[SCSI] lpfc 8.3.24: Add request-firmware support

Add request-firmware support:
- Add support for request_firmware interface for INTF2 SLI4 ports.
- Add ability to reset SLI4 INTF2 ports.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>

5 files changed, 259 insertions, 11 deletions

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 6ecd6daffc15..135a53baa735 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -755,18 +755,18 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_sli4_fw_dump_request - Request firmware to perform a firmware dump
+ * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc
  * @phba: lpfc_hba pointer.
  *
  * Description:
- * Request SLI4 interface type-2 device to perform a dump of firmware dump
- * object into it's /dbg directory of the flash file system.
+ * Request SLI4 interface type-2 device to perform a physical register set
+ * access.
  *
  * Returns:
  * zero for success
  **/
 static ssize_t
-lpfc_sli4_fw_dump_request(struct lpfc_hba *phba)
+lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 {
         struct completion online_compl;
         uint32_t reg_val;
@@ -776,6 +776,11 @@ lpfc_sli4_fw_dump_request(struct lpfc_hba *phba)
         if (!phba->cfg_enable_hba_reset)
                 return -EIO;
 
+        if ((phba->sli_rev < LPFC_SLI_REV4) ||
+            (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+             LPFC_SLI_INTF_IF_TYPE_2))
+                return -EPERM;
+
         status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
 
         if (status != 0)
@@ -786,7 +791,14 @@ lpfc_sli4_fw_dump_request(struct lpfc_hba *phba)
 
         reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +
                         LPFC_CTL_PDEV_CTL_OFFSET);
-        reg_val |= LPFC_FW_DUMP_REQUEST;
+
+        if (opcode == LPFC_FW_DUMP)
+                reg_val |= LPFC_FW_DUMP_REQUEST;
+        else if (opcode == LPFC_FW_RESET)
+                reg_val |= LPFC_CTL_PDEV_CTL_FRST;
+        else if (opcode == LPFC_DV_RESET)
+                reg_val |= LPFC_CTL_PDEV_CTL_DRST;
+
         writel(reg_val, phba->sli4_hba.conf_regs_memmap_p +
                LPFC_CTL_PDEV_CTL_OFFSET);
         /* flush */
@@ -904,12 +916,11 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
                 else
                         status = lpfc_do_offline(phba, LPFC_EVT_KILL);
         else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0)
-                if ((phba->sli_rev < LPFC_SLI_REV4) ||
-                    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
-                     LPFC_SLI_INTF_IF_TYPE_2))
-                        return -EPERM;
-                else
-                        status = lpfc_sli4_fw_dump_request(phba);
+                status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP);
+        else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0)
+                status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET);
+        else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0)
+                status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET);
         else
                 return -EINVAL;
 
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 3b9a6152b7f9..0b63cb2610d0 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -430,5 +430,6 @@ void lpfc_cleanup_wt_rrqs(struct lpfc_hba *);
 void lpfc_cleanup_vports_rrqs(struct lpfc_vport *, struct lpfc_nodelist *);
 struct lpfc_node_rrq *lpfc_get_active_rrq(struct lpfc_vport *, uint16_t,
         uint32_t);
+int lpfc_wr_object(struct lpfc_hba *, struct list_head *, uint32_t, uint32_t *);
 /* functions to support SR-IOV */
 int lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *, int);
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 115915d4a60a..61a40fd1ad18 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -821,6 +821,7 @@ struct mbox_header {
 #define LPFC_MBOX_OPCODE_MQ_CREATE_EXT          0x5A
 #define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG    0xA0
 #define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG     0xA4
+#define LPFC_MBOX_OPCODE_WRITE_OBJECT           0xAC
 #define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS    0xB5
 
 /* FCoE Opcodes */
@@ -2372,6 +2373,29 @@ struct lpfc_mbx_get_prof_cfg {
 #define MB_CEQ_STATUS_QUEUE_FLUSHING            0x4
 #define MB_CQE_STATUS_DMA_FAILED                0x5
 
+#define LPFC_MBX_WR_CONFIG_MAX_BDE              8
+struct lpfc_mbx_wr_object {
+        struct mbox_header header;
+        union {
+                struct {
+                        uint32_t word4;
+#define lpfc_wr_object_eof_SHIFT                31
+#define lpfc_wr_object_eof_MASK                 0x00000001
+#define lpfc_wr_object_eof_WORD                 word4
+#define lpfc_wr_object_write_length_SHIFT       0
+#define lpfc_wr_object_write_length_MASK        0x00FFFFFF
+#define lpfc_wr_object_write_length_WORD        word4
+                        uint32_t write_offset;
+                        uint32_t object_name[26];
+                        uint32_t bde_count;
+                        struct ulp_bde64 bde[LPFC_MBX_WR_CONFIG_MAX_BDE];
+                } request;
+                struct {
+                        uint32_t actual_write_length;
+                } response;
+        } u;
+};
+
 /* mailbox queue entry structure */
 struct lpfc_mqe {
         uint32_t word0;
@@ -2421,6 +2445,7 @@ struct lpfc_mqe {
                 struct lpfc_mbx_get_func_cfg get_func_cfg;
                 struct lpfc_mbx_get_prof_cfg get_prof_cfg;
                 struct lpfc_mbx_nop nop;
+                struct lpfc_mbx_wr_object wr_object;
         } un;
 };
 
@@ -2966,9 +2991,28 @@ union lpfc_wqe {
         struct gen_req64_wqe gen_req;
 };
 
+#define LPFC_GROUP_OJECT_MAGIC_NUM              0xfeaa0001
+#define LPFC_FILE_TYPE_GROUP                    0xf7
+#define LPFC_FILE_ID_GROUP                      0xa2
+struct lpfc_grp_hdr {
+        uint32_t size;
+        uint32_t magic_number;
+        uint32_t word2;
+#define lpfc_grp_hdr_file_type_SHIFT    24
+#define lpfc_grp_hdr_file_type_MASK     0x000000FF
+#define lpfc_grp_hdr_file_type_WORD     word2
+#define lpfc_grp_hdr_id_SHIFT           16
+#define lpfc_grp_hdr_id_MASK            0x000000FF
+#define lpfc_grp_hdr_id_WORD            word2
+        uint8_t rev_name[128];
+};
+
 #define FCP_COMMAND 0x0
 #define FCP_COMMAND_DATA_OUT 0x1
 #define ELS_COMMAND_NON_FIP 0xC
 #define ELS_COMMAND_FIP 0xD
 #define OTHER_COMMAND 0x8
 
+#define LPFC_FW_DUMP    1
+#define LPFC_FW_RESET   2
+#define LPFC_DV_RESET   3
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index e81912cd257e..2b535cff4b2a 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -30,6 +30,7 @@
 #include <linux/ctype.h>
 #include <linux/aer.h>
 #include <linux/slab.h>
+#include <linux/firmware.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
@@ -8775,6 +8776,97 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_write_firmware - attempt to write a firmware image to the port
+ * @phba: pointer to lpfc hba data structure.
+ * @fw: pointer to firmware image returned from request_firmware.
+ *
+ * returns the number of bytes written if write is successful.
+ * returns a negative error value if there were errors.
+ * returns 0 if firmware matches currently active firmware on port.
+ **/
+int
+lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
+{
+        char fwrev[32];
+        struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data;
+        struct list_head dma_buffer_list;
+        int i, rc = 0;
+        struct lpfc_dmabuf *dmabuf, *next;
+        uint32_t offset = 0, temp_offset = 0;
+
+        INIT_LIST_HEAD(&dma_buffer_list);
+        if ((image->magic_number != LPFC_GROUP_OJECT_MAGIC_NUM) ||
+            (bf_get(lpfc_grp_hdr_file_type, image) != LPFC_FILE_TYPE_GROUP) ||
+            (bf_get(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) ||
+            (image->size != fw->size)) {
+                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+                                "3022 Invalid FW image found. "
+                                "Magic:%d Type:%x ID:%x\n",
+                                image->magic_number,
+                                bf_get(lpfc_grp_hdr_file_type, image),
+                                bf_get(lpfc_grp_hdr_id, image));
+                return -EINVAL;
+        }
+        lpfc_decode_firmware_rev(phba, fwrev, 1);
+        if (strncmp(fwrev, image->rev_name, strnlen(fwrev, 16))) {
+                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+                                "3023 Updating Firmware. Current Version:%s "
+                                "New Version:%s\n",
+                                fwrev, image->rev_name);
+                for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
+                        dmabuf = kzalloc(sizeof(struct lpfc_dmabuf),
+                                         GFP_KERNEL);
+                        if (!dmabuf) {
+                                rc = -ENOMEM;
+                                goto out;
+                        }
+                        dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+                                                          SLI4_PAGE_SIZE,
+                                                          &dmabuf->phys,
+                                                          GFP_KERNEL);
+                        if (!dmabuf->virt) {
+                                kfree(dmabuf);
+                                rc = -ENOMEM;
+                                goto out;
+                        }
+                        list_add_tail(&dmabuf->list, &dma_buffer_list);
+                }
+                while (offset < fw->size) {
+                        temp_offset = offset;
+                        list_for_each_entry(dmabuf, &dma_buffer_list, list) {
+                                if (offset + SLI4_PAGE_SIZE > fw->size) {
+                                        temp_offset += fw->size - offset;
+                                        memcpy(dmabuf->virt,
+                                               fw->data + temp_offset,
+                                               fw->size - offset);
+                                        break;
+                                }
+                                temp_offset += SLI4_PAGE_SIZE;
+                                memcpy(dmabuf->virt, fw->data + temp_offset,
+                                       SLI4_PAGE_SIZE);
+                        }
+                        rc = lpfc_wr_object(phba, &dma_buffer_list,
+                                    (fw->size - offset), &offset);
+                        if (rc) {
+                                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+                                                "3024 Firmware update failed. "
+                                                "%d\n", rc);
+                                goto out;
+                        }
+                }
+                rc = offset;
+        }
+out:
+        list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
+                list_del(&dmabuf->list);
+                dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE,
+                                  dmabuf->virt, dmabuf->phys);
+                kfree(dmabuf);
+        }
+        return rc;
+}
+
+/**
  * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
  * @pdev: pointer to PCI device
  * @pid: pointer to PCI device identifier
@@ -8803,6 +8895,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
         int mcnt;
         int adjusted_fcp_eq_count;
         int fcp_qidx;
+        const struct firmware *fw;
+        uint8_t file_name[16];
 
         /* Allocate memory for HBA structure */
         phba = lpfc_hba_alloc(pdev);
@@ -8957,6 +9051,14 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
         /* Perform post initialization setup */
         lpfc_post_init_setup(phba);
 
+        /* check for firmware upgrade or downgrade */
+        snprintf(file_name, 16, "%s.grp", phba->ModelName);
+        error = request_firmware(&fw, file_name, &phba->pcidev->dev);
+        if (!error) {
+                lpfc_write_firmware(phba, fw);
+                release_firmware(fw);
+        }
+
         /* Check if there are static vports to be created. */
         lpfc_create_static_vport(phba);
 
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index dd911d6d0ee5..fcfa8c8cfb67 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -13500,6 +13500,96 @@ out:
 }
 
 /**
+ * lpfc_wr_object - write an object to the firmware
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @dmabuf_list: list of dmabufs to write to the port.
+ * @size: the total byte value of the objects to write to the port.
+ * @offset: the current offset to be used to start the transfer.
+ *
+ * This routine will create a wr_object mailbox command to send to the port.
+ * the mailbox command will be constructed using the dma buffers described in
+ * @dmabuf_list to create a list of BDEs. This routine will fill in as many
+ * BDEs that the imbedded mailbox can support. The @offset variable will be
+ * used to indicate the starting offset of the transfer and will also return
+ * the offset after the write object mailbox has completed. @size is used to
+ * determine the end of the object and whether the eof bit should be set.
+ *
+ * Return 0 is successful and offset will contain the the new offset to use
+ * for the next write.
+ * Return negative value for error cases.
+ **/
+int
+lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
+               uint32_t size, uint32_t *offset)
+{
+        struct lpfc_mbx_wr_object *wr_object;
+        LPFC_MBOXQ_t *mbox;
+        int rc = 0, i = 0;
+        uint32_t shdr_status, shdr_add_status;
+        uint32_t mbox_tmo;
+        union lpfc_sli4_cfg_shdr *shdr;
+        struct lpfc_dmabuf *dmabuf;
+        uint32_t written = 0;
+
+        mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+        if (!mbox)
+                return -ENOMEM;
+
+        lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+                        LPFC_MBOX_OPCODE_WRITE_OBJECT,
+                        sizeof(struct lpfc_mbx_wr_object) -
+                        sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED);
+
+        wr_object = (struct lpfc_mbx_wr_object *)&mbox->u.mqe.un.wr_object;
+        wr_object->u.request.write_offset = *offset;
+        sprintf((uint8_t *)wr_object->u.request.object_name, "/");
+        wr_object->u.request.object_name[0] =
+                cpu_to_le32(wr_object->u.request.object_name[0]);
+        bf_set(lpfc_wr_object_eof, &wr_object->u.request, 0);
+        list_for_each_entry(dmabuf, dmabuf_list, list) {
+                if (i >= LPFC_MBX_WR_CONFIG_MAX_BDE || written >= size)
+                        break;
+                wr_object->u.request.bde[i].addrLow = putPaddrLow(dmabuf->phys);
+                wr_object->u.request.bde[i].addrHigh =
+                        putPaddrHigh(dmabuf->phys);
+                if (written + SLI4_PAGE_SIZE >= size) {
+                        wr_object->u.request.bde[i].tus.f.bdeSize =
+                                (size - written);
+                        written += (size - written);
+                        bf_set(lpfc_wr_object_eof, &wr_object->u.request, 1);
+                } else {
+                        wr_object->u.request.bde[i].tus.f.bdeSize =
+                                SLI4_PAGE_SIZE;
+                        written += SLI4_PAGE_SIZE;
+                }
+                i++;
+        }
+        wr_object->u.request.bde_count = i;
+        bf_set(lpfc_wr_object_write_length, &wr_object->u.request, written);
+        if (!phba->sli4_hba.intr_enable)
+                rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+        else {
+                mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+                rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+        }
+        /* The IOCTL status is embedded in the mailbox subheader. */
+        shdr = (union lpfc_sli4_cfg_shdr *) &wr_object->header.cfg_shdr;
+        shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+        shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+        if (rc != MBX_TIMEOUT)
+                mempool_free(mbox, phba->mbox_mem_pool);
+        if (shdr_status || shdr_add_status || rc) {
+                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+                                "3025 Write Object mailbox failed with "
+                                "status x%x add_status x%x, mbx status x%x\n",
+                                shdr_status, shdr_add_status, rc);
+                rc = -ENXIO;
+        } else
+                *offset += wr_object->u.response.actual_write_length;
+        return rc;
+}
+
+/**
  * lpfc_cleanup_pending_mbox - Free up vport discovery mailbox commands.
  * @vport: pointer to vport data structure.
  *