olpc: sdhci: add quirk for the Marvell CaFe's vdd/powerup issue

This has been sitting around unloved for way too long..

The Marvell CaFe chip's SD implementation chokes during card insertion
if one attempts to set the voltage and power up in the same
SDHCI_POWER_CONTROL register write.  This adds a quirk that does
that particular dance in two steps.

It also adds an entry to pci_ids.h for the CaFe chip's SD device.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 18 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 07c2048b230b..5b74c8cf4409 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -55,6 +55,8 @@ static unsigned int debug_quirks = 0;
 #define SDHCI_QUIRK_32BIT_DMA_SIZE                      (1<<7)
 /* Controller needs to be reset after each request to stay stable */
 #define SDHCI_QUIRK_RESET_AFTER_REQUEST                 (1<<8)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER             (1<<9)
 
 static const struct pci_device_id pci_ids[] __devinitdata = {
         {
@@ -128,6 +130,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
         },
 
         {
+                .vendor         = PCI_VENDOR_ID_MARVELL,
+                .device         = PCI_DEVICE_ID_MARVELL_CAFE_SD,
+                .subvendor      = PCI_ANY_ID,
+                .subdevice      = PCI_ANY_ID,
+                .driver_data    = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER,
+        },
+
+        {
                 .vendor         = PCI_VENDOR_ID_JMICRON,
                 .device         = PCI_DEVICE_ID_JMICRON_JMB38X_SD,
                 .subvendor      = PCI_ANY_ID,
@@ -774,6 +784,14 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
                 BUG();
         }
 
+        /*
+         * At least the CaFe chip gets confused if we set the voltage
+         * and set turn on power at the same time, so set the voltage first.
+         */
+        if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
+                writeb(pwr & ~SDHCI_POWER_ON,
+                                host->ioaddr + SDHCI_POWER_CONTROL);
+
         writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
 
 out: