[libata] mark certain hardware (or drivers) with a no-atapi flag

Some hardware does not support the PACKET command at all.
Other hardware supports ATAPI, but the driver does something nasty such
as calling BUG() when an ATAPI command is issued.

For these such cases, we mark them with a new flag, ATA_FLAG_NO_ATAPI.

Initial version contributed by Ben Collins.

4 files changed, 15 insertions, 10 deletions

diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 379e87089764..72ddba98f8fb 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -2173,9 +2173,12 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
         if (unlikely(!ata_dev_present(dev)))
                 return NULL;
 
-        if (!atapi_enabled) {
-                if (unlikely(dev->class == ATA_DEV_ATAPI))
+        if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) {
+                if (unlikely(dev->class == ATA_DEV_ATAPI)) {
+                        printk(KERN_WARNING "ata%u(%u): WARNING: ATAPI is %s, device ignored.\n",
+                               ap->id, dev->devno, atapi_enabled ? "not supported with this driver" : "disabled");
                         return NULL;
+                }
         }
 
         return dev;
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index ab7432a5778e..9321cdf45680 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -86,7 +86,8 @@ enum {
         MV_FLAG_DUAL_HC         = (1 << 30),  /* two SATA Host Controllers */
         MV_FLAG_IRQ_COALESCE    = (1 << 29),  /* IRQ coalescing capability */
         MV_COMMON_FLAGS         = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-                                   ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO),
+                                   ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+                                   ATA_FLAG_NO_ATAPI),
         MV_6XXX_FLAGS           = MV_FLAG_IRQ_COALESCE,
 
         CRQB_FLAG_READ          = (1 << 0),
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 8a8e3e3ef0ed..2691625f9bce 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -70,6 +70,9 @@ enum {
         PDC_HAS_PATA            = (1 << 1), /* PDC20375 has PATA */
 
         PDC_RESET               = (1 << 11), /* HDMA reset */
+
+        PDC_COMMON_FLAGS        = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST |
+                                  ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI,
 };
 
 
@@ -162,8 +165,7 @@ static struct ata_port_info pdc_port_info[] = {
         /* board_2037x */
         {
                 .sht            = &pdc_ata_sht,
-                .host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-                                  ATA_FLAG_SRST | ATA_FLAG_MMIO,
+                .host_flags     = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x07, /* mwdma0-2 */
                 .udma_mask      = 0x7f, /* udma0-6 ; FIXME */
@@ -173,8 +175,7 @@ static struct ata_port_info pdc_port_info[] = {
         /* board_20319 */
         {
                 .sht            = &pdc_ata_sht,
-                .host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-                                  ATA_FLAG_SRST | ATA_FLAG_MMIO,
+                .host_flags     = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x07, /* mwdma0-2 */
                 .udma_mask      = 0x7f, /* udma0-6 ; FIXME */
@@ -184,8 +185,7 @@ static struct ata_port_info pdc_port_info[] = {
         /* board_20619 */
         {
                 .sht            = &pdc_ata_sht,
-                .host_flags     = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST |
-                                  ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS,
+                .host_flags     = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x07, /* mwdma0-2 */
                 .udma_mask      = 0x7f, /* udma0-6 ; FIXME */
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index dcc3ad9a9d6e..ac7b0d819ebc 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -220,7 +220,8 @@ static struct ata_port_info pdc_port_info[] = {
         {
                 .sht            = &pdc_sata_sht,
                 .host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-                                  ATA_FLAG_SRST | ATA_FLAG_MMIO,
+                                  ATA_FLAG_SRST | ATA_FLAG_MMIO |
+                                  ATA_FLAG_NO_ATAPI,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x07, /* mwdma0-2 */
                 .udma_mask      = 0x7f, /* udma0-6 ; FIXME */