[media] V4L: mt9v022: remove superfluous soc-camera client operations

Now that all soc-camera hosts have been ported to use V4L2 subdevice
mediabus-config operations and soc-camera client bus-parameter operations
have been made optional, they can be removed.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 74 deletions

diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index ddc11d0a6254..53149a73874b 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -200,78 +200,6 @@ static int mt9v022_s_stream(struct v4l2_subdev *sd, int enable)
         return 0;
 }
 
-static int mt9v022_set_bus_param(struct soc_camera_device *icd,
-                                 unsigned long flags)
-{
-        struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-        struct mt9v022 *mt9v022 = to_mt9v022(client);
-        struct soc_camera_link *icl = to_soc_camera_link(icd);
-        unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK;
-        int ret;
-        u16 pixclk = 0;
-
-        /* Only one width bit may be set */
-        if (!is_power_of_2(width_flag))
-                return -EINVAL;
-
-        if (icl->set_bus_param) {
-                ret = icl->set_bus_param(icl, width_flag);
-                if (ret)
-                        return ret;
-        } else {
-                /*
-                 * Without board specific bus width settings we only support the
-                 * sensors native bus width
-                 */
-                if (width_flag != SOCAM_DATAWIDTH_10)
-                        return -EINVAL;
-        }
-
-        flags = soc_camera_apply_sensor_flags(icl, flags);
-
-        if (flags & SOCAM_PCLK_SAMPLE_FALLING)
-                pixclk |= 0x10;
-
-        if (!(flags & SOCAM_HSYNC_ACTIVE_HIGH))
-                pixclk |= 0x1;
-
-        if (!(flags & SOCAM_VSYNC_ACTIVE_HIGH))
-                pixclk |= 0x2;
-
-        ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
-        if (ret < 0)
-                return ret;
-
-        if (!(flags & SOCAM_MASTER))
-                mt9v022->chip_control &= ~0x8;
-
-        ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
-        if (ret < 0)
-                return ret;
-
-        dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
-                pixclk, mt9v022->chip_control);
-
-        return 0;
-}
-
-static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
-{
-        struct soc_camera_link *icl = to_soc_camera_link(icd);
-        unsigned int flags = SOCAM_MASTER | SOCAM_SLAVE |
-                SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
-                SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
-                SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
-                SOCAM_DATA_ACTIVE_HIGH;
-
-        if (icl->query_bus_param)
-                flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
-        else
-                flags |= SOCAM_DATAWIDTH_10;
-
-        return soc_camera_apply_sensor_flags(icl, flags);
-}
-
 static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
         struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -558,8 +486,6 @@ static const struct v4l2_queryctrl mt9v022_controls[] = {
 };
 
 static struct soc_camera_ops mt9v022_ops = {
-        .set_bus_param          = mt9v022_set_bus_param,
-        .query_bus_param        = mt9v022_query_bus_param,
         .controls               = mt9v022_controls,
         .num_controls           = ARRAY_SIZE(mt9v022_controls),
 };