[PATCH] wireless: move zd1201 where it belongs

zd1201 is wifi adapter, yet it is hiding in drivers/usb/net where
noone can find it. This moves Kconfig/Makefile zd1201 to the right
place.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

6 files changed, 19 insertions, 18 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index d7691c482835..30ec235e6935 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -531,6 +531,23 @@ config PRISM54
           say M here and read <file:Documentation/modules.txt>.  The module
           will be called prism54.ko.
 
+config USB_ZD1201
+        tristate "USB ZD1201 based Wireless device support"
+        depends on USB && NET_RADIO
+        select FW_LOADER
+        ---help---
+          Say Y if you want to use wireless LAN adapters based on the ZyDAS
+          ZD1201 chip.
+
+          This driver makes the adapter appear as a normal Ethernet interface,
+          typically on wlan0.
+
+          The zd1201 device requires external firmware to be loaded.
+          This can be found at http://linux-lc100020.sourceforge.net/
+
+          To compile this driver as a module, choose M here: the
+          module will be called zd1201.
+
 source "drivers/net/wireless/hostap/Kconfig"
 source "drivers/net/wireless/bcm43xx/Kconfig"
 
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index c86779879361..512603de309a 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -40,3 +40,5 @@ obj-$(CONFIG_BCM43XX)		+= bcm43xx/
 # 16-bit wireless PCMCIA client drivers
 obj-$(CONFIG_PCMCIA_RAYCS)      += ray_cs.o
 obj-$(CONFIG_PCMCIA_WL3501)     += wl3501_cs.o
+
+obj-$(CONFIG_USB_ZD1201)        += zd1201.o
diff --git a/drivers/usb/net/zd1201.c b/drivers/net/wireless/zd1201.c
index 662ecc8a33ff..662ecc8a33ff 100644
--- a/drivers/usb/net/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
diff --git a/drivers/usb/net/zd1201.h b/drivers/net/wireless/zd1201.h
index 235f0ee34b24..235f0ee34b24 100644
--- a/drivers/usb/net/zd1201.h
+++ b/drivers/net/wireless/zd1201.h
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index efd6ca7e4ac5..054059632a21 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -301,21 +301,4 @@ config USB_NET_ZAURUS
           some cases CDC MDLM) protocol, not "g_ether".
 
 
-config USB_ZD1201
-        tristate "USB ZD1201 based Wireless device support"
-        depends on NET_RADIO
-        select FW_LOADER
-        ---help---
-          Say Y if you want to use wireless LAN adapters based on the ZyDAS
-          ZD1201 chip.
-
-          This driver makes the adapter appear as a normal Ethernet interface,
-          typically on wlan0.
-          
-          The zd1201 device requires external firmware to be loaded.
-          This can be found at http://linux-lc100020.sourceforge.net/
-          
-          To compile this driver as a module, choose M here: the
-          module will be called zd1201.
-
 endmenu
diff --git a/drivers/usb/net/Makefile b/drivers/usb/net/Makefile
index a21e6eaabaf6..160f19dbdf12 100644
--- a/drivers/usb/net/Makefile
+++ b/drivers/usb/net/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_USB_NET_RNDIS_HOST)	+= rndis_host.o
 obj-$(CONFIG_USB_NET_CDC_SUBSET)        += cdc_subset.o
 obj-$(CONFIG_USB_NET_ZAURUS)    += zaurus.o
 obj-$(CONFIG_USB_USBNET)        += usbnet.o
-obj-$(CONFIG_USB_ZD1201)        += zd1201.o
 
 ifeq ($(CONFIG_USB_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG