSEM_FUNC1_END          1009
-#define CSEM_FUNC2_START        1009
+#define CSEM_FUNC1_END          972
+#define CSEM_FUNC2_START        972
         {OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1150, 0x0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3310, 0x2},
-#define CSEM_FUNC2_END          1011
-#define CSEM_FUNC3_START        1011
+#define CSEM_FUNC2_END          974
+#define CSEM_FUNC3_START        974
         {OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1154, 0x0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3318, 0x2},
-#define CSEM_FUNC3_END          1013
-#define CSEM_FUNC4_START        1013
+#define CSEM_FUNC3_END          976
+#define CSEM_FUNC4_START        976
         {OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1158, 0x0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3320, 0x2},
-#define CSEM_FUNC4_END          1015
-#define CSEM_FUNC5_START        1015
+#define CSEM_FUNC4_END          978
+#define CSEM_FUNC5_START        978
         {OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x115c, 0x0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3328, 0x2},
-#define CSEM_FUNC5_END          1017
-#define CSEM_FUNC6_START        1017
+#define CSEM_FUNC5_END          980
+#define CSEM_FUNC6_START        980
         {OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1160, 0x0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3330, 0x2},
-#define CSEM_FUNC6_END          1019
-#define CSEM_FUNC7_START        1019
+#define CSEM_FUNC6_END          982
+#define CSEM_FUNC7_START        982
         {OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1164, 0x0},
         {OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3338, 0x2},
-#define CSEM_FUNC7_END          1021
-#define XPB_COMMON_START        1021
+#define CSEM_FUNC7_END          984
+#define XPB_COMMON_START        984
         {OP_WR, GRCBASE_XPB + PB_REG_CONTROL, 0x20},
-#define XPB_COMMON_END          1022
-#define DQ_COMMON_START         1022
+#define XPB_COMMON_END          985
+#define DQ_COMMON_START         985
         {OP_WR, DORQ_REG_MODE_ACT, 0x2},
         {OP_WR, DORQ_REG_NORM_CID_OFST, 0x3},
         {OP_WR, DORQ_REG_OUTST_REQ, 0x4},
@@ -1232,8 +1195,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR, DORQ_REG_DQ_FIFO_AFULL_TH, 0x76c},
         {OP_WR, DORQ_REG_REGN, 0x7c1004},
         {OP_WR, DORQ_REG_IF_EN, 0xf},
-#define DQ_COMMON_END           1040
-#define TIMERS_COMMON_START     1040
+#define DQ_COMMON_END           1003
+#define TIMERS_COMMON_START     1003
         {OP_ZR, TM_REG_CLIN_PRIOR0_CLIENT, 0x2},
         {OP_WR, TM_REG_LIN_SETCLR_FIFO_ALFULL_THR, 0x1c},
         {OP_WR, TM_REG_CFC_AC_CRDCNT_VAL, 0x1},
@@ -1256,14 +1219,14 @@ static const struct raw_op init_ops[] = {
         {OP_WR, TM_REG_EN_CL0_INPUT, 0x1},
         {OP_WR, TM_REG_EN_CL1_INPUT, 0x1},
         {OP_WR, TM_REG_EN_CL2_INPUT, 0x1},
-#define TIMERS_COMMON_END       1062
-#define TIMERS_PORT0_START      1062
+#define TIMERS_COMMON_END       1025
+#define TIMERS_PORT0_START      1025
         {OP_ZR, TM_REG_LIN0_PHY_ADDR, 0x2},
-#define TIMERS_PORT0_END        1063
-#define TIMERS_PORT1_START      1063
+#define TIMERS_PORT0_END        1026
+#define TIMERS_PORT1_START      1026
         {OP_ZR, TM_REG_LIN1_PHY_ADDR, 0x2},
-#define TIMERS_PORT1_END        1064
-#define XSDM_COMMON_START       1064
+#define TIMERS_PORT1_END        1027
+#define XSDM_COMMON_START       1027
         {OP_WR_E1, XSDM_REG_CFC_RSP_START_ADDR, 0x614},
         {OP_WR_E1H, XSDM_REG_CFC_RSP_START_ADDR, 0x424},
         {OP_WR_E1, XSDM_REG_CMP_COUNTER_START_ADDR, 0x600},
@@ -1311,8 +1274,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_ASIC, XSDM_REG_TIMER_TICK, 0x3e8},
         {OP_WR_EMUL, XSDM_REG_TIMER_TICK, 0x1},
         {OP_WR_FPGA, XSDM_REG_TIMER_TICK, 0xa},
-#define XSDM_COMMON_END         1111
-#define QM_COMMON_START         1111
+#define XSDM_COMMON_END         1074
+#define QM_COMMON_START         1074
         {OP_WR, QM_REG_ACTCTRINITVAL_0, 0x6},
         {OP_WR, QM_REG_ACTCTRINITVAL_1, 0x5},
         {OP_WR, QM_REG_ACTCTRINITVAL_2, 0xa},
@@ -1613,8 +1576,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, QM_REG_PQ2PCIFUNC_6, 0x5},
         {OP_WR_E1H, QM_REG_PQ2PCIFUNC_7, 0x7},
         {OP_WR, QM_REG_CMINTEN, 0xff},
-#define QM_COMMON_END           1411
-#define PBF_COMMON_START        1411
+#define QM_COMMON_END           1374
+#define PBF_COMMON_START        1374
         {OP_WR, PBF_REG_INIT, 0x1},
         {OP_WR, PBF_REG_INIT_P4, 0x1},
         {OP_WR, PBF_REG_MAC_LB_ENABLE, 0x1},
@@ -1622,20 +1585,20 @@ static const struct raw_op init_ops[] = {
         {OP_WR, PBF_REG_INIT_P4, 0x0},
         {OP_WR, PBF_REG_INIT, 0x0},
         {OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P4, 0x0},
-#define PBF_COMMON_END          1418
-#define PBF_PORT0_START         1418
+#define PBF_COMMON_END          1381
+#define PBF_PORT0_START         1381
         {OP_WR, PBF_REG_INIT_P0, 0x1},
         {OP_WR, PBF_REG_MAC_IF0_ENABLE, 0x1},
         {OP_WR, PBF_REG_INIT_P0, 0x0},
         {OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P0, 0x0},
-#define PBF_PORT0_END           1422
-#define PBF_PORT1_START         1422
+#define PBF_PORT0_END           1385
+#define PBF_PORT1_START         1385
         {OP_WR, PBF_REG_INIT_P1, 0x1},
         {OP_WR, PBF_REG_MAC_IF1_ENABLE, 0x1},
         {OP_WR, PBF_REG_INIT_P1, 0x0},
         {OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P1, 0x0},
-#define PBF_PORT1_END           1426
-#define XCM_COMMON_START        1426
+#define PBF_PORT1_END           1389
+#define XCM_COMMON_START        1389
         {OP_WR, XCM_REG_XX_OVFL_EVNT_ID, 0x32},
         {OP_WR, XCM_REG_XQM_XCM_HDR_P, 0x3150020},
         {OP_WR, XCM_REG_XQM_XCM_HDR_S, 0x3150020},
@@ -1670,7 +1633,7 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1, XCM_REG_XX_MSG_NUM, 0x1f},
         {OP_WR_E1H, XCM_REG_XX_MSG_NUM, 0x20},
         {OP_ZR, XCM_REG_XX_TABLE, 0x12},
-        {OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02ce},
+        {OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02cc},
         {OP_SW_E1H, XCM_REG_XX_DESCR_TABLE, 0x1f0302},
         {OP_WR, XCM_REG_N_SM_CTX_LD_0, 0xf},
         {OP_WR, XCM_REG_N_SM_CTX_LD_1, 0x7},
@@ -1700,8 +1663,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR, XCM_REG_CDU_SM_WR_IFEN, 0x1},
         {OP_WR, XCM_REG_CDU_SM_RD_IFEN, 0x1},
         {OP_WR, XCM_REG_XCM_CFC_IFEN, 0x1},
-#define XCM_COMMON_END          1490
-#define XCM_PORT0_START         1490
+#define XCM_COMMON_END          1453
+#define XCM_PORT0_START         1453
         {OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
         {OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
         {OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1710,8 +1673,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1, XCM_REG_WU_DA_CNT_CMD10, 0x2},
         {OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
         {OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-#define XCM_PORT0_END           1498
-#define XCM_PORT1_START         1498
+#define XCM_PORT0_END           1461
+#define XCM_PORT1_START         1461
         {OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
         {OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
         {OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1720,8 +1683,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1, XCM_REG_WU_DA_CNT_CMD11, 0x2},
         {OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
         {OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-#define XCM_PORT1_END           1506
-#define XCM_FUNC0_START         1506
+#define XCM_PORT1_END           1469
+#define XCM_FUNC0_START         1469
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
         {OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1731,8 +1694,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
         {OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC0_END           1515
-#define XCM_FUNC1_START         1515
+#define XCM_FUNC0_END           1478
+#define XCM_FUNC1_START         1478
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
         {OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1742,8 +1705,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
         {OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC1_END           1524
-#define XCM_FUNC2_START         1524
+#define XCM_FUNC1_END           1487
+#define XCM_FUNC2_START         1487
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
         {OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1753,8 +1716,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
         {OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC2_END           1533
-#define XCM_FUNC3_START         1533
+#define XCM_FUNC2_END           1496
+#define XCM_FUNC3_START         1496
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
         {OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1764,8 +1727,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
         {OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC3_END           1542
-#define XCM_FUNC4_START         1542
+#define XCM_FUNC3_END           1505
+#define XCM_FUNC4_START         1505
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
         {OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1775,8 +1738,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
         {OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC4_END           1551
-#define XCM_FUNC5_START         1551
+#define XCM_FUNC4_END           1514
+#define XCM_FUNC5_START         1514
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
         {OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1786,8 +1749,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
         {OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC5_END           1560
-#define XCM_FUNC6_START         1560
+#define XCM_FUNC5_END           1523
+#define XCM_FUNC6_START         1523
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
         {OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1797,8 +1760,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
         {OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC6_END           1569
-#define XCM_FUNC7_START         1569
+#define XCM_FUNC6_END           1532
+#define XCM_FUNC7_START         1532
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
         {OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
         {OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1808,8 +1771,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
         {OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
         {OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC7_END           1578
-#define XSEM_COMMON_START       1578
+#define XCM_FUNC7_END           1541
+#define XSEM_COMMON_START       1541
         {OP_RD, XSEM_REG_MSG_NUM_FIC0, 0x0},
         {OP_RD, XSEM_REG_MSG_NUM_FIC1, 0x0},
         {OP_RD, XSEM_REG_MSG_NUM_FOC0, 0x0},
@@ -1876,9 +1839,9 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x9000, 0x2},
         {OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3368, 0x0},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x21a8, 0x86},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202ed},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202eb},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2000, 0x20},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402ef},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402ed},
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x23c8, 0x0},
         {OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1518, 0x1},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x23d0, 0x20321},
@@ -1886,29 +1849,29 @@ static const struct raw_op init_ops[] = {
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2498, 0x40323},
         {OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1838, 0x0},
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2ac8, 0x0},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202f3},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202f1},
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2ab8, 0x0},
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4ac0, 0x2},
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3010, 0x1},
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b00, 0x4},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x4040, 0x10},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f50, 0x202f5},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f50, 0x202f3},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x4000, 0x100327},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6ac0, 0x2},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b00, 0x4},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x83b0, 0x20337},
         {OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x1002f7},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x1002f5},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c00, 0x100339},
         {OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80307},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80305},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80349},
         {OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x2000000},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8030f},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8030d},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c60, 0x80351},
         {OP_ZP_E1, XSEM_REG_INT_TABLE, 0xa90000},
         {OP_ZP_E1H, XSEM_REG_INT_TABLE, 0xac0000},
-        {OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130317},
+        {OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130315},
         {OP_WR_64_E1H, XSEM_REG_INT_TABLE + 0x368, 0x130359},
         {OP_ZP_E1, XSEM_REG_PRAM, 0x344e0000},
         {OP_ZP_E1H, XSEM_REG_PRAM, 0x34620000},
@@ -1918,10 +1881,10 @@ static const struct raw_op init_ops[] = {
         {OP_ZP_E1H, XSEM_REG_PRAM + 0x10000, 0x3e971b22},
         {OP_ZP_E1, XSEM_REG_PRAM + 0x18000, 0x1dd02ad2},
         {OP_ZP_E1H, XSEM_REG_PRAM + 0x18000, 0x21542ac8},
-        {OP_WR_64_E1, XSEM_REG_PRAM + 0x1c0d0, 0x47e60319},
+        {OP_WR_64_E1, XSEM_REG_PRAM + 0x1c0d0, 0x47e60317},
         {OP_WR_64_E1H, XSEM_REG_PRAM + 0x1c8d0, 0x46e6035b},
-#define XSEM_COMMON_END         1688
-#define XSEM_PORT0_START        1688
+#define XSEM_COMMON_END         1651
+#define XSEM_PORT0_START        1651
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3ba0, 0x10},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc000, 0xfc},
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c20, 0x1c},
@@ -1934,7 +1897,7 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x26e8, 0x1c},
         {OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b58, 0x0},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x27c8, 0x1c},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d10, 0x10031b},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d10, 0x100319},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa000, 0x28},
         {OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1500, 0x0},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa140, 0xc},
@@ -1950,12 +1913,12 @@ static const struct raw_op init_ops[] = {
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ac8, 0x2035d},
         {OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50b8, 0x1},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b10, 0x42},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x2032b},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x20329},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d20, 0x4},
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b10, 0x42},
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d20, 0x4},
-#define XSEM_PORT0_END          1720
-#define XSEM_PORT1_START        1720
+#define XSEM_PORT0_END          1683
+#define XSEM_PORT1_START        1683
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3be0, 0x10},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc3f0, 0xfc},
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c90, 0x1c},
@@ -1968,7 +1931,7 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2758, 0x1c},
         {OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b5c, 0x0},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2838, 0x1c},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d50, 0x10032d},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d50, 0x10032b},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa0a0, 0x28},
         {OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1504, 0x0},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa170, 0xc},
@@ -1984,65 +1947,65 @@ static const struct raw_op init_ops[] = {
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ad0, 0x2035f},
         {OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50bc, 0x1},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6c18, 0x42},
-        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2033d},
+        {OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2033b},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d30, 0x4},
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4c18, 0x42},
         {OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d30, 0x4},
-#define XSEM_PORT1_END          1752
-#define XSEM_FUNC0_START        1752
+#define XSEM_PORT1_END          1715
+#define XSEM_FUNC0_START        1715
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e0, 0x0},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x28b8, 0x100361},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5048, 0xe},
-#define XSEM_FUNC0_END          1755
-#define XSEM_FUNC1_START        1755
+#define XSEM_FUNC0_END          1718
+#define XSEM_FUNC1_START        1718
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e4, 0x0},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x28f8, 0x100371},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5080, 0xe},
-#define XSEM_FUNC1_END          1758
-#define XSEM_FUNC2_START        1758
+#define XSEM_FUNC1_END          1721
+#define XSEM_FUNC2_START        1721
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e8, 0x0},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2938, 0x100381},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50b8, 0xe},
-#define XSEM_FUNC2_END          1761
-#define XSEM_FUNC3_START        1761
+#define XSEM_FUNC2_END          1724
+#define XSEM_FUNC3_START        1724
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7ec, 0x0},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2978, 0x100391},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50f0, 0xe},
-#define XSEM_FUNC3_END          1764
-#define XSEM_FUNC4_START        1764
+#define XSEM_FUNC3_END          1727
+#define XSEM_FUNC4_START        1727
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f0, 0x0},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29b8, 0x1003a1},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5128, 0xe},
-#define XSEM_FUNC4_END          1767
-#define XSEM_FUNC5_START        1767
+#define XSEM_FUNC4_END          1730
+#define XSEM_FUNC5_START        1730
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f4, 0x0},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29f8, 0x1003b1},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5160, 0xe},
-#define XSEM_FUNC5_END          1770
-#define XSEM_FUNC6_START        1770
+#define XSEM_FUNC5_END          1733
+#define XSEM_FUNC6_START        1733
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f8, 0x0},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a38, 0x1003c1},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5198, 0xe},
-#define XSEM_FUNC6_END          1773
-#define XSEM_FUNC7_START        1773
+#define XSEM_FUNC6_END          1736
+#define XSEM_FUNC7_START        1736
         {OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7fc, 0x0},
         {OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a78, 0x1003d1},
         {OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x51d0, 0xe},
-#define XSEM_FUNC7_END          1776
-#define CDU_COMMON_START        1776
+#define XSEM_FUNC7_END          1739
+#define CDU_COMMON_START        1739
         {OP_WR, CDU_REG_CDU_CONTROL0, 0x1},
         {OP_WR_E1H, CDU_REG_MF_MODE, 0x1},
         {OP_WR, CDU_REG_CDU_CHK_MASK0, 0x3d000},
         {OP_WR, CDU_REG_CDU_CHK_MASK1, 0x3d},
-        {OP_WB_E1, CDU_REG_L1TT, 0x200033f},
+        {OP_WB_E1, CDU_REG_L1TT, 0x200033d},
         {OP_WB_E1H, CDU_REG_L1TT, 0x20003e1},
-        {OP_WB_E1, CDU_REG_MATT, 0x20053f},
+        {OP_WB_E1, CDU_REG_MATT, 0x20053d},
         {OP_WB_E1H, CDU_REG_MATT, 0x2805e1},
         {OP_ZR_E1, CDU_REG_MATT + 0x80, 0x2},
-        {OP_WB_E1, CDU_REG_MATT + 0x88, 0x6055f},
+        {OP_WB_E1, CDU_REG_MATT + 0x88, 0x6055d},
         {OP_ZR, CDU_REG_MATT + 0xa0, 0x18},
-#define CDU_COMMON_END          1787
-#define DMAE_COMMON_START       1787
+#define CDU_COMMON_END          1750
+#define DMAE_COMMON_START       1750
         {OP_ZR, DMAE_REG_CMD_MEM, 0xe0},
         {OP_WR, DMAE_REG_CRC16C_INIT, 0x0},
         {OP_WR, DMAE_REG_CRC16T10_INIT, 0x1},
@@ -2050,24 +2013,24 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, DMAE_REG_PXP_REQ_INIT_CRD, 0x2},
         {OP_WR, DMAE_REG_PCI_IFEN, 0x1},
         {OP_WR, DMAE_REG_GRC_IFEN, 0x1},
-#define DMAE_COMMON_END         1794
-#define PXP_COMMON_START        1794
-        {OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50565},
+#define DMAE_COMMON_END         1757
+#define PXP_COMMON_START        1757
+        {OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50563},
         {OP_WB_E1H, PXP_REG_HST_INBOUND_INT + 0x400, 0x50609},
-        {OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x5056a},
+        {OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x50568},
         {OP_WB_E1H, PXP_REG_HST_INBOUND_INT, 0x5060e},
-        {OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5056f},
-#define PXP_COMMON_END          1799
-#define CFC_COMMON_START        1799
+        {OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5056d},
+#define PXP_COMMON_END          1762
+#define CFC_COMMON_START        1762
         {OP_ZR_E1H, CFC_REG_LINK_LIST, 0x100},
         {OP_WR, CFC_REG_CONTROL0, 0x10},
         {OP_WR, CFC_REG_DISABLE_ON_ERROR, 0x3fff},
         {OP_WR, CFC_REG_LCREQ_WEIGHTS, 0x84924a},
-#define CFC_COMMON_END          1803
-#define HC_COMMON_START         1803
+#define CFC_COMMON_END          1766
+#define HC_COMMON_START         1766
         {OP_ZR_E1, HC_REG_USTORM_ADDR_FOR_COALESCE, 0x4},
-#define HC_COMMON_END           1804
-#define HC_PORT0_START          1804
+#define HC_COMMON_END           1767
+#define HC_PORT0_START          1767
         {OP_WR_E1, HC_REG_CONFIG_0, 0x1080},
         {OP_ZR_E1, HC_REG_UC_RAM_ADDR_0, 0x2},
         {OP_WR_E1, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2086,8 +2049,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
         {OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
         {OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_PORT0_END            1822
-#define HC_PORT1_START          1822
+#define HC_PORT0_END            1785
+#define HC_PORT1_START          1785
         {OP_WR_E1, HC_REG_CONFIG_1, 0x1080},
         {OP_ZR_E1, HC_REG_UC_RAM_ADDR_1, 0x2},
         {OP_WR_E1, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2106,8 +2069,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
         {OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
         {OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_PORT1_END            1840
-#define HC_FUNC0_START          1840
+#define HC_PORT1_END            1803
+#define HC_FUNC0_START          1803
         {OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
         {OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x0},
         {OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2123,8 +2086,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC0_END            1855
-#define HC_FUNC1_START          1855
+#define HC_FUNC0_END            1818
+#define HC_FUNC1_START          1818
         {OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
         {OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x1},
         {OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2140,8 +2103,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC1_END            1870
-#define HC_FUNC2_START          1870
+#define HC_FUNC1_END            1833
+#define HC_FUNC2_START          1833
         {OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
         {OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x2},
         {OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2157,8 +2120,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC2_END            1885
-#define HC_FUNC3_START          1885
+#define HC_FUNC2_END            1848
+#define HC_FUNC3_START          1848
         {OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
         {OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x3},
         {OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2174,8 +2137,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC3_END            1900
-#define HC_FUNC4_START          1900
+#define HC_FUNC3_END            1863
+#define HC_FUNC4_START          1863
         {OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
         {OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x4},
         {OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2191,8 +2154,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC4_END            1915
-#define HC_FUNC5_START          1915
+#define HC_FUNC4_END            1878
+#define HC_FUNC5_START          1878
         {OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
         {OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x5},
         {OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2208,8 +2171,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC5_END            1930
-#define HC_FUNC6_START          1930
+#define HC_FUNC5_END            1893
+#define HC_FUNC6_START          1893
         {OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
         {OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x6},
         {OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2225,8 +2188,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC6_END            1945
-#define HC_FUNC7_START          1945
+#define HC_FUNC6_END            1908
+#define HC_FUNC7_START          1908
         {OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
         {OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x7},
         {OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2242,8 +2205,8 @@ static const struct raw_op init_ops[] = {
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
         {OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC7_END            1960
-#define PXP2_COMMON_START       1960
+#define HC_FUNC7_END            1923
+#define PXP2_COMMON_START       1923
         {OP_WR_E1, PXP2_REG_PGL_CONTROL0, 0xe38340},
         {OP_WR_E1H, PXP2_REG_RQ_DRAM_ALIGN, 0x1},
         {OP_WR, PXP2_REG_PGL_CONTROL1, 0x3c10},
@@ -2361,8 +2324,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, PXP2_REG_RQ_ILT_MODE, 0x1},
         {OP_WR, PXP2_REG_RQ_RBC_DONE, 0x1},
         {OP_WR_E1H, PXP2_REG_PGL_CONTROL0, 0xe38340},
-#define PXP2_COMMON_END         2077
-#define MISC_AEU_COMMON_START   2077
+#define PXP2_COMMON_END         2040
+#define MISC_AEU_COMMON_START   2040
         {OP_ZR, MISC_REG_AEU_GENERAL_ATTN_0, 0x16},
         {OP_WR_E1H, MISC_REG_AEU_ENABLE1_NIG_0, 0x55540000},
         {OP_WR_E1H, MISC_REG_AEU_ENABLE2_NIG_0, 0x55555555},
@@ -2382,8 +2345,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1H, MISC_REG_AEU_ENABLE4_PXP_1, 0x0},
         {OP_WR_E1H, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0xc00},
         {OP_WR_E1H, MISC_REG_AEU_GENERAL_MASK, 0x3},
-#define MISC_AEU_COMMON_END     2096
-#define MISC_AEU_PORT0_START    2096
+#define MISC_AEU_COMMON_END     2059
+#define MISC_AEU_PORT0_START    2059
         {OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xbf5c0000},
         {OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xff5c0000},
         {OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0, 0xfff51fef},
@@ -2416,8 +2379,8 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_0, 0x0},
         {OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_0, 0x3},
         {OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_0, 0x7},
-#define MISC_AEU_PORT0_END      2128
-#define MISC_AEU_PORT1_START    2128
+#define MISC_AEU_PORT0_END      2091
+#define MISC_AEU_PORT1_START    2091
         {OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xbf5c0000},
         {OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xff5c0000},
         {OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0, 0xfff51fef},
@@ -2450,7 +2413,7 @@ static const struct raw_op init_ops[] = {
         {OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_1, 0x0},
         {OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_1, 0x3},
         {OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_1, 0x7},
-#define MISC_AEU_PORT1_END      2160
+#define MISC_AEU_PORT1_END      2123
 
 };
 
@@ -2560,103 +2523,92 @@ static const u32 init_data_e1[] = {
         0x00049c00, 0x00051f80, 0x0005a300, 0x00062680, 0x0006aa00, 0x00072d80,
         0x0007b100, 0x00083480, 0x0008b800, 0x00093b80, 0x0009bf00, 0x000a4280,
         0x000ac600, 0x000b4980, 0x000bcd00, 0x000c5080, 0x000cd400, 0x000d5780,
-        0x000ddb00, 0x00001900, 0x00000028, 0x00000000, 0x00100000, 0x00000000,
-        0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
+        0x000ddb00, 0x00001900, 0x00100000, 0x00000000, 0x00000000, 0xffffffff,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-        0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
-        0x00000000, 0x00001500, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-        0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
+        0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000, 0x00001500,
+        0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+        0xffffffff, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-        0x00000000, 0x00007ff8, 0x00000000, 0x00003500, 0x00001000, 0x00002080,
-        0x00003100, 0x00004180, 0x00005200, 0x00006280, 0x00007300, 0x00008380,
-        0x00009400, 0x0000a480, 0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680,
-        0x0000f700, 0x00010780, 0x00011800, 0x00012880, 0x00013900, 0x00014980,
-        0x00015a00, 0x00016a80, 0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80,
-        0x0001bd00, 0x0001cd80, 0x0001de00, 0x0001ee80, 0x0001ff00, 0x00000000,
-        0x00010001, 0x00000604, 0xccccccc1, 0xffffffff, 0xffffffff, 0xcccc0201,
-        0xcccccccc, 0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000,
+        0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
+        0x00000000, 0x00003500, 0x00001000, 0x00002080, 0x00003100, 0x00004180,
+        0x00005200, 0x00006280, 0x00007300, 0x00008380, 0x00009400, 0x0000a480,
+        0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680, 0x0000f700, 0x00010780,
+        0x00011800, 0x00012880, 0x00013900, 0x00014980, 0x00015a00, 0x00016a80,
+        0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80, 0x0001bd00, 0x0001cd80,
+        0x0001de00, 0x0001ee80, 0x0001ff00, 0x00000000, 0x00010001, 0x00000604,
+        0xccccccc1, 0xffffffff, 0xffffffff, 0xcccc0201, 0xcccccccc, 0x00000000,
+        0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
         0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-        0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000,
-        0x00007ff8, 0x00000000, 0x00003500, 0x0000ffff, 0x00000000, 0x0000ffff,
+        0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000,
+        0x00003500, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
         0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
+        0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x00100000,
         0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-        0x00000000, 0x00100000, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
         0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-        0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-        0x00000000, 0x00100000, 0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c,
-        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
-        0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
-        0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-        0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
-        0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
-        0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-        0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-        0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c,
-        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
-        0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-        0xcdcdcdcd, 0xfffffff3, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-        0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
+        0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x00100000,
+        0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+        0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x30efffff, 0x0c30c30c,
         0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
         0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
         0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
         0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
         0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
         0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-        0xcdcdcdcd, 0xfffffff7, 0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-        0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c,
+        0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+        0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x302fffff, 0x0c30c30c,
         0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
-        0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
+        0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
         0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
         0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
         0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
         0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
         0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
         0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
-        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
-        0x056fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
-        0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-        0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c,
+        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7,
+        0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c,
+        0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+        0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x31efffff, 0x0c30c30c,
         0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
         0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
         0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
         0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
         0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
         0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-        0xcdcdcdcd, 0xffffff8a, 0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-        0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c,
+        0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+        0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x056fffff, 0x0c30c30c,
         0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
         0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-        0xcdcdcdcd, 0xfffffff3, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-        0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x300fffff, 0x0c30c30c,
+        0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+        0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
         0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
         0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
         0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
         0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
-        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
-        0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-        0xcdcdcdcd, 0xffffff97, 0x040fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-        0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x300fffff, 0x0c30c30c,
-        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
-        0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
-        0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-        0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-        0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
-        0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
-        0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-        0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-        0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
-        0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
-        0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffff8a,
+        0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0010cf3c,
+        0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
+        0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c,
+        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
+        0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
+        0xcdcdcdcd, 0xfffffff1, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+        0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
+        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
+        0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
+        0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+        0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
+        0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
+        0x040fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
+        0xcdcdcdcd, 0xfffffff5, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
         0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
         0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff,
         0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c,
@@ -2678,16 +2630,27 @@ static const u32 init_data_e1[] = {
         0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c,
         0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
         0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-        0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000,
-        0x00070100, 0x00028170, 0x000b8198, 0x00020250, 0x00010270, 0x000f0280,
-        0x00010370, 0x00080000, 0x00080080, 0x00028100, 0x000b8128, 0x000201e0,
-        0x00010200, 0x00070210, 0x00020280, 0x000f0000, 0x000800f0, 0x00028170,
-        0x000b8198, 0x00020250, 0x00010270, 0x000b8280, 0x00080338, 0x00100000,
-        0x00080100, 0x00028180, 0x000b81a8, 0x00020260, 0x00018280, 0x000e8298,
-        0x00080380, 0x00028000, 0x000b8028, 0x000200e0, 0x00010100, 0x00008110,
-        0x00000118, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000,
-        0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc,
-        0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000
+        0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
+        0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
+        0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+        0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
+        0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
+        0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
+        0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+        0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
+        0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
+        0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
+        0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+        0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000, 0x00070100, 0x00028170,
+        0x000b8198, 0x00020250, 0x00010270, 0x000f0280, 0x00010370, 0x00080000,
+        0x00080080, 0x00028100, 0x000b8128, 0x000201e0, 0x00010200, 0x00070210,
+        0x00020280, 0x000f0000, 0x000800f0, 0x00028170, 0x000b8198, 0x00020250,
+        0x00010270, 0x000b8280, 0x00080338, 0x00100000, 0x00080100, 0x00028180,
+        0x000b81a8, 0x00020260, 0x00018280, 0x000e8298, 0x00080380, 0x00028000,
+        0x000b8028, 0x000200e0, 0x00010100, 0x00008110, 0x00000118, 0xcccccccc,
+        0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc,
+        0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc,
+        0xcccccccc, 0x00002000
 };
 
 static const u32 init_data_e1h[] = {
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index ff2743db10d9..8b92c6ad0759 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -31,17 +31,16 @@
 
 /********************************************************/
 #define SUPPORT_CL73 0 /* Currently no */
-#define ETH_HLEN                        14
+#define ETH_HLEN                        14
 #define ETH_OVREHEAD            (ETH_HLEN + 8)/* 8 for CRC + VLAN*/
 #define ETH_MIN_PACKET_SIZE             60
 #define ETH_MAX_PACKET_SIZE             1500
 #define ETH_MAX_JUMBO_PACKET_SIZE       9600
 #define MDIO_ACCESS_TIMEOUT             1000
 #define BMAC_CONTROL_RX_ENABLE  2
-#define MAX_MTU_SIZE            5000
 
 /***********************************************************/
-/*                       Shortcut definitions              */
+/*                      Shortcut definitions               */
 /***********************************************************/
 
 #define NIG_STATUS_XGXS0_LINK10G \
@@ -80,12 +79,12 @@
 
 #define AUTONEG_CL37            SHARED_HW_CFG_AN_ENABLE_CL37
 #define AUTONEG_CL73            SHARED_HW_CFG_AN_ENABLE_CL73
-#define AUTONEG_BAM                     SHARED_HW_CFG_AN_ENABLE_BAM
-#define AUTONEG_PARALLEL                \
+#define AUTONEG_BAM             SHARED_HW_CFG_AN_ENABLE_BAM
+#define AUTONEG_PARALLEL \
                                 SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
-#define AUTONEG_SGMII_FIBER_AUTODET     \
+#define AUTONEG_SGMII_FIBER_AUTODET \
                                 SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
-#define AUTONEG_REMOTE_PHY              SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
+#define AUTONEG_REMOTE_PHY      SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
 
 #define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
                         MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
@@ -202,11 +201,10 @@ static void bnx2x_emac_init(struct link_params *params,
         /* init emac - use read-modify-write */
         /* self clear reset */
         val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
-        EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
+        EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
 
         timeout = 200;
-        do
-        {
+        do {
                 val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
                 DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
                 if (!timeout) {
@@ -214,18 +212,18 @@ static void bnx2x_emac_init(struct link_params *params,
                         return;
                 }
                 timeout--;
-        }while (val & EMAC_MODE_RESET);
+        } while (val & EMAC_MODE_RESET);
 
         /* Set mac address */
         val = ((params->mac_addr[0] << 8) |
                 params->mac_addr[1]);
-        EMAC_WR(EMAC_REG_EMAC_MAC_MATCH, val);
+        EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val);
 
         val = ((params->mac_addr[2] << 24) |
                (params->mac_addr[3] << 16) |
                (params->mac_addr[4] << 8) |
                 params->mac_addr[5]);
-        EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val);
+        EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val);
 }
 
 static u8 bnx2x_emac_enable(struct link_params *params,
@@ -286,7 +284,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
         if (CHIP_REV_IS_SLOW(bp)) {
                 /* config GMII mode */
                 val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
-                EMAC_WR(EMAC_REG_EMAC_MODE,
+                EMAC_WR(bp, EMAC_REG_EMAC_MODE,
                             (val | EMAC_MODE_PORT_GMII));
         } else { /* ASIC */
                 /* pause enable/disable */
@@ -298,17 +296,19 @@ static u8 bnx2x_emac_enable(struct link_params *params,
                                     EMAC_RX_MODE_FLOW_EN);
 
                 bnx2x_bits_dis(bp,  emac_base + EMAC_REG_EMAC_TX_MODE,
-                               EMAC_TX_MODE_EXT_PAUSE_EN);
+                             (EMAC_TX_MODE_EXT_PAUSE_EN |
+                              EMAC_TX_MODE_FLOW_EN));
                 if (vars->flow_ctrl & FLOW_CTRL_TX)
                         bnx2x_bits_en(bp, emac_base +
                                     EMAC_REG_EMAC_TX_MODE,
-                                      EMAC_TX_MODE_EXT_PAUSE_EN);
+                                   (EMAC_TX_MODE_EXT_PAUSE_EN |
+                                    EMAC_TX_MODE_FLOW_EN));
         }
 
         /* KEEP_VLAN_TAG, promiscuous */
         val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
         val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
-        EMAC_WR(EMAC_REG_EMAC_RX_MODE, val);
+        EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val);
 
         /* Set Loopback */
         val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
@@ -316,10 +316,10 @@ static u8 bnx2x_emac_enable(struct link_params *params,
                 val |= 0x810;
         else
                 val &= ~0x810;
-        EMAC_WR(EMAC_REG_EMAC_MODE, val);
+        EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
 
         /* enable emac for jumbo packets */
-        EMAC_WR(EMAC_REG_EMAC_RX_MTU_SIZE,
+        EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
                 (EMAC_RX_MTU_SIZE_JUMBO_ENA |
                  (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)));
 
@@ -591,9 +591,9 @@ void bnx2x_link_status_update(struct link_params *params,
                         vars->flow_ctrl &= ~FLOW_CTRL_RX;
 
                 if (vars->phy_flags & PHY_XGXS_FLAG) {
-                        if (params->req_line_speed &&
-                            ((params->req_line_speed == SPEED_10) ||
-                             (params->req_line_speed == SPEED_100))) {
+                        if (vars->line_speed &&
+                            ((vars->line_speed == SPEED_10) ||
+                             (vars->line_speed == SPEED_100))) {
                                 vars->phy_flags |= PHY_SGMII_FLAG;
                         } else {
                                 vars->phy_flags &= ~PHY_SGMII_FLAG;
@@ -645,7 +645,7 @@ static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port)
         u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
                 NIG_REG_INGRESS_BMAC0_MEM;
         u32 wb_data[2];
-    u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
+        u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
 
         /* Only if the bmac is out of reset */
         if (REG_RD(bp, MISC_REG_RESET_REG_2) &
@@ -670,7 +670,6 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
         u8 port = params->port;
         u32 init_crd, crd;
         u32 count = 1000;
-        u32 pause = 0;
 
         /* disable port */
         REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
@@ -693,33 +692,25 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
                 return -EINVAL;
         }
 
-        if (flow_ctrl & FLOW_CTRL_RX)
-                pause = 1;
-        REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, pause);
-        if (pause) {
+        if (flow_ctrl & FLOW_CTRL_RX ||
+            line_speed == SPEED_10 ||
+            line_speed == SPEED_100 ||
+            line_speed == SPEED_1000 ||
+            line_speed == SPEED_2500) {
+                REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1);
                 /* update threshold */
                 REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
                 /* update init credit */
-                init_crd = 778;         /* (800-18-4) */
+                init_crd = 778;         /* (800-18-4) */
 
         } else {
                 u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE +
                               ETH_OVREHEAD)/16;
-
+                REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
                 /* update threshold */
                 REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
                 /* update init credit */
                 switch (line_speed) {
-                case SPEED_10:
-                case SPEED_100:
-                case SPEED_1000:
-                        init_crd = thresh + 55 - 22;
-                        break;
-
-                case SPEED_2500:
-                        init_crd = thresh + 138 - 22;
-                        break;
-
                 case SPEED_10000:
                         init_crd = thresh + 553 - 22;
                         break;
@@ -764,10 +755,10 @@ static u32 bnx2x_get_emac_base(u32 ext_phy_type, u8 port)
                 emac_base = GRCBASE_EMAC0;
                 break;
         case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
-                emac_base = (port) ? GRCBASE_EMAC0: GRCBASE_EMAC1;
+                emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
                 break;
         default:
-                emac_base = (port) ? GRCBASE_EMAC1: GRCBASE_EMAC0;
+                emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
                 break;
         }
         return emac_base;
@@ -1044,7 +1035,7 @@ static void bnx2x_set_swap_lanes(struct link_params *params)
 }
 
 static void bnx2x_set_parallel_detection(struct link_params *params,
-                                       u8                phy_flags)
+                                       u8                phy_flags)
 {
         struct bnx2x *bp = params->bp;
         u16 control2;
@@ -1114,7 +1105,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
                               MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
 
         /* CL37 Autoneg Enabled */
-        if (params->req_line_speed == SPEED_AUTO_NEG)
+        if (vars->line_speed == SPEED_AUTO_NEG)
                 reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
         else /* CL37 Autoneg Disabled */
                 reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
@@ -1132,7 +1123,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
                               MDIO_REG_BANK_SERDES_DIGITAL,
                               MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
         reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN;
-        if (params->req_line_speed == SPEED_AUTO_NEG)
+        if (vars->line_speed == SPEED_AUTO_NEG)
                 reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
         else
                 reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
@@ -1148,7 +1139,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
                               MDIO_REG_BANK_BAM_NEXT_PAGE,
                               MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
                           &reg_val);
-        if (params->req_line_speed == SPEED_AUTO_NEG) {
+        if (vars->line_speed == SPEED_AUTO_NEG) {
                 /* Enable BAM aneg Mode and TetonII aneg Mode */
                 reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
                             MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
@@ -1164,7 +1155,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
                               reg_val);
 
         /* Enable Clause 73 Aneg */
-        if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+        if ((vars->line_speed == SPEED_AUTO_NEG) &&
             (SUPPORT_CL73)) {
                 /* Enable BAM Station Manager */
 
@@ -1226,7 +1217,8 @@ static void bnx2x_set_autoneg(struct link_params *params,
 }
 
 /* program SerDes, forced speed */
-static void bnx2x_program_serdes(struct link_params *params)
+static void bnx2x_program_serdes(struct link_params *params,
+                               struct link_vars *vars)
 {
         struct bnx2x *bp = params->bp;
         u16 reg_val;
@@ -1248,28 +1240,35 @@ static void bnx2x_program_serdes(struct link_params *params)
 
         /* program speed
            - needed only if the speed is greater than 1G (2.5G or 10G) */
-        if (!((params->req_line_speed == SPEED_1000) ||
-              (params->req_line_speed == SPEED_100) ||
-              (params->req_line_speed == SPEED_10))) {
-                CL45_RD_OVER_CL22(bp, params->port,
+        CL45_RD_OVER_CL22(bp, params->port,
                                       params->phy_addr,
                                       MDIO_REG_BANK_SERDES_DIGITAL,
                                       MDIO_SERDES_DIGITAL_MISC1, &reg_val);
-                /* clearing the speed value before setting the right speed */
-                reg_val &= ~MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK;
+        /* clearing the speed value before setting the right speed */
+        DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val);
+
+        reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
+                     MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
+
+        if (!((vars->line_speed == SPEED_1000) ||
+              (vars->line_speed == SPEED_100) ||
+              (vars->line_speed == SPEED_10))) {
+
                 reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
                             MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
-                if (params->req_line_speed == SPEED_10000)
+                if (vars->line_speed == SPEED_10000)
                         reg_val |=
                                 MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
-                if (params->req_line_speed == SPEED_13000)
+                if (vars->line_speed == SPEED_13000)
                         reg_val |=
                                 MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G;
-                CL45_WR_OVER_CL22(bp, params->port,
+        }
+
+        CL45_WR_OVER_CL22(bp, params->port,
                                       params->phy_addr,
                                       MDIO_REG_BANK_SERDES_DIGITAL,
                                       MDIO_SERDES_DIGITAL_MISC1, reg_val);
-        }
+
 }
 
 static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
@@ -1295,48 +1294,49 @@ static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
                               MDIO_OVER_1G_UP3, 0);
 }
 
-static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
-                                           u32 *ieee_fc)
+static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
 {
-        struct bnx2x *bp = params->bp;
-        /* for AN, we are always publishing full duplex */
-        u16 an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
-
+        *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
         /* resolve pause mode and advertisement
          * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
 
         switch (params->req_flow_ctrl) {
         case FLOW_CTRL_AUTO:
-                if (params->mtu <= MAX_MTU_SIZE) {
-                        an_adv |=
+                if (params->req_fc_auto_adv == FLOW_CTRL_BOTH) {
+                        *ieee_fc |=
                              MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
                 } else {
-                        an_adv |=
+                        *ieee_fc |=
                        MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
                 }
                 break;
         case FLOW_CTRL_TX:
-                an_adv |=
+                *ieee_fc |=
                        MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
                 break;
 
         case FLOW_CTRL_RX:
         case FLOW_CTRL_BOTH:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+                *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
                 break;
 
         case FLOW_CTRL_NONE:
         default:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+                *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
                 break;
         }
+}
 
-        *ieee_fc = an_adv;
+static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
+                                           u32 ieee_fc)
+{
+        struct bnx2x *bp = params->bp;
+        /* for AN, we are always publishing full duplex */
 
         CL45_WR_OVER_CL22(bp, params->port,
                               params->phy_addr,
                               MDIO_REG_BANK_COMBO_IEEE0,
-                              MDIO_COMBO_IEEE0_AUTO_NEG_ADV, an_adv);
+                              MDIO_COMBO_IEEE0_AUTO_NEG_ADV, (u16)ieee_fc);
 }
 
 static void bnx2x_restart_autoneg(struct link_params *params)
@@ -1382,7 +1382,8 @@ static void bnx2x_restart_autoneg(struct link_params *params)
         }
 }
 
-static void bnx2x_initialize_sgmii_process(struct link_params *params)
+static void bnx2x_initialize_sgmii_process(struct link_params *params,
+                                         struct link_vars *vars)
 {
         struct bnx2x *bp = params->bp;
         u16 control1;
@@ -1406,7 +1407,7 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
                               control1);
 
         /* if forced speed */
-        if (!(params->req_line_speed == SPEED_AUTO_NEG)) {
+        if (!(vars->line_speed == SPEED_AUTO_NEG)) {
                 /* set speed, disable autoneg */
                 u16 mii_control;
 
@@ -1419,7 +1420,7 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
                                  MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK|
                                  MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
 
-                switch (params->req_line_speed) {
+                switch (vars->line_speed) {
                 case SPEED_100:
                         mii_control |=
                                 MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
@@ -1433,8 +1434,8 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
                         break;
                 default:
                         /* invalid speed for SGMII */
-                        DP(NETIF_MSG_LINK, "Invalid req_line_speed 0x%x\n",
-                                  params->req_line_speed);
+                        DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
+                                  vars->line_speed);
                         break;
                 }
 
@@ -1460,20 +1461,20 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
  */
 
 static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
-{
-        switch (pause_result) {                 /* ASYM P ASYM P */
-        case 0xb:                               /*   1  0   1  1 */
+{                                               /*  LD      LP   */
+        switch (pause_result) {                 /* ASYM P ASYM P */
+        case 0xb:                               /*   1  0   1  1 */
                 vars->flow_ctrl = FLOW_CTRL_TX;
                 break;
 
-        case 0xe:                               /*   1  1   1  0 */
+        case 0xe:                               /*   1  1   1  0 */
                 vars->flow_ctrl = FLOW_CTRL_RX;
                 break;
 
-        case 0x5:                               /*   0  1   0  1 */
-        case 0x7:                               /*   0  1   1  1 */
-        case 0xd:                               /*   1  1   0  1 */
-        case 0xf:                               /*   1  1   1  1 */
+        case 0x5:                               /*   0  1   0  1 */
+        case 0x7:                               /*   0  1   1  1 */
+        case 0xd:                               /*   1  1   0  1 */
+        case 0xf:                               /*   1  1   1  1 */
                 vars->flow_ctrl = FLOW_CTRL_BOTH;
                 break;
 
@@ -1531,6 +1532,28 @@ static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
                 DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
                    pause_result);
                 bnx2x_pause_resolve(vars, pause_result);
+                if (vars->flow_ctrl == FLOW_CTRL_NONE &&
+                     ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+                        bnx2x_cl45_read(bp, port,
+                                      ext_phy_type,
+                                      ext_phy_addr,
+                                      MDIO_AN_DEVAD,
+                                      MDIO_AN_REG_CL37_FC_LD, &ld_pause);
+
+                        bnx2x_cl45_read(bp, port,
+                                      ext_phy_type,
+                                      ext_phy_addr,
+                                      MDIO_AN_DEVAD,
+                                      MDIO_AN_REG_CL37_FC_LP, &lp_pause);
+                        pause_result = (ld_pause &
+                                MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5;
+                        pause_result |= (lp_pause &
+                                MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
+
+                        bnx2x_pause_resolve(vars, pause_result);
+                        DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x \n",
+                                 pause_result);
+                }
         }
         return ret;
 }
@@ -1541,8 +1564,8 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
                                   u32 gp_status)
 {
         struct bnx2x *bp = params->bp;
-        u16 ld_pause;   /* local driver */
-        u16 lp_pause;   /* link partner */
+        u16 ld_pause;   /* local driver */
+        u16 lp_pause;   /* link partner */
         u16 pause_result;
 
         vars->flow_ctrl = FLOW_CTRL_NONE;
@@ -1573,13 +1596,10 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
                    (bnx2x_ext_phy_resove_fc(params, vars))) {
                 return;
         } else {
-                vars->flow_ctrl = params->req_flow_ctrl;
-                if (vars->flow_ctrl == FLOW_CTRL_AUTO) {
-                        if (params->mtu <= MAX_MTU_SIZE)
-                                vars->flow_ctrl = FLOW_CTRL_BOTH;
-                        else
-                                vars->flow_ctrl = FLOW_CTRL_TX;
-                }
+                if (params->req_flow_ctrl == FLOW_CTRL_AUTO)
+                        vars->flow_ctrl = params->req_fc_auto_adv;
+                else
+                        vars->flow_ctrl = params->req_flow_ctrl;
         }
         DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl);
 }
@@ -1590,6 +1610,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
                                       u32 gp_status)
 {
         struct bnx2x *bp = params->bp;
+
         u8 rc = 0;
         vars->link_status = 0;
 
@@ -1690,7 +1711,11 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
                 vars->link_status |= LINK_STATUS_SERDES_LINK;
 
-                if (params->req_line_speed == SPEED_AUTO_NEG) {
+                if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+                    ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+                     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+                    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+                     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705))) {
                         vars->autoneg = AUTO_NEG_ENABLED;
 
                         if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
@@ -1705,18 +1730,18 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
                 }
                 if (vars->flow_ctrl & FLOW_CTRL_TX)
-                       vars->link_status |=
-                        LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
+                        vars->link_status |=
+                                LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
 
                 if (vars->flow_ctrl & FLOW_CTRL_RX)
-                       vars->link_status |=
-                        LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
+                        vars->link_status |=
+                                LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
 
         } else { /* link_down */
                 DP(NETIF_MSG_LINK, "phy link down\n");
 
                 vars->phy_link_up = 0;
-                vars->line_speed = 0;
+
                 vars->duplex = DUPLEX_FULL;
                 vars->flow_ctrl = FLOW_CTRL_NONE;
                 vars->autoneg = AUTO_NEG_DISABLED;
@@ -1817,15 +1842,15 @@ static u8 bnx2x_emac_program(struct link_params *params,
 }
 
 /*****************************************************************************/
-/*                           External Phy section                            */
+/*                           External Phy section                            */
 /*****************************************************************************/
-static void bnx2x_hw_reset(struct bnx2x *bp)
+static void bnx2x_hw_reset(struct bnx2x *bp, u8 port)
 {
         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-                       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
         msleep(1);
         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-                      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+                      MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
 }
 
 static void bnx2x_ext_phy_reset(struct link_params *params,
@@ -1854,10 +1879,11 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
                         /* Restore normal power mode*/
                         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+                                          params->port);
 
                         /* HW reset */
-                        bnx2x_hw_reset(bp);
+                        bnx2x_hw_reset(bp, params->port);
 
                         bnx2x_cl45_write(bp, params->port,
                                        ext_phy_type,
@@ -1869,7 +1895,8 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
                         /* Unset Low Power Mode and SW reset */
                         /* Restore normal power mode*/
                         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+                                          params->port);
 
                         DP(NETIF_MSG_LINK, "XGXS 8072\n");
                         bnx2x_cl45_write(bp, params->port,
@@ -1887,19 +1914,14 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
                         /* Restore normal power mode*/
                         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+                                          params->port);
 
                         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+                                          params->port);
 
                         DP(NETIF_MSG_LINK, "XGXS 8073\n");
-                        bnx2x_cl45_write(bp,
-                                       params->port,
-                                       ext_phy_type,
-                                       ext_phy_addr,
-                                       MDIO_PMA_DEVAD,
-                                       MDIO_PMA_REG_CTRL,
-                                       1<<15);
                         }
                         break;
 
@@ -1908,10 +1930,11 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
                         /* Restore normal power mode*/
                         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+                                      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+                                          params->port);
 
                         /* HW reset */
-                        bnx2x_hw_reset(bp);
+                        bnx2x_hw_reset(bp, params->port);
 
                         break;
 
@@ -1934,7 +1957,7 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
                 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
                         DP(NETIF_MSG_LINK, "SerDes 5482\n");
-                        bnx2x_hw_reset(bp);
+                        bnx2x_hw_reset(bp, params->port);
                         break;
 
                 default:
@@ -2098,42 +2121,45 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
 
 }
 
-static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
+static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
+                                          u8 ext_phy_addr)
 {
-        struct bnx2x *bp = params->bp;
-        u8 port = params->port;
-        u8 ext_phy_addr = ((params->ext_phy_config &
-                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-        u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
-        u16 fw_ver1, fw_ver2, val;
-        /* Need to wait 100ms after reset */
-        msleep(100);
-        /* Boot port from external ROM  */
+        u16 fw_ver1, fw_ver2;
+        /* Boot port from external ROM  */
         /* EDC grst */
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+        bnx2x_cl45_write(bp, port,
+                       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                       ext_phy_addr,
                        MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_GEN_CTRL,
                        0x0001);
 
         /* ucode reboot and rst */
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+        bnx2x_cl45_write(bp, port,
+                       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                       ext_phy_addr,
                        MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_GEN_CTRL,
                        0x008c);
 
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+        bnx2x_cl45_write(bp, port,
+                       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                       ext_phy_addr,
                        MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_MISC_CTRL1, 0x0001);
 
         /* Reset internal microprocessor */
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+        bnx2x_cl45_write(bp, port,
+                       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                       ext_phy_addr,
                        MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_GEN_CTRL,
                        MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
 
         /* Release srst bit */
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+        bnx2x_cl45_write(bp, port,
+                       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                       ext_phy_addr,
                        MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_GEN_CTRL,
                        MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
@@ -2142,35 +2168,52 @@ static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
         msleep(100);
 
         /* Clear ser_boot_ctl bit */
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+        bnx2x_cl45_write(bp, port,
+                       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                       ext_phy_addr,
                        MDIO_PMA_DEVAD,
                        MDIO_PMA_REG_MISC_CTRL1, 0x0000);
 
-        bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-                       MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_ROM_VER1, &fw_ver1);
-        bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-                       MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_ROM_VER2, &fw_ver2);
+        bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                      ext_phy_addr,
+                      MDIO_PMA_DEVAD,
+                      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+        bnx2x_cl45_read(bp, port,
+                      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                      ext_phy_addr,
+                      MDIO_PMA_DEVAD,
+                      MDIO_PMA_REG_ROM_VER2, &fw_ver2);
         DP(NETIF_MSG_LINK, "8073 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
 
-        /* Only set bit 10 = 1 (Tx power down) */
-        bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-                       MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_TX_POWER_DOWN, &val);
+}
 
+static void bnx2x_bcm807x_force_10G(struct link_params *params)
+{
+        struct bnx2x *bp = params->bp;
+        u8 port = params->port;
+        u8 ext_phy_addr = ((params->ext_phy_config &
+                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                                PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+        /* Force KR or KX */
         bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
                        MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_TX_POWER_DOWN, (val | 1<<10));
-
-        msleep(600);
-        /* Release bit 10 (Release Tx power down) */
+                       MDIO_PMA_REG_CTRL,
+                       0x2040);
         bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
                        MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
-
+                       MDIO_PMA_REG_10G_CTRL2,
+                       0x000b);
+        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+                       MDIO_PMA_DEVAD,
+                       MDIO_PMA_REG_BCM_CTRL,
+                       0x0000);
+        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+                       MDIO_AN_DEVAD,
+                       MDIO_AN_REG_CTRL,
+                       0x0000);
 }
-
 static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
 {
         struct bnx2x *bp = params->bp;
@@ -2236,32 +2279,51 @@ static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
         bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
                        MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
 }
-static void bnx2x_bcm807x_force_10G(struct link_params *params)
+
+static void bnx2x_8073_set_pause_cl37(struct link_params *params,
+                                  struct link_vars *vars)
 {
+
         struct bnx2x *bp = params->bp;
-        u8 port = params->port;
+        u16 cl37_val;
         u8 ext_phy_addr = ((params->ext_phy_config &
                                 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
                                 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
-        /* Force KR or KX */
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-                       MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_CTRL,
-                       0x2040);
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-                       MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_10G_CTRL2,
-                       0x000b);
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-                       MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_BCM_CTRL,
-                       0x0000);
-        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+        bnx2x_cl45_read(bp, params->port,
+                      ext_phy_type,
+                      ext_phy_addr,
+                      MDIO_AN_DEVAD,
+                      MDIO_AN_REG_CL37_FC_LD, &cl37_val);
+
+        cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+        /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+
+        if ((vars->ieee_fc &
+            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
+            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
+                cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
+        }
+        if ((vars->ieee_fc &
+            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
+                cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+        }
+        if ((vars->ieee_fc &
+            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
+                cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+        }
+        DP(NETIF_MSG_LINK,
+                 "Ext phy AN advertize cl37 0x%x\n", cl37_val);
+
+        bnx2x_cl45_write(bp, params->port,
+                       ext_phy_type,
+                       ext_phy_addr,
                        MDIO_AN_DEVAD,
-                       MDIO_AN_REG_CTRL,
-                       0x0000);
+                       MDIO_AN_REG_CL37_FC_LD, cl37_val);
+        msleep(500);
 }
 
 static void bnx2x_ext_phy_set_pause(struct link_params *params,
@@ -2282,13 +2344,16 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
                       MDIO_AN_REG_ADV_PAUSE, &val);
 
         val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
+
         /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
 
-        if (vars->ieee_fc &
+        if ((vars->ieee_fc &
+            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
             MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
                 val |=  MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
         }
-        if (vars->ieee_fc &
+        if ((vars->ieee_fc &
+            MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
             MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
                 val |=
                  MDIO_AN_REG_ADV_PAUSE_PAUSE;
@@ -2302,6 +2367,65 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
                        MDIO_AN_REG_ADV_PAUSE, val);
 }
 
+
+static void bnx2x_init_internal_phy(struct link_params *params,
+                                struct link_vars *vars)
+{
+        struct bnx2x *bp = params->bp;
+        u8 port = params->port;
+        if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
+                u16 bank, rx_eq;
+
+                rx_eq = ((params->serdes_config &
+                          PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
+                         PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
+
+                DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
+                for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
+                      bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
+                        CL45_WR_OVER_CL22(bp, port,
+                                              params->phy_addr,
+                                              bank ,
+                                              MDIO_RX0_RX_EQ_BOOST,
+                                              ((rx_eq &
+                                MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
+                                MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
+                }
+
+                /* forced speed requested? */
+                if (vars->line_speed != SPEED_AUTO_NEG) {
+                        DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
+
+                        /* disable autoneg */
+                        bnx2x_set_autoneg(params, vars);
+
+                        /* program speed and duplex */
+                        bnx2x_program_serdes(params, vars);
+
+                } else { /* AN_mode */
+                        DP(NETIF_MSG_LINK, "not SGMII, AN\n");
+
+                        /* AN enabled */
+                        bnx2x_set_brcm_cl37_advertisment(params);
+
+                        /* program duplex & pause advertisement (for aneg) */
+                        bnx2x_set_ieee_aneg_advertisment(params,
+                                                       vars->ieee_fc);
+
+                        /* enable autoneg */
+                        bnx2x_set_autoneg(params, vars);
+
+                        /* enable and restart AN */
+                        bnx2x_restart_autoneg(params);
+                }
+
+        } else { /* SGMII mode */
+                DP(NETIF_MSG_LINK, "SGMII\n");
+
+                bnx2x_initialize_sgmii_process(params, vars);
+        }
+}
+
 static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 {
         struct bnx2x *bp = params->bp;
@@ -2343,7 +2467,6 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
-                        DP(NETIF_MSG_LINK, "XGXS Direct\n");
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
@@ -2419,7 +2542,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
                                                ext_phy_type,
                                                ext_phy_addr,
                                                MDIO_AN_DEVAD,
-                                               MDIO_AN_REG_CL37_FD,
+                                               MDIO_AN_REG_CL37_FC_LP,
                                                0x0020);
                                 /* Enable CL37 AN */
                                 bnx2x_cl45_write(bp, params->port,
@@ -2458,54 +2581,43 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
                                 rx_alarm_ctrl_val = 0x400;
                                 lasi_ctrl_val = 0x0004;
                         } else {
-                                /* In 8073, port1 is directed through emac0 and
-                                 * port0 is directed through emac1
-                                 */
                                 rx_alarm_ctrl_val = (1<<2);
-                                /*lasi_ctrl_val = 0x0005;*/
                                 lasi_ctrl_val = 0x0004;
                         }
 
-                        /* Wait for soft reset to get cleared upto 1 sec */
-                        for (cnt = 0; cnt < 1000; cnt++) {
-                                bnx2x_cl45_read(bp, params->port,
-                                              ext_phy_type,
-                                              ext_phy_addr,
-                                              MDIO_PMA_DEVAD,
-                                              MDIO_PMA_REG_CTRL,
-                                              &ctrl);
-                                if (!(ctrl & (1<<15)))
-                                        break;
-                                msleep(1);
-                        }
-                        DP(NETIF_MSG_LINK,
-                                "807x control reg 0x%x (after %d ms)\n",
-                                ctrl, cnt);
+                        /* enable LASI */
+                        bnx2x_cl45_write(bp, params->port,
+                                   ext_phy_type,
+                                   ext_phy_addr,
+                                   MDIO_PMA_DEVAD,
+                                   MDIO_PMA_REG_RX_ALARM_CTRL,
+                                   rx_alarm_ctrl_val);
+
+                        bnx2x_cl45_write(bp, params->port,
+                                       ext_phy_type,
+                                       ext_phy_addr,
+                                       MDIO_PMA_DEVAD,
+                                       MDIO_PMA_REG_LASI_CTRL,
+                                       lasi_ctrl_val);
+
+                        bnx2x_8073_set_pause_cl37(params, vars);
 
                         if (ext_phy_type ==
                             PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){
                                 bnx2x_bcm8072_external_rom_boot(params);
                         } else {
-                                bnx2x_bcm8073_external_rom_boot(params);
+
                                 /* In case of 8073 with long xaui lines,
                                 don't set the 8073 xaui low power*/
                                 bnx2x_bcm8073_set_xaui_low_power_mode(params);
                         }
 
-                        /* enable LASI */
-                        bnx2x_cl45_write(bp, params->port,
-                                       ext_phy_type,
-                                       ext_phy_addr,
-                                       MDIO_PMA_DEVAD,
-                                       MDIO_PMA_REG_RX_ALARM_CTRL,
-                                       rx_alarm_ctrl_val);
-
-                        bnx2x_cl45_write(bp, params->port,
-                                       ext_phy_type,
-                                       ext_phy_addr,
-                                       MDIO_PMA_DEVAD,
-                                       MDIO_PMA_REG_LASI_CTRL,
-                                       lasi_ctrl_val);
+                        bnx2x_cl45_read(bp, params->port,
+                                      ext_phy_type,
+                                      ext_phy_addr,
+                                      MDIO_PMA_DEVAD,
+                                      0xca13,
+                                      &tmp1);
 
                         bnx2x_cl45_read(bp, params->port,
                                       ext_phy_type,
@@ -2519,12 +2631,21 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
                         /* If this is forced speed, set to KR or KX
                          * (all other are not supported)
                          */
-                        if (!(params->req_line_speed == SPEED_AUTO_NEG)) {
-                        if (params->req_line_speed == SPEED_10000) {
-                                        bnx2x_bcm807x_force_10G(params);
-                                        DP(NETIF_MSG_LINK,
-                                           "Forced speed 10G on 807X\n");
-                                        break;
+                        if (params->loopback_mode == LOOPBACK_EXT) {
+                                bnx2x_bcm807x_force_10G(params);
+                                DP(NETIF_MSG_LINK,
+                                        "Forced speed 10G on 807X\n");
+                                break;
+                        } else {
+                                bnx2x_cl45_write(bp, params->port,
+                                               ext_phy_type, ext_phy_addr,
+                                               MDIO_PMA_DEVAD,
+                                               MDIO_PMA_REG_BCM_CTRL,
+                                               0x0002);
+                        }
+                        if (params->req_line_speed != SPEED_AUTO_NEG) {
+                                if (params->req_line_speed == SPEED_10000) {
+                                        val = (1<<7);
                                 } else if (params->req_line_speed ==
                                            SPEED_2500) {
                                         val = (1<<5);
@@ -2539,11 +2660,14 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
                                         PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
                                         val |= (1<<7);
 
+                                /* Note that 2.5G works only when
+                                used with 1G advertisment */
                                 if (params->speed_cap_mask &
-                                        PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+                                        (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+                                         PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
                                         val |= (1<<5);
-                                DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val);
-                                /*val = ((1<<5)|(1<<7));*/
+                                DP(NETIF_MSG_LINK,
+                                         "807x autoneg val = 0x%x\n", val);
                         }
 
                         bnx2x_cl45_write(bp, params->port,
@@ -2554,20 +2678,19 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
                         if (ext_phy_type ==
                             PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-                                /* Disable 2.5Ghz */
+
                                 bnx2x_cl45_read(bp, params->port,
                                               ext_phy_type,
                                               ext_phy_addr,
                                               MDIO_AN_DEVAD,
                                               0x8329, &tmp1);
-/* SUPPORT_SPEED_CAPABILITY
-                                (Due to the nature of the link order, its not
-                                possible to enable 2.5G within the autoneg
-                                capabilities)
-                                if (params->speed_cap_mask &
-                                PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
-*/
-                                if (params->req_line_speed == SPEED_2500) {
+
+                                if (((params->speed_cap_mask &
+                                      PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
+                                     (params->req_line_speed ==
+                                      SPEED_AUTO_NEG)) ||
+                                    (params->req_line_speed ==
+                                     SPEED_2500)) {
                                         u16 phy_ver;
                                         /* Allow 2.5G for A1 and above */
                                         bnx2x_cl45_read(bp, params->port,
@@ -2575,49 +2698,53 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
                                          ext_phy_addr,
                                          MDIO_PMA_DEVAD,
                                          0xc801, &phy_ver);
-
+                                        DP(NETIF_MSG_LINK, "Add 2.5G\n");
                                         if (phy_ver > 0)
                                                 tmp1 |= 1;
                                         else
                                                 tmp1 &= 0xfffe;
-                        }
-                                else
+                                } else {
+                                        DP(NETIF_MSG_LINK, "Disable 2.5G\n");
                                         tmp1 &= 0xfffe;
+                                }
 
-                        bnx2x_cl45_write(bp, params->port,
-                                       ext_phy_type,
-                                       ext_phy_addr,
-                                       MDIO_AN_DEVAD,
+                                bnx2x_cl45_write(bp, params->port,
+                                               ext_phy_type,
+                                               ext_phy_addr,
+                                               MDIO_AN_DEVAD,
                                                0x8329, tmp1);
                         }
-                        /* Add support for CL37 (passive mode) I */
-                        bnx2x_cl45_write(bp, params->port,
+
+                        /* Add support for CL37 (passive mode) II */
+
+                        bnx2x_cl45_read(bp, params->port,
                                        ext_phy_type,
                                        ext_phy_addr,
                                        MDIO_AN_DEVAD,
-                                       MDIO_AN_REG_CL37_CL73, 0x040c);
-                        /* Add support for CL37 (passive mode) II */
+                                       MDIO_AN_REG_CL37_FC_LD,
+                                       &tmp1);
+
                         bnx2x_cl45_write(bp, params->port,
                                        ext_phy_type,
                                        ext_phy_addr,
                                        MDIO_AN_DEVAD,
-                                       MDIO_AN_REG_CL37_FD, 0x20);
+                                       MDIO_AN_REG_CL37_FC_LD, (tmp1 |
+                                       ((params->req_duplex == DUPLEX_FULL) ?
+                                       0x20 : 0x40)));
+
                         /* Add support for CL37 (passive mode) III */
                         bnx2x_cl45_write(bp, params->port,
                                        ext_phy_type,
                                        ext_phy_addr,
                                        MDIO_AN_DEVAD,
                                        MDIO_AN_REG_CL37_AN, 0x1000);
-                        /* Restart autoneg */
-                        msleep(500);
 
                         if (ext_phy_type ==
                             PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-
-                        /* The SNR will improve about 2db by changing the
+                                /* The SNR will improve about 2db by changing
                                 BW and FEE main tap. Rest commands are executed
                                 after link is up*/
-                        /* Change FFE main cursor to 5 in EDC register */
+                                /*Change FFE main cursor to 5 in EDC register*/
                                 if (bnx2x_8073_is_snr_needed(params))
                                         bnx2x_cl45_write(bp, params->port,
                                                     ext_phy_type,
@@ -2626,25 +2753,28 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
                                                     MDIO_PMA_REG_EDC_FFE_MAIN,
                                                     0xFB0C);
 
-                        /* Enable FEC (Forware Error Correction)
-                           Request in the AN */
-                        bnx2x_cl45_read(bp, params->port,
-                                      ext_phy_type,
-                                      ext_phy_addr,
-                                      MDIO_AN_DEVAD,
-                                      MDIO_AN_REG_ADV2, &tmp1);
+                                /* Enable FEC (Forware Error Correction)
+                                Request in the AN */
+                                bnx2x_cl45_read(bp, params->port,
+                                              ext_phy_type,
+                                              ext_phy_addr,
+                                              MDIO_AN_DEVAD,
+                                              MDIO_AN_REG_ADV2, &tmp1);
 
-                        tmp1 |= (1<<15);
+                                tmp1 |= (1<<15);
+
+                                bnx2x_cl45_write(bp, params->port,
+                                               ext_phy_type,
+                                               ext_phy_addr,
+                                               MDIO_AN_DEVAD,
+                                               MDIO_AN_REG_ADV2, tmp1);
 
-                        bnx2x_cl45_write(bp, params->port,
-                                      ext_phy_type,
-                                      ext_phy_addr,
-                                      MDIO_AN_DEVAD,
-                                      MDIO_AN_REG_ADV2, tmp1);
                         }
 
                         bnx2x_ext_phy_set_pause(params, vars);
 
+                        /* Restart autoneg */
+                        msleep(500);
                         bnx2x_cl45_write(bp, params->port,
                                        ext_phy_type,
                                        ext_phy_addr,
@@ -2701,10 +2831,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
                 }
 
         } else { /* SerDes */
-/*              ext_phy_addr = ((bp->ext_phy_config &
-                                 PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
-                                PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
-*/
+
                 ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
@@ -2726,7 +2853,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 
 static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
-                                  struct link_vars *vars)
+                                 struct link_vars *vars)
 {
         struct bnx2x *bp = params->bp;
         u32 ext_phy_type;
@@ -2767,6 +2894,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
                                       MDIO_PMA_REG_RX_SD, &rx_sd);
                         DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
                         ext_phy_link_up = (rx_sd & 0x1);
+                        if (ext_phy_link_up)
+                                vars->line_speed = SPEED_10000;
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
@@ -2810,6 +2939,13 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
                          */
                         ext_phy_link_up = ((rx_sd & pcs_status & 0x1) ||
                                            (val2 & (1<<1)));
+                        if (ext_phy_link_up) {
+                                if (val2 & (1<<1))
+                                        vars->line_speed = SPEED_1000;
+                                else
+                                        vars->line_speed = SPEED_10000;
+                        }
+
                         /* clear LASI indication*/
                         bnx2x_cl45_read(bp, params->port, ext_phy_type,
                                       ext_phy_addr,
@@ -2820,6 +2956,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
                 {
+                        u16 link_status = 0;
+                        u16 an1000_status = 0;
                         if (ext_phy_type ==
                              PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
                                 bnx2x_cl45_read(bp, params->port,
@@ -2846,14 +2984,9 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
                                               MDIO_PMA_DEVAD,
                                               MDIO_PMA_REG_LASI_STATUS, &val1);
 
-                                bnx2x_cl45_read(bp, params->port,
-                                              ext_phy_type,
-                                              ext_phy_addr,
-                                              MDIO_PMA_DEVAD,
-                                              MDIO_PMA_REG_LASI_STATUS, &val2);
                                 DP(NETIF_MSG_LINK,
-                                         "8703 LASI status 0x%x->0x%x\n",
-                                          val1, val2);
+                                         "8703 LASI status 0x%x\n",
+                                          val1);
                         }
 
                         /* clear the interrupt LASI status register */
@@ -2869,20 +3002,23 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
                                       MDIO_PCS_REG_STATUS, &val1);
                         DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n",
                            val2, val1);
-                        /* Check the LASI */
+                        /* Clear MSG-OUT */
                         bnx2x_cl45_read(bp, params->port,
                                       ext_phy_type,
                                       ext_phy_addr,
                                       MDIO_PMA_DEVAD,
-                                      MDIO_PMA_REG_RX_ALARM, &val2);
+                                      0xca13,
+                                      &val1);
+
+                        /* Check the LASI */
                         bnx2x_cl45_read(bp, params->port,
                                       ext_phy_type,
                                       ext_phy_addr,
                                       MDIO_PMA_DEVAD,
-                                      MDIO_PMA_REG_RX_ALARM,
-                                      &val1);
-                        DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
-                           val2, val1);
+                                      MDIO_PMA_REG_RX_ALARM, &val2);
+
+                        DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);
+
                         /* Check the link status */
                         bnx2x_cl45_read(bp, params->port,
                                       ext_phy_type,
@@ -2905,29 +3041,29 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
                         DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1);
                         if (ext_phy_type ==
                             PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-                                u16 an1000_status = 0;
+
                                 if (ext_phy_link_up &&
-                                    (
-                                     (params->req_line_speed != SPEED_10000)
-                                     )) {
+                                    ((params->req_line_speed !=
+                                        SPEED_10000))) {
                                         if (bnx2x_bcm8073_xaui_wa(params)
                                              != 0) {
                                                 ext_phy_link_up = 0;
                                                 break;
                                         }
-                                        bnx2x_cl45_read(bp, params->port,
+                                }
+                                bnx2x_cl45_read(bp, params->port,
                                                       ext_phy_type,
                                                       ext_phy_addr,
-                                                      MDIO_XS_DEVAD,
+                                                      MDIO_AN_DEVAD,
                                                       0x8304,
                                                       &an1000_status);
-                                        bnx2x_cl45_read(bp, params->port,
+                                bnx2x_cl45_read(bp, params->port,
                                                       ext_phy_type,
                                                       ext_phy_addr,
-                                                      MDIO_XS_DEVAD,
+                                                      MDIO_AN_DEVAD,
                                                       0x8304,
                                                       &an1000_status);
-                                }
+
                                 /* Check the link status on 1.1.2 */
                                 bnx2x_cl45_read(bp, params->port,
                                               ext_phy_type,
@@ -2943,8 +3079,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
                                              "an_link_status=0x%x\n",
                                           val2, val1, an1000_status);
 
-                                ext_phy_link_up = (((val1 & 4) == 4) ||
-                                                    (an1000_status & (1<<1)));
+                                        ext_phy_link_up = (((val1 & 4) == 4) ||
+                                                (an1000_status & (1<<1)));
                                 if (ext_phy_link_up &&
                                     bnx2x_8073_is_snr_needed(params)) {
                                         /* The SNR will improve about 2dbby
@@ -2968,8 +3104,74 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
                                                     MDIO_PMA_REG_CDR_BANDWIDTH,
                                                     0x0333);
 
+
+                                }
+                                bnx2x_cl45_read(bp, params->port,
+                                                      ext_phy_type,
+                                                      ext_phy_addr,
+                                                      MDIO_PMA_DEVAD,
+                                                      0xc820,
+                                                      &link_status);
+
+                                /* Bits 0..2 --> speed detected,
+                                   bits 13..15--> link is down */
+                                if ((link_status & (1<<2)) &&
+                                    (!(link_status & (1<<15)))) {
+                                        ext_phy_link_up = 1;
+                                        vars->line_speed = SPEED_10000;
+                                        DP(NETIF_MSG_LINK,
+                                                 "port %x: External link"
+                                                 " up in 10G\n", params->port);
+                                } else if ((link_status & (1<<1)) &&
+                                           (!(link_status & (1<<14)))) {
+                                        ext_phy_link_up = 1;
+                                        vars->line_speed = SPEED_2500;
+                                        DP(NETIF_MSG_LINK,
+                                                 "port %x: External link"
+                                                 " up in 2.5G\n", params->port);
+                                } else if ((link_status & (1<<0)) &&
+                                           (!(link_status & (1<<13)))) {
+                                        ext_phy_link_up = 1;
+                                        vars->line_speed = SPEED_1000;
+                                        DP(NETIF_MSG_LINK,
+                                                 "port %x: External link"
+                                                 " up in 1G\n", params->port);
+                                } else {
+                                        ext_phy_link_up = 0;
+                                        DP(NETIF_MSG_LINK,
+                                                 "port %x: External link"
+                                                 " is down\n", params->port);
+                                }
+                        } else {
+                                /* See if 1G link is up for the 8072 */
+                                bnx2x_cl45_read(bp, params->port,
+                                                      ext_phy_type,
+                                                      ext_phy_addr,
+                                                      MDIO_AN_DEVAD,
+                                                      0x8304,
+                                                      &an1000_status);
+                                bnx2x_cl45_read(bp, params->port,
+                                                      ext_phy_type,
+                                                      ext_phy_addr,
+                                                      MDIO_AN_DEVAD,
+                                                      0x8304,
+                                                      &an1000_status);
+                                if (an1000_status & (1<<1)) {
+                                        ext_phy_link_up = 1;
+                                        vars->line_speed = SPEED_1000;
+                                        DP(NETIF_MSG_LINK,
+                                                 "port %x: External link"
+                                                 " up in 1G\n", params->port);
+                                } else if (ext_phy_link_up) {
+                                        ext_phy_link_up = 1;
+                                        vars->line_speed = SPEED_10000;
+                                        DP(NETIF_MSG_LINK,
+                                                 "port %x: External link"
+                                                 " up in 10G\n", params->port);
                                 }
                         }
+
+
                         break;
                 }
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
@@ -3006,6 +3208,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
                                               MDIO_AN_DEVAD,
                                               MDIO_AN_REG_MASTER_STATUS,
                                               &val2);
+                                vars->line_speed = SPEED_10000;
                                 DP(NETIF_MSG_LINK,
                                          "SFX7101 AN status 0x%x->Master=%x\n",
                                           val2,
@@ -3100,7 +3303,7 @@ static void bnx2x_link_int_enable(struct link_params *params)
  * link management
  */
 static void bnx2x_link_int_ack(struct link_params *params,
-                             struct link_vars *vars, u16 is_10g)
+                             struct link_vars *vars, u8 is_10g)
 {
         struct bnx2x *bp = params->bp;
         u8 port = params->port;
@@ -3181,7 +3384,8 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
 }
 
 
-static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
+static void bnx2x_turn_on_ef(struct bnx2x *bp, u8 port, u8 ext_phy_addr,
+                           u32 ext_phy_type)
 {
         u32 cnt = 0;
         u16 ctrl = 0;
@@ -3192,12 +3396,14 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 
         /* take ext phy out of reset */
         bnx2x_set_gpio(bp,
-                        MISC_REGISTERS_GPIO_2,
-                        MISC_REGISTERS_GPIO_HIGH);
+                          MISC_REGISTERS_GPIO_2,
+                          MISC_REGISTERS_GPIO_HIGH,
+                          port);
 
         bnx2x_set_gpio(bp,
-                        MISC_REGISTERS_GPIO_1,
-                        MISC_REGISTERS_GPIO_HIGH);
+                          MISC_REGISTERS_GPIO_1,
+                          MISC_REGISTERS_GPIO_HIGH,
+                          port);
 
         /* wait for 5ms */
         msleep(5);
@@ -3205,7 +3411,7 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
         for (cnt = 0; cnt < 1000; cnt++) {
                 msleep(1);
                 bnx2x_cl45_read(bp, port,
-                              PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
+                              ext_phy_type,
                               ext_phy_addr,
                               MDIO_PMA_DEVAD,
                               MDIO_PMA_REG_CTRL,
@@ -3217,13 +3423,17 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
         }
 }
 
-static void bnx2x_turn_off_sf(struct bnx2x *bp)
+static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port)
 {
         /* put sf to reset */
-        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, MISC_REGISTERS_GPIO_LOW);
         bnx2x_set_gpio(bp,
-                        MISC_REGISTERS_GPIO_2,
-                        MISC_REGISTERS_GPIO_LOW);
+                          MISC_REGISTERS_GPIO_1,
+                          MISC_REGISTERS_GPIO_LOW,
+                          port);
+        bnx2x_set_gpio(bp,
+                          MISC_REGISTERS_GPIO_2,
+                          MISC_REGISTERS_GPIO_LOW,
+                          port);
 }
 
 u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
@@ -3253,7 +3463,8 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 
                 /* Take ext phy out of reset */
                 if (!driver_loaded)
-                        bnx2x_turn_on_sf(bp, params->port, ext_phy_addr);
+                        bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
+                                       ext_phy_type);
 
                 /*  wait for 1ms */
                 msleep(1);
@@ -3276,11 +3487,16 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
                 version[4] = '\0';
 
                 if (!driver_loaded)
-                        bnx2x_turn_off_sf(bp);
+                        bnx2x_turn_off_sf(bp, params->port);
                 break;
         case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
         case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
         {
+                /* Take ext phy out of reset */
+                if (!driver_loaded)
+                        bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
+                                       ext_phy_type);
+
                 bnx2x_cl45_read(bp, params->port, ext_phy_type,
                               ext_phy_addr,
                               MDIO_PMA_DEVAD,
@@ -3333,7 +3549,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params,
         struct bnx2x *bp = params->bp;
 
         if (is_10g) {
-                 u32 md_devad;
+                u32 md_devad;
 
                 DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");
 
@@ -3553,6 +3769,8 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
                u16 hw_led_mode, u32 chip_id)
 {
         u8 rc = 0;
+        u32 tmp;
+        u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
         DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
         DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
                  speed, hw_led_mode);
@@ -3561,6 +3779,9 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
                 REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0);
                 REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
                            SHARED_HW_CFG_LED_MAC1);
+
+                tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+                EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
                 break;
 
         case LED_MODE_OPER:
@@ -3572,6 +3793,10 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
                            LED_BLINK_RATE_VAL);
                 REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
                            port*4, 1);
+                tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+                EMAC_WR(bp, EMAC_REG_EMAC_LED,
+                            (tmp & (~EMAC_LED_OVERRIDE)));
+
                 if (!CHIP_IS_E1H(bp) &&
                     ((speed == SPEED_2500) ||
                      (speed == SPEED_1000) ||
@@ -3622,7 +3847,8 @@ static u8 bnx2x_link_initialize(struct link_params *params,
         struct bnx2x *bp = params->bp;
         u8 port = params->port;
         u8 rc = 0;
-
+        u8 non_ext_phy;
+        u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
         /* Activate the external PHY */
         bnx2x_ext_phy_reset(params, vars);
 
@@ -3644,10 +3870,6 @@ static u8 bnx2x_link_initialize(struct link_params *params,
                 bnx2x_set_swap_lanes(params);
         }
 
-        /* Set Parallel Detect */
-        if (params->req_line_speed == SPEED_AUTO_NEG)
-                bnx2x_set_parallel_detection(params, vars->phy_flags);
-
         if (vars->phy_flags & PHY_XGXS_FLAG) {
                 if (params->req_line_speed &&
                     ((params->req_line_speed == SPEED_100) ||
@@ -3657,68 +3879,33 @@ static u8 bnx2x_link_initialize(struct link_params *params,
                         vars->phy_flags &= ~PHY_SGMII_FLAG;
                 }
         }
+        /* In case of external phy existance, the line speed would be the
+         line speed linked up by the external phy. In case it is direct only,
+          then the line_speed during initialization will be equal to the
+           req_line_speed*/
+        vars->line_speed = params->req_line_speed;
 
-        if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
-                u16 bank, rx_eq;
-
-                rx_eq = ((params->serdes_config &
-                          PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
-                         PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
+        bnx2x_calc_ieee_aneg_adv(params, &vars->ieee_fc);
 
-                DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
-                for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
-                      bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
-                        CL45_WR_OVER_CL22(bp, port,
-                                              params->phy_addr,
-                                              bank ,
-                                              MDIO_RX0_RX_EQ_BOOST,
-                                              ((rx_eq &
-                                MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
-                                MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
-                }
-
-                /* forced speed requested? */
-                if (params->req_line_speed != SPEED_AUTO_NEG) {
-                        DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
-
-                        /* disable autoneg */
-                        bnx2x_set_autoneg(params, vars);
-
-                        /* program speed and duplex */
-                        bnx2x_program_serdes(params);
-                        vars->ieee_fc =
-                                MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
-
-                } else { /* AN_mode */
-                        DP(NETIF_MSG_LINK, "not SGMII, AN\n");
-
-                        /* AN enabled */
-                        bnx2x_set_brcm_cl37_advertisment(params);
-
-                        /* program duplex & pause advertisement (for aneg) */
-                        bnx2x_set_ieee_aneg_advertisment(params,
-                                                       &vars->ieee_fc);
-
-                        /* enable autoneg */
-                        bnx2x_set_autoneg(params, vars);
-
-                        /* enable and restart AN */
-                        bnx2x_restart_autoneg(params);
-                }
-
-        } else { /* SGMII mode */
-                DP(NETIF_MSG_LINK, "SGMII\n");
-
-                bnx2x_initialize_sgmii_process(params);
+        /* init ext phy and enable link state int */
+        non_ext_phy = ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+                       (params->loopback_mode == LOOPBACK_XGXS_10) ||
+                       (params->loopback_mode == LOOPBACK_EXT_PHY));
+
+        if (non_ext_phy ||
+            (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705)) {
+                if (params->req_line_speed == SPEED_AUTO_NEG)
+                        bnx2x_set_parallel_detection(params, vars->phy_flags);
+                bnx2x_init_internal_phy(params, vars);
         }
 
-        /* init ext phy and enable link state int */
-        rc |= bnx2x_ext_phy_init(params, vars);
+        if (!non_ext_phy)
+                rc |= bnx2x_ext_phy_init(params, vars);
 
         bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-                       (NIG_STATUS_XGXS0_LINK10G |
-                        NIG_STATUS_XGXS0_LINK_STATUS |
-                        NIG_STATUS_SERDES0_LINK_STATUS));
+                     (NIG_STATUS_XGXS0_LINK10G |
+                      NIG_STATUS_XGXS0_LINK_STATUS |
+                      NIG_STATUS_SERDES0_LINK_STATUS));
 
         return rc;
 
@@ -3730,15 +3917,23 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
         struct bnx2x *bp = params->bp;
 
         u32 val;
-        DP(NETIF_MSG_LINK, "Phy Initialization started\n");
+        DP(NETIF_MSG_LINK, "Phy Initialization started \n");
         DP(NETIF_MSG_LINK, "req_speed = %d, req_flowctrl=%d\n",
                   params->req_line_speed, params->req_flow_ctrl);
         vars->link_status = 0;
+        vars->phy_link_up = 0;
+        vars->link_up = 0;
+        vars->line_speed = 0;
+        vars->duplex = DUPLEX_FULL;
+        vars->flow_ctrl = FLOW_CTRL_NONE;
+        vars->mac_type = MAC_TYPE_NONE;
+
         if (params->switch_cfg ==  SWITCH_CFG_1G)
                 vars->phy_flags = PHY_SERDES_FLAG;
         else
                 vars->phy_flags = PHY_XGXS_FLAG;
 
+
         /* disable attentions */
         bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
                        (NIG_MASK_XGXS0_LINK_STATUS |
@@ -3894,6 +4089,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
                 }
 
                 bnx2x_link_initialize(params, vars);
+                msleep(30);
                 bnx2x_link_int_enable(params);
         }
         return 0;
@@ -3943,39 +4139,22 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars)
                         /* HW reset */
 
                         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-                                       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                                          MISC_REGISTERS_GPIO_OUTPUT_LOW,
+                                          port);
 
                         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-                                       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                                          MISC_REGISTERS_GPIO_OUTPUT_LOW,
+                                          port);
 
                         DP(NETIF_MSG_LINK, "reset external PHY\n");
-                } else {
-
-                        u8 ext_phy_addr = ((ext_phy_config &
-                                         PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                         PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
-                        /* SW reset */
-                        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-                                       MDIO_PMA_DEVAD,
-                                       MDIO_PMA_REG_CTRL,
-                                       1<<15);
-
-                        /* Set Low Power Mode */
-                        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-                                  MDIO_PMA_DEVAD,
-                                  MDIO_PMA_REG_CTRL,
-                                  1<<11);
-
-
-                        if (ext_phy_type ==
-                            PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-                                DP(NETIF_MSG_LINK, "Setting 8073 port %d into"
+                } else if (ext_phy_type ==
+                           PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+                                DP(NETIF_MSG_LINK, "Setting 8073 port %d into "
                                          "low power mode\n",
                                          port);
                                 bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-                                        MISC_REGISTERS_GPIO_OUTPUT_LOW);
-                        }
+                                        MISC_REGISTERS_GPIO_OUTPUT_LOW,
+                                                  port);
                 }
         }
         /* reset the SerDes/XGXS */
@@ -3995,6 +4174,73 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars)
         return 0;
 }
 
+static u8 bnx2x_update_link_down(struct link_params *params,
+                               struct link_vars *vars)
+{
+        struct bnx2x *bp = params->bp;
+        u8 port = params->port;
+        DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
+        bnx2x_set_led(bp, port, LED_MODE_OFF,
+                    0, params->hw_led_mode,
+                    params->chip_id);
+
+        /* indicate no mac active */
+        vars->mac_type = MAC_TYPE_NONE;
+
+        /* update shared memory */
+        vars->link_status = 0;
+        vars->line_speed = 0;
+        bnx2x_update_mng(params, vars->link_status);
+
+        /* activate nig drain */
+        REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+        /* reset BigMac */
+        bnx2x_bmac_rx_disable(bp, params->port);
+        REG_WR(bp, GRCBASE_MISC +
+                   MISC_REGISTERS_RESET_REG_2_CLEAR,
+                   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+        return 0;
+}
+
+static u8 bnx2x_update_link_up(struct link_params *params,
+                             struct link_vars *vars,
+                             u8 link_10g, u32 gp_status)
+{
+        struct bnx2x *bp = params->bp;
+        u8 port = params->port;
+        u8 rc = 0;
+        vars->link_status |= LINK_STATUS_LINK_UP;
+        if (link_10g) {
+                bnx2x_bmac_enable(params, vars, 0);
+                bnx2x_set_led(bp, port, LED_MODE_OPER,
+                            SPEED_10000, params->hw_led_mode,
+                            params->chip_id);
+
+        } else {
+                bnx2x_emac_enable(params, vars, 0);
+                rc = bnx2x_emac_program(params, vars->line_speed,
+                                      vars->duplex);
+
+                /* AN complete? */
+                if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
+                        if (!(vars->phy_flags &
+                              PHY_SGMII_FLAG))
+                                bnx2x_set_sgmii_tx_driver(params);
+                }
+        }
+
+        /* PBF - link up */
+        rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
+                              vars->line_speed);
+
+        /* disable drain */
+        REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
+
+        /* update shared memory */
+        bnx2x_update_mng(params, vars->link_status);
+        return rc;
+}
 /* This function should called upon link interrupt */
 /* In case vars->link_up, driver needs to
         1. Update the pbf
@@ -4012,10 +4258,10 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 {
         struct bnx2x *bp = params->bp;
         u8 port = params->port;
-        u16 i;
         u16 gp_status;
-        u16 link_10g;
-        u8 rc = 0;
+        u8 link_10g;
+        u8 ext_phy_link_up, rc = 0;
+        u32 ext_phy_type;
 
         DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n",
          port,
@@ -4031,15 +4277,16 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
           REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
           REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
 
+        ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
-        /* avoid fast toggling */
-        for (i = 0; i < 10; i++) {
-                msleep(10);
-                CL45_RD_OVER_CL22(bp, port, params->phy_addr,
-                                      MDIO_REG_BANK_GP_STATUS,
-                                      MDIO_GP_STATUS_TOP_AN_STATUS1,
-                                      &gp_status);
-        }
+        /* Check external link change only for non-direct */
+        ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars);
+
+        /* Read gp_status */
+        CL45_RD_OVER_CL22(bp, port, params->phy_addr,
+                              MDIO_REG_BANK_GP_STATUS,
+                              MDIO_GP_STATUS_TOP_AN_STATUS1,
+                              &gp_status);
 
         rc = bnx2x_link_settings_status(params, vars, gp_status);
         if (rc != 0)
@@ -4055,73 +4302,177 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 
         bnx2x_link_int_ack(params, vars, link_10g);
 
+        /* In case external phy link is up, and internal link is down
+        ( not initialized yet probably after link initialization, it needs
+        to be initialized.
+        Note that after link down-up as result of cable plug,
+        the xgxs link would probably become up again without the need to
+        initialize it*/
+
+        if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+            (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
+            (ext_phy_link_up && !vars->phy_link_up))
+                bnx2x_init_internal_phy(params, vars);
+
         /* link is up only if both local phy and external phy are up */
-        vars->link_up = (vars->phy_link_up &&
-                           bnx2x_ext_phy_is_link_up(params, vars));
+        vars->link_up = (ext_phy_link_up && vars->phy_link_up);
 
-        if (!vars->phy_link_up &&
-            REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18)) {
-                bnx2x_ext_phy_is_link_up(params, vars); /* Clear interrupt */
+        if (vars->link_up)
+                rc = bnx2x_update_link_up(params, vars, link_10g, gp_status);
+        else
+                rc = bnx2x_update_link_down(params, vars);
+
+        return rc;
+}
+
+static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+        u8 ext_phy_addr[PORT_MAX];
+        u16 val;
+        s8 port;
+
+        /* PART1 - Reset both phys */
+        for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+                /* Extract the ext phy address for the port */
+                u32 ext_phy_config = REG_RD(bp, shmem_base +
+                                        offsetof(struct shmem_region,
+                   dev_info.port_hw_config[port].external_phy_config));
+
+                /* disable attentions */
+                bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+                             (NIG_MASK_XGXS0_LINK_STATUS |
+                              NIG_MASK_XGXS0_LINK10G |
+                              NIG_MASK_SERDES0_LINK_STATUS |
+                              NIG_MASK_MI_INT));
+
+                ext_phy_addr[port] =
+                        ((ext_phy_config &
+                              PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                              PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+                /* Need to take the phy out of low power mode in order
+                        to write to access its registers */
+                bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+                                  MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+
+                /* Reset the phy */
+                bnx2x_cl45_write(bp, port,
+                               PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                               ext_phy_addr[port],
+                               MDIO_PMA_DEVAD,
+                               MDIO_PMA_REG_CTRL,
+                               1<<15);
         }
 
-        if (vars->link_up) {
-                vars->link_status |= LINK_STATUS_LINK_UP;
-                if (link_10g) {
-                        bnx2x_bmac_enable(params, vars, 0);
-                        bnx2x_set_led(bp, port, LED_MODE_OPER,
-                                    SPEED_10000, params->hw_led_mode,
-                                    params->chip_id);
+        /* Add delay of 150ms after reset */
+        msleep(150);
 
-                } else {
-                        bnx2x_emac_enable(params, vars, 0);
-                        rc = bnx2x_emac_program(params, vars->line_speed,
-                                              vars->duplex);
+        /* PART2 - Download firmware to both phys */
+        for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+                u16 fw_ver1;
 
-                        /* AN complete? */
-                        if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
-                                if (!(vars->phy_flags &
-                                      PHY_SGMII_FLAG))
-                                        bnx2x_set_sgmii_tx_driver(params);
-                        }
+                bnx2x_bcm8073_external_rom_boot(bp, port,
+                                                      ext_phy_addr[port]);
+
+                bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                              ext_phy_addr[port],
+                              MDIO_PMA_DEVAD,
+                              MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+                if (fw_ver1 == 0) {
+                        DP(NETIF_MSG_LINK,
+                                 "bnx2x_8073_common_init_phy port %x "
+                                 "fw Download failed\n", port);
+                        return -EINVAL;
                 }
 
-                /* PBF - link up */
-                rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
-                                      vars->line_speed);
+                /* Only set bit 10 = 1 (Tx power down) */
+                bnx2x_cl45_read(bp, port,
+                              PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                              ext_phy_addr[port],
+                              MDIO_PMA_DEVAD,
+                              MDIO_PMA_REG_TX_POWER_DOWN, &val);
 
-                /* disable drain */
-                REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
+                /* Phase1 of TX_POWER_DOWN reset */
+                bnx2x_cl45_write(bp, port,
+                               PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                               ext_phy_addr[port],
+                               MDIO_PMA_DEVAD,
+                               MDIO_PMA_REG_TX_POWER_DOWN,
+                               (val | 1<<10));
+        }
 
-                /* update shared memory */
-                bnx2x_update_mng(params, vars->link_status);
+        /* Toggle Transmitter: Power down and then up with 600ms
+           delay between */
+        msleep(600);
 
-        } else { /* link down */
-                DP(NETIF_MSG_LINK, "Port %x: Link is down\n", params->port);
-                bnx2x_set_led(bp, port, LED_MODE_OFF,
-                            0, params->hw_led_mode,
-                            params->chip_id);
+        /* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */
+        for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+                /* Phase2 of POWER_DOWN_RESET*/
+                /* Release bit 10 (Release Tx power down) */
+                bnx2x_cl45_read(bp, port,
+                              PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                              ext_phy_addr[port],
+                              MDIO_PMA_DEVAD,
+                              MDIO_PMA_REG_TX_POWER_DOWN, &val);
 
-                /* indicate no mac active */
-                vars->mac_type = MAC_TYPE_NONE;
+                bnx2x_cl45_write(bp, port,
+                               PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                               ext_phy_addr[port],
+                               MDIO_PMA_DEVAD,
+                               MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
+                msleep(15);
 
-                /* update shared memory */
-                vars->link_status = 0;
-                bnx2x_update_mng(params, vars->link_status);
+                /* Read modify write the SPI-ROM version select register */
+                bnx2x_cl45_read(bp, port,
+                              PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                              ext_phy_addr[port],
+                              MDIO_PMA_DEVAD,
+                              MDIO_PMA_REG_EDC_FFE_MAIN, &val);
+                bnx2x_cl45_write(bp, port,
+                              PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+                              ext_phy_addr[port],
+                              MDIO_PMA_DEVAD,
+                              MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12)));
 
-                /* activate nig drain */
-                REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+                /* set GPIO2 back to LOW */
+                bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+                                  MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+        }
+        return 0;
 
-                /* reset BigMac */
-                bnx2x_bmac_rx_disable(bp, params->port);
-                REG_WR(bp, GRCBASE_MISC +
-                           MISC_REGISTERS_RESET_REG_2_CLEAR,
-                           (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+}
 
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+        u8 rc = 0;
+        u32 ext_phy_type;
+
+        DP(NETIF_MSG_LINK, "bnx2x_common_init_phy\n");
+
+        /* Read the ext_phy_type for arbitrary port(0) */
+        ext_phy_type = XGXS_EXT_PHY_TYPE(
+                        REG_RD(bp, shmem_base +
+                           offsetof(struct shmem_region,
+                             dev_info.port_hw_config[0].external_phy_config)));
+
+        switch (ext_phy_type) {
+        case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+        {
+                rc = bnx2x_8073_common_init_phy(bp, shmem_base);
+                break;
+        }
+        default:
+                DP(NETIF_MSG_LINK,
+                         "bnx2x_common_init_phy: ext_phy 0x%x not required\n",
+                         ext_phy_type);
+                break;
         }
 
         return rc;
 }
 
+
+
 static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
 {
         u16 val, cnt;
@@ -4154,7 +4505,7 @@ static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
 }
 #define RESERVED_SIZE 256
 /* max application is 160K bytes - data at end of RAM */
-#define MAX_APP_SIZE 160*1024 - RESERVED_SIZE
+#define MAX_APP_SIZE (160*1024 - RESERVED_SIZE)
 
 /* Header is 14 bytes */
 #define HEADER_SIZE 14
@@ -4192,12 +4543,12 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
                 size = MAX_APP_SIZE+HEADER_SIZE;
         }
         DP(NETIF_MSG_LINK, "File version is %c%c\n", data[0x14e], data[0x14f]);
-        DP(NETIF_MSG_LINK, "                %c%c\n", data[0x150], data[0x151]);
+        DP(NETIF_MSG_LINK, "          %c%c\n", data[0x150], data[0x151]);
         /* Put the DSP in download mode by setting FLASH_CFG[2] to 1
            and issuing a reset.*/
 
         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
-                          MISC_REGISTERS_GPIO_HIGH);
+                          MISC_REGISTERS_GPIO_HIGH, port);
 
         bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
 
@@ -4429,7 +4780,8 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
         }
 
         /* DSP Remove Download Mode */
-        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, MISC_REGISTERS_GPIO_LOW);
+        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+                          MISC_REGISTERS_GPIO_LOW, port);
 
         bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
 
@@ -4437,7 +4789,7 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
         for (cnt = 0; cnt < 100; cnt++)
                 msleep(5);
 
-        bnx2x_hw_reset(bp);
+        bnx2x_hw_reset(bp, port);
 
         for (cnt = 0; cnt < 100; cnt++)
                 msleep(5);
@@ -4473,7 +4825,7 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
                       MDIO_PMA_REG_7101_VER2,
                       &image_revision2);
 
-        if (data[0x14e] != (image_revision2&0xFF) ||
+        if (data[0x14e] != (image_revision2&0xFF) ||
             data[0x14f] != ((image_revision2&0xFF00)>>8) ||
             data[0x150] != (image_revision1&0xFF) ||
             data[0x151] != ((image_revision1&0xFF00)>>8)) {
@@ -4508,11 +4860,11 @@ u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
         case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
                 /* Take ext phy out of reset */
                 if (!driver_loaded)
-                        bnx2x_turn_on_sf(bp, port, ext_phy_addr);
+                        bnx2x_turn_on_ef(bp, port, ext_phy_addr, ext_phy_type);
                 rc = bnx2x_sfx7101_flash_download(bp, port, ext_phy_addr,
                                                 data, size);
                 if (!driver_loaded)
-                        bnx2x_turn_off_sf(bp);
+                        bnx2x_turn_off_sf(bp, port);
                 break;
         case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
         case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index 714d37ac95de..86d54a17b411 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -55,14 +55,17 @@ struct link_params {
 #define LOOPBACK_BMAC   2
 #define LOOPBACK_XGXS_10        3
 #define LOOPBACK_EXT_PHY        4
+#define LOOPBACK_EXT    5
 
         u16 req_duplex;
         u16 req_flow_ctrl;
+        u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
+        req_flow_ctrl is set to AUTO */
         u16 req_line_speed; /* Also determine AutoNeg */
 
         /* Device parameters */
         u8 mac_addr[6];
-        u16 mtu;
+
 
 
         /* shmem parameters */
@@ -140,7 +143,7 @@ u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
                   u8 phy_addr, u8 devad, u16 reg, u16 val);
 
 /* Reads the link_status from the shmem,
-   and update the link vars accordinaly */
+   and update the link vars accordingly */
 void bnx2x_link_status_update(struct link_params *input,
                             struct link_vars *output);
 /* returns string representing the fw_version of the external phy */
@@ -149,7 +152,7 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 
 /* Set/Unset the led
    Basically, the CLC takes care of the led for the link, but in case one needs
-   to set/unset the led unnatually, set the "mode" to LED_MODE_OPER to
+   to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
    blink the led, and LED_MODE_OFF to set the led off.*/
 u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
                u16 hw_led_mode, u32 chip_id);
@@ -164,5 +167,7 @@ u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
         otherwise link is down*/
 u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars);
 
+/* One-time initialization for external phy after power up */
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
 
 #endif /* BNX2X_LINK_H */
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 272a4bd25953..3e7dc171cdf1 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -60,8 +60,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION      "1.45.6"
-#define DRV_MODULE_RELDATE      "2008/06/23"
+#define DRV_MODULE_VERSION      "1.45.17"
+#define DRV_MODULE_RELDATE      "2008/08/13"
 #define BNX2X_BC_VER            0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
@@ -76,23 +76,21 @@ MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
+static int disable_tpa;
 static int use_inta;
 static int poll;
 static int debug;
-static int disable_tpa;
-static int nomcp;
 static int load_count[3]; /* 0-common, 1-port0, 2-port1 */
 static int use_multi;
 
+module_param(disable_tpa, int, 0);
 module_param(use_inta, int, 0);
 module_param(poll, int, 0);
 module_param(debug, int, 0);
-module_param(disable_tpa, int, 0);
-module_param(nomcp, int, 0);
+MODULE_PARM_DESC(disable_tpa, "disable the TPA (LRO) feature");
 MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X");
 MODULE_PARM_DESC(poll, "use polling (for debug)");
 MODULE_PARM_DESC(debug, "default debug msglevel");
-MODULE_PARM_DESC(nomcp, "ignore management CPU");
 
 #ifdef BNX2X_MULTI
 module_param(use_multi, int, 0);
@@ -237,17 +235,16 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
         while (*wb_comp != DMAE_COMP_VAL) {
                 DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp);
 
-                /* adjust delay for emulation/FPGA */
-                if (CHIP_REV_IS_SLOW(bp))
-                        msleep(100);
-                else
-                        udelay(5);
-
                 if (!cnt) {
                         BNX2X_ERR("dmae timeout!\n");
                         break;
                 }
                 cnt--;
+                /* adjust delay for emulation/FPGA */
+                if (CHIP_REV_IS_SLOW(bp))
+                        msleep(100);
+                else
+                        udelay(5);
         }
 
         mutex_unlock(&bp->dmae_mutex);
@@ -310,17 +307,16 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
 
         while (*wb_comp != DMAE_COMP_VAL) {
 
-                /* adjust delay for emulation/FPGA */
-                if (CHIP_REV_IS_SLOW(bp))
-                        msleep(100);
-                else
-                        udelay(5);
-
                 if (!cnt) {
                         BNX2X_ERR("dmae timeout!\n");
                         break;
                 }
                 cnt--;
+                /* adjust delay for emulation/FPGA */
+                if (CHIP_REV_IS_SLOW(bp))
+                        msleep(100);
+                else
+                        udelay(5);
         }
         DP(BNX2X_MSG_OFF, "data [0x%08x 0x%08x 0x%08x 0x%08x]\n",
            bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
@@ -503,6 +499,9 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
         int i;
         u16 j, start, end;
 
+        bp->stats_state = STATS_STATE_DISABLED;
+        DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
+
         BNX2X_ERR("begin crash dump -----------------\n");
 
         for_each_queue(bp, i) {
@@ -513,17 +512,20 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
                           "  tx_bd_prod(%x)  tx_bd_cons(%x)  *tx_cons_sb(%x)\n",
                           i, fp->tx_pkt_prod, fp->tx_pkt_cons, fp->tx_bd_prod,
                           fp->tx_bd_cons, le16_to_cpu(*fp->tx_cons_sb));
-                BNX2X_ERR("          rx_comp_prod(%x)  rx_comp_cons(%x)"
-                          "  *rx_cons_sb(%x)  *rx_bd_cons_sb(%x)"
-                          "  rx_sge_prod(%x)  last_max_sge(%x)\n",
-                          fp->rx_comp_prod, fp->rx_comp_cons,
-                          le16_to_cpu(*fp->rx_cons_sb),
-                          le16_to_cpu(*fp->rx_bd_cons_sb),
-                          fp->rx_sge_prod, fp->last_max_sge);
-                BNX2X_ERR("          fp_c_idx(%x)  fp_u_idx(%x)"
-                          "  bd data(%x,%x)  rx_alloc_failed(%lx)\n",
-                          fp->fp_c_idx, fp->fp_u_idx, hw_prods->packets_prod,
-                          hw_prods->bds_prod, fp->rx_alloc_failed);
+                BNX2X_ERR("          rx_bd_prod(%x)  rx_bd_cons(%x)"
+                          "  *rx_bd_cons_sb(%x)  rx_comp_prod(%x)"
+                          "  rx_comp_cons(%x)  *rx_cons_sb(%x)\n",
+                          fp->rx_bd_prod, fp->rx_bd_cons,
+                          le16_to_cpu(*fp->rx_bd_cons_sb), fp->rx_comp_prod,
+                          fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
+                BNX2X_ERR("          rx_sge_prod(%x)  last_max_sge(%x)"
+                          "  fp_c_idx(%x)  *sb_c_idx(%x)  fp_u_idx(%x)"
+                          "  *sb_u_idx(%x)  bd data(%x,%x)\n",
+                          fp->rx_sge_prod, fp->last_max_sge, fp->fp_c_idx,
+                          fp->status_blk->c_status_block.status_block_index,
+                          fp->fp_u_idx,
+                          fp->status_blk->u_status_block.status_block_index,
+                          hw_prods->packets_prod, hw_prods->bds_prod);
 
                 start = TX_BD(le16_to_cpu(*fp->tx_cons_sb) - 10);
                 end = TX_BD(le16_to_cpu(*fp->tx_cons_sb) + 245);
@@ -553,8 +555,8 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
                                   j, rx_bd[1], rx_bd[0], sw_bd->skb);
                 }
 
-                start = 0;
-                end = RX_SGE_CNT*NUM_RX_SGE_PAGES;
+                start = RX_SGE(fp->rx_sge_prod);
+                end = RX_SGE(fp->last_max_sge);
                 for (j = start; j < end; j++) {
                         u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
                         struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
@@ -582,9 +584,6 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
         bnx2x_fw_dump(bp);
         bnx2x_mc_assert(bp);
         BNX2X_ERR("end crash dump -----------------\n");
-
-        bp->stats_state = STATS_STATE_DISABLED;
-        DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
 }
 
 static void bnx2x_int_enable(struct bnx2x *bp)
@@ -684,7 +683,8 @@ static void bnx2x_int_disable_sync(struct bnx2x *bp)
 static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 sb_id,
                                 u8 storm, u16 index, u8 op, u8 update)
 {
-        u32 igu_addr = (IGU_ADDR_INT_ACK + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
+        u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
+                       COMMAND_REG_INT_ACK);
         struct igu_ack_register igu_ack;
 
         igu_ack.status_block_index = index;
@@ -694,9 +694,9 @@ static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 sb_id,
                          (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) |
                          (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT));
 
-        DP(BNX2X_MSG_OFF, "write 0x%08x to IGU addr 0x%x\n",
-           (*(u32 *)&igu_ack), BAR_IGU_INTMEM + igu_addr);
-        REG_WR(bp, BAR_IGU_INTMEM + igu_addr, (*(u32 *)&igu_ack));
+        DP(BNX2X_MSG_OFF, "write 0x%08x to HC addr 0x%x\n",
+           (*(u32 *)&igu_ack), hc_addr);
+        REG_WR(bp, hc_addr, (*(u32 *)&igu_ack));
 }
 
 static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
@@ -716,36 +716,15 @@ static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
         return rc;
 }
 
-static inline int bnx2x_has_work(struct bnx2x_fastpath *fp)
-{
-        u16 rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-
-        if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-                rx_cons_sb++;
-
-        if ((fp->rx_comp_cons != rx_cons_sb) ||
-            (fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) ||
-            (fp->tx_pkt_prod != fp->tx_pkt_cons))
-                return 1;
-
-        return 0;
-}
-
 static u16 bnx2x_ack_int(struct bnx2x *bp)
 {
-        u32 igu_addr = (IGU_ADDR_SIMD_MASK + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
-        u32 result = REG_RD(bp, BAR_IGU_INTMEM + igu_addr);
+        u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
+                       COMMAND_REG_SIMD_MASK);
+        u32 result = REG_RD(bp, hc_addr);
 
-        DP(BNX2X_MSG_OFF, "read 0x%08x from IGU addr 0x%x\n",
-           result, BAR_IGU_INTMEM + igu_addr);
+        DP(BNX2X_MSG_OFF, "read 0x%08x from HC addr 0x%x\n",
+           result, hc_addr);
 
-#ifdef IGU_DEBUG
-#warning IGU_DEBUG active
-        if (result == 0) {
-                BNX2X_ERR("read %x from IGU\n", result);
-                REG_WR(bp, TM_REG_TIMER_SOFT_RST, 0);
-        }
-#endif
         return result;
 }
 
@@ -898,6 +877,7 @@ static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work)
                 netif_tx_lock(bp->dev);
 
                 if (netif_queue_stopped(bp->dev) &&
+                    (bp->state == BNX2X_STATE_OPEN) &&
                     (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3))
                         netif_wake_queue(bp->dev);
 
@@ -905,6 +885,7 @@ static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work)
         }
 }
 
+
 static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
                            union eth_rx_cqe *rr_cqe)
 {
@@ -960,6 +941,7 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
                 bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
                 break;
 
+
         case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
         case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DIAG):
                 DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
@@ -1169,8 +1151,8 @@ static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp)
         memset(fp->sge_mask, 0xff,
                (NUM_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT)*sizeof(u64));
 
-        /* Clear the two last indeces in the page to 1:
-           these are the indeces that correspond to the "next" element,
+        /* Clear the two last indices in the page to 1:
+           these are the indices that correspond to the "next" element,
            hence will never be indicated and should be removed from
            the calculations. */
         bnx2x_clear_sge_mask_next_elems(fp);
@@ -1261,7 +1243,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
                    where we are and drop the whole packet */
                 err = bnx2x_alloc_rx_sge(bp, fp, sge_idx);
                 if (unlikely(err)) {
-                        fp->rx_alloc_failed++;
+                        bp->eth_stats.rx_skb_alloc_failed++;
                         return err;
                 }
 
@@ -1297,14 +1279,13 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
         pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping),
                          bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
 
-        /* if alloc failed drop the packet and keep the buffer in the bin */
         if (likely(new_skb)) {
+                /* fix ip xsum and give it to the stack */
+                /* (no need to map the new skb) */
 
                 prefetch(skb);
                 prefetch(((char *)(skb)) + 128);
 
-                /* else fix ip xsum and give it to the stack */
-                /* (no need to map the new skb) */
 #ifdef BNX2X_STOP_ON_ERROR
                 if (pad + len > bp->rx_buf_size) {
                         BNX2X_ERR("skb_put is about to fail...  "
@@ -1353,9 +1334,10 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
                 fp->tpa_pool[queue].skb = new_skb;
 
         } else {
+                /* else drop the packet and keep the buffer in the bin */
                 DP(NETIF_MSG_RX_STATUS,
                    "Failed to allocate new skb - dropping packet!\n");
-                fp->rx_alloc_failed++;
+                bp->eth_stats.rx_skb_alloc_failed++;
         }
 
         fp->tpa_state[queue] = BNX2X_TPA_STOP;
@@ -1390,7 +1372,6 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
         u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
         u16 hw_comp_cons, sw_comp_cons, sw_comp_prod;
         int rx_pkt = 0;
-        u16 queue;
 
 #ifdef BNX2X_STOP_ON_ERROR
         if (unlikely(bp->panic))
@@ -1456,7 +1437,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
                         if ((!fp->disable_tpa) &&
                             (TPA_TYPE(cqe_fp_flags) !=
                                         (TPA_TYPE_START | TPA_TYPE_END))) {
-                                queue = cqe->fast_path_cqe.queue_index;
+                                u16 queue = cqe->fast_path_cqe.queue_index;
 
                                 if (TPA_TYPE(cqe_fp_flags) == TPA_TYPE_START) {
                                         DP(NETIF_MSG_RX_STATUS,
@@ -1503,11 +1484,10 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 
                         /* is this an error packet? */
                         if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
-                        /* do we sometimes forward error packets anyway? */
                                 DP(NETIF_MSG_RX_ERR,
                                    "ERROR  flags %x  rx packet %u\n",
                                    cqe_fp_flags, sw_comp_cons);
-                                /* TBD make sure MC counts this as a drop */
+                                bp->eth_stats.rx_err_discard_pkt++;
                                 goto reuse_rx;
                         }
 
@@ -1524,7 +1504,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
                                         DP(NETIF_MSG_RX_ERR,
                                            "ERROR  packet dropped "
                                            "because of alloc failure\n");
-                                        fp->rx_alloc_failed++;
+                                        bp->eth_stats.rx_skb_alloc_failed++;
                                         goto reuse_rx;
                                 }
 
@@ -1550,7 +1530,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
                                 DP(NETIF_MSG_RX_ERR,
                                    "ERROR  packet dropped because "
                                    "of alloc failure\n");
-                                fp->rx_alloc_failed++;
+                                bp->eth_stats.rx_skb_alloc_failed++;
 reuse_rx:
                                 bnx2x_reuse_rx_skb(fp, skb, bd_cons, bd_prod);
                                 goto next_rx;
@@ -1559,10 +1539,12 @@ reuse_rx:
                         skb->protocol = eth_type_trans(skb, bp->dev);
 
                         skb->ip_summed = CHECKSUM_NONE;
-                        if (bp->rx_csum && BNX2X_RX_SUM_OK(cqe))
-                                skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-                        /* TBD do we pass bad csum packets in promisc */
+                        if (bp->rx_csum) {
+                                if (likely(BNX2X_RX_CSUM_OK(cqe)))
+                                        skb->ip_summed = CHECKSUM_UNNECESSARY;
+                                else
+                                        bp->eth_stats.hw_csum_err++;
+                        }
                 }
 
 #ifdef BCM_VLAN
@@ -1615,6 +1597,12 @@ static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie)
         struct net_device *dev = bp->dev;
         int index = FP_IDX(fp);
 
+        /* Return here if interrupt is disabled */
+        if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
+                DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+                return IRQ_HANDLED;
+        }
+
         DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB [%d:%d]\n",
            index, FP_SB_ID(fp));
         bnx2x_ack_sb(bp, FP_SB_ID(fp), USTORM_ID, 0, IGU_INT_DISABLE, 0);
@@ -1648,17 +1636,17 @@ static irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
         }
         DP(NETIF_MSG_INTR, "got an interrupt  status %u\n", status);
 
-#ifdef BNX2X_STOP_ON_ERROR
-        if (unlikely(bp->panic))
-                return IRQ_HANDLED;
-#endif
-
         /* Return here if interrupt is disabled */
         if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
                 DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
                 return IRQ_HANDLED;
         }
 
+#ifdef BNX2X_STOP_ON_ERROR
+        if (unlikely(bp->panic))
+                return IRQ_HANDLED;
+#endif
+
         mask = 0x2 << bp->fp[0].sb_id;
         if (status & mask) {
                 struct bnx2x_fastpath *fp = &bp->fp[0];
@@ -1699,11 +1687,12 @@ static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event);
  * General service functions
  */
 
-static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
+static int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
 {
         u32 lock_status;
         u32 resource_bit = (1 << resource);
-        u8 port = BP_PORT(bp);
+        int func = BP_FUNC(bp);
+        u32 hw_lock_control_reg;
         int cnt;
 
         /* Validating that the resource is within range */
@@ -1714,8 +1703,15 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
                 return -EINVAL;
         }
 
+        if (func <= 5) {
+                hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+        } else {
+                hw_lock_control_reg =
+                                (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+        }
+
         /* Validating that the resource is not already taken */
-        lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+        lock_status = REG_RD(bp, hw_lock_control_reg);
         if (lock_status & resource_bit) {
                 DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
                    lock_status, resource_bit);
@@ -1725,9 +1721,8 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
         /* Try for 1 second every 5ms */
         for (cnt = 0; cnt < 200; cnt++) {
                 /* Try to acquire the lock */
-                REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8 + 4,
-                       resource_bit);
-                lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+                REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
+                lock_status = REG_RD(bp, hw_lock_control_reg);
                 if (lock_status & resource_bit)
                         return 0;
 
@@ -1737,11 +1732,12 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
         return -EAGAIN;
 }
 
-static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
+static int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource)
 {
         u32 lock_status;
         u32 resource_bit = (1 << resource);
-        u8 port = BP_PORT(bp);
+        int func = BP_FUNC(bp);
+        u32 hw_lock_control_reg;
 
         /* Validating that the resource is within range */
         if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
@@ -1751,20 +1747,27 @@ static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
                 return -EINVAL;
         }
 
+        if (func <= 5) {
+                hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+        } else {
+                hw_lock_control_reg =
+                                (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+        }
+
         /* Validating that the resource is currently taken */
-        lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+        lock_status = REG_RD(bp, hw_lock_control_reg);
         if (!(lock_status & resource_bit)) {
                 DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
                    lock_status, resource_bit);
                 return -EFAULT;
         }
 
-        REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8, resource_bit);
+        REG_WR(bp, hw_lock_control_reg, resource_bit);
         return 0;
 }
 
 /* HW Lock for shared dual port PHYs */
-static void bnx2x_phy_hw_lock(struct bnx2x *bp)
+static void bnx2x_acquire_phy_lock(struct bnx2x *bp)
 {
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
 
@@ -1772,25 +1775,25 @@ static void bnx2x_phy_hw_lock(struct bnx2x *bp)
 
         if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
             (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
-                bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
 }
 
-static void bnx2x_phy_hw_unlock(struct bnx2x *bp)
+static void bnx2x_release_phy_lock(struct bnx2x *bp)
 {
         u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
 
         if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
             (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
-                bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
 
         mutex_unlock(&bp->port.phy_mutex);
 }
 
-int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
 {
         /* The GPIO should be swapped if swap register is set and active */
         int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
-                         REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ BP_PORT(bp);
+                         REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
         int gpio_shift = gpio_num +
                         (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
         u32 gpio_mask = (1 << gpio_shift);
@@ -1801,7 +1804,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
                 return -EINVAL;
         }
 
-        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+        bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
         /* read GPIO and mask except the float bits */
         gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
 
@@ -1822,7 +1825,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
                 gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
                 break;
 
-        case MISC_REGISTERS_GPIO_INPUT_HI_Z :
+        case MISC_REGISTERS_GPIO_INPUT_HI_Z:
                 DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
                    gpio_num, gpio_shift);
                 /* set FLOAT */
@@ -1834,7 +1837,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
         }
 
         REG_WR(bp, MISC_REG_GPIO, gpio_reg);
-        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO);
+        bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
 
         return 0;
 }
@@ -1850,19 +1853,19 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
                 return -EINVAL;
         }
 
-        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+        bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
         /* read SPIO and mask except the float bits */
         spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
 
         switch (mode) {
-        case MISC_REGISTERS_SPIO_OUTPUT_LOW :
+        case MISC_REGISTERS_SPIO_OUTPUT_LOW:
                 DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
                 /* clear FLOAT and set CLR */
                 spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
                 spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
                 break;
 
-        case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
+        case MISC_REGISTERS_SPIO_OUTPUT_HIGH:
                 DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
                 /* clear FLOAT and set SET */
                 spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
@@ -1880,7 +1883,7 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
         }
 
         REG_WR(bp, MISC_REG_SPIO, spio_reg);
-        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO);
+        bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
 
         return 0;
 }
@@ -1940,46 +1943,63 @@ static void bnx2x_link_report(struct bnx2x *bp)
 
 static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
 {
-        u8 rc;
+        if (!BP_NOMCP(bp)) {
+                u8 rc;
 
-        /* Initialize link parameters structure variables */
-        bp->link_params.mtu = bp->dev->mtu;
+                /* Initialize link parameters structure variables */
+                /* It is recommended to turn off RX FC for jumbo frames
+                   for better performance */
+                if (IS_E1HMF(bp))
+                        bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
+                else if (bp->dev->mtu > 5000)
+                        bp->link_params.req_fc_auto_adv = FLOW_CTRL_TX;
+                else
+                        bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
 
-        bnx2x_phy_hw_lock(bp);
-        rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-        bnx2x_phy_hw_unlock(bp);
+                bnx2x_acquire_phy_lock(bp);
+                rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+                bnx2x_release_phy_lock(bp);
 
-        if (bp->link_vars.link_up)
-                bnx2x_link_report(bp);
+                if (bp->link_vars.link_up)
+                        bnx2x_link_report(bp);
 
-        bnx2x_calc_fc_adv(bp);
+                bnx2x_calc_fc_adv(bp);
 
-        return rc;
+                return rc;
+        }
+        BNX2X_ERR("Bootcode is missing -not initializing link\n");
+        return -EINVAL;
 }
 
 static void bnx2x_link_set(struct bnx2x *bp)
 {
-        bnx2x_phy_hw_lock(bp);
-        bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-        bnx2x_phy_hw_unlock(bp);
+        if (!BP_NOMCP(bp)) {
+                bnx2x_acquire_phy_lock(bp);
+                bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+                bnx2x_release_phy_lock(bp);
 
-        bnx2x_calc_fc_adv(bp);
+                bnx2x_calc_fc_adv(bp);
+        } else
+                BNX2X_ERR("Bootcode is missing -not setting link\n");
 }
 
 static void bnx2x__link_reset(struct bnx2x *bp)
 {
-        bnx2x_phy_hw_lock(bp);
-        bnx2x_link_reset(&bp->link_params, &bp->link_vars);
-        bnx2x_phy_hw_unlock(bp);
+        if (!BP_NOMCP(bp)) {
+                bnx2x_acquire_phy_lock(bp);
+                bnx2x_link_reset(&bp->link_params, &bp->link_vars);
+                bnx2x_release_phy_lock(bp);
+        } else
+                BNX2X_ERR("Bootcode is missing -not resetting link\n");
 }
 
 static u8 bnx2x_link_test(struct bnx2x *bp)
 {
         u8 rc;
 
-        bnx2x_phy_hw_lock(bp);
+        bnx2x_acquire_phy_lock(bp);
         rc = bnx2x_test_link(&bp->link_params, &bp->link_vars);
-        bnx2x_phy_hw_unlock(bp);
+        bnx2x_release_phy_lock(bp);
 
         return rc;
 }
@@ -1991,7 +2011,7 @@ static u8 bnx2x_link_test(struct bnx2x *bp)
      sum of vn_min_rates
        or
      0 - if all the min_rates are 0.
-     In the later case fainess algorithm should be deactivated.
+     In the later case fairness algorithm should be deactivated.
      If not all min_rates are zero then those that are zeroes will
      be set to 1.
  */
@@ -2114,7 +2134,7 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func,
                                 FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
                 /* If FAIRNESS is enabled (not all min rates are zeroes) and
                    if current min rate is zero - set it to 1.
-                   This is a requirment of the algorithm. */
+                   This is a requirement of the algorithm. */
                 if ((vn_min_rate == 0) && wsum)
                         vn_min_rate = DEF_MIN_RATE;
                 vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
@@ -2203,9 +2223,9 @@ static void bnx2x_link_attn(struct bnx2x *bp)
         /* Make sure that we are synced with the current statistics */
         bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-        bnx2x_phy_hw_lock(bp);
+        bnx2x_acquire_phy_lock(bp);
         bnx2x_link_update(&bp->link_params, &bp->link_vars);
-        bnx2x_phy_hw_unlock(bp);
+        bnx2x_release_phy_lock(bp);
 
         if (bp->link_vars.link_up) {
 
@@ -2357,7 +2377,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
 }
 
 /* acquire split MCP access lock register */
-static int bnx2x_lock_alr(struct bnx2x *bp)
+static int bnx2x_acquire_alr(struct bnx2x *bp)
 {
         u32 i, j, val;
         int rc = 0;
@@ -2374,15 +2394,15 @@ static int bnx2x_lock_alr(struct bnx2x *bp)
                 msleep(5);
         }
         if (!(val & (1L << 31))) {
-                BNX2X_ERR("Cannot acquire nvram interface\n");
+                BNX2X_ERR("Cannot acquire MCP access lock register\n");
                 rc = -EBUSY;
         }
 
         return rc;
 }
 
-/* Release split MCP access lock register */
-static void bnx2x_unlock_alr(struct bnx2x *bp)
+/* release split MCP access lock register */
+static void bnx2x_release_alr(struct bnx2x *bp)
 {
         u32 val = 0;
 
@@ -2395,7 +2415,6 @@ static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
         u16 rc = 0;
 
         barrier(); /* status block is written to by the chip */
-
         if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
                 bp->def_att_idx = def_sb->atten_status_block.attn_bits_index;
                 rc |= 1;
@@ -2426,26 +2445,31 @@ static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
 static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 {
         int port = BP_PORT(bp);
-        int func = BP_FUNC(bp);
-        u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_FUNC_BASE * func) * 8;
+        u32 hc_addr = (HC_REG_COMMAND_REG + port*32 +
+                       COMMAND_REG_ATTN_BITS_SET);
         u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
                               MISC_REG_AEU_MASK_ATTN_FUNC_0;
         u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
                                        NIG_REG_MASK_INTERRUPT_PORT0;
+        u32 aeu_mask;
 
-        if (~bp->aeu_mask & (asserted & 0xff))
-                BNX2X_ERR("IGU ERROR\n");
         if (bp->attn_state & asserted)
                 BNX2X_ERR("IGU ERROR\n");
 
+        bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+        aeu_mask = REG_RD(bp, aeu_addr);
+
         DP(NETIF_MSG_HW, "aeu_mask %x  newly asserted %x\n",
-           bp->aeu_mask, asserted);
-        bp->aeu_mask &= ~(asserted & 0xff);
-        DP(NETIF_MSG_HW, "after masking: aeu_mask %x\n", bp->aeu_mask);
+           aeu_mask, asserted);
+        aeu_mask &= ~(asserted & 0xff);
+        DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
 
-        REG_WR(bp, aeu_addr, bp->aeu_mask);
+        REG_WR(bp, aeu_addr, aeu_mask);
+        bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
 
+        DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
         bp->attn_state |= asserted;
+        DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
 
         if (asserted & ATTN_HARD_WIRED_MASK) {
                 if (asserted & ATTN_NIG_FOR_FUNC) {
@@ -2500,9 +2524,9 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 
         } /* if hardwired */
 
-        DP(NETIF_MSG_HW, "about to mask 0x%08x at IGU addr 0x%x\n",
-           asserted, BAR_IGU_INTMEM + igu_addr);
-        REG_WR(bp, BAR_IGU_INTMEM + igu_addr, asserted);
+        DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
+           asserted, hc_addr);
+        REG_WR(bp, hc_addr, asserted);
 
         /* now set back the mask */
         if (asserted & ATTN_NIG_FOR_FUNC)
@@ -2530,12 +2554,12 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
                 case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
                         /* Fan failure attention */
 
-                        /* The PHY reset is controled by GPIO 1 */
+                        /* The PHY reset is controlled by GPIO 1 */
                         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-                                       MISC_REGISTERS_GPIO_OUTPUT_LOW);
-                        /* Low power mode is controled by GPIO 2 */
+                                       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+                        /* Low power mode is controlled by GPIO 2 */
                         bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-                                       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                                       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
                         /* mark the failure */
                         bp->link_params.ext_phy_config &=
                                         ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
@@ -2699,10 +2723,11 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
         int index;
         u32 reg_addr;
         u32 val;
+        u32 aeu_mask;
 
         /* need to take HW lock because MCP or other port might also
            try to handle this event */
-        bnx2x_lock_alr(bp);
+        bnx2x_acquire_alr(bp);
 
         attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
         attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
@@ -2734,32 +2759,35 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
                                                 HW_PRTY_ASSERT_SET_1) ||
                             (attn.sig[2] & group_mask.sig[2] &
                                                 HW_PRTY_ASSERT_SET_2))
-                               BNX2X_ERR("FATAL HW block parity attention\n");
+                                BNX2X_ERR("FATAL HW block parity attention\n");
                 }
         }
 
-        bnx2x_unlock_alr(bp);
+        bnx2x_release_alr(bp);
 
-        reg_addr = (IGU_ADDR_ATTN_BITS_CLR + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
+        reg_addr = (HC_REG_COMMAND_REG + port*32 + COMMAND_REG_ATTN_BITS_CLR);
 
         val = ~deasserted;
-/*      DP(NETIF_MSG_INTR, "write 0x%08x to IGU addr 0x%x\n",
-           val, BAR_IGU_INTMEM + reg_addr); */
-        REG_WR(bp, BAR_IGU_INTMEM + reg_addr, val);
+        DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
+           val, reg_addr);
+        REG_WR(bp, reg_addr, val);
 
-        if (bp->aeu_mask & (deasserted & 0xff))
-                BNX2X_ERR("IGU BUG!\n");
         if (~bp->attn_state & deasserted)
-                BNX2X_ERR("IGU BUG!\n");
+                BNX2X_ERR("IGU ERROR\n");
 
         reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
                           MISC_REG_AEU_MASK_ATTN_FUNC_0;
 
-        DP(NETIF_MSG_HW, "aeu_mask %x\n", bp->aeu_mask);
-        bp->aeu_mask |= (deasserted & 0xff);
+        bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+        aeu_mask = REG_RD(bp, reg_addr);
+
+        DP(NETIF_MSG_HW, "aeu_mask %x  newly deasserted %x\n",
+           aeu_mask, deasserted);
+        aeu_mask |= (deasserted & 0xff);
+        DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
 
-        DP(NETIF_MSG_HW, "new mask %x\n", bp->aeu_mask);
-        REG_WR(bp, reg_addr, bp->aeu_mask);
+        REG_WR(bp, reg_addr, aeu_mask);
+        bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
 
         DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
         bp->attn_state &= ~deasserted;
@@ -2800,7 +2828,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 
         /* Return here if interrupt is disabled */
         if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-                DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
+                DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
                 return;
         }
 
@@ -2808,7 +2836,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 /*      if (status == 0)                                     */
 /*              BNX2X_ERR("spurious slowpath interrupt!\n"); */
 
-        DP(BNX2X_MSG_SP, "got a slowpath interrupt (updated %x)\n", status);
+        DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status);
 
         /* HW attentions */
         if (status & 0x1)
@@ -2838,7 +2866,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 
         /* Return here if interrupt is disabled */
         if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-                DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
+                DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
                 return IRQ_HANDLED;
         }
 
@@ -2876,11 +2904,11 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
                         /* underflow */ \
                         d_hi = m_hi - s_hi; \
                         if (d_hi > 0) { \
-                        /* we can 'loan' 1 */ \
+                                /* we can 'loan' 1 */ \
                                 d_hi--; \
                                 d_lo = m_lo + (UINT_MAX - s_lo) + 1; \
                         } else { \
-                        /* m_hi <= s_hi */ \
+                                /* m_hi <= s_hi */ \
                                 d_hi = 0; \
                                 d_lo = 0; \
                         } \
@@ -2890,7 +2918,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
                                 d_hi = 0; \
                                 d_lo = 0; \
                         } else { \
-                        /* m_hi >= s_hi */ \
+                                /* m_hi >= s_hi */ \
                                 d_hi = m_hi - s_hi; \
                                 d_lo = m_lo - s_lo; \
                         } \
@@ -2963,37 +2991,6 @@ static inline long bnx2x_hilo(u32 *hiref)
  * Init service functions
  */
 
-static void bnx2x_storm_stats_init(struct bnx2x *bp)
-{
-        int func = BP_FUNC(bp);
-
-        REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func), 1);
-        REG_WR(bp, BAR_XSTRORM_INTMEM +
-               XSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-        REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func), 1);
-        REG_WR(bp, BAR_TSTRORM_INTMEM +
-               TSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-        REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func), 0);
-        REG_WR(bp, BAR_CSTRORM_INTMEM +
-               CSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-        REG_WR(bp, BAR_XSTRORM_INTMEM +
-               XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
-               U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
-        REG_WR(bp, BAR_XSTRORM_INTMEM +
-               XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
-               U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
-
-        REG_WR(bp, BAR_TSTRORM_INTMEM +
-               TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
-               U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
-        REG_WR(bp, BAR_TSTRORM_INTMEM +
-               TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
-               U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
-}
-
 static void bnx2x_storm_stats_post(struct bnx2x *bp)
 {
         if (!bp->stats_pending) {
@@ -3032,6 +3029,8 @@ static void bnx2x_stats_init(struct bnx2x *bp)
         memset(&(bp->port.old_nig_stats), 0, sizeof(struct nig_stats));
         bp->port.old_nig_stats.brb_discard =
                         REG_RD(bp, NIG_REG_STAT0_BRB_DISCARD + port*0x38);
+        bp->port.old_nig_stats.brb_truncate =
+                        REG_RD(bp, NIG_REG_STAT0_BRB_TRUNCATE + port*0x38);
         REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT0 + port*0x50,
                     &(bp->port.old_nig_stats.egress_mac_pkt0_lo), 2);
         REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT1 + port*0x50,
@@ -3101,12 +3100,12 @@ static int bnx2x_stats_comp(struct bnx2x *bp)
 
         might_sleep();
         while (*stats_comp != DMAE_COMP_VAL) {
-                msleep(1);
                 if (!cnt) {
                         BNX2X_ERR("timeout waiting for stats finished\n");
                         break;
                 }
                 cnt--;
+                msleep(1);
         }
         return 1;
 }
@@ -3451,8 +3450,7 @@ static void bnx2x_bmac_stats_update(struct bnx2x *bp)
         UPDATE_STAT64(rx_stat_grovr, rx_stat_dot3statsframestoolong);
         UPDATE_STAT64(rx_stat_grfrg, rx_stat_etherstatsfragments);
         UPDATE_STAT64(rx_stat_grjbr, rx_stat_etherstatsjabbers);
-        UPDATE_STAT64(rx_stat_grxpf, rx_stat_bmac_xpf);
-        UPDATE_STAT64(rx_stat_grxcf, rx_stat_bmac_xcf);
+        UPDATE_STAT64(rx_stat_grxcf, rx_stat_maccontrolframesreceived);
         UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffstateentered);
         UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffpauseframesreceived);
         UPDATE_STAT64(tx_stat_gtxpf, tx_stat_outxoffsent);
@@ -3536,6 +3534,8 @@ static int bnx2x_hw_stats_update(struct bnx2x *bp)
 
         ADD_EXTEND_64(pstats->brb_drop_hi, pstats->brb_drop_lo,
                       new->brb_discard - old->brb_discard);
+        ADD_EXTEND_64(estats->brb_truncate_hi, estats->brb_truncate_lo,
+                      new->brb_truncate - old->brb_truncate);
 
         UPDATE_STAT64_NIG(egress_mac_pkt0,
                                         etherstatspkts1024octetsto1522octets);
@@ -3713,8 +3713,7 @@ static void bnx2x_net_stats_update(struct bnx2x *bp)
         nstats->rx_length_errors =
                                 estats->rx_stat_etherstatsundersizepkts_lo +
                                 estats->jabber_packets_received;
-        nstats->rx_over_errors = estats->brb_drop_lo +
-                                 estats->brb_truncate_discard;
+        nstats->rx_over_errors = estats->brb_drop_lo + estats->brb_truncate_lo;
         nstats->rx_crc_errors = estats->rx_stat_dot3statsfcserrors_lo;
         nstats->rx_frame_errors = estats->rx_stat_dot3statsalignmenterrors_lo;
         nstats->rx_fifo_errors = old_tclient->no_buff_discard;
@@ -3783,7 +3782,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
                              bp->fp->rx_comp_cons),
                        le16_to_cpu(*bp->fp->rx_cons_sb), nstats->rx_packets);
                 printk(KERN_DEBUG "  %s (Xoff events %u)  brb drops %u\n",
-                       netif_queue_stopped(bp->dev)? "Xoff" : "Xon",
+                       netif_queue_stopped(bp->dev) ? "Xoff" : "Xon",
                        estats->driver_xoff, estats->brb_drop_lo);
                 printk(KERN_DEBUG "tstats: checksum_discard %u  "
                         "packets_too_big_discard %u  no_buff_discard %u  "
@@ -3994,14 +3993,14 @@ static void bnx2x_zero_sb(struct bnx2x *bp, int sb_id)
 
         bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
                         USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
-                        sizeof(struct ustorm_def_status_block)/4);
+                        sizeof(struct ustorm_status_block)/4);
         bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
                         CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
-                        sizeof(struct cstorm_def_status_block)/4);
+                        sizeof(struct cstorm_status_block)/4);
 }
 
-static void bnx2x_init_sb(struct bnx2x *bp, int sb_id,
-                          struct host_status_block *sb, dma_addr_t mapping)
+static void bnx2x_init_sb(struct bnx2x *bp, struct host_status_block *sb,
+                          dma_addr_t mapping, int sb_id)
 {
         int port = BP_PORT(bp);
         int func = BP_FUNC(bp);
@@ -4077,7 +4076,6 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             atten_status_block);
         def_sb->atten_status_block.status_block_id = sb_id;
 
-        bp->def_att_idx = 0;
         bp->attn_state = 0;
 
         reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
@@ -4094,9 +4092,6 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                                reg_offset + 0xc + 0x10*index);
         }
 
-        bp->aeu_mask = REG_RD(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
-                                          MISC_REG_AEU_MASK_ATTN_FUNC_0));
-
         reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L :
                              HC_REG_ATTN_MSG0_ADDR_L);
 
@@ -4114,17 +4109,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             u_def_status_block);
         def_sb->u_def_status_block.status_block_id = sb_id;
 
-        bp->def_u_idx = 0;
-
         REG_WR(bp, BAR_USTRORM_INTMEM +
                USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
         REG_WR(bp, BAR_USTRORM_INTMEM +
                ((USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
                U64_HI(section));
-        REG_WR8(bp, BAR_USTRORM_INTMEM +  DEF_USB_FUNC_OFF +
+        REG_WR8(bp, BAR_USTRORM_INTMEM + DEF_USB_FUNC_OFF +
                 USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-        REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_HC_BTR_OFFSET(func),
-               BNX2X_BTR);
 
         for (index = 0; index < HC_USTORM_DEF_SB_NUM_INDICES; index++)
                 REG_WR16(bp, BAR_USTRORM_INTMEM +
@@ -4135,17 +4126,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             c_def_status_block);
         def_sb->c_def_status_block.status_block_id = sb_id;
 
-        bp->def_c_idx = 0;
-
         REG_WR(bp, BAR_CSTRORM_INTMEM +
                CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
         REG_WR(bp, BAR_CSTRORM_INTMEM +
                ((CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
                U64_HI(section));
-        REG_WR8(bp, BAR_CSTRORM_INTMEM +  DEF_CSB_FUNC_OFF +
+        REG_WR8(bp, BAR_CSTRORM_INTMEM + DEF_CSB_FUNC_OFF +
                 CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-        REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_OFFSET(func),
-               BNX2X_BTR);
 
         for (index = 0; index < HC_CSTORM_DEF_SB_NUM_INDICES; index++)
                 REG_WR16(bp, BAR_CSTRORM_INTMEM +
@@ -4156,17 +4143,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             t_def_status_block);
         def_sb->t_def_status_block.status_block_id = sb_id;
 
-        bp->def_t_idx = 0;
-
         REG_WR(bp, BAR_TSTRORM_INTMEM +
                TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
         REG_WR(bp, BAR_TSTRORM_INTMEM +
                ((TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
                U64_HI(section));
-        REG_WR8(bp, BAR_TSTRORM_INTMEM +  DEF_TSB_FUNC_OFF +
+        REG_WR8(bp, BAR_TSTRORM_INTMEM + DEF_TSB_FUNC_OFF +
                 TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-        REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(func),
-               BNX2X_BTR);
 
         for (index = 0; index < HC_TSTORM_DEF_SB_NUM_INDICES; index++)
                 REG_WR16(bp, BAR_TSTRORM_INTMEM +
@@ -4177,23 +4160,20 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             x_def_status_block);
         def_sb->x_def_status_block.status_block_id = sb_id;
 
-        bp->def_x_idx = 0;
-
         REG_WR(bp, BAR_XSTRORM_INTMEM +
                XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
         REG_WR(bp, BAR_XSTRORM_INTMEM +
                ((XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
                U64_HI(section));
-        REG_WR8(bp, BAR_XSTRORM_INTMEM +  DEF_XSB_FUNC_OFF +
+        REG_WR8(bp, BAR_XSTRORM_INTMEM + DEF_XSB_FUNC_OFF +
                 XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-        REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(func),
-               BNX2X_BTR);
 
         for (index = 0; index < HC_XSTORM_DEF_SB_NUM_INDICES; index++)
                 REG_WR16(bp, BAR_XSTRORM_INTMEM +
                          XSTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
 
         bp->stats_pending = 0;
+        bp->set_mac_pending = 0;
 
         bnx2x_ack_sb(bp, sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 }
@@ -4209,21 +4189,25 @@ static void bnx2x_update_coalesce(struct bnx2x *bp)
                 /* HC_INDEX_U_ETH_RX_CQ_CONS */
                 REG_WR8(bp, BAR_USTRORM_INTMEM +
                         USTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
-                                                   HC_INDEX_U_ETH_RX_CQ_CONS),
+                                                    U_SB_ETH_RX_CQ_INDEX),
                         bp->rx_ticks/12);
                 REG_WR16(bp, BAR_USTRORM_INTMEM +
                          USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
-                                                   HC_INDEX_U_ETH_RX_CQ_CONS),
+                                                     U_SB_ETH_RX_CQ_INDEX),
+                         bp->rx_ticks ? 0 : 1);
+                REG_WR16(bp, BAR_USTRORM_INTMEM +
+                         USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
+                                                     U_SB_ETH_RX_BD_INDEX),
                          bp->rx_ticks ? 0 : 1);
 
                 /* HC_INDEX_C_ETH_TX_CQ_CONS */
                 REG_WR8(bp, BAR_CSTRORM_INTMEM +
                         CSTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
-                                                   HC_INDEX_C_ETH_TX_CQ_CONS),
+                                                    C_SB_ETH_TX_CQ_INDEX),
                         bp->tx_ticks/12);
                 REG_WR16(bp, BAR_CSTRORM_INTMEM +
                          CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
-                                                   HC_INDEX_C_ETH_TX_CQ_CONS),
+                                                     C_SB_ETH_TX_CQ_INDEX),
                          bp->tx_ticks ? 0 : 1);
         }
 }
@@ -4256,7 +4240,9 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 static void bnx2x_init_rx_rings(struct bnx2x *bp)
 {
         int func = BP_FUNC(bp);
-        u16 ring_prod, cqe_ring_prod = 0;
+        int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
+                                              ETH_MAX_AGGREGATION_QUEUES_E1H;
+        u16 ring_prod, cqe_ring_prod;
         int i, j;
 
         bp->rx_buf_use_size = bp->dev->mtu;
@@ -4270,9 +4256,9 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
                    bp->dev->mtu + ETH_OVREHEAD);
 
                 for_each_queue(bp, j) {
-                        for (i = 0; i < ETH_MAX_AGGREGATION_QUEUES_E1H; i++) {
-                                struct bnx2x_fastpath *fp = &bp->fp[j];
+                        struct bnx2x_fastpath *fp = &bp->fp[j];
 
+                        for (i = 0; i < max_agg_queues; i++) {
                                 fp->tpa_pool[i].skb =
                                    netdev_alloc_skb(bp->dev, bp->rx_buf_size);
                                 if (!fp->tpa_pool[i].skb) {
@@ -4352,8 +4338,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
                                 BNX2X_ERR("disabling TPA for queue[%d]\n", j);
                                 /* Cleanup already allocated elements */
                                 bnx2x_free_rx_sge_range(bp, fp, ring_prod);
-                                bnx2x_free_tpa_pool(bp, fp,
-                                              ETH_MAX_AGGREGATION_QUEUES_E1H);
+                                bnx2x_free_tpa_pool(bp, fp, max_agg_queues);
                                 fp->disable_tpa = 1;
                                 ring_prod = 0;
                                 break;
@@ -4363,13 +4348,13 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
                 fp->rx_sge_prod = ring_prod;
 
                 /* Allocate BDs and initialize BD ring */
-                fp->rx_comp_cons = fp->rx_alloc_failed = 0;
+                fp->rx_comp_cons = 0;
                 cqe_ring_prod = ring_prod = 0;
                 for (i = 0; i < bp->rx_ring_size; i++) {
                         if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
                                 BNX2X_ERR("was only able to allocate "
                                           "%d rx skbs\n", i);
-                                fp->rx_alloc_failed++;
+                                bp->eth_stats.rx_skb_alloc_failed++;
                                 break;
                         }
                         ring_prod = NEXT_RX_IDX(ring_prod);
@@ -4497,7 +4482,7 @@ static void bnx2x_init_context(struct bnx2x *bp)
                 }
 
                 context->cstorm_st_context.sb_index_number =
-                                                HC_INDEX_C_ETH_TX_CQ_CONS;
+                                                C_SB_ETH_TX_CQ_INDEX;
                 context->cstorm_st_context.status_block_id = sb_id;
 
                 context->xstorm_ag_context.cdu_reserved =
@@ -4535,7 +4520,7 @@ static void bnx2x_set_client_config(struct bnx2x *bp)
         int i;
 
         tstorm_client.mtu = bp->dev->mtu + ETH_OVREHEAD;
-        tstorm_client.statistics_counter_id = 0;
+        tstorm_client.statistics_counter_id = BP_CL_ID(bp);
         tstorm_client.config_flags =
                                 TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
 #ifdef BCM_VLAN
@@ -4579,7 +4564,7 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
         int func = BP_FUNC(bp);
         int i;
 
-        DP(NETIF_MSG_RX_STATUS, "rx mode is %d\n", mode);
+        DP(NETIF_MSG_IFUP, "rx mode %d  mask 0x%x\n", mode, mask);
 
         switch (mode) {
         case BNX2X_RX_MODE_NONE: /* no Rx */
@@ -4617,13 +4602,35 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
                 bnx2x_set_client_config(bp);
 }
 
-static void bnx2x_init_internal(struct bnx2x *bp)
+static void bnx2x_init_internal_common(struct bnx2x *bp)
+{
+        int i;
+
+        /* Zero this manually as its initialization is
+           currently missing in the initTool */
+        for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
+                REG_WR(bp, BAR_USTRORM_INTMEM +
+                       USTORM_AGG_DATA_OFFSET + i * 4, 0);
+}
+
+static void bnx2x_init_internal_port(struct bnx2x *bp)
+{
+        int port = BP_PORT(bp);
+
+        REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+        REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+        REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+        REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+}
+
+static void bnx2x_init_internal_func(struct bnx2x *bp)
 {
         struct tstorm_eth_function_common_config tstorm_config = {0};
         struct stats_indication_flags stats_flags = {0};
         int port = BP_PORT(bp);
         int func = BP_FUNC(bp);
         int i;
+        u16 max_agg_size;
 
         if (is_multi(bp)) {
                 tstorm_config.config_flags = MULTI_FLAGS;
@@ -4636,31 +4643,53 @@ static void bnx2x_init_internal(struct bnx2x *bp)
                TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(func),
                (*(u32 *)&tstorm_config));
 
-/*      DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n",
-           (*(u32 *)&tstorm_config)); */
-
         bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
         bnx2x_set_storm_rx_mode(bp);
 
+        /* reset xstorm per client statistics */
+        for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++) {
+                REG_WR(bp, BAR_XSTRORM_INTMEM +
+                       XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, BP_CL_ID(bp)) +
+                       i*4, 0);
+        }
+        /* reset tstorm per client statistics */
+        for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++) {
+                REG_WR(bp, BAR_TSTRORM_INTMEM +
+                       TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, BP_CL_ID(bp)) +
+                       i*4, 0);
+        }
+
+        /* Init statistics related context */
         stats_flags.collect_eth = 1;
 
-        REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port),
+        REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func),
                ((u32 *)&stats_flags)[0]);
-        REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port) + 4,
+        REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func) + 4,
                ((u32 *)&stats_flags)[1]);
 
-        REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(port),
+        REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func),
                ((u32 *)&stats_flags)[0]);
-        REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(port) + 4,
+        REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func) + 4,
                ((u32 *)&stats_flags)[1]);
 
-        REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(port),
+        REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func),
                ((u32 *)&stats_flags)[0]);
-        REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(port) + 4,
+        REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func) + 4,
                ((u32 *)&stats_flags)[1]);
 
-/*      DP(NETIF_MSG_IFUP, "stats_flags: 0x%08x 0x%08x\n",
-           ((u32 *)&stats_flags)[0], ((u32 *)&stats_flags)[1]); */
+        REG_WR(bp, BAR_XSTRORM_INTMEM +
+               XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
+               U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
+        REG_WR(bp, BAR_XSTRORM_INTMEM +
+               XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
+               U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
+
+        REG_WR(bp, BAR_TSTRORM_INTMEM +
+               TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
+               U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
+        REG_WR(bp, BAR_TSTRORM_INTMEM +
+               TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
+               U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
 
         if (CHIP_IS_E1H(bp)) {
                 REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNCTION_MODE_OFFSET,
@@ -4676,15 +4705,12 @@ static void bnx2x_init_internal(struct bnx2x *bp)
                          bp->e1hov);
         }
 
-        /* Zero this manualy as its initialization is
-           currently missing in the initTool */
-        for (i = 0; i < USTORM_AGG_DATA_SIZE >> 2; i++)
-                REG_WR(bp, BAR_USTRORM_INTMEM +
-                       USTORM_AGG_DATA_OFFSET + 4*i, 0);
-
+        /* Init CQ ring mapping and aggregation size */
+        max_agg_size = min((u32)(bp->rx_buf_use_size +
+                                 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
+                           (u32)0xffff);
         for_each_queue(bp, i) {
                 struct bnx2x_fastpath *fp = &bp->fp[i];
-                u16 max_agg_size;
 
                 REG_WR(bp, BAR_USTRORM_INTMEM +
                        USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)),
@@ -4693,16 +4719,34 @@ static void bnx2x_init_internal(struct bnx2x *bp)
                        USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)) + 4,
                        U64_HI(fp->rx_comp_mapping));
 
-                max_agg_size = min((u32)(bp->rx_buf_use_size +
-                                         8*BCM_PAGE_SIZE*PAGES_PER_SGE),
-                                   (u32)0xffff);
                 REG_WR16(bp, BAR_USTRORM_INTMEM +
                          USTORM_MAX_AGG_SIZE_OFFSET(port, FP_CL_ID(fp)),
                          max_agg_size);
         }
 }
 
-static void bnx2x_nic_init(struct bnx2x *bp)
+static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
+{
+        switch (load_code) {
+        case FW_MSG_CODE_DRV_LOAD_COMMON:
+                bnx2x_init_internal_common(bp);
+                /* no break */
+
+        case FW_MSG_CODE_DRV_LOAD_PORT:
+                bnx2x_init_internal_port(bp);
+                /* no break */
+
+        case FW_MSG_CODE_DRV_LOAD_FUNCTION:
+                bnx2x_init_internal_func(bp);
+                break;
+
+        default:
+                BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
+                break;
+        }
+}
+
+static void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
 {
         int i;
 
@@ -4717,19 +4761,20 @@ static void bnx2x_nic_init(struct bnx2x *bp)
                 DP(NETIF_MSG_IFUP,
                    "bnx2x_init_sb(%p,%p) index %d  cl_id %d  sb %d\n",
                    bp, fp->status_blk, i, FP_CL_ID(fp), FP_SB_ID(fp));
-                bnx2x_init_sb(bp, FP_SB_ID(fp), fp->status_blk,
-                              fp->status_blk_mapping);
+                bnx2x_init_sb(bp, fp->status_blk, fp->status_blk_mapping,
+                              FP_SB_ID(fp));
+                bnx2x_update_fpsb_idx(fp);
         }
 
-        bnx2x_init_def_sb(bp, bp->def_status_blk,
-                          bp->def_status_blk_mapping, DEF_SB_ID);
+        bnx2x_init_def_sb(bp, bp->def_status_blk, bp->def_status_blk_mapping,
+                          DEF_SB_ID);
+        bnx2x_update_dsb_idx(bp);
         bnx2x_update_coalesce(bp);
         bnx2x_init_rx_rings(bp);
         bnx2x_init_tx_ring(bp);
         bnx2x_init_sp_ring(bp);
         bnx2x_init_context(bp);
-        bnx2x_init_internal(bp);
-        bnx2x_storm_stats_init(bp);
+        bnx2x_init_internal(bp, load_code);
         bnx2x_init_ind_table(bp);
         bnx2x_int_enable(bp);
 }
@@ -4878,7 +4923,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
         REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
         REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
         REG_WR(bp, CFC_REG_DEBUG0, 0x1);
-        NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x0);
+        REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
 
         /*  Write 0 to parser credits for CFC search request */
         REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
@@ -4933,7 +4978,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
         REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
         REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
         REG_WR(bp, CFC_REG_DEBUG0, 0x1);
-        NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x0);
+        REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
 
         /* Write 0 to parser credits for CFC search request */
         REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
@@ -5000,7 +5045,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
         REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff);
         REG_WR(bp, TCM_REG_PRS_IFEN, 0x1);
         REG_WR(bp, CFC_REG_DEBUG0, 0x0);
-        NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x1);
+        REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1);
 
         DP(NETIF_MSG_HW, "done\n");
 
@@ -5089,11 +5134,6 @@ static int bnx2x_init_common(struct bnx2x *bp)
         REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
 #endif
 
-#ifndef BCM_ISCSI
-                /* set NIC mode */
-                REG_WR(bp, PRS_REG_NIC_MODE, 1);
-#endif
-
         REG_WR(bp, PXP2_REG_RQ_CDU_P_SIZE, 2);
 #ifdef BCM_ISCSI
         REG_WR(bp, PXP2_REG_RQ_TM_P_SIZE, 5);
@@ -5163,6 +5203,8 @@ static int bnx2x_init_common(struct bnx2x *bp)
         }
 
         bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+        /* set NIC mode */
+        REG_WR(bp, PRS_REG_NIC_MODE, 1);
         if (CHIP_IS_E1H(bp))
                 REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
 
@@ -5333,6 +5375,13 @@ static int bnx2x_init_common(struct bnx2x *bp)
                        ((u32 *)&tmp)[1]);
         }
 
+        if (!BP_NOMCP(bp)) {
+                bnx2x_acquire_phy_lock(bp);
+                bnx2x_common_init_phy(bp, bp->common.shmem_base);
+                bnx2x_release_phy_lock(bp);
+        } else
+                BNX2X_ERR("Bootcode is missing - can not initialize link\n");
+
         return 0;
 }
 
@@ -5638,18 +5687,23 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
         int func = BP_FUNC(bp);
         u32 seq = ++bp->fw_seq;
         u32 rc = 0;
+        u32 cnt = 1;
+        u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
 
         SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
         DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
 
-        /* let the FW do it's magic ... */
-        msleep(100); /* TBD */
+        do {
+                /* let the FW do it's magic ... */
+                msleep(delay);
 
-        if (CHIP_REV_IS_SLOW(bp))
-                msleep(900);
+                rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
 
-        rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
-        DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq);
+                /* Give the FW up to 2 second (200*10ms) */
+        } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 200));
+
+        DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
+           cnt*delay, rc, seq);
 
         /* is this a reply to our command? */
         if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
@@ -5713,6 +5767,7 @@ static void bnx2x_free_mem(struct bnx2x *bp)
                                NUM_RCQ_BD);
 
                 /* SGE ring */
+                BNX2X_FREE(bnx2x_fp(bp, i, rx_page_ring));
                 BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_sge_ring),
                                bnx2x_fp(bp, i, rx_sge_mapping),
                                BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
@@ -5890,7 +5945,8 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp)
                         dev_kfree_skb(skb);
                 }
                 if (!fp->disable_tpa)
-                        bnx2x_free_tpa_pool(bp, fp,
+                        bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
+                                            ETH_MAX_AGGREGATION_QUEUES_E1 :
                                             ETH_MAX_AGGREGATION_QUEUES_E1H);
         }
 }
@@ -5976,8 +6032,8 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
                                  bnx2x_msix_fp_int, 0,
                                  bp->dev->name, &bp->fp[i]);
                 if (rc) {
-                        BNX2X_ERR("request fp #%d irq failed  rc %d\n",
-                                  i + offset, rc);
+                        BNX2X_ERR("request fp #%d irq failed  rc -%d\n",
+                                  i + offset, -rc);
                         bnx2x_free_msix_irqs(bp);
                         return -EBUSY;
                 }
@@ -6004,7 +6060,7 @@ static int bnx2x_req_irq(struct bnx2x *bp)
  * Init service functions
  */
 
-static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
+static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set)
 {
         struct mac_configuration_cmd *config = bnx2x_sp(bp, mac_config);
         int port = BP_PORT(bp);
@@ -6026,11 +6082,15 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
         config->config_table[0].cam_entry.lsb_mac_addr =
                                         swab16(*(u16 *)&bp->dev->dev_addr[4]);
         config->config_table[0].cam_entry.flags = cpu_to_le16(port);
-        config->config_table[0].target_table_entry.flags = 0;
+        if (set)
+                config->config_table[0].target_table_entry.flags = 0;
+        else
+                CAM_INVALIDATE(config->config_table[0]);
         config->config_table[0].target_table_entry.client_id = 0;
         config->config_table[0].target_table_entry.vlan_id = 0;
 
-        DP(NETIF_MSG_IFUP, "setting MAC (%04x:%04x:%04x)\n",
+        DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)\n",
+           (set ? "setting" : "clearing"),
            config->config_table[0].cam_entry.msb_mac_addr,
            config->config_table[0].cam_entry.middle_mac_addr,
            config->config_table[0].cam_entry.lsb_mac_addr);
@@ -6040,8 +6100,11 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
         config->config_table[1].cam_entry.middle_mac_addr = 0xffff;
         config->config_table[1].cam_entry.lsb_mac_addr = 0xffff;
         config->config_table[1].cam_entry.flags = cpu_to_le16(port);
-        config->config_table[1].target_table_entry.flags =
+        if (set)
+                config->config_table[1].target_table_entry.flags =
                                 TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
+        else
+                CAM_INVALIDATE(config->config_table[1]);
         config->config_table[1].target_table_entry.client_id = 0;
         config->config_table[1].target_table_entry.vlan_id = 0;
 
@@ -6050,12 +6113,12 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
                       U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
 }
 
-static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp)
+static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp, int set)
 {
         struct mac_configuration_cmd_e1h *config =
                 (struct mac_configuration_cmd_e1h *)bnx2x_sp(bp, mac_config);
 
-        if (bp->state != BNX2X_STATE_OPEN) {
+        if (set && (bp->state != BNX2X_STATE_OPEN)) {
                 DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
                 return;
         }
@@ -6079,9 +6142,14 @@ static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp)
         config->config_table[0].client_id = BP_L_ID(bp);
         config->config_table[0].vlan_id = 0;
         config->config_table[0].e1hov_id = cpu_to_le16(bp->e1hov);
-        config->config_table[0].flags = BP_PORT(bp);
+        if (set)
+                config->config_table[0].flags = BP_PORT(bp);
+        else
+                config->config_table[0].flags =
+                                MAC_CONFIGURATION_ENTRY_E1H_ACTION_TYPE;
 
-        DP(NETIF_MSG_IFUP, "setting MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+        DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+           (set ? "setting" : "clearing"),
            config->config_table[0].msb_mac_addr,
            config->config_table[0].middle_mac_addr,
            config->config_table[0].lsb_mac_addr, bp->e1hov, BP_L_ID(bp));
@@ -6106,13 +6174,13 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
                         bnx2x_rx_int(bp->fp, 10);
                         /* if index is different from 0
                          * the reply for some commands will
-                         * be on the none default queue
+                         * be on the non default queue
                          */
                         if (idx)
                                 bnx2x_rx_int(&bp->fp[idx], 10);
                 }
-                mb(); /* state is changed by bnx2x_sp_event() */
 
+                mb(); /* state is changed by bnx2x_sp_event() */
                 if (*state_p == state)
                         return 0;
 
@@ -6167,7 +6235,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
         u32 load_code;
         int i, rc;
-
 #ifdef BNX2X_STOP_ON_ERROR
         if (unlikely(bp->panic))
                 return -EPERM;
@@ -6183,22 +6250,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
         if (!BP_NOMCP(bp)) {
                 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
                 if (!load_code) {
-                        BNX2X_ERR("MCP response failure, unloading\n");
+                        BNX2X_ERR("MCP response failure, aborting\n");
                         return -EBUSY;
                 }
                 if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
                         return -EBUSY; /* other port in diagnostic mode */
 
         } else {
+                int port = BP_PORT(bp);
+
                 DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
                    load_count[0], load_count[1], load_count[2]);
                 load_count[0]++;
-                load_count[1 + BP_PORT(bp)]++;
+                load_count[1 + port]++;
                 DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
                    load_count[0], load_count[1], load_count[2]);
                 if (load_count[0] == 1)
                         load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
-                else if (load_count[1 + BP_PORT(bp)] == 1)
+                else if (load_count[1 + port] == 1)
                         load_code = FW_MSG_CODE_DRV_LOAD_PORT;
                 else
                         load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
@@ -6247,9 +6316,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 bnx2x_fp(bp, i, disable_tpa) =
                                         ((bp->flags & TPA_ENABLE_FLAG) == 0);
 
-        /* Disable interrupt handling until HW is initialized */
-        atomic_set(&bp->intr_sem, 1);
-
         if (bp->flags & USING_MSIX_FLAG) {
                 rc = bnx2x_req_msix_irqs(bp);
                 if (rc) {
@@ -6276,17 +6342,14 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 goto load_error;
         }
 
-        /* Enable interrupt handling */
-        atomic_set(&bp->intr_sem, 0);
-
         /* Setup NIC internals and enable interrupts */
-        bnx2x_nic_init(bp);
+        bnx2x_nic_init(bp, load_code);
 
         /* Send LOAD_DONE command to MCP */
         if (!BP_NOMCP(bp)) {
                 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
                 if (!load_code) {
-                        BNX2X_ERR("MCP response failure, unloading\n");
+                        BNX2X_ERR("MCP response failure, aborting\n");
                         rc = -EBUSY;
                         goto load_int_disable;
                 }
@@ -6301,11 +6364,12 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
         for_each_queue(bp, i)
                 napi_enable(&bnx2x_fp(bp, i, napi));
 
+        /* Enable interrupt handling */
+        atomic_set(&bp->intr_sem, 0);
+
         rc = bnx2x_setup_leading(bp);
         if (rc) {
-#ifdef BNX2X_STOP_ON_ERROR
-                bp->panic = 1;
-#endif
+                BNX2X_ERR("Setup leading failed!\n");
                 goto load_stop_netif;
         }
 
@@ -6323,9 +6387,9 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 }
 
         if (CHIP_IS_E1(bp))
-                bnx2x_set_mac_addr_e1(bp);
+                bnx2x_set_mac_addr_e1(bp, 1);
         else
-                bnx2x_set_mac_addr_e1h(bp);
+                bnx2x_set_mac_addr_e1h(bp, 1);
 
         if (bp->port.pmf)
                 bnx2x_initial_phy_init(bp);
@@ -6339,7 +6403,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                 break;
 
         case LOAD_OPEN:
-                /* IRQ is only requested from bnx2x_open */
                 netif_start_queue(bp->dev);
                 bnx2x_set_rx_mode(bp->dev);
                 if (bp->flags & USING_MSIX_FLAG)
@@ -6378,8 +6441,7 @@ load_int_disable:
         /* Free SKBs, SGEs, TPA pool and driver internals */
         bnx2x_free_skbs(bp);
         for_each_queue(bp, i)
-                bnx2x_free_rx_sge_range(bp, bp->fp + i,
-                                        RX_SGE_CNT*NUM_RX_SGE_PAGES);
+                bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 load_error:
         bnx2x_free_mem(bp);
 
@@ -6411,7 +6473,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
         return rc;
 }
 
-static void bnx2x_stop_leading(struct bnx2x *bp)
+static int bnx2x_stop_leading(struct bnx2x *bp)
 {
         u16 dsb_sp_prod_idx;
         /* if the other port is handling traffic,
@@ -6429,7 +6491,7 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
         rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, 0,
                                &(bp->fp[0].state), 1);
         if (rc) /* timeout */
-                return;
+                return rc;
 
         dsb_sp_prod_idx = *bp->dsb_sp_prod;
 
@@ -6441,20 +6503,24 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
            so there is not much to do if this times out
          */
         while (dsb_sp_prod_idx == *bp->dsb_sp_prod) {
-                msleep(1);
                 if (!cnt) {
                         DP(NETIF_MSG_IFDOWN, "timeout waiting for port del "
                            "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n",
                            *bp->dsb_sp_prod, dsb_sp_prod_idx);
 #ifdef BNX2X_STOP_ON_ERROR
                         bnx2x_panic();
+#else
+                        rc = -EBUSY;
 #endif
                         break;
                 }
                 cnt--;
+                msleep(1);
         }
         bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
         bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
+
+        return rc;
 }
 
 static void bnx2x_reset_func(struct bnx2x *bp)
@@ -6496,7 +6562,7 @@ static void bnx2x_reset_port(struct bnx2x *bp)
         val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
         if (val)
                 DP(NETIF_MSG_IFDOWN,
-                   "BRB1 is not empty  %d blooks are occupied\n", val);
+                   "BRB1 is not empty  %d blocks are occupied\n", val);
 
         /* TODO: Close Doorbell port? */
 }
@@ -6536,11 +6602,12 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
         }
 }
 
-/* msut be called with rtnl_lock */
+/* must be called with rtnl_lock */
 static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 {
+        int port = BP_PORT(bp);
         u32 reset_code = 0;
-        int i, cnt;
+        int i, cnt, rc;
 
         bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
 
@@ -6557,22 +6624,17 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
                  (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
         bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-        /* Wait until all fast path tasks complete */
+        /* Wait until tx fast path tasks complete */
         for_each_queue(bp, i) {
                 struct bnx2x_fastpath *fp = &bp->fp[i];
 
-#ifdef BNX2X_STOP_ON_ERROR
-#ifdef __powerpc64__
-                DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n",
-#else
-                DP(NETIF_MSG_IFDOWN, "fp->tpa_queue_used = 0x%llx\n",
-#endif
-                   fp->tpa_queue_used);
-#endif
                 cnt = 1000;
                 smp_rmb();
-                while (bnx2x_has_work(fp)) {
-                        msleep(1);
+                while (BNX2X_HAS_TX_WORK(fp)) {
+
+                        if (!netif_running(bp->dev))
+                                bnx2x_tx_int(fp, 1000);
+
                         if (!cnt) {
                                 BNX2X_ERR("timeout waiting for queue[%d]\n",
                                           i);
@@ -6584,14 +6646,13 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 #endif
                         }
                         cnt--;
+                        msleep(1);
                         smp_rmb();
                 }
         }
 
-        /* Wait until all slow path tasks complete */
-        cnt = 1000;
-        while ((bp->spq_left != MAX_SPQ_PENDING) && cnt--)
-                msleep(1);
+        /* Give HW time to discard old tx messages */
+        msleep(1);
 
         for_each_queue(bp, i)
                 napi_disable(&bnx2x_fp(bp, i, napi));
@@ -6601,52 +6662,79 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
         /* Release IRQs */
         bnx2x_free_irq(bp);
 
-        if (bp->flags & NO_WOL_FLAG)
+        if (unload_mode == UNLOAD_NORMAL)
+                reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+        else if (bp->flags & NO_WOL_FLAG) {
                 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
+                if (CHIP_IS_E1H(bp))
+                        REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
 
-        else if (bp->wol) {
-                u32 emac_base = BP_PORT(bp) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+        } else if (bp->wol) {
+                u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
                 u8 *mac_addr = bp->dev->dev_addr;
                 u32 val;
-
                 /* The mac address is written to entries 1-4 to
                    preserve entry 0 which is used by the PMF */
+                u8 entry = (BP_E1HVN(bp) + 1)*8;
+
                 val = (mac_addr[0] << 8) | mac_addr[1];
-                EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8, val);
+                EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
 
                 val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
                       (mac_addr[4] << 8) | mac_addr[5];
-                EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8 + 4,
-                        val);
+                EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
 
                 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
 
         } else
                 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
 
+        if (CHIP_IS_E1(bp)) {
+                struct mac_configuration_cmd *config =
+                                                bnx2x_sp(bp, mcast_config);
+
+                bnx2x_set_mac_addr_e1(bp, 0);
+
+                for (i = 0; i < config->hdr.length_6b; i++)
+                        CAM_INVALIDATE(config->config_table[i]);
+
+                config->hdr.length_6b = i;
+                if (CHIP_REV_IS_SLOW(bp))
+                        config->hdr.offset = BNX2X_MAX_EMUL_MULTI*(1 + port);
+                else
+                        config->hdr.offset = BNX2X_MAX_MULTICAST*(1 + port);
+                config->hdr.client_id = BP_CL_ID(bp);
+                config->hdr.reserved1 = 0;
+
+                bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
+                              U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
+                              U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0);
+
+        } else { /* E1H */
+                bnx2x_set_mac_addr_e1h(bp, 0);
+
+                for (i = 0; i < MC_HASH_SIZE; i++)
+                        REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
+        }
+
+        if (CHIP_IS_E1H(bp))
+                REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
+
         /* Close multi and leading connections
            Completions for ramrods are collected in a synchronous way */
         for_each_nondefault_queue(bp, i)
                 if (bnx2x_stop_multi(bp, i))
                         goto unload_error;
 
-        if (CHIP_IS_E1H(bp))
-                REG_WR(bp, NIG_REG_LLH0_FUNC_EN + BP_PORT(bp)*8, 0);
-
-        bnx2x_stop_leading(bp);
-#ifdef BNX2X_STOP_ON_ERROR
-        /* If ramrod completion timed out - break here! */
-        if (bp->panic) {
+        rc = bnx2x_stop_leading(bp);
+        if (rc) {
                 BNX2X_ERR("Stop leading failed!\n");
+#ifdef BNX2X_STOP_ON_ERROR
                 return -EBUSY;
-        }
+#else
+                goto unload_error;
 #endif
-
-        if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) ||
-            (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) {
-                DP(NETIF_MSG_IFDOWN, "failed to close leading properly!  "
-                   "state 0x%x  fp[0].state 0x%x\n",
-                   bp->state, bp->fp[0].state);
         }
 
 unload_error:
@@ -6656,12 +6744,12 @@ unload_error:
                 DP(NETIF_MSG_IFDOWN, "NO MCP load counts      %d, %d, %d\n",
                    load_count[0], load_count[1], load_count[2]);
                 load_count[0]--;
-                load_count[1 + BP_PORT(bp)]--;
+                load_count[1 + port]--;
                 DP(NETIF_MSG_IFDOWN, "NO MCP new load counts  %d, %d, %d\n",
                    load_count[0], load_count[1], load_count[2]);
                 if (load_count[0] == 0)
                         reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
-                else if (load_count[1 + BP_PORT(bp)] == 0)
+                else if (load_count[1 + port] == 0)
                         reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
                 else
                         reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
@@ -6681,8 +6769,7 @@ unload_error:
         /* Free SKBs, SGEs, TPA pool and driver internals */
         bnx2x_free_skbs(bp);
         for_each_queue(bp, i)
-                bnx2x_free_rx_sge_range(bp, bp->fp + i,
-                                        RX_SGE_CNT*NUM_RX_SGE_PAGES);
+                bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
         bnx2x_free_mem(bp);
 
         bp->state = BNX2X_STATE_CLOSED;
@@ -6733,56 +6820,93 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
                 /* Check if it is the UNDI driver
                  * UNDI driver initializes CID offset for normal bell to 0x7
                  */
+                bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
                 val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
                 if (val == 0x7) {
                         u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
-                        /* save our func and fw_seq */
+                        /* save our func */
                         int func = BP_FUNC(bp);
-                        u16 fw_seq = bp->fw_seq;
+                        u32 swap_en;
+                        u32 swap_val;
 
                         BNX2X_DEV_INFO("UNDI is active! reset device\n");
 
                         /* try unload UNDI on port 0 */
                         bp->func = 0;
-                        bp->fw_seq = (SHMEM_RD(bp,
-                                             func_mb[bp->func].drv_mb_header) &
-                                      DRV_MSG_SEQ_NUMBER_MASK);
-
+                        bp->fw_seq =
+                               (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+                                DRV_MSG_SEQ_NUMBER_MASK);
                         reset_code = bnx2x_fw_command(bp, reset_code);
-                        bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
 
                         /* if UNDI is loaded on the other port */
                         if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
 
+                                /* send "DONE" for previous unload */
+                                bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+
+                                /* unload UNDI on port 1 */
                                 bp->func = 1;
-                                bp->fw_seq = (SHMEM_RD(bp,
-                                             func_mb[bp->func].drv_mb_header) &
-                                              DRV_MSG_SEQ_NUMBER_MASK);
-
-                                bnx2x_fw_command(bp,
-                                             DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS);
-                                bnx2x_fw_command(bp,
-                                                 DRV_MSG_CODE_UNLOAD_DONE);
-
-                                /* restore our func and fw_seq */
-                                bp->func = func;
-                                bp->fw_seq = fw_seq;
+                                bp->fw_seq =
+                               (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+                                        DRV_MSG_SEQ_NUMBER_MASK);
+                                reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+                                bnx2x_fw_command(bp, reset_code);
                         }
 
+                        REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 :
+                                    HC_REG_CONFIG_0), 0x1000);
+
+                        /* close input traffic and wait for it */
+                        /* Do not rcv packets to BRB */
+                        REG_WR(bp,
+                              (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_DRV_MASK :
+                                             NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
+                        /* Do not direct rcv packets that are not for MCP to
+                         * the BRB */
+                        REG_WR(bp,
+                               (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_NOT_MCP :
+                                              NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
+                        /* clear AEU */
+                        REG_WR(bp,
+                             (BP_PORT(bp) ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+                                            MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
+                        msleep(10);
+
+                        /* save NIG port swap info */
+                        swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
+                        swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
                         /* reset device */
                         REG_WR(bp,
                                GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
-                               0xd3ffff7f);
+                               0xd3ffffff);
                         REG_WR(bp,
                                GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
                                0x1403);
+                        /* take the NIG out of reset and restore swap values */
+                        REG_WR(bp,
+                               GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+                               MISC_REGISTERS_RESET_REG_1_RST_NIG);
+                        REG_WR(bp, NIG_REG_PORT_SWAP, swap_val);
+                        REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
+
+                        /* send unload done to the MCP */
+                        bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+
+                        /* restore our func and fw_seq */
+                        bp->func = func;
+                        bp->fw_seq =
+                               (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+                                DRV_MSG_SEQ_NUMBER_MASK);
                 }
+                bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
         }
 }
 
 static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 {
         u32 val, val2, val3, val4, id;
+        u16 pmc;
 
         /* Get the chip revision id and number. */
         /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
@@ -6840,8 +6964,16 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
                 BNX2X_ERR("This driver needs bc_ver %X but found %X,"
                           " please upgrade BC\n", BNX2X_BC_VER, val);
         }
-        BNX2X_DEV_INFO("%sWoL Capable\n",
-                       (bp->flags & NO_WOL_FLAG)? "Not " : "");
+
+        if (BP_E1HVN(bp) == 0) {
+                pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
+                bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
+        } else {
+                /* no WOL capability for E1HVN != 0 */
+                bp->flags |= NO_WOL_FLAG;
+        }
+        BNX2X_DEV_INFO("%sWoL capable\n",
+                       (bp->flags & NO_WOL_FLAG) ? "Not " : "");
 
         val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
         val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
@@ -7274,9 +7406,8 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
                 bp->mf_config =
                         SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 
-                val =
-                   (SHMEM_RD(bp, mf_cfg.func_mf_config[func].e1hov_tag) &
-                    FUNC_MF_CFG_E1HOV_TAG_MASK);
+                val = (SHMEM_RD(bp, mf_cfg.func_mf_config[func].e1hov_tag) &
+                       FUNC_MF_CFG_E1HOV_TAG_MASK);
                 if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
 
                         bp->e1hov = val;
@@ -7324,7 +7455,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 
         if (BP_NOMCP(bp)) {
                 /* only supposed to happen on emulation/FPGA */
-                BNX2X_ERR("warning rendom MAC workaround active\n");
+                BNX2X_ERR("warning random MAC workaround active\n");
                 random_ether_addr(bp->dev->dev_addr);
                 memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
         }
@@ -7337,8 +7468,8 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
         int func = BP_FUNC(bp);
         int rc;
 
-        if (nomcp)
-                bp->flags |= NO_MCP_FLAG;
+        /* Disable interrupt handling until HW is initialized */
+        atomic_set(&bp->intr_sem, 1);
 
         mutex_init(&bp->port.phy_mutex);
 
@@ -7377,8 +7508,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
         bp->tx_ticks = 50;
         bp->rx_ticks = 25;
 
-        bp->stats_ticks = 1000000 & 0xffff00;
-
         bp->timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
         bp->current_interval = (poll ? poll : bp->timer_interval);
 
@@ -7628,25 +7757,25 @@ static void bnx2x_get_drvinfo(struct net_device *dev,
                               struct ethtool_drvinfo *info)
 {
         struct bnx2x *bp = netdev_priv(dev);
-        char phy_fw_ver[PHY_FW_VER_LEN];
+        u8 phy_fw_ver[PHY_FW_VER_LEN];
 
         strcpy(info->driver, DRV_MODULE_NAME);
         strcpy(info->version, DRV_MODULE_VERSION);
 
         phy_fw_ver[0] = '\0';
         if (bp->port.pmf) {
-                bnx2x_phy_hw_lock(bp);
+                bnx2x_acquire_phy_lock(bp);
                 bnx2x_get_ext_phy_fw_version(&bp->link_params,
                                              (bp->state != BNX2X_STATE_CLOSED),
                                              phy_fw_ver, PHY_FW_VER_LEN);
-                bnx2x_phy_hw_unlock(bp);
+                bnx2x_release_phy_lock(bp);
         }
 
-        snprintf(info->fw_version, 32, "%d.%d.%d:%d BC:%x%s%s",
-                 BCM_5710_FW_MAJOR_VERSION, BCM_5710_FW_MINOR_VERSION,
-                 BCM_5710_FW_REVISION_VERSION,
-                 BCM_5710_FW_COMPILE_FLAGS, bp->common.bc_ver,
-                 ((phy_fw_ver[0] != '\0')? " PHY:":""), phy_fw_ver);
+        snprintf(info->fw_version, 32, "BC:%d.%d.%d%s%s",
+                 (bp->common.bc_ver & 0xff0000) >> 16,
+                 (bp->common.bc_ver & 0xff00) >> 8,
+                 (bp->common.bc_ver & 0xff),
+                 ((phy_fw_ver[0] != '\0') ? " PHY:" : ""), phy_fw_ver);
         strcpy(info->bus_info, pci_name(bp->pdev));
         info->n_stats = BNX2X_NUM_STATS;
         info->testinfo_len = BNX2X_NUM_TESTS;
@@ -8097,7 +8226,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
         if (eeprom->magic == 0x00504859)
                 if (bp->port.pmf) {
 
-                        bnx2x_phy_hw_lock(bp);
+                        bnx2x_acquire_phy_lock(bp);
                         rc = bnx2x_flash_download(bp, BP_PORT(bp),
                                              bp->link_params.ext_phy_config,
                                              (bp->state != BNX2X_STATE_CLOSED),
@@ -8109,7 +8238,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
                                 rc |= bnx2x_phy_init(&bp->link_params,
                                                      &bp->link_vars);
                         }
-                        bnx2x_phy_hw_unlock(bp);
+                        bnx2x_release_phy_lock(bp);
 
                 } else /* Only the PMF can access the PHY */
                         return -EINVAL;
@@ -8128,7 +8257,6 @@ static int bnx2x_get_coalesce(struct net_device *dev,
 
         coal->rx_coalesce_usecs = bp->rx_ticks;
         coal->tx_coalesce_usecs = bp->tx_ticks;
-        coal->stats_block_coalesce_usecs = bp->stats_ticks;
 
         return 0;
 }
@@ -8146,44 +8274,12 @@ static int bnx2x_set_coalesce(struct net_device *dev,
         if (bp->tx_ticks > 0x3000)
                 bp->tx_ticks = 0x3000;
 
-        bp->stats_ticks = coal->stats_block_coalesce_usecs;
-        if (bp->stats_ticks > 0xffff00)
-                bp->stats_ticks = 0xffff00;
-        bp->stats_ticks &= 0xffff00;
-
         if (netif_running(dev))
                 bnx2x_update_coalesce(bp);
 
         return 0;
 }
 
-static int bnx2x_set_flags(struct net_device *dev, u32 data)
-{
-        struct bnx2x *bp = netdev_priv(dev);
-        int changed = 0;
-        int rc = 0;
-
-        if (data & ETH_FLAG_LRO) {
-                if (!(dev->features & NETIF_F_LRO)) {
-                        dev->features |= NETIF_F_LRO;
-                        bp->flags |= TPA_ENABLE_FLAG;
-                        changed = 1;
-                }
-
-        } else if (dev->features & NETIF_F_LRO) {
-                dev->features &= ~NETIF_F_LRO;
-                bp->flags &= ~TPA_ENABLE_FLAG;
-                changed = 1;
-        }
-
-        if (changed && netif_running(dev)) {
-                bnx2x_nic_unload(bp, UNLOAD_NORMAL);
-                rc = bnx2x_nic_load(bp, LOAD_NORMAL);
-        }
-
-        return rc;
-}
-
 static void bnx2x_get_ringparam(struct net_device *dev,
                                 struct ethtool_ringparam *ering)
 {
@@ -8266,7 +8362,7 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 
         if (epause->autoneg) {
                 if (!(bp->port.supported & SUPPORTED_Autoneg)) {
-                        DP(NETIF_MSG_LINK, "Autoneg not supported\n");
+                        DP(NETIF_MSG_LINK, "autoneg not supported\n");
                         return -EINVAL;
                 }
 
@@ -8285,6 +8381,34 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
         return 0;
 }
 
+static int bnx2x_set_flags(struct net_device *dev, u32 data)
+{
+        struct bnx2x *bp = netdev_priv(dev);
+        int changed = 0;
+        int rc = 0;
+
+        /* TPA requires Rx CSUM offloading */
+        if ((data & ETH_FLAG_LRO) && bp->rx_csum) {
+                if (!(dev->features & NETIF_F_LRO)) {
+                        dev->features |= NETIF_F_LRO;
+                        bp->flags |= TPA_ENABLE_FLAG;
+                        changed = 1;
+                }
+
+        } else if (dev->features & NETIF_F_LRO) {
+                dev->features &= ~NETIF_F_LRO;
+                bp->flags &= ~TPA_ENABLE_FLAG;
+                changed = 1;
+        }
+
+        if (changed && netif_running(dev)) {
+                bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+                rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+        }
+
+        return rc;
+}
+
 static u32 bnx2x_get_rx_csum(struct net_device *dev)
 {
         struct bnx2x *bp = netdev_priv(dev);
@@ -8295,9 +8419,19 @@ static u32 bnx2x_get_rx_csum(struct net_device *dev)
 static int bnx2x_set_rx_csum(struct net_device *dev, u32 data)
 {
         struct bnx2x *bp = netdev_priv(dev);
+        int rc = 0;
 
         bp->rx_csum = data;
-        return 0;
+
+        /* Disable TPA, when Rx CSUM is disabled. Otherwise all
+           TPA'ed packets will be discarded due to wrong TCP CSUM */
+        if (!data) {
+                u32 flags = ethtool_op_get_flags(dev);
+
+                rc = bnx2x_set_flags(dev, (flags & ~ETH_FLAG_LRO));
+        }
+
+        return rc;
 }
 
 static int bnx2x_set_tso(struct net_device *dev, u32 data)
@@ -8335,6 +8469,7 @@ static int bnx2x_test_registers(struct bnx2x *bp)
 {
         int idx, i, rc = -ENODEV;
         u32 wr_val = 0;
+        int port = BP_PORT(bp);
         static const struct {
                 u32  offset0;
                 u32  offset1;
@@ -8400,7 +8535,6 @@ static int bnx2x_test_registers(struct bnx2x *bp)
 
                 for (i = 0; reg_tbl[i].offset0 != 0xffffffff; i++) {
                         u32 offset, mask, save_val, val;
-                        int port = BP_PORT(bp);
 
                         offset = reg_tbl[i].offset0 + port*reg_tbl[i].offset1;
                         mask = reg_tbl[i].mask;
@@ -8446,16 +8580,17 @@ static int bnx2x_test_memory(struct bnx2x *bp)
         static const struct {
                 char *name;
                 u32 offset;
-                u32 mask;
+                u32 e1_mask;
+                u32 e1h_mask;
         } prty_tbl[] = {
-                { "CCM_REG_CCM_PRTY_STS",     CCM_REG_CCM_PRTY_STS,     0 },
-                { "CFC_REG_CFC_PRTY_STS",     CFC_REG_CFC_PRTY_STS,     0 },
-                { "DMAE_REG_DMAE_PRTY_STS",   DMAE_REG_DMAE_PRTY_STS,   0 },
-                { "TCM_REG_TCM_PRTY_STS",     TCM_REG_TCM_PRTY_STS,     0 },
-                { "UCM_REG_UCM_PRTY_STS",     UCM_REG_UCM_PRTY_STS,     0 },
-                { "XCM_REG_XCM_PRTY_STS",     XCM_REG_XCM_PRTY_STS,     0x1 },
-
-                { NULL, 0xffffffff, 0 }
+                { "CCM_PRTY_STS",  CCM_REG_CCM_PRTY_STS,   0x3ffc0, 0 },
+                { "CFC_PRTY_STS",  CFC_REG_CFC_PRTY_STS,   0x2,     0x2 },
+                { "DMAE_PRTY_STS", DMAE_REG_DMAE_PRTY_STS, 0,       0 },
+                { "TCM_PRTY_STS",  TCM_REG_TCM_PRTY_STS,   0x3ffc0, 0 },
+                { "UCM_PRTY_STS",  UCM_REG_UCM_PRTY_STS,   0x3ffc0, 0 },
+                { "XCM_PRTY_STS",  XCM_REG_XCM_PRTY_STS,   0x3ffc1, 0 },
+
+                { NULL, 0xffffffff, 0, 0 }
         };
 
         if (!netif_running(bp->dev))
@@ -8469,7 +8604,8 @@ static int bnx2x_test_memory(struct bnx2x *bp)
         /* Check the parity status */
         for (i = 0; prty_tbl[i].offset != 0xffffffff; i++) {
                 val = REG_RD(bp, prty_tbl[i].offset);
-                if (val & ~(prty_tbl[i].mask)) {
+                if ((CHIP_IS_E1(bp) && (val & ~(prty_tbl[i].e1_mask))) ||
+                    (CHIP_IS_E1H(bp) && (val & ~(prty_tbl[i].e1h_mask)))) {
                         DP(NETIF_MSG_HW,
                            "%s is 0x%x\n", prty_tbl[i].name, val);
                         goto test_mem_exit;
@@ -8539,15 +8675,15 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
 
         if (loopback_mode == BNX2X_MAC_LOOPBACK) {
                 bp->link_params.loopback_mode = LOOPBACK_BMAC;
-                bnx2x_phy_hw_lock(bp);
+                bnx2x_acquire_phy_lock(bp);
                 bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-                bnx2x_phy_hw_unlock(bp);
+                bnx2x_release_phy_lock(bp);
 
         } else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
                 bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
-                bnx2x_phy_hw_lock(bp);
+                bnx2x_acquire_phy_lock(bp);
                 bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-                bnx2x_phy_hw_unlock(bp);
+                bnx2x_release_phy_lock(bp);
                 /* wait until link state is restored */
                 bnx2x_wait_for_link(bp, link_up);
 
@@ -8771,7 +8907,7 @@ static void bnx2x_self_test(struct net_device *dev,
         if (!netif_running(dev))
                 return;
 
-        /* offline tests are not suppoerted in MF mode */
+        /* offline tests are not supported in MF mode */
         if (IS_E1HMF(bp))
                 etest->flags &= ~ETH_TEST_FL_OFFLINE;
 
@@ -8827,76 +8963,99 @@ static const struct {
         long offset;
         int size;
         u32 flags;
-        char string[ETH_GSTRING_LEN];
+#define STATS_FLAGS_PORT                1
+#define STATS_FLAGS_FUNC                2
+        u8 string[ETH_GSTRING_LEN];
 } bnx2x_stats_arr[BNX2X_NUM_STATS] = {
-/* 1 */ { STATS_OFFSET32(valid_bytes_received_hi),     8, 1, "rx_bytes" },
-        { STATS_OFFSET32(error_bytes_received_hi),     8, 1, "rx_error_bytes" },
-        { STATS_OFFSET32(total_bytes_transmitted_hi),  8, 1, "tx_bytes" },
-        { STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi), 8, 0, "tx_error_bytes" },
+/* 1 */ { STATS_OFFSET32(valid_bytes_received_hi),
+                                8, STATS_FLAGS_FUNC, "rx_bytes" },
+        { STATS_OFFSET32(error_bytes_received_hi),
+                                8, STATS_FLAGS_FUNC, "rx_error_bytes" },
+        { STATS_OFFSET32(total_bytes_transmitted_hi),
+                                8, STATS_FLAGS_FUNC, "tx_bytes" },
+        { STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi),
+                                8, STATS_FLAGS_PORT, "tx_error_bytes" },
         { STATS_OFFSET32(total_unicast_packets_received_hi),
-                                                8, 1, "rx_ucast_packets" },
+                                8, STATS_FLAGS_FUNC, "rx_ucast_packets" },
         { STATS_OFFSET32(total_multicast_packets_received_hi),
-                                                8, 1, "rx_mcast_packets" },
+                                8, STATS_FLAGS_FUNC, "rx_mcast_packets" },
         { STATS_OFFSET32(total_broadcast_packets_received_hi),
-                                                8, 1, "rx_bcast_packets" },
+                                8, STATS_FLAGS_FUNC, "rx_bcast_packets" },
         { STATS_OFFSET32(total_unicast_packets_transmitted_hi),
-                                                8, 1, "tx_packets" },
+                                8, STATS_FLAGS_FUNC, "tx_packets" },
         { STATS_OFFSET32(tx_stat_dot3statsinternalmactransmiterrors_hi),
-                                                8, 0, "tx_mac_errors" },
+                                8, STATS_FLAGS_PORT, "tx_mac_errors" },
 /* 10 */{ STATS_OFFSET32(rx_stat_dot3statscarriersenseerrors_hi),
-                                                8, 0, "tx_carrier_errors" },
+                                8, STATS_FLAGS_PORT, "tx_carrier_errors" },
         { STATS_OFFSET32(rx_stat_dot3statsfcserrors_hi),
-                                                8, 0, "rx_crc_errors" },
+                                8, STATS_FLAGS_PORT, "rx_crc_errors" },
         { STATS_OFFSET32(rx_stat_dot3statsalignmenterrors_hi),
-                                                8, 0, "rx_align_errors" },
+                                8, STATS_FLAGS_PORT, "rx_align_errors" },
         { STATS_OFFSET32(tx_stat_dot3statssinglecollisionframes_hi),
-                                                8, 0, "tx_single_collisions" },
+                                8, STATS_FLAGS_PORT, "tx_single_collisions" },
         { STATS_OFFSET32(tx_stat_dot3statsmultiplecollisionframes_hi),
-                                                8, 0, "tx_multi_collisions" },
+                                8, STATS_FLAGS_PORT, "tx_multi_collisions" },
         { STATS_OFFSET32(tx_stat_dot3statsdeferredtransmissions_hi),
-                                                8, 0, "tx_deferred" },
+                                8, STATS_FLAGS_PORT, "tx_deferred" },
         { STATS_OFFSET32(tx_stat_dot3statsexcessivecollisions_hi),
-                                                8, 0, "tx_excess_collisions" },
+                                8, STATS_FLAGS_PORT, "tx_excess_collisions" },
         { STATS_OFFSET32(tx_stat_dot3statslatecollisions_hi),
-                                                8, 0, "tx_late_collisions" },
+                                8, STATS_FLAGS_PORT, "tx_late_collisions" },
         { STATS_OFFSET32(tx_stat_etherstatscollisions_hi),
-                                                8, 0, "tx_total_collisions" },
+                                8, STATS_FLAGS_PORT, "tx_total_collisions" },
         { STATS_OFFSET32(rx_stat_etherstatsfragments_hi),
-                                                8, 0, "rx_fragments" },
-/* 20 */{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi), 8, 0, "rx_jabbers" },
+                                8, STATS_FLAGS_PORT, "rx_fragments" },
+/* 20 */{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi),
+                                8, STATS_FLAGS_PORT, "rx_jabbers" },
         { STATS_OFFSET32(rx_stat_etherstatsundersizepkts_hi),
-                                                8, 0, "rx_undersize_packets" },
+                                8, STATS_FLAGS_PORT, "rx_undersize_packets" },
         { STATS_OFFSET32(jabber_packets_received),
-                                                4, 1, "rx_oversize_packets" },
+                                4, STATS_FLAGS_FUNC, "rx_oversize_packets" },
         { STATS_OFFSET32(tx_stat_etherstatspkts64octets_hi),
-                                                8, 0, "tx_64_byte_packets" },
+                                8, STATS_FLAGS_PORT, "tx_64_byte_packets" },
         { STATS_OFFSET32(tx_stat_etherstatspkts65octetsto127octets_hi),
-                                        8, 0, "tx_65_to_127_byte_packets" },
+                        8, STATS_FLAGS_PORT, "tx_65_to_127_byte_packets" },
         { STATS_OFFSET32(tx_stat_etherstatspkts128octetsto255octets_hi),
-                                        8, 0, "tx_128_to_255_byte_packets" },
+                        8, STATS_FLAGS_PORT, "tx_128_to_255_byte_packets" },
         { STATS_OFFSET32(tx_stat_etherstatspkts256octetsto511octets_hi),
-                                        8, 0, "tx_256_to_511_byte_packets" },
+                        8, STATS_FLAGS_PORT, "tx_256_to_511_byte_packets" },
         { STATS_OFFSET32(tx_stat_etherstatspkts512octetsto1023octets_hi),
-                                        8, 0, "tx_512_to_1023_byte_packets" },
+                        8, STATS_FLAGS_PORT, "tx_512_to_1023_byte_packets" },
         { STATS_OFFSET32(etherstatspkts1024octetsto1522octets_hi),
-                                        8, 0, "tx_1024_to_1522_byte_packets" },
+                        8, STATS_FLAGS_PORT, "tx_1024_to_1522_byte_packets" },
         { STATS_OFFSET32(etherstatspktsover1522octets_hi),
-                                        8, 0, "tx_1523_to_9022_byte_packets" },
+                        8, STATS_FLAGS_PORT, "tx_1523_to_9022_byte_packets" },
 /* 30 */{ STATS_OFFSET32(rx_stat_xonpauseframesreceived_hi),
-                                                8, 0, "rx_xon_frames" },
+                                8, STATS_FLAGS_PORT, "rx_xon_frames" },
         { STATS_OFFSET32(rx_stat_xoffpauseframesreceived_hi),
-                                                8, 0, "rx_xoff_frames" },
-        { STATS_OFFSET32(tx_stat_outxonsent_hi),  8, 0, "tx_xon_frames" },
-        { STATS_OFFSET32(tx_stat_outxoffsent_hi), 8, 0, "tx_xoff_frames" },
+                                8, STATS_FLAGS_PORT, "rx_xoff_frames" },
+        { STATS_OFFSET32(tx_stat_outxonsent_hi),
+                                8, STATS_FLAGS_PORT, "tx_xon_frames" },
+        { STATS_OFFSET32(tx_stat_outxoffsent_hi),
+                                8, STATS_FLAGS_PORT, "tx_xoff_frames" },
         { STATS_OFFSET32(rx_stat_maccontrolframesreceived_hi),
-                                                8, 0, "rx_mac_ctrl_frames" },
-        { STATS_OFFSET32(mac_filter_discard),   4, 1, "rx_filtered_packets" },
-        { STATS_OFFSET32(no_buff_discard),      4, 1, "rx_discards" },
-        { STATS_OFFSET32(xxoverflow_discard),   4, 1, "rx_fw_discards" },
-        { STATS_OFFSET32(brb_drop_hi),          8, 1, "brb_discard" },
-/* 39 */{ STATS_OFFSET32(brb_truncate_discard), 8, 1, "brb_truncate" }
+                                8, STATS_FLAGS_PORT, "rx_mac_ctrl_frames" },
+        { STATS_OFFSET32(mac_filter_discard),
+                                4, STATS_FLAGS_PORT, "rx_filtered_packets" },
+        { STATS_OFFSET32(no_buff_discard),
+                                4, STATS_FLAGS_FUNC, "rx_discards" },
+        { STATS_OFFSET32(xxoverflow_discard),
+                                4, STATS_FLAGS_PORT, "rx_fw_discards" },
+        { STATS_OFFSET32(brb_drop_hi),
+                                8, STATS_FLAGS_PORT, "brb_discard" },
+        { STATS_OFFSET32(brb_truncate_hi),
+                                8, STATS_FLAGS_PORT, "brb_truncate" },
+/* 40 */{ STATS_OFFSET32(rx_err_discard_pkt),
+                                4, STATS_FLAGS_FUNC, "rx_phy_ip_err_discards"},
+        { STATS_OFFSET32(rx_skb_alloc_failed),
+                                4, STATS_FLAGS_FUNC, "rx_skb_alloc_discard" },
+/* 42 */{ STATS_OFFSET32(hw_csum_err),
+                                4, STATS_FLAGS_FUNC, "rx_csum_offload_errors" }
 };
 
+#define IS_NOT_E1HMF_STAT(bp, i) \
+                (IS_E1HMF(bp) && (bnx2x_stats_arr[i].flags & STATS_FLAGS_PORT))
+
 static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 {
         struct bnx2x *bp = netdev_priv(dev);
@@ -8905,7 +9064,7 @@ static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
         switch (stringset) {
         case ETH_SS_STATS:
                 for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-                        if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+                        if (IS_NOT_E1HMF_STAT(bp, i))
                                 continue;
                         strcpy(buf + j*ETH_GSTRING_LEN,
                                bnx2x_stats_arr[i].string);
@@ -8925,7 +9084,7 @@ static int bnx2x_get_stats_count(struct net_device *dev)
         int i, num_stats = 0;
 
         for (i = 0; i < BNX2X_NUM_STATS; i++) {
-                if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+                if (IS_NOT_E1HMF_STAT(bp, i))
                         continue;
                 num_stats++;
         }
@@ -8940,7 +9099,7 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev,
         int i, j;
 
         for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-                if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+                if (IS_NOT_E1HMF_STAT(bp, i))
                         continue;
 
                 if (bnx2x_stats_arr[i].size == 0) {
@@ -9057,7 +9216,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
                                        PCI_PM_CTRL_PME_STATUS));
 
                 if (pmcsr & PCI_PM_CTRL_STATE_MASK)
-                /* delay required during transition out of D3hot */
+                        /* delay required during transition out of D3hot */
                         msleep(20);
                 break;
 
@@ -9104,17 +9263,16 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 
         bnx2x_update_fpsb_idx(fp);
 
-        if ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) ||
-            (fp->tx_pkt_prod != fp->tx_pkt_cons))
+        if (BNX2X_HAS_TX_WORK(fp))
                 bnx2x_tx_int(fp, budget);
 
-        if (le16_to_cpu(*fp->rx_cons_sb) != fp->rx_comp_cons)
+        if (BNX2X_HAS_RX_WORK(fp))
                 work_done = bnx2x_rx_int(fp, budget);
 
-        rmb(); /* bnx2x_has_work() reads the status block */
+        rmb(); /* BNX2X_HAS_WORK() reads the status block */
 
         /* must not complete if we consumed full budget */
-        if ((work_done < budget) && !bnx2x_has_work(fp)) {
+        if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
 
 #ifdef BNX2X_STOP_ON_ERROR
 poll_panic:
@@ -9131,7 +9289,7 @@ poll_panic:
 
 
 /* we split the first BD into headers and data BDs
- * to ease the pain of our fellow micocode engineers
+ * to ease the pain of our fellow microcode engineers
  * we use one mapping for both BDs
  * So far this has only been observed to happen
  * in Other Operating Systems(TM)
@@ -9238,7 +9396,7 @@ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
                         /* Check if LSO packet needs to be copied:
                            3 = 1 (for headers BD) + 2 (for PBD and last BD) */
                         int wnd_size = MAX_FETCH_BD - 3;
-                        /* Number of widnows to check */
+                        /* Number of windows to check */
                         int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
                         int wnd_idx = 0;
                         int frag_idx = 0;
@@ -9340,7 +9498,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
            skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
            ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
 
-        /* First, check if we need to linearaize the skb
+        /* First, check if we need to linearize the skb
            (due to FW restrictions) */
         if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
                 /* Statistics of linearization */
@@ -9349,7 +9507,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
                         DP(NETIF_MSG_TX_QUEUED, "SKB linearization failed - "
                            "silently dropping this SKB\n");
                         dev_kfree_skb_any(skb);
-                        return 0;
+                        return NETDEV_TX_OK;
                 }
         }
 
@@ -9372,7 +9530,8 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
         tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
         tx_bd->general_data = (UNICAST_ADDRESS <<
                                ETH_TX_BD_ETH_ADDR_TYPE_SHIFT);
-        tx_bd->general_data |= 1; /* header nbd */
+        /* header nbd */
+        tx_bd->general_data |= (1 << ETH_TX_BD_HDR_NBDS_SHIFT);
 
         /* remember the first BD of the packet */
         tx_buf->first_bd = fp->tx_bd_prod;
@@ -9451,7 +9610,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
         tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
-        nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL)? 1 : 2);
+        nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL) ? 1 : 2);
         tx_bd->nbd = cpu_to_le16(nbd);
         tx_bd->nbytes = cpu_to_le16(skb_headlen(skb));
 
@@ -9721,9 +9880,9 @@ static int bnx2x_change_mac_addr(struct net_device *dev, void *p)
         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
         if (netif_running(dev)) {
                 if (CHIP_IS_E1(bp))
-                        bnx2x_set_mac_addr_e1(bp);
+                        bnx2x_set_mac_addr_e1(bp, 1);
                 else
-                        bnx2x_set_mac_addr_e1h(bp);
+                        bnx2x_set_mac_addr_e1h(bp, 1);
         }
 
         return 0;
@@ -9734,6 +9893,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
         struct mii_ioctl_data *data = if_mii(ifr);
         struct bnx2x *bp = netdev_priv(dev);
+        int port = BP_PORT(bp);
         int err;
 
         switch (cmd) {
@@ -9749,7 +9909,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
                         return -EAGAIN;
 
                 mutex_lock(&bp->port.phy_mutex);
-                err = bnx2x_cl45_read(bp, BP_PORT(bp), 0, bp->port.phy_addr,
+                err = bnx2x_cl45_read(bp, port, 0, bp->port.phy_addr,
                                       DEFAULT_PHY_DEV_ADDR,
                                       (data->reg_num & 0x1f), &mii_regval);
                 data->val_out = mii_regval;
@@ -9765,7 +9925,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
                         return -EAGAIN;
 
                 mutex_lock(&bp->port.phy_mutex);
-                err = bnx2x_cl45_write(bp, BP_PORT(bp), 0, bp->port.phy_addr,
+                err = bnx2x_cl45_write(bp, port, 0, bp->port.phy_addr,
                                        DEFAULT_PHY_DEV_ADDR,
                                        (data->reg_num & 0x1f), data->val_in);
                 mutex_unlock(&bp->port.phy_mutex);
@@ -10141,7 +10301,7 @@ static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
 
         netif_device_detach(dev);
 
-        bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+        bnx2x_nic_unload(bp, UNLOAD_CLOSE);
 
         bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
 
@@ -10174,7 +10334,7 @@ static int bnx2x_resume(struct pci_dev *pdev)
         bnx2x_set_power_state(bp, PCI_D0);
         netif_device_attach(dev);
 
-        rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+        rc = bnx2x_nic_load(bp, LOAD_OPEN);
 
         rtnl_unlock();
 
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 15c9a9946724..a67b0c358ae4 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -6,7 +6,7 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * The registers description starts with the regsister Access type followed
+ * The registers description starts with the register Access type followed
  * by size in bits. For example [RW 32]. The access types are:
  * R  - Read only
  * RC - Clear on read
@@ -49,7 +49,7 @@
 /* [RW 10] Write client 0: Assert pause threshold. */
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0                           0x60068
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1                           0x6006c
-/* [R 24] The number of full blocks occpied by port. */
+/* [R 24] The number of full blocks occupied by port. */
 #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0                           0x60094
 /* [RW 1] Reset the design by software. */
 #define BRB1_REG_SOFT_RESET                                      0x600dc
@@ -740,6 +740,7 @@
 #define HC_REG_ATTN_MSG1_ADDR_L                                  0x108020
 #define HC_REG_ATTN_NUM_P0                                       0x108038
 #define HC_REG_ATTN_NUM_P1                                       0x10803c
+#define HC_REG_COMMAND_REG                                       0x108180
 #define HC_REG_CONFIG_0                                          0x108000
 #define HC_REG_CONFIG_1                                          0x108004
 #define HC_REG_FUNC_NUM_P0                                       0x1080ac
@@ -1372,6 +1373,23 @@
    be asserted). */
 #define MISC_REG_DRIVER_CONTROL_16                               0xa5f0
 #define MISC_REG_DRIVER_CONTROL_16_SIZE                          2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+   32 clients. Each client can be controlled by one driver only. One in each
+   bit represent that this driver control the appropriate client (Ex: bit 5
+   is set means this driver control client number 5). addr1 = set; addr0 =
+   clear; read from both addresses will give the same result = status. write
+   to address 1 will set a request to control all the clients that their
+   appropriate bit (in the write command) is set. if the client is free (the
+   appropriate bit in all the other drivers is clear) one will be written to
+   that driver register; if the client isn't free the bit will remain zero.
+   if the appropriate bit is set (the driver request to gain control on a
+   client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+   interrupt will be asserted). write to address 0 will set a request to
+   free all the clients that their appropriate bit (in the write command) is
+   set. if the appropriate bit is clear (the driver request to free a client
+   it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+   be asserted). */
+#define MISC_REG_DRIVER_CONTROL_7                                0xa3c8
 /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
    only. */
 #define MISC_REG_E1HMF_MODE                                      0xa5f8
@@ -1394,13 +1412,13 @@
 #define MISC_REG_GPIO                                            0xa490
 /* [R 28] this field hold the last information that caused reserved
    attention. bits [19:0] - address; [22:20] function; [23] reserved;
-   [27:24] the master thatcaused the attention - according to the following
+   [27:24] the master that caused the attention - according to the following
    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
    dbu; 8 = dmae */
 #define MISC_REG_GRC_RSV_ATTN                                    0xa3c0
 /* [R 28] this field hold the last information that caused timeout
    attention. bits [19:0] - address; [22:20] function; [23] reserved;
-   [27:24] the master thatcaused the attention - according to the following
+   [27:24] the master that caused the attention - according to the following
    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
    dbu; 8 = dmae */
 #define MISC_REG_GRC_TIMEOUT_ATTN                                0xa3c4
@@ -1677,6 +1695,7 @@
 /* [RW 8] init credit counter for port0 in LLH */
 #define NIG_REG_LLH0_XCM_INIT_CREDIT                             0x10554
 #define NIG_REG_LLH0_XCM_MASK                                    0x10130
+#define NIG_REG_LLH1_BRB1_DRV_MASK                               0x10248
 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
 #define NIG_REG_LLH1_BRB1_NOT_MCP                                0x102dc
 /* [RW 2] Determine the classification participants. 0: no classification.1:
@@ -1727,6 +1746,9 @@
 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
    for port0 */
 #define NIG_REG_STAT0_BRB_DISCARD                                0x105f0
+/* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
+   for port0 */
+#define NIG_REG_STAT0_BRB_TRUNCATE                               0x105f8
 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
    between 1024 and 1522 bytes for port0 */
 #define NIG_REG_STAT0_EGRESS_MAC_PKT0                            0x10750
@@ -2298,7 +2320,7 @@
 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
    -128k */
 #define PXP2_REG_RQ_QM_P_SIZE                                    0x120050
-/* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */
+/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
 #define PXP2_REG_RQ_RBC_DONE                                     0x1201b0
 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
    001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
@@ -2406,7 +2428,7 @@
 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
    buffer reaches this number has_payload will be asserted */
 #define PXP2_REG_WR_DMAE_MPS                                     0x1205ec
-/* [RW 10] if Number of entries in dmae fifo will be higer than this
+/* [RW 10] if Number of entries in dmae fifo will be higher than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_DMAE_TH                                      0x120368
@@ -2427,7 +2449,7 @@
 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
    buffer reaches this number has_payload will be asserted */
 #define PXP2_REG_WR_TSDM_MPS                                     0x1205d4
-/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
+/* [RW 10] if Number of entries in usdmdp fifo will be higher than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_USDMDP_TH                                    0x120348
@@ -3294,12 +3316,12 @@
 #define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE              0
 #define CFC_DEBUG1_REG_WRITE_AC                                  (0x1<<4)
 #define CFC_DEBUG1_REG_WRITE_AC_SIZE                             4
-/* [R 1] debug only: This bit indicates wheter indicates that external
+/* [R 1] debug only: This bit indicates whether indicates that external
    buffer was wrapped (oldest data was thrown); Relevant only when
    ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
 #define DBG_REG_WRAP_ON_EXT_BUFFER                               0xc124
 #define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE                          1
-/* [R 1] debug only: This bit indicates wheter the internal buffer was
+/* [R 1] debug only: This bit indicates whether the internal buffer was
    wrapped (oldest data was thrown) Relevant only when
    ~dbg_registers_debug_target=0 (internal buffer) */
 #define DBG_REG_WRAP_ON_INT_BUFFER                               0xc128
@@ -4944,6 +4966,7 @@
 #define EMAC_RX_MODE_PROMISCUOUS                                 (1L<<8)
 #define EMAC_RX_MTU_SIZE_JUMBO_ENA                               (1L<<31)
 #define EMAC_TX_MODE_EXT_PAUSE_EN                                (1L<<3)
+#define EMAC_TX_MODE_FLOW_EN                                     (1L<<4)
 #define MISC_REGISTERS_GPIO_0                                    0
 #define MISC_REGISTERS_GPIO_1                                    1
 #define MISC_REGISTERS_GPIO_2                                    2
@@ -4959,6 +4982,7 @@
 #define MISC_REGISTERS_GPIO_PORT_SHIFT                           4
 #define MISC_REGISTERS_GPIO_SET_POS                              8
 #define MISC_REGISTERS_RESET_REG_1_CLEAR                         0x588
+#define MISC_REGISTERS_RESET_REG_1_RST_NIG                       (0x1<<7)
 #define MISC_REGISTERS_RESET_REG_1_SET                           0x584
 #define MISC_REGISTERS_RESET_REG_2_CLEAR                         0x598
 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0                     (0x1<<0)
@@ -4993,7 +5017,9 @@
 #define HW_LOCK_MAX_RESOURCE_VALUE                               31
 #define HW_LOCK_RESOURCE_8072_MDIO                               0
 #define HW_LOCK_RESOURCE_GPIO                                    1
+#define HW_LOCK_RESOURCE_PORT0_ATT_MASK                          3
 #define HW_LOCK_RESOURCE_SPIO                                    2
+#define HW_LOCK_RESOURCE_UNDI                                    5
 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR                 (1<<18)
 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT                 (1<<31)
 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT                 (1<<9)
@@ -5144,59 +5170,73 @@
 #define GRCBASE_MISC_AEU        GRCBASE_MISC
 
 
-/*the offset of the configuration space in the pci core register*/
+/* offset of configuration space in the pci core register */
 #define PCICFG_OFFSET                                   0x2000
 #define PCICFG_VENDOR_ID_OFFSET                         0x00
 #define PCICFG_DEVICE_ID_OFFSET                         0x02
 #define PCICFG_COMMAND_OFFSET                           0x04
+#define PCICFG_COMMAND_IO_SPACE                 (1<<0)
+#define PCICFG_COMMAND_MEM_SPACE                (1<<1)
+#define PCICFG_COMMAND_BUS_MASTER               (1<<2)
+#define PCICFG_COMMAND_SPECIAL_CYCLES           (1<<3)
+#define PCICFG_COMMAND_MWI_CYCLES               (1<<4)
+#define PCICFG_COMMAND_VGA_SNOOP                (1<<5)
+#define PCICFG_COMMAND_PERR_ENA                 (1<<6)
+#define PCICFG_COMMAND_STEPPING                 (1<<7)
+#define PCICFG_COMMAND_SERR_ENA                 (1<<8)
+#define PCICFG_COMMAND_FAST_B2B                 (1<<9)
+#define PCICFG_COMMAND_INT_DISABLE              (1<<10)
+#define PCICFG_COMMAND_RESERVED                 (0x1f<<11)
 #define PCICFG_STATUS_OFFSET                            0x06
-#define PCICFG_REVESION_ID                                  0x08
+#define PCICFG_REVESION_ID                              0x08
 #define PCICFG_CACHE_LINE_SIZE                          0x0c
 #define PCICFG_LATENCY_TIMER                            0x0d
-#define PCICFG_BAR_1_LOW                                    0x10
-#define PCICFG_BAR_1_HIGH                                   0x14
-#define PCICFG_BAR_2_LOW                                    0x18
-#define PCICFG_BAR_2_HIGH                                   0x1c
-#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET       0x2c
+#define PCICFG_BAR_1_LOW                                0x10
+#define PCICFG_BAR_1_HIGH                               0x14
+#define PCICFG_BAR_2_LOW                                0x18
+#define PCICFG_BAR_2_HIGH                               0x1c
+#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET               0x2c
 #define PCICFG_SUBSYSTEM_ID_OFFSET                      0x2e
-#define PCICFG_INT_LINE                                     0x3c
-#define PCICFG_INT_PIN                                      0x3d
-#define PCICFG_PM_CSR_OFFSET                    0x4c
-#define PCICFG_GRC_ADDRESS                                  0x78
-#define PCICFG_GRC_DATA                                     0x80
+#define PCICFG_INT_LINE                                 0x3c
+#define PCICFG_INT_PIN                                  0x3d
+#define PCICFG_PM_CAPABILITY                            0x48
+#define PCICFG_PM_CAPABILITY_VERSION            (0x3<<16)
+#define PCICFG_PM_CAPABILITY_CLOCK              (1<<19)
+#define PCICFG_PM_CAPABILITY_RESERVED           (1<<20)
+#define PCICFG_PM_CAPABILITY_DSI                (1<<21)
+#define PCICFG_PM_CAPABILITY_AUX_CURRENT        (0x7<<22)
+#define PCICFG_PM_CAPABILITY_D1_SUPPORT         (1<<25)
+#define PCICFG_PM_CAPABILITY_D2_SUPPORT         (1<<26)
+#define PCICFG_PM_CAPABILITY_PME_IN_D0          (1<<27)
+#define PCICFG_PM_CAPABILITY_PME_IN_D1          (1<<28)
+#define PCICFG_PM_CAPABILITY_PME_IN_D2          (1<<29)
+#define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT      (1<<30)
+#define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD     (1<<31)
+#define PCICFG_PM_CSR_OFFSET                            0x4c
+#define PCICFG_PM_CSR_STATE                     (0x3<<0)
+#define PCICFG_PM_CSR_PME_ENABLE                (1<<8)
+#define PCICFG_PM_CSR_PME_STATUS                (1<<15)
+#define PCICFG_GRC_ADDRESS                              0x78
+#define PCICFG_GRC_DATA                                 0x80
 #define PCICFG_DEVICE_CONTROL                           0xb4
 #define PCICFG_LINK_CONTROL                             0xbc
 
-#define PCICFG_COMMAND_IO_SPACE                     (1<<0)
-#define PCICFG_COMMAND_MEM_SPACE                    (1<<1)
-#define PCICFG_COMMAND_BUS_MASTER                   (1<<2)
-#define PCICFG_COMMAND_SPECIAL_CYCLES               (1<<3)
-#define PCICFG_COMMAND_MWI_CYCLES                   (1<<4)
-#define PCICFG_COMMAND_VGA_SNOOP                    (1<<5)
-#define PCICFG_COMMAND_PERR_ENA                     (1<<6)
-#define PCICFG_COMMAND_STEPPING                     (1<<7)
-#define PCICFG_COMMAND_SERR_ENA                     (1<<8)
-#define PCICFG_COMMAND_FAST_B2B                     (1<<9)
-#define PCICFG_COMMAND_INT_DISABLE                  (1<<10)
-#define PCICFG_COMMAND_RESERVED                     (0x1f<<11)
-
-#define PCICFG_PM_CSR_STATE                         (0x3<<0)
-#define PCICFG_PM_CSR_PME_STATUS                    (1<<15)
 
 #define BAR_USTRORM_INTMEM                              0x400000
 #define BAR_CSTRORM_INTMEM                              0x410000
 #define BAR_XSTRORM_INTMEM                              0x420000
 #define BAR_TSTRORM_INTMEM                              0x430000
 
+/* for accessing the IGU in case of status block ACK */
 #define BAR_IGU_INTMEM                                  0x440000
 
 #define BAR_DOORBELL_OFFSET                             0x800000
 
 #define BAR_ME_REGISTER                                 0x450000
 
-
-#define GRC_CONFIG_2_SIZE_REG               0x408 /* config_2 offset */
-#define PCI_CONFIG_2_BAR1_SIZE                      (0xfL<<0)
+/* config_2 offset */
+#define GRC_CONFIG_2_SIZE_REG                           0x408
+#define PCI_CONFIG_2_BAR1_SIZE                  (0xfL<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_DISABLED         (0L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_64K              (1L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_128K             (2L<<0)
@@ -5213,11 +5253,11 @@
 #define PCI_CONFIG_2_BAR1_SIZE_256M             (13L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_512M             (14L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_1G               (15L<<0)
-#define PCI_CONFIG_2_BAR1_64ENA                     (1L<<4)
-#define PCI_CONFIG_2_EXP_ROM_RETRY                  (1L<<5)
-#define PCI_CONFIG_2_CFG_CYCLE_RETRY                (1L<<6)
-#define PCI_CONFIG_2_FIRST_CFG_DONE                 (1L<<7)
-#define PCI_CONFIG_2_EXP_ROM_SIZE                   (0xffL<<8)
+#define PCI_CONFIG_2_BAR1_64ENA                 (1L<<4)
+#define PCI_CONFIG_2_EXP_ROM_RETRY              (1L<<5)
+#define PCI_CONFIG_2_CFG_CYCLE_RETRY            (1L<<6)
+#define PCI_CONFIG_2_FIRST_CFG_DONE             (1L<<7)
+#define PCI_CONFIG_2_EXP_ROM_SIZE               (0xffL<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED      (0L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_2K            (1L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_4K            (2L<<8)
@@ -5234,46 +5274,44 @@
 #define PCI_CONFIG_2_EXP_ROM_SIZE_8M            (13L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_16M           (14L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_32M           (15L<<8)
-#define PCI_CONFIG_2_BAR_PREFETCH                   (1L<<16)
-#define PCI_CONFIG_2_RESERVED0                      (0x7fffL<<17)
+#define PCI_CONFIG_2_BAR_PREFETCH               (1L<<16)
+#define PCI_CONFIG_2_RESERVED0                  (0x7fffL<<17)
 
 /* config_3 offset */
-#define GRC_CONFIG_3_SIZE_REG                           (0x40c)
-#define PCI_CONFIG_3_STICKY_BYTE                    (0xffL<<0)
-#define PCI_CONFIG_3_FORCE_PME                      (1L<<24)
-#define PCI_CONFIG_3_PME_STATUS                     (1L<<25)
-#define PCI_CONFIG_3_PME_ENABLE                     (1L<<26)
-#define PCI_CONFIG_3_PM_STATE                       (0x3L<<27)
-#define PCI_CONFIG_3_VAUX_PRESET                    (1L<<30)
-#define PCI_CONFIG_3_PCI_POWER                      (1L<<31)
-
-/* config_2 offset */
-#define GRC_CONFIG_2_SIZE_REG               0x408
+#define GRC_CONFIG_3_SIZE_REG                           0x40c
+#define PCI_CONFIG_3_STICKY_BYTE                (0xffL<<0)
+#define PCI_CONFIG_3_FORCE_PME                  (1L<<24)
+#define PCI_CONFIG_3_PME_STATUS                 (1L<<25)
+#define PCI_CONFIG_3_PME_ENABLE                 (1L<<26)
+#define PCI_CONFIG_3_PM_STATE                   (0x3L<<27)
+#define PCI_CONFIG_3_VAUX_PRESET                (1L<<30)
+#define PCI_CONFIG_3_PCI_POWER                  (1L<<31)
 
 #define GRC_BAR2_CONFIG                                 0x4e0
-#define PCI_CONFIG_2_BAR2_SIZE                      (0xfL<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_DISABLED             (0L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_64K                  (1L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_128K                 (2L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_256K                 (3L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_512K                 (4L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_1M                   (5L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_2M                   (6L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_4M                   (7L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_8M                   (8L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_16M                  (9L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_32M                  (10L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_64M                  (11L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_128M                 (12L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_256M                 (13L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_512M                 (14L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_1G                   (15L<<0)
-#define PCI_CONFIG_2_BAR2_64ENA                     (1L<<4)
+#define PCI_CONFIG_2_BAR2_SIZE                  (0xfL<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_DISABLED         (0L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64K              (1L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128K             (2L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256K             (3L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512K             (4L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1M               (5L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_2M               (6L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_4M               (7L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_8M               (8L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_16M              (9L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_32M              (10L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64M              (11L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128M             (12L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256M             (13L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512M             (14L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1G               (15L<<0)
+#define PCI_CONFIG_2_BAR2_64ENA                 (1L<<4)
+
+#define PCI_PM_DATA_A                                   0x410
+#define PCI_PM_DATA_B                                   0x414
+#define PCI_ID_VAL1                                     0x434
+#define PCI_ID_VAL2                                     0x438
 
-#define PCI_PM_DATA_A                                   (0x410)
-#define PCI_PM_DATA_B                                   (0x414)
-#define PCI_ID_VAL1                                     (0x434)
-#define PCI_ID_VAL2                                     (0x438)
 
 #define MDIO_REG_BANK_CL73_IEEEB0                       0x0
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL                0x0
@@ -5522,6 +5560,8 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_PMA_REG_GEN_CTRL           0xca10
 #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP     0x0188
 #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET           0x018a
+#define MDIO_PMA_REG_M8051_MSGIN_REG    0xca12
+#define MDIO_PMA_REG_M8051_MSGOUT_REG   0xca13
 #define MDIO_PMA_REG_ROM_VER1           0xca19
 #define MDIO_PMA_REG_ROM_VER2           0xca1a
 #define MDIO_PMA_REG_EDC_FFE_MAIN       0xca1b
@@ -5576,7 +5616,8 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_AN_REG_LINK_STATUS         0x8304
 #define MDIO_AN_REG_CL37_CL73           0x8370
 #define MDIO_AN_REG_CL37_AN             0xffe0
-#define MDIO_AN_REG_CL37_FD             0xffe4
+#define MDIO_AN_REG_CL37_FC_LD          0xffe4
+#define MDIO_AN_REG_CL37_FC_LP          0xffe5
 
 
 #define IGU_FUNC_BASE                   0x0400
@@ -5600,4 +5641,13 @@ Theotherbitsarereservedandshouldbezero*/
 #define IGU_INT_NOP                             2
 #define IGU_INT_NOP2                    3
 
+#define COMMAND_REG_INT_ACK         0x0
+#define COMMAND_REG_PROD_UPD        0x4
+#define COMMAND_REG_ATTN_BITS_UPD   0x8
+#define COMMAND_REG_ATTN_BITS_SET   0xc
+#define COMMAND_REG_ATTN_BITS_CLR   0x10
+#define COMMAND_REG_COALESCE_NOW    0x14
+#define COMMAND_REG_SIMD_MASK       0x18
+#define COMMAND_REG_SIMD_NOMASK     0x1c
+
 
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index a8771ffc61e8..e07b5c51ec5b 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -23,12 +23,57 @@
 
 static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-        skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
+        if (ret)
+                goto err1;
+        ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
+        if (ret)
+                goto err2;
+
+        ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
+        if (ret)
+                goto err2;
+        ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
+        if (ret)
+                goto err3;
+
+        ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
+        if (ret)
+                goto err3;
+        ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
+        if (ret)
+                goto err4;
+
+        ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
+        if (ret)
+                goto err4;
+        ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
+        if (ret)
+                goto err5;
+
+        skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
         return 0;
+
+err5:
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+err4:
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+err3:
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+err2:
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+err1:
+        return ret;
 }
 
 static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
 }
 
 static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
@@ -109,7 +154,7 @@ static void __exit palmtx_pcmcia_exit(void)
         platform_device_unregister(palmtx_pcmcia_device);
 }
 
-fs_initcall(palmtx_pcmcia_init);
+module_init(palmtx_pcmcia_init);
 module_exit(palmtx_pcmcia_exit);
 
 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 856cc1af40df..35dcc06eb3e2 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -13,7 +13,6 @@
 
 #include <linux/module.h>
 #include <linux/rtc.h>
-#include <linux/smp_lock.h>
 #include "rtc-core.h"
 
 static dev_t rtc_devt;
@@ -27,11 +26,8 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
                                         struct rtc_device, char_dev);
         const struct rtc_class_ops *ops = rtc->ops;
 
-        lock_kernel();
-        if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags)) {
-                err = -EBUSY;
-                goto out;
-        }
+        if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
+                return -EBUSY;
 
         file->private_data = rtc;
 
@@ -41,13 +37,11 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
                 rtc->irq_data = 0;
                 spin_unlock_irq(&rtc->irq_lock);
 
-                goto out;
+                return 0;
         }
 
         /* something has gone wrong */
         clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
-out:
-        unlock_kernel();
         return err;
 }
 
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index fbb90b1e4098..a81adab6e515 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -482,7 +482,7 @@ isl1208_sysfs_register(struct device *dev)
 static int
 isl1208_sysfs_unregister(struct device *dev)
 {
-        device_remove_file(dev, &dev_attr_atrim);
+        device_remove_file(dev, &dev_attr_dtrim);
         device_remove_file(dev, &dev_attr_atrim);
         device_remove_file(dev, &dev_attr_usr);
 
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
index 73a86d09bba8..9c129248466c 100644
--- a/drivers/sbus/sbus.c
+++ b/drivers/sbus/sbus.c
@@ -7,13 +7,13 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/sbus.h>
 #include <asm/dma.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/bpp.h>
 #include <asm/irq.h>
 
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index fcdd73f25625..994da56fffed 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -680,7 +680,7 @@ static int alua_prep_fn(struct scsi_device *sdev, struct request *req)
 
 }
 
-const struct scsi_dh_devlist alua_dev_list[] = {
+static const struct scsi_dh_devlist alua_dev_list[] = {
         {"HP", "MSA VOLUME" },
         {"HP", "HSV101" },
         {"HP", "HSV111" },
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index aa46b131b20e..b9d23e9e9a44 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -562,7 +562,7 @@ done:
         return result;
 }
 
-const struct scsi_dh_devlist clariion_dev_list[] = {
+static const struct scsi_dh_devlist clariion_dev_list[] = {
         {"DGC", "RAID"},
         {"DGC", "DISK"},
         {"DGC", "VRAID"},
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 9c7a1f8ebb72..a6a4ef3ad51c 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -282,7 +282,7 @@ static int hp_sw_activate(struct scsi_device *sdev)
         return ret;
 }
 
-const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
+static const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
         {"COMPAQ", "MSA1000 VOLUME"},
         {"COMPAQ", "HSV110"},
         {"HP", "HSV100"},
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index b093a501f8ae..e7c7b4ebc1fe 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -574,7 +574,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
         return SCSI_RETURN_NOT_HANDLED;
 }
 
-const struct scsi_dh_devlist rdac_dev_list[] = {
+static const struct scsi_dh_devlist rdac_dev_list[] = {
         {"IBM", "1722"},
         {"IBM", "1724"},
         {"IBM", "1726"},
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3b4a14e355c1..77cb34270fc1 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -449,6 +449,7 @@ config SERIAL_CLPS711X_CONSOLE
 config SERIAL_SAMSUNG
         tristate "Samsung SoC serial support"
         depends on ARM && PLAT_S3C24XX
+        select SERIAL_CORE
         help
           Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
           providing /dev/ttySAC0, 1 and 2 (note, some machines may not
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index aeeec5588afd..e41766d08035 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -17,11 +17,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/hypervisor.h>
 #include <asm/spitfire.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/irq.h>
 
 #if defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 15ee497e1c78..29b4458abf74 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -32,11 +32,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index e24e68235088..a378464f9292 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -35,11 +35,11 @@
 #include <linux/serial_reg.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 0f3d69b86d67..3cb4c8aee13f 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -32,11 +32,11 @@
 #include <linux/serio.h>
 #endif
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 964124b60db2..75e86865234c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -226,10 +226,11 @@ EXPORT_SYMBOL_GPL(spi_alloc_device);
  * Companion function to spi_alloc_device.  Devices allocated with
  * spi_alloc_device can be added onto the spi bus with this function.
  *
- * Returns 0 on success; non-zero on failure
+ * Returns 0 on success; negative errno on failure
  */
 int spi_add_device(struct spi_device *spi)
 {
+        static DEFINE_MUTEX(spi_add_lock);
         struct device *dev = spi->master->dev.parent;
         int status;
 
@@ -246,26 +247,43 @@ int spi_add_device(struct spi_device *spi)
                         "%s.%u", spi->master->dev.bus_id,
                         spi->chip_select);
 
-        /* drivers may modify this initial i/o setup */
+
+        /* We need to make sure there's no other device with this
+         * chipselect **BEFORE** we call setup(), else we'll trash
+         * its configuration.  Lock against concurrent add() calls.
+         */
+        mutex_lock(&spi_add_lock);
+
+        if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id)
+                        != NULL) {
+                dev_err(dev, "chipselect %d already in use\n",
+                                spi->chip_select);
+                status = -EBUSY;
+                goto done;
+        }
+
+        /* Drivers may modify this initial i/o setup, but will
+         * normally rely on the device being setup.  Devices
+         * using SPI_CS_HIGH can't coexist well otherwise...
+         */
         status = spi->master->setup(spi);
         if (status < 0) {
                 dev_err(dev, "can't %s %s, status %d\n",
                                 "setup", spi->dev.bus_id, status);
-                return status;
+                goto done;
         }
 
-        /* driver core catches callers that misbehave by defining
-         * devices that already exist.
-         */
+        /* Device may be bound to an active driver when this returns */
         status = device_add(&spi->dev);
-        if (status < 0) {
+        if (status < 0)
                 dev_err(dev, "can't %s %s, status %d\n",
                                 "add", spi->dev.bus_id, status);
-                return status;
-        }
+        else
+                dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
 
-        dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
-        return 0;
+done:
+        mutex_unlock(&spi_add_lock);
+        return status;
 }
 EXPORT_SYMBOL_GPL(spi_add_device);
 
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 755823cdf62a..bcefbddeba50 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -95,16 +95,18 @@ config USB
 
 source "drivers/usb/core/Kconfig"
 
+source "drivers/usb/mon/Kconfig"
+
 source "drivers/usb/host/Kconfig"
 
+source "drivers/usb/musb/Kconfig"
+
 source "drivers/usb/class/Kconfig"
 
 source "drivers/usb/storage/Kconfig"
 
 source "drivers/usb/image/Kconfig"
 
-source "drivers/usb/mon/Kconfig"
-
 comment "USB port drivers"
         depends on USB
 
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 507a9bd0d77c..9aea43a8c4ad 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -602,7 +602,7 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ
                         offd = le32_to_cpu(buf[offb++]);
                         if (offd >= size) {
                                 if (printk_ratelimit())
-                                        usb_err(instance->usbatm, "wrong index #%x in response to cm #%x\n",
+                                        usb_err(instance->usbatm, "wrong index %#x in response to cm %#x\n",
                                                 offd, cm);
                                 ret = -EIO;
                                 goto cleanup;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0725b1871f23..efc4373ededb 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -51,6 +51,7 @@
  */
 
 #undef DEBUG
+#undef VERBOSE_DEBUG
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -70,6 +71,9 @@
 
 #include "cdc-acm.h"
 
+
+#define ACM_CLOSE_TIMEOUT       15      /* seconds to let writes drain */
+
 /*
  * Version Information
  */
@@ -85,6 +89,12 @@ static DEFINE_MUTEX(open_mutex);
 
 #define ACM_READY(acm)  (acm && acm->dev && acm->used)
 
+#ifdef VERBOSE_DEBUG
+#define verbose 1
+#else
+#define verbose 0
+#endif
+
 /*
  * Functions for ACM control messages.
  */
@@ -136,19 +146,17 @@ static int acm_wb_alloc(struct acm *acm)
 static int acm_wb_is_avail(struct acm *acm)
 {
         int i, n;
+        unsigned long flags;
 
         n = ACM_NW;
+        spin_lock_irqsave(&acm->write_lock, flags);
         for (i = 0; i < ACM_NW; i++) {
                 n -= acm->wb[i].use;
         }
+        spin_unlock_irqrestore(&acm->write_lock, flags);
         return n;
 }
 
-static inline int acm_wb_is_used(struct acm *acm, int wbn)
-{
-        return acm->wb[wbn].use;
-}
-
 /*
  * Finish write.
  */
@@ -157,7 +165,6 @@ static void acm_write_done(struct acm *acm, struct acm_wb *wb)
         unsigned long flags;
 
         spin_lock_irqsave(&acm->write_lock, flags);
-        acm->write_ready = 1;
         wb->use = 0;
         acm->transmitting--;
         spin_unlock_irqrestore(&acm->write_lock, flags);
@@ -190,40 +197,25 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
 static int acm_write_start(struct acm *acm, int wbn)
 {
         unsigned long flags;
-        struct acm_wb *wb;
+        struct acm_wb *wb = &acm->wb[wbn];
         int rc;
 
         spin_lock_irqsave(&acm->write_lock, flags);
         if (!acm->dev) {
+                wb->use = 0;
                 spin_unlock_irqrestore(&acm->write_lock, flags);
                 return -ENODEV;
         }
 
-        if (!acm->write_ready) {
-                spin_unlock_irqrestore(&acm->write_lock, flags);
-                return 0;       /* A white lie */
-        }
-
-        wb = &acm->wb[wbn];
-        if(acm_wb_is_avail(acm) <= 1)
-                acm->write_ready = 0;
-
         dbg("%s susp_count: %d", __func__, acm->susp_count);
         if (acm->susp_count) {
-                acm->old_ready = acm->write_ready;
                 acm->delayed_wb = wb;
-                acm->write_ready = 0;
                 schedule_work(&acm->waker);
                 spin_unlock_irqrestore(&acm->write_lock, flags);
                 return 0;       /* A white lie */
         }
         usb_mark_last_busy(acm->dev);
 
-        if (!acm_wb_is_used(acm, wbn)) {
-                spin_unlock_irqrestore(&acm->write_lock, flags);
-                return 0;
-        }
-
         rc = acm_start_wb(acm, wb);
         spin_unlock_irqrestore(&acm->write_lock, flags);
 
@@ -488,22 +480,28 @@ urbs:
 /* data interface wrote those outgoing bytes */
 static void acm_write_bulk(struct urb *urb)
 {
-        struct acm *acm;
         struct acm_wb *wb = urb->context;
+        struct acm *acm = wb->instance;
 
-        dbg("Entering acm_write_bulk with status %d", urb->status);
+        if (verbose || urb->status
+                        || (urb->actual_length != urb->transfer_buffer_length))
+                dev_dbg(&acm->data->dev, "tx %d/%d bytes -- > %d\n",
+                        urb->actual_length,
+                        urb->transfer_buffer_length,
+                        urb->status);
 
-        acm = wb->instance;
         acm_write_done(acm, wb);
         if (ACM_READY(acm))
                 schedule_work(&acm->work);
+        else
+                wake_up_interruptible(&acm->drain_wait);
 }
 
 static void acm_softint(struct work_struct *work)
 {
         struct acm *acm = container_of(work, struct acm, work);
-        dbg("Entering acm_softint.");
-        
+
+        dev_vdbg(&acm->data->dev, "tx work\n");
         if (!ACM_READY(acm))
                 return;
         tty_wakeup(acm->tty);
@@ -512,7 +510,6 @@ static void acm_softint(struct work_struct *work)
 static void acm_waker(struct work_struct *waker)
 {
         struct acm *acm = container_of(waker, struct acm, waker);
-        long flags;
         int rv;
 
         rv = usb_autopm_get_interface(acm->control);
@@ -524,9 +521,6 @@ static void acm_waker(struct work_struct *waker)
                 acm_start_wb(acm, acm->delayed_wb);
                 acm->delayed_wb = NULL;
         }
-        spin_lock_irqsave(&acm->write_lock, flags);
-        acm->write_ready = acm->old_ready;
-        spin_unlock_irqrestore(&acm->write_lock, flags);
         usb_autopm_put_interface(acm->control);
 }
 
@@ -628,6 +622,8 @@ static void acm_tty_unregister(struct acm *acm)
         kfree(acm);
 }
 
+static int acm_tty_chars_in_buffer(struct tty_struct *tty);
+
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
         struct acm *acm = tty->driver_data;
@@ -642,6 +638,13 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
                 if (acm->dev) {
                         usb_autopm_get_interface(acm->control);
                         acm_set_control(acm, acm->ctrlout = 0);
+
+                        /* try letting the last writes drain naturally */
+                        wait_event_interruptible_timeout(acm->drain_wait,
+                                        (ACM_NW == acm_wb_is_avail(acm))
+                                                || !acm->dev,
+                                        ACM_CLOSE_TIMEOUT * HZ);
+
                         usb_kill_urb(acm->ctrlurb);
                         for (i = 0; i < ACM_NW; i++)
                                 usb_kill_urb(acm->wb[i].urb);
@@ -697,7 +700,7 @@ static int acm_tty_write_room(struct tty_struct *tty)
          * Do not let the line discipline to know that we have a reserve,
          * or it might get too enthusiastic.
          */
-        return (acm->write_ready && acm_wb_is_avail(acm)) ? acm->writesize : 0;
+        return acm_wb_is_avail(acm) ? acm->writesize : 0;
 }
 
 static int acm_tty_chars_in_buffer(struct tty_struct *tty)
@@ -1072,11 +1075,11 @@ skip_normal_probe:
         acm->urb_task.data = (unsigned long) acm;
         INIT_WORK(&acm->work, acm_softint);
         INIT_WORK(&acm->waker, acm_waker);
+        init_waitqueue_head(&acm->drain_wait);
         spin_lock_init(&acm->throttle_lock);
         spin_lock_init(&acm->write_lock);
         spin_lock_init(&acm->read_lock);
         mutex_init(&acm->mutex);
-        acm->write_ready = 1;
         acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
 
         buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
@@ -1108,9 +1111,11 @@ skip_normal_probe:
                 rcv->instance = acm;
         }
         for (i = 0; i < num_rx_buf; i++) {
-                struct acm_rb *buf = &(acm->rb[i]);
+                struct acm_rb *rb = &(acm->rb[i]);
 
-                if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
+                rb->base = usb_buffer_alloc(acm->dev, readsize,
+                                GFP_KERNEL, &rb->dma);
+                if (!rb->base) {
                         dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
                         goto alloc_fail7;
                 }
@@ -1172,6 +1177,7 @@ skip_countries:
         acm_set_line(acm, &acm->line);
 
         usb_driver_claim_interface(&acm_driver, data_interface, acm);
+        usb_set_intfdata(data_interface, acm);
 
         usb_get_intf(control_interface);
         tty_register_device(acm_tty_driver, minor, &control_interface->dev);
@@ -1221,11 +1227,11 @@ static void acm_disconnect(struct usb_interface *intf)
         struct acm *acm = usb_get_intfdata(intf);
         struct usb_device *usb_dev = interface_to_usbdev(intf);
 
-        mutex_lock(&open_mutex);
-        if (!acm || !acm->dev) {
-                mutex_unlock(&open_mutex);
+        /* sibling interface is already cleaning up */
+        if (!acm)
                 return;
-        }
+
+        mutex_lock(&open_mutex);
         if (acm->country_codes){
                 device_remove_file(&acm->control->dev,
                                 &dev_attr_wCountryCodes);
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 85c3aaaab7c5..1f95e7aa1b66 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -106,8 +106,6 @@ struct acm {
         struct list_head spare_read_bufs;
         struct list_head filled_read_bufs;
         int write_used;                                 /* number of non-empty write buffers */
-        int write_ready;                                /* write urb is not running */
-        int old_ready;
         int processing;
         int transmitting;
         spinlock_t write_lock;
@@ -115,6 +113,7 @@ struct acm {
         struct usb_cdc_line_coding line;                /* bits, stop, parity */
         struct work_struct work;                        /* work queue entry for line discipline waking up */
         struct work_struct waker;
+        wait_queue_head_t drain_wait;                   /* close processing */
         struct tasklet_struct urb_task;                 /* rx processing */
         spinlock_t throttle_lock;                       /* synchronize throtteling and read callback */
         unsigned int ctrlin;                            /* input control lines (DCD, DSR, RI, break, overruns) */
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ddb54e14a5c5..2be37fe466f2 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -774,7 +774,6 @@ void usb_deregister(struct usb_driver *driver)
 }
 EXPORT_SYMBOL_GPL(usb_deregister);
 
-
 /* Forced unbinding of a USB interface driver, either because
  * it doesn't support pre_reset/post_reset/reset_resume or
  * because it doesn't support suspend/resume.
@@ -821,6 +820,8 @@ void usb_rebind_intf(struct usb_interface *intf)
                 dev_warn(&intf->dev, "rebind failed: %d\n", rc);
 }
 
+#ifdef CONFIG_PM
+
 #define DO_UNBIND       0
 #define DO_REBIND       1
 
@@ -872,8 +873,6 @@ static void do_unbind_rebind(struct usb_device *udev, int action)
         }
 }
 
-#ifdef CONFIG_PM
-
 /* Caller has locked udev's pm_mutex */
 static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
 {
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 586d6f1376cf..286b4431a097 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1091,8 +1091,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
                                 continue;
                         dev_dbg(&dev->dev, "unregistering interface %s\n",
                                 dev_name(&interface->dev));
-                        device_del(&interface->dev);
                         usb_remove_sysfs_intf_files(interface);
+                        device_del(&interface->dev);
                 }
 
                 /* Now that the interfaces are unbound, nobody should
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index c6a8c6b1116a..acc95b2ac6f8 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -284,6 +284,16 @@ config USB_LH7A40X
         default USB_GADGET
         select USB_GADGET_SELECTED
 
+# built in ../musb along with host support
+config USB_GADGET_MUSB_HDRC
+        boolean "Inventra HDRC USB Peripheral (TI, ...)"
+        depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+        select USB_GADGET_DUALSPEED
+        select USB_GADGET_SELECTED
+        help
+          This OTG-capable silicon IP is used in dual designs including
+          the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.
+
 config USB_GADGET_OMAP
         boolean "OMAP USB Device Controller"
         depends on ARCH_OMAP
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 21d1406af9ee..7600a0c78753 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -542,13 +542,14 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
                 req->req.context = dum;
                 req->req.complete = fifo_complete;
 
+                list_add_tail(&req->queue, &ep->queue);
                 spin_unlock (&dum->lock);
                 _req->actual = _req->length;
                 _req->status = 0;
                 _req->complete (_ep, _req);
                 spin_lock (&dum->lock);
-        }
-        list_add_tail (&req->queue, &ep->queue);
+        }  else
+                list_add_tail(&req->queue, &ep->queue);
         spin_unlock_irqrestore (&dum->lock, flags);
 
         /* real hardware would likely enable transfers here, in case
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index d8faccf27895..5ee1590b8e9c 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -47,18 +47,37 @@ struct f_acm {
         u8                              ctrl_id, data_id;
         u8                              port_num;
 
-        struct usb_descriptor_header    **fs_function;
+        u8                              pending;
+
+        /* lock is mostly for pending and notify_req ... they get accessed
+         * by callbacks both from tty (open/close/break) under its spinlock,
+         * and notify_req.complete() which can't use that lock.
+         */
+        spinlock_t                      lock;
+
         struct acm_ep_descs             fs;
-        struct usb_descriptor_header    **hs_function;
         struct acm_ep_descs             hs;
 
         struct usb_ep                   *notify;
         struct usb_endpoint_descriptor  *notify_desc;
+        struct usb_request              *notify_req;
 
         struct usb_cdc_line_coding      port_line_coding;       /* 8-N-1 etc */
+
+        /* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */
         u16                             port_handshake_bits;
-#define RS232_RTS       (1 << 1)        /* unused with full duplex */
-#define RS232_DTR       (1 << 0)        /* host is ready for data r/w */
+#define ACM_CTRL_RTS    (1 << 1)        /* unused with full duplex */
+#define ACM_CTRL_DTR    (1 << 0)        /* host is ready for data r/w */
+
+        /* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */
+        u16                             serial_state;
+#define ACM_CTRL_OVERRUN        (1 << 6)
+#define ACM_CTRL_PARITY         (1 << 5)
+#define ACM_CTRL_FRAMING        (1 << 4)
+#define ACM_CTRL_RI             (1 << 3)
+#define ACM_CTRL_BRK            (1 << 2)
+#define ACM_CTRL_DSR            (1 << 1)
+#define ACM_CTRL_DCD            (1 << 0)
 };
 
 static inline struct f_acm *func_to_acm(struct usb_function *f)
@@ -66,12 +85,17 @@ static inline struct f_acm *func_to_acm(struct usb_function *f)
         return container_of(f, struct f_acm, port.func);
 }
 
+static inline struct f_acm *port_to_acm(struct gserial *p)
+{
+        return container_of(p, struct f_acm, port);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* notification endpoint uses smallish and infrequent fixed-size messages */
 
 #define GS_LOG2_NOTIFY_INTERVAL         5       /* 1 << 5 == 32 msec */
-#define GS_NOTIFY_MAXPACKET             8
+#define GS_NOTIFY_MAXPACKET             10      /* notification + 2 bytes */
 
 /* interface and class descriptors: */
 
@@ -117,7 +141,7 @@ static struct usb_cdc_acm_descriptor acm_descriptor __initdata = {
         .bLength =              sizeof(acm_descriptor),
         .bDescriptorType =      USB_DT_CS_INTERFACE,
         .bDescriptorSubType =   USB_CDC_ACM_TYPE,
-        .bmCapabilities =       (1 << 1),
+        .bmCapabilities =       USB_CDC_CAP_LINE,
 };
 
 static struct usb_cdc_union_desc acm_union_desc __initdata = {
@@ -277,6 +301,11 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 
         /* composite driver infrastructure handles everything except
          * CDC class messages; interface activation uses set_alt().
+         *
+         * Note CDC spec table 4 lists the ACM request profile.  It requires
+         * encapsulated command support ... we don't handle any, and respond
+         * to them by stalling.  Options include get/set/clear comm features
+         * (not that useful) and SEND_BREAK.
          */
         switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
 
@@ -312,7 +341,7 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
                 value = 0;
 
                 /* FIXME we should not allow data to flow until the
-                 * host sets the RS232_DTR bit; and when it clears
+                 * host sets the ACM_CTRL_DTR bit; and when it clears
                  * that bit, we should return to that no-flow state.
                  */
                 acm->port_handshake_bits = w_value;
@@ -350,9 +379,6 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
         /* we know alt == 0, so this is an activation or a reset */
 
         if (intf == acm->ctrl_id) {
-                /* REVISIT this may need more work when we start to
-                 * send notifications ...
-                 */
                 if (acm->notify->driver_data) {
                         VDBG(cdev, "reset acm control interface %d\n", intf);
                         usb_ep_disable(acm->notify);
@@ -397,6 +423,128 @@ static void acm_disable(struct usb_function *f)
 
 /*-------------------------------------------------------------------------*/
 
+/**
+ * acm_cdc_notify - issue CDC notification to host
+ * @acm: wraps host to be notified
+ * @type: notification type
+ * @value: Refer to cdc specs, wValue field.
+ * @data: data to be sent
+ * @length: size of data
+ * Context: irqs blocked, acm->lock held, acm_notify_req non-null
+ *
+ * Returns zero on sucess or a negative errno.
+ *
+ * See section 6.3.5 of the CDC 1.1 specification for information
+ * about the only notification we issue:  SerialState change.
+ */
+static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
+                void *data, unsigned length)
+{
+        struct usb_ep                   *ep = acm->notify;
+        struct usb_request              *req;
+        struct usb_cdc_notification     *notify;
+        const unsigned                  len = sizeof(*notify) + length;
+        void                            *buf;
+        int                             status;
+
+        req = acm->notify_req;
+        acm->notify_req = NULL;
+        acm->pending = false;
+
+        req->length = len;
+        notify = req->buf;
+        buf = notify + 1;
+
+        notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS
+                        | USB_RECIP_INTERFACE;
+        notify->bNotificationType = type;
+        notify->wValue = cpu_to_le16(value);
+        notify->wIndex = cpu_to_le16(acm->ctrl_id);
+        notify->wLength = cpu_to_le16(length);
+        memcpy(buf, data, length);
+
+        status = usb_ep_queue(ep, req, GFP_ATOMIC);
+        if (status < 0) {
+                ERROR(acm->port.func.config->cdev,
+                                "acm ttyGS%d can't notify serial state, %d\n",
+                                acm->port_num, status);
+                acm->notify_req = req;
+        }
+
+        return status;
+}
+
+static int acm_notify_serial_state(struct f_acm *acm)
+{
+        struct usb_composite_dev *cdev = acm->port.func.config->cdev;
+        int                     status;
+
+        spin_lock(&acm->lock);
+        if (acm->notify_req) {
+                DBG(cdev, "acm ttyGS%d serial state %04x\n",
+                                acm->port_num, acm->serial_state);
+                status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
+                                0, &acm->serial_state, sizeof(acm->serial_state));
+        } else {
+                acm->pending = true;
+                status = 0;
+        }
+        spin_unlock(&acm->lock);
+        return status;
+}
+
+static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+        struct f_acm            *acm = req->context;
+        u8                      doit = false;
+
+        /* on this call path we do NOT hold the port spinlock,
+         * which is why ACM needs its own spinlock
+         */
+        spin_lock(&acm->lock);
+        if (req->status != -ESHUTDOWN)
+                doit = acm->pending;
+        acm->notify_req = req;
+        spin_unlock(&acm->lock);
+
+        if (doit)
+                acm_notify_serial_state(acm);
+}
+
+/* connect == the TTY link is open */
+
+static void acm_connect(struct gserial *port)
+{
+        struct f_acm            *acm = port_to_acm(port);
+
+        acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD;
+        acm_notify_serial_state(acm);
+}
+
+static void acm_disconnect(struct gserial *port)
+{
+        struct f_acm            *acm = port_to_acm(port);
+
+        acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD);
+        acm_notify_serial_state(acm);
+}
+
+static int acm_send_break(struct gserial *port, int duration)
+{
+        struct f_acm            *acm = port_to_acm(port);
+        u16                     state;
+
+        state = acm->serial_state;
+        state &= ~ACM_CTRL_BRK;
+        if (duration)
+                state |= ACM_CTRL_BRK;
+
+        acm->serial_state = state;
+        return acm_notify_serial_state(acm);
+}
+
+/*-------------------------------------------------------------------------*/
+
 /* ACM function driver setup/binding */
 static int __init
 acm_bind(struct usb_configuration *c, struct usb_function *f)
@@ -445,8 +593,20 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
         acm->notify = ep;
         ep->driver_data = cdev; /* claim */
 
+        /* allocate notification */
+        acm->notify_req = gs_alloc_req(ep,
+                        sizeof(struct usb_cdc_notification) + 2,
+                        GFP_KERNEL);
+        if (!acm->notify_req)
+                goto fail;
+
+        acm->notify_req->complete = acm_cdc_notify_complete;
+        acm->notify_req->context = acm;
+
         /* copy descriptors, and track endpoint copies */
         f->descriptors = usb_copy_descriptors(acm_fs_function);
+        if (!f->descriptors)
+                goto fail;
 
         acm->fs.in = usb_find_endpoint(acm_fs_function,
                         f->descriptors, &acm_fs_in_desc);
@@ -478,8 +638,6 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
                                 f->hs_descriptors, &acm_hs_notify_desc);
         }
 
-        /* FIXME provide a callback for triggering notifications */
-
         DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
                         acm->port_num,
                         gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
@@ -488,6 +646,9 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
         return 0;
 
 fail:
+        if (acm->notify_req)
+                gs_free_req(acm->notify, acm->notify_req);
+
         /* we might as well release our claims on endpoints */
         if (acm->notify)
                 acm->notify->driver_data = NULL;
@@ -504,10 +665,13 @@ fail:
 static void
 acm_unbind(struct usb_configuration *c, struct usb_function *f)
 {
+        struct f_acm            *acm = func_to_acm(f);
+
         if (gadget_is_dualspeed(c->cdev->gadget))
                 usb_free_descriptors(f->hs_descriptors);
         usb_free_descriptors(f->descriptors);
-        kfree(func_to_acm(f));
+        gs_free_req(acm->notify, acm->notify_req);
+        kfree(acm);
 }
 
 /* Some controllers can't support CDC ACM ... */
@@ -571,8 +735,14 @@ int __init acm_bind_config(struct usb_configuration *c, u8 port_num)
         if (!acm)
                 return -ENOMEM;
 
+        spin_lock_init(&acm->lock);
+
         acm->port_num = port_num;
 
+        acm->port.connect = acm_connect;
+        acm->port.disconnect = acm_disconnect;
+        acm->port.send_break = acm_send_break;
+
         acm->port.func.name = "acm";
         acm->port.func.strings = acm_strings;
         /* descriptors are per-instance copies */
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 0822e9d7693a..a2b5c092bda0 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -63,9 +63,7 @@ struct f_ecm {
 
         char                            ethaddr[14];
 
-        struct usb_descriptor_header    **fs_function;
         struct ecm_ep_descs             fs;
-        struct usb_descriptor_header    **hs_function;
         struct ecm_ep_descs             hs;
 
         struct usb_ep                   *notify;
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 61652f0f13fd..659b3d9671c4 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -85,9 +85,7 @@ struct f_rndis {
         u8                              ethaddr[ETH_ALEN];
         int                             config;
 
-        struct usb_descriptor_header    **fs_function;
         struct rndis_ep_descs           fs;
-        struct usb_descriptor_header    **hs_function;
         struct rndis_ep_descs           hs;
 
         struct usb_ep                   *notify;
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 1b6bde9aaed5..fe5674db344b 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -36,9 +36,7 @@ struct f_gser {
         u8                              data_id;
         u8                              port_num;
 
-        struct usb_descriptor_header    **fs_function;
         struct gser_descs               fs;
-        struct usb_descriptor_header    **hs_function;
         struct gser_descs               hs;
 };
 
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index afeab9a0523f..acb8d233aa1d 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -66,9 +66,7 @@ struct f_gether {
 
         char                            ethaddr[14];
 
-        struct usb_descriptor_header    **fs_function;
         struct geth_descs               fs;
-        struct usb_descriptor_header    **hs_function;
         struct geth_descs               hs;
 };
 
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 5246e8fef2b2..17d9905101b7 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -11,6 +11,10 @@
  * Some are available on 2.4 kernels; several are available, but not
  * yet pushed in the 2.6 mainline tree.
  */
+
+#ifndef __GADGET_CHIPS_H
+#define __GADGET_CHIPS_H
+
 #ifdef CONFIG_USB_GADGET_NET2280
 #define gadget_is_net2280(g)    !strcmp("net2280", (g)->name)
 #else
@@ -237,3 +241,5 @@ static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
         /* Everything else is *presumably* fine ... */
         return true;
 }
+
+#endif /* __GADGET_CHIPS_H */
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 376e80c07530..574c53831a05 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -54,6 +54,7 @@
 
 #include <mach/dma.h>
 #include <mach/usb.h>
+#include <mach/control.h>
 
 #include "omap_udc.h"
 
@@ -2310,10 +2311,10 @@ static int proc_otg_show(struct seq_file *s)
         u32             trans;
         char            *ctrl_name;
 
-        tmp = OTG_REV_REG;
+        tmp = omap_readl(OTG_REV);
         if (cpu_is_omap24xx()) {
                 ctrl_name = "control_devconf";
-                trans = CONTROL_DEVCONF_REG;
+                trans = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
         } else {
                 ctrl_name = "tranceiver_ctrl";
                 trans = omap_readw(USB_TRANSCEIVER_CTRL);
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index abf9505d3a75..53d59287f2bc 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -52,13 +52,16 @@
  * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
  */
 
+#define PREFIX  "ttyGS"
+
 /*
  * gserial is the lifecycle interface, used by USB functions
  * gs_port is the I/O nexus, used by the tty driver
  * tty_struct links to the tty/filesystem framework
  *
  * gserial <---> gs_port ... links will be null when the USB link is
- * inactive; managed by gserial_{connect,disconnect}().
+ * inactive; managed by gserial_{connect,disconnect}().  each gserial
+ * instance can wrap its own USB control protocol.
  *      gserial->ioport == usb_ep->driver_data ... gs_port
  *      gs_port->port_usb ... gserial
  *
@@ -100,6 +103,8 @@ struct gs_port {
         wait_queue_head_t       close_wait;     /* wait for last close */
 
         struct list_head        read_pool;
+        struct list_head        read_queue;
+        unsigned                n_read;
         struct tasklet_struct   push;
 
         struct list_head        write_pool;
@@ -177,7 +182,7 @@ static void gs_buf_clear(struct gs_buf *gb)
 /*
  * gs_buf_data_avail
  *
- * Return the number of bytes of data available in the circular
+ * Return the number of bytes of data written into the circular
  * buffer.
  */
 static unsigned gs_buf_data_avail(struct gs_buf *gb)
@@ -278,7 +283,7 @@ gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
  * Allocate a usb_request and its buffer.  Returns a pointer to the
  * usb_request or NULL if there is an error.
  */
-static struct usb_request *
+struct usb_request *
 gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
 {
         struct usb_request *req;
@@ -302,7 +307,7 @@ gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
  *
  * Free a usb_request and its buffer.
  */
-static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+void gs_free_req(struct usb_ep *ep, struct usb_request *req)
 {
         kfree(req->buf);
         usb_ep_free_request(ep, req);
@@ -367,11 +372,9 @@ __acquires(&port->port_lock)
                 req->length = len;
                 list_del(&req->list);
 
-#ifdef VERBOSE_DEBUG
-                pr_debug("%s: %s, len=%d, 0x%02x 0x%02x 0x%02x ...\n",
-                                __func__, in->name, len, *((u8 *)req->buf),
+                pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
+                                port->port_num, len, *((u8 *)req->buf),
                                 *((u8 *)req->buf+1), *((u8 *)req->buf+2));
-#endif
 
                 /* Drop lock while we call out of driver; completions
                  * could be issued while we do so.  Disconnection may
@@ -401,56 +404,6 @@ __acquires(&port->port_lock)
         return status;
 }
 
-static void gs_rx_push(unsigned long _port)
-{
-        struct gs_port          *port = (void *)_port;
-        struct tty_struct       *tty = port->port_tty;
-
-        /* With low_latency, tty_flip_buffer_push() doesn't put its
-         * real work through a workqueue, so the ldisc has a better
-         * chance to keep up with peak USB data rates.
-         */
-        if (tty) {
-                tty_flip_buffer_push(tty);
-                wake_up_interruptible(&tty->read_wait);
-        }
-}
-
-/*
- * gs_recv_packet
- *
- * Called for each USB packet received.  Reads the packet
- * header and stuffs the data in the appropriate tty buffer.
- * Returns 0 if successful, or a negative error number.
- *
- * Called during USB completion routine, on interrupt time.
- * With port_lock.
- */
-static int gs_recv_packet(struct gs_port *port, char *packet, unsigned size)
-{
-        unsigned                len;
-        struct tty_struct       *tty;
-
-        /* I/O completions can continue for a while after close(), until the
-         * request queue empties.  Just discard any data we receive, until
-         * something reopens this TTY ... as if there were no HW flow control.
-         */
-        tty = port->port_tty;
-        if (tty == NULL) {
-                pr_vdebug("%s: ttyGS%d, after close\n",
-                                __func__, port->port_num);
-                return -EIO;
-        }
-
-        len = tty_insert_flip_string(tty, packet, size);
-        if (len > 0)
-                tasklet_schedule(&port->push);
-        if (len < size)
-                pr_debug("%s: ttyGS%d, drop %d bytes\n",
-                                __func__, port->port_num, size - len);
-        return 0;
-}
-
 /*
  * Context: caller owns port_lock, and port_usb is set
  */
@@ -469,9 +422,9 @@ __acquires(&port->port_lock)
                 int                     status;
                 struct tty_struct       *tty;
 
-                /* no more rx if closed or throttled */
+                /* no more rx if closed */
                 tty = port->port_tty;
-                if (!tty || test_bit(TTY_THROTTLED, &tty->flags))
+                if (!tty)
                         break;
 
                 req = list_entry(pool->next, struct usb_request, list);
@@ -500,36 +453,134 @@ __acquires(&port->port_lock)
         return started;
 }
 
-static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+/*
+ * RX tasklet takes data out of the RX queue and hands it up to the TTY
+ * layer until it refuses to take any more data (or is throttled back).
+ * Then it issues reads for any further data.
+ *
+ * If the RX queue becomes full enough that no usb_request is queued,
+ * the OUT endpoint may begin NAKing as soon as its FIFO fills up.
+ * So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
+ * can be buffered before the TTY layer's buffers (currently 64 KB).
+ */
+static void gs_rx_push(unsigned long _port)
 {
-        int             status;
-        struct gs_port  *port = ep->driver_data;
+        struct gs_port          *port = (void *)_port;
+        struct tty_struct       *tty;
+        struct list_head        *queue = &port->read_queue;
+        bool                    disconnect = false;
+        bool                    do_push = false;
 
-        spin_lock(&port->port_lock);
-        list_add(&req->list, &port->read_pool);
+        /* hand any queued data to the tty */
+        spin_lock_irq(&port->port_lock);
+        tty = port->port_tty;
+        while (!list_empty(queue)) {
+                struct usb_request      *req;
 
-        switch (req->status) {
-        case 0:
-                /* normal completion */
-                status = gs_recv_packet(port, req->buf, req->actual);
-                if (status && status != -EIO)
-                        pr_debug("%s: %s %s err %d\n",
-                                __func__, "recv", ep->name, status);
-                gs_start_rx(port);
-                break;
+                req = list_first_entry(queue, struct usb_request, list);
 
-        case -ESHUTDOWN:
-                /* disconnect */
-                pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
-                break;
+                /* discard data if tty was closed */
+                if (!tty)
+                        goto recycle;
 
-        default:
-                /* presumably a transient fault */
-                pr_warning("%s: unexpected %s status %d\n",
-                                __func__, ep->name, req->status);
-                gs_start_rx(port);
-                break;
+                /* leave data queued if tty was rx throttled */
+                if (test_bit(TTY_THROTTLED, &tty->flags))
+                        break;
+
+                switch (req->status) {
+                case -ESHUTDOWN:
+                        disconnect = true;
+                        pr_vdebug(PREFIX "%d: shutdown\n", port->port_num);
+                        break;
+
+                default:
+                        /* presumably a transient fault */
+                        pr_warning(PREFIX "%d: unexpected RX status %d\n",
+                                        port->port_num, req->status);
+                        /* FALLTHROUGH */
+                case 0:
+                        /* normal completion */
+                        break;
+                }
+
+                /* push data to (open) tty */
+                if (req->actual) {
+                        char            *packet = req->buf;
+                        unsigned        size = req->actual;
+                        unsigned        n;
+                        int             count;
+
+                        /* we may have pushed part of this packet already... */
+                        n = port->n_read;
+                        if (n) {
+                                packet += n;
+                                size -= n;
+                        }
+
+                        count = tty_insert_flip_string(tty, packet, size);
+                        if (count)
+                                do_push = true;
+                        if (count != size) {
+                                /* stop pushing; TTY layer can't handle more */
+                                port->n_read += count;
+                                pr_vdebug(PREFIX "%d: rx block %d/%d\n",
+                                                port->port_num,
+                                                count, req->actual);
+                                break;
+                        }
+                        port->n_read = 0;
+                }
+recycle:
+                list_move(&req->list, &port->read_pool);
         }
+
+        /* Push from tty to ldisc; this is immediate with low_latency, and
+         * may trigger callbacks to this driver ... so drop the spinlock.
+         */
+        if (tty && do_push) {
+                spin_unlock_irq(&port->port_lock);
+                tty_flip_buffer_push(tty);
+                wake_up_interruptible(&tty->read_wait);
+                spin_lock_irq(&port->port_lock);
+
+                /* tty may have been closed */
+                tty = port->port_tty;
+        }
+
+
+        /* We want our data queue to become empty ASAP, keeping data
+         * in the tty and ldisc (not here).  If we couldn't push any
+         * this time around, there may be trouble unless there's an
+         * implicit tty_unthrottle() call on its way...
+         *
+         * REVISIT we should probably add a timer to keep the tasklet
+         * from starving ... but it's not clear that case ever happens.
+         */
+        if (!list_empty(queue) && tty) {
+                if (!test_bit(TTY_THROTTLED, &tty->flags)) {
+                        if (do_push)
+                                tasklet_schedule(&port->push);
+                        else
+                                pr_warning(PREFIX "%d: RX not scheduled?\n",
+                                        port->port_num);
+                }
+        }
+
+        /* If we're still connected, refill the USB RX queue. */
+        if (!disconnect && port->port_usb)
+                gs_start_rx(port);
+
+        spin_unlock_irq(&port->port_lock);
+}
+
+static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+{
+        struct gs_port  *port = ep->driver_data;
+
+        /* Queue all received data until the tty layer is ready for it. */
+        spin_lock(&port->port_lock);
+        list_add_tail(&req->list, &port->read_queue);
+        tasklet_schedule(&port->push);
         spin_unlock(&port->port_lock);
 }
 
@@ -625,6 +676,7 @@ static int gs_start_io(struct gs_port *port)
         }
 
         /* queue read requests */
+        port->n_read = 0;
         started = gs_start_rx(port);
 
         /* unblock any pending writes into our circular buffer */
@@ -633,9 +685,10 @@ static int gs_start_io(struct gs_port *port)
         } else {
                 gs_free_requests(ep, head);
                 gs_free_requests(port->port_usb->in, &port->write_pool);
+                status = -EIO;
         }
 
-        return started ? 0 : status;
+        return status;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -736,10 +789,13 @@ static int gs_open(struct tty_struct *tty, struct file *file)
 
         /* if connected, start the I/O stream */
         if (port->port_usb) {
+                struct gserial  *gser = port->port_usb;
+
                 pr_debug("gs_open: start ttyGS%d\n", port->port_num);
                 gs_start_io(port);
 
-                /* REVISIT for ACM, issue "network connected" event */
+                if (gser->connect)
+                        gser->connect(gser);
         }
 
         pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
@@ -766,6 +822,7 @@ static int gs_writes_finished(struct gs_port *p)
 static void gs_close(struct tty_struct *tty, struct file *file)
 {
         struct gs_port *port = tty->driver_data;
+        struct gserial  *gser;
 
         spin_lock_irq(&port->port_lock);
 
@@ -785,32 +842,31 @@ static void gs_close(struct tty_struct *tty, struct file *file)
         port->openclose = true;
         port->open_count = 0;
 
-        if (port->port_usb)
-                /* REVISIT for ACM, issue "network disconnected" event */;
+        gser = port->port_usb;
+        if (gser && gser->disconnect)
+                gser->disconnect(gser);
 
         /* wait for circular write buffer to drain, disconnect, or at
          * most GS_CLOSE_TIMEOUT seconds; then discard the rest
          */
-        if (gs_buf_data_avail(&port->port_write_buf) > 0
-                        && port->port_usb) {
+        if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
                 spin_unlock_irq(&port->port_lock);
                 wait_event_interruptible_timeout(port->drain_wait,
                                         gs_writes_finished(port),
                                         GS_CLOSE_TIMEOUT * HZ);
                 spin_lock_irq(&port->port_lock);
+                gser = port->port_usb;
         }
 
         /* Iff we're disconnected, there can be no I/O in flight so it's
          * ok to free the circular buffer; else just scrub it.  And don't
          * let the push tasklet fire again until we're re-opened.
          */
-        if (port->port_usb == NULL)
+        if (gser == NULL)
                 gs_buf_free(&port->port_write_buf);
         else
                 gs_buf_clear(&port->port_write_buf);
 
-        tasklet_kill(&port->push);
-
         tty->driver_data = NULL;
         port->port_tty = NULL;
 
@@ -911,15 +967,35 @@ static void gs_unthrottle(struct tty_struct *tty)
 {
         struct gs_port          *port = tty->driver_data;
         unsigned long           flags;
-        unsigned                started = 0;
 
         spin_lock_irqsave(&port->port_lock, flags);
-        if (port->port_usb)
-                started = gs_start_rx(port);
+        if (port->port_usb) {
+                /* Kickstart read queue processing.  We don't do xon/xoff,
+                 * rts/cts, or other handshaking with the host, but if the
+                 * read queue backs up enough we'll be NAKing OUT packets.
+                 */
+                tasklet_schedule(&port->push);
+                pr_vdebug(PREFIX "%d: unthrottle\n", port->port_num);
+        }
         spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static int gs_break_ctl(struct tty_struct *tty, int duration)
+{
+        struct gs_port  *port = tty->driver_data;
+        int             status = 0;
+        struct gserial  *gser;
+
+        pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n",
+                        port->port_num, duration);
 
-        pr_vdebug("gs_unthrottle: ttyGS%d, %d packets\n",
-                        port->port_num, started);
+        spin_lock_irq(&port->port_lock);
+        gser = port->port_usb;
+        if (gser && gser->send_break)
+                status = gser->send_break(gser, duration);
+        spin_unlock_irq(&port->port_lock);
+
+        return status;
 }
 
 static const struct tty_operations gs_tty_ops = {
@@ -931,6 +1007,7 @@ static const struct tty_operations gs_tty_ops = {
         .write_room =           gs_write_room,
         .chars_in_buffer =      gs_chars_in_buffer,
         .unthrottle =           gs_unthrottle,
+        .break_ctl =            gs_break_ctl,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -953,6 +1030,7 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
         tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
 
         INIT_LIST_HEAD(&port->read_pool);
+        INIT_LIST_HEAD(&port->read_queue);
         INIT_LIST_HEAD(&port->write_pool);
 
         port->port_num = port_num;
@@ -997,7 +1075,7 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count)
 
         gs_tty_driver->owner = THIS_MODULE;
         gs_tty_driver->driver_name = "g_serial";
-        gs_tty_driver->name = "ttyGS";
+        gs_tty_driver->name = PREFIX;
         /* uses dynamically assigned dev_t values */
 
         gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
@@ -1104,6 +1182,8 @@ void gserial_cleanup(void)
                 ports[i].port = NULL;
                 mutex_unlock(&ports[i].lock);
 
+                tasklet_kill(&port->push);
+
                 /* wait for old opens to finish */
                 wait_event(port->close_wait, gs_closed(port));
 
@@ -1175,14 +1255,17 @@ int gserial_connect(struct gserial *gser, u8 port_num)
 
         /* REVISIT if waiting on "carrier detect", signal. */
 
-        /* REVISIT for ACM, issue "network connection" status notification:
-         * connected if open_count, else disconnected.
+        /* if it's already open, start I/O ... and notify the serial
+         * protocol about open/close status (connect/disconnect).
          */
-
-        /* if it's already open, start I/O */
         if (port->open_count) {
                 pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
                 gs_start_io(port);
+                if (gser->connect)
+                        gser->connect(gser);
+        } else {
+                if (gser->disconnect)
+                        gser->disconnect(gser);
         }
 
         spin_unlock_irqrestore(&port->port_lock, flags);
@@ -1241,6 +1324,7 @@ void gserial_disconnect(struct gserial *gser)
         if (port->open_count == 0 && !port->openclose)
                 gs_buf_free(&port->port_write_buf);
         gs_free_requests(gser->out, &port->read_pool);
+        gs_free_requests(gser->out, &port->read_queue);
         gs_free_requests(gser->in, &port->write_pool);
         spin_unlock_irqrestore(&port->port_lock, flags);
 }
diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h
index 7b561138f90e..af3910d01aea 100644
--- a/drivers/usb/gadget/u_serial.h
+++ b/drivers/usb/gadget/u_serial.h
@@ -23,8 +23,7 @@
  * style I/O using the USB peripheral endpoints listed here, including
  * hookups to sysfs and /dev for each logical "tty" device.
  *
- * REVISIT need TTY --> USB event flow too, so ACM can report open/close
- * as carrier detect events.  Model after ECM.  There's more ACM state too.
+ * REVISIT at least ACM could support tiocmget() if needed.
  *
  * REVISIT someday, allow multiplexing several TTYs over these endpoints.
  */
@@ -41,8 +40,17 @@ struct gserial {
 
         /* REVISIT avoid this CDC-ACM support harder ... */
         struct usb_cdc_line_coding port_line_coding;    /* 9600-8-N-1 etc */
+
+        /* notification callbacks */
+        void (*connect)(struct gserial *p);
+        void (*disconnect)(struct gserial *p);
+        int (*send_break)(struct gserial *p, int duration);
 };
 
+/* utilities to allocate/free request and buffer */
+struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags);
+void gs_free_req(struct usb_ep *, struct usb_request *req);
+
 /* port setup/teardown is handled by gadget driver */
 int gserial_setup(struct usb_gadget *g, unsigned n_ports);
 void gserial_cleanup(void);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 5fbdc14e63b3..5416cf969005 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mbus.h>
-#include <asm/plat-orion/ehci-orion.h>
+#include <plat/ehci-orion.h>
 
 #define rdl(off)        __raw_readl(hcd->regs + (off))
 #define wrl(off, val)   __raw_writel((val), hcd->regs + (off))
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index c858f2adb929..d22a84f86a33 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -126,9 +126,8 @@ static void isp1760_writel(const unsigned int val, __u32 __iomem *regs)
  * doesn't quite work because some people have to enforce 32-bit access
  */
 static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
-                __u32 __iomem *dst, u32 offset, u32 len)
+                __u32 __iomem *dst, u32 len)
 {
-        struct usb_hcd *hcd = priv_to_hcd(priv);
         u32 val;
         u8 *buff8;
 
@@ -136,11 +135,6 @@ static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
                 printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len);
                 return;
         }
-        isp1760_writel(offset,  hcd->regs + HC_MEMORY_REG);
-        /* XXX
-         * 90nsec delay, the spec says something how this could be avoided.
-         */
-        mdelay(1);
 
         while (len >= 4) {
                 *src = __raw_readl(dst);
@@ -987,8 +981,20 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
                         printk(KERN_ERR "qh is 0\n");
                         continue;
                 }
-                priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs,
-                                atl_regs, sizeof(ptd));
+                isp1760_writel(atl_regs + ISP_BANK(0), usb_hcd->regs +
+                                HC_MEMORY_REG);
+                isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+                                HC_MEMORY_REG);
+                /*
+                 * write bank1 address twice to ensure the 90ns delay (time
+                 * between BANK0 write and the priv_read_copy() call is at
+                 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
+                 */
+                isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+                                HC_MEMORY_REG);
+
+                priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs +
+                                ISP_BANK(0), sizeof(ptd));
 
                 dw1 = le32_to_cpu(ptd.dw1);
                 dw2 = le32_to_cpu(ptd.dw2);
@@ -1091,7 +1097,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
                         case IN_PID:
                                 priv_read_copy(priv,
                                         priv->atl_ints[queue_entry].data_buffer,
-                                        usb_hcd->regs + payload, payload,
+                                        usb_hcd->regs + payload + ISP_BANK(1),
                                         length);
 
                         case OUT_PID:
@@ -1122,11 +1128,11 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
                 } else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) {
                         /* short BULK received */
 
-                        printk(KERN_ERR "short bulk, %d instead %zu\n", length,
-                                        qtd->length);
                         if (urb->transfer_flags & URB_SHORT_NOT_OK) {
                                 urb->status = -EREMOTEIO;
-                                printk(KERN_ERR "not okey\n");
+                                isp1760_dbg(priv, "short bulk, %d instead %zu "
+                                        "with URB_SHORT_NOT_OK flag.\n",
+                                        length, qtd->length);
                         }
 
                         if (urb->status == -EINPROGRESS)
@@ -1206,8 +1212,20 @@ static void do_intl_int(struct usb_hcd *usb_hcd)
                         continue;
                 }
 
-                priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs,
-                                int_regs, sizeof(ptd));
+                isp1760_writel(int_regs + ISP_BANK(0), usb_hcd->regs +
+                                HC_MEMORY_REG);
+                isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+                                HC_MEMORY_REG);
+                /*
+                 * write bank1 address twice to ensure the 90ns delay (time
+                 * between BANK0 write and the priv_read_copy() call is at
+                 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
+                 */
+                isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+                                HC_MEMORY_REG);
+
+                priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs +
+                                ISP_BANK(0), sizeof(ptd));
                 dw1 = le32_to_cpu(ptd.dw1);
                 dw3 = le32_to_cpu(ptd.dw3);
                 check_int_err_status(le32_to_cpu(ptd.dw4));
@@ -1242,7 +1260,7 @@ static void do_intl_int(struct usb_hcd *usb_hcd)
                         case IN_PID:
                                 priv_read_copy(priv,
                                         priv->int_ints[queue_entry].data_buffer,
-                                        usb_hcd->regs + payload , payload,
+                                        usb_hcd->regs + payload + ISP_BANK(1),
                                         length);
                         case OUT_PID:
 
@@ -1615,8 +1633,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
                 return -EPIPE;
         }
 
-        isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
-        return 0;
+        return isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
 }
 
 static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 6473dd86993c..4377277667d9 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -54,6 +54,8 @@ void deinit_kmem_cache(void);
 #define BUFFER_MAP              0x7
 
 #define HC_MEMORY_REG           0x33c
+#define ISP_BANK(x)             ((x) << 16)
+
 #define HC_PORT1_CTRL           0x374
 #define PORT1_POWER             (3 << 3)
 #define PORT1_INIT1             (1 << 7)
@@ -119,6 +121,9 @@ struct inter_packet_info {
 typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
                 struct isp1760_qtd *qtd);
 
+#define isp1760_dbg(priv, fmt, args...) \
+        dev_dbg(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
 #define isp1760_info(priv, fmt, args...) \
         dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args)
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 26bc47941d01..89901962cbfd 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -86,6 +86,21 @@ static void ohci_stop (struct usb_hcd *hcd);
 static int ohci_restart (struct ohci_hcd *ohci);
 #endif
 
+#ifdef CONFIG_PCI
+static void quirk_amd_pll(int state);
+static void amd_iso_dev_put(void);
+#else
+static inline void quirk_amd_pll(int state)
+{
+        return;
+}
+static inline void amd_iso_dev_put(void)
+{
+        return;
+}
+#endif
+
+
 #include "ohci-hub.c"
 #include "ohci-dbg.c"
 #include "ohci-mem.c"
@@ -483,6 +498,9 @@ static int ohci_init (struct ohci_hcd *ohci)
         int ret;
         struct usb_hcd *hcd = ohci_to_hcd(ohci);
 
+        if (distrust_firmware)
+                ohci->flags |= OHCI_QUIRK_HUB_POWER;
+
         disable (ohci);
         ohci->regs = hcd->regs;
 
@@ -689,7 +707,8 @@ retry:
                 temp |= RH_A_NOCP;
                 temp &= ~(RH_A_POTPGT | RH_A_NPS);
                 ohci_writel (ohci, temp, &ohci->regs->roothub.a);
-        } else if ((ohci->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
+        } else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
+                        (ohci->flags & OHCI_QUIRK_HUB_POWER)) {
                 /* hub power always on; required for AMD-756 and some
                  * Mac platforms.  ganged overcurrent reporting, if any.
                  */
@@ -882,6 +901,8 @@ static void ohci_stop (struct usb_hcd *hcd)
 
         if (quirk_zfmicro(ohci))
                 del_timer(&ohci->unlink_watchdog);
+        if (quirk_amdiso(ohci))
+                amd_iso_dev_put();
 
         remove_debug_files (ohci);
         ohci_mem_cleanup (ohci);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index b56739221d11..439beb784f3e 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -483,6 +483,13 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
                 length++;
         }
 
+        /* Some broken controllers never turn off RHCS in the interrupt
+         * status register.  For their sake we won't re-enable RHSC
+         * interrupts if the flag is already set.
+         */
+        if (ohci_readl(ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC)
+                changed = 1;
+
         /* look at each port */
         for (i = 0; i < ohci->num_ports; i++) {
                 u32     status = roothub_portstatus (ohci, i);
@@ -572,8 +579,6 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
         return 0;
 }
 
-static void start_hnp(struct ohci_hcd *ohci);
-
 #else
 
 #define ohci_start_port_reset           NULL
@@ -760,7 +765,7 @@ static int ohci_hub_control (
 #ifdef  CONFIG_USB_OTG
                         if (hcd->self.otg_port == (wIndex + 1)
                                         && hcd->self.b_hnp_enable)
-                                start_hnp(ohci);
+                                ohci->start_hnp(ohci);
                         else
 #endif
                         ohci_writel (ohci, RH_PS_PSS,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 94dfca02f7e1..3d532b709670 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -225,6 +225,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
                         dev_err(hcd->self.controller, "can't find transceiver\n");
                         return -ENODEV;
                 }
+                ohci->start_hnp = start_hnp;
         }
 #endif
 
@@ -260,7 +261,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
                         omap_cfg_reg(W4_USB_HIGHZ);
                 }
                 ohci_writel(ohci, rh, &ohci->regs->roothub.a);
-                distrust_firmware = 0;
+                ohci->flags &= ~OHCI_QUIRK_HUB_POWER;
         } else if (machine_is_nokia770()) {
                 /* We require a self-powered hub, which should have
                  * plenty of power. */
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 4696cc912e16..083e8df0a817 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -18,6 +18,28 @@
 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
 #endif
 
+#include <linux/pci.h>
+#include <linux/io.h>
+
+
+/* constants used to work around PM-related transfer
+ * glitches in some AMD 700 series southbridges
+ */
+#define AB_REG_BAR      0xf0
+#define AB_INDX(addr)   ((addr) + 0x00)
+#define AB_DATA(addr)   ((addr) + 0x04)
+#define AX_INDXC        0X30
+#define AX_DATAC        0x34
+
+#define NB_PCIE_INDX_ADDR       0xe0
+#define NB_PCIE_INDX_DATA       0xe4
+#define PCIE_P_CNTL             0x10040
+#define BIF_NB                  0x10002
+
+static struct pci_dev *amd_smbus_dev;
+static struct pci_dev *amd_hb_dev;
+static int amd_ohci_iso_count;
+
 /*-------------------------------------------------------------------------*/
 
 static int broken_suspend(struct usb_hcd *hcd)
@@ -143,6 +165,103 @@ static int ohci_quirk_nec(struct usb_hcd *hcd)
         return 0;
 }
 
+static int ohci_quirk_amd700(struct usb_hcd *hcd)
+{
+        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+        u8 rev = 0;
+
+        if (!amd_smbus_dev)
+                amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+                                PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+        if (!amd_smbus_dev)
+                return 0;
+
+        pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+        if ((rev > 0x3b) || (rev < 0x30)) {
+                pci_dev_put(amd_smbus_dev);
+                amd_smbus_dev = NULL;
+                return 0;
+        }
+
+        amd_ohci_iso_count++;
+
+        if (!amd_hb_dev)
+                amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL);
+
+        ohci->flags |= OHCI_QUIRK_AMD_ISO;
+        ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n");
+
+        return 0;
+}
+
+/*
+ * The hardware normally enables the A-link power management feature, which
+ * lets the system lower the power consumption in idle states.
+ *
+ * Assume the system is configured to have USB 1.1 ISO transfers going
+ * to or from a USB device.  Without this quirk, that stream may stutter
+ * or have breaks occasionally.  For transfers going to speakers, this
+ * makes a very audible mess...
+ *
+ * That audio playback corruption is due to the audio stream getting
+ * interrupted occasionally when the link goes in lower power state
+ * This USB quirk prevents the link going into that lower power state
+ * during audio playback or other ISO operations.
+ */
+static void quirk_amd_pll(int on)
+{
+        u32 addr;
+        u32 val;
+        u32 bit = (on > 0) ? 1 : 0;
+
+        pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr);
+
+        /* BIT names/meanings are NDA-protected, sorry ... */
+
+        outl(AX_INDXC, AB_INDX(addr));
+        outl(0x40, AB_DATA(addr));
+        outl(AX_DATAC, AB_INDX(addr));
+        val = inl(AB_DATA(addr));
+        val &= ~((1 << 3) | (1 << 4) | (1 << 9));
+        val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9);
+        outl(val, AB_DATA(addr));
+
+        if (amd_hb_dev) {
+                addr = PCIE_P_CNTL;
+                pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+                pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+                val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
+                val |= bit | (bit << 3) | (bit << 12);
+                val |= ((!bit) << 4) | ((!bit) << 9);
+                pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+
+                addr = BIF_NB;
+                pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+                pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+                val &= ~(1 << 8);
+                val |= bit << 8;
+                pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+        }
+}
+
+static void amd_iso_dev_put(void)
+{
+        amd_ohci_iso_count--;
+        if (amd_ohci_iso_count == 0) {
+                if (amd_smbus_dev) {
+                        pci_dev_put(amd_smbus_dev);
+                        amd_smbus_dev = NULL;
+                }
+                if (amd_hb_dev) {
+                        pci_dev_put(amd_hb_dev);
+                        amd_hb_dev = NULL;
+                }
+        }
+
+}
+
 /* List of quirks for OHCI */
 static const struct pci_device_id ohci_pci_quirks[] = {
         {
@@ -181,6 +300,19 @@ static const struct pci_device_id ohci_pci_quirks[] = {
                 PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
                 .driver_data = (unsigned long) broken_suspend,
         },
+        {
+                PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
+                .driver_data = (unsigned long)ohci_quirk_amd700,
+        },
+        {
+                PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
+                .driver_data = (unsigned long)ohci_quirk_amd700,
+        },
+        {
+                PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
+                .driver_data = (unsigned long)ohci_quirk_amd700,
+        },
+
         /* FIXME for some of the early AMD 760 southbridges, OHCI
          * won't work at all.  blacklist them.
          */
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 6a9b4c557953..c2d80f80448b 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -49,6 +49,9 @@ __acquires(ohci->lock)
         switch (usb_pipetype (urb->pipe)) {
         case PIPE_ISOCHRONOUS:
                 ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--;
+                if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
+                                && quirk_amdiso(ohci))
+                        quirk_amd_pll(1);
                 break;
         case PIPE_INTERRUPT:
                 ohci_to_hcd(ohci)->self.bandwidth_int_reqs--;
@@ -677,6 +680,9 @@ static void td_submit_urb (
                                 data + urb->iso_frame_desc [cnt].offset,
                                 urb->iso_frame_desc [cnt].length, urb, cnt);
                 }
+                if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
+                                && quirk_amdiso(ohci))
+                        quirk_amd_pll(0);
                 periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0
                         && ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0;
                 break;
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index dc544ddc7849..faf622eafce7 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -371,6 +371,7 @@ struct ohci_hcd {
          * other external transceivers should be software-transparent
          */
         struct otg_transceiver  *transceiver;
+        void (*start_hnp)(struct ohci_hcd *ohci);
 
         /*
          * memory management for queue data structures
@@ -399,6 +400,8 @@ struct ohci_hcd {
 #define OHCI_QUIRK_ZFMICRO      0x20                    /* Compaq ZFMicro chipset*/
 #define OHCI_QUIRK_NEC          0x40                    /* lost interrupts */
 #define OHCI_QUIRK_FRAME_NO     0x80                    /* no big endian frame_no shift */
+#define OHCI_QUIRK_HUB_POWER    0x100                   /* distrust firmware power/oc setup */
+#define OHCI_QUIRK_AMD_ISO      0x200                   /* ISO transfers*/
         // there are also chip quirks/bugs in init logic
 
         struct work_struct      nec_work;       /* Worker for NEC quirk */
@@ -426,6 +429,10 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci)
 {
         return ohci->flags & OHCI_QUIRK_ZFMICRO;
 }
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+        return ohci->flags & OHCI_QUIRK_AMD_ISO;
+}
 #else
 static inline int quirk_nec(struct ohci_hcd *ohci)
 {
@@ -435,6 +442,10 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci)
 {
         return 0;
 }
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+        return 0;
+}
 #endif
 
 /* convert between an hcd pointer and the corresponding ohci_hcd */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index d5f02dddb120..ea7126f99cab 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -964,11 +964,34 @@ static void pipe_irq_disable(struct r8a66597 *r8a66597, u16 pipenum)
         disable_irq_nrdy(r8a66597, pipenum);
 }
 
+static void r8a66597_root_hub_start_polling(struct r8a66597 *r8a66597)
+{
+        mod_timer(&r8a66597->rh_timer,
+                        jiffies + msecs_to_jiffies(R8A66597_RH_POLL_TIME));
+}
+
+static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
+                                        int connect)
+{
+        struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+        rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
+        rh->scount = R8A66597_MAX_SAMPLING;
+        if (connect)
+                rh->port |= 1 << USB_PORT_FEAT_CONNECTION;
+        else
+                rh->port &= ~(1 << USB_PORT_FEAT_CONNECTION);
+        rh->port |= 1 << USB_PORT_FEAT_C_CONNECTION;
+
+        r8a66597_root_hub_start_polling(r8a66597);
+}
+
 /* this function must be called with interrupt disabled */
 static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
                                         u16 syssts)
 {
         if (syssts == SE0) {
+                r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
                 r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
                 return;
         }
@@ -1002,13 +1025,10 @@ static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597, int port)
 {
         struct r8a66597_device *dev = r8a66597->root_hub[port].dev;
 
-        r8a66597->root_hub[port].port &= ~(1 << USB_PORT_FEAT_CONNECTION);
-        r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_C_CONNECTION);
-
         disable_r8a66597_pipe_all(r8a66597, dev);
         free_usb_address(r8a66597, dev);
 
-        r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
+        start_root_hub_sampling(r8a66597, port, 0);
 }
 
 /* this function must be called with interrupt disabled */
@@ -1551,23 +1571,6 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
         }
 }
 
-static void r8a66597_root_hub_start_polling(struct r8a66597 *r8a66597)
-{
-        mod_timer(&r8a66597->rh_timer,
-                        jiffies + msecs_to_jiffies(R8A66597_RH_POLL_TIME));
-}
-
-static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port)
-{
-        struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
-
-        rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
-        rh->scount = R8A66597_MAX_SAMPLING;
-        r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_CONNECTION)
-                                         | (1 << USB_PORT_FEAT_C_CONNECTION);
-        r8a66597_root_hub_start_polling(r8a66597);
-}
-
 static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 {
         struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
@@ -1594,7 +1597,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
                         r8a66597_bclr(r8a66597, ATTCHE, INTENB2);
 
                         /* start usb bus sampling */
-                        start_root_hub_sampling(r8a66597, 1);
+                        start_root_hub_sampling(r8a66597, 1, 1);
                 }
                 if (mask2 & DTCH) {
                         r8a66597_write(r8a66597, ~DTCH, INTSTS2);
@@ -1609,7 +1612,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
                         r8a66597_bclr(r8a66597, ATTCHE, INTENB1);
 
                         /* start usb bus sampling */
-                        start_root_hub_sampling(r8a66597, 0);
+                        start_root_hub_sampling(r8a66597, 0, 1);
                 }
                 if (mask1 & DTCH) {
                         r8a66597_write(r8a66597, ~DTCH, INTSTS1);
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 001789c9a11a..4ea50e0abcbb 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -42,16 +42,6 @@ config USB_ADUTUX
           To compile this driver as a module, choose M here.  The module
           will be called adutux.
 
-config USB_AUERSWALD
-        tristate "USB Auerswald ISDN support"
-        depends on USB
-        help
-          Say Y here if you want to connect an Auerswald USB ISDN Device
-          to your computer's USB port.
-
-          To compile this driver as a module, choose M here: the
-          module will be called auerswald.
-
 config USB_RIO500
         tristate "USB Diamond Rio500 support"
         depends on USB
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index aba091cb5ec0..45b4e12afb08 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -5,7 +5,6 @@
 
 obj-$(CONFIG_USB_ADUTUX)        += adutux.o
 obj-$(CONFIG_USB_APPLEDISPLAY)  += appledisplay.o
-obj-$(CONFIG_USB_AUERSWALD)     += auerswald.o
 obj-$(CONFIG_USB_BERRY_CHARGE)  += berry_charge.o
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)       += cytherm.o
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
deleted file mode 100644
index d2f61d5510e7..000000000000
--- a/drivers/usb/misc/auerswald.c
+++ /dev/null
@@ -1,2152 +0,0 @@
-/*****************************************************************************/
-/*
- *      auerswald.c  --  Auerswald PBX/System Telephone usb driver.
- *
- *      Copyright (C) 2001  Wolfgang Mües (wolfgang@iksw-muees.de)
- *
- *      Very much code of this driver is borrowed from dabusb.c (Deti Fliegl)
- *      and from the USB Skeleton driver (Greg Kroah-Hartman). Thank you.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- /*****************************************************************************/
-
-/* Standard Linux module include files */
-#include <asm/uaccess.h>
-#include <asm/byteorder.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-/*-------------------------------------------------------------------*/
-/* Debug support                                                     */
-#ifdef DEBUG
-#define dump( adr, len) \
-do {                    \
-        unsigned int u; \
-        printk (KERN_DEBUG); \
-        for (u = 0; u < len; u++) \
-                printk (" %02X", adr[u] & 0xFF); \
-        printk ("\n"); \
-} while (0)
-#else
-#define dump( adr, len)
-#endif
-
-/*-------------------------------------------------------------------*/
-/* Version Information */
-#define DRIVER_VERSION "0.9.11"
-#define DRIVER_AUTHOR  "Wolfgang Mües <wolfgang@iksw-muees.de>"
-#define DRIVER_DESC    "Auerswald PBX/System Telephone usb driver"
-
-/*-------------------------------------------------------------------*/
-/* Private declarations for Auerswald USB driver                     */
-
-/* Auerswald Vendor ID */
-#define ID_AUERSWALD    0x09BF
-
-#define AUER_MINOR_BASE 112     /* auerswald driver minor number */
-
-/* we can have up to this number of device plugged in at once */
-#define AUER_MAX_DEVICES 16
-
-
-/* Number of read buffers for each device */
-#define AU_RBUFFERS     10
-
-/* Number of chain elements for each control chain */
-#define AUCH_ELEMENTS   20
-
-/* Number of retries in communication */
-#define AU_RETRIES      10
-
-/*-------------------------------------------------------------------*/
-/* vendor specific protocol                                          */
-/* Header Byte */
-#define AUH_INDIRMASK   0x80    /* mask for direct/indirect bit */
-#define AUH_DIRECT      0x00    /* data is for USB device */
-#define AUH_INDIRECT    0x80    /* USB device is relay */
-
-#define AUH_SPLITMASK   0x40    /* mask for split bit */
-#define AUH_UNSPLIT     0x00    /* data block is full-size */
-#define AUH_SPLIT       0x40    /* data block is part of a larger one,
-                                   split-byte follows */
-
-#define AUH_TYPEMASK    0x3F    /* mask for type of data transfer */
-#define AUH_TYPESIZE    0x40    /* different types */
-#define AUH_DCHANNEL    0x00    /* D channel data */
-#define AUH_B1CHANNEL   0x01    /* B1 channel transparent */
-#define AUH_B2CHANNEL   0x02    /* B2 channel transparent */
-/*                0x03..0x0F       reserved for driver internal use */
-#define AUH_COMMAND     0x10    /* Command channel */
-#define AUH_BPROT       0x11    /* Configuration block protocol */
-#define AUH_DPROTANA    0x12    /* D channel protocol analyzer */
-#define AUH_TAPI        0x13    /* telephone api data (ATD) */
-/*                0x14..0x3F       reserved for other protocols */
-#define AUH_UNASSIGNED  0xFF    /* if char device has no assigned service */
-#define AUH_FIRSTUSERCH 0x11    /* first channel which is available for driver users */
-
-#define AUH_SIZE        1       /* Size of Header Byte */
-
-/* Split Byte. Only present if split bit in header byte set.*/
-#define AUS_STARTMASK   0x80    /* mask for first block of splitted frame */
-#define AUS_FIRST       0x80    /* first block */
-#define AUS_FOLLOW      0x00    /* following block */
-
-#define AUS_ENDMASK     0x40    /* mask for last block of splitted frame */
-#define AUS_END         0x40    /* last block */
-#define AUS_NOEND       0x00    /* not the last block */
-
-#define AUS_LENMASK     0x3F    /* mask for block length information */
-
-/* Request types */
-#define AUT_RREQ        (USB_DIR_IN  | USB_TYPE_VENDOR | USB_RECIP_OTHER)   /* Read Request */
-#define AUT_WREQ        (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER)   /* Write Request */
-
-/* Vendor Requests */
-#define AUV_GETINFO     0x00    /* GetDeviceInfo */
-#define AUV_WBLOCK      0x01    /* Write Block */
-#define AUV_RBLOCK      0x02    /* Read Block */
-#define AUV_CHANNELCTL  0x03    /* Channel Control */
-#define AUV_DUMMY       0x04    /* Dummy Out for retry */
-
-/* Device Info Types */
-#define AUDI_NUMBCH     0x0000  /* Number of supported B channels */
-#define AUDI_OUTFSIZE   0x0001  /* Size of OUT B channel fifos */
-#define AUDI_MBCTRANS   0x0002  /* max. Blocklength of control transfer */
-
-/* Interrupt endpoint definitions */
-#define AU_IRQENDP      1       /* Endpoint number */
-#define AU_IRQCMDID     16      /* Command-block ID */
-#define AU_BLOCKRDY     0       /* Command: Block data ready on ctl endpoint */
-#define AU_IRQMINSIZE   5       /* Nr. of bytes decoded in this driver */
-
-/* Device String Descriptors */
-#define AUSI_VENDOR     1       /* "Auerswald GmbH & Co. KG" */
-#define AUSI_DEVICE     2       /* Name of the Device */
-#define AUSI_SERIALNR   3       /* Serial Number */
-#define AUSI_MSN        4       /* "MSN ..." (first) Multiple Subscriber Number */
-
-#define AUSI_DLEN       100     /* Max. Length of Device Description */
-
-#define AUV_RETRY       0x101   /* First Firmware version which can do control retries */
-
-/*-------------------------------------------------------------------*/
-/* External data structures / Interface                              */
-typedef struct
-{
-        char __user *buf;       /* return buffer for string contents */
-        unsigned int bsize;     /* size of return buffer */
-} audevinfo_t,*paudevinfo_t;
-
-/* IO controls */
-#define IOCTL_AU_SLEN     _IOR( 'U', 0xF0, int)         /* return the max. string descriptor length */
-#define IOCTL_AU_DEVINFO  _IOWR('U', 0xF1, audevinfo_t) /* get name of a specific device */
-#define IOCTL_AU_SERVREQ  _IOW( 'U', 0xF2, int)         /* request a service channel */
-#define IOCTL_AU_BUFLEN   _IOR( 'U', 0xF3, int)         /* return the max. buffer length for the device */
-#define IOCTL_AU_RXAVAIL  _IOR( 'U', 0xF4, int)         /* return != 0 if Receive Data available */
-#define IOCTL_AU_CONNECT  _IOR( 'U', 0xF5, int)         /* return != 0 if connected to a service channel */
-#define IOCTL_AU_TXREADY  _IOR( 'U', 0xF6, int)         /* return != 0 if Transmitt channel ready to send */
-/*                              'U'  0xF7..0xFF reseved */
-
-/*-------------------------------------------------------------------*/
-/* Internal data structures                                          */
-
-/* ..................................................................*/
-/* urb chain element */
-struct  auerchain;                      /* forward for circular reference */
-typedef struct
-{
-        struct auerchain *chain;        /* pointer to the chain to which this element belongs */
-        struct urb * urbp;                   /* pointer to attached urb */
-        void *context;                  /* saved URB context */
-        usb_complete_t complete;        /* saved URB completion function */
-        struct list_head list;          /* to include element into a list */
-} auerchainelement_t,*pauerchainelement_t;
-
-/* urb chain */
-typedef struct auerchain
-{
-        pauerchainelement_t active;     /* element which is submitted to urb */
-        spinlock_t lock;                /* protection agains interrupts */
-        struct list_head waiting_list;  /* list of waiting elements */
-        struct list_head free_list;     /* list of available elements */
-} auerchain_t,*pauerchain_t;
-
-/* urb blocking completion helper struct */
-typedef struct
-{
-        wait_queue_head_t wqh;          /* wait for completion */
-        unsigned int done;              /* completion flag */
-} auerchain_chs_t,*pauerchain_chs_t;
-
-/* ...................................................................*/
-/* buffer element */
-struct  auerbufctl;                     /* forward */
-typedef struct
-{
-        char *bufp;                     /* reference to allocated data buffer */
-        unsigned int len;               /* number of characters in data buffer */
-        unsigned int retries;           /* for urb retries */
-        struct usb_ctrlrequest *dr;     /* for setup data in control messages */
-        struct urb * urbp;                   /* USB urb */
-        struct auerbufctl *list;        /* pointer to list */
-        struct list_head buff_list;     /* reference to next buffer in list */
-} auerbuf_t,*pauerbuf_t;
-
-/* buffer list control block */
-typedef struct auerbufctl
-{
-        spinlock_t lock;                /* protection in interrupt */
-        struct list_head free_buff_list;/* free buffers */
-        struct list_head rec_buff_list; /* buffers with receive data */
-} auerbufctl_t,*pauerbufctl_t;
-
-/* ...................................................................*/
-/* service context */
-struct  auerscon;                       /* forward */
-typedef void (*auer_dispatch_t)(struct auerscon*, pauerbuf_t);
-typedef void (*auer_disconn_t) (struct auerscon*);
-typedef struct auerscon
-{
-        unsigned int id;                /* protocol service id AUH_xxxx */
-        auer_dispatch_t dispatch;       /* dispatch read buffer */
-        auer_disconn_t disconnect;      /* disconnect from device, wake up all char readers */
-} auerscon_t,*pauerscon_t;
-
-/* ...................................................................*/
-/* USB device context */
-typedef struct
-{
-        struct mutex    mutex;              /* protection in user context */
-        char                    name[20];           /* name of the /dev/usb entry */
-        unsigned int            dtindex;            /* index in the device table */
-        struct usb_device *     usbdev;             /* USB device handle */
-        int                     open_count;         /* count the number of open character channels */
-        char                    dev_desc[AUSI_DLEN];/* for storing a textual description */
-        unsigned int            maxControlLength;   /* max. Length of control paket (without header) */
-        struct urb *            inturbp;            /* interrupt urb */
-        char *                  intbufp;            /* data buffer for interrupt urb */
-        unsigned int            irqsize;            /* size of interrupt endpoint 1 */
-        struct auerchain        controlchain;       /* for chaining of control messages */
-        auerbufctl_t            bufctl;             /* Buffer control for control transfers */
-        pauerscon_t             services[AUH_TYPESIZE];/* context pointers for each service */
-        unsigned int            version;            /* Version of the device */
-        wait_queue_head_t       bufferwait;         /* wait for a control buffer */
-} auerswald_t,*pauerswald_t;
-
-/* ................................................................... */
-/* character device context */
-typedef struct
-{
-        struct mutex mutex;             /* protection in user context */
-        pauerswald_t auerdev;           /* context pointer of assigned device */
-        auerbufctl_t bufctl;            /* controls the buffer chain */
-        auerscon_t scontext;            /* service context */
-        wait_queue_head_t readwait;     /* for synchronous reading */
-        struct mutex readmutex;         /* protection against multiple reads */
-        pauerbuf_t readbuf;             /* buffer held for partial reading */
-        unsigned int readoffset;        /* current offset in readbuf */
-        unsigned int removed;           /* is != 0 if device is removed */
-} auerchar_t,*pauerchar_t;
-
-
-/*-------------------------------------------------------------------*/
-/* Forwards */
-static void auerswald_ctrlread_complete (struct urb * urb);
-static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp);
-static struct usb_driver auerswald_driver;
-
-
-/*-------------------------------------------------------------------*/
-/* USB chain helper functions                                        */
-/* --------------------------                                        */
-
-/* completion function for chained urbs */
-static void auerchain_complete (struct urb * urb)
-{
-        unsigned long flags;
-        int result;
-
-        /* get pointer to element and to chain */
-        pauerchainelement_t acep = urb->context;
-        pauerchain_t         acp = acep->chain;
-
-        /* restore original entries in urb */
-        urb->context  = acep->context;
-        urb->complete = acep->complete;
-
-        dbg ("auerchain_complete called");
-
-        /* call original completion function
-           NOTE: this function may lead to more urbs submitted into the chain.
-                 (no chain lock at calling complete()!)
-                 acp->active != NULL is protecting us against recursion.*/
-        urb->complete (urb);
-
-        /* detach element from chain data structure */
-        spin_lock_irqsave (&acp->lock, flags);
-        if (acp->active != acep) /* paranoia debug check */
-                dbg ("auerchain_complete: completion on non-active element called!");
-        else
-                acp->active = NULL;
-
-        /* add the used chain element to the list of free elements */
-        list_add_tail (&acep->list, &acp->free_list);
-        acep = NULL;
-
-        /* is there a new element waiting in the chain? */
-        if (!acp->active && !list_empty (&acp->waiting_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = acp->waiting_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                acp->active = acep;
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* submit the new urb */
-        if (acep) {
-                urb    = acep->urbp;
-                dbg ("auerchain_complete: submitting next urb from chain");
-                urb->status = 0;        /* needed! */
-                result = usb_submit_urb(urb, GFP_ATOMIC);
-
-                /* check for submit errors */
-                if (result) {
-                        urb->status = result;
-                        dbg("auerchain_complete: usb_submit_urb with error code %d", result);
-                        /* and do error handling via *this* completion function (recursive) */
-                        auerchain_complete( urb);
-                }
-        } else {
-                /* simple return without submitting a new urb.
-                   The empty chain is detected with acp->active == NULL. */
-        };
-}
-
-
-/* submit function for chained urbs
-   this function may be called from completion context or from user space!
-   early = 1 -> submit in front of chain
-*/
-static int auerchain_submit_urb_list (pauerchain_t acp, struct urb * urb, int early)
-{
-        int result;
-        unsigned long flags;
-        pauerchainelement_t acep = NULL;
-
-        dbg ("auerchain_submit_urb called");
-
-        /* try to get a chain element */
-        spin_lock_irqsave (&acp->lock, flags);
-        if (!list_empty (&acp->free_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* if no chain element available: return with error */
-        if (!acep) {
-                return -ENOMEM;
-        }
-
-        /* fill in the new chain element values */
-        acep->chain    = acp;
-        acep->context  = urb->context;
-        acep->complete = urb->complete;
-        acep->urbp     = urb;
-        INIT_LIST_HEAD (&acep->list);
-
-        /* modify urb */
-        urb->context   = acep;
-        urb->complete  = auerchain_complete;
-        urb->status    = -EINPROGRESS;    /* usb_submit_urb does this, too */
-
-        /* add element to chain - or start it immediately */
-        spin_lock_irqsave (&acp->lock, flags);
-        if (acp->active) {
-                /* there is traffic in the chain, simple add element to chain */
-                if (early) {
-                        dbg ("adding new urb to head of chain");
-                        list_add (&acep->list, &acp->waiting_list);
-                } else {
-                        dbg ("adding new urb to end of chain");
-                        list_add_tail (&acep->list, &acp->waiting_list);
-                }
-                acep = NULL;
-        } else {
-                /* the chain is empty. Prepare restart */
-                acp->active = acep;
-        }
-        /* Spin has to be removed before usb_submit_urb! */
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* Submit urb if immediate restart */
-        if (acep) {
-                dbg("submitting urb immediate");
-                urb->status = 0;        /* needed! */
-                result = usb_submit_urb(urb, GFP_ATOMIC);
-                /* check for submit errors */
-                if (result) {
-                        urb->status = result;
-                        dbg("auerchain_submit_urb: usb_submit_urb with error code %d", result);
-                        /* and do error handling via completion function */
-                        auerchain_complete( urb);
-                }
-        }
-
-        return 0;
-}
-
-/* submit function for chained urbs
-   this function may be called from completion context or from user space!
-*/
-static int auerchain_submit_urb (pauerchain_t acp, struct urb * urb)
-{
-        return auerchain_submit_urb_list (acp, urb, 0);
-}
-
-/* cancel an urb which is submitted to the chain
-   the result is 0 if the urb is cancelled, or -EINPROGRESS if
-   the function is successfully started.
-*/
-static int auerchain_unlink_urb (pauerchain_t acp, struct urb * urb)
-{
-        unsigned long flags;
-        struct urb * urbp;
-        pauerchainelement_t acep;
-        struct list_head *tmp;
-
-        dbg ("auerchain_unlink_urb called");
-
-        /* search the chain of waiting elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        list_for_each (tmp, &acp->waiting_list) {
-                acep = list_entry (tmp, auerchainelement_t, list);
-                if (acep->urbp == urb) {
-                        list_del (tmp);
-                        urb->context = acep->context;
-                        urb->complete = acep->complete;
-                        list_add_tail (&acep->list, &acp->free_list);
-                        spin_unlock_irqrestore (&acp->lock, flags);
-                        dbg ("unlink waiting urb");
-                        urb->status = -ENOENT;
-                        urb->complete (urb);
-                        return 0;
-                }
-        }
-        /* not found. */
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* get the active urb */
-        acep = acp->active;
-        if (acep) {
-                urbp = acep->urbp;
-
-                /* check if we have to cancel the active urb */
-                if (urbp == urb) {
-                        /* note that there is a race condition between the check above
-                           and the unlink() call because of no lock. This race is harmless,
-                           because the usb module will detect the unlink() after completion.
-                           We can't use the acp->lock here because the completion function
-                           wants to grab it.
-                        */
-                        dbg ("unlink active urb");
-                        return usb_unlink_urb (urbp);
-                }
-        }
-
-        /* not found anyway
-           ... is some kind of success
-        */
-        dbg ("urb to unlink not found in chain");
-        return 0;
-}
-
-/* cancel all urbs which are in the chain.
-   this function must not be called from interrupt or completion handler.
-*/
-static void auerchain_unlink_all (pauerchain_t acp)
-{
-        unsigned long flags;
-        struct urb * urbp;
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_unlink_all called");
-
-        /* clear the chain of waiting elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        while (!list_empty (&acp->waiting_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->waiting_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                urbp = acep->urbp;
-                urbp->context = acep->context;
-                urbp->complete = acep->complete;
-                list_add_tail (&acep->list, &acp->free_list);
-                spin_unlock_irqrestore (&acp->lock, flags);
-                dbg ("unlink waiting urb");
-                urbp->status = -ENOENT;
-                urbp->complete (urbp);
-                spin_lock_irqsave (&acp->lock, flags);
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* clear the active urb */
-        acep = acp->active;
-        if (acep) {
-                urbp = acep->urbp;
-                dbg ("unlink active urb");
-                usb_kill_urb (urbp);
-        }
-}
-
-
-/* free the chain.
-   this function must not be called from interrupt or completion handler.
-*/
-static void auerchain_free (pauerchain_t acp)
-{
-        unsigned long flags;
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_free called");
-
-        /* first, cancel all pending urbs */
-        auerchain_unlink_all (acp);
-
-        /* free the elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        while (!list_empty (&acp->free_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                spin_unlock_irqrestore (&acp->lock, flags);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                kfree (acep);
-                spin_lock_irqsave (&acp->lock, flags);
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-}
-
-
-/* Init the chain control structure */
-static void auerchain_init (pauerchain_t acp)
-{
-        /* init the chain data structure */
-        acp->active = NULL;
-        spin_lock_init (&acp->lock);
-        INIT_LIST_HEAD (&acp->waiting_list);
-        INIT_LIST_HEAD (&acp->free_list);
-}
-
-/* setup a chain.
-   It is assumed that there is no concurrency while setting up the chain
-   requirement: auerchain_init()
-*/
-static int auerchain_setup (pauerchain_t acp, unsigned int numElements)
-{
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_setup called with %d elements", numElements);
-
-        /* fill the list of free elements */
-        for (;numElements; numElements--) {
-                acep = kzalloc(sizeof(auerchainelement_t), GFP_KERNEL);
-                if (!acep)
-                        goto ac_fail;
-                INIT_LIST_HEAD (&acep->list);
-                list_add_tail (&acep->list, &acp->free_list);
-        }
-        return 0;
-
-ac_fail:/* free the elements */
-        while (!list_empty (&acp->free_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                kfree (acep);
-        }
-        return -ENOMEM;
-}
-
-
-/* completion handler for synchronous chained URBs */
-static void auerchain_blocking_completion (struct urb *urb)
-{
-        pauerchain_chs_t pchs = urb->context;
-        pchs->done = 1;
-        wmb();
-        wake_up (&pchs->wqh);
-}
-
-
-/* Starts chained urb and waits for completion or timeout */
-static int auerchain_start_wait_urb (pauerchain_t acp, struct urb *urb, int timeout, int* actual_length)
-{
-        auerchain_chs_t chs;
-        int status;
-
-        dbg ("auerchain_start_wait_urb called");
-        init_waitqueue_head (&chs.wqh);
-        chs.done = 0;
-
-        urb->context = &chs;
-        status = auerchain_submit_urb (acp, urb);
-        if (status)
-                /* something went wrong */
-                return status;
-
-        timeout = wait_event_timeout(chs.wqh, chs.done, timeout);
-
-        if (!timeout && !chs.done) {
-                if (urb->status != -EINPROGRESS) {      /* No callback?!! */
-                        dbg ("auerchain_start_wait_urb: raced timeout");
-                        status = urb->status;
-                } else {
-                        dbg ("auerchain_start_wait_urb: timeout");
-                        auerchain_unlink_urb (acp, urb);  /* remove urb safely */
-                        status = -ETIMEDOUT;
-                }
-        } else
-                status = urb->status;
-
-        if (status >= 0)
-                *actual_length = urb->actual_length;
-
-        return status;
-}
-
-
-/* auerchain_control_msg - Builds a control urb, sends it off and waits for completion
-   acp: pointer to the auerchain
-   dev: pointer to the usb device to send the message to
-   pipe: endpoint "pipe" to send the message to
-   request: USB message request value
-   requesttype: USB message request type value
-   value: USB message value
-   index: USB message index value
-   data: pointer to the data to send
-   size: length in bytes of the data to send
-   timeout: time to wait for the message to complete before timing out (if 0 the wait is forever)
-
-   This function sends a simple control message to a specified endpoint
-   and waits for the message to complete, or timeout.
-
-   If successful, it returns the transferred length, otherwise a negative error number.
-
-   Don't use this function from within an interrupt context, like a
-   bottom half handler.  If you need an asynchronous message, or need to send
-   a message from within interrupt context, use auerchain_submit_urb()
-*/
-static int auerchain_control_msg (pauerchain_t acp, struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype,
-                                  __u16 value, __u16 index, void *data, __u16 size, int timeout)
-{
-        int ret;
-        struct usb_ctrlrequest *dr;
-        struct urb *urb;
-        int uninitialized_var(length);
-
-        dbg ("auerchain_control_msg");
-        dr = kmalloc (sizeof (struct usb_ctrlrequest), GFP_KERNEL);
-        if (!dr)
-                return -ENOMEM;
-        urb = usb_alloc_urb (0, GFP_KERNEL);
-        if (!urb) {
-                kfree (dr);
-                return -ENOMEM;
-        }
-
-        dr->bRequestType = requesttype;
-        dr->bRequest = request;
-        dr->wValue  = cpu_to_le16 (value);
-        dr->wIndex  = cpu_to_le16 (index);
-        dr->wLength = cpu_to_le16 (size);
-
-        usb_fill_control_urb (urb, dev, pipe, (unsigned char*)dr, data, size,    /* build urb */
-                          auerchain_blocking_completion, NULL);
-        ret = auerchain_start_wait_urb (acp, urb, timeout, &length);
-
-        usb_free_urb (urb);
-        kfree (dr);
-
-        if (ret < 0)
-                return ret;
-        else
-                return length;
-}
-
-
-/*-------------------------------------------------------------------*/
-/* Buffer List helper functions                                      */
-
-/* free a single auerbuf */
-static void auerbuf_free (pauerbuf_t bp)
-{
-        kfree(bp->bufp);
-        kfree(bp->dr);
-        usb_free_urb(bp->urbp);
-        kfree(bp);
-}
-
-/* free the buffers from an auerbuf list */
-static void auerbuf_free_list (struct list_head *q)
-{
-        struct list_head *tmp;
-        struct list_head *p;
-        pauerbuf_t bp;
-
-        dbg ("auerbuf_free_list");
-        for (p = q->next; p != q;) {
-                bp = list_entry (p, auerbuf_t, buff_list);
-                tmp = p->next;
-                list_del (p);
-                p = tmp;
-                auerbuf_free (bp);
-        }
-}
-
-/* init the members of a list control block */
-static void auerbuf_init (pauerbufctl_t bcp)
-{
-        dbg ("auerbuf_init");
-        spin_lock_init (&bcp->lock);
-        INIT_LIST_HEAD (&bcp->free_buff_list);
-        INIT_LIST_HEAD (&bcp->rec_buff_list);
-}
-
-/* free all buffers from an auerbuf chain */
-static void auerbuf_free_buffers (pauerbufctl_t bcp)
-{
-        unsigned long flags;
-        dbg ("auerbuf_free_buffers");
-
-        spin_lock_irqsave (&bcp->lock, flags);
-
-        auerbuf_free_list (&bcp->free_buff_list);
-        auerbuf_free_list (&bcp->rec_buff_list);
-
-        spin_unlock_irqrestore (&bcp->lock, flags);
-}
-
-/* setup a list of buffers */
-/* requirement: auerbuf_init() */
-static int auerbuf_setup (pauerbufctl_t bcp, unsigned int numElements, unsigned int bufsize)
-{
-        pauerbuf_t bep = NULL;
-
-        dbg ("auerbuf_setup called with %d elements of %d bytes", numElements, bufsize);
-
-        /* fill the list of free elements */
-        for (;numElements; numElements--) {
-                bep = kzalloc(sizeof(auerbuf_t), GFP_KERNEL);
-                if (!bep)
-                        goto bl_fail;
-                bep->list = bcp;
-                INIT_LIST_HEAD (&bep->buff_list);
-                bep->bufp = kmalloc (bufsize, GFP_KERNEL);
-                if (!bep->bufp)
-                        goto bl_fail;
-                bep->dr = kmalloc(sizeof (struct usb_ctrlrequest), GFP_KERNEL);
-                if (!bep->dr)
-                        goto bl_fail;
-                bep->urbp = usb_alloc_urb (0, GFP_KERNEL);
-                if (!bep->urbp)
-                        goto bl_fail;
-                list_add_tail (&bep->buff_list, &bcp->free_buff_list);
-        }
-        return 0;
-
-bl_fail:/* not enough memory. Free allocated elements */
-        dbg ("auerbuf_setup: no more memory");
-        auerbuf_free(bep);
-        auerbuf_free_buffers (bcp);
-        return -ENOMEM;
-}
-
-/* insert a used buffer into the free list */
-static void auerbuf_releasebuf( pauerbuf_t bp)
-{
-        unsigned long flags;
-        pauerbufctl_t bcp = bp->list;
-        bp->retries = 0;
-
-        dbg ("auerbuf_releasebuf called");
-        spin_lock_irqsave (&bcp->lock, flags);
-        list_add_tail (&bp->buff_list, &bcp->free_buff_list);
-        spin_unlock_irqrestore (&bcp->lock, flags);
-}
-
-
-/*-------------------------------------------------------------------*/
-/* Completion handlers */
-
-/* Values of urb->status or results of usb_submit_urb():
-0               Initial, OK
--EINPROGRESS    during submission until end
--ENOENT         if urb is unlinked
--ETIME          Device did not respond
--ENOMEM         Memory Overflow
--ENODEV         Specified USB-device or bus doesn't exist
--ENXIO          URB already queued
--EINVAL         a) Invalid transfer type specified (or not supported)
-                b) Invalid interrupt interval (0n256)
--EAGAIN         a) Specified ISO start frame too early
-                b) (using ISO-ASAP) Too much scheduled for the future wait some time and try again.
--EFBIG          Too much ISO frames requested (currently uhci900)
--EPIPE          Specified pipe-handle/Endpoint is already stalled
--EMSGSIZE       Endpoint message size is zero, do interface/alternate setting
--EPROTO         a) Bitstuff error
-                b) Unknown USB error
--EILSEQ         CRC mismatch
--ENOSR          Buffer error
--EREMOTEIO      Short packet detected
--EXDEV          ISO transfer only partially completed look at individual frame status for details
--EINVAL         ISO madness, if this happens: Log off and go home
--EOVERFLOW      babble
-*/
-
-/* check if a status code allows a retry */
-static int auerswald_status_retry (int status)
-{
-        switch (status) {
-        case 0:
-        case -ETIME:
-        case -EOVERFLOW:
-        case -EAGAIN:
-        case -EPIPE:
-        case -EPROTO:
-        case -EILSEQ:
-        case -ENOSR:
-        case -EREMOTEIO:
-                return 1; /* do a retry */
-        }
-        return 0;       /* no retry possible */
-}
-
-/* Completion of asynchronous write block */
-static void auerchar_ctrlwrite_complete (struct urb * urb)
-{
-        pauerbuf_t bp =  urb->context;
-        pauerswald_t cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-        dbg ("auerchar_ctrlwrite_complete called");
-
-        /* reuse the buffer */
-        auerbuf_releasebuf (bp);
-        /* Wake up all processes waiting for a buffer */
-        wake_up (&cp->bufferwait);
-}
-
-/* Completion handler for dummy retry packet */
-static void auerswald_ctrlread_wretcomplete (struct urb * urb)
-{
-        pauerbuf_t bp = urb->context;
-        pauerswald_t cp;
-        int ret;
-        int status = urb->status;
-
-        dbg ("auerswald_ctrlread_wretcomplete called");
-        dbg ("complete with status: %d", status);
-        cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-
-        /* check if it is possible to advance */
-        if (!auerswald_status_retry(status) || !cp->usbdev) {
-                /* reuse the buffer */
-                err ("control dummy: transmission error %d, can not retry", status);
-                auerbuf_releasebuf (bp);
-                /* Wake up all processes waiting for a buffer */
-                wake_up (&cp->bufferwait);
-                return;
-        }
-
-        /* fill the control message */
-        bp->dr->bRequestType = AUT_RREQ;
-        bp->dr->bRequest     = AUV_RBLOCK;
-        bp->dr->wLength      = bp->dr->wValue;  /* temporary stored */
-        bp->dr->wValue       = cpu_to_le16 (1); /* Retry Flag */
-        /* bp->dr->index    = channel id;          remains */
-        usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0),
-                          (unsigned char*)bp->dr, bp->bufp, le16_to_cpu (bp->dr->wLength),
-                          auerswald_ctrlread_complete,bp);
-
-        /* submit the control msg as next paket */
-        ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1);
-        if (ret) {
-                dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret);
-                bp->urbp->status = ret;
-                auerswald_ctrlread_complete (bp->urbp);
-        }
-}
-
-/* completion handler for receiving of control messages */
-static void auerswald_ctrlread_complete (struct urb * urb)
-{
-        unsigned int  serviceid;
-        pauerswald_t  cp;
-        pauerscon_t   scp;
-        pauerbuf_t bp = urb->context;
-        int status = urb->status;
-        int ret;
-
-        dbg ("auerswald_ctrlread_complete called");
-
-        cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-
-        /* check if there is valid data in this urb */
-        if (status) {
-                dbg ("complete with non-zero status: %d", status);
-                /* should we do a retry? */
-                if (!auerswald_status_retry(status)
-                 || !cp->usbdev
-                 || (cp->version < AUV_RETRY)
-                 || (bp->retries >= AU_RETRIES)) {
-                        /* reuse the buffer */
-                        err ("control read: transmission error %d, can not retry", status);
-                        auerbuf_releasebuf (bp);
-                        /* Wake up all processes waiting for a buffer */
-                        wake_up (&cp->bufferwait);
-                        return;
-                }
-                bp->retries++;
-                dbg ("Retry count = %d", bp->retries);
-                /* send a long dummy control-write-message to allow device firmware to react */
-                bp->dr->bRequestType = AUT_WREQ;
-                bp->dr->bRequest     = AUV_DUMMY;
-                bp->dr->wValue       = bp->dr->wLength; /* temporary storage */
-                // bp->dr->wIndex    channel ID remains
-                bp->dr->wLength      = cpu_to_le16 (32); /* >= 8 bytes */
-                usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0),
-                        (unsigned char*)bp->dr, bp->bufp, 32,
-                        auerswald_ctrlread_wretcomplete,bp);
-
-                /* submit the control msg as next paket */
-                ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1);
-                if (ret) {
-                        dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret);
-                        bp->urbp->status = ret;
-                        auerswald_ctrlread_wretcomplete (bp->urbp);
-                }
-                return;
-        }
-
-        /* get the actual bytecount (incl. headerbyte) */
-        bp->len = urb->actual_length;
-        serviceid = bp->bufp[0] & AUH_TYPEMASK;
-        dbg ("Paket with serviceid %d and %d bytes received", serviceid, bp->len);
-
-        /* dispatch the paket */
-        scp = cp->services[serviceid];
-        if (scp) {
-                /* look, Ma, a listener! */
-                scp->dispatch (scp, bp);
-        }
-
-        /* release the paket */
-        auerbuf_releasebuf (bp);
-        /* Wake up all processes waiting for a buffer */
-        wake_up (&cp->bufferwait);
-}
-
-/*-------------------------------------------------------------------*/
-/* Handling of Interrupt Endpoint                                    */
-/* This interrupt Endpoint is used to inform the host about waiting
-   messages from the USB device.
-*/
-/* int completion handler. */
-static void auerswald_int_complete (struct urb * urb)
-{
-        unsigned long flags;
-        unsigned  int channelid;
-        unsigned  int bytecount;
-        int ret;
-        int status = urb->status;
-        pauerbuf_t   bp = NULL;
-        pauerswald_t cp = urb->context;
-
-        dbg ("%s called", __func__);
-
-        switch (status) {
-        case 0:
-                /* success */
-                break;
-        case -ECONNRESET:
-        case -ENOENT:
-        case -ESHUTDOWN:
-                /* this urb is terminated, clean up */
-                dbg("%s - urb shutting down with status: %d", __func__, status);
-                return;
-        default:
-                dbg("%s - nonzero urb status received: %d", __func__, status);
-                goto exit;
-        }
-
-        /* check if all needed data was received */
-        if (urb->actual_length < AU_IRQMINSIZE) {
-                dbg ("invalid data length received: %d bytes", urb->actual_length);
-                goto exit;
-        }
-
-        /* check the command code */
-        if (cp->intbufp[0] != AU_IRQCMDID) {
-                dbg ("invalid command received: %d", cp->intbufp[0]);
-                goto exit;
-        }
-
-        /* check the command type */
-        if (cp->intbufp[1] != AU_BLOCKRDY) {
-                dbg ("invalid command type received: %d", cp->intbufp[1]);
-                goto exit;
-        }
-
-        /* now extract the information */
-        channelid = cp->intbufp[2];
-        bytecount = (unsigned char)cp->intbufp[3];
-        bytecount |= (unsigned char)cp->intbufp[4] << 8;
-
-        /* check the channel id */
-        if (channelid >= AUH_TYPESIZE) {
-                dbg ("invalid channel id received: %d", channelid);
-                goto exit;
-        }
-
-        /* check the byte count */
-        if (bytecount > (cp->maxControlLength+AUH_SIZE)) {
-                dbg ("invalid byte count received: %d", bytecount);
-                goto exit;
-        }
-        dbg ("Service Channel = %d", channelid);
-        dbg ("Byte Count = %d", bytecount);
-
-        /* get a buffer for the next data paket */
-        spin_lock_irqsave (&cp->bufctl.lock, flags);
-        if (!list_empty (&cp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = cp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&cp->bufctl.lock, flags);
-
-        /* if no buffer available: skip it */
-        if (!bp) {
-                dbg ("auerswald_int_complete: no data buffer available");
-                /* can we do something more?
-                   This is a big problem: if this int packet is ignored, the
-                   device will wait forever and not signal any more data.
-                   The only real solution is: having enough buffers!
-                   Or perhaps temporary disabling the int endpoint?
-                */
-                goto exit;
-        }
-
-        /* fill the control message */
-        bp->dr->bRequestType = AUT_RREQ;
-        bp->dr->bRequest     = AUV_RBLOCK;
-        bp->dr->wValue       = cpu_to_le16 (0);
-        bp->dr->wIndex       = cpu_to_le16 (channelid | AUH_DIRECT | AUH_UNSPLIT);
-        bp->dr->wLength      = cpu_to_le16 (bytecount);
-        usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0),
-                          (unsigned char*)bp->dr, bp->bufp, bytecount,
-                          auerswald_ctrlread_complete,bp);
-
-        /* submit the control msg */
-        ret = auerchain_submit_urb (&cp->controlchain, bp->urbp);
-        if (ret) {
-                dbg ("auerswald_int_complete: nonzero result of auerchain_submit_urb %d", ret);
-                bp->urbp->status = ret;
-                auerswald_ctrlread_complete( bp->urbp);
-                /* here applies the same problem as above: device locking! */
-        }
-exit:
-        ret = usb_submit_urb (urb, GFP_ATOMIC);
-        if (ret)
-                err ("%s - usb_submit_urb failed with result %d",
-                     __func__, ret);
-}
-
-/* int memory deallocation
-   NOTE: no mutex please!
-*/
-static void auerswald_int_free (pauerswald_t cp)
-{
-        if (cp->inturbp) {
-                usb_free_urb(cp->inturbp);
-                cp->inturbp = NULL;
-        }
-        kfree(cp->intbufp);
-        cp->intbufp = NULL;
-}
-
-/* This function is called to activate the interrupt
-   endpoint. This function returns 0 if successful or an error code.
-   NOTE: no mutex please!
-*/
-static int auerswald_int_open (pauerswald_t cp)
-{
-        int ret;
-        struct usb_host_endpoint *ep;
-        int irqsize;
-        dbg ("auerswald_int_open");
-
-        ep = cp->usbdev->ep_in[AU_IRQENDP];
-        if (!ep) {
-                ret = -EFAULT;
-                goto intoend;
-        }
-        irqsize = le16_to_cpu(ep->desc.wMaxPacketSize);
-        cp->irqsize = irqsize;
-
-        /* allocate the urb and data buffer */
-        if (!cp->inturbp) {
-                cp->inturbp = usb_alloc_urb (0, GFP_KERNEL);
-                if (!cp->inturbp) {
-                        ret = -ENOMEM;
-                        goto intoend;
-                }
-        }
-        if (!cp->intbufp) {
-                cp->intbufp = kmalloc (irqsize, GFP_KERNEL);
-                if (!cp->intbufp) {
-                        ret = -ENOMEM;
-                        goto intoend;
-                }
-        }
-        /* setup urb */
-        usb_fill_int_urb (cp->inturbp, cp->usbdev,
-                        usb_rcvintpipe (cp->usbdev,AU_IRQENDP), cp->intbufp,
-                        irqsize, auerswald_int_complete, cp, ep->desc.bInterval);
-        /* start the urb */
-        cp->inturbp->status = 0;        /* needed! */
-        ret = usb_submit_urb (cp->inturbp, GFP_KERNEL);
-
-intoend:
-        if (ret < 0) {
-                /* activation of interrupt endpoint has failed. Now clean up. */
-                dbg ("auerswald_int_open: activation of int endpoint failed");
-
-                /* deallocate memory */
-                auerswald_int_free (cp);
-        }
-        return ret;
-}
-
-/* This function is called to deactivate the interrupt
-   endpoint. This function returns 0 if successful or an error code.
-   NOTE: no mutex please!
-*/
-static void auerswald_int_release (pauerswald_t cp)
-{
-        dbg ("auerswald_int_release");
-
-        /* stop the int endpoint */
-        usb_kill_urb (cp->inturbp);
-
-        /* deallocate memory */
-        auerswald_int_free (cp);
-}
-
-/* --------------------------------------------------------------------- */
-/* Helper functions                                                      */
-
-/* wake up waiting readers */
-static void auerchar_disconnect (pauerscon_t scp)
-{
-        pauerchar_t ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext)));
-        dbg ("auerchar_disconnect called");
-        ccp->removed = 1;
-        wake_up (&ccp->readwait);
-}
-
-
-/* dispatch a read paket to a waiting character device */
-static void auerchar_ctrlread_dispatch (pauerscon_t scp, pauerbuf_t bp)
-{
-        unsigned long flags;
-        pauerchar_t ccp;
-        pauerbuf_t newbp = NULL;
-        char * charp;
-        dbg ("auerchar_ctrlread_dispatch called");
-        ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext)));
-
-        /* get a read buffer from character device context */
-        spin_lock_irqsave (&ccp->bufctl.lock, flags);
-        if (!list_empty (&ccp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = ccp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                newbp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-
-        if (!newbp) {
-                dbg ("No read buffer available, discard paket!");
-                return;     /* no buffer, no dispatch */
-        }
-
-        /* copy information to new buffer element
-           (all buffers have the same length) */
-        charp = newbp->bufp;
-        newbp->bufp = bp->bufp;
-        bp->bufp = charp;
-        newbp->len = bp->len;
-
-        /* insert new buffer in read list */
-        spin_lock_irqsave (&ccp->bufctl.lock, flags);
-        list_add_tail (&newbp->buff_list, &ccp->bufctl.rec_buff_list);
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-        dbg ("read buffer appended to rec_list");
-
-        /* wake up pending synchronous reads */
-        wake_up (&ccp->readwait);
-}
-
-
-/* Delete an auerswald driver context */
-static void auerswald_delete( pauerswald_t cp)
-{
-        dbg( "auerswald_delete");
-        if (cp == NULL)
-                return;
-
-        /* Wake up all processes waiting for a buffer */
-        wake_up (&cp->bufferwait);
-
-        /* Cleaning up */
-        auerswald_int_release (cp);
-        auerchain_free (&cp->controlchain);
-        auerbuf_free_buffers (&cp->bufctl);
-
-        /* release the memory */
-        kfree( cp);
-}
-
-
-/* Delete an auerswald character context */
-static void auerchar_delete( pauerchar_t ccp)
-{
-        dbg ("auerchar_delete");
-        if (ccp == NULL)
-                return;
-
-        /* wake up pending synchronous reads */
-        ccp->removed = 1;
-        wake_up (&ccp->readwait);
-
-        /* remove the read buffer */
-        if (ccp->readbuf) {
-                auerbuf_releasebuf (ccp->readbuf);
-                ccp->readbuf = NULL;
-        }
-
-        /* remove the character buffers */
-        auerbuf_free_buffers (&ccp->bufctl);
-
-        /* release the memory */
-        kfree( ccp);
-}
-
-
-/* add a new service to the device
-   scp->id must be set!
-   return: 0 if OK, else error code
-*/
-static int auerswald_addservice (pauerswald_t cp, pauerscon_t scp)
-{
-        int ret;
-
-        /* is the device available? */
-        if (!cp->usbdev) {
-                dbg ("usbdev == NULL");
-                return -EIO;    /*no: can not add a service, sorry*/
-        }
-
-        /* is the service available? */
-        if (cp->services[scp->id]) {
-                dbg ("service is busy");
-                return -EBUSY;
-        }
-
-        /* device is available, service is free */
-        cp->services[scp->id] = scp;
-
-        /* register service in device */
-        ret = auerchain_control_msg(
-                &cp->controlchain,                      /* pointer to control chain */
-                cp->usbdev,                             /* pointer to device */
-                usb_sndctrlpipe (cp->usbdev, 0),        /* pipe to control endpoint */
-                AUV_CHANNELCTL,                         /* USB message request value */
-                AUT_WREQ,                               /* USB message request type value */
-                0x01,              /* open                 USB message value */
-                scp->id,                                /* USB message index value */
-                NULL,                                   /* pointer to the data to send */
-                0,                                      /* length in bytes of the data to send */
-                HZ * 2);                                /* time to wait for the message to complete before timing out */
-        if (ret < 0) {
-                dbg ("auerswald_addservice: auerchain_control_msg returned error code %d", ret);
-                /* undo above actions */
-                cp->services[scp->id] = NULL;
-                return ret;
-        }
-
-        dbg ("auerswald_addservice: channel open OK");
-        return 0;
-}
-
-
-/* remove a service from the device
-   scp->id must be set! */
-static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp)
-{
-        dbg ("auerswald_removeservice called");
-
-        /* check if we have a service allocated */
-        if (scp->id == AUH_UNASSIGNED)
-                return;
-
-        /* If there is a device: close the channel */
-        if (cp->usbdev) {
-                /* Close the service channel inside the device */
-                int ret = auerchain_control_msg(
-                &cp->controlchain,                      /* pointer to control chain */
-                cp->usbdev,                             /* pointer to device */
-                usb_sndctrlpipe (cp->usbdev, 0),        /* pipe to control endpoint */
-                AUV_CHANNELCTL,                         /* USB message request value */
-                AUT_WREQ,                               /* USB message request type value */
-                0x00,              // close             /* USB message value */
-                scp->id,                                /* USB message index value */
-                NULL,                                   /* pointer to the data to send */
-                0,                                      /* length in bytes of the data to send */
-                HZ * 2);                                /* time to wait for the message to complete before timing out */
-                if (ret < 0) {
-                        dbg ("auerswald_removeservice: auerchain_control_msg returned error code %d", ret);
-                }
-                else {
-                        dbg ("auerswald_removeservice: channel close OK");
-                }
-        }
-
-        /* remove the service from the device */
-        cp->services[scp->id] = NULL;
-        scp->id = AUH_UNASSIGNED;
-}
-
-
-/* --------------------------------------------------------------------- */
-/* Char device functions                                                 */
-
-/* Open a new character device */
-static int auerchar_open (struct inode *inode, struct file *file)
-{
-        int dtindex = iminor(inode);
-        pauerswald_t cp = NULL;
-        pauerchar_t ccp = NULL;
-        struct usb_interface *intf;
-        int ret;
-
-        /* minor number in range? */
-        if (dtindex < 0) {
-                return -ENODEV;
-        }
-        intf = usb_find_interface(&auerswald_driver, dtindex);
-        if (!intf) {
-                return -ENODEV;
-        }
-
-        /* usb device available? */
-        cp = usb_get_intfdata (intf);
-        if (cp == NULL) {
-                return -ENODEV;
-        }
-        if (mutex_lock_interruptible(&cp->mutex)) {
-                return -ERESTARTSYS;
-        }
-
-        /* we have access to the device. Now lets allocate memory */
-        ccp = kzalloc(sizeof(auerchar_t), GFP_KERNEL);
-        if (ccp == NULL) {
-                err ("out of memory");
-                ret = -ENOMEM;
-                goto ofail;
-        }
-
-        /* Initialize device descriptor */
-        mutex_init(&ccp->mutex);
-        mutex_init(&ccp->readmutex);
-        auerbuf_init (&ccp->bufctl);
-        ccp->scontext.id = AUH_UNASSIGNED;
-        ccp->scontext.dispatch = auerchar_ctrlread_dispatch;
-        ccp->scontext.disconnect = auerchar_disconnect;
-        init_waitqueue_head (&ccp->readwait);
-
-        ret = auerbuf_setup (&ccp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE);
-        if (ret) {
-                goto ofail;
-        }
-
-        cp->open_count++;
-        ccp->auerdev = cp;
-        dbg("open %s as /dev/%s", cp->dev_desc, cp->name);
-        mutex_unlock(&cp->mutex);
-
-        /* file IO stuff */
-        file->f_pos = 0;
-        file->private_data = ccp;
-        return nonseekable_open(inode, file);
-
-        /* Error exit */
-ofail:  mutex_unlock(&cp->mutex);
-        auerchar_delete (ccp);
-        return ret;
-}
-
-
-/* IOCTL functions */
-static long auerchar_ioctl(struct file *file, unsigned int cmd,
-                                                        unsigned long arg)
-{
-        pauerchar_t ccp = (pauerchar_t) file->private_data;
-        int ret = 0;
-        audevinfo_t devinfo;
-        pauerswald_t cp = NULL;
-        unsigned int u;
-        unsigned int __user *user_arg = (unsigned int __user *)arg;
-
-        dbg ("ioctl");
-
-        /* get the mutexes */
-        if (mutex_lock_interruptible(&ccp->mutex)) {
-                return -ERESTARTSYS;
-        }
-        cp = ccp->auerdev;
-        if (!cp) {
-                mutex_unlock(&ccp->mutex);
-                return -ENODEV;
-        }
-        if (mutex_lock_interruptible(&cp->mutex)) {
-                mutex_unlock(&ccp->mutex);
-                return -ERESTARTSYS;
-        }
-
-        /* Check for removal */
-        if (!cp->usbdev) {
-                mutex_unlock(&cp->mutex);
-                mutex_unlock(&ccp->mutex);
-                return -ENODEV;
-        }
-        lock_kernel();
-        switch (cmd) {
-
-        /* return != 0 if Transmitt channel ready to send */
-        case IOCTL_AU_TXREADY:
-                dbg ("IOCTL_AU_TXREADY");
-                u   = ccp->auerdev
-                   && (ccp->scontext.id != AUH_UNASSIGNED)
-                   && !list_empty (&cp->bufctl.free_buff_list);
-                ret = put_user (u, user_arg);
-                break;
-
-        /* return != 0 if connected to a service channel */
-        case IOCTL_AU_CONNECT:
-                dbg ("IOCTL_AU_CONNECT");
-                u = (ccp->scontext.id != AUH_UNASSIGNED);
-                ret = put_user (u, user_arg);
-                break;
-
-        /* return != 0 if Receive Data available */
-        case IOCTL_AU_RXAVAIL:
-                dbg ("IOCTL_AU_RXAVAIL");
-                if (ccp->scontext.id == AUH_UNASSIGNED) {
-                        ret = -EIO;
-                        break;
-                }
-                u = 0;  /* no data */
-                if (ccp->readbuf) {
-                        int restlen = ccp->readbuf->len - ccp->readoffset;
-                        if (restlen > 0)
-                                u = 1;
-                }
-                if (!u) {
-                        if (!list_empty (&ccp->bufctl.rec_buff_list)) {
-                                u = 1;
-                        }
-                }
-                ret = put_user (u, user_arg);
-                break;
-
-        /* return the max. buffer length for the device */
-        case IOCTL_AU_BUFLEN:
-                dbg ("IOCTL_AU_BUFLEN");
-                u = cp->maxControlLength;
-                ret = put_user (u, user_arg);
-                break;
-
-        /* requesting a service channel */
-        case IOCTL_AU_SERVREQ:
-                dbg ("IOCTL_AU_SERVREQ");
-                /* requesting a service means: release the previous one first */
-                auerswald_removeservice (cp, &ccp->scontext);
-                /* get the channel number */
-                ret = get_user (u, user_arg);
-                if (ret) {
-                        break;
-                }
-                if ((u < AUH_FIRSTUSERCH) || (u >= AUH_TYPESIZE)) {
-                        ret = -EIO;
-                        break;
-                }
-                dbg ("auerchar service request parameters are ok");
-                ccp->scontext.id = u;
-
-                /* request the service now */
-                ret = auerswald_addservice (cp, &ccp->scontext);
-                if (ret) {
-                        /* no: revert service entry */
-                        ccp->scontext.id = AUH_UNASSIGNED;
-                }
-                break;
-
-        /* get a string descriptor for the device */
-        case IOCTL_AU_DEVINFO:
-                dbg ("IOCTL_AU_DEVINFO");
-                if (copy_from_user (&devinfo, (void __user *) arg, sizeof (audevinfo_t))) {
-                        ret = -EFAULT;
-                        break;
-                }
-                u = strlen(cp->dev_desc)+1;
-                if (u > devinfo.bsize) {
-                        u = devinfo.bsize;
-                }
-                ret = copy_to_user(devinfo.buf, cp->dev_desc, u) ? -EFAULT : 0;
-                break;
-
-        /* get the max. string descriptor length */
-        case IOCTL_AU_SLEN:
-                dbg ("IOCTL_AU_SLEN");
-                u = AUSI_DLEN;
-                ret = put_user (u, user_arg);
-                break;
-
-        default:
-                dbg ("IOCTL_AU_UNKNOWN");
-                ret = -ENOTTY;
-                break;
-        }
-        unlock_kernel();
-        /* release the mutexes */
-        mutex_unlock(&cp->mutex);
-        mutex_unlock(&ccp->mutex);
-        return ret;
-}
-
-/* Read data from the device */
-static ssize_t auerchar_read (struct file *file, char __user *buf, size_t count, loff_t * ppos)
-{
-        unsigned long flags;
-        pauerchar_t ccp = (pauerchar_t) file->private_data;
-        pauerbuf_t   bp = NULL;
-        wait_queue_t wait;
-
-        dbg ("auerchar_read");
-
-        /* Error checking */
-        if (!ccp)
-                return -EIO;
-        if (*ppos)
-                return -ESPIPE;
-        if (count == 0)
-                return 0;
-
-        /* get the mutex */
-        if (mutex_lock_interruptible(&ccp->mutex))
-                return -ERESTARTSYS;
-
-        /* Can we expect to read something? */
-        if (ccp->scontext.id == AUH_UNASSIGNED) {
-                mutex_unlock(&ccp->mutex);
-                return -EIO;
-        }
-
-        /* only one reader per device allowed */
-        if (mutex_lock_interruptible(&ccp->readmutex)) {
-                mutex_unlock(&ccp->mutex);
-                return -ERESTARTSYS;
-        }
-
-        /* read data from readbuf, if available */
-doreadbuf:
-        bp = ccp->readbuf;
-        if (bp) {
-                /* read the maximum bytes */
-                int restlen = bp->len - ccp->readoffset;
-                if (restlen < 0)
-                        restlen = 0;
-                if (count > restlen)
-                        count = restlen;
-                if (count) {
-                        if (copy_to_user (buf, bp->bufp+ccp->readoffset, count)) {
-                                dbg ("auerswald_read: copy_to_user failed");
-                                mutex_unlock(&ccp->readmutex);
-                                mutex_unlock(&ccp->mutex);
-                                return -EFAULT;
-                        }
-                }
-                /* advance the read offset */
-                ccp->readoffset += count;
-                restlen -= count;
-                // reuse the read buffer
-                if (restlen <= 0) {
-                        auerbuf_releasebuf (bp);
-                        ccp->readbuf = NULL;
-                }
-                /* return with number of bytes read */
-                if (count) {
-                        mutex_unlock(&ccp->readmutex);
-                        mutex_unlock(&ccp->mutex);
-                        return count;
-                }
-        }
-
-        /* a read buffer is not available. Try to get the next data block. */
-doreadlist:
-        /* Preparing for sleep */
-        init_waitqueue_entry (&wait, current);
-        set_current_state (TASK_INTERRUPTIBLE);
-        add_wait_queue (&ccp->readwait, &wait);
-
-        bp = NULL;
-        spin_lock_irqsave (&ccp->bufctl.lock, flags);
-        if (!list_empty (&ccp->bufctl.rec_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = ccp->bufctl.rec_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-
-        /* have we got data? */
-        if (bp) {
-                ccp->readbuf = bp;
-                ccp->readoffset = AUH_SIZE; /* for headerbyte */
-                set_current_state (TASK_RUNNING);
-                remove_wait_queue (&ccp->readwait, &wait);
-                goto doreadbuf;           /* now we can read! */
-        }
-
-        /* no data available. Should we wait? */
-        if (file->f_flags & O_NONBLOCK) {
-                dbg ("No read buffer available, returning -EAGAIN");
-                set_current_state (TASK_RUNNING);
-                remove_wait_queue (&ccp->readwait, &wait);
-                mutex_unlock(&ccp->readmutex);
-                mutex_unlock(&ccp->mutex);
-                return -EAGAIN;  /* nonblocking, no data available */
-        }
-
-        /* yes, we should wait! */
-        mutex_unlock(&ccp->mutex); /* allow other operations while we wait */
-        schedule();
-        remove_wait_queue (&ccp->readwait, &wait);
-        if (signal_pending (current)) {
-                /* waked up by a signal */
-                mutex_unlock(&ccp->readmutex);
-                return -ERESTARTSYS;
-        }
-
-        /* Anything left to read? */
-        if ((ccp->scontext.id == AUH_UNASSIGNED) || ccp->removed) {
-                mutex_unlock(&ccp->readmutex);
-                return -EIO;
-        }
-
-        if (mutex_lock_interruptible(&ccp->mutex)) {
-                mutex_unlock(&ccp->readmutex);
-                return -ERESTARTSYS;
-        }
-
-        /* try to read the incoming data again */
-        goto doreadlist;
-}
-
-
-/* Write a data block into the right service channel of the device */
-static ssize_t auerchar_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
-{
-        pauerchar_t ccp = (pauerchar_t) file->private_data;
-        pauerswald_t cp = NULL;
-        pauerbuf_t bp;
-        unsigned long flags;
-        int ret;
-        wait_queue_t wait;
-
-        dbg ("auerchar_write %zd bytes", len);
-
-        /* Error checking */
-        if (!ccp)
-                return -EIO;
-        if (*ppos)
-                return -ESPIPE;
-        if (len == 0)
-                return 0;
-
-write_again:
-        /* get the mutex */
-        if (mutex_lock_interruptible(&ccp->mutex))
-                return -ERESTARTSYS;
-
-        /* Can we expect to write something? */
-        if (ccp->scontext.id == AUH_UNASSIGNED) {
-                mutex_unlock(&ccp->mutex);
-                return -EIO;
-        }
-
-        cp = ccp->auerdev;
-        if (!cp) {
-                mutex_unlock(&ccp->mutex);
-                return -ERESTARTSYS;
-        }
-        if (mutex_lock_interruptible(&cp->mutex)) {
-                mutex_unlock(&ccp->mutex);
-                return -ERESTARTSYS;
-        }
-        if (!cp->usbdev) {
-                mutex_unlock(&cp->mutex);
-                mutex_unlock(&ccp->mutex);
-                return -EIO;
-        }
-        /* Prepare for sleep */
-        init_waitqueue_entry (&wait, current);
-        set_current_state (TASK_INTERRUPTIBLE);
-        add_wait_queue (&cp->bufferwait, &wait);
-
-        /* Try to get a buffer from the device pool.
-           We can't use a buffer from ccp->bufctl because the write
-           command will last beond a release() */
-        bp = NULL;
-        spin_lock_irqsave (&cp->bufctl.lock, flags);
-        if (!list_empty (&cp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = cp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&cp->bufctl.lock, flags);
-
-        /* are there any buffers left? */
-        if (!bp) {
-                mutex_unlock(&cp->mutex);
-                mutex_unlock(&ccp->mutex);
-
-                /* NONBLOCK: don't wait */
-                if (file->f_flags & O_NONBLOCK) {
-                        set_current_state (TASK_RUNNING);
-                        remove_wait_queue (&cp->bufferwait, &wait);
-                        return -EAGAIN;
-                }
-
-                /* BLOCKING: wait */
-                schedule();
-                remove_wait_queue (&cp->bufferwait, &wait);
-                if (signal_pending (current)) {
-                        /* waked up by a signal */
-                        return -ERESTARTSYS;
-                }
-                goto write_again;
-        } else {
-                set_current_state (TASK_RUNNING);
-                remove_wait_queue (&cp->bufferwait, &wait);
-        }
-
-        /* protect against too big write requests */
-        if (len > cp->maxControlLength)
-                len = cp->maxControlLength;
-
-        /* Fill the buffer */
-        if (copy_from_user ( bp->bufp+AUH_SIZE, buf, len)) {
-                dbg ("copy_from_user failed");
-                auerbuf_releasebuf (bp);
-                /* Wake up all processes waiting for a buffer */
-                wake_up (&cp->bufferwait);
-                mutex_unlock(&cp->mutex);
-                mutex_unlock(&ccp->mutex);
-                return -EFAULT;
-        }
-
-        /* set the header byte */
-        *(bp->bufp) = ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT;
-
-        /* Set the transfer Parameters */
-        bp->len = len+AUH_SIZE;
-        bp->dr->bRequestType = AUT_WREQ;
-        bp->dr->bRequest     = AUV_WBLOCK;
-        bp->dr->wValue       = cpu_to_le16 (0);
-        bp->dr->wIndex       = cpu_to_le16 (ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT);
-        bp->dr->wLength      = cpu_to_le16 (len+AUH_SIZE);
-        usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0),
-                   (unsigned char*)bp->dr, bp->bufp, len+AUH_SIZE,
-                    auerchar_ctrlwrite_complete, bp);
-        /* up we go */
-        ret = auerchain_submit_urb (&cp->controlchain, bp->urbp);
-        mutex_unlock(&cp->mutex);
-        if (ret) {
-                dbg ("auerchar_write: nonzero result of auerchain_submit_urb %d", ret);
-                auerbuf_releasebuf (bp);
-                /* Wake up all processes waiting for a buffer */
-                wake_up (&cp->bufferwait);
-                mutex_unlock(&ccp->mutex);
-                return -EIO;
-        }
-        else {
-                dbg ("auerchar_write: Write OK");
-                mutex_unlock(&ccp->mutex);
-                return len;
-        }
-}
-
-
-/* Close a character device */
-static int auerchar_release (struct inode *inode, struct file *file)
-{
-        pauerchar_t ccp = (pauerchar_t) file->private_data;
-        pauerswald_t cp;
-        dbg("release");
-
-        mutex_lock(&ccp->mutex);
-        cp = ccp->auerdev;
-        if (cp) {
-                mutex_lock(&cp->mutex);
-                /* remove an open service */
-                auerswald_removeservice (cp, &ccp->scontext);
-                /* detach from device */
-                if ((--cp->open_count <= 0) && (cp->usbdev == NULL)) {
-                        /* usb device waits for removal */
-                        mutex_unlock(&cp->mutex);
-                        auerswald_delete (cp);
-                } else {
-                        mutex_unlock(&cp->mutex);
-                }
-                cp = NULL;
-                ccp->auerdev = NULL;
-        }
-        mutex_unlock(&ccp->mutex);
-        auerchar_delete (ccp);
-
-        return 0;
-}
-
-
-/*----------------------------------------------------------------------*/
-/* File operation structure                                             */
-static const struct file_operations auerswald_fops =
-{
-        .owner =        THIS_MODULE,
-        .llseek =       no_llseek,
-        .read =         auerchar_read,
-        .write =        auerchar_write,
-        .unlocked_ioctl = auerchar_ioctl,
-        .open =         auerchar_open,
-        .release =      auerchar_release,
-};
-
-static struct usb_class_driver auerswald_class = {
-        .name =         "auer%d",
-        .fops =         &auerswald_fops,
-        .minor_base =   AUER_MINOR_BASE,
-};
-
-
-/* --------------------------------------------------------------------- */
-/* Special USB driver functions                                          */
-
-/* Probe if this driver wants to serve an USB device
-
-   This entry point is called whenever a new device is attached to the bus.
-   Then the device driver has to create a new instance of its internal data
-   structures for the new device.
-
-   The  dev argument specifies the device context, which contains pointers
-   to all USB descriptors. The  interface argument specifies the interface
-   number. If a USB driver wants to bind itself to a particular device and
-   interface it has to return a pointer. This pointer normally references
-   the device driver's context structure.
-
-   Probing normally is done by checking the vendor and product identifications
-   or the class and subclass definitions. If they match the interface number
-   is compared with the ones supported by the driver. When probing is done
-   class based it might be necessary to parse some more USB descriptors because
-   the device properties can differ in a wide range.
-*/
-static int auerswald_probe (struct usb_interface *intf,
-                            const struct usb_device_id *id)
-{
-        struct usb_device *usbdev = interface_to_usbdev(intf);
-        pauerswald_t cp = NULL;
-        unsigned int u = 0;
-        __le16 *pbuf;
-        int ret;
-
-        dbg ("probe: vendor id 0x%x, device id 0x%x",
-             le16_to_cpu(usbdev->descriptor.idVendor),
-             le16_to_cpu(usbdev->descriptor.idProduct));
-
-        /* we use only the first -and only- interface */
-        if (intf->altsetting->desc.bInterfaceNumber != 0)
-                return -ENODEV;
-
-        /* allocate memory for our device and initialize it */
-        cp = kzalloc (sizeof(auerswald_t), GFP_KERNEL);
-        if (cp == NULL) {
-                err ("out of memory");
-                goto pfail;
-        }
-
-        /* Initialize device descriptor */
-        mutex_init(&cp->mutex);
-        cp->usbdev = usbdev;
-        auerchain_init (&cp->controlchain);
-        auerbuf_init (&cp->bufctl);
-        init_waitqueue_head (&cp->bufferwait);
-
-        ret = usb_register_dev(intf, &auerswald_class);
-        if (ret) {
-                err ("Not able to get a minor for this device.");
-                goto pfail;
-        }
-
-        /* Give the device a name */
-        sprintf (cp->name, "usb/auer%d", intf->minor);
-
-        /* Store the index */
-        cp->dtindex = intf->minor;
-
-        /* Get the usb version of the device */
-        cp->version = le16_to_cpu(cp->usbdev->descriptor.bcdDevice);
-        dbg ("Version is %X", cp->version);
-
-        /* allow some time to settle the device */
-        msleep(334);
-
-        /* Try to get a suitable textual description of the device */
-        /* Device name:*/
-        ret = usb_string( cp->usbdev, AUSI_DEVICE, cp->dev_desc, AUSI_DLEN-1);
-        if (ret >= 0) {
-                u += ret;
-                /* Append Serial Number */
-                memcpy(&cp->dev_desc[u], ",Ser# ", 6);
-                u += 6;
-                ret = usb_string( cp->usbdev, AUSI_SERIALNR, &cp->dev_desc[u], AUSI_DLEN-u-1);
-                if (ret >= 0) {
-                        u += ret;
-                        /* Append subscriber number */
-                        memcpy(&cp->dev_desc[u], ", ", 2);
-                        u += 2;
-                        ret = usb_string( cp->usbdev, AUSI_MSN, &cp->dev_desc[u], AUSI_DLEN-u-1);
-                        if (ret >= 0) {
-                                u += ret;
-                        }
-                }
-        }
-        cp->dev_desc[u] = '\0';
-        info("device is a %s", cp->dev_desc);
-
-        /* get the maximum allowed control transfer length */
-        pbuf = kmalloc(2, GFP_KERNEL);    /* use an allocated buffer because of urb target */
-        if (!pbuf) {
-                err( "out of memory");
-                goto pfail;
-        }
-        ret = usb_control_msg(cp->usbdev,           /* pointer to device */
-                usb_rcvctrlpipe( cp->usbdev, 0 ),   /* pipe to control endpoint */
-                AUV_GETINFO,                        /* USB message request value */
-                AUT_RREQ,                           /* USB message request type value */
-                0,                                  /* USB message value */
-                AUDI_MBCTRANS,                      /* USB message index value */
-                pbuf,                               /* pointer to the receive buffer */
-                2,                                  /* length of the buffer */
-                2000);                            /* time to wait for the message to complete before timing out */
-        if (ret == 2) {
-                cp->maxControlLength = le16_to_cpup(pbuf);
-                kfree(pbuf);
-                dbg("setup: max. allowed control transfersize is %d bytes", cp->maxControlLength);
-        } else {
-                kfree(pbuf);
-                err("setup: getting max. allowed control transfer length failed with error %d", ret);
-                goto pfail;
-        }
-
-        /* allocate a chain for the control messages */
-        if (auerchain_setup (&cp->controlchain, AUCH_ELEMENTS)) {
-                err ("out of memory");
-                goto pfail;
-        }
-
-        /* allocate buffers for control messages */
-        if (auerbuf_setup (&cp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE)) {
-                err ("out of memory");
-                goto pfail;
-        }
-
-        /* start the interrupt endpoint */
-        if (auerswald_int_open (cp)) {
-                err ("int endpoint failed");
-                goto pfail;
-        }
-
-        /* all OK */
-        usb_set_intfdata (intf, cp);
-        return 0;
-
-        /* Error exit: clean up the memory */
-pfail:  auerswald_delete (cp);
-        return -EIO;
-}
-
-
-/* Disconnect driver from a served device
-
-   This function is called whenever a device which was served by this driver
-   is disconnected.
-
-   The argument  dev specifies the device context and the  driver_context
-   returns a pointer to the previously registered  driver_context of the
-   probe function. After returning from the disconnect function the USB
-   framework completely deallocates all data structures associated with
-   this device. So especially the usb_device structure must not be used
-   any longer by the usb driver.
-*/
-static void auerswald_disconnect (struct usb_interface *intf)
-{
-        pauerswald_t cp = usb_get_intfdata (intf);
-        unsigned int u;
-
-        usb_set_intfdata (intf, NULL);
-        if (!cp)
-                return;
-
-        /* give back our USB minor number */
-        usb_deregister_dev(intf, &auerswald_class);
-
-        mutex_lock(&cp->mutex);
-        info ("device /dev/%s now disconnecting", cp->name);
-
-        /* Stop the interrupt endpoint */
-        auerswald_int_release (cp);
-
-        /* remove the control chain allocated in auerswald_probe
-           This has the benefit of
-           a) all pending (a)synchronous urbs are unlinked
-           b) all buffers dealing with urbs are reclaimed
-        */
-        auerchain_free (&cp->controlchain);
-
-        if (cp->open_count == 0) {
-                /* nobody is using this device. So we can clean up now */
-                mutex_unlock(&cp->mutex);
-                /* mutex_unlock() is possible here because no other task
-                   can open the device (see above). I don't want
-                   to kfree() a locked mutex. */
-
-                auerswald_delete (cp);
-        } else {
-                /* device is used. Remove the pointer to the
-                   usb device (it's not valid any more). The last
-                   release() will do the clean up */
-                cp->usbdev = NULL;
-                mutex_unlock(&cp->mutex);
-                /* Terminate waiting writers */
-                wake_up (&cp->bufferwait);
-                /* Inform all waiting readers */
-                for ( u = 0; u < AUH_TYPESIZE; u++) {
-                        pauerscon_t scp = cp->services[u];
-                        if (scp)
-                                scp->disconnect( scp);
-                }
-        }
-}
-
-/* Descriptor for the devices which are served by this driver.
-   NOTE: this struct is parsed by the usbmanager install scripts.
-         Don't change without caution!
-*/
-static struct usb_device_id auerswald_ids [] = {
-        { USB_DEVICE (ID_AUERSWALD, 0x00C0) },          /* COMpact 2104 USB */
-        { USB_DEVICE (ID_AUERSWALD, 0x00DB) },          /* COMpact 4410/2206 USB */
-        { USB_DEVICE (ID_AUERSWALD, 0x00DC) }, /* COMpact 4406 DSL */
-        { USB_DEVICE (ID_AUERSWALD, 0x00DD) }, /* COMpact 2204 USB */
-        { USB_DEVICE (ID_AUERSWALD, 0x00F1) },          /* Comfort 2000 System Telephone */
-        { USB_DEVICE (ID_AUERSWALD, 0x00F2) },          /* Comfort 1200 System Telephone */
-        { }                                             /* Terminating entry */
-};
-
-/* Standard module device table */
-MODULE_DEVICE_TABLE (usb, auerswald_ids);
-
-/* Standard usb driver struct */
-static struct usb_driver auerswald_driver = {
-        .name =         "auerswald",
-        .probe =        auerswald_probe,
-        .disconnect =   auerswald_disconnect,
-        .id_table =     auerswald_ids,
-};
-
-
-/* --------------------------------------------------------------------- */
-/* Module loading/unloading                                              */
-
-/* Driver initialisation. Called after module loading.
-   NOTE: there is no concurrency at _init
-*/
-static int __init auerswald_init (void)
-{
-        int result;
-        dbg ("init");
-
-        /* register driver at the USB subsystem */
-        result = usb_register (&auerswald_driver);
-        if (result < 0) {
-                err ("driver could not be registered");
-                return -1;
-        }
-        return 0;
-}
-
-/* Driver deinit. Called before module removal.
-   NOTE: there is no concurrency at _cleanup
-*/
-static void __exit auerswald_cleanup (void)
-{
-        dbg ("cleanup");
-        usb_deregister (&auerswald_driver);
-}
-
-/* --------------------------------------------------------------------- */
-/* Linux device driver module description                                */
-
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
-
-module_init (auerswald_init);
-module_exit (auerswald_cleanup);
-
-/* --------------------------------------------------------------------- */
-
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index d94aa7387608..b897f6554ecd 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -48,7 +48,8 @@ static int isight_firmware_load(struct usb_interface *intf,
 
         if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
                 printk(KERN_ERR "Unable to load isight firmware\n");
-                return -ENODEV;
+                ret = -ENODEV;
+                goto out;
         }
 
         ptr = firmware->data;
@@ -91,7 +92,6 @@ static int isight_firmware_load(struct usb_interface *intf,
                              buf, llen, 300) != llen) {
                                 printk(KERN_ERR
                                        "Failed to load isight firmware\n");
-                                kfree(buf);
                                 ret = -ENODEV;
                                 goto out;
                         }
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
new file mode 100644
index 000000000000..faca4333f27a
--- /dev/null
+++ b/drivers/usb/musb/Kconfig
@@ -0,0 +1,176 @@
+#
+# USB Dual Role (OTG-ready) Controller Drivers
+# for silicon based on Mentor Graphics INVENTRA designs
+#
+
+comment "Enable Host or Gadget support to see Inventra options"
+        depends on !USB && USB_GADGET=n
+
+# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
+config USB_MUSB_HDRC
+        depends on (USB || USB_GADGET) && HAVE_CLK
+        select TWL4030_USB if MACH_OMAP_3430SDP
+        tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
+        help
+          Say Y here if your system has a dual role high speed USB
+          controller based on the Mentor Graphics silicon IP.  Then
+          configure options to match your silicon and the board
+          it's being used with, including the USB peripheral role,
+          or the USB host role, or both.
+
+          Texas Instruments parts using this IP include DaVinci 644x,
+          OMAP 243x, OMAP 343x, and TUSB 6010.
+
+          If you do not know what this is, please say N.
+
+          To compile this driver as a module, choose M here; the
+          module will be called "musb_hdrc".
+
+config USB_MUSB_SOC
+        boolean
+        depends on USB_MUSB_HDRC
+        default y if ARCH_DAVINCI
+        default y if ARCH_OMAP2430
+        default y if ARCH_OMAP34XX
+        help
+          Use a static <asm/arch/hdrc_cnf.h> file to describe how the
+          controller is configured (endpoints, mechanisms, etc) on the
+          current iteration of a given system-on-chip.
+
+comment "DaVinci 644x USB support"
+        depends on USB_MUSB_HDRC && ARCH_DAVINCI
+
+comment "OMAP 243x high speed USB support"
+        depends on USB_MUSB_HDRC && ARCH_OMAP2430
+
+comment "OMAP 343x high speed USB support"
+        depends on USB_MUSB_HDRC && ARCH_OMAP34XX
+
+config USB_TUSB6010
+        boolean "TUSB 6010 support"
+        depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+        default y
+        help
+          The TUSB 6010 chip, from Texas Instruments, connects a discrete
+          HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
+          (a high speed serial link).  It can use system-specific external
+          DMA controllers.
+
+choice
+        prompt "Driver Mode"
+        depends on USB_MUSB_HDRC
+        help
+          Dual-Role devices can support both host and peripheral roles,
+          as well as a the special "OTG Device" role which can switch
+          between both roles as needed.
+
+# use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support;
+# OTG needs both roles, not just USB_MUSB_HOST.
+config USB_MUSB_HOST
+        depends on USB
+        bool "USB Host"
+        help
+          Say Y here if your system supports the USB host role.
+          If it has a USB "A" (rectangular), "Mini-A" (uncommon),
+          or "Mini-AB" connector, it supports the host role.
+          (With a "Mini-AB" connector, you should enable USB OTG.)
+
+# use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral
+# side support ... OTG needs both roles
+config USB_MUSB_PERIPHERAL
+        depends on USB_GADGET
+        bool "USB Peripheral (gadget stack)"
+        select USB_GADGET_MUSB_HDRC
+        help
+          Say Y here if your system supports the USB peripheral role.
+          If it has a USB "B" (squarish), "Mini-B", or "Mini-AB"
+          connector, it supports the peripheral role.
+          (With a "Mini-AB" connector, you should enable USB OTG.)
+
+config USB_MUSB_OTG
+        depends on USB && USB_GADGET && PM && EXPERIMENTAL
+        bool "Both host and peripheral:  USB OTG (On The Go) Device"
+        select USB_GADGET_MUSB_HDRC
+        select USB_OTG
+        help
+           The most notable feature of USB OTG is support for a
+           "Dual-Role" device, which can act as either a device
+           or a host.  The initial role choice can be changed
+           later, when two dual-role devices talk to each other.
+
+           At this writing, the OTG support in this driver is incomplete,
+           omitting the mandatory HNP or SRP protocols.  However, some
+           of the cable based role switching works.  (That is, grounding
+           the ID pin switches the controller to host mode, while leaving
+           it floating leaves it in peripheral mode.)
+
+           Select this if your system has a Mini-AB connector, or
+           to simplify certain kinds of configuration.
+
+           To implement your OTG Targeted Peripherals List (TPL), enable
+           USB_OTG_WHITELIST and update "drivers/usb/core/otg_whitelist.h"
+           to match your requirements.
+
+endchoice
+
+# enable peripheral support (including with OTG)
+config USB_GADGET_MUSB_HDRC
+        bool
+        depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+#       default y
+#       select USB_GADGET_DUALSPEED
+#       select USB_GADGET_SELECTED
+
+# enables host support (including with OTG)
+config USB_MUSB_HDRC_HCD
+        bool
+        depends on USB_MUSB_HDRC && (USB_MUSB_HOST || USB_MUSB_OTG)
+        select USB_OTG if USB_GADGET_MUSB_HDRC
+        default y
+
+
+config MUSB_PIO_ONLY
+        bool 'Disable DMA (always use PIO)'
+        depends on USB_MUSB_HDRC
+        default y if USB_TUSB6010
+        help
+          All data is copied between memory and FIFO by the CPU.
+          DMA controllers are ignored.
+
+          Do not select 'n' here unless DMA support for your SOC or board
+          is unavailable (or unstable).  When DMA is enabled at compile time,
+          you can still disable it at run time using the "use_dma=n" module
+          parameter.
+
+config USB_INVENTRA_DMA
+        bool
+        depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+        default ARCH_OMAP2430 || ARCH_OMAP34XX
+        help
+          Enable DMA transfers using Mentor's engine.
+
+config USB_TI_CPPI_DMA
+        bool
+        depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+        default ARCH_DAVINCI
+        help
+          Enable DMA transfers when TI CPPI DMA is available.
+
+config USB_TUSB_OMAP_DMA
+        bool
+        depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+        depends on USB_TUSB6010
+        depends on ARCH_OMAP
+        default y
+        help
+          Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
+
+config  USB_MUSB_LOGLEVEL
+        depends on USB_MUSB_HDRC
+        int  'Logging Level (0 - none / 3 - annoying / ... )'
+        default 0
+        help
+          Set the logging level. 0 disables the debugging altogether,
+          although when USB_DEBUG is set the value is at least 1.
+          Starting at level 3, per-transfer (urb, usb_request, packet,
+          or dma transfer) tracing may kick in.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
new file mode 100644
index 000000000000..88eb67de08ae
--- /dev/null
+++ b/drivers/usb/musb/Makefile
@@ -0,0 +1,86 @@
+#
+# for USB OTG silicon based on Mentor Graphics INVENTRA designs
+#
+
+musb_hdrc-objs := musb_core.o
+
+obj-$(CONFIG_USB_MUSB_HDRC)     += musb_hdrc.o
+
+ifeq ($(CONFIG_ARCH_DAVINCI),y)
+        musb_hdrc-objs  += davinci.o
+endif
+
+ifeq ($(CONFIG_USB_TUSB6010),y)
+        musb_hdrc-objs  += tusb6010.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP2430),y)
+        musb_hdrc-objs  += omap2430.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP3430),y)
+        musb_hdrc-objs  += omap2430.o
+endif
+
+ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
+        musb_hdrc-objs          += musb_gadget_ep0.o musb_gadget.o
+endif
+
+ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
+        musb_hdrc-objs          += musb_virthub.o musb_host.o
+endif
+
+# the kconfig must guarantee that only one of the
+# possible I/O schemes will be enabled at a time ...
+# PIO only, or DMA (several potential schemes).
+# though PIO is always there to back up DMA, and for ep0
+
+ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
+
+  ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
+    musb_hdrc-objs              += musbhsdma.o
+
+  else
+    ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
+      musb_hdrc-objs            += cppi_dma.o
+
+    else
+      ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
+        musb_hdrc-objs          += tusb6010_omap.o
+
+      endif
+    endif
+  endif
+endif
+
+
+################################################################################
+
+# FIXME remove all these extra "-DMUSB_* things, stick to CONFIG_*
+
+ifeq ($(CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID),y)
+        EXTRA_CFLAGS += -DMUSB_AHB_ID
+endif
+
+# Debugging
+
+MUSB_DEBUG:=$(CONFIG_USB_MUSB_LOGLEVEL)
+
+ifeq ("$(strip $(MUSB_DEBUG))","")
+    ifdef CONFIG_USB_DEBUG
+        MUSB_DEBUG:=1
+    else
+        MUSB_DEBUG:=0
+    endif
+endif
+
+ifneq ($(MUSB_DEBUG),0)
+    EXTRA_CFLAGS += -DDEBUG
+
+    ifeq ($(CONFIG_PROC_FS),y)
+        musb_hdrc-objs          += musb_procfs.o
+    endif
+
+endif
+
+EXTRA_CFLAGS += -DMUSB_DEBUG=$(MUSB_DEBUG)
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
new file mode 100644
index 000000000000..5ad6d0893cbe
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.c
@@ -0,0 +1,1540 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file implements a DMA  interface using TI's CPPI DMA.
+ * For now it's DaVinci-only, but CPPI isn't specific to DaVinci or USB.
+ * The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
+ */
+
+#include <linux/usb.h>
+
+#include "musb_core.h"
+#include "cppi_dma.h"
+
+
+/* CPPI DMA status 7-mar-2006:
+ *
+ * - See musb_{host,gadget}.c for more info
+ *
+ * - Correct RX DMA generally forces the engine into irq-per-packet mode,
+ *   which can easily saturate the CPU under non-mass-storage loads.
+ *
+ * NOTES 24-aug-2006 (2.6.18-rc4):
+ *
+ * - peripheral RXDMA wedged in a test with packets of length 512/512/1.
+ *   evidently after the 1 byte packet was received and acked, the queue
+ *   of BDs got garbaged so it wouldn't empty the fifo.  (rxcsr 0x2003,
+ *   and RX DMA0: 4 left, 80000000 8feff880, 8feff860 8feff860; 8f321401
+ *   004001ff 00000001 .. 8feff860)  Host was just getting NAKed on tx
+ *   of its next (512 byte) packet.  IRQ issues?
+ *
+ * REVISIT:  the "transfer DMA" glue between CPPI and USB fifos will
+ * evidently also directly update the RX and TX CSRs ... so audit all
+ * host and peripheral side DMA code to avoid CSR access after DMA has
+ * been started.
+ */
+
+/* REVISIT now we can avoid preallocating these descriptors; or
+ * more simply, switch to a global freelist not per-channel ones.
+ * Note: at full speed, 64 descriptors == 4K bulk data.
+ */
+#define NUM_TXCHAN_BD       64
+#define NUM_RXCHAN_BD       64
+
+static inline void cpu_drain_writebuffer(void)
+{
+        wmb();
+#ifdef  CONFIG_CPU_ARM926T
+        /* REVISIT this "should not be needed",
+         * but lack of it sure seemed to hurt ...
+         */
+        asm("mcr p15, 0, r0, c7, c10, 4 @ drain write buffer\n");
+#endif
+}
+
+static inline struct cppi_descriptor *cppi_bd_alloc(struct cppi_channel *c)
+{
+        struct cppi_descriptor  *bd = c->freelist;
+
+        if (bd)
+                c->freelist = bd->next;
+        return bd;
+}
+
+static inline void
+cppi_bd_free(struct cppi_channel *c, struct cppi_descriptor *bd)
+{
+        if (!bd)
+                return;
+        bd->next = c->freelist;
+        c->freelist = bd;
+}
+
+/*
+ *  Start DMA controller
+ *
+ *  Initialize the DMA controller as necessary.
+ */
+
+/* zero out entire rx state RAM entry for the channel */
+static void cppi_reset_rx(struct cppi_rx_stateram __iomem *rx)
+{
+        musb_writel(&rx->rx_skipbytes, 0, 0);
+        musb_writel(&rx->rx_head, 0, 0);
+        musb_writel(&rx->rx_sop, 0, 0);
+        musb_writel(&rx->rx_current, 0, 0);
+        musb_writel(&rx->rx_buf_current, 0, 0);
+        musb_writel(&rx->rx_len_len, 0, 0);
+        musb_writel(&rx->rx_cnt_cnt, 0, 0);
+}
+
+/* zero out entire tx state RAM entry for the channel */
+static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr)
+{
+        musb_writel(&tx->tx_head, 0, 0);
+        musb_writel(&tx->tx_buf, 0, 0);
+        musb_writel(&tx->tx_current, 0, 0);
+        musb_writel(&tx->tx_buf_current, 0, 0);
+        musb_writel(&tx->tx_info, 0, 0);
+        musb_writel(&tx->tx_rem_len, 0, 0);
+        /* musb_writel(&tx->tx_dummy, 0, 0); */
+        musb_writel(&tx->tx_complete, 0, ptr);
+}
+
+static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
+{
+        int     j;
+
+        /* initialize channel fields */
+        c->head = NULL;
+        c->tail = NULL;
+        c->last_processed = NULL;
+        c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+        c->controller = cppi;
+        c->is_rndis = 0;
+        c->freelist = NULL;
+
+        /* build the BD Free list for the channel */
+        for (j = 0; j < NUM_TXCHAN_BD + 1; j++) {
+                struct cppi_descriptor  *bd;
+                dma_addr_t              dma;
+
+                bd = dma_pool_alloc(cppi->pool, GFP_KERNEL, &dma);
+                bd->dma = dma;
+                cppi_bd_free(c, bd);
+        }
+}
+
+static int cppi_channel_abort(struct dma_channel *);
+
+static void cppi_pool_free(struct cppi_channel *c)
+{
+        struct cppi             *cppi = c->controller;
+        struct cppi_descriptor  *bd;
+
+        (void) cppi_channel_abort(&c->channel);
+        c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+        c->controller = NULL;
+
+        /* free all its bds */
+        bd = c->last_processed;
+        do {
+                if (bd)
+                        dma_pool_free(cppi->pool, bd, bd->dma);
+                bd = cppi_bd_alloc(c);
+        } while (bd);
+        c->last_processed = NULL;
+}
+
+static int __init cppi_controller_start(struct dma_controller *c)
+{
+        struct cppi     *controller;
+        void __iomem    *tibase;
+        int             i;
+
+        controller = container_of(c, struct cppi, controller);
+
+        /* do whatever is necessary to start controller */
+        for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+                controller->tx[i].transmit = true;
+                controller->tx[i].index = i;
+        }
+        for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+                controller->rx[i].transmit = false;
+                controller->rx[i].index = i;
+        }
+
+        /* setup BD list on a per channel basis */
+        for (i = 0; i < ARRAY_SIZE(controller->tx); i++)
+                cppi_pool_init(controller, controller->tx + i);
+        for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+                cppi_pool_init(controller, controller->rx + i);
+
+        tibase =  controller->tibase;
+        INIT_LIST_HEAD(&controller->tx_complete);
+
+        /* initialise tx/rx channel head pointers to zero */
+        for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+                struct cppi_channel     *tx_ch = controller->tx + i;
+                struct cppi_tx_stateram __iomem *tx;
+
+                INIT_LIST_HEAD(&tx_ch->tx_complete);
+
+                tx = tibase + DAVINCI_TXCPPI_STATERAM_OFFSET(i);
+                tx_ch->state_ram = tx;
+                cppi_reset_tx(tx, 0);
+        }
+        for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+                struct cppi_channel     *rx_ch = controller->rx + i;
+                struct cppi_rx_stateram __iomem *rx;
+
+                INIT_LIST_HEAD(&rx_ch->tx_complete);
+
+                rx = tibase + DAVINCI_RXCPPI_STATERAM_OFFSET(i);
+                rx_ch->state_ram = rx;
+                cppi_reset_rx(rx);
+        }
+
+        /* enable individual cppi channels */
+        musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+                        DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+        musb_writel(tibase, DAVINCI_RXCPPI_INTENAB_REG,
+                        DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+        /* enable tx/rx CPPI control */
+        musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+        musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+
+        /* disable RNDIS mode, also host rx RNDIS autorequest */
+        musb_writel(tibase, DAVINCI_RNDIS_REG, 0);
+        musb_writel(tibase, DAVINCI_AUTOREQ_REG, 0);
+
+        return 0;
+}
+
+/*
+ *  Stop DMA controller
+ *
+ *  De-Init the DMA controller as necessary.
+ */
+
+static int cppi_controller_stop(struct dma_controller *c)
+{
+        struct cppi             *controller;
+        void __iomem            *tibase;
+        int                     i;
+
+        controller = container_of(c, struct cppi, controller);
+
+        tibase = controller->tibase;
+        /* DISABLE INDIVIDUAL CHANNEL Interrupts */
+        musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+                        DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+        musb_writel(tibase, DAVINCI_RXCPPI_INTCLR_REG,
+                        DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+        DBG(1, "Tearing down RX and TX Channels\n");
+        for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+                /* FIXME restructure of txdma to use bds like rxdma */
+                controller->tx[i].last_processed = NULL;
+                cppi_pool_free(controller->tx + i);
+        }
+        for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+                cppi_pool_free(controller->rx + i);
+
+        /* in Tx Case proper teardown is supported. We resort to disabling
+         * Tx/Rx CPPI after cleanup of Tx channels. Before TX teardown is
+         * complete TX CPPI cannot be disabled.
+         */
+        /*disable tx/rx cppi */
+        musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+        musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+
+        return 0;
+}
+
+/* While dma channel is allocated, we only want the core irqs active
+ * for fault reports, otherwise we'd get irqs that we don't care about.
+ * Except for TX irqs, where dma done != fifo empty and reusable ...
+ *
+ * NOTE: docs don't say either way, but irq masking **enables** irqs.
+ *
+ * REVISIT same issue applies to pure PIO usage too, and non-cppi dma...
+ */
+static inline void core_rxirq_disable(void __iomem *tibase, unsigned epnum)
+{
+        musb_writel(tibase, DAVINCI_USB_INT_MASK_CLR_REG, 1 << (epnum + 8));
+}
+
+static inline void core_rxirq_enable(void __iomem *tibase, unsigned epnum)
+{
+        musb_writel(tibase, DAVINCI_USB_INT_MASK_SET_REG, 1 << (epnum + 8));
+}
+
+
+/*
+ * Allocate a CPPI Channel for DMA.  With CPPI, channels are bound to
+ * each transfer direction of a non-control endpoint, so allocating
+ * (and deallocating) is mostly a way to notice bad housekeeping on
+ * the software side.  We assume the irqs are always active.
+ */
+static struct dma_channel *
+cppi_channel_allocate(struct dma_controller *c,
+                struct musb_hw_ep *ep, u8 transmit)
+{
+        struct cppi             *controller;
+        u8                      index;
+        struct cppi_channel     *cppi_ch;
+        void __iomem            *tibase;
+
+        controller = container_of(c, struct cppi, controller);
+        tibase = controller->tibase;
+
+        /* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */
+        index = ep->epnum - 1;
+
+        /* return the corresponding CPPI Channel Handle, and
+         * probably disable the non-CPPI irq until we need it.
+         */
+        if (transmit) {
+                if (index >= ARRAY_SIZE(controller->tx)) {
+                        DBG(1, "no %cX%d CPPI channel\n", 'T', index);
+                        return NULL;
+                }
+                cppi_ch = controller->tx + index;
+        } else {
+                if (index >= ARRAY_SIZE(controller->rx)) {
+                        DBG(1, "no %cX%d CPPI channel\n", 'R', index);
+                        return NULL;
+                }
+                cppi_ch = controller->rx + index;
+                core_rxirq_disable(tibase, ep->epnum);
+        }
+
+        /* REVISIT make this an error later once the same driver code works
+         * with the other DMA engine too
+         */
+        if (cppi_ch->hw_ep)
+                DBG(1, "re-allocating DMA%d %cX channel %p\n",
+                                index, transmit ? 'T' : 'R', cppi_ch);
+        cppi_ch->hw_ep = ep;
+        cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+        DBG(4, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R');
+        return &cppi_ch->channel;
+}
+
+/* Release a CPPI Channel.  */
+static void cppi_channel_release(struct dma_channel *channel)
+{
+        struct cppi_channel     *c;
+        void __iomem            *tibase;
+
+        /* REVISIT:  for paranoia, check state and abort if needed... */
+
+        c = container_of(channel, struct cppi_channel, channel);
+        tibase = c->controller->tibase;
+        if (!c->hw_ep)
+                DBG(1, "releasing idle DMA channel %p\n", c);
+        else if (!c->transmit)
+                core_rxirq_enable(tibase, c->index + 1);
+
+        /* for now, leave its cppi IRQ enabled (we won't trigger it) */
+        c->hw_ep = NULL;
+        channel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_rx(int level, struct cppi_channel *c, const char *tag)
+{
+        void __iomem                    *base = c->controller->mregs;
+        struct cppi_rx_stateram __iomem *rx = c->state_ram;
+
+        musb_ep_select(base, c->index + 1);
+
+        DBG(level, "RX DMA%d%s: %d left, csr %04x, "
+                        "%08x H%08x S%08x C%08x, "
+                        "B%08x L%08x %08x .. %08x"
+                        "\n",
+                c->index, tag,
+                musb_readl(c->controller->tibase,
+                        DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index),
+                musb_readw(c->hw_ep->regs, MUSB_RXCSR),
+
+                musb_readl(&rx->rx_skipbytes, 0),
+                musb_readl(&rx->rx_head, 0),
+                musb_readl(&rx->rx_sop, 0),
+                musb_readl(&rx->rx_current, 0),
+
+                musb_readl(&rx->rx_buf_current, 0),
+                musb_readl(&rx->rx_len_len, 0),
+                musb_readl(&rx->rx_cnt_cnt, 0),
+                musb_readl(&rx->rx_complete, 0)
+                );
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_tx(int level, struct cppi_channel *c, const char *tag)
+{
+        void __iomem                    *base = c->controller->mregs;
+        struct cppi_tx_stateram __iomem *tx = c->state_ram;
+
+        musb_ep_select(base, c->index + 1);
+
+        DBG(level, "TX DMA%d%s: csr %04x, "
+                        "H%08x S%08x C%08x %08x, "
+                        "F%08x L%08x .. %08x"
+                        "\n",
+                c->index, tag,
+                musb_readw(c->hw_ep->regs, MUSB_TXCSR),
+
+                musb_readl(&tx->tx_head, 0),
+                musb_readl(&tx->tx_buf, 0),
+                musb_readl(&tx->tx_current, 0),
+                musb_readl(&tx->tx_buf_current, 0),
+
+                musb_readl(&tx->tx_info, 0),
+                musb_readl(&tx->tx_rem_len, 0),
+                /* dummy/unused word 6 */
+                musb_readl(&tx->tx_complete, 0)
+                );
+}
+
+/* Context: controller irqlocked */
+static inline void
+cppi_rndis_update(struct cppi_channel *c, int is_rx,
+                void __iomem *tibase, int is_rndis)
+{
+        /* we may need to change the rndis flag for this cppi channel */
+        if (c->is_rndis != is_rndis) {
+                u32     value = musb_readl(tibase, DAVINCI_RNDIS_REG);
+                u32     temp = 1 << (c->index);
+
+                if (is_rx)
+                        temp <<= 16;
+                if (is_rndis)
+                        value |= temp;
+                else
+                        value &= ~temp;
+                musb_writel(tibase, DAVINCI_RNDIS_REG, value);
+                c->is_rndis = is_rndis;
+        }
+}
+
+static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
+{
+        pr_debug("RXBD/%s %08x: "
+                        "nxt %08x buf %08x off.blen %08x opt.plen %08x\n",
+                        tag, bd->dma,
+                        bd->hw_next, bd->hw_bufp, bd->hw_off_len,
+                        bd->hw_options);
+}
+
+static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
+{
+#if MUSB_DEBUG > 0
+        struct cppi_descriptor  *bd;
+
+        if (!_dbg_level(level))
+                return;
+        cppi_dump_rx(level, rx, tag);
+        if (rx->last_processed)
+                cppi_dump_rxbd("last", rx->last_processed);
+        for (bd = rx->head; bd; bd = bd->next)
+                cppi_dump_rxbd("active", bd);
+#endif
+}
+
+
+/* NOTE:  DaVinci autoreq is ignored except for host side "RNDIS" mode RX;
+ * so we won't ever use it (see "CPPI RX Woes" below).
+ */
+static inline int cppi_autoreq_update(struct cppi_channel *rx,
+                void __iomem *tibase, int onepacket, unsigned n_bds)
+{
+        u32     val;
+
+#ifdef  RNDIS_RX_IS_USABLE
+        u32     tmp;
+        /* assert(is_host_active(musb)) */
+
+        /* start from "AutoReq never" */
+        tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+        val = tmp & ~((0x3) << (rx->index * 2));
+
+        /* HCD arranged reqpkt for packet #1.  we arrange int
+         * for all but the last one, maybe in two segments.
+         */
+        if (!onepacket) {
+#if 0
+                /* use two segments, autoreq "all" then the last "never" */
+                val |= ((0x3) << (rx->index * 2));
+                n_bds--;
+#else
+                /* one segment, autoreq "all-but-last" */
+                val |= ((0x1) << (rx->index * 2));
+#endif
+        }
+
+        if (val != tmp) {
+                int n = 100;
+
+                /* make sure that autoreq is updated before continuing */
+                musb_writel(tibase, DAVINCI_AUTOREQ_REG, val);
+                do {
+                        tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+                        if (tmp == val)
+                                break;
+                        cpu_relax();
+                } while (n-- > 0);
+        }
+#endif
+
+        /* REQPKT is turned off after each segment */
+        if (n_bds && rx->channel.actual_len) {
+                void __iomem    *regs = rx->hw_ep->regs;
+
+                val = musb_readw(regs, MUSB_RXCSR);
+                if (!(val & MUSB_RXCSR_H_REQPKT)) {
+                        val |= MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_H_WZC_BITS;
+                        musb_writew(regs, MUSB_RXCSR, val);
+                        /* flush writebufer */
+                        val = musb_readw(regs, MUSB_RXCSR);
+                }
+        }
+        return n_bds;
+}
+
+
+/* Buffer enqueuing Logic:
+ *
+ *  - RX builds new queues each time, to help handle routine "early
+ *    termination" cases (faults, including errors and short reads)
+ *    more correctly.
+ *
+ *  - for now, TX reuses the same queue of BDs every time
+ *
+ * REVISIT long term, we want a normal dynamic model.
+ * ... the goal will be to append to the
+ * existing queue, processing completed "dma buffers" (segments) on the fly.
+ *
+ * Otherwise we force an IRQ latency between requests, which slows us a lot
+ * (especially in "transparent" dma).  Unfortunately that model seems to be
+ * inherent in the DMA model from the Mentor code, except in the rare case
+ * of transfers big enough (~128+ KB) that we could append "middle" segments
+ * in the TX paths.  (RX can't do this, see below.)
+ *
+ * That's true even in the CPPI- friendly iso case, where most urbs have
+ * several small segments provided in a group and where the "packet at a time"
+ * "transparent" DMA model is always correct, even on the RX side.
+ */
+
+/*
+ * CPPI TX:
+ * ========
+ * TX is a lot more reasonable than RX; it doesn't need to run in
+ * irq-per-packet mode very often.  RNDIS mode seems to behave too
+ * (except how it handles the exactly-N-packets case).  Building a
+ * txdma queue with multiple requests (urb or usb_request) looks
+ * like it would work ... but fault handling would need much testing.
+ *
+ * The main issue with TX mode RNDIS relates to transfer lengths that
+ * are an exact multiple of the packet length.  It appears that there's
+ * a hiccup in that case (maybe the DMA completes before the ZLP gets
+ * written?) boiling down to not being able to rely on CPPI writing any
+ * terminating zero length packet before the next transfer is written.
+ * So that's punted to PIO; better yet, gadget drivers can avoid it.
+ *
+ * Plus, there's allegedly an undocumented constraint that rndis transfer
+ * length be a multiple of 64 bytes ... but the chip doesn't act that
+ * way, and we really don't _want_ that behavior anyway.
+ *
+ * On TX, "transparent" mode works ... although experiments have shown
+ * problems trying to use the SOP/EOP bits in different USB packets.
+ *
+ * REVISIT try to handle terminating zero length packets using CPPI
+ * instead of doing it by PIO after an IRQ.  (Meanwhile, make Ethernet
+ * links avoid that issue by forcing them to avoid zlps.)
+ */
+static void
+cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
+{
+        unsigned                maxpacket = tx->maxpacket;
+        dma_addr_t              addr = tx->buf_dma + tx->offset;
+        size_t                  length = tx->buf_len - tx->offset;
+        struct cppi_descriptor  *bd;
+        unsigned                n_bds;
+        unsigned                i;
+        struct cppi_tx_stateram __iomem *tx_ram = tx->state_ram;
+        int                     rndis;
+
+        /* TX can use the CPPI "rndis" mode, where we can probably fit this
+         * transfer in one BD and one IRQ.  The only time we would NOT want
+         * to use it is when hardware constraints prevent it, or if we'd
+         * trigger the "send a ZLP?" confusion.
+         */
+        rndis = (maxpacket & 0x3f) == 0
+                && length < 0xffff
+                && (length % maxpacket) != 0;
+
+        if (rndis) {
+                maxpacket = length;
+                n_bds = 1;
+        } else {
+                n_bds = length / maxpacket;
+                if (!length || (length % maxpacket))
+                        n_bds++;
+                n_bds = min(n_bds, (unsigned) NUM_TXCHAN_BD);
+                length = min(n_bds * maxpacket, length);
+        }
+
+        DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n",
+                        tx->index,
+                        maxpacket,
+                        rndis ? "rndis" : "transparent",
+                        n_bds,
+                        addr, length);
+
+        cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
+
+        /* assuming here that channel_program is called during
+         * transfer initiation ... current code maintains state
+         * for one outstanding request only (no queues, not even
+         * the implicit ones of an iso urb).
+         */
+
+        bd = tx->freelist;
+        tx->head = bd;
+        tx->last_processed = NULL;
+
+        /* FIXME use BD pool like RX side does, and just queue
+         * the minimum number for this request.
+         */
+
+        /* Prepare queue of BDs first, then hand it to hardware.
+         * All BDs except maybe the last should be of full packet
+         * size; for RNDIS there _is_ only that last packet.
+         */
+        for (i = 0; i < n_bds; ) {
+                if (++i < n_bds && bd->next)
+                        bd->hw_next = bd->next->dma;
+                else
+                        bd->hw_next = 0;
+
+                bd->hw_bufp = tx->buf_dma + tx->offset;
+
+                /* FIXME set EOP only on the last packet,
+                 * SOP only on the first ... avoid IRQs
+                 */
+                if ((tx->offset + maxpacket) <= tx->buf_len) {
+                        tx->offset += maxpacket;
+                        bd->hw_off_len = maxpacket;
+                        bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+                                | CPPI_OWN_SET | maxpacket;
+                } else {
+                        /* only this one may be a partial USB Packet */
+                        u32             partial_len;
+
+                        partial_len = tx->buf_len - tx->offset;
+                        tx->offset = tx->buf_len;
+                        bd->hw_off_len = partial_len;
+
+                        bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+                                | CPPI_OWN_SET | partial_len;
+                        if (partial_len == 0)
+                                bd->hw_options |= CPPI_ZERO_SET;
+                }
+
+                DBG(5, "TXBD %p: nxt %08x buf %08x len %04x opt %08x\n",
+                                bd, bd->hw_next, bd->hw_bufp,
+                                bd->hw_off_len, bd->hw_options);
+
+                /* update the last BD enqueued to the list */
+                tx->tail = bd;
+                bd = bd->next;
+        }
+
+        /* BDs live in DMA-coherent memory, but writes might be pending */
+        cpu_drain_writebuffer();
+
+        /* Write to the HeadPtr in state RAM to trigger */
+        musb_writel(&tx_ram->tx_head, 0, (u32)tx->freelist->dma);
+
+        cppi_dump_tx(5, tx, "/S");
+}
+
+/*
+ * CPPI RX Woes:
+ * =============
+ * Consider a 1KB bulk RX buffer in two scenarios:  (a) it's fed two 300 byte
+ * packets back-to-back, and (b) it's fed two 512 byte packets back-to-back.
+ * (Full speed transfers have similar scenarios.)
+ *
+ * The correct behavior for Linux is that (a) fills the buffer with 300 bytes,
+ * and the next packet goes into a buffer that's queued later; while (b) fills
+ * the buffer with 1024 bytes.  How to do that with CPPI?
+ *
+ * - RX queues in "rndis" mode -- one single BD -- handle (a) correctly, but
+ *   (b) loses **BADLY** because nothing (!) happens when that second packet
+ *   fills the buffer, much less when a third one arrives.  (Which makes this
+ *   not a "true" RNDIS mode.  In the RNDIS protocol short-packet termination
+ *   is optional, and it's fine if peripherals -- not hosts! -- pad messages
+ *   out to end-of-buffer.  Standard PCI host controller DMA descriptors
+ *   implement that mode by default ... which is no accident.)
+ *
+ * - RX queues in "transparent" mode -- two BDs with 512 bytes each -- have
+ *   converse problems:  (b) is handled right, but (a) loses badly.  CPPI RX
+ *   ignores SOP/EOP markings and processes both of those BDs; so both packets
+ *   are loaded into the buffer (with a 212 byte gap between them), and the next
+ *   buffer queued will NOT get its 300 bytes of data. (It seems like SOP/EOP
+ *   are intended as outputs for RX queues, not inputs...)
+ *
+ * - A variant of "transparent" mode -- one BD at a time -- is the only way to
+ *   reliably make both cases work, with software handling both cases correctly
+ *   and at the significant penalty of needing an IRQ per packet.  (The lack of
+ *   I/O overlap can be slightly ameliorated by enabling double buffering.)
+ *
+ * So how to get rid of IRQ-per-packet?  The transparent multi-BD case could
+ * be used in special cases like mass storage, which sets URB_SHORT_NOT_OK
+ * (or maybe its peripheral side counterpart) to flag (a) scenarios as errors
+ * with guaranteed driver level fault recovery and scrubbing out what's left
+ * of that garbaged datastream.
+ *
+ * But there seems to be no way to identify the cases where CPPI RNDIS mode
+ * is appropriate -- which do NOT include RNDIS host drivers, but do include
+ * the CDC Ethernet driver! -- and the documentation is incomplete/wrong.
+ * So we can't _ever_ use RX RNDIS mode ... except by using a heuristic
+ * that applies best on the peripheral side (and which could fail rudely).
+ *
+ * Leaving only "transparent" mode; we avoid multi-bd modes in almost all
+ * cases other than mass storage class.  Otherwise we're correct but slow,
+ * since CPPI penalizes our need for a "true RNDIS" default mode.
+ */
+
+
+/* Heuristic, intended to kick in for ethernet/rndis peripheral ONLY
+ *
+ * IFF
+ *  (a) peripheral mode ... since rndis peripherals could pad their
+ *      writes to hosts, causing i/o failure; or we'd have to cope with
+ *      a largely unknowable variety of host side protocol variants
+ *  (b) and short reads are NOT errors ... since full reads would
+ *      cause those same i/o failures
+ *  (c) and read length is
+ *      - less than 64KB (max per cppi descriptor)
+ *      - not a multiple of 4096 (g_zero default, full reads typical)
+ *      - N (>1) packets long, ditto (full reads not EXPECTED)
+ * THEN
+ *   try rx rndis mode
+ *
+ * Cost of heuristic failing:  RXDMA wedges at the end of transfers that
+ * fill out the whole buffer.  Buggy host side usb network drivers could
+ * trigger that, but "in the field" such bugs seem to be all but unknown.
+ *
+ * So this module parameter lets the heuristic be disabled.  When using
+ * gadgetfs, the heuristic will probably need to be disabled.
+ */
+static int cppi_rx_rndis = 1;
+
+module_param(cppi_rx_rndis, bool, 0);
+MODULE_PARM_DESC(cppi_rx_rndis, "enable/disable RX RNDIS heuristic");
+
+
+/**
+ * cppi_next_rx_segment - dma read for the next chunk of a buffer
+ * @musb: the controller
+ * @rx: dma channel
+ * @onepacket: true unless caller treats short reads as errors, and
+ *      performs fault recovery above usbcore.
+ * Context: controller irqlocked
+ *
+ * See above notes about why we can't use multi-BD RX queues except in
+ * rare cases (mass storage class), and can never use the hardware "rndis"
+ * mode (since it's not a "true" RNDIS mode) with complete safety..
+ *
+ * It's ESSENTIAL that callers specify "onepacket" mode unless they kick in
+ * code to recover from corrupted datastreams after each short transfer.
+ */
+static void
+cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
+{
+        unsigned                maxpacket = rx->maxpacket;
+        dma_addr_t              addr = rx->buf_dma + rx->offset;
+        size_t                  length = rx->buf_len - rx->offset;
+        struct cppi_descriptor  *bd, *tail;
+        unsigned                n_bds;
+        unsigned                i;
+        void __iomem            *tibase = musb->ctrl_base;
+        int                     is_rndis = 0;
+        struct cppi_rx_stateram __iomem *rx_ram = rx->state_ram;
+
+        if (onepacket) {
+                /* almost every USB driver, host or peripheral side */
+                n_bds = 1;
+
+                /* maybe apply the heuristic above */
+                if (cppi_rx_rndis
+                                && is_peripheral_active(musb)
+                                && length > maxpacket
+                                && (length & ~0xffff) == 0
+                                && (length & 0x0fff) != 0
+                                && (length & (maxpacket - 1)) == 0) {
+                        maxpacket = length;
+                        is_rndis = 1;
+                }
+        } else {
+                /* virtually nothing except mass storage class */
+                if (length > 0xffff) {
+                        n_bds = 0xffff / maxpacket;
+                        length = n_bds * maxpacket;
+                } else {
+                        n_bds = length / maxpacket;
+                        if (length % maxpacket)
+                                n_bds++;
+                }
+                if (n_bds == 1)
+                        onepacket = 1;
+                else
+                        n_bds = min(n_bds, (unsigned) NUM_RXCHAN_BD);
+        }
+
+        /* In host mode, autorequest logic can generate some IN tokens; it's
+         * tricky since we can't leave REQPKT set in RXCSR after the transfer
+         * finishes. So:  multipacket transfers involve two or more segments.
+         * And always at least two IRQs ... RNDIS mode is not an option.
+         */
+        if (is_host_active(musb))
+                n_bds = cppi_autoreq_update(rx, tibase, onepacket, n_bds);
+
+        cppi_rndis_update(rx, 1, musb->ctrl_base, is_rndis);
+
+        length = min(n_bds * maxpacket, length);
+
+        DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
+                        "dma 0x%x len %u %u/%u\n",
+                        rx->index, maxpacket,
+                        onepacket
+                                ? (is_rndis ? "rndis" : "onepacket")
+                                : "multipacket",
+                        n_bds,
+                        musb_readl(tibase,
+                                DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+                                        & 0xffff,
+                        addr, length, rx->channel.actual_len, rx->buf_len);
+
+        /* only queue one segment at a time, since the hardware prevents
+         * correct queue shutdown after unexpected short packets
+         */
+        bd = cppi_bd_alloc(rx);
+        rx->head = bd;
+
+        /* Build BDs for all packets in this segment */
+        for (i = 0, tail = NULL; bd && i < n_bds; i++, tail = bd) {
+                u32     bd_len;
+
+                if (i) {
+                        bd = cppi_bd_alloc(rx);
+                        if (!bd)
+                                break;
+                        tail->next = bd;
+                        tail->hw_next = bd->dma;
+                }
+                bd->hw_next = 0;
+
+                /* all but the last packet will be maxpacket size */
+                if (maxpacket < length)
+                        bd_len = maxpacket;
+                else
+                        bd_len = length;
+
+                bd->hw_bufp = addr;
+                addr += bd_len;
+                rx->offset += bd_len;
+
+                bd->hw_off_len = (0 /*offset*/ << 16) + bd_len;
+                bd->buflen = bd_len;
+
+                bd->hw_options = CPPI_OWN_SET | (i == 0 ? length : 0);
+                length -= bd_len;
+        }
+
+        /* we always expect at least one reusable BD! */
+        if (!tail) {
+                WARNING("rx dma%d -- no BDs? need %d\n", rx->index, n_bds);
+                return;
+        } else if (i < n_bds)
+                WARNING("rx dma%d -- only %d of %d BDs\n", rx->index, i, n_bds);
+
+        tail->next = NULL;
+        tail->hw_next = 0;
+
+        bd = rx->head;
+        rx->tail = tail;
+
+        /* short reads and other faults should terminate this entire
+         * dma segment.  we want one "dma packet" per dma segment, not
+         * one per USB packet, terminating the whole queue at once...
+         * NOTE that current hardware seems to ignore SOP and EOP.
+         */
+        bd->hw_options |= CPPI_SOP_SET;
+        tail->hw_options |= CPPI_EOP_SET;
+
+        if (debug >= 5) {
+                struct cppi_descriptor  *d;
+
+                for (d = rx->head; d; d = d->next)
+                        cppi_dump_rxbd("S", d);
+        }
+
+        /* in case the preceding transfer left some state... */
+        tail = rx->last_processed;
+        if (tail) {
+                tail->next = bd;
+                tail->hw_next = bd->dma;
+        }
+
+        core_rxirq_enable(tibase, rx->index + 1);
+
+        /* BDs live in DMA-coherent memory, but writes might be pending */
+        cpu_drain_writebuffer();
+
+        /* REVISIT specs say to write this AFTER the BUFCNT register
+         * below ... but that loses badly.
+         */
+        musb_writel(&rx_ram->rx_head, 0, bd->dma);
+
+        /* bufferCount must be at least 3, and zeroes on completion
+         * unless it underflows below zero, or stops at two, or keeps
+         * growing ... grr.
+         */
+        i = musb_readl(tibase,
+                        DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+                        & 0xffff;
+
+        if (!i)
+                musb_writel(tibase,
+                        DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+                        n_bds + 2);
+        else if (n_bds > (i - 3))
+                musb_writel(tibase,
+                        DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+                        n_bds - (i - 3));
+
+        i = musb_readl(tibase,
+                        DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+                        & 0xffff;
+        if (i < (2 + n_bds)) {
+                DBG(2, "bufcnt%d underrun - %d (for %d)\n",
+                                        rx->index, i, n_bds);
+                musb_writel(tibase,
+                        DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+                        n_bds + 2);
+        }
+
+        cppi_dump_rx(4, rx, "/S");
+}
+
+/**
+ * cppi_channel_program - program channel for data transfer
+ * @ch: the channel
+ * @maxpacket: max packet size
+ * @mode: For RX, 1 unless the usb protocol driver promised to treat
+ *      all short reads as errors and kick in high level fault recovery.
+ *      For TX, ignored because of RNDIS mode races/glitches.
+ * @dma_addr: dma address of buffer
+ * @len: length of buffer
+ * Context: controller irqlocked
+ */
+static int cppi_channel_program(struct dma_channel *ch,
+                u16 maxpacket, u8 mode,
+                dma_addr_t dma_addr, u32 len)
+{
+        struct cppi_channel     *cppi_ch;
+        struct cppi             *controller;
+        struct musb             *musb;
+
+        cppi_ch = container_of(ch, struct cppi_channel, channel);
+        controller = cppi_ch->controller;
+        musb = controller->musb;
+
+        switch (ch->status) {
+        case MUSB_DMA_STATUS_BUS_ABORT:
+        case MUSB_DMA_STATUS_CORE_ABORT:
+                /* fault irq handler should have handled cleanup */
+                WARNING("%cX DMA%d not cleaned up after abort!\n",
+                                cppi_ch->transmit ? 'T' : 'R',
+                                cppi_ch->index);
+                /* WARN_ON(1); */
+                break;
+        case MUSB_DMA_STATUS_BUSY:
+                WARNING("program active channel?  %cX DMA%d\n",
+                                cppi_ch->transmit ? 'T' : 'R',
+                                cppi_ch->index);
+                /* WARN_ON(1); */
+                break;
+        case MUSB_DMA_STATUS_UNKNOWN:
+                DBG(1, "%cX DMA%d not allocated!\n",
+                                cppi_ch->transmit ? 'T' : 'R',
+                                cppi_ch->index);
+                /* FALLTHROUGH */
+        case MUSB_DMA_STATUS_FREE:
+                break;
+        }
+
+        ch->status = MUSB_DMA_STATUS_BUSY;
+
+        /* set transfer parameters, then queue up its first segment */
+        cppi_ch->buf_dma = dma_addr;
+        cppi_ch->offset = 0;
+        cppi_ch->maxpacket = maxpacket;
+        cppi_ch->buf_len = len;
+
+        /* TX channel? or RX? */
+        if (cppi_ch->transmit)
+                cppi_next_tx_segment(musb, cppi_ch);
+        else
+                cppi_next_rx_segment(musb, cppi_ch, mode);
+
+        return true;
+}
+
+static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
+{
+        struct cppi_channel             *rx = &cppi->rx[ch];
+        struct cppi_rx_stateram __iomem *state = rx->state_ram;
+        struct cppi_descriptor          *bd;
+        struct cppi_descriptor          *last = rx->last_processed;
+        bool                            completed = false;
+        bool                            acked = false;
+        int                             i;
+        dma_addr_t                      safe2ack;
+        void __iomem                    *regs = rx->hw_ep->regs;
+
+        cppi_dump_rx(6, rx, "/K");
+
+        bd = last ? last->next : rx->head;
+        if (!bd)
+                return false;
+
+        /* run through all completed BDs */
+        for (i = 0, safe2ack = musb_readl(&state->rx_complete, 0);
+                        (safe2ack || completed) && bd && i < NUM_RXCHAN_BD;
+                        i++, bd = bd->next) {
+                u16     len;
+
+                /* catch latest BD writes from CPPI */
+                rmb();
+                if (!completed && (bd->hw_options & CPPI_OWN_SET))
+                        break;
+
+                DBG(5, "C/RXBD %08x: nxt %08x buf %08x "
+                        "off.len %08x opt.len %08x (%d)\n",
+                        bd->dma, bd->hw_next, bd->hw_bufp,
+                        bd->hw_off_len, bd->hw_options,
+                        rx->channel.actual_len);
+
+                /* actual packet received length */
+                if ((bd->hw_options & CPPI_SOP_SET) && !completed)
+                        len = bd->hw_off_len & CPPI_RECV_PKTLEN_MASK;
+                else
+                        len = 0;
+
+                if (bd->hw_options & CPPI_EOQ_MASK)
+                        completed = true;
+
+                if (!completed && len < bd->buflen) {
+                        /* NOTE:  when we get a short packet, RXCSR_H_REQPKT
+                         * must have been cleared, and no more DMA packets may
+                         * active be in the queue... TI docs didn't say, but
+                         * CPPI ignores those BDs even though OWN is still set.
+                         */
+                        completed = true;
+                        DBG(3, "rx short %d/%d (%d)\n",
+                                        len, bd->buflen,
+                                        rx->channel.actual_len);
+                }
+
+                /* If we got here, we expect to ack at least one BD; meanwhile
+                 * CPPI may completing other BDs while we scan this list...
+                 *
+                 * RACE: we can notice OWN cleared before CPPI raises the
+                 * matching irq by writing that BD as the completion pointer.
+                 * In such cases, stop scanning and wait for the irq, avoiding
+                 * lost acks and states where BD ownership is unclear.
+                 */
+                if (bd->dma == safe2ack) {
+                        musb_writel(&state->rx_complete, 0, safe2ack);
+                        safe2ack = musb_readl(&state->rx_complete, 0);
+                        acked = true;
+                        if (bd->dma == safe2ack)
+                                safe2ack = 0;
+                }
+
+                rx->channel.actual_len += len;
+
+                cppi_bd_free(rx, last);
+                last = bd;
+
+                /* stop scanning on end-of-segment */
+                if (bd->hw_next == 0)
+                        completed = true;
+        }
+        rx->last_processed = last;
+
+        /* dma abort, lost ack, or ... */
+        if (!acked && last) {
+                int     csr;
+
+                if (safe2ack == 0 || safe2ack == rx->last_processed->dma)
+                        musb_writel(&state->rx_complete, 0, safe2ack);
+                if (safe2ack == 0) {
+                        cppi_bd_free(rx, last);
+                        rx->last_processed = NULL;
+
+                        /* if we land here on the host side, H_REQPKT will
+                         * be clear and we need to restart the queue...
+                         */
+                        WARN_ON(rx->head);
+                }
+                musb_ep_select(cppi->mregs, rx->index + 1);
+                csr = musb_readw(regs, MUSB_RXCSR);
+                if (csr & MUSB_RXCSR_DMAENAB) {
+                        DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n",
+                                rx->index,
+                                rx->head, rx->tail,
+                                rx->last_processed
+                                        ? rx->last_processed->dma
+                                        : 0,
+                                completed ? ", completed" : "",
+                                csr);
+                        cppi_dump_rxq(4, "/what?", rx);
+                }
+        }
+        if (!completed) {
+                int     csr;
+
+                rx->head = bd;
+
+                /* REVISIT seems like "autoreq all but EOP" doesn't...
+                 * setting it here "should" be racey, but seems to work
+                 */
+                csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+                if (is_host_active(cppi->musb)
+                                && bd
+                                && !(csr & MUSB_RXCSR_H_REQPKT)) {
+                        csr |= MUSB_RXCSR_H_REQPKT;
+                        musb_writew(regs, MUSB_RXCSR,
+                                        MUSB_RXCSR_H_WZC_BITS | csr);
+                        csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+                }
+        } else {
+                rx->head = NULL;
+                rx->tail = NULL;
+        }
+
+        cppi_dump_rx(6, rx, completed ? "/completed" : "/cleaned");
+        return completed;
+}
+
+void cppi_completion(struct musb *musb, u32 rx, u32 tx)
+{
+        void __iomem            *tibase;
+        int                     i, index;
+        struct cppi             *cppi;
+        struct musb_hw_ep       *hw_ep = NULL;
+
+        cppi = container_of(musb->dma_controller, struct cppi, controller);
+
+        tibase = musb->ctrl_base;
+
+        /* process TX channels */
+        for (index = 0; tx; tx = tx >> 1, index++) {
+                struct cppi_channel             *tx_ch;
+                struct cppi_tx_stateram __iomem *tx_ram;
+                bool                            completed = false;
+                struct cppi_descriptor          *bd;
+
+                if (!(tx & 1))
+                        continue;
+
+                tx_ch = cppi->tx + index;
+                tx_ram = tx_ch->state_ram;
+
+                /* FIXME  need a cppi_tx_scan() routine, which
+                 * can also be called from abort code
+                 */
+
+                cppi_dump_tx(5, tx_ch, "/E");
+
+                bd = tx_ch->head;
+
+                if (NULL == bd) {
+                        DBG(1, "null BD\n");
+                        continue;
+                }
+
+                /* run through all completed BDs */
+                for (i = 0; !completed && bd && i < NUM_TXCHAN_BD;
+                                i++, bd = bd->next) {
+                        u16     len;
+
+                        /* catch latest BD writes from CPPI */
+                        rmb();
+                        if (bd->hw_options & CPPI_OWN_SET)
+                                break;
+
+                        DBG(5, "C/TXBD %p n %x b %x off %x opt %x\n",
+                                        bd, bd->hw_next, bd->hw_bufp,
+                                        bd->hw_off_len, bd->hw_options);
+
+                        len = bd->hw_off_len & CPPI_BUFFER_LEN_MASK;
+                        tx_ch->channel.actual_len += len;
+
+                        tx_ch->last_processed = bd;
+
+                        /* write completion register to acknowledge
+                         * processing of completed BDs, and possibly
+                         * release the IRQ; EOQ might not be set ...
+                         *
+                         * REVISIT use the same ack strategy as rx
+                         *
+                         * REVISIT have observed bit 18 set; huh??
+                         */
+                        /* if ((bd->hw_options & CPPI_EOQ_MASK)) */
+                                musb_writel(&tx_ram->tx_complete, 0, bd->dma);
+
+                        /* stop scanning on end-of-segment */
+                        if (bd->hw_next == 0)
+                                completed = true;
+                }
+
+                /* on end of segment, maybe go to next one */
+                if (completed) {
+                        /* cppi_dump_tx(4, tx_ch, "/complete"); */
+
+                        /* transfer more, or report completion */
+                        if (tx_ch->offset >= tx_ch->buf_len) {
+                                tx_ch->head = NULL;
+                                tx_ch->tail = NULL;
+                                tx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+                                hw_ep = tx_ch->hw_ep;
+
+                                /* Peripheral role never repurposes the
+                                 * endpoint, so immediate completion is
+                                 * safe.  Host role waits for the fifo
+                                 * to empty (TXPKTRDY irq) before going
+                                 * to the next queued bulk transfer.
+                                 */
+                                if (is_host_active(cppi->musb)) {
+#if 0
+                                        /* WORKAROUND because we may
+                                         * not always get TXKPTRDY ...
+                                         */
+                                        int     csr;
+
+                                        csr = musb_readw(hw_ep->regs,
+                                                MUSB_TXCSR);
+                                        if (csr & MUSB_TXCSR_TXPKTRDY)
+#endif
+                                                completed = false;
+                                }
+                                if (completed)
+                                        musb_dma_completion(musb, index + 1, 1);
+
+                        } else {
+                                /* Bigger transfer than we could fit in
+                                 * that first batch of descriptors...
+                                 */
+                                cppi_next_tx_segment(musb, tx_ch);
+                        }
+                } else
+                        tx_ch->head = bd;
+        }
+
+        /* Start processing the RX block */
+        for (index = 0; rx; rx = rx >> 1, index++) {
+
+                if (rx & 1) {
+                        struct cppi_channel             *rx_ch;
+
+                        rx_ch = cppi->rx + index;
+
+                        /* let incomplete dma segments finish */
+                        if (!cppi_rx_scan(cppi, index))
+                                continue;
+
+                        /* start another dma segment if needed */
+                        if (rx_ch->channel.actual_len != rx_ch->buf_len
+                                        && rx_ch->channel.actual_len
+                                                == rx_ch->offset) {
+                                cppi_next_rx_segment(musb, rx_ch, 1);
+                                continue;
+                        }
+
+                        /* all segments completed! */
+                        rx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+                        hw_ep = rx_ch->hw_ep;
+
+                        core_rxirq_disable(tibase, index + 1);
+                        musb_dma_completion(musb, index + 1, 0);
+                }
+        }
+
+        /* write to CPPI EOI register to re-enable interrupts */
+        musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+}
+
+/* Instantiate a software object representing a DMA controller. */
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *mregs)
+{
+        struct cppi             *controller;
+
+        controller = kzalloc(sizeof *controller, GFP_KERNEL);
+        if (!controller)
+                return NULL;
+
+        controller->mregs = mregs;
+        controller->tibase = mregs - DAVINCI_BASE_OFFSET;
+
+        controller->musb = musb;
+        controller->controller.start = cppi_controller_start;
+        controller->controller.stop = cppi_controller_stop;
+        controller->controller.channel_alloc = cppi_channel_allocate;
+        controller->controller.channel_release = cppi_channel_release;
+        controller->controller.channel_program = cppi_channel_program;
+        controller->controller.channel_abort = cppi_channel_abort;
+
+        /* NOTE: allocating from on-chip SRAM would give the least
+         * contention for memory access, if that ever matters here.
+         */
+
+        /* setup BufferPool */
+        controller->pool = dma_pool_create("cppi",
+                        controller->musb->controller,
+                        sizeof(struct cppi_descriptor),
+                        CPPI_DESCRIPTOR_ALIGN, 0);
+        if (!controller->pool) {
+                kfree(controller);
+                return NULL;
+        }
+
+        return &controller->controller;
+}
+
+/*
+ *  Destroy a previously-instantiated DMA controller.
+ */
+void dma_controller_destroy(struct dma_controller *c)
+{
+        struct cppi     *cppi;
+
+        cppi = container_of(c, struct cppi, controller);
+
+        /* assert:  caller stopped the controller first */
+        dma_pool_destroy(cppi->pool);
+
+        kfree(cppi);
+}
+
+/*
+ * Context: controller irqlocked, endpoint selected
+ */
+static int cppi_channel_abort(struct dma_channel *channel)
+{
+        struct cppi_channel     *cppi_ch;
+        struct cppi             *controller;
+        void __iomem            *mbase;
+        void __iomem            *tibase;
+        void __iomem            *regs;
+        u32                     value;
+        struct cppi_descriptor  *queue;
+
+        cppi_ch = container_of(channel, struct cppi_channel, channel);
+
+        controller = cppi_ch->controller;
+
+        switch (channel->status) {
+        case MUSB_DMA_STATUS_BUS_ABORT:
+        case MUSB_DMA_STATUS_CORE_ABORT:
+                /* from RX or TX fault irq handler */
+        case MUSB_DMA_STATUS_BUSY:
+                /* the hardware needs shutting down */
+                regs = cppi_ch->hw_ep->regs;
+                break;
+        case MUSB_DMA_STATUS_UNKNOWN:
+        case MUSB_DMA_STATUS_FREE:
+                return 0;
+        default:
+                return -EINVAL;
+        }
+
+        if (!cppi_ch->transmit && cppi_ch->head)
+                cppi_dump_rxq(3, "/abort", cppi_ch);
+
+        mbase = controller->mregs;
+        tibase = controller->tibase;
+
+        queue = cppi_ch->head;
+        cppi_ch->head = NULL;
+        cppi_ch->tail = NULL;
+
+        /* REVISIT should rely on caller having done this,
+         * and caller should rely on us not changing it.
+         * peripheral code is safe ... check host too.
+         */
+        musb_ep_select(mbase, cppi_ch->index + 1);
+
+        if (cppi_ch->transmit) {
+                struct cppi_tx_stateram __iomem *tx_ram;
+                int                     enabled;
+
+                /* mask interrupts raised to signal teardown complete.  */
+                enabled = musb_readl(tibase, DAVINCI_TXCPPI_INTENAB_REG)
+                                & (1 << cppi_ch->index);
+                if (enabled)
+                        musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+                                        (1 << cppi_ch->index));
+
+                /* REVISIT put timeouts on these controller handshakes */
+
+                cppi_dump_tx(6, cppi_ch, " (teardown)");
+
+                /* teardown DMA engine then usb core */
+                do {
+                        value = musb_readl(tibase, DAVINCI_TXCPPI_TEAR_REG);
+                } while (!(value & CPPI_TEAR_READY));
+                musb_writel(tibase, DAVINCI_TXCPPI_TEAR_REG, cppi_ch->index);
+
+                tx_ram = cppi_ch->state_ram;
+                do {
+                        value = musb_readl(&tx_ram->tx_complete, 0);
+                } while (0xFFFFFFFC != value);
+                musb_writel(&tx_ram->tx_complete, 0, 0xFFFFFFFC);
+
+                /* FIXME clean up the transfer state ... here?
+                 * the completion routine should get called with
+                 * an appropriate status code.
+                 */
+
+                value = musb_readw(regs, MUSB_TXCSR);
+                value &= ~MUSB_TXCSR_DMAENAB;
+                value |= MUSB_TXCSR_FLUSHFIFO;
+                musb_writew(regs, MUSB_TXCSR, value);
+                musb_writew(regs, MUSB_TXCSR, value);
+
+                /* re-enable interrupt */
+                if (enabled)
+                        musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+                                        (1 << cppi_ch->index));
+
+                /* While we scrub the TX state RAM, ensure that we clean
+                 * up any interrupt that's currently asserted:
+                 * 1. Write to completion Ptr value 0x1(bit 0 set)
+                 *    (write back mode)
+                 * 2. Write to completion Ptr value 0x0(bit 0 cleared)
+                 *    (compare mode)
+                 * Value written is compared(for bits 31:2) and when
+                 * equal, interrupt is deasserted.
+                 */
+                cppi_reset_tx(tx_ram, 1);
+                musb_writel(&tx_ram->tx_complete, 0, 0);
+
+                cppi_dump_tx(5, cppi_ch, " (done teardown)");
+
+                /* REVISIT tx side _should_ clean up the same way
+                 * as the RX side ... this does no cleanup at all!
+                 */
+
+        } else /* RX */ {
+                u16                     csr;
+
+                /* NOTE: docs don't guarantee any of this works ...  we
+                 * expect that if the usb core stops telling the cppi core
+                 * to pull more data from it, then it'll be safe to flush
+                 * current RX DMA state iff any pending fifo transfer is done.
+                 */
+
+                core_rxirq_disable(tibase, cppi_ch->index + 1);
+
+                /* for host, ensure ReqPkt is never set again */
+                if (is_host_active(cppi_ch->controller->musb)) {
+                        value = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+                        value &= ~((0x3) << (cppi_ch->index * 2));
+                        musb_writel(tibase, DAVINCI_AUTOREQ_REG, value);
+                }
+
+                csr = musb_readw(regs, MUSB_RXCSR);
+
+                /* for host, clear (just) ReqPkt at end of current packet(s) */
+                if (is_host_active(cppi_ch->controller->musb)) {
+                        csr |= MUSB_RXCSR_H_WZC_BITS;
+                        csr &= ~MUSB_RXCSR_H_REQPKT;
+                } else
+                        csr |= MUSB_RXCSR_P_WZC_BITS;
+
+                /* clear dma enable */
+                csr &= ~(MUSB_RXCSR_DMAENAB);
+                musb_writew(regs, MUSB_RXCSR, csr);
+                csr = musb_readw(regs, MUSB_RXCSR);
+
+                /* Quiesce: wait for current dma to finish (if not cleanup).
+                 * We can't use bit zero of stateram->rx_sop, since that
+                 * refers to an entire "DMA packet" not just emptying the
+                 * current fifo.  Most segments need multiple usb packets.
+                 */
+                if (channel->status == MUSB_DMA_STATUS_BUSY)
+                        udelay(50);
+
+                /* scan the current list, reporting any data that was
+                 * transferred and acking any IRQ
+                 */
+                cppi_rx_scan(controller, cppi_ch->index);
+
+                /* clobber the existing state once it's idle
+                 *
+                 * NOTE:  arguably, we should also wait for all the other
+                 * RX channels to quiesce (how??) and then temporarily
+                 * disable RXCPPI_CTRL_REG ... but it seems that we can
+                 * rely on the controller restarting from state ram, with
+                 * only RXCPPI_BUFCNT state being bogus.  BUFCNT will
+                 * correct itself after the next DMA transfer though.
+                 *
+                 * REVISIT does using rndis mode change that?
+                 */
+                cppi_reset_rx(cppi_ch->state_ram);
+
+                /* next DMA request _should_ load cppi head ptr */
+
+                /* ... we don't "free" that list, only mutate it in place.  */
+                cppi_dump_rx(5, cppi_ch, " (done abort)");
+
+                /* clean up previously pending bds */
+                cppi_bd_free(cppi_ch, cppi_ch->last_processed);
+                cppi_ch->last_processed = NULL;
+
+                while (queue) {
+                        struct cppi_descriptor  *tmp = queue->next;
+
+                        cppi_bd_free(cppi_ch, queue);
+                        queue = tmp;
+                }
+        }
+
+        channel->status = MUSB_DMA_STATUS_FREE;
+        cppi_ch->buf_dma = 0;
+        cppi_ch->offset = 0;
+        cppi_ch->buf_len = 0;
+        cppi_ch->maxpacket = 0;
+        return 0;
+}
+
+/* TBD Queries:
+ *
+ * Power Management ... probably turn off cppi during suspend, restart;
+ * check state ram?  Clocking is presumably shared with usb core.
+ */
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
new file mode 100644
index 000000000000..fc5216b5d2c5
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.h
@@ -0,0 +1,133 @@
+/* Copyright (C) 2005-2006 by Texas Instruments */
+
+#ifndef _CPPI_DMA_H_
+#define _CPPI_DMA_H_
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/dmapool.h>
+
+#include "musb_dma.h"
+#include "musb_core.h"
+
+
+/* FIXME fully isolate CPPI from DaVinci ... the "CPPI generic" registers
+ * would seem to be shared with the TUSB6020 (over VLYNQ).
+ */
+
+#include "davinci.h"
+
+
+/* CPPI RX/TX state RAM */
+
+struct cppi_tx_stateram {
+        u32 tx_head;                    /* "DMA packet" head descriptor */
+        u32 tx_buf;
+        u32 tx_current;                 /* current descriptor */
+        u32 tx_buf_current;
+        u32 tx_info;                    /* flags, remaining buflen */
+        u32 tx_rem_len;
+        u32 tx_dummy;                   /* unused */
+        u32 tx_complete;
+};
+
+struct cppi_rx_stateram {
+        u32 rx_skipbytes;
+        u32 rx_head;
+        u32 rx_sop;                     /* "DMA packet" head descriptor */
+        u32 rx_current;                 /* current descriptor */
+        u32 rx_buf_current;
+        u32 rx_len_len;
+        u32 rx_cnt_cnt;
+        u32 rx_complete;
+};
+
+/* hw_options bits in CPPI buffer descriptors */
+#define CPPI_SOP_SET    ((u32)(1 << 31))
+#define CPPI_EOP_SET    ((u32)(1 << 30))
+#define CPPI_OWN_SET    ((u32)(1 << 29))        /* owned by cppi */
+#define CPPI_EOQ_MASK   ((u32)(1 << 28))
+#define CPPI_ZERO_SET   ((u32)(1 << 23))        /* rx saw zlp; tx issues one */
+#define CPPI_RXABT_MASK ((u32)(1 << 19))        /* need more rx buffers */
+
+#define CPPI_RECV_PKTLEN_MASK 0xFFFF
+#define CPPI_BUFFER_LEN_MASK 0xFFFF
+
+#define CPPI_TEAR_READY ((u32)(1 << 31))
+
+/* CPPI data structure definitions */
+
+#define CPPI_DESCRIPTOR_ALIGN   16      /* bytes; 5-dec docs say 4-byte align */
+
+struct cppi_descriptor {
+        /* hardware overlay */
+        u32             hw_next;        /* next buffer descriptor Pointer */
+        u32             hw_bufp;        /* i/o buffer pointer */
+        u32             hw_off_len;     /* buffer_offset16, buffer_length16 */
+        u32             hw_options;     /* flags:  SOP, EOP etc*/
+
+        struct cppi_descriptor *next;
+        dma_addr_t      dma;            /* address of this descriptor */
+        u32             buflen;         /* for RX: original buffer length */
+} __attribute__ ((aligned(CPPI_DESCRIPTOR_ALIGN)));
+
+
+struct cppi;
+
+/* CPPI  Channel Control structure */
+struct cppi_channel {
+        struct dma_channel      channel;
+
+        /* back pointer to the DMA controller structure */
+        struct cppi             *controller;
+
+        /* which direction of which endpoint? */
+        struct musb_hw_ep       *hw_ep;
+        bool                    transmit;
+        u8                      index;
+
+        /* DMA modes:  RNDIS or "transparent" */
+        u8                      is_rndis;
+
+        /* book keeping for current transfer request */
+        dma_addr_t              buf_dma;
+        u32                     buf_len;
+        u32                     maxpacket;
+        u32                     offset;         /* dma requested */
+
+        void __iomem            *state_ram;     /* CPPI state */
+
+        struct cppi_descriptor  *freelist;
+
+        /* BD management fields */
+        struct cppi_descriptor  *head;
+        struct cppi_descriptor  *tail;
+        struct cppi_descriptor  *last_processed;
+
+        /* use tx_complete in host role to track endpoints waiting for
+         * FIFONOTEMPTY to clear.
+         */
+        struct list_head        tx_complete;
+};
+
+/* CPPI DMA controller object */
+struct cppi {
+        struct dma_controller           controller;
+        struct musb                     *musb;
+        void __iomem                    *mregs;         /* Mentor regs */
+        void __iomem                    *tibase;        /* TI/CPPI regs */
+
+        struct cppi_channel             tx[MUSB_C_NUM_EPT - 1];
+        struct cppi_channel             rx[MUSB_C_NUM_EPR - 1];
+
+        struct dma_pool                 *pool;
+
+        struct list_head                tx_complete;
+};
+
+/* irq handling hook */
+extern void cppi_completion(struct musb *, u32 rx, u32 tx);
+
+#endif                          /* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
new file mode 100644
index 000000000000..75baf181a8cd
--- /dev/null
+++ b/drivers/usb/musb/davinci.c
@@ -0,0 +1,462 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/arch/gpio.h>
+#include <asm/mach-types.h>
+
+#include "musb_core.h"
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#include <asm/arch/i2c-client.h>
+#endif
+
+#include "davinci.h"
+#include "cppi_dma.h"
+
+
+/* REVISIT (PM) we should be able to keep the PHY in low power mode most
+ * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
+ * and, when in host mode, autosuspending idle root ports... PHYPLLON
+ * (overriding SUSPENDM?) then likely needs to stay off.
+ */
+
+static inline void phy_on(void)
+{
+        /* start the on-chip PHY and its PLL */
+        __raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON,
+                        (void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR));
+        while ((__raw_readl((void __force __iomem *)
+                                IO_ADDRESS(USBPHY_CTL_PADDR))
+                        & USBPHY_PHYCLKGD) == 0)
+                cpu_relax();
+}
+
+static inline void phy_off(void)
+{
+        /* powerdown the on-chip PHY and its oscillator */
+        __raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *)
+                        IO_ADDRESS(USBPHY_CTL_PADDR));
+}
+
+static int dma_off = 1;
+
+void musb_platform_enable(struct musb *musb)
+{
+        u32     tmp, old, val;
+
+        /* workaround:  setup irqs through both register sets */
+        tmp = (musb->epmask & DAVINCI_USB_TX_ENDPTS_MASK)
+                        << DAVINCI_USB_TXINT_SHIFT;
+        musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+        old = tmp;
+        tmp = (musb->epmask & (0xfffe & DAVINCI_USB_RX_ENDPTS_MASK))
+                        << DAVINCI_USB_RXINT_SHIFT;
+        musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+        tmp |= old;
+
+        val = ~MUSB_INTR_SOF;
+        tmp |= ((val & 0x01ff) << DAVINCI_USB_USBINT_SHIFT);
+        musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+
+        if (is_dma_capable() && !dma_off)
+                printk(KERN_WARNING "%s %s: dma not reactivated\n",
+                                __FILE__, __func__);
+        else
+                dma_off = 0;
+
+        /* force a DRVVBUS irq so we can start polling for ID change */
+        if (is_otg_enabled(musb))
+                musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+                        DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT);
+}
+
+/*
+ * Disable the HDRC and flush interrupts
+ */
+void musb_platform_disable(struct musb *musb)
+{
+        /* because we don't set CTRLR.UINT, "important" to:
+         *  - not read/write INTRUSB/INTRUSBE
+         *  - (except during initial setup, as workaround)
+         *  - use INTSETR/INTCLRR instead
+         */
+        musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_CLR_REG,
+                          DAVINCI_USB_USBINT_MASK
+                        | DAVINCI_USB_TXINT_MASK
+                        | DAVINCI_USB_RXINT_MASK);
+        musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+        musb_writel(musb->ctrl_base, DAVINCI_USB_EOI_REG, 0);
+
+        if (is_dma_capable() && !dma_off)
+                WARNING("dma still active\n");
+}
+
+
+/* REVISIT it's not clear whether DaVinci can support full OTG.  */
+
+static int vbus_state = -1;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#define portstate(stmt)         stmt
+#else
+#define portstate(stmt)
+#endif
+
+
+/* VBUS SWITCHING IS BOARD-SPECIFIC */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#ifndef CONFIG_MACH_DAVINCI_EVM_OTG
+
+/* I2C operations are always synchronous, and require a task context.
+ * With unloaded systems, using the shared workqueue seems to suffice
+ * to satisfy the 100msec A_WAIT_VRISE timeout...
+ */
+static void evm_deferred_drvvbus(struct work_struct *ignored)
+{
+        davinci_i2c_expander_op(0x3a, USB_DRVVBUS, vbus_state);
+        vbus_state = !vbus_state;
+}
+static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
+#endif  /* modified board */
+#endif  /* EVM */
+
+static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+{
+        if (is_on)
+                is_on = 1;
+
+        if (vbus_state == is_on)
+                return;
+        vbus_state = !is_on;            /* 0/1 vs "-1 == unknown/init" */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+        if (machine_is_davinci_evm()) {
+#ifdef CONFIG_MACH_DAVINCI_EVM_OTG
+                /* modified EVM board switching VBUS with GPIO(6) not I2C
+                 * NOTE:  PINMUX0.RGB888 (bit23) must be clear
+                 */
+                if (is_on)
+                        gpio_set(GPIO(6));
+                else
+                        gpio_clear(GPIO(6));
+                immediate = 1;
+#else
+                if (immediate)
+                        davinci_i2c_expander_op(0x3a, USB_DRVVBUS, !is_on);
+                else
+                        schedule_work(&evm_vbus_work);
+#endif
+        }
+#endif
+        if (immediate)
+                vbus_state = is_on;
+}
+
+static void davinci_set_vbus(struct musb *musb, int is_on)
+{
+        WARN_ON(is_on && is_peripheral_active(musb));
+        davinci_source_power(musb, is_on, 0);
+}
+
+
+#define POLL_SECONDS    2
+
+static struct timer_list otg_workaround;
+
+static void otg_timer(unsigned long _musb)
+{
+        struct musb             *musb = (void *)_musb;
+        void __iomem            *mregs = musb->mregs;
+        u8                      devctl;
+        unsigned long           flags;
+
+        /* We poll because DaVinci's won't expose several OTG-critical
+        * status change events (from the transceiver) otherwise.
+         */
+        devctl = musb_readb(mregs, MUSB_DEVCTL);
+        DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
+
+        spin_lock_irqsave(&musb->lock, flags);
+        switch (musb->xceiv.state) {
+        case OTG_STATE_A_WAIT_VFALL:
+                /* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
+                 * seems to mis-handle session "start" otherwise (or in our
+                 * case "recover"), in routine "VBUS was valid by the time
+                 * VBUSERR got reported during enumeration" cases.
+                 */
+                if (devctl & MUSB_DEVCTL_VBUS) {
+                        mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+                        break;
+                }
+                musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+                musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+                        MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
+                break;
+        case OTG_STATE_B_IDLE:
+                if (!is_peripheral_enabled(musb))
+                        break;
+
+                /* There's no ID-changed IRQ, so we have no good way to tell
+                 * when to switch to the A-Default state machine (by setting
+                 * the DEVCTL.SESSION flag).
+                 *
+                 * Workaround:  whenever we're in B_IDLE, try setting the
+                 * session flag every few seconds.  If it works, ID was
+                 * grounded and we're now in the A-Default state machine.
+                 *
+                 * NOTE setting the session flag is _supposed_ to trigger
+                 * SRP, but clearly it doesn't.
+                 */
+                musb_writeb(mregs, MUSB_DEVCTL,
+                                devctl | MUSB_DEVCTL_SESSION);
+                devctl = musb_readb(mregs, MUSB_DEVCTL);
+                if (devctl & MUSB_DEVCTL_BDEVICE)
+                        mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+                else
+                        musb->xceiv.state = OTG_STATE_A_IDLE;
+                break;
+        default:
+                break;
+        }
+        spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static irqreturn_t davinci_interrupt(int irq, void *__hci)
+{
+        unsigned long   flags;
+        irqreturn_t     retval = IRQ_NONE;
+        struct musb     *musb = __hci;
+        void __iomem    *tibase = musb->ctrl_base;
+        u32             tmp;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        /* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
+         * the Mentor registers (except for setup), use the TI ones and EOI.
+         *
+         * Docs describe irq "vector" registers asociated with the CPPI and
+         * USB EOI registers.  These hold a bitmask corresponding to the
+         * current IRQ, not an irq handler address.  Would using those bits
+         * resolve some of the races observed in this dispatch code??
+         */
+
+        /* CPPI interrupts share the same IRQ line, but have their own
+         * mask, state, "vector", and EOI registers.
+         */
+        if (is_cppi_enabled()) {
+                u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+                u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+                if (cppi_tx || cppi_rx) {
+                        DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx);
+                        cppi_completion(musb, cppi_rx, cppi_tx);
+                        retval = IRQ_HANDLED;
+                }
+        }
+
+        /* ack and handle non-CPPI interrupts */
+        tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
+        musb_writel(tibase, DAVINCI_USB_INT_SRC_CLR_REG, tmp);
+        DBG(4, "IRQ %08x\n", tmp);
+
+        musb->int_rx = (tmp & DAVINCI_USB_RXINT_MASK)
+                        >> DAVINCI_USB_RXINT_SHIFT;
+        musb->int_tx = (tmp & DAVINCI_USB_TXINT_MASK)
+                        >> DAVINCI_USB_TXINT_SHIFT;
+        musb->int_usb = (tmp & DAVINCI_USB_USBINT_MASK)
+                        >> DAVINCI_USB_USBINT_SHIFT;
+
+        /* DRVVBUS irqs are the only proxy we have (a very poor one!) for
+         * DaVinci's missing ID change IRQ.  We need an ID change IRQ to
+         * switch appropriately between halves of the OTG state machine.
+         * Managing DEVCTL.SESSION per Mentor docs requires we know its
+         * value, but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+         * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+         */
+        if (tmp & (DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT)) {
+                int     drvvbus = musb_readl(tibase, DAVINCI_USB_STAT_REG);
+                void __iomem *mregs = musb->mregs;
+                u8      devctl = musb_readb(mregs, MUSB_DEVCTL);
+                int     err = musb->int_usb & MUSB_INTR_VBUSERROR;
+
+                err = is_host_enabled(musb)
+                                && (musb->int_usb & MUSB_INTR_VBUSERROR);
+                if (err) {
+                        /* The Mentor core doesn't debounce VBUS as needed
+                         * to cope with device connect current spikes. This
+                         * means it's not uncommon for bus-powered devices
+                         * to get VBUS errors during enumeration.
+                         *
+                         * This is a workaround, but newer RTL from Mentor
+                         * seems to allow a better one: "re"starting sessions
+                         * without waiting (on EVM, a **long** time) for VBUS
+                         * to stop registering in devctl.
+                         */
+                        musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+                        musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+                        mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+                        WARNING("VBUS error workaround (delay coming)\n");
+                } else if (is_host_enabled(musb) && drvvbus) {
+                        musb->is_active = 1;
+                        MUSB_HST_MODE(musb);
+                        musb->xceiv.default_a = 1;
+                        musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+                        portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+                        del_timer(&otg_workaround);
+                } else {
+                        musb->is_active = 0;
+                        MUSB_DEV_MODE(musb);
+                        musb->xceiv.default_a = 0;
+                        musb->xceiv.state = OTG_STATE_B_IDLE;
+                        portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+                }
+
+                /* NOTE:  this must complete poweron within 100 msec */
+                davinci_source_power(musb, drvvbus, 0);
+                DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
+                                drvvbus ? "on" : "off",
+                                otg_state_string(musb),
+                                err ? " ERROR" : "",
+                                devctl);
+                retval = IRQ_HANDLED;
+        }
+
+        if (musb->int_tx || musb->int_rx || musb->int_usb)
+                retval |= musb_interrupt(musb);
+
+        /* irq stays asserted until EOI is written */
+        musb_writel(tibase, DAVINCI_USB_EOI_REG, 0);
+
+        /* poll for ID change */
+        if (is_otg_enabled(musb)
+                        && musb->xceiv.state == OTG_STATE_B_IDLE)
+                mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        /* REVISIT we sometimes get unhandled IRQs
+         * (e.g. ep0).  not clear why...
+         */
+        if (retval != IRQ_HANDLED)
+                DBG(5, "unhandled? %08x\n", tmp);
+        return IRQ_HANDLED;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+        void __iomem    *tibase = musb->ctrl_base;
+        u32             revision;
+
+        musb->mregs += DAVINCI_BASE_OFFSET;
+#if 0
+        /* REVISIT there's something odd about clocking, this
+         * didn't appear do the job ...
+         */
+        musb->clock = clk_get(pDevice, "usb");
+        if (IS_ERR(musb->clock))
+                return PTR_ERR(musb->clock);
+
+        status = clk_enable(musb->clock);
+        if (status < 0)
+                return -ENODEV;
+#endif
+
+        /* returns zero if e.g. not clocked */
+        revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
+        if (revision == 0)
+                return -ENODEV;
+
+        if (is_host_enabled(musb))
+                setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+
+        musb->board_set_vbus = davinci_set_vbus;
+        davinci_source_power(musb, 0, 1);
+
+        /* reset the controller */
+        musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
+
+        /* start the on-chip PHY and its PLL */
+        phy_on();
+
+        msleep(5);
+
+        /* NOTE:  irqs are in mixed mode, not bypass to pure-musb */
+        pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
+                revision, __raw_readl((void __force __iomem *)
+                                IO_ADDRESS(USBPHY_CTL_PADDR)),
+                musb_readb(tibase, DAVINCI_USB_CTRL_REG));
+
+        musb->isr = davinci_interrupt;
+        return 0;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+        if (is_host_enabled(musb))
+                del_timer_sync(&otg_workaround);
+
+        davinci_source_power(musb, 0 /*off*/, 1);
+
+        /* delay, to avoid problems with module reload */
+        if (is_host_enabled(musb) && musb->xceiv.default_a) {
+                int     maxdelay = 30;
+                u8      devctl, warn = 0;
+
+                /* if there's no peripheral connected, this can take a
+                 * long time to fall, especially on EVM with huge C133.
+                 */
+                do {
+                        devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+                        if (!(devctl & MUSB_DEVCTL_VBUS))
+                                break;
+                        if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
+                                warn = devctl & MUSB_DEVCTL_VBUS;
+                                DBG(1, "VBUS %d\n",
+                                        warn >> MUSB_DEVCTL_VBUS_SHIFT);
+                        }
+                        msleep(1000);
+                        maxdelay--;
+                } while (maxdelay > 0);
+
+                /* in OTG mode, another host might be connected */
+                if (devctl & MUSB_DEVCTL_VBUS)
+                        DBG(1, "VBUS off timeout (devctl %02x)\n", devctl);
+        }
+
+        phy_off();
+        return 0;
+}
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
new file mode 100644
index 000000000000..7fb6238e270f
--- /dev/null
+++ b/drivers/usb/musb/davinci.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_HDRDF_H__
+#define __MUSB_HDRDF_H__
+
+/*
+ * DaVinci-specific definitions
+ */
+
+/* Integrated highspeed/otg PHY */
+#define USBPHY_CTL_PADDR        (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_PHYCLKGD         (1 << 8)
+#define USBPHY_SESNDEN          (1 << 7)        /* v(sess_end) comparator */
+#define USBPHY_VBDTCTEN         (1 << 6)        /* v(bus) comparator */
+#define USBPHY_PHYPLLON         (1 << 4)        /* override pll suspend */
+#define USBPHY_CLKO1SEL         (1 << 3)
+#define USBPHY_OSCPDWN          (1 << 2)
+#define USBPHY_PHYPDWN          (1 << 0)
+
+/* For now include usb OTG module registers here */
+#define DAVINCI_USB_VERSION_REG         0x00
+#define DAVINCI_USB_CTRL_REG            0x04
+#define DAVINCI_USB_STAT_REG            0x08
+#define DAVINCI_RNDIS_REG               0x10
+#define DAVINCI_AUTOREQ_REG             0x14
+#define DAVINCI_USB_INT_SOURCE_REG      0x20
+#define DAVINCI_USB_INT_SET_REG         0x24
+#define DAVINCI_USB_INT_SRC_CLR_REG     0x28
+#define DAVINCI_USB_INT_MASK_REG        0x2c
+#define DAVINCI_USB_INT_MASK_SET_REG    0x30
+#define DAVINCI_USB_INT_MASK_CLR_REG    0x34
+#define DAVINCI_USB_INT_SRC_MASKED_REG  0x38
+#define DAVINCI_USB_EOI_REG             0x3c
+#define DAVINCI_USB_EOI_INTVEC          0x40
+
+/* BEGIN CPPI-generic (?) */
+
+/* CPPI related registers */
+#define DAVINCI_TXCPPI_CTRL_REG         0x80
+#define DAVINCI_TXCPPI_TEAR_REG         0x84
+#define DAVINCI_CPPI_EOI_REG            0x88
+#define DAVINCI_CPPI_INTVEC_REG         0x8c
+#define DAVINCI_TXCPPI_MASKED_REG       0x90
+#define DAVINCI_TXCPPI_RAW_REG          0x94
+#define DAVINCI_TXCPPI_INTENAB_REG      0x98
+#define DAVINCI_TXCPPI_INTCLR_REG       0x9c
+
+#define DAVINCI_RXCPPI_CTRL_REG         0xC0
+#define DAVINCI_RXCPPI_MASKED_REG       0xD0
+#define DAVINCI_RXCPPI_RAW_REG          0xD4
+#define DAVINCI_RXCPPI_INTENAB_REG      0xD8
+#define DAVINCI_RXCPPI_INTCLR_REG       0xDC
+
+#define DAVINCI_RXCPPI_BUFCNT0_REG      0xE0
+#define DAVINCI_RXCPPI_BUFCNT1_REG      0xE4
+#define DAVINCI_RXCPPI_BUFCNT2_REG      0xE8
+#define DAVINCI_RXCPPI_BUFCNT3_REG      0xEC
+
+/* CPPI state RAM entries */
+#define DAVINCI_CPPI_STATERAM_BASE_OFFSET   0x100
+
+#define DAVINCI_TXCPPI_STATERAM_OFFSET(chnum) \
+        (DAVINCI_CPPI_STATERAM_BASE_OFFSET +       ((chnum) * 0x40))
+#define DAVINCI_RXCPPI_STATERAM_OFFSET(chnum) \
+        (DAVINCI_CPPI_STATERAM_BASE_OFFSET + 0x20 + ((chnum) * 0x40))
+
+/* CPPI masks */
+#define DAVINCI_DMA_CTRL_ENABLE         1
+#define DAVINCI_DMA_CTRL_DISABLE        0
+
+#define DAVINCI_DMA_ALL_CHANNELS_ENABLE 0xF
+#define DAVINCI_DMA_ALL_CHANNELS_DISABLE 0xF
+
+/* END CPPI-generic (?) */
+
+#define DAVINCI_USB_TX_ENDPTS_MASK      0x1f            /* ep0 + 4 tx */
+#define DAVINCI_USB_RX_ENDPTS_MASK      0x1e            /* 4 rx */
+
+#define DAVINCI_USB_USBINT_SHIFT        16
+#define DAVINCI_USB_TXINT_SHIFT         0
+#define DAVINCI_USB_RXINT_SHIFT         8
+
+#define DAVINCI_INTR_DRVVBUS            0x0100
+
+#define DAVINCI_USB_USBINT_MASK         0x01ff0000      /* 8 Mentor, DRVVBUS */
+#define DAVINCI_USB_TXINT_MASK \
+        (DAVINCI_USB_TX_ENDPTS_MASK << DAVINCI_USB_TXINT_SHIFT)
+#define DAVINCI_USB_RXINT_MASK \
+        (DAVINCI_USB_RX_ENDPTS_MASK << DAVINCI_USB_RXINT_SHIFT)
+
+#define DAVINCI_BASE_OFFSET             0x400
+
+#endif  /* __MUSB_HDRDF_H__ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
new file mode 100644
index 000000000000..d68ec6daf335
--- /dev/null
+++ b/drivers/usb/musb/musb_core.c
@@ -0,0 +1,2261 @@
+/*
+ * MUSB OTG driver core code
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
+ *
+ * This consists of a Host Controller Driver (HCD) and a peripheral
+ * controller driver implementing the "Gadget" API; OTG support is
+ * in the works.  These are normal Linux-USB controller drivers which
+ * use IRQs and have no dedicated thread.
+ *
+ * This version of the driver has only been used with products from
+ * Texas Instruments.  Those products integrate the Inventra logic
+ * with other DMA, IRQ, and bus modules, as well as other logic that
+ * needs to be reflected in this driver.
+ *
+ *
+ * NOTE:  the original Mentor code here was pretty much a collection
+ * of mechanisms that don't seem to have been fully integrated/working
+ * for *any* Linux kernel version.  This version aims at Linux 2.6.now,
+ * Key open issues include:
+ *
+ *  - Lack of host-side transaction scheduling, for all transfer types.
+ *    The hardware doesn't do it; instead, software must.
+ *
+ *    This is not an issue for OTG devices that don't support external
+ *    hubs, but for more "normal" USB hosts it's a user issue that the
+ *    "multipoint" support doesn't scale in the expected ways.  That
+ *    includes DaVinci EVM in a common non-OTG mode.
+ *
+ *      * Control and bulk use dedicated endpoints, and there's as
+ *        yet no mechanism to either (a) reclaim the hardware when
+ *        peripherals are NAKing, which gets complicated with bulk
+ *        endpoints, or (b) use more than a single bulk endpoint in
+ *        each direction.
+ *
+ *        RESULT:  one device may be perceived as blocking another one.
+ *
+ *      * Interrupt and isochronous will dynamically allocate endpoint
+ *        hardware, but (a) there's no record keeping for bandwidth;
+ *        (b) in the common case that few endpoints are available, there
+ *        is no mechanism to reuse endpoints to talk to multiple devices.
+ *
+ *        RESULT:  At one extreme, bandwidth can be overcommitted in
+ *        some hardware configurations, no faults will be reported.
+ *        At the other extreme, the bandwidth capabilities which do
+ *        exist tend to be severely undercommitted.  You can't yet hook
+ *        up both a keyboard and a mouse to an external USB hub.
+ */
+
+/*
+ * This gets many kinds of configuration information:
+ *      - Kconfig for everything user-configurable
+ *      - <asm/arch/hdrc_cnf.h> for SOC or family details
+ *      - platform_device for addressing, irq, and platform_data
+ *      - platform_data is mostly for board-specific informarion
+ *
+ * Most of the conditional compilation will (someday) vanish.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#ifdef  CONFIG_ARM
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/mach-types.h>
+#endif
+
+#include "musb_core.h"
+
+
+#ifdef CONFIG_ARCH_DAVINCI
+#include "davinci.h"
+#endif
+
+
+
+#if MUSB_DEBUG > 0
+unsigned debug = MUSB_DEBUG;
+module_param(debug, uint, 0);
+MODULE_PARM_DESC(debug, "initial debug message level");
+
+#define MUSB_VERSION_SUFFIX     "/dbg"
+#endif
+
+#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
+#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
+
+#define MUSB_VERSION_BASE "6.0"
+
+#ifndef MUSB_VERSION_SUFFIX
+#define MUSB_VERSION_SUFFIX     ""
+#endif
+#define MUSB_VERSION    MUSB_VERSION_BASE MUSB_VERSION_SUFFIX
+
+#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
+
+#define MUSB_DRIVER_NAME "musb_hdrc"
+const char musb_driver_name[] = MUSB_DRIVER_NAME;
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct musb *dev_to_musb(struct device *dev)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        /* usbcore insists dev->driver_data is a "struct hcd *" */
+        return hcd_to_musb(dev_get_drvdata(dev));
+#else
+        return dev_get_drvdata(dev);
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef CONFIG_USB_TUSB6010
+/*
+ * Load an endpoint's FIFO
+ */
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
+{
+        void __iomem *fifo = hw_ep->fifo;
+
+        prefetch((u8 *)src);
+
+        DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+                        'T', hw_ep->epnum, fifo, len, src);
+
+        /* we can't assume unaligned reads work */
+        if (likely((0x01 & (unsigned long) src) == 0)) {
+                u16     index = 0;
+
+                /* best case is 32bit-aligned source address */
+                if ((0x02 & (unsigned long) src) == 0) {
+                        if (len >= 4) {
+                                writesl(fifo, src + index, len >> 2);
+                                index += len & ~0x03;
+                        }
+                        if (len & 0x02) {
+                                musb_writew(fifo, 0, *(u16 *)&src[index]);
+                                index += 2;
+                        }
+                } else {
+                        if (len >= 2) {
+                                writesw(fifo, src + index, len >> 1);
+                                index += len & ~0x01;
+                        }
+                }
+                if (len & 0x01)
+                        musb_writeb(fifo, 0, src[index]);
+        } else  {
+                /* byte aligned */
+                writesb(fifo, src, len);
+        }
+}
+
+/*
+ * Unload an endpoint's FIFO
+ */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+        void __iomem *fifo = hw_ep->fifo;
+
+        DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+                        'R', hw_ep->epnum, fifo, len, dst);
+
+        /* we can't assume unaligned writes work */
+        if (likely((0x01 & (unsigned long) dst) == 0)) {
+                u16     index = 0;
+
+                /* best case is 32bit-aligned destination address */
+                if ((0x02 & (unsigned long) dst) == 0) {
+                        if (len >= 4) {
+                                readsl(fifo, dst, len >> 2);
+                                index = len & ~0x03;
+                        }
+                        if (len & 0x02) {
+                                *(u16 *)&dst[index] = musb_readw(fifo, 0);
+                                index += 2;
+                        }
+                } else {
+                        if (len >= 2) {
+                                readsw(fifo, dst, len >> 1);
+                                index = len & ~0x01;
+                        }
+                }
+                if (len & 0x01)
+                        dst[index] = musb_readb(fifo, 0);
+        } else  {
+                /* byte aligned */
+                readsb(fifo, dst, len);
+        }
+}
+
+#endif  /* normal PIO */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* for high speed test mode; see USB 2.0 spec 7.1.20 */
+static const u8 musb_test_packet[53] = {
+        /* implicit SYNC then DATA0 to start */
+
+        /* JKJKJKJK x9 */
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* JJKKJJKK x8 */
+        0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+        /* JJJJKKKK x8 */
+        0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
+        /* JJJJJJJKKKKKKK x8 */
+        0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+        /* JJJJJJJK x8 */
+        0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
+        /* JKKKKKKK x10, JK */
+        0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
+
+        /* implicit CRC16 then EOP to end */
+};
+
+void musb_load_testpacket(struct musb *musb)
+{
+        void __iomem    *regs = musb->endpoints[0].regs;
+
+        musb_ep_select(musb->mregs, 0);
+        musb_write_fifo(musb->control_ep,
+                        sizeof(musb_test_packet), musb_test_packet);
+        musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
+}
+
+/*-------------------------------------------------------------------------*/
+
+const char *otg_state_string(struct musb *musb)
+{
+        switch (musb->xceiv.state) {
+        case OTG_STATE_A_IDLE:          return "a_idle";
+        case OTG_STATE_A_WAIT_VRISE:    return "a_wait_vrise";
+        case OTG_STATE_A_WAIT_BCON:     return "a_wait_bcon";
+        case OTG_STATE_A_HOST:          return "a_host";
+        case OTG_STATE_A_SUSPEND:       return "a_suspend";
+        case OTG_STATE_A_PERIPHERAL:    return "a_peripheral";
+        case OTG_STATE_A_WAIT_VFALL:    return "a_wait_vfall";
+        case OTG_STATE_A_VBUS_ERR:      return "a_vbus_err";
+        case OTG_STATE_B_IDLE:          return "b_idle";
+        case OTG_STATE_B_SRP_INIT:      return "b_srp_init";
+        case OTG_STATE_B_PERIPHERAL:    return "b_peripheral";
+        case OTG_STATE_B_WAIT_ACON:     return "b_wait_acon";
+        case OTG_STATE_B_HOST:          return "b_host";
+        default:                        return "UNDEFINED";
+        }
+}
+
+#ifdef  CONFIG_USB_MUSB_OTG
+
+/*
+ * See also USB_OTG_1-3.pdf 6.6.5 Timers
+ * REVISIT: Are the other timers done in the hardware?
+ */
+#define TB_ASE0_BRST            100     /* Min 3.125 ms */
+
+/*
+ * Handles OTG hnp timeouts, such as b_ase0_brst
+ */
+void musb_otg_timer_func(unsigned long data)
+{
+        struct musb     *musb = (struct musb *)data;
+        unsigned long   flags;
+
+        spin_lock_irqsave(&musb->lock, flags);
+        switch (musb->xceiv.state) {
+        case OTG_STATE_B_WAIT_ACON:
+                DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
+                musb_g_disconnect(musb);
+                musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+                musb->is_active = 0;
+                break;
+        case OTG_STATE_A_WAIT_BCON:
+                DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
+                musb_hnp_stop(musb);
+                break;
+        default:
+                DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
+        }
+        musb->ignore_disconnect = 0;
+        spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0);
+
+/*
+ * Stops the B-device HNP state. Caller must take care of locking.
+ */
+void musb_hnp_stop(struct musb *musb)
+{
+        struct usb_hcd  *hcd = musb_to_hcd(musb);
+        void __iomem    *mbase = musb->mregs;
+        u8      reg;
+
+        switch (musb->xceiv.state) {
+        case OTG_STATE_A_PERIPHERAL:
+        case OTG_STATE_A_WAIT_VFALL:
+        case OTG_STATE_A_WAIT_BCON:
+                DBG(1, "HNP: Switching back to A-host\n");
+                musb_g_disconnect(musb);
+                musb->xceiv.state = OTG_STATE_A_IDLE;
+                MUSB_HST_MODE(musb);
+                musb->is_active = 0;
+                break;
+        case OTG_STATE_B_HOST:
+                DBG(1, "HNP: Disabling HR\n");
+                hcd->self.is_b_host = 0;
+                musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+                MUSB_DEV_MODE(musb);
+                reg = musb_readb(mbase, MUSB_POWER);
+                reg |= MUSB_POWER_SUSPENDM;
+                musb_writeb(mbase, MUSB_POWER, reg);
+                /* REVISIT: Start SESSION_REQUEST here? */
+                break;
+        default:
+                DBG(1, "HNP: Stopping in unknown state %s\n",
+                        otg_state_string(musb));
+        }
+
+        /*
+         * When returning to A state after HNP, avoid hub_port_rebounce(),
+         * which cause occasional OPT A "Did not receive reset after connect"
+         * errors.
+         */
+        musb->port1_status &=
+                ~(1 << USB_PORT_FEAT_C_CONNECTION);
+}
+
+#endif
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+
+#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
+                | MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
+                | MUSB_INTR_RESET)
+
+static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
+                                u8 devctl, u8 power)
+{
+        irqreturn_t handled = IRQ_NONE;
+        void __iomem *mbase = musb->mregs;
+
+        DBG(3, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
+                int_usb);
+
+        /* in host mode, the peripheral may issue remote wakeup.
+         * in peripheral mode, the host may resume the link.
+         * spurious RESUME irqs happen too, paired with SUSPEND.
+         */
+        if (int_usb & MUSB_INTR_RESUME) {
+                handled = IRQ_HANDLED;
+                DBG(3, "RESUME (%s)\n", otg_state_string(musb));
+
+                if (devctl & MUSB_DEVCTL_HM) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+                        switch (musb->xceiv.state) {
+                        case OTG_STATE_A_SUSPEND:
+                                /* remote wakeup?  later, GetPortStatus
+                                 * will stop RESUME signaling
+                                 */
+
+                                if (power & MUSB_POWER_SUSPENDM) {
+                                        /* spurious */
+                                        musb->int_usb &= ~MUSB_INTR_SUSPEND;
+                                        DBG(2, "Spurious SUSPENDM\n");
+                                        break;
+                                }
+
+                                power &= ~MUSB_POWER_SUSPENDM;
+                                musb_writeb(mbase, MUSB_POWER,
+                                                power | MUSB_POWER_RESUME);
+
+                                musb->port1_status |=
+                                                (USB_PORT_STAT_C_SUSPEND << 16)
+                                                | MUSB_PORT_STAT_RESUME;
+                                musb->rh_timer = jiffies
+                                                + msecs_to_jiffies(20);
+
+                                musb->xceiv.state = OTG_STATE_A_HOST;
+                                musb->is_active = 1;
+                                usb_hcd_resume_root_hub(musb_to_hcd(musb));
+                                break;
+                        case OTG_STATE_B_WAIT_ACON:
+                                musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+                                musb->is_active = 1;
+                                MUSB_DEV_MODE(musb);
+                                break;
+                        default:
+                                WARNING("bogus %s RESUME (%s)\n",
+                                        "host",
+                                        otg_state_string(musb));
+                        }
+#endif
+                } else {
+                        switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+                        case OTG_STATE_A_SUSPEND:
+                                /* possibly DISCONNECT is upcoming */
+                                musb->xceiv.state = OTG_STATE_A_HOST;
+                                usb_hcd_resume_root_hub(musb_to_hcd(musb));
+                                break;
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+                        case OTG_STATE_B_WAIT_ACON:
+                        case OTG_STATE_B_PERIPHERAL:
+                                /* disconnect while suspended?  we may
+                                 * not get a disconnect irq...
+                                 */
+                                if ((devctl & MUSB_DEVCTL_VBUS)
+                                                != (3 << MUSB_DEVCTL_VBUS_SHIFT)
+                                                ) {
+                                        musb->int_usb |= MUSB_INTR_DISCONNECT;
+                                        musb->int_usb &= ~MUSB_INTR_SUSPEND;
+                                        break;
+                                }
+                                musb_g_resume(musb);
+                                break;
+                        case OTG_STATE_B_IDLE:
+                                musb->int_usb &= ~MUSB_INTR_SUSPEND;
+                                break;
+#endif
+                        default:
+                                WARNING("bogus %s RESUME (%s)\n",
+                                        "peripheral",
+                                        otg_state_string(musb));
+                        }
+                }
+        }
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        /* see manual for the order of the tests */
+        if (int_usb & MUSB_INTR_SESSREQ) {
+                DBG(1, "SESSION_REQUEST (%s)\n", otg_state_string(musb));
+
+                /* IRQ arrives from ID pin sense or (later, if VBUS power
+                 * is removed) SRP.  responses are time critical:
+                 *  - turn on VBUS (with silicon-specific mechanism)
+                 *  - go through A_WAIT_VRISE
+                 *  - ... to A_WAIT_BCON.
+                 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
+                 */
+                musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+                musb->ep0_stage = MUSB_EP0_START;
+                musb->xceiv.state = OTG_STATE_A_IDLE;
+                MUSB_HST_MODE(musb);
+                musb_set_vbus(musb, 1);
+
+                handled = IRQ_HANDLED;
+        }
+
+        if (int_usb & MUSB_INTR_VBUSERROR) {
+                int     ignore = 0;
+
+                /* During connection as an A-Device, we may see a short
+                 * current spikes causing voltage drop, because of cable
+                 * and peripheral capacitance combined with vbus draw.
+                 * (So: less common with truly self-powered devices, where
+                 * vbus doesn't act like a power supply.)
+                 *
+                 * Such spikes are short; usually less than ~500 usec, max
+                 * of ~2 msec.  That is, they're not sustained overcurrent
+                 * errors, though they're reported using VBUSERROR irqs.
+                 *
+                 * Workarounds:  (a) hardware: use self powered devices.
+                 * (b) software:  ignore non-repeated VBUS errors.
+                 *
+                 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
+                 * make trouble here, keeping VBUS < 4.4V ?
+                 */
+                switch (musb->xceiv.state) {
+                case OTG_STATE_A_HOST:
+                        /* recovery is dicey once we've gotten past the
+                         * initial stages of enumeration, but if VBUS
+                         * stayed ok at the other end of the link, and
+                         * another reset is due (at least for high speed,
+                         * to redo the chirp etc), it might work OK...
+                         */
+                case OTG_STATE_A_WAIT_BCON:
+                case OTG_STATE_A_WAIT_VRISE:
+                        if (musb->vbuserr_retry) {
+                                musb->vbuserr_retry--;
+                                ignore = 1;
+                                devctl |= MUSB_DEVCTL_SESSION;
+                                musb_writeb(mbase, MUSB_DEVCTL, devctl);
+                        } else {
+                                musb->port1_status |=
+                                          (1 << USB_PORT_FEAT_OVER_CURRENT)
+                                        | (1 << USB_PORT_FEAT_C_OVER_CURRENT);
+                        }
+                        break;
+                default:
+                        break;
+                }
+
+                DBG(1, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
+                                otg_state_string(musb),
+                                devctl,
+                                ({ char *s;
+                                switch (devctl & MUSB_DEVCTL_VBUS) {
+                                case 0 << MUSB_DEVCTL_VBUS_SHIFT:
+                                        s = "<SessEnd"; break;
+                                case 1 << MUSB_DEVCTL_VBUS_SHIFT:
+                                        s = "<AValid"; break;
+                                case 2 << MUSB_DEVCTL_VBUS_SHIFT:
+                                        s = "<VBusValid"; break;
+                                /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
+                                default:
+                                        s = "VALID"; break;
+                                }; s; }),
+                                VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
+                                musb->port1_status);
+
+                /* go through A_WAIT_VFALL then start a new session */
+                if (!ignore)
+                        musb_set_vbus(musb, 0);
+                handled = IRQ_HANDLED;
+        }
+
+        if (int_usb & MUSB_INTR_CONNECT) {
+                struct usb_hcd *hcd = musb_to_hcd(musb);
+
+                handled = IRQ_HANDLED;
+                musb->is_active = 1;
+                set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+                musb->ep0_stage = MUSB_EP0_START;
+
+#ifdef CONFIG_USB_MUSB_OTG
+                /* flush endpoints when transitioning from Device Mode */
+                if (is_peripheral_active(musb)) {
+                        /* REVISIT HNP; just force disconnect */
+                }
+                musb_writew(mbase, MUSB_INTRTXE, musb->epmask);
+                musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe);
+                musb_writeb(mbase, MUSB_INTRUSBE, 0xf7);
+#endif
+                musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
+                                        |USB_PORT_STAT_HIGH_SPEED
+                                        |USB_PORT_STAT_ENABLE
+                                        );
+                musb->port1_status |= USB_PORT_STAT_CONNECTION
+                                        |(USB_PORT_STAT_C_CONNECTION << 16);
+
+                /* high vs full speed is just a guess until after reset */
+                if (devctl & MUSB_DEVCTL_LSDEV)
+                        musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+
+                if (hcd->status_urb)
+                        usb_hcd_poll_rh_status(hcd);
+                else
+                        usb_hcd_resume_root_hub(hcd);
+
+                MUSB_HST_MODE(musb);
+
+                /* indicate new connection to OTG machine */
+                switch (musb->xceiv.state) {
+                case OTG_STATE_B_PERIPHERAL:
+                        if (int_usb & MUSB_INTR_SUSPEND) {
+                                DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
+                                musb->xceiv.state = OTG_STATE_B_HOST;
+                                hcd->self.is_b_host = 1;
+                                int_usb &= ~MUSB_INTR_SUSPEND;
+                        } else
+                                DBG(1, "CONNECT as b_peripheral???\n");
+                        break;
+                case OTG_STATE_B_WAIT_ACON:
+                        DBG(1, "HNP: Waiting to switch to b_host state\n");
+                        musb->xceiv.state = OTG_STATE_B_HOST;
+                        hcd->self.is_b_host = 1;
+                        break;
+                default:
+                        if ((devctl & MUSB_DEVCTL_VBUS)
+                                        == (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
+                                musb->xceiv.state = OTG_STATE_A_HOST;
+                                hcd->self.is_b_host = 0;
+                        }
+                        break;
+                }
+                DBG(1, "CONNECT (%s) devctl %02x\n",
+                                otg_state_string(musb), devctl);
+        }
+#endif  /* CONFIG_USB_MUSB_HDRC_HCD */
+
+        /* mentor saves a bit: bus reset and babble share the same irq.
+         * only host sees babble; only peripheral sees bus reset.
+         */
+        if (int_usb & MUSB_INTR_RESET) {
+                if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
+                        /*
+                         * Looks like non-HS BABBLE can be ignored, but
+                         * HS BABBLE is an error condition. For HS the solution
+                         * is to avoid babble in the first place and fix what
+                         * caused BABBLE. When HS BABBLE happens we can only
+                         * stop the session.
+                         */
+                        if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
+                                DBG(1, "BABBLE devctl: %02x\n", devctl);
+                        else {
+                                ERR("Stopping host session -- babble\n");
+                                musb_writeb(mbase, MUSB_DEVCTL, 0);
+                        }
+                } else if (is_peripheral_capable()) {
+                        DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
+                        switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_OTG
+                        case OTG_STATE_A_SUSPEND:
+                                /* We need to ignore disconnect on suspend
+                                 * otherwise tusb 2.0 won't reconnect after a
+                                 * power cycle, which breaks otg compliance.
+                                 */
+                                musb->ignore_disconnect = 1;
+                                musb_g_reset(musb);
+                                /* FALLTHROUGH */
+                        case OTG_STATE_A_WAIT_BCON:     /* OPT TD.4.7-900ms */
+                                DBG(1, "HNP: Setting timer as %s\n",
+                                                otg_state_string(musb));
+                                musb_otg_timer.data = (unsigned long)musb;
+                                mod_timer(&musb_otg_timer, jiffies
+                                        + msecs_to_jiffies(100));
+                                break;
+                        case OTG_STATE_A_PERIPHERAL:
+                                musb_hnp_stop(musb);
+                                break;
+                        case OTG_STATE_B_WAIT_ACON:
+                                DBG(1, "HNP: RESET (%s), to b_peripheral\n",
+                                        otg_state_string(musb));
+                                musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+                                musb_g_reset(musb);
+                                break;
+#endif
+                        case OTG_STATE_B_IDLE:
+                                musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+                                /* FALLTHROUGH */
+                        case OTG_STATE_B_PERIPHERAL:
+                                musb_g_reset(musb);
+                                break;
+                        default:
+                                DBG(1, "Unhandled BUS RESET as %s\n",
+                                        otg_state_string(musb));
+                        }
+                }
+
+                handled = IRQ_HANDLED;
+        }
+        schedule_work(&musb->irq_work);
+
+        return handled;
+}
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+                                u8 devctl, u8 power)
+{
+        irqreturn_t handled = IRQ_NONE;
+
+#if 0
+/* REVISIT ... this would be for multiplexing periodic endpoints, or
+ * supporting transfer phasing to prevent exceeding ISO bandwidth
+ * limits of a given frame or microframe.
+ *
+ * It's not needed for peripheral side, which dedicates endpoints;
+ * though it _might_ use SOF irqs for other purposes.
+ *
+ * And it's not currently needed for host side, which also dedicates
+ * endpoints, relies on TX/RX interval registers, and isn't claimed
+ * to support ISO transfers yet.
+ */
+        if (int_usb & MUSB_INTR_SOF) {
+                void __iomem *mbase = musb->mregs;
+                struct musb_hw_ep       *ep;
+                u8 epnum;
+                u16 frame;
+
+                DBG(6, "START_OF_FRAME\n");
+                handled = IRQ_HANDLED;
+
+                /* start any periodic Tx transfers waiting for current frame */
+                frame = musb_readw(mbase, MUSB_FRAME);
+                ep = musb->endpoints;
+                for (epnum = 1; (epnum < musb->nr_endpoints)
+                                        && (musb->epmask >= (1 << epnum));
+                                epnum++, ep++) {
+                        /*
+                         * FIXME handle framecounter wraps (12 bits)
+                         * eliminate duplicated StartUrb logic
+                         */
+                        if (ep->dwWaitFrame >= frame) {
+                                ep->dwWaitFrame = 0;
+                                pr_debug("SOF --> periodic TX%s on %d\n",
+                                        ep->tx_channel ? " DMA" : "",
+                                        epnum);
+                                if (!ep->tx_channel)
+                                        musb_h_tx_start(musb, epnum);
+                                else
+                                        cppi_hostdma_start(musb, epnum);
+                        }
+                }               /* end of for loop */
+        }
+#endif
+
+        if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+                DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n",
+                                otg_state_string(musb),
+                                MUSB_MODE(musb), devctl);
+                handled = IRQ_HANDLED;
+
+                switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+                case OTG_STATE_A_HOST:
+                case OTG_STATE_A_SUSPEND:
+                        musb_root_disconnect(musb);
+                        if (musb->a_wait_bcon != 0)
+                                musb_platform_try_idle(musb, jiffies
+                                        + msecs_to_jiffies(musb->a_wait_bcon));
+                        break;
+#endif  /* HOST */
+#ifdef CONFIG_USB_MUSB_OTG
+                case OTG_STATE_B_HOST:
+                        musb_hnp_stop(musb);
+                        break;
+                case OTG_STATE_A_PERIPHERAL:
+                        musb_hnp_stop(musb);
+                        musb_root_disconnect(musb);
+                        /* FALLTHROUGH */
+                case OTG_STATE_B_WAIT_ACON:
+                        /* FALLTHROUGH */
+#endif  /* OTG */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+                case OTG_STATE_B_PERIPHERAL:
+                case OTG_STATE_B_IDLE:
+                        musb_g_disconnect(musb);
+                        break;
+#endif  /* GADGET */
+                default:
+                        WARNING("unhandled DISCONNECT transition (%s)\n",
+                                otg_state_string(musb));
+                        break;
+                }
+
+                schedule_work(&musb->irq_work);
+        }
+
+        if (int_usb & MUSB_INTR_SUSPEND) {
+                DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
+                                otg_state_string(musb), devctl, power);
+                handled = IRQ_HANDLED;
+
+                switch (musb->xceiv.state) {
+#ifdef  CONFIG_USB_MUSB_OTG
+                case OTG_STATE_A_PERIPHERAL:
+                        /*
+                         * We cannot stop HNP here, devctl BDEVICE might be
+                         * still set.
+                         */
+                        break;
+#endif
+                case OTG_STATE_B_PERIPHERAL:
+                        musb_g_suspend(musb);
+                        musb->is_active = is_otg_enabled(musb)
+                                        && musb->xceiv.gadget->b_hnp_enable;
+                        if (musb->is_active) {
+#ifdef  CONFIG_USB_MUSB_OTG
+                                musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+                                DBG(1, "HNP: Setting timer for b_ase0_brst\n");
+                                musb_otg_timer.data = (unsigned long)musb;
+                                mod_timer(&musb_otg_timer, jiffies
+                                        + msecs_to_jiffies(TB_ASE0_BRST));
+#endif
+                        }
+                        break;
+                case OTG_STATE_A_WAIT_BCON:
+                        if (musb->a_wait_bcon != 0)
+                                musb_platform_try_idle(musb, jiffies
+                                        + msecs_to_jiffies(musb->a_wait_bcon));
+                        break;
+                case OTG_STATE_A_HOST:
+                        musb->xceiv.state = OTG_STATE_A_SUSPEND;
+                        musb->is_active = is_otg_enabled(musb)
+                                        && musb->xceiv.host->b_hnp_enable;
+                        break;
+                case OTG_STATE_B_HOST:
+                        /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
+                        DBG(1, "REVISIT: SUSPEND as B_HOST\n");
+                        break;
+                default:
+                        /* "should not happen" */
+                        musb->is_active = 0;
+                        break;
+                }
+                schedule_work(&musb->irq_work);
+        }
+
+
+        return handled;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+* Program the HDRC to start (enable interrupts, dma, etc.).
+*/
+void musb_start(struct musb *musb)
+{
+        void __iomem    *regs = musb->mregs;
+        u8              devctl = musb_readb(regs, MUSB_DEVCTL);
+
+        DBG(2, "<== devctl %02x\n", devctl);
+
+        /*  Set INT enable registers, enable interrupts */
+        musb_writew(regs, MUSB_INTRTXE, musb->epmask);
+        musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+        musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+        musb_writeb(regs, MUSB_TESTMODE, 0);
+
+        /* put into basic highspeed mode and start session */
+        musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+                                                | MUSB_POWER_SOFTCONN
+                                                | MUSB_POWER_HSENAB
+                                                /* ENSUSPEND wedges tusb */
+                                                /* | MUSB_POWER_ENSUSPEND */
+                                                );
+
+        musb->is_active = 0;
+        devctl = musb_readb(regs, MUSB_DEVCTL);
+        devctl &= ~MUSB_DEVCTL_SESSION;
+
+        if (is_otg_enabled(musb)) {
+                /* session started after:
+                 * (a) ID-grounded irq, host mode;
+                 * (b) vbus present/connect IRQ, peripheral mode;
+                 * (c) peripheral initiates, using SRP
+                 */
+                if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+                        musb->is_active = 1;
+                else
+                        devctl |= MUSB_DEVCTL_SESSION;
+
+        } else if (is_host_enabled(musb)) {
+                /* assume ID pin is hard-wired to ground */
+                devctl |= MUSB_DEVCTL_SESSION;
+
+        } else /* peripheral is enabled */ {
+                if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+                        musb->is_active = 1;
+        }
+        musb_platform_enable(musb);
+        musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+
+static void musb_generic_disable(struct musb *musb)
+{
+        void __iomem    *mbase = musb->mregs;
+        u16     temp;
+
+        /* disable interrupts */
+        musb_writeb(mbase, MUSB_INTRUSBE, 0);
+        musb_writew(mbase, MUSB_INTRTXE, 0);
+        musb_writew(mbase, MUSB_INTRRXE, 0);
+
+        /* off */
+        musb_writeb(mbase, MUSB_DEVCTL, 0);
+
+        /*  flush pending interrupts */
+        temp = musb_readb(mbase, MUSB_INTRUSB);
+        temp = musb_readw(mbase, MUSB_INTRTX);
+        temp = musb_readw(mbase, MUSB_INTRRX);
+
+}
+
+/*
+ * Make the HDRC stop (disable interrupts, etc.);
+ * reversible by musb_start
+ * called on gadget driver unregister
+ * with controller locked, irqs blocked
+ * acts as a NOP unless some role activated the hardware
+ */
+void musb_stop(struct musb *musb)
+{
+        /* stop IRQs, timers, ... */
+        musb_platform_disable(musb);
+        musb_generic_disable(musb);
+        DBG(3, "HDRC disabled\n");
+
+        /* FIXME
+         *  - mark host and/or peripheral drivers unusable/inactive
+         *  - disable DMA (and enable it in HdrcStart)
+         *  - make sure we can musb_start() after musb_stop(); with
+         *    OTG mode, gadget driver module rmmod/modprobe cycles that
+         *  - ...
+         */
+        musb_platform_try_idle(musb, 0);
+}
+
+static void musb_shutdown(struct platform_device *pdev)
+{
+        struct musb     *musb = dev_to_musb(&pdev->dev);
+        unsigned long   flags;
+
+        spin_lock_irqsave(&musb->lock, flags);
+        musb_platform_disable(musb);
+        musb_generic_disable(musb);
+        if (musb->clock) {
+                clk_put(musb->clock);
+                musb->clock = NULL;
+        }
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        /* FIXME power down */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The silicon either has hard-wired endpoint configurations, or else
+ * "dynamic fifo" sizing.  The driver has support for both, though at this
+ * writing only the dynamic sizing is very well tested.   We use normal
+ * idioms to so both modes are compile-tested, but dead code elimination
+ * leaves only the relevant one in the object file.
+ *
+ * We don't currently use dynamic fifo setup capability to do anything
+ * more than selecting one of a bunch of predefined configurations.
+ */
+#if defined(CONFIG_USB_TUSB6010) || \
+        defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+static ushort __initdata fifo_mode = 4;
+#else
+static ushort __initdata fifo_mode = 2;
+#endif
+
+/* "modprobe ... fifo_mode=1" etc */
+module_param(fifo_mode, ushort, 0);
+MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
+
+
+enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
+enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
+
+struct fifo_cfg {
+        u8              hw_ep_num;
+        enum fifo_style style;
+        enum buf_mode   mode;
+        u16             maxpacket;
+};
+
+/*
+ * tables defining fifo_mode values.  define more if you like.
+ * for host side, make sure both halves of ep1 are set up.
+ */
+
+/* mode 0 - fits in 2KB */
+static struct fifo_cfg __initdata mode_0_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 1 - fits in 4KB */
+static struct fifo_cfg __initdata mode_1_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 2 - fits in 4KB */
+static struct fifo_cfg __initdata mode_2_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 3 - fits in 4KB */
+static struct fifo_cfg __initdata mode_3_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 4 - fits in 16KB */
+static struct fifo_cfg __initdata mode_4_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+
+/*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+ *
+ * returns negative errno or offset for next fifo.
+ */
+static int __init
+fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
+                const struct fifo_cfg *cfg, u16 offset)
+{
+        void __iomem    *mbase = musb->mregs;
+        int     size = 0;
+        u16     maxpacket = cfg->maxpacket;
+        u16     c_off = offset >> 3;
+        u8      c_size;
+
+        /* expect hw_ep has already been zero-initialized */
+
+        size = ffs(max(maxpacket, (u16) 8)) - 1;
+        maxpacket = 1 << size;
+
+        c_size = size - 3;
+        if (cfg->mode == BUF_DOUBLE) {
+                if ((offset + (maxpacket << 1)) >
+                                (1 << (musb->config->ram_bits + 2)))
+                        return -EMSGSIZE;
+                c_size |= MUSB_FIFOSZ_DPB;
+        } else {
+                if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
+                        return -EMSGSIZE;
+        }
+
+        /* configure the FIFO */
+        musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        /* EP0 reserved endpoint for control, bidirectional;
+         * EP1 reserved for bulk, two unidirection halves.
+         */
+        if (hw_ep->epnum == 1)
+                musb->bulk_ep = hw_ep;
+        /* REVISIT error check:  be sure ep0 can both rx and tx ... */
+#endif
+        switch (cfg->style) {
+        case FIFO_TX:
+                musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+                musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+                hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+                hw_ep->max_packet_sz_tx = maxpacket;
+                break;
+        case FIFO_RX:
+                musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+                musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+                hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+                hw_ep->max_packet_sz_rx = maxpacket;
+                break;
+        case FIFO_RXTX:
+                musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+                musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+                hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+                hw_ep->max_packet_sz_rx = maxpacket;
+
+                musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+                musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+                hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
+                hw_ep->max_packet_sz_tx = maxpacket;
+
+                hw_ep->is_shared_fifo = true;
+                break;
+        }
+
+        /* NOTE rx and tx endpoint irqs aren't managed separately,
+         * which happens to be ok
+         */
+        musb->epmask |= (1 << hw_ep->epnum);
+
+        return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
+}
+
+static struct fifo_cfg __initdata ep0_cfg = {
+        .style = FIFO_RXTX, .maxpacket = 64,
+};
+
+static int __init ep_config_from_table(struct musb *musb)
+{
+        const struct fifo_cfg   *cfg;
+        unsigned                i, n;
+        int                     offset;
+        struct musb_hw_ep       *hw_ep = musb->endpoints;
+
+        switch (fifo_mode) {
+        default:
+                fifo_mode = 0;
+                /* FALLTHROUGH */
+        case 0:
+                cfg = mode_0_cfg;
+                n = ARRAY_SIZE(mode_0_cfg);
+                break;
+        case 1:
+                cfg = mode_1_cfg;
+                n = ARRAY_SIZE(mode_1_cfg);
+                break;
+        case 2:
+                cfg = mode_2_cfg;
+                n = ARRAY_SIZE(mode_2_cfg);
+                break;
+        case 3:
+                cfg = mode_3_cfg;
+                n = ARRAY_SIZE(mode_3_cfg);
+                break;
+        case 4:
+                cfg = mode_4_cfg;
+                n = ARRAY_SIZE(mode_4_cfg);
+                break;
+        }
+
+        printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
+                        musb_driver_name, fifo_mode);
+
+
+        offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
+        /* assert(offset > 0) */
+
+        /* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
+         * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
+         */
+
+        for (i = 0; i < n; i++) {
+                u8      epn = cfg->hw_ep_num;
+
+                if (epn >= musb->config->num_eps) {
+                        pr_debug("%s: invalid ep %d\n",
+                                        musb_driver_name, epn);
+                        continue;
+                }
+                offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
+                if (offset < 0) {
+                        pr_debug("%s: mem overrun, ep %d\n",
+                                        musb_driver_name, epn);
+                        return -EINVAL;
+                }
+                epn++;
+                musb->nr_endpoints = max(epn, musb->nr_endpoints);
+        }
+
+        printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
+                        musb_driver_name,
+                        n + 1, musb->config->num_eps * 2 - 1,
+                        offset, (1 << (musb->config->ram_bits + 2)));
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        if (!musb->bulk_ep) {
+                pr_debug("%s: missing bulk\n", musb_driver_name);
+                return -EINVAL;
+        }
+#endif
+
+        return 0;
+}
+
+
+/*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+ * @param musb the controller
+ */
+static int __init ep_config_from_hw(struct musb *musb)
+{
+        u8 epnum = 0, reg;
+        struct musb_hw_ep *hw_ep;
+        void *mbase = musb->mregs;
+
+        DBG(2, "<== static silicon ep config\n");
+
+        /* FIXME pick up ep0 maxpacket size */
+
+        for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
+                musb_ep_select(mbase, epnum);
+                hw_ep = musb->endpoints + epnum;
+
+                /* read from core using indexed model */
+                reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
+                if (!reg) {
+                        /* 0's returned when no more endpoints */
+                        break;
+                }
+                musb->nr_endpoints++;
+                musb->epmask |= (1 << epnum);
+
+                hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
+
+                /* shared TX/RX FIFO? */
+                if ((reg & 0xf0) == 0xf0) {
+                        hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
+                        hw_ep->is_shared_fifo = true;
+                        continue;
+                } else {
+                        hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
+                        hw_ep->is_shared_fifo = false;
+                }
+
+                /* FIXME set up hw_ep->{rx,tx}_double_buffered */
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+                /* pick an RX/TX endpoint for bulk */
+                if (hw_ep->max_packet_sz_tx < 512
+                                || hw_ep->max_packet_sz_rx < 512)
+                        continue;
+
+                /* REVISIT:  this algorithm is lazy, we should at least
+                 * try to pick a double buffered endpoint.
+                 */
+                if (musb->bulk_ep)
+                        continue;
+                musb->bulk_ep = hw_ep;
+#endif
+        }
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        if (!musb->bulk_ep) {
+                pr_debug("%s: missing bulk\n", musb_driver_name);
+                return -EINVAL;
+        }
+#endif
+
+        return 0;
+}
+
+enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
+
+/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
+ * configure endpoints, or take their config from silicon
+ */
+static int __init musb_core_init(u16 musb_type, struct musb *musb)
+{
+#ifdef MUSB_AHB_ID
+        u32 data;
+#endif
+        u8 reg;
+        char *type;
+        u16 hwvers, rev_major, rev_minor;
+        char aInfo[78], aRevision[32], aDate[12];
+        void __iomem    *mbase = musb->mregs;
+        int             status = 0;
+        int             i;
+
+        /* log core options (read using indexed model) */
+        musb_ep_select(mbase, 0);
+        reg = musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+
+        strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
+        if (reg & MUSB_CONFIGDATA_DYNFIFO)
+                strcat(aInfo, ", dyn FIFOs");
+        if (reg & MUSB_CONFIGDATA_MPRXE) {
+                strcat(aInfo, ", bulk combine");
+#ifdef C_MP_RX
+                musb->bulk_combine = true;
+#else
+                strcat(aInfo, " (X)");          /* no driver support */
+#endif
+        }
+        if (reg & MUSB_CONFIGDATA_MPTXE) {
+                strcat(aInfo, ", bulk split");
+#ifdef C_MP_TX
+                musb->bulk_split = true;
+#else
+                strcat(aInfo, " (X)");          /* no driver support */
+#endif
+        }
+        if (reg & MUSB_CONFIGDATA_HBRXE) {
+                strcat(aInfo, ", HB-ISO Rx");
+                strcat(aInfo, " (X)");          /* no driver support */
+        }
+        if (reg & MUSB_CONFIGDATA_HBTXE) {
+                strcat(aInfo, ", HB-ISO Tx");
+                strcat(aInfo, " (X)");          /* no driver support */
+        }
+        if (reg & MUSB_CONFIGDATA_SOFTCONE)
+                strcat(aInfo, ", SoftConn");
+
+        printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
+                        musb_driver_name, reg, aInfo);
+
+#ifdef MUSB_AHB_ID
+        data = musb_readl(mbase, 0x404);
+        sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff),
+                (data >> 16) & 0xff, (data >> 24) & 0xff);
+        /* FIXME ID2 and ID3 are unused */
+        data = musb_readl(mbase, 0x408);
+        printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data);
+        data = musb_readl(mbase, 0x40c);
+        printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data);
+        reg = musb_readb(mbase, 0x400);
+        musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC;
+#else
+        aDate[0] = 0;
+#endif
+        if (MUSB_CONTROLLER_MHDRC == musb_type) {
+                musb->is_multipoint = 1;
+                type = "M";
+        } else {
+                musb->is_multipoint = 0;
+                type = "";
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#ifndef CONFIG_USB_OTG_BLACKLIST_HUB
+                printk(KERN_ERR
+                        "%s: kernel must blacklist external hubs\n",
+                        musb_driver_name);
+#endif
+#endif
+        }
+
+        /* log release info */
+        hwvers = musb_readw(mbase, MUSB_HWVERS);
+        rev_major = (hwvers >> 10) & 0x1f;
+        rev_minor = hwvers & 0x3ff;
+        snprintf(aRevision, 32, "%d.%d%s", rev_major,
+                rev_minor, (hwvers & 0x8000) ? "RC" : "");
+        printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
+                        musb_driver_name, type, aRevision, aDate);
+
+        /* configure ep0 */
+        musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+        musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+
+        /* discover endpoint configuration */
+        musb->nr_endpoints = 1;
+        musb->epmask = 1;
+
+        if (reg & MUSB_CONFIGDATA_DYNFIFO) {
+                if (musb->config->dyn_fifo)
+                        status = ep_config_from_table(musb);
+                else {
+                        ERR("reconfigure software for Dynamic FIFOs\n");
+                        status = -ENODEV;
+                }
+        } else {
+                if (!musb->config->dyn_fifo)
+                        status = ep_config_from_hw(musb);
+                else {
+                        ERR("reconfigure software for static FIFOs\n");
+                        return -ENODEV;
+                }
+        }
+
+        if (status < 0)
+                return status;
+
+        /* finish init, and print endpoint config */
+        for (i = 0; i < musb->nr_endpoints; i++) {
+                struct musb_hw_ep       *hw_ep = musb->endpoints + i;
+
+                hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
+#ifdef CONFIG_USB_TUSB6010
+                hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
+                hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
+                hw_ep->fifo_sync_va =
+                        musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i);
+
+                if (i == 0)
+                        hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
+                else
+                        hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2);
+#endif
+
+                hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+                hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase;
+                hw_ep->rx_reinit = 1;
+                hw_ep->tx_reinit = 1;
+#endif
+
+                if (hw_ep->max_packet_sz_tx) {
+                        printk(KERN_DEBUG
+                                "%s: hw_ep %d%s, %smax %d\n",
+                                musb_driver_name, i,
+                                hw_ep->is_shared_fifo ? "shared" : "tx",
+                                hw_ep->tx_double_buffered
+                                        ? "doublebuffer, " : "",
+                                hw_ep->max_packet_sz_tx);
+                }
+                if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
+                        printk(KERN_DEBUG
+                                "%s: hw_ep %d%s, %smax %d\n",
+                                musb_driver_name, i,
+                                "rx",
+                                hw_ep->rx_double_buffered
+                                        ? "doublebuffer, " : "",
+                                hw_ep->max_packet_sz_rx);
+                }
+                if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
+                        DBG(1, "hw_ep %d not configured\n", i);
+        }
+
+        return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+
+static irqreturn_t generic_interrupt(int irq, void *__hci)
+{
+        unsigned long   flags;
+        irqreturn_t     retval = IRQ_NONE;
+        struct musb     *musb = __hci;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+        musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+        musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+        if (musb->int_usb || musb->int_tx || musb->int_rx)
+                retval = musb_interrupt(musb);
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        /* REVISIT we sometimes get spurious IRQs on g_ep0
+         * not clear why...
+         */
+        if (retval != IRQ_HANDLED)
+                DBG(5, "spurious?\n");
+
+        return IRQ_HANDLED;
+}
+
+#else
+#define generic_interrupt       NULL
+#endif
+
+/*
+ * handle all the irqs defined by the HDRC core. for now we expect:  other
+ * irq sources (phy, dma, etc) will be handled first, musb->int_* values
+ * will be assigned, and the irq will already have been acked.
+ *
+ * called in irq context with spinlock held, irqs blocked
+ */
+irqreturn_t musb_interrupt(struct musb *musb)
+{
+        irqreturn_t     retval = IRQ_NONE;
+        u8              devctl, power;
+        int             ep_num;
+        u32             reg;
+
+        devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+        power = musb_readb(musb->mregs, MUSB_POWER);
+
+        DBG(4, "** IRQ %s usb%04x tx%04x rx%04x\n",
+                (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
+                musb->int_usb, musb->int_tx, musb->int_rx);
+
+        /* the core can interrupt us for multiple reasons; docs have
+         * a generic interrupt flowchart to follow
+         */
+        if (musb->int_usb & STAGE0_MASK)
+                retval |= musb_stage0_irq(musb, musb->int_usb,
+                                devctl, power);
+
+        /* "stage 1" is handling endpoint irqs */
+
+        /* handle endpoint 0 first */
+        if (musb->int_tx & 1) {
+                if (devctl & MUSB_DEVCTL_HM)
+                        retval |= musb_h_ep0_irq(musb);
+                else
+                        retval |= musb_g_ep0_irq(musb);
+        }
+
+        /* RX on endpoints 1-15 */
+        reg = musb->int_rx >> 1;
+        ep_num = 1;
+        while (reg) {
+                if (reg & 1) {
+                        /* musb_ep_select(musb->mregs, ep_num); */
+                        /* REVISIT just retval = ep->rx_irq(...) */
+                        retval = IRQ_HANDLED;
+                        if (devctl & MUSB_DEVCTL_HM) {
+                                if (is_host_capable())
+                                        musb_host_rx(musb, ep_num);
+                        } else {
+                                if (is_peripheral_capable())
+                                        musb_g_rx(musb, ep_num);
+                        }
+                }
+
+                reg >>= 1;
+                ep_num++;
+        }
+
+        /* TX on endpoints 1-15 */
+        reg = musb->int_tx >> 1;
+        ep_num = 1;
+        while (reg) {
+                if (reg & 1) {
+                        /* musb_ep_select(musb->mregs, ep_num); */
+                        /* REVISIT just retval |= ep->tx_irq(...) */
+                        retval = IRQ_HANDLED;
+                        if (devctl & MUSB_DEVCTL_HM) {
+                                if (is_host_capable())
+                                        musb_host_tx(musb, ep_num);
+                        } else {
+                                if (is_peripheral_capable())
+                                        musb_g_tx(musb, ep_num);
+                        }
+                }
+                reg >>= 1;
+                ep_num++;
+        }
+
+        /* finish handling "global" interrupts after handling fifos */
+        if (musb->int_usb)
+                retval |= musb_stage2_irq(musb,
+                                musb->int_usb, devctl, power);
+
+        return retval;
+}
+
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static int __initdata use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+
+void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
+{
+        u8      devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+        /* called with controller lock already held */
+
+        if (!epnum) {
+#ifndef CONFIG_USB_TUSB_OMAP_DMA
+                if (!is_cppi_enabled()) {
+                        /* endpoint 0 */
+                        if (devctl & MUSB_DEVCTL_HM)
+                                musb_h_ep0_irq(musb);
+                        else
+                                musb_g_ep0_irq(musb);
+                }
+#endif
+        } else {
+                /* endpoints 1..15 */
+                if (transmit) {
+                        if (devctl & MUSB_DEVCTL_HM) {
+                                if (is_host_capable())
+                                        musb_host_tx(musb, epnum);
+                        } else {
+                                if (is_peripheral_capable())
+                                        musb_g_tx(musb, epnum);
+                        }
+                } else {
+                        /* receive */
+                        if (devctl & MUSB_DEVCTL_HM) {
+                                if (is_host_capable())
+                                        musb_host_rx(musb, epnum);
+                        } else {
+                                if (is_peripheral_capable())
+                                        musb_g_rx(musb, epnum);
+                        }
+                }
+        }
+}
+
+#else
+#define use_dma                 0
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_SYSFS
+
+static ssize_t
+musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+        struct musb *musb = dev_to_musb(dev);
+        unsigned long flags;
+        int ret = -EINVAL;
+
+        spin_lock_irqsave(&musb->lock, flags);
+        ret = sprintf(buf, "%s\n", otg_state_string(musb));
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        return ret;
+}
+
+static ssize_t
+musb_mode_store(struct device *dev, struct device_attribute *attr,
+                const char *buf, size_t n)
+{
+        struct musb     *musb = dev_to_musb(dev);
+        unsigned long   flags;
+
+        spin_lock_irqsave(&musb->lock, flags);
+        if (!strncmp(buf, "host", 4))
+                musb_platform_set_mode(musb, MUSB_HOST);
+        if (!strncmp(buf, "peripheral", 10))
+                musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+        if (!strncmp(buf, "otg", 3))
+                musb_platform_set_mode(musb, MUSB_OTG);
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        return n;
+}
+static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
+
+static ssize_t
+musb_vbus_store(struct device *dev, struct device_attribute *attr,
+                const char *buf, size_t n)
+{
+        struct musb     *musb = dev_to_musb(dev);
+        unsigned long   flags;
+        unsigned long   val;
+
+        if (sscanf(buf, "%lu", &val) < 1) {
+                printk(KERN_ERR "Invalid VBUS timeout ms value\n");
+                return -EINVAL;
+        }
+
+        spin_lock_irqsave(&musb->lock, flags);
+        musb->a_wait_bcon = val;
+        if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+                musb->is_active = 0;
+        musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        return n;
+}
+
+static ssize_t
+musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+        struct musb     *musb = dev_to_musb(dev);
+        unsigned long   flags;
+        unsigned long   val;
+        int             vbus;
+
+        spin_lock_irqsave(&musb->lock, flags);
+        val = musb->a_wait_bcon;
+        vbus = musb_platform_get_vbus_status(musb);
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        return sprintf(buf, "Vbus %s, timeout %lu\n",
+                        vbus ? "on" : "off", val);
+}
+static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* Gadget drivers can't know that a host is connected so they might want
+ * to start SRP, but users can.  This allows userspace to trigger SRP.
+ */
+static ssize_t
+musb_srp_store(struct device *dev, struct device_attribute *attr,
+                const char *buf, size_t n)
+{
+        struct musb     *musb = dev_to_musb(dev);
+        unsigned short  srp;
+
+        if (sscanf(buf, "%hu", &srp) != 1
+                        || (srp != 1)) {
+                printk(KERN_ERR "SRP: Value must be 1\n");
+                return -EINVAL;
+        }
+
+        if (srp == 1)
+                musb_g_wakeup(musb);
+
+        return n;
+}
+static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
+
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+
+#endif  /* sysfs */
+
+/* Only used to provide driver mode change events */
+static void musb_irq_work(struct work_struct *data)
+{
+        struct musb *musb = container_of(data, struct musb, irq_work);
+        static int old_state;
+
+        if (musb->xceiv.state != old_state) {
+                old_state = musb->xceiv.state;
+                sysfs_notify(&musb->controller->kobj, NULL, "mode");
+        }
+}
+
+/* --------------------------------------------------------------------------
+ * Init support
+ */
+
+static struct musb *__init
+allocate_instance(struct device *dev,
+                struct musb_hdrc_config *config, void __iomem *mbase)
+{
+        struct musb             *musb;
+        struct musb_hw_ep       *ep;
+        int                     epnum;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        struct usb_hcd  *hcd;
+
+        hcd = usb_create_hcd(&musb_hc_driver, dev, dev->bus_id);
+        if (!hcd)
+                return NULL;
+        /* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
+
+        musb = hcd_to_musb(hcd);
+        INIT_LIST_HEAD(&musb->control);
+        INIT_LIST_HEAD(&musb->in_bulk);
+        INIT_LIST_HEAD(&musb->out_bulk);
+
+        hcd->uses_new_polling = 1;
+
+        musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+#else
+        musb = kzalloc(sizeof *musb, GFP_KERNEL);
+        if (!musb)
+                return NULL;
+        dev_set_drvdata(dev, musb);
+
+#endif
+
+        musb->mregs = mbase;
+        musb->ctrl_base = mbase;
+        musb->nIrq = -ENODEV;
+        musb->config = config;
+        for (epnum = 0, ep = musb->endpoints;
+                        epnum < musb->config->num_eps;
+                        epnum++, ep++) {
+
+                ep->musb = musb;
+                ep->epnum = epnum;
+        }
+
+        musb->controller = dev;
+        return musb;
+}
+
+static void musb_free(struct musb *musb)
+{
+        /* this has multiple entry modes. it handles fault cleanup after
+         * probe(), where things may be partially set up, as well as rmmod
+         * cleanup after everything's been de-activated.
+         */
+
+#ifdef CONFIG_SYSFS
+        device_remove_file(musb->controller, &dev_attr_mode);
+        device_remove_file(musb->controller, &dev_attr_vbus);
+#ifdef CONFIG_USB_MUSB_OTG
+        device_remove_file(musb->controller, &dev_attr_srp);
+#endif
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+        musb_gadget_cleanup(musb);
+#endif
+
+        if (musb->nIrq >= 0) {
+                disable_irq_wake(musb->nIrq);
+                free_irq(musb->nIrq, musb);
+        }
+        if (is_dma_capable() && musb->dma_controller) {
+                struct dma_controller   *c = musb->dma_controller;
+
+                (void) c->stop(c);
+                dma_controller_destroy(c);
+        }
+
+        musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+        musb_platform_exit(musb);
+        musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
+        if (musb->clock) {
+                clk_disable(musb->clock);
+                clk_put(musb->clock);
+        }
+
+#ifdef CONFIG_USB_MUSB_OTG
+        put_device(musb->xceiv.dev);
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        usb_put_hcd(musb_to_hcd(musb));
+#else
+        kfree(musb);
+#endif
+}
+
+/*
+ * Perform generic per-controller initialization.
+ *
+ * @pDevice: the controller (already clocked, etc)
+ * @nIrq: irq
+ * @mregs: virtual address of controller registers,
+ *      not yet corrected for platform-specific offsets
+ */
+static int __init
+musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
+{
+        int                     status;
+        struct musb             *musb;
+        struct musb_hdrc_platform_data *plat = dev->platform_data;
+
+        /* The driver might handle more features than the board; OK.
+         * Fail when the board needs a feature that's not enabled.
+         */
+        if (!plat) {
+                dev_dbg(dev, "no platform_data?\n");
+                return -ENODEV;
+        }
+        switch (plat->mode) {
+        case MUSB_HOST:
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+                break;
+#else
+                goto bad_config;
+#endif
+        case MUSB_PERIPHERAL:
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+                break;
+#else
+                goto bad_config;
+#endif
+        case MUSB_OTG:
+#ifdef CONFIG_USB_MUSB_OTG
+                break;
+#else
+bad_config:
+#endif
+        default:
+                dev_err(dev, "incompatible Kconfig role setting\n");
+                return -EINVAL;
+        }
+
+        /* allocate */
+        musb = allocate_instance(dev, plat->config, ctrl);
+        if (!musb)
+                return -ENOMEM;
+
+        spin_lock_init(&musb->lock);
+        musb->board_mode = plat->mode;
+        musb->board_set_power = plat->set_power;
+        musb->set_clock = plat->set_clock;
+        musb->min_power = plat->min_power;
+
+        /* Clock usage is chip-specific ... functional clock (DaVinci,
+         * OMAP2430), or PHY ref (some TUSB6010 boards).  All this core
+         * code does is make sure a clock handle is available; platform
+         * code manages it during start/stop and suspend/resume.
+         */
+        if (plat->clock) {
+                musb->clock = clk_get(dev, plat->clock);
+                if (IS_ERR(musb->clock)) {
+                        status = PTR_ERR(musb->clock);
+                        musb->clock = NULL;
+                        goto fail;
+                }
+        }
+
+        /* assume vbus is off */
+
+        /* platform adjusts musb->mregs and musb->isr if needed,
+         * and activates clocks
+         */
+        musb->isr = generic_interrupt;
+        status = musb_platform_init(musb);
+
+        if (status < 0)
+                goto fail;
+        if (!musb->isr) {
+                status = -ENODEV;
+                goto fail2;
+        }
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+        if (use_dma && dev->dma_mask) {
+                struct dma_controller   *c;
+
+                c = dma_controller_create(musb, musb->mregs);
+                musb->dma_controller = c;
+                if (c)
+                        (void) c->start(c);
+        }
+#endif
+        /* ideally this would be abstracted in platform setup */
+        if (!is_dma_capable() || !musb->dma_controller)
+                dev->dma_mask = NULL;
+
+        /* be sure interrupts are disabled before connecting ISR */
+        musb_platform_disable(musb);
+        musb_generic_disable(musb);
+
+        /* setup musb parts of the core (especially endpoints) */
+        status = musb_core_init(plat->config->multipoint
+                        ? MUSB_CONTROLLER_MHDRC
+                        : MUSB_CONTROLLER_HDRC, musb);
+        if (status < 0)
+                goto fail2;
+
+        /* Init IRQ workqueue before request_irq */
+        INIT_WORK(&musb->irq_work, musb_irq_work);
+
+        /* attach to the IRQ */
+        if (request_irq(nIrq, musb->isr, 0, dev->bus_id, musb)) {
+                dev_err(dev, "request_irq %d failed!\n", nIrq);
+                status = -ENODEV;
+                goto fail2;
+        }
+        musb->nIrq = nIrq;
+/* FIXME this handles wakeup irqs wrong */
+        if (enable_irq_wake(nIrq) == 0)
+                device_init_wakeup(dev, 1);
+
+        pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n",
+                        musb_driver_name,
+                        ({char *s;
+                        switch (musb->board_mode) {
+                        case MUSB_HOST:         s = "Host"; break;
+                        case MUSB_PERIPHERAL:   s = "Peripheral"; break;
+                        default:                s = "OTG"; break;
+                        }; s; }),
+                        ctrl,
+                        (is_dma_capable() && musb->dma_controller)
+                                ? "DMA" : "PIO",
+                        musb->nIrq);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        /* host side needs more setup, except for no-host modes */
+        if (musb->board_mode != MUSB_PERIPHERAL) {
+                struct usb_hcd  *hcd = musb_to_hcd(musb);
+
+                if (musb->board_mode == MUSB_OTG)
+                        hcd->self.otg_port = 1;
+                musb->xceiv.host = &hcd->self;
+                hcd->power_budget = 2 * (plat->power ? : 250);
+        }
+#endif                          /* CONFIG_USB_MUSB_HDRC_HCD */
+
+        /* For the host-only role, we can activate right away.
+         * (We expect the ID pin to be forcibly grounded!!)
+         * Otherwise, wait till the gadget driver hooks up.
+         */
+        if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+                MUSB_HST_MODE(musb);
+                musb->xceiv.default_a = 1;
+                musb->xceiv.state = OTG_STATE_A_IDLE;
+
+                status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+
+                DBG(1, "%s mode, status %d, devctl %02x %c\n",
+                        "HOST", status,
+                        musb_readb(musb->mregs, MUSB_DEVCTL),
+                        (musb_readb(musb->mregs, MUSB_DEVCTL)
+                                        & MUSB_DEVCTL_BDEVICE
+                                ? 'B' : 'A'));
+
+        } else /* peripheral is enabled */ {
+                MUSB_DEV_MODE(musb);
+                musb->xceiv.default_a = 0;
+                musb->xceiv.state = OTG_STATE_B_IDLE;
+
+                status = musb_gadget_setup(musb);
+
+                DBG(1, "%s mode, status %d, dev%02x\n",
+                        is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
+                        status,
+                        musb_readb(musb->mregs, MUSB_DEVCTL));
+
+        }
+
+        if (status == 0)
+                musb_debug_create("driver/musb_hdrc", musb);
+        else {
+fail:
+                if (musb->clock)
+                        clk_put(musb->clock);
+                device_init_wakeup(dev, 0);
+                musb_free(musb);
+                return status;
+        }
+
+#ifdef CONFIG_SYSFS
+        status = device_create_file(dev, &dev_attr_mode);
+        status = device_create_file(dev, &dev_attr_vbus);
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+        status = device_create_file(dev, &dev_attr_srp);
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+        status = 0;
+#endif
+
+        return status;
+
+fail2:
+        musb_platform_exit(musb);
+        goto fail;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
+ * bridge to a platform device; this driver then suffices.
+ */
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static u64      *orig_dma_mask;
+#endif
+
+static int __init musb_probe(struct platform_device *pdev)
+{
+        struct device   *dev = &pdev->dev;
+        int             irq = platform_get_irq(pdev, 0);
+        struct resource *iomem;
+        void __iomem    *base;
+
+        iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!iomem || irq == 0)
+                return -ENODEV;
+
+        base = ioremap(iomem->start, iomem->end - iomem->start + 1);
+        if (!base) {
+                dev_err(dev, "ioremap failed\n");
+                return -ENOMEM;
+        }
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+        /* clobbered by use_dma=n */
+        orig_dma_mask = dev->dma_mask;
+#endif
+        return musb_init_controller(dev, irq, base);
+}
+
+static int __devexit musb_remove(struct platform_device *pdev)
+{
+        struct musb     *musb = dev_to_musb(&pdev->dev);
+        void __iomem    *ctrl_base = musb->ctrl_base;
+
+        /* this gets called on rmmod.
+         *  - Host mode: host may still be active
+         *  - Peripheral mode: peripheral is deactivated (or never-activated)
+         *  - OTG mode: both roles are deactivated (or never-activated)
+         */
+        musb_shutdown(pdev);
+        musb_debug_delete("driver/musb_hdrc", musb);
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        if (musb->board_mode == MUSB_HOST)
+                usb_remove_hcd(musb_to_hcd(musb));
+#endif
+        musb_free(musb);
+        iounmap(ctrl_base);
+        device_init_wakeup(&pdev->dev, 0);
+#ifndef CONFIG_MUSB_PIO_ONLY
+        pdev->dev.dma_mask = orig_dma_mask;
+#endif
+        return 0;
+}
+
+#ifdef  CONFIG_PM
+
+static int musb_suspend(struct platform_device *pdev, pm_message_t message)
+{
+        unsigned long   flags;
+        struct musb     *musb = dev_to_musb(&pdev->dev);
+
+        if (!musb->clock)
+                return 0;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        if (is_peripheral_active(musb)) {
+                /* FIXME force disconnect unless we know USB will wake
+                 * the system up quickly enough to respond ...
+                 */
+        } else if (is_host_active(musb)) {
+                /* we know all the children are suspended; sometimes
+                 * they will even be wakeup-enabled.
+                 */
+        }
+
+        if (musb->set_clock)
+                musb->set_clock(musb->clock, 0);
+        else
+                clk_disable(musb->clock);
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return 0;
+}
+
+static int musb_resume(struct platform_device *pdev)
+{
+        unsigned long   flags;
+        struct musb     *musb = dev_to_musb(&pdev->dev);
+
+        if (!musb->clock)
+                return 0;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        if (musb->set_clock)
+                musb->set_clock(musb->clock, 1);
+        else
+                clk_enable(musb->clock);
+
+        /* for static cmos like DaVinci, register values were preserved
+         * unless for some reason the whole soc powered down and we're
+         * not treating that as a whole-system restart (e.g. swsusp)
+         */
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return 0;
+}
+
+#else
+#define musb_suspend    NULL
+#define musb_resume     NULL
+#endif
+
+static struct platform_driver musb_driver = {
+        .driver = {
+                .name           = (char *)musb_driver_name,
+                .bus            = &platform_bus_type,
+                .owner          = THIS_MODULE,
+        },
+        .remove         = __devexit_p(musb_remove),
+        .shutdown       = musb_shutdown,
+        .suspend        = musb_suspend,
+        .resume         = musb_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init musb_init(void)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        if (usb_disabled())
+                return 0;
+#endif
+
+        pr_info("%s: version " MUSB_VERSION ", "
+#ifdef CONFIG_MUSB_PIO_ONLY
+                "pio"
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+                "cppi-dma"
+#elif defined(CONFIG_USB_INVENTRA_DMA)
+                "musb-dma"
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+                "tusb-omap-dma"
+#else
+                "?dma?"
+#endif
+                ", "
+#ifdef CONFIG_USB_MUSB_OTG
+                "otg (peripheral+host)"
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+                "peripheral"
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+                "host"
+#endif
+                ", debug=%d\n",
+                musb_driver_name, debug);
+        return platform_driver_probe(&musb_driver, musb_probe);
+}
+
+/* make us init after usbcore and before usb
+ * gadget and host-side drivers start to register
+ */
+subsys_initcall(musb_init);
+
+static void __exit musb_cleanup(void)
+{
+        platform_driver_unregister(&musb_driver);
+}
+module_exit(musb_cleanup);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
new file mode 100644
index 000000000000..eade46d81708
--- /dev/null
+++ b/drivers/usb/musb/musb_core.h
@@ -0,0 +1,507 @@
+/*
+ * MUSB OTG driver defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_CORE_H__
+#define __MUSB_CORE_H__
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
+
+struct musb;
+struct musb_hw_ep;
+struct musb_ep;
+
+
+#include "musb_debug.h"
+#include "musb_dma.h"
+
+#include "musb_io.h"
+#include "musb_regs.h"
+
+#include "musb_gadget.h"
+#include "../core/hcd.h"
+#include "musb_host.h"
+
+
+
+#ifdef CONFIG_USB_MUSB_OTG
+
+#define is_peripheral_enabled(musb)     ((musb)->board_mode != MUSB_HOST)
+#define is_host_enabled(musb)           ((musb)->board_mode != MUSB_PERIPHERAL)
+#define is_otg_enabled(musb)            ((musb)->board_mode == MUSB_OTG)
+
+/* NOTE:  otg and peripheral-only state machines start at B_IDLE.
+ * OTG or host-only go to A_IDLE when ID is sensed.
+ */
+#define is_peripheral_active(m)         (!(m)->is_host)
+#define is_host_active(m)               ((m)->is_host)
+
+#else
+#define is_peripheral_enabled(musb)     is_peripheral_capable()
+#define is_host_enabled(musb)           is_host_capable()
+#define is_otg_enabled(musb)            0
+
+#define is_peripheral_active(musb)      is_peripheral_capable()
+#define is_host_active(musb)            is_host_capable()
+#endif
+
+#if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL)
+/* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
+ * override that choice selection (often USB_GADGET_DUMMY_HCD).
+ */
+#ifndef CONFIG_USB_GADGET_MUSB_HDRC
+#error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC
+#endif
+#endif  /* need MUSB gadget selection */
+
+
+#ifdef CONFIG_PROC_FS
+#include <linux/fs.h>
+#define MUSB_CONFIG_PROC_FS
+#endif
+
+/****************************** PERIPHERAL ROLE *****************************/
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+#define is_peripheral_capable() (1)
+
+extern irqreturn_t musb_g_ep0_irq(struct musb *);
+extern void musb_g_tx(struct musb *, u8);
+extern void musb_g_rx(struct musb *, u8);
+extern void musb_g_reset(struct musb *);
+extern void musb_g_suspend(struct musb *);
+extern void musb_g_resume(struct musb *);
+extern void musb_g_wakeup(struct musb *);
+extern void musb_g_disconnect(struct musb *);
+
+#else
+
+#define is_peripheral_capable() (0)
+
+static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_g_reset(struct musb *m) {}
+static inline void musb_g_suspend(struct musb *m) {}
+static inline void musb_g_resume(struct musb *m) {}
+static inline void musb_g_wakeup(struct musb *m) {}
+static inline void musb_g_disconnect(struct musb *m) {}
+
+#endif
+
+/****************************** HOST ROLE ***********************************/
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+
+#define is_host_capable()       (1)
+
+extern irqreturn_t musb_h_ep0_irq(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
+
+#else
+
+#define is_host_capable()       (0)
+
+static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_host_tx(struct musb *m, u8 e) {}
+static inline void musb_host_rx(struct musb *m, u8 e) {}
+
+#endif
+
+
+/****************************** CONSTANTS ********************************/
+
+#ifndef MUSB_C_NUM_EPS
+#define MUSB_C_NUM_EPS ((u8)16)
+#endif
+
+#ifndef MUSB_MAX_END0_PACKET
+#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
+#endif
+
+/* host side ep0 states */
+enum musb_h_ep0_state {
+        MUSB_EP0_IDLE,
+        MUSB_EP0_START,                 /* expect ack of setup */
+        MUSB_EP0_IN,                    /* expect IN DATA */
+        MUSB_EP0_OUT,                   /* expect ack of OUT DATA */
+        MUSB_EP0_STATUS,                /* expect ack of STATUS */
+} __attribute__ ((packed));
+
+/* peripheral side ep0 states */
+enum musb_g_ep0_state {
+        MUSB_EP0_STAGE_SETUP,           /* idle, waiting for setup */
+        MUSB_EP0_STAGE_TX,              /* IN data */
+        MUSB_EP0_STAGE_RX,              /* OUT data */
+        MUSB_EP0_STAGE_STATUSIN,        /* (after OUT data) */
+        MUSB_EP0_STAGE_STATUSOUT,       /* (after IN data) */
+        MUSB_EP0_STAGE_ACKWAIT,         /* after zlp, before statusin */
+} __attribute__ ((packed));
+
+/* OTG protocol constants */
+#define OTG_TIME_A_WAIT_VRISE   100             /* msec (max) */
+#define OTG_TIME_A_WAIT_BCON    0               /* 0=infinite; min 1000 msec */
+#define OTG_TIME_A_IDLE_BDIS    200             /* msec (min) */
+
+/*************************** REGISTER ACCESS ********************************/
+
+/* Endpoint registers (other than dynfifo setup) can be accessed either
+ * directly with the "flat" model, or after setting up an index register.
+ */
+
+#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
+                || defined(CONFIG_ARCH_OMAP3430)
+/* REVISIT indexed access seemed to
+ * misbehave (on DaVinci) for at least peripheral IN ...
+ */
+#define MUSB_FLAT_REG
+#endif
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+#if     defined(CONFIG_USB_TUSB6010)
+#define musb_ep_select(_mbase, _epnum) \
+        musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define MUSB_EP_OFFSET                  MUSB_TUSB_OFFSET
+
+/* "flat" mapping: each endpoint has its own i/o address */
+#elif   defined(MUSB_FLAT_REG)
+#define musb_ep_select(_mbase, _epnum)  (((void)(_mbase)), ((void)(_epnum)))
+#define MUSB_EP_OFFSET                  MUSB_FLAT_OFFSET
+
+/* "indexed" mapping: INDEX register controls register bank select */
+#else
+#define musb_ep_select(_mbase, _epnum) \
+        musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define MUSB_EP_OFFSET                  MUSB_INDEXED_OFFSET
+#endif
+
+/****************************** FUNCTIONS ********************************/
+
+#define MUSB_HST_MODE(_musb)\
+        { (_musb)->is_host = true; }
+#define MUSB_DEV_MODE(_musb) \
+        { (_musb)->is_host = false; }
+
+#define test_devctl_hst_mode(_x) \
+        (musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
+
+#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
+
+/******************************** TYPES *************************************/
+
+/*
+ * struct musb_hw_ep - endpoint hardware (bidirectional)
+ *
+ * Ordered slightly for better cacheline locality.
+ */
+struct musb_hw_ep {
+        struct musb             *musb;
+        void __iomem            *fifo;
+        void __iomem            *regs;
+
+#ifdef CONFIG_USB_TUSB6010
+        void __iomem            *conf;
+#endif
+
+        /* index in musb->endpoints[]  */
+        u8                      epnum;
+
+        /* hardware configuration, possibly dynamic */
+        bool                    is_shared_fifo;
+        bool                    tx_double_buffered;
+        bool                    rx_double_buffered;
+        u16                     max_packet_sz_tx;
+        u16                     max_packet_sz_rx;
+
+        struct dma_channel      *tx_channel;
+        struct dma_channel      *rx_channel;
+
+#ifdef CONFIG_USB_TUSB6010
+        /* TUSB has "asynchronous" and "synchronous" dma modes */
+        dma_addr_t              fifo_async;
+        dma_addr_t              fifo_sync;
+        void __iomem            *fifo_sync_va;
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        void __iomem            *target_regs;
+
+        /* currently scheduled peripheral endpoint */
+        struct musb_qh          *in_qh;
+        struct musb_qh          *out_qh;
+
+        u8                      rx_reinit;
+        u8                      tx_reinit;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+        /* peripheral side */
+        struct musb_ep          ep_in;                  /* TX */
+        struct musb_ep          ep_out;                 /* RX */
+#endif
+};
+
+static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+        return next_request(&hw_ep->ep_in);
+#else
+        return NULL;
+#endif
+}
+
+static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+        return next_request(&hw_ep->ep_out);
+#else
+        return NULL;
+#endif
+}
+
+/*
+ * struct musb - Driver instance data.
+ */
+struct musb {
+        /* device lock */
+        spinlock_t              lock;
+        struct clk              *clock;
+        irqreturn_t             (*isr)(int, void *);
+        struct work_struct      irq_work;
+
+/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
+#define MUSB_PORT_STAT_RESUME   (1 << 31)
+
+        u32                     port1_status;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        unsigned long           rh_timer;
+
+        enum musb_h_ep0_state   ep0_stage;
+
+        /* bulk traffic normally dedicates endpoint hardware, and each
+         * direction has its own ring of host side endpoints.
+         * we try to progress the transfer at the head of each endpoint's
+         * queue until it completes or NAKs too much; then we try the next
+         * endpoint.
+         */
+        struct musb_hw_ep       *bulk_ep;
+
+        struct list_head        control;        /* of musb_qh */
+        struct list_head        in_bulk;        /* of musb_qh */
+        struct list_head        out_bulk;       /* of musb_qh */
+        struct musb_qh          *periodic[32];  /* tree of interrupt+iso */
+#endif
+
+        /* called with IRQs blocked; ON/nonzero implies starting a session,
+         * and waiting at least a_wait_vrise_tmout.
+         */
+        void                    (*board_set_vbus)(struct musb *, int is_on);
+
+        struct dma_controller   *dma_controller;
+
+        struct device           *controller;
+        void __iomem            *ctrl_base;
+        void __iomem            *mregs;
+
+#ifdef CONFIG_USB_TUSB6010
+        dma_addr_t              async;
+        dma_addr_t              sync;
+        void __iomem            *sync_va;
+#endif
+
+        /* passed down from chip/board specific irq handlers */
+        u8                      int_usb;
+        u16                     int_rx;
+        u16                     int_tx;
+
+        struct otg_transceiver  xceiv;
+
+        int nIrq;
+
+        struct musb_hw_ep        endpoints[MUSB_C_NUM_EPS];
+#define control_ep              endpoints
+
+#define VBUSERR_RETRY_COUNT     3
+        u16                     vbuserr_retry;
+        u16 epmask;
+        u8 nr_endpoints;
+
+        u8 board_mode;          /* enum musb_mode */
+        int                     (*board_set_power)(int state);
+
+        int                     (*set_clock)(struct clk *clk, int is_active);
+
+        u8                      min_power;      /* vbus for periph, in mA/2 */
+
+        bool                    is_host;
+
+        int                     a_wait_bcon;    /* VBUS timeout in msecs */
+        unsigned long           idle_timeout;   /* Next timeout in jiffies */
+
+        /* active means connected and not suspended */
+        unsigned                is_active:1;
+
+        unsigned is_multipoint:1;
+        unsigned ignore_disconnect:1;   /* during bus resets */
+
+#ifdef C_MP_TX
+        unsigned bulk_split:1;
+#define can_bulk_split(musb,type) \
+                (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
+#else
+#define can_bulk_split(musb, type)      0
+#endif
+
+#ifdef C_MP_RX
+        unsigned bulk_combine:1;
+#define can_bulk_combine(musb,type) \
+                (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
+#else
+#define can_bulk_combine(musb, type)    0
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+        /* is_suspended means USB B_PERIPHERAL suspend */
+        unsigned                is_suspended:1;
+
+        /* may_wakeup means remote wakeup is enabled */
+        unsigned                may_wakeup:1;
+
+        /* is_self_powered is reported in device status and the
+         * config descriptor.  is_bus_powered means B_PERIPHERAL
+         * draws some VBUS current; both can be true.
+         */
+        unsigned                is_self_powered:1;
+        unsigned                is_bus_powered:1;
+
+        unsigned                set_address:1;
+        unsigned                test_mode:1;
+        unsigned                softconnect:1;
+
+        u8                      address;
+        u8                      test_mode_nr;
+        u16                     ackpend;                /* ep0 */
+        enum musb_g_ep0_state   ep0_state;
+        struct usb_gadget       g;                      /* the gadget */
+        struct usb_gadget_driver *gadget_driver;        /* its driver */
+#endif
+
+        struct musb_hdrc_config *config;
+
+#ifdef MUSB_CONFIG_PROC_FS
+        struct proc_dir_entry *proc_entry;
+#endif
+};
+
+static inline void musb_set_vbus(struct musb *musb, int is_on)
+{
+        musb->board_set_vbus(musb, is_on);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+static inline struct musb *gadget_to_musb(struct usb_gadget *g)
+{
+        return container_of(g, struct musb, g);
+}
+#endif
+
+
+/***************************** Glue it together *****************************/
+
+extern const char musb_driver_name[];
+
+extern void musb_start(struct musb *musb);
+extern void musb_stop(struct musb *musb);
+
+extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
+extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
+
+extern void musb_load_testpacket(struct musb *);
+
+extern irqreturn_t musb_interrupt(struct musb *);
+
+extern void musb_platform_enable(struct musb *musb);
+extern void musb_platform_disable(struct musb *musb);
+
+extern void musb_hnp_stop(struct musb *musb);
+
+extern void musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+
+#if defined(CONFIG_USB_TUSB6010) || \
+        defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
+#else
+#define musb_platform_try_idle(x, y)            do {} while (0)
+#endif
+
+#ifdef CONFIG_USB_TUSB6010
+extern int musb_platform_get_vbus_status(struct musb *musb);
+#else
+#define musb_platform_get_vbus_status(x)        0
+#endif
+
+extern int __init musb_platform_init(struct musb *musb);
+extern int musb_platform_exit(struct musb *musb);
+
+/*-------------------------- ProcFS definitions ---------------------*/
+
+struct proc_dir_entry;
+
+#if (MUSB_DEBUG > 0) && defined(MUSB_CONFIG_PROC_FS)
+extern struct proc_dir_entry *musb_debug_create(char *name, struct musb *data);
+extern void musb_debug_delete(char *name, struct musb *data);
+
+#else
+static inline struct proc_dir_entry *
+musb_debug_create(char *name, struct musb *data)
+{
+        return NULL;
+}
+static inline void musb_debug_delete(char *name, struct musb *data)
+{
+}
+#endif
+
+#endif  /* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
new file mode 100644
index 000000000000..3bdb311e820d
--- /dev/null
+++ b/drivers/usb/musb/musb_debug.h
@@ -0,0 +1,66 @@
+/*
+ * MUSB OTG driver debug defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_DEBUG_H__
+#define __MUSB_LINUX_DEBUG_H__
+
+#define yprintk(facility, format, args...) \
+        do { printk(facility "%s %d: " format , \
+        __func__, __LINE__ , ## args); } while (0)
+#define WARNING(fmt, args...) yprintk(KERN_WARNING, fmt, ## args)
+#define INFO(fmt, args...) yprintk(KERN_INFO, fmt, ## args)
+#define ERR(fmt, args...) yprintk(KERN_ERR, fmt, ## args)
+
+#define xprintk(level, facility, format, args...) do { \
+        if (_dbg_level(level)) { \
+                printk(facility "%s %d: " format , \
+                                __func__, __LINE__ , ## args); \
+        } } while (0)
+
+#if MUSB_DEBUG > 0
+extern unsigned debug;
+#else
+#define debug   0
+#endif
+
+static inline int _dbg_level(unsigned l)
+{
+        return debug >= l;
+}
+
+#define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args)
+
+extern const char *otg_state_string(struct musb *);
+
+#endif                          /*  __MUSB_LINUX_DEBUG_H__ */
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
new file mode 100644
index 000000000000..0a2c4e3602c1
--- /dev/null
+++ b/drivers/usb/musb/musb_dma.h
@@ -0,0 +1,172 @@
+/*
+ * MUSB OTG driver DMA controller abstraction
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_DMA_H__
+#define __MUSB_DMA_H__
+
+struct musb_hw_ep;
+
+/*
+ * DMA Controller Abstraction
+ *
+ * DMA Controllers are abstracted to allow use of a variety of different
+ * implementations of DMA, as allowed by the Inventra USB cores.  On the
+ * host side, usbcore sets up the DMA mappings and flushes caches; on the
+ * peripheral side, the gadget controller driver does.  Responsibilities
+ * of a DMA controller driver include:
+ *
+ *  - Handling the details of moving multiple USB packets
+ *    in cooperation with the Inventra USB core, including especially
+ *    the correct RX side treatment of short packets and buffer-full
+ *    states (both of which terminate transfers).
+ *
+ *  - Knowing the correlation between dma channels and the
+ *    Inventra core's local endpoint resources and data direction.
+ *
+ *  - Maintaining a list of allocated/available channels.
+ *
+ *  - Updating channel status on interrupts,
+ *    whether shared with the Inventra core or separate.
+ */
+
+#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+#define is_dma_capable()        (1)
+#else
+#define is_dma_capable()        (0)
+#endif
+
+#ifdef CONFIG_USB_TI_CPPI_DMA
+#define is_cppi_enabled()       1
+#else
+#define is_cppi_enabled()       0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()                 1
+#else
+#define tusb_dma_omap()                 0
+#endif
+
+/*
+ * DMA channel status ... updated by the dma controller driver whenever that
+ * status changes, and protected by the overall controller spinlock.
+ */
+enum dma_channel_status {
+        /* unallocated */
+        MUSB_DMA_STATUS_UNKNOWN,
+        /* allocated ... but not busy, no errors */
+        MUSB_DMA_STATUS_FREE,
+        /* busy ... transactions are active */
+        MUSB_DMA_STATUS_BUSY,
+        /* transaction(s) aborted due to ... dma or memory bus error */
+        MUSB_DMA_STATUS_BUS_ABORT,
+        /* transaction(s) aborted due to ... core error or USB fault */
+        MUSB_DMA_STATUS_CORE_ABORT
+};
+
+struct dma_controller;
+
+/**
+ * struct dma_channel - A DMA channel.
+ * @private_data: channel-private data
+ * @max_len: the maximum number of bytes the channel can move in one
+ *      transaction (typically representing many USB maximum-sized packets)
+ * @actual_len: how many bytes have been transferred
+ * @status: current channel status (updated e.g. on interrupt)
+ * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
+ *
+ * channels are associated with an endpoint for the duration of at least
+ * one usb transfer.
+ */
+struct dma_channel {
+        void                    *private_data;
+        /* FIXME not void* private_data, but a dma_controller * */
+        size_t                  max_len;
+        size_t                  actual_len;
+        enum dma_channel_status status;
+        bool                    desired_mode;
+};
+
+/*
+ * dma_channel_status - return status of dma channel
+ * @c: the channel
+ *
+ * Returns the software's view of the channel status.  If that status is BUSY
+ * then it's possible that the hardware has completed (or aborted) a transfer,
+ * so the driver needs to update that status.
+ */
+static inline enum dma_channel_status
+dma_channel_status(struct dma_channel *c)
+{
+        return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/**
+ * struct dma_controller - A DMA Controller.
+ * @start: call this to start a DMA controller;
+ *      return 0 on success, else negative errno
+ * @stop: call this to stop a DMA controller
+ *      return 0 on success, else negative errno
+ * @channel_alloc: call this to allocate a DMA channel
+ * @channel_release: call this to release a DMA channel
+ * @channel_abort: call this to abort a pending DMA transaction,
+ *      returning it to FREE (but allocated) state
+ *
+ * Controllers manage dma channels.
+ */
+struct dma_controller {
+        int                     (*start)(struct dma_controller *);
+        int                     (*stop)(struct dma_controller *);
+        struct dma_channel      *(*channel_alloc)(struct dma_controller *,
+                                        struct musb_hw_ep *, u8 is_tx);
+        void                    (*channel_release)(struct dma_channel *);
+        int                     (*channel_program)(struct dma_channel *channel,
+                                                        u16 maxpacket, u8 mode,
+                                                        dma_addr_t dma_addr,
+                                                        u32 length);
+        int                     (*channel_abort)(struct dma_channel *);
+};
+
+/* called after channel_program(), may indicate a fault */
+extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
+
+
+extern struct dma_controller *__init
+dma_controller_create(struct musb *, void __iomem *);
+
+extern void dma_controller_destroy(struct dma_controller *);
+
+#endif  /* __MUSB_DMA_H__ */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
new file mode 100644
index 000000000000..d6a802c224fa
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.c
@@ -0,0 +1,2031 @@
+/*
+ * MUSB OTG driver peripheral support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/stat.h>
+#include <linux/dma-mapping.h>
+
+#include "musb_core.h"
+
+
+/* MUSB PERIPHERAL status 3-mar-2006:
+ *
+ * - EP0 seems solid.  It passes both USBCV and usbtest control cases.
+ *   Minor glitches:
+ *
+ *     + remote wakeup to Linux hosts work, but saw USBCV failures;
+ *       in one test run (operator error?)
+ *     + endpoint halt tests -- in both usbtest and usbcv -- seem
+ *       to break when dma is enabled ... is something wrongly
+ *       clearing SENDSTALL?
+ *
+ * - Mass storage behaved ok when last tested.  Network traffic patterns
+ *   (with lots of short transfers etc) need retesting; they turn up the
+ *   worst cases of the DMA, since short packets are typical but are not
+ *   required.
+ *
+ * - TX/IN
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + no cppi throughput issues other than no-hw-queueing
+ *     + failed with FLAT_REG (DaVinci)
+ *     + seems to behave with double buffering, PIO -and- CPPI
+ *     + with gadgetfs + AIO, requests got lost?
+ *
+ * - RX/OUT
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + dma is slow in typical case (short_not_ok is clear)
+ *     + double buffering ok with PIO
+ *     + double buffering *FAILS* with CPPI, wrong data bytes sometimes
+ *     + request lossage observed with gadgetfs
+ *
+ * - ISO not tested ... might work, but only weakly isochronous
+ *
+ * - Gadget driver disabling of softconnect during bind() is ignored; so
+ *   drivers can't hold off host requests until userspace is ready.
+ *   (Workaround:  they can turn it off later.)
+ *
+ * - PORTABILITY (assumes PIO works):
+ *     + DaVinci, basically works with cppi dma
+ *     + OMAP 2430, ditto with mentor dma
+ *     + TUSB 6010, platform-specific dma in the works
+ */
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Immediately complete a request.
+ *
+ * @param request the request to complete
+ * @param status the status to complete the request with
+ * Context: controller locked, IRQs blocked.
+ */
+void musb_g_giveback(
+        struct musb_ep          *ep,
+        struct usb_request      *request,
+        int                     status)
+__releases(ep->musb->lock)
+__acquires(ep->musb->lock)
+{
+        struct musb_request     *req;
+        struct musb             *musb;
+        int                     busy = ep->busy;
+
+        req = to_musb_request(request);
+
+        list_del(&request->list);
+        if (req->request.status == -EINPROGRESS)
+                req->request.status = status;
+        musb = req->musb;
+
+        ep->busy = 1;
+        spin_unlock(&musb->lock);
+        if (is_dma_capable()) {
+                if (req->mapped) {
+                        dma_unmap_single(musb->controller,
+                                        req->request.dma,
+                                        req->request.length,
+                                        req->tx
+                                                ? DMA_TO_DEVICE
+                                                : DMA_FROM_DEVICE);
+                        req->request.dma = DMA_ADDR_INVALID;
+                        req->mapped = 0;
+                } else if (req->request.dma != DMA_ADDR_INVALID)
+                        dma_sync_single_for_cpu(musb->controller,
+                                        req->request.dma,
+                                        req->request.length,
+                                        req->tx
+                                                ? DMA_TO_DEVICE
+                                                : DMA_FROM_DEVICE);
+        }
+        if (request->status == 0)
+                DBG(5, "%s done request %p,  %d/%d\n",
+                                ep->end_point.name, request,
+                                req->request.actual, req->request.length);
+        else
+                DBG(2, "%s request %p, %d/%d fault %d\n",
+                                ep->end_point.name, request,
+                                req->request.actual, req->request.length,
+                                request->status);
+        req->request.complete(&req->ep->end_point, &req->request);
+        spin_lock(&musb->lock);
+        ep->busy = busy;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Abort requests queued to an endpoint using the status. Synchronous.
+ * caller locked controller and blocked irqs, and selected this ep.
+ */
+static void nuke(struct musb_ep *ep, const int status)
+{
+        struct musb_request     *req = NULL;
+        void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
+
+        ep->busy = 1;
+
+        if (is_dma_capable() && ep->dma) {
+                struct dma_controller   *c = ep->musb->dma_controller;
+                int value;
+                if (ep->is_in) {
+                        musb_writew(epio, MUSB_TXCSR,
+                                        0 | MUSB_TXCSR_FLUSHFIFO);
+                        musb_writew(epio, MUSB_TXCSR,
+                                        0 | MUSB_TXCSR_FLUSHFIFO);
+                } else {
+                        musb_writew(epio, MUSB_RXCSR,
+                                        0 | MUSB_RXCSR_FLUSHFIFO);
+                        musb_writew(epio, MUSB_RXCSR,
+                                        0 | MUSB_RXCSR_FLUSHFIFO);
+                }
+
+                value = c->channel_abort(ep->dma);
+                DBG(value ? 1 : 6, "%s: abort DMA --> %d\n", ep->name, value);
+                c->channel_release(ep->dma);
+                ep->dma = NULL;
+        }
+
+        while (!list_empty(&(ep->req_list))) {
+                req = container_of(ep->req_list.next, struct musb_request,
+                                request.list);
+                musb_g_giveback(ep, &req->request, status);
+        }
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* Data transfers - pure PIO, pure DMA, or mixed mode */
+
+/*
+ * This assumes the separate CPPI engine is responding to DMA requests
+ * from the usb core ... sequenced a bit differently from mentor dma.
+ */
+
+static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
+{
+        if (can_bulk_split(musb, ep->type))
+                return ep->hw_ep->max_packet_sz_tx;
+        else
+                return ep->packet_sz;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral tx (IN) using Mentor DMA works as follows:
+        Only mode 0 is used for transfers <= wPktSize,
+        mode 1 is used for larger transfers,
+
+        One of the following happens:
+        - Host sends IN token which causes an endpoint interrupt
+                -> TxAvail
+                        -> if DMA is currently busy, exit.
+                        -> if queue is non-empty, txstate().
+
+        - Request is queued by the gadget driver.
+                -> if queue was previously empty, txstate()
+
+        txstate()
+                -> start
+                  /\    -> setup DMA
+                  |     (data is transferred to the FIFO, then sent out when
+                  |     IN token(s) are recd from Host.
+                  |             -> DMA interrupt on completion
+                  |                calls TxAvail.
+                  |                   -> stop DMA, ~DmaEenab,
+                  |                   -> set TxPktRdy for last short pkt or zlp
+                  |                   -> Complete Request
+                  |                   -> Continue next request (call txstate)
+                  |___________________________________|
+
+ * Non-Mentor DMA engines can of course work differently, such as by
+ * upleveling from irq-per-packet to irq-per-buffer.
+ */
+
+#endif
+
+/*
+ * An endpoint is transmitting data. This can be called either from
+ * the IRQ routine or from ep.queue() to kickstart a request on an
+ * endpoint.
+ *
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void txstate(struct musb *musb, struct musb_request *req)
+{
+        u8                      epnum = req->epnum;
+        struct musb_ep          *musb_ep;
+        void __iomem            *epio = musb->endpoints[epnum].regs;
+        struct usb_request      *request;
+        u16                     fifo_count = 0, csr;
+        int                     use_dma = 0;
+
+        musb_ep = req->ep;
+
+        /* we shouldn't get here while DMA is active ... but we do ... */
+        if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+                DBG(4, "dma pending...\n");
+                return;
+        }
+
+        /* read TXCSR before */
+        csr = musb_readw(epio, MUSB_TXCSR);
+
+        request = &req->request;
+        fifo_count = min(max_ep_writesize(musb, musb_ep),
+                        (int)(request->length - request->actual));
+
+        if (csr & MUSB_TXCSR_TXPKTRDY) {
+                DBG(5, "%s old packet still ready , txcsr %03x\n",
+                                musb_ep->end_point.name, csr);
+                return;
+        }
+
+        if (csr & MUSB_TXCSR_P_SENDSTALL) {
+                DBG(5, "%s stalling, txcsr %03x\n",
+                                musb_ep->end_point.name, csr);
+                return;
+        }
+
+        DBG(4, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
+                        epnum, musb_ep->packet_sz, fifo_count,
+                        csr);
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+        if (is_dma_capable() && musb_ep->dma) {
+                struct dma_controller   *c = musb->dma_controller;
+
+                use_dma = (request->dma != DMA_ADDR_INVALID);
+
+                /* MUSB_TXCSR_P_ISO is still set correctly */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+                {
+                        size_t request_size;
+
+                        /* setup DMA, then program endpoint CSR */
+                        request_size = min(request->length,
+                                                musb_ep->dma->max_len);
+                        if (request_size <= musb_ep->packet_sz)
+                                musb_ep->dma->desired_mode = 0;
+                        else
+                                musb_ep->dma->desired_mode = 1;
+
+                        use_dma = use_dma && c->channel_program(
+                                        musb_ep->dma, musb_ep->packet_sz,
+                                        musb_ep->dma->desired_mode,
+                                        request->dma, request_size);
+                        if (use_dma) {
+                                if (musb_ep->dma->desired_mode == 0) {
+                                        /* ASSERT: DMAENAB is clear */
+                                        csr &= ~(MUSB_TXCSR_AUTOSET |
+                                                        MUSB_TXCSR_DMAMODE);
+                                        csr |= (MUSB_TXCSR_DMAENAB |
+                                                        MUSB_TXCSR_MODE);
+                                        /* against programming guide */
+                                } else
+                                        csr |= (MUSB_TXCSR_AUTOSET
+                                                        | MUSB_TXCSR_DMAENAB
+                                                        | MUSB_TXCSR_DMAMODE
+                                                        | MUSB_TXCSR_MODE);
+
+                                csr &= ~MUSB_TXCSR_P_UNDERRUN;
+                                musb_writew(epio, MUSB_TXCSR, csr);
+                        }
+                }
+
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+                /* program endpoint CSR first, then setup DMA */
+                csr &= ~(MUSB_TXCSR_AUTOSET
+                                | MUSB_TXCSR_DMAMODE
+                                | MUSB_TXCSR_P_UNDERRUN
+                                | MUSB_TXCSR_TXPKTRDY);
+                csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
+                musb_writew(epio, MUSB_TXCSR,
+                        (MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
+                                | csr);
+
+                /* ensure writebuffer is empty */
+                csr = musb_readw(epio, MUSB_TXCSR);
+
+                /* NOTE host side sets DMAENAB later than this; both are
+                 * OK since the transfer dma glue (between CPPI and Mentor
+                 * fifos) just tells CPPI it could start.  Data only moves
+                 * to the USB TX fifo when both fifos are ready.
+                 */
+
+                /* "mode" is irrelevant here; handle terminating ZLPs like
+                 * PIO does, since the hardware RNDIS mode seems unreliable
+                 * except for the last-packet-is-already-short case.
+                 */
+                use_dma = use_dma && c->channel_program(
+                                musb_ep->dma, musb_ep->packet_sz,
+                                0,
+                                request->dma,
+                                request->length);
+                if (!use_dma) {
+                        c->channel_release(musb_ep->dma);
+                        musb_ep->dma = NULL;
+                        /* ASSERT: DMAENAB clear */
+                        csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+                        /* invariant: prequest->buf is non-null */
+                }
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+                use_dma = use_dma && c->channel_program(
+                                musb_ep->dma, musb_ep->packet_sz,
+                                request->zero,
+                                request->dma,
+                                request->length);
+#endif
+        }
+#endif
+
+        if (!use_dma) {
+                musb_write_fifo(musb_ep->hw_ep, fifo_count,
+                                (u8 *) (request->buf + request->actual));
+                request->actual += fifo_count;
+                csr |= MUSB_TXCSR_TXPKTRDY;
+                csr &= ~MUSB_TXCSR_P_UNDERRUN;
+                musb_writew(epio, MUSB_TXCSR, csr);
+        }
+
+        /* host may already have the data when this message shows... */
+        DBG(3, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
+                        musb_ep->end_point.name, use_dma ? "dma" : "pio",
+                        request->actual, request->length,
+                        musb_readw(epio, MUSB_TXCSR),
+                        fifo_count,
+                        musb_readw(epio, MUSB_TXMAXP));
+}
+
+/*
+ * FIFO state update (e.g. data ready).
+ * Called from IRQ,  with controller locked.
+ */
+void musb_g_tx(struct musb *musb, u8 epnum)
+{
+        u16                     csr;
+        struct usb_request      *request;
+        u8 __iomem              *mbase = musb->mregs;
+        struct musb_ep          *musb_ep = &musb->endpoints[epnum].ep_in;
+        void __iomem            *epio = musb->endpoints[epnum].regs;
+        struct dma_channel      *dma;
+
+        musb_ep_select(mbase, epnum);
+        request = next_request(musb_ep);
+
+        csr = musb_readw(epio, MUSB_TXCSR);
+        DBG(4, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
+
+        dma = is_dma_capable() ? musb_ep->dma : NULL;
+        do {
+                /* REVISIT for high bandwidth, MUSB_TXCSR_P_INCOMPTX
+                 * probably rates reporting as a host error
+                 */
+                if (csr & MUSB_TXCSR_P_SENTSTALL) {
+                        csr |= MUSB_TXCSR_P_WZC_BITS;
+                        csr &= ~MUSB_TXCSR_P_SENTSTALL;
+                        musb_writew(epio, MUSB_TXCSR, csr);
+                        if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+                                dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+                                musb->dma_controller->channel_abort(dma);
+                        }
+
+                        if (request)
+                                musb_g_giveback(musb_ep, request, -EPIPE);
+
+                        break;
+                }
+
+                if (csr & MUSB_TXCSR_P_UNDERRUN) {
+                        /* we NAKed, no big deal ... little reason to care */
+                        csr |= MUSB_TXCSR_P_WZC_BITS;
+                        csr &= ~(MUSB_TXCSR_P_UNDERRUN
+                                        | MUSB_TXCSR_TXPKTRDY);
+                        musb_writew(epio, MUSB_TXCSR, csr);
+                        DBG(20, "underrun on ep%d, req %p\n", epnum, request);
+                }
+
+                if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+                        /* SHOULD NOT HAPPEN ... has with cppi though, after
+                         * changing SENDSTALL (and other cases); harmless?
+                         */
+                        DBG(5, "%s dma still busy?\n", musb_ep->end_point.name);
+                        break;
+                }
+
+                if (request) {
+                        u8      is_dma = 0;
+
+                        if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
+                                is_dma = 1;
+                                csr |= MUSB_TXCSR_P_WZC_BITS;
+                                csr &= ~(MUSB_TXCSR_DMAENAB
+                                                | MUSB_TXCSR_P_UNDERRUN
+                                                | MUSB_TXCSR_TXPKTRDY);
+                                musb_writew(epio, MUSB_TXCSR, csr);
+                                /* ensure writebuffer is empty */
+                                csr = musb_readw(epio, MUSB_TXCSR);
+                                request->actual += musb_ep->dma->actual_len;
+                                DBG(4, "TXCSR%d %04x, dma off, "
+                                                "len %zu, req %p\n",
+                                        epnum, csr,
+                                        musb_ep->dma->actual_len,
+                                        request);
+                        }
+
+                        if (is_dma || request->actual == request->length) {
+
+                                /* First, maybe a terminating short packet.
+                                 * Some DMA engines might handle this by
+                                 * themselves.
+                                 */
+                                if ((request->zero
+                                                && request->length
+                                                && (request->length
+                                                        % musb_ep->packet_sz)
+                                                        == 0)
+#ifdef CONFIG_USB_INVENTRA_DMA
+                                        || (is_dma &&
+                                                ((!dma->desired_mode) ||
+                                                    (request->actual &
+                                                    (musb_ep->packet_sz - 1))))
+#endif
+                                ) {
+                                        /* on dma completion, fifo may not
+                                         * be available yet ...
+                                         */
+                                        if (csr & MUSB_TXCSR_TXPKTRDY)
+                                                break;
+
+                                        DBG(4, "sending zero pkt\n");
+                                        musb_writew(epio, MUSB_TXCSR,
+                                                        MUSB_TXCSR_MODE
+                                                        | MUSB_TXCSR_TXPKTRDY);
+                                        request->zero = 0;
+                                }
+
+                                /* ... or if not, then complete it */
+                                musb_g_giveback(musb_ep, request, 0);
+
+                                /* kickstart next transfer if appropriate;
+                                 * the packet that just completed might not
+                                 * be transmitted for hours or days.
+                                 * REVISIT for double buffering...
+                                 * FIXME revisit for stalls too...
+                                 */
+                                musb_ep_select(mbase, epnum);
+                                csr = musb_readw(epio, MUSB_TXCSR);
+                                if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+                                        break;
+                                request = musb_ep->desc
+                                                ? next_request(musb_ep)
+                                                : NULL;
+                                if (!request) {
+                                        DBG(4, "%s idle now\n",
+                                                musb_ep->end_point.name);
+                                        break;
+                                }
+                        }
+
+                        txstate(musb, to_musb_request(request));
+                }
+
+        } while (0);
+}
+
+/* ------------------------------------------------------------ */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral rx (OUT) using Mentor DMA works as follows:
+        - Only mode 0 is used.
+
+        - Request is queued by the gadget class driver.
+                -> if queue was previously empty, rxstate()
+
+        - Host sends OUT token which causes an endpoint interrupt
+          /\      -> RxReady
+          |           -> if request queued, call rxstate
+          |             /\      -> setup DMA
+          |             |            -> DMA interrupt on completion
+          |             |               -> RxReady
+          |             |                     -> stop DMA
+          |             |                     -> ack the read
+          |             |                     -> if data recd = max expected
+          |             |                               by the request, or host
+          |             |                               sent a short packet,
+          |             |                               complete the request,
+          |             |                               and start the next one.
+          |             |_____________________________________|
+          |                                      else just wait for the host
+          |                                         to send the next OUT token.
+          |__________________________________________________|
+
+ * Non-Mentor DMA engines can of course work differently.
+ */
+
+#endif
+
+/*
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void rxstate(struct musb *musb, struct musb_request *req)
+{
+        u16                     csr = 0;
+        const u8                epnum = req->epnum;
+        struct usb_request      *request = &req->request;
+        struct musb_ep          *musb_ep = &musb->endpoints[epnum].ep_out;
+        void __iomem            *epio = musb->endpoints[epnum].regs;
+        u16                     fifo_count = 0;
+        u16                     len = musb_ep->packet_sz;
+
+        csr = musb_readw(epio, MUSB_RXCSR);
+
+        if (is_cppi_enabled() && musb_ep->dma) {
+                struct dma_controller   *c = musb->dma_controller;
+                struct dma_channel      *channel = musb_ep->dma;
+
+                /* NOTE:  CPPI won't actually stop advancing the DMA
+                 * queue after short packet transfers, so this is almost
+                 * always going to run as IRQ-per-packet DMA so that
+                 * faults will be handled correctly.
+                 */
+                if (c->channel_program(channel,
+                                musb_ep->packet_sz,
+                                !request->short_not_ok,
+                                request->dma + request->actual,
+                                request->length - request->actual)) {
+
+                        /* make sure that if an rxpkt arrived after the irq,
+                         * the cppi engine will be ready to take it as soon
+                         * as DMA is enabled
+                         */
+                        csr &= ~(MUSB_RXCSR_AUTOCLEAR
+                                        | MUSB_RXCSR_DMAMODE);
+                        csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS;
+                        musb_writew(epio, MUSB_RXCSR, csr);
+                        return;
+                }
+        }
+
+        if (csr & MUSB_RXCSR_RXPKTRDY) {
+                len = musb_readw(epio, MUSB_RXCOUNT);
+                if (request->actual < request->length) {
+#ifdef CONFIG_USB_INVENTRA_DMA
+                        if (is_dma_capable() && musb_ep->dma) {
+                                struct dma_controller   *c;
+                                struct dma_channel      *channel;
+                                int                     use_dma = 0;
+
+                                c = musb->dma_controller;
+                                channel = musb_ep->dma;
+
+        /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+         * mode 0 only. So we do not get endpoint interrupts due to DMA
+         * completion. We only get interrupts from DMA controller.
+         *
+         * We could operate in DMA mode 1 if we knew the size of the tranfer
+         * in advance. For mass storage class, request->length = what the host
+         * sends, so that'd work.  But for pretty much everything else,
+         * request->length is routinely more than what the host sends. For
+         * most these gadgets, end of is signified either by a short packet,
+         * or filling the last byte of the buffer.  (Sending extra data in
+         * that last pckate should trigger an overflow fault.)  But in mode 1,
+         * we don't get DMA completion interrrupt for short packets.
+         *
+         * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+         * to get endpoint interrupt on every DMA req, but that didn't seem
+         * to work reliably.
+         *
+         * REVISIT an updated g_file_storage can set req->short_not_ok, which
+         * then becomes usable as a runtime "use mode 1" hint...
+         */
+
+                                csr |= MUSB_RXCSR_DMAENAB;
+#ifdef USE_MODE1
+                                csr |= MUSB_RXCSR_AUTOCLEAR;
+                                /* csr |= MUSB_RXCSR_DMAMODE; */
+
+                                /* this special sequence (enabling and then
+                                 * disabling MUSB_RXCSR_DMAMODE) is required
+                                 * to get DMAReq to activate
+                                 */
+                                musb_writew(epio, MUSB_RXCSR,
+                                        csr | MUSB_RXCSR_DMAMODE);
+#endif
+                                musb_writew(epio, MUSB_RXCSR, csr);
+
+                                if (request->actual < request->length) {
+                                        int transfer_size = 0;
+#ifdef USE_MODE1
+                                        transfer_size = min(request->length,
+                                                        channel->max_len);
+#else
+                                        transfer_size = len;
+#endif
+                                        if (transfer_size <= musb_ep->packet_sz)
+                                                musb_ep->dma->desired_mode = 0;
+                                        else
+                                                musb_ep->dma->desired_mode = 1;
+
+                                        use_dma = c->channel_program(
+                                                        channel,
+                                                        musb_ep->packet_sz,
+                                                        channel->desired_mode,
+                                                        request->dma
+                                                        + request->actual,
+                                                        transfer_size);
+                                }
+
+                                if (use_dma)
+                                        return;
+                        }
+#endif  /* Mentor's DMA */
+
+                        fifo_count = request->length - request->actual;
+                        DBG(3, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
+                                        musb_ep->end_point.name,
+                                        len, fifo_count,
+                                        musb_ep->packet_sz);
+
+                        fifo_count = min(len, fifo_count);
+
+#ifdef  CONFIG_USB_TUSB_OMAP_DMA
+                        if (tusb_dma_omap() && musb_ep->dma) {
+                                struct dma_controller *c = musb->dma_controller;
+                                struct dma_channel *channel = musb_ep->dma;
+                                u32 dma_addr = request->dma + request->actual;
+                                int ret;
+
+                                ret = c->channel_program(channel,
+                                                musb_ep->packet_sz,
+                                                channel->desired_mode,
+                                                dma_addr,
+                                                fifo_count);
+                                if (ret)
+                                        return;
+                        }
+#endif
+
+                        musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
+                                        (request->buf + request->actual));
+                        request->actual += fifo_count;
+
+                        /* REVISIT if we left anything in the fifo, flush
+                         * it and report -EOVERFLOW
+                         */
+
+                        /* ack the read! */
+                        csr |= MUSB_RXCSR_P_WZC_BITS;
+                        csr &= ~MUSB_RXCSR_RXPKTRDY;
+                        musb_writew(epio, MUSB_RXCSR, csr);
+                }
+        }
+
+        /* reach the end or short packet detected */
+        if (request->actual == request->length || len < musb_ep->packet_sz)
+                musb_g_giveback(musb_ep, request, 0);
+}
+
+/*
+ * Data ready for a request; called from IRQ
+ */
+void musb_g_rx(struct musb *musb, u8 epnum)
+{
+        u16                     csr;
+        struct usb_request      *request;
+        void __iomem            *mbase = musb->mregs;
+        struct musb_ep          *musb_ep = &musb->endpoints[epnum].ep_out;
+        void __iomem            *epio = musb->endpoints[epnum].regs;
+        struct dma_channel      *dma;
+
+        musb_ep_select(mbase, epnum);
+
+        request = next_request(musb_ep);
+
+        csr = musb_readw(epio, MUSB_RXCSR);
+        dma = is_dma_capable() ? musb_ep->dma : NULL;
+
+        DBG(4, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
+                        csr, dma ? " (dma)" : "", request);
+
+        if (csr & MUSB_RXCSR_P_SENTSTALL) {
+                if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+                        dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+                        (void) musb->dma_controller->channel_abort(dma);
+                        request->actual += musb_ep->dma->actual_len;
+                }
+
+                csr |= MUSB_RXCSR_P_WZC_BITS;
+                csr &= ~MUSB_RXCSR_P_SENTSTALL;
+                musb_writew(epio, MUSB_RXCSR, csr);
+
+                if (request)
+                        musb_g_giveback(musb_ep, request, -EPIPE);
+                goto done;
+        }
+
+        if (csr & MUSB_RXCSR_P_OVERRUN) {
+                /* csr |= MUSB_RXCSR_P_WZC_BITS; */
+                csr &= ~MUSB_RXCSR_P_OVERRUN;
+                musb_writew(epio, MUSB_RXCSR, csr);
+
+                DBG(3, "%s iso overrun on %p\n", musb_ep->name, request);
+                if (request && request->status == -EINPROGRESS)
+                        request->status = -EOVERFLOW;
+        }
+        if (csr & MUSB_RXCSR_INCOMPRX) {
+                /* REVISIT not necessarily an error */
+                DBG(4, "%s, incomprx\n", musb_ep->end_point.name);
+        }
+
+        if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+                /* "should not happen"; likely RXPKTRDY pending for DMA */
+                DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1,
+                        "%s busy, csr %04x\n",
+                        musb_ep->end_point.name, csr);
+                goto done;
+        }
+
+        if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
+                csr &= ~(MUSB_RXCSR_AUTOCLEAR
+                                | MUSB_RXCSR_DMAENAB
+                                | MUSB_RXCSR_DMAMODE);
+                musb_writew(epio, MUSB_RXCSR,
+                        MUSB_RXCSR_P_WZC_BITS | csr);
+
+                request->actual += musb_ep->dma->actual_len;
+
+                DBG(4, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
+                        epnum, csr,
+                        musb_readw(epio, MUSB_RXCSR),
+                        musb_ep->dma->actual_len, request);
+
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
+                /* Autoclear doesn't clear RxPktRdy for short packets */
+                if ((dma->desired_mode == 0)
+                                || (dma->actual_len
+                                        & (musb_ep->packet_sz - 1))) {
+                        /* ack the read! */
+                        csr &= ~MUSB_RXCSR_RXPKTRDY;
+                        musb_writew(epio, MUSB_RXCSR, csr);
+                }
+
+                /* incomplete, and not short? wait for next IN packet */
+                if ((request->actual < request->length)
+                                && (musb_ep->dma->actual_len
+                                        == musb_ep->packet_sz))
+                        goto done;
+#endif
+                musb_g_giveback(musb_ep, request, 0);
+
+                request = next_request(musb_ep);
+                if (!request)
+                        goto done;
+
+                /* don't start more i/o till the stall clears */
+                musb_ep_select(mbase, epnum);
+                csr = musb_readw(epio, MUSB_RXCSR);
+                if (csr & MUSB_RXCSR_P_SENDSTALL)
+                        goto done;
+        }
+
+
+        /* analyze request if the ep is hot */
+        if (request)
+                rxstate(musb, to_musb_request(request));
+        else
+                DBG(3, "packet waiting for %s%s request\n",
+                                musb_ep->desc ? "" : "inactive ",
+                                musb_ep->end_point.name);
+
+done:
+        return;
+}
+
+/* ------------------------------------------------------------ */
+
+static int musb_gadget_enable(struct usb_ep *ep,
+                        const struct usb_endpoint_descriptor *desc)
+{
+        unsigned long           flags;
+        struct musb_ep          *musb_ep;
+        struct musb_hw_ep       *hw_ep;
+        void __iomem            *regs;
+        struct musb             *musb;
+        void __iomem    *mbase;
+        u8              epnum;
+        u16             csr;
+        unsigned        tmp;
+        int             status = -EINVAL;
+
+        if (!ep || !desc)
+                return -EINVAL;
+
+        musb_ep = to_musb_ep(ep);
+        hw_ep = musb_ep->hw_ep;
+        regs = hw_ep->regs;
+        musb = musb_ep->musb;
+        mbase = musb->mregs;
+        epnum = musb_ep->current_epnum;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        if (musb_ep->desc) {
+                status = -EBUSY;
+                goto fail;
+        }
+        musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+        /* check direction and (later) maxpacket size against endpoint */
+        if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+                goto fail;
+
+        /* REVISIT this rules out high bandwidth periodic transfers */
+        tmp = le16_to_cpu(desc->wMaxPacketSize);
+        if (tmp & ~0x07ff)
+                goto fail;
+        musb_ep->packet_sz = tmp;
+
+        /* enable the interrupts for the endpoint, set the endpoint
+         * packet size (or fail), set the mode, clear the fifo
+         */
+        musb_ep_select(mbase, epnum);
+        if (desc->bEndpointAddress & USB_DIR_IN) {
+                u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
+
+                if (hw_ep->is_shared_fifo)
+                        musb_ep->is_in = 1;
+                if (!musb_ep->is_in)
+                        goto fail;
+                if (tmp > hw_ep->max_packet_sz_tx)
+                        goto fail;
+
+                int_txe |= (1 << epnum);
+                musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+                /* REVISIT if can_bulk_split(), use by updating "tmp";
+                 * likewise high bandwidth periodic tx
+                 */
+                musb_writew(regs, MUSB_TXMAXP, tmp);
+
+                csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
+                if (musb_readw(regs, MUSB_TXCSR)
+                                & MUSB_TXCSR_FIFONOTEMPTY)
+                        csr |= MUSB_TXCSR_FLUSHFIFO;
+                if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+                        csr |= MUSB_TXCSR_P_ISO;
+
+                /* set twice in case of double buffering */
+                musb_writew(regs, MUSB_TXCSR, csr);
+                /* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+                musb_writew(regs, MUSB_TXCSR, csr);
+
+        } else {
+                u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE);
+
+                if (hw_ep->is_shared_fifo)
+                        musb_ep->is_in = 0;
+                if (musb_ep->is_in)
+                        goto fail;
+                if (tmp > hw_ep->max_packet_sz_rx)
+                        goto fail;
+
+                int_rxe |= (1 << epnum);
+                musb_writew(mbase, MUSB_INTRRXE, int_rxe);
+
+                /* REVISIT if can_bulk_combine() use by updating "tmp"
+                 * likewise high bandwidth periodic rx
+                 */
+                musb_writew(regs, MUSB_RXMAXP, tmp);
+
+                /* force shared fifo to OUT-only mode */
+                if (hw_ep->is_shared_fifo) {
+                        csr = musb_readw(regs, MUSB_TXCSR);
+                        csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
+                        musb_writew(regs, MUSB_TXCSR, csr);
+                }
+
+                csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG;
+                if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+                        csr |= MUSB_RXCSR_P_ISO;
+                else if (musb_ep->type == USB_ENDPOINT_XFER_INT)
+                        csr |= MUSB_RXCSR_DISNYET;
+
+                /* set twice in case of double buffering */
+                musb_writew(regs, MUSB_RXCSR, csr);
+                musb_writew(regs, MUSB_RXCSR, csr);
+        }
+
+        /* NOTE:  all the I/O code _should_ work fine without DMA, in case
+         * for some reason you run out of channels here.
+         */
+        if (is_dma_capable() && musb->dma_controller) {
+                struct dma_controller   *c = musb->dma_controller;
+
+                musb_ep->dma = c->channel_alloc(c, hw_ep,
+                                (desc->bEndpointAddress & USB_DIR_IN));
+        } else
+                musb_ep->dma = NULL;
+
+        musb_ep->desc = desc;
+        musb_ep->busy = 0;
+        status = 0;
+
+        pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n",
+                        musb_driver_name, musb_ep->end_point.name,
+                        ({ char *s; switch (musb_ep->type) {
+                        case USB_ENDPOINT_XFER_BULK:    s = "bulk"; break;
+                        case USB_ENDPOINT_XFER_INT:     s = "int"; break;
+                        default:                        s = "iso"; break;
+                        }; s; }),
+                        musb_ep->is_in ? "IN" : "OUT",
+                        musb_ep->dma ? "dma, " : "",
+                        musb_ep->packet_sz);
+
+        schedule_work(&musb->irq_work);
+
+fail:
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return status;
+}
+
+/*
+ * Disable an endpoint flushing all requests queued.
+ */
+static int musb_gadget_disable(struct usb_ep *ep)
+{
+        unsigned long   flags;
+        struct musb     *musb;
+        u8              epnum;
+        struct musb_ep  *musb_ep;
+        void __iomem    *epio;
+        int             status = 0;
+
+        musb_ep = to_musb_ep(ep);
+        musb = musb_ep->musb;
+        epnum = musb_ep->current_epnum;
+        epio = musb->endpoints[epnum].regs;
+
+        spin_lock_irqsave(&musb->lock, flags);
+        musb_ep_select(musb->mregs, epnum);
+
+        /* zero the endpoint sizes */
+        if (musb_ep->is_in) {
+                u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE);
+                int_txe &= ~(1 << epnum);
+                musb_writew(musb->mregs, MUSB_INTRTXE, int_txe);
+                musb_writew(epio, MUSB_TXMAXP, 0);
+        } else {
+                u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE);
+                int_rxe &= ~(1 << epnum);
+                musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe);
+                musb_writew(epio, MUSB_RXMAXP, 0);
+        }
+
+        musb_ep->desc = NULL;
+
+        /* abort all pending DMA and requests */
+        nuke(musb_ep, -ESHUTDOWN);
+
+        schedule_work(&musb->irq_work);
+
+        spin_unlock_irqrestore(&(musb->lock), flags);
+
+        DBG(2, "%s\n", musb_ep->end_point.name);
+
+        return status;
+}
+
+/*
+ * Allocate a request for an endpoint.
+ * Reused by ep0 code.
+ */
+struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+        struct musb_ep          *musb_ep = to_musb_ep(ep);
+        struct musb_request     *request = NULL;
+
+        request = kzalloc(sizeof *request, gfp_flags);
+        if (request) {
+                INIT_LIST_HEAD(&request->request.list);
+                request->request.dma = DMA_ADDR_INVALID;
+                request->epnum = musb_ep->current_epnum;
+                request->ep = musb_ep;
+        }
+
+        return &request->request;
+}
+
+/*
+ * Free a request
+ * Reused by ep0 code.
+ */
+void musb_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+        kfree(to_musb_request(req));
+}
+
+static LIST_HEAD(buffers);
+
+struct free_record {
+        struct list_head        list;
+        struct device           *dev;
+        unsigned                bytes;
+        dma_addr_t              dma;
+};
+
+/*
+ * Context: controller locked, IRQs blocked.
+ */
+static void musb_ep_restart(struct musb *musb, struct musb_request *req)
+{
+        DBG(3, "<== %s request %p len %u on hw_ep%d\n",
+                req->tx ? "TX/IN" : "RX/OUT",
+                &req->request, req->request.length, req->epnum);
+
+        musb_ep_select(musb->mregs, req->epnum);
+        if (req->tx)
+                txstate(musb, req);
+        else
+                rxstate(musb, req);
+}
+
+static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
+                        gfp_t gfp_flags)
+{
+        struct musb_ep          *musb_ep;
+        struct musb_request     *request;
+        struct musb             *musb;
+        int                     status = 0;
+        unsigned long           lockflags;
+
+        if (!ep || !req)
+                return -EINVAL;
+        if (!req->buf)
+                return -ENODATA;
+
+        musb_ep = to_musb_ep(ep);
+        musb = musb_ep->musb;
+
+        request = to_musb_request(req);
+        request->musb = musb;
+
+        if (request->ep != musb_ep)
+                return -EINVAL;
+
+        DBG(4, "<== to %s request=%p\n", ep->name, req);
+
+        /* request is mine now... */
+        request->request.actual = 0;
+        request->request.status = -EINPROGRESS;
+        request->epnum = musb_ep->current_epnum;
+        request->tx = musb_ep->is_in;
+
+        if (is_dma_capable() && musb_ep->dma) {
+                if (request->request.dma == DMA_ADDR_INVALID) {
+                        request->request.dma = dma_map_single(
+                                        musb->controller,
+                                        request->request.buf,
+                                        request->request.length,
+                                        request->tx
+                                                ? DMA_TO_DEVICE
+                                                : DMA_FROM_DEVICE);
+                        request->mapped = 1;
+                } else {
+                        dma_sync_single_for_device(musb->controller,
+                                        request->request.dma,
+                                        request->request.length,
+                                        request->tx
+                                                ? DMA_TO_DEVICE
+                                                : DMA_FROM_DEVICE);
+                        request->mapped = 0;
+                }
+        } else if (!req->buf) {
+                return -ENODATA;
+        } else
+                request->mapped = 0;
+
+        spin_lock_irqsave(&musb->lock, lockflags);
+
+        /* don't queue if the ep is down */
+        if (!musb_ep->desc) {
+                DBG(4, "req %p queued to %s while ep %s\n",
+                                req, ep->name, "disabled");
+                status = -ESHUTDOWN;
+                goto cleanup;
+        }
+
+        /* add request to the list */
+        list_add_tail(&(request->request.list), &(musb_ep->req_list));
+
+        /* it this is the head of the queue, start i/o ... */
+        if (!musb_ep->busy && &request->request.list == musb_ep->req_list.next)
+                musb_ep_restart(musb, request);
+
+cleanup:
+        spin_unlock_irqrestore(&musb->lock, lockflags);
+        return status;
+}
+
+static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
+{
+        struct musb_ep          *musb_ep = to_musb_ep(ep);
+        struct usb_request      *r;
+        unsigned long           flags;
+        int                     status = 0;
+        struct musb             *musb = musb_ep->musb;
+
+        if (!ep || !request || to_musb_request(request)->ep != musb_ep)
+                return -EINVAL;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        list_for_each_entry(r, &musb_ep->req_list, list) {
+                if (r == request)
+                        break;
+        }
+        if (r != request) {
+                DBG(3, "request %p not queued to %s\n", request, ep->name);
+                status = -EINVAL;
+                goto done;
+        }
+
+        /* if the hardware doesn't have the request, easy ... */
+        if (musb_ep->req_list.next != &request->list || musb_ep->busy)
+                musb_g_giveback(musb_ep, request, -ECONNRESET);
+
+        /* ... else abort the dma transfer ... */
+        else if (is_dma_capable() && musb_ep->dma) {
+                struct dma_controller   *c = musb->dma_controller;
+
+                musb_ep_select(musb->mregs, musb_ep->current_epnum);
+                if (c->channel_abort)
+                        status = c->channel_abort(musb_ep->dma);
+                else
+                        status = -EBUSY;
+                if (status == 0)
+                        musb_g_giveback(musb_ep, request, -ECONNRESET);
+        } else {
+                /* NOTE: by sticking to easily tested hardware/driver states,
+                 * we leave counting of in-flight packets imprecise.
+                 */
+                musb_g_giveback(musb_ep, request, -ECONNRESET);
+        }
+
+done:
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return status;
+}
+
+/*
+ * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
+ * data but will queue requests.
+ *
+ * exported to ep0 code
+ */
+int musb_gadget_set_halt(struct usb_ep *ep, int value)
+{
+        struct musb_ep          *musb_ep = to_musb_ep(ep);
+        u8                      epnum = musb_ep->current_epnum;
+        struct musb             *musb = musb_ep->musb;
+        void __iomem            *epio = musb->endpoints[epnum].regs;
+        void __iomem            *mbase;
+        unsigned long           flags;
+        u16                     csr;
+        struct musb_request     *request = NULL;
+        int                     status = 0;
+
+        if (!ep)
+                return -EINVAL;
+        mbase = musb->mregs;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) {
+                status = -EINVAL;
+                goto done;
+        }
+
+        musb_ep_select(mbase, epnum);
+
+        /* cannot portably stall with non-empty FIFO */
+        request = to_musb_request(next_request(musb_ep));
+        if (value && musb_ep->is_in) {
+                csr = musb_readw(epio, MUSB_TXCSR);
+                if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+                        DBG(3, "%s fifo busy, cannot halt\n", ep->name);
+                        spin_unlock_irqrestore(&musb->lock, flags);
+                        return -EAGAIN;
+                }
+
+        }
+
+        /* set/clear the stall and toggle bits */
+        DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear");
+        if (musb_ep->is_in) {
+                csr = musb_readw(epio, MUSB_TXCSR);
+                if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+                        csr |= MUSB_TXCSR_FLUSHFIFO;
+                csr |= MUSB_TXCSR_P_WZC_BITS
+                        | MUSB_TXCSR_CLRDATATOG;
+                if (value)
+                        csr |= MUSB_TXCSR_P_SENDSTALL;
+                else
+                        csr &= ~(MUSB_TXCSR_P_SENDSTALL
+                                | MUSB_TXCSR_P_SENTSTALL);
+                csr &= ~MUSB_TXCSR_TXPKTRDY;
+                musb_writew(epio, MUSB_TXCSR, csr);
+        } else {
+                csr = musb_readw(epio, MUSB_RXCSR);
+                csr |= MUSB_RXCSR_P_WZC_BITS
+                        | MUSB_RXCSR_FLUSHFIFO
+                        | MUSB_RXCSR_CLRDATATOG;
+                if (value)
+                        csr |= MUSB_RXCSR_P_SENDSTALL;
+                else
+                        csr &= ~(MUSB_RXCSR_P_SENDSTALL
+                                | MUSB_RXCSR_P_SENTSTALL);
+                musb_writew(epio, MUSB_RXCSR, csr);
+        }
+
+done:
+
+        /* maybe start the first request in the queue */
+        if (!musb_ep->busy && !value && request) {
+                DBG(3, "restarting the request\n");
+                musb_ep_restart(musb, request);
+        }
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return status;
+}
+
+static int musb_gadget_fifo_status(struct usb_ep *ep)
+{
+        struct musb_ep          *musb_ep = to_musb_ep(ep);
+        void __iomem            *epio = musb_ep->hw_ep->regs;
+        int                     retval = -EINVAL;
+
+        if (musb_ep->desc && !musb_ep->is_in) {
+                struct musb             *musb = musb_ep->musb;
+                int                     epnum = musb_ep->current_epnum;
+                void __iomem            *mbase = musb->mregs;
+                unsigned long           flags;
+
+                spin_lock_irqsave(&musb->lock, flags);
+
+                musb_ep_select(mbase, epnum);
+                /* FIXME return zero unless RXPKTRDY is set */
+                retval = musb_readw(epio, MUSB_RXCOUNT);
+
+                spin_unlock_irqrestore(&musb->lock, flags);
+        }
+        return retval;
+}
+
+static void musb_gadget_fifo_flush(struct usb_ep *ep)
+{
+        struct musb_ep  *musb_ep = to_musb_ep(ep);
+        struct musb     *musb = musb_ep->musb;
+        u8              epnum = musb_ep->current_epnum;
+        void __iomem    *epio = musb->endpoints[epnum].regs;
+        void __iomem    *mbase;
+        unsigned long   flags;
+        u16             csr, int_txe;
+
+        mbase = musb->mregs;
+
+        spin_lock_irqsave(&musb->lock, flags);
+        musb_ep_select(mbase, (u8) epnum);
+
+        /* disable interrupts */
+        int_txe = musb_readw(mbase, MUSB_INTRTXE);
+        musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+        if (musb_ep->is_in) {
+                csr = musb_readw(epio, MUSB_TXCSR);
+                if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+                        csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+                        musb_writew(epio, MUSB_TXCSR, csr);
+                        /* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+                        musb_writew(epio, MUSB_TXCSR, csr);
+                }
+        } else {
+                csr = musb_readw(epio, MUSB_RXCSR);
+                csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS;
+                musb_writew(epio, MUSB_RXCSR, csr);
+                musb_writew(epio, MUSB_RXCSR, csr);
+        }
+
+        /* re-enable interrupt */
+        musb_writew(mbase, MUSB_INTRTXE, int_txe);
+        spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static const struct usb_ep_ops musb_ep_ops = {
+        .enable         = musb_gadget_enable,
+        .disable        = musb_gadget_disable,
+        .alloc_request  = musb_alloc_request,
+        .free_request   = musb_free_request,
+        .queue          = musb_gadget_queue,
+        .dequeue        = musb_gadget_dequeue,
+        .set_halt       = musb_gadget_set_halt,
+        .fifo_status    = musb_gadget_fifo_status,
+        .fifo_flush     = musb_gadget_fifo_flush
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int musb_gadget_get_frame(struct usb_gadget *gadget)
+{
+        struct musb     *musb = gadget_to_musb(gadget);
+
+        return (int)musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_gadget_wakeup(struct usb_gadget *gadget)
+{
+        struct musb     *musb = gadget_to_musb(gadget);
+        void __iomem    *mregs = musb->mregs;
+        unsigned long   flags;
+        int             status = -EINVAL;
+        u8              power, devctl;
+        int             retries;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        switch (musb->xceiv.state) {
+        case OTG_STATE_B_PERIPHERAL:
+                /* NOTE:  OTG state machine doesn't include B_SUSPENDED;
+                 * that's part of the standard usb 1.1 state machine, and
+                 * doesn't affect OTG transitions.
+                 */
+                if (musb->may_wakeup && musb->is_suspended)
+                        break;
+                goto done;
+        case OTG_STATE_B_IDLE:
+                /* Start SRP ... OTG not required. */
+                devctl = musb_readb(mregs, MUSB_DEVCTL);
+                DBG(2, "Sending SRP: devctl: %02x\n", devctl);
+                devctl |= MUSB_DEVCTL_SESSION;
+                musb_writeb(mregs, MUSB_DEVCTL, devctl);
+                devctl = musb_readb(mregs, MUSB_DEVCTL);
+                retries = 100;
+                while (!(devctl & MUSB_DEVCTL_SESSION)) {
+                        devctl = musb_readb(mregs, MUSB_DEVCTL);
+                        if (retries-- < 1)
+                                break;
+                }
+                retries = 10000;
+                while (devctl & MUSB_DEVCTL_SESSION) {
+                        devctl = musb_readb(mregs, MUSB_DEVCTL);
+                        if (retries-- < 1)
+                                break;
+                }
+
+                /* Block idling for at least 1s */
+                musb_platform_try_idle(musb,
+                        jiffies + msecs_to_jiffies(1 * HZ));
+
+                status = 0;
+                goto done;
+        default:
+                DBG(2, "Unhandled wake: %s\n", otg_state_string(musb));
+                goto done;
+        }
+
+        status = 0;
+
+        power = musb_readb(mregs, MUSB_POWER);
+        power |= MUSB_POWER_RESUME;
+        musb_writeb(mregs, MUSB_POWER, power);
+        DBG(2, "issue wakeup\n");
+
+        /* FIXME do this next chunk in a timer callback, no udelay */
+        mdelay(2);
+
+        power = musb_readb(mregs, MUSB_POWER);
+        power &= ~MUSB_POWER_RESUME;
+        musb_writeb(mregs, MUSB_POWER, power);
+done:
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return status;
+}
+
+static int
+musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered)
+{
+        struct musb     *musb = gadget_to_musb(gadget);
+
+        musb->is_self_powered = !!is_selfpowered;
+        return 0;
+}
+
+static void musb_pullup(struct musb *musb, int is_on)
+{
+        u8 power;
+
+        power = musb_readb(musb->mregs, MUSB_POWER);
+        if (is_on)
+                power |= MUSB_POWER_SOFTCONN;
+        else
+                power &= ~MUSB_POWER_SOFTCONN;
+
+        /* FIXME if on, HdrcStart; if off, HdrcStop */
+
+        DBG(3, "gadget %s D+ pullup %s\n",
+                musb->gadget_driver->function, is_on ? "on" : "off");
+        musb_writeb(musb->mregs, MUSB_POWER, power);
+}
+
+#if 0
+static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+        DBG(2, "<= %s =>\n", __func__);
+
+        /*
+         * FIXME iff driver's softconnect flag is set (as it is during probe,
+         * though that can clear it), just musb_pullup().
+         */
+
+        return -EINVAL;
+}
+#endif
+
+static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+        struct musb     *musb = gadget_to_musb(gadget);
+
+        if (!musb->xceiv.set_power)
+                return -EOPNOTSUPP;
+        return otg_set_power(&musb->xceiv, mA);
+}
+
+static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+        struct musb     *musb = gadget_to_musb(gadget);
+        unsigned long   flags;
+
+        is_on = !!is_on;
+
+        /* NOTE: this assumes we are sensing vbus; we'd rather
+         * not pullup unless the B-session is active.
+         */
+        spin_lock_irqsave(&musb->lock, flags);
+        if (is_on != musb->softconnect) {
+                musb->softconnect = is_on;
+                musb_pullup(musb, is_on);
+        }
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return 0;
+}
+
+static const struct usb_gadget_ops musb_gadget_operations = {
+        .get_frame              = musb_gadget_get_frame,
+        .wakeup                 = musb_gadget_wakeup,
+        .set_selfpowered        = musb_gadget_set_self_powered,
+        /* .vbus_session                = musb_gadget_vbus_session, */
+        .vbus_draw              = musb_gadget_vbus_draw,
+        .pullup                 = musb_gadget_pullup,
+};
+
+/* ----------------------------------------------------------------------- */
+
+/* Registration */
+
+/* Only this registration code "knows" the rule (from USB standards)
+ * about there being only one external upstream port.  It assumes
+ * all peripheral ports are external...
+ */
+static struct musb *the_gadget;
+
+static void musb_gadget_release(struct device *dev)
+{
+        /* kref_put(WHAT) */
+        dev_dbg(dev, "%s\n", __func__);
+}
+
+
+static void __init
+init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
+{
+        struct musb_hw_ep       *hw_ep = musb->endpoints + epnum;
+
+        memset(ep, 0, sizeof *ep);
+
+        ep->current_epnum = epnum;
+        ep->musb = musb;
+        ep->hw_ep = hw_ep;
+        ep->is_in = is_in;
+
+        INIT_LIST_HEAD(&ep->req_list);
+
+        sprintf(ep->name, "ep%d%s", epnum,
+                        (!epnum || hw_ep->is_shared_fifo) ? "" : (
+                                is_in ? "in" : "out"));
+        ep->end_point.name = ep->name;
+        INIT_LIST_HEAD(&ep->end_point.ep_list);
+        if (!epnum) {
+                ep->end_point.maxpacket = 64;
+                ep->end_point.ops = &musb_g_ep0_ops;
+                musb->g.ep0 = &ep->end_point;
+        } else {
+                if (is_in)
+                        ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
+                else
+                        ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
+                ep->end_point.ops = &musb_ep_ops;
+                list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
+        }
+}
+
+/*
+ * Initialize the endpoints exposed to peripheral drivers, with backlinks
+ * to the rest of the driver state.
+ */
+static inline void __init musb_g_init_endpoints(struct musb *musb)
+{
+        u8                      epnum;
+        struct musb_hw_ep       *hw_ep;
+        unsigned                count = 0;
+
+        /* intialize endpoint list just once */
+        INIT_LIST_HEAD(&(musb->g.ep_list));
+
+        for (epnum = 0, hw_ep = musb->endpoints;
+                        epnum < musb->nr_endpoints;
+                        epnum++, hw_ep++) {
+                if (hw_ep->is_shared_fifo /* || !epnum */) {
+                        init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
+                        count++;
+                } else {
+                        if (hw_ep->max_packet_sz_tx) {
+                                init_peripheral_ep(musb, &hw_ep->ep_in,
+                                                        epnum, 1);
+                                count++;
+                        }
+                        if (hw_ep->max_packet_sz_rx) {
+                                init_peripheral_ep(musb, &hw_ep->ep_out,
+                                                        epnum, 0);
+                                count++;
+                        }
+                }
+        }
+}
+
+/* called once during driver setup to initialize and link into
+ * the driver model; memory is zeroed.
+ */
+int __init musb_gadget_setup(struct musb *musb)
+{
+        int status;
+
+        /* REVISIT minor race:  if (erroneously) setting up two
+         * musb peripherals at the same time, only the bus lock
+         * is probably held.
+         */
+        if (the_gadget)
+                return -EBUSY;
+        the_gadget = musb;
+
+        musb->g.ops = &musb_gadget_operations;
+        musb->g.is_dualspeed = 1;
+        musb->g.speed = USB_SPEED_UNKNOWN;
+
+        /* this "gadget" abstracts/virtualizes the controller */
+        strcpy(musb->g.dev.bus_id, "gadget");
+        musb->g.dev.parent = musb->controller;
+        musb->g.dev.dma_mask = musb->controller->dma_mask;
+        musb->g.dev.release = musb_gadget_release;
+        musb->g.name = musb_driver_name;
+
+        if (is_otg_enabled(musb))
+                musb->g.is_otg = 1;
+
+        musb_g_init_endpoints(musb);
+
+        musb->is_active = 0;
+        musb_platform_try_idle(musb, 0);
+
+        status = device_register(&musb->g.dev);
+        if (status != 0)
+                the_gadget = NULL;
+        return status;
+}
+
+void musb_gadget_cleanup(struct musb *musb)
+{
+        if (musb != the_gadget)
+                return;
+
+        device_unregister(&musb->g.dev);
+        the_gadget = NULL;
+}
+
+/*
+ * Register the gadget driver. Used by gadget drivers when
+ * registering themselves with the controller.
+ *
+ * -EINVAL something went wrong (not driver)
+ * -EBUSY another gadget is already using the controller
+ * -ENOMEM no memeory to perform the operation
+ *
+ * @param driver the gadget driver
+ * @return <0 if error, 0 if everything is fine
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+        int retval;
+        unsigned long flags;
+        struct musb *musb = the_gadget;
+
+        if (!driver
+                        || driver->speed != USB_SPEED_HIGH
+                        || !driver->bind
+                        || !driver->setup)
+                return -EINVAL;
+
+        /* driver must be initialized to support peripheral mode */
+        if (!musb || !(musb->board_mode == MUSB_OTG
+                                || musb->board_mode != MUSB_OTG)) {
+                DBG(1, "%s, no dev??\n", __func__);
+                return -ENODEV;
+        }
+
+        DBG(3, "registering driver %s\n", driver->function);
+        spin_lock_irqsave(&musb->lock, flags);
+
+        if (musb->gadget_driver) {
+                DBG(1, "%s is already bound to %s\n",
+                                musb_driver_name,
+                                musb->gadget_driver->driver.name);
+                retval = -EBUSY;
+        } else {
+                musb->gadget_driver = driver;
+                musb->g.dev.driver = &driver->driver;
+                driver->driver.bus = NULL;
+                musb->softconnect = 1;
+                retval = 0;
+        }
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        if (retval == 0) {
+                retval = driver->bind(&musb->g);
+                if (retval != 0) {
+                        DBG(3, "bind to driver %s failed --> %d\n",
+                                        driver->driver.name, retval);
+                        musb->gadget_driver = NULL;
+                        musb->g.dev.driver = NULL;
+                }
+
+                spin_lock_irqsave(&musb->lock, flags);
+
+                /* REVISIT always use otg_set_peripheral(), handling
+                 * issues including the root hub one below ...
+                 */
+                musb->xceiv.gadget = &musb->g;
+                musb->xceiv.state = OTG_STATE_B_IDLE;
+                musb->is_active = 1;
+
+                /* FIXME this ignores the softconnect flag.  Drivers are
+                 * allowed hold the peripheral inactive until for example
+                 * userspace hooks up printer hardware or DSP codecs, so
+                 * hosts only see fully functional devices.
+                 */
+
+                if (!is_otg_enabled(musb))
+                        musb_start(musb);
+
+                spin_unlock_irqrestore(&musb->lock, flags);
+
+                if (is_otg_enabled(musb)) {
+                        DBG(3, "OTG startup...\n");
+
+                        /* REVISIT:  funcall to other code, which also
+                         * handles power budgeting ... this way also
+                         * ensures HdrcStart is indirectly called.
+                         */
+                        retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+                        if (retval < 0) {
+                                DBG(1, "add_hcd failed, %d\n", retval);
+                                spin_lock_irqsave(&musb->lock, flags);
+                                musb->xceiv.gadget = NULL;
+                                musb->xceiv.state = OTG_STATE_UNDEFINED;
+                                musb->gadget_driver = NULL;
+                                musb->g.dev.driver = NULL;
+                                spin_unlock_irqrestore(&musb->lock, flags);
+                        }
+                }
+        }
+
+        return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
+{
+        int                     i;
+        struct musb_hw_ep       *hw_ep;
+
+        /* don't disconnect if it's not connected */
+        if (musb->g.speed == USB_SPEED_UNKNOWN)
+                driver = NULL;
+        else
+                musb->g.speed = USB_SPEED_UNKNOWN;
+
+        /* deactivate the hardware */
+        if (musb->softconnect) {
+                musb->softconnect = 0;
+                musb_pullup(musb, 0);
+        }
+        musb_stop(musb);
+
+        /* killing any outstanding requests will quiesce the driver;
+         * then report disconnect
+         */
+        if (driver) {
+                for (i = 0, hw_ep = musb->endpoints;
+                                i < musb->nr_endpoints;
+                                i++, hw_ep++) {
+                        musb_ep_select(musb->mregs, i);
+                        if (hw_ep->is_shared_fifo /* || !epnum */) {
+                                nuke(&hw_ep->ep_in, -ESHUTDOWN);
+                        } else {
+                                if (hw_ep->max_packet_sz_tx)
+                                        nuke(&hw_ep->ep_in, -ESHUTDOWN);
+                                if (hw_ep->max_packet_sz_rx)
+                                        nuke(&hw_ep->ep_out, -ESHUTDOWN);
+                        }
+                }
+
+                spin_unlock(&musb->lock);
+                driver->disconnect(&musb->g);
+                spin_lock(&musb->lock);
+        }
+}
+
+/*
+ * Unregister the gadget driver. Used by gadget drivers when
+ * unregistering themselves from the controller.
+ *
+ * @param driver the gadget driver to unregister
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+        unsigned long   flags;
+        int             retval = 0;
+        struct musb     *musb = the_gadget;
+
+        if (!driver || !driver->unbind || !musb)
+                return -EINVAL;
+
+        /* REVISIT always use otg_set_peripheral() here too;
+         * this needs to shut down the OTG engine.
+         */
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+#ifdef  CONFIG_USB_MUSB_OTG
+        musb_hnp_stop(musb);
+#endif
+
+        if (musb->gadget_driver == driver) {
+
+                (void) musb_gadget_vbus_draw(&musb->g, 0);
+
+                musb->xceiv.state = OTG_STATE_UNDEFINED;
+                stop_activity(musb, driver);
+
+                DBG(3, "unregistering driver %s\n", driver->function);
+                spin_unlock_irqrestore(&musb->lock, flags);
+                driver->unbind(&musb->g);
+                spin_lock_irqsave(&musb->lock, flags);
+
+                musb->gadget_driver = NULL;
+                musb->g.dev.driver = NULL;
+
+                musb->is_active = 0;
+                musb_platform_try_idle(musb, 0);
+        } else
+                retval = -EINVAL;
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        if (is_otg_enabled(musb) && retval == 0) {
+                usb_remove_hcd(musb_to_hcd(musb));
+                /* FIXME we need to be able to register another
+                 * gadget driver here and have everything work;
+                 * that currently misbehaves.
+                 */
+        }
+
+        return retval;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/* ----------------------------------------------------------------------- */
+
+/* lifecycle operations called through plat_uds.c */
+
+void musb_g_resume(struct musb *musb)
+{
+        musb->is_suspended = 0;
+        switch (musb->xceiv.state) {
+        case OTG_STATE_B_IDLE:
+                break;
+        case OTG_STATE_B_WAIT_ACON:
+        case OTG_STATE_B_PERIPHERAL:
+                musb->is_active = 1;
+                if (musb->gadget_driver && musb->gadget_driver->resume) {
+                        spin_unlock(&musb->lock);
+                        musb->gadget_driver->resume(&musb->g);
+                        spin_lock(&musb->lock);
+                }
+                break;
+        default:
+                WARNING("unhandled RESUME transition (%s)\n",
+                                otg_state_string(musb));
+        }
+}
+
+/* called when SOF packets stop for 3+ msec */
+void musb_g_suspend(struct musb *musb)
+{
+        u8      devctl;
+
+        devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+        DBG(3, "devctl %02x\n", devctl);
+
+        switch (musb->xceiv.state) {
+        case OTG_STATE_B_IDLE:
+                if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+                        musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+                break;
+        case OTG_STATE_B_PERIPHERAL:
+                musb->is_suspended = 1;
+                if (musb->gadget_driver && musb->gadget_driver->suspend) {
+                        spin_unlock(&musb->lock);
+                        musb->gadget_driver->suspend(&musb->g);
+                        spin_lock(&musb->lock);
+                }
+                break;
+        default:
+                /* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
+                 * A_PERIPHERAL may need care too
+                 */
+                WARNING("unhandled SUSPEND transition (%s)\n",
+                                otg_state_string(musb));
+        }
+}
+
+/* Called during SRP */
+void musb_g_wakeup(struct musb *musb)
+{
+        musb_gadget_wakeup(&musb->g);
+}
+
+/* called when VBUS drops below session threshold, and in other cases */
+void musb_g_disconnect(struct musb *musb)
+{
+        void __iomem    *mregs = musb->mregs;
+        u8      devctl = musb_readb(mregs, MUSB_DEVCTL);
+
+        DBG(3, "devctl %02x\n", devctl);
+
+        /* clear HR */
+        musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
+
+        /* don't draw vbus until new b-default session */
+        (void) musb_gadget_vbus_draw(&musb->g, 0);
+
+        musb->g.speed = USB_SPEED_UNKNOWN;
+        if (musb->gadget_driver && musb->gadget_driver->disconnect) {
+                spin_unlock(&musb->lock);
+                musb->gadget_driver->disconnect(&musb->g);
+                spin_lock(&musb->lock);
+        }
+
+        switch (musb->xceiv.state) {
+        default:
+#ifdef  CONFIG_USB_MUSB_OTG
+                DBG(2, "Unhandled disconnect %s, setting a_idle\n",
+                        otg_state_string(musb));
+                musb->xceiv.state = OTG_STATE_A_IDLE;
+                break;
+        case OTG_STATE_A_PERIPHERAL:
+                musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+                break;
+        case OTG_STATE_B_WAIT_ACON:
+        case OTG_STATE_B_HOST:
+#endif
+        case OTG_STATE_B_PERIPHERAL:
+        case OTG_STATE_B_IDLE:
+                musb->xceiv.state = OTG_STATE_B_IDLE;
+                break;
+        case OTG_STATE_B_SRP_INIT:
+                break;
+        }
+
+        musb->is_active = 0;
+}
+
+void musb_g_reset(struct musb *musb)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+        void __iomem    *mbase = musb->mregs;
+        u8              devctl = musb_readb(mbase, MUSB_DEVCTL);
+        u8              power;
+
+        DBG(3, "<== %s addr=%x driver '%s'\n",
+                        (devctl & MUSB_DEVCTL_BDEVICE)
+                                ? "B-Device" : "A-Device",
+                        musb_readb(mbase, MUSB_FADDR),
+                        musb->gadget_driver
+                                ? musb->gadget_driver->driver.name
+                                : NULL
+                        );
+
+        /* report disconnect, if we didn't already (flushing EP state) */
+        if (musb->g.speed != USB_SPEED_UNKNOWN)
+                musb_g_disconnect(musb);
+
+        /* clear HR */
+        else if (devctl & MUSB_DEVCTL_HR)
+                musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+
+
+        /* what speed did we negotiate? */
+        power = musb_readb(mbase, MUSB_POWER);
+        musb->g.speed = (power & MUSB_POWER_HSMODE)
+                        ? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+        /* start in USB_STATE_DEFAULT */
+        musb->is_active = 1;
+        musb->is_suspended = 0;
+        MUSB_DEV_MODE(musb);
+        musb->address = 0;
+        musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+
+        musb->may_wakeup = 0;
+        musb->g.b_hnp_enable = 0;
+        musb->g.a_alt_hnp_support = 0;
+        musb->g.a_hnp_support = 0;
+
+        /* Normal reset, as B-Device;
+         * or else after HNP, as A-Device
+         */
+        if (devctl & MUSB_DEVCTL_BDEVICE) {
+                musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+                musb->g.is_a_peripheral = 0;
+        } else if (is_otg_enabled(musb)) {
+                musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+                musb->g.is_a_peripheral = 1;
+        } else
+                WARN_ON(1);
+
+        /* start with default limits on VBUS power draw */
+        (void) musb_gadget_vbus_draw(&musb->g,
+                        is_otg_enabled(musb) ? 8 : 100);
+}
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
new file mode 100644
index 000000000000..59502da9f739
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.h
@@ -0,0 +1,108 @@
+/*
+ * MUSB OTG driver peripheral defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_GADGET_H
+#define __MUSB_GADGET_H
+
+struct musb_request {
+        struct usb_request      request;
+        struct musb_ep          *ep;
+        struct musb             *musb;
+        u8 tx;                  /* endpoint direction */
+        u8 epnum;
+        u8 mapped;
+};
+
+static inline struct musb_request *to_musb_request(struct usb_request *req)
+{
+        return req ? container_of(req, struct musb_request, request) : NULL;
+}
+
+extern struct usb_request *
+musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+extern void musb_free_request(struct usb_ep *ep, struct usb_request *req);
+
+
+/*
+ * struct musb_ep - peripheral side view of endpoint rx or tx side
+ */
+struct musb_ep {
+        /* stuff towards the head is basically write-once. */
+        struct usb_ep                   end_point;
+        char                            name[12];
+        struct musb_hw_ep               *hw_ep;
+        struct musb                     *musb;
+        u8                              current_epnum;
+
+        /* ... when enabled/disabled ... */
+        u8                              type;
+        u8                              is_in;
+        u16                             packet_sz;
+        const struct usb_endpoint_descriptor    *desc;
+        struct dma_channel              *dma;
+
+        /* later things are modified based on usage */
+        struct list_head                req_list;
+
+        /* true if lock must be dropped but req_list may not be advanced */
+        u8                              busy;
+};
+
+static inline struct musb_ep *to_musb_ep(struct usb_ep *ep)
+{
+        return ep ? container_of(ep, struct musb_ep, end_point) : NULL;
+}
+
+static inline struct usb_request *next_request(struct musb_ep *ep)
+{
+        struct list_head        *queue = &ep->req_list;
+
+        if (list_empty(queue))
+                return NULL;
+        return container_of(queue->next, struct usb_request, list);
+}
+
+extern void musb_g_tx(struct musb *musb, u8 epnum);
+extern void musb_g_rx(struct musb *musb, u8 epnum);
+
+extern const struct usb_ep_ops musb_g_ep0_ops;
+
+extern int musb_gadget_setup(struct musb *);
+extern void musb_gadget_cleanup(struct musb *);
+
+extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
+
+extern int musb_gadget_set_halt(struct usb_ep *ep, int value);
+
+#endif          /* __MUSB_GADGET_H */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
new file mode 100644
index 000000000000..48d7d3ccb243
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -0,0 +1,981 @@
+/*
+ * MUSB OTG peripheral driver ep0 handling
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include "musb_core.h"
+
+/* ep0 is always musb->endpoints[0].ep_in */
+#define next_ep0_request(musb)  next_in_request(&(musb)->endpoints[0])
+
+/*
+ * locking note:  we use only the controller lock, for simpler correctness.
+ * It's always held with IRQs blocked.
+ *
+ * It protects the ep0 request queue as well as ep0_state, not just the
+ * controller and indexed registers.  And that lock stays held unless it
+ * needs to be dropped to allow reentering this driver ... like upcalls to
+ * the gadget driver, or adjusting endpoint halt status.
+ */
+
+static char *decode_ep0stage(u8 stage)
+{
+        switch (stage) {
+        case MUSB_EP0_STAGE_SETUP:      return "idle";
+        case MUSB_EP0_STAGE_TX:         return "in";
+        case MUSB_EP0_STAGE_RX:         return "out";
+        case MUSB_EP0_STAGE_ACKWAIT:    return "wait";
+        case MUSB_EP0_STAGE_STATUSIN:   return "in/status";
+        case MUSB_EP0_STAGE_STATUSOUT:  return "out/status";
+        default:                        return "?";
+        }
+}
+
+/* handle a standard GET_STATUS request
+ * Context:  caller holds controller lock
+ */
+static int service_tx_status_request(
+        struct musb *musb,
+        const struct usb_ctrlrequest *ctrlrequest)
+{
+        void __iomem    *mbase = musb->mregs;
+        int handled = 1;
+        u8 result[2], epnum = 0;
+        const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+        result[1] = 0;
+
+        switch (recip) {
+        case USB_RECIP_DEVICE:
+                result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
+                result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+#ifdef CONFIG_USB_MUSB_OTG
+                if (musb->g.is_otg) {
+                        result[0] |= musb->g.b_hnp_enable
+                                << USB_DEVICE_B_HNP_ENABLE;
+                        result[0] |= musb->g.a_alt_hnp_support
+                                << USB_DEVICE_A_ALT_HNP_SUPPORT;
+                        result[0] |= musb->g.a_hnp_support
+                                << USB_DEVICE_A_HNP_SUPPORT;
+                }
+#endif
+                break;
+
+        case USB_RECIP_INTERFACE:
+                result[0] = 0;
+                break;
+
+        case USB_RECIP_ENDPOINT: {
+                int             is_in;
+                struct musb_ep  *ep;
+                u16             tmp;
+                void __iomem    *regs;
+
+                epnum = (u8) ctrlrequest->wIndex;
+                if (!epnum) {
+                        result[0] = 0;
+                        break;
+                }
+
+                is_in = epnum & USB_DIR_IN;
+                if (is_in) {
+                        epnum &= 0x0f;
+                        ep = &musb->endpoints[epnum].ep_in;
+                } else {
+                        ep = &musb->endpoints[epnum].ep_out;
+                }
+                regs = musb->endpoints[epnum].regs;
+
+                if (epnum >= MUSB_C_NUM_EPS || !ep->desc) {
+                        handled = -EINVAL;
+                        break;
+                }
+
+                musb_ep_select(mbase, epnum);
+                if (is_in)
+                        tmp = musb_readw(regs, MUSB_TXCSR)
+                                                & MUSB_TXCSR_P_SENDSTALL;
+                else
+                        tmp = musb_readw(regs, MUSB_RXCSR)
+                                                & MUSB_RXCSR_P_SENDSTALL;
+                musb_ep_select(mbase, 0);
+
+                result[0] = tmp ? 1 : 0;
+                } break;
+
+        default:
+                /* class, vendor, etc ... delegate */
+                handled = 0;
+                break;
+        }
+
+        /* fill up the fifo; caller updates csr0 */
+        if (handled > 0) {
+                u16     len = le16_to_cpu(ctrlrequest->wLength);
+
+                if (len > 2)
+                        len = 2;
+                musb_write_fifo(&musb->endpoints[0], len, result);
+        }
+
+        return handled;
+}
+
+/*
+ * handle a control-IN request, the end0 buffer contains the current request
+ * that is supposed to be a standard control request. Assumes the fifo to
+ * be at least 2 bytes long.
+ *
+ * @return 0 if the request was NOT HANDLED,
+ * < 0 when error
+ * > 0 when the request is processed
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+{
+        int handled = 0;        /* not handled */
+
+        if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+                        == USB_TYPE_STANDARD) {
+                switch (ctrlrequest->bRequest) {
+                case USB_REQ_GET_STATUS:
+                        handled = service_tx_status_request(musb,
+                                        ctrlrequest);
+                        break;
+
+                /* case USB_REQ_SYNC_FRAME: */
+
+                default:
+                        break;
+                }
+        }
+        return handled;
+}
+
+/*
+ * Context:  caller holds controller lock
+ */
+static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
+{
+        musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
+        musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+}
+
+/*
+ * Tries to start B-device HNP negotiation if enabled via sysfs
+ */
+static inline void musb_try_b_hnp_enable(struct musb *musb)
+{
+        void __iomem    *mbase = musb->mregs;
+        u8              devctl;
+
+        DBG(1, "HNP: Setting HR\n");
+        devctl = musb_readb(mbase, MUSB_DEVCTL);
+        musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
+}
+
+/*
+ * Handle all control requests with no DATA stage, including standard
+ * requests such as:
+ * USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
+ *      always delegated to the gadget driver
+ * USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
+ *      always handled here, except for class/vendor/... features
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_zero_data_request(struct musb *musb,
+                struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+        int handled = -EINVAL;
+        void __iomem *mbase = musb->mregs;
+        const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+        /* the gadget driver handles everything except what we MUST handle */
+        if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+                        == USB_TYPE_STANDARD) {
+                switch (ctrlrequest->bRequest) {
+                case USB_REQ_SET_ADDRESS:
+                        /* change it after the status stage */
+                        musb->set_address = true;
+                        musb->address = (u8) (ctrlrequest->wValue & 0x7f);
+                        handled = 1;
+                        break;
+
+                case USB_REQ_CLEAR_FEATURE:
+                        switch (recip) {
+                        case USB_RECIP_DEVICE:
+                                if (ctrlrequest->wValue
+                                                != USB_DEVICE_REMOTE_WAKEUP)
+                                        break;
+                                musb->may_wakeup = 0;
+                                handled = 1;
+                                break;
+                        case USB_RECIP_INTERFACE:
+                                break;
+                        case USB_RECIP_ENDPOINT:{
+                                const u8 num = ctrlrequest->wIndex & 0x0f;
+                                struct musb_ep *musb_ep;
+
+                                if (num == 0
+                                                || num >= MUSB_C_NUM_EPS
+                                                || ctrlrequest->wValue
+                                                        != USB_ENDPOINT_HALT)
+                                        break;
+
+                                if (ctrlrequest->wIndex & USB_DIR_IN)
+                                        musb_ep = &musb->endpoints[num].ep_in;
+                                else
+                                        musb_ep = &musb->endpoints[num].ep_out;
+                                if (!musb_ep->desc)
+                                        break;
+
+                                /* REVISIT do it directly, no locking games */
+                                spin_unlock(&musb->lock);
+                                musb_gadget_set_halt(&musb_ep->end_point, 0);
+                                spin_lock(&musb->lock);
+
+                                /* select ep0 again */
+                                musb_ep_select(mbase, 0);
+                                handled = 1;
+                                } break;
+                        default:
+                                /* class, vendor, etc ... delegate */
+                                handled = 0;
+                                break;
+                        }
+                        break;
+
+                case USB_REQ_SET_FEATURE:
+                        switch (recip) {
+                        case USB_RECIP_DEVICE:
+                                handled = 1;
+                                switch (ctrlrequest->wValue) {
+                                case USB_DEVICE_REMOTE_WAKEUP:
+                                        musb->may_wakeup = 1;
+                                        break;
+                                case USB_DEVICE_TEST_MODE:
+                                        if (musb->g.speed != USB_SPEED_HIGH)
+                                                goto stall;
+                                        if (ctrlrequest->wIndex & 0xff)
+                                                goto stall;
+
+                                        switch (ctrlrequest->wIndex >> 8) {
+                                        case 1:
+                                                pr_debug("TEST_J\n");
+                                                /* TEST_J */
+                                                musb->test_mode_nr =
+                                                        MUSB_TEST_J;
+                                                break;
+                                        case 2:
+                                                /* TEST_K */
+                                                pr_debug("TEST_K\n");
+                                                musb->test_mode_nr =
+                                                        MUSB_TEST_K;
+                                                break;
+                                        case 3:
+                                                /* TEST_SE0_NAK */
+                                                pr_debug("TEST_SE0_NAK\n");
+                                                musb->test_mode_nr =
+                                                        MUSB_TEST_SE0_NAK;
+                                                break;
+                                        case 4:
+                                                /* TEST_PACKET */
+                                                pr_debug("TEST_PACKET\n");
+                                                musb->test_mode_nr =
+                                                        MUSB_TEST_PACKET;
+                                                break;
+                                        default:
+                                                goto stall;
+                                        }
+
+                                        /* enter test mode after irq */
+                                        if (handled > 0)
+                                                musb->test_mode = true;
+                                        break;
+#ifdef CONFIG_USB_MUSB_OTG
+                                case USB_DEVICE_B_HNP_ENABLE:
+                                        if (!musb->g.is_otg)
+                                                goto stall;
+                                        musb->g.b_hnp_enable = 1;
+                                        musb_try_b_hnp_enable(musb);
+                                        break;
+                                case USB_DEVICE_A_HNP_SUPPORT:
+                                        if (!musb->g.is_otg)
+                                                goto stall;
+                                        musb->g.a_hnp_support = 1;
+                                        break;
+                                case USB_DEVICE_A_ALT_HNP_SUPPORT:
+                                        if (!musb->g.is_otg)
+                                                goto stall;
+                                        musb->g.a_alt_hnp_support = 1;
+                                        break;
+#endif
+stall:
+                                default:
+                                        handled = -EINVAL;
+                                        break;
+                                }
+                                break;
+
+                        case USB_RECIP_INTERFACE:
+                                break;
+
+                        case USB_RECIP_ENDPOINT:{
+                                const u8                epnum =
+                                        ctrlrequest->wIndex & 0x0f;
+                                struct musb_ep          *musb_ep;
+                                struct musb_hw_ep       *ep;
+                                void __iomem            *regs;
+                                int                     is_in;
+                                u16                     csr;
+
+                                if (epnum == 0
+                                                || epnum >= MUSB_C_NUM_EPS
+                                                || ctrlrequest->wValue
+                                                        != USB_ENDPOINT_HALT)
+                                        break;
+
+                                ep = musb->endpoints + epnum;
+                                regs = ep->regs;
+                                is_in = ctrlrequest->wIndex & USB_DIR_IN;
+                                if (is_in)
+                                        musb_ep = &ep->ep_in;
+                                else
+                                        musb_ep = &ep->ep_out;
+                                if (!musb_ep->desc)
+                                        break;
+
+                                musb_ep_select(mbase, epnum);
+                                if (is_in) {
+                                        csr = musb_readw(regs,
+                                                        MUSB_TXCSR);
+                                        if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+                                                csr |= MUSB_TXCSR_FLUSHFIFO;
+                                        csr |= MUSB_TXCSR_P_SENDSTALL
+                                                | MUSB_TXCSR_CLRDATATOG
+                                                | MUSB_TXCSR_P_WZC_BITS;
+                                        musb_writew(regs, MUSB_TXCSR,
+                                                        csr);
+                                } else {
+                                        csr = musb_readw(regs,
+                                                        MUSB_RXCSR);
+                                        csr |= MUSB_RXCSR_P_SENDSTALL
+                                                | MUSB_RXCSR_FLUSHFIFO
+                                                | MUSB_RXCSR_CLRDATATOG
+                                                | MUSB_TXCSR_P_WZC_BITS;
+                                        musb_writew(regs, MUSB_RXCSR,
+                                                        csr);
+                                }
+
+                                /* select ep0 again */
+                                musb_ep_select(mbase, 0);
+                                handled = 1;
+                                } break;
+
+                        default:
+                                /* class, vendor, etc ... delegate */
+                                handled = 0;
+                                break;
+                        }
+                        break;
+                default:
+                        /* delegate SET_CONFIGURATION, etc */
+                        handled = 0;
+                }
+        } else
+                handled = 0;
+        return handled;
+}
+
+/* we have an ep0out data packet
+ * Context:  caller holds controller lock
+ */
+static void ep0_rxstate(struct musb *musb)
+{
+        void __iomem            *regs = musb->control_ep->regs;
+        struct usb_request      *req;
+        u16                     tmp;
+
+        req = next_ep0_request(musb);
+
+        /* read packet and ack; or stall because of gadget driver bug:
+         * should have provided the rx buffer before setup() returned.
+         */
+        if (req) {
+                void            *buf = req->buf + req->actual;
+                unsigned        len = req->length - req->actual;
+
+                /* read the buffer */
+                tmp = musb_readb(regs, MUSB_COUNT0);
+                if (tmp > len) {
+                        req->status = -EOVERFLOW;
+                        tmp = len;
+                }
+                musb_read_fifo(&musb->endpoints[0], tmp, buf);
+                req->actual += tmp;
+                tmp = MUSB_CSR0_P_SVDRXPKTRDY;
+                if (tmp < 64 || req->actual == req->length) {
+                        musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+                        tmp |= MUSB_CSR0_P_DATAEND;
+                } else
+                        req = NULL;
+        } else
+                tmp = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
+
+
+        /* Completion handler may choose to stall, e.g. because the
+         * message just received holds invalid data.
+         */
+        if (req) {
+                musb->ackpend = tmp;
+                musb_g_ep0_giveback(musb, req);
+                if (!musb->ackpend)
+                        return;
+                musb->ackpend = 0;
+        }
+        musb_writew(regs, MUSB_CSR0, tmp);
+}
+
+/*
+ * transmitting to the host (IN), this code might be called from IRQ
+ * and from kernel thread.
+ *
+ * Context:  caller holds controller lock
+ */
+static void ep0_txstate(struct musb *musb)
+{
+        void __iomem            *regs = musb->control_ep->regs;
+        struct usb_request      *request = next_ep0_request(musb);
+        u16                     csr = MUSB_CSR0_TXPKTRDY;
+        u8                      *fifo_src;
+        u8                      fifo_count;
+
+        if (!request) {
+                /* WARN_ON(1); */
+                DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
+                return;
+        }
+
+        /* load the data */
+        fifo_src = (u8 *) request->buf + request->actual;
+        fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
+                request->length - request->actual);
+        musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
+        request->actual += fifo_count;
+
+        /* update the flags */
+        if (fifo_count < MUSB_MAX_END0_PACKET
+                        || request->actual == request->length) {
+                musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+                csr |= MUSB_CSR0_P_DATAEND;
+        } else
+                request = NULL;
+
+        /* report completions as soon as the fifo's loaded; there's no
+         * win in waiting till this last packet gets acked.  (other than
+         * very precise fault reporting, needed by USB TMC; possible with
+         * this hardware, but not usable from portable gadget drivers.)
+         */
+        if (request) {
+                musb->ackpend = csr;
+                musb_g_ep0_giveback(musb, request);
+                if (!musb->ackpend)
+                        return;
+                musb->ackpend = 0;
+        }
+
+        /* send it out, triggering a "txpktrdy cleared" irq */
+        musb_writew(regs, MUSB_CSR0, csr);
+}
+
+/*
+ * Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
+ * Fields are left in USB byte-order.
+ *
+ * Context:  caller holds controller lock.
+ */
+static void
+musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
+{
+        struct usb_request      *r;
+        void __iomem            *regs = musb->control_ep->regs;
+
+        musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
+
+        /* NOTE:  earlier 2.6 versions changed setup packets to host
+         * order, but now USB packets always stay in USB byte order.
+         */
+        DBG(3, "SETUP req%02x.%02x v%04x i%04x l%d\n",
+                req->bRequestType,
+                req->bRequest,
+                le16_to_cpu(req->wValue),
+                le16_to_cpu(req->wIndex),
+                le16_to_cpu(req->wLength));
+
+        /* clean up any leftover transfers */
+        r = next_ep0_request(musb);
+        if (r)
+                musb_g_ep0_giveback(musb, r);
+
+        /* For zero-data requests we want to delay the STATUS stage to
+         * avoid SETUPEND errors.  If we read data (OUT), delay accepting
+         * packets until there's a buffer to store them in.
+         *
+         * If we write data, the controller acts happier if we enable
+         * the TX FIFO right away, and give the controller a moment
+         * to switch modes...
+         */
+        musb->set_address = false;
+        musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
+        if (req->wLength == 0) {
+                if (req->bRequestType & USB_DIR_IN)
+                        musb->ackpend |= MUSB_CSR0_TXPKTRDY;
+                musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
+        } else if (req->bRequestType & USB_DIR_IN) {
+                musb->ep0_state = MUSB_EP0_STAGE_TX;
+                musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
+                while ((musb_readw(regs, MUSB_CSR0)
+                                & MUSB_CSR0_RXPKTRDY) != 0)
+                        cpu_relax();
+                musb->ackpend = 0;
+        } else
+                musb->ep0_state = MUSB_EP0_STAGE_RX;
+}
+
+static int
+forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+        int retval;
+        if (!musb->gadget_driver)
+                return -EOPNOTSUPP;
+        spin_unlock(&musb->lock);
+        retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
+        spin_lock(&musb->lock);
+        return retval;
+}
+
+/*
+ * Handle peripheral ep0 interrupt
+ *
+ * Context: irq handler; we won't re-enter the driver that way.
+ */
+irqreturn_t musb_g_ep0_irq(struct musb *musb)
+{
+        u16             csr;
+        u16             len;
+        void __iomem    *mbase = musb->mregs;
+        void __iomem    *regs = musb->endpoints[0].regs;
+        irqreturn_t     retval = IRQ_NONE;
+
+        musb_ep_select(mbase, 0);       /* select ep0 */
+        csr = musb_readw(regs, MUSB_CSR0);
+        len = musb_readb(regs, MUSB_COUNT0);
+
+        DBG(4, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
+                        csr, len,
+                        musb_readb(mbase, MUSB_FADDR),
+                        decode_ep0stage(musb->ep0_state));
+
+        /* I sent a stall.. need to acknowledge it now.. */
+        if (csr & MUSB_CSR0_P_SENTSTALL) {
+                musb_writew(regs, MUSB_CSR0,
+                                csr & ~MUSB_CSR0_P_SENTSTALL);
+                retval = IRQ_HANDLED;
+                musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+                csr = musb_readw(regs, MUSB_CSR0);
+        }
+
+        /* request ended "early" */
+        if (csr & MUSB_CSR0_P_SETUPEND) {
+                musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
+                retval = IRQ_HANDLED;
+                musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+                csr = musb_readw(regs, MUSB_CSR0);
+                /* NOTE:  request may need completion */
+        }
+
+        /* docs from Mentor only describe tx, rx, and idle/setup states.
+         * we need to handle nuances around status stages, and also the
+         * case where status and setup stages come back-to-back ...
+         */
+        switch (musb->ep0_state) {
+
+        case MUSB_EP0_STAGE_TX:
+                /* irq on clearing txpktrdy */
+                if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
+                        ep0_txstate(musb);
+                        retval = IRQ_HANDLED;
+                }
+                break;
+
+        case MUSB_EP0_STAGE_RX:
+                /* irq on set rxpktrdy */
+                if (csr & MUSB_CSR0_RXPKTRDY) {
+                        ep0_rxstate(musb);
+                        retval = IRQ_HANDLED;
+                }
+                break;
+
+        case MUSB_EP0_STAGE_STATUSIN:
+                /* end of sequence #2 (OUT/RX state) or #3 (no data) */
+
+                /* update address (if needed) only @ the end of the
+                 * status phase per usb spec, which also guarantees
+                 * we get 10 msec to receive this irq... until this
+                 * is done we won't see the next packet.
+                 */
+                if (musb->set_address) {
+                        musb->set_address = false;
+                        musb_writeb(mbase, MUSB_FADDR, musb->address);
+                }
+
+                /* enter test mode if needed (exit by reset) */
+                else if (musb->test_mode) {
+                        DBG(1, "entering TESTMODE\n");
+
+                        if (MUSB_TEST_PACKET == musb->test_mode_nr)
+                                musb_load_testpacket(musb);
+
+                        musb_writeb(mbase, MUSB_TESTMODE,
+                                        musb->test_mode_nr);
+                }
+                /* FALLTHROUGH */
+
+        case MUSB_EP0_STAGE_STATUSOUT:
+                /* end of sequence #1: write to host (TX state) */
+                {
+                        struct usb_request      *req;
+
+                        req = next_ep0_request(musb);
+                        if (req)
+                                musb_g_ep0_giveback(musb, req);
+                }
+                retval = IRQ_HANDLED;
+                musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+                /* FALLTHROUGH */
+
+        case MUSB_EP0_STAGE_SETUP:
+                if (csr & MUSB_CSR0_RXPKTRDY) {
+                        struct usb_ctrlrequest  setup;
+                        int                     handled = 0;
+
+                        if (len != 8) {
+                                ERR("SETUP packet len %d != 8 ?\n", len);
+                                break;
+                        }
+                        musb_read_setup(musb, &setup);
+                        retval = IRQ_HANDLED;
+
+                        /* sometimes the RESET won't be reported */
+                        if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
+                                u8      power;
+
+                                printk(KERN_NOTICE "%s: peripheral reset "
+                                                "irq lost!\n",
+                                                musb_driver_name);
+                                power = musb_readb(mbase, MUSB_POWER);
+                                musb->g.speed = (power & MUSB_POWER_HSMODE)
+                                        ? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+                        }
+
+                        switch (musb->ep0_state) {
+
+                        /* sequence #3 (no data stage), includes requests
+                         * we can't forward (notably SET_ADDRESS and the
+                         * device/endpoint feature set/clear operations)
+                         * plus SET_CONFIGURATION and others we must
+                         */
+                        case MUSB_EP0_STAGE_ACKWAIT:
+                                handled = service_zero_data_request(
+                                                musb, &setup);
+
+                                /* status stage might be immediate */
+                                if (handled > 0) {
+                                        musb->ackpend |= MUSB_CSR0_P_DATAEND;
+                                        musb->ep0_state =
+                                                MUSB_EP0_STAGE_STATUSIN;
+                                }
+                                break;
+
+                        /* sequence #1 (IN to host), includes GET_STATUS
+                         * requests that we can't forward, GET_DESCRIPTOR
+                         * and others that we must
+                         */
+                        case MUSB_EP0_STAGE_TX:
+                                handled = service_in_request(musb, &setup);
+                                if (handled > 0) {
+                                        musb->ackpend = MUSB_CSR0_TXPKTRDY
+                                                | MUSB_CSR0_P_DATAEND;
+                                        musb->ep0_state =
+                                                MUSB_EP0_STAGE_STATUSOUT;
+                                }
+                                break;
+
+                        /* sequence #2 (OUT from host), always forward */
+                        default:                /* MUSB_EP0_STAGE_RX */
+                                break;
+                        }
+
+                        DBG(3, "handled %d, csr %04x, ep0stage %s\n",
+                                handled, csr,
+                                decode_ep0stage(musb->ep0_state));
+
+                        /* unless we need to delegate this to the gadget
+                         * driver, we know how to wrap this up:  csr0 has
+                         * not yet been written.
+                         */
+                        if (handled < 0)
+                                goto stall;
+                        else if (handled > 0)
+                                goto finish;
+
+                        handled = forward_to_driver(musb, &setup);
+                        if (handled < 0) {
+                                musb_ep_select(mbase, 0);
+stall:
+                                DBG(3, "stall (%d)\n", handled);
+                                musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
+                                musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+finish:
+                                musb_writew(regs, MUSB_CSR0,
+                                                musb->ackpend);
+                                musb->ackpend = 0;
+                        }
+                }
+                break;
+
+        case MUSB_EP0_STAGE_ACKWAIT:
+                /* This should not happen. But happens with tusb6010 with
+                 * g_file_storage and high speed. Do nothing.
+                 */
+                retval = IRQ_HANDLED;
+                break;
+
+        default:
+                /* "can't happen" */
+                WARN_ON(1);
+                musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
+                musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+                break;
+        }
+
+        return retval;
+}
+
+
+static int
+musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+{
+        /* always enabled */
+        return -EINVAL;
+}
+
+static int musb_g_ep0_disable(struct usb_ep *e)
+{
+        /* always enabled */
+        return -EINVAL;
+}
+
+static int
+musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
+{
+        struct musb_ep          *ep;
+        struct musb_request     *req;
+        struct musb             *musb;
+        int                     status;
+        unsigned long           lockflags;
+        void __iomem            *regs;
+
+        if (!e || !r)
+                return -EINVAL;
+
+        ep = to_musb_ep(e);
+        musb = ep->musb;
+        regs = musb->control_ep->regs;
+
+        req = to_musb_request(r);
+        req->musb = musb;
+        req->request.actual = 0;
+        req->request.status = -EINPROGRESS;
+        req->tx = ep->is_in;
+
+        spin_lock_irqsave(&musb->lock, lockflags);
+
+        if (!list_empty(&ep->req_list)) {
+                status = -EBUSY;
+                goto cleanup;
+        }
+
+        switch (musb->ep0_state) {
+        case MUSB_EP0_STAGE_RX:         /* control-OUT data */
+        case MUSB_EP0_STAGE_TX:         /* control-IN data */
+        case MUSB_EP0_STAGE_ACKWAIT:    /* zero-length data */
+                status = 0;
+                break;
+        default:
+                DBG(1, "ep0 request queued in state %d\n",
+                                musb->ep0_state);
+                status = -EINVAL;
+                goto cleanup;
+        }
+
+        /* add request to the list */
+        list_add_tail(&(req->request.list), &(ep->req_list));
+
+        DBG(3, "queue to %s (%s), length=%d\n",
+                        ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
+                        req->request.length);
+
+        musb_ep_select(musb->mregs, 0);
+
+        /* sequence #1, IN ... start writing the data */
+        if (musb->ep0_state == MUSB_EP0_STAGE_TX)
+                ep0_txstate(musb);
+
+        /* sequence #3, no-data ... issue IN status */
+        else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
+                if (req->request.length)
+                        status = -EINVAL;
+                else {
+                        musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+                        musb_writew(regs, MUSB_CSR0,
+                                        musb->ackpend | MUSB_CSR0_P_DATAEND);
+                        musb->ackpend = 0;
+                        musb_g_ep0_giveback(ep->musb, r);
+                }
+
+        /* else for sequence #2 (OUT), caller provides a buffer
+         * before the next packet arrives.  deferred responses
+         * (after SETUP is acked) are racey.
+         */
+        } else if (musb->ackpend) {
+                musb_writew(regs, MUSB_CSR0, musb->ackpend);
+                musb->ackpend = 0;
+        }
+
+cleanup:
+        spin_unlock_irqrestore(&musb->lock, lockflags);
+        return status;
+}
+
+static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+        /* we just won't support this */
+        return -EINVAL;
+}
+
+static int musb_g_ep0_halt(struct usb_ep *e, int value)
+{
+        struct musb_ep          *ep;
+        struct musb             *musb;
+        void __iomem            *base, *regs;
+        unsigned long           flags;
+        int                     status;
+        u16                     csr;
+
+        if (!e || !value)
+                return -EINVAL;
+
+        ep = to_musb_ep(e);
+        musb = ep->musb;
+        base = musb->mregs;
+        regs = musb->control_ep->regs;
+        status = 0;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        if (!list_empty(&ep->req_list)) {
+                status = -EBUSY;
+                goto cleanup;
+        }
+
+        musb_ep_select(base, 0);
+        csr = musb->ackpend;
+
+        switch (musb->ep0_state) {
+
+        /* Stalls are usually issued after parsing SETUP packet, either
+         * directly in irq context from setup() or else later.
+         */
+        case MUSB_EP0_STAGE_TX:         /* control-IN data */
+        case MUSB_EP0_STAGE_ACKWAIT:    /* STALL for zero-length data */
+        case MUSB_EP0_STAGE_RX:         /* control-OUT data */
+                csr = musb_readw(regs, MUSB_CSR0);
+                /* FALLTHROUGH */
+
+        /* It's also OK to issue stalls during callbacks when a non-empty
+         * DATA stage buffer has been read (or even written).
+         */
+        case MUSB_EP0_STAGE_STATUSIN:   /* control-OUT status */
+        case MUSB_EP0_STAGE_STATUSOUT:  /* control-IN status */
+
+                csr |= MUSB_CSR0_P_SENDSTALL;
+                musb_writew(regs, MUSB_CSR0, csr);
+                musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+                musb->ackpend = 0;
+                break;
+        default:
+                DBG(1, "ep0 can't halt in state %d\n", musb->ep0_state);
+                status = -EINVAL;
+        }
+
+cleanup:
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return status;
+}
+
+const struct usb_ep_ops musb_g_ep0_ops = {
+        .enable         = musb_g_ep0_enable,
+        .disable        = musb_g_ep0_disable,
+        .alloc_request  = musb_alloc_request,
+        .free_request   = musb_free_request,
+        .queue          = musb_g_ep0_queue,
+        .dequeue        = musb_g_ep0_dequeue,
+        .set_halt       = musb_g_ep0_halt,
+};
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
new file mode 100644
index 000000000000..8b4be012669a
--- /dev/null
+++ b/drivers/usb/musb/musb_host.c
@@ -0,0 +1,2170 @@
+/*
+ * MUSB OTG driver host support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include "musb_core.h"
+#include "musb_host.h"
+
+
+/* MUSB HOST status 22-mar-2006
+ *
+ * - There's still lots of partial code duplication for fault paths, so
+ *   they aren't handled as consistently as they need to be.
+ *
+ * - PIO mostly behaved when last tested.
+ *     + including ep0, with all usbtest cases 9, 10
+ *     + usbtest 14 (ep0out) doesn't seem to run at all
+ *     + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
+ *       configurations, but otherwise double buffering passes basic tests.
+ *     + for 2.6.N, for N > ~10, needs API changes for hcd framework.
+ *
+ * - DMA (CPPI) ... partially behaves, not currently recommended
+ *     + about 1/15 the speed of typical EHCI implementations (PCI)
+ *     + RX, all too often reqpkt seems to misbehave after tx
+ *     + TX, no known issues (other than evident silicon issue)
+ *
+ * - DMA (Mentor/OMAP) ...has at least toggle update problems
+ *
+ * - Still no traffic scheduling code to make NAKing for bulk or control
+ *   transfers unable to starve other requests; or to make efficient use
+ *   of hardware with periodic transfers.  (Note that network drivers
+ *   commonly post bulk reads that stay pending for a long time; these
+ *   would make very visible trouble.)
+ *
+ * - Not tested with HNP, but some SRP paths seem to behave.
+ *
+ * NOTE 24-August-2006:
+ *
+ * - Bulk traffic finally uses both sides of hardware ep1, freeing up an
+ *   extra endpoint for periodic use enabling hub + keybd + mouse.  That
+ *   mostly works, except that with "usbnet" it's easy to trigger cases
+ *   with "ping" where RX loses.  (a) ping to davinci, even "ping -f",
+ *   fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
+ *   although ARP RX wins.  (That test was done with a full speed link.)
+ */
+
+
+/*
+ * NOTE on endpoint usage:
+ *
+ * CONTROL transfers all go through ep0.  BULK ones go through dedicated IN
+ * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
+ *
+ * (Yes, bulk _could_ use more of the endpoints than that, and would even
+ * benefit from it ... one remote device may easily be NAKing while others
+ * need to perform transfers in that same direction.  The same thing could
+ * be done in software though, assuming dma cooperates.)
+ *
+ * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
+ * So far that scheduling is both dumb and optimistic:  the endpoint will be
+ * "claimed" until its software queue is no longer refilled.  No multiplexing
+ * of transfers between endpoints, or anything clever.
+ */
+
+
+static void musb_ep_program(struct musb *musb, u8 epnum,
+                        struct urb *urb, unsigned int nOut,
+                        u8 *buf, u32 len);
+
+/*
+ * Clear TX fifo. Needed to avoid BABBLE errors.
+ */
+static inline void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
+{
+        void __iomem    *epio = ep->regs;
+        u16             csr;
+        int             retries = 1000;
+
+        csr = musb_readw(epio, MUSB_TXCSR);
+        while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+                DBG(5, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
+                csr |= MUSB_TXCSR_FLUSHFIFO;
+                musb_writew(epio, MUSB_TXCSR, csr);
+                csr = musb_readw(epio, MUSB_TXCSR);
+                if (retries-- < 1) {
+                        ERR("Could not flush host TX fifo: csr: %04x\n", csr);
+                        return;
+                }
+                mdelay(1);
+        }
+}
+
+/*
+ * Start transmit. Caller is responsible for locking shared resources.
+ * musb must be locked.
+ */
+static inline void musb_h_tx_start(struct musb_hw_ep *ep)
+{
+        u16     txcsr;
+
+        /* NOTE: no locks here; caller should lock and select EP */
+        if (ep->epnum) {
+                txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+                txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
+                musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+        } else {
+                txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+                musb_writew(ep->regs, MUSB_CSR0, txcsr);
+        }
+
+}
+
+static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+{
+        u16     txcsr;
+
+        /* NOTE: no locks here; caller should lock and select EP */
+        txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+        txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+        musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+}
+
+/*
+ * Start the URB at the front of an endpoint's queue
+ * end must be claimed from the caller.
+ *
+ * Context: controller locked, irqs blocked
+ */
+static void
+musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
+{
+        u16                     frame;
+        u32                     len;
+        void                    *buf;
+        void __iomem            *mbase =  musb->mregs;
+        struct urb              *urb = next_urb(qh);
+        struct musb_hw_ep       *hw_ep = qh->hw_ep;
+        unsigned                pipe = urb->pipe;
+        u8                      address = usb_pipedevice(pipe);
+        int                     epnum = hw_ep->epnum;
+
+        /* initialize software qh state */
+        qh->offset = 0;
+        qh->segsize = 0;
+
+        /* gather right source of data */
+        switch (qh->type) {
+        case USB_ENDPOINT_XFER_CONTROL:
+                /* control transfers always start with SETUP */
+                is_in = 0;
+                hw_ep->out_qh = qh;
+                musb->ep0_stage = MUSB_EP0_START;
+                buf = urb->setup_packet;
+                len = 8;
+                break;
+        case USB_ENDPOINT_XFER_ISOC:
+                qh->iso_idx = 0;
+                qh->frame = 0;
+                buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+                len = urb->iso_frame_desc[0].length;
+                break;
+        default:                /* bulk, interrupt */
+                buf = urb->transfer_buffer;
+                len = urb->transfer_buffer_length;
+        }
+
+        DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
+                        qh, urb, address, qh->epnum,
+                        is_in ? "in" : "out",
+                        ({char *s; switch (qh->type) {
+                        case USB_ENDPOINT_XFER_CONTROL: s = ""; break;
+                        case USB_ENDPOINT_XFER_BULK:    s = "-bulk"; break;
+                        case USB_ENDPOINT_XFER_ISOC:    s = "-iso"; break;
+                        default:                        s = "-intr"; break;
+                        }; s; }),
+                        epnum, buf, len);
+
+        /* Configure endpoint */
+        if (is_in || hw_ep->is_shared_fifo)
+                hw_ep->in_qh = qh;
+        else
+                hw_ep->out_qh = qh;
+        musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+
+        /* transmit may have more work: start it when it is time */
+        if (is_in)
+                return;
+
+        /* determine if the time is right for a periodic transfer */
+        switch (qh->type) {
+        case USB_ENDPOINT_XFER_ISOC:
+        case USB_ENDPOINT_XFER_INT:
+                DBG(3, "check whether there's still time for periodic Tx\n");
+                qh->iso_idx = 0;
+                frame = musb_readw(mbase, MUSB_FRAME);
+                /* FIXME this doesn't implement that scheduling policy ...
+                 * or handle framecounter wrapping
+                 */
+                if ((urb->transfer_flags & URB_ISO_ASAP)
+                                || (frame >= urb->start_frame)) {
+                        /* REVISIT the SOF irq handler shouldn't duplicate
+                         * this code; and we don't init urb->start_frame...
+                         */
+                        qh->frame = 0;
+                        goto start;
+                } else {
+                        qh->frame = urb->start_frame;
+                        /* enable SOF interrupt so we can count down */
+                        DBG(1, "SOF for %d\n", epnum);
+#if 1 /* ifndef CONFIG_ARCH_DAVINCI */
+                        musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
+#endif
+                }
+                break;
+        default:
+start:
+                DBG(4, "Start TX%d %s\n", epnum,
+                        hw_ep->tx_channel ? "dma" : "pio");
+
+                if (!hw_ep->tx_channel)
+                        musb_h_tx_start(hw_ep);
+                else if (is_cppi_enabled() || tusb_dma_omap())
+                        cppi_host_txdma_start(hw_ep);
+        }
+}
+
+/* caller owns controller lock, irqs are blocked */
+static void
+__musb_giveback(struct musb *musb, struct urb *urb, int status)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+        DBG(({ int level; switch (urb->status) {
+                                case 0:
+                                        level = 4;
+                                        break;
+                                /* common/boring faults */
+                                case -EREMOTEIO:
+                                case -ESHUTDOWN:
+                                case -ECONNRESET:
+                                case -EPIPE:
+                                        level = 3;
+                                        break;
+                                default:
+                                        level = 2;
+                                        break;
+                                }; level; }),
+                        "complete %p (%d), dev%d ep%d%s, %d/%d\n",
+                        urb, urb->status,
+                        usb_pipedevice(urb->pipe),
+                        usb_pipeendpoint(urb->pipe),
+                        usb_pipein(urb->pipe) ? "in" : "out",
+                        urb->actual_length, urb->transfer_buffer_length
+                        );
+
+        spin_unlock(&musb->lock);
+        usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
+        spin_lock(&musb->lock);
+}
+
+/* for bulk/interrupt endpoints only */
+static inline void
+musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
+{
+        struct usb_device       *udev = urb->dev;
+        u16                     csr;
+        void __iomem            *epio = ep->regs;
+        struct musb_qh          *qh;
+
+        /* FIXME:  the current Mentor DMA code seems to have
+         * problems getting toggle correct.
+         */
+
+        if (is_in || ep->is_shared_fifo)
+                qh = ep->in_qh;
+        else
+                qh = ep->out_qh;
+
+        if (!is_in) {
+                csr = musb_readw(epio, MUSB_TXCSR);
+                usb_settoggle(udev, qh->epnum, 1,
+                        (csr & MUSB_TXCSR_H_DATATOGGLE)
+                                ? 1 : 0);
+        } else {
+                csr = musb_readw(epio, MUSB_RXCSR);
+                usb_settoggle(udev, qh->epnum, 0,
+                        (csr & MUSB_RXCSR_H_DATATOGGLE)
+                                ? 1 : 0);
+        }
+}
+
+/* caller owns controller lock, irqs are blocked */
+static struct musb_qh *
+musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+{
+        int                     is_in;
+        struct musb_hw_ep       *ep = qh->hw_ep;
+        struct musb             *musb = ep->musb;
+        int                     ready = qh->is_ready;
+
+        if (ep->is_shared_fifo)
+                is_in = 1;
+        else
+                is_in = usb_pipein(urb->pipe);
+
+        /* save toggle eagerly, for paranoia */
+        switch (qh->type) {
+        case USB_ENDPOINT_XFER_BULK:
+        case USB_ENDPOINT_XFER_INT:
+                musb_save_toggle(ep, is_in, urb);
+                break;
+        case USB_ENDPOINT_XFER_ISOC:
+                if (status == 0 && urb->error_count)
+                        status = -EXDEV;
+                break;
+        }
+
+        usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+
+        qh->is_ready = 0;
+        __musb_giveback(musb, urb, status);
+        qh->is_ready = ready;
+
+        /* reclaim resources (and bandwidth) ASAP; deschedule it, and
+         * invalidate qh as soon as list_empty(&hep->urb_list)
+         */
+        if (list_empty(&qh->hep->urb_list)) {
+                struct list_head        *head;
+
+                if (is_in)
+                        ep->rx_reinit = 1;
+                else
+                        ep->tx_reinit = 1;
+
+                /* clobber old pointers to this qh */
+                if (is_in || ep->is_shared_fifo)
+                        ep->in_qh = NULL;
+                else
+                        ep->out_qh = NULL;
+                qh->hep->hcpriv = NULL;
+
+                switch (qh->type) {
+
+                case USB_ENDPOINT_XFER_ISOC:
+                case USB_ENDPOINT_XFER_INT:
+                        /* this is where periodic bandwidth should be
+                         * de-allocated if it's tracked and allocated;
+                         * and where we'd update the schedule tree...
+                         */
+                        musb->periodic[ep->epnum] = NULL;
+                        kfree(qh);
+                        qh = NULL;
+                        break;
+
+                case USB_ENDPOINT_XFER_CONTROL:
+                case USB_ENDPOINT_XFER_BULK:
+                        /* fifo policy for these lists, except that NAKing
+                         * should rotate a qh to the end (for fairness).
+                         */
+                        head = qh->ring.prev;
+                        list_del(&qh->ring);
+                        kfree(qh);
+                        qh = first_qh(head);
+                        break;
+                }
+        }
+        return qh;
+}
+
+/*
+ * Advance this hardware endpoint's queue, completing the specified urb and
+ * advancing to either the next urb queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, irqs are blocked
+ */
+static void
+musb_advance_schedule(struct musb *musb, struct urb *urb,
+                struct musb_hw_ep *hw_ep, int is_in)
+{
+        struct musb_qh  *qh;
+
+        if (is_in || hw_ep->is_shared_fifo)
+                qh = hw_ep->in_qh;
+        else
+                qh = hw_ep->out_qh;
+
+        if (urb->status == -EINPROGRESS)
+                qh = musb_giveback(qh, urb, 0);
+        else
+                qh = musb_giveback(qh, urb, urb->status);
+
+        if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+                DBG(4, "... next ep%d %cX urb %p\n",
+                                hw_ep->epnum, is_in ? 'R' : 'T',
+                                next_urb(qh));
+                musb_start_urb(musb, is_in, qh);
+        }
+}
+
+static inline u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
+{
+        /* we don't want fifo to fill itself again;
+         * ignore dma (various models),
+         * leave toggle alone (may not have been saved yet)
+         */
+        csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_RXPKTRDY;
+        csr &= ~(MUSB_RXCSR_H_REQPKT
+                | MUSB_RXCSR_H_AUTOREQ
+                | MUSB_RXCSR_AUTOCLEAR);
+
+        /* write 2x to allow double buffering */
+        musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+        musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+
+        /* flush writebuffer */
+        return musb_readw(hw_ep->regs, MUSB_RXCSR);
+}
+
+/*
+ * PIO RX for a packet (or part of it).
+ */
+static bool
+musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
+{
+        u16                     rx_count;
+        u8                      *buf;
+        u16                     csr;
+        bool                    done = false;
+        u32                     length;
+        int                     do_flush = 0;
+        struct musb_hw_ep       *hw_ep = musb->endpoints + epnum;
+        void __iomem            *epio = hw_ep->regs;
+        struct musb_qh          *qh = hw_ep->in_qh;
+        int                     pipe = urb->pipe;
+        void                    *buffer = urb->transfer_buffer;
+
+        /* musb_ep_select(mbase, epnum); */
+        rx_count = musb_readw(epio, MUSB_RXCOUNT);
+        DBG(3, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
+                        urb->transfer_buffer, qh->offset,
+                        urb->transfer_buffer_length);
+
+        /* unload FIFO */
+        if (usb_pipeisoc(pipe)) {
+                int                                     status = 0;
+                struct usb_iso_packet_descriptor        *d;
+
+                if (iso_err) {
+                        status = -EILSEQ;
+                        urb->error_count++;
+                }
+
+                d = urb->iso_frame_desc + qh->iso_idx;
+                buf = buffer + d->offset;
+                length = d->length;
+                if (rx_count > length) {
+                        if (status == 0) {
+                                status = -EOVERFLOW;
+                                urb->error_count++;
+                        }
+                        DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+                        do_flush = 1;
+                } else
+                        length = rx_count;
+                urb->actual_length += length;
+                d->actual_length = length;
+
+                d->status = status;
+
+                /* see if we are done */
+                done = (++qh->iso_idx >= urb->number_of_packets);
+        } else {
+                /* non-isoch */
+                buf = buffer + qh->offset;
+                length = urb->transfer_buffer_length - qh->offset;
+                if (rx_count > length) {
+                        if (urb->status == -EINPROGRESS)
+                                urb->status = -EOVERFLOW;
+                        DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+                        do_flush = 1;
+                } else
+                        length = rx_count;
+                urb->actual_length += length;
+                qh->offset += length;
+
+                /* see if we are done */
+                done = (urb->actual_length == urb->transfer_buffer_length)
+                        || (rx_count < qh->maxpacket)
+                        || (urb->status != -EINPROGRESS);
+                if (done
+                                && (urb->status == -EINPROGRESS)
+                                && (urb->transfer_flags & URB_SHORT_NOT_OK)
+                                && (urb->actual_length
+                                        < urb->transfer_buffer_length))
+                        urb->status = -EREMOTEIO;
+        }
+
+        musb_read_fifo(hw_ep, length, buf);
+
+        csr = musb_readw(epio, MUSB_RXCSR);
+        csr |= MUSB_RXCSR_H_WZC_BITS;
+        if (unlikely(do_flush))
+                musb_h_flush_rxfifo(hw_ep, csr);
+        else {
+                /* REVISIT this assumes AUTOCLEAR is never set */
+                csr &= ~(MUSB_RXCSR_RXPKTRDY | MUSB_RXCSR_H_REQPKT);
+                if (!done)
+                        csr |= MUSB_RXCSR_H_REQPKT;
+                musb_writew(epio, MUSB_RXCSR, csr);
+        }
+
+        return done;
+}
+
+/* we don't always need to reinit a given side of an endpoint...
+ * when we do, use tx/rx reinit routine and then construct a new CSR
+ * to address data toggle, NYET, and DMA or PIO.
+ *
+ * it's possible that driver bugs (especially for DMA) or aborting a
+ * transfer might have left the endpoint busier than it should be.
+ * the busy/not-empty tests are basically paranoia.
+ */
+static void
+musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
+{
+        u16     csr;
+
+        /* NOTE:  we know the "rx" fifo reinit never triggers for ep0.
+         * That always uses tx_reinit since ep0 repurposes TX register
+         * offsets; the initial SETUP packet is also a kind of OUT.
+         */
+
+        /* if programmed for Tx, put it in RX mode */
+        if (ep->is_shared_fifo) {
+                csr = musb_readw(ep->regs, MUSB_TXCSR);
+                if (csr & MUSB_TXCSR_MODE) {
+                        musb_h_tx_flush_fifo(ep);
+                        musb_writew(ep->regs, MUSB_TXCSR,
+                                        MUSB_TXCSR_FRCDATATOG);
+                }
+                /* clear mode (and everything else) to enable Rx */
+                musb_writew(ep->regs, MUSB_TXCSR, 0);
+
+        /* scrub all previous state, clearing toggle */
+        } else {
+                csr = musb_readw(ep->regs, MUSB_RXCSR);
+                if (csr & MUSB_RXCSR_RXPKTRDY)
+                        WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+                                musb_readw(ep->regs, MUSB_RXCOUNT));
+
+                musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
+        }
+
+        /* target addr and (for multipoint) hub addr/port */
+        if (musb->is_multipoint) {
+                musb_writeb(ep->target_regs, MUSB_RXFUNCADDR,
+                        qh->addr_reg);
+                musb_writeb(ep->target_regs, MUSB_RXHUBADDR,
+                        qh->h_addr_reg);
+                musb_writeb(ep->target_regs, MUSB_RXHUBPORT,
+                        qh->h_port_reg);
+        } else
+                musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
+
+        /* protocol/endpoint, interval/NAKlimit, i/o size */
+        musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
+        musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
+        /* NOTE: bulk combining rewrites high bits of maxpacket */
+        musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
+
+        ep->rx_reinit = 0;
+}
+
+
+/*
+ * Program an HDRC endpoint as per the given URB
+ * Context: irqs blocked, controller lock held
+ */
+static void musb_ep_program(struct musb *musb, u8 epnum,
+                        struct urb *urb, unsigned int is_out,
+                        u8 *buf, u32 len)
+{
+        struct dma_controller   *dma_controller;
+        struct dma_channel      *dma_channel;
+        u8                      dma_ok;
+        void __iomem            *mbase = musb->mregs;
+        struct musb_hw_ep       *hw_ep = musb->endpoints + epnum;
+        void __iomem            *epio = hw_ep->regs;
+        struct musb_qh          *qh;
+        u16                     packet_sz;
+
+        if (!is_out || hw_ep->is_shared_fifo)
+                qh = hw_ep->in_qh;
+        else
+                qh = hw_ep->out_qh;
+
+        packet_sz = qh->maxpacket;
+
+        DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
+                                "h_addr%02x h_port%02x bytes %d\n",
+                        is_out ? "-->" : "<--",
+                        epnum, urb, urb->dev->speed,
+                        qh->addr_reg, qh->epnum, is_out ? "out" : "in",
+                        qh->h_addr_reg, qh->h_port_reg,
+                        len);
+
+        musb_ep_select(mbase, epnum);
+
+        /* candidate for DMA? */
+        dma_controller = musb->dma_controller;
+        if (is_dma_capable() && epnum && dma_controller) {
+                dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
+                if (!dma_channel) {
+                        dma_channel = dma_controller->channel_alloc(
+                                        dma_controller, hw_ep, is_out);
+                        if (is_out)
+                                hw_ep->tx_channel = dma_channel;
+                        else
+                                hw_ep->rx_channel = dma_channel;
+                }
+        } else
+                dma_channel = NULL;
+
+        /* make sure we clear DMAEnab, autoSet bits from previous run */
+
+        /* OUT/transmit/EP0 or IN/receive? */
+        if (is_out) {
+                u16     csr;
+                u16     int_txe;
+                u16     load_count;
+
+                csr = musb_readw(epio, MUSB_TXCSR);
+
+                /* disable interrupt in case we flush */
+                int_txe = musb_readw(mbase, MUSB_INTRTXE);
+                musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+                /* general endpoint setup */
+                if (epnum) {
+                        /* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+                        /* flush all old state, set default */
+                        musb_h_tx_flush_fifo(hw_ep);
+                        csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
+                                        | MUSB_TXCSR_DMAMODE
+                                        | MUSB_TXCSR_FRCDATATOG
+                                        | MUSB_TXCSR_H_RXSTALL
+                                        | MUSB_TXCSR_H_ERROR
+                                        | MUSB_TXCSR_TXPKTRDY
+                                        );
+                        csr |= MUSB_TXCSR_MODE;
+
+                        if (usb_gettoggle(urb->dev,
+                                        qh->epnum, 1))
+                                csr |= MUSB_TXCSR_H_WR_DATATOGGLE
+                                        | MUSB_TXCSR_H_DATATOGGLE;
+                        else
+                                csr |= MUSB_TXCSR_CLRDATATOG;
+
+                        /* twice in case of double packet buffering */
+                        musb_writew(epio, MUSB_TXCSR, csr);
+                        /* REVISIT may need to clear FLUSHFIFO ... */
+                        musb_writew(epio, MUSB_TXCSR, csr);
+                        csr = musb_readw(epio, MUSB_TXCSR);
+                } else {
+                        /* endpoint 0: just flush */
+                        musb_writew(epio, MUSB_CSR0,
+                                csr | MUSB_CSR0_FLUSHFIFO);
+                        musb_writew(epio, MUSB_CSR0,
+                                csr | MUSB_CSR0_FLUSHFIFO);
+                }
+
+                /* target addr and (for multipoint) hub addr/port */
+                if (musb->is_multipoint) {
+                        musb_writeb(mbase,
+                                MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
+                                qh->addr_reg);
+                        musb_writeb(mbase,
+                                MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
+                                qh->h_addr_reg);
+                        musb_writeb(mbase,
+                                MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
+                                qh->h_port_reg);
+/* FIXME if !epnum, do the same for RX ... */
+                } else
+                        musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
+
+                /* protocol/endpoint/interval/NAKlimit */
+                if (epnum) {
+                        musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
+                        if (can_bulk_split(musb, qh->type))
+                                musb_writew(epio, MUSB_TXMAXP,
+                                        packet_sz
+                                        | ((hw_ep->max_packet_sz_tx /
+                                                packet_sz) - 1) << 11);
+                        else
+                                musb_writew(epio, MUSB_TXMAXP,
+                                        packet_sz);
+                        musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
+                } else {
+                        musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
+                        if (musb->is_multipoint)
+                                musb_writeb(epio, MUSB_TYPE0,
+                                                qh->type_reg);
+                }
+
+                if (can_bulk_split(musb, qh->type))
+                        load_count = min((u32) hw_ep->max_packet_sz_tx,
+                                                len);
+                else
+                        load_count = min((u32) packet_sz, len);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+                if (dma_channel) {
+
+                        /* clear previous state */
+                        csr = musb_readw(epio, MUSB_TXCSR);
+                        csr &= ~(MUSB_TXCSR_AUTOSET
+                                | MUSB_TXCSR_DMAMODE
+                                | MUSB_TXCSR_DMAENAB);
+                        csr |= MUSB_TXCSR_MODE;
+                        musb_writew(epio, MUSB_TXCSR,
+                                csr | MUSB_TXCSR_MODE);
+
+                        qh->segsize = min(len, dma_channel->max_len);
+
+                        if (qh->segsize <= packet_sz)
+                                dma_channel->desired_mode = 0;
+                        else
+                                dma_channel->desired_mode = 1;
+
+
+                        if (dma_channel->desired_mode == 0) {
+                                csr &= ~(MUSB_TXCSR_AUTOSET
+                                        | MUSB_TXCSR_DMAMODE);
+                                csr |= (MUSB_TXCSR_DMAENAB);
+                                        /* against programming guide */
+                        } else
+                                csr |= (MUSB_TXCSR_AUTOSET
+                                        | MUSB_TXCSR_DMAENAB
+                                        | MUSB_TXCSR_DMAMODE);
+
+                        musb_writew(epio, MUSB_TXCSR, csr);
+
+                        dma_ok = dma_controller->channel_program(
+                                        dma_channel, packet_sz,
+                                        dma_channel->desired_mode,
+                                        urb->transfer_dma,
+                                        qh->segsize);
+                        if (dma_ok) {
+                                load_count = 0;
+                        } else {
+                                dma_controller->channel_release(dma_channel);
+                                if (is_out)
+                                        hw_ep->tx_channel = NULL;
+                                else
+                                        hw_ep->rx_channel = NULL;
+                                dma_channel = NULL;
+                        }
+                }
+#endif
+
+                /* candidate for DMA */
+                if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+
+                        /* program endpoint CSRs first, then setup DMA.
+                         * assume CPPI setup succeeds.
+                         * defer enabling dma.
+                         */
+                        csr = musb_readw(epio, MUSB_TXCSR);
+                        csr &= ~(MUSB_TXCSR_AUTOSET
+                                        | MUSB_TXCSR_DMAMODE
+                                        | MUSB_TXCSR_DMAENAB);
+                        csr |= MUSB_TXCSR_MODE;
+                        musb_writew(epio, MUSB_TXCSR,
+                                csr | MUSB_TXCSR_MODE);
+
+                        dma_channel->actual_len = 0L;
+                        qh->segsize = len;
+
+                        /* TX uses "rndis" mode automatically, but needs help
+                         * to identify the zero-length-final-packet case.
+                         */
+                        dma_ok = dma_controller->channel_program(
+                                        dma_channel, packet_sz,
+                                        (urb->transfer_flags
+                                                        & URB_ZERO_PACKET)
+                                                == URB_ZERO_PACKET,
+                                        urb->transfer_dma,
+                                        qh->segsize);
+                        if (dma_ok) {
+                                load_count = 0;
+                        } else {
+                                dma_controller->channel_release(dma_channel);
+                                hw_ep->tx_channel = NULL;
+                                dma_channel = NULL;
+
+                                /* REVISIT there's an error path here that
+                                 * needs handling:  can't do dma, but
+                                 * there's no pio buffer address...
+                                 */
+                        }
+                }
+
+                if (load_count) {
+                        /* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+                        /* PIO to load FIFO */
+                        qh->segsize = load_count;
+                        musb_write_fifo(hw_ep, load_count, buf);
+                        csr = musb_readw(epio, MUSB_TXCSR);
+                        csr &= ~(MUSB_TXCSR_DMAENAB
+                                | MUSB_TXCSR_DMAMODE
+                                | MUSB_TXCSR_AUTOSET);
+                        /* write CSR */
+                        csr |= MUSB_TXCSR_MODE;
+
+                        if (epnum)
+                                musb_writew(epio, MUSB_TXCSR, csr);
+                }
+
+                /* re-enable interrupt */
+                musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+        /* IN/receive */
+        } else {
+                u16     csr;
+
+                if (hw_ep->rx_reinit) {
+                        musb_rx_reinit(musb, qh, hw_ep);
+
+                        /* init new state: toggle and NYET, maybe DMA later */
+                        if (usb_gettoggle(urb->dev, qh->epnum, 0))
+                                csr = MUSB_RXCSR_H_WR_DATATOGGLE
+                                        | MUSB_RXCSR_H_DATATOGGLE;
+                        else
+                                csr = 0;
+                        if (qh->type == USB_ENDPOINT_XFER_INT)
+                                csr |= MUSB_RXCSR_DISNYET;
+
+                } else {
+                        csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+
+                        if (csr & (MUSB_RXCSR_RXPKTRDY
+                                        | MUSB_RXCSR_DMAENAB
+                                        | MUSB_RXCSR_H_REQPKT))
+                                ERR("broken !rx_reinit, ep%d csr %04x\n",
+                                                hw_ep->epnum, csr);
+
+                        /* scrub any stale state, leaving toggle alone */
+                        csr &= MUSB_RXCSR_DISNYET;
+                }
+
+                /* kick things off */
+
+                if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+                        /* candidate for DMA */
+                        if (dma_channel) {
+                                dma_channel->actual_len = 0L;
+                                qh->segsize = len;
+
+                                /* AUTOREQ is in a DMA register */
+                                musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+                                csr = musb_readw(hw_ep->regs,
+                                                MUSB_RXCSR);
+
+                                /* unless caller treats short rx transfers as
+                                 * errors, we dare not queue multiple transfers.
+                                 */
+                                dma_ok = dma_controller->channel_program(
+                                                dma_channel, packet_sz,
+                                                !(urb->transfer_flags
+                                                        & URB_SHORT_NOT_OK),
+                                                urb->transfer_dma,
+                                                qh->segsize);
+                                if (!dma_ok) {
+                                        dma_controller->channel_release(
+                                                        dma_channel);
+                                        hw_ep->rx_channel = NULL;
+                                        dma_channel = NULL;
+                                } else
+                                        csr |= MUSB_RXCSR_DMAENAB;
+                        }
+                }
+
+                csr |= MUSB_RXCSR_H_REQPKT;
+                DBG(7, "RXCSR%d := %04x\n", epnum, csr);
+                musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+                csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+        }
+}
+
+
+/*
+ * Service the default endpoint (ep0) as host.
+ * Return true until it's time to start the status stage.
+ */
+static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
+{
+        bool                     more = false;
+        u8                      *fifo_dest = NULL;
+        u16                     fifo_count = 0;
+        struct musb_hw_ep       *hw_ep = musb->control_ep;
+        struct musb_qh          *qh = hw_ep->in_qh;
+        struct usb_ctrlrequest  *request;
+
+        switch (musb->ep0_stage) {
+        case MUSB_EP0_IN:
+                fifo_dest = urb->transfer_buffer + urb->actual_length;
+                fifo_count = min(len, ((u16) (urb->transfer_buffer_length
+                                        - urb->actual_length)));
+                if (fifo_count < len)
+                        urb->status = -EOVERFLOW;
+
+                musb_read_fifo(hw_ep, fifo_count, fifo_dest);
+
+                urb->actual_length += fifo_count;
+                if (len < qh->maxpacket) {
+                        /* always terminate on short read; it's
+                         * rarely reported as an error.
+                         */
+                } else if (urb->actual_length <
+                                urb->transfer_buffer_length)
+                        more = true;
+                break;
+        case MUSB_EP0_START:
+                request = (struct usb_ctrlrequest *) urb->setup_packet;
+
+                if (!request->wLength) {
+                        DBG(4, "start no-DATA\n");
+                        break;
+                } else if (request->bRequestType & USB_DIR_IN) {
+                        DBG(4, "start IN-DATA\n");
+                        musb->ep0_stage = MUSB_EP0_IN;
+                        more = true;
+                        break;
+                } else {
+                        DBG(4, "start OUT-DATA\n");
+                        musb->ep0_stage = MUSB_EP0_OUT;
+                        more = true;
+                }
+                /* FALLTHROUGH */
+        case MUSB_EP0_OUT:
+                fifo_count = min(qh->maxpacket, ((u16)
+                                (urb->transfer_buffer_length
+                                - urb->actual_length)));
+
+                if (fifo_count) {
+                        fifo_dest = (u8 *) (urb->transfer_buffer
+                                        + urb->actual_length);
+                        DBG(3, "Sending %d bytes to %p\n",
+                                        fifo_count, fifo_dest);
+                        musb_write_fifo(hw_ep, fifo_count, fifo_dest);
+
+                        urb->actual_length += fifo_count;
+                        more = true;
+                }
+                break;
+        default:
+                ERR("bogus ep0 stage %d\n", musb->ep0_stage);
+                break;
+        }
+
+        return more;
+}
+
+/*
+ * Handle default endpoint interrupt as host. Only called in IRQ time
+ * from the LinuxIsr() interrupt service routine.
+ *
+ * called with controller irqlocked
+ */
+irqreturn_t musb_h_ep0_irq(struct musb *musb)
+{
+        struct urb              *urb;
+        u16                     csr, len;
+        int                     status = 0;
+        void __iomem            *mbase = musb->mregs;
+        struct musb_hw_ep       *hw_ep = musb->control_ep;
+        void __iomem            *epio = hw_ep->regs;
+        struct musb_qh          *qh = hw_ep->in_qh;
+        bool                    complete = false;
+        irqreturn_t             retval = IRQ_NONE;
+
+        /* ep0 only has one queue, "in" */
+        urb = next_urb(qh);
+
+        musb_ep_select(mbase, 0);
+        csr = musb_readw(epio, MUSB_CSR0);
+        len = (csr & MUSB_CSR0_RXPKTRDY)
+                        ? musb_readb(epio, MUSB_COUNT0)
+                        : 0;
+
+        DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
+                csr, qh, len, urb, musb->ep0_stage);
+
+        /* if we just did status stage, we are done */
+        if (MUSB_EP0_STATUS == musb->ep0_stage) {
+                retval = IRQ_HANDLED;
+                complete = true;
+        }
+
+        /* prepare status */
+        if (csr & MUSB_CSR0_H_RXSTALL) {
+                DBG(6, "STALLING ENDPOINT\n");
+                status = -EPIPE;
+
+        } else if (csr & MUSB_CSR0_H_ERROR) {
+                DBG(2, "no response, csr0 %04x\n", csr);
+                status = -EPROTO;
+
+        } else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
+                DBG(2, "control NAK timeout\n");
+
+                /* NOTE:  this code path would be a good place to PAUSE a
+                 * control transfer, if another one is queued, so that
+                 * ep0 is more likely to stay busy.
+                 *
+                 * if (qh->ring.next != &musb->control), then
+                 * we have a candidate... NAKing is *NOT* an error
+                 */
+                musb_writew(epio, MUSB_CSR0, 0);
+                retval = IRQ_HANDLED;
+        }
+
+        if (status) {
+                DBG(6, "aborting\n");
+                retval = IRQ_HANDLED;
+                if (urb)
+                        urb->status = status;
+                complete = true;
+
+                /* use the proper sequence to abort the transfer */
+                if (csr & MUSB_CSR0_H_REQPKT) {
+                        csr &= ~MUSB_CSR0_H_REQPKT;
+                        musb_writew(epio, MUSB_CSR0, csr);
+                        csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+                        musb_writew(epio, MUSB_CSR0, csr);
+                } else {
+                        csr |= MUSB_CSR0_FLUSHFIFO;
+                        musb_writew(epio, MUSB_CSR0, csr);
+                        musb_writew(epio, MUSB_CSR0, csr);
+                        csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+                        musb_writew(epio, MUSB_CSR0, csr);
+                }
+
+                musb_writeb(epio, MUSB_NAKLIMIT0, 0);
+
+                /* clear it */
+                musb_writew(epio, MUSB_CSR0, 0);
+        }
+
+        if (unlikely(!urb)) {
+                /* stop endpoint since we have no place for its data, this
+                 * SHOULD NEVER HAPPEN! */
+                ERR("no URB for end 0\n");
+
+                musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+                musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+                musb_writew(epio, MUSB_CSR0, 0);
+
+                goto done;
+        }
+
+        if (!complete) {
+                /* call common logic and prepare response */
+                if (musb_h_ep0_continue(musb, len, urb)) {
+                        /* more packets required */
+                        csr = (MUSB_EP0_IN == musb->ep0_stage)
+                                ?  MUSB_CSR0_H_REQPKT : MUSB_CSR0_TXPKTRDY;
+                } else {
+                        /* data transfer complete; perform status phase */
+                        if (usb_pipeout(urb->pipe)
+                                        || !urb->transfer_buffer_length)
+                                csr = MUSB_CSR0_H_STATUSPKT
+                                        | MUSB_CSR0_H_REQPKT;
+                        else
+                                csr = MUSB_CSR0_H_STATUSPKT
+                                        | MUSB_CSR0_TXPKTRDY;
+
+                        /* flag status stage */
+                        musb->ep0_stage = MUSB_EP0_STATUS;
+
+                        DBG(5, "ep0 STATUS, csr %04x\n", csr);
+
+                }
+                musb_writew(epio, MUSB_CSR0, csr);
+                retval = IRQ_HANDLED;
+        } else
+                musb->ep0_stage = MUSB_EP0_IDLE;
+
+        /* call completion handler if done */
+        if (complete)
+                musb_advance_schedule(musb, urb, hw_ep, 1);
+done:
+        return retval;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side TX (OUT) using Mentor DMA works as follows:
+        submit_urb ->
+                - if queue was empty, Program Endpoint
+                - ... which starts DMA to fifo in mode 1 or 0
+
+        DMA Isr (transfer complete) -> TxAvail()
+                - Stop DMA (~DmaEnab)   (<--- Alert ... currently happens
+                                        only in musb_cleanup_urb)
+                - TxPktRdy has to be set in mode 0 or for
+                        short packets in mode 1.
+*/
+
+#endif
+
+/* Service a Tx-Available or dma completion irq for the endpoint */
+void musb_host_tx(struct musb *musb, u8 epnum)
+{
+        int                     pipe;
+        bool                    done = false;
+        u16                     tx_csr;
+        size_t                  wLength = 0;
+        u8                      *buf = NULL;
+        struct urb              *urb;
+        struct musb_hw_ep       *hw_ep = musb->endpoints + epnum;
+        void __iomem            *epio = hw_ep->regs;
+        struct musb_qh          *qh = hw_ep->out_qh;
+        u32                     status = 0;
+        void __iomem            *mbase = musb->mregs;
+        struct dma_channel      *dma;
+
+        urb = next_urb(qh);
+
+        musb_ep_select(mbase, epnum);
+        tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+        /* with CPPI, DMA sometimes triggers "extra" irqs */
+        if (!urb) {
+                DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+                goto finish;
+        }
+
+        pipe = urb->pipe;
+        dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
+        DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
+                        dma ? ", dma" : "");
+
+        /* check for errors */
+        if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
+                /* dma was disabled, fifo flushed */
+                DBG(3, "TX end %d stall\n", epnum);
+
+                /* stall; record URB status */
+                status = -EPIPE;
+
+        } else if (tx_csr & MUSB_TXCSR_H_ERROR) {
+                /* (NON-ISO) dma was disabled, fifo flushed */
+                DBG(3, "TX 3strikes on ep=%d\n", epnum);
+
+                status = -ETIMEDOUT;
+
+        } else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
+                DBG(6, "TX end=%d device not responding\n", epnum);
+
+                /* NOTE:  this code path would be a good place to PAUSE a
+                 * transfer, if there's some other (nonperiodic) tx urb
+                 * that could use this fifo.  (dma complicates it...)
+                 *
+                 * if (bulk && qh->ring.next != &musb->out_bulk), then
+                 * we have a candidate... NAKing is *NOT* an error
+                 */
+                musb_ep_select(mbase, epnum);
+                musb_writew(epio, MUSB_TXCSR,
+                                MUSB_TXCSR_H_WZC_BITS
+                                | MUSB_TXCSR_TXPKTRDY);
+                goto finish;
+        }
+
+        if (status) {
+                if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+                        dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+                        (void) musb->dma_controller->channel_abort(dma);
+                }
+
+                /* do the proper sequence to abort the transfer in the
+                 * usb core; the dma engine should already be stopped.
+                 */
+                musb_h_tx_flush_fifo(hw_ep);
+                tx_csr &= ~(MUSB_TXCSR_AUTOSET
+                                | MUSB_TXCSR_DMAENAB
+                                | MUSB_TXCSR_H_ERROR
+                                | MUSB_TXCSR_H_RXSTALL
+                                | MUSB_TXCSR_H_NAKTIMEOUT
+                                );
+
+                musb_ep_select(mbase, epnum);
+                musb_writew(epio, MUSB_TXCSR, tx_csr);
+                /* REVISIT may need to clear FLUSHFIFO ... */
+                musb_writew(epio, MUSB_TXCSR, tx_csr);
+                musb_writeb(epio, MUSB_TXINTERVAL, 0);
+
+                done = true;
+        }
+
+        /* second cppi case */
+        if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+                DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+                goto finish;
+
+        }
+
+        /* REVISIT this looks wrong... */
+        if (!status || dma || usb_pipeisoc(pipe)) {
+                if (dma)
+                        wLength = dma->actual_len;
+                else
+                        wLength = qh->segsize;
+                qh->offset += wLength;
+
+                if (usb_pipeisoc(pipe)) {
+                        struct usb_iso_packet_descriptor        *d;
+
+                        d = urb->iso_frame_desc + qh->iso_idx;
+                        d->actual_length = qh->segsize;
+                        if (++qh->iso_idx >= urb->number_of_packets) {
+                                done = true;
+                        } else {
+                                d++;
+                                buf = urb->transfer_buffer + d->offset;
+                                wLength = d->length;
+                        }
+                } else if (dma) {
+                        done = true;
+                } else {
+                        /* see if we need to send more data, or ZLP */
+                        if (qh->segsize < qh->maxpacket)
+                                done = true;
+                        else if (qh->offset == urb->transfer_buffer_length
+                                        && !(urb->transfer_flags
+                                                & URB_ZERO_PACKET))
+                                done = true;
+                        if (!done) {
+                                buf = urb->transfer_buffer
+                                                + qh->offset;
+                                wLength = urb->transfer_buffer_length
+                                                - qh->offset;
+                        }
+                }
+        }
+
+        /* urb->status != -EINPROGRESS means request has been faulted,
+         * so we must abort this transfer after cleanup
+         */
+        if (urb->status != -EINPROGRESS) {
+                done = true;
+                if (status == 0)
+                        status = urb->status;
+        }
+
+        if (done) {
+                /* set status */
+                urb->status = status;
+                urb->actual_length = qh->offset;
+                musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+
+        } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
+                /* WARN_ON(!buf); */
+
+                /* REVISIT:  some docs say that when hw_ep->tx_double_buffered,
+                 * (and presumably, fifo is not half-full) we should write TWO
+                 * packets before updating TXCSR ... other docs disagree ...
+                 */
+                /* PIO:  start next packet in this URB */
+                wLength = min(qh->maxpacket, (u16) wLength);
+                musb_write_fifo(hw_ep, wLength, buf);
+                qh->segsize = wLength;
+
+                musb_ep_select(mbase, epnum);
+                musb_writew(epio, MUSB_TXCSR,
+                                MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+        } else
+                DBG(1, "not complete, but dma enabled?\n");
+
+finish:
+        return;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side RX (IN) using Mentor DMA works as follows:
+        submit_urb ->
+                - if queue was empty, ProgramEndpoint
+                - first IN token is sent out (by setting ReqPkt)
+        LinuxIsr -> RxReady()
+        /\      => first packet is received
+        |       - Set in mode 0 (DmaEnab, ~ReqPkt)
+        |               -> DMA Isr (transfer complete) -> RxReady()
+        |                   - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
+        |                   - if urb not complete, send next IN token (ReqPkt)
+        |                          |            else complete urb.
+        |                          |
+        ---------------------------
+ *
+ * Nuances of mode 1:
+ *      For short packets, no ack (+RxPktRdy) is sent automatically
+ *      (even if AutoClear is ON)
+ *      For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
+ *      automatically => major problem, as collecting the next packet becomes
+ *      difficult. Hence mode 1 is not used.
+ *
+ * REVISIT
+ *      All we care about at this driver level is that
+ *       (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
+ *       (b) termination conditions are: short RX, or buffer full;
+ *       (c) fault modes include
+ *           - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
+ *             (and that endpoint's dma queue stops immediately)
+ *           - overflow (full, PLUS more bytes in the terminal packet)
+ *
+ *      So for example, usb-storage sets URB_SHORT_NOT_OK, and would
+ *      thus be a great candidate for using mode 1 ... for all but the
+ *      last packet of one URB's transfer.
+ */
+
+#endif
+
+/*
+ * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
+ * and high-bandwidth IN transfer cases.
+ */
+void musb_host_rx(struct musb *musb, u8 epnum)
+{
+        struct urb              *urb;
+        struct musb_hw_ep       *hw_ep = musb->endpoints + epnum;
+        void __iomem            *epio = hw_ep->regs;
+        struct musb_qh          *qh = hw_ep->in_qh;
+        size_t                  xfer_len;
+        void __iomem            *mbase = musb->mregs;
+        int                     pipe;
+        u16                     rx_csr, val;
+        bool                    iso_err = false;
+        bool                    done = false;
+        u32                     status;
+        struct dma_channel      *dma;
+
+        musb_ep_select(mbase, epnum);
+
+        urb = next_urb(qh);
+        dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
+        status = 0;
+        xfer_len = 0;
+
+        rx_csr = musb_readw(epio, MUSB_RXCSR);
+        val = rx_csr;
+
+        if (unlikely(!urb)) {
+                /* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
+                 * usbtest #11 (unlinks) triggers it regularly, sometimes
+                 * with fifo full.  (Only with DMA??)
+                 */
+                DBG(3, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
+                        musb_readw(epio, MUSB_RXCOUNT));
+                musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+                return;
+        }
+
+        pipe = urb->pipe;
+
+        DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+                epnum, rx_csr, urb->actual_length,
+                dma ? dma->actual_len : 0);
+
+        /* check for errors, concurrent stall & unlink is not really
+         * handled yet! */
+        if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
+                DBG(3, "RX end %d STALL\n", epnum);
+
+                /* stall; record URB status */
+                status = -EPIPE;
+
+        } else if (rx_csr & MUSB_RXCSR_H_ERROR) {
+                DBG(3, "end %d RX proto error\n", epnum);
+
+                status = -EPROTO;
+                musb_writeb(epio, MUSB_RXINTERVAL, 0);
+
+        } else if (rx_csr & MUSB_RXCSR_DATAERROR) {
+
+                if (USB_ENDPOINT_XFER_ISOC != qh->type) {
+                        /* NOTE this code path would be a good place to PAUSE a
+                         * transfer, if there's some other (nonperiodic) rx urb
+                         * that could use this fifo.  (dma complicates it...)
+                         *
+                         * if (bulk && qh->ring.next != &musb->in_bulk), then
+                         * we have a candidate... NAKing is *NOT* an error
+                         */
+                        DBG(6, "RX end %d NAK timeout\n", epnum);
+                        musb_ep_select(mbase, epnum);
+                        musb_writew(epio, MUSB_RXCSR,
+                                        MUSB_RXCSR_H_WZC_BITS
+                                        | MUSB_RXCSR_H_REQPKT);
+
+                        goto finish;
+                } else {
+                        DBG(4, "RX end %d ISO data error\n", epnum);
+                        /* packet error reported later */
+                        iso_err = true;
+                }
+        }
+
+        /* faults abort the transfer */
+        if (status) {
+                /* clean up dma and collect transfer count */
+                if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+                        dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+                        (void) musb->dma_controller->channel_abort(dma);
+                        xfer_len = dma->actual_len;
+                }
+                musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+                musb_writeb(epio, MUSB_RXINTERVAL, 0);
+                done = true;
+                goto finish;
+        }
+
+        if (unlikely(dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY)) {
+                /* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
+                ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
+                goto finish;
+        }
+
+        /* thorough shutdown for now ... given more precise fault handling
+         * and better queueing support, we might keep a DMA pipeline going
+         * while processing this irq for earlier completions.
+         */
+
+        /* FIXME this is _way_ too much in-line logic for Mentor DMA */
+
+#ifndef CONFIG_USB_INVENTRA_DMA
+        if (rx_csr & MUSB_RXCSR_H_REQPKT)  {
+                /* REVISIT this happened for a while on some short reads...
+                 * the cleanup still needs investigation... looks bad...
+                 * and also duplicates dma cleanup code above ... plus,
+                 * shouldn't this be the "half full" double buffer case?
+                 */
+                if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+                        dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+                        (void) musb->dma_controller->channel_abort(dma);
+                        xfer_len = dma->actual_len;
+                        done = true;
+                }
+
+                DBG(2, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
+                                xfer_len, dma ? ", dma" : "");
+                rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+                musb_ep_select(mbase, epnum);
+                musb_writew(epio, MUSB_RXCSR,
+                                MUSB_RXCSR_H_WZC_BITS | rx_csr);
+        }
+#endif
+        if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+                xfer_len = dma->actual_len;
+
+                val &= ~(MUSB_RXCSR_DMAENAB
+                        | MUSB_RXCSR_H_AUTOREQ
+                        | MUSB_RXCSR_AUTOCLEAR
+                        | MUSB_RXCSR_RXPKTRDY);
+                musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+                /* done if urb buffer is full or short packet is recd */
+                done = (urb->actual_length + xfer_len >=
+                                urb->transfer_buffer_length
+                        || dma->actual_len < qh->maxpacket);
+
+                /* send IN token for next packet, without AUTOREQ */
+                if (!done) {
+                        val |= MUSB_RXCSR_H_REQPKT;
+                        musb_writew(epio, MUSB_RXCSR,
+                                MUSB_RXCSR_H_WZC_BITS | val);
+                }
+
+                DBG(4, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
+                        done ? "off" : "reset",
+                        musb_readw(epio, MUSB_RXCSR),
+                        musb_readw(epio, MUSB_RXCOUNT));
+#else
+                done = true;
+#endif
+        } else if (urb->status == -EINPROGRESS) {
+                /* if no errors, be sure a packet is ready for unloading */
+                if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) {
+                        status = -EPROTO;
+                        ERR("Rx interrupt with no errors or packet!\n");
+
+                        /* FIXME this is another "SHOULD NEVER HAPPEN" */
+
+/* SCRUB (RX) */
+                        /* do the proper sequence to abort the transfer */
+                        musb_ep_select(mbase, epnum);
+                        val &= ~MUSB_RXCSR_H_REQPKT;
+                        musb_writew(epio, MUSB_RXCSR, val);
+                        goto finish;
+                }
+
+                /* we are expecting IN packets */
+#ifdef CONFIG_USB_INVENTRA_DMA
+                if (dma) {
+                        struct dma_controller   *c;
+                        u16                     rx_count;
+                        int                     ret;
+
+                        rx_count = musb_readw(epio, MUSB_RXCOUNT);
+
+                        DBG(2, "RX%d count %d, buffer 0x%x len %d/%d\n",
+                                        epnum, rx_count,
+                                        urb->transfer_dma
+                                                + urb->actual_length,
+                                        qh->offset,
+                                        urb->transfer_buffer_length);
+
+                        c = musb->dma_controller;
+
+                        dma->desired_mode = 0;
+#ifdef USE_MODE1
+                        /* because of the issue below, mode 1 will
+                         * only rarely behave with correct semantics.
+                         */
+                        if ((urb->transfer_flags &
+                                                URB_SHORT_NOT_OK)
+                                && (urb->transfer_buffer_length -
+                                                urb->actual_length)
+                                        > qh->maxpacket)
+                                dma->desired_mode = 1;
+#endif
+
+/* Disadvantage of using mode 1:
+ *      It's basically usable only for mass storage class; essentially all
+ *      other protocols also terminate transfers on short packets.
+ *
+ * Details:
+ *      An extra IN token is sent at the end of the transfer (due to AUTOREQ)
+ *      If you try to use mode 1 for (transfer_buffer_length - 512), and try
+ *      to use the extra IN token to grab the last packet using mode 0, then
+ *      the problem is that you cannot be sure when the device will send the
+ *      last packet and RxPktRdy set. Sometimes the packet is recd too soon
+ *      such that it gets lost when RxCSR is re-set at the end of the mode 1
+ *      transfer, while sometimes it is recd just a little late so that if you
+ *      try to configure for mode 0 soon after the mode 1 transfer is
+ *      completed, you will find rxcount 0. Okay, so you might think why not
+ *      wait for an interrupt when the pkt is recd. Well, you won't get any!
+ */
+
+                        val = musb_readw(epio, MUSB_RXCSR);
+                        val &= ~MUSB_RXCSR_H_REQPKT;
+
+                        if (dma->desired_mode == 0)
+                                val &= ~MUSB_RXCSR_H_AUTOREQ;
+                        else
+                                val |= MUSB_RXCSR_H_AUTOREQ;
+                        val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
+
+                        musb_writew(epio, MUSB_RXCSR,
+                                MUSB_RXCSR_H_WZC_BITS | val);
+
+                        /* REVISIT if when actual_length != 0,
+                         * transfer_buffer_length needs to be
+                         * adjusted first...
+                         */
+                        ret = c->channel_program(
+                                dma, qh->maxpacket,
+                                dma->desired_mode,
+                                urb->transfer_dma
+                                        + urb->actual_length,
+                                (dma->desired_mode == 0)
+                                        ? rx_count
+                                        : urb->transfer_buffer_length);
+
+                        if (!ret) {
+                                c->channel_release(dma);
+                                hw_ep->rx_channel = NULL;
+                                dma = NULL;
+                                /* REVISIT reset CSR */
+                        }
+                }
+#endif  /* Mentor DMA */
+
+                if (!dma) {
+                        done = musb_host_packet_rx(musb, urb,
+                                        epnum, iso_err);
+                        DBG(6, "read %spacket\n", done ? "last " : "");
+                }
+        }
+
+        if (dma && usb_pipeisoc(pipe)) {
+                struct usb_iso_packet_descriptor        *d;
+                int                                     iso_stat = status;
+
+                d = urb->iso_frame_desc + qh->iso_idx;
+                d->actual_length += xfer_len;
+                if (iso_err) {
+                        iso_stat = -EILSEQ;
+                        urb->error_count++;
+                }
+                d->status = iso_stat;
+        }
+
+finish:
+        urb->actual_length += xfer_len;
+        qh->offset += xfer_len;
+        if (done) {
+                if (urb->status == -EINPROGRESS)
+                        urb->status = status;
+                musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
+        }
+}
+
+/* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
+ * the software schedule associates multiple such nodes with a given
+ * host side hardware endpoint + direction; scheduling may activate
+ * that hardware endpoint.
+ */
+static int musb_schedule(
+        struct musb             *musb,
+        struct musb_qh          *qh,
+        int                     is_in)
+{
+        int                     idle;
+        int                     best_diff;
+        int                     best_end, epnum;
+        struct musb_hw_ep       *hw_ep = NULL;
+        struct list_head        *head = NULL;
+
+        /* use fixed hardware for control and bulk */
+        switch (qh->type) {
+        case USB_ENDPOINT_XFER_CONTROL:
+                head = &musb->control;
+                hw_ep = musb->control_ep;
+                break;
+        case USB_ENDPOINT_XFER_BULK:
+                hw_ep = musb->bulk_ep;
+                if (is_in)
+                        head = &musb->in_bulk;
+                else
+                        head = &musb->out_bulk;
+                break;
+        }
+        if (head) {
+                idle = list_empty(head);
+                list_add_tail(&qh->ring, head);
+                goto success;
+        }
+
+        /* else, periodic transfers get muxed to other endpoints */
+
+        /* FIXME this doesn't consider direction, so it can only
+         * work for one half of the endpoint hardware, and assumes
+         * the previous cases handled all non-shared endpoints...
+         */
+
+        /* we know this qh hasn't been scheduled, so all we need to do
+         * is choose which hardware endpoint to put it on ...
+         *
+         * REVISIT what we really want here is a regular schedule tree
+         * like e.g. OHCI uses, but for now musb->periodic is just an
+         * array of the _single_ logical endpoint associated with a
+         * given physical one (identity mapping logical->physical).
+         *
+         * that simplistic approach makes TT scheduling a lot simpler;
+         * there is none, and thus none of its complexity...
+         */
+        best_diff = 4096;
+        best_end = -1;
+
+        for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
+                int     diff;
+
+                if (musb->periodic[epnum])
+                        continue;
+                hw_ep = &musb->endpoints[epnum];
+                if (hw_ep == musb->bulk_ep)
+                        continue;
+
+                if (is_in)
+                        diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
+                else
+                        diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
+
+                if (diff > 0 && best_diff > diff) {
+                        best_diff = diff;
+                        best_end = epnum;
+                }
+        }
+        if (best_end < 0)
+                return -ENOSPC;
+
+        idle = 1;
+        hw_ep = musb->endpoints + best_end;
+        musb->periodic[best_end] = qh;
+        DBG(4, "qh %p periodic slot %d\n", qh, best_end);
+success:
+        qh->hw_ep = hw_ep;
+        qh->hep->hcpriv = qh;
+        if (idle)
+                musb_start_urb(musb, is_in, qh);
+        return 0;
+}
+
+static int musb_urb_enqueue(
+        struct usb_hcd                  *hcd,
+        struct urb                      *urb,
+        gfp_t                           mem_flags)
+{
+        unsigned long                   flags;
+        struct musb                     *musb = hcd_to_musb(hcd);
+        struct usb_host_endpoint        *hep = urb->ep;
+        struct musb_qh                  *qh = hep->hcpriv;
+        struct usb_endpoint_descriptor  *epd = &hep->desc;
+        int                             ret;
+        unsigned                        type_reg;
+        unsigned                        interval;
+
+        /* host role must be active */
+        if (!is_host_active(musb) || !musb->is_active)
+                return -ENODEV;
+
+        spin_lock_irqsave(&musb->lock, flags);
+        ret = usb_hcd_link_urb_to_ep(hcd, urb);
+        spin_unlock_irqrestore(&musb->lock, flags);
+        if (ret)
+                return ret;
+
+        /* DMA mapping was already done, if needed, and this urb is on
+         * hep->urb_list ... so there's little to do unless hep wasn't
+         * yet scheduled onto a live qh.
+         *
+         * REVISIT best to keep hep->hcpriv valid until the endpoint gets
+         * disabled, testing for empty qh->ring and avoiding qh setup costs
+         * except for the first urb queued after a config change.
+         */
+        if (qh) {
+                urb->hcpriv = qh;
+                return 0;
+        }
+
+        /* Allocate and initialize qh, minimizing the work done each time
+         * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
+         *
+         * REVISIT consider a dedicated qh kmem_cache, so it's harder
+         * for bugs in other kernel code to break this driver...
+         */
+        qh = kzalloc(sizeof *qh, mem_flags);
+        if (!qh) {
+                usb_hcd_unlink_urb_from_ep(hcd, urb);
+                return -ENOMEM;
+        }
+
+        qh->hep = hep;
+        qh->dev = urb->dev;
+        INIT_LIST_HEAD(&qh->ring);
+        qh->is_ready = 1;
+
+        qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+
+        /* no high bandwidth support yet */
+        if (qh->maxpacket & ~0x7ff) {
+                ret = -EMSGSIZE;
+                goto done;
+        }
+
+        qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+        qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+        /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
+        qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
+
+        /* precompute rxtype/txtype/type0 register */
+        type_reg = (qh->type << 4) | qh->epnum;
+        switch (urb->dev->speed) {
+        case USB_SPEED_LOW:
+                type_reg |= 0xc0;
+                break;
+        case USB_SPEED_FULL:
+                type_reg |= 0x80;
+                break;
+        default:
+                type_reg |= 0x40;
+        }
+        qh->type_reg = type_reg;
+
+        /* precompute rxinterval/txinterval register */
+        interval = min((u8)16, epd->bInterval); /* log encoding */
+        switch (qh->type) {
+        case USB_ENDPOINT_XFER_INT:
+                /* fullspeed uses linear encoding */
+                if (USB_SPEED_FULL == urb->dev->speed) {
+                        interval = epd->bInterval;
+                        if (!interval)
+                                interval = 1;
+                }
+                /* FALLTHROUGH */
+        case USB_ENDPOINT_XFER_ISOC:
+                /* iso always uses log encoding */
+                break;
+        default:
+                /* REVISIT we actually want to use NAK limits, hinting to the
+                 * transfer scheduling logic to try some other qh, e.g. try
+                 * for 2 msec first:
+                 *
+                 * interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
+                 *
+                 * The downside of disabling this is that transfer scheduling
+                 * gets VERY unfair for nonperiodic transfers; a misbehaving
+                 * peripheral could make that hurt.  Or for reads, one that's
+                 * perfectly normal:  network and other drivers keep reads
+                 * posted at all times, having one pending for a week should
+                 * be perfectly safe.
+                 *
+                 * The upside of disabling it is avoidng transfer scheduling
+                 * code to put this aside for while.
+                 */
+                interval = 0;
+        }
+        qh->intv_reg = interval;
+
+        /* precompute addressing for external hub/tt ports */
+        if (musb->is_multipoint) {
+                struct usb_device       *parent = urb->dev->parent;
+
+                if (parent != hcd->self.root_hub) {
+                        qh->h_addr_reg = (u8) parent->devnum;
+
+                        /* set up tt info if needed */
+                        if (urb->dev->tt) {
+                                qh->h_port_reg = (u8) urb->dev->ttport;
+                                qh->h_addr_reg |= 0x80;
+                        }
+                }
+        }
+
+        /* invariant: hep->hcpriv is null OR the qh that's already scheduled.
+         * until we get real dma queues (with an entry for each urb/buffer),
+         * we only have work to do in the former case.
+         */
+        spin_lock_irqsave(&musb->lock, flags);
+        if (hep->hcpriv) {
+                /* some concurrent activity submitted another urb to hep...
+                 * odd, rare, error prone, but legal.
+                 */
+                kfree(qh);
+                ret = 0;
+        } else
+                ret = musb_schedule(musb, qh,
+                                epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK);
+
+        if (ret == 0) {
+                urb->hcpriv = qh;
+                /* FIXME set urb->start_frame for iso/intr, it's tested in
+                 * musb_start_urb(), but otherwise only konicawc cares ...
+                 */
+        }
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+done:
+        if (ret != 0) {
+                usb_hcd_unlink_urb_from_ep(hcd, urb);
+                kfree(qh);
+        }
+        return ret;
+}
+
+
+/*
+ * abort a transfer that's at the head of a hardware queue.
+ * called with controller locked, irqs blocked
+ * that hardware queue advances to the next transfer, unless prevented
+ */
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+{
+        struct musb_hw_ep       *ep = qh->hw_ep;
+        void __iomem            *epio = ep->regs;
+        unsigned                hw_end = ep->epnum;
+        void __iomem            *regs = ep->musb->mregs;
+        u16                     csr;
+        int                     status = 0;
+
+        musb_ep_select(regs, hw_end);
+
+        if (is_dma_capable()) {
+                struct dma_channel      *dma;
+
+                dma = is_in ? ep->rx_channel : ep->tx_channel;
+                if (dma) {
+                        status = ep->musb->dma_controller->channel_abort(dma);
+                        DBG(status ? 1 : 3,
+                                "abort %cX%d DMA for urb %p --> %d\n",
+                                is_in ? 'R' : 'T', ep->epnum,
+                                urb, status);
+                        urb->actual_length += dma->actual_len;
+                }
+        }
+
+        /* turn off DMA requests, discard state, stop polling ... */
+        if (is_in) {
+                /* giveback saves bulk toggle */
+                csr = musb_h_flush_rxfifo(ep, 0);
+
+                /* REVISIT we still get an irq; should likely clear the
+                 * endpoint's irq status here to avoid bogus irqs.
+                 * clearing that status is platform-specific...
+                 */
+        } else {
+                musb_h_tx_flush_fifo(ep);
+                csr = musb_readw(epio, MUSB_TXCSR);
+                csr &= ~(MUSB_TXCSR_AUTOSET
+                        | MUSB_TXCSR_DMAENAB
+                        | MUSB_TXCSR_H_RXSTALL
+                        | MUSB_TXCSR_H_NAKTIMEOUT
+                        | MUSB_TXCSR_H_ERROR
+                        | MUSB_TXCSR_TXPKTRDY);
+                musb_writew(epio, MUSB_TXCSR, csr);
+                /* REVISIT may need to clear FLUSHFIFO ... */
+                musb_writew(epio, MUSB_TXCSR, csr);
+                /* flush cpu writebuffer */
+                csr = musb_readw(epio, MUSB_TXCSR);
+        }
+        if (status == 0)
+                musb_advance_schedule(ep->musb, urb, ep, is_in);
+        return status;
+}
+
+static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+        struct musb             *musb = hcd_to_musb(hcd);
+        struct musb_qh          *qh;
+        struct list_head        *sched;
+        unsigned long           flags;
+        int                     ret;
+
+        DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
+                        usb_pipedevice(urb->pipe),
+                        usb_pipeendpoint(urb->pipe),
+                        usb_pipein(urb->pipe) ? "in" : "out");
+
+        spin_lock_irqsave(&musb->lock, flags);
+        ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+        if (ret)
+                goto done;
+
+        qh = urb->hcpriv;
+        if (!qh)
+                goto done;
+
+        /* Any URB not actively programmed into endpoint hardware can be
+         * immediately given back.  Such an URB must be at the head of its
+         * endpoint queue, unless someday we get real DMA queues.  And even
+         * then, it might not be known to the hardware...
+         *
+         * Otherwise abort current transfer, pending dma, etc.; urb->status
+         * has already been updated.  This is a synchronous abort; it'd be
+         * OK to hold off until after some IRQ, though.
+         */
+        if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
+                ret = -EINPROGRESS;
+        else {
+                switch (qh->type) {
+                case USB_ENDPOINT_XFER_CONTROL:
+                        sched = &musb->control;
+                        break;
+                case USB_ENDPOINT_XFER_BULK:
+                        if (usb_pipein(urb->pipe))
+                                sched = &musb->in_bulk;
+                        else
+                                sched = &musb->out_bulk;
+                        break;
+                default:
+                        /* REVISIT when we get a schedule tree, periodic
+                         * transfers won't always be at the head of a
+                         * singleton queue...
+                         */
+                        sched = NULL;
+                        break;
+                }
+        }
+
+        /* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+        if (ret < 0 || (sched && qh != first_qh(sched))) {
+                int     ready = qh->is_ready;
+
+                ret = 0;
+                qh->is_ready = 0;
+                __musb_giveback(musb, urb, 0);
+                qh->is_ready = ready;
+        } else
+                ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+done:
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return ret;
+}
+
+/* disable an endpoint */
+static void
+musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+        u8                      epnum = hep->desc.bEndpointAddress;
+        unsigned long           flags;
+        struct musb             *musb = hcd_to_musb(hcd);
+        u8                      is_in = epnum & USB_DIR_IN;
+        struct musb_qh          *qh = hep->hcpriv;
+        struct urb              *urb, *tmp;
+        struct list_head        *sched;
+
+        if (!qh)
+                return;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        switch (qh->type) {
+        case USB_ENDPOINT_XFER_CONTROL:
+                sched = &musb->control;
+                break;
+        case USB_ENDPOINT_XFER_BULK:
+                if (is_in)
+                        sched = &musb->in_bulk;
+                else
+                        sched = &musb->out_bulk;
+                break;
+        default:
+                /* REVISIT when we get a schedule tree, periodic transfers
+                 * won't always be at the head of a singleton queue...
+                 */
+                sched = NULL;
+                break;
+        }
+
+        /* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+
+        /* kick first urb off the hardware, if needed */
+        qh->is_ready = 0;
+        if (!sched || qh == first_qh(sched)) {
+                urb = next_urb(qh);
+
+                /* make software (then hardware) stop ASAP */
+                if (!urb->unlinked)
+                        urb->status = -ESHUTDOWN;
+
+                /* cleanup */
+                musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+        } else
+                urb = NULL;
+
+        /* then just nuke all the others */
+        list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
+                musb_giveback(qh, urb, -ESHUTDOWN);
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int musb_h_get_frame_number(struct usb_hcd *hcd)
+{
+        struct musb     *musb = hcd_to_musb(hcd);
+
+        return musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_h_start(struct usb_hcd *hcd)
+{
+        struct musb     *musb = hcd_to_musb(hcd);
+
+        /* NOTE: musb_start() is called when the hub driver turns
+         * on port power, or when (OTG) peripheral starts.
+         */
+        hcd->state = HC_STATE_RUNNING;
+        musb->port1_status = 0;
+        return 0;
+}
+
+static void musb_h_stop(struct usb_hcd *hcd)
+{
+        musb_stop(hcd_to_musb(hcd));
+        hcd->state = HC_STATE_HALT;
+}
+
+static int musb_bus_suspend(struct usb_hcd *hcd)
+{
+        struct musb     *musb = hcd_to_musb(hcd);
+
+        if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+                return 0;
+
+        if (is_host_active(musb) && musb->is_active) {
+                WARNING("trying to suspend as %s is_active=%i\n",
+                        otg_state_string(musb), musb->is_active);
+                return -EBUSY;
+        } else
+                return 0;
+}
+
+static int musb_bus_resume(struct usb_hcd *hcd)
+{
+        /* resuming child port does the work */
+        return 0;
+}
+
+const struct hc_driver musb_hc_driver = {
+        .description            = "musb-hcd",
+        .product_desc           = "MUSB HDRC host driver",
+        .hcd_priv_size          = sizeof(struct musb),
+        .flags                  = HCD_USB2 | HCD_MEMORY,
+
+        /* not using irq handler or reset hooks from usbcore, since
+         * those must be shared with peripheral code for OTG configs
+         */
+
+        .start                  = musb_h_start,
+        .stop                   = musb_h_stop,
+
+        .get_frame_number       = musb_h_get_frame_number,
+
+        .urb_enqueue            = musb_urb_enqueue,
+        .urb_dequeue            = musb_urb_dequeue,
+        .endpoint_disable       = musb_h_disable,
+
+        .hub_status_data        = musb_hub_status_data,
+        .hub_control            = musb_hub_control,
+        .bus_suspend            = musb_bus_suspend,
+        .bus_resume             = musb_bus_resume,
+        /* .start_port_reset    = NULL, */
+        /* .hub_irq_enable      = NULL, */
+};
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
new file mode 100644
index 000000000000..77bcdb9d5b32
--- /dev/null
+++ b/drivers/usb/musb/musb_host.h
@@ -0,0 +1,110 @@
+/*
+ * MUSB OTG driver host defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _MUSB_HOST_H
+#define _MUSB_HOST_H
+
+static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
+{
+        return container_of((void *) musb, struct usb_hcd, hcd_priv);
+}
+
+static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+        return (struct musb *) (hcd->hcd_priv);
+}
+
+/* stored in "usb_host_endpoint.hcpriv" for scheduled endpoints */
+struct musb_qh {
+        struct usb_host_endpoint *hep;          /* usbcore info */
+        struct usb_device       *dev;
+        struct musb_hw_ep       *hw_ep;         /* current binding */
+
+        struct list_head        ring;           /* of musb_qh */
+        /* struct musb_qh               *next; */       /* for periodic tree */
+
+        unsigned                offset;         /* in urb->transfer_buffer */
+        unsigned                segsize;        /* current xfer fragment */
+
+        u8                      type_reg;       /* {rx,tx} type register */
+        u8                      intv_reg;       /* {rx,tx} interval register */
+        u8                      addr_reg;       /* device address register */
+        u8                      h_addr_reg;     /* hub address register */
+        u8                      h_port_reg;     /* hub port register */
+
+        u8                      is_ready;       /* safe to modify hw_ep */
+        u8                      type;           /* XFERTYPE_* */
+        u8                      epnum;
+        u16                     maxpacket;
+        u16                     frame;          /* for periodic schedule */
+        unsigned                iso_idx;        /* in urb->iso_frame_desc[] */
+};
+
+/* map from control or bulk queue head to the first qh on that ring */
+static inline struct musb_qh *first_qh(struct list_head *q)
+{
+        if (list_empty(q))
+                return NULL;
+        return list_entry(q->next, struct musb_qh, ring);
+}
+
+
+extern void musb_root_disconnect(struct musb *musb);
+
+struct usb_hcd;
+
+extern int musb_hub_status_data(struct usb_hcd *hcd, char *buf);
+extern int musb_hub_control(struct usb_hcd *hcd,
+                        u16 typeReq, u16 wValue, u16 wIndex,
+                        char *buf, u16 wLength);
+
+extern const struct hc_driver musb_hc_driver;
+
+static inline struct urb *next_urb(struct musb_qh *qh)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        struct list_head        *queue;
+
+        if (!qh)
+                return NULL;
+        queue = &qh->hep->urb_list;
+        if (list_empty(queue))
+                return NULL;
+        return list_entry(queue->next, struct urb, urb_list);
+#else
+        return NULL;
+#endif
+}
+
+#endif                          /* _MUSB_HOST_H */
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
new file mode 100644
index 000000000000..6bbedae83af8
--- /dev/null
+++ b/drivers/usb/musb/musb_io.h
@@ -0,0 +1,115 @@
+/*
+ * MUSB OTG driver register I/O
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_PLATFORM_ARCH_H__
+#define __MUSB_LINUX_PLATFORM_ARCH_H__
+
+#include <linux/io.h>
+
+#ifndef CONFIG_ARM
+static inline void readsl(const void __iomem *addr, void *buf, int len)
+        { insl((unsigned long)addr, buf, len); }
+static inline void readsw(const void __iomem *addr, void *buf, int len)
+        { insw((unsigned long)addr, buf, len); }
+static inline void readsb(const void __iomem *addr, void *buf, int len)
+        { insb((unsigned long)addr, buf, len); }
+
+static inline void writesl(const void __iomem *addr, const void *buf, int len)
+        { outsl((unsigned long)addr, buf, len); }
+static inline void writesw(const void __iomem *addr, const void *buf, int len)
+        { outsw((unsigned long)addr, buf, len); }
+static inline void writesb(const void __iomem *addr, const void *buf, int len)
+        { outsb((unsigned long)addr, buf, len); }
+
+#endif
+
+/* NOTE:  these offsets are all in bytes */
+
+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+        { return __raw_readw(addr + offset); }
+
+static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
+        { return __raw_readl(addr + offset); }
+
+
+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+        { __raw_writew(data, addr + offset); }
+
+static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+        { __raw_writel(data, addr + offset); }
+
+
+#ifdef CONFIG_USB_TUSB6010
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+{
+        u16 tmp;
+        u8 val;
+
+        tmp = __raw_readw(addr + (offset & ~1));
+        if (offset & 1)
+                val = (tmp >> 8);
+        else
+                val = tmp & 0xff;
+
+        return val;
+}
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+        u16 tmp;
+
+        tmp = __raw_readw(addr + (offset & ~1));
+        if (offset & 1)
+                tmp = (data << 8) | (tmp & 0xff);
+        else
+                tmp = (tmp & 0xff00) | data;
+
+        __raw_writew(tmp, addr + (offset & ~1));
+}
+
+#else
+
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+        { return __raw_readb(addr + offset); }
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+        { __raw_writeb(data, addr + offset); }
+
+#endif  /* CONFIG_USB_TUSB6010 */
+
+#endif
diff --git a/drivers/usb/musb/musb_procfs.c b/drivers/usb/musb/musb_procfs.c
new file mode 100644
index 000000000000..55e6b78bdccc
--- /dev/null
+++ b/drivers/usb/musb/musb_procfs.c
@@ -0,0 +1,830 @@
+/*
+ * MUSB OTG driver debug support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>      /* FIXME remove procfs writes */
+#include <asm/arch/hardware.h>
+
+#include "musb_core.h"
+
+#include "davinci.h"
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+
+static int dump_qh(struct musb_qh *qh, char *buf, unsigned max)
+{
+        int                             count;
+        int                             tmp;
+        struct usb_host_endpoint        *hep = qh->hep;
+        struct urb                      *urb;
+
+        count = snprintf(buf, max, "    qh %p dev%d ep%d%s max%d\n",
+                        qh, qh->dev->devnum, qh->epnum,
+                        ({ char *s; switch (qh->type) {
+                        case USB_ENDPOINT_XFER_BULK:
+                                s = "-bulk"; break;
+                        case USB_ENDPOINT_XFER_INT:
+                                s = "-int"; break;
+                        case USB_ENDPOINT_XFER_CONTROL:
+                                s = ""; break;
+                        default:
+                                s = "iso"; break;
+                        }; s; }),
+                        qh->maxpacket);
+        if (count <= 0)
+                return 0;
+        buf += count;
+        max -= count;
+
+        list_for_each_entry(urb, &hep->urb_list, urb_list) {
+                tmp = snprintf(buf, max, "\t%s urb %p %d/%d\n",
+                                usb_pipein(urb->pipe) ? "in" : "out",
+                                urb, urb->actual_length,
+                                urb->transfer_buffer_length);
+                if (tmp <= 0)
+                        break;
+                tmp = min(tmp, (int)max);
+                count += tmp;
+                buf += tmp;
+                max -= tmp;
+        }
+        return count;
+}
+
+static int
+dump_queue(struct list_head *q, char *buf, unsigned max)
+{
+        int             count = 0;
+        struct musb_qh  *qh;
+
+        list_for_each_entry(qh, q, ring) {
+                int     tmp;
+
+                tmp = dump_qh(qh, buf, max);
+                if (tmp <= 0)
+                        break;
+                tmp = min(tmp, (int)max);
+                count += tmp;
+                buf += tmp;
+                max -= tmp;
+        }
+        return count;
+}
+
+#endif  /* HCD */
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+static int dump_ep(struct musb_ep *ep, char *buffer, unsigned max)
+{
+        char            *buf = buffer;
+        int             code = 0;
+        void __iomem    *regs = ep->hw_ep->regs;
+        char            *mode = "1buf";
+
+        if (ep->is_in) {
+                if (ep->hw_ep->tx_double_buffered)
+                        mode = "2buf";
+        } else {
+                if (ep->hw_ep->rx_double_buffered)
+                        mode = "2buf";
+        }
+
+        do {
+                struct usb_request      *req;
+
+                code = snprintf(buf, max,
+                                "\n%s (hw%d): %s%s, csr %04x maxp %04x\n",
+                                ep->name, ep->current_epnum,
+                                mode, ep->dma ? " dma" : "",
+                                musb_readw(regs,
+                                        (ep->is_in || !ep->current_epnum)
+                                                ? MUSB_TXCSR
+                                                : MUSB_RXCSR),
+                                musb_readw(regs, ep->is_in
+                                                ? MUSB_TXMAXP
+                                                : MUSB_RXMAXP)
+                                );
+                if (code <= 0)
+                        break;
+                code = min(code, (int) max);
+                buf += code;
+                max -= code;
+
+                if (is_cppi_enabled() && ep->current_epnum) {
+                        unsigned        cppi = ep->current_epnum - 1;
+                        void __iomem    *base = ep->musb->ctrl_base;
+                        unsigned        off1 = cppi << 2;
+                        void __iomem    *ram = base;
+                        char            tmp[16];
+
+                        if (ep->is_in) {
+                                ram += DAVINCI_TXCPPI_STATERAM_OFFSET(cppi);
+                                tmp[0] = 0;
+                        } else {
+                                ram += DAVINCI_RXCPPI_STATERAM_OFFSET(cppi);
+                                snprintf(tmp, sizeof tmp, "%d left, ",
+                                        musb_readl(base,
+                                        DAVINCI_RXCPPI_BUFCNT0_REG + off1));
+                        }
+
+                        code = snprintf(buf, max, "%cX DMA%d: %s"
+                                        "%08x %08x, %08x %08x; "
+                                        "%08x %08x %08x .. %08x\n",
+                                ep->is_in ? 'T' : 'R',
+                                ep->current_epnum - 1, tmp,
+                                musb_readl(ram, 0 * 4),
+                                musb_readl(ram, 1 * 4),
+                                musb_readl(ram, 2 * 4),
+                                musb_readl(ram, 3 * 4),
+                                musb_readl(ram, 4 * 4),
+                                musb_readl(ram, 5 * 4),
+                                musb_readl(ram, 6 * 4),
+                                musb_readl(ram, 7 * 4));
+                        if (code <= 0)
+                                break;
+                        code = min(code, (int) max);
+                        buf += code;
+                        max -= code;
+                }
+
+                if (list_empty(&ep->req_list)) {
+                        code = snprintf(buf, max, "\t(queue empty)\n");
+                        if (code <= 0)
+                                break;
+                        code = min(code, (int) max);
+                        buf += code;
+                        max -= code;
+                        break;
+                }
+                list_for_each_entry(req, &ep->req_list, list) {
+                        code = snprintf(buf, max, "\treq %p, %s%s%d/%d\n",
+                                        req,
+                                        req->zero ? "zero, " : "",
+                                        req->short_not_ok ? "!short, " : "",
+                                        req->actual, req->length);
+                        if (code <= 0)
+                                break;
+                        code = min(code, (int) max);
+                        buf += code;
+                        max -= code;
+                }
+        } while (0);
+        return buf - buffer;
+}
+#endif
+
+static int
+dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max)
+{
+        int                     code = 0;
+        char                    *buf = aBuffer;
+        struct musb_hw_ep       *hw_ep = &musb->endpoints[epnum];
+
+        do {
+                musb_ep_select(musb->mregs, epnum);
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+                if (is_host_active(musb)) {
+                        int             dump_rx, dump_tx;
+                        void __iomem    *regs = hw_ep->regs;
+
+                        /* TEMPORARY (!) until we have a real periodic
+                         * schedule tree ...
+                         */
+                        if (!epnum) {
+                                /* control is shared, uses RX queue
+                                 * but (mostly) shadowed tx registers
+                                 */
+                                dump_tx = !list_empty(&musb->control);
+                                dump_rx = 0;
+                        } else if (hw_ep == musb->bulk_ep) {
+                                dump_tx = !list_empty(&musb->out_bulk);
+                                dump_rx = !list_empty(&musb->in_bulk);
+                        } else if (musb->periodic[epnum]) {
+                                struct usb_host_endpoint        *hep;
+
+                                hep = musb->periodic[epnum]->hep;
+                                dump_rx = hep->desc.bEndpointAddress
+                                                & USB_ENDPOINT_DIR_MASK;
+                                dump_tx = !dump_rx;
+                        } else
+                                break;
+                        /* END TEMPORARY */
+
+
+                        if (dump_rx) {
+                                code = snprintf(buf, max,
+                                        "\nRX%d: %s rxcsr %04x interval %02x "
+                                        "max %04x type %02x; "
+                                        "dev %d hub %d port %d"
+                                        "\n",
+                                        epnum,
+                                        hw_ep->rx_double_buffered
+                                                ? "2buf" : "1buf",
+                                        musb_readw(regs, MUSB_RXCSR),
+                                        musb_readb(regs, MUSB_RXINTERVAL),
+                                        musb_readw(regs, MUSB_RXMAXP),
+                                        musb_readb(regs, MUSB_RXTYPE),
+                                        /* FIXME:  assumes multipoint */
+                                        musb_readb(musb->mregs,
+                                                MUSB_BUSCTL_OFFSET(epnum,
+                                                MUSB_RXFUNCADDR)),
+                                        musb_readb(musb->mregs,
+                                                MUSB_BUSCTL_OFFSET(epnum,
+                                                MUSB_RXHUBADDR)),
+                                        musb_readb(musb->mregs,
+                                                MUSB_BUSCTL_OFFSET(epnum,
+                                                MUSB_RXHUBPORT))
+                                        );
+                                if (code <= 0)
+                                        break;
+                                code = min(code, (int) max);
+                                buf += code;
+                                max -= code;
+
+                                if (is_cppi_enabled()
+                                                && epnum
+                                                && hw_ep->rx_channel) {
+                                        unsigned        cppi = epnum - 1;
+                                        unsigned        off1 = cppi << 2;
+                                        void __iomem    *base;
+                                        void __iomem    *ram;
+                                        char            tmp[16];
+
+                                        base = musb->ctrl_base;
+                                        ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
+                                                        cppi) + base;
+                                        snprintf(tmp, sizeof tmp, "%d left, ",
+                                                musb_readl(base,
+                                                DAVINCI_RXCPPI_BUFCNT0_REG
+                                                                + off1));
+
+                                        code = snprintf(buf, max,
+                                                "    rx dma%d: %s"
+                                                "%08x %08x, %08x %08x; "
+                                                "%08x %08x %08x .. %08x\n",
+                                                cppi, tmp,
+                                                musb_readl(ram, 0 * 4),
+                                                musb_readl(ram, 1 * 4),
+                                                musb_readl(ram, 2 * 4),
+                                                musb_readl(ram, 3 * 4),
+                                                musb_readl(ram, 4 * 4),
+                                                musb_readl(ram, 5 * 4),
+                                                musb_readl(ram, 6 * 4),
+                                                musb_readl(ram, 7 * 4));
+                                        if (code <= 0)
+                                                break;
+                                        code = min(code, (int) max);
+                                        buf += code;
+                                        max -= code;
+                                }
+
+                                if (hw_ep == musb->bulk_ep
+                                                && !list_empty(
+                                                        &musb->in_bulk)) {
+                                        code = dump_queue(&musb->in_bulk,
+                                                        buf, max);
+                                        if (code <= 0)
+                                                break;
+                                        code = min(code, (int) max);
+                                        buf += code;
+                                        max -= code;
+                                } else if (musb->periodic[epnum]) {
+                                        code = dump_qh(musb->periodic[epnum],
+                                                        buf, max);
+                                        if (code <= 0)
+                                                break;
+                                        code = min(code, (int) max);
+                                        buf += code;
+                                        max -= code;
+                                }
+                        }
+
+                        if (dump_tx) {
+                                code = snprintf(buf, max,
+                                        "\nTX%d: %s txcsr %04x interval %02x "
+                                        "max %04x type %02x; "
+                                        "dev %d hub %d port %d"
+                                        "\n",
+                                        epnum,
+                                        hw_ep->tx_double_buffered
+                                                ? "2buf" : "1buf",
+                                        musb_readw(regs, MUSB_TXCSR),
+                                        musb_readb(regs, MUSB_TXINTERVAL),
+                                        musb_readw(regs, MUSB_TXMAXP),
+                                        musb_readb(regs, MUSB_TXTYPE),
+                                        /* FIXME:  assumes multipoint */
+                                        musb_readb(musb->mregs,
+                                                MUSB_BUSCTL_OFFSET(epnum,
+                                                MUSB_TXFUNCADDR)),
+                                        musb_readb(musb->mregs,
+                                                MUSB_BUSCTL_OFFSET(epnum,
+                                                MUSB_TXHUBADDR)),
+                                        musb_readb(musb->mregs,
+                                                MUSB_BUSCTL_OFFSET(epnum,
+                                                MUSB_TXHUBPORT))
+                                        );
+                                if (code <= 0)
+                                        break;
+                                code = min(code, (int) max);
+                                buf += code;
+                                max -= code;
+
+                                if (is_cppi_enabled()
+                                                && epnum
+                                                && hw_ep->tx_channel) {
+                                        unsigned        cppi = epnum - 1;
+                                        void __iomem    *base;
+                                        void __iomem    *ram;
+
+                                        base = musb->ctrl_base;
+                                        ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
+                                                        cppi) + base;
+                                        code = snprintf(buf, max,
+                                                "    tx dma%d: "
+                                                "%08x %08x, %08x %08x; "
+                                                "%08x %08x %08x .. %08x\n",
+                                                cppi,
+                                                musb_readl(ram, 0 * 4),
+                                                musb_readl(ram, 1 * 4),
+                                                musb_readl(ram, 2 * 4),
+                                                musb_readl(ram, 3 * 4),
+                                                musb_readl(ram, 4 * 4),
+                                                musb_readl(ram, 5 * 4),
+                                                musb_readl(ram, 6 * 4),
+                                                musb_readl(ram, 7 * 4));
+                                        if (code <= 0)
+                                                break;
+                                        code = min(code, (int) max);
+                                        buf += code;
+                                        max -= code;
+                                }
+
+                                if (hw_ep == musb->control_ep
+                                                && !list_empty(
+                                                        &musb->control)) {
+                                        code = dump_queue(&musb->control,
+                                                        buf, max);
+                                        if (code <= 0)
+                                                break;
+                                        code = min(code, (int) max);
+                                        buf += code;
+                                        max -= code;
+                                } else if (hw_ep == musb->bulk_ep
+                                                && !list_empty(
+                                                        &musb->out_bulk)) {
+                                        code = dump_queue(&musb->out_bulk,
+                                                        buf, max);
+                                        if (code <= 0)
+                                                break;
+                                        code = min(code, (int) max);
+                                        buf += code;
+                                        max -= code;
+                                } else if (musb->periodic[epnum]) {
+                                        code = dump_qh(musb->periodic[epnum],
+                                                        buf, max);
+                                        if (code <= 0)
+                                                break;
+                                        code = min(code, (int) max);
+                                        buf += code;
+                                        max -= code;
+                                }
+                        }
+                }
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+                if (is_peripheral_active(musb)) {
+                        code = 0;
+
+                        if (hw_ep->ep_in.desc || !epnum) {
+                                code = dump_ep(&hw_ep->ep_in, buf, max);
+                                if (code <= 0)
+                                        break;
+                                code = min(code, (int) max);
+                                buf += code;
+                                max -= code;
+                        }
+                        if (hw_ep->ep_out.desc) {
+                                code = dump_ep(&hw_ep->ep_out, buf, max);
+                                if (code <= 0)
+                                        break;
+                                code = min(code, (int) max);
+                                buf += code;
+                                max -= code;
+                        }
+                }
+#endif
+        } while (0);
+
+        return buf - aBuffer;
+}
+
+/* Dump the current status and compile options.
+ * @param musb the device driver instance
+ * @param buffer where to dump the status; it must be big enough to hold the
+ * result otherwise "BAD THINGS HAPPENS(TM)".
+ */
+static int dump_header_stats(struct musb *musb, char *buffer)
+{
+        int code, count = 0;
+        const void __iomem *mbase = musb->mregs;
+
+        *buffer = 0;
+        count = sprintf(buffer, "Status: %sHDRC, Mode=%s "
+                                "(Power=%02x, DevCtl=%02x)\n",
+                        (musb->is_multipoint ? "M" : ""), MUSB_MODE(musb),
+                        musb_readb(mbase, MUSB_POWER),
+                        musb_readb(mbase, MUSB_DEVCTL));
+        if (count <= 0)
+                return 0;
+        buffer += count;
+
+        code = sprintf(buffer, "OTG state: %s; %sactive\n",
+                        otg_state_string(musb),
+                        musb->is_active ? "" : "in");
+        if (code <= 0)
+                goto done;
+        buffer += code;
+        count += code;
+
+        code = sprintf(buffer,
+                        "Options: "
+#ifdef CONFIG_MUSB_PIO_ONLY
+                        "pio"
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+                        "cppi-dma"
+#elif defined(CONFIG_USB_INVENTRA_DMA)
+                        "musb-dma"
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+                        "tusb-omap-dma"
+#else
+                        "?dma?"
+#endif
+                        ", "
+#ifdef CONFIG_USB_MUSB_OTG
+                        "otg (peripheral+host)"
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+                        "peripheral"
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+                        "host"
+#endif
+                        ", debug=%d [eps=%d]\n",
+                debug,
+                musb->nr_endpoints);
+        if (code <= 0)
+                goto done;
+        count += code;
+        buffer += code;
+
+#ifdef  CONFIG_USB_GADGET_MUSB_HDRC
+        code = sprintf(buffer, "Peripheral address: %02x\n",
+                        musb_readb(musb->ctrl_base, MUSB_FADDR));
+        if (code <= 0)
+                goto done;
+        buffer += code;
+        count += code;
+#endif
+
+#ifdef  CONFIG_USB_MUSB_HDRC_HCD
+        code = sprintf(buffer, "Root port status: %08x\n",
+                        musb->port1_status);
+        if (code <= 0)
+                goto done;
+        buffer += code;
+        count += code;
+#endif
+
+#ifdef  CONFIG_ARCH_DAVINCI
+        code = sprintf(buffer,
+                        "DaVinci: ctrl=%02x stat=%1x phy=%03x\n"
+                        "\trndis=%05x auto=%04x intsrc=%08x intmsk=%08x"
+                        "\n",
+                        musb_readl(musb->ctrl_base, DAVINCI_USB_CTRL_REG),
+                        musb_readl(musb->ctrl_base, DAVINCI_USB_STAT_REG),
+                        __raw_readl((void __force __iomem *)
+                                        IO_ADDRESS(USBPHY_CTL_PADDR)),
+                        musb_readl(musb->ctrl_base, DAVINCI_RNDIS_REG),
+                        musb_readl(musb->ctrl_base, DAVINCI_AUTOREQ_REG),
+                        musb_readl(musb->ctrl_base,
+                                        DAVINCI_USB_INT_SOURCE_REG),
+                        musb_readl(musb->ctrl_base,
+                                        DAVINCI_USB_INT_MASK_REG));
+        if (code <= 0)
+                goto done;
+        count += code;
+        buffer += code;
+#endif  /* DAVINCI */
+
+#ifdef CONFIG_USB_TUSB6010
+        code = sprintf(buffer,
+                        "TUSB6010: devconf %08x, phy enable %08x drive %08x"
+                        "\n\totg %03x timer %08x"
+                        "\n\tprcm conf %08x mgmt %08x; int src %08x mask %08x"
+                        "\n",
+                        musb_readl(musb->ctrl_base, TUSB_DEV_CONF),
+                        musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL_ENABLE),
+                        musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL),
+                        musb_readl(musb->ctrl_base, TUSB_DEV_OTG_STAT),
+                        musb_readl(musb->ctrl_base, TUSB_DEV_OTG_TIMER),
+                        musb_readl(musb->ctrl_base, TUSB_PRCM_CONF),
+                        musb_readl(musb->ctrl_base, TUSB_PRCM_MNGMT),
+                        musb_readl(musb->ctrl_base, TUSB_INT_SRC),
+                        musb_readl(musb->ctrl_base, TUSB_INT_MASK));
+        if (code <= 0)
+                goto done;
+        count += code;
+        buffer += code;
+#endif  /* DAVINCI */
+
+        if (is_cppi_enabled() && musb->dma_controller) {
+                code = sprintf(buffer,
+                                "CPPI: txcr=%d txsrc=%01x txena=%01x; "
+                                "rxcr=%d rxsrc=%01x rxena=%01x "
+                                "\n",
+                                musb_readl(musb->ctrl_base,
+                                                DAVINCI_TXCPPI_CTRL_REG),
+                                musb_readl(musb->ctrl_base,
+                                                DAVINCI_TXCPPI_RAW_REG),
+                                musb_readl(musb->ctrl_base,
+                                                DAVINCI_TXCPPI_INTENAB_REG),
+                                musb_readl(musb->ctrl_base,
+                                                DAVINCI_RXCPPI_CTRL_REG),
+                                musb_readl(musb->ctrl_base,
+                                                DAVINCI_RXCPPI_RAW_REG),
+                                musb_readl(musb->ctrl_base,
+                                                DAVINCI_RXCPPI_INTENAB_REG));
+                if (code <= 0)
+                        goto done;
+                count += code;
+                buffer += code;
+        }
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+        if (is_peripheral_enabled(musb)) {
+                code = sprintf(buffer, "Gadget driver: %s\n",
+                                musb->gadget_driver
+                                        ? musb->gadget_driver->driver.name
+                                        : "(none)");
+                if (code <= 0)
+                        goto done;
+                count += code;
+                buffer += code;
+        }
+#endif
+
+done:
+        return count;
+}
+
+/* Write to ProcFS
+ *
+ * C soft-connect
+ * c soft-disconnect
+ * I enable HS
+ * i disable HS
+ * s stop session
+ * F force session (OTG-unfriendly)
+ * E rElinquish bus (OTG)
+ * H request host mode
+ * h cancel host request
+ * T start sending TEST_PACKET
+ * D<num> set/query the debug level
+ */
+static int musb_proc_write(struct file *file, const char __user *buffer,
+                        unsigned long count, void *data)
+{
+        char cmd;
+        u8 reg;
+        struct musb *musb = (struct musb *)data;
+        void __iomem *mbase = musb->mregs;
+
+        /* MOD_INC_USE_COUNT; */
+
+        if (unlikely(copy_from_user(&cmd, buffer, 1)))
+                return -EFAULT;
+
+        switch (cmd) {
+        case 'C':
+                if (mbase) {
+                        reg = musb_readb(mbase, MUSB_POWER)
+                                        | MUSB_POWER_SOFTCONN;
+                        musb_writeb(mbase, MUSB_POWER, reg);
+                }
+                break;
+
+        case 'c':
+                if (mbase) {
+                        reg = musb_readb(mbase, MUSB_POWER)
+                                        & ~MUSB_POWER_SOFTCONN;
+                        musb_writeb(mbase, MUSB_POWER, reg);
+                }
+                break;
+
+        case 'I':
+                if (mbase) {
+                        reg = musb_readb(mbase, MUSB_POWER)
+                                        | MUSB_POWER_HSENAB;
+                        musb_writeb(mbase, MUSB_POWER, reg);
+                }
+                break;
+
+        case 'i':
+                if (mbase) {
+                        reg = musb_readb(mbase, MUSB_POWER)
+                                        & ~MUSB_POWER_HSENAB;
+                        musb_writeb(mbase, MUSB_POWER, reg);
+                }
+                break;
+
+        case 'F':
+                reg = musb_readb(mbase, MUSB_DEVCTL);
+                reg |= MUSB_DEVCTL_SESSION;
+                musb_writeb(mbase, MUSB_DEVCTL, reg);
+                break;
+
+        case 'H':
+                if (mbase) {
+                        reg = musb_readb(mbase, MUSB_DEVCTL);
+                        reg |= MUSB_DEVCTL_HR;
+                        musb_writeb(mbase, MUSB_DEVCTL, reg);
+                        /* MUSB_HST_MODE( ((struct musb*)data) ); */
+                        /* WARNING("Host Mode\n"); */
+                }
+                break;
+
+        case 'h':
+                if (mbase) {
+                        reg = musb_readb(mbase, MUSB_DEVCTL);
+                        reg &= ~MUSB_DEVCTL_HR;
+                        musb_writeb(mbase, MUSB_DEVCTL, reg);
+                }
+                break;
+
+        case 'T':
+                if (mbase) {
+                        musb_load_testpacket(musb);
+                        musb_writeb(mbase, MUSB_TESTMODE,
+                                        MUSB_TEST_PACKET);
+                }
+                break;
+
+#if (MUSB_DEBUG > 0)
+                /* set/read debug level */
+        case 'D':{
+                        if (count > 1) {
+                                char digits[8], *p = digits;
+                                int i = 0, level = 0, sign = 1;
+                                int len = min(count - 1, (unsigned long)8);
+
+                                if (copy_from_user(&digits, &buffer[1], len))
+                                        return -EFAULT;
+
+                                /* optional sign */
+                                if (*p == '-') {
+                                        len -= 1;
+                                        sign = -sign;
+                                        p++;
+                                }
+
+                                /* read it */
+                                while (i++ < len && *p > '0' && *p < '9') {
+                                        level = level * 10 + (*p - '0');
+                                        p++;
+                                }
+
+                                level *= sign;
+                                DBG(1, "debug level %d\n", level);
+                                debug = level;
+                        }
+                }
+                break;
+
+
+        case '?':
+                INFO("?: you are seeing it\n");
+                INFO("C/c: soft connect enable/disable\n");
+                INFO("I/i: hispeed enable/disable\n");
+                INFO("F: force session start\n");
+                INFO("H: host mode\n");
+                INFO("T: start sending TEST_PACKET\n");
+                INFO("D: set/read dbug level\n");
+                break;
+#endif
+
+        default:
+                ERR("Command %c not implemented\n", cmd);
+                break;
+        }
+
+        musb_platform_try_idle(musb, 0);
+
+        return count;
+}
+
+static int musb_proc_read(char *page, char **start,
+                        off_t off, int count, int *eof, void *data)
+{
+        char *buffer = page;
+        int code = 0;
+        unsigned long   flags;
+        struct musb     *musb = data;
+        unsigned        epnum;
+
+        count -= off;
+        count -= 1;             /* for NUL at end */
+        if (count <= 0)
+                return -EINVAL;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        code = dump_header_stats(musb, buffer);
+        if (code > 0) {
+                buffer += code;
+                count -= code;
+        }
+
+        /* generate the report for the end points */
+        /* REVISIT ... not unless something's connected! */
+        for (epnum = 0; count >= 0 && epnum < musb->nr_endpoints;
+                        epnum++) {
+                code = dump_end_info(musb, epnum, buffer, count);
+                if (code > 0) {
+                        buffer += code;
+                        count -= code;
+                }
+        }
+
+        musb_platform_try_idle(musb, 0);
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+        *eof = 1;
+
+        return buffer - page;
+}
+
+void __devexit musb_debug_delete(char *name, struct musb *musb)
+{
+        if (musb->proc_entry)
+                remove_proc_entry(name, NULL);
+}
+
+struct proc_dir_entry *__init
+musb_debug_create(char *name, struct musb *data)
+{
+        struct proc_dir_entry   *pde;
+
+        /* FIXME convert everything to seq_file; then later, debugfs */
+
+        if (!name)
+                return NULL;
+
+        pde = create_proc_entry(name, S_IFREG | S_IRUGO | S_IWUSR, NULL);
+        data->proc_entry = pde;
+        if (pde) {
+                pde->data = data;
+                /* pde->owner = THIS_MODULE; */
+
+                pde->read_proc = musb_proc_read;
+                pde->write_proc = musb_proc_write;
+
+                pde->size = 0;
+
+                pr_debug("Registered /proc/%s\n", name);
+        } else {
+                pr_debug("Cannot create a valid proc file entry");
+        }
+
+        return pde;
+}
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
new file mode 100644
index 000000000000..9c228661aa5a
--- /dev/null
+++ b/drivers/usb/musb/musb_regs.h
@@ -0,0 +1,300 @@
+/*
+ * MUSB OTG driver register defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_REGS_H__
+#define __MUSB_REGS_H__
+
+#define MUSB_EP0_FIFOSIZE       64      /* This is non-configurable */
+
+/*
+ * Common USB registers
+ */
+
+#define MUSB_FADDR              0x00    /* 8-bit */
+#define MUSB_POWER              0x01    /* 8-bit */
+
+#define MUSB_INTRTX             0x02    /* 16-bit */
+#define MUSB_INTRRX             0x04
+#define MUSB_INTRTXE            0x06
+#define MUSB_INTRRXE            0x08
+#define MUSB_INTRUSB            0x0A    /* 8 bit */
+#define MUSB_INTRUSBE           0x0B    /* 8 bit */
+#define MUSB_FRAME              0x0C
+#define MUSB_INDEX              0x0E    /* 8 bit */
+#define MUSB_TESTMODE           0x0F    /* 8 bit */
+
+/* Get offset for a given FIFO from musb->mregs */
+#ifdef  CONFIG_USB_TUSB6010
+#define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20))
+#else
+#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
+#endif
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL             0x60    /* 8 bit */
+
+/* These are always controlled through the INDEX register */
+#define MUSB_TXFIFOSZ           0x62    /* 8-bit (see masks) */
+#define MUSB_RXFIFOSZ           0x63    /* 8-bit (see masks) */
+#define MUSB_TXFIFOADD          0x64    /* 16-bit offset shifted right 3 */
+#define MUSB_RXFIFOADD          0x66    /* 16-bit offset shifted right 3 */
+
+/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
+#define MUSB_HWVERS             0x6C    /* 8 bit */
+
+#define MUSB_EPINFO             0x78    /* 8 bit */
+#define MUSB_RAMINFO            0x79    /* 8 bit */
+#define MUSB_LINKINFO           0x7a    /* 8 bit */
+#define MUSB_VPLEN              0x7b    /* 8 bit */
+#define MUSB_HS_EOF1            0x7c    /* 8 bit */
+#define MUSB_FS_EOF1            0x7d    /* 8 bit */
+#define MUSB_LS_EOF1            0x7e    /* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP             0x00
+#define MUSB_TXCSR              0x02
+#define MUSB_CSR0               MUSB_TXCSR      /* Re-used for EP0 */
+#define MUSB_RXMAXP             0x04
+#define MUSB_RXCSR              0x06
+#define MUSB_RXCOUNT            0x08
+#define MUSB_COUNT0             MUSB_RXCOUNT    /* Re-used for EP0 */
+#define MUSB_TXTYPE             0x0A
+#define MUSB_TYPE0              MUSB_TXTYPE     /* Re-used for EP0 */
+#define MUSB_TXINTERVAL         0x0B
+#define MUSB_NAKLIMIT0          MUSB_TXINTERVAL /* Re-used for EP0 */
+#define MUSB_RXTYPE             0x0C
+#define MUSB_RXINTERVAL         0x0D
+#define MUSB_FIFOSIZE           0x0F
+#define MUSB_CONFIGDATA         MUSB_FIFOSIZE   /* Re-used for EP0 */
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_INDEXED_OFFSET(_epnum, _offset)    \
+        (0x10 + (_offset))
+
+/* Offsets to endpoint registers in flat models */
+#define MUSB_FLAT_OFFSET(_epnum, _offset)       \
+        (0x100 + (0x10*(_epnum)) + (_offset))
+
+#ifdef CONFIG_USB_TUSB6010
+/* TUSB6010 EP0 configuration register is special */
+#define MUSB_TUSB_OFFSET(_epnum, _offset)       \
+        (0x10 + _offset)
+#include "tusb6010.h"           /* Needed "only" for TUSB_EP0_CONF */
+#endif
+
+/* "bus control"/target registers, for host side multipoint (external hubs) */
+#define MUSB_TXFUNCADDR         0x00
+#define MUSB_TXHUBADDR          0x02
+#define MUSB_TXHUBPORT          0x03
+
+#define MUSB_RXFUNCADDR         0x04
+#define MUSB_RXHUBADDR          0x06
+#define MUSB_RXHUBPORT          0x07
+
+#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
+        (0x80 + (8*(_epnum)) + (_offset))
+
+/*
+ * MUSB Register bits
+ */
+
+/* POWER */
+#define MUSB_POWER_ISOUPDATE    0x80
+#define MUSB_POWER_SOFTCONN     0x40
+#define MUSB_POWER_HSENAB       0x20
+#define MUSB_POWER_HSMODE       0x10
+#define MUSB_POWER_RESET        0x08
+#define MUSB_POWER_RESUME       0x04
+#define MUSB_POWER_SUSPENDM     0x02
+#define MUSB_POWER_ENSUSPEND    0x01
+
+/* INTRUSB */
+#define MUSB_INTR_SUSPEND       0x01
+#define MUSB_INTR_RESUME        0x02
+#define MUSB_INTR_RESET         0x04
+#define MUSB_INTR_BABBLE        0x04
+#define MUSB_INTR_SOF           0x08
+#define MUSB_INTR_CONNECT       0x10
+#define MUSB_INTR_DISCONNECT    0x20
+#define MUSB_INTR_SESSREQ       0x40
+#define MUSB_INTR_VBUSERROR     0x80    /* For SESSION end */
+
+/* DEVCTL */
+#define MUSB_DEVCTL_BDEVICE     0x80
+#define MUSB_DEVCTL_FSDEV       0x40
+#define MUSB_DEVCTL_LSDEV       0x20
+#define MUSB_DEVCTL_VBUS        0x18
+#define MUSB_DEVCTL_VBUS_SHIFT  3
+#define MUSB_DEVCTL_HM          0x04
+#define MUSB_DEVCTL_HR          0x02
+#define MUSB_DEVCTL_SESSION     0x01
+
+/* TESTMODE */
+#define MUSB_TEST_FORCE_HOST    0x80
+#define MUSB_TEST_FIFO_ACCESS   0x40
+#define MUSB_TEST_FORCE_FS      0x20
+#define MUSB_TEST_FORCE_HS      0x10
+#define MUSB_TEST_PACKET        0x08
+#define MUSB_TEST_K             0x04
+#define MUSB_TEST_J             0x02
+#define MUSB_TEST_SE0_NAK       0x01
+
+/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
+#define MUSB_FIFOSZ_DPB 0x10
+/* Allocation size (8, 16, 32, ... 4096) */
+#define MUSB_FIFOSZ_SIZE        0x0f
+
+/* CSR0 */
+#define MUSB_CSR0_FLUSHFIFO     0x0100
+#define MUSB_CSR0_TXPKTRDY      0x0002
+#define MUSB_CSR0_RXPKTRDY      0x0001
+
+/* CSR0 in Peripheral mode */
+#define MUSB_CSR0_P_SVDSETUPEND 0x0080
+#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
+#define MUSB_CSR0_P_SENDSTALL   0x0020
+#define MUSB_CSR0_P_SETUPEND    0x0010
+#define MUSB_CSR0_P_DATAEND     0x0008
+#define MUSB_CSR0_P_SENTSTALL   0x0004
+
+/* CSR0 in Host mode */
+#define MUSB_CSR0_H_DIS_PING            0x0800
+#define MUSB_CSR0_H_WR_DATATOGGLE       0x0400  /* Set to allow setting: */
+#define MUSB_CSR0_H_DATATOGGLE          0x0200  /* Data toggle control */
+#define MUSB_CSR0_H_NAKTIMEOUT          0x0080
+#define MUSB_CSR0_H_STATUSPKT           0x0040
+#define MUSB_CSR0_H_REQPKT              0x0020
+#define MUSB_CSR0_H_ERROR               0x0010
+#define MUSB_CSR0_H_SETUPPKT            0x0008
+#define MUSB_CSR0_H_RXSTALL             0x0004
+
+/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_CSR0_P_WZC_BITS    \
+        (MUSB_CSR0_P_SENTSTALL)
+#define MUSB_CSR0_H_WZC_BITS    \
+        (MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
+        | MUSB_CSR0_RXPKTRDY)
+
+/* TxType/RxType */
+#define MUSB_TYPE_SPEED         0xc0
+#define MUSB_TYPE_SPEED_SHIFT   6
+#define MUSB_TYPE_PROTO         0x30    /* Implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO_SHIFT   4
+#define MUSB_TYPE_REMOTE_END    0xf     /* Implicitly zero for ep0 */
+
+/* CONFIGDATA */
+#define MUSB_CONFIGDATA_MPRXE           0x80    /* Auto bulk pkt combining */
+#define MUSB_CONFIGDATA_MPTXE           0x40    /* Auto bulk pkt splitting */
+#define MUSB_CONFIGDATA_BIGENDIAN       0x20
+#define MUSB_CONFIGDATA_HBRXE           0x10    /* HB-ISO for RX */
+#define MUSB_CONFIGDATA_HBTXE           0x08    /* HB-ISO for TX */
+#define MUSB_CONFIGDATA_DYNFIFO         0x04    /* Dynamic FIFO sizing */
+#define MUSB_CONFIGDATA_SOFTCONE        0x02    /* SoftConnect */
+#define MUSB_CONFIGDATA_UTMIDW          0x01    /* Data width 0/1 => 8/16bits */
+
+/* TXCSR in Peripheral and Host mode */
+#define MUSB_TXCSR_AUTOSET              0x8000
+#define MUSB_TXCSR_MODE                 0x2000
+#define MUSB_TXCSR_DMAENAB              0x1000
+#define MUSB_TXCSR_FRCDATATOG           0x0800
+#define MUSB_TXCSR_DMAMODE              0x0400
+#define MUSB_TXCSR_CLRDATATOG           0x0040
+#define MUSB_TXCSR_FLUSHFIFO            0x0008
+#define MUSB_TXCSR_FIFONOTEMPTY         0x0002
+#define MUSB_TXCSR_TXPKTRDY             0x0001
+
+/* TXCSR in Peripheral mode */
+#define MUSB_TXCSR_P_ISO                0x4000
+#define MUSB_TXCSR_P_INCOMPTX           0x0080
+#define MUSB_TXCSR_P_SENTSTALL          0x0020
+#define MUSB_TXCSR_P_SENDSTALL          0x0010
+#define MUSB_TXCSR_P_UNDERRUN           0x0004
+
+/* TXCSR in Host mode */
+#define MUSB_TXCSR_H_WR_DATATOGGLE      0x0200
+#define MUSB_TXCSR_H_DATATOGGLE         0x0100
+#define MUSB_TXCSR_H_NAKTIMEOUT         0x0080
+#define MUSB_TXCSR_H_RXSTALL            0x0020
+#define MUSB_TXCSR_H_ERROR              0x0004
+
+/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_TXCSR_P_WZC_BITS   \
+        (MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
+        | MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
+#define MUSB_TXCSR_H_WZC_BITS   \
+        (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+        | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
+/* RXCSR in Peripheral and Host mode */
+#define MUSB_RXCSR_AUTOCLEAR            0x8000
+#define MUSB_RXCSR_DMAENAB              0x2000
+#define MUSB_RXCSR_DISNYET              0x1000
+#define MUSB_RXCSR_PID_ERR              0x1000
+#define MUSB_RXCSR_DMAMODE              0x0800
+#define MUSB_RXCSR_INCOMPRX             0x0100
+#define MUSB_RXCSR_CLRDATATOG           0x0080
+#define MUSB_RXCSR_FLUSHFIFO            0x0010
+#define MUSB_RXCSR_DATAERROR            0x0008
+#define MUSB_RXCSR_FIFOFULL             0x0002
+#define MUSB_RXCSR_RXPKTRDY             0x0001
+
+/* RXCSR in Peripheral mode */
+#define MUSB_RXCSR_P_ISO                0x4000
+#define MUSB_RXCSR_P_SENTSTALL          0x0040
+#define MUSB_RXCSR_P_SENDSTALL          0x0020
+#define MUSB_RXCSR_P_OVERRUN            0x0004
+
+/* RXCSR in Host mode */
+#define MUSB_RXCSR_H_AUTOREQ            0x4000
+#define MUSB_RXCSR_H_WR_DATATOGGLE      0x0400
+#define MUSB_RXCSR_H_DATATOGGLE         0x0200
+#define MUSB_RXCSR_H_RXSTALL            0x0040
+#define MUSB_RXCSR_H_REQPKT             0x0020
+#define MUSB_RXCSR_H_ERROR              0x0004
+
+/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_RXCSR_P_WZC_BITS   \
+        (MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
+        | MUSB_RXCSR_RXPKTRDY)
+#define MUSB_RXCSR_H_WZC_BITS   \
+        (MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
+        | MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
+
+/* HUBADDR */
+#define MUSB_HUBADDR_MULTI_TT           0x80
+
+#endif  /* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
new file mode 100644
index 000000000000..e0e9ce584175
--- /dev/null
+++ b/drivers/usb/musb/musb_virthub.c
@@ -0,0 +1,425 @@
+/*
+ * MUSB OTG driver virtual root hub support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#include <asm/unaligned.h>
+
+#include "musb_core.h"
+
+
+static void musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+        u8              power;
+        void __iomem    *mbase = musb->mregs;
+
+        if (!is_host_active(musb))
+                return;
+
+        /* NOTE:  this doesn't necessarily put PHY into low power mode,
+         * turning off its clock; that's a function of PHY integration and
+         * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
+         * SE0 changing to connect (J) or wakeup (K) states.
+         */
+        power = musb_readb(mbase, MUSB_POWER);
+        if (do_suspend) {
+                int retries = 10000;
+
+                power &= ~MUSB_POWER_RESUME;
+                power |= MUSB_POWER_SUSPENDM;
+                musb_writeb(mbase, MUSB_POWER, power);
+
+                /* Needed for OPT A tests */
+                power = musb_readb(mbase, MUSB_POWER);
+                while (power & MUSB_POWER_SUSPENDM) {
+                        power = musb_readb(mbase, MUSB_POWER);
+                        if (retries-- < 1)
+                                break;
+                }
+
+                DBG(3, "Root port suspended, power %02x\n", power);
+
+                musb->port1_status |= USB_PORT_STAT_SUSPEND;
+                switch (musb->xceiv.state) {
+                case OTG_STATE_A_HOST:
+                        musb->xceiv.state = OTG_STATE_A_SUSPEND;
+                        musb->is_active = is_otg_enabled(musb)
+                                        && musb->xceiv.host->b_hnp_enable;
+                        musb_platform_try_idle(musb, 0);
+                        break;
+#ifdef  CONFIG_USB_MUSB_OTG
+                case OTG_STATE_B_HOST:
+                        musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+                        musb->is_active = is_otg_enabled(musb)
+                                        && musb->xceiv.host->b_hnp_enable;
+                        musb_platform_try_idle(musb, 0);
+                        break;
+#endif
+                default:
+                        DBG(1, "bogus rh suspend? %s\n",
+                                otg_state_string(musb));
+                }
+        } else if (power & MUSB_POWER_SUSPENDM) {
+                power &= ~MUSB_POWER_SUSPENDM;
+                power |= MUSB_POWER_RESUME;
+                musb_writeb(mbase, MUSB_POWER, power);
+
+                DBG(3, "Root port resuming, power %02x\n", power);
+
+                /* later, GetPortStatus will stop RESUME signaling */
+                musb->port1_status |= MUSB_PORT_STAT_RESUME;
+                musb->rh_timer = jiffies + msecs_to_jiffies(20);
+        }
+}
+
+static void musb_port_reset(struct musb *musb, bool do_reset)
+{
+        u8              power;
+        void __iomem    *mbase = musb->mregs;
+
+#ifdef CONFIG_USB_MUSB_OTG
+        if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+                DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
+                musb->port1_status &= ~USB_PORT_STAT_RESET;
+                return;
+        }
+#endif
+
+        if (!is_host_active(musb))
+                return;
+
+        /* NOTE:  caller guarantees it will turn off the reset when
+         * the appropriate amount of time has passed
+         */
+        power = musb_readb(mbase, MUSB_POWER);
+        if (do_reset) {
+
+                /*
+                 * If RESUME is set, we must make sure it stays minimum 20 ms.
+                 * Then we must clear RESUME and wait a bit to let musb start
+                 * generating SOFs. If we don't do this, OPT HS A 6.8 tests
+                 * fail with "Error! Did not receive an SOF before suspend
+                 * detected".
+                 */
+                if (power &  MUSB_POWER_RESUME) {
+                        while (time_before(jiffies, musb->rh_timer))
+                                msleep(1);
+                        musb_writeb(mbase, MUSB_POWER,
+                                power & ~MUSB_POWER_RESUME);
+                        msleep(1);
+                }
+
+                musb->ignore_disconnect = true;
+                power &= 0xf0;
+                musb_writeb(mbase, MUSB_POWER,
+                                power | MUSB_POWER_RESET);
+
+                musb->port1_status |= USB_PORT_STAT_RESET;
+                musb->port1_status &= ~USB_PORT_STAT_ENABLE;
+                musb->rh_timer = jiffies + msecs_to_jiffies(50);
+        } else {
+                DBG(4, "root port reset stopped\n");
+                musb_writeb(mbase, MUSB_POWER,
+                                power & ~MUSB_POWER_RESET);
+
+                musb->ignore_disconnect = false;
+
+                power = musb_readb(mbase, MUSB_POWER);
+                if (power & MUSB_POWER_HSMODE) {
+                        DBG(4, "high-speed device connected\n");
+                        musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
+                }
+
+                musb->port1_status &= ~USB_PORT_STAT_RESET;
+                musb->port1_status |= USB_PORT_STAT_ENABLE
+                                        | (USB_PORT_STAT_C_RESET << 16)
+                                        | (USB_PORT_STAT_C_ENABLE << 16);
+                usb_hcd_poll_rh_status(musb_to_hcd(musb));
+
+                musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+        }
+}
+
+void musb_root_disconnect(struct musb *musb)
+{
+        musb->port1_status = (1 << USB_PORT_FEAT_POWER)
+                        | (1 << USB_PORT_FEAT_C_CONNECTION);
+
+        usb_hcd_poll_rh_status(musb_to_hcd(musb));
+        musb->is_active = 0;
+
+        switch (musb->xceiv.state) {
+        case OTG_STATE_A_HOST:
+        case OTG_STATE_A_SUSPEND:
+                musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+                musb->is_active = 0;
+                break;
+        case OTG_STATE_A_WAIT_VFALL:
+                musb->xceiv.state = OTG_STATE_B_IDLE;
+                break;
+        default:
+                DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
+        }
+}
+
+
+/*---------------------------------------------------------------------*/
+
+/* Caller may or may not hold musb->lock */
+int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+        struct musb     *musb = hcd_to_musb(hcd);
+        int             retval = 0;
+
+        /* called in_irq() via usb_hcd_poll_rh_status() */
+        if (musb->port1_status & 0xffff0000) {
+                *buf = 0x02;
+                retval = 1;
+        }
+        return retval;
+}
+
+int musb_hub_control(
+        struct usb_hcd  *hcd,
+        u16             typeReq,
+        u16             wValue,
+        u16             wIndex,
+        char            *buf,
+        u16             wLength)
+{
+        struct musb     *musb = hcd_to_musb(hcd);
+        u32             temp;
+        int             retval = 0;
+        unsigned long   flags;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+                spin_unlock_irqrestore(&musb->lock, flags);
+                return -ESHUTDOWN;
+        }
+
+        /* hub features:  always zero, setting is a NOP
+         * port features: reported, sometimes updated when host is active
+         * no indicators
+         */
+        switch (typeReq) {
+        case ClearHubFeature:
+        case SetHubFeature:
+                switch (wValue) {
+                case C_HUB_OVER_CURRENT:
+                case C_HUB_LOCAL_POWER:
+                        break;
+                default:
+                        goto error;
+                }
+                break;
+        case ClearPortFeature:
+                if ((wIndex & 0xff) != 1)
+                        goto error;
+
+                switch (wValue) {
+                case USB_PORT_FEAT_ENABLE:
+                        break;
+                case USB_PORT_FEAT_SUSPEND:
+                        musb_port_suspend(musb, false);
+                        break;
+                case USB_PORT_FEAT_POWER:
+                        if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+                                musb_set_vbus(musb, 0);
+                        break;
+                case USB_PORT_FEAT_C_CONNECTION:
+                case USB_PORT_FEAT_C_ENABLE:
+                case USB_PORT_FEAT_C_OVER_CURRENT:
+                case USB_PORT_FEAT_C_RESET:
+                case USB_PORT_FEAT_C_SUSPEND:
+                        break;
+                default:
+                        goto error;
+                }
+                DBG(5, "clear feature %d\n", wValue);
+                musb->port1_status &= ~(1 << wValue);
+                break;
+        case GetHubDescriptor:
+                {
+                struct usb_hub_descriptor *desc = (void *)buf;
+
+                desc->bDescLength = 9;
+                desc->bDescriptorType = 0x29;
+                desc->bNbrPorts = 1;
+                desc->wHubCharacteristics = __constant_cpu_to_le16(
+                                  0x0001        /* per-port power switching */
+                                | 0x0010        /* no overcurrent reporting */
+                                );
+                desc->bPwrOn2PwrGood = 5;       /* msec/2 */
+                desc->bHubContrCurrent = 0;
+
+                /* workaround bogus struct definition */
+                desc->DeviceRemovable[0] = 0x02;        /* port 1 */
+                desc->DeviceRemovable[1] = 0xff;
+                }
+                break;
+        case GetHubStatus:
+                temp = 0;
+                *(__le32 *) buf = cpu_to_le32(temp);
+                break;
+        case GetPortStatus:
+                if (wIndex != 1)
+                        goto error;
+
+                /* finish RESET signaling? */
+                if ((musb->port1_status & USB_PORT_STAT_RESET)
+                                && time_after_eq(jiffies, musb->rh_timer))
+                        musb_port_reset(musb, false);
+
+                /* finish RESUME signaling? */
+                if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
+                                && time_after_eq(jiffies, musb->rh_timer)) {
+                        u8              power;
+
+                        power = musb_readb(musb->mregs, MUSB_POWER);
+                        power &= ~MUSB_POWER_RESUME;
+                        DBG(4, "root port resume stopped, power %02x\n",
+                                        power);
+                        musb_writeb(musb->mregs, MUSB_POWER, power);
+
+                        /* ISSUE:  DaVinci (RTL 1.300) disconnects after
+                         * resume of high speed peripherals (but not full
+                         * speed ones).
+                         */
+
+                        musb->is_active = 1;
+                        musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+                                        | MUSB_PORT_STAT_RESUME);
+                        musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+                        usb_hcd_poll_rh_status(musb_to_hcd(musb));
+                        /* NOTE: it might really be A_WAIT_BCON ... */
+                        musb->xceiv.state = OTG_STATE_A_HOST;
+                }
+
+                put_unaligned(cpu_to_le32(musb->port1_status
+                                        & ~MUSB_PORT_STAT_RESUME),
+                                (__le32 *) buf);
+
+                /* port change status is more interesting */
+                DBG(get_unaligned((u16 *)(buf+2)) ? 2 : 5, "port status %08x\n",
+                                musb->port1_status);
+                break;
+        case SetPortFeature:
+                if ((wIndex & 0xff) != 1)
+                        goto error;
+
+                switch (wValue) {
+                case USB_PORT_FEAT_POWER:
+                        /* NOTE: this controller has a strange state machine
+                         * that involves "requesting sessions" according to
+                         * magic side effects from incompletely-described
+                         * rules about startup...
+                         *
+                         * This call is what really starts the host mode; be
+                         * very careful about side effects if you reorder any
+                         * initialization logic, e.g. for OTG, or change any
+                         * logic relating to VBUS power-up.
+                         */
+                        if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+                                musb_start(musb);
+                        break;
+                case USB_PORT_FEAT_RESET:
+                        musb_port_reset(musb, true);
+                        break;
+                case USB_PORT_FEAT_SUSPEND:
+                        musb_port_suspend(musb, true);
+                        break;
+                case USB_PORT_FEAT_TEST:
+                        if (unlikely(is_host_active(musb)))
+                                goto error;
+
+                        wIndex >>= 8;
+                        switch (wIndex) {
+                        case 1:
+                                pr_debug("TEST_J\n");
+                                temp = MUSB_TEST_J;
+                                break;
+                        case 2:
+                                pr_debug("TEST_K\n");
+                                temp = MUSB_TEST_K;
+                                break;
+                        case 3:
+                                pr_debug("TEST_SE0_NAK\n");
+                                temp = MUSB_TEST_SE0_NAK;
+                                break;
+                        case 4:
+                                pr_debug("TEST_PACKET\n");
+                                temp = MUSB_TEST_PACKET;
+                                musb_load_testpacket(musb);
+                                break;
+                        case 5:
+                                pr_debug("TEST_FORCE_ENABLE\n");
+                                temp = MUSB_TEST_FORCE_HOST
+                                        | MUSB_TEST_FORCE_HS;
+
+                                musb_writeb(musb->mregs, MUSB_DEVCTL,
+                                                MUSB_DEVCTL_SESSION);
+                                break;
+                        case 6:
+                                pr_debug("TEST_FIFO_ACCESS\n");
+                                temp = MUSB_TEST_FIFO_ACCESS;
+                                break;
+                        default:
+                                goto error;
+                        }
+                        musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
+                        break;
+                default:
+                        goto error;
+                }
+                DBG(5, "set feature %d\n", wValue);
+                musb->port1_status |= 1 << wValue;
+                break;
+
+        default:
+error:
+                /* "protocol stall" on error */
+                retval = -EPIPE;
+        }
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return retval;
+}
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
new file mode 100644
index 000000000000..9ba8fb7fcd24
--- /dev/null
+++ b/drivers/usb/musb/musbhsdma.c
@@ -0,0 +1,433 @@
+/*
+ * MUSB OTG driver - support for Mentor's DMA controller
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2007 by Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include "musb_core.h"
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include "omap2430.h"
+#endif
+
+#define MUSB_HSDMA_BASE         0x200
+#define MUSB_HSDMA_INTR         (MUSB_HSDMA_BASE + 0)
+#define MUSB_HSDMA_CONTROL              0x4
+#define MUSB_HSDMA_ADDRESS              0x8
+#define MUSB_HSDMA_COUNT                0xc
+
+#define MUSB_HSDMA_CHANNEL_OFFSET(_bChannel, _offset)           \
+                (MUSB_HSDMA_BASE + (_bChannel << 4) + _offset)
+
+/* control register (16-bit): */
+#define MUSB_HSDMA_ENABLE_SHIFT         0
+#define MUSB_HSDMA_TRANSMIT_SHIFT               1
+#define MUSB_HSDMA_MODE1_SHIFT          2
+#define MUSB_HSDMA_IRQENABLE_SHIFT              3
+#define MUSB_HSDMA_ENDPOINT_SHIFT               4
+#define MUSB_HSDMA_BUSERROR_SHIFT               8
+#define MUSB_HSDMA_BURSTMODE_SHIFT              9
+#define MUSB_HSDMA_BURSTMODE            (3 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_UNSPEC     0
+#define MUSB_HSDMA_BURSTMODE_INCR4      1
+#define MUSB_HSDMA_BURSTMODE_INCR8      2
+#define MUSB_HSDMA_BURSTMODE_INCR16     3
+
+#define MUSB_HSDMA_CHANNELS             8
+
+struct musb_dma_controller;
+
+struct musb_dma_channel {
+        struct dma_channel              Channel;
+        struct musb_dma_controller      *controller;
+        u32                             dwStartAddress;
+        u32                             len;
+        u16                             wMaxPacketSize;
+        u8                              bIndex;
+        u8                              epnum;
+        u8                              transmit;
+};
+
+struct musb_dma_controller {
+        struct dma_controller           Controller;
+        struct musb_dma_channel         aChannel[MUSB_HSDMA_CHANNELS];
+        void                            *pDmaPrivate;
+        void __iomem                    *pCoreBase;
+        u8                              bChannelCount;
+        u8                              bmUsedChannels;
+        u8                              irq;
+};
+
+static int dma_controller_start(struct dma_controller *c)
+{
+        /* nothing to do */
+        return 0;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel);
+
+static int dma_controller_stop(struct dma_controller *c)
+{
+        struct musb_dma_controller *controller =
+                container_of(c, struct musb_dma_controller, Controller);
+        struct musb *musb = (struct musb *) controller->pDmaPrivate;
+        struct dma_channel *pChannel;
+        u8 bBit;
+
+        if (controller->bmUsedChannels != 0) {
+                dev_err(musb->controller,
+                        "Stopping DMA controller while channel active\n");
+
+                for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+                        if (controller->bmUsedChannels & (1 << bBit)) {
+                                pChannel = &controller->aChannel[bBit].Channel;
+                                dma_channel_release(pChannel);
+
+                                if (!controller->bmUsedChannels)
+                                        break;
+                        }
+                }
+        }
+        return 0;
+}
+
+static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
+                                struct musb_hw_ep *hw_ep, u8 transmit)
+{
+        u8 bBit;
+        struct dma_channel *pChannel = NULL;
+        struct musb_dma_channel *pImplChannel = NULL;
+        struct musb_dma_controller *controller =
+                        container_of(c, struct musb_dma_controller, Controller);
+
+        for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+                if (!(controller->bmUsedChannels & (1 << bBit))) {
+                        controller->bmUsedChannels |= (1 << bBit);
+                        pImplChannel = &(controller->aChannel[bBit]);
+                        pImplChannel->controller = controller;
+                        pImplChannel->bIndex = bBit;
+                        pImplChannel->epnum = hw_ep->epnum;
+                        pImplChannel->transmit = transmit;
+                        pChannel = &(pImplChannel->Channel);
+                        pChannel->private_data = pImplChannel;
+                        pChannel->status = MUSB_DMA_STATUS_FREE;
+                        pChannel->max_len = 0x10000;
+                        /* Tx => mode 1; Rx => mode 0 */
+                        pChannel->desired_mode = transmit;
+                        pChannel->actual_len = 0;
+                        break;
+                }
+        }
+        return pChannel;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel)
+{
+        struct musb_dma_channel *pImplChannel =
+                (struct musb_dma_channel *) pChannel->private_data;
+
+        pChannel->actual_len = 0;
+        pImplChannel->dwStartAddress = 0;
+        pImplChannel->len = 0;
+
+        pImplChannel->controller->bmUsedChannels &=
+                ~(1 << pImplChannel->bIndex);
+
+        pChannel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+static void configure_channel(struct dma_channel *pChannel,
+                                u16 packet_sz, u8 mode,
+                                dma_addr_t dma_addr, u32 len)
+{
+        struct musb_dma_channel *pImplChannel =
+                (struct musb_dma_channel *) pChannel->private_data;
+        struct musb_dma_controller *controller = pImplChannel->controller;
+        void __iomem *mbase = controller->pCoreBase;
+        u8 bChannel = pImplChannel->bIndex;
+        u16 csr = 0;
+
+        DBG(4, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
+                        pChannel, packet_sz, dma_addr, len, mode);
+
+        if (mode) {
+                csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
+                BUG_ON(len < packet_sz);
+
+                if (packet_sz >= 64) {
+                        csr |= MUSB_HSDMA_BURSTMODE_INCR16
+                                        << MUSB_HSDMA_BURSTMODE_SHIFT;
+                } else if (packet_sz >= 32) {
+                        csr |= MUSB_HSDMA_BURSTMODE_INCR8
+                                        << MUSB_HSDMA_BURSTMODE_SHIFT;
+                } else if (packet_sz >= 16) {
+                        csr |= MUSB_HSDMA_BURSTMODE_INCR4
+                                        << MUSB_HSDMA_BURSTMODE_SHIFT;
+                }
+        }
+
+        csr |= (pImplChannel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
+                | (1 << MUSB_HSDMA_ENABLE_SHIFT)
+                | (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
+                | (pImplChannel->transmit
+                                ? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
+                                : 0);
+
+        /* address/count */
+        musb_writel(mbase,
+                MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+                dma_addr);
+        musb_writel(mbase,
+                MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+                len);
+
+        /* control (this should start things) */
+        musb_writew(mbase,
+                MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+                csr);
+}
+
+static int dma_channel_program(struct dma_channel *pChannel,
+                                u16 packet_sz, u8 mode,
+                                dma_addr_t dma_addr, u32 len)
+{
+        struct musb_dma_channel *pImplChannel =
+                        (struct musb_dma_channel *) pChannel->private_data;
+
+        DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
+                pImplChannel->epnum,
+                pImplChannel->transmit ? "Tx" : "Rx",
+                packet_sz, dma_addr, len, mode);
+
+        BUG_ON(pChannel->status == MUSB_DMA_STATUS_UNKNOWN ||
+                pChannel->status == MUSB_DMA_STATUS_BUSY);
+
+        pChannel->actual_len = 0;
+        pImplChannel->dwStartAddress = dma_addr;
+        pImplChannel->len = len;
+        pImplChannel->wMaxPacketSize = packet_sz;
+        pChannel->status = MUSB_DMA_STATUS_BUSY;
+
+        if ((mode == 1) && (len >= packet_sz))
+                configure_channel(pChannel, packet_sz, 1, dma_addr, len);
+        else
+                configure_channel(pChannel, packet_sz, 0, dma_addr, len);
+
+        return true;
+}
+
+static int dma_channel_abort(struct dma_channel *pChannel)
+{
+        struct musb_dma_channel *pImplChannel =
+                (struct musb_dma_channel *) pChannel->private_data;
+        u8 bChannel = pImplChannel->bIndex;
+        void __iomem *mbase = pImplChannel->controller->pCoreBase;
+        u16 csr;
+
+        if (pChannel->status == MUSB_DMA_STATUS_BUSY) {
+                if (pImplChannel->transmit) {
+
+                        csr = musb_readw(mbase,
+                                MUSB_EP_OFFSET(pImplChannel->epnum,
+                                                MUSB_TXCSR));
+                        csr &= ~(MUSB_TXCSR_AUTOSET |
+                                 MUSB_TXCSR_DMAENAB |
+                                 MUSB_TXCSR_DMAMODE);
+                        musb_writew(mbase,
+                                MUSB_EP_OFFSET(pImplChannel->epnum,
+                                                MUSB_TXCSR),
+                                csr);
+                } else {
+                        csr = musb_readw(mbase,
+                                MUSB_EP_OFFSET(pImplChannel->epnum,
+                                                MUSB_RXCSR));
+                        csr &= ~(MUSB_RXCSR_AUTOCLEAR |
+                                 MUSB_RXCSR_DMAENAB |
+                                 MUSB_RXCSR_DMAMODE);
+                        musb_writew(mbase,
+                                MUSB_EP_OFFSET(pImplChannel->epnum,
+                                                MUSB_RXCSR),
+                                csr);
+                }
+
+                musb_writew(mbase,
+                        MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+                        0);
+                musb_writel(mbase,
+                        MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+                        0);
+                musb_writel(mbase,
+                        MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+                        0);
+
+                pChannel->status = MUSB_DMA_STATUS_FREE;
+        }
+        return 0;
+}
+
+static irqreturn_t dma_controller_irq(int irq, void *private_data)
+{
+        struct musb_dma_controller *controller =
+                (struct musb_dma_controller *)private_data;
+        struct musb_dma_channel *pImplChannel;
+        struct musb *musb = controller->pDmaPrivate;
+        void __iomem *mbase = controller->pCoreBase;
+        struct dma_channel *pChannel;
+        u8 bChannel;
+        u16 csr;
+        u32 dwAddress;
+        u8 int_hsdma;
+        irqreturn_t retval = IRQ_NONE;
+        unsigned long flags;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
+        if (!int_hsdma)
+                goto done;
+
+        for (bChannel = 0; bChannel < MUSB_HSDMA_CHANNELS; bChannel++) {
+                if (int_hsdma & (1 << bChannel)) {
+                        pImplChannel = (struct musb_dma_channel *)
+                                        &(controller->aChannel[bChannel]);
+                        pChannel = &pImplChannel->Channel;
+
+                        csr = musb_readw(mbase,
+                                        MUSB_HSDMA_CHANNEL_OFFSET(bChannel,
+                                                        MUSB_HSDMA_CONTROL));
+
+                        if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT))
+                                pImplChannel->Channel.status =
+                                        MUSB_DMA_STATUS_BUS_ABORT;
+                        else {
+                                u8 devctl;
+
+                                dwAddress = musb_readl(mbase,
+                                                MUSB_HSDMA_CHANNEL_OFFSET(
+                                                        bChannel,
+                                                        MUSB_HSDMA_ADDRESS));
+                                pChannel->actual_len = dwAddress
+                                        - pImplChannel->dwStartAddress;
+
+                                DBG(2, "ch %p, 0x%x -> 0x%x (%d / %d) %s\n",
+                                        pChannel, pImplChannel->dwStartAddress,
+                                        dwAddress, pChannel->actual_len,
+                                        pImplChannel->len,
+                                        (pChannel->actual_len
+                                                < pImplChannel->len) ?
+                                        "=> reconfig 0" : "=> complete");
+
+                                devctl = musb_readb(mbase, MUSB_DEVCTL);
+
+                                pChannel->status = MUSB_DMA_STATUS_FREE;
+
+                                /* completed */
+                                if ((devctl & MUSB_DEVCTL_HM)
+                                        && (pImplChannel->transmit)
+                                        && ((pChannel->desired_mode == 0)
+                                            || (pChannel->actual_len &
+                                            (pImplChannel->wMaxPacketSize - 1)))
+                                         ) {
+                                        /* Send out the packet */
+                                        musb_ep_select(mbase,
+                                                pImplChannel->epnum);
+                                        musb_writew(mbase, MUSB_EP_OFFSET(
+                                                        pImplChannel->epnum,
+                                                        MUSB_TXCSR),
+                                                MUSB_TXCSR_TXPKTRDY);
+                                } else
+                                        musb_dma_completion(
+                                                musb,
+                                                pImplChannel->epnum,
+                                                pImplChannel->transmit);
+                        }
+                }
+        }
+        retval = IRQ_HANDLED;
+done:
+        spin_unlock_irqrestore(&musb->lock, flags);
+        return retval;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+        struct musb_dma_controller *controller;
+
+        controller = container_of(c, struct musb_dma_controller, Controller);
+        if (!controller)
+                return;
+
+        if (controller->irq)
+                free_irq(controller->irq, c);
+
+        kfree(controller);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *pCoreBase)
+{
+        struct musb_dma_controller *controller;
+        struct device *dev = musb->controller;
+        struct platform_device *pdev = to_platform_device(dev);
+        int irq = platform_get_irq(pdev, 1);
+
+        if (irq == 0) {
+                dev_err(dev, "No DMA interrupt line!\n");
+                return NULL;
+        }
+
+        controller = kzalloc(sizeof(struct musb_dma_controller), GFP_KERNEL);
+        if (!controller)
+                return NULL;
+
+        controller->bChannelCount = MUSB_HSDMA_CHANNELS;
+        controller->pDmaPrivate = musb;
+        controller->pCoreBase = pCoreBase;
+
+        controller->Controller.start = dma_controller_start;
+        controller->Controller.stop = dma_controller_stop;
+        controller->Controller.channel_alloc = dma_channel_allocate;
+        controller->Controller.channel_release = dma_channel_release;
+        controller->Controller.channel_program = dma_channel_program;
+        controller->Controller.channel_abort = dma_channel_abort;
+
+        if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
+                        musb->controller->bus_id, &controller->Controller)) {
+                dev_err(dev, "request_irq %d failed!\n", irq);
+                dma_controller_destroy(&controller->Controller);
+                return NULL;
+        }
+
+        controller->irq = irq;
+
+        return &controller->Controller;
+}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
new file mode 100644
index 000000000000..298b22e6ad0d
--- /dev/null
+++ b/drivers/usb/musb/omap2430.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright (C) 2005-2007 by Texas Instruments
+ * Some code has been taken from tusb6010.c
+ * Copyrights for that are attributable to:
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+#include "omap2430.h"
+
+#ifdef CONFIG_ARCH_OMAP3430
+#define get_cpu_rev()   2
+#endif
+
+#define MUSB_TIMEOUT_A_WAIT_BCON        1100
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+        struct musb     *musb = (void *)_musb;
+        unsigned long   flags;
+        u8      power;
+        u8      devctl;
+
+        devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        switch (musb->xceiv.state) {
+        case OTG_STATE_A_WAIT_BCON:
+                devctl &= ~MUSB_DEVCTL_SESSION;
+                musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+                devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+                if (devctl & MUSB_DEVCTL_BDEVICE) {
+                        musb->xceiv.state = OTG_STATE_B_IDLE;
+                        MUSB_DEV_MODE(musb);
+                } else {
+                        musb->xceiv.state = OTG_STATE_A_IDLE;
+                        MUSB_HST_MODE(musb);
+                }
+                break;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        case OTG_STATE_A_SUSPEND:
+                /* finish RESUME signaling? */
+                if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
+                        power = musb_readb(musb->mregs, MUSB_POWER);
+                        power &= ~MUSB_POWER_RESUME;
+                        DBG(1, "root port resume stopped, power %02x\n", power);
+                        musb_writeb(musb->mregs, MUSB_POWER, power);
+                        musb->is_active = 1;
+                        musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+                                                | MUSB_PORT_STAT_RESUME);
+                        musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+                        usb_hcd_poll_rh_status(musb_to_hcd(musb));
+                        /* NOTE: it might really be A_WAIT_BCON ... */
+                        musb->xceiv.state = OTG_STATE_A_HOST;
+                }
+                break;
+#endif
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        case OTG_STATE_A_HOST:
+                devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+                if (devctl &  MUSB_DEVCTL_BDEVICE)
+                        musb->xceiv.state = OTG_STATE_B_IDLE;
+                else
+                        musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+#endif
+        default:
+                break;
+        }
+        spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+        unsigned long           default_timeout = jiffies + msecs_to_jiffies(3);
+        static unsigned long    last_timer;
+
+        if (timeout == 0)
+                timeout = default_timeout;
+
+        /* Never idle if active, or when VBUS timeout is not set as host */
+        if (musb->is_active || ((musb->a_wait_bcon == 0)
+                        && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+                DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+                del_timer(&musb_idle_timer);
+                last_timer = jiffies;
+                return;
+        }
+
+        if (time_after(last_timer, timeout)) {
+                if (!timer_pending(&musb_idle_timer))
+                        last_timer = timeout;
+                else {
+                        DBG(4, "Longer idle timer already pending, ignoring\n");
+                        return;
+                }
+        }
+        last_timer = timeout;
+
+        DBG(4, "%s inactive, for idle timer for %lu ms\n",
+                otg_state_string(musb),
+                (unsigned long)jiffies_to_msecs(timeout - jiffies));
+        mod_timer(&musb_idle_timer, timeout);
+}
+
+void musb_platform_enable(struct musb *musb)
+{
+}
+void musb_platform_disable(struct musb *musb)
+{
+}
+static void omap_vbus_power(struct musb *musb, int is_on, int sleeping)
+{
+}
+
+static void omap_set_vbus(struct musb *musb, int is_on)
+{
+        u8              devctl;
+        /* HDRC controls CPEN, but beware current surges during device
+         * connect.  They can trigger transient overcurrent conditions
+         * that must be ignored.
+         */
+
+        devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+        if (is_on) {
+                musb->is_active = 1;
+                musb->xceiv.default_a = 1;
+                musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+                devctl |= MUSB_DEVCTL_SESSION;
+
+                MUSB_HST_MODE(musb);
+        } else {
+                musb->is_active = 0;
+
+                /* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
+                 * jumping right to B_IDLE...
+                 */
+
+                musb->xceiv.default_a = 0;
+                musb->xceiv.state = OTG_STATE_B_IDLE;
+                devctl &= ~MUSB_DEVCTL_SESSION;
+
+                MUSB_DEV_MODE(musb);
+        }
+        musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+        DBG(1, "VBUS %s, devctl %02x "
+                /* otg %3x conf %08x prcm %08x */ "\n",
+                otg_state_string(musb),
+                musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+static int omap_set_power(struct otg_transceiver *x, unsigned mA)
+{
+        return 0;
+}
+
+static int musb_platform_resume(struct musb *musb);
+
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+        u8      devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+        devctl |= MUSB_DEVCTL_SESSION;
+        musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+        switch (musb_mode) {
+        case MUSB_HOST:
+                otg_set_host(&musb->xceiv, musb->xceiv.host);
+                break;
+        case MUSB_PERIPHERAL:
+                otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
+                break;
+        case MUSB_OTG:
+                break;
+        }
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+        u32 l;
+
+#if defined(CONFIG_ARCH_OMAP2430)
+        omap_cfg_reg(AE5_2430_USB0HS_STP);
+#endif
+
+        musb_platform_resume(musb);
+
+        l = omap_readl(OTG_SYSCONFIG);
+        l &= ~ENABLEWAKEUP;     /* disable wakeup */
+        l &= ~NOSTDBY;          /* remove possible nostdby */
+        l |= SMARTSTDBY;        /* enable smart standby */
+        l &= ~AUTOIDLE;         /* disable auto idle */
+        l &= ~NOIDLE;           /* remove possible noidle */
+        l |= SMARTIDLE;         /* enable smart idle */
+        l |= AUTOIDLE;          /* enable auto idle */
+        omap_writel(l, OTG_SYSCONFIG);
+
+        l = omap_readl(OTG_INTERFSEL);
+        l |= ULPI_12PIN;
+        omap_writel(l, OTG_INTERFSEL);
+
+        pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
+                        "sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
+                        omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG),
+                        omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL),
+                        omap_readl(OTG_SIMENABLE));
+
+        omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
+
+        if (is_host_enabled(musb))
+                musb->board_set_vbus = omap_set_vbus;
+        if (is_peripheral_enabled(musb))
+                musb->xceiv.set_power = omap_set_power;
+        musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
+
+        setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+        return 0;
+}
+
+int musb_platform_suspend(struct musb *musb)
+{
+        u32 l;
+
+        if (!musb->clock)
+                return 0;
+
+        /* in any role */
+        l = omap_readl(OTG_FORCESTDBY);
+        l |= ENABLEFORCE;       /* enable MSTANDBY */
+        omap_writel(l, OTG_FORCESTDBY);
+
+        l = omap_readl(OTG_SYSCONFIG);
+        l |= ENABLEWAKEUP;      /* enable wakeup */
+        omap_writel(l, OTG_SYSCONFIG);
+
+        if (musb->xceiv.set_suspend)
+                musb->xceiv.set_suspend(&musb->xceiv, 1);
+
+        if (musb->set_clock)
+                musb->set_clock(musb->clock, 0);
+        else
+                clk_disable(musb->clock);
+
+        return 0;
+}
+
+static int musb_platform_resume(struct musb *musb)
+{
+        u32 l;
+
+        if (!musb->clock)
+                return 0;
+
+        if (musb->xceiv.set_suspend)
+                musb->xceiv.set_suspend(&musb->xceiv, 0);
+
+        if (musb->set_clock)
+                musb->set_clock(musb->clock, 1);
+        else
+                clk_enable(musb->clock);
+
+        l = omap_readl(OTG_SYSCONFIG);
+        l &= ~ENABLEWAKEUP;     /* disable wakeup */
+        omap_writel(l, OTG_SYSCONFIG);
+
+        l = omap_readl(OTG_FORCESTDBY);
+        l &= ~ENABLEFORCE;      /* disable MSTANDBY */
+        omap_writel(l, OTG_FORCESTDBY);
+
+        return 0;
+}
+
+
+int musb_platform_exit(struct musb *musb)
+{
+
+        omap_vbus_power(musb, 0 /*off*/, 1);
+
+        musb_platform_suspend(musb);
+
+        clk_put(musb->clock);
+        musb->clock = 0;
+
+        return 0;
+}
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
new file mode 100644
index 000000000000..786a62071f72
--- /dev/null
+++ b/drivers/usb/musb/omap2430.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_OMAP243X_H__
+#define __MUSB_OMAP243X_H__
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include <asm/arch/hardware.h>
+#include <asm/arch/usb.h>
+
+/*
+ * OMAP2430-specific definitions
+ */
+
+#define MENTOR_BASE_OFFSET      0
+#if     defined(CONFIG_ARCH_OMAP2430)
+#define OMAP_HSOTG_BASE         (OMAP243X_HS_BASE)
+#elif   defined(CONFIG_ARCH_OMAP3430)
+#define OMAP_HSOTG_BASE         (OMAP34XX_HSUSB_OTG_BASE)
+#endif
+#define OMAP_HSOTG(offset)      (OMAP_HSOTG_BASE + 0x400 + (offset))
+#define OTG_REVISION            OMAP_HSOTG(0x0)
+#define OTG_SYSCONFIG           OMAP_HSOTG(0x4)
+#       define  MIDLEMODE       12      /* bit position */
+#       define  FORCESTDBY              (0 << MIDLEMODE)
+#       define  NOSTDBY                 (1 << MIDLEMODE)
+#       define  SMARTSTDBY              (2 << MIDLEMODE)
+#       define  SIDLEMODE               3       /* bit position */
+#       define  FORCEIDLE               (0 << SIDLEMODE)
+#       define  NOIDLE                  (1 << SIDLEMODE)
+#       define  SMARTIDLE               (2 << SIDLEMODE)
+#       define  ENABLEWAKEUP            (1 << 2)
+#       define  SOFTRST                 (1 << 1)
+#       define  AUTOIDLE                (1 << 0)
+#define OTG_SYSSTATUS           OMAP_HSOTG(0x8)
+#       define  RESETDONE               (1 << 0)
+#define OTG_INTERFSEL           OMAP_HSOTG(0xc)
+#       define  EXTCP                   (1 << 2)
+#       define  PHYSEL          0       /* bit position */
+#       define  UTMI_8BIT               (0 << PHYSEL)
+#       define  ULPI_12PIN              (1 << PHYSEL)
+#       define  ULPI_8PIN               (2 << PHYSEL)
+#define OTG_SIMENABLE           OMAP_HSOTG(0x10)
+#       define  TM1                     (1 << 0)
+#define OTG_FORCESTDBY          OMAP_HSOTG(0x14)
+#       define  ENABLEFORCE             (1 << 0)
+
+#endif  /* CONFIG_ARCH_OMAP2430 */
+
+#endif  /* __MUSB_OMAP243X_H__ */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
new file mode 100644
index 000000000000..b73b036f3d77
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.c
@@ -0,0 +1,1151 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Notes:
+ * - Driver assumes that interface to external host (main CPU) is
+ *   configured for NOR FLASH interface instead of VLYNQ serial
+ *   interface.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+static void tusb_source_power(struct musb *musb, int is_on);
+
+#define TUSB_REV_MAJOR(reg_val)         ((reg_val >> 4) & 0xf)
+#define TUSB_REV_MINOR(reg_val)         (reg_val & 0xf)
+
+/*
+ * Checks the revision. We need to use the DMA register as 3.0 does not
+ * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
+ */
+u8 tusb_get_revision(struct musb *musb)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+        u32             die_id;
+        u8              rev;
+
+        rev = musb_readl(tbase, TUSB_DMA_CTRL_REV) & 0xff;
+        if (TUSB_REV_MAJOR(rev) == 3) {
+                die_id = TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase,
+                                TUSB_DIDR1_HI));
+                if (die_id >= TUSB_DIDR1_HI_REV_31)
+                        rev |= 1;
+        }
+
+        return rev;
+}
+
+static int __init tusb_print_revision(struct musb *musb)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+        u8              rev;
+
+        rev = tusb_get_revision(musb);
+
+        pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
+                "prcm",
+                TUSB_REV_MAJOR(musb_readl(tbase, TUSB_PRCM_REV)),
+                TUSB_REV_MINOR(musb_readl(tbase, TUSB_PRCM_REV)),
+                "int",
+                TUSB_REV_MAJOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+                TUSB_REV_MINOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+                "gpio",
+                TUSB_REV_MAJOR(musb_readl(tbase, TUSB_GPIO_REV)),
+                TUSB_REV_MINOR(musb_readl(tbase, TUSB_GPIO_REV)),
+                "dma",
+                TUSB_REV_MAJOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+                TUSB_REV_MINOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+                "dieid",
+                TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
+                "rev",
+                TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
+
+        return tusb_get_revision(musb);
+}
+
+#define WBUS_QUIRK_MASK (TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
+                                | TUSB_PHY_OTG_CTRL_TESTM0)
+
+/*
+ * Workaround for spontaneous WBUS wake-up issue #2 for tusb3.0.
+ * Disables power detection in PHY for the duration of idle.
+ */
+static void tusb_wbus_quirk(struct musb *musb, int enabled)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+        static u32      phy_otg_ctrl, phy_otg_ena;
+        u32             tmp;
+
+        if (enabled) {
+                phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+                phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+                tmp = TUSB_PHY_OTG_CTRL_WRPROTECT
+                                | phy_otg_ena | WBUS_QUIRK_MASK;
+                musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+                tmp = phy_otg_ena & ~WBUS_QUIRK_MASK;
+                tmp |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_TESTM2;
+                musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+                DBG(2, "Enabled tusb wbus quirk ctrl %08x ena %08x\n",
+                        musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+                        musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+        } else if (musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE)
+                                        & TUSB_PHY_OTG_CTRL_TESTM2) {
+                tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl;
+                musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+                tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena;
+                musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+                DBG(2, "Disabled tusb wbus quirk ctrl %08x ena %08x\n",
+                        musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+                        musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+                phy_otg_ctrl = 0;
+                phy_otg_ena = 0;
+        }
+}
+
+/*
+ * TUSB 6010 may use a parallel bus that doesn't support byte ops;
+ * so both loading and unloading FIFOs need explicit byte counts.
+ */
+
+static inline void
+tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len)
+{
+        u32             val;
+        int             i;
+
+        if (len > 4) {
+                for (i = 0; i < (len >> 2); i++) {
+                        memcpy(&val, buf, 4);
+                        musb_writel(fifo, 0, val);
+                        buf += 4;
+                }
+                len %= 4;
+        }
+        if (len > 0) {
+                /* Write the rest 1 - 3 bytes to FIFO */
+                memcpy(&val, buf, len);
+                musb_writel(fifo, 0, val);
+        }
+}
+
+static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
+                                                void __iomem *buf, u16 len)
+{
+        u32             val;
+        int             i;
+
+        if (len > 4) {
+                for (i = 0; i < (len >> 2); i++) {
+                        val = musb_readl(fifo, 0);
+                        memcpy(buf, &val, 4);
+                        buf += 4;
+                }
+                len %= 4;
+        }
+        if (len > 0) {
+                /* Read the rest 1 - 3 bytes from FIFO */
+                val = musb_readl(fifo, 0);
+                memcpy(buf, &val, len);
+        }
+}
+
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
+{
+        void __iomem    *ep_conf = hw_ep->conf;
+        void __iomem    *fifo = hw_ep->fifo;
+        u8              epnum = hw_ep->epnum;
+
+        prefetch(buf);
+
+        DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+                        'T', epnum, fifo, len, buf);
+
+        if (epnum)
+                musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+                        TUSB_EP_CONFIG_XFR_SIZE(len));
+        else
+                musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_DIR_TX |
+                        TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+        if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+                /* Best case is 32bit-aligned destination address */
+                if ((0x02 & (unsigned long) buf) == 0) {
+                        if (len >= 4) {
+                                writesl(fifo, buf, len >> 2);
+                                buf += (len & ~0x03);
+                                len &= 0x03;
+                        }
+                } else {
+                        if (len >= 2) {
+                                u32 val;
+                                int i;
+
+                                /* Cannot use writesw, fifo is 32-bit */
+                                for (i = 0; i < (len >> 2); i++) {
+                                        val = (u32)(*(u16 *)buf);
+                                        buf += 2;
+                                        val |= (*(u16 *)buf) << 16;
+                                        buf += 2;
+                                        musb_writel(fifo, 0, val);
+                                }
+                                len &= 0x03;
+                        }
+                }
+        }
+
+        if (len > 0)
+                tusb_fifo_write_unaligned(fifo, buf, len);
+}
+
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
+{
+        void __iomem    *ep_conf = hw_ep->conf;
+        void __iomem    *fifo = hw_ep->fifo;
+        u8              epnum = hw_ep->epnum;
+
+        DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+                        'R', epnum, fifo, len, buf);
+
+        if (epnum)
+                musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+                        TUSB_EP_CONFIG_XFR_SIZE(len));
+        else
+                musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+        if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+                /* Best case is 32bit-aligned destination address */
+                if ((0x02 & (unsigned long) buf) == 0) {
+                        if (len >= 4) {
+                                readsl(fifo, buf, len >> 2);
+                                buf += (len & ~0x03);
+                                len &= 0x03;
+                        }
+                } else {
+                        if (len >= 2) {
+                                u32 val;
+                                int i;
+
+                                /* Cannot use readsw, fifo is 32-bit */
+                                for (i = 0; i < (len >> 2); i++) {
+                                        val = musb_readl(fifo, 0);
+                                        *(u16 *)buf = (u16)(val & 0xffff);
+                                        buf += 2;
+                                        *(u16 *)buf = (u16)(val >> 16);
+                                        buf += 2;
+                                }
+                                len &= 0x03;
+                        }
+                }
+        }
+
+        if (len > 0)
+                tusb_fifo_read_unaligned(fifo, buf, len);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* This is used by gadget drivers, and OTG transceiver logic, allowing
+ * at most mA current to be drawn from VBUS during a Default-B session
+ * (that is, while VBUS exceeds 4.4V).  In Default-A (including pure host
+ * mode), or low power Default-B sessions, something else supplies power.
+ * Caller must take care of locking.
+ */
+static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
+{
+        struct musb     *musb = container_of(x, struct musb, xceiv);
+        void __iomem    *tbase = musb->ctrl_base;
+        u32             reg;
+
+        /*
+         * Keep clock active when enabled. Note that this is not tied to
+         * drawing VBUS, as with OTG mA can be less than musb->min_power.
+         */
+        if (musb->set_clock) {
+                if (mA)
+                        musb->set_clock(musb->clock, 1);
+                else
+                        musb->set_clock(musb->clock, 0);
+        }
+
+        /* tps65030 seems to consume max 100mA, with maybe 60mA available
+         * (measured on one board) for things other than tps and tusb.
+         *
+         * Boards sharing the CPU clock with CLKIN will need to prevent
+         * certain idle sleep states while the USB link is active.
+         *
+         * REVISIT we could use VBUS to supply only _one_ of { 1.5V, 3.3V }.
+         * The actual current usage would be very board-specific.  For now,
+         * it's simpler to just use an aggregate (also board-specific).
+         */
+        if (x->default_a || mA < (musb->min_power << 1))
+                mA = 0;
+
+        reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+        if (mA) {
+                musb->is_bus_powered = 1;
+                reg |= TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN;
+        } else {
+                musb->is_bus_powered = 0;
+                reg &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+        }
+        musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+        DBG(2, "draw max %d mA VBUS\n", mA);
+        return 0;
+}
+
+#else
+#define tusb_draw_power NULL
+#endif
+
+/* workaround for issue 13:  change clock during chip idle
+ * (to be fixed in rev3 silicon) ... symptoms include disconnect
+ * or looping suspend/resume cycles
+ */
+static void tusb_set_clock_source(struct musb *musb, unsigned mode)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+        u32             reg;
+
+        reg = musb_readl(tbase, TUSB_PRCM_CONF);
+        reg &= ~TUSB_PRCM_CONF_SYS_CLKSEL(0x3);
+
+        /* 0 = refclk (clkin, XI)
+         * 1 = PHY 60 MHz (internal PLL)
+         * 2 = not supported
+         * 3 = what?
+         */
+        if (mode > 0)
+                reg |= TUSB_PRCM_CONF_SYS_CLKSEL(mode & 0x3);
+
+        musb_writel(tbase, TUSB_PRCM_CONF, reg);
+
+        /* FIXME tusb6010_platform_retime(mode == 0); */
+}
+
+/*
+ * Idle TUSB6010 until next wake-up event; NOR access always wakes.
+ * Other code ensures that we idle unless we're connected _and_ the
+ * USB link is not suspended ... and tells us the relevant wakeup
+ * events.  SW_EN for voltage is handled separately.
+ */
+void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+        u32             reg;
+
+        if ((wakeup_enables & TUSB_PRCM_WBUS)
+                        && (tusb_get_revision(musb) == TUSB_REV_30))
+                tusb_wbus_quirk(musb, 1);
+
+        tusb_set_clock_source(musb, 0);
+
+        wakeup_enables |= TUSB_PRCM_WNORCS;
+        musb_writel(tbase, TUSB_PRCM_WAKEUP_MASK, ~wakeup_enables);
+
+        /* REVISIT writeup of WID implies that if WID set and ID is grounded,
+         * TUSB_PHY_OTG_CTRL.TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP must be cleared.
+         * Presumably that's mostly to save power, hence WID is immaterial ...
+         */
+
+        reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+        /* issue 4: when driving vbus, use hipower (vbus_det) comparator */
+        if (is_host_active(musb)) {
+                reg |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+                reg &= ~TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+        } else {
+                reg |= TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+                reg &= ~TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+        }
+        reg |= TUSB_PRCM_MNGMT_PM_IDLE | TUSB_PRCM_MNGMT_DEV_IDLE;
+        musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+        DBG(6, "idle, wake on %02x\n", wakeup_enables);
+}
+
+/*
+ * Updates cable VBUS status. Caller must take care of locking.
+ */
+int musb_platform_get_vbus_status(struct musb *musb)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+        u32             otg_stat, prcm_mngmt;
+        int             ret = 0;
+
+        otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+        prcm_mngmt = musb_readl(tbase, TUSB_PRCM_MNGMT);
+
+        /* Temporarily enable VBUS detection if it was disabled for
+         * suspend mode. Unless it's enabled otg_stat and devctl will
+         * not show correct VBUS state.
+         */
+        if (!(prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN)) {
+                u32 tmp = prcm_mngmt;
+                tmp |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+                musb_writel(tbase, TUSB_PRCM_MNGMT, tmp);
+                otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+                musb_writel(tbase, TUSB_PRCM_MNGMT, prcm_mngmt);
+        }
+
+        if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID)
+                ret = 1;
+
+        return ret;
+}
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+        struct musb     *musb = (void *)_musb;
+        unsigned long   flags;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        switch (musb->xceiv.state) {
+        case OTG_STATE_A_WAIT_BCON:
+                if ((musb->a_wait_bcon != 0)
+                        && (musb->idle_timeout == 0
+                                || time_after(jiffies, musb->idle_timeout))) {
+                        DBG(4, "Nothing connected %s, turning off VBUS\n",
+                                        otg_state_string(musb));
+                }
+                /* FALLTHROUGH */
+        case OTG_STATE_A_IDLE:
+                tusb_source_power(musb, 0);
+        default:
+                break;
+        }
+
+        if (!musb->is_active) {
+                u32     wakeups;
+
+                /* wait until khubd handles port change status */
+                if (is_host_active(musb) && (musb->port1_status >> 16))
+                        goto done;
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+                if (is_peripheral_enabled(musb) && !musb->gadget_driver)
+                        wakeups = 0;
+                else {
+                        wakeups = TUSB_PRCM_WHOSTDISCON
+                                        | TUSB_PRCM_WBUS
+                                        | TUSB_PRCM_WVBUS;
+                        if (is_otg_enabled(musb))
+                                wakeups |= TUSB_PRCM_WID;
+                }
+#else
+                wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS;
+#endif
+                tusb_allow_idle(musb, wakeups);
+        }
+done:
+        spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Maybe put TUSB6010 into idle mode mode depending on USB link status,
+ * like "disconnected" or "suspended".  We'll be woken out of it by
+ * connect, resume, or disconnect.
+ *
+ * Needs to be called as the last function everywhere where there is
+ * register access to TUSB6010 because of NOR flash wake-up.
+ * Caller should own controller spinlock.
+ *
+ * Delay because peripheral enables D+ pullup 3msec after SE0, and
+ * we don't want to treat that full speed J as a wakeup event.
+ * ... peripherals must draw only suspend current after 10 msec.
+ */
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+        unsigned long           default_timeout = jiffies + msecs_to_jiffies(3);
+        static unsigned long    last_timer;
+
+        if (timeout == 0)
+                timeout = default_timeout;
+
+        /* Never idle if active, or when VBUS timeout is not set as host */
+        if (musb->is_active || ((musb->a_wait_bcon == 0)
+                        && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+                DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+                del_timer(&musb_idle_timer);
+                last_timer = jiffies;
+                return;
+        }
+
+        if (time_after(last_timer, timeout)) {
+                if (!timer_pending(&musb_idle_timer))
+                        last_timer = timeout;
+                else {
+                        DBG(4, "Longer idle timer already pending, ignoring\n");
+                        return;
+                }
+        }
+        last_timer = timeout;
+
+        DBG(4, "%s inactive, for idle timer for %lu ms\n",
+                otg_state_string(musb),
+                (unsigned long)jiffies_to_msecs(timeout - jiffies));
+        mod_timer(&musb_idle_timer, timeout);
+}
+
+/* ticks of 60 MHz clock */
+#define DEVCLOCK                60000000
+#define OTG_TIMER_MS(msecs)     ((msecs) \
+                ? (TUSB_DEV_OTG_TIMER_VAL((DEVCLOCK/1000)*(msecs)) \
+                                | TUSB_DEV_OTG_TIMER_ENABLE) \
+                : 0)
+
+static void tusb_source_power(struct musb *musb, int is_on)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+        u32             conf, prcm, timer;
+        u8              devctl;
+
+        /* HDRC controls CPEN, but beware current surges during device
+         * connect.  They can trigger transient overcurrent conditions
+         * that must be ignored.
+         */
+
+        prcm = musb_readl(tbase, TUSB_PRCM_MNGMT);
+        conf = musb_readl(tbase, TUSB_DEV_CONF);
+        devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+        if (is_on) {
+                if (musb->set_clock)
+                        musb->set_clock(musb->clock, 1);
+                timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
+                musb->xceiv.default_a = 1;
+                musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+                devctl |= MUSB_DEVCTL_SESSION;
+
+                conf |= TUSB_DEV_CONF_USB_HOST_MODE;
+                MUSB_HST_MODE(musb);
+        } else {
+                u32     otg_stat;
+
+                timer = 0;
+
+                /* If ID pin is grounded, we want to be a_idle */
+                otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+                if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
+                        switch (musb->xceiv.state) {
+                        case OTG_STATE_A_WAIT_VRISE:
+                        case OTG_STATE_A_WAIT_BCON:
+                                musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+                                break;
+                        case OTG_STATE_A_WAIT_VFALL:
+                                musb->xceiv.state = OTG_STATE_A_IDLE;
+                                break;
+                        default:
+                                musb->xceiv.state = OTG_STATE_A_IDLE;
+                        }
+                        musb->is_active = 0;
+                        musb->xceiv.default_a = 1;
+                        MUSB_HST_MODE(musb);
+                } else {
+                        musb->is_active = 0;
+                        musb->xceiv.default_a = 0;
+                        musb->xceiv.state = OTG_STATE_B_IDLE;
+                        MUSB_DEV_MODE(musb);
+                }
+
+                devctl &= ~MUSB_DEVCTL_SESSION;
+                conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
+                if (musb->set_clock)
+                        musb->set_clock(musb->clock, 0);
+        }
+        prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+
+        musb_writel(tbase, TUSB_PRCM_MNGMT, prcm);
+        musb_writel(tbase, TUSB_DEV_OTG_TIMER, timer);
+        musb_writel(tbase, TUSB_DEV_CONF, conf);
+        musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+        DBG(1, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
+                otg_state_string(musb),
+                musb_readb(musb->mregs, MUSB_DEVCTL),
+                musb_readl(tbase, TUSB_DEV_OTG_STAT),
+                conf, prcm);
+}
+
+/*
+ * Sets the mode to OTG, peripheral or host by changing the ID detection.
+ * Caller must take care of locking.
+ *
+ * Note that if a mini-A cable is plugged in the ID line will stay down as
+ * the weak ID pull-up is not able to pull the ID up.
+ *
+ * REVISIT: It would be possible to add support for changing between host
+ * and peripheral modes in non-OTG configurations by reconfiguring hardware
+ * and then setting musb->board_mode. For now, only support OTG mode.
+ */
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+        u32             otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
+
+        if (musb->board_mode != MUSB_OTG) {
+                ERR("Changing mode currently only supported in OTG mode\n");
+                return;
+        }
+
+        otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+        phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+        phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+        dev_conf = musb_readl(tbase, TUSB_DEV_CONF);
+
+        switch (musb_mode) {
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+        case MUSB_HOST:         /* Disable PHY ID detect, ground ID */
+                phy_otg_ctrl &= ~TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+                phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+                dev_conf |= TUSB_DEV_CONF_ID_SEL;
+                dev_conf &= ~TUSB_DEV_CONF_SOFT_ID;
+                break;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+        case MUSB_PERIPHERAL:   /* Disable PHY ID detect, keep ID pull-up on */
+                phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+                phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+                dev_conf |= (TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+                break;
+#endif
+
+#ifdef CONFIG_USB_MUSB_OTG
+        case MUSB_OTG:          /* Use PHY ID detection */
+                phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+                phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+                dev_conf &= ~(TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+                break;
+#endif
+
+        default:
+                DBG(2, "Trying to set unknown mode %i\n", musb_mode);
+        }
+
+        musb_writel(tbase, TUSB_PHY_OTG_CTRL,
+                        TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl);
+        musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE,
+                        TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena);
+        musb_writel(tbase, TUSB_DEV_CONF, dev_conf);
+
+        otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+        if ((musb_mode == MUSB_PERIPHERAL) &&
+                !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS))
+                        INFO("Cannot be peripheral with mini-A cable "
+                        "otg_stat: %08x\n", otg_stat);
+}
+
+static inline unsigned long
+tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
+{
+        u32             otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+        unsigned long   idle_timeout = 0;
+
+        /* ID pin */
+        if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
+                int     default_a;
+
+                if (is_otg_enabled(musb))
+                        default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS);
+                else
+                        default_a = is_host_enabled(musb);
+                DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
+                musb->xceiv.default_a = default_a;
+                tusb_source_power(musb, default_a);
+
+                /* Don't allow idling immediately */
+                if (default_a)
+                        idle_timeout = jiffies + (HZ * 3);
+        }
+
+        /* VBUS state change */
+        if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
+
+                /* B-dev state machine:  no vbus ~= disconnect */
+                if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+                                || !is_host_enabled(musb)) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+                        /* ? musb_root_disconnect(musb); */
+                        musb->port1_status &=
+                                ~(USB_PORT_STAT_CONNECTION
+                                | USB_PORT_STAT_ENABLE
+                                | USB_PORT_STAT_LOW_SPEED
+                                | USB_PORT_STAT_HIGH_SPEED
+                                | USB_PORT_STAT_TEST
+                                );
+#endif
+
+                        if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
+                                DBG(1, "Forcing disconnect (no interrupt)\n");
+                                if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+                                        /* INTR_DISCONNECT can hide... */
+                                        musb->xceiv.state = OTG_STATE_B_IDLE;
+                                        musb->int_usb |= MUSB_INTR_DISCONNECT;
+                                }
+                                musb->is_active = 0;
+                        }
+                        DBG(2, "vbus change, %s, otg %03x\n",
+                                otg_state_string(musb), otg_stat);
+                        idle_timeout = jiffies + (1 * HZ);
+                        schedule_work(&musb->irq_work);
+
+                } else /* A-dev state machine */ {
+                        DBG(2, "vbus change, %s, otg %03x\n",
+                                otg_state_string(musb), otg_stat);
+
+                        switch (musb->xceiv.state) {
+                        case OTG_STATE_A_IDLE:
+                                DBG(2, "Got SRP, turning on VBUS\n");
+                                musb_set_vbus(musb, 1);
+
+                                /* CONNECT can wake if a_wait_bcon is set */
+                                if (musb->a_wait_bcon != 0)
+                                        musb->is_active = 0;
+                                else
+                                        musb->is_active = 1;
+
+                                /*
+                                 * OPT FS A TD.4.6 needs few seconds for
+                                 * A_WAIT_VRISE
+                                 */
+                                idle_timeout = jiffies + (2 * HZ);
+
+                                break;
+                        case OTG_STATE_A_WAIT_VRISE:
+                                /* ignore; A-session-valid < VBUS_VALID/2,
+                                 * we monitor this with the timer
+                                 */
+                                break;
+                        case OTG_STATE_A_WAIT_VFALL:
+                                /* REVISIT this irq triggers during short
+                                 * spikes caused by enumeration ...
+                                 */
+                                if (musb->vbuserr_retry) {
+                                        musb->vbuserr_retry--;
+                                        tusb_source_power(musb, 1);
+                                } else {
+                                        musb->vbuserr_retry
+                                                = VBUSERR_RETRY_COUNT;
+                                        tusb_source_power(musb, 0);
+                                }
+                                break;
+                        default:
+                                break;
+                        }
+                }
+        }
+
+        /* OTG timer expiration */
+        if (int_src & TUSB_INT_SRC_OTG_TIMEOUT) {
+                u8      devctl;
+
+                DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
+
+                switch (musb->xceiv.state) {
+                case OTG_STATE_A_WAIT_VRISE:
+                        /* VBUS has probably been valid for a while now,
+                         * but may well have bounced out of range a bit
+                         */
+                        devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+                        if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID) {
+                                if ((devctl & MUSB_DEVCTL_VBUS)
+                                                != MUSB_DEVCTL_VBUS) {
+                                        DBG(2, "devctl %02x\n", devctl);
+                                        break;
+                                }
+                                musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+                                musb->is_active = 0;
+                                idle_timeout = jiffies
+                                        + msecs_to_jiffies(musb->a_wait_bcon);
+                        } else {
+                                /* REVISIT report overcurrent to hub? */
+                                ERR("vbus too slow, devctl %02x\n", devctl);
+                                tusb_source_power(musb, 0);
+                        }
+                        break;
+                case OTG_STATE_A_WAIT_BCON:
+                        if (musb->a_wait_bcon != 0)
+                                idle_timeout = jiffies
+                                        + msecs_to_jiffies(musb->a_wait_bcon);
+                        break;
+                case OTG_STATE_A_SUSPEND:
+                        break;
+                case OTG_STATE_B_WAIT_ACON:
+                        break;
+                default:
+                        break;
+                }
+        }
+        schedule_work(&musb->irq_work);
+
+        return idle_timeout;
+}
+
+static irqreturn_t tusb_interrupt(int irq, void *__hci)
+{
+        struct musb     *musb = __hci;
+        void __iomem    *tbase = musb->ctrl_base;
+        unsigned long   flags, idle_timeout = 0;
+        u32             int_mask, int_src;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        /* Mask all interrupts to allow using both edge and level GPIO irq */
+        int_mask = musb_readl(tbase, TUSB_INT_MASK);
+        musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+
+        int_src = musb_readl(tbase, TUSB_INT_SRC) & ~TUSB_INT_SRC_RESERVED_BITS;
+        DBG(3, "TUSB IRQ %08x\n", int_src);
+
+        musb->int_usb = (u8) int_src;
+
+        /* Acknowledge wake-up source interrupts */
+        if (int_src & TUSB_INT_SRC_DEV_WAKEUP) {
+                u32     reg;
+                u32     i;
+
+                if (tusb_get_revision(musb) == TUSB_REV_30)
+                        tusb_wbus_quirk(musb, 0);
+
+                /* there are issues re-locking the PLL on wakeup ... */
+
+                /* work around issue 8 */
+                for (i = 0xf7f7f7; i > 0xf7f7f7 - 1000; i--) {
+                        musb_writel(tbase, TUSB_SCRATCH_PAD, 0);
+                        musb_writel(tbase, TUSB_SCRATCH_PAD, i);
+                        reg = musb_readl(tbase, TUSB_SCRATCH_PAD);
+                        if (reg == i)
+                                break;
+                        DBG(6, "TUSB NOR not ready\n");
+                }
+
+                /* work around issue 13 (2nd half) */
+                tusb_set_clock_source(musb, 1);
+
+                reg = musb_readl(tbase, TUSB_PRCM_WAKEUP_SOURCE);
+                musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
+                if (reg & ~TUSB_PRCM_WNORCS) {
+                        musb->is_active = 1;
+                        schedule_work(&musb->irq_work);
+                }
+                DBG(3, "wake %sactive %02x\n",
+                                musb->is_active ? "" : "in", reg);
+
+                /* REVISIT host side TUSB_PRCM_WHOSTDISCON, TUSB_PRCM_WBUS */
+        }
+
+        if (int_src & TUSB_INT_SRC_USB_IP_CONN)
+                del_timer(&musb_idle_timer);
+
+        /* OTG state change reports (annoyingly) not issued by Mentor core */
+        if (int_src & (TUSB_INT_SRC_VBUS_SENSE_CHNG
+                                | TUSB_INT_SRC_OTG_TIMEOUT
+                                | TUSB_INT_SRC_ID_STATUS_CHNG))
+                idle_timeout = tusb_otg_ints(musb, int_src, tbase);
+
+        /* TX dma callback must be handled here, RX dma callback is
+         * handled in tusb_omap_dma_cb.
+         */
+        if ((int_src & TUSB_INT_SRC_TXRX_DMA_DONE)) {
+                u32     dma_src = musb_readl(tbase, TUSB_DMA_INT_SRC);
+                u32     real_dma_src = musb_readl(tbase, TUSB_DMA_INT_MASK);
+
+                DBG(3, "DMA IRQ %08x\n", dma_src);
+                real_dma_src = ~real_dma_src & dma_src;
+                if (tusb_dma_omap() && real_dma_src) {
+                        int     tx_source = (real_dma_src & 0xffff);
+                        int     i;
+
+                        for (i = 1; i <= 15; i++) {
+                                if (tx_source & (1 << i)) {
+                                        DBG(3, "completing ep%i %s\n", i, "tx");
+                                        musb_dma_completion(musb, i, 1);
+                                }
+                        }
+                }
+                musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
+        }
+
+        /* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
+        if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
+                u32     musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
+
+                musb_writel(tbase, TUSB_USBIP_INT_CLEAR, musb_src);
+                musb->int_rx = (((musb_src >> 16) & 0xffff) << 1);
+                musb->int_tx = (musb_src & 0xffff);
+        } else {
+                musb->int_rx = 0;
+                musb->int_tx = 0;
+        }
+
+        if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX | 0xff))
+                musb_interrupt(musb);
+
+        /* Acknowledge TUSB interrupts. Clear only non-reserved bits */
+        musb_writel(tbase, TUSB_INT_SRC_CLEAR,
+                int_src & ~TUSB_INT_MASK_RESERVED_BITS);
+
+        musb_platform_try_idle(musb, idle_timeout);
+
+        musb_writel(tbase, TUSB_INT_MASK, int_mask);
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        return IRQ_HANDLED;
+}
+
+static int dma_off;
+
+/*
+ * Enables TUSB6010. Caller must take care of locking.
+ * REVISIT:
+ * - Check what is unnecessary in MGC_HdrcStart()
+ */
+void musb_platform_enable(struct musb *musb)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+
+        /* Setup TUSB6010 main interrupt mask. Enable all interrupts except SOF.
+         * REVISIT: Enable and deal with TUSB_INT_SRC_USB_IP_SOF */
+        musb_writel(tbase, TUSB_INT_MASK, TUSB_INT_SRC_USB_IP_SOF);
+
+        /* Setup TUSB interrupt, disable DMA and GPIO interrupts */
+        musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
+        musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+        musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+        /* Clear all subsystem interrups */
+        musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
+        musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
+        musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
+
+        /* Acknowledge pending interrupt(s) */
+        musb_writel(tbase, TUSB_INT_SRC_CLEAR, ~TUSB_INT_MASK_RESERVED_BITS);
+
+        /* Only 0 clock cycles for minimum interrupt de-assertion time and
+         * interrupt polarity active low seems to work reliably here */
+        musb_writel(tbase, TUSB_INT_CTRL_CONF,
+                        TUSB_INT_CTRL_CONF_INT_RELCYC(0));
+
+        set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
+
+        /* maybe force into the Default-A OTG state machine */
+        if (!(musb_readl(tbase, TUSB_DEV_OTG_STAT)
+                        & TUSB_DEV_OTG_STAT_ID_STATUS))
+                musb_writel(tbase, TUSB_INT_SRC_SET,
+                                TUSB_INT_SRC_ID_STATUS_CHNG);
+
+        if (is_dma_capable() && dma_off)
+                printk(KERN_WARNING "%s %s: dma not reactivated\n",
+                                __FILE__, __func__);
+        else
+                dma_off = 1;
+}
+
+/*
+ * Disables TUSB6010. Caller must take care of locking.
+ */
+void musb_platform_disable(struct musb *musb)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+
+        /* FIXME stop DMA, IRQs, timers, ... */
+
+        /* disable all IRQs */
+        musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+        musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
+        musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+        musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+        del_timer(&musb_idle_timer);
+
+        if (is_dma_capable() && !dma_off) {
+                printk(KERN_WARNING "%s %s: dma still active\n",
+                                __FILE__, __func__);
+                dma_off = 1;
+        }
+}
+
+/*
+ * Sets up TUSB6010 CPU interface specific signals and registers
+ * Note: Settings optimized for OMAP24xx
+ */
+static void __init tusb_setup_cpu_interface(struct musb *musb)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+
+        /*
+         * Disable GPIO[5:0] pullups (used as output DMA requests)
+         * Don't disable GPIO[7:6] as they are needed for wake-up.
+         */
+        musb_writel(tbase, TUSB_PULLUP_1_CTRL, 0x0000003F);
+
+        /* Disable all pullups on NOR IF, DMAREQ0 and DMAREQ1 */
+        musb_writel(tbase, TUSB_PULLUP_2_CTRL, 0x01FFFFFF);
+
+        /* Turn GPIO[5:0] to DMAREQ[5:0] signals */
+        musb_writel(tbase, TUSB_GPIO_CONF, TUSB_GPIO_CONF_DMAREQ(0x3f));
+
+        /* Burst size 16x16 bits, all six DMA requests enabled, DMA request
+         * de-assertion time 2 system clocks p 62 */
+        musb_writel(tbase, TUSB_DMA_REQ_CONF,
+                TUSB_DMA_REQ_CONF_BURST_SIZE(2) |
+                TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) |
+                TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+        /* Set 0 wait count for synchronous burst access */
+        musb_writel(tbase, TUSB_WAIT_COUNT, 1);
+}
+
+static int __init tusb_start(struct musb *musb)
+{
+        void __iomem    *tbase = musb->ctrl_base;
+        int             ret = 0;
+        unsigned long   flags;
+        u32             reg;
+
+        if (musb->board_set_power)
+                ret = musb->board_set_power(1);
+        if (ret != 0) {
+                printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
+                return ret;
+        }
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        if (musb_readl(tbase, TUSB_PROD_TEST_RESET) !=
+                TUSB_PROD_TEST_RESET_VAL) {
+                printk(KERN_ERR "tusb: Unable to detect TUSB6010\n");
+                goto err;
+        }
+
+        ret = tusb_print_revision(musb);
+        if (ret < 2) {
+                printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
+                                ret);
+                goto err;
+        }
+
+        /* The uint bit for "USB non-PDR interrupt enable" has to be 1 when
+         * NOR FLASH interface is used */
+        musb_writel(tbase, TUSB_VLYNQ_CTRL, 8);
+
+        /* Select PHY free running 60MHz as a system clock */
+        tusb_set_clock_source(musb, 1);
+
+        /* VBus valid timer 1us, disable DFT/Debug and VLYNQ clocks for
+         * power saving, enable VBus detect and session end comparators,
+         * enable IDpullup, enable VBus charging */
+        musb_writel(tbase, TUSB_PRCM_MNGMT,
+                TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(0xa) |
+                TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN |
+                TUSB_PRCM_MNGMT_OTG_SESS_END_EN |
+                TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN |
+                TUSB_PRCM_MNGMT_OTG_ID_PULLUP);
+        tusb_setup_cpu_interface(musb);
+
+        /* simplify:  always sense/pullup ID pins, as if in OTG mode */
+        reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+        reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+        musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, reg);
+
+        reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+        reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+        musb_writel(tbase, TUSB_PHY_OTG_CTRL, reg);
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        return 0;
+
+err:
+        spin_unlock_irqrestore(&musb->lock, flags);
+
+        if (musb->board_set_power)
+                musb->board_set_power(0);
+
+        return -ENODEV;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+        struct platform_device  *pdev;
+        struct resource         *mem;
+        void __iomem            *sync;
+        int                     ret;
+
+        pdev = to_platform_device(musb->controller);
+
+        /* dma address for async dma */
+        mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        musb->async = mem->start;
+
+        /* dma address for sync dma */
+        mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+        if (!mem) {
+                pr_debug("no sync dma resource?\n");
+                return -ENODEV;
+        }
+        musb->sync = mem->start;
+
+        sync = ioremap(mem->start, mem->end - mem->start + 1);
+        if (!sync) {
+                pr_debug("ioremap for sync failed\n");
+                return -ENOMEM;
+        }
+        musb->sync_va = sync;
+
+        /* Offsets from base: VLYNQ at 0x000, MUSB regs at 0x400,
+         * FIFOs at 0x600, TUSB at 0x800
+         */
+        musb->mregs += TUSB_BASE_OFFSET;
+
+        ret = tusb_start(musb);
+        if (ret) {
+                printk(KERN_ERR "Could not start tusb6010 (%d)\n",
+                                ret);
+                return -ENODEV;
+        }
+        musb->isr = tusb_interrupt;
+
+        if (is_host_enabled(musb))
+                musb->board_set_vbus = tusb_source_power;
+        if (is_peripheral_enabled(musb))
+                musb->xceiv.set_power = tusb_draw_power;
+
+        setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+        return ret;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+        del_timer_sync(&musb_idle_timer);
+
+        if (musb->board_set_power)
+                musb->board_set_power(0);
+
+        iounmap(musb->sync_va);
+
+        return 0;
+}
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
new file mode 100644
index 000000000000..ab8c96286ce6
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.h
@@ -0,0 +1,233 @@
+/*
+ * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TUSB6010_H__
+#define __TUSB6010_H__
+
+extern u8 tusb_get_revision(struct musb *musb);
+
+#ifdef CONFIG_USB_TUSB6010
+#define musb_in_tusb()                  1
+#else
+#define musb_in_tusb()                  0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()                 1
+#else
+#define tusb_dma_omap()                 0
+#endif
+
+/* VLYNQ control register. 32-bit at offset 0x000 */
+#define TUSB_VLYNQ_CTRL                 0x004
+
+/* Mentor Graphics OTG core registers. 8,- 16- and 32-bit at offset 0x400 */
+#define TUSB_BASE_OFFSET                0x400
+
+/* FIFO registers 32-bit at offset 0x600 */
+#define TUSB_FIFO_BASE                  0x600
+
+/* Device System & Control registers. 32-bit at offset 0x800 */
+#define TUSB_SYS_REG_BASE               0x800
+
+#define TUSB_DEV_CONF                   (TUSB_SYS_REG_BASE + 0x000)
+#define         TUSB_DEV_CONF_USB_HOST_MODE             (1 << 16)
+#define         TUSB_DEV_CONF_PROD_TEST_MODE            (1 << 15)
+#define         TUSB_DEV_CONF_SOFT_ID                   (1 << 1)
+#define         TUSB_DEV_CONF_ID_SEL                    (1 << 0)
+
+#define TUSB_PHY_OTG_CTRL_ENABLE        (TUSB_SYS_REG_BASE + 0x004)
+#define TUSB_PHY_OTG_CTRL               (TUSB_SYS_REG_BASE + 0x008)
+#define         TUSB_PHY_OTG_CTRL_WRPROTECT             (0xa5 << 24)
+#define         TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP         (1 << 23)
+#define         TUSB_PHY_OTG_CTRL_OTG_VBUS_DET_EN       (1 << 19)
+#define         TUSB_PHY_OTG_CTRL_OTG_SESS_END_EN       (1 << 18)
+#define         TUSB_PHY_OTG_CTRL_TESTM2                (1 << 17)
+#define         TUSB_PHY_OTG_CTRL_TESTM1                (1 << 16)
+#define         TUSB_PHY_OTG_CTRL_TESTM0                (1 << 15)
+#define         TUSB_PHY_OTG_CTRL_TX_DATA2              (1 << 14)
+#define         TUSB_PHY_OTG_CTRL_TX_GZ2                (1 << 13)
+#define         TUSB_PHY_OTG_CTRL_TX_ENABLE2            (1 << 12)
+#define         TUSB_PHY_OTG_CTRL_DM_PULLDOWN           (1 << 11)
+#define         TUSB_PHY_OTG_CTRL_DP_PULLDOWN           (1 << 10)
+#define         TUSB_PHY_OTG_CTRL_OSC_EN                (1 << 9)
+#define         TUSB_PHY_OTG_CTRL_PHYREF_CLKSEL(v)      (((v) & 3) << 7)
+#define         TUSB_PHY_OTG_CTRL_PD                    (1 << 6)
+#define         TUSB_PHY_OTG_CTRL_PLL_ON                (1 << 5)
+#define         TUSB_PHY_OTG_CTRL_EXT_RPU               (1 << 4)
+#define         TUSB_PHY_OTG_CTRL_PWR_GOOD              (1 << 3)
+#define         TUSB_PHY_OTG_CTRL_RESET                 (1 << 2)
+#define         TUSB_PHY_OTG_CTRL_SUSPENDM              (1 << 1)
+#define         TUSB_PHY_OTG_CTRL_CLK_MODE              (1 << 0)
+
+/*OTG status register */
+#define TUSB_DEV_OTG_STAT               (TUSB_SYS_REG_BASE + 0x00c)
+#define         TUSB_DEV_OTG_STAT_PWR_CLK_GOOD          (1 << 8)
+#define         TUSB_DEV_OTG_STAT_SESS_END              (1 << 7)
+#define         TUSB_DEV_OTG_STAT_SESS_VALID            (1 << 6)
+#define         TUSB_DEV_OTG_STAT_VBUS_VALID            (1 << 5)
+#define         TUSB_DEV_OTG_STAT_VBUS_SENSE            (1 << 4)
+#define         TUSB_DEV_OTG_STAT_ID_STATUS             (1 << 3)
+#define         TUSB_DEV_OTG_STAT_HOST_DISCON           (1 << 2)
+#define         TUSB_DEV_OTG_STAT_LINE_STATE            (3 << 0)
+#define         TUSB_DEV_OTG_STAT_DP_ENABLE             (1 << 1)
+#define         TUSB_DEV_OTG_STAT_DM_ENABLE             (1 << 0)
+
+#define TUSB_DEV_OTG_TIMER              (TUSB_SYS_REG_BASE + 0x010)
+#       define TUSB_DEV_OTG_TIMER_ENABLE                (1 << 31)
+#       define TUSB_DEV_OTG_TIMER_VAL(v)                ((v) & 0x07ffffff)
+#define TUSB_PRCM_REV                   (TUSB_SYS_REG_BASE + 0x014)
+
+/* PRCM configuration register */
+#define TUSB_PRCM_CONF                  (TUSB_SYS_REG_BASE + 0x018)
+#define         TUSB_PRCM_CONF_SFW_CPEN         (1 << 24)
+#define         TUSB_PRCM_CONF_SYS_CLKSEL(v)    (((v) & 3) << 16)
+
+/* PRCM management register */
+#define TUSB_PRCM_MNGMT                 (TUSB_SYS_REG_BASE + 0x01c)
+#define         TUSB_PRCM_MNGMT_SRP_FIX_TIMER(v)        (((v) & 0xf) << 25)
+#define         TUSB_PRCM_MNGMT_SRP_FIX_EN              (1 << 24)
+#define         TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(v)     (((v) & 0xf) << 20)
+#define         TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN       (1 << 19)
+#define         TUSB_PRCM_MNGMT_DFT_CLK_DIS             (1 << 18)
+#define         TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS           (1 << 17)
+#define         TUSB_PRCM_MNGMT_OTG_SESS_END_EN         (1 << 10)
+#define         TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN         (1 << 9)
+#define         TUSB_PRCM_MNGMT_OTG_ID_PULLUP           (1 << 8)
+#define         TUSB_PRCM_MNGMT_15_SW_EN                (1 << 4)
+#define         TUSB_PRCM_MNGMT_33_SW_EN                (1 << 3)
+#define         TUSB_PRCM_MNGMT_5V_CPEN                 (1 << 2)
+#define         TUSB_PRCM_MNGMT_PM_IDLE                 (1 << 1)
+#define         TUSB_PRCM_MNGMT_DEV_IDLE                (1 << 0)
+
+/* Wake-up source clear and mask registers */
+#define TUSB_PRCM_WAKEUP_SOURCE         (TUSB_SYS_REG_BASE + 0x020)
+#define TUSB_PRCM_WAKEUP_CLEAR          (TUSB_SYS_REG_BASE + 0x028)
+#define TUSB_PRCM_WAKEUP_MASK           (TUSB_SYS_REG_BASE + 0x02c)
+#define         TUSB_PRCM_WAKEUP_RESERVED_BITS  (0xffffe << 13)
+#define         TUSB_PRCM_WGPIO_7       (1 << 12)
+#define         TUSB_PRCM_WGPIO_6       (1 << 11)
+#define         TUSB_PRCM_WGPIO_5       (1 << 10)
+#define         TUSB_PRCM_WGPIO_4       (1 << 9)
+#define         TUSB_PRCM_WGPIO_3       (1 << 8)
+#define         TUSB_PRCM_WGPIO_2       (1 << 7)
+#define         TUSB_PRCM_WGPIO_1       (1 << 6)
+#define         TUSB_PRCM_WGPIO_0       (1 << 5)
+#define         TUSB_PRCM_WHOSTDISCON   (1 << 4)        /* Host disconnect */
+#define         TUSB_PRCM_WBUS          (1 << 3)        /* USB bus resume */
+#define         TUSB_PRCM_WNORCS        (1 << 2)        /* NOR chip select */
+#define         TUSB_PRCM_WVBUS         (1 << 1)        /* OTG PHY VBUS */
+#define         TUSB_PRCM_WID           (1 << 0)        /* OTG PHY ID detect */
+
+#define TUSB_PULLUP_1_CTRL              (TUSB_SYS_REG_BASE + 0x030)
+#define TUSB_PULLUP_2_CTRL              (TUSB_SYS_REG_BASE + 0x034)
+#define TUSB_INT_CTRL_REV               (TUSB_SYS_REG_BASE + 0x038)
+#define TUSB_INT_CTRL_CONF              (TUSB_SYS_REG_BASE + 0x03c)
+#define TUSB_USBIP_INT_SRC              (TUSB_SYS_REG_BASE + 0x040)
+#define TUSB_USBIP_INT_SET              (TUSB_SYS_REG_BASE + 0x044)
+#define TUSB_USBIP_INT_CLEAR            (TUSB_SYS_REG_BASE + 0x048)
+#define TUSB_USBIP_INT_MASK             (TUSB_SYS_REG_BASE + 0x04c)
+#define TUSB_DMA_INT_SRC                (TUSB_SYS_REG_BASE + 0x050)
+#define TUSB_DMA_INT_SET                (TUSB_SYS_REG_BASE + 0x054)
+#define TUSB_DMA_INT_CLEAR              (TUSB_SYS_REG_BASE + 0x058)
+#define TUSB_DMA_INT_MASK               (TUSB_SYS_REG_BASE + 0x05c)
+#define TUSB_GPIO_INT_SRC               (TUSB_SYS_REG_BASE + 0x060)
+#define TUSB_GPIO_INT_SET               (TUSB_SYS_REG_BASE + 0x064)
+#define TUSB_GPIO_INT_CLEAR             (TUSB_SYS_REG_BASE + 0x068)
+#define TUSB_GPIO_INT_MASK              (TUSB_SYS_REG_BASE + 0x06c)
+
+/* NOR flash interrupt source registers */
+#define TUSB_INT_SRC                    (TUSB_SYS_REG_BASE + 0x070)
+#define TUSB_INT_SRC_SET                (TUSB_SYS_REG_BASE + 0x074)
+#define TUSB_INT_SRC_CLEAR              (TUSB_SYS_REG_BASE + 0x078)
+#define TUSB_INT_MASK                   (TUSB_SYS_REG_BASE + 0x07c)
+#define         TUSB_INT_SRC_TXRX_DMA_DONE              (1 << 24)
+#define         TUSB_INT_SRC_USB_IP_CORE                (1 << 17)
+#define         TUSB_INT_SRC_OTG_TIMEOUT                (1 << 16)
+#define         TUSB_INT_SRC_VBUS_SENSE_CHNG            (1 << 15)
+#define         TUSB_INT_SRC_ID_STATUS_CHNG             (1 << 14)
+#define         TUSB_INT_SRC_DEV_WAKEUP                 (1 << 13)
+#define         TUSB_INT_SRC_DEV_READY                  (1 << 12)
+#define         TUSB_INT_SRC_USB_IP_TX                  (1 << 9)
+#define         TUSB_INT_SRC_USB_IP_RX                  (1 << 8)
+#define         TUSB_INT_SRC_USB_IP_VBUS_ERR            (1 << 7)
+#define         TUSB_INT_SRC_USB_IP_VBUS_REQ            (1 << 6)
+#define         TUSB_INT_SRC_USB_IP_DISCON              (1 << 5)
+#define         TUSB_INT_SRC_USB_IP_CONN                (1 << 4)
+#define         TUSB_INT_SRC_USB_IP_SOF                 (1 << 3)
+#define         TUSB_INT_SRC_USB_IP_RST_BABBLE          (1 << 2)
+#define         TUSB_INT_SRC_USB_IP_RESUME              (1 << 1)
+#define         TUSB_INT_SRC_USB_IP_SUSPEND             (1 << 0)
+
+/* NOR flash interrupt registers reserved bits. Must be written as 0 */
+#define         TUSB_INT_MASK_RESERVED_17               (0x3fff << 17)
+#define         TUSB_INT_MASK_RESERVED_13               (1 << 13)
+#define         TUSB_INT_MASK_RESERVED_8                (0xf << 8)
+#define         TUSB_INT_SRC_RESERVED_26                (0x1f << 26)
+#define         TUSB_INT_SRC_RESERVED_18                (0x3f << 18)
+#define         TUSB_INT_SRC_RESERVED_10                (0x03 << 10)
+
+/* Reserved bits for NOR flash interrupt mask and clear register */
+#define         TUSB_INT_MASK_RESERVED_BITS     (TUSB_INT_MASK_RESERVED_17 | \
+                                                TUSB_INT_MASK_RESERVED_13 | \
+                                                TUSB_INT_MASK_RESERVED_8)
+
+/* Reserved bits for NOR flash interrupt status register */
+#define         TUSB_INT_SRC_RESERVED_BITS      (TUSB_INT_SRC_RESERVED_26 | \
+                                                TUSB_INT_SRC_RESERVED_18 | \
+                                                TUSB_INT_SRC_RESERVED_10)
+
+#define TUSB_GPIO_REV                   (TUSB_SYS_REG_BASE + 0x080)
+#define TUSB_GPIO_CONF                  (TUSB_SYS_REG_BASE + 0x084)
+#define TUSB_DMA_CTRL_REV               (TUSB_SYS_REG_BASE + 0x100)
+#define TUSB_DMA_REQ_CONF               (TUSB_SYS_REG_BASE + 0x104)
+#define TUSB_EP0_CONF                   (TUSB_SYS_REG_BASE + 0x108)
+#define TUSB_DMA_EP_MAP                 (TUSB_SYS_REG_BASE + 0x148)
+
+/* Offsets from each ep base register */
+#define TUSB_EP_TX_OFFSET               0x10c   /* EP_IN in docs */
+#define TUSB_EP_RX_OFFSET               0x14c   /* EP_OUT in docs */
+#define TUSB_EP_MAX_PACKET_SIZE_OFFSET  0x188
+
+#define TUSB_WAIT_COUNT                 (TUSB_SYS_REG_BASE + 0x1c8)
+#define TUSB_SCRATCH_PAD                (TUSB_SYS_REG_BASE + 0x1c4)
+#define TUSB_PROD_TEST_RESET            (TUSB_SYS_REG_BASE + 0x1d8)
+
+/* Device System & Control register bitfields */
+#define TUSB_INT_CTRL_CONF_INT_RELCYC(v)        (((v) & 0x7) << 18)
+#define TUSB_INT_CTRL_CONF_INT_POLARITY         (1 << 17)
+#define TUSB_INT_CTRL_CONF_INT_MODE             (1 << 16)
+#define TUSB_GPIO_CONF_DMAREQ(v)                (((v) & 0x3f) << 24)
+#define TUSB_DMA_REQ_CONF_BURST_SIZE(v)         (((v) & 3) << 26)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_EN(v)         (((v) & 0x3f) << 20)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(v)      (((v) & 0xf) << 16)
+#define TUSB_EP0_CONFIG_SW_EN                   (1 << 8)
+#define TUSB_EP0_CONFIG_DIR_TX                  (1 << 7)
+#define TUSB_EP0_CONFIG_XFR_SIZE(v)             ((v) & 0x7f)
+#define TUSB_EP_CONFIG_SW_EN                    (1 << 31)
+#define TUSB_EP_CONFIG_XFR_SIZE(v)              ((v) & 0x7fffffff)
+#define TUSB_PROD_TEST_RESET_VAL                0xa596
+#define TUSB_EP_FIFO(ep)                        (TUSB_FIFO_BASE + (ep) * 0x20)
+
+#define TUSB_DIDR1_LO                           (TUSB_SYS_REG_BASE + 0x1f8)
+#define TUSB_DIDR1_HI                           (TUSB_SYS_REG_BASE + 0x1fc)
+#define         TUSB_DIDR1_HI_CHIP_REV(v)               (((v) >> 17) & 0xf)
+#define                 TUSB_DIDR1_HI_REV_20            0
+#define                 TUSB_DIDR1_HI_REV_30            1
+#define                 TUSB_DIDR1_HI_REV_31            2
+
+#define TUSB_REV_10     0x10
+#define TUSB_REV_20     0x20
+#define TUSB_REV_30     0x30
+#define TUSB_REV_31     0x31
+
+#endif /* __TUSB6010_H__ */
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
new file mode 100644
index 000000000000..52f7f29cebda
--- /dev/null
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -0,0 +1,719 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+
+#define to_chdat(c)             ((struct tusb_omap_dma_ch *)(c)->private_data)
+
+#define MAX_DMAREQ              5       /* REVISIT: Really 6, but req5 not OK */
+
+struct tusb_omap_dma_ch {
+        struct musb             *musb;
+        void __iomem            *tbase;
+        unsigned long           phys_offset;
+        int                     epnum;
+        u8                      tx;
+        struct musb_hw_ep       *hw_ep;
+
+        int                     ch;
+        s8                      dmareq;
+        s8                      sync_dev;
+
+        struct tusb_omap_dma    *tusb_dma;
+
+        void __iomem            *dma_addr;
+
+        u32                     len;
+        u16                     packet_sz;
+        u16                     transfer_packet_sz;
+        u32                     transfer_len;
+        u32                     completed_len;
+};
+
+struct tusb_omap_dma {
+        struct dma_controller           controller;
+        struct musb                     *musb;
+        void __iomem                    *tbase;
+
+        int                             ch;
+        s8                              dmareq;
+        s8                              sync_dev;
+        unsigned                        multichannel:1;
+};
+
+static int tusb_omap_dma_start(struct dma_controller *c)
+{
+        struct tusb_omap_dma    *tusb_dma;
+
+        tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+        /* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+        return 0;
+}
+
+static int tusb_omap_dma_stop(struct dma_controller *c)
+{
+        struct tusb_omap_dma    *tusb_dma;
+
+        tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+        /* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+        return 0;
+}
+
+/*
+ * Allocate dmareq0 to the current channel unless it's already taken
+ */
+static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+        u32             reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+        if (reg != 0) {
+                DBG(3, "ep%i dmareq0 is busy for ep%i\n",
+                        chdat->epnum, reg & 0xf);
+                return -EAGAIN;
+        }
+
+        if (chdat->tx)
+                reg = (1 << 4) | chdat->epnum;
+        else
+                reg = chdat->epnum;
+
+        musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+        return 0;
+}
+
+static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+        u32             reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+        if ((reg & 0xf) != chdat->epnum) {
+                printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n",
+                        chdat->epnum, reg & 0xf);
+                return;
+        }
+        musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0);
+}
+
+/*
+ * See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in
+ * musb_gadget.c.
+ */
+static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+        struct dma_channel      *channel = (struct dma_channel *)data;
+        struct tusb_omap_dma_ch *chdat = to_chdat(channel);
+        struct tusb_omap_dma    *tusb_dma = chdat->tusb_dma;
+        struct musb             *musb = chdat->musb;
+        struct musb_hw_ep       *hw_ep = chdat->hw_ep;
+        void __iomem            *ep_conf = hw_ep->conf;
+        void __iomem            *mbase = musb->mregs;
+        unsigned long           remaining, flags, pio;
+        int                     ch;
+
+        spin_lock_irqsave(&musb->lock, flags);
+
+        if (tusb_dma->multichannel)
+                ch = chdat->ch;
+        else
+                ch = tusb_dma->ch;
+
+        if (ch_status != OMAP_DMA_BLOCK_IRQ)
+                printk(KERN_ERR "TUSB DMA error status: %i\n", ch_status);
+
+        DBG(3, "ep%i %s dma callback ch: %i status: %x\n",
+                chdat->epnum, chdat->tx ? "tx" : "rx",
+                ch, ch_status);
+
+        if (chdat->tx)
+                remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+        else
+                remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+        remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining);
+
+        /* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */
+        if (unlikely(remaining > chdat->transfer_len)) {
+                DBG(2, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n",
+                        chdat->tx ? "tx" : "rx", chdat->ch,
+                        remaining);
+                remaining = 0;
+        }
+
+        channel->actual_len = chdat->transfer_len - remaining;
+        pio = chdat->len - channel->actual_len;
+
+        DBG(3, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
+
+        /* Transfer remaining 1 - 31 bytes */
+        if (pio > 0 && pio < 32) {
+                u8      *buf;
+
+                DBG(3, "Using PIO for remaining %lu bytes\n", pio);
+                buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
+                if (chdat->tx) {
+                        dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+                                        chdat->transfer_len, DMA_TO_DEVICE);
+                        musb_write_fifo(hw_ep, pio, buf);
+                } else {
+                        musb_read_fifo(hw_ep, pio, buf);
+                        dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+                                        chdat->transfer_len, DMA_FROM_DEVICE);
+                }
+                channel->actual_len += pio;
+        }
+
+        if (!tusb_dma->multichannel)
+                tusb_omap_free_shared_dmareq(chdat);
+
+        channel->status = MUSB_DMA_STATUS_FREE;
+
+        /* Handle only RX callbacks here. TX callbacks must be handled based
+         * on the TUSB DMA status interrupt.
+         * REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback
+         * interrupt for RX and TX.
+         */
+        if (!chdat->tx)
+                musb_dma_completion(musb, chdat->epnum, chdat->tx);
+
+        /* We must terminate short tx transfers manually by setting TXPKTRDY.
+         * REVISIT: This same problem may occur with other MUSB dma as well.
+         * Easy to test with g_ether by pinging the MUSB board with ping -s54.
+         */
+        if ((chdat->transfer_len < chdat->packet_sz)
+                        || (chdat->transfer_len % chdat->packet_sz != 0)) {
+                u16     csr;
+
+                if (chdat->tx) {
+                        DBG(3, "terminating short tx packet\n");
+                        musb_ep_select(mbase, chdat->epnum);
+                        csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+                        csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY
+                                | MUSB_TXCSR_P_WZC_BITS;
+                        musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+                }
+        }
+
+        spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
+                                u8 rndis_mode, dma_addr_t dma_addr, u32 len)
+{
+        struct tusb_omap_dma_ch         *chdat = to_chdat(channel);
+        struct tusb_omap_dma            *tusb_dma = chdat->tusb_dma;
+        struct musb                     *musb = chdat->musb;
+        struct musb_hw_ep               *hw_ep = chdat->hw_ep;
+        void __iomem                    *mbase = musb->mregs;
+        void __iomem                    *ep_conf = hw_ep->conf;
+        dma_addr_t                      fifo = hw_ep->fifo_sync;
+        struct omap_dma_channel_params  dma_params;
+        u32                             dma_remaining;
+        int                             src_burst, dst_burst;
+        u16                             csr;
+        int                             ch;
+        s8                              dmareq;
+        s8                              sync_dev;
+
+        if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
+                return false;
+
+        /*
+         * HW issue #10: Async dma will eventually corrupt the XFR_SIZE
+         * register which will cause missed DMA interrupt. We could try to
+         * use a timer for the callback, but it is unsafe as the XFR_SIZE
+         * register is corrupt, and we won't know if the DMA worked.
+         */
+        if (dma_addr & 0x2)
+                return false;
+
+        /*
+         * Because of HW issue #10, it seems like mixing sync DMA and async
+         * PIO access can confuse the DMA. Make sure XFR_SIZE is reset before
+         * using the channel for DMA.
+         */
+        if (chdat->tx)
+                dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+        else
+                dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+        dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining);
+        if (dma_remaining) {
+                DBG(2, "Busy %s dma ch%i, not using: %08x\n",
+                        chdat->tx ? "tx" : "rx", chdat->ch,
+                        dma_remaining);
+                return false;
+        }
+
+        chdat->transfer_len = len & ~0x1f;
+
+        if (len < packet_sz)
+                chdat->transfer_packet_sz = chdat->transfer_len;
+        else
+                chdat->transfer_packet_sz = packet_sz;
+
+        if (tusb_dma->multichannel) {
+                ch = chdat->ch;
+                dmareq = chdat->dmareq;
+                sync_dev = chdat->sync_dev;
+        } else {
+                if (tusb_omap_use_shared_dmareq(chdat) != 0) {
+                        DBG(3, "could not get dma for ep%i\n", chdat->epnum);
+                        return false;
+                }
+                if (tusb_dma->ch < 0) {
+                        /* REVISIT: This should get blocked earlier, happens
+                         * with MSC ErrorRecoveryTest
+                         */
+                        WARN_ON(1);
+                        return false;
+                }
+
+                ch = tusb_dma->ch;
+                dmareq = tusb_dma->dmareq;
+                sync_dev = tusb_dma->sync_dev;
+                omap_set_dma_callback(ch, tusb_omap_dma_cb, channel);
+        }
+
+        chdat->packet_sz = packet_sz;
+        chdat->len = len;
+        channel->actual_len = 0;
+        chdat->dma_addr = (void __iomem *)dma_addr;
+        channel->status = MUSB_DMA_STATUS_BUSY;
+
+        /* Since we're recycling dma areas, we need to clean or invalidate */
+        if (chdat->tx)
+                dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE);
+        else
+                dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE);
+
+        /* Use 16-bit transfer if dma_addr is not 32-bit aligned */
+        if ((dma_addr & 0x3) == 0) {
+                dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
+                dma_params.elem_count = 8;              /* Elements in frame */
+        } else {
+                dma_params.data_type = OMAP_DMA_DATA_TYPE_S16;
+                dma_params.elem_count = 16;             /* Elements in frame */
+                fifo = hw_ep->fifo_async;
+        }
+
+        dma_params.frame_count  = chdat->transfer_len / 32; /* Burst sz frame */
+
+        DBG(3, "ep%i %s dma ch%i dma: %08x len: %u(%u) packet_sz: %i(%i)\n",
+                chdat->epnum, chdat->tx ? "tx" : "rx",
+                ch, dma_addr, chdat->transfer_len, len,
+                chdat->transfer_packet_sz, packet_sz);
+
+        /*
+         * Prepare omap DMA for transfer
+         */
+        if (chdat->tx) {
+                dma_params.src_amode    = OMAP_DMA_AMODE_POST_INC;
+                dma_params.src_start    = (unsigned long)dma_addr;
+                dma_params.src_ei       = 0;
+                dma_params.src_fi       = 0;
+
+                dma_params.dst_amode    = OMAP_DMA_AMODE_DOUBLE_IDX;
+                dma_params.dst_start    = (unsigned long)fifo;
+                dma_params.dst_ei       = 1;
+                dma_params.dst_fi       = -31;  /* Loop 32 byte window */
+
+                dma_params.trigger      = sync_dev;
+                dma_params.sync_mode    = OMAP_DMA_SYNC_FRAME;
+                dma_params.src_or_dst_synch     = 0;    /* Dest sync */
+
+                src_burst = OMAP_DMA_DATA_BURST_16;     /* 16x32 read */
+                dst_burst = OMAP_DMA_DATA_BURST_8;      /* 8x32 write */
+        } else {
+                dma_params.src_amode    = OMAP_DMA_AMODE_DOUBLE_IDX;
+                dma_params.src_start    = (unsigned long)fifo;
+                dma_params.src_ei       = 1;
+                dma_params.src_fi       = -31;  /* Loop 32 byte window */
+
+                dma_params.dst_amode    = OMAP_DMA_AMODE_POST_INC;
+                dma_params.dst_start    = (unsigned long)dma_addr;
+                dma_params.dst_ei       = 0;
+                dma_params.dst_fi       = 0;
+
+                dma_params.trigger      = sync_dev;
+                dma_params.sync_mode    = OMAP_DMA_SYNC_FRAME;
+                dma_params.src_or_dst_synch     = 1;    /* Source sync */
+
+                src_burst = OMAP_DMA_DATA_BURST_8;      /* 8x32 read */
+                dst_burst = OMAP_DMA_DATA_BURST_16;     /* 16x32 write */
+        }
+
+        DBG(3, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n",
+                chdat->epnum, chdat->tx ? "tx" : "rx",
+                (dma_params.data_type == OMAP_DMA_DATA_TYPE_S32) ? 32 : 16,
+                ((dma_addr & 0x3) == 0) ? "sync" : "async",
+                dma_params.src_start, dma_params.dst_start);
+
+        omap_set_dma_params(ch, &dma_params);
+        omap_set_dma_src_burst_mode(ch, src_burst);
+        omap_set_dma_dest_burst_mode(ch, dst_burst);
+        omap_set_dma_write_mode(ch, OMAP_DMA_WRITE_LAST_NON_POSTED);
+
+        /*
+         * Prepare MUSB for DMA transfer
+         */
+        if (chdat->tx) {
+                musb_ep_select(mbase, chdat->epnum);
+                csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+                csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB
+                        | MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+                csr &= ~MUSB_TXCSR_P_UNDERRUN;
+                musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+        } else {
+                musb_ep_select(mbase, chdat->epnum);
+                csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+                csr |= MUSB_RXCSR_DMAENAB;
+                csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE);
+                musb_writew(hw_ep->regs, MUSB_RXCSR,
+                        csr | MUSB_RXCSR_P_WZC_BITS);
+        }
+
+        /*
+         * Start DMA transfer
+         */
+        omap_start_dma(ch);
+
+        if (chdat->tx) {
+                /* Send transfer_packet_sz packets at a time */
+                musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+                        chdat->transfer_packet_sz);
+
+                musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+                        TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+        } else {
+                /* Receive transfer_packet_sz packets at a time */
+                musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+                        chdat->transfer_packet_sz << 16);
+
+                musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+                        TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+        }
+
+        return true;
+}
+
+static int tusb_omap_dma_abort(struct dma_channel *channel)
+{
+        struct tusb_omap_dma_ch *chdat = to_chdat(channel);
+        struct tusb_omap_dma    *tusb_dma = chdat->tusb_dma;
+
+        if (!tusb_dma->multichannel) {
+                if (tusb_dma->ch >= 0) {
+                        omap_stop_dma(tusb_dma->ch);
+                        omap_free_dma(tusb_dma->ch);
+                        tusb_dma->ch = -1;
+                }
+
+                tusb_dma->dmareq = -1;
+                tusb_dma->sync_dev = -1;
+        }
+
+        channel->status = MUSB_DMA_STATUS_FREE;
+
+        return 0;
+}
+
+static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+        u32             reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+        int             i, dmareq_nr = -1;
+
+        const int sync_dev[6] = {
+                OMAP24XX_DMA_EXT_DMAREQ0,
+                OMAP24XX_DMA_EXT_DMAREQ1,
+                OMAP242X_DMA_EXT_DMAREQ2,
+                OMAP242X_DMA_EXT_DMAREQ3,
+                OMAP242X_DMA_EXT_DMAREQ4,
+                OMAP242X_DMA_EXT_DMAREQ5,
+        };
+
+        for (i = 0; i < MAX_DMAREQ; i++) {
+                int cur = (reg & (0xf << (i * 5))) >> (i * 5);
+                if (cur == 0) {
+                        dmareq_nr = i;
+                        break;
+                }
+        }
+
+        if (dmareq_nr == -1)
+                return -EAGAIN;
+
+        reg |= (chdat->epnum << (dmareq_nr * 5));
+        if (chdat->tx)
+                reg |= ((1 << 4) << (dmareq_nr * 5));
+        musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+        chdat->dmareq = dmareq_nr;
+        chdat->sync_dev = sync_dev[chdat->dmareq];
+
+        return 0;
+}
+
+static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+        u32 reg;
+
+        if (!chdat || chdat->dmareq < 0)
+                return;
+
+        reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+        reg &= ~(0x1f << (chdat->dmareq * 5));
+        musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+        chdat->dmareq = -1;
+        chdat->sync_dev = -1;
+}
+
+static struct dma_channel *dma_channel_pool[MAX_DMAREQ];
+
+static struct dma_channel *
+tusb_omap_dma_allocate(struct dma_controller *c,
+                struct musb_hw_ep *hw_ep,
+                u8 tx)
+{
+        int ret, i;
+        const char              *dev_name;
+        struct tusb_omap_dma    *tusb_dma;
+        struct musb             *musb;
+        void __iomem            *tbase;
+        struct dma_channel      *channel = NULL;
+        struct tusb_omap_dma_ch *chdat = NULL;
+        u32                     reg;
+
+        tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+        musb = tusb_dma->musb;
+        tbase = musb->ctrl_base;
+
+        reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+        if (tx)
+                reg &= ~(1 << hw_ep->epnum);
+        else
+                reg &= ~(1 << (hw_ep->epnum + 15));
+        musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+        /* REVISIT: Why does dmareq5 not work? */
+        if (hw_ep->epnum == 0) {
+                DBG(3, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
+                return NULL;
+        }
+
+        for (i = 0; i < MAX_DMAREQ; i++) {
+                struct dma_channel *ch = dma_channel_pool[i];
+                if (ch->status == MUSB_DMA_STATUS_UNKNOWN) {
+                        ch->status = MUSB_DMA_STATUS_FREE;
+                        channel = ch;
+                        chdat = ch->private_data;
+                        break;
+                }
+        }
+
+        if (!channel)
+                return NULL;
+
+        if (tx) {
+                chdat->tx = 1;
+                dev_name = "TUSB transmit";
+        } else {
+                chdat->tx = 0;
+                dev_name = "TUSB receive";
+        }
+
+        chdat->musb = tusb_dma->musb;
+        chdat->tbase = tusb_dma->tbase;
+        chdat->hw_ep = hw_ep;
+        chdat->epnum = hw_ep->epnum;
+        chdat->dmareq = -1;
+        chdat->completed_len = 0;
+        chdat->tusb_dma = tusb_dma;
+
+        channel->max_len = 0x7fffffff;
+        channel->desired_mode = 0;
+        channel->actual_len = 0;
+
+        if (tusb_dma->multichannel) {
+                ret = tusb_omap_dma_allocate_dmareq(chdat);
+                if (ret != 0)
+                        goto free_dmareq;
+
+                ret = omap_request_dma(chdat->sync_dev, dev_name,
+                                tusb_omap_dma_cb, channel, &chdat->ch);
+                if (ret != 0)
+                        goto free_dmareq;
+        } else if (tusb_dma->ch == -1) {
+                tusb_dma->dmareq = 0;
+                tusb_dma->sync_dev = OMAP24XX_DMA_EXT_DMAREQ0;
+
+                /* Callback data gets set later in the shared dmareq case */
+                ret = omap_request_dma(tusb_dma->sync_dev, "TUSB shared",
+                                tusb_omap_dma_cb, NULL, &tusb_dma->ch);
+                if (ret != 0)
+                        goto free_dmareq;
+
+                chdat->dmareq = -1;
+                chdat->ch = -1;
+        }
+
+        DBG(3, "ep%i %s dma: %s dma%i dmareq%i sync%i\n",
+                chdat->epnum,
+                chdat->tx ? "tx" : "rx",
+                chdat->ch >= 0 ? "dedicated" : "shared",
+                chdat->ch >= 0 ? chdat->ch : tusb_dma->ch,
+                chdat->dmareq >= 0 ? chdat->dmareq : tusb_dma->dmareq,
+                chdat->sync_dev >= 0 ? chdat->sync_dev : tusb_dma->sync_dev);
+
+        return channel;
+
+free_dmareq:
+        tusb_omap_dma_free_dmareq(chdat);
+
+        DBG(3, "ep%i: Could not get a DMA channel\n", chdat->epnum);
+        channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+        return NULL;
+}
+
+static void tusb_omap_dma_release(struct dma_channel *channel)
+{
+        struct tusb_omap_dma_ch *chdat = to_chdat(channel);
+        struct musb             *musb = chdat->musb;
+        void __iomem            *tbase = musb->ctrl_base;
+        u32                     reg;
+
+        DBG(3, "ep%i ch%i\n", chdat->epnum, chdat->ch);
+
+        reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+        if (chdat->tx)
+                reg |= (1 << chdat->epnum);
+        else
+                reg |= (1 << (chdat->epnum + 15));
+        musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+        reg = musb_readl(tbase, TUSB_DMA_INT_CLEAR);
+        if (chdat->tx)
+                reg |= (1 << chdat->epnum);
+        else
+                reg |= (1 << (chdat->epnum + 15));
+        musb_writel(tbase, TUSB_DMA_INT_CLEAR, reg);
+
+        channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+        if (chdat->ch >= 0) {
+                omap_stop_dma(chdat->ch);
+                omap_free_dma(chdat->ch);
+                chdat->ch = -1;
+        }
+
+        if (chdat->dmareq >= 0)
+                tusb_omap_dma_free_dmareq(chdat);
+
+        channel = NULL;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+        struct tusb_omap_dma    *tusb_dma;
+        int                     i;
+
+        tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+        for (i = 0; i < MAX_DMAREQ; i++) {
+                struct dma_channel *ch = dma_channel_pool[i];
+                if (ch) {
+                        kfree(ch->private_data);
+                        kfree(ch);
+                }
+        }
+
+        if (!tusb_dma->multichannel && tusb_dma && tusb_dma->ch >= 0)
+                omap_free_dma(tusb_dma->ch);
+
+        kfree(tusb_dma);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *base)
+{
+        void __iomem            *tbase = musb->ctrl_base;
+        struct tusb_omap_dma    *tusb_dma;
+        int                     i;
+
+        /* REVISIT: Get dmareq lines used from board-*.c */
+
+        musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff);
+        musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0);
+
+        musb_writel(tbase, TUSB_DMA_REQ_CONF,
+                TUSB_DMA_REQ_CONF_BURST_SIZE(2)
+                | TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f)
+                | TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+        tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL);
+        if (!tusb_dma)
+                goto cleanup;
+
+        tusb_dma->musb = musb;
+        tusb_dma->tbase = musb->ctrl_base;
+
+        tusb_dma->ch = -1;
+        tusb_dma->dmareq = -1;
+        tusb_dma->sync_dev = -1;
+
+        tusb_dma->controller.start = tusb_omap_dma_start;
+        tusb_dma->controller.stop = tusb_omap_dma_stop;
+        tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate;
+        tusb_dma->controller.channel_release = tusb_omap_dma_release;
+        tusb_dma->controller.channel_program = tusb_omap_dma_program;
+        tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
+
+        if (tusb_get_revision(musb) >= TUSB_REV_30)
+                tusb_dma->multichannel = 1;
+
+        for (i = 0; i < MAX_DMAREQ; i++) {
+                struct dma_channel      *ch;
+                struct tusb_omap_dma_ch *chdat;
+
+                ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL);
+                if (!ch)
+                        goto cleanup;
+
+                dma_channel_pool[i] = ch;
+
+                chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL);
+                if (!chdat)
+                        goto cleanup;
+
+                ch->status = MUSB_DMA_STATUS_UNKNOWN;
+                ch->private_data = chdat;
+        }
+
+        return &tusb_dma->controller;
+
+cleanup:
+        dma_controller_destroy(&tusb_dma->controller);
+
+        return NULL;
+}
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8878c1767fc8..70338f4ec918 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -499,9 +499,10 @@ config USB_SERIAL_SAFE_PADDED
 config USB_SERIAL_SIERRAWIRELESS
         tristate "USB Sierra Wireless Driver"
         help
-          Say M here if you want to use a Sierra Wireless device (if
-          using an PC 5220 or AC580 please use the Airprime driver
-          instead).
+          Say M here if you want to use Sierra Wireless devices.
+
+          Many deviecs have a feature known as TRU-Install, for those devices
+          to work properly the USB Storage Sierra feature must be enabled.
 
           To compile this driver as a module, choose M here: the
           module will be called sierra.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 838717250145..984f6eff4c47 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -563,6 +563,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
         { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
         { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
         { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -637,6 +638,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
         { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
         { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
@@ -646,6 +648,10 @@ static struct usb_device_id id_table_combined [] = {
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+        { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+        { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
         { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
         { },                                    /* Optional parameter entry */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index a577ea44dcf9..382265bba969 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -524,7 +524,9 @@
 #define FTDI_ELV_WS300PC_PID    0xE0F6  /* PC-Wetterstation (WS 300 PC) */
 #define FTDI_ELV_FHZ1300PC_PID  0xE0E8  /* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID      0xE0E9  /* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID      0xE0EA  /* USB to RS-485 adapter */
 #define FTDI_ELV_EM1010PC_PID   0xE0EF  /* Engery monitor EM 1010 PC */
+#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 
 /*
  * Definitions for ID TECH (www.idt-net.com) devices
@@ -815,6 +817,11 @@
 #define OLIMEX_VID                      0x15BA
 #define OLIMEX_ARM_USB_OCD_PID          0x0003
 
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID        0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID         0xbcd9
+
 /* www.elsterelectricity.com Elster Unicom III Optical Probe */
 #define FTDI_ELSTER_UNICOM_PID          0xE700 /* Product Id */
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e4eca95f2b0f..e143198aeb02 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -186,6 +186,23 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define BANDRICH_VENDOR_ID                      0x1A8D
 #define BANDRICH_PRODUCT_C100_1                 0x1002
 #define BANDRICH_PRODUCT_C100_2                 0x1003
+#define BANDRICH_PRODUCT_1004                   0x1004
+#define BANDRICH_PRODUCT_1005                   0x1005
+#define BANDRICH_PRODUCT_1006                   0x1006
+#define BANDRICH_PRODUCT_1007                   0x1007
+#define BANDRICH_PRODUCT_1008                   0x1008
+#define BANDRICH_PRODUCT_1009                   0x1009
+#define BANDRICH_PRODUCT_100A                   0x100a
+
+#define BANDRICH_PRODUCT_100B                   0x100b
+#define BANDRICH_PRODUCT_100C                   0x100c
+#define BANDRICH_PRODUCT_100D                   0x100d
+#define BANDRICH_PRODUCT_100E                   0x100e
+
+#define BANDRICH_PRODUCT_100F                   0x100f
+#define BANDRICH_PRODUCT_1010                   0x1010
+#define BANDRICH_PRODUCT_1011                   0x1011
+#define BANDRICH_PRODUCT_1012                   0x1012
 
 #define AMOI_VENDOR_ID                  0x1614
 #define AMOI_PRODUCT_9508                       0x0800
@@ -197,6 +214,10 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define TELIT_VENDOR_ID                         0x1bc7
 #define TELIT_PRODUCT_UC864E                    0x1003
 
+/* ZTE PRODUCTS */
+#define ZTE_VENDOR_ID                           0x19d2
+#define ZTE_PRODUCT_MF628                       0x0015
+
 static struct usb_device_id option_ids[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -302,12 +323,28 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011) },
+        { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012) },
         { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
         { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
         { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
         { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
         { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
         { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+        { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -346,11 +383,7 @@ static struct usb_serial_driver option_1port_device = {
         .read_int_callback = option_instat_callback,
 };
 
-#ifdef CONFIG_USB_DEBUG
 static int debug;
-#else
-#define debug 0
-#endif
 
 /* per port private data */
 
@@ -954,8 +987,5 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_USB_DEBUG
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug messages");
-#endif
-
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 2c9c446ad625..1ede1441cb1b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -90,7 +90,6 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
         { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
         { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
-        { USB_DEVICE(HL340_VENDOR_ID, HL340_PRODUCT_ID) },
         { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
         { }                                     /* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 6ac3bbcf7a22..a3bd039c78e9 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -107,10 +107,6 @@
 #define COREGA_VENDOR_ID        0x07aa
 #define COREGA_PRODUCT_ID       0x002a
 
-/* HL HL-340 (ID: 4348:5523) */
-#define HL340_VENDOR_ID         0x4348
-#define HL340_PRODUCT_ID        0x5523
-
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID       0x05ad
 #define YCCABLE_PRODUCT_ID      0x0fba
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 2f6f1523ec56..706033753adb 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.2.9c"
+#define DRIVER_VERSION "v.1.2.13a"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -31,6 +31,7 @@
 #define SWIMS_USB_REQUEST_SetPower      0x00
 #define SWIMS_USB_REQUEST_SetNmea       0x07
 #define SWIMS_USB_REQUEST_SetMode       0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo   0x0A
 #define SWIMS_SET_MODE_Modem            0x0001
 
 /* per port private data */
@@ -40,18 +41,11 @@
 
 static int debug;
 static int nmea;
-static int truinstall = 1;
-
-enum devicetype {
-        DEVICE_3_PORT =         0,
-        DEVICE_1_PORT =         1,
-        DEVICE_INSTALLER =      2,
-};
 
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
         int result;
-        dev_dbg(&udev->dev, "%s", "SET POWER STATE\n");
+        dev_dbg(&udev->dev, "%s", __func__);
         result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
                         SWIMS_USB_REQUEST_SetPower,     /* __u8 request      */
                         USB_TYPE_VENDOR,                /* __u8 request type */
@@ -63,25 +57,10 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
         return result;
 }
 
-static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
-{
-        int result;
-        dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH\n");
-        result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-                        SWIMS_USB_REQUEST_SetMode,      /* __u8 request      */
-                        USB_TYPE_VENDOR,                /* __u8 request type */
-                        eSWocMode,                      /* __u16 value       */
-                        0x0000,                         /* __u16 index       */
-                        NULL,                           /* void *data        */
-                        0,                              /* __u16 size        */
-                        USB_CTRL_SET_TIMEOUT);          /* int timeout       */
-        return result;
-}
-
 static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
 {
         int result;
-        dev_dbg(&udev->dev, "%s", "NMEA Enable sent\n");
+        dev_dbg(&udev->dev, "%s", __func__);
         result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
                         SWIMS_USB_REQUEST_SetNmea,      /* __u8 request      */
                         USB_TYPE_VENDOR,                /* __u8 request type */
@@ -97,6 +76,7 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 {
         int result;
         int *num_ports = usb_get_serial_data(serial);
+        dev_dbg(&serial->dev->dev, "%s", __func__);
 
         result = *num_ports;
 
@@ -110,22 +90,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 
 static int sierra_calc_interface(struct usb_serial *serial)
 {
-                int interface;
-                struct usb_interface *p_interface;
-                struct usb_host_interface *p_host_interface;
+        int interface;
+        struct usb_interface *p_interface;
+        struct usb_host_interface *p_host_interface;
+        dev_dbg(&serial->dev->dev, "%s", __func__);
 
-                /* Get the interface structure pointer from the serial struct */
-                p_interface = serial->interface;
+        /* Get the interface structure pointer from the serial struct */
+        p_interface = serial->interface;
 
-                /* Get a pointer to the host interface structure */
-                p_host_interface = p_interface->cur_altsetting;
+        /* Get a pointer to the host interface structure */
+        p_host_interface = p_interface->cur_altsetting;
 
-                /* read the interface descriptor for this active altsetting
-                 * to find out the interface number we are on
-                */
-                interface = p_host_interface->desc.bInterfaceNumber;
+        /* read the interface descriptor for this active altsetting
+         * to find out the interface number we are on
+        */
+        interface = p_host_interface->desc.bInterfaceNumber;
 
-                return interface;
+        return interface;
 }
 
 static int sierra_probe(struct usb_serial *serial,
@@ -135,43 +116,40 @@ static int sierra_probe(struct usb_serial *serial,
         struct usb_device *udev;
         int *num_ports;
         u8 ifnum;
+        u8 numendpoints;
+
+        dev_dbg(&serial->dev->dev, "%s", __func__);
 
         num_ports = kmalloc(sizeof(*num_ports), GFP_KERNEL);
         if (!num_ports)
                 return -ENOMEM;
 
         ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+        numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
         udev = serial->dev;
 
-                /* Figure out the interface number from the serial structure */
-                ifnum = sierra_calc_interface(serial);
-
-                /*
-                 * If this interface supports more than 1 alternate
-                 * select the 2nd one
-                 */
-                if (serial->interface->num_altsetting == 2) {
-                        dev_dbg(&udev->dev,
-                                "Selecting alt setting for interface %d\n",
-                                ifnum);
+        /* Figure out the interface number from the serial structure */
+        ifnum = sierra_calc_interface(serial);
 
-                        /* We know the alternate setting is 1 for the MC8785 */
-                        usb_set_interface(udev, ifnum, 1);
-                }
+        /*
+         * If this interface supports more than 1 alternate
+         * select the 2nd one
+         */
+        if (serial->interface->num_altsetting == 2) {
+                dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n",
+                        ifnum);
+                /* We know the alternate setting is 1 for the MC8785 */
+                usb_set_interface(udev, ifnum, 1);
+        }
 
-        /* Check if in installer mode */
-        if (truinstall && id->driver_info == DEVICE_INSTALLER) {
-                dev_dbg(&udev->dev, "%s", "FOUND TRU-INSTALL DEVICE(SW)\n");
-                result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
-                /* Don't bind to the device when in installer mode */
-                kfree(num_ports);
-                return -EIO;
-        } else if (id->driver_info == DEVICE_1_PORT)
-                *num_ports = 1;
-        else if (ifnum == 0x99)
+        /* Dummy interface present on some SKUs should be ignored */
+        if (ifnum == 0x99)
                 *num_ports = 0;
+        else if (numendpoints <= 3)
+                *num_ports = 1;
         else
-                *num_ports = 3;
+                *num_ports = (numendpoints-1)/2;
+
         /*
          * save off our num_ports info so that we can use it in the
          * calc_num_ports callback
@@ -187,40 +165,50 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
         { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
         { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
+        { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
         { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
         { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
         { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
         { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
-        { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, /* Sierra Wireless C597 */
+         /* Sierra Wireless C597 */
+        { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
+         /* Sierra Wireless Device */
+        { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
+        { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
 
         { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
         { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
         { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
         { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
-        { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Thinkpad internal) */
+        { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Lenovo) */
         { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
         { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */
         { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
         { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
-        { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780*/
-        { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781*/
-        { USB_DEVICE(0x1199, 0x683B), .driver_info = DEVICE_1_PORT },   /* Sierra Wireless MC8785 Composite*/
+        { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
+        { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
+        { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
+        { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */
+        { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */
+        { USB_DEVICE(0x1199, 0x683E) }, /* Sierra Wireless MC8790 */
         { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */
         { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */
         { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */
         { USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881 E */
         { USB_DEVICE(0x1199, 0x6855) }, /* Sierra Wireless AirCard 880 U */
         { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
-        { USB_DEVICE(0x1199, 0x6859), .driver_info = DEVICE_1_PORT },   /* Sierra Wireless AirCard 885 E */
-        { USB_DEVICE(0x1199, 0x685A), .driver_info = DEVICE_1_PORT },   /* Sierra Wireless AirCard 885 E */
-
-        { USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */
-        { USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */
-
-        { USB_DEVICE(0x1199, 0x0112), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 580 */
-        { USB_DEVICE(0x0F3D, 0x0112), .driver_info = DEVICE_1_PORT }, /* Airprime/Sierra PC 5220 */
+        { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */
+        { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
+        /* Sierra Wireless C885 */
+        { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
+        /* Sierra Wireless Device */
+        { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
+        /* Sierra Wireless Device */
+        { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
+
+        { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
+        { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 
-        { USB_DEVICE(0x1199, 0x0FFF), .driver_info = DEVICE_INSTALLER},
         { }
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -268,13 +256,19 @@ static int sierra_send_setup(struct tty_struct *tty,
                 if (portdata->rts_state)
                         val |= 0x02;
 
-                /* Determine which port is targeted */
-                if (port->bulk_out_endpointAddress == 2)
-                        interface = 0;
-                else if (port->bulk_out_endpointAddress == 4)
-                        interface = 1;
-                else if (port->bulk_out_endpointAddress == 5)
-                        interface = 2;
+                /* If composite device then properly report interface */
+                if (serial->num_ports == 1)
+                        interface = sierra_calc_interface(serial);
+
+                /* Otherwise the need to do non-composite mapping */
+                else {
+                        if (port->bulk_out_endpointAddress == 2)
+                                interface = 0;
+                        else if (port->bulk_out_endpointAddress == 4)
+                                interface = 1;
+                        else if (port->bulk_out_endpointAddress == 5)
+                                interface = 2;
+                }
 
                 return usb_control_msg(serial->dev,
                                 usb_rcvctrlpipe(serial->dev, 0),
@@ -713,7 +707,7 @@ static void sierra_shutdown(struct usb_serial *serial)
 static struct usb_serial_driver sierra_device = {
         .driver = {
                 .owner =        THIS_MODULE,
-                .name =         "sierra1",
+                .name =         "sierra",
         },
         .description       = "Sierra USB modem",
         .id_table          = id_table,
@@ -769,14 +763,8 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-module_param(truinstall, bool, 0);
-MODULE_PARM_DESC(truinstall, "TRU-Install support");
-
-module_param(nmea, bool, 0);
+module_param(nmea, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(nmea, "NMEA streaming");
 
-#ifdef CONFIG_USB_DEBUG
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug messages");
-#endif
-
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8c2d531eedea..b157c48e8b78 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -122,9 +122,6 @@ static void return_serial(struct usb_serial *serial)
 
         dbg("%s", __func__);
 
-        if (serial == NULL)
-                return;
-
         for (i = 0; i < serial->num_ports; ++i)
                 serial_table[serial->minor + i] = NULL;
 }
@@ -142,7 +139,8 @@ static void destroy_serial(struct kref *kref)
         serial->type->shutdown(serial);
 
         /* return the minor range that this device had */
-        return_serial(serial);
+        if (serial->minor != SERIAL_TTY_NO_MINOR)
+                return_serial(serial);
 
         for (i = 0; i < serial->num_ports; ++i)
                 serial->port[i]->port.count = 0;
@@ -575,6 +573,7 @@ static struct usb_serial *create_serial(struct usb_device *dev,
         serial->interface = interface;
         kref_init(&serial->kref);
         mutex_init(&serial->disc_mutex);
+        serial->minor = SERIAL_TTY_NO_MINOR;
 
         return serial;
 }
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 3d9249632ae1..c76034672c18 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -146,6 +146,18 @@ config USB_STORAGE_KARMA
           on the resulting scsi device node returns the Karma to normal
           operation.
 
+config USB_STORAGE_SIERRA
+        bool "Sierra Wireless TRU-Install Feature Support"
+        depends on USB_STORAGE
+        help
+          Say Y here to include additional code to support Sierra Wireless
+          products with the TRU-Install feature (e.g., AC597E, AC881U).
+
+          This code switches the Sierra Wireless device from being in
+          Mass Storage mode to Modem mode. It also has the ability to
+          support host software upgrades should full Linux support be added
+          to TRU-Install.
+
 config USB_STORAGE_CYPRESS_ATACB
         bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
         depends on USB_STORAGE
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 4c596c766c53..bc3415b475c9 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -21,6 +21,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)    += alauda.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)  += onetouch.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)     += karma.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA)    += sierra_ms.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=     scsiglue.o protocol.o transport.o usb.o \
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
new file mode 100644
index 000000000000..4359a2cb42df
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.c
@@ -0,0 +1,207 @@
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/usb.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "sierra_ms.h"
+#include "debug.h"
+
+#define SWIMS_USB_REQUEST_SetSwocMode   0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo   0x0A
+#define SWIMS_USB_INDEX_SetMode         0x0000
+#define SWIMS_SET_MODE_Modem            0x0001
+
+#define TRU_NORMAL                      0x01
+#define TRU_FORCE_MS                    0x02
+#define TRU_FORCE_MODEM                 0x03
+
+static unsigned int swi_tru_install = 1;
+module_param(swi_tru_install, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(swi_tru_install, "TRU-Install mode (1=Full Logic (def),"
+                 " 2=Force CD-Rom, 3=Force Modem)");
+
+struct swoc_info {
+        __u8 rev;
+        __u8 reserved[8];
+        __u16 LinuxSKU;
+        __u16 LinuxVer;
+        __u8 reserved2[47];
+} __attribute__((__packed__));
+
+static bool containsFullLinuxPackage(struct swoc_info *swocInfo)
+{
+        if ((swocInfo->LinuxSKU >= 0x2100 && swocInfo->LinuxSKU <= 0x2FFF) ||
+           (swocInfo->LinuxSKU >= 0x7100 && swocInfo->LinuxSKU <= 0x7FFF))
+                return true;
+        else
+                return false;
+}
+
+static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
+{
+        int result;
+        US_DEBUGP("SWIMS: %s", "DEVICE MODE SWITCH\n");
+        result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+                        SWIMS_USB_REQUEST_SetSwocMode,  /* __u8 request      */
+                        USB_TYPE_VENDOR | USB_DIR_OUT,  /* __u8 request type */
+                        eSWocMode,                      /* __u16 value       */
+                        0x0000,                         /* __u16 index       */
+                        NULL,                           /* void *data        */
+                        0,                              /* __u16 size        */
+                        USB_CTRL_SET_TIMEOUT);          /* int timeout       */
+        return result;
+}
+
+
+static int sierra_get_swoc_info(struct usb_device *udev,
+                                struct swoc_info *swocInfo)
+{
+        int result;
+
+        US_DEBUGP("SWIMS: Attempting to get TRU-Install info.\n");
+
+        result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+                        SWIMS_USB_REQUEST_GetSwocInfo,  /* __u8 request      */
+                        USB_TYPE_VENDOR | USB_DIR_IN,   /* __u8 request type */
+                        0,                              /* __u16 value       */
+                        0,                              /* __u16 index       */
+                        (void *) swocInfo,              /* void *data        */
+                        sizeof(struct swoc_info),       /* __u16 size        */
+                        USB_CTRL_SET_TIMEOUT);          /* int timeout       */
+
+        swocInfo->LinuxSKU = le16_to_cpu(swocInfo->LinuxSKU);
+        swocInfo->LinuxVer = le16_to_cpu(swocInfo->LinuxVer);
+        return result;
+}
+
+static void debug_swoc(struct swoc_info *swocInfo)
+{
+        US_DEBUGP("SWIMS: SWoC Rev: %02d \n", swocInfo->rev);
+        US_DEBUGP("SWIMS: Linux SKU: %04X \n", swocInfo->LinuxSKU);
+        US_DEBUGP("SWIMS: Linux Version: %04X \n", swocInfo->LinuxVer);
+}
+
+
+static ssize_t show_truinst(struct device *dev, struct device_attribute *attr,
+                        char *buf)
+{
+        struct swoc_info *swocInfo;
+        struct usb_interface *intf = to_usb_interface(dev);
+        struct usb_device *udev = interface_to_usbdev(intf);
+        int result;
+        if (swi_tru_install == TRU_FORCE_MS) {
+                result = snprintf(buf, PAGE_SIZE, "Forced Mass Storage\n");
+        } else {
+                swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL);
+                if (!swocInfo) {
+                        US_DEBUGP("SWIMS: Allocation failure\n");
+                        snprintf(buf, PAGE_SIZE, "Error\n");
+                        return -ENOMEM;
+                }
+                result = sierra_get_swoc_info(udev, swocInfo);
+                if (result < 0) {
+                        US_DEBUGP("SWIMS: failed SWoC query\n");
+                        kfree(swocInfo);
+                        snprintf(buf, PAGE_SIZE, "Error\n");
+                        return -EIO;
+                }
+                debug_swoc(swocInfo);
+                result = snprintf(buf, PAGE_SIZE,
+                        "REV=%02d SKU=%04X VER=%04X\n",
+                        swocInfo->rev,
+                        swocInfo->LinuxSKU,
+                        swocInfo->LinuxVer);
+                kfree(swocInfo);
+        }
+        return result;
+}
+static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+
+int sierra_ms_init(struct us_data *us)
+{
+        int result, retries;
+        signed long delay_t;
+        struct swoc_info *swocInfo;
+        struct usb_device *udev;
+        struct Scsi_Host *sh;
+        struct scsi_device *sd;
+
+        delay_t = 2;
+        retries = 3;
+        result = 0;
+        udev = us->pusb_dev;
+
+        sh = us_to_host(us);
+        sd = scsi_get_host_dev(sh);
+
+        US_DEBUGP("SWIMS: sierra_ms_init called\n");
+
+        /* Force Modem mode */
+        if (swi_tru_install == TRU_FORCE_MODEM) {
+                US_DEBUGP("SWIMS: %s", "Forcing Modem Mode\n");
+                result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
+                if (result < 0)
+                        US_DEBUGP("SWIMS: Failed to switch to modem mode.\n");
+                return -EIO;
+        }
+        /* Force Mass Storage mode (keep CD-Rom) */
+        else if (swi_tru_install == TRU_FORCE_MS) {
+                US_DEBUGP("SWIMS: %s", "Forcing Mass Storage Mode\n");
+                goto complete;
+        }
+        /* Normal TRU-Install Logic */
+        else {
+                US_DEBUGP("SWIMS: %s", "Normal SWoC Logic\n");
+
+                swocInfo = kmalloc(sizeof(struct swoc_info),
+                                GFP_KERNEL);
+                if (!swocInfo) {
+                        US_DEBUGP("SWIMS: %s", "Allocation failure\n");
+                        return -ENOMEM;
+                }
+
+                retries = 3;
+                do {
+                        retries--;
+                        result = sierra_get_swoc_info(udev, swocInfo);
+                        if (result < 0) {
+                                US_DEBUGP("SWIMS: %s", "Failed SWoC query\n");
+                                schedule_timeout_uninterruptible(2*HZ);
+                        }
+                } while (retries && result < 0);
+
+                if (result < 0) {
+                        US_DEBUGP("SWIMS: %s",
+                                  "Completely failed SWoC query\n");
+                        kfree(swocInfo);
+                        return -EIO;
+                }
+
+                debug_swoc(swocInfo);
+
+                /* If there is not Linux software on the TRU-Install device
+                 * then switch to modem mode
+                 */
+                if (!containsFullLinuxPackage(swocInfo)) {
+                        US_DEBUGP("SWIMS: %s",
+                                "Switching to Modem Mode\n");
+                        result = sierra_set_ms_mode(udev,
+                                SWIMS_SET_MODE_Modem);
+                        if (result < 0)
+                                US_DEBUGP("SWIMS: Failed to switch modem\n");
+                        kfree(swocInfo);
+                        return -EIO;
+                }
+                kfree(swocInfo);
+        }
+complete:
+        result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst);
+
+        return USB_STOR_TRANSPORT_GOOD;
+}
+
diff --git a/drivers/usb/storage/sierra_ms.h b/drivers/usb/storage/sierra_ms.h
new file mode 100644
index 000000000000..bb48634ac1fc
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.h
@@ -0,0 +1,4 @@
+#ifndef _SIERRA_MS_H_
+#define _SIERRA_MS_H_
+extern int sierra_ms_init(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fcbbfdb7b2b0..3523a0bfa0ff 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1032,8 +1032,21 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 
         /* try to compute the actual residue, based on how much data
          * was really transferred and what the device tells us */
-        if (residue) {
-                if (!(us->fflags & US_FL_IGNORE_RESIDUE)) {
+        if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
+
+                /* Heuristically detect devices that generate bogus residues
+                 * by seeing what happens with INQUIRY and READ CAPACITY
+                 * commands.
+                 */
+                if (bcs->Status == US_BULK_STAT_OK &&
+                                scsi_get_resid(srb) == 0 &&
+                                        ((srb->cmnd[0] == INQUIRY &&
+                                                transfer_length == 36) ||
+                                        (srb->cmnd[0] == READ_CAPACITY &&
+                                                transfer_length == 8))) {
+                        us->fflags |= US_FL_IGNORE_RESIDUE;
+
+                } else {
                         residue = min(residue, transfer_length);
                         scsi_set_resid(srb, max(scsi_get_resid(srb),
                                                                (int) residue));
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7ae69f55aa96..ba412e68d474 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -225,6 +225,13 @@ UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Cedric Godin <cedric@belbone.be> */
+UNUSUAL_DEV(  0x0421, 0x04b9, 0x0551, 0x0551,
+                "Nokia",
+                "5300",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
                 "SMSC",
@@ -356,14 +363,14 @@ UNUSUAL_DEV(  0x04b0, 0x040f, 0x0100, 0x0200,
                 US_FL_FIX_CAPACITY),
 
 /* Reported by Emil Larsson <emil@swip.net> */
-UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0110,
+UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0111,
                 "NIKON",
                 "NIKON DSC D80",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY),
 
 /* Reported by Ortwin Glueck <odi@odi.ch> */
-UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0110,
+UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0111,
                 "NIKON",
                 "NIKON DSC D40",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -1185,6 +1192,13 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_INQUIRY ),
 
+/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
+                "Simple Tech/Datafab",
+                "CF+SM Reader",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE ),
+
 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
  * to the USB storage specification in two ways:
  * - They tell us they are using transport protocol CBI. In reality they
@@ -1562,6 +1576,7 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 0),
 
+#ifdef CONFIG_USB_STORAGE_SIERRA
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
@@ -1570,8 +1585,9 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
                 "Sierra Wireless",
                 "USB MMC Storage",
-                US_SC_DEVICE, US_PR_DEVICE, NULL,
-                US_FL_IGNORE_DEVICE),
+                US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
+                0),
+#endif
 
 /* Reported by Jaco Kroon <jaco@kroon.co.za>
  * The usb-storage module found on the Digitech GNX4 (and supposedly other
@@ -1743,6 +1759,15 @@ UNUSUAL_DEV(  0x22b8, 0x4810, 0x0001, 0x0002,
                 US_FL_FIX_CAPACITY),
 
 /*
+ * Patch by Jost Diederichs <jost@qdusa.com>
+ */
+UNUSUAL_DEV(0x22b8, 0x6410, 0x0001, 0x9999,
+                "Motorola Inc.",
+                "Motorola Phone (RAZRV3xx)",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY),
+
+/*
  * Patch by Constantin Baranov <const@tltsu.ru>
  * Report by Andreas Koenecke.
  * Motorola ROKR Z6.
@@ -1767,6 +1792,13 @@ UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY ),
 
+/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
+UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
+                "iRiver",
+                "MP3 T10",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE ),
+
 /*
  * David Härdeman <david@2gen.com>
  * The key makes the SCSI stack print confusing (but harmless) messages
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index bfea851be985..73679aa506de 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -102,6 +102,9 @@
 #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
 #include "cypress_atacb.h"
 #endif
+#ifdef CONFIG_USB_STORAGE_SIERRA
+#include "sierra_ms.h"
+#endif
 
 /* Some informational data */
 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index e7018a2f56af..9c5925927ece 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -39,7 +39,9 @@
 #endif
 
 #if defined(CONFIG_ARCH_AT91)
-#define ATMEL_LCDFB_FBINFO_DEFAULT      FBINFO_DEFAULT
+#define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
+                                         | FBINFO_PARTIAL_PAN_OK \
+                                         | FBINFO_HWACCEL_YPAN)
 
 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
                                         struct fb_var_screeninfo *var)
@@ -177,7 +179,7 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
         .type           = FB_TYPE_PACKED_PIXELS,
         .visual         = FB_VISUAL_TRUECOLOR,
         .xpanstep       = 0,
-        .ypanstep       = 0,
+        .ypanstep       = 1,
         .ywrapstep      = 0,
         .accel          = FB_ACCEL_NONE,
 };
@@ -240,9 +242,11 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 {
         struct fb_info *info = sinfo->info;
         struct fb_var_screeninfo *var = &info->var;
+        unsigned int smem_len;
 
-        info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-                            * ((var->bits_per_pixel + 7) / 8));
+        smem_len = (var->xres_virtual * var->yres_virtual
+                    * ((var->bits_per_pixel + 7) / 8));
+        info->fix.smem_len = max(smem_len, sinfo->smem_len);
 
         info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
                                         (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
@@ -794,6 +798,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
                 sinfo->default_monspecs = pdata_sinfo->default_monspecs;
                 sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
                 sinfo->guard_time = pdata_sinfo->guard_time;
+                sinfo->smem_len = pdata_sinfo->smem_len;
                 sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
                 sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
         } else {
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c
index 4d13f68436e6..aa95f8350242 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/aty/radeon_accel.c
@@ -55,6 +55,10 @@ static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo,
         OUTREG(DP_WRITE_MSK, 0xffffffff);
         OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM));
 
+        radeon_fifo_wait(2);
+        OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
+        OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
+
         radeon_fifo_wait(2);  
         OUTREG(DST_Y_X, (region->dy << 16) | region->dx);
         OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height);
@@ -116,6 +120,10 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo,
         OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0)
                         | (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
 
+        radeon_fifo_wait(2);
+        OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
+        OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
+
         radeon_fifo_wait(3);
         OUTREG(SRC_Y_X, (sy << 16) | sx);
         OUTREG(DST_Y_X, (dy << 16) | dx);
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 33859934a8e4..c6299e8a041d 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2518,7 +2518,7 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
                         c = vc->vc_video_erase_char;
                         vc->vc_video_erase_char =
                             ((c & 0xfe00) >> 1) | (c & 0xff);
-                        c = vc->vc_def_color;
+                        c = vc->vc_scrl_erase_char;
                         vc->vc_scrl_erase_char =
                             ((c & 0xFE00) >> 1) | (c & 0xFF);
                         vc->vc_attr >>= 1;
@@ -2551,7 +2551,7 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
                         if (vc->vc_can_do_color) {
                                 vc->vc_video_erase_char =
                                     ((c & 0xff00) << 1) | (c & 0xff);
-                                c = vc->vc_def_color;
+                                c = vc->vc_scrl_erase_char;
                                 vc->vc_scrl_erase_char =
                                     ((c & 0xFF00) << 1) | (c & 0xFF);
                                 vc->vc_attr <<= 1;
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index bd320a2bfb7c..fb51197d1c98 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -479,6 +479,10 @@ static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
         base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
         base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
 
+        if (mfbi->x_aoi_d < 0)
+                mfbi->x_aoi_d = 0;
+        if (mfbi->y_aoi_d < 0)
+                mfbi->y_aoi_d = 0;
         switch (index) {
         case 0:
                 if (mfbi->x_aoi_d != 0)
@@ -778,6 +782,22 @@ static void unmap_video_memory(struct fb_info *info)
 }
 
 /*
+ * Using the fb_var_screeninfo in fb_info we set the aoi of this
+ * particular framebuffer. It is a light version of fsl_diu_set_par.
+ */
+static int fsl_diu_set_aoi(struct fb_info *info)
+{
+        struct fb_var_screeninfo *var = &info->var;
+        struct mfb_info *mfbi = info->par;
+        struct diu_ad *ad = mfbi->ad;
+
+        /* AOI should not be greater than display size */
+        ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+        ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+        return 0;
+}
+
+/*
  * Using the fb_var_screeninfo in fb_info we set the resolution of this
  * particular framebuffer. This function alters the fb_fix_screeninfo stored
  * in fb_info. It does not alter var in fb_info since we are using that
@@ -817,11 +837,11 @@ static int fsl_diu_set_par(struct fb_info *info)
                 diu_ops.get_pixel_format(var->bits_per_pixel,
                                          machine_data->monitor_port);
         ad->addr    = cpu_to_le32(info->fix.smem_start);
-        ad->src_size_g_alpha = cpu_to_le32((var->yres << 12) |
-                                var->xres) | mfbi->g_alpha;
-        /* fix me. AOI should not be greater than display size */
+        ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
+                                var->xres_virtual) | mfbi->g_alpha;
+        /* AOI should not be greater than display size */
         ad->aoi_size    = cpu_to_le32((var->yres << 16) | var->xres);
-        ad->offset_xyi = 0;
+        ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
         ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
 
         /* Disable chroma keying function */
@@ -921,6 +941,8 @@ static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
         else
                 info->var.vmode &= ~FB_VMODE_YWRAP;
 
+        fsl_diu_set_aoi(info);
+
         return 0;
 }
 
@@ -989,7 +1011,7 @@ static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
                 pr_debug("set AOI display offset of index %d to (%d,%d)\n",
                                  mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
                 fsl_diu_check_var(&info->var, info);
-                fsl_diu_set_par(info);
+                fsl_diu_set_aoi(info);
                 break;
         case MFB_GET_AOID:
                 aoi_d.x_aoi_d = mfbi->x_aoi_d;
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c
index 75ee5a12e549..c14e3e2212b3 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/matrox/i2c-matroxfb.c
@@ -87,13 +87,7 @@ static int matroxfb_gpio_getscl(void* data) {
         return (matroxfb_read_gpio(b->minfo) & b->mask.clock) ? 1 : 0;
 }
 
-static struct i2c_adapter matrox_i2c_adapter_template =
-{
-        .owner =        THIS_MODULE,
-        .id =           I2C_HW_B_G400,
-};
-
-static struct i2c_algo_bit_data matrox_i2c_algo_template =
+static const struct i2c_algo_bit_data matrox_i2c_algo_template =
 {
         .setsda         = matroxfb_gpio_setsda,
         .setscl         = matroxfb_gpio_setscl,
@@ -112,7 +106,7 @@ static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo,
         b->minfo = minfo;
         b->mask.data = data;
         b->mask.clock = clock;
-        b->adapter = matrox_i2c_adapter_template;
+        b->adapter.owner = THIS_MODULE;
         snprintf(b->adapter.name, sizeof(b->adapter.name), name,
                 minfo->fbcon.node);
         i2c_set_adapdata(&b->adapter, b);
@@ -187,6 +181,17 @@ static void* i2c_matroxfb_probe(struct matrox_fb_info* minfo) {
                                   MAT_DATA, MAT_CLK, "MAVEN:fb%u", 0);
                 if (err)
                         printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n");
+                else {
+                        struct i2c_board_info maven_info = {
+                                I2C_BOARD_INFO("maven", 0x1b),
+                        };
+                        unsigned short const addr_list[2] = {
+                                0x1b, I2C_CLIENT_END
+                        };
+
+                        i2c_new_probed_device(&m2info->maven.adapter,
+                                              &maven_info, addr_list);
+                }
         }
         return m2info;
 fail_ddc1:;
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/matrox/matroxfb_maven.c
index 89da27bd5c49..042408a8c631 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/matrox/matroxfb_maven.c
@@ -19,8 +19,6 @@
 #include <linux/matroxfb.h>
 #include <asm/div64.h>
 
-#define MAVEN_I2CID     (0x1B)
-
 #define MGATVO_B        1
 #define MGATVO_C        2
 
@@ -128,7 +126,7 @@ static int get_ctrl_id(__u32 v4l2_id) {
 
 struct maven_data {
         struct matrox_fb_info*          primary_head;
-        struct i2c_client               client;
+        struct i2c_client               *client;
         int                             version;
 };
 
@@ -974,7 +972,7 @@ static inline int maven_compute_timming(struct maven_data* md,
 
 static int maven_program_timming(struct maven_data* md,
                 const struct mavenregs* m) {
-        struct i2c_client* c = &md->client;
+        struct i2c_client *c = md->client;
 
         if (m->mode == MATROXFB_OUTPUT_MODE_MONITOR) {
                 LR(0x80);
@@ -1011,7 +1009,7 @@ static int maven_program_timming(struct maven_data* md,
 }
 
 static inline int maven_resync(struct maven_data* md) {
-        struct i2c_client* c = &md->client;
+        struct i2c_client *c = md->client;
         maven_set_reg(c, 0x95, 0x20);   /* start whole thing */
         return 0;
 }
@@ -1069,48 +1067,48 @@ static int maven_set_control (struct maven_data* md,
                   maven_compute_bwlevel(md, &blacklevel, &whitelevel);
                   blacklevel = (blacklevel >> 2) | ((blacklevel & 3) << 8);
                   whitelevel = (whitelevel >> 2) | ((whitelevel & 3) << 8);
-                  maven_set_reg_pair(&md->client, 0x0e, blacklevel);
-                  maven_set_reg_pair(&md->client, 0x1e, whitelevel);
+                  maven_set_reg_pair(md->client, 0x0e, blacklevel);
+                  maven_set_reg_pair(md->client, 0x1e, whitelevel);
                 }
                 break;
                 case V4L2_CID_SATURATION:
                 {
-                  maven_set_reg(&md->client, 0x20, p->value);
-                  maven_set_reg(&md->client, 0x22, p->value);
+                  maven_set_reg(md->client, 0x20, p->value);
+                  maven_set_reg(md->client, 0x22, p->value);
                 }
                 break;
                 case V4L2_CID_HUE:
                 {
-                  maven_set_reg(&md->client, 0x25, p->value);
+                  maven_set_reg(md->client, 0x25, p->value);
                 }
                 break;
                 case V4L2_CID_GAMMA:
                 {
                   const struct maven_gamma* g;
                   g = maven_compute_gamma(md);
-                  maven_set_reg(&md->client, 0x83, g->reg83);
-                  maven_set_reg(&md->client, 0x84, g->reg84);
-                  maven_set_reg(&md->client, 0x85, g->reg85);
-                  maven_set_reg(&md->client, 0x86, g->reg86);
-                  maven_set_reg(&md->client, 0x87, g->reg87);
-                  maven_set_reg(&md->client, 0x88, g->reg88);
-                  maven_set_reg(&md->client, 0x89, g->reg89);
-                  maven_set_reg(&md->client, 0x8a, g->reg8a);
-                  maven_set_reg(&md->client, 0x8b, g->reg8b);
+                  maven_set_reg(md->client, 0x83, g->reg83);
+                  maven_set_reg(md->client, 0x84, g->reg84);
+                  maven_set_reg(md->client, 0x85, g->reg85);
+                  maven_set_reg(md->client, 0x86, g->reg86);
+                  maven_set_reg(md->client, 0x87, g->reg87);
+                  maven_set_reg(md->client, 0x88, g->reg88);
+                  maven_set_reg(md->client, 0x89, g->reg89);
+                  maven_set_reg(md->client, 0x8a, g->reg8a);
+                  maven_set_reg(md->client, 0x8b, g->reg8b);
                 }
                 break;
                 case MATROXFB_CID_TESTOUT:
                 {
                         unsigned char val 
-                          = maven_get_reg(&md->client,0x8d);
+                          = maven_get_reg(md->client, 0x8d);
                         if (p->value) val |= 0x10;
                         else          val &= ~0x10;
-                        maven_set_reg(&md->client, 0x8d, val);
+                        maven_set_reg(md->client, 0x8d, val);
                 }
                 break;
                 case MATROXFB_CID_DEFLICKER:
                 {
-                  maven_set_reg(&md->client, 0x93, maven_compute_deflicker(md));
+                  maven_set_reg(md->client, 0x93, maven_compute_deflicker(md));
                 }
                 break;
         }
@@ -1189,6 +1187,7 @@ static int maven_init_client(struct i2c_client* clnt) {
         MINFO_FROM(container_of(clnt->adapter, struct i2c_bit_adapter, adapter)->minfo);
 
         md->primary_head = MINFO;
+        md->client = clnt;
         down_write(&ACCESS_FBINFO(altout.lock));
         ACCESS_FBINFO(outputs[1]).output = &maven_altout;
         ACCESS_FBINFO(outputs[1]).src = ACCESS_FBINFO(outputs[1]).default_src;
@@ -1232,14 +1231,11 @@ static int maven_shutdown_client(struct i2c_client* clnt) {
         return 0;
 }
 
-static const unsigned short normal_i2c[] = { MAVEN_I2CID, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver maven_driver;
-
-static int maven_detect_client(struct i2c_adapter* adapter, int address, int kind) {
-        int err = 0;
-        struct i2c_client* new_client;
+static int maven_probe(struct i2c_client *client,
+                       const struct i2c_device_id *id)
+{
+        struct i2c_adapter *adapter = client->adapter;
+        int err = -ENODEV;
         struct maven_data* data;
 
         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_WORD_DATA |
@@ -1250,50 +1246,37 @@ static int maven_detect_client(struct i2c_adapter* adapter, int address, int kin
                 err = -ENOMEM;
                 goto ERROR0;
         }
-        new_client = &data->client;
-        i2c_set_clientdata(new_client, data);
-        new_client->addr = address;
-        new_client->adapter = adapter;
-        new_client->driver = &maven_driver;
-        new_client->flags = 0;
-        strlcpy(new_client->name, "maven", I2C_NAME_SIZE);
-        if ((err = i2c_attach_client(new_client)))
-                goto ERROR3;
-        err = maven_init_client(new_client);
+        i2c_set_clientdata(client, data);
+        err = maven_init_client(client);
         if (err)
                 goto ERROR4;
         return 0;
 ERROR4:;
-        i2c_detach_client(new_client);
-ERROR3:;
-        kfree(new_client);
+        kfree(data);
 ERROR0:;
         return err;
 }
 
-static int maven_attach_adapter(struct i2c_adapter* adapter) {
-        if (adapter->id == I2C_HW_B_G400)
-                return i2c_probe(adapter, &addr_data, &maven_detect_client);
-        return 0;
-}
-
-static int maven_detach_client(struct i2c_client* client) {
-        int err;
-
-        if ((err = i2c_detach_client(client)))
-                return err;
+static int maven_remove(struct i2c_client *client)
+{
         maven_shutdown_client(client);
         kfree(i2c_get_clientdata(client));
         return 0;
 }
 
+static const struct i2c_device_id maven_id[] = {
+        { "maven", 0 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, maven_id);
+
 static struct i2c_driver maven_driver={
         .driver = {
                 .name   = "maven",
         },
-        .id             = I2C_DRIVERID_MGATVO,
-        .attach_adapter = maven_attach_adapter,
-        .detach_client  = maven_detach_client,
+        .probe          = maven_probe,
+        .remove         = maven_remove,
+        .id_table       = maven_id,
 };
 
 static int __init matroxfb_maven_init(void)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index e7aa7ae8fca8..97204497d9f7 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1031,7 +1031,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
         pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
         pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
         pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
-        pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+        if ((lccr0 & LCCR0_PAS) == 0)
+                pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
 }
 
 static void pxafb_enable_controller(struct pxafb_info *fbi)
@@ -1400,6 +1402,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
         if (lcd_conn == LCD_MONO_STN_8BPP)
                 fbi->lccr0 |= LCCR0_DPD;
 
+        fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
         fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
         fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
         fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
@@ -1673,53 +1677,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
 #define pxafb_setup_options()           (0)
 #endif
 
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
-        struct pxafb_info *fbi;
-        struct pxafb_mach_info *inf;
-        struct resource *r;
-        int irq, ret;
-
-        dev_dbg(&dev->dev, "pxafb_probe\n");
-
-        inf = dev->dev.platform_data;
-        ret = -ENOMEM;
-        fbi = NULL;
-        if (!inf)
-                goto failed;
-
-        ret = pxafb_parse_options(&dev->dev, g_options);
-        if (ret < 0)
-                goto failed;
-
 #ifdef DEBUG_VAR
-        /* Check for various illegal bit-combinations. Currently only
-         * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+                                          struct pxafb_mach_info *inf)
+{
+        if (inf->lcd_conn)
+                return;
 
         if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
-                dev_warn(&dev->dev, "machine LCCR0 setting contains "
+                dev_warn(dev, "machine LCCR0 setting contains "
                                 "illegal bits: %08x\n",
                         inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
         if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
-                dev_warn(&dev->dev, "machine LCCR3 setting contains "
+                dev_warn(dev, "machine LCCR3 setting contains "
                                 "illegal bits: %08x\n",
                         inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
         if (inf->lccr0 & LCCR0_DPD &&
             ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
              (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
              (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
-                dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+                dev_warn(dev, "Double Pixel Data (DPD) mode is "
                                 "only valid in passive mono"
                                 " single panel mode\n");
         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
             (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
-                dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+                dev_warn(dev, "Dual panel only valid in passive mode\n");
         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
              (inf->modes->upper_margin || inf->modes->lower_margin))
-                dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+                dev_warn(dev, "Upper and lower margins must be 0 in "
                                 "passive mode\n");
+}
+#else
+#define pxafb_check_options(...)        do {} while (0)
 #endif
 
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+        struct pxafb_info *fbi;
+        struct pxafb_mach_info *inf;
+        struct resource *r;
+        int irq, ret;
+
+        dev_dbg(&dev->dev, "pxafb_probe\n");
+
+        inf = dev->dev.platform_data;
+        ret = -ENOMEM;
+        fbi = NULL;
+        if (!inf)
+                goto failed;
+
+        ret = pxafb_parse_options(&dev->dev, g_options);
+        if (ret < 0)
+                goto failed;
+
+        pxafb_check_options(&dev->dev, inf);
+
         dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
                         inf->modes->xres,
                         inf->modes->yres,
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32b9fe153641..db20542796bf 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -285,10 +285,11 @@ config ALIM1535_WDT
 
 config ALIM7101_WDT
         tristate "ALi M7101 PMU Computer Watchdog"
-        depends on X86 && PCI
+        depends on PCI
         help
           This is the driver for the hardware watchdog on the ALi M7101 PMU
-          as used in the x86 Cobalt servers.
+          as used in the x86 Cobalt servers and also found in some
+          SPARC Netra servers too.
 
           To compile this driver as a module, choose M here: the
           module will be called alim7101_wdt.
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 3da2b90d2fe6..22715e3be5e7 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -157,8 +157,6 @@ static void s3c2410wdt_start(void)
         writel(wdt_count, wdt_base + S3C2410_WTCNT);
         writel(wtcon, wdt_base + S3C2410_WTCON);
         spin_unlock(&wdt_lock);
-
-        return 0;
 }
 
 static int s3c2410wdt_set_heartbeat(int timeout)