Merge of master.kernel.org:/home/rmk/linux-2.6-serial.git

1 files changed, 60 insertions, 8 deletions

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index c682c6308cde..01a8726a3f97 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -321,18 +321,39 @@ static void imx_break_ctl(struct uart_port *port, int break_state)
 #define TXTL 2 /* reset default */
 #define RXTL 1 /* reset default */
 
+static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
+{
+        unsigned int val;
+        unsigned int ufcr_rfdiv;
+
+        /* set receiver / transmitter trigger level.
+         * RFDIV is set such way to satisfy requested uartclk value
+         */
+        val = TXTL<<10 | RXTL;
+        ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk;
+
+        if(!ufcr_rfdiv)
+                ufcr_rfdiv = 1;
+
+        if(ufcr_rfdiv >= 7)
+                ufcr_rfdiv = 6;
+        else
+                ufcr_rfdiv = 6 - ufcr_rfdiv;
+
+        val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
+
+        UFCR((u32)sport->port.membase) = val;
+
+        return 0;
+}
+
 static int imx_startup(struct uart_port *port)
 {
         struct imx_port *sport = (struct imx_port *)port;
         int retval;
-        unsigned int val;
         unsigned long flags;
 
-        /* set receiver / transmitter trigger level. We assume
-         * that RFDIV has been set by the arch setup or by the bootloader.
-         */
-        val = (UFCR((u32)sport->port.membase) & UFCR_RFDIV)  | TXTL<<10 | RXTL;
-        UFCR((u32)sport->port.membase) = val;
+        imx_setup_ufcr(sport, 0);
 
         /* disable the DREN bit (Data Ready interrupt enable) before
          * requesting IRQs
@@ -737,9 +758,12 @@ static void __init
 imx_console_get_options(struct imx_port *sport, int *baud,
                            int *parity, int *bits)
 {
+
         if ( UCR1((u32)sport->port.membase) | UCR1_UARTEN ) {
                 /* ok, the port was enabled */
                 unsigned int ucr2, ubir,ubmr, uartclk;
+                unsigned int baud_raw;
+                unsigned int ucfr_rfdiv;
 
                 ucr2 = UCR2((u32)sport->port.membase);
 
@@ -758,9 +782,35 @@ imx_console_get_options(struct imx_port *sport, int *baud,
 
                 ubir = UBIR((u32)sport->port.membase) & 0xffff;
                 ubmr = UBMR((u32)sport->port.membase) & 0xffff;
-                uartclk = sport->port.uartclk;
 
-                *baud = ((uartclk/16) * (ubir + 1)) / (ubmr + 1);
+
+                ucfr_rfdiv = (UFCR((u32)sport->port.membase) & UFCR_RFDIV) >> 7;
+                if (ucfr_rfdiv == 6)
+                        ucfr_rfdiv = 7;
+                else
+                        ucfr_rfdiv = 6 - ucfr_rfdiv;
+
+                uartclk = imx_get_perclk1();
+                uartclk /= ucfr_rfdiv;
+
+                {       /*
+                         * The next code provides exact computation of
+                         *   baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
+                         * without need of float support or long long division,
+                         * which would be required to prevent 32bit arithmetic overflow
+                         */
+                        unsigned int mul = ubir + 1;
+                        unsigned int div = 16 * (ubmr + 1);
+                        unsigned int rem = uartclk % div;
+
+                        baud_raw = (uartclk / div) * mul;
+                        baud_raw += (rem * mul + div / 2) / div;
+                        *baud = (baud_raw + 50) / 100 * 100;
+                }
+
+                if(*baud != baud_raw)
+                        printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n",
+                                baud_raw, *baud);
         }
 }
 
@@ -787,6 +837,8 @@ imx_console_setup(struct console *co, char *options)
         else
                 imx_console_get_options(sport, &baud, &parity, &bits);
 
+        imx_setup_ufcr(sport, 0);
+
         return uart_set_options(&sport->port, co, baud, parity, bits, flow);
 }