[PATCH] libata: implement standard reset component operations and ->probe_reset

Implement SRST, COMRESET and standard postreset component operations
for ata_drive_probe_reset(), and use these three functions to
implement ata_std_probe_reset.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 206 insertions, 0 deletions

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index cf91fdc08ef6..b369dbd7cb23 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2233,6 +2233,208 @@ err_out:
         DPRINTK("EXIT\n");
 }
 
+/**
+ *      ata_std_softreset - reset host port via ATA SRST
+ *      @ap: port to reset
+ *      @verbose: fail verbosely
+ *      @classes: resulting classes of attached devices
+ *
+ *      Reset host port using ATA SRST.  This function is to be used
+ *      as standard callback for ata_drive_*_reset() functions.
+ *
+ *      LOCKING:
+ *      Kernel thread context (may sleep)
+ *
+ *      RETURNS:
+ *      0 on success, -errno otherwise.
+ */
+int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes)
+{
+        unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+        unsigned int devmask = 0, err_mask;
+        u8 err;
+
+        DPRINTK("ENTER\n");
+
+        /* determine if device 0/1 are present */
+        if (ata_devchk(ap, 0))
+                devmask |= (1 << 0);
+        if (slave_possible && ata_devchk(ap, 1))
+                devmask |= (1 << 1);
+
+        /* devchk reports device presence without actual device on
+         * most SATA controllers.  Check SStatus and turn devmask off
+         * if link is offline.  Note that we should continue resetting
+         * even when it seems like there's no device.
+         */
+        if (ap->ops->scr_read && !sata_dev_present(ap))
+                devmask = 0;
+
+        /* select device 0 again */
+        ap->ops->dev_select(ap, 0);
+
+        /* issue bus reset */
+        DPRINTK("about to softreset, devmask=%x\n", devmask);
+        err_mask = ata_bus_softreset(ap, devmask);
+        if (err_mask) {
+                if (verbose)
+                        printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n",
+                               ap->id, err_mask);
+                else
+                        DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n",
+                                err_mask);
+                return -EIO;
+        }
+
+        /* determine by signature whether we have ATA or ATAPI devices */
+        classes[0] = ata_dev_try_classify(ap, 0, &err);
+        if (slave_possible && err != 0x81)
+                classes[1] = ata_dev_try_classify(ap, 1, &err);
+
+        DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+        return 0;
+}
+
+/**
+ *      sata_std_hardreset - reset host port via SATA phy reset
+ *      @ap: port to reset
+ *      @verbose: fail verbosely
+ *      @class: resulting class of attached device
+ *
+ *      SATA phy-reset host port using DET bits of SControl register.
+ *      This function is to be used as standard callback for
+ *      ata_drive_*_reset().
+ *
+ *      LOCKING:
+ *      Kernel thread context (may sleep)
+ *
+ *      RETURNS:
+ *      0 on success, -errno otherwise.
+ */
+int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class)
+{
+        u32 sstatus, serror;
+        unsigned long timeout = jiffies + (HZ * 5);
+
+        DPRINTK("ENTER\n");
+
+        /* Issue phy wake/reset */
+        scr_write_flush(ap, SCR_CONTROL, 0x301);
+
+        /*
+         * Couldn't find anything in SATA I/II specs, but AHCI-1.1
+         * 10.4.2 says at least 1 ms.
+         */
+        msleep(1);
+
+        scr_write_flush(ap, SCR_CONTROL, 0x300);
+
+        /* Wait for phy to become ready, if necessary. */
+        do {
+                msleep(200);
+                sstatus = scr_read(ap, SCR_STATUS);
+                if ((sstatus & 0xf) != 1)
+                        break;
+        } while (time_before(jiffies, timeout));
+
+        /* Clear SError */
+        serror = scr_read(ap, SCR_ERROR);
+        scr_write(ap, SCR_ERROR, serror);
+
+        /* TODO: phy layer with polling, timeouts, etc. */
+        if (!sata_dev_present(ap)) {
+                *class = ATA_DEV_NONE;
+                DPRINTK("EXIT, link offline\n");
+                return 0;
+        }
+
+        if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
+                if (verbose)
+                        printk(KERN_ERR "ata%u: COMRESET failed "
+                               "(device not ready)\n", ap->id);
+                else
+                        DPRINTK("EXIT, device not ready\n");
+                return -EIO;
+        }
+
+        *class = ata_dev_try_classify(ap, 0, NULL);
+
+        DPRINTK("EXIT, class=%u\n", *class);
+        return 0;
+}
+
+/**
+ *      ata_std_postreset - standard postreset callback
+ *      @ap: the target ata_port
+ *      @classes: classes of attached devices
+ *
+ *      This function is invoked after a successful reset.  Note that
+ *      the device might have been reset more than once using
+ *      different reset methods before postreset is invoked.
+ *      postreset is also reponsible for setting cable type.
+ *
+ *      This function is to be used as standard callback for
+ *      ata_drive_*_reset().
+ *
+ *      LOCKING:
+ *      Kernel thread context (may sleep)
+ */
+void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
+{
+        DPRINTK("ENTER\n");
+
+        /* set cable type */
+        if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA)
+                ap->cbl = ATA_CBL_SATA;
+
+        /* print link status */
+        if (ap->cbl == ATA_CBL_SATA)
+                sata_print_link_status(ap);
+
+        /* bail out if no device is present */
+        if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+                DPRINTK("EXIT, no device\n");
+                return;
+        }
+
+        /* is double-select really necessary? */
+        if (classes[0] != ATA_DEV_NONE)
+                ap->ops->dev_select(ap, 1);
+        if (classes[1] != ATA_DEV_NONE)
+                ap->ops->dev_select(ap, 0);
+
+        /* re-enable interrupts & set up device control */
+        if (ap->ioaddr.ctl_addr)        /* FIXME: hack. create a hook instead */
+                ata_irq_on(ap);
+
+        DPRINTK("EXIT\n");
+}
+
+/**
+ *      ata_std_probe_reset - standard probe reset method
+ *      @ap: prot to perform probe-reset
+ *      @classes: resulting classes of attached devices
+ *
+ *      The stock off-the-shelf ->probe_reset method.
+ *
+ *      LOCKING:
+ *      Kernel thread context (may sleep)
+ *
+ *      RETURNS:
+ *      0 on success, -errno otherwise.
+ */
+int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes)
+{
+        ata_reset_fn_t hardreset;
+
+        hardreset = NULL;
+        if (ap->cbl == ATA_CBL_SATA && ap->ops->scr_read)
+                hardreset = sata_std_hardreset;
+
+        return ata_drive_probe_reset(ap, ata_std_softreset, hardreset,
+                                     ata_std_postreset, classes);
+}
+
 static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset,
                           ata_postreset_fn_t postreset,
                           unsigned int *classes)
@@ -5268,6 +5470,10 @@ EXPORT_SYMBOL_GPL(ata_port_probe);
 EXPORT_SYMBOL_GPL(sata_phy_reset);
 EXPORT_SYMBOL_GPL(__sata_phy_reset);
 EXPORT_SYMBOL_GPL(ata_bus_reset);
+EXPORT_SYMBOL_GPL(ata_std_softreset);
+EXPORT_SYMBOL_GPL(sata_std_hardreset);
+EXPORT_SYMBOL_GPL(ata_std_postreset);
+EXPORT_SYMBOL_GPL(ata_std_probe_reset);
 EXPORT_SYMBOL_GPL(ata_drive_probe_reset);
 EXPORT_SYMBOL_GPL(ata_port_disable);
 EXPORT_SYMBOL_GPL(ata_ratelimit);